[XFRM]: beet: fix IP option encapsulation
[linux-2.6/zen-sources.git] / drivers / pci / probe.c
bloba4a96826d9e0e9a31057aa920bc4b9fd72683d0d
1 /*
2 * probe.c - PCI detection and setup code
3 */
5 #include <linux/kernel.h>
6 #include <linux/delay.h>
7 #include <linux/init.h>
8 #include <linux/pci.h>
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/cpumask.h>
12 #include "pci.h"
14 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
15 #define CARDBUS_RESERVE_BUSNR 3
16 #define PCI_CFG_SPACE_SIZE 256
17 #define PCI_CFG_SPACE_EXP_SIZE 4096
19 /* Ugh. Need to stop exporting this to modules. */
20 LIST_HEAD(pci_root_buses);
21 EXPORT_SYMBOL(pci_root_buses);
23 LIST_HEAD(pci_devices);
25 #ifdef HAVE_PCI_LEGACY
26 /**
27 * pci_create_legacy_files - create legacy I/O port and memory files
28 * @b: bus to create files under
30 * Some platforms allow access to legacy I/O port and ISA memory space on
31 * a per-bus basis. This routine creates the files and ties them into
32 * their associated read, write and mmap files from pci-sysfs.c
34 static void pci_create_legacy_files(struct pci_bus *b)
36 b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
37 GFP_ATOMIC);
38 if (b->legacy_io) {
39 b->legacy_io->attr.name = "legacy_io";
40 b->legacy_io->size = 0xffff;
41 b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
42 b->legacy_io->attr.owner = THIS_MODULE;
43 b->legacy_io->read = pci_read_legacy_io;
44 b->legacy_io->write = pci_write_legacy_io;
45 class_device_create_bin_file(&b->class_dev, b->legacy_io);
47 /* Allocated above after the legacy_io struct */
48 b->legacy_mem = b->legacy_io + 1;
49 b->legacy_mem->attr.name = "legacy_mem";
50 b->legacy_mem->size = 1024*1024;
51 b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
52 b->legacy_mem->attr.owner = THIS_MODULE;
53 b->legacy_mem->mmap = pci_mmap_legacy_mem;
54 class_device_create_bin_file(&b->class_dev, b->legacy_mem);
58 void pci_remove_legacy_files(struct pci_bus *b)
60 if (b->legacy_io) {
61 class_device_remove_bin_file(&b->class_dev, b->legacy_io);
62 class_device_remove_bin_file(&b->class_dev, b->legacy_mem);
63 kfree(b->legacy_io); /* both are allocated here */
66 #else /* !HAVE_PCI_LEGACY */
67 static inline void pci_create_legacy_files(struct pci_bus *bus) { return; }
68 void pci_remove_legacy_files(struct pci_bus *bus) { return; }
69 #endif /* HAVE_PCI_LEGACY */
72 * PCI Bus Class Devices
74 static ssize_t pci_bus_show_cpuaffinity(struct class_device *class_dev,
75 char *buf)
77 int ret;
78 cpumask_t cpumask;
80 cpumask = pcibus_to_cpumask(to_pci_bus(class_dev));
81 ret = cpumask_scnprintf(buf, PAGE_SIZE, cpumask);
82 if (ret < PAGE_SIZE)
83 buf[ret++] = '\n';
84 return ret;
86 CLASS_DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpuaffinity, NULL);
89 * PCI Bus Class
91 static void release_pcibus_dev(struct class_device *class_dev)
93 struct pci_bus *pci_bus = to_pci_bus(class_dev);
95 if (pci_bus->bridge)
96 put_device(pci_bus->bridge);
97 kfree(pci_bus);
100 static struct class pcibus_class = {
101 .name = "pci_bus",
102 .release = &release_pcibus_dev,
105 static int __init pcibus_class_init(void)
107 return class_register(&pcibus_class);
109 postcore_initcall(pcibus_class_init);
112 * Translate the low bits of the PCI base
113 * to the resource type
115 static inline unsigned int pci_calc_resource_flags(unsigned int flags)
117 if (flags & PCI_BASE_ADDRESS_SPACE_IO)
118 return IORESOURCE_IO;
120 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
121 return IORESOURCE_MEM | IORESOURCE_PREFETCH;
123 return IORESOURCE_MEM;
127 * Find the extent of a PCI decode..
