3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix
;
39 static bool force_scofix
;
41 static bool reset
= true;
43 static struct usb_driver btusb_driver
;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
64 #define BTUSB_IFNUM_2 0x80000
65 #define BTUSB_CW6622 0x100000
67 static const struct usb_device_id btusb_table
[] = {
68 /* Generic Bluetooth USB device */
69 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
71 /* Generic Bluetooth AMP device */
72 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info
= BTUSB_AMP
},
74 /* Generic Bluetooth USB interface */
75 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
77 /* Apple-specific (Broadcom) devices */
78 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
79 .driver_info
= BTUSB_BCM_APPLE
| BTUSB_IFNUM_2
},
81 /* MediaTek MT76x0E */
82 { USB_DEVICE(0x0e8d, 0x763f) },
84 /* Broadcom SoftSailing reporting vendor specific */
85 { USB_DEVICE(0x0a5c, 0x21e1) },
87 /* Apple MacBookPro 7,1 */
88 { USB_DEVICE(0x05ac, 0x8213) },
91 { USB_DEVICE(0x05ac, 0x8215) },
93 /* Apple MacBookPro6,2 */
94 { USB_DEVICE(0x05ac, 0x8218) },
96 /* Apple MacBookAir3,1, MacBookAir3,2 */
97 { USB_DEVICE(0x05ac, 0x821b) },
99 /* Apple MacBookAir4,1 */
100 { USB_DEVICE(0x05ac, 0x821f) },
102 /* Apple MacBookPro8,2 */
103 { USB_DEVICE(0x05ac, 0x821a) },
105 /* Apple MacMini5,1 */
106 { USB_DEVICE(0x05ac, 0x8281) },
108 /* AVM BlueFRITZ! USB v2.0 */
109 { USB_DEVICE(0x057c, 0x3800), .driver_info
= BTUSB_SWAVE
},
111 /* Bluetooth Ultraport Module from IBM */
112 { USB_DEVICE(0x04bf, 0x030a) },
114 /* ALPS Modules with non-standard id */
115 { USB_DEVICE(0x044e, 0x3001) },
116 { USB_DEVICE(0x044e, 0x3002) },
118 /* Ericsson with non-standard id */
119 { USB_DEVICE(0x0bdb, 0x1002) },
121 /* Canyon CN-BTU1 with HID interfaces */
122 { USB_DEVICE(0x0c10, 0x0000) },
124 /* Broadcom BCM20702A0 */
125 { USB_DEVICE(0x413c, 0x8197) },
127 /* Broadcom BCM20702B0 (Dynex/Insignia) */
128 { USB_DEVICE(0x19ff, 0x0239), .driver_info
= BTUSB_BCM_PATCHRAM
},
130 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
131 { USB_DEVICE(0x105b, 0xe065), .driver_info
= BTUSB_BCM_PATCHRAM
},
133 /* Foxconn - Hon Hai */
134 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
135 .driver_info
= BTUSB_BCM_PATCHRAM
},
137 /* Lite-On Technology - Broadcom based */
138 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
139 .driver_info
= BTUSB_BCM_PATCHRAM
},
141 /* Broadcom devices with vendor specific id */
142 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
143 .driver_info
= BTUSB_BCM_PATCHRAM
},
145 /* ASUSTek Computer - Broadcom based */
146 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
147 .driver_info
= BTUSB_BCM_PATCHRAM
},
149 /* Belkin F8065bf - Broadcom based */
150 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
151 .driver_info
= BTUSB_BCM_PATCHRAM
},
153 /* IMC Networks - Broadcom based */
154 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
155 .driver_info
= BTUSB_BCM_PATCHRAM
},
157 /* Toshiba Corp - Broadcom based */
158 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
159 .driver_info
= BTUSB_BCM_PATCHRAM
},
161 /* Intel Bluetooth USB Bootloader (RAM module) */
162 { USB_DEVICE(0x8087, 0x0a5a),
163 .driver_info
= BTUSB_INTEL_BOOT
| BTUSB_BROKEN_ISOC
},
165 { } /* Terminating entry */
168 MODULE_DEVICE_TABLE(usb
, btusb_table
);
170 static const struct usb_device_id blacklist_table
[] = {
171 /* CSR BlueCore devices */
172 { USB_DEVICE(0x0a12, 0x0001), .driver_info
= BTUSB_CSR
},
174 /* Broadcom BCM2033 without firmware */
175 { USB_DEVICE(0x0a5c, 0x2033), .driver_info
= BTUSB_IGNORE
},
177 /* Broadcom BCM2045 devices */
178 { USB_DEVICE(0x0a5c, 0x2045), .driver_info
= BTUSB_BCM2045
},
180 /* Atheros 3011 with sflash firmware */
181 { USB_DEVICE(0x0489, 0xe027), .driver_info
= BTUSB_IGNORE
},
182 { USB_DEVICE(0x0489, 0xe03d), .driver_info
= BTUSB_IGNORE
},
183 { USB_DEVICE(0x04f2, 0xaff1), .driver_info
= BTUSB_IGNORE
},
184 { USB_DEVICE(0x0930, 0x0215), .driver_info
= BTUSB_IGNORE
},
185 { USB_DEVICE(0x0cf3, 0x3002), .driver_info
= BTUSB_IGNORE
},
186 { USB_DEVICE(0x0cf3, 0xe019), .driver_info
= BTUSB_IGNORE
},
187 { USB_DEVICE(0x13d3, 0x3304), .driver_info
= BTUSB_IGNORE
},
189 /* Atheros AR9285 Malbec with sflash firmware */
190 { USB_DEVICE(0x03f0, 0x311d), .driver_info
= BTUSB_IGNORE
},
192 /* Atheros 3012 with sflash firmware */
193 { USB_DEVICE(0x0489, 0xe04d), .driver_info
= BTUSB_ATH3012
},
194 { USB_DEVICE(0x0489, 0xe04e), .driver_info
= BTUSB_ATH3012
},
195 { USB_DEVICE(0x0489, 0xe056), .driver_info
= BTUSB_ATH3012
},
196 { USB_DEVICE(0x0489, 0xe057), .driver_info
= BTUSB_ATH3012
},
197 { USB_DEVICE(0x0489, 0xe05f), .driver_info
= BTUSB_ATH3012
},
198 { USB_DEVICE(0x0489, 0xe076), .driver_info
= BTUSB_ATH3012
},
199 { USB_DEVICE(0x0489, 0xe078), .driver_info
= BTUSB_ATH3012
},
200 { USB_DEVICE(0x0489, 0xe095), .driver_info
= BTUSB_ATH3012
},
201 { USB_DEVICE(0x04c5, 0x1330), .driver_info
= BTUSB_ATH3012
},
202 { USB_DEVICE(0x04ca, 0x3004), .driver_info
= BTUSB_ATH3012
},
203 { USB_DEVICE(0x04ca, 0x3005), .driver_info
= BTUSB_ATH3012
},
204 { USB_DEVICE(0x04ca, 0x3006), .driver_info
= BTUSB_ATH3012
},
205 { USB_DEVICE(0x04ca, 0x3007), .driver_info
= BTUSB_ATH3012
},
206 { USB_DEVICE(0x04ca, 0x3008), .driver_info
= BTUSB_ATH3012
},
207 { USB_DEVICE(0x04ca, 0x300b), .driver_info
= BTUSB_ATH3012
},
208 { USB_DEVICE(0x04ca, 0x300d), .driver_info
= BTUSB_ATH3012
},
209 { USB_DEVICE(0x04ca, 0x300f), .driver_info
= BTUSB_ATH3012
},
210 { USB_DEVICE(0x04ca, 0x3010), .driver_info
= BTUSB_ATH3012
},
211 { USB_DEVICE(0x04ca, 0x3014), .driver_info
= BTUSB_ATH3012
},
212 { USB_DEVICE(0x0930, 0x0219), .driver_info
= BTUSB_ATH3012
},
213 { USB_DEVICE(0x0930, 0x021c), .driver_info
= BTUSB_ATH3012
},
214 { USB_DEVICE(0x0930, 0x0220), .driver_info
= BTUSB_ATH3012
},
215 { USB_DEVICE(0x0930, 0x0227), .driver_info
= BTUSB_ATH3012
},
216 { USB_DEVICE(0x0b05, 0x17d0), .driver_info
= BTUSB_ATH3012
},
217 { USB_DEVICE(0x0cf3, 0x0036), .driver_info
= BTUSB_ATH3012
},
218 { USB_DEVICE(0x0cf3, 0x3004), .driver_info
= BTUSB_ATH3012
},
219 { USB_DEVICE(0x0cf3, 0x3008), .driver_info
= BTUSB_ATH3012
},
220 { USB_DEVICE(0x0cf3, 0x311d), .driver_info
= BTUSB_ATH3012
},
221 { USB_DEVICE(0x0cf3, 0x311e), .driver_info
= BTUSB_ATH3012
},
222 { USB_DEVICE(0x0cf3, 0x311f), .driver_info
= BTUSB_ATH3012
},
223 { USB_DEVICE(0x0cf3, 0x3121), .driver_info
= BTUSB_ATH3012
},
224 { USB_DEVICE(0x0cf3, 0x817a), .driver_info
= BTUSB_ATH3012
},
225 { USB_DEVICE(0x0cf3, 0x817b), .driver_info
= BTUSB_ATH3012
},
226 { USB_DEVICE(0x0cf3, 0xe003), .driver_info
= BTUSB_ATH3012
},
227 { USB_DEVICE(0x0cf3, 0xe004), .driver_info
= BTUSB_ATH3012
},
228 { USB_DEVICE(0x0cf3, 0xe005), .driver_info
= BTUSB_ATH3012
},
229 { USB_DEVICE(0x0cf3, 0xe006), .driver_info
= BTUSB_ATH3012
},
230 { USB_DEVICE(0x13d3, 0x3362), .driver_info
= BTUSB_ATH3012
},
231 { USB_DEVICE(0x13d3, 0x3375), .driver_info
= BTUSB_ATH3012
},
232 { USB_DEVICE(0x13d3, 0x3393), .driver_info
= BTUSB_ATH3012
},
233 { USB_DEVICE(0x13d3, 0x3395), .driver_info
= BTUSB_ATH3012
},
234 { USB_DEVICE(0x13d3, 0x3402), .driver_info
= BTUSB_ATH3012
},
235 { USB_DEVICE(0x13d3, 0x3408), .driver_info
= BTUSB_ATH3012
},
236 { USB_DEVICE(0x13d3, 0x3423), .driver_info
= BTUSB_ATH3012
},
237 { USB_DEVICE(0x13d3, 0x3432), .driver_info
= BTUSB_ATH3012
},
238 { USB_DEVICE(0x13d3, 0x3472), .driver_info
= BTUSB_ATH3012
},
239 { USB_DEVICE(0x13d3, 0x3474), .driver_info
= BTUSB_ATH3012
},
240 { USB_DEVICE(0x13d3, 0x3487), .driver_info
= BTUSB_ATH3012
},
241 { USB_DEVICE(0x13d3, 0x3490), .driver_info
= BTUSB_ATH3012
},
243 /* Atheros AR5BBU12 with sflash firmware */
244 { USB_DEVICE(0x0489, 0xe02c), .driver_info
= BTUSB_IGNORE
},
246 /* Atheros AR5BBU12 with sflash firmware */
247 { USB_DEVICE(0x0489, 0xe036), .driver_info
= BTUSB_ATH3012
},
248 { USB_DEVICE(0x0489, 0xe03c), .driver_info
= BTUSB_ATH3012
},
250 /* QCA ROME chipset */
251 { USB_DEVICE(0x0cf3, 0xe007), .driver_info
= BTUSB_QCA_ROME
},
252 { USB_DEVICE(0x0cf3, 0xe009), .driver_info
= BTUSB_QCA_ROME
},
253 { USB_DEVICE(0x0cf3, 0xe300), .driver_info
= BTUSB_QCA_ROME
},
254 { USB_DEVICE(0x0cf3, 0xe360), .driver_info
= BTUSB_QCA_ROME
},
255 { USB_DEVICE(0x0489, 0xe092), .driver_info
= BTUSB_QCA_ROME
},
256 { USB_DEVICE(0x04ca, 0x3011), .driver_info
= BTUSB_QCA_ROME
},
258 /* Broadcom BCM2035 */
259 { USB_DEVICE(0x0a5c, 0x2009), .driver_info
= BTUSB_BCM92035
},
260 { USB_DEVICE(0x0a5c, 0x200a), .driver_info
= BTUSB_WRONG_SCO_MTU
},
261 { USB_DEVICE(0x0a5c, 0x2035), .driver_info
= BTUSB_WRONG_SCO_MTU
},
263 /* Broadcom BCM2045 */
264 { USB_DEVICE(0x0a5c, 0x2039), .driver_info
= BTUSB_WRONG_SCO_MTU
},
265 { USB_DEVICE(0x0a5c, 0x2101), .driver_info
= BTUSB_WRONG_SCO_MTU
},
267 /* IBM/Lenovo ThinkPad with Broadcom chip */
268 { USB_DEVICE(0x0a5c, 0x201e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
269 { USB_DEVICE(0x0a5c, 0x2110), .driver_info
= BTUSB_WRONG_SCO_MTU
},
271 /* HP laptop with Broadcom chip */
272 { USB_DEVICE(0x03f0, 0x171d), .driver_info
