arch/arm/mach-footbridge/netwinder-hw.c

   1 /*
   2  * linux/arch/arm/mach-footbridge/netwinder-hw.c
   3  *
   4  * Netwinder machine fixup
   5  *
   6  * Copyright (C) 1998, 1999 Russell King, Phil Blundell
   7  */
   8 #include <linux/module.h>
   9 #include <linux/ioport.h>
  10 #include <linux/kernel.h>
  11 #include <linux/delay.h>
  12 #include <linux/init.h>
  13 #include <linux/io.h>
  14 #include <linux/spinlock.h>
  15
  16 #include <asm/hardware/dec21285.h>
  17 #include <asm/leds.h>
  18 #include <asm/mach-types.h>
  19 #include <asm/setup.h>
  20
  21 #include <asm/mach/arch.h>
  22
  23 #include "common.h"
  24
  25 #define IRDA_IO_BASE            0x180
  26 #define GP1_IO_BASE             0x338
  27 #define GP2_IO_BASE             0x33a
  28
  29
  30 #ifdef CONFIG_LEDS
  31 #define DEFAULT_LEDS    0
  32 #else
  33 #define DEFAULT_LEDS    GPIO_GREEN_LED
  34 #endif
  35
  36 /*
  37  * Winbond WB83977F accessibility stuff
  38  */
  39 static inline void wb977_open(void)
  40 {
  41         outb(0x87, 0x370);
  42         outb(0x87, 0x370);
  43 }
  44
  45 static inline void wb977_close(void)
  46 {
  47         outb(0xaa, 0x370);
  48 }
  49
  50 static inline void wb977_wb(int reg, int val)
  51 {
  52         outb(reg, 0x370);
  53         outb(val, 0x371);
  54 }
  55
  56 static inline void wb977_ww(int reg, int val)
  57 {
  58         outb(reg, 0x370);
  59         outb(val >> 8, 0x371);
  60         outb(reg + 1, 0x370);
  61         outb(val & 255, 0x371);
  62 }
  63
  64 #define wb977_device_select(dev)        wb977_wb(0x07, dev)
  65 #define wb977_device_disable()          wb977_wb(0x30, 0x00)
  66 #define wb977_device_enable()           wb977_wb(0x30, 0x01)
  67
  68 /*
  69  * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE
  70  */
  71 DEFINE_SPINLOCK(nw_gpio_lock);
  72 EXPORT_SYMBOL(nw_gpio_lock);
  73
  74 static unsigned int current_gpio_op;
  75 static unsigned int current_gpio_io;
  76 static unsigned int current_cpld;
  77
  78 void nw_gpio_modify_op(unsigned int mask, unsigned int set)
  79 {
  80         unsigned int new_gpio, changed;
  81
  82         new_gpio = (current_gpio_op & ~mask) | set;
  83         changed = new_gpio ^ current_gpio_op;
  84         current_gpio_op = new_gpio;
  85
  86         if (changed & 0xff)
  87                 outb(new_gpio, GP1_IO_BASE);
  88         if (changed & 0xff00)
  89                 outb(new_gpio >> 8, GP2_IO_BASE);
  90 }
  91 EXPORT_SYMBOL(nw_gpio_modify_op);
  92
  93 static inline void __gpio_modify_io(int mask, int in)
  94 {
  95         unsigned int new_gpio, changed;
  96         int port;
  97
  98         new_gpio = (current_gpio_io & ~mask) | in;
  99         changed = new_gpio ^ current_gpio_io;
 100         current_gpio_io = new_gpio;
 101
 102         changed >>= 1;
 103         new_gpio >>= 1;
 104
 105         wb977_device_select(7);
 106
 107         for (port = 0xe1; changed && port < 0xe8; changed >>= 1) {
 108                 wb977_wb(port, new_gpio & 1);
 109
 110                 port += 1;
 111                 new_gpio >>= 1;
 112         }
 113
 114         wb977_device_select(8);
 115
 116         for (port = 0xe8; changed && port < 0xec; changed >>= 1) {
 117                 wb977_wb(port, new_gpio & 1);
 118
 119                 port += 1;
 120                 new_gpio >>= 1;
 121         }
 122 }
 123
 124 void nw_gpio_modify_io(unsigned int mask, unsigned int in)
 125 {
 126         /* Open up the SuperIO chip */
 127         wb977_open();
 128
 129         __gpio_modify_io(mask, in);
 130
 131         /* Close up the EFER gate */
 132         wb977_close();
 133 }
 134 EXPORT_SYMBOL(nw_gpio_modify_io);
 135
 136 unsigned int nw_gpio_read(void)
 137 {
 138         return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8;
 139 }
 140 EXPORT_SYMBOL(nw_gpio_read);
 141
 142 /*
 143  * Initialise the Winbond W83977F global registers
 144  */
 145 static inline void wb977_init_global(void)
 146 {
 147         /*
 148          * Enable R/W config registers
 149          */
 150         wb977_wb(0x26, 0x40);
 151
 152         /*
 153          * Power down FDC (not used)
 154          */
 155         wb977_wb(0x22, 0xfe);
 156
 157         /*
 158          * GP12, GP11, CIRRX, IRRXH, GP10
 159          */
 160         wb977_wb(0x2a, 0xc1);
 161
 162         /*
 163          * GP23, GP22, GP21, GP20, GP13
 164          */
 165         wb977_wb(0x2b, 0x6b);
 166
 167         /*
 168          * GP17, GP16, GP15, GP14
 169          */
 170         wb977_wb(0x2c, 0x55);
 171 }
 172
 173 /*
 174  * Initialise the Winbond W83977F printer port
 175  */
 176 static inline void wb977_init_printer(void)
 177 {
 178         wb977_device_select(1);
 179
 180         /*
 181          * mode 1 == EPP
 182          */
 183         wb977_wb(0xf0, 0x01);
 184 }
 185
 186 /*
 187  * Initialise the Winbond W83977F keyboard controller
 188  */
 189 static inline void wb977_init_keyboard(void)
 190 {
 191         wb977_device_select(5);
 192
 193         /*
 194          * Keyboard controller address
 195          */
 196         wb977_ww(0x60, 0x0060);
 197         wb977_ww(0x62, 0x0064);
 198
 199         /*
 200          * Keyboard IRQ 1, active high, edge trigger
 201          */
 202         wb977_wb(0x70, 1);
 203         wb977_wb(0x71, 0x02);
 204
 205         /*
 206          * Mouse IRQ 5, active high, edge trigger
 207          */
 208         wb977_wb(0x72, 5);
 209         wb977_wb(0x73, 0x02);
 210
 211         /*
 212          * KBC 8MHz
 213          */
 214         wb977_wb(0xf0, 0x40);
 215
 216         /*
 217          * Enable device
 218          */
 219         wb977_device_enable();
 220 }
 221
 222 /*
 223  * Initialise the Winbond W83977F Infra-Red device
 224  */
 225 static inline void wb977_init_irda(void)
 226 {
 227         wb977_device_select(6);
 228
 229         /*
 230          * IR base address
 231          */
 232         wb977_ww(0x60, IRDA_IO_BASE);
 233
 234         /*
 235          * IRDA IRQ 6, active high, edge trigger
 236          */
 237         wb977_wb(0x70, 6);
 238         wb977_wb(0x71, 0x02);
 239
 240         /*
 241          * RX DMA - ISA DMA 0
 242          */
 243         wb977_wb(0x74, 0x00);
 244
 245         /*
 246          * TX DMA - Disable Tx DMA
 247          */
 248         wb977_wb(0x75, 0x04);
 249
 250         /*
 251          * Append CRC, Enable bank selection
 252          */
 253         wb977_wb(0xf0, 0x03);
 254
 255         /*
 256          * Enable device
 257          */
 258         wb977_device_enable();
 259 }
 260
 261 /*
 262  * Initialise Winbond W83977F general purpose IO
 263  */
 264 static inline void wb977_init_gpio(void)
 265 {
 266         unsigned long flags;
 267
 268         /*
 269          * Set up initial I/O definitions
 270          */
 271         current_gpio_io = -1;
 272         __gpio_modify_io(-1, GPIO_DONE | GPIO_WDTIMER);
 273
 274         wb977_device_select(7);
 275
 276         /*
 277          * Group1 base address
 278          */
 279         wb977_ww(0x60, GP1_IO_BASE);
 280         wb977_ww(0x62, 0);
 281         wb977_ww(0x64, 0);
 282
 283         /*
 284          * GP10 (Orage button) IRQ 10, active high, edge trigger
 285          */
 286         wb977_wb(0x70, 10);
 287         wb977_wb(0x71, 0x02);
 288
 289         /*
 290          * GP10: Debounce filter enabled, IRQ, input
 291          */
 292         wb977_wb(0xe0, 0x19);
 293
 294         /*
 295          * Enable Group1
 296          */
 297         wb977_device_enable();
 298
 299         wb977_device_select(8);
 300
 301         /*
 302          * Group2 base address
 303          */
 304         wb977_ww(0x60, GP2_IO_BASE);
 305
 306         /*
 307          * Clear watchdog timer regs
 308          *  - timer disable
 309          */
 310         wb977_wb(0xf2, 0x00);
 311
 312         /*
 313          *  - disable LED, no mouse nor keyboard IRQ
 314          */
 315         wb977_wb(0xf3, 0x00);
 316
 317         /*
 318          *  - timer counting, disable power LED, disable timeouot
 319          */
 320         wb977_wb(0xf4, 0x00);
 321
 322         /*
 323          * Enable group2
 324          */
 325         wb977_device_enable();
 326
 327         /*
 328          * Set Group1/Group2 outputs
 329          */
 330         spin_lock_irqsave(&nw_gpio_lock, flags);
 331         nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
 332         spin_unlock_irqrestore(&nw_gpio_lock, flags);
 333 }
 334
 335 /*
 336  * Initialise the Winbond W83977F chip.
 337  */
 338 static void __init wb977_init(void)
 339 {
 340         request_region(0x370, 2, "W83977AF configuration");
 341
 342         /*
 343          * Open up the SuperIO chip
 344          */
 345         wb977_open();
 346
 347         /*
 348          * Initialise the global registers
 349          */
 350         wb977_init_global();
 351
 352         /*
 353          * Initialise the various devices in
 354          * the multi-IO chip.
 355          */
 356         wb977_init_printer();
 357         wb977_init_keyboard();
 358         wb977_init_irda();
 359         wb977_init_gpio();
 360
 361         /*
 362          * Close up the EFER gate
 363          */
 364         wb977_close();
 365 }
 366
 367 void nw_cpld_modify(unsigned int mask, unsigned int set)
 368 {
 369         int msk;
 370
 371         current_cpld = (current_cpld & ~mask) | set;
 372
 373         nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
 374         nw_gpio_modify_op(GPIO_IOLOAD, 0);
 375
 376         for (msk = 8; msk; msk >>= 1) {
 377                 int bit = current_cpld & msk;
 378
 379                 nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
 380                 nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
 381         }
 382
 383         nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
 384         nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
 385         nw_gpio_modify_op(GPIO_IOLOAD, 0);
 386 }
 387 EXPORT_SYMBOL(nw_cpld_modify);
 388
 389 static void __init cpld_init(void)
 390 {
 391         unsigned long flags;
 392
 393         spin_lock_irqsave(&nw_gpio_lock, flags);
 394         nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
 395         spin_unlock_irqrestore(&nw_gpio_lock, flags);
 396 }
 397
 398 static unsigned char rwa_unlock[] __initdata =
 399 { 0x00, 0x00, 0x6a, 0xb5, 0xda, 0xed, 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b,
 400   0x0d, 0x86, 0xc3, 0x61, 0xb0, 0x58, 0x2c, 0x16, 0x8b, 0x45, 0xa2, 0xd1, 0xe8, 0x74,
 401   0x3a, 0x9d, 0xce, 0xe7, 0x73, 0x39 };
 402
 403 #ifndef DEBUG
 404 #define dprintk(x...)
 405 #else
 406 #define dprintk(x...) printk(x)
 407 #endif
 408
 409 #define WRITE_RWA(r,v) do { outb((r), 0x279); udelay(10); outb((v), 0xa79); } while (0)
 410
 411 static inline void rwa010_unlock(void)
 412 {
 413         int i;
 414
 415         WRITE_RWA(2, 2);
 416         mdelay(10);
 417
 418         for (i = 0; i < sizeof(rwa_unlock); i++) {
 419                 outb(rwa_unlock[i], 0x279);
 420                 udelay(10);
 421         }
 422 }
 423
 424 static inline void rwa010_read_ident(void)
 425 {
 426         unsigned char si[9];
 427         int i, j;
 428
 429         WRITE_RWA(3, 0);
 430         WRITE_RWA(0, 128);
 431
 432         outb(1, 0x279);
 433
 434         mdelay(1);
 435
 436         dprintk("Identifier: ");
 437         for (i = 0; i < 9; i++) {
 438                 si[i] = 0;
 439                 for (j = 0; j < 8; j++) {
 440                         int bit;
 441                         udelay(250);
 442                         inb(0x203);
 443                         udelay(250);
 444                         bit = inb(0x203);
 445                         dprintk("%02X ", bit);
 446                         bit = (bit == 0xaa) ? 1 : 0;
 447                         si[i] |= bit << j;
 448                 }
 449                 dprintk("(%02X) ", si[i]);
 450         }
 451         dprintk("\n");
 452 }
 453
 454 static inline void rwa010_global_init(void)
 455 {
 456         WRITE_RWA(6, 2);        // Assign a card no = 2
 457
 458         dprintk("Card no = %d\n", inb(0x203));
 459
 460         /* disable the modem section of the chip */
 461         WRITE_RWA(7, 3);
 462         WRITE_RWA(0x30, 0);
 463
 464         /* disable the cdrom section of the chip */
 465         WRITE_RWA(7, 4);
 466         WRITE_RWA(0x30, 0);
 467
 468         /* disable the MPU-401 section of the chip */
 469         WRITE_RWA(7, 2);
 470         WRITE_RWA(0x30, 0);
 471 }
 472
 473 static inline void rwa010_game_port_init(void)
 474 {
 475         int i;
 476
 477         WRITE_RWA(7, 5);
 478
 479         dprintk("Slider base: ");
 480         WRITE_RWA(0x61, 1);
 481         i = inb(0x203);
 482
 483         WRITE_RWA(0x60, 2);
 484         dprintk("%02X%02X (201)\n", inb(0x203), i);
 485
 486         WRITE_RWA(0x30, 1);
 487 }
 488
 489 static inline void rwa010_waveartist_init(int base, int irq, int dma)
 490 {
 491         int i;
 492
 493         WRITE_RWA(7, 0);
 494
 495         dprintk("WaveArtist base: ");
 496         WRITE_RWA(0x61, base & 255);
 497         i = inb(0x203);
 498
 499         WRITE_RWA(0x60, base >> 8);
 500         dprintk("%02X%02X (%X),", inb(0x203), i, base);
 501
 502         WRITE_RWA(0x70, irq);
 503         dprintk(" irq: %d (%d),", inb(0x203), irq);
 504
 505         WRITE_RWA(0x74, dma);
 506         dprintk(" dma: %d (%d)\n", inb(0x203), dma);
 507
 508         WRITE_RWA(0x30, 1);
 509 }
 510
 511 static inline void rwa010_soundblaster_init(int sb_base, int al_base, int irq, int dma)
 512 {
 513         int i;
 514
 515         WRITE_RWA(7, 1);
 516
 517         dprintk("SoundBlaster base: ");
 518         WRITE_RWA(0x61, sb_base & 255);
 519         i = inb(0x203);
 520
 521         WRITE_RWA(0x60, sb_base >> 8);
 522         dprintk("%02X%02X (%X),", inb(0x203), i, sb_base);
 523
 524         dprintk(" irq: ");
 525         WRITE_RWA(0x70, irq);
 526         dprintk("%d (%d),", inb(0x203), irq);
 527
 528         dprintk(" 8-bit DMA: ");
 529         WRITE_RWA(0x74, dma);
 530         dprintk("%d (%d)\n", inb(0x203), dma);
 531
 532         dprintk("AdLib base: ");
 533         WRITE_RWA(0x63, al_base & 255);
 534         i = inb(0x203);
 535
 536         WRITE_RWA(0x62, al_base >> 8);
 537         dprintk("%02X%02X (%X)\n", inb(0x203), i, al_base);
 538
 539         WRITE_RWA(0x30, 1);
 540 }
 541
 542 static void rwa010_soundblaster_reset(void)
 543 {
 544         int i;
 545
 546         outb(1, 0x226);
 547         udelay(3);
 548         outb(0, 0x226);
 549
 550         for (i = 0; i < 5; i++) {
 551                 if (inb(0x22e) & 0x80)
 552                         break;
 553                 mdelay(1);
 554         }
 555         if (i == 5)
 556                 printk("SoundBlaster: DSP reset failed\n");
 557
 558         dprintk("SoundBlaster DSP reset: %02X (AA)\n", inb(0x22a));
 559
 560         for (i = 0; i < 5; i++) {
 561                 if ((inb(0x22c) & 0x80) == 0)
 562                         break;
 563                 mdelay(1);
 564         }
 565
 566         if (i == 5)
 567                 printk("SoundBlaster: DSP not ready\n");
 568         else {
 569                 outb(0xe1, 0x22c);
 570
 571                 dprintk("SoundBlaster DSP id: ");
 572                 i = inb(0x22a);
 573                 udelay(1);
 574                 i |= inb(0x22a) << 8;
 575                 dprintk("%04X\n", i);
 576
 577                 for (i = 0; i < 5; i++) {
 578                         if ((inb(0x22c) & 0x80) == 0)
 579                                 break;
 580                         mdelay(1);
 581                 }
 582
 583                 if (i == 5)
 584                         printk("SoundBlaster: could not turn speaker off\n");
 585
 586                 outb(0xd3, 0x22c);
 587         }
 588
 589         /* turn on OPL3 */
 590         outb(5, 0x38a);
 591         outb(1, 0x38b);
 592 }
 593
 594 static void __init rwa010_init(void)
 595 {
 596         rwa010_unlock();
 597         rwa010_read_ident();
 598         rwa010_global_init();
 599         rwa010_game_port_init();
 600         rwa010_waveartist_init(0x250, 3, 7);
 601         rwa010_soundblaster_init(0x220, 0x388, 3, 1);
 602         rwa010_soundblaster_reset();
 603 }
 604
 605 /*
 606  * Initialise any other hardware after we've got the PCI bus
 607  * initialised.  We may need the PCI bus to talk to this other
 608  * hardware.
 609  */
 610 static int __init nw_hw_init(void)
 611 {
 612         if (machine_is_netwinder()) {
 613                 unsigned long flags;
 614
 615                 wb977_init();
 616                 cpld_init();
 617                 rwa010_init();
 618
 619                 spin_lock_irqsave(&nw_gpio_lock, flags);
 620                 nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
 621                 spin_unlock_irqrestore(&nw_gpio_lock, flags);
 622         }
 623         return 0;
 624 }
 625
 626 __initcall(nw_hw_init);
 627
 628 /*
 629  * Older NeTTroms either do not provide a parameters
 630  * page, or they don't supply correct information in
 631  * the parameter page.
 632  */
 633 static void __init
 634 fixup_netwinder(struct machine_desc *desc, struct tag *tags,
 635                 char **cmdline, struct meminfo *mi)
 636 {
 637 #ifdef CONFIG_ISAPNP
 638         extern int isapnp_disable;
 639
 640         /*
 641          * We must not use the kernels ISAPnP code
 642          * on the NetWinder - it will reset the settings
 643          * for the WaveArtist chip and render it inoperable.
 644          */
 645         isapnp_disable = 1;
 646 #endif
 647 }
 648
 649 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 650         /* Maintainer: Russell King/Rebel.com */
 651         .boot_params    = 0x00000100,
 652         .video_start    = 0x000a0000,
 653         .video_end      = 0x000bffff,
 654         .reserve_lp0    = 1,
 655         .reserve_lp2    = 1,
 656         .fixup          = fixup_netwinder,
 657         .map_io         = footbridge_map_io,
 658         .init_irq       = footbridge_init_irq,
 659         .timer          = &isa_timer,
 660 MACHINE_END