?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ath9k: uses/needs led_classdev_[un]register
[linux-2.6/zen-sources.git] / drivers / net / sky2.c
blob3805b9318be725c8292bd86bc962a15ffe1b8486
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/crc32.h>
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/netdevice.h>
29 #include <linux/dma-mapping.h>
30 #include <linux/etherdevice.h>
31 #include <linux/ethtool.h>
32 #include <linux/pci.h>
33 #include <linux/ip.h>
34 #include <net/ip.h>
35 #include <linux/tcp.h>
36 #include <linux/in.h>
37 #include <linux/delay.h>
38 #include <linux/workqueue.h>
39 #include <linux/if_vlan.h>
40 #include <linux/prefetch.h>
41 #include <linux/debugfs.h>
42 #include <linux/mii.h>
43
44 #include <asm/irq.h>
45
46 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
47 #define SKY2_VLAN_TAG_USED 1
48 #endif
49
50 #include "sky2.h"
51
52 #define DRV_NAME "sky2"
53 #define DRV_VERSION "1.22"
54 #define PFX DRV_NAME " "
55
56 /*
57 * The Yukon II chipset takes 64 bit command blocks (called list elements)
58 * that are organized into three (receive, transmit, status) different rings
59 * similar to Tigon3.
60 */
61
62 #define RX_LE_SIZE 1024
63 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
64 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
65 #define RX_DEF_PENDING RX_MAX_PENDING
66
67 #define TX_RING_SIZE 512
68 #define TX_DEF_PENDING (TX_RING_SIZE - 1)
69 #define TX_MIN_PENDING 64
70 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
71
72 #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
73 #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
74 #define TX_WATCHDOG (5 * HZ)
75 #define NAPI_WEIGHT 64
76 #define PHY_RETRIES 1000
77
78 #define SKY2_EEPROM_MAGIC 0x9955aabb
79
80
81 #define RING_NEXT(x,s) (((x)+1) & ((s)-1))
82
83 static const u32 default_msg =
84 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
85 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
86 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
87
88 static int debug = -1; /* defaults above */
89 module_param(debug, int, 0);
90 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
91
92 static int copybreak __read_mostly = 128;
93 module_param(copybreak, int, 0);
94 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
95
96 static int disable_msi = 0;
97 module_param(disable_msi, int, 0);
98 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
99
100 static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
101 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
102 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
103 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
104 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
105 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
106 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
107 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
108 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
136 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
137 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
138 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
139 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
140 { 0 }
141 };
142
143 MODULE_DEVICE_TABLE(pci, sky2_id_table);
144
145 /* Avoid conditionals by using array */
146 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
147 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
148 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
149
150 static void sky2_set_multicast(struct net_device *dev);
151
152 /* Access to PHY via serial interconnect */
153 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
154 {
155 int i;
156
157 gma_write16(hw, port, GM_SMI_DATA, val);
158 gma_write16(hw, port, GM_SMI_CTRL,
159 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
160
161 for (i = 0; i < PHY_RETRIES; i++) {
162 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
163 if (ctrl == 0xffff)
164 goto io_error;
165
166 if (!(ctrl & GM_SMI_CT_BUSY))
167 return 0;
168
169 udelay(10);
170 }
171
172 dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
173 return -ETIMEDOUT;
174
175 io_error:
176 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
177 return -EIO;
178 }
179
180 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
181 {
182 int i;
183
184 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
185 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
186
187 for (i = 0; i < PHY_RETRIES; i++) {
188 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
189 if (ctrl == 0xffff)
190 goto io_error;
191
192 if (ctrl & GM_SMI_CT_RD_VAL) {
193 *val = gma_read16(hw, port, GM_SMI_DATA);
194 return 0;
195 }
196
197 udelay(10);
198 }
199
200 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
201 return -ETIMEDOUT;
202 io_error:
203 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
204 return -EIO;
205 }
206
207 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
208 {
209 u16 v;
210 __gm_phy_read(hw, port, reg, &v);
211 return v;
212 }
213
214
215 static void sky2_power_on(struct sky2_hw *hw)
216 {
217 /* switch power to VCC (WA for VAUX problem) */
218 sky2_write8(hw, B0_POWER_CTRL,
219 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
220
221 /* disable Core Clock Division, */
222 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
223
224 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
225 /* enable bits are inverted */
226 sky2_write8(hw, B2_Y2_CLK_GATE,
227 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
228 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
229 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
230 else
231 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
232
233 if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
234 u32 reg;
235
236 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
237
238 reg = sky2_pci_read32(hw, PCI_DEV_REG4);
239 /* set all bits to 0 except bits 15..12 and 8 */
240 reg &= P_ASPM_CONTROL_MSK;
241 sky2_pci_write32(hw, PCI_DEV_REG4, reg);
242
243 reg = sky2_pci_read32(hw, PCI_DEV_REG5);
244 /* set all bits to 0 except bits 28 & 27 */
245 reg &= P_CTL_TIM_VMAIN_AV_MSK;
246 sky2_pci_write32(hw, PCI_DEV_REG5, reg);
247
248 sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
249
250 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
251 reg = sky2_read32(hw, B2_GP_IO);
252 reg |= GLB_GPIO_STAT_RACE_DIS;
253 sky2_write32(hw, B2_GP_IO, reg);
254
255 sky2_read32(hw, B2_GP_IO);
256 }
257 }
258
259 static void sky2_power_aux(struct sky2_hw *hw)
260 {
261 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
262 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
263 else
264 /* enable bits are inverted */
265 sky2_write8(hw, B2_Y2_CLK_GATE,
266 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
267 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
268 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
269
270 /* switch power to VAUX */
271 if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
272 sky2_write8(hw, B0_POWER_CTRL,
273 (PC_VAUX_ENA | PC_VCC_ENA |
274 PC_VAUX_ON | PC_VCC_OFF));
275 }
276
277 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
278 {
279 u16 reg;
280
281 /* disable all GMAC IRQ's */
282 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
283
284 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
285 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
286 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
287 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
288
289 reg = gma_read16(hw, port, GM_RX_CTRL);
290 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
291 gma_write16(hw, port, GM_RX_CTRL, reg);
292 }
293
294 /* flow control to advertise bits */
295 static const u16 copper_fc_adv[] = {
296 [FC_NONE] = 0,
297 [FC_TX] = PHY_M_AN_ASP,
298 [FC_RX] = PHY_M_AN_PC,
299 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
300 };
301
302 /* flow control to advertise bits when using 1000BaseX */
303 static const u16 fiber_fc_adv[] = {
304 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
305 [FC_TX] = PHY_M_P_ASYM_MD_X,
306 [FC_RX] = PHY_M_P_SYM_MD_X,
307 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
308 };
309
310 /* flow control to GMA disable bits */
311 static const u16 gm_fc_disable[] = {
312 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
313 [FC_TX] = GM_GPCR_FC_RX_DIS,
314 [FC_RX] = GM_GPCR_FC_TX_DIS,
315 [FC_BOTH] = 0,
316 };
317
318
319 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
320 {
321 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
322 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
323
324 if (sky2->autoneg == AUTONEG_ENABLE &&
325 !(hw->flags & SKY2_HW_NEWER_PHY)) {
326 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
327
328 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
329 PHY_M_EC_MAC_S_MSK);
330 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
331
332 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
333 if (hw->chip_id == CHIP_ID_YUKON_EC)
334 /* set downshift counter to 3x and enable downshift */
335 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
336 else
337 /* set master & slave downshift counter to 1x */
338 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
339
340 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
341 }
342
343 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
344 if (sky2_is_copper(hw)) {
345 if (!(hw->flags & SKY2_HW_GIGABIT)) {
346 /* enable automatic crossover */
347 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
348
349 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
350 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
351 u16 spec;
352
353 /* Enable Class A driver for FE+ A0 */
354 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
355 spec |= PHY_M_FESC_SEL_CL_A;
356 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
357 }
358 } else {
359 /* disable energy detect */
360 ctrl &= ~PHY_M_PC_EN_DET_MSK;
361
362 /* enable automatic crossover */
363 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
364
365 /* downshift on PHY 88E1112 and 88E1149 is changed */
366 if (sky2->autoneg == AUTONEG_ENABLE
367 && (hw->flags & SKY2_HW_NEWER_PHY)) {
368 /* set downshift counter to 3x and enable downshift */
369 ctrl &= ~PHY_M_PC_DSC_MSK;
370 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
371 }
372 }
373 } else {
374 /* workaround for deviation #4.88 (CRC errors) */
375 /* disable Automatic Crossover */
376
377 ctrl &= ~PHY_M_PC_MDIX_MSK;
378 }
379
380 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
381
382 /* special setup for PHY 88E1112 Fiber */
383 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
384 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
385
386 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
387 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
388 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
389 ctrl &= ~PHY_M_MAC_MD_MSK;
390 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
391 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
392
393 if (hw->pmd_type == 'P') {
394 /* select page 1 to access Fiber registers */
395 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
396
397 /* for SFP-module set SIGDET polarity to low */
398 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
399 ctrl |= PHY_M_FIB_SIGD_POL;
400 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
401 }
402
403 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
404 }
405
406 ctrl = PHY_CT_RESET;
407 ct1000 = 0;
408 adv = PHY_AN_CSMA;
409 reg = 0;
410
411 if (sky2->autoneg == AUTONEG_ENABLE) {
412 if (sky2_is_copper(hw)) {
413 if (sky2->advertising & ADVERTISED_1000baseT_Full)
414 ct1000 |= PHY_M_1000C_AFD;
415 if (sky2->advertising & ADVERTISED_1000baseT_Half)
416 ct1000 |= PHY_M_1000C_AHD;
417 if (sky2->advertising & ADVERTISED_100baseT_Full)
418 adv |= PHY_M_AN_100_FD;
419 if (sky2->advertising & ADVERTISED_100baseT_Half)
420 adv |= PHY_M_AN_100_HD;
421 if (sky2->advertising & ADVERTISED_10baseT_Full)
422 adv |= PHY_M_AN_10_FD;
423 if (sky2->advertising & ADVERTISED_10baseT_Half)
424 adv |= PHY_M_AN_10_HD;
425
426 adv |= copper_fc_adv[sky2->flow_mode];
427 } else { /* special defines for FIBER (88E1040S only) */
428 if (sky2->advertising & ADVERTISED_1000baseT_Full)
429 adv |= PHY_M_AN_1000X_AFD;
430 if (sky2->advertising & ADVERTISED_1000baseT_Half)
431 adv |= PHY_M_AN_1000X_AHD;
432
433 adv |= fiber_fc_adv[sky2->flow_mode];
434 }
435
436 /* Restart Auto-negotiation */
437 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
438 } else {
439 /* forced speed/duplex settings */
440 ct1000 = PHY_M_1000C_MSE;
441
442 /* Disable auto update for duplex flow control and speed */
443 reg |= GM_GPCR_AU_ALL_DIS;
444
445 switch (sky2->speed) {
446 case SPEED_1000:
447 ctrl |= PHY_CT_SP1000;
448 reg |= GM_GPCR_SPEED_1000;
449 break;
450 case SPEED_100:
451 ctrl |= PHY_CT_SP100;
452 reg |= GM_GPCR_SPEED_100;
453 break;
454 }
455
456 if (sky2->duplex == DUPLEX_FULL) {
457 reg |= GM_GPCR_DUP_FULL;
458 ctrl |= PHY_CT_DUP_MD;
459 } else if (sky2->speed < SPEED_1000)
460 sky2->flow_mode = FC_NONE;
461
462
463 reg |= gm_fc_disable[sky2->flow_mode];
464
465 /* Forward pause packets to GMAC? */
466 if (sky2->flow_mode & FC_RX)
467 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
468 else
469 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
470 }
471
472 gma_write16(hw, port, GM_GP_CTRL, reg);
473
474 if (hw->flags & SKY2_HW_GIGABIT)
475 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
476
477 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
478 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
479
480 /* Setup Phy LED's */
481 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
482 ledover = 0;
483
484 switch (hw->chip_id) {
485 case CHIP_ID_YUKON_FE:
486 /* on 88E3082 these bits are at 11..9 (shifted left) */
487 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
488
489 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
490
491 /* delete ACT LED control bits */
492 ctrl &= ~PHY_M_FELP_LED1_MSK;
493 /* change ACT LED control to blink mode */
494 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
495 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
496 break;
497
498 case CHIP_ID_YUKON_FE_P:
499 /* Enable Link Partner Next Page */
500 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
501 ctrl |= PHY_M_PC_ENA_LIP_NP;
502
503 /* disable Energy Detect and enable scrambler */
504 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
505 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
506
507 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
508 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
509 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
510 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
511
512 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
513 break;
514
515 case CHIP_ID_YUKON_XL:
516 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
517
518 /* select page 3 to access LED control register */
519 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
520
521 /* set LED Function Control register */
522 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
523 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
524 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
525 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
526 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
527
528 /* set Polarity Control register */
529 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
530 (PHY_M_POLC_LS1_P_MIX(4) |
531 PHY_M_POLC_IS0_P_MIX(4) |
532 PHY_M_POLC_LOS_CTRL(2) |
533 PHY_M_POLC_INIT_CTRL(2) |
534 PHY_M_POLC_STA1_CTRL(2) |
535 PHY_M_POLC_STA0_CTRL(2)));
536
537 /* restore page register */
538 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
539 break;
540
541 case CHIP_ID_YUKON_EC_U:
542 case CHIP_ID_YUKON_EX:
543 case CHIP_ID_YUKON_SUPR:
544 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
545
546 /* select page 3 to access LED control register */
547 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
548
549 /* set LED Function Control register */
550 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
551 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
552 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
553 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
554 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
555
556 /* set Blink Rate in LED Timer Control Register */
557 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
558 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
559 /* restore page register */
560 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
561 break;
562
563 default:
564 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
565 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
566
567 /* turn off the Rx LED (LED_RX) */
568 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
569 }
570
571 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
572 /* apply fixes in PHY AFE */
573 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
574
575 /* increase differential signal amplitude in 10BASE-T */
576 gm_phy_write(hw, port, 0x18, 0xaa99);
577 gm_phy_write(hw, port, 0x17, 0x2011);
578
579 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
580 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
581 gm_phy_write(hw, port, 0x18, 0xa204);
582 gm_phy_write(hw, port, 0x17, 0x2002);
583 }
584
585 /* set page register to 0 */
586 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
587 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
588 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
589 /* apply workaround for integrated resistors calibration */
590 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
591 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
592 } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
593 hw->chip_id < CHIP_ID_YUKON_SUPR) {
594 /* no effect on Yukon-XL */
595 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
596
597 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
598 /* turn on 100 Mbps LED (LED_LINK100) */
599 ledover |= PHY_M_LED_MO_100(MO_LED_ON);
600 }
601
602 if (ledover)
603 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
604
605 }
606
607 /* Enable phy interrupt on auto-negotiation complete (or link up) */
608 if (sky2->autoneg == AUTONEG_ENABLE)
609 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
610 else
611 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
612 }
613
614 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
615 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
616
617 static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
618 {
619 u32 reg1;
620
621 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
622 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
623 reg1 &= ~phy_power[port];
624
625 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
626 reg1 |= coma_mode[port];
627
628 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
629 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
630 sky2_pci_read32(hw, PCI_DEV_REG1);
631
632 if (hw->chip_id == CHIP_ID_YUKON_FE)
633 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
634 else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
635 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
636 }
637
638 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
639 {
640 u32 reg1;
641 u16 ctrl;
642
643 /* release GPHY Control reset */
644 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
645
646 /* release GMAC reset */
647 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
648
649 if (hw->flags & SKY2_HW_NEWER_PHY) {
650 /* select page 2 to access MAC control register */
651 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
652
653 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
654 /* allow GMII Power Down */
655 ctrl &= ~PHY_M_MAC_GMIF_PUP;
656 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
657
658 /* set page register back to 0 */
659 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
660 }
661
662 /* setup General Purpose Control Register */
663 gma_write16(hw, port, GM_GP_CTRL,
664 GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
665
666 if (hw->chip_id != CHIP_ID_YUKON_EC) {
667 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
668 /* select page 2 to access MAC control register */
669 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
670
