Makefile.in

   1 # NOTE: If you have no `make' program at all to process this makefile, run
   2 # `build.sh' instead.
   3 #
   4 # Copyright (C) 1988,89,91,92,93,94,95,96 Free Software Foundation, Inc.
   5 # This file is part of GNU Make.
   6 #
   7 # GNU Make is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2, or (at your option)
  10 # any later version.
  11 #
  12 # GNU Make is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Make; see the file COPYING.  If not, write to
  19 # the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  20
  21 #
  22 #       Makefile for GNU Make
  23 #
  24
  25 # Ultrix 2.2 make doesn't expand the value of VPATH.
  26 VPATH = @srcdir@
  27 # This must repeat the value, because configure will remove `VPATH = .'.
  28 srcdir = @srcdir@
  29
  30 CC = @CC@
  31
  32 CFLAGS = @CFLAGS@
  33 CPPFLAGS = @CPPFLAGS@
  34 LDFLAGS = @LDFLAGS@
  35
  36 # Define these for your system as follows:
  37 #       -DNO_ARCHIVES           To disable `ar' archive support.
  38 #       -DNO_FLOAT              To avoid using floating-point numbers.
  39 #       -DENUM_BITFIELDS        If the compiler isn't GCC but groks enum foo:2.
  40 #                               Some compilers apparently accept this
  41 #                               without complaint but produce losing code,
  42 #                               so beware.
  43 # NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
  44 # See also `config.h'.
  45 defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
  46
  47 # Which flavor of remote job execution support to use.
  48 # The code is found in `remote-$(REMOTE).c'.
  49 REMOTE = @REMOTE@
  50
  51 # If your system doesn't have alloca, or the one provided is bad, define this.
  52 ALLOCA = @ALLOCA@
  53 ALLOCA_SRC = $(srcdir)/alloca.c
  54
  55 # If your system needs extra libraries loaded in, define them here.
  56 # System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
  57 # libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
  58 # alloca.c instead on those machines.
  59 LOADLIBES = @LIBS@
  60
  61 # Any extra object files your system needs.
  62 extras = @LIBOBJS@
  63
  64 # Common prefix for machine-independent installed files.
  65 prefix = @prefix@
  66 # Common prefix for machine-dependent installed files.
  67 exec_prefix = @exec_prefix@
  68
  69 # Directory to install `make' in.
  70 bindir = $(exec_prefix)/bin
  71 # Directory to find libraries in for `-lXXX'.
  72 libdir = $(exec_prefix)/lib
  73 # Directory to search by default for included makefiles.
  74 includedir = $(prefix)/include
  75 # Directory to install the Info files in.
  76 infodir = $(prefix)/info
  77 # Directory to install the man page in.
  78 mandir = $(prefix)/man/man$(manext)
  79 # Number to put on the man page filename.
  80 manext = 1
  81 # Prefix to put on installed `make' binary file name.
  82 binprefix =
  83 # Prefix to put on installed `make' man page file name.
  84 manprefix = $(binprefix)
  85
  86 # Whether or not make needs to be installed setgid.
  87 # The value should be either `true' or `false'.
  88 # On many systems, the getloadavg function (used to implement the `-l'
  89 # switch) will not work unless make is installed setgid kmem.
  90 install_setgid = @NEED_SETGID@
  91 # Install make setgid to this group so it can read /dev/kmem.
  92 group = @KMEM_GROUP@
  93
  94 # Program to install `make'.
  95 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  96 # Program to install the man page.
  97 INSTALL_DATA = @INSTALL_DATA@
  98 # Generic install program.
  99 INSTALL = @INSTALL@
 100
 101 # Program to format Texinfo source into Info files.
 102 MAKEINFO = makeinfo
 103 # Program to format Texinfo source into DVI files.
 104 TEXI2DVI = texi2dvi
 105
 106 # Programs to make tags files.
