rbutil/rbutilqt/rbutilqt.pro

   1 #
   2 #             __________               __   ___.
   3 #   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4 #   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5 #   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6 #   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7 #                     \/            \/     \/    \/            \/
   8 #
   9 # All files in this archive are subject to the GNU General Public License.
  10 # See the file COPYING in the source tree root for full license agreement.
  11 #
  12 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  13 # KIND, either express or implied.
  14 #
  15
  16 # ccache
  17 unix:!mac:!noccache {
  18     CCACHE = $$system(which ccache)
  19     !isEmpty(CCACHE) {
  20         message("using ccache")
  21         QMAKE_CXX = ccache $$QMAKE_CXX
  22         QMAKE_CC = ccache $$QMAKE_CC
  23     }
  24 }
  25
  26 MYBUILDDIR = $$OUT_PWD/build/
  27 MYLIBBUILDDIR = $$MYBUILDDIR/libs/
  28 OBJECTS_DIR = $$MYBUILDDIR/o
  29 UI_DIR = $$MYBUILDDIR/ui
  30 MOC_DIR = $$MYBUILDDIR/moc
  31 RCC_DIR = $$MYBUILDDIR/rcc
  32
  33 !silent {
  34     ADDENV = "V=1"
  35 } else {
  36     ADDENV = "@"
  37 }
  38
  39 # check version of Qt installation
  40 !contains(QT_MAJOR_VERSION, 5) {
  41     VER = $$find(QT_VERSION, ^4\\.[5-9]+.*)
  42     isEmpty(VER) {
  43         message("Qt >= 4.5 required!")
  44         !isEmpty(QT_VERSION) error("Qt found:" $$[QT_VERSION])
  45     }
  46 message("Qt version used:" $$VER)
  47 }
  48
  49 MACHINEFLAGS = $$find(QMAKE_CFLAGS, -m[63][42])
  50
  51 RBBASE_DIR = $$_PRO_FILE_PWD_
  52 RBBASE_DIR = $$replace(RBBASE_DIR,/rbutil/rbutilqt,)
  53
  54 message("Rockbox Base dir: "$$RBBASE_DIR)
  55
  56 # check for system speex. Add a custom rule for pre-building librbspeex if not
  57 # found. Newer versions of speex are split up into libspeex and libspeexdsp,
  58 # and some distributions package them separately. Check for both and fall back
  59 # to librbspeex if not found.
  60 # NOTE: keep adding the linker option after -lrbspeex, otherwise linker errors
  61 # occur if the linker defaults to --as-needed
  62 # (see http://www.gentoo.org/proj/en/qa/asneeded.xml)
  63 #
  64 # Always use our own copy when building statically. Don't search for libspeex
  65 # on Mac, since we don't deploy statically there.
  66 !static:unix:!mac {
  67     LIBSPEEX = $$system(pkg-config --silence-errors --libs speex speexdsp)
  68 }
  69 # The external Makefiles use ar to create libs. To allow cross-compiling pass
  70 # the ar that matches the current gcc. Since qmake doesn't provide a variable
  71 # holding the correct ar without any additions we need to figure it ourselves
  72 # here. This assumes that QMAKE_CC will always be "gcc", maybe with a postfix.