= BTUSB_WRONG_SCO_MTU
},
274 /* Dell laptop with Broadcom chip */
275 { USB_DEVICE(0x413c, 0x8126), .driver_info
= BTUSB_WRONG_SCO_MTU
},
277 /* Dell Wireless 370 and 410 devices */
278 { USB_DEVICE(0x413c, 0x8152), .driver_info
= BTUSB_WRONG_SCO_MTU
},
279 { USB_DEVICE(0x413c, 0x8156), .driver_info
= BTUSB_WRONG_SCO_MTU
},
281 /* Belkin F8T012 and F8T013 devices */
282 { USB_DEVICE(0x050d, 0x0012), .driver_info
= BTUSB_WRONG_SCO_MTU
},
283 { USB_DEVICE(0x050d, 0x0013), .driver_info
= BTUSB_WRONG_SCO_MTU
},
285 /* Asus WL-BTD202 device */
286 { USB_DEVICE(0x0b05, 0x1715), .driver_info
= BTUSB_WRONG_SCO_MTU
},
288 /* Kensington Bluetooth USB adapter */
289 { USB_DEVICE(0x047d, 0x105e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
291 /* RTX Telecom based adapters with buggy SCO support */
292 { USB_DEVICE(0x0400, 0x0807), .driver_info
= BTUSB_BROKEN_ISOC
},
293 { USB_DEVICE(0x0400, 0x080a), .driver_info
= BTUSB_BROKEN_ISOC
},
295 /* CONWISE Technology based adapters with buggy SCO support */
296 { USB_DEVICE(0x0e5e, 0x6622),
297 .driver_info
= BTUSB_BROKEN_ISOC
| BTUSB_CW6622
},
299 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
300 { USB_DEVICE(0x1310, 0x0001), .driver_info
= BTUSB_SWAVE
},
302 /* Digianswer devices */
303 { USB_DEVICE(0x08fd, 0x0001), .driver_info
= BTUSB_DIGIANSWER
},
304 { USB_DEVICE(0x08fd, 0x0002), .driver_info
= BTUSB_IGNORE
},
306 /* CSR BlueCore Bluetooth Sniffer */
307 { USB_DEVICE(0x0a12, 0x0002),
308 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
310 /* Frontline ComProbe Bluetooth Sniffer */
311 { USB_DEVICE(0x16d3, 0x0002),
312 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
314 /* Marvell Bluetooth devices */
315 { USB_DEVICE(0x1286, 0x2044), .driver_info
= BTUSB_MARVELL
},
316 { USB_DEVICE(0x1286, 0x2046), .driver_info
= BTUSB_MARVELL
},
318 /* Intel Bluetooth devices */
319 { USB_DEVICE(0x8087, 0x07da), .driver_info
= BTUSB_CSR
},
320 { USB_DEVICE(0x8087, 0x07dc), .driver_info
= BTUSB_INTEL
},
321 { USB_DEVICE(0x8087, 0x0a2a), .driver_info
= BTUSB_INTEL
},
322 { USB_DEVICE(0x8087, 0x0a2b), .driver_info
= BTUSB_INTEL_NEW
},
323 { USB_DEVICE(0x8087, 0x0aa7), .driver_info
= BTUSB_INTEL
},
325 /* Other Intel Bluetooth devices */
326 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
327 .driver_info
= BTUSB_IGNORE
},
329 /* Realtek Bluetooth devices */
330 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
331 .driver_info
= BTUSB_REALTEK
},
333 /* Additional Realtek 8723AE Bluetooth devices */
334 { USB_DEVICE(0x0930, 0x021d), .driver_info
= BTUSB_REALTEK
},
335 { USB_DEVICE(0x13d3, 0x3394), .driver_info
= BTUSB_REALTEK
},
337 /* Additional Realtek 8723BE Bluetooth devices */
338 { USB_DEVICE(0x0489, 0xe085), .driver_info
= BTUSB_REALTEK
},
339 { USB_DEVICE(0x0489, 0xe08b), .driver_info
= BTUSB_REALTEK
},
340 { USB_DEVICE(0x13d3, 0x3410), .driver_info
= BTUSB_REALTEK
},
341 { USB_DEVICE(0x13d3, 0x3416), .driver_info
= BTUSB_REALTEK
},
342 { USB_DEVICE(0x13d3, 0x3459), .driver_info
= BTUSB_REALTEK
},
344 /* Additional Realtek 8821AE Bluetooth devices */
345 { USB_DEVICE(0x0b05, 0x17dc), .driver_info
= BTUSB_REALTEK
},
346 { USB_DEVICE(0x13d3, 0x3414), .driver_info
= BTUSB_REALTEK
},
347 { USB_DEVICE(0x13d3, 0x3458), .driver_info
= BTUSB_REALTEK
},
348 { USB_DEVICE(0x13d3, 0x3461), .driver_info
= BTUSB_REALTEK
},
349 { USB_DEVICE(0x13d3, 0x3462), .driver_info
= BTUSB_REALTEK
},
351 /* Silicon Wave based devices */
352 { USB_DEVICE(0x0c10, 0x0000), .driver_info
= BTUSB_SWAVE
},
354 { } /* Terminating entry */
357 #define BTUSB_MAX_ISOC_FRAMES 10
359 #define BTUSB_INTR_RUNNING 0
360 #define BTUSB_BULK_RUNNING 1
361 #define BTUSB_ISOC_RUNNING 2
362 #define BTUSB_SUSPENDING 3
363 #define BTUSB_DID_ISO_RESUME 4
364 #define BTUSB_BOOTLOADER 5
365 #define BTUSB_DOWNLOADING 6
366 #define BTUSB_FIRMWARE_LOADED 7
367 #define BTUSB_FIRMWARE_FAILED 8
368 #define BTUSB_BOOTING 9
369 #define BTUSB_RESET_RESUME 10
370 #define BTUSB_DIAG_RUNNING 11
373 struct hci_dev
*hdev
;
374 struct usb_device
*udev
;
375 struct usb_interface
*intf
;
376 struct usb_interface
*isoc
;
377 struct usb_interface
*diag
;
381 struct work_struct work
;
382 struct work_struct waker
;
384 struct usb_anchor deferred
;
385 struct usb_anchor tx_anchor
;
389 struct usb_anchor intr_anchor
;
390 struct usb_anchor bulk_anchor
;
391 struct usb_anchor isoc_anchor
;
392 struct usb_anchor diag_anchor
;
395 struct sk_buff
*evt_skb
;
396 struct sk_buff
*acl_skb
;
397 struct sk_buff
*sco_skb
;
399 struct usb_endpoint_descriptor
*intr_ep
;
400 struct usb_endpoint_descriptor
*bulk_tx_ep
;
401 struct usb_endpoint_descriptor
*bulk_rx_ep
;
402 struct usb_endpoint_descriptor
*isoc_tx_ep
;
403 struct usb_endpoint_descriptor
*isoc_rx_ep
;
404 struct usb_endpoint_descriptor
*diag_tx_ep
;
405 struct usb_endpoint_descriptor
*diag_rx_ep
;
410 unsigned int sco_num
;
414 int (*recv_event
)(struct hci_dev
*hdev
, struct sk_buff
*skb
);
415 int (*recv_bulk
)(struct btusb_data
*data
, void *buffer
, int count
);
417 int (*setup_on_usb
)(struct hci_dev
*hdev
);
420 static inline void btusb_free_frags(struct btusb_data
*data
)
424 spin_lock_irqsave(&data
->rxlock
, flags
);
426 kfree_skb(data
->evt_skb
);
427 data
->evt_skb
= NULL
;
429 kfree_skb(data
->acl_skb
);
430 data
->acl_skb
= NULL
;
432 kfree_skb(data
->sco_skb
);
433 data
->sco_skb
= NULL
;
435 spin_unlock_irqrestore(&data
->rxlock
, flags
);
438 static int btusb_recv_intr(struct btusb_data
*data
, void *buffer
, int count
)
443 spin_lock(&data
->rxlock
);
450 skb
= bt_skb_alloc(HCI_MAX_EVENT_SIZE
, GFP_ATOMIC
);
456 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
457 hci_skb_expect(skb
) = HCI_EVENT_HDR_SIZE
;
460 len
= min_t(uint
, hci_skb_expect(skb
), count
);
461 memcpy(skb_put(skb
, len
), buffer
, len
);
465 hci_skb_expect(skb
) -= len
;
467 if (skb
->len
== HCI_EVENT_HDR_SIZE
) {
468 /* Complete event header */
469 hci_skb_expect(skb
) = hci_event_hdr(skb
)->plen
;
471 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
480 if (!hci_skb_expect(skb
)) {
482 data
->recv_event(data
->hdev
, skb
);
488 spin_unlock(&data
->rxlock
);
493 static int btusb_recv_bulk(struct btusb_data
*data
, void *buffer
, int count
)
498 spin_lock(&data
->rxlock
);
505 skb
= bt_skb_alloc(HCI_MAX_FRAME_SIZE
, GFP_ATOMIC
);
511 hci_skb_pkt_type(skb
) = HCI_ACLDATA_PKT
;
512 hci_skb_expect(skb
) = HCI_ACL_HDR_SIZE
;
515 len
= min_t(uint
, hci_skb_expect(skb
), count
);
516 memcpy(skb_put(skb
, len
), buffer
, len
);
520 hci_skb_expect(skb
) -= len
;
522 if (skb
->len
== HCI_ACL_HDR_SIZE
) {
523 __le16 dlen
= hci_acl_hdr(skb
)->dlen
;
525 /* Complete ACL header */
526 hci_skb_expect(skb
) = __le16_to_cpu(dlen
);
528 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
537 if (!hci_skb_expect(skb
)) {
539 hci_recv_frame(data
->hdev
, skb
);
545 spin_unlock(&data
->rxlock
);
550 static int btusb_recv_isoc(struct btusb_data
*data
, void *buffer
, int count
)
555 spin_lock(&data
->rxlock
);
562 skb
= bt_skb_alloc(HCI_MAX_SCO_SIZE
, GFP_ATOMIC
);
568 hci_skb_pkt_type(skb
) = HCI_SCODATA_PKT
;
569 hci_skb_expect(skb
) = HCI_SCO_HDR_SIZE
;
572 len
= min_t(uint
, hci_skb_expect(skb
), count
);
573 memcpy(skb_put(skb
, len
), buffer
, len
);
577 hci_skb_expect(skb
) -= len
;
579 if (skb
->len
== HCI_SCO_HDR_SIZE
) {
580 /* Complete SCO header */
581 hci_skb_expect(skb
) = hci_sco_hdr(skb
)->dlen
;
583 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
592 if (!hci_skb_expect(skb
)) {
594 hci_recv_frame(data
->hdev
, skb
);
600 spin_unlock(&data
->rxlock
);
605 static void btusb_intr_complete(struct urb
*urb
)
607 struct hci_dev
*hdev
= urb
->context
;
608 struct btusb_data
*data
= hci_get_drvdata(hdev
);
611 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
614 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
617 if (urb
->status
== 0) {
618 hdev
->stat
.byte_rx
+= urb
->actual_length
;
620 if (btusb_recv_intr(data
, urb
->transfer_buffer
,
621 urb
->actual_length
) < 0) {
622 BT_ERR("%s corrupted event packet", hdev
->name
);
625 } else if (urb
->status
== -ENOENT
) {
626 /* Avoid suspend failed when usb_kill_urb */
630 if (!test_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
633 usb_mark_last_busy(data
->udev
);
634 usb_anchor_urb(urb
, &data
->intr_anchor
);
636 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
638 /* -EPERM: urb is being killed;
639 * -ENODEV: device got disconnected */
640 if (err
!= -EPERM
&& err
!= -ENODEV
)
641 BT_ERR("%s urb %p failed to resubmit (%d)",
642 hdev
->name
, urb
, -err
);
643 usb_unanchor_urb(urb
);
647 static int btusb_submit_intr_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
649 struct btusb_data
*data
= hci_get_drvdata(hdev
);
655 BT_DBG("%s", hdev
->name
);
660 urb
= usb_alloc_urb(0, mem_flags
);
664 size
= le16_to_cpu(data
->intr_ep
->wMaxPacketSize
);
666 buf
= kmalloc(size
, mem_flags
);
672 pipe
= usb_rcvintpipe(data
->udev
, data
->intr_ep
->bEndpointAddress
);
674 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
,
675 btusb_intr_complete
, hdev
, data
