firmware/drivers/tuner/s1a0903x01.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  * Tuner "middleware" for Samsung S1A0903X01 chip
  10  *
  11  * Copyright (C) 2003 Linus Nielsen Feltzing
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License
  15  * as published by the Free Software Foundation; either version 2
  16  * of the License, or (at your option) any later version.
  17  *
  18  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  19  * KIND, either express or implied.
  20  *
  21  ****************************************************************************/
  22
  23 #include <stdbool.h>
  24 #include <stdlib.h>
  25 #include "config.h"
  26 #include "kernel.h"
  27 #include "tuner.h" /* tuner abstraction interface */
  28 #include "fmradio.h" /* physical interface driver */
  29 #include "sound.h"
  30 #include "mas35xx.h"
  31 #include "power.h"
  32
  33 #define DEFAULT_IN1 0x100003 /* Mute */
  34 #define DEFAULT_IN2 0x140884 /* 5kHz, 7.2MHz crystal */
  35 #define PLL_FREQ_STEP 10000
  36
  37 static int fm_in1;
  38 static int fm_in2;
  39 static int fm_present = -1; /* unknown */
  40
  41 /* tuner abstraction layer: set something to the tuner */
  42 int s1a0903x01_set(int setting, int value)
  43 {
  44     int val = 1;
  45
  46     switch(setting)
  47     {
  48         case RADIO_SLEEP:
  49             if (!value)
  50             {   /* wakeup: just unit */
  51                 fm_in1 = DEFAULT_IN1;
  52                 fm_in2 = DEFAULT_IN2;
  53                 fmradio_set(1, fm_in1);
  54                 fmradio_set(2, fm_in2);
  55             }
  56             /* else we have no sleep mode? */
  57             break;
  58
  59         case RADIO_FREQUENCY:
  60         {
  61             int pll_cnt;
  62 #if CONFIG_CODEC == MAS3587F
  63             /* Shift the MAS internal clock away for certain frequencies to
  64              * avoid interference. */
  65             int pitch = 1000;
  66
  67             /* 4th harmonic falls in the FM frequency range */
  68             int if_freq = 4 * mas_get_pllfreq();
  69
  70             /* shift the mas harmonic >= 300 kHz away using the direction
  71              * which needs less shifting. */
  72             if (value < if_freq)
  73             {
  74                 if (if_freq - value < 300000)
  75                     pitch = 1003 - (if_freq - value) / 100000;
  76             }
  77             else
  78             {
  79                 if (value - if_freq < 300000)
  80                     pitch = 997 + (value - if_freq) / 100000;
  81             }
  82             sound_set_pitch(pitch);
  83 #endif
  84             /* We add the standard Intermediate Frequency 10.7MHz
  85             ** before calculating the divisor
  86             ** The reference frequency is set to 50kHz, and the VCO
  87             ** output is prescaled by 2.
  88             */
  89
  90             pll_cnt = (value + 10700000) / (PLL_FREQ_STEP/2) / 2;
  91
  92             /* 0x100000 == FM mode
  93             ** 0x000002 == Microprocessor controlled Mute
  94             */
  95             fm_in1 = (fm_in1 & 0xfff00007) | (pll_cnt << 3);
  96             fmradio_set(1, fm_in1);
  97             break;
  98         }
  99
 100         case RADIO_SCAN_FREQUENCY:
 101             /* Tune in and delay */
 102             s1a0903x01_set(RADIO_FREQUENCY, value);
 103             sleep(1);
 104             /* Start IF measurement */
 105             fm_in1 |= 4;
 106             fmradio_set(1, fm_in1);
 107             sleep(1);
 108             val = s1a0903x01_get(RADIO_TUNED);
 109             break;
 110
 111         case RADIO_MUTE:
 112             fm_in1 = (fm_in1 & 0xfffffffe) | (value?1:0);
 113             fmradio_set(1, fm_in1);
 114             break;
 115
 116         case RADIO_FORCE_MONO:
 117             fm_in2 = (fm_in2 & 0xfffffffb) | (value?0:4);
 118             fmradio_set(2, fm_in2);
 119             break;
 120         /* NOTE: These were only zeroed when starting the tuner from OFF
 121                  but the default values already set them to 0. */
 122 #if 0
 123         case S1A0903X01_IF_MEASUREMENT:
 124             fm_in1 = (fm_in1 & 0xfffffffb) | (value?4:0);
 125             fmradio_set(1, fm_in1);
 126             break;
 127
 128         case S1A0903X01_SENSITIVITY:
 129             fm_in2 = (fm_in2 & 0xffff9fff) | ((value & 3) << 13);
 130             fmradio_set(2, fm_in2);
 131             break;
 132 #endif
 133         default:
 134             val = -1;
 135     }
 136
 137     return val;
 138 }
 139
 140 /* tuner abstraction layer: read something from the tuner */
 141 int s1a0903x01_get(int setting)
 142 {
 143     int val = -1;
 144     switch(setting)
 145     {
 146         case RADIO_PRESENT:
 147             if (fm_present == -1)
 148             {
 149 #ifdef HAVE_TUNER_PWR_CTRL
 150                 bool fmstatus = tuner_power(true);
 151 #endif
 152                 /* 5kHz, 7.2MHz crystal, test mode 1 */
 153                 fmradio_set(2, 0x140885);
 154                 fm_present = (fmradio_read(0) == 0x140885);
 155 #ifdef HAVE_TUNER_PWR_CTRL
 156                 if (!fmstatus)
 157                     tuner_power(false);
 158 #endif
 159             }
 160
 161             val = fm_present;
 162             break;
 163
 164         case RADIO_TUNED:
 165             val = fmradio_read(3);
 166             val = abs(10700 - ((val & 0x7ffff) / 8)) < 50; /* convert to kHz */
 167             break;
 168
 169         case RADIO_STEREO:
 170             val = fmradio_read(3);
 171             val = ((val & 0x100000) ? true : false);
 172             break;
 173     }
 174     return val;
 175 }