 107 ETAGS = etags -w
 108 CTAGS = ctags -w
 109
 110 objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o      \
 111        rule.o implicit.o default.o variable.o expand.o function.o       \
 112        vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o     \
 113        getopt.o getopt1.o glob/libglob.a                                \
 114        $(ALLOCA) $(extras)
 115 srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c             \
 116        $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c         \
 117        $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c             \
 118        $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c        \
 119        $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c     \
 120        $(srcdir)/vpath.c $(srcdir)/version.c                            \
 121        $(srcdir)/remote-$(REMOTE).c                                     \
 122        $(srcdir)/ar.c $(srcdir)/arscan.c                                \
 123        $(srcdir)/signame.c $(srcdir)/signame.h                          \
 124        $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h        \
 125        $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/filedef.h         \
 126        $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h                \
 127        $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
 128
 129
 130 .SUFFIXES:
 131 .SUFFIXES: .o .c .h .ps .dvi .info .texinfo
 132
 133 all: make
 134 info: make.info
 135 dvi: make.dvi
 136 # Some makes apparently use .PHONY as the default goal if it is before `all'.
 137 .PHONY: all check info dvi
 138
 139 make.info: make.texinfo
 140         $(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
 141
 142 make.dvi: make.texinfo
 143         $(TEXI2DVI) $(srcdir)/make.texinfo
 144
 145 make.ps: make.dvi
 146         dvi2ps make.dvi > make.ps
 147
 148 make: $(objs)
 149         $(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
 150         mv -f make.new make
 151
 152 # -I. is needed to find config.h in the build directory.
 153 .c.o:
 154         $(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
 155               $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
 156
 157 # For some losing Unix makes.
 158 SHELL = /bin/sh
 159 @SET_MAKE@
 160
 161 glob/libglob.a: FORCE config.h
 162         cd glob; $(MAKE) libglob.a
 163 FORCE:
 164
 165 tagsrcs = $(srcs) $(srcdir)/remote-*.c
 166 TAGS: $(tagsrcs)
 167         $(ETAGS) $(tagsrcs)
 168 tags: $(tagsrcs)
 169         $(CTAGS) $(tagsrcs)
 170
 171 .PHONY: install installdirs
 172 install: installdirs \
 173          $(bindir)/$(binprefix)make $(infodir)/make.info \
 174          $(mandir)/$(manprefix)make.$(manext)
 175
 176 installdirs:
 177         $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
 178
 179 $(bindir)/$(binprefix)make: make
 180         $(INSTALL_PROGRAM) make $@.new
 181         @if $(install_setgid); then \
 182            if chgrp $(group) $@.new && chmod g+s $@.new; then \
 183              echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
 184            else \
 185              echo "$@ needs to be owned by group $(group) and setgid;"; \
 186              echo "otherwise the \`-l' option will probably not work."; \
 187              echo "You may need special privileges to install $@."; \
 188            fi; \
 189          else true; fi
 190 # Some systems can't deal with renaming onto a running binary.
 191         -rm -f $@.old
 192         -mv $@ $@.old
 193         mv $@.new $@
 194
 195 $(infodir)/make.info: make.info
 196         if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
 197         for file in $${dir}/make.info*; do \
 198           name="`basename $$file`"; \
 199           $(INSTALL_DATA) $$file \
 200             `echo $@ | sed "s,make.info\$$,$$name,"`; \
 201         done
 202 # Run install-info only if it exists.
 203 # Use `if' instead of just prepending `-' to the
 204 # line so we notice real errors from install-info.
 205 # We use `$(SHELL) -c' because some shells do not
 206 # fail gracefully when there is an unknown command.
 207         if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
 208           if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
 209           install-info --infodir=$(infodir) $$dir/make.info; \
 210         else true; fi
 211
 212 $(mandir)/$(manprefix)make.$(manext): make.man
 213         $(INSTALL_DATA) $(srcdir)/make.man $@
 214
 215
 216 loadavg: loadavg.c config.h
 217         $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
 218               loadavg.c $(LOADLIBES) -o $@
 219 # We copy getloadavg.c into a different file rather than compiling it
 220 # directly because some compilers clobber getloadavg.o in the process.