->intr_ep
->bInterval
);
677 urb
->transfer_flags
|= URB_FREE_BUFFER
;
679 usb_anchor_urb(urb
, &data
->intr_anchor
);
681 err
= usb_submit_urb(urb
, mem_flags
);
683 if (err
!= -EPERM
&& err
!= -ENODEV
)
684 BT_ERR("%s urb %p submission failed (%d)",
685 hdev
->name
, urb
, -err
);
686 usb_unanchor_urb(urb
);
694 static void btusb_bulk_complete(struct urb
*urb
)
696 struct hci_dev
*hdev
= urb
->context
;
697 struct btusb_data
*data
= hci_get_drvdata(hdev
);
700 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
703 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
706 if (urb
->status
== 0) {
707 hdev
->stat
.byte_rx
+= urb
->actual_length
;
709 if (data
->recv_bulk(data
, urb
->transfer_buffer
,
710 urb
->actual_length
) < 0) {
711 BT_ERR("%s corrupted ACL packet", hdev
->name
);
714 } else if (urb
->status
== -ENOENT
) {
715 /* Avoid suspend failed when usb_kill_urb */
719 if (!test_bit(BTUSB_BULK_RUNNING
, &data
->flags
))
722 usb_anchor_urb(urb
, &data
->bulk_anchor
);
723 usb_mark_last_busy(data
->udev
);
725 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
727 /* -EPERM: urb is being killed;
728 * -ENODEV: device got disconnected */
729 if (err
!= -EPERM
&& err
!= -ENODEV
)
730 BT_ERR("%s urb %p failed to resubmit (%d)",
731 hdev
->name
, urb
, -err
);
732 usb_unanchor_urb(urb
);
736 static int btusb_submit_bulk_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
738 struct btusb_data
*data
= hci_get_drvdata(hdev
);
742 int err
, size
= HCI_MAX_FRAME_SIZE
;
744 BT_DBG("%s", hdev
->name
);
746 if (!data
->bulk_rx_ep
)
749 urb
= usb_alloc_urb(0, mem_flags
);
753 buf
= kmalloc(size
, mem_flags
);
759 pipe
= usb_rcvbulkpipe(data
->udev
, data
->bulk_rx_ep
->bEndpointAddress
);
761 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
762 btusb_bulk_complete
, hdev
);
764 urb
->transfer_flags
|= URB_FREE_BUFFER
;
766 usb_mark_last_busy(data
->udev
);
767 usb_anchor_urb(urb
, &data
->bulk_anchor
);
769 err
= usb_submit_urb(urb
, mem_flags
);
771 if (err
!= -EPERM
&& err
!= -ENODEV
)
772 BT_ERR("%s urb %p submission failed (%d)",
773 hdev
->name
, urb
, -err
);
774 usb_unanchor_urb(urb
);
782 static void btusb_isoc_complete(struct urb
*urb
)
784 struct hci_dev
*hdev
= urb
->context
;
785 struct btusb_data
*data
= hci_get_drvdata(hdev
);
788 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
791 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
794 if (urb
->status
== 0) {
795 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
796 unsigned int offset
= urb
->iso_frame_desc
[i
].offset
;
797 unsigned int length
= urb
->iso_frame_desc
[i
].actual_length
;
799 if (urb
->iso_frame_desc
[i
].status
)
802 hdev
->stat
.byte_rx
+= length
;
804 if (btusb_recv_isoc(data
, urb
->transfer_buffer
+ offset
,
806 BT_ERR("%s corrupted SCO packet", hdev
->name
);
810 } else if (urb
->status
== -ENOENT
) {
811 /* Avoid suspend failed when usb_kill_urb */
815 if (!test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
))
818 usb_anchor_urb(urb
, &data
->isoc_anchor
);
820 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
822 /* -EPERM: urb is being killed;
823 * -ENODEV: device got disconnected */
824 if (err
!= -EPERM
&& err
!= -ENODEV
)
825 BT_ERR("%s urb %p failed to resubmit (%d)",
826 hdev
->name
, urb
, -err
);
827 usb_unanchor_urb(urb
);
831 static inline void __fill_isoc_descriptor(struct urb
*urb
, int len
, int mtu
)
835 BT_DBG("len %d mtu %d", len
, mtu
);
837 for (i
= 0; i
< BTUSB_MAX_ISOC_FRAMES
&& len
>= mtu
;
838 i
++, offset
+= mtu
, len
-= mtu
) {
839 urb
->iso_frame_desc
[i
].offset
= offset
;
840 urb
->iso_frame_desc
[i
].length
= mtu
;
843 if (len
&& i
< BTUSB_MAX_ISOC_FRAMES
) {
844 urb
->iso_frame_desc
[i
].offset
= offset
;
845 urb
->iso_frame_desc
[i
].length
= len
;
849 urb
->number_of_packets
= i
;
852 static int btusb_submit_isoc_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
854 struct btusb_data
*data
= hci_get_drvdata(hdev
);
860 BT_DBG("%s", hdev
->name
);
862 if (!data
->isoc_rx_ep
)
865 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, mem_flags
);
869 size
= le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
) *
870 BTUSB_MAX_ISOC_FRAMES
;
872 buf
= kmalloc(size
, mem_flags
);
878 pipe
= usb_rcvisocpipe(data
->udev
, data
->isoc_rx_ep
->bEndpointAddress
);
880 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
, btusb_isoc_complete
,
881 hdev
, data
->isoc_rx_ep
->bInterval
);
883 urb
->transfer_flags
= URB_FREE_BUFFER
| URB_ISO_ASAP
;
885 __fill_isoc_descriptor(urb
, size
,
886 le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
));
888 usb_anchor_urb(urb
, &data
->isoc_anchor
);
890 err
= usb_submit_urb(urb
, mem_flags
);
892 if (err
!= -EPERM
&& err
!= -ENODEV
)
893 BT_ERR("%s urb %p submission failed (%d)",
894 hdev
->name
, urb
, -err
);
895 usb_unanchor_urb(urb
);
903 static void btusb_diag_complete(struct urb
*urb
)
905 struct hci_dev
*hdev
= urb
->context
;
906 struct btusb_data
*data
= hci_get_drvdata(hdev
);
909 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
912 if (urb
->status
== 0) {
915 skb
= bt_skb_alloc(urb
->actual_length
, GFP_ATOMIC
);
917 memcpy(skb_put(skb
, urb
->actual_length
),
918 urb
->transfer_buffer
, urb
->actual_length
);
919 hci_recv_diag(hdev
, skb
);
921 } else if (urb
->status
== -ENOENT
) {
922 /* Avoid suspend failed when usb_kill_urb */
926 if (!test_bit(BTUSB_DIAG_RUNNING
, &data
->flags
))
929 usb_anchor_urb(urb
, &data
->diag_anchor
);
930 usb_mark_last_busy(data
->udev
);
932 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
934 /* -EPERM: urb is being killed;
935 * -ENODEV: device got disconnected */
936 if (err
!= -EPERM
&& err
!= -ENODEV
)
937 BT_ERR("%s urb %p failed to resubmit (%d)",
938 hdev
->name
, urb
, -err
);
939 usb_unanchor_urb(urb
);
943 static int btusb_submit_diag_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
945 struct btusb_data
*data
= hci_get_drvdata(hdev
);
949 int err
, size
= HCI_MAX_FRAME_SIZE
;
951 BT_DBG("%s", hdev
->name
);
953 if (!data
->diag_rx_ep
)
956 urb
= usb_alloc_urb(0, mem_flags
);
960 buf
= kmalloc(size
, mem_flags
);
966 pipe
= usb_rcvbulkpipe(data
->udev
, data
->diag_rx_ep
->bEndpointAddress
);
968 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
969 btusb_diag_complete
, hdev
);
971 urb
->transfer_flags
|= URB_FREE_BUFFER
;
973 usb_mark_last_busy(data
->udev
);
974 usb_anchor_urb(urb
, &data
->diag_anchor
);
976 err
= usb_submit_urb(urb
, mem_flags
);
978 if (err
!= -EPERM
&& err
!= -ENODEV
)
979 BT_ERR("%s urb %p submission failed (%d)",
980 hdev
->name
, urb
, -err
);
981 usb_unanchor_urb(urb
);
989 static void btusb_tx_complete(struct urb
*urb
)
991 struct sk_buff
*skb
= urb
->context
;
992 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
993 struct btusb_data
*data
= hci_get_drvdata(hdev
);
995 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
998 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1002 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
1004 hdev
->stat
.err_tx
++;
1007 spin_lock(&data
->txlock
);
1008 data
->tx_in_flight
--;
1009 spin_unlock(&data
->txlock
);
1011 kfree(urb
->setup_packet
);
1016 static void btusb_isoc_tx_complete(struct urb
*urb
)
1018 struct sk_buff
*skb
= urb
->context
;
1019 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
1021 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
1022 urb
->actual_length
);
1024 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1028 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
1030 hdev
->stat
.err_tx
++;
1033 kfree(urb
->setup_packet
);
1038 static int btusb_open(struct hci_dev
*hdev
)
1040 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1043 BT_DBG("%s", hdev
->name
);
1045 /* Patching USB firmware files prior to starting any URBs of HCI path
1046 * It is more safe to use USB bulk channel for downloading USB patch
1048 if (data
->setup_on_usb
) {
1049 err
= data
->setup_on_usb(hdev
);
1054 err
= usb_autopm_get_interface(data
->intf
);
1058 data
->intf
->needs_remote_wakeup
= 1;
1060 if (test_and_set_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
1063 err
= btusb_submit_intr_urb(hdev
, GFP_KERNEL
);
1067 err
= btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1069 usb_kill_anchored_urbs(&data
->intr_anchor
);
1073 set_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1074 btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1077 if (!btusb_submit_diag_urb(hdev
, GFP_KERNEL
))
1078 set_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1082 usb_autopm_put_interface(data
->intf
);
1086 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1087 usb_autopm_put_interface(data
->intf
);
1091 static void btusb_stop_traffic(struct btusb_data
*data
)
1093 usb_kill_anchored_urbs(&data
->intr_anchor
);
1094 usb_kill_anchored_urbs(&data
->bulk_anchor
);
1095 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1096 usb_kill_anchored_urbs(&data
->diag_anchor
);
1099 static int btusb_close(struct hci_dev
*hdev
)
1101 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1104 BT_DBG("%s", hdev
