source/libs/luajit/LuaJIT-src/src/lj_target_mips.h

   1 /*
   2 ** Definitions for MIPS CPUs.
   3 ** Copyright (C) 2005-2015 Mike Pall. See Copyright Notice in luajit.h
   4 */
   5
   6 #ifndef _LJ_TARGET_MIPS_H
   7 #define _LJ_TARGET_MIPS_H
   8
   9 /* -- Registers IDs ------------------------------------------------------- */
  10
  11 #define GPRDEF(_) \
  12   _(R0) _(R1) _(R2) _(R3) _(R4) _(R5) _(R6) _(R7) \
  13   _(R8) _(R9) _(R10) _(R11) _(R12) _(R13) _(R14) _(R15) \
  14   _(R16) _(R17) _(R18) _(R19) _(R20) _(R21) _(R22) _(R23) \
  15   _(R24) _(R25) _(SYS1) _(SYS2) _(R28) _(SP) _(R30) _(RA)
  16 #define FPRDEF(_) \
  17   _(F0) _(F1) _(F2) _(F3) _(F4) _(F5) _(F6) _(F7) \
  18   _(F8) _(F9) _(F10) _(F11) _(F12) _(F13) _(F14) _(F15) \
  19   _(F16) _(F17) _(F18) _(F19) _(F20) _(F21) _(F22) _(F23) \
  20   _(F24) _(F25) _(F26) _(F27) _(F28) _(F29) _(F30) _(F31)
  21 #define VRIDDEF(_)
  22
  23 #define RIDENUM(name)   RID_##name,
  24
  25 enum {
  26   GPRDEF(RIDENUM)               /* General-purpose registers (GPRs). */
  27   FPRDEF(RIDENUM)               /* Floating-point registers (FPRs). */
  28   RID_MAX,
  29   RID_ZERO = RID_R0,
  30   RID_TMP = RID_RA,
  31
  32   /* Calling conventions. */
  33   RID_RET = RID_R2,
  34 #if LJ_LE
  35   RID_RETHI = RID_R3,
  36   RID_RETLO = RID_R2,
  37 #else
  38   RID_RETHI = RID_R2,
  39   RID_RETLO = RID_R3,
  40 #endif
  41   RID_FPRET = RID_F0,
  42   RID_CFUNCADDR = RID_R25,
  43
  44   /* These definitions must match with the *.dasc file(s): */
  45   RID_BASE = RID_R16,           /* Interpreter BASE. */
  46   RID_LPC = RID_R18,            /* Interpreter PC. */
  47   RID_DISPATCH = RID_R19,       /* Interpreter DISPATCH table. */
  48   RID_LREG = RID_R20,           /* Interpreter L. */
  49   RID_JGL = RID_R30,            /* On-trace: global_State + 32768. */
  50
  51   /* Register ranges [min, max) and number of registers. */
  52   RID_MIN_GPR = RID_R0,
  53   RID_MAX_GPR = RID_RA+1,
  54   RID_MIN_FPR = RID_F0,
  55   RID_MAX_FPR = RID_F31+1,
  56   RID_NUM_GPR = RID_MAX_GPR - RID_MIN_GPR,
  57   RID_NUM_FPR = RID_MAX_FPR - RID_MIN_FPR       /* Only even regs are used. */
  58 };
  59
  60 #define RID_NUM_KREF            RID_NUM_GPR
  61 #define RID_MIN_KREF            RID_R0
  62
  63 /* -- Register sets ------------------------------------------------------- */
  64
  65 /* Make use of all registers, except ZERO, TMP, SP, SYS1, SYS2 and JGL. */
  66 #define RSET_FIXED \
  67   (RID2RSET(RID_ZERO)|RID2RSET(RID_TMP)|RID2RSET(RID_SP)|\
  68    RID2RSET(RID_SYS1)|RID2RSET(RID_SYS2)|RID2RSET(RID_JGL))
  69 #define RSET_GPR        (RSET_RANGE(RID_MIN_GPR, RID_MAX_GPR) - RSET_FIXED)
  70 #define RSET_FPR \
  71   (RID2RSET(RID_F0)|RID2RSET(RID_F2)|RID2RSET(RID_F4)|RID2RSET(RID_F6)|\
  72    RID2RSET(RID_F8)|RID2RSET(RID_F10)|RID2RSET(RID_F12)|RID2RSET(RID_F14)|\
  73    RID2RSET(RID_F16)|RID2RSET(RID_F18)|RID2RSET(RID_F20)|RID2RSET(RID_F22)|\
  74    RID2RSET(RID_F24)|RID2RSET(RID_F26)|RID2RSET(RID_F28)|RID2RSET(RID_F30))