129 static u32 pci_size(u32 base, u32 maxbase, u32 mask)
131 u32 size = mask & maxbase; /* Find the significant bits */
132 if (!size)
133 return 0;
135 /* Get the lowest of them to find the decode size, and
136 from that the extent. */
137 size = (size & ~(size-1)) - 1;
139 /* base == maxbase can be valid only if the BAR has
140 already been programmed with all 1s. */
141 if (base == maxbase && ((base | size) & mask) != mask)
142 return 0;
144 return size;
147 static u64 pci_size64(u64 base, u64 maxbase, u64 mask)
149 u64 size = mask & maxbase; /* Find the significant bits */
150 if (!size)
151 return 0;
153 /* Get the lowest of them to find the decode size, and
154 from that the extent. */
155 size = (size & ~(size-1)) - 1;
157 /* base == maxbase can be valid only if the BAR has
158 already been programmed with all 1s. */
159 if (base == maxbase && ((base | size) & mask) != mask)
160 return 0;
162 return size;
165 static inline int is_64bit_memory(u32 mask)
167 if ((mask & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
168 (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
169 return 1;
170 return 0;
173 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
175 unsigned int pos, reg, next;
176 u32 l, sz;
177 struct resource *res;
179 for(pos=0; pos<howmany; pos = next) {
180 u64 l64;
181 u64 sz64;
182 u32 raw_sz;
184 next = pos+1;
185 res = &dev->resource[pos];
186 res->name = pci_name(dev);
187 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
188 pci_read_config_dword(dev, reg, &l);
189 pci_write_config_dword(dev, reg, ~0);
190 pci_read_config_dword(dev, reg, &sz);
191 pci_write_config_dword(dev, reg, l);
192 if (!sz || sz == 0xffffffff)
193 continue;
194 if (l == 0xffffffff)
195 l = 0;
196 raw_sz = sz;
197 if ((l & PCI_BASE_ADDRESS_SPACE) ==
198 PCI_BASE_ADDRESS_SPACE_MEMORY) {
199 sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
201 * For 64bit prefetchable memory sz could be 0, if the
202 * real size is bigger than 4G, so we need to check
203 * szhi for that.
205 if (!is_64bit_memory(l) && !sz)
206 continue;
207 res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
208 res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
209 } else {
210 sz = pci_size(l, sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
211 if (!sz)
212 continue;
213 res->start = l & PCI_BASE_ADDRESS_IO_MASK;
214 res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
216 res->end = res->start + (unsigned long) sz;
217 res->flags |= pci_calc_resource_flags(l);
218 if (is_64bit_memory(l)) {
219 u32 szhi, lhi;
221 pci_read_config_dword(dev, reg+4, &lhi);
222 pci_write_config_dword(dev, reg+4, ~0);
223 pci_read_config_dword(dev, reg+4, &szhi);
224 pci_write_config_dword(dev, reg+4, lhi);
225 sz64 = ((u64)szhi << 32) | raw_sz;
226 l64 = ((u64)lhi << 32) | l;
227 sz64 = pci_size64(l64, sz64, PCI_BASE_ADDRESS_MEM_MASK);
228 next++;
229 #if BITS_PER_LONG == 64
230 if (!sz64) {
231 res->start = 0;
232 res->end = 0;
233 res->flags = 0;
234 continue;
236 res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
237 res->end = res->start + sz64;
238 #else
239 if (sz64 > 0x100000000ULL) {
240 printk(KERN_ERR "PCI: Unable to handle 64-bit "
241 "BAR for device %s\n", pci_name(dev));
242 res->start = 0;
243 res->flags = 0;
244 } else if (lhi) {
245 /* 64-bit wide address, treat as disabled */
246 pci_write_config_dword(dev, reg,
247 l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
248 pci_write_config_dword(dev, reg+4, 0);
249 res->start = 0;
250 res->end = sz;
252 #endif
255 if (rom) {
256 dev->rom_base_reg = rom;
257 res = &dev->resource[PCI_ROM_RESOURCE];
258 res->name = pci_name(dev);
259 pci_read_config_dword(dev, rom, &l);
260 pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
261 pci_read_config_dword(dev, rom, &sz);
262 pci_write_config_dword(dev, rom, l);
263 if (l == 0xffffffff)
264 l = 0;
265 if (sz && sz != 0xffffffff) {
266 sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
267 if (sz) {
268 res->flags = (l & IORESOURCE_ROM_ENABLE) |
269 IORESOURCE_MEM | IORESOURCE_PREFETCH |
