2 * libata-core.c - helper library for ATA
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
30 * Hardware documentation available from http://www.t13.org/ and
31 * http://www.sata-io.org/
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/pci.h>
38 #include <linux/init.h>
39 #include <linux/list.h>
41 #include <linux/highmem.h>
42 #include <linux/spinlock.h>
43 #include <linux/blkdev.h>
44 #include <linux/delay.h>
45 #include <linux/timer.h>
46 #include <linux/interrupt.h>
47 #include <linux/completion.h>
48 #include <linux/suspend.h>
49 #include <linux/workqueue.h>
50 #include <linux/jiffies.h>
51 #include <linux/scatterlist.h>
52 #include <scsi/scsi.h>
53 #include <scsi/scsi_cmnd.h>
54 #include <scsi/scsi_host.h>
55 #include <linux/libata.h>
57 #include <asm/semaphore.h>
58 #include <asm/byteorder.h>
63 /* debounce timing parameters in msecs { interval, duration, timeout } */
64 const unsigned long sata_deb_timing_normal
[] = { 5, 100, 2000 };
65 const unsigned long sata_deb_timing_hotplug
[] = { 25, 500, 2000 };
66 const unsigned long sata_deb_timing_long
[] = { 100, 2000, 5000 };
68 static unsigned int ata_dev_init_params(struct ata_device
*dev
,
69 u16 heads
, u16 sectors
);
70 static unsigned int ata_dev_set_xfermode(struct ata_device
*dev
);
71 static unsigned int ata_dev_set_AN(struct ata_device
*dev
, u8 enable
);
72 static void ata_dev_xfermask(struct ata_device
*dev
);
73 static unsigned long ata_dev_blacklisted(const struct ata_device
*dev
);
75 unsigned int ata_print_id
= 1;
76 static struct workqueue_struct
*ata_wq
;
78 struct workqueue_struct
*ata_aux_wq
;
80 int atapi_enabled
= 1;
81 module_param(atapi_enabled
, int, 0444);
82 MODULE_PARM_DESC(atapi_enabled
, "Enable discovery of ATAPI devices (0=off, 1=on)");
85 module_param(atapi_dmadir
, int, 0444);
86 MODULE_PARM_DESC(atapi_dmadir
, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
88 int atapi_passthru16
= 1;
89 module_param(atapi_passthru16
, int, 0444);
90 MODULE_PARM_DESC(atapi_passthru16
, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
93 module_param_named(fua
, libata_fua
, int, 0444);
94 MODULE_PARM_DESC(fua
, "FUA support (0=off, 1=on)");
96 static int ata_ignore_hpa
= 0;
97 module_param_named(ignore_hpa
, ata_ignore_hpa
, int, 0644);
98 MODULE_PARM_DESC(ignore_hpa
, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
100 static int ata_probe_timeout
= ATA_TMOUT_INTERNAL
/ HZ
;
101 module_param(ata_probe_timeout
, int, 0444);
102 MODULE_PARM_DESC(ata_probe_timeout
, "Set ATA probing timeout (seconds)");
104 int libata_noacpi
= 1;
105 module_param_named(noacpi
, libata_noacpi
, int, 0444);
106 MODULE_PARM_DESC(noacpi
, "Disables the use of ACPI in suspend/resume when set");
108 MODULE_AUTHOR("Jeff Garzik");
109 MODULE_DESCRIPTION("Library module for ATA devices");
110 MODULE_LICENSE("GPL");
111 MODULE_VERSION(DRV_VERSION
);
115 * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
116 * @tf: Taskfile to convert
117 * @pmp: Port multiplier port
118 * @is_cmd: This FIS is for command
119 * @fis: Buffer into which data will output
121 * Converts a standard ATA taskfile to a Serial ATA
122 * FIS structure (Register - Host to Device).
125 * Inherited from caller.
127 void ata_tf_to_fis(const struct ata_taskfile
*tf
, u8 pmp
, int is_cmd
, u8
*fis
)
129 fis
[0] = 0x27; /* Register - Host to Device FIS */
130 fis
[1] = pmp
& 0xf; /* Port multiplier number*/
132 fis
[1] |= (1 << 7); /* bit 7 indicates Command FIS */
134 fis
[2] = tf
->command
;
135 fis
[3] = tf
->feature
;
142 fis
[8] = tf
->hob_lbal
;
143 fis
[9] = tf
->hob_lbam
;
144 fis
[10] = tf
->hob_lbah
;
145 fis
[11] = tf
->hob_feature
;
148 fis
[13] = tf
->hob_nsect
;
159 * ata_tf_from_fis - Convert SATA FIS to ATA taskfile
160 * @fis: Buffer from which data will be input
161 * @tf: Taskfile to output
163 * Converts a serial ATA FIS structure to a standard ATA taskfile.
166 * Inherited from caller.
169 void ata_tf_from_fis(const u8
*fis
, struct ata_taskfile
*tf
)
171 tf
->command
= fis
[2]; /* status */
172 tf
->feature
= fis
[3]; /* error */
179 tf
->hob_lbal
= fis
[8];
180 tf
->hob_lbam
= fis
[9];
181 tf
->hob_lbah
= fis
[10];
184 tf
->hob_nsect
= fis
[13];
187 static const u8 ata_rw_cmds
[] = {
191 ATA_CMD_READ_MULTI_EXT
,
192 ATA_CMD_WRITE_MULTI_EXT
,
196 ATA_CMD_WRITE_MULTI_FUA_EXT
,
200 ATA_CMD_PIO_READ_EXT
,
201 ATA_CMD_PIO_WRITE_EXT
,
214 ATA_CMD_WRITE_FUA_EXT
218 * ata_rwcmd_protocol - set taskfile r/w commands and protocol
219 * @tf: command to examine and configure
220 * @dev: device tf belongs to
222 * Examine the device configuration and tf->flags to calculate
223 * the proper read/write commands and protocol to use.
228 static int ata_rwcmd_protocol(struct ata_taskfile
*tf
, struct ata_device
*dev
)
232 int index
, fua
, lba48
, write
;
234 fua
= (tf
->flags
& ATA_TFLAG_FUA
) ? 4 : 0;
235 lba48
= (tf
->flags
& ATA_TFLAG_LBA48
) ? 2 : 0;
236 write
= (tf
->flags
& ATA_TFLAG_WRITE
) ? 1 : 0;
238 if (dev
->flags
& ATA_DFLAG_PIO
) {
239 tf
->protocol
= ATA_PROT_PIO
;
240 index
= dev
->multi_count
? 0 : 8;
241 } else if (lba48
&& (dev
->link
->ap
->flags
& ATA_FLAG_PIO_LBA48
)) {
242 /* Unable to use DMA due to host limitation */
243 tf
->protocol
= ATA_PROT_PIO
;
244 index
= dev
->multi_count
? 0 : 8;
246 tf
->protocol
= ATA_PROT_DMA
;
250 cmd
= ata_rw_cmds
[index
+ fua
+ lba48
+ write
];
259 * ata_tf_read_block - Read block address from ATA taskfile
260 * @tf: ATA taskfile of interest
261 * @dev: ATA device @tf belongs to
266 * Read block address from @tf. This function can handle all
267 * three address formats - LBA, LBA48 and CHS. tf->protocol and
268 * flags select the address format to use.
271 * Block address read from @tf.
273 u64
ata_tf_read_block(struct ata_taskfile
*tf
, struct ata_device
*dev
)
277 if (tf
->flags
& ATA_TFLAG_LBA
) {
278 if (tf
->flags
& ATA_TFLAG_LBA48
) {
279 block
|= (u64
)tf
->hob_lbah
<< 40;
280 block
|= (u64
)tf
->hob_lbam
<< 32;
281 block
|= tf
->hob_lbal
<< 24;
283 block
|= (tf
->device
& 0xf) << 24;
285 block
|= tf
->lbah
<< 16;
286 block
|= tf
->lbam
<< 8;
291 cyl
= tf
->lbam
| (tf
->lbah
<< 8);
292 head
= tf
->device
& 0xf;
295 block
= (cyl
* dev
->heads
+ head
) * dev
->sectors
+ sect
;
302 * ata_build_rw_tf - Build ATA taskfile for given read/write request
303 * @tf: Target ATA taskfile
304 * @dev: ATA device @tf belongs to
305 * @block: Block address
306 * @n_block: Number of blocks
307 * @tf_flags: RW/FUA etc...
313 * Build ATA taskfile @tf for read/write request described by
314 * @block, @n_block, @tf_flags and @tag on @dev.
318 * 0 on success, -ERANGE if the request is too large for @dev,
319 * -EINVAL if the request is invalid.
321 int ata_build_rw_tf(struct ata_taskfile
*tf
, struct ata_device
*dev
,
322 u64 block
, u32 n_block
, unsigned int tf_flags
,
325 tf
->flags
|= ATA_TFLAG_ISADDR
| ATA_TFLAG_DEVICE
;
326 tf
->flags
|= tf_flags
;
328 if (ata_ncq_enabled(dev
) && likely(tag
!= ATA_TAG_INTERNAL
)) {
330 if (!lba_48_ok(block
, n_block
))
333 tf
->protocol
= ATA_PROT_NCQ
;
334 tf
->flags
|= ATA_TFLAG_LBA
| ATA_TFLAG_LBA48
;
336 if (tf
->flags
& ATA_TFLAG_WRITE
)
337 tf
->command
= ATA_CMD_FPDMA_WRITE
;
339 tf
->command
= ATA_CMD_FPDMA_READ
;
341 tf
->nsect
= tag
<< 3;
342 tf
->hob_feature
= (n_block
>> 8) & 0xff;
343 tf
->feature
= n_block
& 0xff;
345 tf
->hob_lbah
= (block
>> 40) & 0xff;
346 tf
->hob_lbam
= (block
>> 32) & 0xff;
347 tf
->hob_lbal
= (block
>> 24) & 0xff;
348 tf
->lbah
= (block
>> 16) & 0xff;
349 tf
->lbam
= (block
>> 8) & 0xff;
350 tf
->lbal
= block
& 0xff;
353 if (tf
->flags
& ATA_TFLAG_FUA
)
354 tf
->device
|= 1 << 7;
355 } else if (dev
->flags
& ATA_DFLAG_LBA
) {
356 tf
->flags
|= ATA_TFLAG_LBA
;
358 if (lba_28_ok(block
, n_block
)) {
360 tf
->device
|= (block
>> 24) & 0xf;
361 } else if (lba_48_ok(block
, n_block
)) {
362 if (!(dev
->flags
& ATA_DFLAG_LBA48
))
366 tf
->flags
|= ATA_TFLAG_LBA48
;
368 tf
->hob_nsect
= (n_block
>> 8) & 0xff;
370 tf
->hob_lbah
= (block
>> 40) & 0xff;
371 tf
->hob_lbam
= (block
>> 32) & 0xff;
372 tf
->hob_lbal
= (block
>> 24) & 0xff;
374 /* request too large even for LBA48 */
377 if (unlikely(ata_rwcmd_protocol(tf
, dev
) < 0))
380 tf
->nsect
= n_block
& 0xff;
382 tf
->lbah
= (block
>> 16) & 0xff;
383 tf
->lbam
= (block
>> 8) & 0xff;
384 tf
->lbal
= block
& 0xff;
386 tf
->device
|= ATA_LBA
;
389 u32 sect
, head
, cyl
, track
;
391 /* The request -may- be too large for CHS addressing. */
392 if (!lba_28_ok(block
, n_block
))
395 if (unlikely(ata_rwcmd_protocol(tf
, dev
) < 0))
398 /* Convert LBA to CHS */
399 track
= (u32
)block
/ dev
->sectors
;
400 cyl
= track
/ dev
->heads
;
401 head
= track
% dev
->heads
;
402 sect
= (u32
)block
% dev
->sectors
+ 1;
404 DPRINTK("block %u track %u cyl %u head %u sect %u\n",
405 (u32
)block
, track
, cyl
, head
, sect
);
407 /* Check whether the converted CHS can fit.
411 if ((cyl
>> 16) || (head
>> 4) || (sect
>> 8) || (!sect
))
414 tf
->nsect
= n_block
& 0xff; /* Sector count 0 means 256 sectors */
425 * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
426 * @pio_mask: pio_mask
427 * @mwdma_mask: mwdma_mask
428 * @udma_mask: udma_mask
430 * Pack @pio_mask, @mwdma_mask and @udma_mask into a single
431 * unsigned int xfer_mask.
439 static unsigned int ata_pack_xfermask(unsigned int pio_mask
,
440 unsigned int mwdma_mask
,
441 unsigned int udma_mask
)
443 return ((pio_mask
<< ATA_SHIFT_PIO
) & ATA_MASK_PIO
) |
444 ((mwdma_mask
<< ATA_SHIFT_MWDMA
) & ATA_MASK_MWDMA
) |
445 ((udma_mask
<< ATA_SHIFT_UDMA
) & ATA_MASK_UDMA
);
449 * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
450 * @xfer_mask: xfer_mask to unpack
451 * @pio_mask: resulting pio_mask
452 * @mwdma_mask: resulting mwdma_mask
453 * @udma_mask: resulting udma_mask
455 * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
456 * Any NULL distination masks will be ignored.
458 static void ata_unpack_xfermask(unsigned int xfer_mask
,
459 unsigned int *pio_mask
,
460 unsigned int *mwdma_mask
,
461 unsigned int *udma_mask
)
464 *pio_mask
= (xfer_mask
& ATA_MASK_PIO
) >> ATA_SHIFT_PIO
;
466 *mwdma_mask
= (xfer_mask
& ATA_MASK_MWDMA
) >> ATA_SHIFT_MWDMA
;
468 *udma_mask
= (xfer_mask
& ATA_MASK_UDMA
) >> ATA_SHIFT_UDMA
;
471 static const struct ata_xfer_ent
{
475 { ATA_SHIFT_PIO
, ATA_BITS_PIO
, XFER_PIO_0
},
476 { ATA_SHIFT_MWDMA
, ATA_BITS_MWDMA
, XFER_MW_DMA_0
},
477 { ATA_SHIFT_UDMA
, ATA_BITS_UDMA
, XFER_UDMA_0
},
482 * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
483 * @xfer_mask: xfer_mask of interest
485 * Return matching XFER_* value for @xfer_mask. Only the highest
486 * bit of @xfer_mask is considered.
492 * Matching XFER_* value, 0 if no match found.
494 static u8
ata_xfer_mask2mode(unsigned int xfer_mask
)
496 int highbit
= fls(xfer_mask
) - 1;
497 const struct ata_xfer_ent
*ent
;
499 for (ent
= ata_xfer_tbl
; ent
->shift
>= 0; ent
++)
500 if (highbit
>= ent
->shift
&& highbit
< ent
->shift
+ ent
->bits
)
501 return ent
->base
+ highbit
- ent
->shift
;
506 * ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
507 * @xfer_mode: XFER_* of interest
509 * Return matching xfer_mask for @xfer_mode.
515 * Matching xfer_mask, 0 if no match found.
517 static unsigned int ata_xfer_mode2mask(u8 xfer_mode
)
519 const struct ata_xfer_ent
*ent
;
521 for (ent
= ata_xfer_tbl
; ent
->shift
>= 0; ent
++)
522 if (xfer_mode
>= ent
->base
&& xfer_mode
< ent
->base
+ ent
->bits
)
523 return 1 << (ent
->shift
+ xfer_mode
- ent
->base
);
528 * ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
529 * @xfer_mode: XFER_* of interest
531 * Return matching xfer_shift for @xfer_mode.
537 * Matching xfer_shift, -1 if no match found.
539 static int ata_xfer_mode2shift(unsigned int xfer_mode
)
541 const struct ata_xfer_ent
*ent
;
543 for (ent
= ata_xfer_tbl
; ent
->shift
>= 0; ent
++)
544 if (xfer_mode
>= ent
->base
&& xfer_mode
< ent
->base
+ ent
->bits
)
550 * ata_mode_string - convert xfer_mask to string
551 * @xfer_mask: mask of bits supported; only highest bit counts.
553 * Determine string which represents the highest speed
554 * (highest bit in @modemask).
560 * Constant C string representing highest speed listed in
561 * @mode_mask, or the constant C string "<n/a>".
563 static const char *ata_mode_string(unsigned int xfer_mask
)
565 static const char * const xfer_mode_str
[] = {
589 highbit
= fls(xfer_mask
) - 1;
590 if (highbit
>= 0 && highbit
< ARRAY_SIZE(xfer_mode_str
))
591 return xfer_mode_str
[highbit
];
595 static const char *sata_spd_string(unsigned int spd
)
597 static const char * const spd_str
[] = {
602 if (spd
== 0 || (spd
- 1) >= ARRAY_SIZE(spd_str
))
604 return spd_str
[spd
- 1];
607 void ata_dev_disable(struct ata_device
*dev
)
609 if (ata_dev_enabled(dev
)) {
610 if (ata_msg_drv(dev
->link
->ap
))
611 ata_dev_printk(dev
, KERN_WARNING
, "disabled\n");
612 ata_down_xfermask_limit(dev
, ATA_DNXFER_FORCE_PIO0
|
619 * ata_devchk - PATA device presence detection
620 * @ap: ATA channel to examine
621 * @device: Device to examine (starting at zero)
623 * This technique was originally described in
624 * Hale Landis's ATADRVR (www.ata-atapi.com), and
625 * later found its way into the ATA/ATAPI spec.
627 * Write a pattern to the ATA shadow registers,
628 * and if a device is present, it will respond by
629 * correctly storing and echoing back the
630 * ATA shadow register contents.
636 static unsigned int ata_devchk(struct ata_port
*ap
, unsigned int device
)
638 struct ata_ioports
*ioaddr
= &ap
->ioaddr
;
641 ap
->ops
->dev_select(ap
, device
);
643 iowrite8(0x55, ioaddr
->nsect_addr
);
644 iowrite8(0xaa, ioaddr
->lbal_addr
);
646 iowrite8(0xaa, ioaddr
->nsect_addr
);
647 iowrite8(0x55, ioaddr
->lbal_addr
);
649 iowrite8(0x55, ioaddr
->nsect_addr
);
650 iowrite8(0xaa, ioaddr
->lbal_addr
);
652 nsect
= ioread8(ioaddr
->nsect_addr
);
653 lbal
= ioread8(ioaddr
->lbal_addr
);
655 if ((nsect
== 0x55) && (lbal
== 0xaa))
656 return 1; /* we found a device */
658 return 0; /* nothing found */
662 * ata_dev_classify - determine device type based on ATA-spec signature
663 * @tf: ATA taskfile register set for device to be identified
665 * Determine from taskfile register contents whether a device is
666 * ATA or ATAPI, as per "Signature and persistence" section
667 * of ATA/PI spec (volume 1, sect 5.14).
673 * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN
674 * the event of failure.
677 unsigned int ata_dev_classify(const struct ata_taskfile
*tf
)
679 /* Apple's open source Darwin code hints that some devices only
680 * put a proper signature into the LBA mid/high registers,
681 * So, we only check those. It's sufficient for uniqueness.
684 if (((tf
->lbam
== 0) && (tf
->lbah
== 0)) ||
685 ((tf
->lbam
== 0x3c) && (tf
->lbah
== 0xc3))) {
686 DPRINTK("found ATA device by sig\n");
690 if (((tf
->lbam
== 0x14) && (tf
->lbah
== 0xeb)) ||
691 ((tf
->lbam
== 0x69) && (tf
->lbah
== 0x96))) {
692 DPRINTK("found ATAPI device by sig\n");
693 return ATA_DEV_ATAPI
;
696 DPRINTK("unknown device\n");
697 return ATA_DEV_UNKNOWN
;
701 * ata_dev_try_classify - Parse returned ATA device signature
702 * @dev: ATA device to classify (starting at zero)
703 * @present: device seems present
704 * @r_err: Value of error register on completion
706 * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
707 * an ATA/ATAPI-defined set of values is placed in the ATA
708 * shadow registers, indicating the results of device detection
711 * Select the ATA device, and read the values from the ATA shadow
712 * registers. Then parse according to the Error register value,
713 * and the spec-defined values examined by ata_dev_classify().
719 * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
721 unsigned int ata_dev_try_classify(struct ata_device
*dev
, int present
,
724 struct ata_port
*ap
= dev
->link
->ap
;
725 struct ata_taskfile tf
;
729 ap
->ops
->dev_select(ap
, dev
->devno
);
731 memset(&tf
, 0, sizeof(tf
));
733 ap
->ops
->tf_read(ap
, &tf
);
738 /* see if device passed diags: if master then continue and warn later */
739 if (err
== 0 && dev
->devno
== 0)
740 /* diagnostic fail : do nothing _YET_ */
741 dev
->horkage
|= ATA_HORKAGE_DIAGNOSTIC
;
744 else if ((dev
->devno
== 0) && (err
== 0x81))
749 /* determine if device is ATA or ATAPI */
750 class = ata_dev_classify(&tf
);
752 if (class == ATA_DEV_UNKNOWN
) {
753 /* If the device failed diagnostic, it's likely to
754 * have reported incorrect device signature too.
755 * Assume ATA device if the device seems present but
756 * device signature is invalid with diagnostic
759 if (present
&& (dev
->horkage
& ATA_HORKAGE_DIAGNOSTIC
))
762 class = ATA_DEV_NONE
;
763 } else if ((class == ATA_DEV_ATA
) && (ata_chk_status(ap
) == 0))
764 class = ATA_DEV_NONE
;
770 * ata_id_string - Convert IDENTIFY DEVICE page into string
771 * @id: IDENTIFY DEVICE results we will examine
772 * @s: string into which data is output
773 * @ofs: offset into identify device page
774 * @len: length of string to return. must be an even number.
776 * The strings in the IDENTIFY DEVICE page are broken up into
777 * 16-bit chunks. Run through the string, and output each
778 * 8-bit chunk linearly, regardless of platform.
784 void ata_id_string(const u16
*id
, unsigned char *s
,
785 unsigned int ofs
, unsigned int len
)
804 * ata_id_c_string - Convert IDENTIFY DEVICE page into C string
805 * @id: IDENTIFY DEVICE results we will examine
806 * @s: string into which data is output
807 * @ofs: offset into identify device page
808 * @len: length of string to return. must be an odd number.
810 * This function is identical to ata_id_string except that it
811 * trims trailing spaces and terminates the resulting string with
812 * null. @len must be actual maximum length (even number) + 1.
817 void ata_id_c_string(const u16
*id
, unsigned char *s
,
818 unsigned int ofs
, unsigned int len
)
824 ata_id_string(id
, s
, ofs
, len
- 1);
826 p
= s
+ strnlen(s
, len
- 1);
827 while (p
> s
&& p
[-1] == ' ')
832 static u64
ata_id_n_sectors(const u16
*id
)
834 if (ata_id_has_lba(id
)) {
835 if (ata_id_has_lba48(id
))
836 return ata_id_u64(id
, 100);
838 return ata_id_u32(id
, 60);
840 if (ata_id_current_chs_valid(id
))
841 return ata_id_u32(id
, 57);
843 return id
[1] * id
[3] * id
[6];
847 static u64
ata_tf_to_lba48(struct ata_taskfile
*tf
)
851 sectors
|= ((u64
)(tf
->hob_lbah
& 0xff)) << 40;
852 sectors
|= ((u64
)(tf
->hob_lbam
& 0xff)) << 32;
853 sectors
|= (tf
->hob_lbal
& 0xff) << 24;
854 sectors
|= (tf
->lbah
& 0xff) << 16;
855 sectors
|= (tf
->lbam
& 0xff) << 8;
856 sectors
|= (tf
->lbal
& 0xff);
861 static u64
ata_tf_to_lba(struct ata_taskfile
*tf
)
865 sectors
|= (tf
->device
& 0x0f) << 24;
866 sectors
|= (tf
->lbah
& 0xff) << 16;
867 sectors
|= (tf
->lbam
& 0xff) << 8;
868 sectors
|= (tf
->lbal
& 0xff);
874 * ata_read_native_max_address - Read native max address
875 * @dev: target device
876 * @max_sectors: out parameter for the result native max address
878 * Perform an LBA48 or LBA28 native size query upon the device in
882 * 0 on success, -EACCES if command is aborted by the drive.
883 * -EIO on other errors.
885 static int ata_read_native_max_address(struct ata_device
*dev
, u64
*max_sectors
)
887 unsigned int err_mask
;
888 struct ata_taskfile tf
;
889 int lba48
= ata_id_has_lba48(dev
->id
);
891 ata_tf_init(dev
, &tf
);
893 /* always clear all address registers */
894 tf
.flags
|= ATA_TFLAG_DEVICE
| ATA_TFLAG_ISADDR
;
897 tf
.command
= ATA_CMD_READ_NATIVE_MAX_EXT
;
898 tf
.flags
|= ATA_TFLAG_LBA48
;
900 tf
.command
= ATA_CMD_READ_NATIVE_MAX
;
902 tf
.protocol
|= ATA_PROT_NODATA
;
903 tf
.device
|= ATA_LBA
;
905 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
907 ata_dev_printk(dev
, KERN_WARNING
, "failed to read native "
908 "max address (err_mask=0x%x)\n", err_mask
);
909 if (err_mask
== AC_ERR_DEV
&& (tf
.feature
& ATA_ABORTED
))
915 *max_sectors
= ata_tf_to_lba48(&tf
);
917 *max_sectors
= ata_tf_to_lba(&tf
);
923 * ata_set_max_sectors - Set max sectors
924 * @dev: target device
925 * @new_sectors: new max sectors value to set for the device
927 * Set max sectors of @dev to @new_sectors.
930 * 0 on success, -EACCES if command is aborted or denied (due to
931 * previous non-volatile SET_MAX) by the drive. -EIO on other
934 static int ata_set_max_sectors(struct ata_device
*dev
, u64 new_sectors
)
936 unsigned int err_mask
;
937 struct ata_taskfile tf
;
938 int lba48
= ata_id_has_lba48(dev
->id
);
942 ata_tf_init(dev
, &tf
);
944 tf
.flags
|= ATA_TFLAG_DEVICE
| ATA_TFLAG_ISADDR
;
947 tf
.command
= ATA_CMD_SET_MAX_EXT
;
948 tf
.flags
|= ATA_TFLAG_LBA48
;
950 tf
.hob_lbal
= (new_sectors
>> 24) & 0xff;
951 tf
.hob_lbam
= (new_sectors
>> 32) & 0xff;
952 tf
.hob_lbah
= (new_sectors
>> 40) & 0xff;
954 tf
.command
= ATA_CMD_SET_MAX
;
956 tf
.protocol
|= ATA_PROT_NODATA
;
957 tf
.device
|= ATA_LBA
;
959 tf
.lbal
= (new_sectors
>> 0) & 0xff;
960 tf
.lbam
= (new_sectors
>> 8) & 0xff;
961 tf
.lbah
= (new_sectors
>> 16) & 0xff;
963 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
965 ata_dev_printk(dev
, KERN_WARNING
, "failed to set "
966 "max address (err_mask=0x%x)\n", err_mask
);
967 if (err_mask
== AC_ERR_DEV
&&
968 (tf
.feature
& (ATA_ABORTED
| ATA_IDNF
)))
977 * ata_hpa_resize - Resize a device with an HPA set
978 * @dev: Device to resize
980 * Read the size of an LBA28 or LBA48 disk with HPA features and resize
981 * it if required to the full size of the media. The caller must check
982 * the drive has the HPA feature set enabled.
985 * 0 on success, -errno on failure.
987 static int ata_hpa_resize(struct ata_device
*dev
)
989 struct ata_eh_context
*ehc
= &dev
->link
->eh_context
;
990 int print_info
= ehc
->i
.flags
& ATA_EHI_PRINTINFO
;
991 u64 sectors
= ata_id_n_sectors(dev
->id
);
995 /* do we need to do it? */
996 if (dev
->class != ATA_DEV_ATA
||
997 !ata_id_has_lba(dev
->id
) || !ata_id_hpa_enabled(dev
->id
) ||
998 (dev
->horkage
& ATA_HORKAGE_BROKEN_HPA
))
1001 /* read native max address */
1002 rc
= ata_read_native_max_address(dev
, &native_sectors
);
1004 /* If HPA isn't going to be unlocked, skip HPA
1005 * resizing from the next try.
