firmware/export/config/logikdax.h

   1 /*
   2  * This config file is for the Logik DAX MP3/DAB
   3  */
   4
   5 /* For Rolo and boot loader */
   6 #define MODEL_NUMBER 33
   7
   8 #define MODEL_NAME   "Logik DAX MP3/DAB"
   9
  10 /* define this if you have recording possibility */
  11 //#define HAVE_RECORDING
  12
  13 /* Define bitmask of input sources - recordable bitmask can be defined
  14    explicitly if different */
  15 //#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
  16
  17 #if 0 /* Enable for USB driver test */
  18 #define HAVE_USBSTACK
  19 #define USB_VENDOR_ID 0x13d1
  20 #define USB_PRODUCT_ID 0x1002
  21 #endif
  22
  23
  24 /* define this if you have a bitmap LCD display */
  25 #define HAVE_LCD_BITMAP
  26
  27 /* define this if you can flip your LCD */
  28 #define HAVE_LCD_FLIP
  29
  30 /* define this if you can invert the colours on your LCD */
  31 #define HAVE_LCD_INVERT
  32
  33 /* define this if you have access to the quickscreen */
  34 #define HAVE_QUICKSCREEN
  35
  36 /* define this if you would like tagcache to build on this target */
  37 #define HAVE_TAGCACHE
  38
  39 #define HAVE_FAT16SUPPORT
  40
  41 /* define this if you have a flash memory storage */
  42 #define HAVE_FLASH_STORAGE
  43
  44 #define CONFIG_STORAGE STORAGE_NAND
  45
  46 #define CONFIG_NAND NAND_TCC
  47
  48 /* LCD dimensions */
  49 #define LCD_WIDTH  128
  50 #define LCD_HEIGHT 64
  51 #define LCD_DEPTH  1
  52
  53 #define LCD_PIXELFORMAT VERTICAL_PACKING
  54
  55 /* Display colours, for screenshots and sim (0xRRGGBB) */
  56 #define LCD_DARKCOLOR       0x000000
  57 #define LCD_BRIGHTCOLOR     0x5a915a
  58 #define LCD_BL_DARKCOLOR    0x000000
  59 #define LCD_BL_BRIGHTCOLOR  0x82b4fa
  60
  61 /* define this to indicate your device's keypad */
  62 #define CONFIG_KEYPAD LOGIK_DAX_PAD
  63
  64 /* define this if you have a real-time clock */
  65 #define CONFIG_RTC RTC_TCC77X
  66
  67 /* define this if you have RTC RAM available for settings */
  68 //#define HAVE_RTC_RAM
  69
  70 /* Define this if you have a software controlled poweroff */
  71 #define HAVE_SW_POWEROFF
  72
  73 /* The number of bytes reserved for loadable codecs */
  74 #define CODEC_SIZE 0x38000
  75
  76 /* The number of bytes reserved for loadable plugins */
  77 #define PLUGIN_BUFFER_SIZE 0x10000
  78
  79 #define AB_REPEAT_ENABLE
  80
  81 /* Define this if you do software codec */
  82 #define CONFIG_CODEC SWCODEC
  83
  84 /* The DAX uses built-in WM8731 codec */
  85 #define HAVE_WM8731
  86 /* Codec is slave on serial bus */
  87 #define CODEC_SLAVE
  88 /* WM8731 has no tone controls, so we use the software ones */
  89 #define HAVE_SW_TONE_CONTROLS
  90
  91 /* Define this for LCD backlight available */
  92 #define HAVE_BACKLIGHT
  93
  94 #define CONFIG_I2C I2C_TCC77X
  95
  96 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
  97 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
  98 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
  99 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 100 #define BATTERY_TYPES_COUNT  1    /* only one type */
 101
 102 #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
 103
 104 /* define this if the unit should not shut down on low battery. */
 105 #define NO_LOW_BATTERY_SHUTDOWN
 106
 107 /* Define this if you have a TCC773L */
 108 #define CONFIG_CPU TCC773L
 109
 110 /* Define this if you have ATA power-off control */
 111 #define HAVE_ATA_POWER_OFF
 112
 113 #define HAVE_FAT16SUPPORT
 114
 115 /* Define this to the CPU frequency */
 116 #define CPU_FREQ      120000000
 117
 118 /* Offset ( in the firmware file's header ) to the file length */
 119 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 120
 121 /* Offset ( in the firmware file's header ) to the file CRC */
 122 #define FIRMWARE_OFFSET_FILE_CRC 4
 123
 124 /* Offset ( in the firmware file's header ) to the real data */
 125 #define FIRMWARE_OFFSET_FILE_DATA 6
 126
 127 /* The start address index for ROM builds */
 128 /* #define ROM_START 0x11010 for behind original Archos */
 129 #define ROM_START 0x7010 /* for behind BootBox */
 130
 131 #define CONFIG_LCD LCD_SSD1815
 132
 133 #define BOOTFILE_EXT "logik"
 134 #define BOOTFILE "rockbox." BOOTFILE_EXT
 135 #define BOOTDIR "/"
 136
 137 #define IBSS_ATTR_VOICE_STACK
 138 #define ICODE_ATTR_TREMOR_NOT_MDCT
 139 #define ICODE_ATTR_TREMOR_MDCT
 140 #define ICODE_ATTR_FLAC
 141 #define IBSS_ATTR_FLAC_DECODED0
 142 #define ICONST_ATTR_MPA_HUFFMAN
 143 #define IBSS_ATTR_MPC_SAMPLE_BUF
 144 #define ICODE_ATTR_ALAC
 145 #define IBSS_ATTR_SHORTEN_DECODED0
 146
 147 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 148
 149 /* Define this if a programmable hotkey is mapped */
 150 //#define HAVE_HOTKEY