671 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
672 /* enable Power Down */
673 ctrl |= PHY_M_PC_POW_D_ENA;
674 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
675
676 /* set page register back to 0 */
677 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
678 }
679
680 /* set IEEE compatible Power Down Mode (dev. #4.99) */
681 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
682 }
683
684 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
685 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
686 reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
687 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
688 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
689 }
690
691 /* Force a renegotiation */
692 static void sky2_phy_reinit(struct sky2_port *sky2)
693 {
694 spin_lock_bh(&sky2->phy_lock);
695 sky2_phy_init(sky2->hw, sky2->port);
696 spin_unlock_bh(&sky2->phy_lock);
697 }
698
699 /* Put device in state to listen for Wake On Lan */
700 static void sky2_wol_init(struct sky2_port *sky2)
701 {
702 struct sky2_hw *hw = sky2->hw;
703 unsigned port = sky2->port;
704 enum flow_control save_mode;
705 u16 ctrl;
706 u32 reg1;
707
708 /* Bring hardware out of reset */
709 sky2_write16(hw, B0_CTST, CS_RST_CLR);
710 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
711
712 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
713 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
714
715 /* Force to 10/100
716 * sky2_reset will re-enable on resume
717 */
718 save_mode = sky2->flow_mode;
719 ctrl = sky2->advertising;
720
721 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
722 sky2->flow_mode = FC_NONE;
723
724 spin_lock_bh(&sky2->phy_lock);
725 sky2_phy_power_up(hw, port);
726 sky2_phy_init(hw, port);
727 spin_unlock_bh(&sky2->phy_lock);
728
729 sky2->flow_mode = save_mode;
730 sky2->advertising = ctrl;
731
732 /* Set GMAC to no flow control and auto update for speed/duplex */
733 gma_write16(hw, port, GM_GP_CTRL,
734 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
735 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
736
737 /* Set WOL address */
738 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
739 sky2->netdev->dev_addr, ETH_ALEN);
740
741 /* Turn on appropriate WOL control bits */
742 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
743 ctrl = 0;
744 if (sky2->wol & WAKE_PHY)
745 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
746 else
747 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
748
749 if (sky2->wol & WAKE_MAGIC)
750 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
751 else
752 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
753
754 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
755 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
756
757 /* Turn on legacy PCI-Express PME mode */
758 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
759 reg1 |= PCI_Y2_PME_LEGACY;
760 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
761
762 /* block receiver */
763 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
764
765 }
766
767 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
768 {
769 struct net_device *dev = hw->dev[port];
770
771 if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
772 hw->chip_rev != CHIP_REV_YU_EX_A0) ||
773 hw->chip_id == CHIP_ID_YUKON_FE_P ||
774 hw->chip_id == CHIP_ID_YUKON_SUPR) {
775 /* Yukon-Extreme B0 and further Extreme devices */
776 /* enable Store & Forward mode for TX */
777
778 if (dev->mtu <= ETH_DATA_LEN)
779 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
780 TX_JUMBO_DIS | TX_STFW_ENA);
781
782 else
783 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
784 TX_JUMBO_ENA| TX_STFW_ENA);
785 } else {
786 if (dev->mtu <= ETH_DATA_LEN)
787 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
788 else {
789 /* set Tx GMAC FIFO Almost Empty Threshold */
790 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
791 (ECU_JUMBO_WM << 16) | ECU_AE_THR);
792
793 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
794
795 /* Can't do offload because of lack of store/forward */
796 dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
797 }
798 }
799 }
800
801 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
802 {
803 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
804 u16 reg;
805 u32 rx_reg;
806 int i;
807 const u8 *addr = hw->dev[port]->dev_addr;
808
809 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
810 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
811
812 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
813
814 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) {
815 /* WA DEV_472 -- looks like crossed wires on port 2 */
816 /* clear GMAC 1 Control reset */
817 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
818 do {
819 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
820 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
821 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
822 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
823 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
824 }
825
826 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
827
828 /* Enable Transmit FIFO Underrun */
829 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
830
831 spin_lock_bh(&sky2->phy_lock);
832 sky2_phy_power_up(hw, port);
833 sky2_phy_init(hw, port);
834 spin_unlock_bh(&sky2->phy_lock);
835
836 /* MIB clear */
837 reg = gma_read16(hw, port, GM_PHY_ADDR);
838 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
839
840 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
841 gma_read16(hw, port, i);
842 gma_write16(hw, port, GM_PHY_ADDR, reg);
843
844 /* transmit control */
845 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
846
847 /* receive control reg: unicast + multicast + no FCS */
848 gma_write16(hw, port, GM_RX_CTRL,
849 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
850
851 /* transmit flow control */
852 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
853
854 /* transmit parameter */
855 gma_write16(hw, port, GM_TX_PARAM,
856 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
857 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
858 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
859 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
860
861 /* serial mode register */
862 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
863 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
864
865 if (hw->dev[port]->mtu > ETH_DATA_LEN)
866 reg |= GM_SMOD_JUMBO_ENA;
867
868 gma_write16(hw, port, GM_SERIAL_MODE, reg);
869
870 /* virtual address for data */
871 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
872
873 /* physical address: used for pause frames */
874 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
875
876 /* ignore counter overflows */
877 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
878 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
879 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
880
881 /* Configure Rx MAC FIFO */
882 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
883 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
884 if (hw->chip_id == CHIP_ID_YUKON_EX ||
885 hw->chip_id == CHIP_ID_YUKON_FE_P)
886 rx_reg |= GMF_RX_OVER_ON;
887
888 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
889
890 if (hw->chip_id == CHIP_ID_YUKON_XL) {
891 /* Hardware errata - clear flush mask */
892 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
893 } else {
894 /* Flush Rx MAC FIFO on any flow control or error */
895 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
896 }
897
898 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
899 reg = RX_GMF_FL_THR_DEF + 1;
900 /* Another magic mystery workaround from sk98lin */
901 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
902 hw->chip_rev == CHIP_REV_YU_FE2_A0)
903 reg = 0x178;
904 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
905
906 /* Configure Tx MAC FIFO */
907 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
908 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
909
910 /* On chips without ram buffer, pause is controled by MAC level */
911 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
912 sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
913 sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
914
915 sky2_set_tx_stfwd(hw, port);
916 }
917
918 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
919 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
920 /* disable dynamic watermark */
921 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
922 reg &= ~TX_DYN_WM_ENA;
923 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
924 }
925 }
926
927 /* Assign Ram Buffer allocation to queue */
928 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
929 {
930 u32 end;
931
932 /* convert from K bytes to qwords used for hw register */
933 start *= 1024/8;
934 space *= 1024/8;
935 end = start + space - 1;
936
937 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
938 sky2_write32(hw, RB_ADDR(q, RB_START), start);
939 sky2_write32(hw, RB_ADDR(q, RB_END), end);
940 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
941 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
942
943 if (q == Q_R1 || q == Q_R2) {
944 u32 tp = space - space/4;
945
946 /* On receive queue's set the thresholds
947 * give receiver priority when > 3/4 full
948 * send pause when down to 2K
949 */
950 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
951 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
952
953 tp = space - 2048/8;
954 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
955 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
956 } else {
957 /* Enable store & forward on Tx queue's because
958 * Tx FIFO is only 1K on Yukon
959 */
960 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
961 }
962
963 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
964 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
965 }
966
967 /* Setup Bus Memory Interface */
968 static void sky2_qset(struct sky2_hw *hw, u16 q)
969 {
970 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
971 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
972 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
973 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
974 }
975
976 /* Setup prefetch unit registers. This is the interface between
977 * hardware and driver list elements
978 */
979 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
980 u64 addr, u32 last)
981 {
982 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
983 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
984 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
985 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
986 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
987 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
988
989 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
990 }
991
992 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
993 {
994 struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
995
996 sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
997 le->ctrl = 0;
998 return le;
999 }
1000
1001 static void tx_init(struct sky2_port *sky2)
1002 {
1003 struct sky2_tx_le *le;
1004
1005 sky2->tx_prod = sky2->tx_cons = 0;
1006 sky2->tx_tcpsum = 0;
1007 sky2->tx_last_mss = 0;
1008
1009 le = get_tx_le(sky2);
1010 le->addr = 0;
1011 le->opcode = OP_ADDR64 | HW_OWNER;
1012 }
1013
1014 static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
1015 struct sky2_tx_le *le)
1016 {
1017 return sky2->tx_ring + (le - sky2->tx_le);
1018 }
1019
1020 /* Update chip's next pointer */
1021 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
1022 {
1023 /* Make sure write' to descriptors are complete before we tell hardware */
1024 wmb();
1025 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
1026
1027 /* Synchronize I/O on since next processor may write to tail */
1028 mmiowb();
1029 }
1030
1031
1032 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
1033 {
1034 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
1035 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
1036 le->ctrl = 0;
1037 return le;
1038 }
1039
1040 /* Build description to hardware for one receive segment */
1041 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
1042 dma_addr_t map, unsigned len)
1043 {
1044 struct sky2_rx_le *le;
1045
1046 if (sizeof(dma_addr_t) > sizeof(u32)) {
1047 le = sky2_next_rx(sky2);
1048 le->addr = cpu_to_le32(upper_32_bits(map));
1049 le->opcode = OP_ADDR64 | HW_OWNER;
1050 }
1051
1052 le = sky2_next_rx(sky2);
1053 le->addr = cpu_to_le32((u32) map);
1054 le->length = cpu_to_le16(len);
1055 le->opcode = op | HW_OWNER;
1056 }
1057
1058 /* Build description to hardware for one possibly fragmented skb */
1059 static void sky2_rx_submit(struct sky2_port *sky2,
1060 const struct rx_ring_info *re)
1061 {
1062 int i;
1063
1064 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
1065
1066 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
1067 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
1068 }
1069
1070
1071 static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
1072 unsigned size)
1073 {
1074 struct sk_buff *skb = re->skb;
1075 int i;
1076
1077 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
1078 pci_unmap_len_set(re, data_size, size);
1079
1080 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1081 re->frag_addr[i] = pci_map_page(pdev,
1082 skb_shinfo(skb)->frags[i].page,
1083 skb_shinfo(skb)->frags[i].page_offset,
1084 skb_shinfo(skb)->frags[i].size,
1085 PCI_DMA_FROMDEVICE);
1086 }
1087
1088 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
1089 {
1090 struct sk_buff *skb = re->skb;
1091 int i;
1092
1093 pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size),
1094 PCI_DMA_FROMDEVICE);
1095
1096 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1097 pci_unmap_page(pdev, re->frag_addr[i],
1098 skb_shinfo(skb)->frags[i].size,
1099 PCI_DMA_FROMDEVICE);
1100 }
1101
1102 /* Tell chip where to start receive checksum.
1103 * Actually has two checksums, but set both same to avoid possible byte
1104 * order problems.
1105 */
1106 static void rx_set_checksum(struct sky2_port *sky2)
1107 {
1108 struct sky2_rx_le *le = sky2_next_rx(sky2);
1109
1110 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
1111 le->ctrl = 0;
1112 le->opcode = OP_TCPSTART | HW_OWNER;
1113
1114 sky2_write32(sky2->hw,
1115 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1116 sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
1117 }
1118
1119 /*
1120 * The RX Stop command will not work for Yukon-2 if the BMU does not
1121 * reach the end of packet and since we can't make sure that we have
1122 * incoming data, we must reset the BMU while it is not doing a DMA
1123 * transfer. Since it is possible that the RX path is still active,
1124 * the RX RAM buffer will be stopped first, so any possible incoming
1125 * data will not trigger a DMA. After the RAM buffer is stopped, the
1126 * BMU is polled until any DMA in progress is ended and only then it
1127 * will be reset.
1128 */
1129 static void sky2_rx_stop(struct sky2_port *sky2)
1130 {
1131 struct sky2_hw *hw = sky2->hw;
1132 unsigned rxq = rxqaddr[sky2->port];
1133 int i;
1134
1135 /* disable the RAM Buffer receive queue */
1136 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
1137
1138 for (i = 0; i < 0xffff; i++)
1139 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
1140 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
1141 goto stopped;
1142
1143 printk(KERN_WARNING PFX "%s: receiver stop failed\n",
1144 sky2->netdev->name);
1145 stopped:
1146 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
1147
1148 /* reset the Rx prefetch unit */
1149 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1150 mmiowb();
1151 }
1152
1153 /* Clean out receive buffer area, assumes receiver hardware stopped */
1154 static void sky2_rx_clean(struct sky2_port *sky2)
1155 {
1156 unsigned i;
1157
1158 memset(sky2->rx_le, 0, RX_LE_BYTES);
1159 for (i = 0; i < sky2->rx_pending; i++) {
1160 struct rx_ring_info *re = sky2->rx_ring + i;
1161
1162 if (re->skb) {
1163 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1164 kfree_skb(re->skb);
1165 re->skb = NULL;
1166 }
1167 }
1168 }
1169
1170 /* Basic MII support */
1171 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1172 {
1173 struct mii_ioctl_data *data = if_mii(ifr);
1174 struct sky2_port *sky2 = netdev_priv(dev);
1175 struct sky2_hw *hw = sky2->hw;
1176 int err = -EOPNOTSUPP;
1177
1178 if (!netif_running(dev))
1179 return -ENODEV; /* Phy still in reset */
1180
1181 switch (cmd) {
1182 case SIOCGMIIPHY:
1183 data->phy_id = PHY_ADDR_MARV;
1184
1185 /* fallthru */
1186 case SIOCGMIIREG: {
1187 u16 val = 0;
1188
1189 spin_lock_bh(&sky2->phy_lock);
1190 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1191 spin_unlock_bh(&sky2->phy_lock);
1192
1193 data->val_out = val;
1194 break;
1195 }
1196
1197 case SIOCSMIIREG:
1198 if (!capable(CAP_NET_ADMIN))
1199 return -EPERM;
1200
1201 spin_lock_bh(&sky2->phy_lock);
1202 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1203 data->val_in);
1204 spin_unlock_bh(&sky2->phy_lock);
1205 break;
1206 }
1207 return err;
1208 }
1209
1210 #ifdef SKY2_VLAN_TAG_USED
1211 static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
1212 {
1213 if (onoff) {
1214 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1215 RX_VLAN_STRIP_ON);
1216 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1217 TX_VLAN_TAG_ON);
1218 } else {
1219 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1220 RX_VLAN_STRIP_OFF);
1221 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1222 TX_VLAN_TAG_OFF);
1223 }
1224 }
1225
1226 static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1227 {
1228 struct sky2_port *sky2 = netdev_priv(dev);
1229 struct sky2_hw *hw = sky2->hw;
1230 u16 port = sky2->port;
1231
1232 netif_tx_lock_bh(dev);
1233 napi_disable(&hw->napi);
1234
1235 sky2->vlgrp = grp;
1236 sky2_set_vlan_mode(hw, port, grp != NULL);
1237
1238 sky2_read32(hw, B0_Y2_SP_LISR);
1239 napi_enable(&hw->napi);
1240 netif_tx_unlock_bh(dev);
1241 }
1242 #endif
1243
1244 /*
1245 * Allocate an skb for receiving. If the MTU is large enough
1246 * make the skb non-linear with a fragment list of pages.
1247 */
1248 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
1249 {
1250 struct sk_buff *skb;
1251 int i;
1252
1253 if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
1254 unsigned char *start;
1255 /*
1256 * Workaround for a bug in FIFO that cause hang
1257 * if the FIFO if the receive buffer is not 64 byte aligned.
1258 * The buffer returned from netdev_alloc_skb is
1259 * aligned except if slab debugging is enabled.
1260 */
1261 skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + 8);
1262 if (!skb)
1263 goto nomem;
1264 start = PTR_ALIGN(skb->data, 8);
1265 skb_reserve(skb, start - skb->data);
1266 } else {
1267 skb = netdev_alloc_skb(sky2->netdev,
1268 sky2->rx_data_size + NET_IP_ALIGN);
1269 if (!skb)
1270 goto nomem;
1271 skb_reserve(skb, NET_IP_ALIGN);
1272 }
1273
1274 for (i = 0; i < sky2->rx_nfrags; i++) {
1275 struct page *page = alloc_page(GFP_ATOMIC);
1276
1277 if (!page)
1278 goto free_partial;
1279 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1280 }
1281
1282 return skb;
1283 free_partial:
1284 kfree_skb(skb);
1285 nomem:
1286 return NULL;
1287 }
1288
1289 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
1290 {
1291 sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
1292 }
1293
1294 /*
1295 * Allocate and setup receiver buffer pool.
1296 * Normal case this ends up creating one list element for skb
1297 * in the receive ring. Worst case if using large MTU and each
1298 * allocation falls on a different 64 bit region, that results
1299 * in 6 list elements per ring entry.
1300 * One element is used for checksum enable/disable, and one
1301 * extra to avoid wrap.
1302 */
1303 static int sky2_rx_start(struct sky2_port *sky2)
1304 {
1305 struct sky2_hw *hw = sky2->hw;
1306 struct rx_ring_info *re;
1307 unsigned rxq = rxqaddr[sky2->port];
1308 unsigned i, size, thresh;
1309
1310 sky2->rx_put = sky2->rx_next = 0;
1311 sky2_qset(hw, rxq);
1312
1313 /* On PCI express lowering the watermark gives better performance */
1314 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
1315 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1316
1317 /* These chips have no ram buffer?