1007 if (!ata_ignore_hpa
) {
1008 ata_dev_printk(dev
, KERN_WARNING
, "HPA support seems "
1009 "broken, will skip HPA handling\n");
1010 dev
->horkage
|= ATA_HORKAGE_BROKEN_HPA
;
1012 /* we can continue if device aborted the command */
1020 /* nothing to do? */
1021 if (native_sectors
<= sectors
|| !ata_ignore_hpa
) {
1022 if (!print_info
|| native_sectors
== sectors
)
1025 if (native_sectors
> sectors
)
1026 ata_dev_printk(dev
, KERN_INFO
,
1027 "HPA detected: current %llu, native %llu\n",
1028 (unsigned long long)sectors
,
1029 (unsigned long long)native_sectors
);
1030 else if (native_sectors
< sectors
)
1031 ata_dev_printk(dev
, KERN_WARNING
,
1032 "native sectors (%llu) is smaller than "
1034 (unsigned long long)native_sectors
,
1035 (unsigned long long)sectors
);
1039 /* let's unlock HPA */
1040 rc
= ata_set_max_sectors(dev
, native_sectors
);
1041 if (rc
== -EACCES
) {
1042 /* if device aborted the command, skip HPA resizing */
1043 ata_dev_printk(dev
, KERN_WARNING
, "device aborted resize "
1044 "(%llu -> %llu), skipping HPA handling\n",
1045 (unsigned long long)sectors
,
1046 (unsigned long long)native_sectors
);
1047 dev
->horkage
|= ATA_HORKAGE_BROKEN_HPA
;
1052 /* re-read IDENTIFY data */
1053 rc
= ata_dev_reread_id(dev
, 0);
1055 ata_dev_printk(dev
, KERN_ERR
, "failed to re-read IDENTIFY "
1056 "data after HPA resizing\n");
1061 u64 new_sectors
= ata_id_n_sectors(dev
->id
);
1062 ata_dev_printk(dev
, KERN_INFO
,
1063 "HPA unlocked: %llu -> %llu, native %llu\n",
1064 (unsigned long long)sectors
,
1065 (unsigned long long)new_sectors
,
1066 (unsigned long long)native_sectors
);
1073 * ata_id_to_dma_mode - Identify DMA mode from id block
1074 * @dev: device to identify
1075 * @unknown: mode to assume if we cannot tell
1077 * Set up the timing values for the device based upon the identify
1078 * reported values for the DMA mode. This function is used by drivers
1079 * which rely upon firmware configured modes, but wish to report the
1080 * mode correctly when possible.
1082 * In addition we emit similarly formatted messages to the default
1083 * ata_dev_set_mode handler, in order to provide consistency of
1087 void ata_id_to_dma_mode(struct ata_device
*dev
, u8 unknown
)
1092 /* Pack the DMA modes */
1093 mask
= ((dev
->id
[63] >> 8) << ATA_SHIFT_MWDMA
) & ATA_MASK_MWDMA
;
1094 if (dev
->id
[53] & 0x04)
1095 mask
|= ((dev
->id
[88] >> 8) << ATA_SHIFT_UDMA
) & ATA_MASK_UDMA
;
1097 /* Select the mode in use */
1098 mode
= ata_xfer_mask2mode(mask
);
1101 ata_dev_printk(dev
, KERN_INFO
, "configured for %s\n",
1102 ata_mode_string(mask
));
1104 /* SWDMA perhaps ? */
1106 ata_dev_printk(dev
, KERN_INFO
, "configured for DMA\n");
1109 /* Configure the device reporting */
1110 dev
->xfer_mode
= mode
;
1111 dev
->xfer_shift
= ata_xfer_mode2shift(mode
);
1115 * ata_noop_dev_select - Select device 0/1 on ATA bus
1116 * @ap: ATA channel to manipulate
1117 * @device: ATA device (numbered from zero) to select
1119 * This function performs no actual function.
1121 * May be used as the dev_select() entry in ata_port_operations.
1126 void ata_noop_dev_select (struct ata_port
*ap
, unsigned int device
)
1132 * ata_std_dev_select - Select device 0/1 on ATA bus
1133 * @ap: ATA channel to manipulate
1134 * @device: ATA device (numbered from zero) to select
1136 * Use the method defined in the ATA specification to
1137 * make either device 0, or device 1, active on the
1138 * ATA channel. Works with both PIO and MMIO.
1140 * May be used as the dev_select() entry in ata_port_operations.
1146 void ata_std_dev_select (struct ata_port
*ap
, unsigned int device
)
1151 tmp
= ATA_DEVICE_OBS
;
1153 tmp
= ATA_DEVICE_OBS
| ATA_DEV1
;
1155 iowrite8(tmp
, ap
->ioaddr
.device_addr
);
1156 ata_pause(ap
); /* needed; also flushes, for mmio */
1160 * ata_dev_select - Select device 0/1 on ATA bus
1161 * @ap: ATA channel to manipulate
1162 * @device: ATA device (numbered from zero) to select
1163 * @wait: non-zero to wait for Status register BSY bit to clear
1164 * @can_sleep: non-zero if context allows sleeping
1166 * Use the method defined in the ATA specification to
1167 * make either device 0, or device 1, active on the
1170 * This is a high-level version of ata_std_dev_select(),
1171 * which additionally provides the services of inserting
1172 * the proper pauses and status polling, where needed.
1178 void ata_dev_select(struct ata_port
*ap
, unsigned int device
,
1179 unsigned int wait
, unsigned int can_sleep
)
1181 if (ata_msg_probe(ap
))
1182 ata_port_printk(ap
, KERN_INFO
, "ata_dev_select: ENTER, "
1183 "device %u, wait %u\n", device
, wait
);
1188 ap
->ops
->dev_select(ap
, device
);
1191 if (can_sleep
&& ap
->link
.device
[device
].class == ATA_DEV_ATAPI
)
1198 * ata_dump_id - IDENTIFY DEVICE info debugging output
1199 * @id: IDENTIFY DEVICE page to dump
1201 * Dump selected 16-bit words from the given IDENTIFY DEVICE
1208 static inline void ata_dump_id(const u16
*id
)
1210 DPRINTK("49==0x%04x "
1220 DPRINTK("80==0x%04x "
1230 DPRINTK("88==0x%04x "
1237 * ata_id_xfermask - Compute xfermask from the given IDENTIFY data
1238 * @id: IDENTIFY data to compute xfer mask from
1240 * Compute the xfermask for this device. This is not as trivial
1241 * as it seems if we must consider early devices correctly.
1243 * FIXME: pre IDE drive timing (do we care ?).
1251 static unsigned int ata_id_xfermask(const u16
*id
)
1253 unsigned int pio_mask
, mwdma_mask
, udma_mask
;
1255 /* Usual case. Word 53 indicates word 64 is valid */
1256 if (id
[ATA_ID_FIELD_VALID
] & (1 << 1)) {
1257 pio_mask
= id
[ATA_ID_PIO_MODES
] & 0x03;
1261 /* If word 64 isn't valid then Word 51 high byte holds
1262 * the PIO timing number for the maximum. Turn it into
1265 u8 mode
= (id
[ATA_ID_OLD_PIO_MODES
] >> 8) & 0xFF;
1266 if (mode
< 5) /* Valid PIO range */
1267 pio_mask
= (2 << mode
) - 1;
1271 /* But wait.. there's more. Design your standards by
1272 * committee and you too can get a free iordy field to
1273 * process. However its the speeds not the modes that
1274 * are supported... Note drivers using the timing API
1275 * will get this right anyway
1279 mwdma_mask
= id
[ATA_ID_MWDMA_MODES
] & 0x07;
1281 if (ata_id_is_cfa(id
)) {
1283 * Process compact flash extended modes
1285 int pio
= id
[163] & 0x7;
1286 int dma
= (id
[163] >> 3) & 7;
1289 pio_mask
|= (1 << 5);
1291 pio_mask
|= (1 << 6);
1293 mwdma_mask
|= (1 << 3);
1295 mwdma_mask
|= (1 << 4);
1299 if (id
[ATA_ID_FIELD_VALID
] & (1 << 2))
1300 udma_mask
= id
[ATA_ID_UDMA_MODES
] & 0xff;
1302 return ata_pack_xfermask(pio_mask
, mwdma_mask
, udma_mask
);
1306 * ata_port_queue_task - Queue port_task
1307 * @ap: The ata_port to queue port_task for
1308 * @fn: workqueue function to be scheduled
1309 * @data: data for @fn to use
1310 * @delay: delay time for workqueue function
1312 * Schedule @fn(@data) for execution after @delay jiffies using
1313 * port_task. There is one port_task per port and it's the
1314 * user(low level driver)'s responsibility to make sure that only
1315 * one task is active at any given time.
1317 * libata core layer takes care of synchronization between
1318 * port_task and EH. ata_port_queue_task() may be ignored for EH
1322 * Inherited from caller.
1324 void ata_port_queue_task(struct ata_port
*ap
, work_func_t fn
, void *data
,
1325 unsigned long delay
)
1327 PREPARE_DELAYED_WORK(&ap
->port_task
, fn
);
1328 ap
->port_task_data
= data
;
1330 /* may fail if ata_port_flush_task() in progress */
1331 queue_delayed_work(ata_wq
, &ap
->port_task
, delay
);
1335 * ata_port_flush_task - Flush port_task
1336 * @ap: The ata_port to flush port_task for
1338 * After this function completes, port_task is guranteed not to
1339 * be running or scheduled.
1342 * Kernel thread context (may sleep)
1344 void ata_port_flush_task(struct ata_port
*ap
)
1348 cancel_rearming_delayed_work(&ap
->port_task
);
1350 if (ata_msg_ctl(ap
))
1351 ata_port_printk(ap
, KERN_DEBUG
, "%s: EXIT\n", __FUNCTION__
);
1354 static void ata_qc_complete_internal(struct ata_queued_cmd
*qc
)
1356 struct completion
*waiting
= qc
->private_data
;
1362 * ata_exec_internal_sg - execute libata internal command
1363 * @dev: Device to which the command is sent
1364 * @tf: Taskfile registers for the command and the result
1365 * @cdb: CDB for packet command
1366 * @dma_dir: Data tranfer direction of the command
1367 * @sg: sg list for the data buffer of the command
1368 * @n_elem: Number of sg entries
1370 * Executes libata internal command with timeout. @tf contains
1371 * command on entry and result on return. Timeout and error
1372 * conditions are reported via return value. No recovery action
1373 * is taken after a command times out. It's caller's duty to
1374 * clean up after timeout.
1377 * None. Should be called with kernel context, might sleep.
1380 * Zero on success, AC_ERR_* mask on failure
1382 unsigned ata_exec_internal_sg(struct ata_device
*dev
,
1383 struct ata_taskfile
*tf
, const u8
*cdb
,
1384 int dma_dir
, struct scatterlist
*sg
,
1385 unsigned int n_elem
)
1387 struct ata_link
*link
= dev
->link
;
1388 struct ata_port
*ap
= link
->ap
;
1389 u8 command
= tf
->command
;
1390 struct ata_queued_cmd
*qc
;
1391 unsigned int tag
, preempted_tag
;
1392 u32 preempted_sactive
, preempted_qc_active
;
1393 DECLARE_COMPLETION_ONSTACK(wait
);
1394 unsigned long flags
;
1395 unsigned int err_mask
;
1398 spin_lock_irqsave(ap
->lock
, flags
);
1400 /* no internal command while frozen */
1401 if (ap
->pflags
& ATA_PFLAG_FROZEN
) {
1402 spin_unlock_irqrestore(ap
->lock
, flags
);
1403 return AC_ERR_SYSTEM
;
1406 /* initialize internal qc */
1408 /* XXX: Tag 0 is used for drivers with legacy EH as some
1409 * drivers choke if any other tag is given. This breaks
1410 * ata_tag_internal() test for those drivers. Don't use new
1411 * EH stuff without converting to it.
1413 if (ap
->ops
->error_handler
)
1414 tag
= ATA_TAG_INTERNAL
;
1418 if (test_and_set_bit(tag
, &ap
->qc_allocated
))
1420 qc
= __ata_qc_from_tag(ap
, tag
);
1428 preempted_tag
= link
->active_tag
;
1429 preempted_sactive
= link
->sactive
;
1430 preempted_qc_active
= ap
->qc_active
;
1431 link
->active_tag
= ATA_TAG_POISON
;
1435 /* prepare & issue qc */
1438 memcpy(qc
->cdb
, cdb
, ATAPI_CDB_LEN
);
1439 qc
->flags
|= ATA_QCFLAG_RESULT_TF
;
1440 qc
->dma_dir
= dma_dir
;
1441 if (dma_dir
!= DMA_NONE
) {
1442 unsigned int i
, buflen
= 0;
1444 for (i
= 0; i
< n_elem
; i
++)
1445 buflen
+= sg
[i
].length
;
1447 ata_sg_init(qc
, sg
, n_elem
);
1448 qc
->nbytes
= buflen
;
1451 qc
->private_data
= &wait
;
1452 qc
->complete_fn
= ata_qc_complete_internal
;
1456 spin_unlock_irqrestore(ap
->lock
, flags
);
1458 rc
= wait_for_completion_timeout(&wait
, ata_probe_timeout
);
1460 ata_port_flush_task(ap
);
1463 spin_lock_irqsave(ap
->lock
, flags
);
1465 /* We're racing with irq here. If we lose, the
1466 * following test prevents us from completing the qc
1467 * twice. If we win, the port is frozen and will be
1468 * cleaned up by ->post_internal_cmd().
1470 if (qc
->flags
& ATA_QCFLAG_ACTIVE
) {
1471 qc
->err_mask
|= AC_ERR_TIMEOUT
;
1473 if (ap
->ops
->error_handler
)
1474 ata_port_freeze(ap
);
1476 ata_qc_complete(qc
);
1478 if (ata_msg_warn(ap
))
1479 ata_dev_printk(dev
, KERN_WARNING
,
1480 "qc timeout (cmd 0x%x)\n", command
);
1483 spin_unlock_irqrestore(ap
->lock
, flags
);
1486 /* do post_internal_cmd */
1487 if (ap
->ops
->post_internal_cmd
)
1488 ap
->ops
->post_internal_cmd(qc
);
1490 /* perform minimal error analysis */
1491 if (qc
->flags
& ATA_QCFLAG_FAILED
) {
1492 if (qc
->result_tf
.command
& (ATA_ERR
| ATA_DF
))
1493 qc
->err_mask
|= AC_ERR_DEV
;
1496 qc
->err_mask
|= AC_ERR_OTHER
;
1498 if (qc
->err_mask
& ~AC_ERR_OTHER
)
1499 qc
->err_mask
&= ~AC_ERR_OTHER
;
1503 spin_lock_irqsave(ap
->lock
, flags
);
1505 *tf
= qc
->result_tf
;
1506 err_mask
= qc
->err_mask
;
1509 link
->active_tag
= preempted_tag
;
1510 link
->sactive
= preempted_sactive
;
1511 ap
->qc_active
= preempted_qc_active
;
1513 /* XXX - Some LLDDs (sata_mv) disable port on command failure.
1514 * Until those drivers are fixed, we detect the condition
1515 * here, fail the command with AC_ERR_SYSTEM and reenable the
1518 * Note that this doesn't change any behavior as internal
1519 * command failure results in disabling the device in the
1520 * higher layer for LLDDs without new reset/EH callbacks.
1522 * Kill the following code as soon as those drivers are fixed.
1524 if (ap
->flags
& ATA_FLAG_DISABLED
) {
1525 err_mask
|= AC_ERR_SYSTEM
;
1529 spin_unlock_irqrestore(ap
->lock
, flags
);
1535 * ata_exec_internal - execute libata internal command
1536 * @dev: Device to which the command is sent
1537 * @tf: Taskfile registers for the command and the result
1538 * @cdb: CDB for packet command
1539 * @dma_dir: Data tranfer direction of the command
1540 * @buf: Data buffer of the command
1541 * @buflen: Length of data buffer
1543 * Wrapper around ata_exec_internal_sg() which takes simple
1544 * buffer instead of sg list.
1547 * None. Should be called with kernel context, might sleep.
1550 * Zero on success, AC_ERR_* mask on failure
1552 unsigned ata_exec_internal(struct ata_device
*dev
,
1553 struct ata_taskfile
*tf
, const u8
*cdb
,
1554 int dma_dir
, void *buf
, unsigned int buflen
)
1556 struct scatterlist
*psg
= NULL
, sg
;
1557 unsigned int n_elem
= 0;
1559 if (dma_dir
!= DMA_NONE
) {
1561 sg_init_one(&sg
, buf
, buflen
);
1566 return ata_exec_internal_sg(dev
, tf
, cdb
, dma_dir
, psg
, n_elem
);
1570 * ata_do_simple_cmd - execute simple internal command
1571 * @dev: Device to which the command is sent
1572 * @cmd: Opcode to execute
1574 * Execute a 'simple' command, that only consists of the opcode
1575 * 'cmd' itself, without filling any other registers
1578 * Kernel thread context (may sleep).
1581 * Zero on success, AC_ERR_* mask on failure
1583 unsigned int ata_do_simple_cmd(struct ata_device
*dev
, u8 cmd
)
1585 struct ata_taskfile tf
;
1587 ata_tf_init(dev
, &tf
);
1590 tf
.flags
|= ATA_TFLAG_DEVICE
;
1591 tf
.protocol
= ATA_PROT_NODATA
;
1593 return ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
1597 * ata_pio_need_iordy - check if iordy needed
1600 * Check if the current speed of the device requires IORDY. Used
1601 * by various controllers for chip configuration.
1604 unsigned int ata_pio_need_iordy(const struct ata_device
*adev
)
1606 /* Controller doesn't support IORDY. Probably a pointless check
1607 as the caller should know this */
1608 if (adev
->link
->ap
->flags
& ATA_FLAG_NO_IORDY
)
1610 /* PIO3 and higher it is mandatory */
1611 if (adev
->pio_mode
> XFER_PIO_2
)
1613 /* We turn it on when possible */
1614 if (ata_id_has_iordy(adev
->id
))
1620 * ata_pio_mask_no_iordy - Return the non IORDY mask
1623 * Compute the highest mode possible if we are not using iordy. Return
1624 * -1 if no iordy mode is available.
1627 static u32
ata_pio_mask_no_iordy(const struct ata_device
*adev
)
1629 /* If we have no drive specific rule, then PIO 2 is non IORDY */
1630 if (adev
->id
[ATA_ID_FIELD_VALID
] & 2) { /* EIDE */
1631 u16 pio
= adev
->id
[ATA_ID_EIDE_PIO
];
1632 /* Is the speed faster than the drive allows non IORDY ? */
1634 /* This is cycle times not frequency - watch the logic! */
1635 if (pio
> 240) /* PIO2 is 240nS per cycle */
1636 return 3 << ATA_SHIFT_PIO
;
1637 return 7 << ATA_SHIFT_PIO
;
1640 return 3 << ATA_SHIFT_PIO
;
1644 * ata_dev_read_id - Read ID data from the specified device
1645 * @dev: target device
1646 * @p_class: pointer to class of the target device (may be changed)
1647 * @flags: ATA_READID_* flags
1648 * @id: buffer to read IDENTIFY data into
1650 * Read ID data from the specified device. ATA_CMD_ID_ATA is
1651 * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
1652 * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
1653 * for pre-ATA4 drives.
1655 * FIXME: ATA_CMD_ID_ATA is optional for early drives and right
1656 * now we abort if we hit that case.
1659 * Kernel thread context (may sleep)
1662 * 0 on success, -errno otherwise.
1664 int ata_dev_read_id(struct ata_device
*dev
, unsigned int *p_class
,
1665 unsigned int flags
, u16
*id
)
1667 struct ata_port
*ap
= dev
->link
->ap
;
1668 unsigned int class = *p_class
;
1669 struct ata_taskfile tf
;
1670 unsigned int err_mask
= 0;
1672 int may_fallback
= 1, tried_spinup
= 0;
1675 if (ata_msg_ctl(ap
))
1676 ata_dev_printk(dev
, KERN_DEBUG
, "%s: ENTER\n", __FUNCTION__
);
1678 ata_dev_select(ap
, dev
->devno
, 1, 1); /* select device 0/1 */
1680 ata_tf_init(dev
, &tf
);
1684 tf
.command
= ATA_CMD_ID_ATA
;
1687 tf
.command
= ATA_CMD_ID_ATAPI
;
1691 reason
= "unsupported class";
1695 tf
.protocol
= ATA_PROT_PIO
;
1697 /* Some devices choke if TF registers contain garbage. Make
1698 * sure those are properly initialized.
1700 tf
.flags
|= ATA_TFLAG_ISADDR
| ATA_TFLAG_DEVICE
;
1702 /* Device presence detection is unreliable on some
1703 * controllers. Always poll IDENTIFY if available.
1705 tf
.flags
|= ATA_TFLAG_POLLING
;
1707 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_FROM_DEVICE
,
1708 id
, sizeof(id
[0]) * ATA_ID_WORDS
);
1710 if (err_mask
& AC_ERR_NODEV_HINT
) {
1711 DPRINTK("ata%u.%d: NODEV after polling detection\n",
1712 ap
->print_id
, dev
->devno
);
1716 /* Device or controller might have reported the wrong
1717 * device class. Give a shot at the other IDENTIFY if
1718 * the current one is aborted by the device.
1721 (err_mask
== AC_ERR_DEV
) && (tf
.feature
& ATA_ABORTED
)) {
1724 if (class == ATA_DEV_ATA
)
1725 class = ATA_DEV_ATAPI
;
1727 class = ATA_DEV_ATA
;
1732 reason
= "I/O error";
1736 /* Falling back doesn't make sense if ID data was read
1737 * successfully at least once.
1741 swap_buf_le16(id
, ATA_ID_WORDS
);
1745 reason
= "device reports invalid type";
1747 if (class == ATA_DEV_ATA
) {
1748 if (!ata_id_is_ata(id
) && !ata_id_is_cfa(id
))
1751 if (ata_id_is_ata(id
))
1755 if (!tried_spinup
&& (id
[2] == 0x37c8 || id
[2] == 0x738c)) {
1758 * Drive powered-up in standby mode, and requires a specific
1759 * SET_FEATURES spin-up subcommand before it will accept
1760 * anything other than the original IDENTIFY command.
1762 ata_tf_init(dev
, &tf
);
1763 tf
.command
= ATA_CMD_SET_FEATURES
;
1764 tf
.feature
= SETFEATURES_SPINUP
;
1765 tf
.protocol
= ATA_PROT_NODATA
;
1766 tf
.flags
|= ATA_TFLAG_ISADDR
| ATA_TFLAG_DEVICE
;
1767 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
1768 if (err_mask
&& id
[2] != 0x738c) {
1770 reason
= "SPINUP failed";
1774 * If the drive initially returned incomplete IDENTIFY info,
1775 * we now must reissue the IDENTIFY command.
1777 if (id
[2] == 0x37c8)
1781 if ((flags
& ATA_READID_POSTRESET
) && class == ATA_DEV_ATA
) {
1783 * The exact sequence expected by certain pre-ATA4 drives is:
1785 * IDENTIFY (optional in early ATA)
1786 * INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
1788 * Some drives were very specific about that exact sequence.
1790 * Note that ATA4 says lba is mandatory so the second check
1791 * shoud never trigger.
1793 if (ata_id_major_version(id
) < 4 || !ata_id_has_lba(id
)) {
1794 err_mask
= ata_dev_init_params(dev
, id
[3], id
[6]);
1797 reason
= "INIT_DEV_PARAMS failed";
1801 /* current CHS translation info (id[53-58]) might be
1802 * changed. reread the identify device info.
1804 flags
&= ~ATA_READID_POSTRESET
;
1814 if (ata_msg_warn(ap
))
1815 ata_dev_printk(dev
, KERN_WARNING
, "failed to IDENTIFY "
1816 "(%s, err_mask=0x%x)\n", reason
, err_mask
);
1820 static inline u8
ata_dev_knobble(struct ata_device
*dev
)
1822 struct ata_port
*ap
= dev
->link
->ap
;
1823 return ((ap
->cbl
== ATA_CBL_SATA
) && (!ata_id_is_sata(dev
->id
)));
1826 static void ata_dev_config_ncq(struct ata_device
*dev
,
1827 char *desc
, size_t desc_sz
)
1829 struct ata_port
*ap
= dev
->link
->ap
;
1830 int hdepth
= 0, ddepth
= ata_id_queue_depth(dev
->id
);
1832 if (!ata_id_has_ncq(dev
->id
)) {
1836 if (dev
->horkage
& ATA_HORKAGE_NONCQ
) {
1837 snprintf(desc
, desc_sz
, "NCQ (not used)");
1840 if (ap
->flags
& ATA_FLAG_NCQ
) {
1841 hdepth
= min(ap
->scsi_host
->can_queue
, ATA_MAX_QUEUE
- 1);
1842 dev
->flags
|= ATA_DFLAG_NCQ
;
1845 if (hdepth
>= ddepth
)
1846 snprintf(desc
, desc_sz
, "NCQ (depth %d)", ddepth
);
1848 snprintf(desc
, desc_sz
, "NCQ (depth %d/%d)", hdepth
, ddepth
);
1852 * ata_dev_configure - Configure the specified ATA/ATAPI device
1853 * @dev: Target device to configure
1855 * Configure @dev according to @dev->id. Generic and low-level
1856 * driver specific fixups are also applied.
