crypto: atmel-sha - remove unnecessary static in atmel_sha_remove()
[linux-stable.git] / include / linux / ide.h
blobdc152e4b7f732ed294bde4f1f2e87fc2277d6262
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4 * linux/include/linux/ide.h
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/ata.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/pci.h>
18 #include <linux/completion.h>
19 #include <linux/pm.h>
20 #include <linux/mutex.h>
21 /* for request_sense */
22 #include <linux/cdrom.h>
23 #include <scsi/scsi_cmnd.h>
24 #include <asm/byteorder.h>
25 #include <asm/io.h>
27 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
28 # define SUPPORT_VLB_SYNC 0
29 #else
30 # define SUPPORT_VLB_SYNC 1
31 #endif
34 * Probably not wise to fiddle with these
36 #define IDE_DEFAULT_MAX_FAILURES 1
37 #define ERROR_MAX 8 /* Max read/write errors per sector */
38 #define ERROR_RESET 3 /* Reset controller every 4th retry */
39 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
41 struct device;
43 /* values for ide_request.type */
44 enum ata_priv_type {
45 ATA_PRIV_MISC,
46 ATA_PRIV_TASKFILE,
47 ATA_PRIV_PC,
48 ATA_PRIV_SENSE, /* sense request */
49 ATA_PRIV_PM_SUSPEND, /* suspend request */
50 ATA_PRIV_PM_RESUME, /* resume request */
53 struct ide_request {
54 struct scsi_request sreq;
55 u8 sense[SCSI_SENSE_BUFFERSIZE];
56 u8 type;
59 static inline struct ide_request *ide_req(struct request *rq)
61 return blk_mq_rq_to_pdu(rq);
64 static inline bool ata_misc_request(struct request *rq)
66 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_MISC;
69 static inline bool ata_taskfile_request(struct request *rq)
71 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_TASKFILE;
74 static inline bool ata_pc_request(struct request *rq)
76 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_PC;
79 static inline bool ata_sense_request(struct request *rq)
81 return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_SENSE;
84 static inline bool ata_pm_request(struct request *rq)
86 return blk_rq_is_private(rq) &&
87 (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND ||
88 ide_req(rq)->type == ATA_PRIV_PM_RESUME);
91 /* Error codes returned in result to the higher part of the driver. */
92 enum {
93 IDE_DRV_ERROR_GENERAL = 101,
94 IDE_DRV_ERROR_FILEMARK = 102,
95 IDE_DRV_ERROR_EOD = 103,
99 * Definitions for accessing IDE controller registers
101 #define IDE_NR_PORTS (10)
103 struct ide_io_ports {
104 unsigned long data_addr;
106 union {
107 unsigned long error_addr; /* read: error */
108 unsigned long feature_addr; /* write: feature */
111 unsigned long nsect_addr;
112 unsigned long lbal_addr;
113 unsigned long lbam_addr;
114 unsigned long lbah_addr;
116 unsigned long device_addr;
118 union {
119 unsigned long status_addr; /*  read: status  */
120 unsigned long command_addr; /* write: command */
123 unsigned long ctl_addr;
125 unsigned long irq_addr;
128 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
130 #define BAD_R_STAT (ATA_BUSY | ATA_ERR)
131 #define BAD_W_STAT (BAD_R_STAT | ATA_DF)
132 #define BAD_STAT (BAD_R_STAT | ATA_DRQ)
133 #define DRIVE_READY (ATA_DRDY | ATA_DSC)
135 #define BAD_CRC (ATA_ABORTED | ATA_ICRC)
137 #define SATA_NR_PORTS (3) /* 16 possible ?? */
139 #define SATA_STATUS_OFFSET (0)
140 #define SATA_ERROR_OFFSET (1)
141 #define SATA_CONTROL_OFFSET (2)
144 * Our Physical Region Descriptor (PRD) table should be large enough
145 * to handle the biggest I/O request we are likely to see. Since requests
146 * can have no more than 256 sectors, and since the typical blocksize is
147 * two or more sectors, we could get by with a limit of 128 entries here for
148 * the usual worst case. Most requests seem to include some contiguous blocks,
149 * further reducing the number of table entries required.
151 * The driver reverts to PIO mode for individual requests that exceed
152 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
153 * 100% of all crazy scenarios here is not necessary.
155 * As it turns out though, we must allocate a full 4KB page for this,
156 * so the two PRD tables (ide0 & ide1) will each get half of that,
157 * allowing each to have about 256 entries (8 bytes each) from this.
159 #define PRD_BYTES 8
160 #define PRD_ENTRIES 256
163 * Some more useful definitions
165 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
166 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
167 #define SECTOR_SIZE 512
170 * Timeouts for various operations:
172 enum {
173 /* spec allows up to 20ms, but CF cards and SSD drives need more */
174 WAIT_DRQ = 1 * HZ, /* 1s */
175 /* some laptops are very slow */
176 WAIT_READY = 5 * HZ, /* 5s */
177 /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
178 WAIT_PIDENTIFY = 10 * HZ, /* 10s */
179 /* worst case when spinning up */
180 WAIT_WORSTCASE = 30 * HZ, /* 30s */
181 /* maximum wait for an IRQ to happen */
182 WAIT_CMD = 10 * HZ, /* 10s */
183 /* Some drives require a longer IRQ timeout. */
184 WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */
186 * Some drives (for example, Seagate STT3401A Travan) require a very
187 * long timeout, because they don't return an interrupt or clear their
188 * BSY bit until after the command completes (even retension commands).
190 WAIT_TAPE_CMD = 900 * HZ, /* 900s */
191 /* minimum sleep time */
192 WAIT_MIN_SLEEP = HZ / 50, /* 20ms */
196 * Op codes for special requests to be handled by ide_special_rq().
197 * Values should be in the range of 0x20 to 0x3f.
199 #define REQ_DRIVE_RESET 0x20
200 #define REQ_DEVSET_EXEC 0x21
201 #define REQ_PARK_HEADS 0x22
202 #define REQ_UNPARK_HEADS 0x23
205 * hwif_chipset_t is used to keep track of the specific hardware
206 * chipset used by each IDE interface, if known.