1318 * MAC Rx RAM Read is controlled by hardware */
1319 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1320 (hw->chip_rev == CHIP_REV_YU_EC_U_A1
1321 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
1322 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
1323
1324 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1325
1326 if (!(hw->flags & SKY2_HW_NEW_LE))
1327 rx_set_checksum(sky2);
1328
1329 /* Space needed for frame data + headers rounded up */
1330 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1331
1332 /* Stopping point for hardware truncation */
1333 thresh = (size - 8) / sizeof(u32);
1334
1335 sky2->rx_nfrags = size >> PAGE_SHIFT;
1336 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1337
1338 /* Compute residue after pages */
1339 size -= sky2->rx_nfrags << PAGE_SHIFT;
1340
1341 /* Optimize to handle small packets and headers */
1342 if (size < copybreak)
1343 size = copybreak;
1344 if (size < ETH_HLEN)
1345 size = ETH_HLEN;
1346
1347 sky2->rx_data_size = size;
1348
1349 /* Fill Rx ring */
1350 for (i = 0; i < sky2->rx_pending; i++) {
1351 re = sky2->rx_ring + i;
1352
1353 re->skb = sky2_rx_alloc(sky2);
1354 if (!re->skb)
1355 goto nomem;
1356
1357 sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size);
1358 sky2_rx_submit(sky2, re);
1359 }
1360
1361 /*
1362 * The receiver hangs if it receives frames larger than the
1363 * packet buffer. As a workaround, truncate oversize frames, but
1364 * the register is limited to 9 bits, so if you do frames > 2052
1365 * you better get the MTU right!
1366 */
1367 if (thresh > 0x1ff)
1368 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1369 else {
1370 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1371 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1372 }
1373
1374 /* Tell chip about available buffers */
1375 sky2_rx_update(sky2, rxq);
1376 return 0;
1377 nomem:
1378 sky2_rx_clean(sky2);
1379 return -ENOMEM;
1380 }
1381
1382 /* Bring up network interface. */
1383 static int sky2_up(struct net_device *dev)
1384 {
1385 struct sky2_port *sky2 = netdev_priv(dev);
1386 struct sky2_hw *hw = sky2->hw;
1387 unsigned port = sky2->port;
1388 u32 imask, ramsize;
1389 int cap, err = -ENOMEM;
1390 struct net_device *otherdev = hw->dev[sky2->port^1];
1391
1392 /*
1393 * On dual port PCI-X card, there is an problem where status
1394 * can be received out of order due to split transactions
1395 */
1396 if (otherdev && netif_running(otherdev) &&
1397 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1398 u16 cmd;
1399
1400 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1401 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1402 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1403
1404 }
1405
1406 if (netif_msg_ifup(sky2))
1407 printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
1408
1409 netif_carrier_off(dev);
1410
1411 /* must be power of 2 */
1412 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1413 TX_RING_SIZE *
1414 sizeof(struct sky2_tx_le),
1415 &sky2->tx_le_map);
1416 if (!sky2->tx_le)
1417 goto err_out;
1418
1419 sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
1420 GFP_KERNEL);
1421 if (!sky2->tx_ring)
1422 goto err_out;
1423
1424 tx_init(sky2);
1425
1426 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1427 &sky2->rx_le_map);
1428 if (!sky2->rx_le)
1429 goto err_out;
1430 memset(sky2->rx_le, 0, RX_LE_BYTES);
1431
1432 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1433 GFP_KERNEL);
1434 if (!sky2->rx_ring)
1435 goto err_out;
1436
1437 sky2_mac_init(hw, port);
1438
1439 /* Register is number of 4K blocks on internal RAM buffer. */
1440 ramsize = sky2_read8(hw, B2_E_0) * 4;
1441 if (ramsize > 0) {
1442 u32 rxspace;
1443
1444 hw->flags |= SKY2_HW_RAM_BUFFER;
1445 pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
1446 if (ramsize < 16)
1447 rxspace = ramsize / 2;
1448 else
1449 rxspace = 8 + (2*(ramsize - 16))/3;
1450
1451 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1452 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1453
1454 /* Make sure SyncQ is disabled */
1455 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1456 RB_RST_SET);
1457 }
1458
1459 sky2_qset(hw, txqaddr[port]);
1460
1461 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
1462 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
1463 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
1464
1465 /* Set almost empty threshold */
1466 if (hw->chip_id == CHIP_ID_YUKON_EC_U
1467 && hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1468 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
1469
1470 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1471 TX_RING_SIZE - 1);
1472
1473 #ifdef SKY2_VLAN_TAG_USED
1474 sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
1475 #endif
1476
1477 err = sky2_rx_start(sky2);
1478 if (err)
1479 goto err_out;
1480
1481 /* Enable interrupts from phy/mac for port */
1482 imask = sky2_read32(hw, B0_IMSK);
1483 imask |= portirq_msk[port];
1484 sky2_write32(hw, B0_IMSK, imask);
1485
1486 sky2_set_multicast(dev);
1487 return 0;
1488
1489 err_out:
1490 if (sky2->rx_le) {
1491 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1492 sky2->rx_le, sky2->rx_le_map);
1493 sky2->rx_le = NULL;
1494 }
1495 if (sky2->tx_le) {
1496 pci_free_consistent(hw->pdev,
1497 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1498 sky2->tx_le, sky2->tx_le_map);
1499 sky2->tx_le = NULL;
1500 }
1501 kfree(sky2->tx_ring);
1502 kfree(sky2->rx_ring);
1503
1504 sky2->tx_ring = NULL;
1505 sky2->rx_ring = NULL;
1506 return err;
1507 }
1508
1509 /* Modular subtraction in ring */
1510 static inline int tx_dist(unsigned tail, unsigned head)
1511 {
1512 return (head - tail) & (TX_RING_SIZE - 1);
1513 }
1514
1515 /* Number of list elements available for next tx */
1516 static inline int tx_avail(const struct sky2_port *sky2)
1517 {
1518 return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
1519 }
1520
1521 /* Estimate of number of transmit list elements required */
1522 static unsigned tx_le_req(const struct sk_buff *skb)
1523 {
1524 unsigned count;
1525
1526 count = sizeof(dma_addr_t) / sizeof(u32);
1527 count += skb_shinfo(skb)->nr_frags * count;
1528
1529 if (skb_is_gso(skb))
1530 ++count;
1531
1532 if (skb->ip_summed == CHECKSUM_PARTIAL)
1533 ++count;
1534
1535 return count;
1536 }
1537
1538 /*
1539 * Put one packet in ring for transmit.
1540 * A single packet can generate multiple list elements, and
1541 * the number of ring elements will probably be less than the number
1542 * of list elements used.
1543 */
1544 static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
1545 {
1546 struct sky2_port *sky2 = netdev_priv(dev);
1547 struct sky2_hw *hw = sky2->hw;
1548 struct sky2_tx_le *le = NULL;
1549 struct tx_ring_info *re;
1550 unsigned i, len;
1551 dma_addr_t mapping;
1552 u16 mss;
1553 u8 ctrl;
1554
1555 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1556 return NETDEV_TX_BUSY;
1557
1558 if (unlikely(netif_msg_tx_queued(sky2)))
1559 printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
1560 dev->name, sky2->tx_prod, skb->len);
1561
1562 len = skb_headlen(skb);
1563 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1564
1565 /* Send high bits if needed */
1566 if (sizeof(dma_addr_t) > sizeof(u32)) {
1567 le = get_tx_le(sky2);
1568 le->addr = cpu_to_le32(upper_32_bits(mapping));
1569 le->opcode = OP_ADDR64 | HW_OWNER;
1570 }
1571
1572 /* Check for TCP Segmentation Offload */
1573 mss = skb_shinfo(skb)->gso_size;
1574 if (mss != 0) {
1575
1576 if (!(hw->flags & SKY2_HW_NEW_LE))
1577 mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
1578
1579 if (mss != sky2->tx_last_mss) {
1580 le = get_tx_le(sky2);
1581 le->addr = cpu_to_le32(mss);
1582
1583 if (hw->flags & SKY2_HW_NEW_LE)
1584 le->opcode = OP_MSS | HW_OWNER;
1585 else
1586 le->opcode = OP_LRGLEN | HW_OWNER;
1587 sky2->tx_last_mss = mss;
1588 }
1589 }
1590
1591 ctrl = 0;
1592 #ifdef SKY2_VLAN_TAG_USED
1593 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1594 if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
1595 if (!le) {
1596 le = get_tx_le(sky2);
1597 le->addr = 0;
1598 le->opcode = OP_VLAN|HW_OWNER;
1599 } else
1600 le->opcode |= OP_VLAN;
1601 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1602 ctrl |= INS_VLAN;
1603 }
1604 #endif
1605
1606 /* Handle TCP checksum offload */
1607 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1608 /* On Yukon EX (some versions) encoding change. */
1609 if (hw->flags & SKY2_HW_AUTO_TX_SUM)
1610 ctrl |= CALSUM; /* auto checksum */
1611 else {
1612 const unsigned offset = skb_transport_offset(skb);
1613 u32 tcpsum;
1614
1615 tcpsum = offset << 16; /* sum start */
1616 tcpsum |= offset + skb->csum_offset; /* sum write */
1617
1618 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1619 if (ip_hdr(skb)->protocol == IPPROTO_UDP)
1620 ctrl |= UDPTCP;
1621
1622 if (tcpsum != sky2->tx_tcpsum) {
1623 sky2->tx_tcpsum = tcpsum;
1624
1625 le = get_tx_le(sky2);
1626 le->addr = cpu_to_le32(tcpsum);
1627 le->length = 0; /* initial checksum value */
1628 le->ctrl = 1; /* one packet */
1629 le->opcode = OP_TCPLISW | HW_OWNER;
1630 }
1631 }
1632 }
1633
1634 le = get_tx_le(sky2);
1635 le->addr = cpu_to_le32((u32) mapping);
1636 le->length = cpu_to_le16(len);
1637 le->ctrl = ctrl;
1638 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1639
1640 re = tx_le_re(sky2, le);
1641 re->skb = skb;
1642 pci_unmap_addr_set(re, mapaddr, mapping);
1643 pci_unmap_len_set(re, maplen, len);
1644
1645 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1646 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1647
1648 mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
1649 frag->size, PCI_DMA_TODEVICE);
1650
1651 if (sizeof(dma_addr_t) > sizeof(u32)) {
1652 le = get_tx_le(sky2);
1653 le->addr = cpu_to_le32(upper_32_bits(mapping));
1654 le->ctrl = 0;
1655 le->opcode = OP_ADDR64 | HW_OWNER;
1656 }
1657
1658 le = get_tx_le(sky2);
1659 le->addr = cpu_to_le32((u32) mapping);
1660 le->length = cpu_to_le16(frag->size);
1661 le->ctrl = ctrl;
1662 le->opcode = OP_BUFFER | HW_OWNER;
1663
1664 re = tx_le_re(sky2, le);
1665 re->skb = skb;
1666 pci_unmap_addr_set(re, mapaddr, mapping);
1667 pci_unmap_len_set(re, maplen, frag->size);
1668 }
1669
1670 le->ctrl |= EOP;
1671
1672 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1673 netif_stop_queue(dev);
1674
1675 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1676
1677 dev->trans_start = jiffies;
1678 return NETDEV_TX_OK;
1679 }
1680
1681 /*
1682 * Free ring elements from starting at tx_cons until "done"
1683 *
1684 * NB: the hardware will tell us about partial completion of multi-part
1685 * buffers so make sure not to free skb to early.
1686 */
1687 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1688 {
1689 struct net_device *dev = sky2->netdev;
1690 struct pci_dev *pdev = sky2->hw->pdev;
1691 unsigned idx;
1692
1693 BUG_ON(done >= TX_RING_SIZE);
1694
1695 for (idx = sky2->tx_cons; idx != done;
1696 idx = RING_NEXT(idx, TX_RING_SIZE)) {
1697 struct sky2_tx_le *le = sky2->tx_le + idx;
1698 struct tx_ring_info *re = sky2->tx_ring + idx;
1699
1700 switch(le->opcode & ~HW_OWNER) {
1701 case OP_LARGESEND:
1702 case OP_PACKET:
1703 pci_unmap_single(pdev,
1704 pci_unmap_addr(re, mapaddr),
1705 pci_unmap_len(re, maplen),
1706 PCI_DMA_TODEVICE);
1707 break;
1708 case OP_BUFFER:
1709 pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
1710 pci_unmap_len(re, maplen),
1711 PCI_DMA_TODEVICE);
1712 break;
1713 }
1714
1715 if (le->ctrl & EOP) {
1716 if (unlikely(netif_msg_tx_done(sky2)))
1717 printk(KERN_DEBUG "%s: tx done %u\n",
1718 dev->name, idx);
1719
1720 dev->stats.tx_packets++;
1721 dev->stats.tx_bytes += re->skb->len;
1722
1723 dev_kfree_skb_any(re->skb);
1724 sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
1725 }
1726 }
1727
1728 sky2->tx_cons = idx;
1729 smp_mb();
1730
1731 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
1732 netif_wake_queue(dev);
1733 }
1734
1735 /* Cleanup all untransmitted buffers, assume transmitter not running */
1736 static void sky2_tx_clean(struct net_device *dev)
1737 {
1738 struct sky2_port *sky2 = netdev_priv(dev);
1739
1740 netif_tx_lock_bh(dev);
1741 sky2_tx_complete(sky2, sky2->tx_prod);
1742 netif_tx_unlock_bh(dev);
1743 }
1744
1745 /* Network shutdown */
1746 static int sky2_down(struct net_device *dev)
1747 {
1748 struct sky2_port *sky2 = netdev_priv(dev);
1749 struct sky2_hw *hw = sky2->hw;
1750 unsigned port = sky2->port;
1751 u16 ctrl;
1752 u32 imask;
1753
1754 /* Never really got started! */
1755 if (!sky2->tx_le)
1756 return 0;
1757
1758 if (netif_msg_ifdown(sky2))
1759 printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
1760
1761 /* Disable port IRQ */
1762 imask = sky2_read32(hw, B0_IMSK);
1763 imask &= ~portirq_msk[port];
1764 sky2_write32(hw, B0_IMSK, imask);
1765
1766 synchronize_irq(hw->pdev->irq);
1767
1768 sky2_gmac_reset(hw, port);
1769
1770 /* Stop transmitter */
1771 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
1772 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
1773
1774 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
1775 RB_RST_SET | RB_DIS_OP_MD);
1776
1777 ctrl = gma_read16(hw, port, GM_GP_CTRL);
1778 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
1779 gma_write16(hw, port, GM_GP_CTRL, ctrl);
1780
1781 /* Make sure no packets are pending */
1782 napi_synchronize(&hw->napi);
1783
1784 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
1785
1786 /* Workaround shared GMAC reset */
1787 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
1788 && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
1789 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
1790
1791 /* Disable Force Sync bit and Enable Alloc bit */
1792 sky2_write8(hw, SK_REG(port, TXA_CTRL),
1793 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
1794
1795 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
1796 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
1797 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
1798
1799 /* Reset the PCI FIFO of the async Tx queue */
1800 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
1801 BMU_RST_SET | BMU_FIFO_RST);
1802
1803 /* Reset the Tx prefetch units */
1804 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
1805 PREF_UNIT_RST_SET);
1806
1807 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
1808
1809 sky2_rx_stop(sky2);
1810
1811 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
1812 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
1813
1814 sky2_phy_power_down(hw, port);
1815
1816 /* turn off LED's */
1817 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
1818
1819 sky2_tx_clean(dev);
1820 sky2_rx_clean(sky2);
1821
1822 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1823 sky2->rx_le, sky2->rx_le_map);
1824 kfree(sky2->rx_ring);
1825
1826 pci_free_consistent(hw->pdev,
1827 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1828 sky2->tx_le, sky2->tx_le_map);
1829 kfree(sky2->tx_ring);
1830
1831 sky2->tx_le = NULL;
1832 sky2->rx_le = NULL;
1833
1834 sky2->rx_ring = NULL;
1835 sky2->tx_ring = NULL;
1836
1837 return 0;
1838 }
1839
1840 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
1841 {
1842 if (hw->flags & SKY2_HW_FIBRE_PHY)
1843 return SPEED_1000;
1844
1845 if (!(hw->flags & SKY2_HW_GIGABIT)) {
1846 if (aux & PHY_M_PS_SPEED_100)
1847 return SPEED_100;
1848 else
1849 return SPEED_10;
1850 }
1851
1852 switch (aux & PHY_M_PS_SPEED_MSK) {
1853 case PHY_M_PS_SPEED_1000:
1854 return SPEED_1000;
1855 case PHY_M_PS_SPEED_100:
1856 return SPEED_100;
1857 default:
1858 return SPEED_10;
1859 }
1860 }
1861
1862 static void sky2_link_up(struct sky2_port *sky2)
1863 {
1864 struct sky2_hw *hw = sky2->hw;
1865 unsigned port = sky2->port;
1866 u16 reg;
1867 static const char *fc_name[] = {
1868 [FC_NONE] = "none",
1869 [FC_TX] = "tx",
1870 [FC_RX] = "rx",
1871 [FC_BOTH] = "both",
1872 };
1873
1874 /* enable Rx/Tx */
1875 reg = gma_read16(hw, port, GM_GP_CTRL);
1876 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
1877 gma_write16(hw, port, GM_GP_CTRL, reg);
1878
1879 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
1880
1881 netif_carrier_on(sky2->netdev);
1882
1883 mod_timer(&hw->watchdog_timer, jiffies + 1);
1884
1885 /* Turn on link LED */
1886 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
1887 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
1888
1889 if (netif_msg_link(sky2))
1890 printk(KERN_INFO PFX
1891 "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
1892 sky2->netdev->name, sky2->speed,
1893 sky2->duplex == DUPLEX_FULL ? "full" : "half",
1894 fc_name[sky2->flow_status]);
1895 }
1896
1897 static void sky2_link_down(struct sky2_port *sky2)
1898 {
1899 struct sky2_hw *hw = sky2->hw;
1900 unsigned port = sky2->port;
1901 u16 reg;
1902
1903 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
1904
1905 reg = gma_read16(hw, port, GM_GP_CTRL);
1906 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
1907 gma_write16(hw, port, GM_GP_CTRL, reg);
1908
1909 netif_carrier_off(sky2->netdev);
1910
1911 /* Turn on link LED */
1912 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
1913
1914 if (netif_msg_link(sky2))
1915 printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
1916
1917 sky2_phy_init(hw, port);
1918 }
1919
1920 static enum flow_control sky2_flow(int rx, int tx)
1921 {
1922 if (rx)
1923 return tx ? FC_BOTH : FC_RX;
1924 else
1925 return tx ? FC_TX : FC_NONE;
1926 }
1927
1928 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
1929 {
1930 struct sky2_hw *hw = sky2->hw;
1931 unsigned port = sky2->port;
1932 u16 advert, lpa;
1933
1934 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
1935 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
1936 if (lpa & PHY_M_AN_RF) {
1937 printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
1938 return -1;
1939 }
1940
1941 if (!(aux & PHY_M_PS_SPDUP_RES)) {
1942 printk(KERN_ERR PFX "%s: speed/duplex mismatch",
1943 sky2->netdev->name);
1944 return -1;
1945 }
1946
1947 sky2->speed = sky2_phy_speed(hw, aux);
1948 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1949
1950 /* Since the pause result bits seem to in different positions on
1951 * different chips. look at registers.