1859 * Kernel thread context (may sleep)
1862 * 0 on success, -errno otherwise
1864 int ata_dev_configure(struct ata_device
*dev
)
1866 struct ata_port
*ap
= dev
->link
->ap
;
1867 struct ata_eh_context
*ehc
= &dev
->link
->eh_context
;
1868 int print_info
= ehc
->i
.flags
& ATA_EHI_PRINTINFO
;
1869 const u16
*id
= dev
->id
;
1870 unsigned int xfer_mask
;
1871 char revbuf
[7]; /* XYZ-99\0 */
1872 char fwrevbuf
[ATA_ID_FW_REV_LEN
+1];
1873 char modelbuf
[ATA_ID_PROD_LEN
+1];
1876 if (!ata_dev_enabled(dev
) && ata_msg_info(ap
)) {
1877 ata_dev_printk(dev
, KERN_INFO
, "%s: ENTER/EXIT -- nodev\n",
1882 if (ata_msg_probe(ap
))
1883 ata_dev_printk(dev
, KERN_DEBUG
, "%s: ENTER\n", __FUNCTION__
);
1886 dev
->horkage
|= ata_dev_blacklisted(dev
);
1888 /* let ACPI work its magic */
1889 rc
= ata_acpi_on_devcfg(dev
);
1893 /* massage HPA, do it early as it might change IDENTIFY data */
1894 rc
= ata_hpa_resize(dev
);
1898 /* print device capabilities */
1899 if (ata_msg_probe(ap
))
1900 ata_dev_printk(dev
, KERN_DEBUG
,
1901 "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
1902 "85:%04x 86:%04x 87:%04x 88:%04x\n",
1904 id
[49], id
[82], id
[83], id
[84],
1905 id
[85], id
[86], id
[87], id
[88]);
1907 /* initialize to-be-configured parameters */
1908 dev
->flags
&= ~ATA_DFLAG_CFG_MASK
;
1909 dev
->max_sectors
= 0;
1917 * common ATA, ATAPI feature tests
1920 /* find max transfer mode; for printk only */
1921 xfer_mask
= ata_id_xfermask(id
);
1923 if (ata_msg_probe(ap
))
1926 /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
1927 ata_id_c_string(dev
->id
, fwrevbuf
, ATA_ID_FW_REV
,
1930 ata_id_c_string(dev
->id
, modelbuf
, ATA_ID_PROD
,
1933 /* ATA-specific feature tests */
1934 if (dev
->class == ATA_DEV_ATA
) {
1935 if (ata_id_is_cfa(id
)) {
1936 if (id
[162] & 1) /* CPRM may make this media unusable */
1937 ata_dev_printk(dev
, KERN_WARNING
,
1938 "supports DRM functions and may "
1939 "not be fully accessable.\n");
1940 snprintf(revbuf
, 7, "CFA");
1943 snprintf(revbuf
, 7, "ATA-%d", ata_id_major_version(id
));
1945 dev
->n_sectors
= ata_id_n_sectors(id
);
1947 if (dev
->id
[59] & 0x100)
1948 dev
->multi_count
= dev
->id
[59] & 0xff;
1950 if (ata_id_has_lba(id
)) {
1951 const char *lba_desc
;
1955 dev
->flags
|= ATA_DFLAG_LBA
;
1956 if (ata_id_has_lba48(id
)) {
1957 dev
->flags
|= ATA_DFLAG_LBA48
;
1960 if (dev
->n_sectors
>= (1UL << 28) &&
1961 ata_id_has_flush_ext(id
))
1962 dev
->flags
|= ATA_DFLAG_FLUSH_EXT
;
1966 ata_dev_config_ncq(dev
, ncq_desc
, sizeof(ncq_desc
));
1968 /* print device info to dmesg */
1969 if (ata_msg_drv(ap
) && print_info
) {
1970 ata_dev_printk(dev
, KERN_INFO
,
1971 "%s: %s, %s, max %s\n",
1972 revbuf
, modelbuf
, fwrevbuf
,
1973 ata_mode_string(xfer_mask
));
1974 ata_dev_printk(dev
, KERN_INFO
,
1975 "%Lu sectors, multi %u: %s %s\n",
1976 (unsigned long long)dev
->n_sectors
,
1977 dev
->multi_count
, lba_desc
, ncq_desc
);
1982 /* Default translation */
1983 dev
->cylinders
= id
[1];
1985 dev
->sectors
= id
[6];
1987 if (ata_id_current_chs_valid(id
)) {
1988 /* Current CHS translation is valid. */
1989 dev
->cylinders
= id
[54];
1990 dev
->heads
= id
[55];
1991 dev
->sectors
= id
[56];
1994 /* print device info to dmesg */
1995 if (ata_msg_drv(ap
) && print_info
) {
1996 ata_dev_printk(dev
, KERN_INFO
,
1997 "%s: %s, %s, max %s\n",
1998 revbuf
, modelbuf
, fwrevbuf
,
1999 ata_mode_string(xfer_mask
));
2000 ata_dev_printk(dev
, KERN_INFO
,
2001 "%Lu sectors, multi %u, CHS %u/%u/%u\n",
2002 (unsigned long long)dev
->n_sectors
,
2003 dev
->multi_count
, dev
->cylinders
,
2004 dev
->heads
, dev
->sectors
);
2011 /* ATAPI-specific feature tests */
2012 else if (dev
->class == ATA_DEV_ATAPI
) {
2013 char *cdb_intr_string
= "";
2015 rc
= atapi_cdb_len(id
);
2016 if ((rc
< 12) || (rc
> ATAPI_CDB_LEN
)) {
2017 if (ata_msg_warn(ap
))
2018 ata_dev_printk(dev
, KERN_WARNING
,
2019 "unsupported CDB len\n");
2023 dev
->cdb_len
= (unsigned int) rc
;
2026 * check to see if this ATAPI device supports
2027 * Asynchronous Notification
2029 if ((ap
->flags
& ATA_FLAG_AN
) && ata_id_has_AN(id
)) {
2031 /* issue SET feature command to turn this on */
2032 err
= ata_dev_set_AN(dev
, SETFEATURES_SATA_ENABLE
);
2034 ata_dev_printk(dev
, KERN_ERR
,
2035 "unable to set AN, err %x\n",
2038 dev
->flags
|= ATA_DFLAG_AN
;
2041 if (ata_id_cdb_intr(dev
->id
)) {
2042 dev
->flags
|= ATA_DFLAG_CDB_INTR
;
2043 cdb_intr_string
= ", CDB intr";
2046 /* print device info to dmesg */
2047 if (ata_msg_drv(ap
) && print_info
)
2048 ata_dev_printk(dev
, KERN_INFO
,
2049 "ATAPI: %s, %s, max %s%s\n",
2051 ata_mode_string(xfer_mask
),
2055 /* determine max_sectors */
2056 dev
->max_sectors
= ATA_MAX_SECTORS
;
2057 if (dev
->flags
& ATA_DFLAG_LBA48
)
2058 dev
->max_sectors
= ATA_MAX_SECTORS_LBA48
;
2060 if (dev
->horkage
& ATA_HORKAGE_DIAGNOSTIC
) {
2061 /* Let the user know. We don't want to disallow opens for
2062 rescue purposes, or in case the vendor is just a blithering
2065 ata_dev_printk(dev
, KERN_WARNING
,
2066 "Drive reports diagnostics failure. This may indicate a drive\n");
2067 ata_dev_printk(dev
, KERN_WARNING
,
2068 "fault or invalid emulation. Contact drive vendor for information.\n");
2072 /* limit bridge transfers to udma5, 200 sectors */
2073 if (ata_dev_knobble(dev
)) {
2074 if (ata_msg_drv(ap
) && print_info
)
2075 ata_dev_printk(dev
, KERN_INFO
,
2076 "applying bridge limits\n");
2077 dev
->udma_mask
&= ATA_UDMA5
;
2078 dev
->max_sectors
= ATA_MAX_SECTORS
;
2081 if (dev
->horkage
& ATA_HORKAGE_MAX_SEC_128
)
2082 dev
->max_sectors
= min_t(unsigned int, ATA_MAX_SECTORS_128
,
2085 if (ap
->ops
->dev_config
)
2086 ap
->ops
->dev_config(dev
);
2088 if (ata_msg_probe(ap
))
2089 ata_dev_printk(dev
, KERN_DEBUG
, "%s: EXIT, drv_stat = 0x%x\n",
2090 __FUNCTION__
, ata_chk_status(ap
));
2094 if (ata_msg_probe(ap
))
2095 ata_dev_printk(dev
, KERN_DEBUG
,
2096 "%s: EXIT, err\n", __FUNCTION__
);
2101 * ata_cable_40wire - return 40 wire cable type
2104 * Helper method for drivers which want to hardwire 40 wire cable
2108 int ata_cable_40wire(struct ata_port
*ap
)
2110 return ATA_CBL_PATA40
;
2114 * ata_cable_80wire - return 80 wire cable type
2117 * Helper method for drivers which want to hardwire 80 wire cable
2121 int ata_cable_80wire(struct ata_port
*ap
)
2123 return ATA_CBL_PATA80
;
2127 * ata_cable_unknown - return unknown PATA cable.
2130 * Helper method for drivers which have no PATA cable detection.
2133 int ata_cable_unknown(struct ata_port
*ap
)
2135 return ATA_CBL_PATA_UNK
;
2139 * ata_cable_sata - return SATA cable type
2142 * Helper method for drivers which have SATA cables
2145 int ata_cable_sata(struct ata_port
*ap
)
2147 return ATA_CBL_SATA
;
2151 * ata_bus_probe - Reset and probe ATA bus
2154 * Master ATA bus probing function. Initiates a hardware-dependent
2155 * bus reset, then attempts to identify any devices found on
2159 * PCI/etc. bus probe sem.
2162 * Zero on success, negative errno otherwise.
2165 int ata_bus_probe(struct ata_port
*ap
)
2167 unsigned int classes
[ATA_MAX_DEVICES
];
2168 int tries
[ATA_MAX_DEVICES
];
2170 struct ata_device
*dev
;
2174 ata_link_for_each_dev(dev
, &ap
->link
)
2175 tries
[dev
->devno
] = ATA_PROBE_MAX_TRIES
;
2178 /* reset and determine device classes */
2179 ap
->ops
->phy_reset(ap
);
2181 ata_link_for_each_dev(dev
, &ap
->link
) {
2182 if (!(ap
->flags
& ATA_FLAG_DISABLED
) &&
2183 dev
->class != ATA_DEV_UNKNOWN
)
2184 classes
[dev
->devno
] = dev
->class;
2186 classes
[dev
->devno
] = ATA_DEV_NONE
;
2188 dev
->class = ATA_DEV_UNKNOWN
;
2193 /* after the reset the device state is PIO 0 and the controller
2194 state is undefined. Record the mode */
2196 ata_link_for_each_dev(dev
, &ap
->link
)
2197 dev
->pio_mode
= XFER_PIO_0
;
2199 /* read IDENTIFY page and configure devices. We have to do the identify
2200 specific sequence bass-ackwards so that PDIAG- is released by
2203 ata_link_for_each_dev(dev
, &ap
->link
) {
2204 if (tries
[dev
->devno
])
2205 dev
->class = classes
[dev
->devno
];
2207 if (!ata_dev_enabled(dev
))
2210 rc
= ata_dev_read_id(dev
, &dev
->class, ATA_READID_POSTRESET
,
2216 /* Now ask for the cable type as PDIAG- should have been released */
2217 if (ap
->ops
->cable_detect
)
2218 ap
->cbl
= ap
->ops
->cable_detect(ap
);
2220 /* We may have SATA bridge glue hiding here irrespective of the
2221 reported cable types and sensed types */
2222 ata_link_for_each_dev(dev
, &ap
->link
) {
2223 if (!ata_dev_enabled(dev
))
2225 /* SATA drives indicate we have a bridge. We don't know which
2226 end of the link the bridge is which is a problem */
2227 if (ata_id_is_sata(dev
->id
))
2228 ap
->cbl
= ATA_CBL_SATA
;
2231 /* After the identify sequence we can now set up the devices. We do
2232 this in the normal order so that the user doesn't get confused */
2234 ata_link_for_each_dev(dev
, &ap
->link
) {
2235 if (!ata_dev_enabled(dev
))
2238 ap
->link
.eh_context
.i
.flags
|= ATA_EHI_PRINTINFO
;
2239 rc
= ata_dev_configure(dev
);
2240 ap
->link
.eh_context
.i
.flags
&= ~ATA_EHI_PRINTINFO
;
2245 /* configure transfer mode */
2246 rc
= ata_set_mode(&ap
->link
, &dev
);
2250 ata_link_for_each_dev(dev
, &ap
->link
)
2251 if (ata_dev_enabled(dev
))
2254 /* no device present, disable port */
2255 ata_port_disable(ap
);
2259 tries
[dev
->devno
]--;
2263 /* eeek, something went very wrong, give up */
2264 tries
[dev
->devno
] = 0;
2268 /* give it just one more chance */
2269 tries
[dev
->devno
] = min(tries
[dev
->devno
], 1);
2271 if (tries
[dev
->devno
] == 1) {
2272 /* This is the last chance, better to slow
2273 * down than lose it.
2275 sata_down_spd_limit(&ap
->link
);
2276 ata_down_xfermask_limit(dev
, ATA_DNXFER_PIO
);
2280 if (!tries
[dev
->devno
])
2281 ata_dev_disable(dev
);
2287 * ata_port_probe - Mark port as enabled
2288 * @ap: Port for which we indicate enablement
2290 * Modify @ap data structure such that the system
2291 * thinks that the entire port is enabled.
2293 * LOCKING: host lock, or some other form of
2297 void ata_port_probe(struct ata_port
*ap
)
2299 ap
->flags
&= ~ATA_FLAG_DISABLED
;
2303 * sata_print_link_status - Print SATA link status
2304 * @link: SATA link to printk link status about
2306 * This function prints link speed and status of a SATA link.
2311 void sata_print_link_status(struct ata_link
*link
)
2313 u32 sstatus
, scontrol
, tmp
;
2315 if (sata_scr_read(link
, SCR_STATUS
, &sstatus
))
2317 sata_scr_read(link
, SCR_CONTROL
, &scontrol
);
2319 if (ata_link_online(link
)) {
2320 tmp
= (sstatus
>> 4) & 0xf;
2321 ata_link_printk(link
, KERN_INFO
,
2322 "SATA link up %s (SStatus %X SControl %X)\n",
2323 sata_spd_string(tmp
), sstatus
, scontrol
);
2325 ata_link_printk(link
, KERN_INFO
,
2326 "SATA link down (SStatus %X SControl %X)\n",
2332 * __sata_phy_reset - Wake/reset a low-level SATA PHY
2333 * @ap: SATA port associated with target SATA PHY.
2335 * This function issues commands to standard SATA Sxxx
2336 * PHY registers, to wake up the phy (and device), and
2337 * clear any reset condition.
2340 * PCI/etc. bus probe sem.
2343 void __sata_phy_reset(struct ata_port
*ap
)
2345 struct ata_link
*link
= &ap
->link
;
2346 unsigned long timeout
= jiffies
+ (HZ
* 5);
2349 if (ap
->flags
& ATA_FLAG_SATA_RESET
) {
2350 /* issue phy wake/reset */
2351 sata_scr_write_flush(link
, SCR_CONTROL
, 0x301);
2352 /* Couldn't find anything in SATA I/II specs, but
2353 * AHCI-1.1 10.4.2 says at least 1 ms. */
2356 /* phy wake/clear reset */
2357 sata_scr_write_flush(link
, SCR_CONTROL
, 0x300);
2359 /* wait for phy to become ready, if necessary */
2362 sata_scr_read(link
, SCR_STATUS
, &sstatus
);
2363 if ((sstatus
& 0xf) != 1)
2365 } while (time_before(jiffies
, timeout
));
2367 /* print link status */
2368 sata_print_link_status(link
);
2370 /* TODO: phy layer with polling, timeouts, etc. */
2371 if (!ata_link_offline(link
))
2374 ata_port_disable(ap
);
2376 if (ap
->flags
& ATA_FLAG_DISABLED
)
2379 if (ata_busy_sleep(ap
, ATA_TMOUT_BOOT_QUICK
, ATA_TMOUT_BOOT
)) {
2380 ata_port_disable(ap
);
2384 ap
->cbl
= ATA_CBL_SATA
;
2388 * sata_phy_reset - Reset SATA bus.
2389 * @ap: SATA port associated with target SATA PHY.
2391 * This function resets the SATA bus, and then probes
2392 * the bus for devices.
2395 * PCI/etc. bus probe sem.
2398 void sata_phy_reset(struct ata_port
*ap
)
2400 __sata_phy_reset(ap
);
2401 if (ap
->flags
& ATA_FLAG_DISABLED
)
2407 * ata_dev_pair - return other device on cable
2410 * Obtain the other device on the same cable, or if none is
2411 * present NULL is returned
2414 struct ata_device
*ata_dev_pair(struct ata_device
*adev
)
2416 struct ata_link
*link
= adev
->link
;
2417 struct ata_device
*pair
= &link
->device
[1 - adev
->devno
];
2418 if (!ata_dev_enabled(pair
))
2424 * ata_port_disable - Disable port.
2425 * @ap: Port to be disabled.
2427 * Modify @ap data structure such that the system
2428 * thinks that the entire port is disabled, and should
2429 * never attempt to probe or communicate with devices
2432 * LOCKING: host lock, or some other form of
2436 void ata_port_disable(struct ata_port
*ap
)
2438 ap
->link
.device
[0].class = ATA_DEV_NONE
;
2439 ap
->link
.device
[1].class = ATA_DEV_NONE
;
2440 ap
->flags
|= ATA_FLAG_DISABLED
;
2444 * sata_down_spd_limit - adjust SATA spd limit downward
2445 * @link: Link to adjust SATA spd limit for
2447 * Adjust SATA spd limit of @link downward. Note that this
2448 * function only adjusts the limit. The change must be applied
2449 * using sata_set_spd().
2452 * Inherited from caller.
2455 * 0 on success, negative errno on failure
2457 int sata_down_spd_limit(struct ata_link
*link
)
2459 u32 sstatus
, spd
, mask
;
2462 if (!sata_scr_valid(link
))
2465 /* If SCR can be read, use it to determine the current SPD.
2466 * If not, use cached value in link->sata_spd.
2468 rc
= sata_scr_read(link
, SCR_STATUS
, &sstatus
);
2470 spd
= (sstatus
>> 4) & 0xf;
2472 spd
= link
->sata_spd
;
2474 mask
= link
->sata_spd_limit
;
2478 /* unconditionally mask off the highest bit */
2479 highbit
= fls(mask
) - 1;
2480 mask
&= ~(1 << highbit
);
2482 /* Mask off all speeds higher than or equal to the current
2483 * one. Force 1.5Gbps if current SPD is not available.
2486 mask
&= (1 << (spd
- 1)) - 1;
2490 /* were we already at the bottom? */
2494 link
->sata_spd_limit
= mask
;
2496 ata_link_printk(link
, KERN_WARNING
, "limiting SATA link speed to %s\n",
2497 sata_spd_string(fls(mask
)));
2502 static int __sata_set_spd_needed(struct ata_link
*link
, u32
*scontrol
)
2506 if (link
->sata_spd_limit
== UINT_MAX
)
2509 limit
= fls(link
->sata_spd_limit
);
2511 spd
= (*scontrol
>> 4) & 0xf;
2512 *scontrol
= (*scontrol
& ~0xf0) | ((limit
& 0xf) << 4);
2514 return spd
!= limit
;
2518 * sata_set_spd_needed - is SATA spd configuration needed
2519 * @link: Link in question
2521 * Test whether the spd limit in SControl matches
2522 * @link->sata_spd_limit. This function is used to determine
2523 * whether hardreset is necessary to apply SATA spd
2527 * Inherited from caller.
2530 * 1 if SATA spd configuration is needed, 0 otherwise.
2532 int sata_set_spd_needed(struct ata_link
*link
)
2536 if (sata_scr_read(link
, SCR_CONTROL
, &scontrol
))
2539 return __sata_set_spd_needed(link
, &scontrol
);
2543 * sata_set_spd - set SATA spd according to spd limit
2544 * @link: Link to set SATA spd for
2546 * Set SATA spd of @link according to sata_spd_limit.
2549 * Inherited from caller.
2552 * 0 if spd doesn't need to be changed, 1 if spd has been
2553 * changed. Negative errno if SCR registers are inaccessible.
2555 int sata_set_spd(struct ata_link
*link
)
2560 if ((rc
= sata_scr_read(link
, SCR_CONTROL
, &scontrol
)))
2563 if (!__sata_set_spd_needed(link
, &scontrol
))
2566 if ((rc
= sata_scr_write(link
, SCR_CONTROL
, scontrol
)))
2573 * This mode timing computation functionality is ported over from
2574 * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
2577 * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
2578 * These were taken from ATA/ATAPI-6 standard, rev 0a, except
2579 * for UDMA6, which is currently supported only by Maxtor drives.
2581 * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
2584 static const struct ata_timing ata_timing
[] = {
2586 { XFER_UDMA_6
, 0, 0, 0, 0, 0, 0, 0, 15 },
2587 { XFER_UDMA_5
, 0, 0, 0, 0, 0, 0, 0, 20 },
2588 { XFER_UDMA_4
, 0, 0, 0, 0, 0, 0, 0, 30 },
2589 { XFER_UDMA_3
, 0, 0, 0, 0, 0, 0, 0, 45 },
2591 { XFER_MW_DMA_4
, 25, 0, 0, 0, 55, 20, 80, 0 },
2592 { XFER_MW_DMA_3
, 25, 0, 0, 0, 65, 25, 100, 0 },
2593 { XFER_UDMA_2
, 0, 0, 0, 0, 0, 0, 0, 60 },
2594 { XFER_UDMA_1
, 0, 0, 0, 0, 0, 0, 0, 80 },
2595 { XFER_UDMA_0
, 0, 0, 0, 0, 0, 0, 0, 120 },
2597 /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
2599 { XFER_MW_DMA_2
, 25, 0, 0, 0, 70, 25, 120, 0 },
2600 { XFER_MW_DMA_1
, 45, 0, 0, 0, 80, 50, 150, 0 },
2601 { XFER_MW_DMA_0
, 60, 0, 0, 0, 215, 215, 480, 0 },
2603 { XFER_SW_DMA_2
, 60, 0, 0, 0, 120, 120, 240, 0 },
2604 { XFER_SW_DMA_1
, 90, 0, 0, 0, 240, 240, 480, 0 },
2605 { XFER_SW_DMA_0
, 120, 0, 0, 0, 480, 480, 960, 0 },
2607 { XFER_PIO_6
, 10, 55, 20, 80, 55, 20, 80, 0 },
2608 { XFER_PIO_5
, 15, 65, 25, 100, 65, 25, 100, 0 },
2609 { XFER_PIO_4
, 25, 70, 25, 120, 70, 25, 120, 0 },
2610 { XFER_PIO_3
, 30, 80, 70, 180, 80, 70, 180, 0 },
2612 { XFER_PIO_2
, 30, 290, 40, 330, 100, 90, 240, 0 },
2613 { XFER_PIO_1
, 50, 290, 93, 383, 125, 100, 383, 0 },
2614 { XFER_PIO_0
, 70, 290, 240, 600, 165, 150, 600, 0 },
2616 /* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
2621 #define ENOUGH(v,unit) (((v)-1)/(unit)+1)
2622 #define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
2624 static void ata_timing_quantize(const struct ata_timing
*t
, struct ata_timing
*q
, int T
, int UT
)
2626 q
->setup
= EZ(t
->setup
* 1000, T
);
2627 q
->act8b
= EZ(t
->act8b
* 1000, T
);
2628 q
->rec8b
= EZ(t
->rec8b
* 1000, T
);
2629 q
->cyc8b
= EZ(t
->cyc8b
* 1000, T
);
2630 q
->active
= EZ(t
->active
* 1000, T
);
2631 q
->recover
= EZ(t
->recover
* 1000, T
);
2632 q
->cycle
= EZ(t
->cycle
* 1000, T
);
2633 q
->udma
= EZ(t
->udma
* 1000, UT
);
2636 void ata_timing_merge(const struct ata_timing
*a
, const struct ata_timing
*b
,
2637 struct ata_timing
*m
, unsigned int what
)
2639 if (what
& ATA_TIMING_SETUP
) m
->setup
= max(a
->setup
, b
->setup
);
2640 if (what
& ATA_TIMING_ACT8B
) m
->act8b
= max(a
->act8b
, b
->act8b
);
2641 if (what
& ATA_TIMING_REC8B
) m
->rec8b
= max(a
->rec8b
, b
->rec8b
);
2642 if (what
& ATA_TIMING_CYC8B
) m
->cyc8b
= max(a
->cyc8b
, b
->cyc8b
);
2643 if (what
& ATA_TIMING_ACTIVE
) m
->active
= max(a
->active
, b
->active
);
2644 if (what
& ATA_TIMING_RECOVER
) m
->recover
= max(a
->recover
, b
->recover
);
2645 if (what
& ATA_TIMING_CYCLE
) m
->cycle
= max(a
->cycle
, b
->cycle
);
2646 if (what
& ATA_TIMING_UDMA
) m
->udma
= max(a
->udma
, b
->udma
);
2649 static const struct ata_timing
* ata_timing_find_mode(unsigned short speed
)
2651 const struct ata_timing
*t
;
2653 for (t
= ata_timing
; t
->mode
!= speed
; t
++)
2654 if (t
->mode
== 0xFF)
2659 int ata_timing_compute(struct ata_device
*adev
, unsigned short speed
,
2660 struct ata_timing
*t
, int T
, int UT
)
2662 const struct ata_timing
*s
;
2663 struct ata_timing p
;
2669 if (!(s
= ata_timing_find_mode(speed
)))
2672 memcpy(t
, s
, sizeof(*s
));
2675 * If the drive is an EIDE drive, it can tell us it needs extended
2676 * PIO/MW_DMA cycle timing.
2679 if (adev
->id
[ATA_ID_FIELD_VALID
] & 2) { /* EIDE drive */
2680 memset(&p
, 0, sizeof(p
));
2681 if(speed
>= XFER_PIO_0
&& speed
<= XFER_SW_DMA_0
) {
2682 if (speed
<= XFER_PIO_2
) p
.cycle
= p
.cyc8b
= adev
->id
[ATA_ID_EIDE_PIO
];
2683 else p
.cycle
= p
.cyc8b
= adev
->id
[ATA_ID_EIDE_PIO_IORDY
];
2684 } else if(speed
>= XFER_MW_DMA_0
&& speed
<= XFER_MW_DMA_2
) {
2685 p
.cycle
= adev
->id
[ATA_ID_EIDE_DMA_MIN
];
2687 ata_timing_merge(&p
, t
, t
, ATA_TIMING_CYCLE
| ATA_TIMING_CYC8B
);
2691 * Convert the timing to bus clock counts.
2694 ata_timing_quantize(t
, t
, T
, UT
);
2697 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
2698 * S.M.A.R.T * and some other commands. We have to ensure that the
2699 * DMA cycle timing is slower/equal than the fastest PIO timing.
2702 if (speed
> XFER_PIO_6
) {
2703 ata_timing_compute(adev
, adev
->pio_mode
, &p
, T
, UT
);
2704 ata_timing_merge(&p
, t
, t
, ATA_TIMING_ALL
);
2708 * Lengthen active & recovery time so that cycle time is correct.
2711 if (t
->act8b
+ t
->rec8b
< t
->cyc8b
) {
2712 t
->act8b
+= (t
->cyc8b
- (t
->act8b
+ t
->rec8b
)) / 2;
2713 t
->rec8b
= t
->cyc8b
- t
->act8b
;
2716 if (t
->active
+ t
->recover
< t
->cycle
) {
2717 t
->active
+= (t
->cycle
- (t
->active
+ t
->recover
)) / 2;
2718 t
->recover
= t
->cycle
- t
->active
;
2721 /* In a few cases quantisation may produce enough errors to
2722 leave t->cycle too low for the sum of active and recovery
2723 if so we must correct this */
2724 if (t
->active
+ t
->recover
> t
->cycle
)
2725 t
->cycle
= t
->active
+ t
->recover
;
2731 * ata_down_xfermask_limit - adjust dev xfer masks downward
2732 * @dev: Device to adjust xfer masks
2733 * @sel: ATA_DNXFER_* selector
2735 * Adjust xfer masks of @dev downward. Note that this function
2736 * does not apply the change. Invoking ata_set_mode() afterwards
2737 * will apply the limit.
2740 * Inherited from caller.