  75 #define RSET_ALL        (RSET_GPR|RSET_FPR)
  76 #define RSET_INIT       RSET_ALL
  77
  78 #define RSET_SCRATCH_GPR \
  79   (RSET_RANGE(RID_R1, RID_R15+1)|\
  80    RID2RSET(RID_R24)|RID2RSET(RID_R25)|RID2RSET(RID_R28))
  81 #define RSET_SCRATCH_FPR \
  82   (RID2RSET(RID_F0)|RID2RSET(RID_F2)|RID2RSET(RID_F4)|RID2RSET(RID_F6)|\
  83    RID2RSET(RID_F8)|RID2RSET(RID_F10)|RID2RSET(RID_F12)|RID2RSET(RID_F14)|\
  84    RID2RSET(RID_F16)|RID2RSET(RID_F18))
  85 #define RSET_SCRATCH            (RSET_SCRATCH_GPR|RSET_SCRATCH_FPR)
  86 #define REGARG_FIRSTGPR         RID_R4
  87 #define REGARG_LASTGPR          RID_R7
  88 #define REGARG_NUMGPR           4
  89 #define REGARG_FIRSTFPR         RID_F12
  90 #define REGARG_LASTFPR          RID_F14
  91 #define REGARG_NUMFPR           2
  92
  93 /* -- Spill slots --------------------------------------------------------- */
  94
  95 /* Spill slots are 32 bit wide. An even/odd pair is used for FPRs.
  96 **
  97 ** SPS_FIXED: Available fixed spill slots in interpreter frame.
  98 ** This definition must match with the *.dasc file(s).
  99 **
 100 ** SPS_FIRST: First spill slot for general use.
 101 */
 102 #define SPS_FIXED       5
 103 #define SPS_FIRST       4
 104
 105 #define SPOFS_TMP       0
 106
 107 #define sps_scale(slot)         (4 * (int32_t)(slot))
 108 #define sps_align(slot)         (((slot) - SPS_FIXED + 1) & ~1)
 109
 110 /* -- Exit state ---------------------------------------------------------- */
 111
 112 /* This definition must match with the *.dasc file(s). */
 113 typedef struct {
 114   lua_Number fpr[RID_NUM_FPR];  /* Floating-point registers. */
 115   int32_t gpr[RID_NUM_GPR];     /* General-purpose registers. */
 116   int32_t spill[256];           /* Spill slots. */
 117 } ExitState;
 118
 119 /* Highest exit + 1 indicates stack check. */
 120 #define EXITSTATE_CHECKEXIT     1
 121
 122 /* Return the address of a per-trace exit stub. */
 123 static LJ_AINLINE uint32_t *exitstub_trace_addr_(uint32_t *p)
 124 {
 125   while (*p == 0x00000000) p++;  /* Skip MIPSI_NOP. */
 126   return p;
 127 }
 128 /* Avoid dependence on lj_jit.h if only including lj_target.h. */
 129 #define exitstub_trace_addr(T, exitno) \
 130   exitstub_trace_addr_((MCode *)((char *)(T)->mcode + (T)->szmcode))
 131
 132 /* -- Instructions -------------------------------------------------------- */
 133
 134 /* Instruction fields. */
 135 #define MIPSF_S(r)      ((r) << 21)
 136 #define MIPSF_T(r)      ((r) << 16)
 137 #define MIPSF_D(r)      ((r) << 11)
 138 #define MIPSF_R(r)      ((r) << 21)
 139 #define MIPSF_H(r)      ((r) << 16)
 140 #define MIPSF_G(r)      ((r) << 11)
 141 #define MIPSF_F(r)      ((r) << 6)
 142 #define MIPSF_A(n)      ((n) << 6)
 143 #define MIPSF_M(n)      ((n) << 11)
 144
 145 typedef enum MIPSIns {
 146   /* Integer instructions. */
 147   MIPSI_MOVE = 0x00000021,
 148   MIPSI_NOP = 0x00000000,
 149
 150   MIPSI_LI = 0x24000000,
 151   MIPSI_LU = 0x34000000,
 152   MIPSI_LUI = 0x3c000000,
 153
 154   MIPSI_ADDIU = 0x24000000,