208 enum { ide_unknown, ide_generic, ide_pci,
209 ide_cmd640, ide_dtc2278, ide_ali14xx,
210 ide_qd65xx, ide_umc8672, ide_ht6560b,
211 ide_4drives, ide_pmac, ide_acorn,
212 ide_au1xxx, ide_palm3710
215 typedef u8 hwif_chipset_t;
218 * Structure to hold all information about the location of this port
220 struct ide_hw {
221 union {
222 struct ide_io_ports io_ports;
223 unsigned long io_ports_array[IDE_NR_PORTS];
226 int irq; /* our irq number */
227 struct device *dev, *parent;
228 unsigned long config;
231 static inline void ide_std_init_ports(struct ide_hw *hw,
232 unsigned long io_addr,
233 unsigned long ctl_addr)
235 unsigned int i;
237 for (i = 0; i <= 7; i++)
238 hw->io_ports_array[i] = io_addr++;
240 hw->io_ports.ctl_addr = ctl_addr;
243 #define MAX_HWIFS 10
246 * Now for the data we need to maintain per-drive: ide_drive_t
249 #define ide_scsi 0x21
250 #define ide_disk 0x20
251 #define ide_optical 0x7
252 #define ide_cdrom 0x5
253 #define ide_tape 0x1
254 #define ide_floppy 0x0
257 * Special Driver Flags
259 enum {
260 IDE_SFLAG_SET_GEOMETRY = (1 << 0),
261 IDE_SFLAG_RECALIBRATE = (1 << 1),
262 IDE_SFLAG_SET_MULTMODE = (1 << 2),
266 * Status returned from various ide_ functions
268 typedef enum {
269 ide_stopped, /* no drive operation was started */
270 ide_started, /* a drive operation was started, handler was set */
271 } ide_startstop_t;
273 enum {
274 IDE_VALID_ERROR = (1 << 1),
275 IDE_VALID_FEATURE = IDE_VALID_ERROR,
276 IDE_VALID_NSECT = (1 << 2),
277 IDE_VALID_LBAL = (1 << 3),
278 IDE_VALID_LBAM = (1 << 4),
279 IDE_VALID_LBAH = (1 << 5),
280 IDE_VALID_DEVICE = (1 << 6),
281 IDE_VALID_LBA = IDE_VALID_LBAL |
282 IDE_VALID_LBAM |
283 IDE_VALID_LBAH,
284 IDE_VALID_OUT_TF = IDE_VALID_FEATURE |
285 IDE_VALID_NSECT |
286 IDE_VALID_LBA,
287 IDE_VALID_IN_TF = IDE_VALID_NSECT |
288 IDE_VALID_LBA,
289 IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF,
290 IDE_VALID_IN_HOB = IDE_VALID_ERROR |
291 IDE_VALID_NSECT |
292 IDE_VALID_LBA,
295 enum {
296 IDE_TFLAG_LBA48 = (1 << 0),
297 IDE_TFLAG_WRITE = (1 << 1),
298 IDE_TFLAG_CUSTOM_HANDLER = (1 << 2),
299 IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3),
300 /* force 16-bit I/O operations */
301 IDE_TFLAG_IO_16BIT = (1 << 4),
302 /* struct ide_cmd was allocated using kmalloc() */
303 IDE_TFLAG_DYN = (1 << 5),
304 IDE_TFLAG_FS = (1 << 6),
305 IDE_TFLAG_MULTI_PIO = (1 << 7),
306 IDE_TFLAG_SET_XFER = (1 << 8),
309 enum {
310 IDE_FTFLAG_FLAGGED = (1 << 0),
311 IDE_FTFLAG_SET_IN_FLAGS = (1 << 1),
312 IDE_FTFLAG_OUT_DATA = (1 << 2),
313 IDE_FTFLAG_IN_DATA = (1 << 3),
316 struct ide_taskfile {
317 u8 data; /* 0: data byte (for TASKFILE ioctl) */
318 union { /* 1: */
319 u8 error; /* read: error */
320 u8 feature; /* write: feature */
322 u8 nsect; /* 2: number of sectors */
323 u8 lbal; /* 3: LBA low */
324 u8 lbam; /* 4: LBA mid */
325 u8 lbah; /* 5: LBA high */
326 u8 device; /* 6: device select */
327 union { /* 7: */
328 u8 status; /* read: status */
329 u8 command; /* write: command */
333 struct ide_cmd {
334 struct ide_taskfile tf;
335 struct ide_taskfile hob;
336 struct {
337 struct {
338 u8 tf;
339 u8 hob;
340 } out, in;
341 } valid;
343 u16 tf_flags;
344 u8 ftf_flags; /* for TASKFILE ioctl */
345 int protocol;
347 int sg_nents; /* number of sg entries */
348 int orig_sg_nents;
349 int sg_dma_direction; /* DMA transfer direction */
351 unsigned int nbytes;
352 unsigned int nleft;
353 unsigned int last_xfer_len;
355 struct scatterlist *cursg;
356 unsigned int cursg_ofs;
358 struct request *rq; /* copy of request */
361 /* ATAPI packet command flags */
362 enum {
363 /* set when an error is considered normal - no retry (ide-tape) */
364 PC_FLAG_ABORT = (1 << 0),
365 PC_FLAG_SUPPRESS_ERROR = (1 << 1),
366 PC_FLAG_WAIT_FOR_DSC = (1 << 2),
367 PC_FLAG_DMA_OK = (1 << 3),
368 PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
369 PC_FLAG_DMA_ERROR = (1 << 5),
370 PC_FLAG_WRITING = (1 << 6),
373 #define ATAPI_WAIT_PC (60 * HZ)
375 struct ide_atapi_pc {
376 /* actual packet bytes */
377 u8 c[12];
378 /* incremented on each retry */
379 int retries;
380 int error;
382 /* bytes to transfer */
383 int req_xfer;
385 /* the corresponding request */
386 struct request *rq;
388 unsigned long flags;
391 * those are more or less driver-specific and some of them are subject
392 * to change/removal later.
