?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ipv4: add LINUX_MIB_IPRPFILTER snmp counter
[linux-rapidio-2.6.git] / drivers / spi / spi_txx9.c
blobdfa024b633e173787dd7c467d7581b27f2d0fd79
1 /*
2 * spi_txx9.c - TXx9 SPI controller driver.
3 *
4 * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
5 * Copyright (C) 2000-2001 Toshiba Corporation
6 *
7 * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
8 * terms of the GNU General Public License version 2. This program is
9 * licensed "as is" without any warranty of any kind, whether express
10 * or implied.
11 *
12 * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
13 *
14 * Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp)
15 */
16 #include <linux/init.h>
17 #include <linux/delay.h>
18 #include <linux/errno.h>
19 #include <linux/interrupt.h>
20 #include <linux/platform_device.h>
21 #include <linux/sched.h>
22 #include <linux/spinlock.h>
23 #include <linux/workqueue.h>
24 #include <linux/spi/spi.h>
25 #include <linux/err.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
28 #include <asm/gpio.h>
29
30
31 #define SPI_FIFO_SIZE 4
32 #define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */
33 #define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */
34
35 #define TXx9_SPMCR 0x00
36 #define TXx9_SPCR0 0x04
37 #define TXx9_SPCR1 0x08
38 #define TXx9_SPFS 0x0c
39 #define TXx9_SPSR 0x14
40 #define TXx9_SPDR 0x18
41
42 /* SPMCR : SPI Master Control */
43 #define TXx9_SPMCR_OPMODE 0xc0
44 #define TXx9_SPMCR_CONFIG 0x40
45 #define TXx9_SPMCR_ACTIVE 0x80
46 #define TXx9_SPMCR_SPSTP 0x02
47 #define TXx9_SPMCR_BCLR 0x01
48
49 /* SPCR0 : SPI Control 0 */
50 #define TXx9_SPCR0_TXIFL_MASK 0xc000
51 #define TXx9_SPCR0_RXIFL_MASK 0x3000
52 #define TXx9_SPCR0_SIDIE 0x0800
53 #define TXx9_SPCR0_SOEIE 0x0400
54 #define TXx9_SPCR0_RBSIE 0x0200
55 #define TXx9_SPCR0_TBSIE 0x0100
56 #define TXx9_SPCR0_IFSPSE 0x0010
57 #define TXx9_SPCR0_SBOS 0x0004
58 #define TXx9_SPCR0_SPHA 0x0002
59 #define TXx9_SPCR0_SPOL 0x0001
60
61 /* SPSR : SPI Status */
62 #define TXx9_SPSR_TBSI 0x8000
63 #define TXx9_SPSR_RBSI 0x4000
64 #define TXx9_SPSR_TBS_MASK 0x3800
65 #define TXx9_SPSR_RBS_MASK 0x0700
66 #define TXx9_SPSR_SPOE 0x0080
67 #define TXx9_SPSR_IFSD 0x0008
68 #define TXx9_SPSR_SIDLE 0x0004
69 #define TXx9_SPSR_STRDY 0x0002
70 #define TXx9_SPSR_SRRDY 0x0001
71
72
73 struct txx9spi {
74 struct workqueue_struct *workqueue;
75 struct work_struct work;
76 spinlock_t lock; /* protect 'queue' */
77 struct list_head queue;
78 wait_queue_head_t waitq;
79 void __iomem *membase;
80 int baseclk;
81 struct clk *clk;
82 u32 max_speed_hz, min_speed_hz;
83 int last_chipselect;
84 int last_chipselect_val;
85 };
86
87 static u32 txx9spi_rd(struct txx9spi *c, int reg)
88 {
89 return __raw_readl(c->membase + reg);
90 }
91 static void txx9spi_wr(struct txx9spi *c, u32 val, int reg)
92 {
93 __raw_writel(val, c->membase + reg);
94 }
95
96 static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
97 int on, unsigned int cs_delay)
98 {
99 int val = (spi->mode & SPI_CS_HIGH) ? on : !on;
100 if (on) {
101 /* deselect the chip with cs_change hint in last transfer */
102 if (c->last_chipselect >= 0)
103 gpio_set_value(c->last_chipselect,
104 !c->last_chipselect_val);
105 c->last_chipselect = spi->chip_select;
106 c->last_chipselect_val = val;
107 } else {
108 c->last_chipselect = -1;