270 IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
271 res->start = l & PCI_ROM_ADDRESS_MASK;
272 res->end = res->start + (unsigned long) sz;
278 void __devinit pci_read_bridge_bases(struct pci_bus *child)
280 struct pci_dev *dev = child->self;
281 u8 io_base_lo, io_limit_lo;
282 u16 mem_base_lo, mem_limit_lo;
283 unsigned long base, limit;
284 struct resource *res;
285 int i;
287 if (!dev) /* It's a host bus, nothing to read */
288 return;
290 if (dev->transparent) {
291 printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
292 for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
293 child->resource[i] = child->parent->resource[i - 3];
296 for(i=0; i<3; i++)
297 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
299 res = child->resource[0];
300 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
301 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
302 base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
303 limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
305 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
306 u16 io_base_hi, io_limit_hi;
307 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
308 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
309 base |= (io_base_hi << 16);
310 limit |= (io_limit_hi << 16);
313 if (base <= limit) {
314 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
315 if (!res->start)
316 res->start = base;
317 if (!res->end)
318 res->end = limit + 0xfff;
321 res = child->resource[1];
322 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
323 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
324 base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
325 limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
326 if (base <= limit) {
327 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
328 res->start = base;
329 res->end = limit + 0xfffff;
332 res = child->resource[2];
333 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
334 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
335 base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
336 limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
338 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
339 u32 mem_base_hi, mem_limit_hi;
340 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
341 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
344 * Some bridges set the base > limit by default, and some
345 * (broken) BIOSes do not initialize them. If we find
346 * this, just assume they are not being used.
348 if (mem_base_hi <= mem_limit_hi) {
349 #if BITS_PER_LONG == 64
350 base |= ((long) mem_base_hi) << 32;
351 limit |= ((long) mem_limit_hi) << 32;
352 #else
353 if (mem_base_hi || mem_limit_hi) {
354 printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
355 return;
357 #endif
360 if (base <= limit) {
361 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
362 res->start = base;
363 res->end = limit + 0xfffff;
367 static struct pci_bus * __devinit pci_alloc_bus(void)
369 struct pci_bus *b;
371 b = kzalloc(sizeof(*b), GFP_KERNEL);
372 if (b) {
373 INIT_LIST_HEAD(&b->node);
374 INIT_LIST_HEAD(&b->children);
375 INIT_LIST_HEAD(&b->devices);
377 return b;
380 static struct pci_bus * __devinit
381 pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr)
383 struct pci_bus *child;
384 int i;
385 int retval;
388 * Allocate a new bus, and inherit stuff from the parent..
390 child = pci_alloc_bus();
391 if (!child)
392 return NULL;
394 child->self = bridge;
395 child->parent = parent;
396 child->ops = parent->ops;
397 child->sysdata = parent->sysdata;
398 child->bus_flags = parent->bus_flags;
399 child->bridge = get_device(&bridge->dev);
401 child->class_dev.class = &pcibus_class;
402 sprintf(child->class_dev.class_id, "%04x:%02x", pci_domain_nr(child), busnr);
403 retval = class_device_register(&child->class_dev);
404 if (retval)
405 goto error_register;
406 retval = class_device_create_file(&child->class_dev,
407 &class_device_attr_cpuaffinity);
408 if (retval)
409 goto error_file_create;
412 * Set up the primary, secondary and subordinate
413 * bus numbers.