394 unsigned long timeout;
397 struct ide_devset;
398 struct ide_driver;
400 #ifdef CONFIG_BLK_DEV_IDEACPI
401 struct ide_acpi_drive_link;
402 struct ide_acpi_hwif_link;
403 #endif
405 struct ide_drive_s;
407 struct ide_disk_ops {
408 int (*check)(struct ide_drive_s *, const char *);
409 int (*get_capacity)(struct ide_drive_s *);
410 void (*unlock_native_capacity)(struct ide_drive_s *);
411 void (*setup)(struct ide_drive_s *);
412 void (*flush)(struct ide_drive_s *);
413 int (*init_media)(struct ide_drive_s *, struct gendisk *);
414 int (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
415 int);
416 ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
417 sector_t);
418 int (*ioctl)(struct ide_drive_s *, struct block_device *,
419 fmode_t, unsigned int, unsigned long);
422 /* ATAPI device flags */
423 enum {
424 IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
426 /* ide-cd */
427 /* Drive cannot eject the disc. */
428 IDE_AFLAG_NO_EJECT = (1 << 1),
429 /* Drive is a pre ATAPI 1.2 drive. */
430 IDE_AFLAG_PRE_ATAPI12 = (1 << 2),
431 /* TOC addresses are in BCD. */
432 IDE_AFLAG_TOCADDR_AS_BCD = (1 << 3),
433 /* TOC track numbers are in BCD. */
434 IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 4),
435 /* Saved TOC information is current. */
436 IDE_AFLAG_TOC_VALID = (1 << 6),
437 /* We think that the drive door is locked. */
438 IDE_AFLAG_DOOR_LOCKED = (1 << 7),
439 /* SET_CD_SPEED command is unsupported. */
440 IDE_AFLAG_NO_SPEED_SELECT = (1 << 8),
441 IDE_AFLAG_VERTOS_300_SSD = (1 << 9),
442 IDE_AFLAG_VERTOS_600_ESD = (1 << 10),
443 IDE_AFLAG_SANYO_3CD = (1 << 11),
444 IDE_AFLAG_FULL_CAPS_PAGE = (1 << 12),
445 IDE_AFLAG_PLAY_AUDIO_OK = (1 << 13),
446 IDE_AFLAG_LE_SPEED_FIELDS = (1 << 14),
448 /* ide-floppy */
449 /* Avoid commands not supported in Clik drive */
450 IDE_AFLAG_CLIK_DRIVE = (1 << 15),
451 /* Requires BH algorithm for packets */
452 IDE_AFLAG_ZIP_DRIVE = (1 << 16),
453 /* Supports format progress report */
454 IDE_AFLAG_SRFP = (1 << 17),
456 /* ide-tape */
457 IDE_AFLAG_IGNORE_DSC = (1 << 18),
458 /* 0 When the tape position is unknown */
459 IDE_AFLAG_ADDRESS_VALID = (1 << 19),
460 /* Device already opened */
461 IDE_AFLAG_BUSY = (1 << 20),
462 /* Attempt to auto-detect the current user block size */
463 IDE_AFLAG_DETECT_BS = (1 << 21),
464 /* Currently on a filemark */
465 IDE_AFLAG_FILEMARK = (1 << 22),
466 /* 0 = no tape is loaded, so we don't rewind after ejecting */
467 IDE_AFLAG_MEDIUM_PRESENT = (1 << 23),
469 IDE_AFLAG_NO_AUTOCLOSE = (1 << 24),
472 /* device flags */
473 enum {
474 /* restore settings after device reset */
475 IDE_DFLAG_KEEP_SETTINGS = (1 << 0),
476 /* device is using DMA for read/write */
477 IDE_DFLAG_USING_DMA = (1 << 1),
478 /* okay to unmask other IRQs */
479 IDE_DFLAG_UNMASK = (1 << 2),
480 /* don't attempt flushes */
481 IDE_DFLAG_NOFLUSH = (1 << 3),
482 /* DSC overlap */
483 IDE_DFLAG_DSC_OVERLAP = (1 << 4),
484 /* give potential excess bandwidth */
485 IDE_DFLAG_NICE1 = (1 << 5),
486 /* device is physically present */
487 IDE_DFLAG_PRESENT = (1 << 6),
488 /* disable Host Protected Area */
489 IDE_DFLAG_NOHPA = (1 << 7),
490 /* id read from device (synthetic if not set) */
491 IDE_DFLAG_ID_READ = (1 << 8),
492 IDE_DFLAG_NOPROBE = (1 << 9),
493 /* need to do check_media_change() */
494 IDE_DFLAG_REMOVABLE = (1 << 10),
495 /* needed for removable devices */
496 IDE_DFLAG_ATTACH = (1 << 11),
497 IDE_DFLAG_FORCED_GEOM = (1 << 12),
498 /* disallow setting unmask bit */
499 IDE_DFLAG_NO_UNMASK = (1 << 13),
500 /* disallow enabling 32-bit I/O */
501 IDE_DFLAG_NO_IO_32BIT = (1 << 14),
502 /* for removable only: door lock/unlock works */
503 IDE_DFLAG_DOORLOCKING = (1 << 15),
504 /* disallow DMA */
505 IDE_DFLAG_NODMA = (1 << 16),
506 /* powermanagement told us not to do anything, so sleep nicely */
507 IDE_DFLAG_BLOCKED = (1 << 17),
508 /* sleeping & sleep field valid */
509 IDE_DFLAG_SLEEPING = (1 << 18),
510 IDE_DFLAG_POST_RESET = (1 << 19),
511 IDE_DFLAG_UDMA33_WARNED = (1 << 20),
512 IDE_DFLAG_LBA48 = (1 << 21),
513 /* status of write cache */
514 IDE_DFLAG_WCACHE = (1 << 22),
515 /* used for ignoring ATA_DF */
516 IDE_DFLAG_NOWERR = (1 << 23),
517 /* retrying in PIO */
518 IDE_DFLAG_DMA_PIO_RETRY = (1 << 24),
519 IDE_DFLAG_LBA = (1 << 25),
520 /* don't unload heads */
521 IDE_DFLAG_NO_UNLOAD = (1 << 26),
522 /* heads unloaded, please don't reset port */
523 IDE_DFLAG_PARKED = (1 << 27),
524 IDE_DFLAG_MEDIA_CHANGED = (1 << 28),
525 /* write protect */
526 IDE_DFLAG_WP = (1 << 29),
527 IDE_DFLAG_FORMAT_IN_PROGRESS = (1 << 30),
528 IDE_DFLAG_NIEN_QUIRK = (1 << 31),
531 struct ide_drive_s {
532 char name[4]; /* drive name, such as "hda" */
533 char driver_req[10]; /* requests specific driver */
535 struct request_queue *queue; /* request queue */
537 struct request *rq; /* current request */
538 void *driver_data; /* extra driver data */
539 u16 *id; /* identification info */
540 #ifdef CONFIG_IDE_PROC_FS
541 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
542 const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
543 #endif
544 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
546 const struct ide_disk_ops *disk_ops;
548 unsigned long dev_flags;
550 unsigned long sleep; /* sleep until this time */
