2 * PS3 gelic network driver.
4 * Copyright (C) 2007 Sony Computer Entertainment Inc.
5 * Copyright 2006, 2007 Sony Corporation
7 * This file is based on: spider_net.c
9 * (C) Copyright IBM Corp. 2005
11 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
12 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2, or (at your option)
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
31 #include <linux/kernel.h>
32 #include <linux/module.h>
34 #include <linux/etherdevice.h>
35 #include <linux/ethtool.h>
36 #include <linux/if_vlan.h>
40 #include <linux/tcp.h>
42 #include <linux/dma-mapping.h>
43 #include <net/checksum.h>
44 #include <asm/firmware.h>
46 #include <asm/lv1call.h>
48 #include "ps3_gelic_net.h"
49 #include "ps3_gelic_wireless.h"
51 #define DRV_NAME "Gelic Network Driver"
52 #define DRV_VERSION "2.0"
54 MODULE_AUTHOR("SCE Inc.");
55 MODULE_DESCRIPTION("Gelic Network driver");
56 MODULE_LICENSE("GPL");
59 static inline void gelic_card_enable_rxdmac(struct gelic_card
*card
);
60 static inline void gelic_card_disable_rxdmac(struct gelic_card
*card
);
61 static inline void gelic_card_disable_txdmac(struct gelic_card
*card
);
62 static inline void gelic_card_reset_chain(struct gelic_card
*card
,
63 struct gelic_descr_chain
*chain
,
64 struct gelic_descr
*start_descr
);
67 int gelic_card_set_irq_mask(struct gelic_card
*card
, u64 mask
)
71 status
= lv1_net_set_interrupt_mask(bus_id(card
), dev_id(card
),
74 dev_info(ctodev(card
),
75 "%s failed %d\n", __func__
, status
);
79 static inline void gelic_card_rx_irq_on(struct gelic_card
*card
)
81 card
->irq_mask
|= GELIC_CARD_RXINT
;
82 gelic_card_set_irq_mask(card
, card
->irq_mask
);
84 static inline void gelic_card_rx_irq_off(struct gelic_card
*card
)
86 card
->irq_mask
&= ~GELIC_CARD_RXINT
;
87 gelic_card_set_irq_mask(card
, card
->irq_mask
);
90 static void gelic_card_get_ether_port_status(struct gelic_card
*card
,
94 struct net_device
*ether_netdev
;
96 lv1_net_control(bus_id(card
), dev_id(card
),
97 GELIC_LV1_GET_ETH_PORT_STATUS
,
98 GELIC_LV1_VLAN_TX_ETHERNET_0
, 0, 0,
99 &card
->ether_port_status
, &v2
);
102 ether_netdev
= card
->netdev
[GELIC_PORT_ETHERNET_0
];
103 if (card
->ether_port_status
& GELIC_LV1_ETHER_LINK_UP
)
104 netif_carrier_on(ether_netdev
);
106 netif_carrier_off(ether_netdev
);
110 static int gelic_card_set_link_mode(struct gelic_card
*card
, int mode
)
115 status
= lv1_net_control(bus_id(card
), dev_id(card
),
116 GELIC_LV1_SET_NEGOTIATION_MODE
,
117 GELIC_LV1_PHY_ETHERNET_0
, mode
, 0, &v1
, &v2
);
119 pr_info("%s: failed setting negotiation mode %d\n", __func__
,
124 card
->link_mode
= mode
;
128 void gelic_card_up(struct gelic_card
*card
)
130 pr_debug("%s: called\n", __func__
);
131 mutex_lock(&card
->updown_lock
);
132 if (atomic_inc_return(&card
->users
) == 1) {
133 pr_debug("%s: real do\n", __func__
);
135 gelic_card_set_irq_mask(card
, card
->irq_mask
);
137 gelic_card_enable_rxdmac(card
);
139 napi_enable(&card
->napi
);
141 mutex_unlock(&card
->updown_lock
);
142 pr_debug("%s: done\n", __func__
);
145 void gelic_card_down(struct gelic_card
*card
)
148 pr_debug("%s: called\n", __func__
);
149 mutex_lock(&card
->updown_lock
);
150 if (atomic_dec_if_positive(&card
->users
) == 0) {
151 pr_debug("%s: real do\n", __func__
);
152 napi_disable(&card
->napi
);
154 * Disable irq. Wireless interrupts will
155 * be disabled later if any
157 mask
= card
->irq_mask
& (GELIC_CARD_WLAN_EVENT_RECEIVED
|
158 GELIC_CARD_WLAN_COMMAND_COMPLETED
);
159 gelic_card_set_irq_mask(card
, mask
);
161 gelic_card_disable_rxdmac(card
);
162 gelic_card_reset_chain(card
, &card
->rx_chain
,
163 card
->descr
+ GELIC_NET_TX_DESCRIPTORS
);
165 gelic_card_disable_txdmac(card
);
167 mutex_unlock(&card
->updown_lock
);
168 pr_debug("%s: done\n", __func__
);
172 * gelic_descr_get_status -- returns the status of a descriptor
173 * @descr: descriptor to look at
175 * returns the status as in the dmac_cmd_status field of the descriptor
177 static enum gelic_descr_dma_status
178 gelic_descr_get_status(struct gelic_descr
*descr
)
180 return be32_to_cpu(descr
->dmac_cmd_status
) & GELIC_DESCR_DMA_STAT_MASK
;
184 * gelic_descr_set_status -- sets the status of a descriptor
185 * @descr: descriptor to change
186 * @status: status to set in the descriptor
188 * changes the status to the specified value. Doesn't change other bits
191 static void gelic_descr_set_status(struct gelic_descr
*descr
,
192 enum gelic_descr_dma_status status
)
194 descr
->dmac_cmd_status
= cpu_to_be32(status
|
195 (be32_to_cpu(descr
->dmac_cmd_status
) &
196 ~GELIC_DESCR_DMA_STAT_MASK
));
198 * dma_cmd_status field is used to indicate whether the descriptor
200 * Usually caller of this function wants to inform that to the
201 * hardware, so we assure here the hardware sees the change.
207 * gelic_card_free_chain - free descriptor chain
208 * @card: card structure
209 * @descr_in: address of desc
211 static void gelic_card_free_chain(struct gelic_card
*card
,
212 struct gelic_descr
*descr_in
)
214 struct gelic_descr
*descr
;
216 for (descr
= descr_in
; descr
&& descr
->bus_addr
; descr
= descr
->next
) {
217 dma_unmap_single(ctodev(card
), descr
->bus_addr
,
218 GELIC_DESCR_SIZE
, DMA_BIDIRECTIONAL
);
224 * gelic_card_init_chain - links descriptor chain
225 * @card: card structure
226 * @chain: address of chain
227 * @start_descr: address of descriptor array
228 * @no: number of descriptors
230 * we manage a circular list that mirrors the hardware structure,
231 * except that the hardware uses bus addresses.