109 ndelay(cs_delay); /* CS Hold Time */
110 }
111 gpio_set_value(spi->chip_select, val);
112 ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */
113 }
114
115 static int txx9spi_setup(struct spi_device *spi)
116 {
117 struct txx9spi *c = spi_master_get_devdata(spi->master);
118 u8 bits_per_word;
119
120 if (!spi->max_speed_hz
121 || spi->max_speed_hz > c->max_speed_hz
122 || spi->max_speed_hz < c->min_speed_hz)
123 return -EINVAL;
124
125 bits_per_word = spi->bits_per_word;
126 if (bits_per_word != 8 && bits_per_word != 16)
127 return -EINVAL;
128
129 if (gpio_direction_output(spi->chip_select,
130 !(spi->mode & SPI_CS_HIGH))) {
131 dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n");
132 return -EINVAL;
133 }
134
135 /* deselect chip */
136 spin_lock(&c->lock);
137 txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz);
138 spin_unlock(&c->lock);
139
140 return 0;
141 }
142
143 static irqreturn_t txx9spi_interrupt(int irq, void *dev_id)
144 {
145 struct txx9spi *c = dev_id;
146
147 /* disable rx intr */
148 txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE,
149 TXx9_SPCR0);
150 wake_up(&c->waitq);
151 return IRQ_HANDLED;
152 }
153
154 static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
155 {
156 struct spi_device *spi = m->spi;
157 struct spi_transfer *t;
158 unsigned int cs_delay;
159 unsigned int cs_change = 1;
160 int status = 0;
161 u32 mcr;
162 u32 prev_speed_hz = 0;
163 u8 prev_bits_per_word = 0;
164
165 /* CS setup/hold/recovery time in nsec */
166 cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz;
167
168 mcr = txx9spi_rd(c, TXx9_SPMCR);
169 if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) {
170 dev_err(&spi->dev, "Bad mode.\n");
171 status = -EIO;
172 goto exit;
173 }
174 mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
175
176 /* enter config mode */
177 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
178 txx9spi_wr(c, TXx9_SPCR0_SBOS
179 | ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0)
180 | ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0)
181 | 0x08,
182 TXx9_SPCR0);
183
184 list_for_each_entry (t, &m->transfers, transfer_list) {
185 const void *txbuf = t->tx_buf;
186 void *rxbuf = t->rx_buf;
187 u32 data;
188 unsigned int len = t->len;
189 unsigned int wsize;
190 u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
191 u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
192
193 bits_per_word = bits_per_word ? : 8;
194 wsize = bits_per_word >> 3; /* in bytes */
195
196 if (prev_speed_hz != speed_hz
197 || prev_bits_per_word != bits_per_word) {
198 int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1;
199 n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER);
200 /* enter config mode */
201 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR,
202 TXx9_SPMCR);
203 txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1);
204 /* enter active mode */
205 txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR);
206
207 prev_speed_hz = speed_hz;
208 prev_bits_per_word = bits_per_word;
209 }
210
211 if (cs_change)
212 txx9spi_cs_func(spi, c, 1, cs_delay);
213 cs_change = t->cs_change;
214 while (len) {
215 unsigned int count = SPI_FIFO_SIZE;
216 int i;
217 u32 cr0;
218
219 if (len < count * wsize)
220 count = len / wsize;
221 /* now tx must be idle... */
222 while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE))