551 unsigned long timeout; /* max time to wait for irq */
553 u8 special_flags; /* special action flags */
555 u8 select; /* basic drive/head select reg value */
556 u8 retry_pio; /* retrying dma capable host in pio */
557 u8 waiting_for_dma; /* dma currently in progress */
558 u8 dma; /* atapi dma flag */
560 u8 init_speed; /* transfer rate set at boot */
561 u8 current_speed; /* current transfer rate set */
562 u8 desired_speed; /* desired transfer rate set */
563 u8 pio_mode; /* for ->set_pio_mode _only_ */
564 u8 dma_mode; /* for ->set_dma_mode _only_ */
565 u8 dn; /* now wide spread use */
566 u8 acoustic; /* acoustic management */
567 u8 media; /* disk, cdrom, tape, floppy, ... */
568 u8 ready_stat; /* min status value for drive ready */
569 u8 mult_count; /* current multiple sector setting */
570 u8 mult_req; /* requested multiple sector setting */
571 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
572 u8 bad_wstat; /* used for ignoring ATA_DF */
573 u8 head; /* "real" number of heads */
574 u8 sect; /* "real" sectors per track */
575 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
576 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
578 /* delay this long before sending packet command */
579 u8 pc_delay;
581 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
582 unsigned int cyl; /* "real" number of cyls */
583 void *drive_data; /* used by set_pio_mode/dev_select() */
584 unsigned int failures; /* current failure count */
585 unsigned int max_failures; /* maximum allowed failure count */
586 u64 probed_capacity;/* initial/native media capacity */
587 u64 capacity64; /* total number of sectors */
589 int lun; /* logical unit */
590 int crc_count; /* crc counter to reduce drive speed */
592 unsigned long debug_mask; /* debugging levels switch */
594 #ifdef CONFIG_BLK_DEV_IDEACPI
595 struct ide_acpi_drive_link *acpidata;
596 #endif
597 struct list_head list;
598 struct device gendev;
599 struct completion gendev_rel_comp; /* to deal with device release() */
601 /* current packet command */
602 struct ide_atapi_pc *pc;
604 /* last failed packet command */
605 struct ide_atapi_pc *failed_pc;
607 /* callback for packet commands */
608 int (*pc_callback)(struct ide_drive_s *, int);
610 ide_startstop_t (*irq_handler)(struct ide_drive_s *);
612 unsigned long atapi_flags;
614 struct ide_atapi_pc request_sense_pc;
616 /* current sense rq and buffer */
617 bool sense_rq_armed;
618 struct request *sense_rq;
619 struct request_sense sense_data;
622 typedef struct ide_drive_s ide_drive_t;
624 #define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
626 #define to_ide_drv(obj, cont_type) \
627 container_of(obj, struct cont_type, dev)
629 #define ide_drv_g(disk, cont_type) \
630 container_of((disk)->private_data, struct cont_type, driver)
632 struct ide_port_info;
634 struct ide_tp_ops {
635 void (*exec_command)(struct hwif_s *, u8);
636 u8 (*read_status)(struct hwif_s *);
637 u8 (*read_altstatus)(struct hwif_s *);
638 void (*write_devctl)(struct hwif_s *, u8);
640 void (*dev_select)(ide_drive_t *);
641 void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
642 void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
644 void (*input_data)(ide_drive_t *, struct ide_cmd *,
645 void *, unsigned int);
646 void (*output_data)(ide_drive_t *, struct ide_cmd *,
647 void *, unsigned int);
650 extern const struct ide_tp_ops default_tp_ops;
653 * struct ide_port_ops - IDE port operations
655 * @init_dev: host specific initialization of a device
656 * @set_pio_mode: routine to program host for PIO mode
657 * @set_dma_mode: routine to program host for DMA mode
658 * @reset_poll: chipset polling based on hba specifics
659 * @pre_reset: chipset specific changes to default for device-hba resets
660 * @resetproc: routine to reset controller after a disk reset
661 * @maskproc: special host masking for drive selection
662 * @quirkproc: check host's drive quirk list
663 * @clear_irq: clear IRQ
665 * @mdma_filter: filter MDMA modes
666 * @udma_filter: filter UDMA modes
668 * @cable_detect: detect cable type
670 struct ide_port_ops {
671 void (*init_dev)(ide_drive_t *);
672 void (*set_pio_mode)(struct hwif_s *, ide_drive_t *);
673 void (*set_dma_mode)(struct hwif_s *, ide_drive_t *);
674 blk_status_t (*reset_poll)(ide_drive_t *);
675 void (*pre_reset)(ide_drive_t *);
676 void (*resetproc)(ide_drive_t *);
677 void (*maskproc)(ide_drive_t *, int);
678 void (*quirkproc)(ide_drive_t *);
679 void (*clear_irq)(ide_drive_t *);
680 int (*test_irq)(struct hwif_s *);
682 u8 (*mdma_filter)(ide_drive_t *);
683 u8 (*udma_filter)(ide_drive_t *);
685 u8 (*cable_detect)(struct hwif_s *);
688 struct ide_dma_ops {
689 void (*dma_host_set)(struct ide_drive_s *, int);
690 int (*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
691 void (*dma_start)(struct ide_drive_s *);
692 int (*dma_end)(struct ide_drive_s *);
693 int (*dma_test_irq)(struct ide_drive_s *);
694 void (*dma_lost_irq)(struct ide_drive_s *);
695 /* below ones are optional */
696 int (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
697 int (*dma_timer_expiry)(struct ide_drive_s *);
698 void (*dma_clear)(struct ide_drive_s *);
700 * The following method is optional and only required to be
701 * implemented for the SFF-8038i compatible controllers.
