?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux...
[linux.git] / drivers / fpga / altera-cvp.c
blob6b09144324453045386171e76b8904c6818931f3
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP
4 *
5 * Copyright (C) 2017 DENX Software Engineering
6 *
7 * Anatolij Gustschin <agust@denx.de>
8 *
9 * Manage Altera FPGA firmware using PCIe CvP.
10 * Firmware must be in binary "rbf" format.
11 */
12
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/fpga/fpga-mgr.h>
16 #include <linux/module.h>
17 #include <linux/pci.h>
18 #include <linux/sizes.h>
19
20 #define CVP_BAR 0 /* BAR used for data transfer in memory mode */
21 #define CVP_DUMMY_WR 244 /* dummy writes to clear CvP state machine */
22 #define TIMEOUT_US 2000 /* CVP STATUS timeout for USERMODE polling */
23
24 /* Vendor Specific Extended Capability Registers */
25 #define VSE_PCIE_EXT_CAP_ID 0x0
26 #define VSE_PCIE_EXT_CAP_ID_VAL 0x000b /* 16bit */
27
28 #define VSE_CVP_STATUS 0x1c /* 32bit */
29 #define VSE_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */
30 #define VSE_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */
31 #define VSE_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */
32 #define VSE_CVP_STATUS_USERMODE BIT(21) /* USERMODE */
33 #define VSE_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */
34 #define VSE_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */
35
36 #define VSE_CVP_MODE_CTRL 0x20 /* 32bit */
37 #define VSE_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */
38 #define VSE_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */
39 #define VSE_CVP_MODE_CTRL_NUMCLKS_OFF 8 /* NUMCLKS bits offset */
40 #define VSE_CVP_MODE_CTRL_NUMCLKS_MASK GENMASK(15, 8)
41
42 #define VSE_CVP_DATA 0x28 /* 32bit */
43 #define VSE_CVP_PROG_CTRL 0x2c /* 32bit */
44 #define VSE_CVP_PROG_CTRL_CONFIG BIT(0)
45 #define VSE_CVP_PROG_CTRL_START_XFER BIT(1)
46 #define VSE_CVP_PROG_CTRL_MASK GENMASK(1, 0)
47
48 #define VSE_UNCOR_ERR_STATUS 0x34 /* 32bit */
49 #define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */
50
51 #define V1_VSEC_OFFSET 0x200 /* Vendor Specific Offset V1 */
52 /* V2 Defines */
53 #define VSE_CVP_TX_CREDITS 0x49 /* 8bit */
54
55 #define V2_CREDIT_TIMEOUT_US 20000
56 #define V2_CHECK_CREDIT_US 10
57 #define V2_POLL_TIMEOUT_US 1000000
58 #define V2_USER_TIMEOUT_US 500000
59
60 #define V1_POLL_TIMEOUT_US 10
61
62 #define DRV_NAME "altera-cvp"
63 #define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager"
64
65 /* Write block sizes */
66 #define ALTERA_CVP_V1_SIZE 4
67 #define ALTERA_CVP_V2_SIZE 4096
68
69 /* Optional CvP config error status check for debugging */
70 static bool altera_cvp_chkcfg;
71
72 struct cvp_priv;
73
74 struct altera_cvp_conf {
75 struct pci_dev *pci_dev;
76 void __iomem *map;
77 void (*write_data)(struct altera_cvp_conf *conf,
78 u32 data);
79 char mgr_name[64];
80 u8 numclks;
81 u32 sent_packets;
82 u32 vsec_offset;
83 const struct cvp_priv *priv;
84 };
85
86 struct cvp_priv {
87 void (*switch_clk)(struct altera_cvp_conf *conf);
88 int (*clear_state)(struct altera_cvp_conf *conf);
89 int (*wait_credit)(struct fpga_manager *mgr, u32 blocks);
90 size_t block_size;
91 int poll_time_us;
92 int user_time_us;
93 };
94
95 static int altera_read_config_byte(struct altera_cvp_conf *conf,
96 int where, u8 *val)
97 {
98 return pci_read_config_byte(conf->pci_dev, conf->vsec_offset + where,
99 val);
100 }
101
102 static int altera_read_config_dword(struct altera_cvp_conf *conf,
103 int where, u32 *val)
104 {
105 return pci_read_config_dword(conf->pci_dev, conf->vsec_offset + where,
106 val);
107 }
108
109 static int altera_write_config_dword(struct altera_cvp_conf *conf,
110 int where, u32 val)
111 {
112 return pci_write_config_dword(conf->pci_dev, conf->vsec_offset + where,
113 val);
114 }
115
116 static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
117 {
118 struct altera_cvp_conf *conf = mgr->priv;
119 u32 status;
120
121 altera_read_config_dword(conf, VSE_CVP_STATUS, &status);
122
123 if (status & VSE_CVP_STATUS_CFG_DONE)
124 return FPGA_MGR_STATE_OPERATING;
125
126 if (status & VSE_CVP_STATUS_CVP_EN)
127 return FPGA_MGR_STATE_POWER_UP;
128
129 return FPGA_MGR_STATE_UNKNOWN;
130 }
131
132 static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
133 {
134 writel(val, conf->map);
135 }
136
137 static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
138 {
139 pci_write_config_dword(conf->pci_dev, conf->vsec_offset + VSE_CVP_DATA,
140 val);
141 }
142
143 /* switches between CvP clock and internal clock */
144 static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
145 {
146 unsigned int i;