2743 * 0 on success, negative errno on failure
2745 int ata_down_xfermask_limit(struct ata_device
*dev
, unsigned int sel
)
2748 unsigned int orig_mask
, xfer_mask
;
2749 unsigned int pio_mask
, mwdma_mask
, udma_mask
;
2752 quiet
= !!(sel
& ATA_DNXFER_QUIET
);
2753 sel
&= ~ATA_DNXFER_QUIET
;
2755 xfer_mask
= orig_mask
= ata_pack_xfermask(dev
->pio_mask
,
2758 ata_unpack_xfermask(xfer_mask
, &pio_mask
, &mwdma_mask
, &udma_mask
);
2761 case ATA_DNXFER_PIO
:
2762 highbit
= fls(pio_mask
) - 1;
2763 pio_mask
&= ~(1 << highbit
);
2766 case ATA_DNXFER_DMA
:
2768 highbit
= fls(udma_mask
) - 1;
2769 udma_mask
&= ~(1 << highbit
);
2772 } else if (mwdma_mask
) {
2773 highbit
= fls(mwdma_mask
) - 1;
2774 mwdma_mask
&= ~(1 << highbit
);
2780 case ATA_DNXFER_40C
:
2781 udma_mask
&= ATA_UDMA_MASK_40C
;
2784 case ATA_DNXFER_FORCE_PIO0
:
2786 case ATA_DNXFER_FORCE_PIO
:
2795 xfer_mask
&= ata_pack_xfermask(pio_mask
, mwdma_mask
, udma_mask
);
2797 if (!(xfer_mask
& ATA_MASK_PIO
) || xfer_mask
== orig_mask
)
2801 if (xfer_mask
& (ATA_MASK_MWDMA
| ATA_MASK_UDMA
))
2802 snprintf(buf
, sizeof(buf
), "%s:%s",
2803 ata_mode_string(xfer_mask
),
2804 ata_mode_string(xfer_mask
& ATA_MASK_PIO
));
2806 snprintf(buf
, sizeof(buf
), "%s",
2807 ata_mode_string(xfer_mask
));
2809 ata_dev_printk(dev
, KERN_WARNING
,
2810 "limiting speed to %s\n", buf
);
2813 ata_unpack_xfermask(xfer_mask
, &dev
->pio_mask
, &dev
->mwdma_mask
,
2819 static int ata_dev_set_mode(struct ata_device
*dev
)
2821 struct ata_eh_context
*ehc
= &dev
->link
->eh_context
;
2822 unsigned int err_mask
;
2825 dev
->flags
&= ~ATA_DFLAG_PIO
;
2826 if (dev
->xfer_shift
== ATA_SHIFT_PIO
)
2827 dev
->flags
|= ATA_DFLAG_PIO
;
2829 err_mask
= ata_dev_set_xfermode(dev
);
2830 /* Old CFA may refuse this command, which is just fine */
2831 if (dev
->xfer_shift
== ATA_SHIFT_PIO
&& ata_id_is_cfa(dev
->id
))
2832 err_mask
&= ~AC_ERR_DEV
;
2833 /* Some very old devices and some bad newer ones fail any kind of
2834 SET_XFERMODE request but support PIO0-2 timings and no IORDY */
2835 if (dev
->xfer_shift
== ATA_SHIFT_PIO
&& !ata_id_has_iordy(dev
->id
) &&
2836 dev
->pio_mode
<= XFER_PIO_2
)
2837 err_mask
&= ~AC_ERR_DEV
;
2839 ata_dev_printk(dev
, KERN_ERR
, "failed to set xfermode "
2840 "(err_mask=0x%x)\n", err_mask
);
2844 ehc
->i
.flags
|= ATA_EHI_POST_SETMODE
;
2845 rc
= ata_dev_revalidate(dev
, 0);
2846 ehc
->i
.flags
&= ~ATA_EHI_POST_SETMODE
;
2850 DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
2851 dev
->xfer_shift
, (int)dev
->xfer_mode
);
2853 ata_dev_printk(dev
, KERN_INFO
, "configured for %s\n",
2854 ata_mode_string(ata_xfer_mode2mask(dev
->xfer_mode
)));
2859 * ata_do_set_mode - Program timings and issue SET FEATURES - XFER
2860 * @link: link on which timings will be programmed
2861 * @r_failed_dev: out paramter for failed device
2863 * Standard implementation of the function used to tune and set
2864 * ATA device disk transfer mode (PIO3, UDMA6, etc.). If
2865 * ata_dev_set_mode() fails, pointer to the failing device is
2866 * returned in @r_failed_dev.
2869 * PCI/etc. bus probe sem.
2872 * 0 on success, negative errno otherwise
2875 int ata_do_set_mode(struct ata_link
*link
, struct ata_device
**r_failed_dev
)
2877 struct ata_port
*ap
= link
->ap
;
2878 struct ata_device
*dev
;
2879 int rc
= 0, used_dma
= 0, found
= 0;
2881 /* step 1: calculate xfer_mask */
2882 ata_link_for_each_dev(dev
, link
) {
2883 unsigned int pio_mask
, dma_mask
;
2885 if (!ata_dev_enabled(dev
))
2888 ata_dev_xfermask(dev
);
2890 pio_mask
= ata_pack_xfermask(dev
->pio_mask
, 0, 0);
2891 dma_mask
= ata_pack_xfermask(0, dev
->mwdma_mask
, dev
->udma_mask
);
2892 dev
->pio_mode
= ata_xfer_mask2mode(pio_mask
);
2893 dev
->dma_mode
= ata_xfer_mask2mode(dma_mask
);
2902 /* step 2: always set host PIO timings */
2903 ata_link_for_each_dev(dev
, link
) {
2904 if (!ata_dev_enabled(dev
))
2907 if (!dev
->pio_mode
) {
2908 ata_dev_printk(dev
, KERN_WARNING
, "no PIO support\n");
2913 dev
->xfer_mode
= dev
->pio_mode
;
2914 dev
->xfer_shift
= ATA_SHIFT_PIO
;
2915 if (ap
->ops
->set_piomode
)
2916 ap
->ops
->set_piomode(ap
, dev
);
2919 /* step 3: set host DMA timings */
2920 ata_link_for_each_dev(dev
, link
) {
2921 if (!ata_dev_enabled(dev
) || !dev
->dma_mode
)
2924 dev
->xfer_mode
= dev
->dma_mode
;
2925 dev
->xfer_shift
= ata_xfer_mode2shift(dev
->dma_mode
);
2926 if (ap
->ops
->set_dmamode
)
2927 ap
->ops
->set_dmamode(ap
, dev
);
2930 /* step 4: update devices' xfer mode */
2931 ata_link_for_each_dev(dev
, link
) {
2932 /* don't update suspended devices' xfer mode */
2933 if (!ata_dev_enabled(dev
))
2936 rc
= ata_dev_set_mode(dev
);
2941 /* Record simplex status. If we selected DMA then the other
2942 * host channels are not permitted to do so.
2944 if (used_dma
&& (ap
->host
->flags
& ATA_HOST_SIMPLEX
))
2945 ap
->host
->simplex_claimed
= ap
;
2949 *r_failed_dev
= dev
;
2954 * ata_set_mode - Program timings and issue SET FEATURES - XFER
2955 * @link: link on which timings will be programmed
2956 * @r_failed_dev: out paramter for failed device
2958 * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
2959 * ata_set_mode() fails, pointer to the failing device is
2960 * returned in @r_failed_dev.
2963 * PCI/etc. bus probe sem.
2966 * 0 on success, negative errno otherwise
2968 int ata_set_mode(struct ata_link
*link
, struct ata_device
**r_failed_dev
)
2970 struct ata_port
*ap
= link
->ap
;
2972 /* has private set_mode? */
2973 if (ap
->ops
->set_mode
)
2974 return ap
->ops
->set_mode(link
, r_failed_dev
);
2975 return ata_do_set_mode(link
, r_failed_dev
);
2979 * ata_tf_to_host - issue ATA taskfile to host controller
2980 * @ap: port to which command is being issued
2981 * @tf: ATA taskfile register set
2983 * Issues ATA taskfile register set to ATA host controller,
2984 * with proper synchronization with interrupt handler and
2988 * spin_lock_irqsave(host lock)
2991 static inline void ata_tf_to_host(struct ata_port
*ap
,
2992 const struct ata_taskfile
*tf
)
2994 ap
->ops
->tf_load(ap
, tf
);
2995 ap
->ops
->exec_command(ap
, tf
);
2999 * ata_busy_sleep - sleep until BSY clears, or timeout
3000 * @ap: port containing status register to be polled
3001 * @tmout_pat: impatience timeout
3002 * @tmout: overall timeout
3004 * Sleep until ATA Status register bit BSY clears,
3005 * or a timeout occurs.
3008 * Kernel thread context (may sleep).
3011 * 0 on success, -errno otherwise.
3013 int ata_busy_sleep(struct ata_port
*ap
,
3014 unsigned long tmout_pat
, unsigned long tmout
)
3016 unsigned long timer_start
, timeout
;
3019 status
= ata_busy_wait(ap
, ATA_BUSY
, 300);
3020 timer_start
= jiffies
;
3021 timeout
= timer_start
+ tmout_pat
;
3022 while (status
!= 0xff && (status
& ATA_BUSY
) &&
3023 time_before(jiffies
, timeout
)) {
3025 status
= ata_busy_wait(ap
, ATA_BUSY
, 3);
3028 if (status
!= 0xff && (status
& ATA_BUSY
))
3029 ata_port_printk(ap
, KERN_WARNING
,
3030 "port is slow to respond, please be patient "
3031 "(Status 0x%x)\n", status
);
3033 timeout
= timer_start
+ tmout
;
3034 while (status
!= 0xff && (status
& ATA_BUSY
) &&
3035 time_before(jiffies
, timeout
)) {
3037 status
= ata_chk_status(ap
);
3043 if (status
& ATA_BUSY
) {
3044 ata_port_printk(ap
, KERN_ERR
, "port failed to respond "
3045 "(%lu secs, Status 0x%x)\n",
3046 tmout
/ HZ
, status
);
3054 * ata_wait_ready - sleep until BSY clears, or timeout
3055 * @ap: port containing status register to be polled
3056 * @deadline: deadline jiffies for the operation
3058 * Sleep until ATA Status register bit BSY clears, or timeout
3062 * Kernel thread context (may sleep).
3065 * 0 on success, -errno otherwise.
3067 int ata_wait_ready(struct ata_port
*ap
, unsigned long deadline
)
3069 unsigned long start
= jiffies
;
3073 u8 status
= ata_chk_status(ap
);
3074 unsigned long now
= jiffies
;
3076 if (!(status
& ATA_BUSY
))
3078 if (!ata_link_online(&ap
->link
) && status
== 0xff)
3080 if (time_after(now
, deadline
))
3083 if (!warned
&& time_after(now
, start
+ 5 * HZ
) &&
3084 (deadline
- now
> 3 * HZ
)) {
3085 ata_port_printk(ap
, KERN_WARNING
,
3086 "port is slow to respond, please be patient "
3087 "(Status 0x%x)\n", status
);
3095 static int ata_bus_post_reset(struct ata_port
*ap
, unsigned int devmask
,
3096 unsigned long deadline
)
3098 struct ata_ioports
*ioaddr
= &ap
->ioaddr
;
3099 unsigned int dev0
= devmask
& (1 << 0);
3100 unsigned int dev1
= devmask
& (1 << 1);
3103 /* if device 0 was found in ata_devchk, wait for its
3107 rc
= ata_wait_ready(ap
, deadline
);
3115 /* if device 1 was found in ata_devchk, wait for register
3116 * access briefly, then wait for BSY to clear.
3121 ap
->ops
->dev_select(ap
, 1);
3123 /* Wait for register access. Some ATAPI devices fail
3124 * to set nsect/lbal after reset, so don't waste too
3125 * much time on it. We're gonna wait for !BSY anyway.
3127 for (i
= 0; i
< 2; i
++) {
3130 nsect
= ioread8(ioaddr
->nsect_addr
);
3131 lbal
= ioread8(ioaddr
->lbal_addr
);
3132 if ((nsect
== 1) && (lbal
== 1))
3134 msleep(50); /* give drive a breather */
3137 rc
= ata_wait_ready(ap
, deadline
);
3145 /* is all this really necessary? */
3146 ap
->ops
->dev_select(ap
, 0);
3148 ap
->ops
->dev_select(ap
, 1);
3150 ap
->ops
->dev_select(ap
, 0);
3155 static int ata_bus_softreset(struct ata_port
*ap
, unsigned int devmask
,
3156 unsigned long deadline
)
3158 struct ata_ioports
*ioaddr
= &ap
->ioaddr
;
3160 DPRINTK("ata%u: bus reset via SRST\n", ap
->print_id
);
3162 /* software reset. causes dev0 to be selected */
3163 iowrite8(ap
->ctl
, ioaddr
->ctl_addr
);
3164 udelay(20); /* FIXME: flush */
3165 iowrite8(ap
->ctl
| ATA_SRST
, ioaddr
->ctl_addr
);
3166 udelay(20); /* FIXME: flush */
3167 iowrite8(ap
->ctl
, ioaddr
->ctl_addr
);
3169 /* spec mandates ">= 2ms" before checking status.
3170 * We wait 150ms, because that was the magic delay used for
3171 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
3172 * between when the ATA command register is written, and then
3173 * status is checked. Because waiting for "a while" before
3174 * checking status is fine, post SRST, we perform this magic
3175 * delay here as well.
3177 * Old drivers/ide uses the 2mS rule and then waits for ready
3181 /* Before we perform post reset processing we want to see if
3182 * the bus shows 0xFF because the odd clown forgets the D7
3183 * pulldown resistor.
3185 if (ata_check_status(ap
) == 0xFF)
3188 return ata_bus_post_reset(ap
, devmask
, deadline
);
3192 * ata_bus_reset - reset host port and associated ATA channel
3193 * @ap: port to reset
3195 * This is typically the first time we actually start issuing
3196 * commands to the ATA channel. We wait for BSY to clear, then
3197 * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
3198 * result. Determine what devices, if any, are on the channel
3199 * by looking at the device 0/1 error register. Look at the signature
3200 * stored in each device's taskfile registers, to determine if
3201 * the device is ATA or ATAPI.
3204 * PCI/etc. bus probe sem.
3205 * Obtains host lock.
3208 * Sets ATA_FLAG_DISABLED if bus reset fails.
3211 void ata_bus_reset(struct ata_port
*ap
)
3213 struct ata_device
*device
= ap
->link
.device
;
3214 struct ata_ioports
*ioaddr
= &ap
->ioaddr
;
3215 unsigned int slave_possible
= ap
->flags
& ATA_FLAG_SLAVE_POSS
;
3217 unsigned int dev0
, dev1
= 0, devmask
= 0;
3220 DPRINTK("ENTER, host %u, port %u\n", ap
->print_id
, ap
->port_no
);
3222 /* determine if device 0/1 are present */
3223 if (ap
->flags
& ATA_FLAG_SATA_RESET
)
3226 dev0
= ata_devchk(ap
, 0);
3228 dev1
= ata_devchk(ap
, 1);
3232 devmask
|= (1 << 0);
3234 devmask
|= (1 << 1);
3236 /* select device 0 again */
3237 ap
->ops
->dev_select(ap
, 0);
3239 /* issue bus reset */
3240 if (ap
->flags
& ATA_FLAG_SRST
) {
3241 rc
= ata_bus_softreset(ap
, devmask
, jiffies
+ 40 * HZ
);
3242 if (rc
&& rc
!= -ENODEV
)
3247 * determine by signature whether we have ATA or ATAPI devices
3249 device
[0].class = ata_dev_try_classify(&device
[0], dev0
, &err
);
3250 if ((slave_possible
) && (err
!= 0x81))
3251 device
[1].class = ata_dev_try_classify(&device
[1], dev1
, &err
);
3253 /* is double-select really necessary? */
3254 if (device
[1].class != ATA_DEV_NONE
)
3255 ap
->ops
->dev_select(ap
, 1);
3256 if (device
[0].class != ATA_DEV_NONE
)
3257 ap
->ops
->dev_select(ap
, 0);
3259 /* if no devices were detected, disable this port */
3260 if ((device
[0].class == ATA_DEV_NONE
) &&
3261 (device
[1].class == ATA_DEV_NONE
))
3264 if (ap
->flags
& (ATA_FLAG_SATA_RESET
| ATA_FLAG_SRST
)) {
3265 /* set up device control for ATA_FLAG_SATA_RESET */
3266 iowrite8(ap
->ctl
, ioaddr
->ctl_addr
);
3273 ata_port_printk(ap
, KERN_ERR
, "disabling port\n");
3274 ata_port_disable(ap
);
3280 * sata_link_debounce - debounce SATA phy status
3281 * @link: ATA link to debounce SATA phy status for
3282 * @params: timing parameters { interval, duratinon, timeout } in msec
3283 * @deadline: deadline jiffies for the operation
3285 * Make sure SStatus of @link reaches stable state, determined by
3286 * holding the same value where DET is not 1 for @duration polled
3287 * every @interval, before @timeout. Timeout constraints the
3288 * beginning of the stable state. Because DET gets stuck at 1 on
3289 * some controllers after hot unplugging, this functions waits
3290 * until timeout then returns 0 if DET is stable at 1.
3292 * @timeout is further limited by @deadline. The sooner of the
3296 * Kernel thread context (may sleep)
3299 * 0 on success, -errno on failure.
3301 int sata_link_debounce(struct ata_link
*link
, const unsigned long *params
,
3302 unsigned long deadline
)
3304 unsigned long interval_msec
= params
[0];
3305 unsigned long duration
= msecs_to_jiffies(params
[1]);
3306 unsigned long last_jiffies
, t
;
3310 t
= jiffies
+ msecs_to_jiffies(params
[2]);
3311 if (time_before(t
, deadline
))
3314 if ((rc
= sata_scr_read(link
, SCR_STATUS
, &cur
)))
3319 last_jiffies
= jiffies
;
3322 msleep(interval_msec
);
3323 if ((rc
= sata_scr_read(link
, SCR_STATUS
, &cur
)))
3329 if (cur
== 1 && time_before(jiffies
, deadline
))
3331 if (time_after(jiffies
, last_jiffies
+ duration
))
3336 /* unstable, start over */
3338 last_jiffies
= jiffies
;
3340 /* Check deadline. If debouncing failed, return
3341 * -EPIPE to tell upper layer to lower link speed.
3343 if (time_after(jiffies
, deadline
))
3349 * sata_link_resume - resume SATA link
3350 * @link: ATA link to resume SATA
3351 * @params: timing parameters { interval, duratinon, timeout } in msec
3352 * @deadline: deadline jiffies for the operation
3354 * Resume SATA phy @link and debounce it.
3357 * Kernel thread context (may sleep)
3360 * 0 on success, -errno on failure.
3362 int sata_link_resume(struct ata_link
*link
, const unsigned long *params
,
3363 unsigned long deadline
)
3368 if ((rc
= sata_scr_read(link
, SCR_CONTROL
, &scontrol
)))
3371 scontrol
= (scontrol
& 0x0f0) | 0x300;
3373 if ((rc
= sata_scr_write(link
, SCR_CONTROL
, scontrol
)))
3376 /* Some PHYs react badly if SStatus is pounded immediately
3377 * after resuming. Delay 200ms before debouncing.
3381 return sata_link_debounce(link
, params
, deadline
);
3385 * ata_std_prereset - prepare for reset
3386 * @link: ATA link to be reset
3387 * @deadline: deadline jiffies for the operation
3389 * @link is about to be reset. Initialize it. Failure from
3390 * prereset makes libata abort whole reset sequence and give up
3391 * that port, so prereset should be best-effort. It does its
3392 * best to prepare for reset sequence but if things go wrong, it
3393 * should just whine, not fail.
3396 * Kernel thread context (may sleep)
3399 * 0 on success, -errno otherwise.
3401 int ata_std_prereset(struct ata_link
*link
, unsigned long deadline
)
3403 struct ata_port
*ap
= link
->ap
;
3404 struct ata_eh_context
*ehc
= &link
->eh_context
;
3405 const unsigned long *timing
= sata_ehc_deb_timing(ehc
);
3408 /* handle link resume */
3409 if ((ehc
->i
.flags
& ATA_EHI_RESUME_LINK
) &&
3410 (link
->flags
& ATA_LFLAG_HRST_TO_RESUME
))
3411 ehc
->i
.action
|= ATA_EH_HARDRESET
;
3413 /* if we're about to do hardreset, nothing more to do */
3414 if (ehc
->i
.action
& ATA_EH_HARDRESET
)
3417 /* if SATA, resume link */
3418 if (ap
->flags
& ATA_FLAG_SATA
) {
3419 rc
= sata_link_resume(link
, timing
, deadline
);
3420 /* whine about phy resume failure but proceed */
3421 if (rc
&& rc
!= -EOPNOTSUPP
)
3422 ata_link_printk(link
, KERN_WARNING
, "failed to resume "
3423 "link for reset (errno=%d)\n", rc
);
3426 /* Wait for !BSY if the controller can wait for the first D2H
3427 * Reg FIS and we don't know that no device is attached.
3429 if (!(link
->flags
& ATA_LFLAG_SKIP_D2H_BSY
) && !ata_link_offline(link
)) {
3430 rc
= ata_wait_ready(ap
, deadline
);
3431 if (rc
&& rc
!= -ENODEV
) {
3432 ata_link_printk(link
, KERN_WARNING
, "device not ready "
3433 "(errno=%d), forcing hardreset\n", rc
);
3434 ehc
->i
.action
|= ATA_EH_HARDRESET
;
3442 * ata_std_softreset - reset host port via ATA SRST
3443 * @link: ATA link to reset
3444 * @classes: resulting classes of attached devices
3445 * @deadline: deadline jiffies for the operation
3447 * Reset host port using ATA SRST.
3450 * Kernel thread context (may sleep)
3453 * 0 on success, -errno otherwise.
3455 int ata_std_softreset(struct ata_link
*link
, unsigned int *classes
,
3456 unsigned long deadline
)
3458 struct ata_port
*ap
= link
->ap
;
3459 unsigned int slave_possible
= ap
->flags
& ATA_FLAG_SLAVE_POSS
;
3460 unsigned int devmask
= 0;
3466 if (ata_link_offline(link
)) {
3467 classes
[0] = ATA_DEV_NONE
;
3471 /* determine if device 0/1 are present */
3472 if (ata_devchk(ap
, 0))
3473 devmask
|= (1 << 0);
3474 if (slave_possible
&& ata_devchk(ap
, 1))
3475 devmask
|= (1 << 1);
3477 /* select device 0 again */
3478 ap
->ops
->dev_select(ap
, 0);
3480 /* issue bus reset */
3481 DPRINTK("about to softreset, devmask=%x\n", devmask
);
3482 rc
= ata_bus_softreset(ap
, devmask
, deadline
);
3483 /* if link is occupied, -ENODEV too is an error */
3484 if (rc
&& (rc
!= -ENODEV
|| sata_scr_valid(link
))) {
3485 ata_link_printk(link
, KERN_ERR
, "SRST failed (errno=%d)\n", rc
);
3489 /* determine by signature whether we have ATA or ATAPI devices */
3490 classes
[0] = ata_dev_try_classify(&link
->device
[0],
3491 devmask
& (1 << 0), &err
);
3492 if (slave_possible
&& err
!= 0x81)
3493 classes
[1] = ata_dev_try_classify(&link
->device
[1],
3494 devmask
& (1 << 1), &err
);
3497 DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes
[0], classes
[1]);
3502 * sata_link_hardreset - reset link via SATA phy reset
3503 * @link: link to reset
3504 * @timing: timing parameters { interval, duratinon, timeout } in msec
3505 * @deadline: deadline jiffies for the operation
3507 * SATA phy-reset @link using DET bits of SControl register.
3510 * Kernel thread context (may sleep)
3513 * 0 on success, -errno otherwise.
3515 int sata_link_hardreset(struct ata_link
*link
, const unsigned long *timing
,
3516 unsigned long deadline
)
3523 if (sata_set_spd_needed(link
)) {
3524 /* SATA spec says nothing about how to reconfigure
3525 * spd. To be on the safe side, turn off phy during
3526 * reconfiguration. This works for at least ICH7 AHCI
3529 if ((rc
= sata_scr_read(link
, SCR_CONTROL
, &scontrol
)))
3532 scontrol
= (scontrol
& 0x0f0) | 0x304;
3534 if ((rc
= sata_scr_write(link
, SCR_CONTROL
, scontrol
)))
3540 /* issue phy wake/reset */
3541 if ((rc
= sata_scr_read(link
, SCR_CONTROL
, &scontrol
)))
3544 scontrol
= (scontrol
& 0x0f0) | 0x301;
3546 if ((rc
= sata_scr_write_flush(link
, SCR_CONTROL
, scontrol
)))
3549 /* Couldn't find anything in SATA I/II specs, but AHCI-1.1
3550 * 10.4.2 says at least 1 ms.
3554 /* bring link back */
3555 rc
= sata_link_resume(link
, timing
, deadline
);
3557 DPRINTK("EXIT, rc=%d\n", rc
);
3562 * sata_std_hardreset - reset host port via SATA phy reset
3563 * @link: link to reset
3564 * @class: resulting class of attached device
3565 * @deadline: deadline jiffies for the operation
3567 * SATA phy-reset host port using DET bits of SControl register,
3568 * wait for !BSY and classify the attached device.
3571 * Kernel thread context (may sleep)
3574 * 0 on success, -errno otherwise.
3576 int sata_std_hardreset(struct ata_link
*link
, unsigned int *class,
3577 unsigned long deadline
)
3579 struct ata_port
*ap
= link
->ap
;
3580 const unsigned long *timing
= sata_ehc_deb_timing(&link
->eh_context
);
3586 rc
= sata_link_hardreset(link
, timing
, deadline
);
3588 ata_link_printk(link
, KERN_ERR
,
3589 "COMRESET failed (errno=%d)\n", rc
);
3593 /* TODO: phy layer with polling, timeouts, etc. */
3594 if (ata_link_offline(link
)) {
3595 *class = ATA_DEV_NONE
;
3596 DPRINTK("EXIT, link offline\n");
3600 /* wait a while before checking status, see SRST for more info */
3603 rc
= ata_wait_ready(ap
, deadline
);
3604 /* link occupied, -ENODEV too is an error */
3606 ata_link_printk(link
, KERN_ERR
,
3607 "COMRESET failed (errno=%d)\n", rc
);
3611 ap
->ops
->dev_select(ap
, 0); /* probably unnecessary */
3613 *class = ata_dev_try_classify(link
->device
, 1, NULL
);
3615 DPRINTK("EXIT, class=%u\n", *class);
3620 * ata_std_postreset - standard postreset callback
3621 * @link: the target ata_link
3622 * @classes: classes of attached devices
3624 * This function is invoked after a successful reset. Note that
3625 * the device might have been reset more than once using
3626 * different reset methods before postreset is invoked.
3629 * Kernel thread context (may sleep)
3631 void ata_std_postreset(struct ata_link
*link
, unsigned int *classes
)
3633 struct ata_port
*ap
= link
->ap
;
3638 /* print link status */
3639 sata_print_link_status(link
);
3642 if (sata_scr_read(link
, SCR_ERROR
, &serror
) == 0)
3643 sata_scr_write(link
, SCR_ERROR
, serror
);
3645 /* is double-select really necessary? */
3646 if (classes
[0] != ATA_DEV_NONE
)
3647 ap
->ops
->dev_select(ap
, 1);
3648 if (classes
[1] != ATA_DEV_NONE
)
3649 ap
->ops
->dev_select(ap
, 0);
3651 /* bail out if no device is present */
3652 if (classes
[0] == ATA_DEV_NONE
&& classes
[1] == ATA_DEV_NONE
) {
3653 DPRINTK("EXIT, no device\n");
3657 /* set up device control */
3658 if (ap
->ioaddr
.ctl_addr
)
3659 iowrite8(ap
->ctl
, ap
->ioaddr
.ctl_addr
);
3665 * ata_dev_same_device - Determine whether new ID matches configured device
3666 * @dev: device to compare against
3667 * @new_class: class of the new device
3668 * @new_id: IDENTIFY page of the new device
3670 * Compare @new_class and @new_id against @dev and determine
3671 * whether @dev is the device indicated by @new_class and
3678 * 1 if @dev matches @new_class and @new_id, 0 otherwise.
3680 static int ata_dev_same_device(struct ata_device
*dev
, unsigned int new_class
,
3683 const u16
*old_id
= dev
->id
;
3684 unsigned char model
[2][ATA_ID_PROD_LEN
+ 1];
3685 unsigned char serial
[2][ATA_ID_SERNO_LEN
+ 1];
3687 if (dev
->class != new_class
) {
3688 ata_dev_printk(dev
, KERN_INFO
, "class mismatch %d != %d\n",
3689 dev
->class, new_class
);
3693 ata_id_c_string(old_id
, model
[0], ATA_ID_PROD
, sizeof(model
[0]));
3694 ata_id_c_string(new_id
, model
[1], ATA_ID_PROD
, sizeof(model
[1]));
3695 ata_id_c_string(old_id
, serial
[0], ATA_ID_SERNO
, sizeof(serial
[0]));
3696 ata_id_c_string(new_id
, serial
[1], ATA_ID_SERNO
, sizeof(serial
[1]));
3698 if (strcmp(model
[0], model
[1])) {
3699 ata_dev_printk(dev
, KERN_INFO
, "model number mismatch "
3700 "'%s' != '%s'\n", model
[0], model
[1]);
3704 if (strcmp(serial
[0], serial
[1])) {
3705 ata_dev_printk(dev
, KERN_INFO
, "serial number mismatch "
3706 "'%s' != '%s'\n", serial
[0], serial
[1]);
3714 * ata_dev_reread_id - Re-read IDENTIFY data
3715 * @dev: target ATA device
3716 * @readid_flags: read ID flags
3718 * Re-read IDENTIFY page and make sure @dev is still attached to
3722 * Kernel thread context (may sleep)
3725 * 0 on success, negative errno otherwise
3727 int ata_dev_reread_id(struct ata_device
*dev
, unsigned int readid_flags
)
3729 unsigned int class = dev
->class;
3730 u16
*id
= (void *)dev
->link
->ap
->sector_buf
;
3734 rc
= ata_dev_read_id(dev
, &class, readid_flags
, id
);
3738 /* is the device still there? */
3739 if (!ata_dev_same_device(dev
, class, id
))
3742 memcpy(dev
->id
, id
, sizeof(id
[0]) * ATA_ID_WORDS
);
3747 * ata_dev_revalidate - Revalidate ATA device
3748 * @dev: device to revalidate
3749 * @readid_flags: read ID flags
3751 * Re-read IDENTIFY page, make sure @dev is still attached to the
3752 * port and reconfigure it according to the new IDENTIFY page.