703 u8 (*dma_sff_read_status)(struct hwif_s *);
706 enum {
707 IDE_PFLAG_PROBING = (1 << 0),
710 struct ide_host;
712 typedef struct hwif_s {
713 struct hwif_s *mate; /* other hwif from same PCI chip */
714 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
716 struct ide_host *host;
718 char name[6]; /* name of interface, eg. "ide0" */
720 struct ide_io_ports io_ports;
722 unsigned long sata_scr[SATA_NR_PORTS];
724 ide_drive_t *devices[MAX_DRIVES + 1];
726 unsigned long port_flags;
728 u8 major; /* our major number */
729 u8 index; /* 0 for ide0; 1 for ide1; ... */
730 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
732 u32 host_flags;
734 u8 pio_mask;
736 u8 ultra_mask;
737 u8 mwdma_mask;
738 u8 swdma_mask;
740 u8 cbl; /* cable type */
742 hwif_chipset_t chipset; /* sub-module for tuning.. */
744 struct device *dev;
746 void (*rw_disk)(ide_drive_t *, struct request *);
748 const struct ide_tp_ops *tp_ops;
749 const struct ide_port_ops *port_ops;
750 const struct ide_dma_ops *dma_ops;
752 /* dma physical region descriptor table (cpu view) */
753 unsigned int *dmatable_cpu;
754 /* dma physical region descriptor table (dma view) */
755 dma_addr_t dmatable_dma;
757 /* maximum number of PRD table entries */
758 int prd_max_nents;
759 /* PRD entry size in bytes */
760 int prd_ent_size;
762 /* Scatter-gather list used to build the above */
763 struct scatterlist *sg_table;
764 int sg_max_nents; /* Maximum number of entries in it */
766 struct ide_cmd cmd; /* current command */
768 int rqsize; /* max sectors per request */
769 int irq; /* our irq number */
771 unsigned long dma_base; /* base addr for dma ports */
773 unsigned long config_data; /* for use by chipset-specific code */
774 unsigned long select_data; /* for use by chipset-specific code */
776 unsigned long extra_base; /* extra addr for dma ports */
777 unsigned extra_ports; /* number of extra dma ports */
779 unsigned present : 1; /* this interface exists */
780 unsigned busy : 1; /* serializes devices on a port */
782 struct device gendev;
783 struct device *portdev;
785 struct completion gendev_rel_comp; /* To deal with device release() */
787 void *hwif_data; /* extra hwif data */
789 #ifdef CONFIG_BLK_DEV_IDEACPI
790 struct ide_acpi_hwif_link *acpidata;
791 #endif
793 /* IRQ handler, if active */
794 ide_startstop_t (*handler)(ide_drive_t *);
796 /* BOOL: polling active & poll_timeout field valid */
797 unsigned int polling : 1;
799 /* current drive */
800 ide_drive_t *cur_dev;
802 /* current request */
803 struct request *rq;
805 /* failsafe timer */
806 struct timer_list timer;
807 /* timeout value during long polls */
808 unsigned long poll_timeout;
809 /* queried upon timeouts */
810 int (*expiry)(ide_drive_t *);
812 int req_gen;
813 int req_gen_timer;
815 spinlock_t lock;
816 } ____cacheline_internodealigned_in_smp ide_hwif_t;
818 #define MAX_HOST_PORTS 4
820 struct ide_host {
821 ide_hwif_t *ports[MAX_HOST_PORTS + 1];
822 unsigned int n_ports;
823 struct device *dev[2];
825 int (*init_chipset)(struct pci_dev *);
827 void (*get_lock)(irq_handler_t, void *);
828 void (*release_lock)(void);
830 irq_handler_t irq_handler;
832 unsigned long host_flags;
834 int irq_flags;
836 void *host_priv;
837 ide_hwif_t *cur_port; /* for hosts requiring serialization */
839 /* used for hosts requiring serialization */
840 volatile unsigned long host_busy;
843 #define IDE_HOST_BUSY 0
846 * internal ide interrupt handler type
848 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
849 typedef int (ide_expiry_t)(ide_drive_t *);
851 /* used by ide-cd, ide-floppy, etc. */
852 typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
854 extern struct mutex ide_setting_mtx;
857 * configurable drive settings
860 #define DS_SYNC (1 << 0)
862 struct ide_devset {
863 int (*get)(ide_drive_t *);
864 int (*set)(ide_drive_t *, int);
865 unsigned int flags;
868 #define __DEVSET(_flags, _get, _set) { \
869 .flags = _flags, \
870 .get = _get, \
871 .set = _set, \
874 #define ide_devset_get(name, field) \
875 static int get_##name(ide_drive_t *drive) \
877 return drive->field; \
880 #define ide_devset_set(name, field) \
881 static int set_##name(ide_drive_t *drive, int arg) \
883 drive->field = arg; \
884 return 0; \
887 #define ide_devset_get_flag(name, flag) \
888 static int get_##name(ide_drive_t *drive) \
890 return !!(drive->dev_flags & flag); \
893 #define ide_devset_set_flag(name, flag) \
894 static int set_##name(ide_drive_t *drive, int arg) \
896 if (arg) \
897 drive->dev_flags |= flag; \
898 else \
899 drive->dev_flags &= ~flag; \
900 return 0; \
903 #define __IDE_DEVSET(_name, _flags, _get, _set) \
904 const struct ide_devset ide_devset_##_name = \
905 __DEVSET(_flags, _get, _set)
907 #define IDE_DEVSET(_name, _flags, _get, _set) \
908 static __IDE_DEVSET(_name, _flags, _get, _set)
910 #define ide_devset_rw(_name, _func) \
911 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
913 #define ide_devset_w(_name, _func) \
914 IDE_DEVSET(_name, 0, NULL, set_##_func)
916 #define ide_ext_devset_rw(_name, _func) \
917 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
919 #define ide_ext_devset_rw_sync(_name, _func) \
920 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
922 #define ide_decl_devset(_name) \
923 extern const struct ide_devset ide_devset_##_name
925 ide_decl_devset(io_32bit);
926 ide_decl_devset(keepsettings);
927 ide_decl_devset(pio_mode);
928 ide_decl_devset(unmaskirq);
929 ide_decl_devset(using_dma);
931 #ifdef CONFIG_IDE_PROC_FS
933 * /proc/ide interface
936 #define ide_devset_rw_field(_name, _field) \
937 ide_devset_get(_name, _field); \
938 ide_devset_set(_name, _field); \
939 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
941 #define ide_devset_rw_flag(_name, _field) \
942 ide_devset_get_flag(_name, _field); \
943 ide_devset_set_flag(_name, _field); \
944 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
946 struct ide_proc_devset {
947 const char *name;
948 const struct ide_devset *setting;
949 int min, max;
950 int (*mulf)(ide_drive_t *);
951 int (*divf)(ide_drive_t *);
954 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
955 .name = __stringify(_name), \
956 .setting = &ide_devset_##_name, \
957 .min = _min, \
958 .max = _max, \
959 .mulf = _mulf, \
960 .divf = _divf, \
963 #define IDE_PROC_DEVSET(_name, _min, _max) \
964 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
966 typedef struct {
967 const char *name;
968 umode_t mode;
969 const struct file_operations *proc_fops;
970 } ide_proc_entry_t;
972 void proc_ide_create(void);
973 void proc_ide_destroy(void);
974 void ide_proc_register_port(ide_hwif_t *);
975 void ide_proc_port_register_devices(ide_hwif_t *);
976 void ide_proc_unregister_device(ide_drive_t *);
977 void ide_proc_unregister_port(ide_hwif_t *);
978 void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
979 void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
981 extern const struct file_operations ide_capacity_proc_fops;
982 extern const struct file_operations ide_geometry_proc_fops;
983 #else
984 static inline void proc_ide_create(void) { ; }
985 static inline void proc_ide_destroy(void) { ; }
986 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
987 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
988 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
989 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
990 static inline void ide_proc_register_driver(ide_drive_t *drive,
991 struct ide_driver *driver) { ; }
992 static inline void ide_proc_unregister_driver(ide_drive_t *drive,
993 struct ide_driver *driver) { ; }
994 #endif
996 enum {
997 /* enter/exit functions */
998 IDE_DBG_FUNC = (1 << 0),
999 /* sense key/asc handling */
1000 IDE_DBG_SENSE = (1 << 1),
1001 /* packet commands handling */
1002 IDE_DBG_PC = (1 << 2),
1003 /* request handling */
1004 IDE_DBG_RQ = (1 << 3),
1005 /* driver probing/setup */
1006 IDE_DBG_PROBE = (1 << 4),
1009 /* DRV_NAME has to be defined in the driver before using the macro below */
1010 #define __ide_debug_log(lvl, fmt, args...) \
1012 if (unlikely(drive->debug_mask & lvl)) \
1013 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \
1014 __func__, ## args); \
1018 * Power Management state machine (rq->pm->pm_step).