->name
);
1106 cancel_work_sync(&data
->work
);
1107 cancel_work_sync(&data
->waker
);
1109 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1110 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1111 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1112 clear_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1114 btusb_stop_traffic(data
);
1115 btusb_free_frags(data
);
1117 err
= usb_autopm_get_interface(data
->intf
);
1121 data
->intf
->needs_remote_wakeup
= 0;
1122 usb_autopm_put_interface(data
->intf
);
1125 usb_scuttle_anchored_urbs(&data
->deferred
);
1129 static int btusb_flush(struct hci_dev
*hdev
)
1131 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1133 BT_DBG("%s", hdev
->name
);
1135 usb_kill_anchored_urbs(&data
->tx_anchor
);
1136 btusb_free_frags(data
);
1141 static struct urb
*alloc_ctrl_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1143 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1144 struct usb_ctrlrequest
*dr
;
1148 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1150 return ERR_PTR(-ENOMEM
);
1152 dr
= kmalloc(sizeof(*dr
), GFP_KERNEL
);
1155 return ERR_PTR(-ENOMEM
);
1158 dr
->bRequestType
= data
->cmdreq_type
;
1159 dr
->bRequest
= data
->cmdreq
;
1162 dr
->wLength
= __cpu_to_le16(skb
->len
);
1164 pipe
= usb_sndctrlpipe(data
->udev
, 0x00);
1166 usb_fill_control_urb(urb
, data
->udev
, pipe
, (void *)dr
,
1167 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1169 skb
->dev
= (void *)hdev
;
1174 static struct urb
*alloc_bulk_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1176 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1180 if (!data
->bulk_tx_ep
)
1181 return ERR_PTR(-ENODEV
);
1183 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1185 return ERR_PTR(-ENOMEM
);
1187 pipe
= usb_sndbulkpipe(data
->udev
, data
->bulk_tx_ep
->bEndpointAddress
);
1189 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
1190 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1192 skb
->dev
= (void *)hdev
;
1197 static struct urb
*alloc_isoc_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1199 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1203 if (!data
->isoc_tx_ep
)
1204 return ERR_PTR(-ENODEV
);
1206 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, GFP_KERNEL
);
1208 return ERR_PTR(-ENOMEM
);
1210 pipe
= usb_sndisocpipe(data
->udev
, data
->isoc_tx_ep
->bEndpointAddress
);
1212 usb_fill_int_urb(urb
, data
->udev
, pipe
,
1213 skb
->data
, skb
->len
, btusb_isoc_tx_complete
,
1214 skb
, data
->isoc_tx_ep
->bInterval
);
1216 urb
->transfer_flags
= URB_ISO_ASAP
;
1218 __fill_isoc_descriptor(urb
, skb
->len
,
1219 le16_to_cpu(data
->isoc_tx_ep
->wMaxPacketSize
));
1221 skb
->dev
= (void *)hdev
;
1226 static int submit_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1228 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1231 usb_anchor_urb(urb
, &data
->tx_anchor
);
1233 err
= usb_submit_urb(urb
, GFP_KERNEL
);
1235 if (err
!= -EPERM
&& err
!= -ENODEV
)
1236 BT_ERR("%s urb %p submission failed (%d)",
1237 hdev
->name
, urb
, -err
);
1238 kfree(urb
->setup_packet
);
1239 usb_unanchor_urb(urb
);
1241 usb_mark_last_busy(data
->udev
);
1248 static int submit_or_queue_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1250 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1251 unsigned long flags
;
1254 spin_lock_irqsave(&data
->txlock
, flags
);
1255 suspending
= test_bit(BTUSB_SUSPENDING
, &data
->flags
);
1257 data
->tx_in_flight
++;
1258 spin_unlock_irqrestore(&data
->txlock
, flags
);
1261 return submit_tx_urb(hdev
, urb
);
1263 usb_anchor_urb(urb
, &data
->deferred
);
1264 schedule_work(&data
->waker
);
1270 static int btusb_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1274 BT_DBG("%s", hdev
->name
);
1276 switch (hci_skb_pkt_type(skb
)) {
1277 case HCI_COMMAND_PKT
:
1278 urb
= alloc_ctrl_urb(hdev
, skb
);
1280 return PTR_ERR(urb
);
1282 hdev
->stat
.cmd_tx
++;
1283 return submit_or_queue_tx_urb(hdev
, urb
);
1285 case HCI_ACLDATA_PKT
:
1286 urb
= alloc_bulk_urb(hdev
, skb
);
1288 return PTR_ERR(urb
);
1290 hdev
->stat
.acl_tx
++;
1291 return submit_or_queue_tx_urb(hdev
, urb
);
1293 case HCI_SCODATA_PKT
:
1294 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1297 urb
= alloc_isoc_urb(hdev
, skb
);
1299 return PTR_ERR(urb
);
1301 hdev
->stat
.sco_tx
++;
1302 return submit_tx_urb(hdev
, urb
);
1308 static void btusb_notify(struct hci_dev
*hdev
, unsigned int evt
)
1310 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1312 BT_DBG("%s evt %d", hdev
->name
, evt
);
1314 if (hci_conn_num(hdev
, SCO_LINK
) != data
->sco_num
) {
1315 data
->sco_num
= hci_conn_num(hdev
, SCO_LINK
);
1316 schedule_work(&data
->work
);
1320 static inline int __set_isoc_interface(struct hci_dev
*hdev
, int altsetting
)
1322 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1323 struct usb_interface
*intf
= data
->isoc
;
1324 struct usb_endpoint_descriptor
*ep_desc
;
1330 err
= usb_set_interface(data
->udev
, 1, altsetting
);
1332 BT_ERR("%s setting interface failed (%d)", hdev
->name
, -err
);
1336 data
->isoc_altsetting
= altsetting
;
1338 data
->isoc_tx_ep
= NULL
;
1339 data
->isoc_rx_ep
= NULL
;
1341 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
1342 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
1344 if (!data
->isoc_tx_ep
&& usb_endpoint_is_isoc_out(ep_desc
)) {
1345 data
->isoc_tx_ep
= ep_desc
;
1349 if (!data
->isoc_rx_ep
&& usb_endpoint_is_isoc_in(ep_desc
)) {
1350 data
->isoc_rx_ep
= ep_desc
;
1355 if (!data
->isoc_tx_ep
|| !data
->isoc_rx_ep
) {
1356 BT_ERR("%s invalid SCO descriptors", hdev
->name
);
1363 static void btusb_work(struct work_struct
*work
)
1365 struct btusb_data
*data
= container_of(work
, struct btusb_data
, work
);
1366 struct hci_dev
*hdev
= data
->hdev
;
1370 if (data
->sco_num
> 0) {
1371 if (!test_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
)) {
1372 err
= usb_autopm_get_interface(data
->isoc
? data
->isoc
: data
->intf
);
1374 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1375 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1379 set_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
);
1382 if (hdev
->voice_setting
& 0x0020) {
1383 static const int alts
[3] = { 2, 4, 5 };
1385 new_alts
= alts
[data
->sco_num
- 1];
1387 new_alts
= data
->sco_num
;
1390 if (data
->isoc_altsetting
!= new_alts
) {
1391 unsigned long flags
;
1393 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1394 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1396 /* When isochronous alternate setting needs to be
1397 * changed, because SCO connection has been added
1398 * or removed, a packet fragment may be left in the
1399 * reassembling state. This could lead to wrongly
1400 * assembled fragments.
1402 * Clear outstanding fragment when selecting a new
1403 * alternate setting.
1405 spin_lock_irqsave(&data
->rxlock
, flags
);
1406 kfree_skb(data
->sco_skb
);
1407 data
->sco_skb
= NULL
;
1408 spin_unlock_irqrestore(&data
->rxlock
, flags
);
1410 if (__set_isoc_interface(hdev
, new_alts
) < 0)
1414 if (!test_and_set_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
1415 if (btusb_submit_isoc_urb(hdev
, GFP_KERNEL
) < 0)
1416 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1418 btusb_submit_isoc_urb(hdev
, GFP_KERNEL
);
1421 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1422 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1424 __set_isoc_interface(hdev
, 0);
1425 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
))
1426 usb_autopm_put_interface(data
->isoc
? data
->isoc
: data
->intf
);
1430 static void btusb_waker(struct work_struct
*work
)
1432 struct btusb_data
*data
= container_of(work
, struct btusb_data
, waker
);
1435 err
= usb_autopm_get_interface(data
->intf
);
1439 usb_autopm_put_interface(data
->intf
);
1442 static int btusb_setup_bcm92035(struct hci_dev
*hdev
)
1444 struct sk_buff
*skb
;
1447 BT_DBG("%s", hdev
->name
);
1449 skb
= __hci_cmd_sync(hdev
, 0xfc3b, 1, &val
, HCI_INIT_TIMEOUT
);
1451 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb
));
1458 static int btusb_setup_csr(struct hci_dev
*hdev
)
1460 struct hci_rp_read_local_version
*rp
;
1461 struct sk_buff
*skb
;
1463 BT_DBG("%s", hdev
->name
);
1465 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
,
1468 int err
= PTR_ERR(skb
);
1469 BT_ERR("%s: CSR: Local version failed (%d)", hdev
->name
, err
);
1473 if (skb
->len
!= sizeof(struct hci_rp_read_local_version
)) {
1474 BT_ERR("%s: CSR: Local version length mismatch", hdev
->name
);
1479 rp
= (struct hci_rp_read_local_version
*)skb
->data
;
1481 /* Detect controllers which aren't real CSR ones. */
1482 if (le16_to_cpu(rp
->manufacturer
) != 10 ||
1483 le16_to_cpu(rp
->lmp_subver
) == 0x0c5c) {
1484 /* Clear the reset quirk since this is not an actual
1485 * early Bluetooth 1.1 device from CSR.
1487 clear_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
1489 /* These fake CSR controllers have all a broken
1490 * stored link key handling and so just disable it.
