?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
PM / Suspend: Fix ordering of calls in suspend error paths
[linux-kbuild.git] / drivers / ssb / main.c
blob51275aac5b34df0040ff02781a5f308dadc32753
1 /*
2 * Sonics Silicon Backplane
3 * Subsystem core
4 *
5 * Copyright 2005, Broadcom Corporation
6 * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
7 *
8 * Licensed under the GNU/GPL. See COPYING for details.
9 */
10
11 #include "ssb_private.h"
12
13 #include <linux/delay.h>
14 #include <linux/io.h>
15 #include <linux/ssb/ssb.h>
16 #include <linux/ssb/ssb_regs.h>
17 #include <linux/ssb/ssb_driver_gige.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/pci.h>
20 #include <linux/mmc/sdio_func.h>
21 #include <linux/slab.h>
22
23 #include <pcmcia/cs_types.h>
24 #include <pcmcia/cs.h>
25 #include <pcmcia/cistpl.h>
26 #include <pcmcia/ds.h>
27
28
29 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
30 MODULE_LICENSE("GPL");
31
32
33 /* Temporary list of yet-to-be-attached buses */
34 static LIST_HEAD(attach_queue);
35 /* List if running buses */
36 static LIST_HEAD(buses);
37 /* Software ID counter */
38 static unsigned int next_busnumber;
39 /* buses_mutes locks the two buslists and the next_busnumber.
40 * Don't lock this directly, but use ssb_buses_[un]lock() below. */
41 static DEFINE_MUTEX(buses_mutex);
42
43 /* There are differences in the codeflow, if the bus is
44 * initialized from early boot, as various needed services
45 * are not available early. This is a mechanism to delay
46 * these initializations to after early boot has finished.
47 * It's also used to avoid mutex locking, as that's not
48 * available and needed early. */
49 static bool ssb_is_early_boot = 1;
50
51 static void ssb_buses_lock(void);
52 static void ssb_buses_unlock(void);
53
54
55 #ifdef CONFIG_SSB_PCIHOST
56 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
57 {
58 struct ssb_bus *bus;
59
60 ssb_buses_lock();
61 list_for_each_entry(bus, &buses, list) {
62 if (bus->bustype == SSB_BUSTYPE_PCI &&
63 bus->host_pci == pdev)
64 goto found;
65 }
66 bus = NULL;
67 found:
68 ssb_buses_unlock();
69
70 return bus;
71 }
72 #endif /* CONFIG_SSB_PCIHOST */
73
74 #ifdef CONFIG_SSB_PCMCIAHOST
75 struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
76 {
77 struct ssb_bus *bus;
78
79 ssb_buses_lock();
80 list_for_each_entry(bus, &buses, list) {
81 if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
82 bus->host_pcmcia == pdev)
83 goto found;
84 }
85 bus = NULL;
86 found:
87 ssb_buses_unlock();
88
89 return bus;
90 }
91 #endif /* CONFIG_SSB_PCMCIAHOST */
92
93 #ifdef CONFIG_SSB_SDIOHOST
94 struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
95 {
96 struct ssb_bus *bus;
97
98 ssb_buses_lock();
99 list_for_each_entry(bus, &buses, list) {
100 if (bus->bustype == SSB_BUSTYPE_SDIO &&
101 bus->host_sdio == func)
102 goto found;
103 }
104 bus = NULL;
105 found:
106 ssb_buses_unlock();
107
108 return bus;
109 }
110 #endif /* CONFIG_SSB_SDIOHOST */
111
112 int ssb_for_each_bus_call(unsigned long data,
113 int (*func)(struct ssb_bus *bus, unsigned long data))
114 {
115 struct ssb_bus *bus;
116 int res;
117
118 ssb_buses_lock();
119 list_for_each_entry(bus, &buses, list) {
120 res = func(bus, data);
121 if (res >= 0) {
122 ssb_buses_unlock();
123 return res;
124 }
125 }
126 ssb_buses_unlock();
127
128 return -ENODEV;
129 }
130
131 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
132 {
133 if (dev)
134 get_device(dev->dev);
135 return dev;
136 }
137
138 static void ssb_device_put(struct ssb_device *dev)
139 {
140 if (dev)
141 put_device(dev->dev);
142 }
143
144 static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
145 {
146 if (drv)
147 get_driver(&drv->drv);
148 return drv;
149 }
150
151 static inline void ssb_driver_put(struct ssb_driver *drv)
152 {
153 if (drv)
154 put_driver(&drv->drv);
155 }
156
157 static int ssb_device_resume(struct device *dev)
158 {
159 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
160 struct ssb_driver *ssb_drv;
161 int err = 0;
162
163 if (dev->driver) {
164 ssb_drv = drv_to_ssb_drv(dev->driver);
165 if (ssb_drv && ssb_drv->resume)
166 err = ssb_drv->resume(ssb_dev);
167 if (err)
168 goto out;
169 }
170 out:
171 return err;
172 }
173
174 static int ssb_device_suspend(struct device *dev, pm_message_t state)
175 {
176 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
177 struct ssb_driver *ssb_drv;
178 int err = 0;
179
180 if (dev->driver) {
181 ssb_drv = drv_to_ssb_drv(dev->driver);
182 if (ssb_drv && ssb_drv->suspend)
183 err = ssb_drv->suspend(ssb_dev, state);
184 if (err)
185 goto out;
186 }
187 out:
188 return err;
189 }
190
191 int ssb_bus_resume(struct ssb_bus *bus)
192 {
193 int err;
194
195 /* Reset HW state information in memory, so that HW is
196 * completely reinitialized. */
197 bus->mapped_device = NULL;
198 #ifdef CONFIG_SSB_DRIVER_PCICORE
199 bus->pcicore.setup_done = 0;
200 #endif
201
202 err = ssb_bus_powerup(bus, 0);
203 if (err)
204 return err;
205 err = ssb_pcmcia_hardware_setup(bus);
206 if (err) {
207 ssb_bus_may_powerdown(bus);
208 return err;
209 }
210 ssb_chipco_resume(&bus->chipco);
211 ssb_bus_may_powerdown(bus);
212
213 return 0;
214 }
215 EXPORT_SYMBOL(ssb_bus_resume);
216
217 int ssb_bus_suspend(struct ssb_bus *bus)
218 {
219 ssb_chipco_suspend(&bus->chipco);
220 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
221
222 return 0;
223 }
224 EXPORT_SYMBOL(ssb_bus_suspend);
225
226 #ifdef CONFIG_SSB_SPROM
227 /** ssb_devices_freeze - Freeze all devices on the bus.
228 *
229 * After freezing no device driver will be handling a device
230 * on this bus anymore. ssb_devices_thaw() must be called after
231 * a successful freeze to reactivate the devices.
232 *
233 * @bus: The bus.
234 * @ctx: Context structure. Pass this to ssb_devices_thaw().
235 */
236 int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
237 {
238 struct ssb_device *sdev;
239 struct ssb_driver *sdrv;
240 unsigned int i;
241
242 memset(ctx, 0, sizeof(*ctx));
243 ctx->bus = bus;
244 SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
245
246 for (i = 0; i < bus->nr_devices; i++) {
247 sdev = ssb_device_get(&bus->devices[i]);
248
249 if (!sdev->dev || !sdev->dev->driver ||
250 !device_is_registered(sdev->dev)) {
251 ssb_device_put(sdev);
252 continue;
253 }
254 sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
255 if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
256 ssb_device_put(sdev);
257 continue;
258 }
259 sdrv->remove(sdev);
260 ctx->device_frozen[i] = 1;
261 }
262
263 return 0;
264 }
265
266 /** ssb_devices_thaw - Unfreeze all devices on the bus.
267 *
268 * This will re-attach the device drivers and re-init the devices.
269 *
270 * @ctx: The context structure from ssb_devices_freeze()
271 */
272 int ssb_devices_thaw(struct ssb_freeze_context *ctx)
273 {
274 struct ssb_bus *bus = ctx->bus;
275 struct ssb_device *sdev;
276 struct ssb_driver *sdrv;
277 unsigned int i;
278 int err, result = 0;
279
280 for (i = 0; i < bus->nr_devices; i++) {
281 if (!ctx->device_frozen[i])
282 continue;
283 sdev = &bus->devices[i];
284
285 if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
286 continue;
287 sdrv = drv_to_ssb_drv(sdev->dev->driver);
288 if (SSB_WARN_ON(!sdrv || !sdrv->probe))
289 continue;
290
291 err = sdrv->probe(sdev, &sdev->id);
292 if (err) {
293 ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
294 dev_name(sdev->dev));
295 result = err;
296 }
297 ssb_driver_put(sdrv);
298 ssb_device_put(sdev);
299 }
300
301 return result;
302 }
303 #endif /* CONFIG_SSB_SPROM */
304
305 static void ssb_device_shutdown(struct device *dev)
306 {
307 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
308 struct ssb_driver *ssb_drv;
309
310 if (!dev->driver)
311 return;
312 ssb_drv = drv_to_ssb_drv(dev->driver);
313 if (ssb_drv && ssb_drv->shutdown)
314 ssb_drv->shutdown(ssb_dev);
315 }
316
317 static int ssb_device_remove(struct device *dev)
318 {
319 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
320 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
321
322 if (ssb_drv && ssb_drv->remove)
323 ssb_drv->remove(ssb_dev);
324 ssb_device_put(ssb_dev);
325
326 return 0;
327 }
328
329 static int ssb_device_probe(struct device *dev)
330 {
331 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
332 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
333 int err = 0;
334
335 ssb_device_get(ssb_dev);
336 if (ssb_drv && ssb_drv->probe)
337 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
338 if (err)
339 ssb_device_put(ssb_dev);
340
341 return err;
342 }
343
344 static int ssb_match_devid(const struct ssb_device_id *tabid,
345 const struct ssb_device_id *devid)
346 {
347 if ((tabid->vendor != devid->vendor) &&
348 tabid->vendor != SSB_ANY_VENDOR)
349 return 0;
350 if ((tabid->coreid != devid->coreid) &&
351 tabid->coreid != SSB_ANY_ID)
352 return 0;
353 if ((tabid->revision != devid->revision) &&
354 tabid->revision != SSB_ANY_REV)
355 return 0;
356 return 1;
357 }
358
359 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
360 {
361 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
362 struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
363 const struct ssb_device_id *id;
364
365 for (id = ssb_drv->id_table;
366 id->vendor || id->coreid || id->revision;
367 id++) {
368 if (ssb_match_devid(id, &ssb_dev->id))
369 return 1; /* found */
370 }
371
372 return 0;
373 }
374
375 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
376 {
377 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
378
379 if (!dev)
380 return -ENODEV;
381
382 return add_uevent_var(env,
383 "MODALIAS=ssb:v%04Xid%04Xrev%02X",
384 ssb_dev->id.vendor, ssb_dev->id.coreid,
385 ssb_dev->id.revision);
386 }
387
388 static struct bus_type ssb_bustype = {
389 .name = "ssb",
390 .match = ssb_bus_match,
391 .probe = ssb_device_probe,
392 .remove = ssb_device_remove,
393 .shutdown = ssb_device_shutdown,
394 .suspend = ssb_device_suspend,
395 .resume = ssb_device_resume,
396 .uevent = ssb_device_uevent,
397 };
398
399 static void ssb_buses_lock(void)
400 {
401 /* See the comment at the ssb_is_early_boot definition */
402 if (!ssb_is_early_boot)
403 mutex_lock(&buses_mutex);
404 }
405
406 static void ssb_buses_unlock(void)
407 {
408 /* See the comment at the ssb_is_early_boot definition */
409 if (!ssb_is_early_boot)
410 mutex_unlock(&buses_mutex);
411 }
412
413 static void ssb_devices_unregister(struct ssb_bus *bus)
414 {
415 struct ssb_device *sdev;
416 int i;
417
418 for (i = bus->nr_devices - 1; i >= 0; i--) {
419 sdev = &(bus->devices[i]);
420 if (sdev->dev)
421 device_unregister(sdev->dev);
422 }
423 }
424
425 void ssb_bus_unregister(struct ssb_bus *bus)
426 {
427 ssb_buses_lock();
428 ssb_devices_unregister(bus);
429 list_del(&bus->list);
430 ssb_buses_unlock();
431
432 ssb_pcmcia_exit(bus);
433 ssb_pci_exit(bus);
434 ssb_iounmap(bus);
435 }
436 EXPORT_SYMBOL(ssb_bus_unregister);
437
438 static void ssb_release_dev(struct device *dev)
439 {
440 struct __ssb_dev_wrapper *devwrap;
441
442 devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
443 kfree(devwrap);
444 }
445
446 static int ssb_devices_register(struct ssb_bus *bus)
447 {
448 struct ssb_device *sdev;
449 struct device *dev;
450 struct __ssb_dev_wrapper *devwrap;
451 int i, err = 0;
452 int dev_idx = 0;
453
454 for (i = 0; i < bus->nr_devices; i++) {
455 sdev = &(bus->devices[i]);
456
457 /* We don't register SSB-system devices to the kernel,
458 * as the drivers for them are built into SSB. */
459 switch (sdev->id.coreid) {
460 case SSB_DEV_CHIPCOMMON:
461 case SSB_DEV_PCI:
462 case SSB_DEV_PCIE:
463 case SSB_DEV_PCMCIA:
464 case SSB_DEV_MIPS:
465 case SSB_DEV_MIPS_3302:
466 case SSB_DEV_EXTIF:
467 continue;
468 }
469
470 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
471 if (!devwrap) {
472 ssb_printk(KERN_ERR PFX
473 "Could not allocate device\n");
474 err = -ENOMEM;
475 goto error;
476 }
477 dev = &devwrap->dev;
478 devwrap->sdev = sdev;
479
480 dev->release = ssb_release_dev;
481 dev->bus = &ssb_bustype;
482 dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx);
483
484 switch (bus->bustype) {
485 case SSB_BUSTYPE_PCI:
486 #ifdef CONFIG_SSB_PCIHOST
487 sdev->irq = bus->host_pci->irq;
488 dev->parent = &bus->host_pci->dev;
489 #endif
490 break;
491 case SSB_BUSTYPE_PCMCIA:
492 #ifdef CONFIG_SSB_PCMCIAHOST
493 sdev->irq = bus->host_pcmcia->irq;
494 dev->parent = &bus->host_pcmcia->dev;
495 #endif
496 break;
497 case SSB_BUSTYPE_SDIO:
498 #ifdef CONFIG_SSB_SDIOHOST
499 dev->parent = &bus->host_sdio->dev;
500 #endif
501 break;
502 case SSB_BUSTYPE_SSB:
503 dev->dma_mask = &dev->coherent_dma_mask;
504 break;
505 }
506
507 sdev->dev = dev;
508 err = device_register(dev);
509 if (err) {
510 ssb_printk(KERN_ERR PFX
511 "Could not register %s\n",
512 dev_name(dev));
513 /* Set dev to NULL to not unregister
514 * dev on error unwinding. */
515 sdev->dev = NULL;
516 kfree(devwrap);
517 goto error;
518 }
519 dev_idx++;
520 }
521
522 return 0;
523 error:
524 /* Unwind the already registered devices. */
525 ssb_devices_unregister(bus);
526 return err;
527 }
528
529 /* Needs ssb_buses_lock() */
530 static int ssb_attach_queued_buses(void)
531 {
532 struct ssb_bus *bus, *n;
533 int err = 0;
534 int drop_them_all = 0;
535
536 list_for_each_entry_safe(bus, n, &attach_queue, list) {
537 if (drop_them_all) {
538 list_del(&bus->list);
539 continue;
540 }
541 /* Can't init the PCIcore in ssb_bus_register(), as that
542 * is too early in boot for embedded systems
543 * (no udelay() available). So do it here in attach stage.
544 */
545 err = ssb_bus_powerup(bus, 0);
546 if (err)
547 goto error;
548 ssb_pcicore_init(&bus->pcicore);
549 ssb_bus_may_powerdown(bus);
550
551 err = ssb_devices_register(bus);
552 error:
553 if (err) {
554 drop_them_all = 1;
555 list_del(&bus->list);
556 continue;
557 }
558 list_move_tail(&bus->list, &buses);
559 }
560
561 return err;
562 }
563
564 static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
565 {
566 struct ssb_bus *bus = dev->bus;
567
568 offset += dev->core_index * SSB_CORE_SIZE;
569 return readb(bus->mmio + offset);
570 }
571
572 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
573 {
574 struct ssb_bus *bus = dev->bus;
575
576 offset += dev->core_index * SSB_CORE_SIZE;
577 return readw(bus->mmio + offset);
578 }
579
580 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
581 {
582 struct ssb_bus *bus = dev->bus;
583
584 offset += dev->core_index * SSB_CORE_SIZE;
585 return readl(bus->mmio + offset);
586 }
587
588 #ifdef CONFIG_SSB_BLOCKIO
589 static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer,
590 size_t count, u16 offset, u8 reg_width)
591 {
592 struct ssb_bus *bus = dev->bus;
593 void __iomem *addr;
594
595 offset += dev->core_index * SSB_CORE_SIZE;
596 addr = bus->mmio + offset;
597
598 switch (reg_width) {
599 case sizeof(u8): {
600 u8 *buf = buffer;
601
602 while (count) {
603 *buf = __raw_readb(addr);
604 buf++;
605 count--;
606 }
607 break;
608 }
609 case sizeof(u16): {
610 __le16 *buf = buffer;
611
612 SSB_WARN_ON(count & 1);
613 while (count) {
614 *buf = (__force __le16)__raw_readw(addr);
615 buf++;
616 count -= 2;
617 }
618 break;
619 }
620 case sizeof(u32): {
621 __le32 *buf = buffer;
622
623 SSB_WARN_ON(count & 3);
624 while (count) {
625 *buf = (__force __le32)__raw_readl(addr);
626 buf++;
627 count -= 4;
628 }
629 break;
630 }
631 default:
632 SSB_WARN_ON(1);
633 }
634 }
635 #endif /* CONFIG_SSB_BLOCKIO */
636
637 static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
638 {
639 struct ssb_bus *bus = dev->bus;
640
641 offset += dev->core_index * SSB_CORE_SIZE;
642 writeb(value, bus->mmio + offset);
643 }
644
645 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
646 {
647 struct ssb_bus *bus = dev->bus;
648
649 offset += dev->core_index * SSB_CORE_SIZE;
650 writew(value, bus->mmio + offset);
651 }
652
653 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
654 {
655 struct ssb_bus *bus = dev->bus;
656
657 offset += dev->core_index * SSB_CORE_SIZE;
658 writel(value, bus->mmio + offset);
659 }
660
661 #ifdef CONFIG_SSB_BLOCKIO
662 static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer,
663 size_t count, u16 offset, u8 reg_width)
664 {
665 struct ssb_bus *bus = dev->bus;
666 void __iomem *addr;
667
668 offset += dev->core_index * SSB_CORE_SIZE;
669 addr = bus->mmio + offset;
670
671 switch (reg_width) {
672 case sizeof(u8): {
673 const u8 *buf = buffer;
674
675 while (count) {
676 __raw_writeb(*buf, addr);
677 buf++;
678 count--;
679 }
680 break;
681 }
682 case sizeof(u16): {
683 const __le16 *buf = buffer;
684
685 SSB_WARN_ON(count & 1);
686 while (count) {
687 __raw_writew((__force u16)(*buf), addr);
688 buf++;
689 count -= 2;
690 }
691 break;
692 }
693 case sizeof(u32): {
694 const __le32 *buf = buffer;
695
696 SSB_WARN_ON(count & 3);
697 while (count) {
698 __raw_writel((__force u32)(*buf), addr);
699 buf++;
700 count -= 4;
701 }
702 break;
703 }
704 default:
705 SSB_WARN_ON(1);
706 }
707 }
708 #endif /* CONFIG_SSB_BLOCKIO */
709
710 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
711 static const struct ssb_bus_ops ssb_ssb_ops = {
712 .read8 = ssb_ssb_read8,
713 .read16 = ssb_ssb_read16,
714 .read32 = ssb_ssb_read32,
715 .write8 = ssb_ssb_write8,
716 .write16 = ssb_ssb_write16,
717 .write32 = ssb_ssb_write32,
718 #ifdef CONFIG_SSB_BLOCKIO
719 .block_read = ssb_ssb_block_read,
720 .block_write = ssb_ssb_block_write,
721 #endif
722 };
723
724 static int ssb_fetch_invariants(struct ssb_bus *bus,
725 ssb_invariants_func_t get_invariants)
726 {
727 struct ssb_init_invariants iv;
728 int err;
729
730 memset(&iv, 0, sizeof(iv));
731 err = get_invariants(bus, &iv);
732 if (err)
733 goto out;
734 memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
735 memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
736 bus->has_cardbus_slot = iv.has_cardbus_slot;
737 out:
738 return err;
739 }
740
741 static int ssb_bus_register(struct ssb_bus *bus,
742 ssb_invariants_func_t get_invariants,
743 unsigned long baseaddr)
744 {
745 int err;
746
747 spin_lock_init(&bus->bar_lock);
748 INIT_LIST_HEAD(&bus->list);
749 #ifdef CONFIG_SSB_EMBEDDED
750 spin_lock_init(&bus->gpio_lock);
751 #endif
752
753 /* Powerup the bus */
754 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
755 if (err)
756 goto out;
757
758 /* Init SDIO-host device (if any), before the scan */
759 err = ssb_sdio_init(bus);
760 if (err)
761 goto err_disable_xtal;
762
763 ssb_buses_lock();
764 bus->busnumber = next_busnumber;
765 /* Scan for devices (cores) */
766 err = ssb_bus_scan(bus, baseaddr);
767 if (err)
768 goto err_sdio_exit;
769
770 /* Init PCI-host device (if any) */
771 err = ssb_pci_init(bus);
772 if (err)
773 goto err_unmap;
774 /* Init PCMCIA-host device (if any) */
775 err = ssb_pcmcia_init(bus);
776 if (err)
777 goto err_pci_exit;
778
779 /* Initialize basic system devices (if available) */
780 err = ssb_bus_powerup(bus, 0);
781 if (err)
782 goto err_pcmcia_exit;
783 ssb_chipcommon_init(&bus->chipco);
784 ssb_mipscore_init(&bus->mipscore);
785 err = ssb_fetch_invariants(bus, get_invariants);
786 if (err) {
787 ssb_bus_may_powerdown(bus);
788 goto err_pcmcia_exit;
789 }
790 ssb_bus_may_powerdown(bus);
791
792 /* Queue it for attach.
793 * See the comment at the ssb_is_early_boot definition. */
794 list_add_tail(&bus->list, &attach_queue);
795 if (!ssb_is_early_boot) {
796 /* This is not early boot, so we must attach the bus now */
797 err = ssb_attach_queued_buses();
798 if (err)
799 goto err_dequeue;
800 }
801 next_busnumber++;
802 ssb_buses_unlock();
803
804 out:
805 return err;
806
807 err_dequeue:
808 list_del(&bus->list);
809 err_pcmcia_exit:
810 ssb_pcmcia_exit(bus);
811 err_pci_exit:
812 ssb_pci_exit(bus);
813 err_unmap:
814 ssb_iounmap(bus);
815 err_sdio_exit:
816 ssb_sdio_exit(bus);
817 err_disable_xtal:
818 ssb_buses_unlock();
819 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
820 return err;
821 }
822
823 #ifdef CONFIG_SSB_PCIHOST
824 int ssb_bus_pcibus_register(struct ssb_bus *bus,
825 struct pci_dev *host_pci)
826 {
827 int err;
828
829 bus->bustype = SSB_BUSTYPE_PCI;
830 bus->host_pci = host_pci;
831 bus->ops = &ssb_pci_ops;
832
833 err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
834 if (!err) {
835 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
836 "PCI device %s\n", dev_name(&host_pci->dev));
837 } else {
838 ssb_printk(KERN_ERR PFX "Failed to register PCI version"
839 " of SSB with error %d\n", err);
840 }
841
842 return err;
843 }
844 EXPORT_SYMBOL(ssb_bus_pcibus_register);
845 #endif /* CONFIG_SSB_PCIHOST */
846
847 #ifdef CONFIG_SSB_PCMCIAHOST
848 int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
849 struct pcmcia_device *pcmcia_dev,
850 unsigned long baseaddr)
851 {
852 int err;
853
854 bus->bustype = SSB_BUSTYPE_PCMCIA;
855 bus->host_pcmcia = pcmcia_dev;
856 bus->ops = &ssb_pcmcia_ops;
857
858 err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
859 if (!err) {
860 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
861 "PCMCIA device %s\n", pcmcia_dev->devname);
862 }
863
864 return err;
865 }
866 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
867 #endif /* CONFIG_SSB_PCMCIAHOST */
868
869 #ifdef CONFIG_SSB_SDIOHOST
870 int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
871 unsigned int quirks)
872 {
873 int err;
874
875 bus->bustype = SSB_BUSTYPE_SDIO;
876 bus->host_sdio = func;
877 bus->ops = &ssb_sdio_ops;
878 bus->quirks = quirks;
879
880 err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
881 if (!err) {
882 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
883 "SDIO device %s\n", sdio_func_id(func));
884 }
885
886 return err;
887 }
888 EXPORT_SYMBOL(ssb_bus_sdiobus_register);
889 #endif /* CONFIG_SSB_PCMCIAHOST */
890
891 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
892 unsigned long baseaddr,
893 ssb_invariants_func_t get_invariants)
894 {
895 int err;
896
897 bus->bustype = SSB_BUSTYPE_SSB;
898 bus->ops = &ssb_ssb_ops;
899
900 err = ssb_bus_register(bus, get_invariants, baseaddr);
901 if (!err) {
902 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
903 "address 0x%08lX\n", baseaddr);
904 }
905
906 return err;
907 }
908
909 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
910 {
911 drv->drv.name = drv->name;
912 drv->drv.bus = &ssb_bustype;
913 drv->drv.owner = owner;
914
915 return driver_register(&drv->drv);
916 }
917 EXPORT_SYMBOL(__ssb_driver_register);
918
919 void ssb_driver_unregister(struct ssb_driver *drv)
920 {
921 driver_unregister(&drv->drv);
922 }
923 EXPORT_SYMBOL(ssb_driver_unregister);
924
925 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
926 {
927 struct ssb_bus *bus = dev->bus;
928 struct ssb_device *ent;
929 int i;
930
931 for (i = 0; i < bus->nr_devices; i++) {
932 ent = &(bus->devices[i]);
933 if (ent->id.vendor != dev->id.vendor)
934 continue;
935 if (ent->id.coreid != dev->id.coreid)
936 continue;
937
938 ent->devtypedata = data;
939 }
940 }
941 EXPORT_SYMBOL(ssb_set_devtypedata);
942
943 static u32 clkfactor_f6_resolve(u32 v)
944 {
945 /* map the magic values */
946 switch (v) {
947 case SSB_CHIPCO_CLK_F6_2:
948 return 2;
949 case SSB_CHIPCO_CLK_F6_3:
950 return 3;
951 case SSB_CHIPCO_CLK_F6_4:
952 return 4;
953 case SSB_CHIPCO_CLK_F6_5:
954 return 5;
955 case SSB_CHIPCO_CLK_F6_6:
956 return 6;
957 case SSB_CHIPCO_CLK_F6_7:
958 return 7;
959 }
960 return 0;
961 }
962
963 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
964 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
965 {
966 u32 n1, n2, clock, m1, m2, m3, mc;
967
968 n1 = (n & SSB_CHIPCO_CLK_N1);
969 n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
970
971 switch (plltype) {
972 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
973 if (m & SSB_CHIPCO_CLK_T6_MMASK)
974 return SSB_CHIPCO_CLK_T6_M0;
975 return SSB_CHIPCO_CLK_T6_M1;
976 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
977 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
978 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
979 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
980 n1 = clkfactor_f6_resolve(n1);
981 n2 += SSB_CHIPCO_CLK_F5_BIAS;
982 break;
983 case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
984 n1 += SSB_CHIPCO_CLK_T2_BIAS;
985 n2 += SSB_CHIPCO_CLK_T2_BIAS;
986 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
987 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
988 break;
989 case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
990 return 100000000;
991 default:
992 SSB_WARN_ON(1);
993 }
994
995 switch (plltype) {
996 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
997 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
998 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
999 break;
1000 default:
1001 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
1002 }
1003 if (!clock)
1004 return 0;
1005
1006 m1 = (m & SSB_CHIPCO_CLK_M1);
1007 m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
1008 m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
1009 mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
1010
1011 switch (plltype) {
1012 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
1013 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
1014 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
1015 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
1016 m1 = clkfactor_f6_resolve(m1);
1017 if ((plltype == SSB_PLLTYPE_1) ||
1018 (plltype == SSB_PLLTYPE_3))
1019 m2 += SSB_CHIPCO_CLK_F5_BIAS;
1020 else
1021 m2 = clkfactor_f6_resolve(m2);
1022 m3 = clkfactor_f6_resolve(m3);
1023
1024 switch (mc) {
1025 case SSB_CHIPCO_CLK_MC_BYPASS:
1026 return clock;
1027 case SSB_CHIPCO_CLK_MC_M1:
1028 return (clock / m1);
1029 case SSB_CHIPCO_CLK_MC_M1M2:
1030 return (clock / (m1 * m2));
1031 case SSB_CHIPCO_CLK_MC_M1M2M3:
1032 return (clock / (m1 * m2 * m3));
1033 case SSB_CHIPCO_CLK_MC_M1M3:
1034 return (clock / (m1 * m3));
1035 }
1036 return 0;
1037 case SSB_PLLTYPE_2:
1038 m1 += SSB_CHIPCO_CLK_T2_BIAS;
1039 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
1040 m3 += SSB_CHIPCO_CLK_T2_BIAS;
1041 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
1042 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
1043 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
1044
1045 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
1046 clock /= m1;
1047 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
1048 clock /= m2;
1049 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
1050 clock /= m3;
1051 return clock;
1052 default:
1053 SSB_WARN_ON(1);
1054 }
1055 return 0;
1056 }
1057
1058 /* Get the current speed the backplane is running at */
1059 u32 ssb_clockspeed(struct ssb_bus *bus)
1060 {
1061 u32 rate;
1062 u32 plltype;
1063 u32 clkctl_n, clkctl_m;
1064
1065 if (ssb_extif_available(&bus->extif))
1066 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
1067 &clkctl_n, &clkctl_m);
1068 else if (bus->chipco.dev)
1069 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
1070 &clkctl_n, &clkctl_m);
1071 else
1072 return 0;
1073
1074 if (bus->chip_id == 0x5365) {
1075 rate = 100000000;
1076 } else {
1077 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
1078 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
1079 rate /= 2;
1080 }
1081
1082 return rate;
1083 }
1084 EXPORT_SYMBOL(ssb_clockspeed);
1085
1086 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
1087 {
1088 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
1089
1090 /* The REJECT bit changed position in TMSLOW between
1091 * Backplane revisions. */
1092 switch (rev) {
1093 case SSB_IDLOW_SSBREV_22:
1094 return SSB_TMSLOW_REJECT_22;
1095 case SSB_IDLOW_SSBREV_23:
1096 return SSB_TMSLOW_REJECT_23;
1097 case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
1098 case SSB_IDLOW_SSBREV_25: /* same here */
1099 case SSB_IDLOW_SSBREV_26: /* same here */
1100 case SSB_IDLOW_SSBREV_27: /* same here */
1101 return SSB_TMSLOW_REJECT_23; /* this is a guess */
1102 default:
1103 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
1104 WARN_ON(1);
1105 }
1106 return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
1107 }
1108
1109 int ssb_device_is_enabled(struct ssb_device *dev)
1110 {
1111 u32 val;
1112 u32 reject;
1113
1114 reject = ssb_tmslow_reject_bitmask(dev);
1115 val = ssb_read32(dev, SSB_TMSLOW);
1116 val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
1117
1118 return (val == SSB_TMSLOW_CLOCK);
1119 }
1120 EXPORT_SYMBOL(ssb_device_is_enabled);
1121
1122 static void ssb_flush_tmslow(struct ssb_device *dev)
1123 {
1124 /* Make _really_ sure the device has finished the TMSLOW
1125 * register write transaction, as we risk running into
1126 * a machine check exception otherwise.
1127 * Do this by reading the register back to commit the
1128 * PCI write and delay an additional usec for the device
1129 * to react to the change. */
1130 ssb_read32(dev, SSB_TMSLOW);
1131 udelay(1);
1132 }
1133
1134 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
1135 {
1136 u32 val;
1137
1138 ssb_device_disable(dev, core_specific_flags);
1139 ssb_write32(dev, SSB_TMSLOW,
1140 SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
1141 SSB_TMSLOW_FGC | core_specific_flags);
1142 ssb_flush_tmslow(dev);
1143
1144 /* Clear SERR if set. This is a hw bug workaround. */
1145 if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
1146 ssb_write32(dev, SSB_TMSHIGH, 0);
1147
1148 val = ssb_read32(dev, SSB_IMSTATE);
1149 if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
1150 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
1151 ssb_write32(dev, SSB_IMSTATE, val);
1152 }
1153
1154 ssb_write32(dev, SSB_TMSLOW,
1155 SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
1156 core_specific_flags);
1157 ssb_flush_tmslow(dev);
1158
1159 ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
1160 core_specific_flags);
1161 ssb_flush_tmslow(dev);
1162 }
1163 EXPORT_SYMBOL(ssb_device_enable);
1164
1165 /* Wait for a bit in a register to get set or unset.
1166 * timeout is in units of ten-microseconds */
1167 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
1168 int timeout, int set)
1169 {
1170 int i;
1171 u32 val;
1172
1173 for (i = 0; i < timeout; i++) {
1174 val = ssb_read32(dev, reg);
1175 if (set) {
1176 if (val & bitmask)
1177 return 0;
1178 } else {
1179 if (!(val & bitmask))
1180 return 0;
1181 }
1182 udelay(10);
1183 }
1184 printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
1185 "register %04X to %s.\n",
1186 bitmask, reg, (set ? "set" : "clear"));
1187
1188 return -ETIMEDOUT;
1189 }
1190
1191 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
1192 {
1193 u32 reject;
1194
1195 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
1196 return;
1197
1198 reject = ssb_tmslow_reject_bitmask(dev);
1199 ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
1200 ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
1201 ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
1202 ssb_write32(dev, SSB_TMSLOW,
1203 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
1204 reject | SSB_TMSLOW_RESET |
1205 core_specific_flags);
1206 ssb_flush_tmslow(dev);
1207
1208 ssb_write32(dev, SSB_TMSLOW,
1209 reject | SSB_TMSLOW_RESET |
1210 core_specific_flags);
1211 ssb_flush_tmslow(dev);
1212 }
1213 EXPORT_SYMBOL(ssb_device_disable);
1214
1215 u32 ssb_dma_translation(struct ssb_device *dev)
1216 {
1217 switch (dev->bus->bustype) {
1218 case SSB_BUSTYPE_SSB:
1219 return 0;
1220 case SSB_BUSTYPE_PCI:
1221 return SSB_PCI_DMA;
1222 default:
1223 __ssb_dma_not_implemented(dev);
1224 }
1225 return 0;
1226 }
1227 EXPORT_SYMBOL(ssb_dma_translation);
1228
1229 int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
1230 {
1231 #ifdef CONFIG_SSB_PCIHOST
1232 int err;
1233 #endif
1234
1235 switch (dev->bus->bustype) {
1236 case SSB_BUSTYPE_PCI:
1237 #ifdef CONFIG_SSB_PCIHOST
1238 err = pci_set_dma_mask(dev->bus->host_pci, mask);
1239 if (err)
1240 return err;
1241 err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
1242 return err;
1243 #endif
1244 case SSB_BUSTYPE_SSB:
1245 return dma_set_mask(dev->dev, mask);
1246 default:
1247 __ssb_dma_not_implemented(dev);
1248 }
1249 return -ENOSYS;
1250 }
1251 EXPORT_SYMBOL(ssb_dma_set_mask);
1252
1253 void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
1254 dma_addr_t *dma_handle, gfp_t gfp_flags)
1255 {
1256 switch (dev->bus->bustype) {
1257 case SSB_BUSTYPE_PCI:
1258 #ifdef CONFIG_SSB_PCIHOST
1259 if (gfp_flags & GFP_DMA) {
1260 /* Workaround: The PCI API does not support passing
1261 * a GFP flag. */
1262 return dma_alloc_coherent(&dev->bus->host_pci->dev,
1263 size, dma_handle, gfp_flags);
1264 }
1265 return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
1266 #endif
1267 case SSB_BUSTYPE_SSB:
1268 return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
1269 default:
1270 __ssb_dma_not_implemented(dev);
1271 }
1272 return NULL;
1273 }
1274 EXPORT_SYMBOL(ssb_dma_alloc_consistent);
1275
1276 void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
1277 void *vaddr, dma_addr_t dma_handle,
1278 gfp_t gfp_flags)
1279 {
1280 switch (dev->bus->bustype) {
1281 case SSB_BUSTYPE_PCI:
1282 #ifdef CONFIG_SSB_PCIHOST
1283 if (gfp_flags & GFP_DMA) {
1284 /* Workaround: The PCI API does not support passing
1285 * a GFP flag. */
1286 dma_free_coherent(&dev->bus->host_pci->dev,
1287 size, vaddr, dma_handle);
1288 return;
1289 }
1290 pci_free_consistent(dev->bus->host_pci, size,
1291 vaddr, dma_handle);
1292 return;
1293 #endif
1294 case SSB_BUSTYPE_SSB:
1295 dma_free_coherent(dev->dev, size, vaddr, dma_handle);
1296 return;
1297 default:
1298 __ssb_dma_not_implemented(dev);
1299 }
1300 }
1301 EXPORT_SYMBOL(ssb_dma_free_consistent);
1302
1303 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1304 {
1305 struct ssb_chipcommon *cc;
1306 int err = 0;
1307
1308 /* On buses where more than one core may be working
1309 * at a time, we must not powerdown stuff if there are
1310 * still cores that may want to run. */
1311 if (bus->bustype == SSB_BUSTYPE_SSB)
1312 goto out;
1313
1314 cc = &bus->chipco;
1315
1316 if (!cc->dev)
1317 goto out;
1318 if (cc->dev->id.revision < 5)
1319 goto out;
1320
1321 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1322 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1323 if (err)
1324 goto error;
1325 out:
1326 #ifdef CONFIG_SSB_DEBUG
1327 bus->powered_up = 0;
1328 #endif
1329 return err;
1330 error:
1331 ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1332 goto out;
1333 }
1334 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1335
1336 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1337 {
1338 struct ssb_chipcommon *cc;
1339 int err;
1340 enum ssb_clkmode mode;
1341
1342 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1343 if (err)
1344 goto error;
1345 cc = &bus->chipco;
1346 mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1347 ssb_chipco_set_clockmode(cc, mode);
1348
1349 #ifdef CONFIG_SSB_DEBUG
1350 bus->powered_up = 1;
1351 #endif
1352 return 0;
1353 error:
1354 ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1355 return err;
1356 }
1357 EXPORT_SYMBOL(ssb_bus_powerup);
1358
1359 u32 ssb_admatch_base(u32 adm)
1360 {
1361 u32 base = 0;
1362
1363 switch (adm & SSB_ADM_TYPE) {
1364 case SSB_ADM_TYPE0:
1365 base = (adm & SSB_ADM_BASE0);
1366 break;
1367 case SSB_ADM_TYPE1:
1368 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1369 base = (adm & SSB_ADM_BASE1);
1370 break;
1371 case SSB_ADM_TYPE2:
1372 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1373 base = (adm & SSB_ADM_BASE2);
1374 break;
1375 default:
1376 SSB_WARN_ON(1);
1377 }
1378
1379 return base;
1380 }
1381 EXPORT_SYMBOL(ssb_admatch_base);
1382
1383 u32 ssb_admatch_size(u32 adm)
1384 {
1385 u32 size = 0;
1386
1387 switch (adm & SSB_ADM_TYPE) {
1388 case SSB_ADM_TYPE0:
1389 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1390 break;
1391 case SSB_ADM_TYPE1:
1392 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1393 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1394 break;
1395 case SSB_ADM_TYPE2:
1396 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1397 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1398 break;
1399 default:
1400 SSB_WARN_ON(1);
1401 }
1402 size = (1 << (size + 1));
1403
1404 return size;
1405 }
1406 EXPORT_SYMBOL(ssb_admatch_size);
1407
1408 static int __init ssb_modinit(void)
1409 {
1410 int err;
1411
1412 /* See the comment at the ssb_is_early_boot definition */
1413 ssb_is_early_boot = 0;
1414 err = bus_register(&ssb_bustype);
1415 if (err)
1416 return err;
1417
1418 /* Maybe we already registered some buses at early boot.
1419 * Check for this and attach them
1420 */
1421 ssb_buses_lock();
1422 err = ssb_attach_queued_buses();
1423 ssb_buses_unlock();
1424 if (err) {
1425 bus_unregister(&ssb_bustype);
1426 goto out;
1427 }
1428
1429 err = b43_pci_ssb_bridge_init();
1430 if (err) {
1431 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1432 "initialization failed\n");
1433 /* don't fail SSB init because of this */
1434 err = 0;
1435 }
1436 err = ssb_gige_init();
1437 if (err) {
1438 ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
1439 "driver initialization failed\n");
1440 /* don't fail SSB init because of this */
1441 err = 0;
1442 }
1443 out:
1444 return err;
1445 }
1446 /* ssb must be initialized after PCI but before the ssb drivers.
1447 * That means we must use some initcall between subsys_initcall
1448 * and device_initcall. */
1449 fs_initcall(ssb_modinit);
1450
1451 static void __exit ssb_modexit(void)
1452 {
1453 ssb_gige_exit();
1454 b43_pci_ssb_bridge_exit();
1455 bus_unregister(&ssb_bustype);
1456 }
1457 module_exit(ssb_modexit)
kbuild development tree