1020 * For each step, the core calls ide_start_power_step() first.
1021 * This can return:
1022 * - ide_stopped : In this case, the core calls us back again unless
1023 * step have been set to ide_power_state_completed.
1024 * - ide_started : In this case, the channel is left busy until an
1025 * async event (interrupt) occurs.
1026 * Typically, ide_start_power_step() will issue a taskfile request with
1027 * do_rw_taskfile().
1029 * Upon reception of the interrupt, the core will call ide_complete_power_step()
1030 * with the error code if any. This routine should update the step value
1031 * and return. It should not start a new request. The core will call
1032 * ide_start_power_step() for the new step value, unless step have been
1033 * set to IDE_PM_COMPLETED.
1035 enum {
1036 IDE_PM_START_SUSPEND,
1037 IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND,
1038 IDE_PM_STANDBY,
1040 IDE_PM_START_RESUME,
1041 IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME,
1042 IDE_PM_IDLE,
1043 IDE_PM_RESTORE_DMA,
1045 IDE_PM_COMPLETED,
1048 int generic_ide_suspend(struct device *, pm_message_t);
1049 int generic_ide_resume(struct device *);
1051 void ide_complete_power_step(ide_drive_t *, struct request *);
1052 ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
1053 void ide_complete_pm_rq(ide_drive_t *, struct request *);
1054 void ide_check_pm_state(ide_drive_t *, struct request *);
1057 * Subdrivers support.
1059 * The gendriver.owner field should be set to the module owner of this driver.
1060 * The gendriver.name field should be set to the name of this driver
1062 struct ide_driver {
1063 const char *version;
1064 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1065 struct device_driver gen_driver;
1066 int (*probe)(ide_drive_t *);
1067 void (*remove)(ide_drive_t *);
1068 void (*resume)(ide_drive_t *);
1069 void (*shutdown)(ide_drive_t *);
1070 #ifdef CONFIG_IDE_PROC_FS
1071 ide_proc_entry_t * (*proc_entries)(ide_drive_t *);
1072 const struct ide_proc_devset * (*proc_devsets)(ide_drive_t *);
1073 #endif
1076 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1078 int ide_device_get(ide_drive_t *);
1079 void ide_device_put(ide_drive_t *);
1081 struct ide_ioctl_devset {
1082 unsigned int get_ioctl;
1083 unsigned int set_ioctl;
1084 const struct ide_devset *setting;
1087 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
1088 unsigned long, const struct ide_ioctl_devset *);
1090 int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
1092 extern int ide_vlb_clk;
1093 extern int ide_pci_clk;
1095 int ide_end_rq(ide_drive_t *, struct request *, blk_status_t, unsigned int);
1096 void ide_kill_rq(ide_drive_t *, struct request *);
1098 void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1099 void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1101 void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
1102 unsigned int);
1104 void ide_pad_transfer(ide_drive_t *, int, int);
1106 ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
1108 void ide_fix_driveid(u16 *);
1110 extern void ide_fixstring(u8 *, const int, const int);
1112 int ide_busy_sleep(ide_drive_t *, unsigned long, int);
1114 int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *);
1115 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1117 ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
1118 ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
1120 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1122 extern int ide_devset_execute(ide_drive_t *drive,
1123 const struct ide_devset *setting, int arg);
1125 void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
1126 int ide_complete_rq(ide_drive_t *, blk_status_t, unsigned int);
1128 void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
1129 void ide_tf_dump(const char *, struct ide_cmd *);
1131 void ide_exec_command(ide_hwif_t *, u8);
1132 u8 ide_read_status(ide_hwif_t *);
1133 u8 ide_read_altstatus(ide_hwif_t *);
1134 void ide_write_devctl(ide_hwif_t *, u8);
1136 void ide_dev_select(ide_drive_t *);
1137 void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
1138 void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
1140 void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1141 void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1143 void SELECT_MASK(ide_drive_t *, int);
1145 u8 ide_read_error(ide_drive_t *);
1146 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1148 int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
1150 int ide_check_atapi_device(ide_drive_t *, const char *);
1152 void ide_init_pc(struct ide_atapi_pc *);
1154 /* Disk head parking */
1155 extern wait_queue_head_t ide_park_wq;
1156 ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
1157 char *buf);
1158 ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
1159 const char *buf, size_t len);
1162 * Special requests for ide-tape block device strategy routine.
1164 * In order to service a character device command, we add special requests to
1165 * the tail of our block device request queue and wait for their completion.