1492 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
1500 static const struct firmware
*btusb_setup_intel_get_fw(struct hci_dev
*hdev
,
1501 struct intel_version
*ver
)
1503 const struct firmware
*fw
;
1507 snprintf(fwname
, sizeof(fwname
),
1508 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1509 ver
->hw_platform
, ver
->hw_variant
, ver
->hw_revision
,
1510 ver
->fw_variant
, ver
->fw_revision
, ver
->fw_build_num
,
1511 ver
->fw_build_ww
, ver
->fw_build_yy
);
1513 ret
= request_firmware(&fw
, fwname
, &hdev
->dev
);
1515 if (ret
== -EINVAL
) {
1516 BT_ERR("%s Intel firmware file request failed (%d)",
1521 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1522 hdev
->name
, fwname
, ret
);
1524 /* If the correct firmware patch file is not found, use the
1525 * default firmware patch file instead
1527 snprintf(fwname
, sizeof(fwname
), "intel/ibt-hw-%x.%x.bseq",
1528 ver
->hw_platform
, ver
->hw_variant
);
1529 if (request_firmware(&fw
, fwname
, &hdev
->dev
) < 0) {
1530 BT_ERR("%s failed to open default Intel fw file: %s",
1531 hdev
->name
, fwname
);
1536 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev
->name
, fwname
);
1541 static int btusb_setup_intel_patching(struct hci_dev
*hdev
,
1542 const struct firmware
*fw
,
1543 const u8
**fw_ptr
, int *disable_patch
)
1545 struct sk_buff
*skb
;
1546 struct hci_command_hdr
*cmd
;
1547 const u8
*cmd_param
;
1548 struct hci_event_hdr
*evt
= NULL
;
1549 const u8
*evt_param
= NULL
;
1550 int remain
= fw
->size
- (*fw_ptr
- fw
->data
);
1552 /* The first byte indicates the types of the patch command or event.
1553 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1554 * in the current firmware buffer doesn't start with 0x01 or
1555 * the size of remain buffer is smaller than HCI command header,
1556 * the firmware file is corrupted and it should stop the patching
1559 if (remain
> HCI_COMMAND_HDR_SIZE
&& *fw_ptr
[0] != 0x01) {
1560 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev
->name
);
1566 cmd
= (struct hci_command_hdr
*)(*fw_ptr
);
1567 *fw_ptr
+= sizeof(*cmd
);
1568 remain
-= sizeof(*cmd
);
1570 /* Ensure that the remain firmware data is long enough than the length
1571 * of command parameter. If not, the firmware file is corrupted.
1573 if (remain
< cmd
->plen
) {
1574 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev
->name
);
1578 /* If there is a command that loads a patch in the firmware
1579 * file, then enable the patch upon success, otherwise just
1580 * disable the manufacturer mode, for example patch activation
1581 * is not required when the default firmware patch file is used
1582 * because there are no patch data to load.
1584 if (*disable_patch
&& le16_to_cpu(cmd
->opcode
) == 0xfc8e)
1587 cmd_param
= *fw_ptr
;
1588 *fw_ptr
+= cmd
->plen
;
1589 remain
-= cmd
->plen
;
1591 /* This reads the expected events when the above command is sent to the
1592 * device. Some vendor commands expects more than one events, for
1593 * example command status event followed by vendor specific event.
1594 * For this case, it only keeps the last expected event. so the command
1595 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1596 * last expected event.
1598 while (remain
> HCI_EVENT_HDR_SIZE
&& *fw_ptr
[0] == 0x02) {
1602 evt
= (struct hci_event_hdr
*)(*fw_ptr
);
1603 *fw_ptr
+= sizeof(*evt
);
1604 remain
-= sizeof(*evt
);
1606 if (remain
< evt
->plen
) {
1607 BT_ERR("%s Intel fw corrupted: invalid evt len",
1612 evt_param
= *fw_ptr
;
1613 *fw_ptr
+= evt
->plen
;
1614 remain
-= evt
->plen
;
1617 /* Every HCI commands in the firmware file has its correspond event.
1618 * If event is not found or remain is smaller than zero, the firmware
1619 * file is corrupted.
1621 if (!evt
|| !evt_param
|| remain
< 0) {
1622 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev
->name
);
1626 skb
= __hci_cmd_sync_ev(hdev
, le16_to_cpu(cmd
->opcode
), cmd
->plen
,
1627 cmd_param
, evt
->evt
, HCI_INIT_TIMEOUT
);
1629 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1630 hdev
->name
, cmd
->opcode
, PTR_ERR(skb
));
1631 return PTR_ERR(skb
);
1634 /* It ensures that the returned event matches the event data read from
1635 * the firmware file. At fist, it checks the length and then
1636 * the contents of the event.
1638 if (skb
->len
!= evt
->plen
) {
1639 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev
->name
,
1640 le16_to_cpu(cmd
->opcode
));
1645 if (memcmp(skb
->data
, evt_param
, evt
->plen
)) {
1646 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1647 hdev
->name
, le16_to_cpu(cmd
->opcode
));
1656 static int btusb_setup_intel(struct hci_dev
*hdev
)
1658 struct sk_buff
*skb
;
1659 const struct firmware
*fw
;
1661 int disable_patch
, err
;
1662 struct intel_version ver
;
1664 BT_DBG("%s", hdev
->name
);
1666 /* The controller has a bug with the first HCI command sent to it
1667 * returning number of completed commands as zero. This would stall the
1668 * command processing in the Bluetooth core.
1670 * As a workaround, send HCI Reset command first which will reset the
1671 * number of completed commands and allow normal command processing
1674 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
1676 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1677 hdev
->name
, PTR_ERR(skb
));
1678 return PTR_ERR(skb
);
1682 /* Read Intel specific controller version first to allow selection of
1683 * which firmware file to load.
1685 * The returned information are hardware variant and revision plus
1686 * firmware variant, revision and build number.
1688 err
= btintel_read_version(hdev
, &ver
);
1692 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1693 hdev
->name
, ver
.hw_platform
, ver
.hw_variant
, ver
.hw_revision
,
1694 ver
.fw_variant
, ver
.fw_revision
, ver
.fw_build_num
,
1695 ver
.fw_build_ww
, ver
.fw_build_yy
, ver
.fw_patch_num
);
1697 /* fw_patch_num indicates the version of patch the device currently
1698 * have. If there is no patch data in the device, it is always 0x00.
1699 * So, if it is other than 0x00, no need to patch the device again.
1701 if (ver
.fw_patch_num
) {
1702 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1703 hdev
->name
, ver
.fw_patch_num
);
1707 /* Opens the firmware patch file based on the firmware version read
1708 * from the controller. If it fails to open the matching firmware
1709 * patch file, it tries to open the default firmware patch file.
1710 * If no patch file is found, allow the device to operate without
1713 fw
= btusb_setup_intel_get_fw(hdev
, &ver
);
1718 /* Enable the manufacturer mode of the controller.
1719 * Only while this mode is enabled, the driver can download the
1720 * firmware patch data and configuration parameters.
1722 err
= btintel_enter_mfg(hdev
);
1724 release_firmware(fw
);
1730 /* The firmware data file consists of list of Intel specific HCI
1731 * commands and its expected events. The first byte indicates the
1732 * type of the message, either HCI command or HCI event.
1734 * It reads the command and its expected event from the firmware file,
1735 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1736 * the returned event is compared with the event read from the firmware
1737 * file and it will continue until all the messages are downloaded to
1740 * Once the firmware patching is completed successfully,
1741 * the manufacturer mode is disabled with reset and activating the
1744 * If the firmware patching fails, the manufacturer mode is
1745 * disabled with reset and deactivating the patch.
1747 * If the default patch file is used, no reset is done when disabling
1750 while (fw
->size
> fw_ptr
- fw
->data
) {
1753 ret
= btusb_setup_intel_patching(hdev
, fw
, &fw_ptr
,
1756 goto exit_mfg_deactivate
;
1759 release_firmware(fw
);
1762 goto exit_mfg_disable
;
1764 /* Patching completed successfully and disable the manufacturer mode
1765 * with reset and activate the downloaded firmware patches.
1767 err
= btintel_exit_mfg(hdev
, true, true);
1771 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1777 /* Disable the manufacturer mode without reset */
1778 err
= btintel_exit_mfg(hdev
, false, false);
1782 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev
->name
);
1786 exit_mfg_deactivate
:
1787 release_firmware(fw
);
1789 /* Patching failed. Disable the manufacturer mode with reset and
1790 * deactivate the downloaded firmware patches.
1792 err
= btintel_exit_mfg(hdev
, true, false);
1796 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1800 /* Set the event mask for Intel specific vendor events. This enables
1801 * a few extra events that are useful during general operation.
1803 btintel_set_event_mask_mfg(hdev
, false);
1805 btintel_check_bdaddr(hdev
);
1809 static int inject_cmd_complete(struct hci_dev
*hdev
, __u16 opcode
)
1811 struct sk_buff
*skb
;
1812 struct hci_event_hdr
*hdr
;
1813 struct hci_ev_cmd_complete
*evt
;
1815 skb
= bt_skb_alloc(sizeof(*hdr
) + sizeof(*evt
) + 1, GFP_ATOMIC
);
1819 hdr
= (struct hci_event_hdr
*)skb_put(skb
, sizeof(*hdr
));
1820 hdr
->evt
= HCI_EV_CMD_COMPLETE
;
1821 hdr
->plen
= sizeof(*evt
) + 1;
1823 evt
= (struct hci_ev_cmd_complete
*)skb_put(skb
, sizeof(*evt
));
1825 evt
->opcode
= cpu_to_le16(opcode
);
1827 *skb_put(skb
, 1) = 0x00;
1829 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
1831 return hci_recv_frame(hdev
, skb
);
1834 static int btusb_recv_bulk_intel(struct btusb_data
*data
, void *buffer
,
1837 /* When the device is in bootloader mode, then it can send
1838 * events via the bulk endpoint. These events are treated the
1839 * same way as the ones received from the interrupt endpoint.
1841 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
))
1842 return btusb_recv_intr(data
, buffer
, count
);
1844 return btusb_recv_bulk(data
, buffer
, count
);
1847 static void btusb_intel_bootup(struct btusb_data
*data
, const void *ptr
,
1850 const struct intel_bootup
*evt
= ptr
;
1852 if (len
!= sizeof(*evt
))
1855 if (test_and_clear_bit(BTUSB_BOOTING
, &data
->flags
)) {
1856 smp_mb__after_atomic();
1857 wake_up_bit(&data
->flags
, BTUSB_BOOTING
);
1861 static void btusb_intel_secure_send_result(struct btusb_data
*data
,
1862 const void *ptr
, unsigned int len
)
1864 const struct intel_secure_send_result
*evt
= ptr
;
1866 if (len
!= sizeof(*evt
))
1870 set_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
);
1872 if (test_and_clear_bit(BTUSB_DOWNLOADING
, &data
->flags
) &&
1873 test_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
)) {
1874 smp_mb__after_atomic();
1875 wake_up_bit(&data
->flags
, BTUSB_DOWNLOADING
);
1879 static int btusb_recv_event_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1881 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1883 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1884 struct hci_event_hdr
*hdr
= (void *)skb
->data
;
1886 if (skb
->len
> HCI_EVENT_HDR_SIZE
&& hdr
->evt
== 0xff &&
1888 const void *ptr
= skb
->data
+ HCI_EVENT_HDR_SIZE
+ 1;
1889 unsigned int len
= skb
->len
- HCI_EVENT_HDR_SIZE
- 1;
1891 switch (skb
->data
[2]) {
1893 /* When switching to the operational firmware
1894 * the device sends a vendor specific event
1895 * indicating that the bootup completed.