415 child->number = child->secondary = busnr;
416 child->primary = parent->secondary;
417 child->subordinate = 0xff;
419 /* Set up default resource pointers and names.. */
420 for (i = 0; i < 4; i++) {
421 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
422 child->resource[i]->name = child->name;
424 bridge->subordinate = child;
426 return child;
428 error_file_create:
429 class_device_unregister(&child->class_dev);
430 error_register:
431 kfree(child);
432 return NULL;
435 struct pci_bus * __devinit pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
437 struct pci_bus *child;
439 child = pci_alloc_child_bus(parent, dev, busnr);
440 if (child) {
441 down_write(&pci_bus_sem);
442 list_add_tail(&child->node, &parent->children);
443 up_write(&pci_bus_sem);
445 return child;
448 static void pci_enable_crs(struct pci_dev *dev)
450 u16 cap, rpctl;
451 int rpcap = pci_find_capability(dev, PCI_CAP_ID_EXP);
452 if (!rpcap)
453 return;
455 pci_read_config_word(dev, rpcap + PCI_CAP_FLAGS, &cap);
456 if (((cap & PCI_EXP_FLAGS_TYPE) >> 4) != PCI_EXP_TYPE_ROOT_PORT)
457 return;
459 pci_read_config_word(dev, rpcap + PCI_EXP_RTCTL, &rpctl);
460 rpctl |= PCI_EXP_RTCTL_CRSSVE;
461 pci_write_config_word(dev, rpcap + PCI_EXP_RTCTL, rpctl);
464 static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
466 struct pci_bus *parent = child->parent;
468 /* Attempts to fix that up are really dangerous unless
469 we're going to re-assign all bus numbers. */
470 if (!pcibios_assign_all_busses())
471 return;
473 while (parent->parent && parent->subordinate < max) {
474 parent->subordinate = max;
475 pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
476 parent = parent->parent;
480 unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus);
483 * If it's a bridge, configure it and scan the bus behind it.
484 * For CardBus bridges, we don't scan behind as the devices will
485 * be handled by the bridge driver itself.
487 * We need to process bridges in two passes -- first we scan those
488 * already configured by the BIOS and after we are done with all of
489 * them, we proceed to assigning numbers to the remaining buses in
490 * order to avoid overlaps between old and new bus numbers.
492 int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
494 struct pci_bus *child;
495 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
496 u32 buses, i, j = 0;
497 u16 bctl;
499 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
501 pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
502 pci_name(dev), buses & 0xffffff, pass);
504 /* Disable MasterAbortMode during probing to avoid reporting
505 of bus errors (in some architectures) */
506 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
507 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
508 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
510 pci_enable_crs(dev);
512 if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) {
513 unsigned int cmax, busnr;
515 * Bus already configured by firmware, process it in the first
516 * pass and just note the configuration.
518 if (pass)
519 goto out;
520 busnr = (buses >> 8) & 0xFF;
523 * If we already got to this bus through a different bridge,
524 * ignore it. This can happen with the i450NX chipset.
526 if (pci_find_bus(pci_domain_nr(bus), busnr)) {
527 printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
528 pci_domain_nr(bus), busnr);
529 goto out;
532 child = pci_add_new_bus(bus, dev, busnr);
533 if (!child)
534 goto out;
535 child->primary = buses & 0xFF;
536 child->subordinate = (buses >> 16) & 0xFF;
537 child->bridge_ctl = bctl;
539 cmax = pci_scan_child_bus(child);
540 if (cmax > max)
541 max = cmax;
542 if (child->subordinate > max)
543 max = child->subordinate;
544 } else {
546 * We need to assign a number to this bus which we always
547 * do in the second pass.
549 if (!pass) {
550 if (pcibios_assign_all_busses())
551 /* Temporarily disable forwarding of the
552 configuration cycles on all bridges in
553 this bus segment to avoid possible
554 conflicts in the second pass between two
555 bridges programmed with overlapping
556 bus ranges. */
557 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
558 buses & ~0xffffff);
559 goto out;
562 /* Clear errors */
563 pci_write_config_word(dev, PCI_STATUS, 0xffff);
565 /* Prevent assigning a bus number that already exists.