233 * returns 0 on success, <0 on failure
235 static int __devinit
gelic_card_init_chain(struct gelic_card
*card
,
236 struct gelic_descr_chain
*chain
,
237 struct gelic_descr
*start_descr
,
241 struct gelic_descr
*descr
;
244 memset(descr
, 0, sizeof(*descr
) * no
);
246 /* set up the hardware pointers in each descriptor */
247 for (i
= 0; i
< no
; i
++, descr
++) {
248 gelic_descr_set_status(descr
, GELIC_DESCR_DMA_NOT_IN_USE
);
250 dma_map_single(ctodev(card
), descr
,
254 if (!descr
->bus_addr
)
257 descr
->next
= descr
+ 1;
258 descr
->prev
= descr
- 1;
260 /* make them as ring */
261 (descr
- 1)->next
= start_descr
;
262 start_descr
->prev
= (descr
- 1);
264 /* chain bus addr of hw descriptor */
266 for (i
= 0; i
< no
; i
++, descr
++) {
267 descr
->next_descr_addr
= cpu_to_be32(descr
->next
->bus_addr
);
270 chain
->head
= start_descr
;
271 chain
->tail
= start_descr
;
273 /* do not chain last hw descriptor */
274 (descr
- 1)->next_descr_addr
= 0;
279 for (i
--, descr
--; 0 <= i
; i
--, descr
--)
281 dma_unmap_single(ctodev(card
), descr
->bus_addr
,
288 * gelic_card_reset_chain - reset status of a descriptor chain
289 * @card: card structure
290 * @chain: address of chain
291 * @start_descr: address of descriptor array
293 * Reset the status of dma descriptors to ready state
294 * and re-initialize the hardware chain for later use
296 static void gelic_card_reset_chain(struct gelic_card
*card
,
297 struct gelic_descr_chain
*chain
,
298 struct gelic_descr
*start_descr
)
300 struct gelic_descr
*descr
;
302 for (descr
= start_descr
; start_descr
!= descr
->next
; descr
++) {
303 gelic_descr_set_status(descr
, GELIC_DESCR_DMA_CARDOWNED
);
304 descr
->next_descr_addr
= cpu_to_be32(descr
->next
->bus_addr
);
307 chain
->head
= start_descr
;
308 chain
->tail
= (descr
- 1);
310 (descr
- 1)->next_descr_addr
= 0;
313 * gelic_descr_prepare_rx - reinitializes a rx descriptor
314 * @card: card structure
315 * @descr: descriptor to re-init
317 * return 0 on success, <0 on failure
319 * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
320 * Activate the descriptor state-wise
322 static int gelic_descr_prepare_rx(struct gelic_card
*card
,
323 struct gelic_descr
*descr
)
326 unsigned int bufsize
;
328 if (gelic_descr_get_status(descr
) != GELIC_DESCR_DMA_NOT_IN_USE
)
329 dev_info(ctodev(card
), "%s: ERROR status \n", __func__
);
330 /* we need to round up the buffer size to a multiple of 128 */
331 bufsize
= ALIGN(GELIC_NET_MAX_MTU
, GELIC_NET_RXBUF_ALIGN
);
333 /* and we need to have it 128 byte aligned, therefore we allocate a
335 descr
->skb
= dev_alloc_skb(bufsize
+ GELIC_NET_RXBUF_ALIGN
- 1);
337 descr
->buf_addr
= 0; /* tell DMAC don't touch memory */
338 dev_info(ctodev(card
),
339 "%s:allocate skb failed !!\n", __func__
);
342 descr
->buf_size
= cpu_to_be32(bufsize
);
343 descr
->dmac_cmd_status
= 0;
344 descr
->result_size
= 0;
345 descr
->valid_size
= 0;
346 descr
->data_error
= 0;
348 offset
= ((unsigned long)descr
->skb
->data
) &
349 (GELIC_NET_RXBUF_ALIGN
- 1);
351 skb_reserve(descr
->skb
, GELIC_NET_RXBUF_ALIGN
- offset
);
352 /* io-mmu-map the skb */
353 descr
->buf_addr
= cpu_to_be32(dma_map_single(ctodev(card
),
357 if (!descr
->buf_addr
) {
358 dev_kfree_skb_any(descr
->skb
);
360 dev_info(ctodev(card
),
361 "%s:Could not iommu-map rx buffer\n", __func__
);
362 gelic_descr_set_status(descr
, GELIC_DESCR_DMA_NOT_IN_USE
);
365 gelic_descr_set_status(descr
, GELIC_DESCR_DMA_CARDOWNED
);
371 * gelic_card_release_rx_chain - free all skb of rx descr
372 * @card: card structure
375 static void gelic_card_release_rx_chain(struct gelic_card
*card
)
377 struct gelic_descr
*descr
= card
->rx_chain
.head
;
381 dma_unmap_single(ctodev(card
),
382 be32_to_cpu(descr
->buf_addr
),
386 dev_kfree_skb_any(descr
->skb
);
388 gelic_descr_set_status(descr
,
389 GELIC_DESCR_DMA_NOT_IN_USE
);
392 } while (descr
!= card
->rx_chain
.head
);
396 * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
397 * @card: card structure
399 * fills all descriptors in the rx chain: allocates skbs
400 * and iommu-maps them.
401 * returns 0 on success, < 0 on failure
403 static int gelic_card_fill_rx_chain(struct gelic_card
*card
)
405 struct gelic_descr
*descr
= card
->rx_chain
.head
;
410 ret
= gelic_descr_prepare_rx(card
, descr
);
415 } while (descr
!= card
->rx_chain
.head
);
419 gelic_card_release_rx_chain(card
);
424 * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
425 * @card: card structure
427 * returns 0 on success, < 0 on failure
429 static int __devinit
gelic_card_alloc_rx_skbs(struct gelic_card
*card
)
431 struct gelic_descr_chain
*chain
;
433 chain
= &card
->rx_chain
;
434 ret
= gelic_card_fill_rx_chain(card
);
435 chain
->tail
= card
->rx_top
->prev
; /* point to the last */
440 * gelic_descr_release_tx - processes a used tx descriptor
441 * @card: card structure
442 * @descr: descriptor to release
444 * releases a used tx descriptor (unmapping, freeing of skb)
446 static void gelic_descr_release_tx(struct gelic_card
*card
,
447 struct gelic_descr
*descr
)
449 struct sk_buff
*skb
= descr
->skb
;
451 BUG_ON(!(be32_to_cpu(descr
->data_status
) & GELIC_DESCR_TX_TAIL
));
453 dma_unmap_single(ctodev(card
), be32_to_cpu(descr
->buf_addr
), skb
->len
,
455 dev_kfree_skb_any(skb
);
459 descr
->next_descr_addr
= 0;
460 descr
->result_size
= 0;
461 descr
->valid_size
= 0;
462 descr
->data_status
= 0;
463 descr
->data_error
= 0;
466 /* set descr status */
467 gelic_descr_set_status(descr
, GELIC_DESCR_DMA_NOT_IN_USE
);
470 static void gelic_card_stop_queues(struct gelic_card
*card
)
472 netif_stop_queue(card
->netdev
[GELIC_PORT_ETHERNET_0
]);
474 if (card
->netdev
[GELIC_PORT_WIRELESS
])
475 netif_stop_queue(card
->netdev
[GELIC_PORT_WIRELESS
]);
477 static void gelic_card_wake_queues(struct gelic_card
*card
)
479 netif_wake_queue(card
->netdev
[GELIC_PORT_ETHERNET_0
]);
481 if (card
->netdev
[GELIC_PORT_WIRELESS
])
482 netif_wake_queue(card
->netdev
[GELIC_PORT_WIRELESS
]);
485 * gelic_card_release_tx_chain - processes sent tx descriptors
486 * @card: adapter structure
487 * @stop: net_stop sequence
489 * releases the tx descriptors that gelic has finished with
491 static void gelic_card_release_tx_chain(struct gelic_card
*card
, int stop
)
493 struct gelic_descr_chain
*tx_chain
;
494 enum gelic_descr_dma_status status
;
495 struct net_device
*netdev
;
498 for (tx_chain
= &card
->tx_chain
;
499 tx_chain
->head
!= tx_chain
->tail
&& tx_chain
->tail
;
500 tx_chain
->tail
= tx_chain
->tail
->next
) {
501 status
= gelic_descr_get_status(tx_chain
->tail
);
502 netdev
= tx_chain
->tail
->skb
->dev
;
504 case GELIC_DESCR_DMA_RESPONSE_ERROR
:
505 case GELIC_DESCR_DMA_PROTECTION_ERROR
:
506 case GELIC_DESCR_DMA_FORCE_END
:
507 if (printk_ratelimit())
508 dev_info(ctodev(card
),
509 "%s: forcing end of tx descriptor " \
512 netdev
->stats
.tx_dropped
++;
515 case GELIC_DESCR_DMA_COMPLETE
:
516 if (tx_chain
->tail
->skb
) {
517 netdev
->stats
.tx_packets
++;
518 netdev
->stats
.tx_bytes
+=
519 tx_chain
->tail
->skb
->len
;
523 case GELIC_DESCR_DMA_CARDOWNED
:
524 /* pending tx request */
526 /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
530 gelic_descr_release_tx(card
, tx_chain
->tail
);
534 if (!stop
&& release
)
535 gelic_card_wake_queues(card
);
539 * gelic_net_set_multi - sets multicast addresses and promisc flags
540 * @netdev: interface device structure
542 * gelic_net_set_multi configures multicast addresses as needed for the
543 * netdev interface. It also sets up multicast, allmulti and promisc
544 * flags appropriately
546 void gelic_net_set_multi(struct net_device
*netdev
)
548 struct gelic_card
*card
= netdev_card(netdev
);
549 struct dev_mc_list
*mc
;
555 /* clear all multicast address */
556 status
= lv1_net_remove_multicast_address(bus_id(card
), dev_id(card
),
559 dev_err(ctodev(card
),
560 "lv1_net_remove_multicast_address failed %d\n",
562 /* set broadcast address */
563 status
= lv1_net_add_multicast_address(bus_id(card
), dev_id(card
),
564 GELIC_NET_BROADCAST_ADDR
, 0);
566 dev_err(ctodev(card
),
567 "lv1_net_add_multicast_address failed, %d\n",
570 if ((netdev
->flags
& IFF_ALLMULTI
) ||
571 (netdev
->mc_count
> GELIC_NET_MC_COUNT_MAX
)) {
572 status
= lv1_net_add_multicast_address(bus_id(card
),
576 dev_err(ctodev(card
),
577 "lv1_net_add_multicast_address failed, %d\n",
582 /* set multicast addresses */
583 for (mc
= netdev
->mc_list
; mc
; mc
= mc
->next
) {
586 for (i
= 0; i
< ETH_ALEN
; i
++) {
590 status
= lv1_net_add_multicast_address(bus_id(card
),
594 dev_err(ctodev(card
),
595 "lv1_net_add_multicast_address failed, %d\n",
601 * gelic_card_enable_rxdmac - enables the receive DMA controller
602 * @card: card structure
604 * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
605 * in the GDADMACCNTR register
607 static inline void gelic_card_enable_rxdmac(struct gelic_card
*card
)
612 if (gelic_descr_get_status(card
->rx_chain
.head
) !=
613 GELIC_DESCR_DMA_CARDOWNED
) {
614 printk(KERN_ERR
"%s: status=%x\n", __func__
,
615 be32_to_cpu(card
->rx_chain
.head
->dmac_cmd_status
));
616 printk(KERN_ERR
"%s: nextphy=%x\n", __func__
,
617 be32_to_cpu(card
->rx_chain
.head
->next_descr_addr
));
618 printk(KERN_ERR
"%s: head=%p\n", __func__
,
619 card
->rx_chain
.head
);
622 status
= lv1_net_start_rx_dma(bus_id(card
), dev_id(card
),
623 card
->rx_chain
.head
->bus_addr
, 0);
625 dev_info(ctodev(card
),
626 "lv1_net_start_rx_dma failed, status=%d\n", status
);
630 * gelic_card_disable_rxdmac - disables the receive DMA controller
631 * @card: card structure
633 * gelic_card_disable_rxdmac terminates processing on the DMA controller by
634 * turing off DMA and issueing a force end
636 static inline void gelic_card_disable_rxdmac(struct gelic_card
*card
)
640 /* this hvc blocks until the DMA in progress really stopped */
641 status
= lv1_net_stop_rx_dma(bus_id(card
), dev_id(card
), 0);
643 dev_err(ctodev(card
),
644 "lv1_net_stop_rx_dma faild, %d\n", status
);
648 * gelic_card_disable_txdmac - disables the transmit DMA controller
649 * @card: card structure
651 * gelic_card_disable_txdmac terminates processing on the DMA controller by
652 * turing off DMA and issueing a force end
654 static inline void gelic_card_disable_txdmac(struct gelic_card
*card
)
658 /* this hvc blocks until the DMA in progress really stopped */
659 status
= lv1_net_stop_tx_dma(bus_id(card
), dev_id(card
), 0);
661 dev_err(ctodev(card
),
662 "lv1_net_stop_tx_dma faild, status=%d\n", status
);
666 * gelic_net_stop - called upon ifconfig down
667 * @netdev: interface device structure
671 int gelic_net_stop(struct net_device
*netdev
)
673 struct gelic_card
*card
;
675 pr_debug("%s: start\n", __func__
);
677 netif_stop_queue(netdev
);
678 netif_carrier_off(netdev
);
680 card
= netdev_card(netdev
);
681 gelic_card_down(card
);
683 pr_debug("%s: done\n", __func__
);
688 * gelic_card_get_next_tx_descr - returns the next available tx descriptor
689 * @card: device structure to get descriptor from
691 * returns the address of the next descriptor, or NULL if not available.
693 static struct gelic_descr
*
694 gelic_card_get_next_tx_descr(struct gelic_card
*card
)
696 if (!card
->tx_chain
.head
)
698 /* see if the next descriptor is free */
699 if (card
->tx_chain
.tail
!= card
->tx_chain
.head
->next
&&
700 gelic_descr_get_status(card
->tx_chain
.head
) ==
701 GELIC_DESCR_DMA_NOT_IN_USE
)
702 return card
->tx_chain
.head
;
709 * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
710 * @descr: descriptor structure to fill out
711 * @skb: packet to consider
713 * fills out the command and status field of the descriptor structure,
714 * depending on hardware checksum settings. This function assumes a wmb()
715 * has executed before.
717 static void gelic_descr_set_tx_cmdstat(struct gelic_descr
*descr
,
720 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
721 descr
->dmac_cmd_status
=
722 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM
|
723 GELIC_DESCR_TX_DMA_FRAME_TAIL
);
726 * if yes: tcp? udp? */
727 if (skb
->protocol
== htons(ETH_P_IP
)) {
728 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
729 descr
->dmac_cmd_status
=
730 cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM
|
731 GELIC_DESCR_TX_DMA_FRAME_TAIL
);
733 else if (ip_hdr(skb
)->protocol
== IPPROTO_UDP
)
734 descr
->dmac_cmd_status
=
735 cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM
|
736 GELIC_DESCR_TX_DMA_FRAME_TAIL
);
738 * the stack should checksum non-tcp and non-udp
739 * packets on his own: NETIF_F_IP_CSUM
741 descr
->dmac_cmd_status
=
742 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM
|
743 GELIC_DESCR_TX_DMA_FRAME_TAIL
);
748 static inline struct sk_buff
*gelic_put_vlan_tag(struct sk_buff
*skb
,
751 struct vlan_ethhdr
*veth
;
752 static unsigned int c
;
754 if (skb_headroom(skb
) < VLAN_HLEN
) {
755 struct sk_buff
*sk_tmp
= skb
;
756 pr_debug("%s: hd=%d c=%ud\n", __func__
, skb_headroom(skb
), c
);
757 skb
= skb_realloc_headroom(sk_tmp
, VLAN_HLEN
);
760 dev_kfree_skb_any(sk_tmp
);
762 veth
= (struct vlan_ethhdr
*)skb_push(skb
, VLAN_HLEN
);
764 /* Move the mac addresses to the top of buffer */
765 memmove(skb
->data
, skb
->data
+ VLAN_HLEN
, 2 * ETH_ALEN
);
767 veth
->h_vlan_proto
= cpu_to_be16(ETH_P_8021Q
);
768 veth
->h_vlan_TCI
= htons(tag
);
774 * gelic_descr_prepare_tx - setup a descriptor for sending packets
775 * @card: card structure
776 * @descr: descriptor structure
777 * @skb: packet to use
779 * returns 0 on success, <0 on failure.
782 static int gelic_descr_prepare_tx(struct gelic_card
*card
,
783 struct gelic_descr
*descr
,
788 if (card
->vlan_required
) {
789 struct sk_buff
*skb_tmp
;
790 enum gelic_port_type type
;
792 type
= netdev_port(skb
->dev
)->type
;
793 skb_tmp
= gelic_put_vlan_tag(skb
,
794 card
->vlan
[type
].tx
);
800 buf
= dma_map_single(ctodev(card
), skb
->data
, skb
->len
, DMA_TO_DEVICE
);
803 dev_err(ctodev(card
),
804 "dma map 2 failed (%p, %i). Dropping packet\n",
805 skb
->data
, skb
->len
);
809 descr
->buf_addr
= cpu_to_be32(buf
);
810 descr
->buf_size
= cpu_to_be32(skb
->len
);
812 descr
->data_status
= 0;
813 descr
->next_descr_addr
= 0; /* terminate hw descr */
814 gelic_descr_set_tx_cmdstat(descr
, skb
);
816 /* bump free descriptor pointer */
817 card
->tx_chain
.head
= descr
->next
;
822 * gelic_card_kick_txdma - enables TX DMA processing
823 * @card: card structure
824 * @descr: descriptor address to enable TX processing at
827 static int gelic_card_kick_txdma(struct gelic_card
*card
,
828 struct gelic_descr
*descr
)
832 if (card
->tx_dma_progress
)
835 if (gelic_descr_get_status(descr
) == GELIC_DESCR_DMA_CARDOWNED
) {
836 card
->tx_dma_progress
= 1;
837 status
= lv1_net_start_tx_dma(bus_id(card
), dev_id(card
),
840 dev_info(ctodev(card
), "lv1_net_start_txdma failed," \
841 "status=%d\n", status
);
847 * gelic_net_xmit - transmits a frame over the device
848 * @skb: packet to send out
849 * @netdev: interface device structure
851 * returns 0 on success, <0 on failure
853 int gelic_net_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
855 struct gelic_card
*card
= netdev_card(netdev
);
856 struct gelic_descr
*descr
;
860 spin_lock_irqsave(&card
->tx_lock
, flags
);
862 gelic_card_release_tx_chain(card
, 0);
864 descr
= gelic_card_get_next_tx_descr(card
);
867 * no more descriptors free
869 gelic_card_stop_queues(card
);
870 spin_unlock_irqrestore(&card
->tx_lock
, flags
);
871 return NETDEV_TX_BUSY
;
874 result
= gelic_descr_prepare_tx(card
, descr
, skb
);
877 * DMA map failed. As chanses are that failure
878 * would continue, just release skb and return
880 netdev
->stats
.tx_dropped
++;
881 dev_kfree_skb_any(skb
);
882 spin_unlock_irqrestore(&card
->tx_lock
, flags
);
886 * link this prepared descriptor to previous one
887 * to achieve high performance
889 descr
->prev
->next_descr_addr
= cpu_to_be32(descr
->bus_addr
);
891 * as hardware descriptor is modified in the above lines,
892 * ensure that the hardware sees it
895 if (gelic_card_kick_txdma(card
, descr
)) {
898 * release descriptors which were just prepared
900 netdev
->stats
.tx_dropped
++;
901 gelic_descr_release_tx(card
, descr
);
902 gelic_descr_release_tx(card
, descr
->next
);
903 card
->tx_chain
.tail
= descr
->next
->next
;
904 dev_info(ctodev(card
), "%s: kick failure\n", __func__
);
906 /* OK, DMA started/reserved */
907 netdev
->trans_start
= jiffies
;
910 spin_unlock_irqrestore(&card
->tx_lock
, flags
);
915 * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
916 * @descr: descriptor to process
917 * @card: card structure
918 * @netdev: net_device structure to be passed packet
920 * iommu-unmaps the skb, fills out skb structure and passes the data to the
921 * stack. The descriptor state is not changed.
923 static void gelic_net_pass_skb_up(struct gelic_descr
*descr
,
924 struct gelic_card
*card
,
925 struct net_device
*netdev
)
928 struct sk_buff
*skb
= descr
->skb
;
929 u32 data_status
, data_error
;
931 data_status
= be32_to_cpu(descr
->data_status
);
932 data_error
= be32_to_cpu(descr
->data_error
);
933 /* unmap skb buffer */
934 dma_unmap_single(ctodev(card
), be32_to_cpu(descr
->buf_addr
),
938 skb_put(skb
, be32_to_cpu(descr
->valid_size
)?
939 be32_to_cpu(descr
->valid_size
) :
940 be32_to_cpu(descr
->result_size
));
941 if (!descr
->valid_size
)
942 dev_info(ctodev(card
), "buffer full %x %x %x\n",
943 be32_to_cpu(descr
->result_size
),
944 be32_to_cpu(descr
->buf_size
),
945 be32_to_cpu(descr
->dmac_cmd_status
));
949 * the card put 2 bytes vlan tag in front
950 * of the ethernet frame
953 skb
->protocol
= eth_type_trans(skb
, netdev
);
955 /* checksum offload */
957 if ((data_status
& GELIC_DESCR_DATA_STATUS_CHK_MASK
) &&
958 (!(data_error
& GELIC_DESCR_DATA_ERROR_CHK_MASK
)))
959 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
961 skb
->ip_summed
= CHECKSUM_NONE
;
963 skb
->ip_summed
= CHECKSUM_NONE
;
965 /* update netdevice statistics */
966 netdev
->stats
.rx_packets
++;
967 netdev
->stats
.rx_bytes
+= skb
->len
;
969 /* pass skb up to stack */
970 netif_receive_skb(skb
);
974 * gelic_card_decode_one_descr - processes an rx descriptor
975 * @card: card structure
977 * returns 1 if a packet has been sent to the stack, otherwise 0
979 * processes an rx descriptor by iommu-unmapping the data buffer and passing
980 * the packet up to the stack
982 static int gelic_card_decode_one_descr(struct gelic_card
*card
)
984 enum gelic_descr_dma_status status
;
985 struct gelic_descr_chain
*chain
= &card
->rx_chain
;
986 struct gelic_descr
*descr
= chain
->head
;
987 struct net_device
*netdev
= NULL
;
988 int dmac_chain_ended
;
990 status
= gelic_descr_get_status(descr
);
991 /* is this descriptor terminated with next_descr == NULL? */
993 be32_to_cpu(descr
->dmac_cmd_status
) &
994 GELIC_DESCR_RX_DMA_CHAIN_END
;
996 if (status
== GELIC_DESCR_DMA_CARDOWNED
)
999 if (status
== GELIC_DESCR_DMA_NOT_IN_USE
) {
1000 dev_dbg(ctodev(card
), "dormant descr? %p\n", descr
);
1004 /* netdevice select */
1005 if (card
->vlan_required
) {
1008 vid
= *(u16
*)(descr
->skb
->data
) & VLAN_VID_MASK
;
1009 for (i
= 0; i
< GELIC_PORT_MAX
; i
++) {
1010 if (card
->vlan
[i
].rx
== vid
) {
1011 netdev
= card
->netdev
[i
];
1015 if (GELIC_PORT_MAX
<= i
) {
1016 pr_info("%s: unknown packet vid=%x\n", __func__
, vid
);
1020 netdev
= card
->netdev
[GELIC_PORT_ETHERNET_0
];
1022 if ((status
== GELIC_DESCR_DMA_RESPONSE_ERROR
) ||
1023 (status
== GELIC_DESCR_DMA_PROTECTION_ERROR
) ||
1024 (status
== GELIC_DESCR_DMA_FORCE_END
)) {
1025 dev_info(ctodev(card
), "dropping RX descriptor with state %x\n",
1027 netdev
->stats
.rx_dropped
++;
1031 if (status
== GELIC_DESCR_DMA_BUFFER_FULL
) {
1033 * Buffer full would occur if and only if
1034 * the frame length was longer than the size of this
1035 * descriptor's buffer. If the frame length was equal
1036 * to or shorter than buffer'size, FRAME_END condition
1038 * Anyway this frame was longer than the MTU,
1041 dev_info(ctodev(card
), "overlength frame\n");
1045 * descriptoers any other than FRAME_END here should
1046 * be treated as error.
1048 if (status
!= GELIC_DESCR_DMA_FRAME_END
) {
1049 dev_dbg(ctodev(card
), "RX descriptor with state %x\n",
1054 /* ok, we've got a packet in descr */
1055 gelic_net_pass_skb_up(descr
, card
, netdev
);
1058 * So that always DMAC can see the end
1059 * of the descriptor chain to avoid
1060 * from unwanted DMAC overrun.
1062 descr
->next_descr_addr
= 0;
1064 /* change the descriptor state: */
1065 gelic_descr_set_status(descr
, GELIC_DESCR_DMA_NOT_IN_USE
);
1068 * this call can fail, but for now, just leave this
1069 * decriptor without skb
1071 gelic_descr_prepare_rx(card
, descr
);
1073 chain
->tail
= descr
;
1074 chain
->head
= descr
->next
;
1077 * Set this descriptor the end of the chain.
1079 descr
->prev
->next_descr_addr
= cpu_to_be32(descr
->bus_addr
);
1082 * If dmac chain was met, DMAC stopped.
1085 if (dmac_chain_ended
) {
1086 card
->rx_dma_restart_required
= 1;
1087 dev_dbg(ctodev(card
), "reenable rx dma scheduled\n");
1094 * gelic_net_poll - NAPI poll function called by the stack to return packets
1095 * @napi: napi structure
1096 * @budget: number of packets we can pass to the stack at most
1098 * returns the number of the processed packets
1101 static int gelic_net_poll(struct napi_struct
*napi
, int budget
)
1103 struct gelic_card
*card
= container_of(napi
, struct gelic_card
, napi
);
1104 int packets_done
= 0;
1106 while (packets_done
< budget
) {
1107 if (!gelic_card_decode_one_descr(card
))
1113 if (packets_done
< budget
) {
1114 napi_complete(napi
);
1115 gelic_card_rx_irq_on(card
);
1117 return packets_done
;
1120 * gelic_net_change_mtu - changes the MTU of an interface
1121 * @netdev: interface device structure
1122 * @new_mtu: new MTU value
1124 * returns 0 on success, <0 on failure
1126 int gelic_net_change_mtu(struct net_device
*netdev
, int new_mtu
)
1128 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1129 * and mtu is outbound only anyway */
1130 if ((new_mtu
< GELIC_NET_MIN_MTU
) ||
1131 (new_mtu
> GELIC_NET_MAX_MTU
)) {
1134 netdev
->mtu
= new_mtu
;
1139 * gelic_card_interrupt - event handler for gelic_net
1141 static irqreturn_t
gelic_card_interrupt(int irq
, void *ptr
)
1143 unsigned long flags
;
1144 struct gelic_card
*card
= ptr
;
1147 status
= card
->irq_status
;
1152 status
&= card
->irq_mask
;
1154 if (card
->rx_dma_restart_required
) {
1155 card
->rx_dma_restart_required
= 0;
1156 gelic_card_enable_rxdmac(card
);
1159 if (status
& GELIC_CARD_RXINT
) {
1160 gelic_card_rx_irq_off(card
);
1161 napi_schedule(&card
->napi
);
1164 if (status
& GELIC_CARD_TXINT
) {
1165 spin_lock_irqsave(&card
->tx_lock
, flags
);
1166 card
->tx_dma_progress
= 0;
1167 gelic_card_release_tx_chain(card
, 0);
1168 /* kick outstanding tx descriptor if any */
1169 gelic_card_kick_txdma(card
, card
->tx_chain
.tail
);
1170 spin_unlock_irqrestore(&card
->tx_lock
, flags
);
1173 /* ether port status changed */
1174 if (status
& GELIC_CARD_PORT_STATUS_CHANGED
)
1175 gelic_card_get_ether_port_status(card
, 1);
1177 #ifdef CONFIG_GELIC_WIRELESS