1952 */
1953 if (hw->flags & SKY2_HW_FIBRE_PHY) {
1954 /* Shift for bits in fiber PHY */
1955 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
1956 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
1957
1958 if (advert & ADVERTISE_1000XPAUSE)
1959 advert |= ADVERTISE_PAUSE_CAP;
1960 if (advert & ADVERTISE_1000XPSE_ASYM)
1961 advert |= ADVERTISE_PAUSE_ASYM;
1962 if (lpa & LPA_1000XPAUSE)
1963 lpa |= LPA_PAUSE_CAP;
1964 if (lpa & LPA_1000XPAUSE_ASYM)
1965 lpa |= LPA_PAUSE_ASYM;
1966 }
1967
1968 sky2->flow_status = FC_NONE;
1969 if (advert & ADVERTISE_PAUSE_CAP) {
1970 if (lpa & LPA_PAUSE_CAP)
1971 sky2->flow_status = FC_BOTH;
1972 else if (advert & ADVERTISE_PAUSE_ASYM)
1973 sky2->flow_status = FC_RX;
1974 } else if (advert & ADVERTISE_PAUSE_ASYM) {
1975 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
1976 sky2->flow_status = FC_TX;
1977 }
1978
1979 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
1980 && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
1981 sky2->flow_status = FC_NONE;
1982
1983 if (sky2->flow_status & FC_TX)
1984 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
1985 else
1986 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
1987
1988 return 0;
1989 }
1990
1991 /* Interrupt from PHY */
1992 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
1993 {
1994 struct net_device *dev = hw->dev[port];
1995 struct sky2_port *sky2 = netdev_priv(dev);
1996 u16 istatus, phystat;
1997
1998 if (!netif_running(dev))
1999 return;
2000
2001 spin_lock(&sky2->phy_lock);
2002 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
2003 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
2004
2005 if (netif_msg_intr(sky2))
2006 printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
2007 sky2->netdev->name, istatus, phystat);
2008
2009 if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) {
2010 if (sky2_autoneg_done(sky2, phystat) == 0)
2011 sky2_link_up(sky2);
2012 goto out;
2013 }
2014
2015 if (istatus & PHY_M_IS_LSP_CHANGE)
2016 sky2->speed = sky2_phy_speed(hw, phystat);
2017
2018 if (istatus & PHY_M_IS_DUP_CHANGE)
2019 sky2->duplex =
2020 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2021
2022 if (istatus & PHY_M_IS_LST_CHANGE) {
2023 if (phystat & PHY_M_PS_LINK_UP)
2024 sky2_link_up(sky2);
2025 else
2026 sky2_link_down(sky2);
2027 }
2028 out:
2029 spin_unlock(&sky2->phy_lock);
2030 }
2031
2032 /* Transmit timeout is only called if we are running, carrier is up
2033 * and tx queue is full (stopped).
2034 */
2035 static void sky2_tx_timeout(struct net_device *dev)
2036 {
2037 struct sky2_port *sky2 = netdev_priv(dev);
2038 struct sky2_hw *hw = sky2->hw;
2039
2040 if (netif_msg_timer(sky2))
2041 printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
2042
2043 printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
2044 dev->name, sky2->tx_cons, sky2->tx_prod,
2045 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
2046 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
2047
2048 /* can't restart safely under softirq */
2049 schedule_work(&hw->restart_work);
2050 }
2051
2052 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
2053 {
2054 struct sky2_port *sky2 = netdev_priv(dev);
2055 struct sky2_hw *hw = sky2->hw;
2056 unsigned port = sky2->port;
2057 int err;
2058 u16 ctl, mode;
2059 u32 imask;
2060
2061 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
2062 return -EINVAL;
2063
2064 if (new_mtu > ETH_DATA_LEN &&
2065 (hw->chip_id == CHIP_ID_YUKON_FE ||
2066 hw->chip_id == CHIP_ID_YUKON_FE_P))
2067 return -EINVAL;
2068
2069 if (!netif_running(dev)) {
2070 dev->mtu = new_mtu;
2071 return 0;
2072 }
2073
2074 imask = sky2_read32(hw, B0_IMSK);
2075 sky2_write32(hw, B0_IMSK, 0);
2076
2077 dev->trans_start = jiffies; /* prevent tx timeout */
2078 netif_stop_queue(dev);
2079 napi_disable(&hw->napi);
2080
2081 synchronize_irq(hw->pdev->irq);
2082
2083 if (!(hw->flags & SKY2_HW_RAM_BUFFER))
2084 sky2_set_tx_stfwd(hw, port);
2085
2086 ctl = gma_read16(hw, port, GM_GP_CTRL);
2087 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
2088 sky2_rx_stop(sky2);
2089 sky2_rx_clean(sky2);
2090
2091 dev->mtu = new_mtu;
2092
2093 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
2094 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
2095
2096 if (dev->mtu > ETH_DATA_LEN)
2097 mode |= GM_SMOD_JUMBO_ENA;
2098
2099 gma_write16(hw, port, GM_SERIAL_MODE, mode);
2100
2101 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
2102
2103 err = sky2_rx_start(sky2);
2104 sky2_write32(hw, B0_IMSK, imask);
2105
2106 sky2_read32(hw, B0_Y2_SP_LISR);
2107 napi_enable(&hw->napi);
2108
2109 if (err)
2110 dev_close(dev);
2111 else {
2112 gma_write16(hw, port, GM_GP_CTRL, ctl);
2113
2114 netif_wake_queue(dev);
2115 }
2116
2117 return err;
2118 }
2119
2120 /* For small just reuse existing skb for next receive */
2121 static struct sk_buff *receive_copy(struct sky2_port *sky2,
2122 const struct rx_ring_info *re,
2123 unsigned length)
2124 {
2125 struct sk_buff *skb;
2126
2127 skb = netdev_alloc_skb(sky2->netdev, length + 2);
2128 if (likely(skb)) {
2129 skb_reserve(skb, 2);
2130 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
2131 length, PCI_DMA_FROMDEVICE);
2132 skb_copy_from_linear_data(re->skb, skb->data, length);
2133 skb->ip_summed = re->skb->ip_summed;
2134 skb->csum = re->skb->csum;
2135 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
2136 length, PCI_DMA_FROMDEVICE);
2137 re->skb->ip_summed = CHECKSUM_NONE;
2138 skb_put(skb, length);
2139 }
2140 return skb;
2141 }
2142
2143 /* Adjust length of skb with fragments to match received data */
2144 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
2145 unsigned int length)
2146 {
2147 int i, num_frags;
2148 unsigned int size;
2149
2150 /* put header into skb */
2151 size = min(length, hdr_space);
2152 skb->tail += size;
2153 skb->len += size;
2154 length -= size;
2155
2156 num_frags = skb_shinfo(skb)->nr_frags;
2157 for (i = 0; i < num_frags; i++) {
2158 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2159
2160 if (length == 0) {
2161 /* don't need this page */
2162 __free_page(frag->page);
2163 --skb_shinfo(skb)->nr_frags;
2164 } else {
2165 size = min(length, (unsigned) PAGE_SIZE);
2166
2167 frag->size = size;
2168 skb->data_len += size;
2169 skb->truesize += size;
2170 skb->len += size;
2171 length -= size;
2172 }
2173 }
2174 }
2175
2176 /* Normal packet - take skb from ring element and put in a new one */
2177 static struct sk_buff *receive_new(struct sky2_port *sky2,
2178 struct rx_ring_info *re,
2179 unsigned int length)
2180 {
2181 struct sk_buff *skb, *nskb;
2182 unsigned hdr_space = sky2->rx_data_size;
2183
2184 /* Don't be tricky about reusing pages (yet) */
2185 nskb = sky2_rx_alloc(sky2);
2186 if (unlikely(!nskb))
2187 return NULL;
2188
2189 skb = re->skb;
2190 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2191
2192 prefetch(skb->data);
2193 re->skb = nskb;
2194 sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space);
2195
2196 if (skb_shinfo(skb)->nr_frags)
2197 skb_put_frags(skb, hdr_space, length);
2198 else
2199 skb_put(skb, length);
2200 return skb;
2201 }
2202
2203 /*
2204 * Receive one packet.
2205 * For larger packets, get new buffer.
2206 */
2207 static struct sk_buff *sky2_receive(struct net_device *dev,
2208 u16 length, u32 status)
2209 {
2210 struct sky2_port *sky2 = netdev_priv(dev);
2211 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2212 struct sk_buff *skb = NULL;
2213 u16 count = (status & GMR_FS_LEN) >> 16;
2214
2215 #ifdef SKY2_VLAN_TAG_USED
2216 /* Account for vlan tag */
2217 if (sky2->vlgrp && (status & GMR_FS_VLAN))
2218 count -= VLAN_HLEN;
2219 #endif
2220
2221 if (unlikely(netif_msg_rx_status(sky2)))
2222 printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
2223 dev->name, sky2->rx_next, status, length);
2224
2225 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2226 prefetch(sky2->rx_ring + sky2->rx_next);
2227
2228 /* This chip has hardware problems that generates bogus status.
2229 * So do only marginal checking and expect higher level protocols
2230 * to handle crap frames.
2231 */
2232 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
2233 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
2234 length != count)
2235 goto okay;
2236
2237 if (status & GMR_FS_ANY_ERR)
2238 goto error;
2239
2240 if (!(status & GMR_FS_RX_OK))
2241 goto resubmit;
2242
2243 /* if length reported by DMA does not match PHY, packet was truncated */
2244 if (length != count)
2245 goto len_error;
2246
2247 okay:
2248 if (length < copybreak)
2249 skb = receive_copy(sky2, re, length);
2250 else
2251 skb = receive_new(sky2, re, length);
2252 resubmit:
2253 sky2_rx_submit(sky2, re);
2254
2255 return skb;
2256
2257 len_error:
2258 /* Truncation of overlength packets
2259 causes PHY length to not match MAC length */
2260 ++dev->stats.rx_length_errors;
2261 if (netif_msg_rx_err(sky2) && net_ratelimit())
2262 pr_info(PFX "%s: rx length error: status %#x length %d\n",
2263 dev->name, status, length);
2264 goto resubmit;
2265
2266 error:
2267 ++dev->stats.rx_errors;
2268 if (status & GMR_FS_RX_FF_OV) {
2269 dev->stats.rx_over_errors++;
2270 goto resubmit;
2271 }
2272
2273 if (netif_msg_rx_err(sky2) && net_ratelimit())
2274 printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
2275 dev->name, status, length);
2276
2277 if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
2278 dev->stats.rx_length_errors++;
2279 if (status & GMR_FS_FRAGMENT)
2280 dev->stats.rx_frame_errors++;
2281 if (status & GMR_FS_CRC_ERR)
2282 dev->stats.rx_crc_errors++;
2283
2284 goto resubmit;
2285 }
2286
2287 /* Transmit complete */
2288 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2289 {
2290 struct sky2_port *sky2 = netdev_priv(dev);
2291
2292 if (netif_running(dev)) {
2293 netif_tx_lock(dev);
2294 sky2_tx_complete(sky2, last);
2295 netif_tx_unlock(dev);
2296 }
2297 }
2298
2299 /* Process status response ring */
2300 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
2301 {
2302 int work_done = 0;
2303 unsigned rx[2] = { 0, 0 };
2304
2305 rmb();
2306 do {
2307 struct sky2_port *sky2;
2308 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2309 unsigned port;
2310 struct net_device *dev;
2311 struct sk_buff *skb;
2312 u32 status;
2313 u16 length;
2314 u8 opcode = le->opcode;
2315
2316 if (!(opcode & HW_OWNER))
2317 break;
2318
2319 hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
2320
2321 port = le->css & CSS_LINK_BIT;
2322 dev = hw->dev[port];
2323 sky2 = netdev_priv(dev);
2324 length = le16_to_cpu(le->length);
2325 status = le32_to_cpu(le->status);
2326
2327 le->opcode = 0;
2328 switch (opcode & ~HW_OWNER) {
2329 case OP_RXSTAT:
2330 ++rx[port];
2331 skb = sky2_receive(dev, length, status);
2332 if (unlikely(!skb)) {
2333 dev->stats.rx_dropped++;
2334 break;
2335 }
2336
2337 /* This chip reports checksum status differently */
2338 if (hw->flags & SKY2_HW_NEW_LE) {
2339 if (sky2->rx_csum &&
2340 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
2341 (le->css & CSS_TCPUDPCSOK))
2342 skb->ip_summed = CHECKSUM_UNNECESSARY;
2343 else
2344 skb->ip_summed = CHECKSUM_NONE;
2345 }
2346
2347 skb->protocol = eth_type_trans(skb, dev);
2348 dev->stats.rx_packets++;
2349 dev->stats.rx_bytes += skb->len;
2350 dev->last_rx = jiffies;
2351
2352 #ifdef SKY2_VLAN_TAG_USED
2353 if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
2354 vlan_hwaccel_receive_skb(skb,
2355 sky2->vlgrp,
2356 be16_to_cpu(sky2->rx_tag));
2357 } else
2358 #endif
2359 netif_receive_skb(skb);
2360
2361 /* Stop after net poll weight */
2362 if (++work_done >= to_do)
2363 goto exit_loop;
2364 break;
2365
2366 #ifdef SKY2_VLAN_TAG_USED
2367 case OP_RXVLAN:
2368 sky2->rx_tag = length;
2369 break;
2370
2371 case OP_RXCHKSVLAN:
2372 sky2->rx_tag = length;
2373 /* fall through */
2374 #endif
2375 case OP_RXCHKS:
2376 if (!sky2->rx_csum)
2377 break;
2378
2379 /* If this happens then driver assuming wrong format */
2380 if (unlikely(hw->flags & SKY2_HW_NEW_LE)) {
2381 if (net_ratelimit())
2382 printk(KERN_NOTICE "%s: unexpected"
2383 " checksum status\n",
2384 dev->name);
2385 break;
2386 }
2387
2388 /* Both checksum counters are programmed to start at
2389 * the same offset, so unless there is a problem they
2390 * should match. This failure is an early indication that
2391 * hardware receive checksumming won't work.