3755 * Kernel thread context (may sleep)
3758 * 0 on success, negative errno otherwise
3760 int ata_dev_revalidate(struct ata_device
*dev
, unsigned int readid_flags
)
3762 u64 n_sectors
= dev
->n_sectors
;
3765 if (!ata_dev_enabled(dev
))
3769 rc
= ata_dev_reread_id(dev
, readid_flags
);
3773 /* configure device according to the new ID */
3774 rc
= ata_dev_configure(dev
);
3778 /* verify n_sectors hasn't changed */
3779 if (dev
->class == ATA_DEV_ATA
&& n_sectors
&&
3780 dev
->n_sectors
!= n_sectors
) {
3781 ata_dev_printk(dev
, KERN_INFO
, "n_sectors mismatch "
3783 (unsigned long long)n_sectors
,
3784 (unsigned long long)dev
->n_sectors
);
3786 /* restore original n_sectors */
3787 dev
->n_sectors
= n_sectors
;
3796 ata_dev_printk(dev
, KERN_ERR
, "revalidation failed (errno=%d)\n", rc
);
3800 struct ata_blacklist_entry
{
3801 const char *model_num
;
3802 const char *model_rev
;
3803 unsigned long horkage
;
3806 static const struct ata_blacklist_entry ata_device_blacklist
[] = {
3807 /* Devices with DMA related problems under Linux */
3808 { "WDC AC11000H", NULL
, ATA_HORKAGE_NODMA
},
3809 { "WDC AC22100H", NULL
, ATA_HORKAGE_NODMA
},
3810 { "WDC AC32500H", NULL
, ATA_HORKAGE_NODMA
},
3811 { "WDC AC33100H", NULL
, ATA_HORKAGE_NODMA
},
3812 { "WDC AC31600H", NULL
, ATA_HORKAGE_NODMA
},
3813 { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA
},
3814 { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA
},
3815 { "Compaq CRD-8241B", NULL
, ATA_HORKAGE_NODMA
},
3816 { "CRD-8400B", NULL
, ATA_HORKAGE_NODMA
},
3817 { "CRD-8480B", NULL
, ATA_HORKAGE_NODMA
},
3818 { "CRD-8482B", NULL
, ATA_HORKAGE_NODMA
},
3819 { "CRD-84", NULL
, ATA_HORKAGE_NODMA
},
3820 { "SanDisk SDP3B", NULL
, ATA_HORKAGE_NODMA
},
3821 { "SanDisk SDP3B-64", NULL
, ATA_HORKAGE_NODMA
},
3822 { "SANYO CD-ROM CRD", NULL
, ATA_HORKAGE_NODMA
},
3823 { "HITACHI CDR-8", NULL
, ATA_HORKAGE_NODMA
},
3824 { "HITACHI CDR-8335", NULL
, ATA_HORKAGE_NODMA
},
3825 { "HITACHI CDR-8435", NULL
, ATA_HORKAGE_NODMA
},
3826 { "Toshiba CD-ROM XM-6202B", NULL
, ATA_HORKAGE_NODMA
},
3827 { "TOSHIBA CD-ROM XM-1702BC", NULL
, ATA_HORKAGE_NODMA
},
3828 { "CD-532E-A", NULL
, ATA_HORKAGE_NODMA
},
3829 { "E-IDE CD-ROM CR-840",NULL
, ATA_HORKAGE_NODMA
},
3830 { "CD-ROM Drive/F5A", NULL
, ATA_HORKAGE_NODMA
},
3831 { "WPI CDD-820", NULL
, ATA_HORKAGE_NODMA
},
3832 { "SAMSUNG CD-ROM SC-148C", NULL
, ATA_HORKAGE_NODMA
},
3833 { "SAMSUNG CD-ROM SC", NULL
, ATA_HORKAGE_NODMA
},
3834 { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL
,ATA_HORKAGE_NODMA
},
3835 { "_NEC DV5800A", NULL
, ATA_HORKAGE_NODMA
},
3836 { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA
},
3837 { "Seagate STT20000A", NULL
, ATA_HORKAGE_NODMA
},
3838 { "IOMEGA ZIP 250 ATAPI", NULL
, ATA_HORKAGE_NODMA
}, /* temporary fix */
3839 { "IOMEGA ZIP 250 ATAPI Floppy",
3840 NULL
, ATA_HORKAGE_NODMA
},
3842 /* Weird ATAPI devices */
3843 { "TORiSAN DVD-ROM DRD-N216", NULL
, ATA_HORKAGE_MAX_SEC_128
},
3845 /* Devices we expect to fail diagnostics */
3847 /* Devices where NCQ should be avoided */
3849 { "WDC WD740ADFD-00", NULL
, ATA_HORKAGE_NONCQ
},
3850 /* http://thread.gmane.org/gmane.linux.ide/14907 */
3851 { "FUJITSU MHT2060BH", NULL
, ATA_HORKAGE_NONCQ
},
3853 { "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ
},
3854 { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ
},
3855 { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
3856 ATA_HORKAGE_NONCQ
},
3858 /* Blacklist entries taken from Silicon Image 3124/3132
3859 Windows driver .inf file - also several Linux problem reports */
3860 { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ
, },
3861 { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ
, },
3862 { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ
, },
3863 /* Drives which do spurious command completion */
3864 { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ
, },
3865 { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ
, },
3866 { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ
, },
3867 { "WDC WD740ADFD-00NLR1", NULL
, ATA_HORKAGE_NONCQ
, },
3868 { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ
, },
3869 { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ
, },
3870 { "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ
, },
3871 { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ
, },
3873 /* devices which puke on READ_NATIVE_MAX */
3874 { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA
, },
3875 { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA
},
3876 { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA
},
3877 { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA
},
3883 int strn_pattern_cmp(const char *patt
, const char *name
, int wildchar
)
3889 * check for trailing wildcard: *\0
3891 p
= strchr(patt
, wildchar
);
3892 if (p
&& ((*(p
+ 1)) == 0))
3897 return strncmp(patt
, name
, len
);
3900 static unsigned long ata_dev_blacklisted(const struct ata_device
*dev
)
3902 unsigned char model_num
[ATA_ID_PROD_LEN
+ 1];
3903 unsigned char model_rev
[ATA_ID_FW_REV_LEN
+ 1];
3904 const struct ata_blacklist_entry
*ad
= ata_device_blacklist
;
3906 ata_id_c_string(dev
->id
, model_num
, ATA_ID_PROD
, sizeof(model_num
));
3907 ata_id_c_string(dev
->id
, model_rev
, ATA_ID_FW_REV
, sizeof(model_rev
));
3909 while (ad
->model_num
) {
3910 if (!strn_pattern_cmp(ad
->model_num
, model_num
, '*')) {
3911 if (ad
->model_rev
== NULL
)
3913 if (!strn_pattern_cmp(ad
->model_rev
, model_rev
, '*'))
3921 static int ata_dma_blacklisted(const struct ata_device
*dev
)
3923 /* We don't support polling DMA.
3924 * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
3925 * if the LLDD handles only interrupts in the HSM_ST_LAST state.
3927 if ((dev
->link
->ap
->flags
& ATA_FLAG_PIO_POLLING
) &&
3928 (dev
->flags
& ATA_DFLAG_CDB_INTR
))
3930 return (dev
->horkage
& ATA_HORKAGE_NODMA
) ? 1 : 0;
3934 * ata_dev_xfermask - Compute supported xfermask of the given device
3935 * @dev: Device to compute xfermask for
3937 * Compute supported xfermask of @dev and store it in
3938 * dev->*_mask. This function is responsible for applying all
3939 * known limits including host controller limits, device
3945 static void ata_dev_xfermask(struct ata_device
*dev
)
3947 struct ata_link
*link
= dev
->link
;
3948 struct ata_port
*ap
= link
->ap
;
3949 struct ata_host
*host
= ap
->host
;
3950 unsigned long xfer_mask
;
3952 /* controller modes available */
3953 xfer_mask
= ata_pack_xfermask(ap
->pio_mask
,
3954 ap
->mwdma_mask
, ap
->udma_mask
);
3956 /* drive modes available */
3957 xfer_mask
&= ata_pack_xfermask(dev
->pio_mask
,
3958 dev
->mwdma_mask
, dev
->udma_mask
);
3959 xfer_mask
&= ata_id_xfermask(dev
->id
);
3962 * CFA Advanced TrueIDE timings are not allowed on a shared
3965 if (ata_dev_pair(dev
)) {
3966 /* No PIO5 or PIO6 */
3967 xfer_mask
&= ~(0x03 << (ATA_SHIFT_PIO
+ 5));
3968 /* No MWDMA3 or MWDMA 4 */
3969 xfer_mask
&= ~(0x03 << (ATA_SHIFT_MWDMA
+ 3));
3972 if (ata_dma_blacklisted(dev
)) {
3973 xfer_mask
&= ~(ATA_MASK_MWDMA
| ATA_MASK_UDMA
);
3974 ata_dev_printk(dev
, KERN_WARNING
,
3975 "device is on DMA blacklist, disabling DMA\n");
3978 if ((host
->flags
& ATA_HOST_SIMPLEX
) &&
3979 host
->simplex_claimed
&& host
->simplex_claimed
!= ap
) {
3980 xfer_mask
&= ~(ATA_MASK_MWDMA
| ATA_MASK_UDMA
);
3981 ata_dev_printk(dev
, KERN_WARNING
, "simplex DMA is claimed by "
3982 "other device, disabling DMA\n");
3985 if (ap
->flags
& ATA_FLAG_NO_IORDY
)
3986 xfer_mask
&= ata_pio_mask_no_iordy(dev
);
3988 if (ap
->ops
->mode_filter
)
3989 xfer_mask
= ap
->ops
->mode_filter(dev
, xfer_mask
);
3991 /* Apply cable rule here. Don't apply it early because when
3992 * we handle hot plug the cable type can itself change.
3993 * Check this last so that we know if the transfer rate was
3994 * solely limited by the cable.
3995 * Unknown or 80 wire cables reported host side are checked
3996 * drive side as well. Cases where we know a 40wire cable
3997 * is used safely for 80 are not checked here.
3999 if (xfer_mask
& (0xF8 << ATA_SHIFT_UDMA
))
4000 /* UDMA/44 or higher would be available */
4001 if((ap
->cbl
== ATA_CBL_PATA40
) ||
4002 (ata_drive_40wire(dev
->id
) &&
4003 (ap
->cbl
== ATA_CBL_PATA_UNK
||
4004 ap
->cbl
== ATA_CBL_PATA80
))) {
4005 ata_dev_printk(dev
, KERN_WARNING
,
4006 "limited to UDMA/33 due to 40-wire cable\n");
4007 xfer_mask
&= ~(0xF8 << ATA_SHIFT_UDMA
);
4010 ata_unpack_xfermask(xfer_mask
, &dev
->pio_mask
,
4011 &dev
->mwdma_mask
, &dev
->udma_mask
);
4015 * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
4016 * @dev: Device to which command will be sent
4018 * Issue SET FEATURES - XFER MODE command to device @dev
4022 * PCI/etc. bus probe sem.
4025 * 0 on success, AC_ERR_* mask otherwise.
4028 static unsigned int ata_dev_set_xfermode(struct ata_device
*dev
)
4030 struct ata_taskfile tf
;
4031 unsigned int err_mask
;
4033 /* set up set-features taskfile */
4034 DPRINTK("set features - xfer mode\n");
4036 /* Some controllers and ATAPI devices show flaky interrupt
4037 * behavior after setting xfer mode. Use polling instead.
4039 ata_tf_init(dev
, &tf
);
4040 tf
.command
= ATA_CMD_SET_FEATURES
;
4041 tf
.feature
= SETFEATURES_XFER
;
4042 tf
.flags
|= ATA_TFLAG_ISADDR
| ATA_TFLAG_DEVICE
| ATA_TFLAG_POLLING
;
4043 tf
.protocol
= ATA_PROT_NODATA
;
4044 tf
.nsect
= dev
->xfer_mode
;
4046 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
4048 DPRINTK("EXIT, err_mask=%x\n", err_mask
);
4053 * ata_dev_set_AN - Issue SET FEATURES - SATA FEATURES
4054 * @dev: Device to which command will be sent
4055 * @enable: Whether to enable or disable the feature
4057 * Issue SET FEATURES - SATA FEATURES command to device @dev
4058 * on port @ap with sector count set to indicate Asynchronous
4059 * Notification feature
4062 * PCI/etc. bus probe sem.
4065 * 0 on success, AC_ERR_* mask otherwise.
4067 static unsigned int ata_dev_set_AN(struct ata_device
*dev
, u8 enable
)
4069 struct ata_taskfile tf
;
4070 unsigned int err_mask
;
4072 /* set up set-features taskfile */
4073 DPRINTK("set features - SATA features\n");
4075 ata_tf_init(dev
, &tf
);
4076 tf
.command
= ATA_CMD_SET_FEATURES
;
4077 tf
.feature
= enable
;
4078 tf
.flags
|= ATA_TFLAG_ISADDR
| ATA_TFLAG_DEVICE
;
4079 tf
.protocol
= ATA_PROT_NODATA
;
4082 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
4084 DPRINTK("EXIT, err_mask=%x\n", err_mask
);
4089 * ata_dev_init_params - Issue INIT DEV PARAMS command
4090 * @dev: Device to which command will be sent
4091 * @heads: Number of heads (taskfile parameter)
4092 * @sectors: Number of sectors (taskfile parameter)
4095 * Kernel thread context (may sleep)
4098 * 0 on success, AC_ERR_* mask otherwise.
4100 static unsigned int ata_dev_init_params(struct ata_device
*dev
,
4101 u16 heads
, u16 sectors
)
4103 struct ata_taskfile tf
;
4104 unsigned int err_mask
;
4106 /* Number of sectors per track 1-255. Number of heads 1-16 */
4107 if (sectors
< 1 || sectors
> 255 || heads
< 1 || heads
> 16)
4108 return AC_ERR_INVALID
;
4110 /* set up init dev params taskfile */
4111 DPRINTK("init dev params \n");
4113 ata_tf_init(dev
, &tf
);
4114 tf
.command
= ATA_CMD_INIT_DEV_PARAMS
;
4115 tf
.flags
|= ATA_TFLAG_ISADDR
| ATA_TFLAG_DEVICE
;
4116 tf
.protocol
= ATA_PROT_NODATA
;
4118 tf
.device
|= (heads
- 1) & 0x0f; /* max head = num. of heads - 1 */
4120 err_mask
= ata_exec_internal(dev
, &tf
, NULL
, DMA_NONE
, NULL
, 0);
4121 /* A clean abort indicates an original or just out of spec drive
4122 and we should continue as we issue the setup based on the
4123 drive reported working geometry */
4124 if (err_mask
== AC_ERR_DEV
&& (tf
.feature
& ATA_ABORTED
))
4127 DPRINTK("EXIT, err_mask=%x\n", err_mask
);
4132 * ata_sg_clean - Unmap DMA memory associated with command
4133 * @qc: Command containing DMA memory to be released
4135 * Unmap all mapped DMA memory associated with this command.
4138 * spin_lock_irqsave(host lock)
4140 void ata_sg_clean(struct ata_queued_cmd
*qc
)
4142 struct ata_port
*ap
= qc
->ap
;
4143 struct scatterlist
*sg
= qc
->__sg
;
4144 int dir
= qc
->dma_dir
;
4145 void *pad_buf
= NULL
;
4147 WARN_ON(!(qc
->flags
& ATA_QCFLAG_DMAMAP
));
4148 WARN_ON(sg
== NULL
);
4150 if (qc
->flags
& ATA_QCFLAG_SINGLE
)
4151 WARN_ON(qc
->n_elem
> 1);
4153 VPRINTK("unmapping %u sg elements\n", qc
->n_elem
);
4155 /* if we padded the buffer out to 32-bit bound, and data
4156 * xfer direction is from-device, we must copy from the
4157 * pad buffer back into the supplied buffer
4159 if (qc
->pad_len
&& !(qc
->tf
.flags
& ATA_TFLAG_WRITE
))
4160 pad_buf
= ap
->pad
+ (qc
->tag
* ATA_DMA_PAD_SZ
);
4162 if (qc
->flags
& ATA_QCFLAG_SG
) {
4164 dma_unmap_sg(ap
->dev
, sg
, qc
->n_elem
, dir
);
4165 /* restore last sg */
4166 sg
[qc
->orig_n_elem
- 1].length
+= qc
->pad_len
;
4168 struct scatterlist
*psg
= &qc
->pad_sgent
;
4169 void *addr
= kmap_atomic(psg
->page
, KM_IRQ0
);
4170 memcpy(addr
+ psg
->offset
, pad_buf
, qc
->pad_len
);
4171 kunmap_atomic(addr
, KM_IRQ0
);
4175 dma_unmap_single(ap
->dev
,
4176 sg_dma_address(&sg
[0]), sg_dma_len(&sg
[0]),
4179 sg
->length
+= qc
->pad_len
;
4181 memcpy(qc
->buf_virt
+ sg
->length
- qc
->pad_len
,
4182 pad_buf
, qc
->pad_len
);
4185 qc
->flags
&= ~ATA_QCFLAG_DMAMAP
;
4190 * ata_fill_sg - Fill PCI IDE PRD table
4191 * @qc: Metadata associated with taskfile to be transferred
4193 * Fill PCI IDE PRD (scatter-gather) table with segments
4194 * associated with the current disk command.
4197 * spin_lock_irqsave(host lock)
4200 static void ata_fill_sg(struct ata_queued_cmd
*qc
)
4202 struct ata_port
*ap
= qc
->ap
;
4203 struct scatterlist
*sg
;
4206 WARN_ON(qc
->__sg
== NULL
);
4207 WARN_ON(qc
->n_elem
== 0 && qc
->pad_len
== 0);
4210 ata_for_each_sg(sg
, qc
) {
4214 /* determine if physical DMA addr spans 64K boundary.
4215 * Note h/w doesn't support 64-bit, so we unconditionally
4216 * truncate dma_addr_t to u32.
4218 addr
= (u32
) sg_dma_address(sg
);
4219 sg_len
= sg_dma_len(sg
);
4222 offset
= addr
& 0xffff;
4224 if ((offset
+ sg_len
) > 0x10000)
4225 len
= 0x10000 - offset
;
4227 ap
->prd
[idx
].addr
= cpu_to_le32(addr
);
4228 ap
->prd
[idx
].flags_len
= cpu_to_le32(len
& 0xffff);
4229 VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx
, addr
, len
);
4238 ap
->prd
[idx
- 1].flags_len
|= cpu_to_le32(ATA_PRD_EOT
);
4242 * ata_fill_sg_dumb - Fill PCI IDE PRD table
4243 * @qc: Metadata associated with taskfile to be transferred
4245 * Fill PCI IDE PRD (scatter-gather) table with segments
4246 * associated with the current disk command. Perform the fill
4247 * so that we avoid writing any length 64K records for
4248 * controllers that don't follow the spec.
4251 * spin_lock_irqsave(host lock)
4254 static void ata_fill_sg_dumb(struct ata_queued_cmd
*qc
)
4256 struct ata_port
*ap
= qc
->ap
;
4257 struct scatterlist
*sg
;
4260 WARN_ON(qc
->__sg
== NULL
);
4261 WARN_ON(qc
->n_elem
== 0 && qc
->pad_len
== 0);
4264 ata_for_each_sg(sg
, qc
) {
4266 u32 sg_len
, len
, blen
;
4268 /* determine if physical DMA addr spans 64K boundary.
4269 * Note h/w doesn't support 64-bit, so we unconditionally
4270 * truncate dma_addr_t to u32.
4272 addr
= (u32
) sg_dma_address(sg
);
4273 sg_len
= sg_dma_len(sg
);
4276 offset
= addr
& 0xffff;
4278 if ((offset
+ sg_len
) > 0x10000)
4279 len
= 0x10000 - offset
;
4281 blen
= len
& 0xffff;
4282 ap
->prd
[idx
].addr
= cpu_to_le32(addr
);
4284 /* Some PATA chipsets like the CS5530 can't
4285 cope with 0x0000 meaning 64K as the spec says */
4286 ap
->prd
[idx
].flags_len
= cpu_to_le32(0x8000);
4288 ap
->prd
[++idx
].addr
= cpu_to_le32(addr
+ 0x8000);
4290 ap
->prd
[idx
].flags_len
= cpu_to_le32(blen
);
4291 VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx
, addr
, len
);
4300 ap
->prd
[idx
- 1].flags_len
|= cpu_to_le32(ATA_PRD_EOT
);
4304 * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
4305 * @qc: Metadata associated with taskfile to check
4307 * Allow low-level driver to filter ATA PACKET commands, returning
4308 * a status indicating whether or not it is OK to use DMA for the
4309 * supplied PACKET command.
4312 * spin_lock_irqsave(host lock)
4314 * RETURNS: 0 when ATAPI DMA can be used
4317 int ata_check_atapi_dma(struct ata_queued_cmd
*qc
)
4319 struct ata_port
*ap
= qc
->ap
;
4321 /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
4322 * few ATAPI devices choke on such DMA requests.
4324 if (unlikely(qc
->nbytes
& 15))
4327 if (ap
->ops
->check_atapi_dma
)
4328 return ap
->ops
->check_atapi_dma(qc
);
4334 * ata_qc_prep - Prepare taskfile for submission
4335 * @qc: Metadata associated with taskfile to be prepared
4337 * Prepare ATA taskfile for submission.
4340 * spin_lock_irqsave(host lock)
4342 void ata_qc_prep(struct ata_queued_cmd
*qc
)
4344 if (!(qc
->flags
& ATA_QCFLAG_DMAMAP
))
4351 * ata_dumb_qc_prep - Prepare taskfile for submission
4352 * @qc: Metadata associated with taskfile to be prepared
4354 * Prepare ATA taskfile for submission.
4357 * spin_lock_irqsave(host lock)
4359 void ata_dumb_qc_prep(struct ata_queued_cmd
*qc
)
4361 if (!(qc
->flags
& ATA_QCFLAG_DMAMAP
))
4364 ata_fill_sg_dumb(qc
);
4367 void ata_noop_qc_prep(struct ata_queued_cmd
*qc
) { }
4370 * ata_sg_init_one - Associate command with memory buffer
4371 * @qc: Command to be associated
4372 * @buf: Memory buffer
4373 * @buflen: Length of memory buffer, in bytes.
4375 * Initialize the data-related elements of queued_cmd @qc
4376 * to point to a single memory buffer, @buf of byte length @buflen.
4379 * spin_lock_irqsave(host lock)
4382 void ata_sg_init_one(struct ata_queued_cmd
*qc
, void *buf
, unsigned int buflen
)
4384 qc
->flags
|= ATA_QCFLAG_SINGLE
;
4386 qc
->__sg
= &qc
->sgent
;
4388 qc
->orig_n_elem
= 1;
4390 qc
->nbytes
= buflen
;
4392 sg_init_one(&qc
->sgent
, buf
, buflen
);
4396 * ata_sg_init - Associate command with scatter-gather table.
4397 * @qc: Command to be associated
4398 * @sg: Scatter-gather table.
4399 * @n_elem: Number of elements in s/g table.
4401 * Initialize the data-related elements of queued_cmd @qc
4402 * to point to a scatter-gather table @sg, containing @n_elem
4406 * spin_lock_irqsave(host lock)
4409 void ata_sg_init(struct ata_queued_cmd
*qc
, struct scatterlist
*sg
,
4410 unsigned int n_elem
)
4412 qc
->flags
|= ATA_QCFLAG_SG
;
4414 qc
->n_elem
= n_elem
;
4415 qc
->orig_n_elem
= n_elem
;
4419 * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
4420 * @qc: Command with memory buffer to be mapped.
4422 * DMA-map the memory buffer associated with queued_cmd @qc.
4425 * spin_lock_irqsave(host lock)
4428 * Zero on success, negative on error.
4431 static int ata_sg_setup_one(struct ata_queued_cmd
*qc
)
4433 struct ata_port
*ap
= qc
->ap
;
4434 int dir
= qc
->dma_dir
;
4435 struct scatterlist
*sg
= qc
->__sg
;
4436 dma_addr_t dma_address
;
4439 /* we must lengthen transfers to end on a 32-bit boundary */
4440 qc
->pad_len
= sg
->length
& 3;
4442 void *pad_buf
= ap
->pad
+ (qc
->tag
* ATA_DMA_PAD_SZ
);
4443 struct scatterlist
*psg
= &qc
->pad_sgent
;
4445 WARN_ON(qc
->dev
->class != ATA_DEV_ATAPI
);
4447 memset(pad_buf
, 0, ATA_DMA_PAD_SZ
);
4449 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
)
4450 memcpy(pad_buf
, qc
->buf_virt
+ sg
->length
- qc
->pad_len
,
4453 sg_dma_address(psg
) = ap
->pad_dma
+ (qc
->tag
* ATA_DMA_PAD_SZ
);
4454 sg_dma_len(psg
) = ATA_DMA_PAD_SZ
;
4456 sg
->length
-= qc
->pad_len
;
4457 if (sg
->length
== 0)
4460 DPRINTK("padding done, sg->length=%u pad_len=%u\n",
4461 sg
->length
, qc
->pad_len
);
4469 dma_address
= dma_map_single(ap
->dev
, qc
->buf_virt
,
4471 if (dma_mapping_error(dma_address
)) {
4473 sg
->length
+= qc
->pad_len
;
4477 sg_dma_address(sg
) = dma_address
;
4478 sg_dma_len(sg
) = sg
->length
;
4481 DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg
),
4482 qc
->tf
.flags
& ATA_TFLAG_WRITE
? "write" : "read");
4488 * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
4489 * @qc: Command with scatter-gather table to be mapped.
4491 * DMA-map the scatter-gather table associated with queued_cmd @qc.
4494 * spin_lock_irqsave(host lock)
4497 * Zero on success, negative on error.
4501 static int ata_sg_setup(struct ata_queued_cmd
*qc
)
4503 struct ata_port
*ap
= qc
->ap
;
4504 struct scatterlist
*sg
= qc
->__sg
;
4505 struct scatterlist
*lsg
= &sg
[qc
->n_elem
- 1];
4506 int n_elem
, pre_n_elem
, dir
, trim_sg
= 0;
4508 VPRINTK("ENTER, ata%u\n", ap
->print_id
);
4509 WARN_ON(!(qc
->flags
& ATA_QCFLAG_SG
));
4511 /* we must lengthen transfers to end on a 32-bit boundary */
4512 qc
->pad_len
= lsg
->length
& 3;
4514 void *pad_buf
= ap
->pad
+ (qc
->tag
* ATA_DMA_PAD_SZ
);
4515 struct scatterlist
*psg
= &qc
->pad_sgent
;
4516 unsigned int offset
;
4518 WARN_ON(qc
->dev
->class != ATA_DEV_ATAPI
);
4520 memset(pad_buf
, 0, ATA_DMA_PAD_SZ
);
4523 * psg->page/offset are used to copy to-be-written
4524 * data in this function or read data in ata_sg_clean.