1897 btusb_intel_bootup(data
, ptr
, len
);
1900 /* When the firmware loading completes the
1901 * device sends out a vendor specific event
1902 * indicating the result of the firmware
1905 btusb_intel_secure_send_result(data
, ptr
, len
);
1911 return hci_recv_frame(hdev
, skb
);
1914 static int btusb_send_frame_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1916 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1919 BT_DBG("%s", hdev
->name
);
1921 switch (hci_skb_pkt_type(skb
)) {
1922 case HCI_COMMAND_PKT
:
1923 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1924 struct hci_command_hdr
*cmd
= (void *)skb
->data
;
1925 __u16 opcode
= le16_to_cpu(cmd
->opcode
);
1927 /* When in bootloader mode and the command 0xfc09
1928 * is received, it needs to be send down the
1929 * bulk endpoint. So allocate a bulk URB instead.
1931 if (opcode
== 0xfc09)
1932 urb
= alloc_bulk_urb(hdev
, skb
);
1934 urb
= alloc_ctrl_urb(hdev
, skb
);
1936 /* When the 0xfc01 command is issued to boot into
1937 * the operational firmware, it will actually not
1938 * send a command complete event. To keep the flow
1939 * control working inject that event here.
1941 if (opcode
== 0xfc01)
1942 inject_cmd_complete(hdev
, opcode
);
1944 urb
= alloc_ctrl_urb(hdev
, skb
);
1947 return PTR_ERR(urb
);
1949 hdev
->stat
.cmd_tx
++;
1950 return submit_or_queue_tx_urb(hdev
, urb
);
1952 case HCI_ACLDATA_PKT
:
1953 urb
= alloc_bulk_urb(hdev
, skb
);
1955 return PTR_ERR(urb
);
1957 hdev
->stat
.acl_tx
++;
1958 return submit_or_queue_tx_urb(hdev
, urb
);
1960 case HCI_SCODATA_PKT
:
1961 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1964 urb
= alloc_isoc_urb(hdev
, skb
);
1966 return PTR_ERR(urb
);
1968 hdev
->stat
.sco_tx
++;
1969 return submit_tx_urb(hdev
, urb
);
1975 static int btusb_setup_intel_new(struct hci_dev
*hdev
)
1977 static const u8 reset_param
[] = { 0x00, 0x01, 0x00, 0x01,
1978 0x00, 0x08, 0x04, 0x00 };
1979 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1980 struct sk_buff
*skb
;
1981 struct intel_version ver
;
1982 struct intel_boot_params
*params
;
1983 const struct firmware
*fw
;
1987 ktime_t calltime
, delta
, rettime
;
1988 unsigned long long duration
;
1991 BT_DBG("%s", hdev
->name
);
1993 calltime
= ktime_get();
1995 /* Read the Intel version information to determine if the device
1996 * is in bootloader mode or if it already has operational firmware
1999 err
= btintel_read_version(hdev
, &ver
);
2003 /* The hardware platform number has a fixed value of 0x37 and
2004 * for now only accept this single value.
2006 if (ver
.hw_platform
!= 0x37) {
2007 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2008 hdev
->name
, ver
.hw_platform
);
2012 /* At the moment the iBT 3.0 hardware variants 0x0b (LnP/SfP)
2013 * and 0x0c (WsP) are supported by this firmware loading method.
2015 * This check has been put in place to ensure correct forward
2016 * compatibility options when newer hardware variants come along.
2018 if (ver
.hw_variant
!= 0x0b && ver
.hw_variant
!= 0x0c) {
2019 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2020 hdev
->name
, ver
.hw_variant
);
2024 btintel_version_info(hdev
, &ver
);
2026 /* The firmware variant determines if the device is in bootloader
2027 * mode or is running operational firmware. The value 0x06 identifies
2028 * the bootloader and the value 0x23 identifies the operational
2031 * When the operational firmware is already present, then only
2032 * the check for valid Bluetooth device address is needed. This
2033 * determines if the device will be added as configured or
2034 * unconfigured controller.
2036 * It is not possible to use the Secure Boot Parameters in this
2037 * case since that command is only available in bootloader mode.
2039 if (ver
.fw_variant
== 0x23) {
2040 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2041 btintel_check_bdaddr(hdev
);
2045 /* If the device is not in bootloader mode, then the only possible
2046 * choice is to return an error and abort the device initialization.
2048 if (ver
.fw_variant
!= 0x06) {
2049 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2050 hdev
->name
, ver
.fw_variant
);
2054 /* Read the secure boot parameters to identify the operating
2055 * details of the bootloader.
2057 skb
= __hci_cmd_sync(hdev
, 0xfc0d, 0, NULL
, HCI_INIT_TIMEOUT
);
2059 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2060 hdev
->name
, PTR_ERR(skb
));
2061 return PTR_ERR(skb
);
2064 if (skb
->len
!= sizeof(*params
)) {
2065 BT_ERR("%s: Intel boot parameters size mismatch", hdev
->name
);
2070 params
= (struct intel_boot_params
*)skb
->data
;
2072 BT_INFO("%s: Device revision is %u", hdev
->name
,
2073 le16_to_cpu(params
->dev_revid
));
2075 BT_INFO("%s: Secure boot is %s", hdev
->name
,
2076 params
->secure_boot
? "enabled" : "disabled");
2078 BT_INFO("%s: OTP lock is %s", hdev
->name
,
2079 params
->otp_lock
? "enabled" : "disabled");
2081 BT_INFO("%s: API lock is %s", hdev
->name
,
2082 params
->api_lock
? "enabled" : "disabled");
2084 BT_INFO("%s: Debug lock is %s", hdev
->name
,
2085 params
->debug_lock
? "enabled" : "disabled");
2087 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev
->name
,
2088 params
->min_fw_build_nn
, params
->min_fw_build_cw
,
2089 2000 + params
->min_fw_build_yy
);
2091 /* It is required that every single firmware fragment is acknowledged
2092 * with a command complete event. If the boot parameters indicate
2093 * that this bootloader does not send them, then abort the setup.
2095 if (params
->limited_cce
!= 0x00) {
2096 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2097 hdev
->name
, params
->limited_cce
);
2102 /* If the OTP has no valid Bluetooth device address, then there will
2103 * also be no valid address for the operational firmware.
2105 if (!bacmp(¶ms
->otp_bdaddr
, BDADDR_ANY
)) {
2106 BT_INFO("%s: No device address configured", hdev
->name
);
2107 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2110 /* With this Intel bootloader only the hardware variant and device
2111 * revision information are used to select the right firmware.
2113 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2115 * Currently the supported hardware variants are:
2116 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2117 * 12 (0x0c) for iBT3.5 (WsP)
2119 snprintf(fwname
, sizeof(fwname
), "intel/ibt-%u-%u.sfi",
2120 le16_to_cpu(ver
.hw_variant
),
2121 le16_to_cpu(params
->dev_revid
));
2123 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2125 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2131 BT_INFO("%s: Found device firmware: %s", hdev
->name
, fwname
);
2133 /* Save the DDC file name for later use to apply once the firmware
2134 * downloading is done.
2136 snprintf(fwname
, sizeof(fwname
), "intel/ibt-%u-%u.ddc",
2137 le16_to_cpu(ver
.hw_variant
),
2138 le16_to_cpu(params
->dev_revid
));
2142 if (fw
->size
< 644) {
2143 BT_ERR("%s: Invalid size of firmware file (%zu)",
2144 hdev
->name
, fw
->size
);
2149 set_bit(BTUSB_DOWNLOADING
, &data
->flags
);
2151 /* Start the firmware download transaction with the Init fragment
2152 * represented by the 128 bytes of CSS header.
2154 err
= btintel_secure_send(hdev
, 0x00, 128, fw
->data
);
2156 BT_ERR("%s: Failed to send firmware header (%d)",
2161 /* Send the 256 bytes of public key information from the firmware
2162 * as the PKey fragment.
2164 err
= btintel_secure_send(hdev
, 0x03, 256, fw
->data
+ 128);
2166 BT_ERR("%s: Failed to send firmware public key (%d)",
2171 /* Send the 256 bytes of signature information from the firmware
2172 * as the Sign fragment.
2174 err
= btintel_secure_send(hdev
, 0x02, 256, fw
->data
+ 388);
2176 BT_ERR("%s: Failed to send firmware signature (%d)",
2181 fw_ptr
= fw
->data
+ 644;
2184 while (fw_ptr
- fw
->data
< fw
->size
) {
2185 struct hci_command_hdr
*cmd
= (void *)(fw_ptr
+ frag_len
);
2187 frag_len
+= sizeof(*cmd
) + cmd
->plen
;
2189 /* The parameter length of the secure send command requires
2190 * a 4 byte alignment. It happens so that the firmware file
2191 * contains proper Intel_NOP commands to align the fragments
2194 * Send set of commands with 4 byte alignment from the
2195 * firmware data buffer as a single Data fragement.
2197 if (!(frag_len
% 4)) {
2198 err
= btintel_secure_send(hdev
, 0x01, frag_len
, fw_ptr
);
2200 BT_ERR("%s: Failed to send firmware data (%d)",
2210 set_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
);
2212 BT_INFO("%s: Waiting for firmware download to complete", hdev
->name
);
2214 /* Before switching the device into operational mode and with that
2215 * booting the loaded firmware, wait for the bootloader notification
2216 * that all fragments have been successfully received.
2218 * When the event processing receives the notification, then the
2219 * BTUSB_DOWNLOADING flag will be cleared.
2221 * The firmware loading should not take longer than 5 seconds
2222 * and thus just timeout if that happens and fail the setup
2225 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_DOWNLOADING
,
2227 msecs_to_jiffies(5000));
2228 if (err
== -EINTR
) {
2229 BT_ERR("%s: Firmware loading interrupted", hdev
->name
);
2234 BT_ERR("%s: Firmware loading timeout", hdev
->name
);
2239 if (test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
)) {
2240 BT_ERR("%s: Firmware loading failed", hdev
->name
);
2245 rettime
= ktime_get();
2246 delta
= ktime_sub(rettime
, calltime
);
2247 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2249 BT_INFO("%s: Firmware loaded in %llu usecs", hdev
->name
, duration
);
2252 release_firmware(fw
);
2257 calltime
= ktime_get();
2259 set_bit(BTUSB_BOOTING
, &data
->flags
);
2261 skb
= __hci_cmd_sync(hdev
, 0xfc01, sizeof(reset_param
), reset_param
,
2264 return PTR_ERR(skb
);
2268 /* The bootloader will not indicate when the device is ready. This
2269 * is done by the operational firmware sending bootup notification.
2271 * Booting into operational firmware should not take longer than
2272 * 1 second. However if that happens, then just fail the setup
2273 * since something went wrong.
2275 BT_INFO("%s: Waiting for device to boot", hdev
->name
);
2277 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_BOOTING
,
2279 msecs_to_jiffies(1000));
2281 if (err
== -EINTR
) {
2282 BT_ERR("%s: Device boot interrupted", hdev
->name
);
2287 BT_ERR("%s: Device boot timeout", hdev
->name
);
2291 rettime
= ktime_get();
2292 delta
= ktime_sub(rettime
, calltime
);
2293 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2295 BT_INFO("%s: Device booted in %llu usecs", hdev
->name
, duration
);
2297 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2299 /* Once the device is running in operational mode, it needs to apply
2300 * the device configuration (DDC) parameters.
