firmware/export/config/mpiohd200.h

   1 /*
   2  * This config file is for MPIO HD200
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 69
   8
   9 #define MODEL_NAME   "MPIO HD200"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13 #define HAVE_LBA48
  14 #define ATA_SWAP_WORDS
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20  *  explicitly if different
  21  */
  22 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  23
  24 /* define the bitmask of hardware sample rates */
  25 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  26
  27 /* define the bitmask of recording sample rates */
  28 #define REC_SAMPR_CAPS  (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
  29
  30 /* define this if you have a bitmap LCD display */
  31 #define HAVE_LCD_BITMAP
  32
  33 /* define this if you want album art for this target */
  34 #define HAVE_ALBUMART
  35
  36 /* define this to enable bitmap scaling */
  37 #define HAVE_BMP_SCALING
  38
  39 /* define this to enable JPEG decoding */
  40 #define HAVE_JPEG
  41
  42 /* define this if you can flip your LCD */
  43 #define HAVE_LCD_FLIP
  44
  45 /* define this if you can invert the colours on your LCD */
  46 #define HAVE_LCD_INVERT
  47
  48 /* define this if you have access to the quickscreen */
  49 /* #define HAVE_QUICKSCREEN */
  50
  51 /* define this if you have access to the pitchscreen */
  52 #define HAVE_PITCHSCREEN
  53
  54 /* define this if you would like tagcache to build on this target */
  55 #define HAVE_TAGCACHE
  56
  57 /* LCD dimensions */
  58 #define LCD_WIDTH  128
  59 #define LCD_HEIGHT 128
  60 #define LCD_DEPTH  2
  61
  62 #define LCD_PIXELFORMAT VERTICAL_INTERLEAVED
  63
  64 /* Display colours, for screenshots and sim (0xRRGGBB) */
  65 #define LCD_DARKCOLOR       0x000000
  66 #define LCD_BRIGHTCOLOR     0x5a915a
  67 #define LCD_BL_DARKCOLOR    0x000000
  68 #define LCD_BL_BRIGHTCOLOR  0x82b4fa
  69
  70 #define CONFIG_KEYPAD MPIO_HD200_PAD
  71
  72 /* Define this if you do software codec */
  73 #define CONFIG_CODEC SWCODEC
  74
  75 #define CONFIG_LCD LCD_TL0350A
  76 #define HAVE_LCD_SHUTDOWN
  77
  78 /* Define this for LCD backlight available */
  79 #define HAVE_BACKLIGHT
  80 #define HAVE_BACKLIGHT_BRIGHTNESS
  81 #define MIN_BRIGHTNESS_SETTING      0
  82 #define MAX_BRIGHTNESS_SETTING      31
  83 #define DEFAULT_BRIGHTNESS_SETTING  20
  84
  85
  86 /* define this if you have a disk storage, i.e. something
  87    that needs spinups and can cause skips when shaked */
  88 #define HAVE_DISK_STORAGE
  89
  90 /* Define this if you have a software controlled poweroff */
  91 #define HAVE_SW_POWEROFF
  92
  93 /* The number of bytes reserved for loadable codecs */
  94 #define CODEC_SIZE 0x100000
  95
  96 /* The number of bytes reserved for loadable plugins */
  97 #define PLUGIN_BUFFER_SIZE 0x80000
  98
  99 /* FM Tuner
 100  * turn off for now
 101  */
 102 #define CONFIG_TUNER       TEA5767
 103 #define CONFIG_TUNER_XTAL  32768
 104
 105
 106 /* we have WM8750 codec in I2S master mode */
 107 #define HAVE_WM8750
 108
 109 /* clocking setup based on 11.2896 MHz master clock
 110  * provided to the codec by MCU
 111  * WM8750L Datasheet Table 40, page 46
 112  */
 113 #define CODEC_SRCTRL_11025HZ (0x18 << 1)
 114 #define CODEC_SRCTRL_22050HZ (0x1A << 1)
 115 #define CODEC_SRCTRL_44100HZ (0x10 << 1)
 116 #define CODEC_SRCTRL_88200HZ (0x1E << 1)
 117
 118 #define BATTERY_TYPES_COUNT 1
 119 #define BATTERY_CAPACITY_DEFAULT  850  /* this is wild guess */
 120 #define BATTERY_CAPACITY_MIN      800  /* min. capacity selectable */
 121 #define BATTERY_CAPACITY_MAX     2500  /* max. capacity selectable */
 122 #define BATTERY_CAPACITY_INC       50  /* capacity increment */
 123
 124 #define CURRENT_NORMAL     68  /* measured during playback unboosted */
 125 #define CURRENT_BACKLIGHT  24  /* measured */
 126 #define CURRENT_RECORD     40  /* additional current while recording */
 127 #define CURRENT_ATA       100  /* additional current when ata system is ON */
 128 /* #define CURRENT_REMOTE      0  additional current when remote connected */
 129
 130 #define CONFIG_CHARGING CHARGING_MONITOR
 131
 132 #ifndef SIMULATOR
 133
 134 /* Define this if your LCD can set contrast */
 135 #define HAVE_LCD_CONTRAST
 136
 137 /* Define this if you have a Motorola SCF5249 */
 138 #define CONFIG_CPU MCF5249
 139
 140 /* Define this if you want to use coldfire's i2c interface */
 141 #define CONFIG_I2C I2C_COLDFIRE
 142
 143 /* define this if the hardware can be powered off while charging */
 144 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 145
 146 /* The size of the flash ROM */
 147 #define FLASH_SIZE 0x200000
 148
 149 /* Define this to the CPU frequency */
 150 #define CPU_FREQ      11289600
 151
 152 /* Define this if you have ATA power-off control */
 153 #define HAVE_ATA_POWER_OFF
 154
 155 /* Offset ( in the firmware file's header ) to the file length */
 156 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 157
 158 /* Offset ( in the firmware file's header ) to the file CRC */
 159 #define FIRMWARE_OFFSET_FILE_CRC 0
 160
 161 /* Offset ( in the firmware file's header ) to the real data */
 162 #define FIRMWARE_OFFSET_FILE_DATA 8
 163
 164 /* Define this if you have adjustable CPU frequency */
 165 #define HAVE_ADJUSTABLE_CPU_FREQ
 166
 167 #define BOOTFILE_EXT "mpio"
 168 #define BOOTFILE "rockbox." BOOTFILE_EXT
 169 #define BOOTDIR "/.rockbox"
 170
 171 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 172 #define FLASH_ENTRYPOINT       0x00001000
 173 #define FLASH_MAGIC            0xfbfbfbf1
 174
 175 #endif /* SIMULATOR */
 176
 177 /** Port-specific settings **/
 178
 179 /* Main LCD contrast range and defaults  taken from OF*/
 180 #define MIN_CONTRAST_SETTING        24
 181 #define MAX_CONTRAST_SETTING        63
 182 #define DEFAULT_CONTRAST_SETTING    27 /* 0x1B */
 183
 184 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */