4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
8 * The initial developer of the original code is David A. Hinds
9 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
10 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
12 * (C) 1999 David A. Hinds
18 #include <linux/device.h>
19 #include <linux/sched.h> /* task_struct, completion */
20 #include <linux/mutex.h>
22 #include <pcmcia/cs_types.h>
23 #include <pcmcia/cs.h>
25 #include <linux/pci.h>
28 /* Definitions for card status flags for GetStatus */
29 #define SS_WRPROT 0x0001
30 #define SS_CARDLOCK 0x0002
31 #define SS_EJECTION 0x0004
32 #define SS_INSERTION 0x0008
33 #define SS_BATDEAD 0x0010
34 #define SS_BATWARN 0x0020
35 #define SS_READY 0x0040
36 #define SS_DETECT 0x0080
37 #define SS_POWERON 0x0100
39 #define SS_STSCHG 0x0400
40 #define SS_CARDBUS 0x0800
41 #define SS_3VCARD 0x1000
42 #define SS_XVCARD 0x2000
43 #define SS_PENDING 0x4000
44 #define SS_ZVCARD 0x8000
46 /* InquireSocket capabilities */
47 #define SS_CAP_PAGE_REGS 0x0001
48 #define SS_CAP_VIRTUAL_BUS 0x0002
49 #define SS_CAP_MEM_ALIGN 0x0004
50 #define SS_CAP_STATIC_MAP 0x0008
51 #define SS_CAP_PCCARD 0x4000
52 #define SS_CAP_CARDBUS 0x8000
54 /* for GetSocket, SetSocket */
55 typedef struct socket_state_t
{
62 extern socket_state_t dead_socket
;
64 /* Socket configuration flags */
65 #define SS_PWR_AUTO 0x0010
66 #define SS_IOCARD 0x0020
67 #define SS_RESET 0x0040
68 #define SS_DMA_MODE 0x0080
69 #define SS_SPKR_ENA 0x0100
70 #define SS_OUTPUT_ENA 0x0200
72 /* Flags for I/O port and memory windows */
73 #define MAP_ACTIVE 0x01
74 #define MAP_16BIT 0x02
75 #define MAP_AUTOSZ 0x04
77 #define MAP_WRPROT 0x10
78 #define MAP_ATTRIB 0x20
79 #define MAP_USE_WAIT 0x40
80 #define MAP_PREFETCH 0x80
82 /* Use this just for bridge windows */
83 #define MAP_IOSPACE 0x20
85 /* power hook operations */
86 #define HOOK_POWER_PRE 0x01
87 #define HOOK_POWER_POST 0x02
89 typedef struct pccard_io_map
{
93 phys_addr_t start
, stop
;
96 typedef struct pccard_mem_map
{
100 phys_addr_t static_start
;
102 struct resource
*res
;
105 typedef struct io_window_t
{
107 struct resource
*res
;
110 /* Maximum number of IO windows per socket */
113 /* Maximum number of memory windows per socket */
120 struct pcmcia_socket
;
121 struct pccard_resource_ops
;
123 struct pcmcia_callback
;
126 struct pccard_operations
{
127 int (*init
)(struct pcmcia_socket
*s
);
128 int (*suspend
)(struct pcmcia_socket
*s
);
129 int (*get_status
)(struct pcmcia_socket
*s
, u_int
*value
);
130 int (*set_socket
)(struct pcmcia_socket
*s
, socket_state_t
*state
);
131 int (*set_io_map
)(struct pcmcia_socket
*s
, struct pccard_io_map
*io
);
132 int (*set_mem_map
)(struct pcmcia_socket
*s
, struct pccard_mem_map
*mem
);
135 struct pcmcia_socket
{
136 struct module
*owner
;
137 socket_state_t socket
;
139 u_int suspended_state
; /* state before suspend */
142 pccard_mem_map cis_mem
;
143 void __iomem
*cis_virt
;
144 io_window_t io
[MAX_IO_WIN
];
145 pccard_mem_map win
[MAX_WIN
];
146 struct list_head cis_cache
;
150 struct list_head socket_list
;
151 struct completion socket_released
;
154 unsigned int sock
; /* socket number */
157 /* socket capabilities */
163 struct pci_dev
*cb_dev
;
166 /* socket setup is done so resources should be able to be allocated.
167 * Only if set to 1, calls to find_{io,mem}_region are handled, and
168 * insertio events are actually managed by the PCMCIA layer.*/
169 u8 resource_setup_done
:1;
171 /* It's old if resource setup is done using adjust_resource_info() */
172 u8 resource_setup_old
:1;
173 u8 resource_setup_new
:1;
177 /* socket operations */
178 struct pccard_operations
*ops
;
179 struct pccard_resource_ops
*resource_ops
;
182 /* Zoom video behaviour is so chip specific its not worth adding
184 void (*zoom_video
)(struct pcmcia_socket
*,
187 /* so is power hook */
188 int (*power_hook
)(struct pcmcia_socket
*sock
, int operation
);
190 /* allows tuning the CB bridge before loading driver for the CB card */
191 #ifdef CONFIG_CARDBUS
192 void (*tune_bridge
)(struct pcmcia_socket
*sock
, struct pci_bus
*bus
);
196 struct task_struct
*thread
;
197 struct completion thread_done
;
198 unsigned int thread_events
;
199 unsigned int sysfs_events
;
201 /* For the non-trivial interaction between these locks,
202 * see Documentation/pcmcia/locking.txt */
203 struct mutex skt_mutex
;
204 struct mutex ops_mutex
;
206 /* protects thread_events and sysfs_events */
207 spinlock_t thread_lock
;
209 /* pcmcia (16-bit) */
210 struct pcmcia_callback
*callback
;
212 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
213 /* The following elements refer to 16-bit PCMCIA devices inserted
215 struct list_head devices_list
;
217 /* the number of devices, used only internally and subject to
218 * incorrectness and change */
223 /* "master" ioctl is used */
225 /* the PCMCIA card consists of two pseudo devices */
231 /* non-zero if PCMCIA card is present */
234 /* IRQ to be used by PCMCIA devices. May not be IRQ 0. */
235 unsigned int pcmcia_irq
;
237 #ifdef CONFIG_PCMCIA_IOCTL
238 struct user_info_t
*user
;
239 wait_queue_head_t queue
;
240 #endif /* CONFIG_PCMCIA_IOCTL */
241 #endif /* CONFIG_PCMCIA */
245 /* data internal to the socket driver */
247 /* status of the card during resume from a system sleep state */
252 /* socket drivers must define the resource operations type they use. There
254 * - pccard_static_ops iomem and ioport areas are assigned statically
255 * - pccard_iodyn_ops iomem areas is assigned statically, ioport
257 * If this option is selected, use
258 * "select PCCARD_IODYN" in Kconfig.
259 * - pccard_nonstatic_ops iomem and ioport areas are assigned dynamically.
260 * If this option is selected, use
261 * "select PCCARD_NONSTATIC" in Kconfig.
264 extern struct pccard_resource_ops pccard_static_ops
;
265 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
266 extern struct pccard_resource_ops pccard_iodyn_ops
;
267 extern struct pccard_resource_ops pccard_nonstatic_ops
;
269 /* If PCMCIA is not used, but only CARDBUS, these functions are not used
270 * at all. Therefore, do not use the large (240K!) rsrc_nonstatic module
272 #define pccard_iodyn_ops pccard_static_ops
273 #define pccard_nonstatic_ops pccard_static_ops
277 /* socket drivers use this callback in their IRQ handler */
278 extern void pcmcia_parse_events(struct pcmcia_socket
*socket
,
279 unsigned int events
);
281 /* to register and unregister a socket */
282 extern int pcmcia_register_socket(struct pcmcia_socket
*socket
);
283 extern void pcmcia_unregister_socket(struct pcmcia_socket
*socket
);
286 #endif /* _LINUX_SS_H */