1178 if (status
& (GELIC_CARD_WLAN_EVENT_RECEIVED
|
1179 GELIC_CARD_WLAN_COMMAND_COMPLETED
))
1180 gelic_wl_interrupt(card
->netdev
[GELIC_PORT_WIRELESS
], status
);
1186 #ifdef CONFIG_NET_POLL_CONTROLLER
1188 * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1189 * @netdev: interface device structure
1191 * see Documentation/networking/netconsole.txt
1193 void gelic_net_poll_controller(struct net_device
*netdev
)
1195 struct gelic_card
*card
= netdev_card(netdev
);
1197 gelic_card_set_irq_mask(card
, 0);
1198 gelic_card_interrupt(netdev
->irq
, netdev
);
1199 gelic_card_set_irq_mask(card
, card
->irq_mask
);
1201 #endif /* CONFIG_NET_POLL_CONTROLLER */
1204 * gelic_net_open - called upon ifonfig up
1205 * @netdev: interface device structure
1207 * returns 0 on success, <0 on failure
1209 * gelic_net_open allocates all the descriptors and memory needed for
1210 * operation, sets up multicast list and enables interrupts
1212 int gelic_net_open(struct net_device
*netdev
)
1214 struct gelic_card
*card
= netdev_card(netdev
);
1216 dev_dbg(ctodev(card
), " -> %s %p\n", __func__
, netdev
);
1218 gelic_card_up(card
);
1220 netif_start_queue(netdev
);
1221 gelic_card_get_ether_port_status(card
, 1);
1223 dev_dbg(ctodev(card
), " <- %s\n", __func__
);
1227 void gelic_net_get_drvinfo(struct net_device
*netdev
,
1228 struct ethtool_drvinfo
*info
)
1230 strncpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
) - 1);
1231 strncpy(info
->version
, DRV_VERSION
, sizeof(info
->version
) - 1);
1234 static int gelic_ether_get_settings(struct net_device
*netdev
,
1235 struct ethtool_cmd
*cmd
)
1237 struct gelic_card
*card
= netdev_card(netdev
);
1239 gelic_card_get_ether_port_status(card
, 0);
1241 if (card
->ether_port_status
& GELIC_LV1_ETHER_FULL_DUPLEX
)
1242 cmd
->duplex
= DUPLEX_FULL
;
1244 cmd
->duplex
= DUPLEX_HALF
;
1246 switch (card
->ether_port_status
& GELIC_LV1_ETHER_SPEED_MASK
) {
1247 case GELIC_LV1_ETHER_SPEED_10
:
1248 cmd
->speed
= SPEED_10
;
1250 case GELIC_LV1_ETHER_SPEED_100
:
1251 cmd
->speed
= SPEED_100
;
1253 case GELIC_LV1_ETHER_SPEED_1000
:
1254 cmd
->speed
= SPEED_1000
;
1257 pr_info("%s: speed unknown\n", __func__
);
1258 cmd
->speed
= SPEED_10
;
1262 cmd
->supported
= SUPPORTED_TP
| SUPPORTED_Autoneg
|
1263 SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
|
1264 SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full
|
1265 SUPPORTED_1000baseT_Full
;
1266 cmd
->advertising
= cmd
->supported
;
1267 if (card
->link_mode
& GELIC_LV1_ETHER_AUTO_NEG
) {
1268 cmd
->autoneg
= AUTONEG_ENABLE
;
1270 cmd
->autoneg
= AUTONEG_DISABLE
;
1271 cmd
->advertising
&= ~ADVERTISED_Autoneg
;
1273 cmd
->port
= PORT_TP
;
1278 static int gelic_ether_set_settings(struct net_device
*netdev
,
1279 struct ethtool_cmd
*cmd
)
1281 struct gelic_card
*card
= netdev_card(netdev
);
1285 if (cmd
->autoneg
== AUTONEG_ENABLE
) {
1286 mode
= GELIC_LV1_ETHER_AUTO_NEG
;
1288 switch (cmd
->speed
) {
1290 mode
= GELIC_LV1_ETHER_SPEED_10
;
1293 mode
= GELIC_LV1_ETHER_SPEED_100
;
1296 mode
= GELIC_LV1_ETHER_SPEED_1000
;
1301 if (cmd
->duplex
== DUPLEX_FULL
)
1302 mode
|= GELIC_LV1_ETHER_FULL_DUPLEX
;
1303 else if (cmd
->speed
== SPEED_1000
) {
1304 pr_info("1000 half duplex is not supported.\n");
1309 ret
= gelic_card_set_link_mode(card
, mode
);
1317 u32
gelic_net_get_rx_csum(struct net_device
*netdev
)
1319 struct gelic_card
*card
= netdev_card(netdev
);
1321 return card
->rx_csum
;
1324 int gelic_net_set_rx_csum(struct net_device
*netdev
, u32 data
)
1326 struct gelic_card
*card
= netdev_card(netdev
);
1328 card
->rx_csum
= data
;
1332 static void gelic_net_get_wol(struct net_device
*netdev
,
1333 struct ethtool_wolinfo
*wol
)
1335 if (0 <= ps3_compare_firmware_version(2, 2, 0))
1336 wol
->supported
= WAKE_MAGIC
;
1340 wol
->wolopts
= ps3_sys_manager_get_wol() ? wol
->supported
: 0;
1341 memset(&wol
->sopass
, 0, sizeof(wol
->sopass
));
1343 static int gelic_net_set_wol(struct net_device
*netdev
,
1344 struct ethtool_wolinfo
*wol
)
1347 struct gelic_card
*card
;
1350 if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1351 !capable(CAP_NET_ADMIN
))
1354 if (wol
->wolopts
& ~WAKE_MAGIC
)
1357 card
= netdev_card(netdev
);
1358 if (wol
->wolopts
& WAKE_MAGIC
) {
1359 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1361 GELIC_LV1_WOL_MAGIC_PACKET
,
1362 0, GELIC_LV1_WOL_MP_ENABLE
,
1365 pr_info("%s: enabling WOL failed %d\n", __func__
,
1370 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1372 GELIC_LV1_WOL_ADD_MATCH_ADDR
,
1373 0, GELIC_LV1_WOL_MATCH_ALL
,
1376 ps3_sys_manager_set_wol(1);
1378 pr_info("%s: enabling WOL filter failed %d\n",
1383 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1385 GELIC_LV1_WOL_MAGIC_PACKET
,
1386 0, GELIC_LV1_WOL_MP_DISABLE
,
1389 pr_info("%s: disabling WOL failed %d\n", __func__
,
1394 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1396 GELIC_LV1_WOL_DELETE_MATCH_ADDR
,
1397 0, GELIC_LV1_WOL_MATCH_ALL
,
1400 ps3_sys_manager_set_wol(0);
1402 pr_info("%s: removing WOL filter failed %d\n",
1411 static const struct ethtool_ops gelic_ether_ethtool_ops
= {
1412 .get_drvinfo
= gelic_net_get_drvinfo
,
1413 .get_settings
= gelic_ether_get_settings
,
1414 .set_settings
= gelic_ether_set_settings
,
1415 .get_link
= ethtool_op_get_link
,
1416 .get_tx_csum
= ethtool_op_get_tx_csum
,
1417 .set_tx_csum
= ethtool_op_set_tx_csum
,
1418 .get_rx_csum
= gelic_net_get_rx_csum
,
1419 .set_rx_csum
= gelic_net_set_rx_csum
,
1420 .get_wol
= gelic_net_get_wol
,
1421 .set_wol
= gelic_net_set_wol
,
1425 * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1426 * function (to be called not under interrupt status)
1427 * @work: work is context of tx timout task
1429 * called as task when tx hangs, resets interface (if interface is up)
1431 static void gelic_net_tx_timeout_task(struct work_struct
*work
)
1433 struct gelic_card
*card
=
1434 container_of(work
, struct gelic_card
, tx_timeout_task
);
1435 struct net_device
*netdev
= card
->netdev
[GELIC_PORT_ETHERNET_0
];
1437 dev_info(ctodev(card
), "%s:Timed out. Restarting... \n", __func__
);
1439 if (!(netdev
->flags
& IFF_UP
))
1442 netif_device_detach(netdev
);
1443 gelic_net_stop(netdev
);
1445 gelic_net_open(netdev
);
1446 netif_device_attach(netdev
);
1449 atomic_dec(&card
->tx_timeout_task_counter
);
1453 * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1454 * @netdev: interface device structure
1456 * called, if tx hangs. Schedules a task that resets the interface
1458 void gelic_net_tx_timeout(struct net_device
*netdev
)
1460 struct gelic_card
*card
;
1462 card
= netdev_card(netdev
);
1463 atomic_inc(&card
->tx_timeout_task_counter
);
1464 if (netdev
->flags
& IFF_UP
)
1465 schedule_work(&card
->tx_timeout_task
);
1467 atomic_dec(&card
->tx_timeout_task_counter
);
1470 static const struct net_device_ops gelic_netdevice_ops
= {
1471 .ndo_open
= gelic_net_open
,
1472 .ndo_stop
= gelic_net_stop
,
1473 .ndo_start_xmit
= gelic_net_xmit
,
1474 .ndo_set_multicast_list
= gelic_net_set_multi
,
1475 .ndo_change_mtu
= gelic_net_change_mtu
,
1476 .ndo_tx_timeout
= gelic_net_tx_timeout
,
1477 .ndo_set_mac_address
= eth_mac_addr
,
1478 .ndo_validate_addr
= eth_validate_addr
,
1479 #ifdef CONFIG_NET_POLL_CONTROLLER
1480 .ndo_poll_controller
= gelic_net_poll_controller
,
1485 * gelic_ether_setup_netdev_ops - initialization of net_device operations
1486 * @netdev: net_device structure
1488 * fills out function pointers in the net_device structure
1490 static void __devinit
gelic_ether_setup_netdev_ops(struct net_device
*netdev
,
1491 struct napi_struct
*napi
)
1493 netdev
->watchdog_timeo
= GELIC_NET_WATCHDOG_TIMEOUT
;
1495 netif_napi_add(netdev
, napi
,
1496 gelic_net_poll
, GELIC_NET_NAPI_WEIGHT
);
1497 netdev
->ethtool_ops
= &gelic_ether_ethtool_ops
;
1498 netdev
->netdev_ops
= &gelic_netdevice_ops
;
1502 * gelic_ether_setup_netdev - initialization of net_device
1503 * @netdev: net_device structure
1504 * @card: card structure
1506 * Returns 0 on success or <0 on failure
1508 * gelic_ether_setup_netdev initializes the net_device structure
1511 int __devinit
gelic_net_setup_netdev(struct net_device
*netdev
,
1512 struct gelic_card
*card
)
1517 netdev
->features
= NETIF_F_IP_CSUM
;
1519 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1520 GELIC_LV1_GET_MAC_ADDRESS
,
1523 if (status
|| !is_valid_ether_addr((u8
*)&v1
)) {
1524 dev_info(ctodev(card
),
1525 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1529 memcpy(netdev
->dev_addr
, &v1
, ETH_ALEN
);
1531 if (card
->vlan_required
) {
1532 netdev
->hard_header_len
+= VLAN_HLEN
;
1534 * As vlan is internally used,
1535 * we can not receive vlan packets
1537 netdev
->features
|= NETIF_F_VLAN_CHALLENGED
;
1540 status
= register_netdev(netdev
);
1542 dev_err(ctodev(card
), "%s:Couldn't register %s %d\n",
1543 __func__
, netdev
->name
, status
);
1546 dev_info(ctodev(card
), "%s: MAC addr %pM\n",
1547 netdev
->name
, netdev
->dev_addr
);
1553 * gelic_alloc_card_net - allocates net_device and card structure
1555 * returns the card structure or NULL in case of errors
1557 * the card and net_device structures are linked to each other
1559 #define GELIC_ALIGN (32)
1560 static struct gelic_card
* __devinit
gelic_alloc_card_net(struct net_device
**netdev
)
1562 struct gelic_card
*card
;
1563 struct gelic_port
*port
;
1567 * gelic requires dma descriptor is 32 bytes aligned and
1568 * the hypervisor requires irq_status is 8 bytes aligned.
1570 BUILD_BUG_ON(offsetof(struct gelic_card
, irq_status
) % 8);
1571 BUILD_BUG_ON(offsetof(struct gelic_card
, descr
) % 32);
1573 sizeof(struct gelic_card
) +
1574 sizeof(struct gelic_descr
) * GELIC_NET_RX_DESCRIPTORS
+
1575 sizeof(struct gelic_descr
) * GELIC_NET_TX_DESCRIPTORS
+
1578 p
= kzalloc(alloc_size
, GFP_KERNEL
);
1581 card
= PTR_ALIGN(p
, GELIC_ALIGN
);
1587 *netdev
= alloc_etherdev(sizeof(struct gelic_port
));
1589 kfree(card
->unalign
);
1592 port
= netdev_priv(*netdev
);
1595 port
->netdev
= *netdev
;
1597 port
->type
= GELIC_PORT_ETHERNET_0
;
1600 card
->netdev
[GELIC_PORT_ETHERNET_0
] = *netdev
;
1602 INIT_WORK(&card
->tx_timeout_task
, gelic_net_tx_timeout_task
);
1603 init_waitqueue_head(&card
->waitq
);
1604 atomic_set(&card
->tx_timeout_task_counter
, 0);
1605 mutex_init(&card
->updown_lock
);
1606 atomic_set(&card
->users
, 0);
1611 static void __devinit
gelic_card_get_vlan_info(struct gelic_card
*card
)
1620 [GELIC_PORT_ETHERNET_0
] = {
1621 .tx
= GELIC_LV1_VLAN_TX_ETHERNET_0
,
1622 .rx
= GELIC_LV1_VLAN_RX_ETHERNET_0
1624 [GELIC_PORT_WIRELESS
] = {
1625 .tx
= GELIC_LV1_VLAN_TX_WIRELESS
,
1626 .rx
= GELIC_LV1_VLAN_RX_WIRELESS
1630 for (i
= 0; i
< ARRAY_SIZE(vlan_id_ix
); i
++) {
1632 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1633 GELIC_LV1_GET_VLAN_ID
,
1636 if (status
|| !v1
) {
1637 if (status
!= LV1_NO_ENTRY
)
1638 dev_dbg(ctodev(card
),
1639 "get vlan id for tx(%d) failed(%d)\n",
1640 vlan_id_ix
[i
].tx
, status
);
1641 card
->vlan
[i
].tx
= 0;
1642 card
->vlan
[i
].rx
= 0;
1645 card
->vlan
[i
].tx
= (u16
)v1
;
1648 status
= lv1_net_control(bus_id(card
), dev_id(card
),
1649 GELIC_LV1_GET_VLAN_ID
,
1652 if (status
|| !v1
) {
1653 if (status
!= LV1_NO_ENTRY
)
1654 dev_info(ctodev(card
),
1655 "get vlan id for rx(%d) failed(%d)\n",
1656 vlan_id_ix
[i
].rx
, status
);
1657 card
->vlan
[i
].tx
= 0;
1658 card
->vlan
[i
].rx
= 0;
1661 card
->vlan
[i
].rx
= (u16
)v1
;
1663 dev_dbg(ctodev(card
), "vlan_id[%d] tx=%02x rx=%02x\n",
1664 i
, card
->vlan
[i
].tx
, card
->vlan
[i
].rx
);
1667 if (card
->vlan
[GELIC_PORT_ETHERNET_0
].tx
) {
1668 BUG_ON(!card
->vlan
[GELIC_PORT_WIRELESS
].tx
);
1669 card
->vlan_required
= 1;
1671 card
->vlan_required
= 0;
1673 /* check wirelss capable firmware */
1674 if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1675 card