 221 loadavg.c: getloadavg.c
 222         ln $(srcdir)/getloadavg.c loadavg.c || \
 223         cp $(srcdir)/getloadavg.c loadavg.c
 224 check-loadavg: loadavg
 225         @echo The system uptime program believes the load average to be:
 226         -uptime
 227         @echo The GNU load average checking code believes:
 228         ./loadavg
 229 check: check-loadavg
 230
 231
 232 .PHONY: clean realclean distclean mostlyclean
 233 clean: glob-clean
 234         -rm -f make loadavg *.o core make.dvi
 235 distclean: clean glob-realclean
 236         -rm -f Makefile config.h config.status build.sh stamp-config
 237         -rm -f config.log config.cache
 238         -rm -f TAGS tags
 239         -rm -f make.?? make.??s make.log make.toc make.*aux
 240         -rm -f loadavg.c
 241 realclean: distclean
 242         -rm -f make.info*
 243 mostlyclean: clean
 244
 245 .PHONY: glob-clean glob-realclean
 246 glob-clean glob-realclean:
 247         cd glob; $(MAKE) $@
 248
 249 Makefile: config.status $(srcdir)/Makefile.in
 250         $(SHELL) config.status
 251 glob/Makefile: config.status $(srcdir)/glob/Makefile.in
 252         $(SHELL) config.status
 253 config.h: stamp-config ;
 254 stamp-config: config.status $(srcdir)/config.h.in
 255         $(SHELL) config.status
 256         touch stamp-config
 257
 258 #configure: configure.in aclocal.m4
 259 #       cd $(srcdir) && autoconf $(ACFLAGS)
 260 #config.h.in: configure.in aclocal.m4
 261 #       cd $(srcdir) && autoheader $(ACFLAGS)
 262
 263 # This tells versions [3.59,3.63) of GNU make not to export all variables.
 264 .NOEXPORT:
 265
 266 # The automatically generated dependencies below may omit config.h
 267 # because it is included with ``#include <config.h>'' rather than
 268 # ``#include "config.h"''.  So we add the explicit dependency to make sure.
 269 $(objs): config.h
 270
 271 # Automatically generated dependencies will be put at the end of the file.
 272
 273 # Automatically generated dependencies.
 274 commands.o: commands.c make.h dep.h filedef.h variable.h job.h \
 275  commands.h
 276 job.o: job.c make.h job.h filedef.h commands.h variable.h
 277 dir.o: dir.c make.h
 278 file.o: file.c make.h dep.h filedef.h job.h commands.h variable.h
 279 misc.o: misc.c make.h dep.h
 280 main.o: main.c make.h dep.h filedef.h variable.h job.h commands.h \
 281  getopt.h
 282 read.o: read.c make.h dep.h filedef.h job.h commands.h variable.h \
 283  glob/glob.h
 284 remake.o: remake.c make.h filedef.h job.h commands.h dep.h
 285 rule.o: rule.c make.h dep.h filedef.h job.h commands.h variable.h \
 286  rule.h
 287 implicit.o: implicit.c make.h rule.h dep.h filedef.h
 288 default.o: default.c make.h rule.h dep.h filedef.h job.h commands.h \
 289  variable.h
 290 variable.o: variable.c make.h dep.h filedef.h job.h commands.h \
 291  variable.h
 292 expand.o: expand.c make.h filedef.h job.h commands.h variable.h
 293 function.o: function.c make.h filedef.h variable.h dep.h job.h \
 294  commands.h
 295 vpath.o: vpath.c make.h filedef.h variable.h
 296 version.o: version.c
 297 ar.o: ar.c make.h filedef.h dep.h
 298 arscan.o: arscan.c make.h
 299 signame.o: signame.c signame.h
 300 remote-stub.o: remote-stub.c make.h filedef.h job.h commands.h
 301 getopt.o: getopt.c
 302 getopt1.o: getopt1.c getopt.h
 303 getloadavg.o: getloadavg.c