 155   MIPSI_ANDI = 0x30000000,
 156   MIPSI_ORI = 0x34000000,
 157   MIPSI_XORI = 0x38000000,
 158   MIPSI_SLTI = 0x28000000,
 159   MIPSI_SLTIU = 0x2c000000,
 160
 161   MIPSI_ADDU = 0x00000021,
 162   MIPSI_SUBU = 0x00000023,
 163   MIPSI_MUL = 0x70000002,
 164   MIPSI_AND = 0x00000024,
 165   MIPSI_OR = 0x00000025,
 166   MIPSI_XOR = 0x00000026,
 167   MIPSI_NOR = 0x00000027,
 168   MIPSI_SLT = 0x0000002a,
 169   MIPSI_SLTU = 0x0000002b,
 170   MIPSI_MOVZ = 0x0000000a,
 171   MIPSI_MOVN = 0x0000000b,
 172   MIPSI_MFHI = 0x00000010,
 173   MIPSI_MFLO = 0x00000012,
 174   MIPSI_MULT = 0x00000018,
 175
 176   MIPSI_SLL = 0x00000000,
 177   MIPSI_SRL = 0x00000002,
 178   MIPSI_SRA = 0x00000003,
 179   MIPSI_ROTR = 0x00200002,      /* MIPS32R2 */
 180   MIPSI_SLLV = 0x00000004,
 181   MIPSI_SRLV = 0x00000006,
 182   MIPSI_SRAV = 0x00000007,
 183   MIPSI_ROTRV = 0x00000046,     /* MIPS32R2 */
 184
 185   MIPSI_SEB = 0x7c000420,       /* MIPS32R2 */
 186   MIPSI_SEH = 0x7c000620,       /* MIPS32R2 */
 187   MIPSI_WSBH = 0x7c0000a0,      /* MIPS32R2 */
 188
 189   MIPSI_B = 0x10000000,
 190   MIPSI_J = 0x08000000,
 191   MIPSI_JAL = 0x0c000000,
 192   MIPSI_JR = 0x00000008,
 193   MIPSI_JALR = 0x0000f809,
 194
 195   MIPSI_BEQ = 0x10000000,
 196   MIPSI_BNE = 0x14000000,
 197   MIPSI_BLEZ = 0x18000000,
 198   MIPSI_BGTZ = 0x1c000000,
 199   MIPSI_BLTZ = 0x04000000,
 200   MIPSI_BGEZ = 0x04010000,
 201
 202   /* Load/store instructions. */
 203   MIPSI_LW = 0x8c000000,
 204   MIPSI_SW = 0xac000000,
 205   MIPSI_LB = 0x80000000,
 206   MIPSI_SB = 0xa0000000,
 207   MIPSI_LH = 0x84000000,
 208   MIPSI_SH = 0xa4000000,
 209   MIPSI_LBU = 0x90000000,
 210   MIPSI_LHU = 0x94000000,
 211   MIPSI_LWC1 = 0xc4000000,
 212   MIPSI_SWC1 = 0xe4000000,
 213   MIPSI_LDC1 = 0xd4000000,
 214   MIPSI_SDC1 = 0xf4000000,
 215
 216   /* FP instructions. */
 217   MIPSI_MOV_S = 0x46000006,
 218   MIPSI_MOV_D = 0x46200006,
 219   MIPSI_MOVT_D = 0x46210011,
 220   MIPSI_MOVF_D = 0x46200011,
 221
 222   MIPSI_ABS_D = 0x46200005,
 223   MIPSI_NEG_D = 0x46200007,
 224
 225   MIPSI_ADD_D = 0x46200000,
 226   MIPSI_SUB_D = 0x46200001,
 227   MIPSI_MUL_D = 0x46200002,
 228   MIPSI_DIV_D = 0x46200003,
 229   MIPSI_SQRT_D = 0x46200004,
 230
 231   MIPSI_ADD_S = 0x46000000,
 232   MIPSI_SUB_S = 0x46000001,
 233
 234   MIPSI_CVT_D_S = 0x46000021,
 235   MIPSI_CVT_W_S = 0x46000024,
 236   MIPSI_CVT_S_D = 0x46200020,
 237   MIPSI_CVT_W_D = 0x46200024,
 238   MIPSI_CVT_S_W = 0x46800020,
 239   MIPSI_CVT_D_W = 0x46800021,
 240
 241   MIPSI_TRUNC_W_S = 0x4600000d,
 242   MIPSI_TRUNC_W_D = 0x4620000d,
 243   MIPSI_FLOOR_W_S = 0x4600000f,
 244   MIPSI_FLOOR_W_D = 0x4620000f,
 245
 246   MIPSI_MFC1 = 0x44000000,
 247   MIPSI_MTC1 = 0x44800000,
 248
 249   MIPSI_BC1F = 0x45000000,
 250   MIPSI_BC1T = 0x45010000,
 251
 252   MIPSI_C_EQ_D = 0x46200032,
 253   MIPSI_C_OLT_D = 0x46200034,
 254   MIPSI_C_ULT_D = 0x46200035,
 255   MIPSI_C_OLE_D = 0x46200036,
 256   MIPSI_C_ULE_D = 0x46200037,
 257
 258 } MIPSIns;
 259
 260 #endif