  73 MYAR = $$replace(QMAKE_CC,gcc.*,ar)
  74
  75 librbspeex.commands = $$ADDENV \
  76         BUILD_DIR=$$MYLIBBUILDDIR/rbspeex/ \
  77         TARGET_DIR=$$MYLIBBUILDDIR \
  78         SYS_SPEEX=\"$$LIBSPEEX\" \
  79         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
  80         $(MAKE) -C $$RBBASE_DIR/tools/rbspeex librbspeex.a
  81 libucl.commands = $$ADDENV \
  82         BUILD_DIR=$$MYLIBBUILDDIR/ucl/ \
  83         TARGET_DIR=$$MYLIBBUILDDIR \
  84         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
  85         $(MAKE) -C $$RBBASE_DIR/tools/ucl/src libucl.a
  86 libipodpatcher.commands = $$ADDENV \
  87         BUILD_DIR=$$MYLIBBUILDDIR/ipodpatcher/ \
  88         TARGET_DIR=$$MYLIBBUILDDIR \
  89         APPVERSION=\"rbutil\" \
  90         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
  91         $(MAKE) -C $$RBBASE_DIR/rbutil/ipodpatcher libipodpatcher.a
  92 libsansapatcher.commands = $$ADDENV \
  93         BUILD_DIR=$$MYLIBBUILDDIR/sansapatcher/ \
  94         TARGET_DIR=$$MYLIBBUILDDIR \
  95         APPVERSION=\"rbutil\" \
  96         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
  97         $(MAKE) -C $$RBBASE_DIR/rbutil/sansapatcher libsansapatcher.a
  98 libmkamsboot.commands = $$ADDENV \
  99         BUILD_DIR=$$MYLIBBUILDDIR/mkamsboot/ \
 100         TARGET_DIR=$$MYLIBBUILDDIR \
 101         APPVERSION=\"rbutil\" \
 102         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
 103         $(MAKE) -C $$RBBASE_DIR/rbutil/mkamsboot libmkamsboot.a
 104 libmktccboot.commands = $$ADDENV \
 105         BUILD_DIR=$$MYLIBBUILDDIR/mktccboot/ \
 106         TARGET_DIR=$$MYLIBBUILDDIR \
 107         APPVERSION=\"rbutil\" \
 108         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
 109         $(MAKE) -C $$RBBASE_DIR/rbutil/mktccboot libmktccboot.a
 110 libmkmpioboot.commands = $$ADDENV \
 111         BUILD_DIR=$$MYLIBBUILDDIR/mkmpioboot/ \
 112         TARGET_DIR=$$MYLIBBUILDDIR \
 113         APPVERSION=\"rbutil\" \
 114         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
 115         $(MAKE) -C $$RBBASE_DIR/rbutil/mkmpioboot libmkmpioboot.a
 116 libchinachippatcher.commands = $$ADDENV \
 117         BUILD_DIR=$$MYLIBBUILDDIR/chinachippatcher/ \
 118         TARGET_DIR=$$MYLIBBUILDDIR \
 119         APPVERSION=\"rbutil\" \
 120         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
 121         $(MAKE) -C $$RBBASE_DIR/rbutil/chinachippatcher libchinachippatcher.a
 122 libmkimxboot.commands = $$ADDENV \
 123         BUILD_DIR=$$MYLIBBUILDDIR/mkimxboot/ \
 124         TARGET_DIR=$$MYLIBBUILDDIR \
 125         APPVERSION=\"rbutil\" \
 126         CC=\"$$QMAKE_CC\" CFLAGS=\"$$MACHINEFLAGS\" AR=\"$$MYAR\" \
 127         $(MAKE) -C $$RBBASE_DIR/rbutil/mkimxboot libmkimxboot.a
 128 # Note: order is important for RBLIBS! The libs are appended to the linker
 129 # flags in this order, put libucl at the end.
 130 RBLIBS = librbspeex libipodpatcher libsansapatcher libmkamsboot libmktccboot \
 131          libmkmpioboot libchinachippatcher libmkimxboot libucl
 132 QMAKE_EXTRA_TARGETS += $$RBLIBS
 133 PRE_TARGETDEPS += $$RBLIBS
 134
 135 # rule for creating ctags file
 136 tags.commands = ctags -R --c++-kinds=+p --fields=+iaS --extra=+q $(SOURCES)
 137 tags.depends = $(SOURCES)
 138 QMAKE_EXTRA_TARGETS += tags
 139
 140 # add a custom rule for making the translations
 141 lrelease.commands = $$[QT_INSTALL_BINS]/lrelease -silent $$_PRO_FILE_
 142 QMAKE_EXTRA_TARGETS += lrelease
 143 !dbg {
 144     PRE_TARGETDEPS += lrelease
 145 }
 146
 147 # Needed by QT on Win
 148 INCLUDEPATH = $$_PRO_FILE_PWD_ $$_PRO_FILE_PWD_/irivertools \
 149             $$_PRO_FILE_PWD_/zlib $$_PRO_FILE_PWD_/base \
 150             $$_PRO_FILE_PWD_/zlib $$_PRO_FILE_PWD_/gui
 151 INCLUDEPATH += $$RBBASE_DIR/rbutil/ipodpatcher $$RBBASE_DIR/rbutil/sansapatcher \
 152             $$RBBASE_DIR/tools/rbspeex $$RBBASE_DIR/tools
 153
 154 DEPENDPATH = $$INCLUDEPATH
 155
 156 LIBS += -L$$OUT_PWD -L$$MYLIBBUILDDIR
 157 # append all RBLIBS to LIBS
 158 for(rblib, RBLIBS) {
 159     LIBS += -l$$replace(rblib, lib,)
 160 }
 161
 162 # on win32 libz is linked implicitly.