147 u32 val;
148
149 /* set 1 CVP clock cycle for every CVP Data Register Write */
150 altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
151 val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
152 val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
153 altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
154
155 for (i = 0; i < CVP_DUMMY_WR; i++)
156 conf->write_data(conf, 0); /* dummy data, could be any value */
157 }
158
159 static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
160 u32 status_val, int timeout_us)
161 {
162 unsigned int retries;
163 u32 val;
164
165 retries = timeout_us / 10;
166 if (timeout_us % 10)
167 retries++;
168
169 do {
170 altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
171 if ((val & status_mask) == status_val)
172 return 0;
173
174 /* use small usleep value to re-check and break early */
175 usleep_range(10, 11);
176 } while (--retries);
177
178 return -ETIMEDOUT;
179 }
180
181 static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
182 {
183 struct altera_cvp_conf *conf = mgr->priv;
184 u32 val;
185 int ret;
186
187 /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
188 ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
189 if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) {
190 dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
191 bytes);
192 return -EPROTO;
193 }
194 return 0;
195 }
196
197 /*
198 * CvP Version2 Functions
199 * Recent Intel FPGAs use a credit mechanism to throttle incoming
200 * bitstreams and a different method of clearing the state.
201 */
202
203 static int altera_cvp_v2_clear_state(struct altera_cvp_conf *conf)
204 {
205 u32 val;
206 int ret;
207
208 /* Clear the START_XFER and CVP_CONFIG bits */
209 ret = altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
210 if (ret) {
211 dev_err(&conf->pci_dev->dev,
212 "Error reading CVP Program Control Register\n");
213 return ret;
214 }
215
216 val &= ~VSE_CVP_PROG_CTRL_MASK;
217 ret = altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
218 if (ret) {
219 dev_err(&conf->pci_dev->dev,
220 "Error writing CVP Program Control Register\n");
221 return ret;
222 }
223
224 return altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
225 conf->priv->poll_time_us);
226 }
227
228 static int altera_cvp_v2_wait_for_credit(struct fpga_manager *mgr,
229 u32 blocks)
230 {
231 u32 timeout = V2_CREDIT_TIMEOUT_US / V2_CHECK_CREDIT_US;
232 struct altera_cvp_conf *conf = mgr->priv;
233 int ret;
234 u8 val;
235
236 do {
237 ret = altera_read_config_byte(conf, VSE_CVP_TX_CREDITS, &val);
238 if (ret) {
239 dev_err(&conf->pci_dev->dev,
240 "Error reading CVP Credit Register\n");
241 return ret;
242 }
243
244 /* Return if there is space in FIFO */
245 if (val - (u8)conf->sent_packets)
246 return 0;
247
248 ret = altera_cvp_chk_error(mgr, blocks * ALTERA_CVP_V2_SIZE);
249 if (ret) {
250 dev_err(&conf->pci_dev->dev,
251 "CE Bit error credit reg[0x%x]:sent[0x%x]\n",
252 val, conf->sent_packets);
253 return -EAGAIN;
254 }
255
256 /* Limit the check credit byte traffic */
257 usleep_range(V2_CHECK_CREDIT_US, V2_CHECK_CREDIT_US + 1);
258 } while (timeout--);
259
260 dev_err(&conf->pci_dev->dev, "Timeout waiting for credit\n");
261 return -ETIMEDOUT;
262 }
263
264 static int altera_cvp_send_block(struct altera_cvp_conf *conf,
265 const u32 *data, size_t len)
266 {
267 u32 mask, words = len / sizeof(u32);
268 int i, remainder;
269
270 for (i = 0; i < words; i++)
271 conf->write_data(conf, *data++);
272
273 /* write up to 3 trailing bytes, if any */
274 remainder = len % sizeof(u32);
275 if (remainder) {
276 mask = BIT(remainder * 8) - 1;
277 if (mask)
278 conf->write_data(conf, *data & mask);
279 }
280
281 return 0;
282 }
283
284 static int altera_cvp_teardown(struct fpga_manager *mgr,
285 struct fpga_image_info *info)
286 {
287 struct altera_cvp_conf *conf = mgr->priv;
288 int ret;
289 u32 val;
290
291 /* STEP 12 - reset START_XFER bit */
292 altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
293 val &= ~VSE_CVP_PROG_CTRL_START_XFER;
294 altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
295
296 /* STEP 13 - reset CVP_CONFIG bit */
297 val &= ~VSE_CVP_PROG_CTRL_CONFIG;
298 altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
299
300 /*
301 * STEP 14
302 * - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
303 * writes to the HIP
304 */
305 if (conf->priv->switch_clk)
306 conf->priv->switch_clk(conf);
307
308 /* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
309 ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
310 conf->priv->poll_time_us);
311 if (ret)