4526 offset
= lsg
->offset
+ lsg
->length
- qc
->pad_len
;
4527 psg
->page
= nth_page(lsg
->page
, offset
>> PAGE_SHIFT
);
4528 psg
->offset
= offset_in_page(offset
);
4530 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
) {
4531 void *addr
= kmap_atomic(psg
->page
, KM_IRQ0
);
4532 memcpy(pad_buf
, addr
+ psg
->offset
, qc
->pad_len
);
4533 kunmap_atomic(addr
, KM_IRQ0
);
4536 sg_dma_address(psg
) = ap
->pad_dma
+ (qc
->tag
* ATA_DMA_PAD_SZ
);
4537 sg_dma_len(psg
) = ATA_DMA_PAD_SZ
;
4539 lsg
->length
-= qc
->pad_len
;
4540 if (lsg
->length
== 0)
4543 DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
4544 qc
->n_elem
- 1, lsg
->length
, qc
->pad_len
);
4547 pre_n_elem
= qc
->n_elem
;
4548 if (trim_sg
&& pre_n_elem
)
4557 n_elem
= dma_map_sg(ap
->dev
, sg
, pre_n_elem
, dir
);
4559 /* restore last sg */
4560 lsg
->length
+= qc
->pad_len
;
4564 DPRINTK("%d sg elements mapped\n", n_elem
);
4567 qc
->n_elem
= n_elem
;
4573 * swap_buf_le16 - swap halves of 16-bit words in place
4574 * @buf: Buffer to swap
4575 * @buf_words: Number of 16-bit words in buffer.
4577 * Swap halves of 16-bit words if needed to convert from
4578 * little-endian byte order to native cpu byte order, or
4582 * Inherited from caller.
4584 void swap_buf_le16(u16
*buf
, unsigned int buf_words
)
4589 for (i
= 0; i
< buf_words
; i
++)
4590 buf
[i
] = le16_to_cpu(buf
[i
]);
4591 #endif /* __BIG_ENDIAN */
4595 * ata_data_xfer - Transfer data by PIO
4596 * @adev: device to target
4598 * @buflen: buffer length
4599 * @write_data: read/write
4601 * Transfer data from/to the device data register by PIO.
4604 * Inherited from caller.
4606 void ata_data_xfer(struct ata_device
*adev
, unsigned char *buf
,
4607 unsigned int buflen
, int write_data
)
4609 struct ata_port
*ap
= adev
->link
->ap
;
4610 unsigned int words
= buflen
>> 1;
4612 /* Transfer multiple of 2 bytes */
4614 iowrite16_rep(ap
->ioaddr
.data_addr
, buf
, words
);
4616 ioread16_rep(ap
->ioaddr
.data_addr
, buf
, words
);
4618 /* Transfer trailing 1 byte, if any. */
4619 if (unlikely(buflen
& 0x01)) {
4620 u16 align_buf
[1] = { 0 };
4621 unsigned char *trailing_buf
= buf
+ buflen
- 1;
4624 memcpy(align_buf
, trailing_buf
, 1);
4625 iowrite16(le16_to_cpu(align_buf
[0]), ap
->ioaddr
.data_addr
);
4627 align_buf
[0] = cpu_to_le16(ioread16(ap
->ioaddr
.data_addr
));
4628 memcpy(trailing_buf
, align_buf
, 1);
4634 * ata_data_xfer_noirq - Transfer data by PIO
4635 * @adev: device to target
4637 * @buflen: buffer length
4638 * @write_data: read/write
4640 * Transfer data from/to the device data register by PIO. Do the
4641 * transfer with interrupts disabled.
4644 * Inherited from caller.
4646 void ata_data_xfer_noirq(struct ata_device
*adev
, unsigned char *buf
,
4647 unsigned int buflen
, int write_data
)
4649 unsigned long flags
;
4650 local_irq_save(flags
);
4651 ata_data_xfer(adev
, buf
, buflen
, write_data
);
4652 local_irq_restore(flags
);
4657 * ata_pio_sector - Transfer a sector of data.
4658 * @qc: Command on going
4660 * Transfer qc->sect_size bytes of data from/to the ATA device.
4663 * Inherited from caller.
4666 static void ata_pio_sector(struct ata_queued_cmd
*qc
)
4668 int do_write
= (qc
->tf
.flags
& ATA_TFLAG_WRITE
);
4669 struct scatterlist
*sg
= qc
->__sg
;
4670 struct ata_port
*ap
= qc
->ap
;
4672 unsigned int offset
;
4675 if (qc
->curbytes
== qc
->nbytes
- qc
->sect_size
)
4676 ap
->hsm_task_state
= HSM_ST_LAST
;
4678 page
= sg
[qc
->cursg
].page
;
4679 offset
= sg
[qc
->cursg
].offset
+ qc
->cursg_ofs
;
4681 /* get the current page and offset */
4682 page
= nth_page(page
, (offset
>> PAGE_SHIFT
));
4683 offset
%= PAGE_SIZE
;
4685 DPRINTK("data %s\n", qc
->tf
.flags
& ATA_TFLAG_WRITE
? "write" : "read");
4687 if (PageHighMem(page
)) {
4688 unsigned long flags
;
4690 /* FIXME: use a bounce buffer */
4691 local_irq_save(flags
);
4692 buf
= kmap_atomic(page
, KM_IRQ0
);
4694 /* do the actual data transfer */
4695 ap
->ops
->data_xfer(qc
->dev
, buf
+ offset
, qc
->sect_size
, do_write
);
4697 kunmap_atomic(buf
, KM_IRQ0
);
4698 local_irq_restore(flags
);
4700 buf
= page_address(page
);
4701 ap
->ops
->data_xfer(qc
->dev
, buf
+ offset
, qc
->sect_size
, do_write
);
4704 qc
->curbytes
+= qc
->sect_size
;
4705 qc
->cursg_ofs
+= qc
->sect_size
;
4707 if (qc
->cursg_ofs
== (&sg
[qc
->cursg
])->length
) {
4714 * ata_pio_sectors - Transfer one or many sectors.
4715 * @qc: Command on going
4717 * Transfer one or many sectors of data from/to the
4718 * ATA device for the DRQ request.
4721 * Inherited from caller.
4724 static void ata_pio_sectors(struct ata_queued_cmd
*qc
)
4726 if (is_multi_taskfile(&qc
->tf
)) {
4727 /* READ/WRITE MULTIPLE */
4730 WARN_ON(qc
->dev
->multi_count
== 0);
4732 nsect
= min((qc
->nbytes
- qc
->curbytes
) / qc
->sect_size
,
4733 qc
->dev
->multi_count
);
4739 ata_altstatus(qc
->ap
); /* flush */
4743 * atapi_send_cdb - Write CDB bytes to hardware
4744 * @ap: Port to which ATAPI device is attached.
4745 * @qc: Taskfile currently active
4747 * When device has indicated its readiness to accept
4748 * a CDB, this function is called. Send the CDB.
4754 static void atapi_send_cdb(struct ata_port
*ap
, struct ata_queued_cmd
*qc
)
4757 DPRINTK("send cdb\n");
4758 WARN_ON(qc
->dev
->cdb_len
< 12);
4760 ap
->ops
->data_xfer(qc
->dev
, qc
->cdb
, qc
->dev
->cdb_len
, 1);
4761 ata_altstatus(ap
); /* flush */
4763 switch (qc
->tf
.protocol
) {
4764 case ATA_PROT_ATAPI
:
4765 ap
->hsm_task_state
= HSM_ST
;
4767 case ATA_PROT_ATAPI_NODATA
:
4768 ap
->hsm_task_state
= HSM_ST_LAST
;
4770 case ATA_PROT_ATAPI_DMA
:
4771 ap
->hsm_task_state
= HSM_ST_LAST
;
4772 /* initiate bmdma */
4773 ap
->ops
->bmdma_start(qc
);
4779 * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
4780 * @qc: Command on going
4781 * @bytes: number of bytes
4783 * Transfer Transfer data from/to the ATAPI device.
4786 * Inherited from caller.
4790 static void __atapi_pio_bytes(struct ata_queued_cmd
*qc
, unsigned int bytes
)
4792 int do_write
= (qc
->tf
.flags
& ATA_TFLAG_WRITE
);
4793 struct scatterlist
*sg
= qc
->__sg
;
4794 struct ata_port
*ap
= qc
->ap
;
4797 unsigned int offset
, count
;
4799 if (qc
->curbytes
+ bytes
>= qc
->nbytes
)
4800 ap
->hsm_task_state
= HSM_ST_LAST
;
4803 if (unlikely(qc
->cursg
>= qc
->n_elem
)) {
4805 * The end of qc->sg is reached and the device expects
4806 * more data to transfer. In order not to overrun qc->sg
4807 * and fulfill length specified in the byte count register,
4808 * - for read case, discard trailing data from the device
4809 * - for write case, padding zero data to the device
4811 u16 pad_buf
[1] = { 0 };
4812 unsigned int words
= bytes
>> 1;
4815 if (words
) /* warning if bytes > 1 */
4816 ata_dev_printk(qc
->dev
, KERN_WARNING
,
4817 "%u bytes trailing data\n", bytes
);
4819 for (i
= 0; i
< words
; i
++)
4820 ap
->ops
->data_xfer(qc
->dev
, (unsigned char*)pad_buf
, 2, do_write
);
4822 ap
->hsm_task_state
= HSM_ST_LAST
;
4826 sg
= &qc
->__sg
[qc
->cursg
];
4829 offset
= sg
->offset
+ qc
->cursg_ofs
;
4831 /* get the current page and offset */
4832 page
= nth_page(page
, (offset
>> PAGE_SHIFT
));
4833 offset
%= PAGE_SIZE
;
4835 /* don't overrun current sg */
4836 count
= min(sg
->length
- qc
->cursg_ofs
, bytes
);
4838 /* don't cross page boundaries */
4839 count
= min(count
, (unsigned int)PAGE_SIZE
- offset
);
4841 DPRINTK("data %s\n", qc
->tf
.flags
& ATA_TFLAG_WRITE
? "write" : "read");
4843 if (PageHighMem(page
)) {
4844 unsigned long flags
;
4846 /* FIXME: use bounce buffer */
4847 local_irq_save(flags
);
4848 buf
= kmap_atomic(page
, KM_IRQ0
);
4850 /* do the actual data transfer */
4851 ap
->ops
->data_xfer(qc
->dev
, buf
+ offset
, count
, do_write
);
4853 kunmap_atomic(buf
, KM_IRQ0
);
4854 local_irq_restore(flags
);
4856 buf
= page_address(page
);
4857 ap
->ops
->data_xfer(qc
->dev
, buf
+ offset
, count
, do_write
);
4861 qc
->curbytes
+= count
;
4862 qc
->cursg_ofs
+= count
;
4864 if (qc
->cursg_ofs
== sg
->length
) {
4874 * atapi_pio_bytes - Transfer data from/to the ATAPI device.
4875 * @qc: Command on going
4877 * Transfer Transfer data from/to the ATAPI device.
4880 * Inherited from caller.
4883 static void atapi_pio_bytes(struct ata_queued_cmd
*qc
)
4885 struct ata_port
*ap
= qc
->ap
;
4886 struct ata_device
*dev
= qc
->dev
;
4887 unsigned int ireason
, bc_lo
, bc_hi
, bytes
;
4888 int i_write
, do_write
= (qc
->tf
.flags
& ATA_TFLAG_WRITE
) ? 1 : 0;
4890 /* Abuse qc->result_tf for temp storage of intermediate TF
4891 * here to save some kernel stack usage.
4892 * For normal completion, qc->result_tf is not relevant. For
4893 * error, qc->result_tf is later overwritten by ata_qc_complete().
4894 * So, the correctness of qc->result_tf is not affected.
4896 ap
->ops
->tf_read(ap
, &qc
->result_tf
);
4897 ireason
= qc
->result_tf
.nsect
;
4898 bc_lo
= qc
->result_tf
.lbam
;
4899 bc_hi
= qc
->result_tf
.lbah
;
4900 bytes
= (bc_hi
<< 8) | bc_lo
;
4902 /* shall be cleared to zero, indicating xfer of data */
4903 if (ireason
& (1 << 0))
4906 /* make sure transfer direction matches expected */
4907 i_write
= ((ireason
& (1 << 1)) == 0) ? 1 : 0;
4908 if (do_write
!= i_write
)
4911 VPRINTK("ata%u: xfering %d bytes\n", ap
->print_id
, bytes
);
4913 __atapi_pio_bytes(qc
, bytes
);
4914 ata_altstatus(ap
); /* flush */
4919 ata_dev_printk(dev
, KERN_INFO
, "ATAPI check failed\n");
4920 qc
->err_mask
|= AC_ERR_HSM
;
4921 ap
->hsm_task_state
= HSM_ST_ERR
;
4925 * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
4926 * @ap: the target ata_port
4930 * 1 if ok in workqueue, 0 otherwise.
4933 static inline int ata_hsm_ok_in_wq(struct ata_port
*ap
, struct ata_queued_cmd
*qc
)
4935 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
4938 if (ap
->hsm_task_state
== HSM_ST_FIRST
) {
4939 if (qc
->tf
.protocol
== ATA_PROT_PIO
&&
4940 (qc
->tf
.flags
& ATA_TFLAG_WRITE
))
4943 if (is_atapi_taskfile(&qc
->tf
) &&
4944 !(qc
->dev
->flags
& ATA_DFLAG_CDB_INTR
))
4952 * ata_hsm_qc_complete - finish a qc running on standard HSM
4953 * @qc: Command to complete
4954 * @in_wq: 1 if called from workqueue, 0 otherwise
4956 * Finish @qc which is running on standard HSM.
4959 * If @in_wq is zero, spin_lock_irqsave(host lock).
4960 * Otherwise, none on entry and grabs host lock.
4962 static void ata_hsm_qc_complete(struct ata_queued_cmd
*qc
, int in_wq
)
4964 struct ata_port
*ap
= qc
->ap
;
4965 unsigned long flags
;
4967 if (ap
->ops
->error_handler
) {
4969 spin_lock_irqsave(ap
->lock
, flags
);
4971 /* EH might have kicked in while host lock is
4974 qc
= ata_qc_from_tag(ap
, qc
->tag
);
4976 if (likely(!(qc
->err_mask
& AC_ERR_HSM
))) {
4977 ap
->ops
->irq_on(ap
);
4978 ata_qc_complete(qc
);
4980 ata_port_freeze(ap
);
4983 spin_unlock_irqrestore(ap
->lock
, flags
);
4985 if (likely(!(qc
->err_mask
& AC_ERR_HSM
)))
4986 ata_qc_complete(qc
);
4988 ata_port_freeze(ap
);
4992 spin_lock_irqsave(ap
->lock
, flags
);
4993 ap
->ops
->irq_on(ap
);
4994 ata_qc_complete(qc
);
4995 spin_unlock_irqrestore(ap
->lock
, flags
);
4997 ata_qc_complete(qc
);
5002 * ata_hsm_move - move the HSM to the next state.
5003 * @ap: the target ata_port
5005 * @status: current device status
5006 * @in_wq: 1 if called from workqueue, 0 otherwise
5009 * 1 when poll next status needed, 0 otherwise.
5011 int ata_hsm_move(struct ata_port
*ap
, struct ata_queued_cmd
*qc
,
5012 u8 status
, int in_wq
)
5014 unsigned long flags
= 0;
5017 WARN_ON((qc
->flags
& ATA_QCFLAG_ACTIVE
) == 0);
5019 /* Make sure ata_qc_issue_prot() does not throw things
5020 * like DMA polling into the workqueue. Notice that
5021 * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
5023 WARN_ON(in_wq
!= ata_hsm_ok_in_wq(ap
, qc
));
5026 DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
5027 ap
->print_id
, qc
->tf
.protocol
, ap
->hsm_task_state
, status
);
5029 switch (ap
->hsm_task_state
) {
5031 /* Send first data block or PACKET CDB */
5033 /* If polling, we will stay in the work queue after
5034 * sending the data. Otherwise, interrupt handler
5035 * takes over after sending the data.
5037 poll_next
= (qc
->tf
.flags
& ATA_TFLAG_POLLING
);
5039 /* check device status */
5040 if (unlikely((status
& ATA_DRQ
) == 0)) {
5041 /* handle BSY=0, DRQ=0 as error */
5042 if (likely(status
& (ATA_ERR
| ATA_DF
)))
5043 /* device stops HSM for abort/error */
5044 qc
->err_mask
|= AC_ERR_DEV
;
5046 /* HSM violation. Let EH handle this */
5047 qc
->err_mask
|= AC_ERR_HSM
;
5049 ap
->hsm_task_state
= HSM_ST_ERR
;
5053 /* Device should not ask for data transfer (DRQ=1)
5054 * when it finds something wrong.
5055 * We ignore DRQ here and stop the HSM by
5056 * changing hsm_task_state to HSM_ST_ERR and
5057 * let the EH abort the command or reset the device.
5059 if (unlikely(status
& (ATA_ERR
| ATA_DF
))) {
5060 ata_port_printk(ap
, KERN_WARNING
, "DRQ=1 with device "
5061 "error, dev_stat 0x%X\n", status
);
5062 qc
->err_mask
|= AC_ERR_HSM
;
5063 ap
->hsm_task_state
= HSM_ST_ERR
;
5067 /* Send the CDB (atapi) or the first data block (ata pio out).
5068 * During the state transition, interrupt handler shouldn't
5069 * be invoked before the data transfer is complete and
5070 * hsm_task_state is changed. Hence, the following locking.
5073 spin_lock_irqsave(ap
->lock
, flags
);
5075 if (qc
->tf
.protocol
== ATA_PROT_PIO
) {
5076 /* PIO data out protocol.
5077 * send first data block.
5080 /* ata_pio_sectors() might change the state
5081 * to HSM_ST_LAST. so, the state is changed here
5082 * before ata_pio_sectors().
5084 ap
->hsm_task_state
= HSM_ST
;
5085 ata_pio_sectors(qc
);
5088 atapi_send_cdb(ap
, qc
);
5091 spin_unlock_irqrestore(ap
->lock
, flags
);
5093 /* if polling, ata_pio_task() handles the rest.
5094 * otherwise, interrupt handler takes over from here.
5099 /* complete command or read/write the data register */
5100 if (qc
->tf
.protocol
== ATA_PROT_ATAPI
) {
5101 /* ATAPI PIO protocol */
5102 if ((status
& ATA_DRQ
) == 0) {
5103 /* No more data to transfer or device error.
5104 * Device error will be tagged in HSM_ST_LAST.
5106 ap
->hsm_task_state
= HSM_ST_LAST
;
5110 /* Device should not ask for data transfer (DRQ=1)
5111 * when it finds something wrong.
5112 * We ignore DRQ here and stop the HSM by
5113 * changing hsm_task_state to HSM_ST_ERR and
5114 * let the EH abort the command or reset the device.
5116 if (unlikely(status
& (ATA_ERR
| ATA_DF
))) {
5117 ata_port_printk(ap
, KERN_WARNING
, "DRQ=1 with "
5118 "device error, dev_stat 0x%X\n",
5120 qc
->err_mask
|= AC_ERR_HSM
;
5121 ap
->hsm_task_state
= HSM_ST_ERR
;
5125 atapi_pio_bytes(qc
);
5127 if (unlikely(ap
->hsm_task_state
== HSM_ST_ERR
))
5128 /* bad ireason reported by device */
5132 /* ATA PIO protocol */
5133 if (unlikely((status
& ATA_DRQ
) == 0)) {
5134 /* handle BSY=0, DRQ=0 as error */
5135 if (likely(status
& (ATA_ERR
| ATA_DF
)))
5136 /* device stops HSM for abort/error */
5137 qc
->err_mask
|= AC_ERR_DEV
;
5139 /* HSM violation. Let EH handle this.
5140 * Phantom devices also trigger this
5141 * condition. Mark hint.
5143 qc
->err_mask
|= AC_ERR_HSM
|
5146 ap
->hsm_task_state
= HSM_ST_ERR
;
5150 /* For PIO reads, some devices may ask for
5151 * data transfer (DRQ=1) alone with ERR=1.
5152 * We respect DRQ here and transfer one
5153 * block of junk data before changing the
5154 * hsm_task_state to HSM_ST_ERR.
5156 * For PIO writes, ERR=1 DRQ=1 doesn't make
5157 * sense since the data block has been
5158 * transferred to the device.
5160 if (unlikely(status
& (ATA_ERR
| ATA_DF
))) {
5161 /* data might be corrputed */
5162 qc
->err_mask
|= AC_ERR_DEV
;
5164 if (!(qc
->tf
.flags
& ATA_TFLAG_WRITE
)) {
5165 ata_pio_sectors(qc
);
5166 status
= ata_wait_idle(ap
);
5169 if (status
& (ATA_BUSY
| ATA_DRQ
))
5170 qc
->err_mask
|= AC_ERR_HSM
;
5172 /* ata_pio_sectors() might change the
5173 * state to HSM_ST_LAST. so, the state
5174 * is changed after ata_pio_sectors().
5176 ap
->hsm_task_state
= HSM_ST_ERR
;
5180 ata_pio_sectors(qc
);
5182 if (ap
->hsm_task_state
== HSM_ST_LAST
&&
5183 (!(qc
->tf
.flags
& ATA_TFLAG_WRITE
))) {
5185 status
= ata_wait_idle(ap
);
5194 if (unlikely(!ata_ok(status
))) {
5195 qc
->err_mask
|= __ac_err_mask(status
);
5196 ap
->hsm_task_state
= HSM_ST_ERR
;
5200 /* no more data to transfer */
5201 DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
5202 ap
->print_id
, qc
->dev
->devno
, status
);
5204 WARN_ON(qc
->err_mask
);
5206 ap
->hsm_task_state
= HSM_ST_IDLE
;
5208 /* complete taskfile transaction */
5209 ata_hsm_qc_complete(qc
, in_wq
);
5215 /* make sure qc->err_mask is available to
5216 * know what's wrong and recover
5218 WARN_ON(qc
->err_mask
== 0);
5220 ap
->hsm_task_state
= HSM_ST_IDLE
;
5222 /* complete taskfile transaction */
5223 ata_hsm_qc_complete(qc
, in_wq
);
5235 static void ata_pio_task(struct work_struct
*work
)
5237 struct ata_port
*ap
=
5238 container_of(work
, struct ata_port
, port_task
.work
);
5239 struct ata_queued_cmd
*qc
= ap
->port_task_data
;
5244 WARN_ON(ap
->hsm_task_state
== HSM_ST_IDLE
);
5247 * This is purely heuristic. This is a fast path.
5248 * Sometimes when we enter, BSY will be cleared in
5249 * a chk-status or two. If not, the drive is probably seeking
5250 * or something. Snooze for a couple msecs, then
5251 * chk-status again. If still busy, queue delayed work.
5253 status
= ata_busy_wait(ap
, ATA_BUSY
, 5);
5254 if (status
& ATA_BUSY
) {
5256 status
= ata_busy_wait(ap
, ATA_BUSY
, 10);
5257 if (status
& ATA_BUSY
) {
5258 ata_port_queue_task(ap
, ata_pio_task
, qc
, ATA_SHORT_PAUSE
);
5264 poll_next
= ata_hsm_move(ap
, qc
, status
, 1);
5266 /* another command or interrupt handler
5267 * may be running at this point.
5274 * ata_qc_new - Request an available ATA command, for queueing
5275 * @ap: Port associated with device @dev
5276 * @dev: Device from whom we request an available command structure
5282 static struct ata_queued_cmd
*ata_qc_new(struct ata_port
*ap
)
5284 struct ata_queued_cmd
*qc
= NULL
;
5287 /* no command while frozen */
5288 if (unlikely(ap
->pflags
& ATA_PFLAG_FROZEN
))
5291 /* the last tag is reserved for internal command. */
5292 for (i
= 0; i
< ATA_MAX_QUEUE
- 1; i
++)
5293 if (!test_and_set_bit(i
, &ap
->qc_allocated
)) {
5294 qc
= __ata_qc_from_tag(ap
, i
);
5305 * ata_qc_new_init - Request an available ATA command, and initialize it
5306 * @dev: Device from whom we request an available command structure
5312 struct ata_queued_cmd
*ata_qc_new_init(struct ata_device
*dev
)
5314 struct ata_port
*ap
= dev
->link
->ap
;
5315 struct ata_queued_cmd
*qc
;
5317 qc
= ata_qc_new(ap
);
5330 * ata_qc_free - free unused ata_queued_cmd
5331 * @qc: Command to complete
5333 * Designed to free unused ata_queued_cmd object
5334 * in case something prevents using it.
5337 * spin_lock_irqsave(host lock)
5339 void ata_qc_free(struct ata_queued_cmd
*qc
)
5341 struct ata_port
*ap
= qc
->ap
;
5344 WARN_ON(qc
== NULL
); /* ata_qc_from_tag _might_ return NULL */
5348 if (likely(ata_tag_valid(tag
))) {
5349 qc
->tag
= ATA_TAG_POISON
;
5350 clear_bit(tag
, &ap
->qc_allocated
);
5354 void __ata_qc_complete(struct ata_queued_cmd
*qc
)
5356 struct ata_port
*ap
= qc
->ap
;
5357 struct ata_link
*link
= qc
->dev
->link
;
5359 WARN_ON(qc
== NULL
); /* ata_qc_from_tag _might_ return NULL */
5360 WARN_ON(!(qc
->flags
& ATA_QCFLAG_ACTIVE
));
5362 if (likely(qc
->flags
& ATA_QCFLAG_DMAMAP
))
5365 /* command should be marked inactive atomically with qc completion */
5366 if (qc
->tf
.protocol
== ATA_PROT_NCQ
)
5367 link
->sactive
&= ~(1 << qc
->tag
);
5369 link
->active_tag
= ATA_TAG_POISON
;
5371 /* atapi: mark qc as inactive to prevent the interrupt handler
5372 * from completing the command twice later, before the error handler
5373 * is called. (when rc != 0 and atapi request sense is needed)
5375 qc
->flags
&= ~ATA_QCFLAG_ACTIVE
;
5376 ap
->qc_active
&= ~(1 << qc
->tag
);
5378 /* call completion callback */
5379 qc
->complete_fn(qc
);
5382 static void fill_result_tf(struct ata_queued_cmd
*qc
)
5384 struct ata_port
*ap
= qc
->ap
;
5386 qc
->result_tf
.flags
= qc
->tf
.flags
;
5387 ap
->ops
->tf_read(ap
, &qc
->result_tf
);
5391 * ata_qc_complete - Complete an active ATA command
5392 * @qc: Command to complete
5393 * @err_mask: ATA Status register contents
5395 * Indicate to the mid and upper layers that an ATA
5396 * command has completed, with either an ok or not-ok status.
5399 * spin_lock_irqsave(host lock)
5401 void ata_qc_complete(struct ata_queued_cmd
*qc
)
5403 struct ata_port
*ap
= qc
->ap
;
5405 /* XXX: New EH and old EH use different mechanisms to
5406 * synchronize EH with regular execution path.
5408 * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED.
5409 * Normal execution path is responsible for not accessing a
5410 * failed qc. libata core enforces the rule by returning NULL
5411 * from ata_qc_from_tag() for failed qcs.