2392 */
2393 if (likely(status >> 16 == (status & 0xffff))) {
2394 skb = sky2->rx_ring[sky2->rx_next].skb;
2395 skb->ip_summed = CHECKSUM_COMPLETE;
2396 skb->csum = status & 0xffff;
2397 } else {
2398 printk(KERN_NOTICE PFX "%s: hardware receive "
2399 "checksum problem (status = %#x)\n",
2400 dev->name, status);
2401 sky2->rx_csum = 0;
2402 sky2_write32(sky2->hw,
2403 Q_ADDR(rxqaddr[port], Q_CSR),
2404 BMU_DIS_RX_CHKSUM);
2405 }
2406 break;
2407
2408 case OP_TXINDEXLE:
2409 /* TX index reports status for both ports */
2410 BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
2411 sky2_tx_done(hw->dev[0], status & 0xfff);
2412 if (hw->dev[1])
2413 sky2_tx_done(hw->dev[1],
2414 ((status >> 24) & 0xff)
2415 | (u16)(length & 0xf) << 8);
2416 break;
2417
2418 default:
2419 if (net_ratelimit())
2420 printk(KERN_WARNING PFX
2421 "unknown status opcode 0x%x\n", opcode);
2422 }
2423 } while (hw->st_idx != idx);
2424
2425 /* Fully processed status ring so clear irq */
2426 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2427
2428 exit_loop:
2429 if (rx[0])
2430 sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
2431
2432 if (rx[1])
2433 sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
2434
2435 return work_done;
2436 }
2437
2438 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2439 {
2440 struct net_device *dev = hw->dev[port];
2441
2442 if (net_ratelimit())
2443 printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
2444 dev->name, status);
2445
2446 if (status & Y2_IS_PAR_RD1) {
2447 if (net_ratelimit())
2448 printk(KERN_ERR PFX "%s: ram data read parity error\n",
2449 dev->name);
2450 /* Clear IRQ */
2451 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2452 }
2453
2454 if (status & Y2_IS_PAR_WR1) {
2455 if (net_ratelimit())
2456 printk(KERN_ERR PFX "%s: ram data write parity error\n",
2457 dev->name);
2458
2459 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2460 }
2461
2462 if (status & Y2_IS_PAR_MAC1) {
2463 if (net_ratelimit())
2464 printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
2465 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2466 }
2467
2468 if (status & Y2_IS_PAR_RX1) {
2469 if (net_ratelimit())
2470 printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
2471 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2472 }
2473
2474 if (status & Y2_IS_TCP_TXA1) {
2475 if (net_ratelimit())
2476 printk(KERN_ERR PFX "%s: TCP segmentation error\n",
2477 dev->name);
2478 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2479 }
2480 }
2481
2482 static void sky2_hw_intr(struct sky2_hw *hw)
2483 {
2484 struct pci_dev *pdev = hw->pdev;
2485 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2486 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2487
2488 status &= hwmsk;
2489
2490 if (status & Y2_IS_TIST_OV)
2491 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2492
2493 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2494 u16 pci_err;
2495
2496 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2497 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2498 if (net_ratelimit())
2499 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
2500 pci_err);
2501
2502 sky2_pci_write16(hw, PCI_STATUS,
2503 pci_err | PCI_STATUS_ERROR_BITS);
2504 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2505 }
2506
2507 if (status & Y2_IS_PCI_EXP) {
2508 /* PCI-Express uncorrectable Error occurred */
2509 u32 err;
2510
2511 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2512 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2513 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2514 0xfffffffful);
2515 if (net_ratelimit())
2516 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
2517
2518 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2519 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2520 }
2521
2522 if (status & Y2_HWE_L1_MASK)
2523 sky2_hw_error(hw, 0, status);
2524 status >>= 8;
2525 if (status & Y2_HWE_L1_MASK)
2526 sky2_hw_error(hw, 1, status);
2527 }
2528
2529 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2530 {
2531 struct net_device *dev = hw->dev[port];
2532 struct sky2_port *sky2 = netdev_priv(dev);
2533 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2534
2535 if (netif_msg_intr(sky2))
2536 printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
2537 dev->name, status);
2538
2539 if (status & GM_IS_RX_CO_OV)
2540 gma_read16(hw, port, GM_RX_IRQ_SRC);
2541
2542 if (status & GM_IS_TX_CO_OV)
2543 gma_read16(hw, port, GM_TX_IRQ_SRC);
2544
2545 if (status & GM_IS_RX_FF_OR) {
2546 ++dev->stats.rx_fifo_errors;
2547 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2548 }
2549
2550 if (status & GM_IS_TX_FF_UR) {
2551 ++dev->stats.tx_fifo_errors;
2552 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2553 }
2554 }
2555
2556 /* This should never happen it is a bug. */
2557 static void sky2_le_error(struct sky2_hw *hw, unsigned port,
2558 u16 q, unsigned ring_size)
2559 {
2560 struct net_device *dev = hw->dev[port];
2561 struct sky2_port *sky2 = netdev_priv(dev);
2562 unsigned idx;
2563 const u64 *le = (q == Q_R1 || q == Q_R2)
2564 ? (u64 *) sky2->rx_le : (u64 *) sky2->tx_le;
2565
2566 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
2567 printk(KERN_ERR PFX "%s: descriptor error q=%#x get=%u [%llx] put=%u\n",
2568 dev->name, (unsigned) q, idx, (unsigned long long) le[idx],
2569 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
2570
2571 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
2572 }
2573
2574 static int sky2_rx_hung(struct net_device *dev)
2575 {
2576 struct sky2_port *sky2 = netdev_priv(dev);
2577 struct sky2_hw *hw = sky2->hw;
2578 unsigned port = sky2->port;
2579 unsigned rxq = rxqaddr[port];
2580 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
2581 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
2582 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
2583 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
2584
2585 /* If idle and MAC or PCI is stuck */
2586 if (sky2->check.last == dev->last_rx &&
2587 ((mac_rp == sky2->check.mac_rp &&
2588 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
2589 /* Check if the PCI RX hang */
2590 (fifo_rp == sky2->check.fifo_rp &&
2591 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
2592 printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
2593 dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
2594 sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
2595 return 1;
2596 } else {
2597 sky2->check.last = dev->last_rx;
2598 sky2->check.mac_rp = mac_rp;
2599 sky2->check.mac_lev = mac_lev;
2600 sky2->check.fifo_rp = fifo_rp;
2601 sky2->check.fifo_lev = fifo_lev;
2602 return 0;
2603 }
2604 }
2605
2606 static void sky2_watchdog(unsigned long arg)
2607 {
2608 struct sky2_hw *hw = (struct sky2_hw *) arg;
2609
2610 /* Check for lost IRQ once a second */
2611 if (sky2_read32(hw, B0_ISRC)) {
2612 napi_schedule(&hw->napi);
2613 } else {
2614 int i, active = 0;
2615
2616 for (i = 0; i < hw->ports; i++) {
2617 struct net_device *dev = hw->dev[i];
2618 if (!netif_running(dev))
2619 continue;
2620 ++active;
2621
2622 /* For chips with Rx FIFO, check if stuck */
2623 if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
2624 sky2_rx_hung(dev)) {
2625 pr_info(PFX "%s: receiver hang detected\n",
2626 dev->name);
2627 schedule_work(&hw->restart_work);
2628 return;
2629 }
2630 }
2631
2632 if (active == 0)
2633 return;
2634 }
2635
2636 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
2637 }
2638
2639 /* Hardware/software error handling */
2640 static void sky2_err_intr(struct sky2_hw *hw, u32 status)
2641 {
2642 if (net_ratelimit())
2643 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
2644
2645 if (status & Y2_IS_HW_ERR)
2646 sky2_hw_intr(hw);
2647
2648 if (status & Y2_IS_IRQ_MAC1)
2649 sky2_mac_intr(hw, 0);
2650
2651 if (status & Y2_IS_IRQ_MAC2)
2652 sky2_mac_intr(hw, 1);
2653
2654 if (status & Y2_IS_CHK_RX1)
2655 sky2_le_error(hw, 0, Q_R1, RX_LE_SIZE);
2656
2657 if (status & Y2_IS_CHK_RX2)
2658 sky2_le_error(hw, 1, Q_R2, RX_LE_SIZE);
2659
2660 if (status & Y2_IS_CHK_TXA1)
2661 sky2_le_error(hw, 0, Q_XA1, TX_RING_SIZE);
2662
2663 if (status & Y2_IS_CHK_TXA2)
2664 sky2_le_error(hw, 1, Q_XA2, TX_RING_SIZE);
2665 }
2666
2667 static int sky2_poll(struct napi_struct *napi, int work_limit)
2668 {
2669 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
2670 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2671 int work_done = 0;
2672 u16 idx;
2673
2674 if (unlikely(status & Y2_IS_ERROR))
2675 sky2_err_intr(hw, status);
2676
2677 if (status & Y2_IS_IRQ_PHY1)
2678 sky2_phy_intr(hw, 0);
2679
2680 if (status & Y2_IS_IRQ_PHY2)
2681 sky2_phy_intr(hw, 1);
2682
2683 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
2684 work_done += sky2_status_intr(hw, work_limit - work_done, idx);
2685
2686 if (work_done >= work_limit)
2687 goto done;
2688 }
2689
2690 /* Bug/Errata workaround?
2691 * Need to kick the TX irq moderation timer.
2692 */
2693 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
2694 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
2695 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2696 }
2697 napi_complete(napi);
2698 sky2_read32(hw, B0_Y2_SP_LISR);
2699 done:
2700
2701 return work_done;
2702 }
2703
2704 static irqreturn_t sky2_intr(int irq, void *dev_id)
2705 {
2706 struct sky2_hw *hw = dev_id;
2707 u32 status;
2708
2709 /* Reading this mask interrupts as side effect */
2710 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
2711 if (status == 0 || status == ~0)
2712 return IRQ_NONE;
2713
2714 prefetch(&hw->st_le[hw->st_idx]);
2715
2716 napi_schedule(&hw->napi);
2717
2718 return IRQ_HANDLED;
2719 }
2720
2721 #ifdef CONFIG_NET_POLL_CONTROLLER
2722 static void sky2_netpoll(struct net_device *dev)
2723 {
2724 struct sky2_port *sky2 = netdev_priv(dev);
2725
2726 napi_schedule(&sky2->hw->napi);
2727 }
2728 #endif
2729
2730 /* Chip internal frequency for clock calculations */
2731 static u32 sky2_mhz(const struct sky2_hw *hw)
2732 {
2733 switch (hw->chip_id) {
2734 case CHIP_ID_YUKON_EC:
2735 case CHIP_ID_YUKON_EC_U:
2736 case CHIP_ID_YUKON_EX:
2737 case CHIP_ID_YUKON_SUPR:
2738 case CHIP_ID_YUKON_UL_2:
2739 return 125;
2740
2741 case CHIP_ID_YUKON_FE:
2742 return 100;
2743
2744 case CHIP_ID_YUKON_FE_P:
2745 return 50;
2746
2747 case CHIP_ID_YUKON_XL:
2748 return 156;
2749
2750 default:
2751 BUG();
2752 }
2753 }
2754
2755 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
2756 {
2757 return sky2_mhz(hw) * us;
2758 }
2759
2760 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
2761 {
2762 return clk / sky2_mhz(hw);
2763 }
2764
2765
2766 static int __devinit sky2_init(struct sky2_hw *hw)
2767 {
2768 u8 t8;
2769
2770 /* Enable all clocks and check for bad PCI access */
2771 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
2772
2773 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2774
2775 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
2776 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
2777
2778 switch(hw->chip_id) {
2779 case CHIP_ID_YUKON_XL:
2780 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
2781 break;
2782
2783 case CHIP_ID_YUKON_EC_U:
2784 hw->flags = SKY2_HW_GIGABIT
2785 | SKY2_HW_NEWER_PHY
2786 | SKY2_HW_ADV_POWER_CTL;
2787 break;
2788
2789 case CHIP_ID_YUKON_EX:
2790 hw->flags = SKY2_HW_GIGABIT
2791 | SKY2_HW_NEWER_PHY
2792 | SKY2_HW_NEW_LE
2793 | SKY2_HW_ADV_POWER_CTL;
2794
2795 /* New transmit checksum */
2796 if (hw->chip_rev != CHIP_REV_YU_EX_B0)
2797 hw->flags |= SKY2_HW_AUTO_TX_SUM;
2798 break;
2799
2800 case CHIP_ID_YUKON_EC:
2801 /* This rev is really old, and requires untested workarounds */
2802 if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
2803 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
2804 return -EOPNOTSUPP;
2805 }
2806 hw->flags = SKY2_HW_GIGABIT;
2807 break;
2808
2809 case CHIP_ID_YUKON_FE:
2810 break;
2811
2812 case CHIP_ID_YUKON_FE_P:
2813 hw->flags = SKY2_HW_NEWER_PHY
2814 | SKY2_HW_NEW_LE
2815 | SKY2_HW_AUTO_TX_SUM
2816 | SKY2_HW_ADV_POWER_CTL;
2817 break;
2818
2819 case CHIP_ID_YUKON_SUPR:
2820 hw->flags = SKY2_HW_GIGABIT
2821 | SKY2_HW_NEWER_PHY
2822 | SKY2_HW_NEW_LE
2823 | SKY2_HW_AUTO_TX_SUM
2824 | SKY2_HW_ADV_POWER_CTL;
2825 break;
2826
2827 case CHIP_ID_YUKON_UL_2:
2828 hw->flags = SKY2_HW_GIGABIT
2829 | SKY2_HW_ADV_POWER_CTL;
2830 break;
2831
2832 default:
2833 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
2834 hw->chip_id);
2835 return -EOPNOTSUPP;
2836 }
2837
2838 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
2839 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
2840 hw->flags |= SKY2_HW_FIBRE_PHY;
2841
2842 hw->ports = 1;
2843 t8 = sky2_read8(hw, B2_Y2_HW_RES);
2844 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
2845 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
2846 ++hw->ports;
2847 }
2848
2849 return 0;
2850 }
2851
2852 static void sky2_reset(struct sky2_hw *hw)
2853 {
2854 struct pci_dev *pdev = hw->pdev;
2855 u16 status;
2856 int i, cap;
2857 u32 hwe_mask = Y2_HWE_ALL_MASK;
2858
2859 /* disable ASF */
2860 if (hw->chip_id == CHIP_ID_YUKON_EX) {
2861 status = sky2_read16(hw, HCU_CCSR);
2862 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
2863 HCU_CCSR_UC_STATE_MSK);
2864 sky2_write16(hw, HCU_CCSR, status);
2865 } else
2866 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
2867 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
2868
2869 /* do a SW reset */
2870 sky2_write8(hw, B0_CTST, CS_RST_SET);
2871 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2872
2873 /* allow writes to PCI config */
2874 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2875
2876 /* clear PCI errors, if any */
2877 status = sky2_pci_read16(hw, PCI_STATUS);
2878 status |= PCI_STATUS_ERROR_BITS;
2879 sky2_pci_write16(hw, PCI_STATUS, status);
2880
2881 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
2882
2883 cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
2884 if (cap) {
2885 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2886 0xfffffffful);
2887
2888 /* If error bit is stuck on ignore it */
2889 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
2890 dev_info(&pdev->dev, "ignoring stuck error report bit\n");
2891 else
2892 hwe_mask |= Y2_IS_PCI_EXP;
2893 }
2894
2895 sky2_power_on(hw);
2896 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2897
2898 for (i = 0; i < hw->ports; i++) {
2899 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
2900 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
2901
2902 if (hw->chip_id == CHIP_ID_YUKON_EX ||
2903 hw->chip_id == CHIP_ID_YUKON_SUPR)
2904 sky2_write16(hw, SK_REG(i, GMAC_CTRL),
2905 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
2906 | GMC_BYP_RETR_ON);
2907 }
2908
2909 /* Clear I2C IRQ noise */
2910 sky2_write32(hw, B2_I2C_IRQ, 1);
2911
2912 /* turn off hardware timer (unused) */
2913 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
2914 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
2915
2916 sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
2917
2918 /* Turn off descriptor polling */
2919 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
2920
2921 /* Turn off receive timestamp */
2922 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
2923 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2924
2925 /* enable the Tx Arbiters */
2926 for (i = 0; i < hw->ports; i++)
2927 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
2928
2929 /* Initialize ram interface */
2930 for (i = 0; i < hw->ports; i++) {
2931 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
2932
2933 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
2934 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
2935 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
2936 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
2937 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
2938 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
2939 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
2940 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
2941 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
2942 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
2943 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
2944 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
2945 }
2946
2947 sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
2948
2949 for (i = 0; i < hw->ports; i++)
2950 sky2_gmac_reset(hw, i);
2951
2952 memset(hw->st_le, 0, STATUS_LE_BYTES);
2953 hw->st_idx = 0;
2954
2955 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
2956 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
2957
2958 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
2959 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
2960
2961 /* Set the list last index */
2962 sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1);
2963
2964 sky2_write16(hw, STAT_TX_IDX_TH, 10);
2965 sky2_write8(hw, STAT_FIFO_WM, 16);
2966
2967 /* set Status-FIFO ISR watermark */
2968 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
2969 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
2970 else
2971 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
2972
2973 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
2974 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
2975 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
2976
2977 /* enable status unit */
2978 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
2979
2980 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2981 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
2982 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
2983 }
2984
2985 static void sky2_restart(struct work_struct *work)
2986 {
2987 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
2988 struct net_device *dev;
2989 int i, err;
2990
2991 rtnl_lock();
2992 for (i = 0; i < hw->ports; i++) {
2993 dev = hw->dev[i];
2994 if (netif_running(dev))
2995 sky2_down(dev);
2996 }
2997
2998 napi_disable(&hw->napi);
2999 sky2_write32(hw, B0_IMSK, 0);
3000 sky2_reset(hw);
3001 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3002 napi_enable(&hw->napi);
3003
3004 for (i = 0; i < hw->ports; i++) {
3005 dev = hw->dev[i];
3006 if (netif_running(dev)) {
3007 err = sky2_up(dev);
3008 if (err) {
3009 printk(KERN_INFO PFX "%s: could not restart %d\n",
3010 dev->name, err);
3011 dev_close(dev);
3012 }