1167 enum {
1168 REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
1169 REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
1170 REQ_IDETAPE_READ = (1 << 2),
1171 REQ_IDETAPE_WRITE = (1 << 3),
1174 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
1175 void *, unsigned int);
1177 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
1178 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
1179 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
1180 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
1181 void ide_retry_pc(ide_drive_t *drive);
1183 void ide_prep_sense(ide_drive_t *drive, struct request *rq);
1184 int ide_queue_sense_rq(ide_drive_t *drive, void *special);
1186 int ide_cd_expiry(ide_drive_t *);
1188 int ide_cd_get_xferlen(struct request *);
1190 ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
1192 ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
1194 void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
1196 void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
1198 int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
1199 int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
1201 int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
1203 int ide_dev_read_id(ide_drive_t *, u8, u16 *, int);
1205 extern int ide_driveid_update(ide_drive_t *);
1206 extern int ide_config_drive_speed(ide_drive_t *, u8);
1207 extern u8 eighty_ninty_three (ide_drive_t *);
1208 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1210 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1212 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1214 extern void ide_timer_expiry(unsigned long);
1215 extern irqreturn_t ide_intr(int irq, void *dev_id);
1216 extern void do_ide_request(struct request_queue *);
1217 extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
1219 void ide_init_disk(struct gendisk *, ide_drive_t *);
1221 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1222 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1223 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1224 #else
1225 #define ide_pci_register_driver(d) pci_register_driver(d)
1226 #endif
1228 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
1230 if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
1231 return 1;
1232 return 0;
1235 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
1236 struct ide_hw *, struct ide_hw **);
1237 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1239 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1240 int ide_pci_set_master(struct pci_dev *, const char *);
1241 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1242 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1243 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1244 #else
1245 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1246 const struct ide_port_info *d)
1248 return -EINVAL;
1250 #endif
1252 struct ide_pci_enablebit {
1253 u8 reg; /* byte pci reg holding the enable-bit */
1254 u8 mask; /* mask to isolate the enable-bit */
1255 u8 val; /* value of masked reg when "enabled" */
1258 enum {
1259 /* Uses ISA control ports not PCI ones. */
1260 IDE_HFLAG_ISA_PORTS = (1 << 0),
1261 /* single port device */
1262 IDE_HFLAG_SINGLE = (1 << 1),
1263 /* don't use legacy PIO blacklist */
1264 IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
1265 /* set for the second port of QD65xx */
1266 IDE_HFLAG_QD_2ND_PORT = (1 << 3),
1267 /* use PIO8/9 for prefetch off/on */
1268 IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
1269 /* use PIO6/7 for fast-devsel off/on */
1270 IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
1271 /* use 100-102 and 200-202 PIO values to set DMA modes */
1272 IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
1274 * keep DMA setting when programming PIO mode, may be used only
1275 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1277 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1278 /* program host for the transfer mode after programming device */
1279 IDE_HFLAG_POST_SET_MODE = (1 << 8),
1280 /* don't program host/device for the transfer mode ("smart" hosts) */
1281 IDE_HFLAG_NO_SET_MODE = (1 << 9),
1282 /* trust BIOS for programming chipset/device for DMA */
1283 IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
1284 /* host is CS5510/CS5520 */
1285 IDE_HFLAG_CS5520 = (1 << 11),
1286 /* ATAPI DMA is unsupported */
1287 IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
1288 /* set if host is a "non-bootable" controller */
1289 IDE_HFLAG_NON_BOOTABLE = (1 << 13),
1290 /* host doesn't support DMA */
1291 IDE_HFLAG_NO_DMA = (1 << 14),
1292 /* check if host is PCI IDE device before allowing DMA */
1293 IDE_HFLAG_NO_AUTODMA = (1 << 15),
1294 /* host uses MMIO */
1295 IDE_HFLAG_MMIO = (1 << 16),
1296 /* no LBA48 */
1297 IDE_HFLAG_NO_LBA48 = (1 << 17),
1298 /* no LBA48 DMA */
1299 IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
1300 /* data FIFO is cleared by an error */
1301 IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
1302 /* serialize ports */
1303 IDE_HFLAG_SERIALIZE = (1 << 20),
1304 /* host is DTC2278 */
1305 IDE_HFLAG_DTC2278 = (1 << 21),
1306 /* 4 devices on a single set of I/O ports */
1307 IDE_HFLAG_4DRIVES = (1 << 22),
1308 /* host is TRM290 */
1309 IDE_HFLAG_TRM290 = (1 << 23),
1310 /* use 32-bit I/O ops */
1311 IDE_HFLAG_IO_32BIT = (1 << 24),
1312 /* unmask IRQs */
1313 IDE_HFLAG_UNMASK_IRQS = (1 << 25),
1314 IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26),
1315 /* serialize ports if DMA is possible (for sl82c105) */
1316 IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
1317 /* force host out of "simplex" mode */
1318 IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
1319 /* DSC overlap is unsupported */
1320 IDE_HFLAG_NO_DSC = (1 << 29),
1321 /* never use 32-bit I/O ops */
1322 IDE_HFLAG_NO_IO_32BIT = (1 << 30),
1323 /* never unmask IRQs */
1324 IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
1327 #ifdef CONFIG_BLK_DEV_OFFBOARD
1328 # define IDE_HFLAG_OFF_BOARD 0
1329 #else
1330 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1331 #endif
1333 struct ide_port_info {
1334 char *name;
1336 int (*init_chipset)(struct pci_dev *);
1338 void (*get_lock)(irq_handler_t, void *);
1339 void (*release_lock)(void);
1341 void (*init_iops)(ide_hwif_t *);
1342 void (*init_hwif)(ide_hwif_t *);
1343 int (*init_dma)(ide_hwif_t *,
1344 const struct ide_port_info *);
1346 const struct ide_tp_ops *tp_ops;
1347 const struct ide_port_ops *port_ops;
1348 const struct ide_dma_ops *dma_ops;
1350 struct ide_pci_enablebit enablebits[2];
1352 hwif_chipset_t chipset;
1354 u16 max_sectors; /* if < than the default one */
1356 u32 host_flags;
1358 int irq_flags;
1360 u8 pio_mask;
1361 u8 swdma_mask;
1362 u8 mwdma_mask;
1363 u8 udma_mask;
1367 * State information carried for REQ_TYPE_ATA_PM_SUSPEND and REQ_TYPE_ATA_PM_RESUME
1368 * requests.