5413 * Old EH depends on ata_qc_complete() nullifying completion
5414 * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does
5415 * not synchronize with interrupt handler. Only PIO task is
5418 if (ap
->ops
->error_handler
) {
5419 WARN_ON(ap
->pflags
& ATA_PFLAG_FROZEN
);
5421 if (unlikely(qc
->err_mask
))
5422 qc
->flags
|= ATA_QCFLAG_FAILED
;
5424 if (unlikely(qc
->flags
& ATA_QCFLAG_FAILED
)) {
5425 if (!ata_tag_internal(qc
->tag
)) {
5426 /* always fill result TF for failed qc */
5428 ata_qc_schedule_eh(qc
);
5433 /* read result TF if requested */
5434 if (qc
->flags
& ATA_QCFLAG_RESULT_TF
)
5437 __ata_qc_complete(qc
);
5439 if (qc
->flags
& ATA_QCFLAG_EH_SCHEDULED
)
5442 /* read result TF if failed or requested */
5443 if (qc
->err_mask
|| qc
->flags
& ATA_QCFLAG_RESULT_TF
)
5446 __ata_qc_complete(qc
);
5451 * ata_qc_complete_multiple - Complete multiple qcs successfully
5452 * @ap: port in question
5453 * @qc_active: new qc_active mask
5454 * @finish_qc: LLDD callback invoked before completing a qc
5456 * Complete in-flight commands. This functions is meant to be
5457 * called from low-level driver's interrupt routine to complete
5458 * requests normally. ap->qc_active and @qc_active is compared
5459 * and commands are completed accordingly.
5462 * spin_lock_irqsave(host lock)
5465 * Number of completed commands on success, -errno otherwise.
5467 int ata_qc_complete_multiple(struct ata_port
*ap
, u32 qc_active
,
5468 void (*finish_qc
)(struct ata_queued_cmd
*))
5474 done_mask
= ap
->qc_active
^ qc_active
;
5476 if (unlikely(done_mask
& qc_active
)) {
5477 ata_port_printk(ap
, KERN_ERR
, "illegal qc_active transition "
5478 "(%08x->%08x)\n", ap
->qc_active
, qc_active
);
5482 for (i
= 0; i
< ATA_MAX_QUEUE
; i
++) {
5483 struct ata_queued_cmd
*qc
;
5485 if (!(done_mask
& (1 << i
)))
5488 if ((qc
= ata_qc_from_tag(ap
, i
))) {
5491 ata_qc_complete(qc
);
5499 static inline int ata_should_dma_map(struct ata_queued_cmd
*qc
)
5501 struct ata_port
*ap
= qc
->ap
;
5503 switch (qc
->tf
.protocol
) {
5506 case ATA_PROT_ATAPI_DMA
:
5509 case ATA_PROT_ATAPI
:
5511 if (ap
->flags
& ATA_FLAG_PIO_DMA
)
5524 * ata_qc_issue - issue taskfile to device
5525 * @qc: command to issue to device
5527 * Prepare an ATA command to submission to device.
5528 * This includes mapping the data into a DMA-able
5529 * area, filling in the S/G table, and finally
5530 * writing the taskfile to hardware, starting the command.
5533 * spin_lock_irqsave(host lock)
5535 void ata_qc_issue(struct ata_queued_cmd
*qc
)
5537 struct ata_port
*ap
= qc
->ap
;
5538 struct ata_link
*link
= qc
->dev
->link
;
5540 /* Make sure only one non-NCQ command is outstanding. The
5541 * check is skipped for old EH because it reuses active qc to
5542 * request ATAPI sense.
5544 WARN_ON(ap
->ops
->error_handler
&& ata_tag_valid(link
->active_tag
));
5546 if (qc
->tf
.protocol
== ATA_PROT_NCQ
) {
5547 WARN_ON(link
->sactive
& (1 << qc
->tag
));
5548 link
->sactive
|= 1 << qc
->tag
;
5550 WARN_ON(link
->sactive
);
5551 link
->active_tag
= qc
->tag
;
5554 qc
->flags
|= ATA_QCFLAG_ACTIVE
;
5555 ap
->qc_active
|= 1 << qc
->tag
;
5557 if (ata_should_dma_map(qc
)) {
5558 if (qc
->flags
& ATA_QCFLAG_SG
) {
5559 if (ata_sg_setup(qc
))
5561 } else if (qc
->flags
& ATA_QCFLAG_SINGLE
) {
5562 if (ata_sg_setup_one(qc
))
5566 qc
->flags
&= ~ATA_QCFLAG_DMAMAP
;
5569 ap
->ops
->qc_prep(qc
);
5571 qc
->err_mask
|= ap
->ops
->qc_issue(qc
);
5572 if (unlikely(qc
->err_mask
))
5577 qc
->flags
&= ~ATA_QCFLAG_DMAMAP
;
5578 qc
->err_mask
|= AC_ERR_SYSTEM
;
5580 ata_qc_complete(qc
);
5584 * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
5585 * @qc: command to issue to device
5587 * Using various libata functions and hooks, this function
5588 * starts an ATA command. ATA commands are grouped into
5589 * classes called "protocols", and issuing each type of protocol
5590 * is slightly different.
5592 * May be used as the qc_issue() entry in ata_port_operations.
5595 * spin_lock_irqsave(host lock)
5598 * Zero on success, AC_ERR_* mask on failure
5601 unsigned int ata_qc_issue_prot(struct ata_queued_cmd
*qc
)
5603 struct ata_port
*ap
= qc
->ap
;
5605 /* Use polling pio if the LLD doesn't handle
5606 * interrupt driven pio and atapi CDB interrupt.
5608 if (ap
->flags
& ATA_FLAG_PIO_POLLING
) {
5609 switch (qc
->tf
.protocol
) {
5611 case ATA_PROT_NODATA
:
5612 case ATA_PROT_ATAPI
:
5613 case ATA_PROT_ATAPI_NODATA
:
5614 qc
->tf
.flags
|= ATA_TFLAG_POLLING
;
5616 case ATA_PROT_ATAPI_DMA
:
5617 if (qc
->dev
->flags
& ATA_DFLAG_CDB_INTR
)
5618 /* see ata_dma_blacklisted() */
5626 /* select the device */
5627 ata_dev_select(ap
, qc
->dev
->devno
, 1, 0);
5629 /* start the command */
5630 switch (qc
->tf
.protocol
) {
5631 case ATA_PROT_NODATA
:
5632 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
5633 ata_qc_set_polling(qc
);
5635 ata_tf_to_host(ap
, &qc
->tf
);
5636 ap
->hsm_task_state
= HSM_ST_LAST
;
5638 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
5639 ata_port_queue_task(ap
, ata_pio_task
, qc
, 0);
5644 WARN_ON(qc
->tf
.flags
& ATA_TFLAG_POLLING
);
5646 ap
->ops
->tf_load(ap
, &qc
->tf
); /* load tf registers */
5647 ap
->ops
->bmdma_setup(qc
); /* set up bmdma */
5648 ap
->ops
->bmdma_start(qc
); /* initiate bmdma */
5649 ap
->hsm_task_state
= HSM_ST_LAST
;
5653 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
5654 ata_qc_set_polling(qc
);
5656 ata_tf_to_host(ap
, &qc
->tf
);
5658 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
) {
5659 /* PIO data out protocol */
5660 ap
->hsm_task_state
= HSM_ST_FIRST
;
5661 ata_port_queue_task(ap
, ata_pio_task
, qc
, 0);
5663 /* always send first data block using
5664 * the ata_pio_task() codepath.
5667 /* PIO data in protocol */
5668 ap
->hsm_task_state
= HSM_ST
;
5670 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
5671 ata_port_queue_task(ap
, ata_pio_task
, qc
, 0);
5673 /* if polling, ata_pio_task() handles the rest.
5674 * otherwise, interrupt handler takes over from here.
5680 case ATA_PROT_ATAPI
:
5681 case ATA_PROT_ATAPI_NODATA
:
5682 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
5683 ata_qc_set_polling(qc
);
5685 ata_tf_to_host(ap
, &qc
->tf
);
5687 ap
->hsm_task_state
= HSM_ST_FIRST
;
5689 /* send cdb by polling if no cdb interrupt */
5690 if ((!(qc
->dev
->flags
& ATA_DFLAG_CDB_INTR
)) ||
5691 (qc
->tf
.flags
& ATA_TFLAG_POLLING
))
5692 ata_port_queue_task(ap
, ata_pio_task
, qc
, 0);
5695 case ATA_PROT_ATAPI_DMA
:
5696 WARN_ON(qc
->tf
.flags
& ATA_TFLAG_POLLING
);
5698 ap
->ops
->tf_load(ap
, &qc
->tf
); /* load tf registers */
5699 ap
->ops
->bmdma_setup(qc
); /* set up bmdma */
5700 ap
->hsm_task_state
= HSM_ST_FIRST
;
5702 /* send cdb by polling if no cdb interrupt */
5703 if (!(qc
->dev
->flags
& ATA_DFLAG_CDB_INTR
))
5704 ata_port_queue_task(ap
, ata_pio_task
, qc
, 0);
5709 return AC_ERR_SYSTEM
;
5716 * ata_host_intr - Handle host interrupt for given (port, task)
5717 * @ap: Port on which interrupt arrived (possibly...)
5718 * @qc: Taskfile currently active in engine
5720 * Handle host interrupt for given queued command. Currently,
5721 * only DMA interrupts are handled. All other commands are
5722 * handled via polling with interrupts disabled (nIEN bit).
5725 * spin_lock_irqsave(host lock)
5728 * One if interrupt was handled, zero if not (shared irq).
5731 inline unsigned int ata_host_intr (struct ata_port
*ap
,
5732 struct ata_queued_cmd
*qc
)
5734 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
5735 u8 status
, host_stat
= 0;
5737 VPRINTK("ata%u: protocol %d task_state %d\n",
5738 ap
->print_id
, qc
->tf
.protocol
, ap
->hsm_task_state
);
5740 /* Check whether we are expecting interrupt in this state */
5741 switch (ap
->hsm_task_state
) {
5743 /* Some pre-ATAPI-4 devices assert INTRQ
5744 * at this state when ready to receive CDB.
5747 /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
5748 * The flag was turned on only for atapi devices.
5749 * No need to check is_atapi_taskfile(&qc->tf) again.
5751 if (!(qc
->dev
->flags
& ATA_DFLAG_CDB_INTR
))
5755 if (qc
->tf
.protocol
== ATA_PROT_DMA
||
5756 qc
->tf
.protocol
== ATA_PROT_ATAPI_DMA
) {
5757 /* check status of DMA engine */
5758 host_stat
= ap
->ops
->bmdma_status(ap
);
5759 VPRINTK("ata%u: host_stat 0x%X\n",
5760 ap
->print_id
, host_stat
);
5762 /* if it's not our irq... */
5763 if (!(host_stat
& ATA_DMA_INTR
))
5766 /* before we do anything else, clear DMA-Start bit */
5767 ap
->ops
->bmdma_stop(qc
);
5769 if (unlikely(host_stat
& ATA_DMA_ERR
)) {
5770 /* error when transfering data to/from memory */
5771 qc
->err_mask
|= AC_ERR_HOST_BUS
;
5772 ap
->hsm_task_state
= HSM_ST_ERR
;
5782 /* check altstatus */
5783 status
= ata_altstatus(ap
);
5784 if (status
& ATA_BUSY
)
5787 /* check main status, clearing INTRQ */
5788 status
= ata_chk_status(ap
);
5789 if (unlikely(status
& ATA_BUSY
))
5792 /* ack bmdma irq events */
5793 ap
->ops
->irq_clear(ap
);
5795 ata_hsm_move(ap
, qc
, status
, 0);
5797 if (unlikely(qc
->err_mask
) && (qc
->tf
.protocol
== ATA_PROT_DMA
||
5798 qc
->tf
.protocol
== ATA_PROT_ATAPI_DMA
))
5799 ata_ehi_push_desc(ehi
, "BMDMA stat 0x%x", host_stat
);
5801 return 1; /* irq handled */
5804 ap
->stats
.idle_irq
++;
5807 if ((ap
->stats
.idle_irq
% 1000) == 0) {
5809 ap
->ops
->irq_clear(ap
);
5810 ata_port_printk(ap
, KERN_WARNING
, "irq trap\n");
5814 return 0; /* irq not handled */
5818 * ata_interrupt - Default ATA host interrupt handler
5819 * @irq: irq line (unused)
5820 * @dev_instance: pointer to our ata_host information structure
5822 * Default interrupt handler for PCI IDE devices. Calls
5823 * ata_host_intr() for each port that is not disabled.
5826 * Obtains host lock during operation.
5829 * IRQ_NONE or IRQ_HANDLED.
5832 irqreturn_t
ata_interrupt (int irq
, void *dev_instance
)
5834 struct ata_host
*host
= dev_instance
;
5836 unsigned int handled
= 0;
5837 unsigned long flags
;
5839 /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
5840 spin_lock_irqsave(&host
->lock
, flags
);
5842 for (i
= 0; i
< host
->n_ports
; i
++) {
5843 struct ata_port
*ap
;
5845 ap
= host
->ports
[i
];
5847 !(ap
->flags
& ATA_FLAG_DISABLED
)) {
5848 struct ata_queued_cmd
*qc
;
5850 qc
= ata_qc_from_tag(ap
, ap
->link
.active_tag
);
5851 if (qc
&& (!(qc
->tf
.flags
& ATA_TFLAG_POLLING
)) &&
5852 (qc
->flags
& ATA_QCFLAG_ACTIVE
))
5853 handled
|= ata_host_intr(ap
, qc
);
5857 spin_unlock_irqrestore(&host
->lock
, flags
);
5859 return IRQ_RETVAL(handled
);
5863 * sata_scr_valid - test whether SCRs are accessible
5864 * @link: ATA link to test SCR accessibility for
5866 * Test whether SCRs are accessible for @link.
5872 * 1 if SCRs are accessible, 0 otherwise.
5874 int sata_scr_valid(struct ata_link
*link
)
5876 struct ata_port
*ap
= link
->ap
;
5878 return (ap
->flags
& ATA_FLAG_SATA
) && ap
->ops
->scr_read
;
5882 * sata_scr_read - read SCR register of the specified port
5883 * @link: ATA link to read SCR for
5885 * @val: Place to store read value
5887 * Read SCR register @reg of @link into *@val. This function is
5888 * guaranteed to succeed if the cable type of the port is SATA
5889 * and the port implements ->scr_read.
5895 * 0 on success, negative errno on failure.
5897 int sata_scr_read(struct ata_link
*link
, int reg
, u32
*val
)
5899 struct ata_port
*ap
= link
->ap
;
5901 if (sata_scr_valid(link
))
5902 return ap
->ops
->scr_read(ap
, reg
, val
);
5907 * sata_scr_write - write SCR register of the specified port
5908 * @link: ATA link to write SCR for
5909 * @reg: SCR to write
5910 * @val: value to write
5912 * Write @val to SCR register @reg of @link. This function is
5913 * guaranteed to succeed if the cable type of the port is SATA
5914 * and the port implements ->scr_read.
5920 * 0 on success, negative errno on failure.
5922 int sata_scr_write(struct ata_link
*link
, int reg
, u32 val
)
5924 struct ata_port
*ap
= link
->ap
;
5926 if (sata_scr_valid(link
))
5927 return ap
->ops
->scr_write(ap
, reg
, val
);
5932 * sata_scr_write_flush - write SCR register of the specified port and flush
5933 * @link: ATA link to write SCR for
5934 * @reg: SCR to write
5935 * @val: value to write
5937 * This function is identical to sata_scr_write() except that this
5938 * function performs flush after writing to the register.
5944 * 0 on success, negative errno on failure.
5946 int sata_scr_write_flush(struct ata_link
*link
, int reg
, u32 val
)
5948 struct ata_port
*ap
= link
->ap
;
5951 if (sata_scr_valid(link
)) {
5952 rc
= ap
->ops
->scr_write(ap
, reg
, val
);
5954 rc
= ap
->ops
->scr_read(ap
, reg
, &val
);
5961 * ata_link_online - test whether the given link is online
5962 * @link: ATA link to test
5964 * Test whether @link is online. Note that this function returns
5965 * 0 if online status of @link cannot be obtained, so
5966 * ata_link_online(link) != !ata_link_offline(link).
5972 * 1 if the port online status is available and online.
5974 int ata_link_online(struct ata_link
*link
)
5978 if (sata_scr_read(link
, SCR_STATUS
, &sstatus
) == 0 &&
5979 (sstatus
& 0xf) == 0x3)
5985 * ata_link_offline - test whether the given link is offline
5986 * @link: ATA link to test
5988 * Test whether @link is offline. Note that this function
5989 * returns 0 if offline status of @link cannot be obtained, so
5990 * ata_link_online(link) != !ata_link_offline(link).
5996 * 1 if the port offline status is available and offline.
5998 int ata_link_offline(struct ata_link
*link
)
6002 if (sata_scr_read(link
, SCR_STATUS
, &sstatus
) == 0 &&
6003 (sstatus
& 0xf) != 0x3)
6008 int ata_flush_cache(struct ata_device
*dev
)
6010 unsigned int err_mask
;
6013 if (!ata_try_flush_cache(dev
))
6016 if (dev
->flags
& ATA_DFLAG_FLUSH_EXT
)
6017 cmd
= ATA_CMD_FLUSH_EXT
;
6019 cmd
= ATA_CMD_FLUSH
;
6021 /* This is wrong. On a failed flush we get back the LBA of the lost
6022 sector and we should (assuming it wasn't aborted as unknown) issue
6023 a further flush command to continue the writeback until it
6025 err_mask
= ata_do_simple_cmd(dev
, cmd
);
6027 ata_dev_printk(dev
, KERN_ERR
, "failed to flush cache\n");
6035 static int ata_host_request_pm(struct ata_host
*host
, pm_message_t mesg
,
6036 unsigned int action
, unsigned int ehi_flags
,
6039 unsigned long flags
;
6042 for (i
= 0; i
< host
->n_ports
; i
++) {
6043 struct ata_port
*ap
= host
->ports
[i
];
6044 struct ata_link
*link
;
6046 /* Previous resume operation might still be in
6047 * progress. Wait for PM_PENDING to clear.
6049 if (ap
->pflags
& ATA_PFLAG_PM_PENDING
) {
6050 ata_port_wait_eh(ap
);
6051 WARN_ON(ap
->pflags
& ATA_PFLAG_PM_PENDING
);
6054 /* request PM ops to EH */
6055 spin_lock_irqsave(ap
->lock
, flags
);
6060 ap
->pm_result
= &rc
;
6063 ap
->pflags
|= ATA_PFLAG_PM_PENDING
;
6064 __ata_port_for_each_link(link
, ap
) {
6065 link
->eh_info
.action
|= action
;
6066 link
->eh_info
.flags
|= ehi_flags
;
6069 ata_port_schedule_eh(ap
);
6071 spin_unlock_irqrestore(ap
->lock
, flags
);
6073 /* wait and check result */
6075 ata_port_wait_eh(ap
);
6076 WARN_ON(ap
->pflags
& ATA_PFLAG_PM_PENDING
);
6086 * ata_host_suspend - suspend host
6087 * @host: host to suspend
6090 * Suspend @host. Actual operation is performed by EH. This
6091 * function requests EH to perform PM operations and waits for EH
6095 * Kernel thread context (may sleep).
6098 * 0 on success, -errno on failure.
6100 int ata_host_suspend(struct ata_host
*host
, pm_message_t mesg
)
6104 rc
= ata_host_request_pm(host
, mesg
, 0, ATA_EHI_QUIET
, 1);
6106 host
->dev
->power
.power_state
= mesg
;
6111 * ata_host_resume - resume host
6112 * @host: host to resume
6114 * Resume @host. Actual operation is performed by EH. This
6115 * function requests EH to perform PM operations and returns.
6116 * Note that all resume operations are performed parallely.
6119 * Kernel thread context (may sleep).
6121 void ata_host_resume(struct ata_host
*host
)
6123 ata_host_request_pm(host
, PMSG_ON
, ATA_EH_SOFTRESET
,
6124 ATA_EHI_NO_AUTOPSY
| ATA_EHI_QUIET
, 0);
6125 host
->dev
->power
.power_state
= PMSG_ON
;
6130 * ata_port_start - Set port up for dma.
6131 * @ap: Port to initialize
6133 * Called just after data structures for each port are
6134 * initialized. Allocates space for PRD table.
6136 * May be used as the port_start() entry in ata_port_operations.
6139 * Inherited from caller.
6141 int ata_port_start(struct ata_port
*ap
)
6143 struct device
*dev
= ap
->dev
;
6146 ap
->prd
= dmam_alloc_coherent(dev
, ATA_PRD_TBL_SZ
, &ap
->prd_dma
,
6151 rc
= ata_pad_alloc(ap
, dev
);
6155 DPRINTK("prd alloc, virt %p, dma %llx\n", ap
->prd
,
6156 (unsigned long long)ap
->prd_dma
);
6161 * ata_dev_init - Initialize an ata_device structure
6162 * @dev: Device structure to initialize
6164 * Initialize @dev in preparation for probing.
6167 * Inherited from caller.
6169 void ata_dev_init(struct ata_device
*dev
)
6171 struct ata_link
*link
= dev
->link
;
6172 struct ata_port
*ap
= link
->ap
;
6173 unsigned long flags
;
6175 /* SATA spd limit is bound to the first device */
6176 link
->sata_spd_limit
= link
->hw_sata_spd_limit
;
6179 /* High bits of dev->flags are used to record warm plug
6180 * requests which occur asynchronously. Synchronize using
6183 spin_lock_irqsave(ap
->lock
, flags
);
6184 dev
->flags
&= ~ATA_DFLAG_INIT_MASK
;
6186 spin_unlock_irqrestore(ap
->lock
, flags
);
6188 memset((void *)dev
+ ATA_DEVICE_CLEAR_OFFSET
, 0,
6189 sizeof(*dev
) - ATA_DEVICE_CLEAR_OFFSET
);
6190 dev
->pio_mask
= UINT_MAX
;
6191 dev
->mwdma_mask
= UINT_MAX
;
6192 dev
->udma_mask
= UINT_MAX
;
6196 * ata_link_init - Initialize an ata_link structure
6197 * @ap: ATA port link is attached to
6198 * @link: Link structure to initialize
6199 * @pmp: Port multiplier port number
6204 * Kernel thread context (may sleep)
6206 static void ata_link_init(struct ata_port
*ap
, struct ata_link
*link
, int pmp
)
6210 /* clear everything except for devices */
6211 memset(link
, 0, offsetof(struct ata_link
, device
[0]));
6215 link
->active_tag
= ATA_TAG_POISON
;
6216 link
->hw_sata_spd_limit
= UINT_MAX
;
6218 /* can't use iterator, ap isn't initialized yet */
6219 for (i
= 0; i
< ATA_MAX_DEVICES
; i
++) {
6220 struct ata_device
*dev
= &link
->device
[i
];
6223 dev
->devno
= dev
- link
->device
;
6229 * sata_link_init_spd - Initialize link->sata_spd_limit
6230 * @link: Link to configure sata_spd_limit for
6232 * Initialize @link->[hw_]sata_spd_limit to the currently
6236 * Kernel thread context (may sleep).
6239 * 0 on success, -errno on failure.
6241 static int sata_link_init_spd(struct ata_link
*link
)
6246 rc
= sata_scr_read(link
, SCR_CONTROL
, &scontrol
);
6250 spd
= (scontrol
>> 4) & 0xf;
6252 link
->hw_sata_spd_limit
&= (1 << spd
) - 1;
6254 link
->sata_spd_limit
= link
->hw_sata_spd_limit
;
6260 * ata_port_alloc - allocate and initialize basic ATA port resources
6261 * @host: ATA host this allocated port belongs to
6263 * Allocate and initialize basic ATA port resources.
6266 * Allocate ATA port on success, NULL on failure.
6269 * Inherited from calling layer (may sleep).
6271 struct ata_port
*ata_port_alloc(struct ata_host
*host
)
6273 struct ata_port
*ap
;
6277 ap
= kzalloc(sizeof(*ap
), GFP_KERNEL
);
6281 ap
->pflags
|= ATA_PFLAG_INITIALIZING
;
6282 ap
->lock
= &host
->lock
;
6283 ap
->flags
= ATA_FLAG_DISABLED
;
6285 ap
->ctl
= ATA_DEVCTL_OBS
;
6287 ap
->dev
= host
->dev
;
6288 ap
->last_ctl
= 0xFF;
6290 #if defined(ATA_VERBOSE_DEBUG)
6291 /* turn on all debugging levels */
6292 ap
->msg_enable
= 0x00FF;
6293 #elif defined(ATA_DEBUG)
6294 ap
->msg_enable
= ATA_MSG_DRV
| ATA_MSG_INFO
| ATA_MSG_CTL
| ATA_MSG_WARN
| ATA_MSG_ERR
;
6296 ap
->msg_enable
= ATA_MSG_DRV
| ATA_MSG_ERR
| ATA_MSG_WARN
;
6299 INIT_DELAYED_WORK(&ap
->port_task
, NULL
);
6300 INIT_DELAYED_WORK(&ap
->hotplug_task
, ata_scsi_hotplug
);
6301 INIT_WORK(&ap
->scsi_rescan_task
, ata_scsi_dev_rescan
);
6302 INIT_LIST_HEAD(&ap
->eh_done_q
);
6303 init_waitqueue_head(&ap
->eh_wait_q
);
6304 init_timer_deferrable(&ap
->fastdrain_timer
);
6305 ap
->fastdrain_timer
.function
= ata_eh_fastdrain_timerfn
;
6306 ap
->fastdrain_timer
.data
= (unsigned long)ap
;
6308 ap
->cbl
= ATA_CBL_NONE
;
6310 ata_link_init(ap
, &ap
->link
, 0);
6313 ap
->stats
.unhandled_irq
= 1;
6314 ap
->stats
.idle_irq
= 1;
6319 static void ata_host_release(struct device
*gendev
, void *res
)
6321 struct ata_host
*host
= dev_get_drvdata(gendev
);
6324 for (i
= 0; i
< host
->n_ports
; i
++) {
6325 struct ata_port
*ap
= host
->ports
[i
];
6330 if ((host
->flags
& ATA_HOST_STARTED
) && ap
->ops
->port_stop
)
6331 ap
->ops
->port_stop(ap
);
6334 if ((host
->flags
& ATA_HOST_STARTED
) && host
->ops
->host_stop
)
6335 host
->ops
->host_stop(host
);
6337 for (i
= 0; i
< host
->n_ports
; i
++) {
6338 struct ata_port
*ap
= host
->ports
[i
];
6344 scsi_host_put(ap
->scsi_host
);
6347 host
->ports
[i
] = NULL
;
6350 dev_set_drvdata(gendev
, NULL
);
6354 * ata_host_alloc - allocate and init basic ATA host resources
6355 * @dev: generic device this host is associated with
6356 * @max_ports: maximum number of ATA ports associated with this host
6358 * Allocate and initialize basic ATA host resources. LLD calls
6359 * this function to allocate a host, initializes it fully and
6360 * attaches it using ata_host_register().
6362 * @max_ports ports are allocated and host->n_ports is
6363 * initialized to @max_ports. The caller is allowed to decrease
6364 * host->n_ports before calling ata_host_register(). The unused
6365 * ports will be automatically freed on registration.
6368 * Allocate ATA host on success, NULL on failure.
6371 * Inherited from calling layer (may sleep).
6373 struct ata_host
*ata_host_alloc(struct device
*dev
, int max_ports
)
6375 struct ata_host
*host
;
6381 if (!devres_open_group(dev
, NULL
, GFP_KERNEL
))
6384 /* alloc a container for our list of ATA ports (buses) */
6385 sz
= sizeof(struct ata_host
) + (max_ports
+ 1) * sizeof(void *);
6386 /* alloc a container for our list of ATA ports (buses) */
6387 host
= devres_alloc(ata_host_release
, sz
, GFP_KERNEL
);
6391 devres_add(dev
, host
);
6392 dev_set_drvdata(dev
, host
);
6394 spin_lock_init(&host
->lock
);
6396 host
->n_ports
= max_ports
;
6398 /* allocate ports bound to this host */
6399 for (i
= 0; i
< max_ports
; i
++) {
6400 struct ata_port
*ap
;
6402 ap
= ata_port_alloc(host
);
6407 host
->ports
[i
] = ap
;
6410 devres_remove_group(dev
, NULL
);
6414 devres_release_group(dev
, NULL
);
6419 * ata_host_alloc_pinfo - alloc host and init with port_info array
6420 * @dev: generic device this host is associated with
6421 * @ppi: array of ATA port_info to initialize host with
6422 * @n_ports: number of ATA ports attached to this host
6424 * Allocate ATA host and initialize with info from @ppi. If NULL
6425 * terminated, @ppi may contain fewer entries than @n_ports. The
6426 * last entry will be used for the remaining ports.