3013 }
3014 }
3015
3016 rtnl_unlock();
3017 }
3018
3019 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
3020 {
3021 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
3022 }
3023
3024 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3025 {
3026 const struct sky2_port *sky2 = netdev_priv(dev);
3027
3028 wol->supported = sky2_wol_supported(sky2->hw);
3029 wol->wolopts = sky2->wol;
3030 }
3031
3032 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3033 {
3034 struct sky2_port *sky2 = netdev_priv(dev);
3035 struct sky2_hw *hw = sky2->hw;
3036
3037 if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
3038 return -EOPNOTSUPP;
3039
3040 sky2->wol = wol->wolopts;
3041
3042 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
3043 hw->chip_id == CHIP_ID_YUKON_EX ||
3044 hw->chip_id == CHIP_ID_YUKON_FE_P)
3045 sky2_write32(hw, B0_CTST, sky2->wol
3046 ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
3047
3048 if (!netif_running(dev))
3049 sky2_wol_init(sky2);
3050 return 0;
3051 }
3052
3053 static u32 sky2_supported_modes(const struct sky2_hw *hw)
3054 {
3055 if (sky2_is_copper(hw)) {
3056 u32 modes = SUPPORTED_10baseT_Half
3057 | SUPPORTED_10baseT_Full
3058 | SUPPORTED_100baseT_Half
3059 | SUPPORTED_100baseT_Full
3060 | SUPPORTED_Autoneg | SUPPORTED_TP;
3061
3062 if (hw->flags & SKY2_HW_GIGABIT)
3063 modes |= SUPPORTED_1000baseT_Half
3064 | SUPPORTED_1000baseT_Full;
3065 return modes;
3066 } else
3067 return SUPPORTED_1000baseT_Half
3068 | SUPPORTED_1000baseT_Full
3069 | SUPPORTED_Autoneg
3070 | SUPPORTED_FIBRE;
3071 }
3072
3073 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3074 {
3075 struct sky2_port *sky2 = netdev_priv(dev);
3076 struct sky2_hw *hw = sky2->hw;
3077
3078 ecmd->transceiver = XCVR_INTERNAL;
3079 ecmd->supported = sky2_supported_modes(hw);
3080 ecmd->phy_address = PHY_ADDR_MARV;
3081 if (sky2_is_copper(hw)) {
3082 ecmd->port = PORT_TP;
3083 ecmd->speed = sky2->speed;
3084 } else {
3085 ecmd->speed = SPEED_1000;
3086 ecmd->port = PORT_FIBRE;
3087 }
3088
3089 ecmd->advertising = sky2->advertising;
3090 ecmd->autoneg = sky2->autoneg;
3091 ecmd->duplex = sky2->duplex;
3092 return 0;
3093 }
3094
3095 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3096 {
3097 struct sky2_port *sky2 = netdev_priv(dev);
3098 const struct sky2_hw *hw = sky2->hw;
3099 u32 supported = sky2_supported_modes(hw);
3100
3101 if (ecmd->autoneg == AUTONEG_ENABLE) {
3102 ecmd->advertising = supported;
3103 sky2->duplex = -1;
3104 sky2->speed = -1;
3105 } else {
3106 u32 setting;
3107
3108 switch (ecmd->speed) {
3109 case SPEED_1000:
3110 if (ecmd->duplex == DUPLEX_FULL)
3111 setting = SUPPORTED_1000baseT_Full;
3112 else if (ecmd->duplex == DUPLEX_HALF)
3113 setting = SUPPORTED_1000baseT_Half;
3114 else
3115 return -EINVAL;
3116 break;
3117 case SPEED_100:
3118 if (ecmd->duplex == DUPLEX_FULL)
3119 setting = SUPPORTED_100baseT_Full;
3120 else if (ecmd->duplex == DUPLEX_HALF)
3121 setting = SUPPORTED_100baseT_Half;
3122 else
3123 return -EINVAL;
3124 break;
3125
3126 case SPEED_10:
3127 if (ecmd->duplex == DUPLEX_FULL)
3128 setting = SUPPORTED_10baseT_Full;
3129 else if (ecmd->duplex == DUPLEX_HALF)
3130 setting = SUPPORTED_10baseT_Half;
3131 else
3132 return -EINVAL;
3133 break;
3134 default:
3135 return -EINVAL;
3136 }
3137
3138 if ((setting & supported) == 0)
3139 return -EINVAL;
3140
3141 sky2->speed = ecmd->speed;
3142 sky2->duplex = ecmd->duplex;
3143 }
3144
3145 sky2->autoneg = ecmd->autoneg;
3146 sky2->advertising = ecmd->advertising;
3147
3148 if (netif_running(dev)) {
3149 sky2_phy_reinit(sky2);
3150 sky2_set_multicast(dev);
3151 }
3152
3153 return 0;
3154 }
3155
3156 static void sky2_get_drvinfo(struct net_device *dev,
3157 struct ethtool_drvinfo *info)
3158 {
3159 struct sky2_port *sky2 = netdev_priv(dev);
3160
3161 strcpy(info->driver, DRV_NAME);
3162 strcpy(info->version, DRV_VERSION);
3163 strcpy(info->fw_version, "N/A");
3164 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
3165 }
3166
3167 static const struct sky2_stat {
3168 char name[ETH_GSTRING_LEN];
3169 u16 offset;
3170 } sky2_stats[] = {
3171 { "tx_bytes", GM_TXO_OK_HI },
3172 { "rx_bytes", GM_RXO_OK_HI },
3173 { "tx_broadcast", GM_TXF_BC_OK },
3174 { "rx_broadcast", GM_RXF_BC_OK },
3175 { "tx_multicast", GM_TXF_MC_OK },
3176 { "rx_multicast", GM_RXF_MC_OK },
3177 { "tx_unicast", GM_TXF_UC_OK },
3178 { "rx_unicast", GM_RXF_UC_OK },
3179 { "tx_mac_pause", GM_TXF_MPAUSE },
3180 { "rx_mac_pause", GM_RXF_MPAUSE },
3181 { "collisions", GM_TXF_COL },
3182 { "late_collision",GM_TXF_LAT_COL },
3183 { "aborted", GM_TXF_ABO_COL },
3184 { "single_collisions", GM_TXF_SNG_COL },
3185 { "multi_collisions", GM_TXF_MUL_COL },
3186
3187 { "rx_short", GM_RXF_SHT },
3188 { "rx_runt", GM_RXE_FRAG },
3189 { "rx_64_byte_packets", GM_RXF_64B },
3190 { "rx_65_to_127_byte_packets", GM_RXF_127B },
3191 { "rx_128_to_255_byte_packets", GM_RXF_255B },
3192 { "rx_256_to_511_byte_packets", GM_RXF_511B },
3193 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
3194 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
3195 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
3196 { "rx_too_long", GM_RXF_LNG_ERR },
3197 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
3198 { "rx_jabber", GM_RXF_JAB_PKT },
3199 { "rx_fcs_error", GM_RXF_FCS_ERR },
3200
3201 { "tx_64_byte_packets", GM_TXF_64B },
3202 { "tx_65_to_127_byte_packets", GM_TXF_127B },
3203 { "tx_128_to_255_byte_packets", GM_TXF_255B },
3204 { "tx_256_to_511_byte_packets", GM_TXF_511B },
3205 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
3206 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
3207 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
3208 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
3209 };
3210
3211 static u32 sky2_get_rx_csum(struct net_device *dev)
3212 {
3213 struct sky2_port *sky2 = netdev_priv(dev);
3214
3215 return sky2->rx_csum;
3216 }
3217
3218 static int sky2_set_rx_csum(struct net_device *dev, u32 data)
3219 {
3220 struct sky2_port *sky2 = netdev_priv(dev);
3221
3222 sky2->rx_csum = data;
3223
3224 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
3225 data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
3226
3227 return 0;
3228 }
3229
3230 static u32 sky2_get_msglevel(struct net_device *netdev)
3231 {
3232 struct sky2_port *sky2 = netdev_priv(netdev);
3233 return sky2->msg_enable;
3234 }
3235
3236 static int sky2_nway_reset(struct net_device *dev)
3237 {
3238 struct sky2_port *sky2 = netdev_priv(dev);
3239
3240 if (!netif_running(dev) || sky2->autoneg != AUTONEG_ENABLE)
3241 return -EINVAL;
3242
3243 sky2_phy_reinit(sky2);
3244 sky2_set_multicast(dev);
3245
3246 return 0;
3247 }
3248
3249 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
3250 {
3251 struct sky2_hw *hw = sky2->hw;
3252 unsigned port = sky2->port;
3253 int i;
3254
3255 data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
3256 | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
3257 data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
3258 | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
3259
3260 for (i = 2; i < count; i++)
3261 data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
3262 }
3263
3264 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
3265 {
3266 struct sky2_port *sky2 = netdev_priv(netdev);
3267 sky2->msg_enable = value;
3268 }
3269
3270 static int sky2_get_sset_count(struct net_device *dev, int sset)
3271 {
3272 switch (sset) {
3273 case ETH_SS_STATS:
3274 return ARRAY_SIZE(sky2_stats);
3275 default:
3276 return -EOPNOTSUPP;
3277 }
3278 }
3279
3280 static void sky2_get_ethtool_stats(struct net_device *dev,
3281 struct ethtool_stats *stats, u64 * data)
3282 {
3283 struct sky2_port *sky2 = netdev_priv(dev);
3284
3285 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
3286 }
3287
3288 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
3289 {
3290 int i;
3291
3292 switch (stringset) {
3293 case ETH_SS_STATS:
3294 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
3295 memcpy(data + i * ETH_GSTRING_LEN,
3296 sky2_stats[i].name, ETH_GSTRING_LEN);
3297 break;
3298 }
3299 }
3300
3301 static int sky2_set_mac_address(struct net_device *dev, void *p)
3302 {
3303 struct sky2_port *sky2 = netdev_priv(dev);
3304 struct sky2_hw *hw = sky2->hw;
3305 unsigned port = sky2->port;
3306 const struct sockaddr *addr = p;
3307
3308 if (!is_valid_ether_addr(addr->sa_data))
3309 return -EADDRNOTAVAIL;
3310
3311 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
3312 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
3313 dev->dev_addr, ETH_ALEN);
3314 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
3315 dev->dev_addr, ETH_ALEN);
3316
3317 /* virtual address for data */
3318 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
3319
3320 /* physical address: used for pause frames */
3321 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
3322
3323 return 0;
3324 }
3325
3326 static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
3327 {
3328 u32 bit;
3329
3330 bit = ether_crc(ETH_ALEN, addr) & 63;
3331 filter[bit >> 3] |= 1 << (bit & 7);
3332 }
3333
3334 static void sky2_set_multicast(struct net_device *dev)
3335 {
3336 struct sky2_port *sky2 = netdev_priv(dev);
3337 struct sky2_hw *hw = sky2->hw;
3338 unsigned port = sky2->port;
3339 struct dev_mc_list *list = dev->mc_list;
3340 u16 reg;
3341 u8 filter[8];
3342 int rx_pause;
3343 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3344
3345 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3346 memset(filter, 0, sizeof(filter));
3347
3348 reg = gma_read16(hw, port, GM_RX_CTRL);
3349 reg |= GM_RXCR_UCF_ENA;
3350
3351 if (dev->flags & IFF_PROMISC) /* promiscuous */
3352 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3353 else if (dev->flags & IFF_ALLMULTI)
3354 memset(filter, 0xff, sizeof(filter));
3355 else if (dev->mc_count == 0 && !rx_pause)
3356 reg &= ~GM_RXCR_MCF_ENA;
3357 else {
3358 int i;
3359 reg |= GM_RXCR_MCF_ENA;
3360
3361 if (rx_pause)
3362 sky2_add_filter(filter, pause_mc_addr);
3363
3364 for (i = 0; list && i < dev->mc_count; i++, list = list->next)
3365 sky2_add_filter(filter, list->dmi_addr);
3366 }
3367
3368 gma_write16(hw, port, GM_MC_ADDR_H1,
3369 (u16) filter[0] | ((u16) filter[1] << 8));
3370 gma_write16(hw, port, GM_MC_ADDR_H2,
3371 (u16) filter[2] | ((u16) filter[3] << 8));
3372 gma_write16(hw, port, GM_MC_ADDR_H3,
3373 (u16) filter[4] | ((u16) filter[5] << 8));
3374 gma_write16(hw, port, GM_MC_ADDR_H4,
3375 (u16) filter[6] | ((u16) filter[7] << 8));
3376
3377 gma_write16(hw, port, GM_RX_CTRL, reg);
3378 }
3379
3380 /* Can have one global because blinking is controlled by
3381 * ethtool and that is always under RTNL mutex
3382 */
3383 static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
3384 {
3385 struct sky2_hw *hw = sky2->hw;
3386 unsigned port = sky2->port;
3387
3388 spin_lock_bh(&sky2->phy_lock);
3389 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
3390 hw->chip_id == CHIP_ID_YUKON_EX ||
3391 hw->chip_id == CHIP_ID_YUKON_SUPR) {
3392 u16 pg;
3393 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3394 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3395
3396 switch (mode) {
3397 case MO_LED_OFF:
3398 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3399 PHY_M_LEDC_LOS_CTRL(8) |
3400 PHY_M_LEDC_INIT_CTRL(8) |
3401 PHY_M_LEDC_STA1_CTRL(8) |
3402 PHY_M_LEDC_STA0_CTRL(8));
3403 break;
3404 case MO_LED_ON:
3405 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3406 PHY_M_LEDC_LOS_CTRL(9) |
3407 PHY_M_LEDC_INIT_CTRL(9) |
3408 PHY_M_LEDC_STA1_CTRL(9) |
3409 PHY_M_LEDC_STA0_CTRL(9));
3410 break;
3411 case MO_LED_BLINK:
3412 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3413 PHY_M_LEDC_LOS_CTRL(0xa) |
3414 PHY_M_LEDC_INIT_CTRL(0xa) |
3415 PHY_M_LEDC_STA1_CTRL(0xa) |
3416 PHY_M_LEDC_STA0_CTRL(0xa));
3417 break;
3418 case MO_LED_NORM:
3419 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3420 PHY_M_LEDC_LOS_CTRL(1) |
3421 PHY_M_LEDC_INIT_CTRL(8) |
3422 PHY_M_LEDC_STA1_CTRL(7) |
3423 PHY_M_LEDC_STA0_CTRL(7));
3424 }
3425
3426 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3427 } else
3428 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3429 PHY_M_LED_MO_DUP(mode) |
3430 PHY_M_LED_MO_10(mode) |
3431 PHY_M_LED_MO_100(mode) |
3432 PHY_M_LED_MO_1000(mode) |
3433 PHY_M_LED_MO_RX(mode) |
3434 PHY_M_LED_MO_TX(mode));
3435
3436 spin_unlock_bh(&sky2->phy_lock);
3437 }
3438
3439 /* blink LED's for finding board */
3440 static int sky2_phys_id(struct net_device *dev, u32 data)
3441 {
3442 struct sky2_port *sky2 = netdev_priv(dev);
3443 unsigned int i;
3444
3445 if (data == 0)
3446 data = UINT_MAX;
3447
3448 for (i = 0; i < data; i++) {
3449 sky2_led(sky2, MO_LED_ON);
3450 if (msleep_interruptible(500))
3451 break;
3452 sky2_led(sky2, MO_LED_OFF);
3453 if (msleep_interruptible(500))
3454 break;
3455 }
3456 sky2_led(sky2, MO_LED_NORM);
3457
3458 return 0;
3459 }
3460
3461 static void sky2_get_pauseparam(struct net_device *dev,
3462 struct ethtool_pauseparam *ecmd)
3463 {
3464 struct sky2_port *sky2 = netdev_priv(dev);
3465
3466 switch (sky2->flow_mode) {
3467 case FC_NONE:
3468 ecmd->tx_pause = ecmd->rx_pause = 0;
3469 break;
3470 case FC_TX:
3471 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
3472 break;
3473 case FC_RX:
3474 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
3475 break;
3476 case FC_BOTH:
3477 ecmd->tx_pause = ecmd->rx_pause = 1;
3478 }
3479
3480 ecmd->autoneg = sky2->autoneg;
3481 }
3482
3483 static int sky2_set_pauseparam(struct net_device *dev,
3484 struct ethtool_pauseparam *ecmd)
3485 {
3486 struct sky2_port *sky2 = netdev_priv(dev);
3487
3488 sky2->autoneg = ecmd->autoneg;
3489 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
3490
3491 if (netif_running(dev))
3492 sky2_phy_reinit(sky2);
3493
3494 return 0;
3495 }
3496
3497 static int sky2_get_coalesce(struct net_device *dev,
3498 struct ethtool_coalesce *ecmd)
3499 {
3500 struct sky2_port *sky2 = netdev_priv(dev);
3501 struct sky2_hw *hw = sky2->hw;
3502
3503 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
3504 ecmd->tx_coalesce_usecs = 0;
3505 else {
3506 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
3507 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
3508 }
3509 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
3510
3511 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
3512 ecmd->rx_coalesce_usecs = 0;
3513 else {
3514 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
3515 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
3516 }
3517 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
3518
3519 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
3520 ecmd->rx_coalesce_usecs_irq = 0;
3521 else {
3522 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
3523 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
3524 }
3525
3526 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
3527
3528 return 0;
3529 }
3530
3531 /* Note: this affect both ports */
3532 static int sky2_set_coalesce(struct net_device *dev,
3533 struct ethtool_coalesce *ecmd)
3534 {
3535 struct sky2_port *sky2 = netdev_priv(dev);
3536 struct sky2_hw *hw = sky2->hw;
3537 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
3538
3539 if (ecmd->tx_coalesce_usecs > tmax ||
3540 ecmd->rx_coalesce_usecs > tmax ||
3541 ecmd->rx_coalesce_usecs_irq > tmax)
3542 return -EINVAL;
3543
3544 if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
3545 return -EINVAL;
3546 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
3547 return -EINVAL;
3548 if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
3549 return -EINVAL;
3550
3551 if (ecmd->tx_coalesce_usecs == 0)
3552 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
3553 else {
3554 sky2_write32(hw, STAT_TX_TIMER_INI,
3555 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
3556 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3557 }
3558 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
3559
3560 if (ecmd->rx_coalesce_usecs == 0)
3561 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
3562 else {
3563 sky2_write32(hw, STAT_LEV_TIMER_INI,
3564 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
3565 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3566 }
3567 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
3568
3569 if (ecmd->rx_coalesce_usecs_irq == 0)
3570 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
3571 else {
3572 sky2_write32(hw, STAT_ISR_TIMER_INI,
3573 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
3574 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3575 }
3576 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
3577 return 0;
3578 }
3579
3580 static void sky2_get_ringparam(struct net_device *dev,
3581 struct ethtool_ringparam *ering)
3582 {
3583 struct sky2_port *sky2 = netdev_priv(dev);
3584
3585 ering->rx_max_pending = RX_MAX_PENDING;
3586 ering->rx_mini_max_pending = 0;
3587 ering->rx_jumbo_max_pending = 0;
3588 ering->tx_max_pending = TX_RING_SIZE - 1;
3589
3590 ering->rx_pending = sky2->rx_pending;
3591 ering->rx_mini_pending = 0;
3592 ering->rx_jumbo_pending = 0;
3593 ering->tx_pending = sky2->tx_pending;
3594 }
3595
3596 static int sky2_set_ringparam(struct net_device *dev,
3597 struct ethtool_ringparam *ering)
3598 {
3599 struct sky2_port *sky2 = netdev_priv(dev);
3600 int err = 0;
3601
3602 if (ering->rx_pending > RX_MAX_PENDING ||
3603 ering->rx_pending < 8 ||
3604 ering->tx_pending < MAX_SKB_TX_LE ||
3605 ering->tx_pending > TX_RING_SIZE - 1)
3606 return -EINVAL;
3607
3608 if (netif_running(dev))
3609 sky2_down(dev);
3610
3611 sky2->rx_pending = ering->rx_pending;
3612 sky2->tx_pending = ering->tx_pending;
3613
3614 if (netif_running(dev)) {
3615 err = sky2_up(dev);
3616 if (err)
3617 dev_close(dev);
3618 }
3619
3620 return err;
3621 }
3622
3623 static int sky2_get_regs_len(struct net_device *dev)
3624 {
3625 return 0x4000;
3626 }
3627
3628 /*
3629 * Returns copy of control register region
3630 * Note: ethtool_get_regs always provides full size (16k) buffer
3631 */
3632 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
3633 void *p)
3634 {
3635 const struct sky2_port *sky2 = netdev_priv(dev);
3636 const void __iomem *io = sky2->hw->regs;
3637 unsigned int b;
3638
3639 regs->version = 1;
3640
3641 for (b = 0; b < 128; b++) {
3642 /* This complicated switch statement is to make sure and
3643 * only access regions that are unreserved.