1370 struct ide_pm_state {
1371 /* PM state machine step value, currently driver specific */
1372 int pm_step;
1373 /* requested PM state value (S1, S2, S3, S4, ...) */
1374 u32 pm_state;
1375 void* data; /* for driver use */
1379 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1380 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1381 const struct ide_port_info *, void *);
1382 void ide_pci_remove(struct pci_dev *);
1384 #ifdef CONFIG_PM
1385 int ide_pci_suspend(struct pci_dev *, pm_message_t);
1386 int ide_pci_resume(struct pci_dev *);
1387 #else
1388 #define ide_pci_suspend NULL
1389 #define ide_pci_resume NULL
1390 #endif
1392 void ide_map_sg(ide_drive_t *, struct ide_cmd *);
1393 void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
1395 #define BAD_DMA_DRIVE 0
1396 #define GOOD_DMA_DRIVE 1
1398 struct drive_list_entry {
1399 const char *id_model;
1400 const char *id_firmware;
1403 int ide_in_drive_list(u16 *, const struct drive_list_entry *);
1405 #ifdef CONFIG_BLK_DEV_IDEDMA
1406 int ide_dma_good_drive(ide_drive_t *);
1407 int __ide_dma_bad_drive(ide_drive_t *);
1409 u8 ide_find_dma_mode(ide_drive_t *, u8);
1411 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1413 return ide_find_dma_mode(drive, XFER_UDMA_6);
1416 void ide_dma_off_quietly(ide_drive_t *);
1417 void ide_dma_off(ide_drive_t *);
1418 void ide_dma_on(ide_drive_t *);
1419 int ide_set_dma(ide_drive_t *);
1420 void ide_check_dma_crc(ide_drive_t *);
1421 ide_startstop_t ide_dma_intr(ide_drive_t *);
1423 int ide_allocate_dma_engine(ide_hwif_t *);
1424 void ide_release_dma_engine(ide_hwif_t *);
1426 int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
1427 void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
1429 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1430 int config_drive_for_dma(ide_drive_t *);
1431 int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
1432 void ide_dma_host_set(ide_drive_t *, int);
1433 int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
1434 extern void ide_dma_start(ide_drive_t *);
1435 int ide_dma_end(ide_drive_t *);
1436 int ide_dma_test_irq(ide_drive_t *);
1437 int ide_dma_sff_timer_expiry(ide_drive_t *);
1438 u8 ide_dma_sff_read_status(ide_hwif_t *);
1439 extern const struct ide_dma_ops sff_dma_ops;
1440 #else
1441 static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
1442 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1444 void ide_dma_lost_irq(ide_drive_t *);
1445 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
1447 #else
1448 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1449 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1450 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1451 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1452 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1453 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1454 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1455 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1456 static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
1457 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
1458 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1459 static inline int ide_dma_prepare(ide_drive_t *drive,
1460 struct ide_cmd *cmd) { return 1; }
1461 static inline void ide_dma_unmap_sg(ide_drive_t *drive,
1462 struct ide_cmd *cmd) { ; }
1463 #endif /* CONFIG_BLK_DEV_IDEDMA */
1465 #ifdef CONFIG_BLK_DEV_IDEACPI
1466 int ide_acpi_init(void);
1467 bool ide_port_acpi(ide_hwif_t *hwif);
1468 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1469 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1470 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1471 void ide_acpi_init_port(ide_hwif_t *);
1472 void ide_acpi_port_init_devices(ide_hwif_t *);
1473 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1474 #else
1475 static inline int ide_acpi_init(void) { return 0; }
1476 static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
1477 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1478 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1479 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1480 static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
1481 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1482 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1483 #endif
1485 void ide_register_region(struct gendisk *);
1486 void ide_unregister_region(struct gendisk *);
1488 void ide_check_nien_quirk_list(ide_drive_t *);
1489 void ide_undecoded_slave(ide_drive_t *);
1491 void ide_port_apply_params(ide_hwif_t *);
1492 int ide_sysfs_register_port(ide_hwif_t *);
1494 struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
1495 unsigned int);
1496 void ide_host_free(struct ide_host *);
1497 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1498 struct ide_hw **);
1499 int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
1500 struct ide_host **);
1501 void ide_host_remove(struct ide_host *);
1502 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1503 void ide_port_unregister_devices(ide_hwif_t *);
1504 void ide_port_scan(ide_hwif_t *);
1506 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1508 return hwif->hwif_data;
1511 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1513 hwif->hwif_data = data;
1516 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1518 u64 ide_get_lba_addr(struct ide_cmd *, int);
1519 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1521 struct ide_timing {
1522 u8 mode;
1523 u8 setup; /* t1 */
1524 u16 act8b; /* t2 for 8-bit io */
1525 u16 rec8b; /* t2i for 8-bit io */
1526 u16 cyc8b; /* t0 for 8-bit io */
1527 u16 active; /* t2 or tD */
1528 u16 recover; /* t2i or tK */
1529 u16 cycle; /* t0 */
1530 u16 udma; /* t2CYCTYP/2 */
1533 enum {
1534 IDE_TIMING_SETUP = (1 << 0),
1535 IDE_TIMING_ACT8B = (1 << 1),
1536 IDE_TIMING_REC8B = (1 << 2),
1537 IDE_TIMING_CYC8B = (1 << 3),
1538 IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1539 IDE_TIMING_CYC8B,
1540 IDE_TIMING_ACTIVE = (1 << 4),
1541 IDE_TIMING_RECOVER = (1 << 5),
1542 IDE_TIMING_CYCLE = (1 << 6),
1543 IDE_TIMING_UDMA = (1 << 7),
1544 IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1545 IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1546 IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1549 struct ide_timing *ide_timing_find_mode(u8);
1550 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1551 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1552 struct ide_timing *, unsigned int);
1553 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1555 #ifdef CONFIG_IDE_XFER_MODE
1556 int ide_scan_pio_blacklist(char *);
1557 const char *ide_xfer_verbose(u8);
1558 int ide_pio_need_iordy(ide_drive_t *, const u8);
1559 int ide_set_pio_mode(ide_drive_t *, u8);
1560 int ide_set_dma_mode(ide_drive_t *, u8);
1561 void ide_set_pio(ide_drive_t *, u8);
1562 int ide_set_xfer_rate(ide_drive_t *, u8);
1563 #else
1564 static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
1565 static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
1566 #endif
1568 static inline void ide_set_max_pio(ide_drive_t *drive)
1570 ide_set_pio(drive, 255);
1573 char *ide_media_string(ide_drive_t *);
1575 extern const struct attribute_group *ide_dev_groups[];
1576 extern struct bus_type ide_bus_type;
1577 extern struct class *ide_port_class;
1579 static inline void ide_dump_identify(u8 *id)
1581 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1584 static inline int hwif_to_node(ide_hwif_t *hwif)
1586 return hwif->dev ? dev_to_node(hwif->dev) : -1;
1589 static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
1591 ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
1593 return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
1596 static inline void *ide_get_drivedata(ide_drive_t *drive)
1598 return drive->drive_data;
1601 static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
1603 drive->drive_data = data;
1606 #define ide_port_for_each_dev(i, dev, port) \
1607 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1609 #define ide_port_for_each_present_dev(i, dev, port) \
1610 for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1611 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1613 #define ide_host_for_each_port(i, port, host) \
1614 for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
1617 #endif /* _IDE_H */