223 cpu_relax();
224 cr0 = txx9spi_rd(c, TXx9_SPCR0);
225 cr0 &= ~TXx9_SPCR0_RXIFL_MASK;
226 cr0 |= (count - 1) << 12;
227 /* enable rx intr */
228 cr0 |= TXx9_SPCR0_RBSIE;
229 txx9spi_wr(c, cr0, TXx9_SPCR0);
230 /* send */
231 for (i = 0; i < count; i++) {
232 if (txbuf) {
233 data = (wsize == 1)
234 ? *(const u8 *)txbuf
235 : *(const u16 *)txbuf;
236 txx9spi_wr(c, data, TXx9_SPDR);
237 txbuf += wsize;
238 } else
239 txx9spi_wr(c, 0, TXx9_SPDR);
240 }
241 /* wait all rx data */
242 wait_event(c->waitq,
243 txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI);
244 /* receive */
245 for (i = 0; i < count; i++) {
246 data = txx9spi_rd(c, TXx9_SPDR);
247 if (rxbuf) {
248 if (wsize == 1)
249 *(u8 *)rxbuf = data;
250 else
251 *(u16 *)rxbuf = data;
252 rxbuf += wsize;
253 }
254 }
255 len -= count * wsize;
256 }
257 m->actual_length += t->len;
258 if (t->delay_usecs)
259 udelay(t->delay_usecs);
260
261 if (!cs_change)
262 continue;
263 if (t->transfer_list.next == &m->transfers)
264 break;
265 /* sometimes a short mid-message deselect of the chip
266 * may be needed to terminate a mode or command
267 */
268 txx9spi_cs_func(spi, c, 0, cs_delay);
269 }
270
271 exit:
272 m->status = status;
273 m->complete(m->context);
274
275 /* normally deactivate chipselect ... unless no error and
276 * cs_change has hinted that the next message will probably
277 * be for this chip too.
278 */
279 if (!(status == 0 && cs_change))
280 txx9spi_cs_func(spi, c, 0, cs_delay);
281
282 /* enter config mode */
283 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
284 }
285
286 static void txx9spi_work(struct work_struct *work)
287 {
288 struct txx9spi *c = container_of(work, struct txx9spi, work);
289 unsigned long flags;
290
291 spin_lock_irqsave(&c->lock, flags);
292 while (!list_empty(&c->queue)) {
293 struct spi_message *m;
294
295 m = container_of(c->queue.next, struct spi_message, queue);
296 list_del_init(&m->queue);
297 spin_unlock_irqrestore(&c->lock, flags);
298
299 txx9spi_work_one(c, m);
300
301 spin_lock_irqsave(&c->lock, flags);
302 }
303 spin_unlock_irqrestore(&c->lock, flags);
304 }
305
306 static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
307 {
308 struct spi_master *master = spi->master;
309 struct txx9spi *c = spi_master_get_devdata(master);
310 struct spi_transfer *t;
311 unsigned long flags;
312
313 m->actual_length = 0;
314
315 /* check each transfer's parameters */
316 list_for_each_entry (t, &m->transfers, transfer_list) {
317 u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
318 u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
319
320 bits_per_word = bits_per_word ? : 8;
321 if (!t->tx_buf && !t->rx_buf && t->len)
322 return -EINVAL;
323 if (bits_per_word != 8 && bits_per_word != 16)
324 return -EINVAL;
325 if (t->len & ((bits_per_word >> 3) - 1))
326 return -EINVAL;
327 if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz)
328 return -EINVAL;
329 }
330
331 spin_lock_irqsave(&c->lock, flags);
332 list_add_tail(&m->queue, &c->queue);
333 queue_work(c->workqueue, &c->work);
334 spin_unlock_irqrestore(&c->lock, flags);
335
336 return 0;
337 }
338
339 static int __init txx9spi_probe(struct platform_device *dev)
340 {
341 struct spi_master *master;
342 struct txx9spi *c;
343 struct resource *res;
344 int ret = -ENODEV;
345 u32 mcr;
346 int irq;
347
348 master = spi_alloc_master(&dev->dev, sizeof(*c));