->vlan
[GELIC_PORT_WIRELESS
].tx
= 0;
1676 card
->vlan
[GELIC_PORT_WIRELESS
].rx
= 0;
1679 dev_info(ctodev(card
), "internal vlan %s\n",
1680 card
->vlan_required
? "enabled" : "disabled");
1683 * ps3_gelic_driver_probe - add a device to the control of this driver
1685 static int __devinit
ps3_gelic_driver_probe(struct ps3_system_bus_device
*dev
)
1687 struct gelic_card
*card
;
1688 struct net_device
*netdev
;
1691 pr_debug("%s: called\n", __func__
);
1692 result
= ps3_open_hv_device(dev
);
1695 dev_dbg(&dev
->core
, "%s:ps3_open_hv_device failed\n",
1700 result
= ps3_dma_region_create(dev
->d_region
);
1703 dev_dbg(&dev
->core
, "%s:ps3_dma_region_create failed(%d)\n",
1705 BUG_ON("check region type");
1706 goto fail_dma_region
;
1709 /* alloc card/netdevice */
1710 card
= gelic_alloc_card_net(&netdev
);
1712 dev_info(&dev
->core
, "%s:gelic_net_alloc_card failed\n",
1715 goto fail_alloc_card
;
1717 ps3_system_bus_set_drvdata(dev
, card
);
1720 /* get internal vlan info */
1721 gelic_card_get_vlan_info(card
);
1723 card
->link_mode
= GELIC_LV1_ETHER_AUTO_NEG
;
1725 /* setup interrupt */
1726 result
= lv1_net_set_interrupt_status_indicator(bus_id(card
),
1728 ps3_mm_phys_to_lpar(__pa(&card
->irq_status
)),
1733 "%s:set_interrupt_status_indicator failed: %s\n",
1734 __func__
, ps3_result(result
));
1736 goto fail_status_indicator
;
1739 result
= ps3_sb_event_receive_port_setup(dev
, PS3_BINDING_CPU_ANY
,
1743 dev_info(ctodev(card
),
1744 "%s:gelic_net_open_device failed (%d)\n",
1747 goto fail_alloc_irq
;
1749 result
= request_irq(card
->irq
, gelic_card_interrupt
,
1750 IRQF_DISABLED
, netdev
->name
, card
);
1753 dev_info(ctodev(card
), "%s:request_irq failed (%d)\n",
1755 goto fail_request_irq
;
1758 /* setup card structure */
1759 card
->irq_mask
= GELIC_CARD_RXINT
| GELIC_CARD_TXINT
|
1760 GELIC_CARD_PORT_STATUS_CHANGED
;
1761 card
->rx_csum
= GELIC_CARD_RX_CSUM_DEFAULT
;
1764 if (gelic_card_init_chain(card
, &card
->tx_chain
,
1765 card
->descr
, GELIC_NET_TX_DESCRIPTORS
))
1767 if (gelic_card_init_chain(card
, &card
->rx_chain
,
1768 card
->descr
+ GELIC_NET_TX_DESCRIPTORS
,
1769 GELIC_NET_RX_DESCRIPTORS
))
1773 card
->tx_top
= card
->tx_chain
.head
;
1774 card
->rx_top
= card
->rx_chain
.head
;
1775 dev_dbg(ctodev(card
), "descr rx %p, tx %p, size %#lx, num %#x\n",
1776 card
->rx_top
, card
->tx_top
, sizeof(struct gelic_descr
),
1777 GELIC_NET_RX_DESCRIPTORS
);
1778 /* allocate rx skbs */
1779 if (gelic_card_alloc_rx_skbs(card
))
1780 goto fail_alloc_skbs
;
1782 spin_lock_init(&card
->tx_lock
);
1783 card
->tx_dma_progress
= 0;
1785 /* setup net_device structure */
1786 netdev
->irq
= card
->irq
;
1787 SET_NETDEV_DEV(netdev
, &card
->dev
->core
);
1788 gelic_ether_setup_netdev_ops(netdev
, &card
->napi
);
1789 result
= gelic_net_setup_netdev(netdev
, card
);
1791 dev_dbg(&dev
->core
, "%s: setup_netdev failed %d",
1793 goto fail_setup_netdev
;
1796 #ifdef CONFIG_GELIC_WIRELESS
1797 if (gelic_wl_driver_probe(card
)) {
1798 dev_dbg(&dev
->core
, "%s: WL init failed\n", __func__
);
1799 goto fail_setup_netdev
;
1802 pr_debug("%s: done\n", __func__
);
1807 gelic_card_free_chain(card
, card
->rx_chain
.head
);
1809 gelic_card_free_chain(card
, card
->tx_chain
.head
);
1811 free_irq(card
->irq
, card
);
1812 netdev
->irq
= NO_IRQ
;
1814 ps3_sb_event_receive_port_destroy(dev
, card
->irq
);
1816 lv1_net_set_interrupt_status_indicator(bus_id(card
),
1819 fail_status_indicator
:
1820 ps3_system_bus_set_drvdata(dev
, NULL
);
1821 kfree(netdev_card(netdev
)->unalign
);
1822 free_netdev(netdev
);
1824 ps3_dma_region_free(dev
->d_region
);
1826 ps3_close_hv_device(dev
);
1832 * ps3_gelic_driver_remove - remove a device from the control of this driver
1835 static int ps3_gelic_driver_remove(struct ps3_system_bus_device
*dev
)
1837 struct gelic_card
*card
= ps3_system_bus_get_drvdata(dev
);
1838 struct net_device
*netdev0
;
1839 pr_debug("%s: called\n", __func__
);
1841 /* set auto-negotiation */
1842 gelic_card_set_link_mode(card
, GELIC_LV1_ETHER_AUTO_NEG
);
1844 #ifdef CONFIG_GELIC_WIRELESS
1845 gelic_wl_driver_remove(card
);
1847 /* stop interrupt */
1848 gelic_card_set_irq_mask(card
, 0);
1850 /* turn off DMA, force end */
1851 gelic_card_disable_rxdmac(card
);
1852 gelic_card_disable_txdmac(card
);
1854 /* release chains */
1855 gelic_card_release_tx_chain(card
, 1);
1856 gelic_card_release_rx_chain(card
);
1858 gelic_card_free_chain(card
, card
->tx_top
);
1859 gelic_card_free_chain(card
, card
->rx_top
);
1861 netdev0
= card
->netdev
[GELIC_PORT_ETHERNET_0
];
1862 /* disconnect event port */
1863 free_irq(card
->irq
, card
);
1864 netdev0
->irq
= NO_IRQ
;
1865 ps3_sb_event_receive_port_destroy(card
->dev
, card
->irq
);
1867 wait_event(card
->waitq
,
1868 atomic_read(&card
->tx_timeout_task_counter
) == 0);
1870 lv1_net_set_interrupt_status_indicator(bus_id(card
), dev_id(card
),
1873 unregister_netdev(netdev0
);
1874 kfree(netdev_card(netdev0
)->unalign
);
1875 free_netdev(netdev0
);
1877 ps3_system_bus_set_drvdata(dev
, NULL
);
1879 ps3_dma_region_free(dev
->d_region
);
1881 ps3_close_hv_device(dev
);
1883 pr_debug("%s: done\n", __func__
);
1887 static struct ps3_system_bus_driver ps3_gelic_driver
= {
1888 .match_id
= PS3_MATCH_ID_GELIC
,
1889 .probe
= ps3_gelic_driver_probe
,
1890 .remove
= ps3_gelic_driver_remove
,
1891 .shutdown
= ps3_gelic_driver_remove
,
1892 .core
.name
= "ps3_gelic_driver",
1893 .core
.owner
= THIS_MODULE
,
1896 static int __init
ps3_gelic_driver_init (void)
1898 return firmware_has_feature(FW_FEATURE_PS3_LV1
)
1899 ? ps3_system_bus_driver_register(&ps3_gelic_driver
)
1903 static void __exit
ps3_gelic_driver_exit (void)
1905 ps3_system_bus_driver_unregister(&ps3_gelic_driver
);
1908 module_init(ps3_gelic_driver_init
);
1909 module_exit(ps3_gelic_driver_exit
);
1911 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC
);