3644 * Some blocks are only valid on dual port cards.
3645 * and block 3 has some special diagnostic registers that
3646 * are poison.
3647 */
3648 switch (b) {
3649 case 3:
3650 /* skip diagnostic ram region */
3651 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
3652 break;
3653
3654 /* dual port cards only */
3655 case 5: /* Tx Arbiter 2 */
3656 case 9: /* RX2 */
3657 case 14 ... 15: /* TX2 */
3658 case 17: case 19: /* Ram Buffer 2 */
3659 case 22 ... 23: /* Tx Ram Buffer 2 */
3660 case 25: /* Rx MAC Fifo 1 */
3661 case 27: /* Tx MAC Fifo 2 */
3662 case 31: /* GPHY 2 */
3663 case 40 ... 47: /* Pattern Ram 2 */
3664 case 52: case 54: /* TCP Segmentation 2 */
3665 case 112 ... 116: /* GMAC 2 */
3666 if (sky2->hw->ports == 1)
3667 goto reserved;
3668 /* fall through */
3669 case 0: /* Control */
3670 case 2: /* Mac address */
3671 case 4: /* Tx Arbiter 1 */
3672 case 7: /* PCI express reg */
3673 case 8: /* RX1 */
3674 case 12 ... 13: /* TX1 */
3675 case 16: case 18:/* Rx Ram Buffer 1 */
3676 case 20 ... 21: /* Tx Ram Buffer 1 */
3677 case 24: /* Rx MAC Fifo 1 */
3678 case 26: /* Tx MAC Fifo 1 */
3679 case 28 ... 29: /* Descriptor and status unit */
3680 case 30: /* GPHY 1*/
3681 case 32 ... 39: /* Pattern Ram 1 */
3682 case 48: case 50: /* TCP Segmentation 1 */
3683 case 56 ... 60: /* PCI space */
3684 case 80 ... 84: /* GMAC 1 */
3685 memcpy_fromio(p, io, 128);
3686 break;
3687 default:
3688 reserved:
3689 memset(p, 0, 128);
3690 }
3691
3692 p += 128;
3693 io += 128;
3694 }
3695 }
3696
3697 /* In order to do Jumbo packets on these chips, need to turn off the
3698 * transmit store/forward. Therefore checksum offload won't work.
3699 */
3700 static int no_tx_offload(struct net_device *dev)
3701 {
3702 const struct sky2_port *sky2 = netdev_priv(dev);
3703 const struct sky2_hw *hw = sky2->hw;
3704
3705 return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U;
3706 }
3707
3708 static int sky2_set_tx_csum(struct net_device *dev, u32 data)
3709 {
3710 if (data && no_tx_offload(dev))
3711 return -EINVAL;
3712
3713 return ethtool_op_set_tx_csum(dev, data);
3714 }
3715
3716
3717 static int sky2_set_tso(struct net_device *dev, u32 data)
3718 {
3719 if (data && no_tx_offload(dev))
3720 return -EINVAL;
3721
3722 return ethtool_op_set_tso(dev, data);
3723 }
3724
3725 static int sky2_get_eeprom_len(struct net_device *dev)
3726 {
3727 struct sky2_port *sky2 = netdev_priv(dev);
3728 struct sky2_hw *hw = sky2->hw;
3729 u16 reg2;
3730
3731 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
3732 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
3733 }
3734
3735 static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
3736 {
3737 unsigned long start = jiffies;
3738
3739 while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
3740 /* Can take up to 10.6 ms for write */
3741 if (time_after(jiffies, start + HZ/4)) {
3742 dev_err(&hw->pdev->dev, PFX "VPD cycle timed out");
3743 return -ETIMEDOUT;
3744 }
3745 mdelay(1);
3746 }
3747
3748 return 0;
3749 }
3750
3751 static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
3752 u16 offset, size_t length)
3753 {
3754 int rc = 0;
3755
3756 while (length > 0) {
3757 u32 val;
3758
3759 sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
3760 rc = sky2_vpd_wait(hw, cap, 0);
3761 if (rc)
3762 break;
3763
3764 val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
3765
3766 memcpy(data, &val, min(sizeof(val), length));
3767 offset += sizeof(u32);
3768 data += sizeof(u32);
3769 length -= sizeof(u32);
3770 }
3771
3772 return rc;
3773 }
3774
3775 static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
3776 u16 offset, unsigned int length)
3777 {
3778 unsigned int i;
3779 int rc = 0;
3780
3781 for (i = 0; i < length; i += sizeof(u32)) {
3782 u32 val = *(u32 *)(data + i);
3783
3784 sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
3785 sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
3786
3787 rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
3788 if (rc)
3789 break;
3790 }
3791 return rc;
3792 }
3793
3794 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
3795 u8 *data)
3796 {
3797 struct sky2_port *sky2 = netdev_priv(dev);
3798 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
3799
3800 if (!cap)
3801 return -EINVAL;
3802
3803 eeprom->magic = SKY2_EEPROM_MAGIC;
3804
3805 return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
3806 }
3807
3808 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
3809 u8 *data)
3810 {
3811 struct sky2_port *sky2 = netdev_priv(dev);
3812 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
3813
3814 if (!cap)
3815 return -EINVAL;
3816
3817 if (eeprom->magic != SKY2_EEPROM_MAGIC)
3818 return -EINVAL;
3819
3820 /* Partial writes not supported */
3821 if ((eeprom->offset & 3) || (eeprom->len & 3))
3822 return -EINVAL;
3823
3824 return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
3825 }
3826
3827
3828 static const struct ethtool_ops sky2_ethtool_ops = {
3829 .get_settings = sky2_get_settings,
3830 .set_settings = sky2_set_settings,
3831 .get_drvinfo = sky2_get_drvinfo,
3832 .get_wol = sky2_get_wol,
3833 .set_wol = sky2_set_wol,
3834 .get_msglevel = sky2_get_msglevel,
3835 .set_msglevel = sky2_set_msglevel,
3836 .nway_reset = sky2_nway_reset,
3837 .get_regs_len = sky2_get_regs_len,
3838 .get_regs = sky2_get_regs,
3839 .get_link = ethtool_op_get_link,
3840 .get_eeprom_len = sky2_get_eeprom_len,
3841 .get_eeprom = sky2_get_eeprom,
3842 .set_eeprom = sky2_set_eeprom,
3843 .set_sg = ethtool_op_set_sg,
3844 .set_tx_csum = sky2_set_tx_csum,
3845 .set_tso = sky2_set_tso,
3846 .get_rx_csum = sky2_get_rx_csum,
3847 .set_rx_csum = sky2_set_rx_csum,
3848 .get_strings = sky2_get_strings,
3849 .get_coalesce = sky2_get_coalesce,
3850 .set_coalesce = sky2_set_coalesce,
3851 .get_ringparam = sky2_get_ringparam,
3852 .set_ringparam = sky2_set_ringparam,
3853 .get_pauseparam = sky2_get_pauseparam,
3854 .set_pauseparam = sky2_set_pauseparam,
3855 .phys_id = sky2_phys_id,
3856 .get_sset_count = sky2_get_sset_count,
3857 .get_ethtool_stats = sky2_get_ethtool_stats,
3858 };
3859
3860 #ifdef CONFIG_SKY2_DEBUG
3861
3862 static struct dentry *sky2_debug;
3863
3864 static int sky2_debug_show(struct seq_file *seq, void *v)
3865 {
3866 struct net_device *dev = seq->private;
3867 const struct sky2_port *sky2 = netdev_priv(dev);
3868 struct sky2_hw *hw = sky2->hw;
3869 unsigned port = sky2->port;
3870 unsigned idx, last;
3871 int sop;
3872
3873 if (!netif_running(dev))
3874 return -ENETDOWN;
3875
3876 seq_printf(seq, "IRQ src=%x mask=%x control=%x\n",
3877 sky2_read32(hw, B0_ISRC),
3878 sky2_read32(hw, B0_IMSK),
3879 sky2_read32(hw, B0_Y2_SP_ICR));
3880
3881 napi_disable(&hw->napi);
3882 last = sky2_read16(hw, STAT_PUT_IDX);
3883
3884 if (hw->st_idx == last)
3885 seq_puts(seq, "Status ring (empty)\n");
3886 else {
3887 seq_puts(seq, "Status ring\n");
3888 for (idx = hw->st_idx; idx != last && idx < STATUS_RING_SIZE;
3889 idx = RING_NEXT(idx, STATUS_RING_SIZE)) {
3890 const struct sky2_status_le *le = hw->st_le + idx;
3891 seq_printf(seq, "[%d] %#x %d %#x\n",
3892 idx, le->opcode, le->length, le->status);
3893 }
3894 seq_puts(seq, "\n");
3895 }
3896
3897 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
3898 sky2->tx_cons, sky2->tx_prod,
3899 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
3900 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
3901
3902 /* Dump contents of tx ring */
3903 sop = 1;
3904 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE;
3905 idx = RING_NEXT(idx, TX_RING_SIZE)) {
3906 const struct sky2_tx_le *le = sky2->tx_le + idx;
3907 u32 a = le32_to_cpu(le->addr);
3908
3909 if (sop)
3910 seq_printf(seq, "%u:", idx);
3911 sop = 0;
3912
3913 switch(le->opcode & ~HW_OWNER) {
3914 case OP_ADDR64:
3915 seq_printf(seq, " %#x:", a);
3916 break;
3917 case OP_LRGLEN:
3918 seq_printf(seq, " mtu=%d", a);
3919 break;
3920 case OP_VLAN:
3921 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
3922 break;
3923 case OP_TCPLISW:
3924 seq_printf(seq, " csum=%#x", a);
3925 break;
3926 case OP_LARGESEND:
3927 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
3928 break;
3929 case OP_PACKET:
3930 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
3931 break;
3932 case OP_BUFFER:
3933 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
3934 break;
3935 default:
3936 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
3937 a, le16_to_cpu(le->length));
3938 }
3939
3940 if (le->ctrl & EOP) {
3941 seq_putc(seq, '\n');
3942 sop = 1;
3943 }
3944 }
3945
3946 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
3947 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
3948 last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
3949 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
3950
3951 sky2_read32(hw, B0_Y2_SP_LISR);
3952 napi_enable(&hw->napi);
3953 return 0;
3954 }
3955
3956 static int sky2_debug_open(struct inode *inode, struct file *file)
3957 {
3958 return single_open(file, sky2_debug_show, inode->i_private);
3959 }
3960
3961 static const struct file_operations sky2_debug_fops = {
3962 .owner = THIS_MODULE,
3963 .open = sky2_debug_open,
3964 .read = seq_read,
3965 .llseek = seq_lseek,
3966 .release = single_release,
3967 };
3968
3969 /*
3970 * Use network device events to create/remove/rename
3971 * debugfs file entries
3972 */
3973 static int sky2_device_event(struct notifier_block *unused,
3974 unsigned long event, void *ptr)
3975 {
3976 struct net_device *dev = ptr;
3977 struct sky2_port *sky2 = netdev_priv(dev);
3978
3979 if (dev->open != sky2_up || !sky2_debug)
3980 return NOTIFY_DONE;
3981
3982 switch(event) {
3983 case NETDEV_CHANGENAME:
3984 if (sky2->debugfs) {
3985 sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
3986 sky2_debug, dev->name);
3987 }
3988 break;
3989
3990 case NETDEV_GOING_DOWN:
3991 if (sky2->debugfs) {
3992 printk(KERN_DEBUG PFX "%s: remove debugfs\n",
3993 dev->name);
3994 debugfs_remove(sky2->debugfs);
3995 sky2->debugfs = NULL;
3996 }
3997 break;
3998
3999 case NETDEV_UP:
4000 sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
4001 sky2_debug, dev,
4002 &sky2_debug_fops);
4003 if (IS_ERR(sky2->debugfs))
4004 sky2->debugfs = NULL;
4005 }
4006
4007 return NOTIFY_DONE;
4008 }
4009
4010 static struct notifier_block sky2_notifier = {
4011 .notifier_call = sky2_device_event,
4012 };
4013
4014
4015 static __init void sky2_debug_init(void)
4016 {
4017 struct dentry *ent;
4018
4019 ent = debugfs_create_dir("sky2", NULL);
4020 if (!ent || IS_ERR(ent))
4021 return;
4022
4023 sky2_debug = ent;
4024 register_netdevice_notifier(&sky2_notifier);
4025 }
4026
4027 static __exit void sky2_debug_cleanup(void)
4028 {
4029 if (sky2_debug) {
4030 unregister_netdevice_notifier(&sky2_notifier);
4031 debugfs_remove(sky2_debug);
4032 sky2_debug = NULL;
4033 }
4034 }
4035
4036 #else
4037 #define sky2_debug_init()
4038 #define sky2_debug_cleanup()
4039 #endif
4040
4041
4042 /* Initialize network device */
4043 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
4044 unsigned port,
4045 int highmem, int wol)
4046 {
4047 struct sky2_port *sky2;
4048 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
4049
4050 if (!dev) {
4051 dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
4052 return NULL;
4053 }
4054
4055 SET_NETDEV_DEV(dev, &hw->pdev->dev);
4056 dev->irq = hw->pdev->irq;
4057 dev->open = sky2_up;
4058 dev->stop = sky2_down;
4059 dev->do_ioctl = sky2_ioctl;
4060 dev->hard_start_xmit = sky2_xmit_frame;
4061 dev->set_multicast_list = sky2_set_multicast;
4062 dev->set_mac_address = sky2_set_mac_address;
4063 dev->change_mtu = sky2_change_mtu;
4064 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
4065 dev->tx_timeout = sky2_tx_timeout;
4066 dev->watchdog_timeo = TX_WATCHDOG;
4067 #ifdef CONFIG_NET_POLL_CONTROLLER
4068 if (port == 0)
4069 dev->poll_controller = sky2_netpoll;
4070 #endif
4071
4072 sky2 = netdev_priv(dev);
4073 sky2->netdev = dev;
4074 sky2->hw = hw;
4075 sky2->msg_enable = netif_msg_init(debug, default_msg);
4076
4077 /* Auto speed and flow control */
4078 sky2->autoneg = AUTONEG_ENABLE;
4079 sky2->flow_mode = FC_BOTH;
4080
4081 sky2->duplex = -1;
4082 sky2->speed = -1;
4083 sky2->advertising = sky2_supported_modes(hw);
4084 sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
4085 sky2->wol = wol;
4086
4087 spin_lock_init(&sky2->phy_lock);
4088 sky2->tx_pending = TX_DEF_PENDING;
4089 sky2->rx_pending = RX_DEF_PENDING;
4090
4091 hw->dev[port] = dev;
4092
4093 sky2->port = port;
4094
4095 dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
4096 if (highmem)
4097 dev->features |= NETIF_F_HIGHDMA;
4098
4099 #ifdef SKY2_VLAN_TAG_USED
4100 /* The workaround for FE+ status conflicts with VLAN tag detection. */
4101 if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
4102 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
4103 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
4104 dev->vlan_rx_register = sky2_vlan_rx_register;
4105 }
4106 #endif
4107
4108 /* read the mac address */
4109 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
4110 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
4111
4112 return dev;