349 if (!master)
350 return ret;
351 c = spi_master_get_devdata(master);
352 platform_set_drvdata(dev, master);
353
354 INIT_WORK(&c->work, txx9spi_work);
355 spin_lock_init(&c->lock);
356 INIT_LIST_HEAD(&c->queue);
357 init_waitqueue_head(&c->waitq);
358
359 c->clk = clk_get(&dev->dev, "spi-baseclk");
360 if (IS_ERR(c->clk)) {
361 ret = PTR_ERR(c->clk);
362 c->clk = NULL;
363 goto exit;
364 }
365 ret = clk_enable(c->clk);
366 if (ret) {
367 clk_put(c->clk);
368 c->clk = NULL;
369 goto exit;
370 }
371 c->baseclk = clk_get_rate(c->clk);
372 c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
373 c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
374
375 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
376 if (!res)
377 goto exit_busy;
378 if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res),
379 "spi_txx9"))
380 goto exit_busy;
381 c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res));
382 if (!c->membase)
383 goto exit_busy;
384
385 /* enter config mode */
386 mcr = txx9spi_rd(c, TXx9_SPMCR);
387 mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
388 txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
389
390 irq = platform_get_irq(dev, 0);
391 if (irq < 0)
392 goto exit_busy;
393 ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
394 "spi_txx9", c);
395 if (ret)
396 goto exit;
397
398 c->workqueue = create_singlethread_workqueue(
399 dev_name(master->dev.parent));
400 if (!c->workqueue)
401 goto exit_busy;
402 c->last_chipselect = -1;
403
404 dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
405 (unsigned long long)res->start, irq,
406 (c->baseclk + 500000) / 1000000);
407
408 /* the spi->mode bits understood by this driver: */
409 master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
410
411 master->bus_num = dev->id;
412 master->setup = txx9spi_setup;
413 master->transfer = txx9spi_transfer;
414 master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
415
416 ret = spi_register_master(master);
417 if (ret)
418 goto exit;
419 return 0;
420 exit_busy:
421 ret = -EBUSY;
422 exit:
423 if (c->workqueue)
424 destroy_workqueue(c->workqueue);
425 if (c->clk) {
426 clk_disable(c->clk);
427 clk_put(c->clk);
428 }
429 platform_set_drvdata(dev, NULL);
430 spi_master_put(master);
431 return ret;
432 }
433
434 static int __exit txx9spi_remove(struct platform_device *dev)
435 {
436 struct spi_master *master = spi_master_get(platform_get_drvdata(dev));
437 struct txx9spi *c = spi_master_get_devdata(master);
438
439 spi_unregister_master(master);
440 platform_set_drvdata(dev, NULL);
441 destroy_workqueue(c->workqueue);
442 clk_disable(c->clk);
443 clk_put(c->clk);
444 spi_master_put(master);
445 return 0;
446 }
447
448 /* work with hotplug and coldplug */
449 MODULE_ALIAS("platform:spi_txx9");
450
451 static struct platform_driver txx9spi_driver = {
452 .remove = __exit_p(txx9spi_remove),
453 .driver = {
454 .name = "spi_txx9",
455 .owner = THIS_MODULE,
456 },
457 };
458
459 static int __init txx9spi_init(void)
460 {
461 return platform_driver_probe(&txx9spi_driver, txx9spi_probe);
462 }
463 subsys_initcall(txx9spi_init);
464
465 static void __exit txx9spi_exit(void)
466 {
467 platform_driver_unregister(&txx9spi_driver);
468 }
469 module_exit(txx9spi_exit);
470
471 MODULE_DESCRIPTION("TXx9 SPI Driver");
472 MODULE_LICENSE("GPL");
Linux RapidIO development tree