2302 * The device can work without DDC parameters, so even if it fails
2303 * to load the file, no need to fail the setup.
2305 btintel_load_ddc_config(hdev
, fwname
);
2307 /* Set the event mask for Intel specific vendor events. This enables
2308 * a few extra events that are useful during general operation. It
2309 * does not enable any debugging related events.
2311 * The device will function correctly without these events enabled
2312 * and thus no need to fail the setup.
2314 btintel_set_event_mask(hdev
, false);
2319 static int btusb_shutdown_intel(struct hci_dev
*hdev
)
2321 struct sk_buff
*skb
;
2324 /* Some platforms have an issue with BT LED when the interface is
2325 * down or BT radio is turned off, which takes 5 seconds to BT LED
2326 * goes off. This command turns off the BT LED immediately.
2328 skb
= __hci_cmd_sync(hdev
, 0xfc3f, 0, NULL
, HCI_INIT_TIMEOUT
);
2331 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2340 static int btusb_set_bdaddr_marvell(struct hci_dev
*hdev
,
2341 const bdaddr_t
*bdaddr
)
2343 struct sk_buff
*skb
;
2348 buf
[1] = sizeof(bdaddr_t
);
2349 memcpy(buf
+ 2, bdaddr
, sizeof(bdaddr_t
));
2351 skb
= __hci_cmd_sync(hdev
, 0xfc22, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2354 BT_ERR("%s: changing Marvell device address failed (%ld)",
2363 static int btusb_set_bdaddr_ath3012(struct hci_dev
*hdev
,
2364 const bdaddr_t
*bdaddr
)
2366 struct sk_buff
*skb
;
2373 buf
[3] = sizeof(bdaddr_t
);
2374 memcpy(buf
+ 4, bdaddr
, sizeof(bdaddr_t
));
2376 skb
= __hci_cmd_sync(hdev
, 0xfc0b, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2379 BT_ERR("%s: Change address command failed (%ld)",
2388 #define QCA_DFU_PACKET_LEN 4096
2390 #define QCA_GET_TARGET_VERSION 0x09
2391 #define QCA_CHECK_STATUS 0x05
2392 #define QCA_DFU_DOWNLOAD 0x01
2394 #define QCA_SYSCFG_UPDATED 0x40
2395 #define QCA_PATCH_UPDATED 0x80
2396 #define QCA_DFU_TIMEOUT 3000
2398 struct qca_version
{
2400 __le32 patch_version
;
2406 struct qca_rampatch_version
{
2408 __le16 patch_version
;
2411 struct qca_device_info
{
2413 u8 rampatch_hdr
; /* length of header in rampatch */
2414 u8 nvm_hdr
; /* length of header in NVM */
2415 u8 ver_offset
; /* offset of version structure in rampatch */
2418 static const struct qca_device_info qca_devices_table
[] = {
2419 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2420 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2421 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2422 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2423 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2424 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2427 static int btusb_qca_send_vendor_req(struct hci_dev
*hdev
, u8 request
,
2428 void *data
, u16 size
)
2430 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2431 struct usb_device
*udev
= btdata
->udev
;
2435 buf
= kmalloc(size
, GFP_KERNEL
);
2439 /* Found some of USB hosts have IOT issues with ours so that we should
2440 * not wait until HCI layer is ready.
2442 pipe
= usb_rcvctrlpipe(udev
, 0);
2443 err
= usb_control_msg(udev
, pipe
, request
, USB_TYPE_VENDOR
| USB_DIR_IN
,
2444 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2446 BT_ERR("%s: Failed to access otp area (%d)", hdev
->name
, err
);
2450 memcpy(data
, buf
, size
);
2458 static int btusb_setup_qca_download_fw(struct hci_dev
*hdev
,
2459 const struct firmware
*firmware
,
2462 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2463 struct usb_device
*udev
= btdata
->udev
;
2464 size_t count
, size
, sent
= 0;
2468 buf
= kmalloc(QCA_DFU_PACKET_LEN
, GFP_KERNEL
);
2472 count
= firmware
->size
;
2474 size
= min_t(size_t, count
, hdr_size
);
2475 memcpy(buf
, firmware
->data
, size
);
2477 /* USB patches should go down to controller through USB path
2478 * because binary format fits to go down through USB channel.
2479 * USB control path is for patching headers and USB bulk is for
2482 pipe
= usb_sndctrlpipe(udev
, 0);
2483 err
= usb_control_msg(udev
, pipe
, QCA_DFU_DOWNLOAD
, USB_TYPE_VENDOR
,
2484 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2486 BT_ERR("%s: Failed to send headers (%d)", hdev
->name
, err
);
2494 size
= min_t(size_t, count
, QCA_DFU_PACKET_LEN
);
2496 memcpy(buf
, firmware
->data
+ sent
, size
);
2498 pipe
= usb_sndbulkpipe(udev
, 0x02);
2499 err
= usb_bulk_msg(udev
, pipe
, buf
, size
, &len
,
2502 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2503 hdev
->name
, sent
, firmware
->size
, err
);
2508 BT_ERR("%s: Failed to get bulk buffer", hdev
->name
);
2522 static int btusb_setup_qca_load_rampatch(struct hci_dev
*hdev
,
2523 struct qca_version
*ver
,
2524 const struct qca_device_info
*info
)
2526 struct qca_rampatch_version
*rver
;
2527 const struct firmware
*fw
;
2528 u32 ver_rom
, ver_patch
;
2529 u16 rver_rom
, rver_patch
;
2533 ver_rom
= le32_to_cpu(ver
->rom_version
);
2534 ver_patch
= le32_to_cpu(ver
->patch_version
);
2536 snprintf(fwname
, sizeof(fwname
), "qca/rampatch_usb_%08x.bin", ver_rom
);
2538 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2540 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2541 hdev
->name
, fwname
, err
);
2545 BT_INFO("%s: using rampatch file: %s", hdev
->name
, fwname
);
2547 rver
= (struct qca_rampatch_version
*)(fw
->data
+ info
->ver_offset
);
2548 rver_rom
= le16_to_cpu(rver
->rom_version
);
2549 rver_patch
= le16_to_cpu(rver
->patch_version
);
2551 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2552 "build 0x%x", hdev
->name
, rver_rom
, rver_patch
, ver_rom
,
2555 if (rver_rom
!= ver_rom
|| rver_patch
<= ver_patch
) {
2556 BT_ERR("%s: rampatch file version did not match with firmware",
2562 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->rampatch_hdr
);
2565 release_firmware(fw
);
2570 static int btusb_setup_qca_load_nvm(struct hci_dev
*hdev
,
2571 struct qca_version
*ver
,
2572 const struct qca_device_info
*info
)
2574 const struct firmware
*fw
;
2578 snprintf(fwname
, sizeof(fwname
), "qca/nvm_usb_%08x.bin",
2579 le32_to_cpu(ver
->rom_version
));
2581 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2583 BT_ERR("%s: failed to request NVM file: %s (%d)",
2584 hdev
->name
, fwname
, err
);
2588 BT_INFO("%s: using NVM file: %s", hdev
->name
, fwname
);
2590 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->nvm_hdr
);
2592 release_firmware(fw
);
2597 static int btusb_setup_qca(struct hci_dev
*hdev
)
2599 const struct qca_device_info
*info
= NULL
;
2600 struct qca_version ver
;
2605 err
= btusb_qca_send_vendor_req(hdev
, QCA_GET_TARGET_VERSION
, &ver
,
2610 ver_rom
= le32_to_cpu(ver
.rom_version
);
2611 for (i
= 0; i
< ARRAY_SIZE(qca_devices_table
); i
++) {
2612 if (ver_rom
== qca_devices_table
[i
].rom_version
)
2613 info
= &qca_devices_table
[i
];
2616 BT_ERR("%s: don't support firmware rome 0x%x", hdev
->name
,
2621 err
= btusb_qca_send_vendor_req(hdev
, QCA_CHECK_STATUS
, &status
,
2626 if (!(status
& QCA_PATCH_UPDATED
)) {
2627 err
= btusb_setup_qca_load_rampatch(hdev
, &ver
, info
);
2632 if (!(status
& QCA_SYSCFG_UPDATED
)) {
2633 err
= btusb_setup_qca_load_nvm(hdev
, &ver
, info
);
2641 #ifdef CONFIG_BT_HCIBTUSB_BCM
2642 static inline int __set_diag_interface(struct hci_dev
*hdev
)
2644 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2645 struct usb_interface
*intf
= data
->diag
;
2651 data
->diag_tx_ep
= NULL
;
2652 data
->diag_rx_ep
= NULL
;
2654 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2655 struct usb_endpoint_descriptor
*ep_desc
;
2657 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2659 if (!data
->diag_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2660 data
->diag_tx_ep
= ep_desc
;
2664 if (!data
->diag_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2665 data
->diag_rx_ep
= ep_desc
;
2670 if (!data
->diag_tx_ep
|| !data
->diag_rx_ep
) {
2671 BT_ERR("%s invalid diagnostic descriptors", hdev
->name
);
2678 static struct urb
*alloc_diag_urb(struct hci_dev
*hdev
, bool enable
)
2680 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2681 struct sk_buff
*skb
;
2685 if (!data
->diag_tx_ep
)
2686 return ERR_PTR(-ENODEV
);
2688 urb
= usb_alloc_urb(0, GFP_KERNEL
);
2690 return ERR_PTR(-ENOMEM
);
2692 skb
= bt_skb_alloc(2, GFP_KERNEL
);
2695 return ERR_PTR(-ENOMEM
);
2698 *skb_put(skb
, 1) = 0xf0;
2699 *skb_put(skb
, 1) = enable
;
2701 pipe
= usb_sndbulkpipe(data
->udev
, data
->diag_tx_ep
->bEndpointAddress
);
2703 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
2704 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
2706 skb
->dev
= (void *)hdev
;
2711 static int btusb_bcm_set_diag(struct hci_dev
*hdev
, bool enable
)
2713 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2719 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
2722 urb
= alloc_diag_urb(hdev
, enable
);
2724 return PTR_ERR(urb
);
2726 return submit_or_queue_tx_urb(hdev
, urb
);
2730 static int btusb_probe(struct usb_interface
*intf
,
2731 const struct usb_device_id
*id
)
2733 struct usb_endpoint_descriptor
*ep_desc
;
2734 struct btusb_data
*data
;
2735 struct hci_dev
*hdev
;
2736 unsigned ifnum_base
;
2739 BT_DBG("intf %p id %p", intf
, id
);
2741 /* interface numbers are hardcoded in the spec */
2742 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 0) {
2743 if (!(id
->driver_info
& BTUSB_IFNUM_2
))
2745 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 2)
2749 ifnum_base
= intf
->cur_altsetting
->desc
.bInterfaceNumber
;
2751 if (!id
->driver_info
) {
2752 const struct usb_device_id
*match
;
2754 match
= usb_match_id(intf
, blacklist_table
);
2759 if (id
->driver_info
== BTUSB_IGNORE
)
2762 if (id
->driver_info
& BTUSB_ATH3012
) {
2763 struct usb_device
*udev
= interface_to_usbdev(intf
);
2765 /* Old firmware would otherwise let ath3k driver load
2766 * patch and sysconfig files */
2767 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) <= 0x0001)
2771 data
= devm_kzalloc(&intf
->dev
, sizeof(*data
), GFP_KERNEL
);
2775 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2776 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2778 if (!data
->intr_ep
&& usb_endpoint_is_int_in(ep_desc
)) {
2779 data
->intr_ep
= ep_desc
;
2783 if (!data
->bulk_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2784 data
->bulk_tx_ep
= ep_desc
;
2788 if (!data
->bulk_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2789 data
->bulk_rx_ep
= ep_desc
;
2794 if (!data
->intr_ep
|| !data
->bulk_tx_ep
|| !data
->bulk_rx_ep
)
2797 if (id