6429 * Allocate ATA host on success, NULL on failure.
6432 * Inherited from calling layer (may sleep).
6434 struct ata_host
*ata_host_alloc_pinfo(struct device
*dev
,
6435 const struct ata_port_info
* const * ppi
,
6438 const struct ata_port_info
*pi
;
6439 struct ata_host
*host
;
6442 host
= ata_host_alloc(dev
, n_ports
);
6446 for (i
= 0, j
= 0, pi
= NULL
; i
< host
->n_ports
; i
++) {
6447 struct ata_port
*ap
= host
->ports
[i
];
6452 ap
->pio_mask
= pi
->pio_mask
;
6453 ap
->mwdma_mask
= pi
->mwdma_mask
;
6454 ap
->udma_mask
= pi
->udma_mask
;
6455 ap
->flags
|= pi
->flags
;
6456 ap
->link
.flags
|= pi
->link_flags
;
6457 ap
->ops
= pi
->port_ops
;
6459 if (!host
->ops
&& (pi
->port_ops
!= &ata_dummy_port_ops
))
6460 host
->ops
= pi
->port_ops
;
6461 if (!host
->private_data
&& pi
->private_data
)
6462 host
->private_data
= pi
->private_data
;
6469 * ata_host_start - start and freeze ports of an ATA host
6470 * @host: ATA host to start ports for
6472 * Start and then freeze ports of @host. Started status is
6473 * recorded in host->flags, so this function can be called
6474 * multiple times. Ports are guaranteed to get started only
6475 * once. If host->ops isn't initialized yet, its set to the
6476 * first non-dummy port ops.
6479 * Inherited from calling layer (may sleep).
6482 * 0 if all ports are started successfully, -errno otherwise.
6484 int ata_host_start(struct ata_host
*host
)
6488 if (host
->flags
& ATA_HOST_STARTED
)
6491 for (i
= 0; i
< host
->n_ports
; i
++) {
6492 struct ata_port
*ap
= host
->ports
[i
];
6494 if (!host
->ops
&& !ata_port_is_dummy(ap
))
6495 host
->ops
= ap
->ops
;
6497 if (ap
->ops
->port_start
) {
6498 rc
= ap
->ops
->port_start(ap
);
6500 ata_port_printk(ap
, KERN_ERR
, "failed to "
6501 "start port (errno=%d)\n", rc
);
6506 ata_eh_freeze_port(ap
);
6509 host
->flags
|= ATA_HOST_STARTED
;
6514 struct ata_port
*ap
= host
->ports
[i
];
6516 if (ap
->ops
->port_stop
)
6517 ap
->ops
->port_stop(ap
);
6523 * ata_sas_host_init - Initialize a host struct
6524 * @host: host to initialize
6525 * @dev: device host is attached to
6526 * @flags: host flags
6530 * PCI/etc. bus probe sem.
6533 /* KILLME - the only user left is ipr */
6534 void ata_host_init(struct ata_host
*host
, struct device
*dev
,
6535 unsigned long flags
, const struct ata_port_operations
*ops
)
6537 spin_lock_init(&host
->lock
);
6539 host
->flags
= flags
;
6544 * ata_host_register - register initialized ATA host
6545 * @host: ATA host to register
6546 * @sht: template for SCSI host
6548 * Register initialized ATA host. @host is allocated using
6549 * ata_host_alloc() and fully initialized by LLD. This function
6550 * starts ports, registers @host with ATA and SCSI layers and
6551 * probe registered devices.
6554 * Inherited from calling layer (may sleep).
6557 * 0 on success, -errno otherwise.
6559 int ata_host_register(struct ata_host
*host
, struct scsi_host_template
*sht
)
6563 /* host must have been started */
6564 if (!(host
->flags
& ATA_HOST_STARTED
)) {
6565 dev_printk(KERN_ERR
, host
->dev
,
6566 "BUG: trying to register unstarted host\n");
6571 /* Blow away unused ports. This happens when LLD can't
6572 * determine the exact number of ports to allocate at
6575 for (i
= host
->n_ports
; host
->ports
[i
]; i
++)
6576 kfree(host
->ports
[i
]);
6578 /* give ports names and add SCSI hosts */
6579 for (i
= 0; i
< host
->n_ports
; i
++)
6580 host
->ports
[i
]->print_id
= ata_print_id
++;
6582 rc
= ata_scsi_add_hosts(host
, sht
);
6586 /* associate with ACPI nodes */
6587 ata_acpi_associate(host
);
6589 /* set cable, sata_spd_limit and report */
6590 for (i
= 0; i
< host
->n_ports
; i
++) {
6591 struct ata_port
*ap
= host
->ports
[i
];
6592 unsigned long xfer_mask
;
6594 /* set SATA cable type if still unset */
6595 if (ap
->cbl
== ATA_CBL_NONE
&& (ap
->flags
& ATA_FLAG_SATA
))
6596 ap
->cbl
= ATA_CBL_SATA
;
6598 /* init sata_spd_limit to the current value */
6599 sata_link_init_spd(&ap
->link
);
6601 /* print per-port info to dmesg */
6602 xfer_mask
= ata_pack_xfermask(ap
->pio_mask
, ap
->mwdma_mask
,
6605 if (!ata_port_is_dummy(ap
))
6606 ata_port_printk(ap
, KERN_INFO
,
6607 "%cATA max %s %s\n",
6608 (ap
->flags
& ATA_FLAG_SATA
) ? 'S' : 'P',
6609 ata_mode_string(xfer_mask
),
6610 ap
->link
.eh_info
.desc
);
6612 ata_port_printk(ap
, KERN_INFO
, "DUMMY\n");
6615 /* perform each probe synchronously */
6616 DPRINTK("probe begin\n");
6617 for (i
= 0; i
< host
->n_ports
; i
++) {
6618 struct ata_port
*ap
= host
->ports
[i
];
6622 if (ap
->ops
->error_handler
) {
6623 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
6624 unsigned long flags
;
6628 /* kick EH for boot probing */
6629 spin_lock_irqsave(ap
->lock
, flags
);
6632 (1 << ata_link_max_devices(&ap
->link
)) - 1;
6633 ehi
->action
|= ATA_EH_SOFTRESET
;
6634 ehi
->flags
|= ATA_EHI_NO_AUTOPSY
| ATA_EHI_QUIET
;
6636 ap
->pflags
&= ~ATA_PFLAG_INITIALIZING
;
6637 ap
->pflags
|= ATA_PFLAG_LOADING
;
6638 ata_port_schedule_eh(ap
);
6640 spin_unlock_irqrestore(ap
->lock
, flags
);
6642 /* wait for EH to finish */
6643 ata_port_wait_eh(ap
);
6645 DPRINTK("ata%u: bus probe begin\n", ap
->print_id
);
6646 rc
= ata_bus_probe(ap
);
6647 DPRINTK("ata%u: bus probe end\n", ap
->print_id
);
6650 /* FIXME: do something useful here?
6651 * Current libata behavior will
6652 * tear down everything when
6653 * the module is removed
6654 * or the h/w is unplugged.
6660 /* probes are done, now scan each port's disk(s) */
6661 DPRINTK("host probe begin\n");
6662 for (i
= 0; i
< host
->n_ports
; i
++) {
6663 struct ata_port
*ap
= host
->ports
[i
];
6665 ata_scsi_scan_host(ap
, 1);
6672 * ata_host_activate - start host, request IRQ and register it
6673 * @host: target ATA host
6674 * @irq: IRQ to request
6675 * @irq_handler: irq_handler used when requesting IRQ
6676 * @irq_flags: irq_flags used when requesting IRQ
6677 * @sht: scsi_host_template to use when registering the host
6679 * After allocating an ATA host and initializing it, most libata
6680 * LLDs perform three steps to activate the host - start host,
6681 * request IRQ and register it. This helper takes necessasry
6682 * arguments and performs the three steps in one go.
6685 * Inherited from calling layer (may sleep).
6688 * 0 on success, -errno otherwise.
6690 int ata_host_activate(struct ata_host
*host
, int irq
,
6691 irq_handler_t irq_handler
, unsigned long irq_flags
,
6692 struct scsi_host_template
*sht
)
6696 rc
= ata_host_start(host
);
6700 rc
= devm_request_irq(host
->dev
, irq
, irq_handler
, irq_flags
,
6701 dev_driver_string(host
->dev
), host
);
6705 for (i
= 0; i
< host
->n_ports
; i
++)
6706 ata_port_desc(host
->ports
[i
], "irq %d", irq
);
6708 rc
= ata_host_register(host
, sht
);
6709 /* if failed, just free the IRQ and leave ports alone */
6711 devm_free_irq(host
->dev
, irq
, host
);
6717 * ata_port_detach - Detach ATA port in prepration of device removal
6718 * @ap: ATA port to be detached
6720 * Detach all ATA devices and the associated SCSI devices of @ap;
6721 * then, remove the associated SCSI host. @ap is guaranteed to
6722 * be quiescent on return from this function.
6725 * Kernel thread context (may sleep).
6727 void ata_port_detach(struct ata_port
*ap
)
6729 unsigned long flags
;
6730 struct ata_link
*link
;
6731 struct ata_device
*dev
;
6733 if (!ap
->ops
->error_handler
)
6736 /* tell EH we're leaving & flush EH */
6737 spin_lock_irqsave(ap
->lock
, flags
);
6738 ap
->pflags
|= ATA_PFLAG_UNLOADING
;
6739 spin_unlock_irqrestore(ap
->lock
, flags
);
6741 ata_port_wait_eh(ap
);
6743 /* EH is now guaranteed to see UNLOADING, so no new device
6744 * will be attached. Disable all existing devices.
6746 spin_lock_irqsave(ap
->lock
, flags
);
6748 ata_port_for_each_link(link
, ap
) {
6749 ata_link_for_each_dev(dev
, link
)
6750 ata_dev_disable(dev
);
6753 spin_unlock_irqrestore(ap
->lock
, flags
);
6755 /* Final freeze & EH. All in-flight commands are aborted. EH
6756 * will be skipped and retrials will be terminated with bad
6759 spin_lock_irqsave(ap
->lock
, flags
);
6760 ata_port_freeze(ap
); /* won't be thawed */
6761 spin_unlock_irqrestore(ap
->lock
, flags
);
6763 ata_port_wait_eh(ap
);
6764 cancel_rearming_delayed_work(&ap
->hotplug_task
);
6767 /* remove the associated SCSI host */
6768 scsi_remove_host(ap
->scsi_host
);
6772 * ata_host_detach - Detach all ports of an ATA host
6773 * @host: Host to detach
6775 * Detach all ports of @host.
6778 * Kernel thread context (may sleep).
6780 void ata_host_detach(struct ata_host
*host
)
6784 for (i
= 0; i
< host
->n_ports
; i
++)
6785 ata_port_detach(host
->ports
[i
]);
6789 * ata_std_ports - initialize ioaddr with standard port offsets.
6790 * @ioaddr: IO address structure to be initialized
6792 * Utility function which initializes data_addr, error_addr,
6793 * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
6794 * device_addr, status_addr, and command_addr to standard offsets
6795 * relative to cmd_addr.
6797 * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
6800 void ata_std_ports(struct ata_ioports
*ioaddr
)
6802 ioaddr
->data_addr
= ioaddr
->cmd_addr
+ ATA_REG_DATA
;
6803 ioaddr
->error_addr
= ioaddr
->cmd_addr
+ ATA_REG_ERR
;
6804 ioaddr
->feature_addr
= ioaddr
->cmd_addr
+ ATA_REG_FEATURE
;
6805 ioaddr
->nsect_addr
= ioaddr
->cmd_addr
+ ATA_REG_NSECT
;
6806 ioaddr
->lbal_addr
= ioaddr
->cmd_addr
+ ATA_REG_LBAL
;
6807 ioaddr
->lbam_addr
= ioaddr
->cmd_addr
+ ATA_REG_LBAM
;
6808 ioaddr
->lbah_addr
= ioaddr
->cmd_addr
+ ATA_REG_LBAH
;
6809 ioaddr
->device_addr
= ioaddr
->cmd_addr
+ ATA_REG_DEVICE
;
6810 ioaddr
->status_addr
= ioaddr
->cmd_addr
+ ATA_REG_STATUS
;
6811 ioaddr
->command_addr
= ioaddr
->cmd_addr
+ ATA_REG_CMD
;
6818 * ata_pci_remove_one - PCI layer callback for device removal
6819 * @pdev: PCI device that was removed
6821 * PCI layer indicates to libata via this hook that hot-unplug or
6822 * module unload event has occurred. Detach all ports. Resource
6823 * release is handled via devres.
6826 * Inherited from PCI layer (may sleep).
6828 void ata_pci_remove_one(struct pci_dev
*pdev
)
6830 struct device
*dev
= pci_dev_to_dev(pdev
);
6831 struct ata_host
*host
= dev_get_drvdata(dev
);
6833 ata_host_detach(host
);
6836 /* move to PCI subsystem */
6837 int pci_test_config_bits(struct pci_dev
*pdev
, const struct pci_bits
*bits
)
6839 unsigned long tmp
= 0;
6841 switch (bits
->width
) {
6844 pci_read_config_byte(pdev
, bits
->reg
, &tmp8
);
6850 pci_read_config_word(pdev
, bits
->reg
, &tmp16
);
6856 pci_read_config_dword(pdev
, bits
->reg
, &tmp32
);
6867 return (tmp
== bits
->val
) ? 1 : 0;
6871 void ata_pci_device_do_suspend(struct pci_dev
*pdev
, pm_message_t mesg
)
6873 pci_save_state(pdev
);
6874 pci_disable_device(pdev
);
6876 if (mesg
.event
== PM_EVENT_SUSPEND
)
6877 pci_set_power_state(pdev
, PCI_D3hot
);
6880 int ata_pci_device_do_resume(struct pci_dev
*pdev
)
6884 pci_set_power_state(pdev
, PCI_D0
);
6885 pci_restore_state(pdev
);
6887 rc
= pcim_enable_device(pdev
);
6889 dev_printk(KERN_ERR
, &pdev
->dev
,
6890 "failed to enable device after resume (%d)\n", rc
);
6894 pci_set_master(pdev
);
6898 int ata_pci_device_suspend(struct pci_dev
*pdev
, pm_message_t mesg
)
6900 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
6903 rc
= ata_host_suspend(host
, mesg
);
6907 ata_pci_device_do_suspend(pdev
, mesg
);
6912 int ata_pci_device_resume(struct pci_dev
*pdev
)
6914 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
6917 rc
= ata_pci_device_do_resume(pdev
);
6919 ata_host_resume(host
);
6922 #endif /* CONFIG_PM */
6924 #endif /* CONFIG_PCI */
6927 static int __init
ata_init(void)
6929 ata_probe_timeout
*= HZ
;
6930 ata_wq
= create_workqueue("ata");
6934 ata_aux_wq
= create_singlethread_workqueue("ata_aux");
6936 destroy_workqueue(ata_wq
);
6940 printk(KERN_DEBUG
"libata version " DRV_VERSION
" loaded.\n");
6944 static void __exit
ata_exit(void)
6946 destroy_workqueue(ata_wq
);
6947 destroy_workqueue(ata_aux_wq
);
6950 subsys_initcall(ata_init
);
6951 module_exit(ata_exit
);
6953 static unsigned long ratelimit_time
;
6954 static DEFINE_SPINLOCK(ata_ratelimit_lock
);
6956 int ata_ratelimit(void)
6959 unsigned long flags
;
6961 spin_lock_irqsave(&ata_ratelimit_lock
, flags
);
6963 if (time_after(jiffies
, ratelimit_time
)) {
6965 ratelimit_time
= jiffies
+ (HZ
/5);
6969 spin_unlock_irqrestore(&ata_ratelimit_lock
, flags
);
6975 * ata_wait_register - wait until register value changes
6976 * @reg: IO-mapped register
6977 * @mask: Mask to apply to read register value
6978 * @val: Wait condition
6979 * @interval_msec: polling interval in milliseconds
6980 * @timeout_msec: timeout in milliseconds
6982 * Waiting for some bits of register to change is a common
6983 * operation for ATA controllers. This function reads 32bit LE
6984 * IO-mapped register @reg and tests for the following condition.
6986 * (*@reg & mask) != val
6988 * If the condition is met, it returns; otherwise, the process is
6989 * repeated after @interval_msec until timeout.
6992 * Kernel thread context (may sleep)
6995 * The final register value.
6997 u32
ata_wait_register(void __iomem
*reg
, u32 mask
, u32 val
,
6998 unsigned long interval_msec
,
6999 unsigned long timeout_msec
)
7001 unsigned long timeout
;
7004 tmp
= ioread32(reg
);
7006 /* Calculate timeout _after_ the first read to make sure
7007 * preceding writes reach the controller before starting to
7008 * eat away the timeout.
7010 timeout
= jiffies
+ (timeout_msec
* HZ
) / 1000;
7012 while ((tmp
& mask
) == val
&& time_before(jiffies
, timeout
)) {
7013 msleep(interval_msec
);
7014 tmp
= ioread32(reg
);
7023 static void ata_dummy_noret(struct ata_port
*ap
) { }
7024 static int ata_dummy_ret0(struct ata_port
*ap
) { return 0; }
7025 static void ata_dummy_qc_noret(struct ata_queued_cmd
*qc
) { }
7027 static u8
ata_dummy_check_status(struct ata_port
*ap
)
7032 static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd
*qc
)
7034 return AC_ERR_SYSTEM
;
7037 const struct ata_port_operations ata_dummy_port_ops
= {
7038 .check_status
= ata_dummy_check_status
,
7039 .check_altstatus
= ata_dummy_check_status
,
7040 .dev_select
= ata_noop_dev_select
,
7041 .qc_prep
= ata_noop_qc_prep
,
7042 .qc_issue
= ata_dummy_qc_issue
,
7043 .freeze
= ata_dummy_noret
,
7044 .thaw
= ata_dummy_noret
,
7045 .error_handler
= ata_dummy_noret
,
7046 .post_internal_cmd
= ata_dummy_qc_noret
,
7047 .irq_clear
= ata_dummy_noret
,
7048 .port_start
= ata_dummy_ret0
,
7049 .port_stop
= ata_dummy_noret
,
7052 const struct ata_port_info ata_dummy_port_info
= {
7053 .port_ops
= &ata_dummy_port_ops
,
7057 * libata is essentially a library of internal helper functions for
7058 * low-level ATA host controller drivers. As such, the API/ABI is
7059 * likely to change as new drivers are added and updated.
7060 * Do not depend on ABI/API stability.
7063 EXPORT_SYMBOL_GPL(sata_deb_timing_normal
);
7064 EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug
);
7065 EXPORT_SYMBOL_GPL(sata_deb_timing_long
);
7066 EXPORT_SYMBOL_GPL(ata_dummy_port_ops
);
7067 EXPORT_SYMBOL_GPL(ata_dummy_port_info
);
7068 EXPORT_SYMBOL_GPL(ata_std_bios_param
);
7069 EXPORT_SYMBOL_GPL(ata_std_ports
);
7070 EXPORT_SYMBOL_GPL(ata_host_init
);
7071 EXPORT_SYMBOL_GPL(ata_host_alloc
);
7072 EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo
);
7073 EXPORT_SYMBOL_GPL(ata_host_start
);
7074 EXPORT_SYMBOL_GPL(ata_host_register
);
7075 EXPORT_SYMBOL_GPL(ata_host_activate
);
7076 EXPORT_SYMBOL_GPL(ata_host_detach
);
7077 EXPORT_SYMBOL_GPL(ata_sg_init
);
7078 EXPORT_SYMBOL_GPL(ata_sg_init_one
);
7079 EXPORT_SYMBOL_GPL(ata_hsm_move
);
7080 EXPORT_SYMBOL_GPL(ata_qc_complete
);
7081 EXPORT_SYMBOL_GPL(ata_qc_complete_multiple
);
7082 EXPORT_SYMBOL_GPL(ata_qc_issue_prot
);
7083 EXPORT_SYMBOL_GPL(ata_tf_load
);
7084 EXPORT_SYMBOL_GPL(ata_tf_read
);
7085 EXPORT_SYMBOL_GPL(ata_noop_dev_select
);
7086 EXPORT_SYMBOL_GPL(ata_std_dev_select
);
7087 EXPORT_SYMBOL_GPL(sata_print_link_status
);
7088 EXPORT_SYMBOL_GPL(ata_tf_to_fis
);
7089 EXPORT_SYMBOL_GPL(ata_tf_from_fis
);
7090 EXPORT_SYMBOL_GPL(ata_check_status
);
7091 EXPORT_SYMBOL_GPL(ata_altstatus
);
7092 EXPORT_SYMBOL_GPL(ata_exec_command
);
7093 EXPORT_SYMBOL_GPL(ata_port_start
);
7094 EXPORT_SYMBOL_GPL(ata_sff_port_start
);
7095 EXPORT_SYMBOL_GPL(ata_interrupt
);
7096 EXPORT_SYMBOL_GPL(ata_do_set_mode
);
7097 EXPORT_SYMBOL_GPL(ata_data_xfer
);
7098 EXPORT_SYMBOL_GPL(ata_data_xfer_noirq
);
7099 EXPORT_SYMBOL_GPL(ata_qc_prep
);
7100 EXPORT_SYMBOL_GPL(ata_dumb_qc_prep
);
7101 EXPORT_SYMBOL_GPL(ata_noop_qc_prep
);
7102 EXPORT_SYMBOL_GPL(ata_bmdma_setup
);
7103 EXPORT_SYMBOL_GPL(ata_bmdma_start
);
7104 EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear
);
7105 EXPORT_SYMBOL_GPL(ata_bmdma_status
);
7106 EXPORT_SYMBOL_GPL(ata_bmdma_stop
);
7107 EXPORT_SYMBOL_GPL(ata_bmdma_freeze
);
7108 EXPORT_SYMBOL_GPL(ata_bmdma_thaw
);
7109 EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh
);
7110 EXPORT_SYMBOL_GPL(ata_bmdma_error_handler
);
7111 EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd
);
7112 EXPORT_SYMBOL_GPL(ata_port_probe
);
7113 EXPORT_SYMBOL_GPL(ata_dev_disable
);
7114 EXPORT_SYMBOL_GPL(sata_set_spd
);
7115 EXPORT_SYMBOL_GPL(sata_link_debounce
);
7116 EXPORT_SYMBOL_GPL(sata_link_resume
);
7117 EXPORT_SYMBOL_GPL(sata_phy_reset
);
7118 EXPORT_SYMBOL_GPL(__sata_phy_reset
);
7119 EXPORT_SYMBOL_GPL(ata_bus_reset
);
7120 EXPORT_SYMBOL_GPL(ata_std_prereset
);
7121 EXPORT_SYMBOL_GPL(ata_std_softreset
);
7122 EXPORT_SYMBOL_GPL(sata_link_hardreset
);
7123 EXPORT_SYMBOL_GPL(sata_std_hardreset
);
7124 EXPORT_SYMBOL_GPL(ata_std_postreset
);
7125 EXPORT_SYMBOL_GPL(ata_dev_classify
);
7126 EXPORT_SYMBOL_GPL(ata_dev_pair
);
7127 EXPORT_SYMBOL_GPL(ata_port_disable
);
7128 EXPORT_SYMBOL_GPL(ata_ratelimit
);
7129 EXPORT_SYMBOL_GPL(ata_wait_register
);
7130 EXPORT_SYMBOL_GPL(ata_busy_sleep
);
7131 EXPORT_SYMBOL_GPL(ata_wait_ready
);
7132 EXPORT_SYMBOL_GPL(ata_port_queue_task
);
7133 EXPORT_SYMBOL_GPL(ata_scsi_ioctl
);
7134 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd
);
7135 EXPORT_SYMBOL_GPL(ata_scsi_slave_config
);
7136 EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy
);
7137 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth
);
7138 EXPORT_SYMBOL_GPL(ata_host_intr
);
7139 EXPORT_SYMBOL_GPL(sata_scr_valid
);
7140 EXPORT_SYMBOL_GPL(sata_scr_read
);
7141 EXPORT_SYMBOL_GPL(sata_scr_write
);
7142 EXPORT_SYMBOL_GPL(sata_scr_write_flush
);
7143 EXPORT_SYMBOL_GPL(ata_link_online
);
7144 EXPORT_SYMBOL_GPL(ata_link_offline
);
7146 EXPORT_SYMBOL_GPL(ata_host_suspend
);
7147 EXPORT_SYMBOL_GPL(ata_host_resume
);
7148 #endif /* CONFIG_PM */
7149 EXPORT_SYMBOL_GPL(ata_id_string
);
7150 EXPORT_SYMBOL_GPL(ata_id_c_string
);
7151 EXPORT_SYMBOL_GPL(ata_id_to_dma_mode
);
7152 EXPORT_SYMBOL_GPL(ata_scsi_simulate
);
7154 EXPORT_SYMBOL_GPL(ata_pio_need_iordy
);
7155 EXPORT_SYMBOL_GPL(ata_timing_compute
);
7156 EXPORT_SYMBOL_GPL(ata_timing_merge
);
7159 EXPORT_SYMBOL_GPL(pci_test_config_bits
);
7160 EXPORT_SYMBOL_GPL(ata_pci_init_sff_host
);
7161 EXPORT_SYMBOL_GPL(ata_pci_init_bmdma
);
7162 EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host
);
7163 EXPORT_SYMBOL_GPL(ata_pci_init_one
);
7164 EXPORT_SYMBOL_GPL(ata_pci_remove_one
);
7166 EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend
);
7167 EXPORT_SYMBOL_GPL(ata_pci_device_do_resume
);
7168 EXPORT_SYMBOL_GPL(ata_pci_device_suspend
);
7169 EXPORT_SYMBOL_GPL(ata_pci_device_resume
);
7170 #endif /* CONFIG_PM */
7171 EXPORT_SYMBOL_GPL(ata_pci_default_filter
);
7172 EXPORT_SYMBOL_GPL(ata_pci_clear_simplex
);
7173 #endif /* CONFIG_PCI */
7175 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc
);
7176 EXPORT_SYMBOL_GPL(ata_ehi_push_desc
);
7177 EXPORT_SYMBOL_GPL(ata_ehi_clear_desc
);
7178 EXPORT_SYMBOL_GPL(ata_port_desc
);
7180 EXPORT_SYMBOL_GPL(ata_port_pbar_desc
);
7181 #endif /* CONFIG_PCI */
7182 EXPORT_SYMBOL_GPL(ata_eng_timeout
);
7183 EXPORT_SYMBOL_GPL(ata_port_schedule_eh
);
7184 EXPORT_SYMBOL_GPL(ata_link_abort
);
7185 EXPORT_SYMBOL_GPL(ata_port_abort
);
7186 EXPORT_SYMBOL_GPL(ata_port_freeze
);
7187 EXPORT_SYMBOL_GPL(ata_eh_freeze_port
);
7188 EXPORT_SYMBOL_GPL(ata_eh_thaw_port
);
7189 EXPORT_SYMBOL_GPL(ata_eh_qc_complete
);
7190 EXPORT_SYMBOL_GPL(ata_eh_qc_retry
);
7191 EXPORT_SYMBOL_GPL(ata_do_eh
);
7192 EXPORT_SYMBOL_GPL(ata_irq_on
);
7193 EXPORT_SYMBOL_GPL(ata_dev_try_classify
);
7195 EXPORT_SYMBOL_GPL(ata_cable_40wire
);
7196 EXPORT_SYMBOL_GPL(ata_cable_80wire
);
7197 EXPORT_SYMBOL_GPL(ata_cable_unknown
);
7198 EXPORT_SYMBOL_GPL(ata_cable_sata
);