 163 !win32 {
 164     LIBS += -lz
 165 }
 166
 167 # Add a (possibly found) libspeex now, don't do this before -lrbspeex!
 168 !static:!isEmpty(LIBSPEEX) {
 169     LIBS += $$LIBSPEEX
 170 }
 171
 172 TEMPLATE = app
 173 TARGET = RockboxUtility
 174 QT += network
 175
 176 contains(QT_MAJOR_VERSION, 5) {
 177     message("Qt5 found")
 178     QT += widgets
 179 }
 180
 181 dbg {
 182     CONFIG += debug thread qt warn_on
 183     DEFINES -= QT_NO_DEBUG_OUTPUT
 184     DEFINES += DBG
 185     message("debug")
 186 }
 187 !dbg {
 188     CONFIG += release thread qt
 189     DEFINES -= QT_NO_DEBUG_OUTPUT
 190     DEFINES += NODEBUG
 191     message("release")
 192 }
 193
 194 DEFINES += RBUTIL _LARGEFILE64_SOURCE
 195
 196 # platform specific
 197 win32 {
 198     # use MinGW's implementation of stdio functions for extended format string
 199     # support.
 200     DEFINES += __USE_MINGW_ANSI_STDIO=1
 201     DEFINES += _CRT_SECURE_NO_WARNINGS
 202     DEFINES += UNICODE
 203     LIBS += -lsetupapi -lnetapi32
 204 }
 205 win32:static {
 206     QMAKE_LFLAGS += -static-libgcc -static-libstdc++
 207 }
 208 unix:!static:!libusb0:!macx {
 209     DEFINES += LIBUSB1
 210     LIBS += -lusb-1.0
 211 }
 212 unix:!static:libusb0:!macx {
 213     LIBS += -lusb
 214 }
 215
 216 unix:!macx:static {
 217     # force statically linking of libusb. Libraries that are appended
 218     # later will get linked dynamically again.
 219     LIBS += -Wl,-Bstatic -lusb -Wl,-Bdynamic
 220 }
 221
 222 # if -config intel is specified use 10.5 SDK and don't build for PPC
 223 macx:!intel {
 224     CONFIG += ppc
 225     QMAKE_LFLAGS_PPC=-mmacosx-version-min=10.4 -arch ppc
 226     QMAKE_LFLAGS_X86=-mmacosx-version-min=10.4 -arch i386
 227     QMAKE_MAC_SDK=/Developer/SDKs/MacOSX10.4u.sdk
 228 }
 229 macx:intel {
 230     QMAKE_LFLAGS_X86=-mmacosx-version-min=10.5 -arch i386
 231     QMAKE_MAC_SDK=/Developer/SDKs/MacOSX10.5.sdk
 232     QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.5
 233 }
 234 macx {
 235     CONFIG += x86
 236     LIBS += -L/usr/local/lib \
 237             -framework IOKit -framework CoreFoundation -framework Carbon \
 238             -framework SystemConfiguration -framework CoreServices
 239     INCLUDEPATH += /usr/local/include
 240
 241     # rule for creating a dmg file
 242     dmg.commands = hdiutil create -ov -srcfolder rbutilqt.app/ rbutil.dmg
 243     QMAKE_EXTRA_TARGETS += dmg
 244 }
 245
 246 static {
 247     QTPLUGIN += qtaccessiblewidgets
 248     LIBS += -L$$(QT_BUILD_TREE)/plugins/accessible -lqtaccessiblewidgets
 249     LIBS += -L.
 250     DEFINES += STATIC
 251     message("using static plugin")
 252 }
 253
 254 unix {
 255     target.path = /usr/local/bin
 256     INSTALLS += target
 257 }
 258
 259 # source files are separate.
 260 include(rbutilqt.pri)
 261