312 dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
313
314 return ret;
315 }
316
317 static int altera_cvp_write_init(struct fpga_manager *mgr,
318 struct fpga_image_info *info,
319 const char *buf, size_t count)
320 {
321 struct altera_cvp_conf *conf = mgr->priv;
322 u32 iflags, val;
323 int ret;
324
325 iflags = info ? info->flags : 0;
326
327 if (iflags & FPGA_MGR_PARTIAL_RECONFIG) {
328 dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
329 return -EINVAL;
330 }
331
332 /* Determine allowed clock to data ratio */
333 if (iflags & FPGA_MGR_COMPRESSED_BITSTREAM)
334 conf->numclks = 8; /* ratio for all compressed images */
335 else if (iflags & FPGA_MGR_ENCRYPTED_BITSTREAM)
336 conf->numclks = 4; /* for uncompressed and encrypted images */
337 else
338 conf->numclks = 1; /* for uncompressed and unencrypted images */
339
340 /* STEP 1 - read CVP status and check CVP_EN flag */
341 altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
342 if (!(val & VSE_CVP_STATUS_CVP_EN)) {
343 dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
344 return -ENODEV;
345 }
346
347 if (val & VSE_CVP_STATUS_CFG_RDY) {
348 dev_warn(&mgr->dev, "CvP already started, tear down first\n");
349 ret = altera_cvp_teardown(mgr, info);
350 if (ret)
351 return ret;
352 }
353
354 /*
355 * STEP 2
356 * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
357 */
358 /* switch from fabric to PMA clock */
359 altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
360 val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
361 altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
362
363 /* set CVP mode */
364 altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
365 val |= VSE_CVP_MODE_CTRL_CVP_MODE;
366 altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
367
368 /*
369 * STEP 3
370 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
371 */
372 if (conf->priv->switch_clk)
373 conf->priv->switch_clk(conf);
374
375 if (conf->priv->clear_state) {
376 ret = conf->priv->clear_state(conf);
377 if (ret) {
378 dev_err(&mgr->dev, "Problem clearing out state\n");
379 return ret;
380 }
381 }
382
383 conf->sent_packets = 0;
384
385 /* STEP 4 - set CVP_CONFIG bit */
386 altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
387 /* request control block to begin transfer using CVP */
388 val |= VSE_CVP_PROG_CTRL_CONFIG;
389 altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
390
391 /* STEP 5 - poll CVP_CONFIG READY for 1 with timeout */
392 ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
393 VSE_CVP_STATUS_CFG_RDY,
394 conf->priv->poll_time_us);
395 if (ret) {
396 dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
397 return ret;
398 }
399
400 /*
401 * STEP 6
402 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
403 */
404 if (conf->priv->switch_clk)
405 conf->priv->switch_clk(conf);
406
407 if (altera_cvp_chkcfg) {
408 ret = altera_cvp_chk_error(mgr, 0);
409 if (ret) {
410 dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
411 return ret;
412 }
413 }
414
415 /* STEP 7 - set START_XFER */
416 altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
417 val |= VSE_CVP_PROG_CTRL_START_XFER;
418 altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
419
420 /* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
421 if (conf->priv->switch_clk) {
422 altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
423 val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
424 val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
425 altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
426 }
427 return 0;
428 }
429
430 static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
431 size_t count)
432 {
433 struct altera_cvp_conf *conf = mgr->priv;
434 size_t done, remaining, len;
435 const u32 *data;
436 int status = 0;
437
438 /* STEP 9 - write 32-bit data from RBF file to CVP data register */
439 data = (u32 *)buf;
440 remaining = count;
441 done = 0;
442
443 while (remaining) {
444 /* Use credit throttling if available */
445 if (conf->priv->wait_credit) {
446 status = conf->priv->wait_credit(mgr, done);
447 if (status) {
448 dev_err(&conf->pci_dev->dev,
449 "Wait Credit ERR: 0x%x\n", status);
450 return status;
451 }
452 }
453
454 len = min(conf->priv->block_size, remaining);
455 altera_cvp_send_block(conf, data, len);
456 data += len / sizeof(u32);
457 done += len;
458 remaining -= len;
459 conf->sent_packets++;
460
461 /*
462 * STEP 10 (optional) and STEP 11
463 * - check error flag
464 * - loop until data transfer completed
465 * Config images can be huge (more than 40 MiB), so
466 * only check after a new 4k data block has been written.