4113 }
4114
4115 static void __devinit sky2_show_addr(struct net_device *dev)
4116 {
4117 const struct sky2_port *sky2 = netdev_priv(dev);
4118 DECLARE_MAC_BUF(mac);
4119
4120 if (netif_msg_probe(sky2))
4121 printk(KERN_INFO PFX "%s: addr %s\n",
4122 dev->name, print_mac(mac, dev->dev_addr));
4123 }
4124
4125 /* Handle software interrupt used during MSI test */
4126 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
4127 {
4128 struct sky2_hw *hw = dev_id;
4129 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
4130
4131 if (status == 0)
4132 return IRQ_NONE;
4133
4134 if (status & Y2_IS_IRQ_SW) {
4135 hw->flags |= SKY2_HW_USE_MSI;
4136 wake_up(&hw->msi_wait);
4137 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4138 }
4139 sky2_write32(hw, B0_Y2_SP_ICR, 2);
4140
4141 return IRQ_HANDLED;
4142 }
4143
4144 /* Test interrupt path by forcing a a software IRQ */
4145 static int __devinit sky2_test_msi(struct sky2_hw *hw)
4146 {
4147 struct pci_dev *pdev = hw->pdev;
4148 int err;
4149
4150 init_waitqueue_head (&hw->msi_wait);
4151
4152 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
4153
4154 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
4155 if (err) {
4156 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4157 return err;
4158 }
4159
4160 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
4161 sky2_read8(hw, B0_CTST);
4162
4163 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
4164
4165 if (!(hw->flags & SKY2_HW_USE_MSI)) {
4166 /* MSI test failed, go back to INTx mode */
4167 dev_info(&pdev->dev, "No interrupt generated using MSI, "
4168 "switching to INTx mode.\n");
4169
4170 err = -EOPNOTSUPP;
4171 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4172 }
4173
4174 sky2_write32(hw, B0_IMSK, 0);
4175 sky2_read32(hw, B0_IMSK);
4176
4177 free_irq(pdev->irq, hw);
4178
4179 return err;
4180 }
4181
4182 static int __devinit pci_wake_enabled(struct pci_dev *dev)
4183 {
4184 int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
4185 u16 value;
4186
4187 if (!pm)
4188 return 0;
4189 if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
4190 return 0;
4191 return value & PCI_PM_CTRL_PME_ENABLE;
4192 }
4193
4194 /*
4195 * Read and parse the first part of Vital Product Data
4196 */
4197 #define VPD_SIZE 128
4198 #define VPD_MAGIC 0x82
4199
4200 static void __devinit sky2_vpd_info(struct sky2_hw *hw)
4201 {
4202 int cap = pci_find_capability(hw->pdev, PCI_CAP_ID_VPD);
4203 const u8 *p;
4204 u8 *vpd_buf = NULL;
4205 u16 len;
4206 static struct vpd_tag {
4207 char tag[2];
4208 char *label;
4209 } vpd_tags[] = {
4210 { "PN", "Part Number" },
4211 { "EC", "Engineering Level" },
4212 { "MN", "Manufacturer" },
4213 };
4214
4215 if (!cap)
4216 goto out;
4217
4218 vpd_buf = kmalloc(VPD_SIZE, GFP_KERNEL);
4219 if (!vpd_buf)
4220 goto out;
4221
4222 if (sky2_vpd_read(hw, cap, vpd_buf, 0, VPD_SIZE))
4223 goto out;
4224
4225 if (vpd_buf[0] != VPD_MAGIC)
4226 goto out;
4227 len = vpd_buf[1];
4228 if (len == 0 || len > VPD_SIZE - 4)
4229 goto out;
4230 p = vpd_buf + 3;
4231 dev_info(&hw->pdev->dev, "%.*s\n", len, p);
4232 p += len;
4233
4234 while (p < vpd_buf + VPD_SIZE - 4) {
4235 int i;
4236
4237 if (!memcmp("RW", p, 2)) /* end marker */
4238 break;
4239
4240 len = p[2];
4241 if (len > (p - vpd_buf) - 4)
4242 break;
4243
4244 for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
4245 if (!memcmp(vpd_tags[i].tag, p, 2)) {
4246 printk(KERN_DEBUG " %s: %.*s\n",
4247 vpd_tags[i].label, len, p + 3);
4248 break;
4249 }
4250 }
4251 p += len + 3;
4252 }
4253 out:
4254 kfree(vpd_buf);
4255 }
4256
4257 /* This driver supports yukon2 chipset only */
4258 static const char *sky2_name(u8 chipid, char *buf, int sz)
4259 {
4260 const char *name[] = {
4261 "XL", /* 0xb3 */
4262 "EC Ultra", /* 0xb4 */
4263 "Extreme", /* 0xb5 */
4264 "EC", /* 0xb6 */
4265 "FE", /* 0xb7 */
4266 "FE+", /* 0xb8 */
4267 "Supreme", /* 0xb9 */
4268 "UL 2", /* 0xba */
4269 };
4270
4271 if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
4272 strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
4273 else
4274 snprintf(buf, sz, "(chip %#x)", chipid);
4275 return buf;
4276 }
4277
4278 static int __devinit sky2_probe(struct pci_dev *pdev,
4279 const struct pci_device_id *ent)
4280 {
4281 struct net_device *dev;
4282 struct sky2_hw *hw;
4283 int err, using_dac = 0, wol_default;
4284 char buf1[16];
4285
4286 err = pci_enable_device(pdev);
4287 if (err) {
4288 dev_err(&pdev->dev, "cannot enable PCI device\n");
4289 goto err_out;
4290 }
4291
4292 err = pci_request_regions(pdev, DRV_NAME);
4293 if (err) {
4294 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
4295 goto err_out_disable;
4296 }
4297
4298 pci_set_master(pdev);
4299
4300 if (sizeof(dma_addr_t) > sizeof(u32) &&
4301 !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
4302 using_dac = 1;
4303 err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
4304 if (err < 0) {
4305 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
4306 "for consistent allocations\n");
4307 goto err_out_free_regions;
4308 }
4309 } else {
4310 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
4311 if (err) {
4312 dev_err(&pdev->dev, "no usable DMA configuration\n");
4313 goto err_out_free_regions;
4314 }
4315 }
4316
4317 wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
4318
4319 err = -ENOMEM;
4320 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
4321 if (!hw) {
4322 dev_err(&pdev->dev, "cannot allocate hardware struct\n");
4323 goto err_out_free_regions;
4324 }
4325
4326 hw->pdev = pdev;
4327
4328 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
4329 if (!hw->regs) {
4330 dev_err(&pdev->dev, "cannot map device registers\n");
4331 goto err_out_free_hw;
4332 }
4333
4334 #ifdef __BIG_ENDIAN
4335 /* The sk98lin vendor driver uses hardware byte swapping but
4336 * this driver uses software swapping.
4337 */
4338 {
4339 u32 reg;
4340 reg = sky2_pci_read32(hw, PCI_DEV_REG2);
4341 reg &= ~PCI_REV_DESC;
4342 sky2_pci_write32(hw, PCI_DEV_REG2, reg);
4343 }
4344 #endif
4345
4346 /* ring for status responses */
4347 hw->st_le = pci_alloc_consistent(pdev, STATUS_LE_BYTES, &hw->st_dma);
4348 if (!hw->st_le)
4349 goto err_out_iounmap;
4350
4351 err = sky2_init(hw);
4352 if (err)
4353 goto err_out_iounmap;
4354
4355 dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
4356 sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
4357
4358 sky2_reset(hw);
4359
4360 sky2_vpd_info(hw);
4361
4362 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
4363 if (!dev) {
4364 err = -ENOMEM;
4365 goto err_out_free_pci;
4366 }
4367
4368 if (!disable_msi && pci_enable_msi(pdev) == 0) {
4369 err = sky2_test_msi(hw);
4370 if (err == -EOPNOTSUPP)
4371 pci_disable_msi(pdev);
4372 else if (err)
4373 goto err_out_free_netdev;
4374 }
4375
4376 err = register_netdev(dev);
4377 if (err) {
4378 dev_err(&pdev->dev, "cannot register net device\n");
4379 goto err_out_free_netdev;
4380 }
4381
4382 netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
4383
4384 err = request_irq(pdev->irq, sky2_intr,
4385 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
4386 dev->name, hw);
4387 if (err) {
4388 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4389 goto err_out_unregister;
4390 }
4391 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
4392 napi_enable(&hw->napi);
4393
4394 sky2_show_addr(dev);
4395
4396 if (hw->ports > 1) {
4397 struct net_device *dev1;
4398
4399 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
4400 if (!dev1)
4401 dev_warn(&pdev->dev, "allocation for second device failed\n");
4402 else if ((err = register_netdev(dev1))) {
4403 dev_warn(&pdev->dev,
4404 "register of second port failed (%d)\n", err);
4405 hw->dev[1] = NULL;
4406 free_netdev(dev1);
4407 } else
4408 sky2_show_addr(dev1);
4409 }
4410
4411 setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
4412 INIT_WORK(&hw->restart_work, sky2_restart);
4413
4414 pci_set_drvdata(pdev, hw);
4415
4416 return 0;
4417
4418 err_out_unregister:
4419 if (hw->flags & SKY2_HW_USE_MSI)
4420 pci_disable_msi(pdev);
4421 unregister_netdev(dev);
4422 err_out_free_netdev:
4423 free_netdev(dev);
4424 err_out_free_pci:
4425 sky2_write8(hw, B0_CTST, CS_RST_SET);
4426 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
4427 err_out_iounmap:
4428 iounmap(hw->regs);
4429 err_out_free_hw:
4430 kfree(hw);
4431 err_out_free_regions:
4432 pci_release_regions(pdev);
4433 err_out_disable:
4434 pci_disable_device(pdev);
4435 err_out:
4436 pci_set_drvdata(pdev, NULL);
4437 return err;
4438 }
4439
4440 static void __devexit sky2_remove(struct pci_dev *pdev)
4441 {
4442 struct sky2_hw *hw = pci_get_drvdata(pdev);
4443 int i;
4444
4445 if (!hw)
4446 return;
4447
4448 del_timer_sync(&hw->watchdog_timer);
4449 cancel_work_sync(&hw->restart_work);
4450
4451 for (i = hw->ports-1; i >= 0; --i)
4452 unregister_netdev(hw->dev[i]);
4453
4454 sky2_write32(hw, B0_IMSK, 0);
4455
4456 sky2_power_aux(hw);
4457
4458 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
4459 sky2_write8(hw, B0_CTST, CS_RST_SET);
4460 sky2_read8(hw, B0_CTST);
4461
4462 free_irq(pdev->irq, hw);
4463 if (hw->flags & SKY2_HW_USE_MSI)
4464 pci_disable_msi(pdev);
4465 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
4466 pci_release_regions(pdev);
4467 pci_disable_device(pdev);
4468
4469 for (i = hw->ports-1; i >= 0; --i)
4470 free_netdev(hw->dev[i]);
4471
4472 iounmap(hw->regs);
4473 kfree(hw);
4474
4475 pci_set_drvdata(pdev, NULL);
4476 }
4477
4478 #ifdef CONFIG_PM
4479 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
4480 {
4481 struct sky2_hw *hw = pci_get_drvdata(pdev);
4482 int i, wol = 0;
4483
4484 if (!hw)
4485 return 0;
4486
4487 del_timer_sync(&hw->watchdog_timer);
4488 cancel_work_sync(&hw->restart_work);
4489
4490 for (i = 0; i < hw->ports; i++) {
4491 struct net_device *dev = hw->dev[i];
4492 struct sky2_port *sky2 = netdev_priv(dev);
4493
4494 netif_device_detach(dev);
4495 if (netif_running(dev))
4496 sky2_down(dev);
4497
4498 if (sky2->wol)
4499 sky2_wol_init(sky2);
4500
4501 wol |= sky2->wol;
4502 }
4503
4504 sky2_write32(hw, B0_IMSK, 0);
4505 napi_disable(&hw->napi);
4506 sky2_power_aux(hw);
4507
4508 pci_save_state(pdev);
4509 pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
4510 pci_set_power_state(pdev, pci_choose_state(pdev, state));
4511
4512 return 0;
4513 }
4514
4515 static int sky2_resume(struct pci_dev *pdev)
4516 {
4517 struct sky2_hw *hw = pci_get_drvdata(pdev);
4518 int i, err;
4519
4520 if (!hw)
4521 return 0;
4522
4523 err = pci_set_power_state(pdev, PCI_D0);
4524 if (err)
4525 goto out;
4526
4527 err = pci_restore_state(pdev);
4528 if (err)
4529 goto out;
4530
4531 pci_enable_wake(pdev, PCI_D0, 0);
4532
4533 /* Re-enable all clocks */
4534 if (hw->chip_id == CHIP_ID_YUKON_EX ||
4535 hw->chip_id == CHIP_ID_YUKON_EC_U ||
4536 hw->chip_id == CHIP_ID_YUKON_FE_P)
4537 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
4538
4539 sky2_reset(hw);
4540 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
4541 napi_enable(&hw->napi);
4542
4543 for (i = 0; i < hw->ports; i++) {
4544 struct net_device *dev = hw->dev[i];
4545
4546 netif_device_attach(dev);
4547 if (netif_running(dev)) {
4548 err = sky2_up(dev);
4549 if (err) {
4550 printk(KERN_ERR PFX "%s: could not up: %d\n",
4551 dev->name, err);
4552 rtnl_lock();
4553 dev_close(dev);
4554 rtnl_unlock();
4555 goto out;
4556 }
4557 }
4558 }
4559
4560 return 0;
4561 out:
4562 dev_err(&pdev->dev, "resume failed (%d)\n", err);
4563 pci_disable_device(pdev);
4564 return err;
4565 }
4566 #endif
4567
4568 static void sky2_shutdown(struct pci_dev *pdev)
4569 {
4570 struct sky2_hw *hw = pci_get_drvdata(pdev);
4571 int i, wol = 0;
4572
4573 if (!hw)
4574 return;
4575
4576 del_timer_sync(&hw->watchdog_timer);
4577
4578 for (i = 0; i < hw->ports; i++) {
4579 struct net_device *dev = hw->dev[i];
4580 struct sky2_port *sky2 = netdev_priv(dev);
4581
4582 if (sky2->wol) {
4583 wol = 1;
4584 sky2_wol_init(sky2);
4585 }
4586 }
4587
4588 if (wol)
4589 sky2_power_aux(hw);
4590
4591 pci_enable_wake(pdev, PCI_D3hot, wol);
4592 pci_enable_wake(pdev, PCI_D3cold, wol);
4593
4594 pci_disable_device(pdev);
4595 pci_set_power_state(pdev, PCI_D3hot);
4596 }
4597
4598 static struct pci_driver sky2_driver = {
4599 .name = DRV_NAME,
4600 .id_table = sky2_id_table,
4601 .probe = sky2_probe,
4602 .remove = __devexit_p(sky2_remove),
4603 #ifdef CONFIG_PM
4604 .suspend = sky2_suspend,
4605 .resume = sky2_resume,
4606 #endif
4607 .shutdown = sky2_shutdown,
4608 };
4609
4610 static int __init sky2_init_module(void)
4611 {
4612 pr_info(PFX "driver version " DRV_VERSION "\n");
4613
4614 sky2_debug_init();
4615 return pci_register_driver(&sky2_driver);
4616 }
4617
4618 static void __exit sky2_cleanup_module(void)
4619 {
4620 pci_unregister_driver(&sky2_driver);
4621 sky2_debug_cleanup();
4622 }
4623
4624 module_init(sky2_init_module);
4625 module_exit(sky2_cleanup_module);
4626
4627 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
4628 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
4629 MODULE_LICENSE("GPL");
4630 MODULE_VERSION(DRV_VERSION);
Stable & featurefull patchset based on Linus's git branch