566 * This can happen when a bridge is hot-plugged */
567 if (pci_find_bus(pci_domain_nr(bus), max+1))
568 goto out;
569 child = pci_add_new_bus(bus, dev, ++max);
570 buses = (buses & 0xff000000)
571 | ((unsigned int)(child->primary) << 0)
572 | ((unsigned int)(child->secondary) << 8)
573 | ((unsigned int)(child->subordinate) << 16);
576 * yenta.c forces a secondary latency timer of 176.
577 * Copy that behaviour here.
579 if (is_cardbus) {
580 buses &= ~0xff000000;
581 buses |= CARDBUS_LATENCY_TIMER << 24;
585 * We need to blast all three values with a single write.
587 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
589 if (!is_cardbus) {
590 child->bridge_ctl = bctl | PCI_BRIDGE_CTL_NO_ISA;
592 * Adjust subordinate busnr in parent buses.
593 * We do this before scanning for children because
594 * some devices may not be detected if the bios
595 * was lazy.
597 pci_fixup_parent_subordinate_busnr(child, max);
598 /* Now we can scan all subordinate buses... */
599 max = pci_scan_child_bus(child);
601 * now fix it up again since we have found
602 * the real value of max.
604 pci_fixup_parent_subordinate_busnr(child, max);
605 } else {
607 * For CardBus bridges, we leave 4 bus numbers
608 * as cards with a PCI-to-PCI bridge can be
609 * inserted later.
611 for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
612 struct pci_bus *parent = bus;
613 if (pci_find_bus(pci_domain_nr(bus),
614 max+i+1))
615 break;
616 while (parent->parent) {
617 if ((!pcibios_assign_all_busses()) &&
618 (parent->subordinate > max) &&
619 (parent->subordinate <= max+i)) {
620 j = 1;
622 parent = parent->parent;
624 if (j) {
626 * Often, there are two cardbus bridges
627 * -- try to leave one valid bus number
628 * for each one.
630 i /= 2;
631 break;
634 max += i;
635 pci_fixup_parent_subordinate_busnr(child, max);
638 * Set the subordinate bus number to its real value.
640 child->subordinate = max;
641 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
644 sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
646 while (bus->parent) {
647 if ((child->subordinate > bus->subordinate) ||
648 (child->number > bus->subordinate) ||
649 (child->number < bus->number) ||
650 (child->subordinate < bus->number)) {
651 printk(KERN_WARNING "PCI: Bus #%02x (-#%02x) is "
652 "hidden behind%s bridge #%02x (-#%02x)%s\n",
653 child->number, child->subordinate,
654 bus->self->transparent ? " transparent" : " ",
655 bus->number, bus->subordinate,
656 pcibios_assign_all_busses() ? " " :
657 " (try 'pci=assign-busses')");
658 printk(KERN_WARNING "Please report the result to "
659 "linux-kernel to fix this permanently\n");
661 bus = bus->parent;
664 out:
665 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
667 return max;
671 * Read interrupt line and base address registers.
672 * The architecture-dependent code can tweak these, of course.
674 static void pci_read_irq(struct pci_dev *dev)
676 unsigned char irq;
678 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
679 dev->pin = irq;
680 if (irq)
681 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
682 dev->irq = irq;
685 static void change_legacy_io_resource(struct pci_dev * dev, unsigned index,
686 unsigned start, unsigned end)
688 unsigned base = start & PCI_BASE_ADDRESS_IO_MASK;
689 unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1;
692 * Some X versions get confused when the BARs reported through
693 * /sys or /proc differ from those seen in config space, thus
694 * try to update the config space values, too.