467 * This reduces the number of checks and speeds up the
468 * configuration process.
469 */
470 if (altera_cvp_chkcfg && !(done % SZ_4K)) {
471 status = altera_cvp_chk_error(mgr, done);
472 if (status < 0)
473 return status;
474 }
475 }
476
477 if (altera_cvp_chkcfg)
478 status = altera_cvp_chk_error(mgr, count);
479
480 return status;
481 }
482
483 static int altera_cvp_write_complete(struct fpga_manager *mgr,
484 struct fpga_image_info *info)
485 {
486 struct altera_cvp_conf *conf = mgr->priv;
487 u32 mask, val;
488 int ret;
489
490 ret = altera_cvp_teardown(mgr, info);
491 if (ret)
492 return ret;
493
494 /* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
495 altera_read_config_dword(conf, VSE_UNCOR_ERR_STATUS, &val);
496 if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
497 dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
498 return -EPROTO;
499 }
500
501 /* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
502 altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
503 val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
504 val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
505 altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
506
507 /* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
508 mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
509 ret = altera_cvp_wait_status(conf, mask, mask,
510 conf->priv->user_time_us);
511 if (ret)
512 dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
513
514 return ret;
515 }
516
517 static const struct fpga_manager_ops altera_cvp_ops = {
518 .state = altera_cvp_state,
519 .write_init = altera_cvp_write_init,
520 .write = altera_cvp_write,
521 .write_complete = altera_cvp_write_complete,
522 };
523
524 static const struct cvp_priv cvp_priv_v1 = {
525 .switch_clk = altera_cvp_dummy_write,
526 .block_size = ALTERA_CVP_V1_SIZE,
527 .poll_time_us = V1_POLL_TIMEOUT_US,
528 .user_time_us = TIMEOUT_US,
529 };
530
531 static const struct cvp_priv cvp_priv_v2 = {
532 .clear_state = altera_cvp_v2_clear_state,
533 .wait_credit = altera_cvp_v2_wait_for_credit,
534 .block_size = ALTERA_CVP_V2_SIZE,
535 .poll_time_us = V2_POLL_TIMEOUT_US,
536 .user_time_us = V2_USER_TIMEOUT_US,
537 };
538
539 static ssize_t chkcfg_show(struct device_driver *dev, char *buf)
540 {
541 return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
542 }
543
544 static ssize_t chkcfg_store(struct device_driver *drv, const char *buf,
545 size_t count)
546 {
547 int ret;
548
549 ret = kstrtobool(buf, &altera_cvp_chkcfg);
550 if (ret)
551 return ret;
552
553 return count;
554 }
555
556 static DRIVER_ATTR_RW(chkcfg);
557
558 static int altera_cvp_probe(struct pci_dev *pdev,
559 const struct pci_device_id *dev_id);
560 static void altera_cvp_remove(struct pci_dev *pdev);
561
562 static struct pci_device_id altera_cvp_id_tbl[] = {
563 { PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
564 { }
565 };
566 MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl);
567
568 static struct pci_driver altera_cvp_driver = {
569 .name = DRV_NAME,
570 .id_table = altera_cvp_id_tbl,
571 .probe = altera_cvp_probe,
572 .remove = altera_cvp_remove,
573 };
574
575 static int altera_cvp_probe(struct pci_dev *pdev,
576 const struct pci_device_id *dev_id)
577 {
578 struct altera_cvp_conf *conf;
579 struct fpga_manager *mgr;
580 int ret, offset;
581 u16 cmd, val;
582 u32 regval;
583
584 /* Discover the Vendor Specific Offset for this device */
585 offset = pci_find_next_ext_capability(pdev, 0, PCI_EXT_CAP_ID_VNDR);
586 if (!offset) {
587 dev_err(&pdev->dev, "No Vendor Specific Offset.\n");
588 return -ENODEV;
589 }
590
591 /*
592 * First check if this is the expected FPGA device. PCI config
593 * space access works without enabling the PCI device, memory
594 * space access is enabled further down.