->driver_info
& BTUSB_AMP
) {
2798 data
->cmdreq_type
= USB_TYPE_CLASS
| 0x01;
2799 data
->cmdreq
= 0x2b;
2801 data
->cmdreq_type
= USB_TYPE_CLASS
;
2802 data
->cmdreq
= 0x00;
2805 data
->udev
= interface_to_usbdev(intf
);
2808 INIT_WORK(&data
->work
, btusb_work
);
2809 INIT_WORK(&data
->waker
, btusb_waker
);
2810 init_usb_anchor(&data
->deferred
);
2811 init_usb_anchor(&data
->tx_anchor
);
2812 spin_lock_init(&data
->txlock
);
2814 init_usb_anchor(&data
->intr_anchor
);
2815 init_usb_anchor(&data
->bulk_anchor
);
2816 init_usb_anchor(&data
->isoc_anchor
);
2817 init_usb_anchor(&data
->diag_anchor
);
2818 spin_lock_init(&data
->rxlock
);
2820 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2821 data
->recv_event
= btusb_recv_event_intel
;
2822 data
->recv_bulk
= btusb_recv_bulk_intel
;
2823 set_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2825 data
->recv_event
= hci_recv_frame
;
2826 data
->recv_bulk
= btusb_recv_bulk
;
2829 hdev
= hci_alloc_dev();
2833 hdev
->bus
= HCI_USB
;
2834 hci_set_drvdata(hdev
, data
);
2836 if (id
->driver_info
& BTUSB_AMP
)
2837 hdev
->dev_type
= HCI_AMP
;
2839 hdev
->dev_type
= HCI_PRIMARY
;
2843 SET_HCIDEV_DEV(hdev
, &intf
->dev
);
2845 hdev
->open
= btusb_open
;
2846 hdev
->close
= btusb_close
;
2847 hdev
->flush
= btusb_flush
;
2848 hdev
->send
= btusb_send_frame
;
2849 hdev
->notify
= btusb_notify
;
2851 if (id
->driver_info
& BTUSB_CW6622
)
2852 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
2854 if (id
->driver_info
& BTUSB_BCM2045
)
2855 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
2857 if (id
->driver_info
& BTUSB_BCM92035
)
2858 hdev
->setup
= btusb_setup_bcm92035
;
2860 #ifdef CONFIG_BT_HCIBTUSB_BCM
2861 if (id
->driver_info
& BTUSB_BCM_PATCHRAM
) {
2862 hdev
->manufacturer
= 15;
2863 hdev
->setup
= btbcm_setup_patchram
;
2864 hdev
->set_diag
= btusb_bcm_set_diag
;
2865 hdev
->set_bdaddr
= btbcm_set_bdaddr
;
2867 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2868 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2871 if (id
->driver_info
& BTUSB_BCM_APPLE
) {
2872 hdev
->manufacturer
= 15;
2873 hdev
->setup
= btbcm_setup_apple
;
2874 hdev
->set_diag
= btusb_bcm_set_diag
;
2876 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2877 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2881 if (id
->driver_info
& BTUSB_INTEL
) {
2882 hdev
->manufacturer
= 2;
2883 hdev
->setup
= btusb_setup_intel
;
2884 hdev
->shutdown
= btusb_shutdown_intel
;
2885 hdev
->set_diag
= btintel_set_diag_mfg
;
2886 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2887 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2888 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2889 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2892 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2893 hdev
->manufacturer
= 2;
2894 hdev
->send
= btusb_send_frame_intel
;
2895 hdev
->setup
= btusb_setup_intel_new
;
2896 hdev
->hw_error
= btintel_hw_error
;
2897 hdev
->set_diag
= btintel_set_diag
;
2898 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2899 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2900 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2903 if (id
->driver_info
& BTUSB_MARVELL
)
2904 hdev
->set_bdaddr
= btusb_set_bdaddr_marvell
;
2906 if (id
->driver_info
& BTUSB_SWAVE
) {
2907 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
);
2908 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
);
2911 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
2912 hdev
->manufacturer
= 2;
2913 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2916 if (id
->driver_info
& BTUSB_ATH3012
) {
2917 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2918 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2919 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2922 if (id
->driver_info
& BTUSB_QCA_ROME
) {
2923 data
->setup_on_usb
= btusb_setup_qca
;
2924 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2927 #ifdef CONFIG_BT_HCIBTUSB_RTL
2928 if (id
->driver_info
& BTUSB_REALTEK
) {
2929 hdev
->setup
= btrtl_setup_realtek
;
2931 /* Realtek devices lose their updated firmware over suspend,
2932 * but the USB hub doesn't notice any status change.
2933 * Explicitly request a device reset on resume.
2935 set_bit(BTUSB_RESET_RESUME
, &data
->flags
);
2939 if (id
->driver_info
& BTUSB_AMP
) {
2940 /* AMP controllers do not support SCO packets */
2943 /* Interface orders are hardcoded in the specification */
2944 data
->isoc
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 1);
2948 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2950 if (force_scofix
|| id
->driver_info
& BTUSB_WRONG_SCO_MTU
) {
2951 if (!disable_scofix
)
2952 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE
, &hdev
->quirks
);
2955 if (id
->driver_info
& BTUSB_BROKEN_ISOC
)
2958 if (id
->driver_info
& BTUSB_DIGIANSWER
) {
2959 data
->cmdreq_type
= USB_TYPE_VENDOR
;
2960 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2963 if (id
->driver_info
& BTUSB_CSR
) {
2964 struct usb_device
*udev
= data
->udev
;
2965 u16 bcdDevice
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
2967 /* Old firmware would otherwise execute USB reset */
2968 if (bcdDevice
< 0x117)
2969 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2971 /* Fake CSR devices with broken commands */
2972 if (bcdDevice
<= 0x100 || bcdDevice
== 0x134)
2973 hdev
->setup
= btusb_setup_csr
;
2975 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2978 if (id
->driver_info
& BTUSB_SNIFFER
) {
2979 struct usb_device
*udev
= data
->udev
;
2981 /* New sniffer firmware has crippled HCI interface */
2982 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) > 0x997)
2983 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2986 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
2987 /* A bug in the bootloader causes that interrupt interface is
2988 * only enabled after receiving SetInterface(0, AltSetting=0).
2990 err
= usb_set_interface(data
->udev
, 0, 0);
2992 BT_ERR("failed to set interface 0, alt 0 %d", err
);
2999 err
= usb_driver_claim_interface(&btusb_driver
,
3007 #ifdef CONFIG_BT_HCIBTUSB_BCM
3009 if (!usb_driver_claim_interface(&btusb_driver
,
3011 __set_diag_interface(hdev
);
3017 err
= hci_register_dev(hdev
);
3023 usb_set_intfdata(intf
, data
);
3028 static void btusb_disconnect(struct usb_interface
*intf
)
3030 struct btusb_data
*data
= usb_get_intfdata(intf
);
3031 struct hci_dev
*hdev
;
3033 BT_DBG("intf %p", intf
);
3039 usb_set_intfdata(data
->intf
, NULL
);
3042 usb_set_intfdata(data
->isoc
, NULL
);
3045 usb_set_intfdata(data
->diag
, NULL
);
3047 hci_unregister_dev(hdev
);
3049 if (intf
== data
->intf
) {
3051 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3053 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3054 } else if (intf
== data
->isoc
) {
3056 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3057 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3058 } else if (intf
== data
->diag
) {
3059 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3061 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3068 static int btusb_suspend(struct usb_interface
*intf
, pm_message_t message
)
3070 struct btusb_data
*data
= usb_get_intfdata(intf
);
3072 BT_DBG("intf %p", intf
);
3074 if (data
->suspend_count
++)
3077 spin_lock_irq(&data
->txlock
);
3078 if (!(PMSG_IS_AUTO(message
) && data
->tx_in_flight
)) {
3079 set_bit(BTUSB_SUSPENDING
, &data
->flags
);
3080 spin_unlock_irq(&data
->txlock
);
3082 spin_unlock_irq(&data
->txlock
);
3083 data
->suspend_count
--;
3087 cancel_work_sync(&data
->work
);
3089 btusb_stop_traffic(data
);
3090 usb_kill_anchored_urbs(&data
->tx_anchor
);
3092 /* Optionally request a device reset on resume, but only when
3093 * wakeups are disabled. If wakeups are enabled we assume the
3094 * device will stay powered up throughout suspend.
3096 if (test_bit(BTUSB_RESET_RESUME
, &data
->flags
) &&
3097 !device_may_wakeup(&data
->udev
->dev
))
3098 data
->udev
->reset_resume
= 1;
3103 static void play_deferred(struct btusb_data
*data
)
3108 while ((urb
= usb_get_from_anchor(&data
->deferred
))) {
3109 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
3113 data
->tx_in_flight
++;
3115 usb_scuttle_anchored_urbs(&data
->deferred
);
3118 static int btusb_resume(struct usb_interface
*intf
)
3120 struct btusb_data
*data
= usb_get_intfdata(intf
);
3121 struct hci_dev
*hdev
= data
->hdev
;
3124 BT_DBG("intf %p", intf
);
3126 if (--data
->suspend_count
)
3129 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
3132 if (test_bit(BTUSB_INTR_RUNNING
, &data
->flags
)) {
3133 err
= btusb_submit_intr_urb(hdev
, GFP_NOIO
);
3135 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
3140 if (test_bit(BTUSB_BULK_RUNNING
, &data
->flags
)) {
3141 err
= btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3143 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
3147 btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3150 if (test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
3151 if (btusb_submit_isoc_urb(hdev
, GFP_NOIO
) < 0)
3152 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
3154 btusb_submit_isoc_urb(hdev
, GFP_NOIO
);
3157 spin_lock_irq(&data
->txlock
);
3158 play_deferred(data
);
3159 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3160 spin_unlock_irq(&data
->txlock
);
3161 schedule_work(&data
->work
);
3166 usb_scuttle_anchored_urbs(&data
->deferred
);
3168 spin_lock_irq(&data
->txlock
);
3169 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3170 spin_unlock_irq(&data
->txlock
);
3176 static struct usb_driver btusb_driver
= {
3178 .probe
= btusb_probe
,
3179 .disconnect
= btusb_disconnect
,
3181 .suspend
= btusb_suspend
,
3182 .resume
= btusb_resume
,
3184 .id_table
= btusb_table
,
3185 .supports_autosuspend
= 1,
3186 .disable_hub_initiated_lpm
= 1,
3189 module_usb_driver(btusb_driver
);
3191 module_param(disable_scofix
, bool, 0644);
3192 MODULE_PARM_DESC(disable_scofix
, "Disable fixup of wrong SCO buffer size");
3194 module_param(force_scofix
, bool, 0644);
3195 MODULE_PARM_DESC(force_scofix
, "Force fixup of wrong SCO buffers size");
3197 module_param(reset
, bool, 0644);
3198 MODULE_PARM_DESC(reset
, "Send HCI reset command on initialization");
3200 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3201 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION
);
3202 MODULE_VERSION(VERSION
);
3203 MODULE_LICENSE("GPL");