595 */
596 pci_read_config_word(pdev, offset + VSE_PCIE_EXT_CAP_ID, &val);
597 if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
598 dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
599 return -ENODEV;
600 }
601
602 pci_read_config_dword(pdev, offset + VSE_CVP_STATUS, &regval);
603 if (!(regval & VSE_CVP_STATUS_CVP_EN)) {
604 dev_err(&pdev->dev,
605 "CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
606 regval);
607 return -ENODEV;
608 }
609
610 conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
611 if (!conf)
612 return -ENOMEM;
613
614 conf->vsec_offset = offset;
615
616 /*
617 * Enable memory BAR access. We cannot use pci_enable_device() here
618 * because it will make the driver unusable with FPGA devices that
619 * have additional big IOMEM resources (e.g. 4GiB BARs) on 32-bit
620 * platform. Such BARs will not have an assigned address range and
621 * pci_enable_device() will fail, complaining about not claimed BAR,
622 * even if the concerned BAR is not needed for FPGA configuration
623 * at all. Thus, enable the device via PCI config space command.
624 */
625 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
626 if (!(cmd & PCI_COMMAND_MEMORY)) {
627 cmd |= PCI_COMMAND_MEMORY;
628 pci_write_config_word(pdev, PCI_COMMAND, cmd);
629 }
630
631 ret = pci_request_region(pdev, CVP_BAR, "CVP");
632 if (ret) {
633 dev_err(&pdev->dev, "Requesting CVP BAR region failed\n");
634 goto err_disable;
635 }
636
637 conf->pci_dev = pdev;
638 conf->write_data = altera_cvp_write_data_iomem;
639
640 if (conf->vsec_offset == V1_VSEC_OFFSET)
641 conf->priv = &cvp_priv_v1;
642 else
643 conf->priv = &cvp_priv_v2;
644
645 conf->map = pci_iomap(pdev, CVP_BAR, 0);
646 if (!conf->map) {
647 dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
648 conf->write_data = altera_cvp_write_data_config;
649 }
650
651 snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%s",
652 ALTERA_CVP_MGR_NAME, pci_name(pdev));
653
654 mgr = fpga_mgr_register(&pdev->dev, conf->mgr_name,
655 &altera_cvp_ops, conf);
656 if (IS_ERR(mgr)) {
657 ret = PTR_ERR(mgr);
658 goto err_unmap;
659 }
660
661 pci_set_drvdata(pdev, mgr);
662
663 return 0;
664
665 err_unmap:
666 if (conf->map)
667 pci_iounmap(pdev, conf->map);
668 pci_release_region(pdev, CVP_BAR);
669 err_disable:
670 cmd &= ~PCI_COMMAND_MEMORY;
671 pci_write_config_word(pdev, PCI_COMMAND, cmd);
672 return ret;
673 }
674
675 static void altera_cvp_remove(struct pci_dev *pdev)
676 {
677 struct fpga_manager *mgr = pci_get_drvdata(pdev);
678 struct altera_cvp_conf *conf = mgr->priv;
679 u16 cmd;
680
681 fpga_mgr_unregister(mgr);
682 if (conf->map)
683 pci_iounmap(pdev, conf->map);
684 pci_release_region(pdev, CVP_BAR);
685 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
686 cmd &= ~PCI_COMMAND_MEMORY;
687 pci_write_config_word(pdev, PCI_COMMAND, cmd);
688 }
689
690 static int __init altera_cvp_init(void)
691 {
692 int ret;
693
694 ret = pci_register_driver(&altera_cvp_driver);
695 if (ret)
696 return ret;
697
698 ret = driver_create_file(&altera_cvp_driver.driver,
699 &driver_attr_chkcfg);
700 if (ret)
701 pr_warn("Can't create sysfs chkcfg file\n");
702
703 return 0;
704 }
705
706 static void __exit altera_cvp_exit(void)
707 {
708 driver_remove_file(&altera_cvp_driver.driver, &driver_attr_chkcfg);
709 pci_unregister_driver(&altera_cvp_driver);
710 }
711
712 module_init(altera_cvp_init);
713 module_exit(altera_cvp_exit);
714
715 MODULE_LICENSE("GPL v2");
716 MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
717 MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");
Linux Kernel