696 if (!(pci_resource_flags(dev, index) & IORESOURCE_IO))
697 printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n",
698 pci_name(dev), index);
699 else if (pci_resource_len(dev, index) != len)
700 printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n",
701 pci_name(dev), index, (unsigned)pci_resource_len(dev, index));
702 else {
703 printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n",
704 pci_name(dev), index,
705 (unsigned)pci_resource_start(dev, index), base);
706 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base);
708 pci_resource_start(dev, index) = start;
709 pci_resource_end(dev, index) = end;
710 pci_resource_flags(dev, index) =
711 IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO;
715 * pci_setup_device - fill in class and map information of a device
716 * @dev: the device structure to fill
718 * Initialize the device structure with information about the device's
719 * vendor,class,memory and IO-space addresses,IRQ lines etc.
720 * Called at initialisation of the PCI subsystem and by CardBus services.
721 * Returns 0 on success and -1 if unknown type of device (not normal, bridge
722 * or CardBus).
724 static int pci_setup_device(struct pci_dev * dev)
726 u32 class;
728 sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
729 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
731 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
732 class >>= 8; /* upper 3 bytes */
733 dev->class = class;
734 class >>= 8;
736 pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
737 dev->vendor, dev->device, class, dev->hdr_type);
739 /* "Unknown power state" */
740 dev->current_state = PCI_UNKNOWN;
742 /* Early fixups, before probing the BARs */
743 pci_fixup_device(pci_fixup_early, dev);
744 class = dev->class >> 8;
746 switch (dev->hdr_type) { /* header type */
747 case PCI_HEADER_TYPE_NORMAL: /* standard header */
748 if (class == PCI_CLASS_BRIDGE_PCI)
749 goto bad;
750 pci_read_irq(dev);
751 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
752 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
753 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
756 * Do the ugly legacy mode stuff here rather than broken chip
757 * quirk code. Legacy mode ATA controllers have fixed
758 * addresses. These are not always echoed in BAR0-3, and
759 * BAR0-3 in a few cases contain junk!
761 if (class == PCI_CLASS_STORAGE_IDE) {
762 u8 progif;
763 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
764 if ((progif & 1) == 0) {
765 change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7);
766 change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6);
768 if ((progif & 4) == 0) {
769 change_legacy_io_resource(dev, 2, 0x170, 0x177);
770 change_legacy_io_resource(dev, 3, 0x376, 0x376);
773 break;
775 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
776 if (class != PCI_CLASS_BRIDGE_PCI)
777 goto bad;
778 /* The PCI-to-PCI bridge spec requires that subtractive
779 decoding (i.e. transparent) bridge must have programming
780 interface code of 0x01. */
781 pci_read_irq(dev);
782 dev->transparent = ((dev->class & 0xff) == 1);
783 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
784 break;
786 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
787 if (class != PCI_CLASS_BRIDGE_CARDBUS)
788 goto bad;
789 pci_read_irq(dev);
790 pci_read_bases(dev, 1, 0);
791 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
792 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
793 break;
795 default: /* unknown header */
796 printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
797 pci_name(dev), dev->hdr_type);
798 return -1;
800 bad:
801 printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
802 pci_name(dev), class, dev->hdr_type);
803 dev->class = PCI_CLASS_NOT_DEFINED;
806 /* We found a fine healthy device, go go go... */
807 return 0;
811 * pci_release_dev - free a pci device structure when all users of it are finished.
812 * @dev: device that's been disconnected
814 * Will be called only by the device core when all users of this pci device are
815 * done.
817 static void pci_release_dev(struct device *dev)
819 struct pci_dev *pci_dev;
821 pci_dev = to_pci_dev(dev);
822 kfree(pci_dev);
826 * pci_cfg_space_size - get the configuration space size of the PCI device.
827 * @dev: PCI device
829 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
830 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
831 * access it. Maybe we don't have a way to generate extended config space
832 * accesses, or the device is behind a reverse Express bridge. So we try
833 * reading the dword at 0x100 which must either be 0 or a valid extended
834 * capability header.
836 int pci_cfg_space_size(struct pci_dev *dev)
838 int pos;
839 u32 status;
841 pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
842 if (!pos) {
843 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
844 if (!pos)
845 goto fail;
847 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
848 if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
849 goto fail;
852 if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
853 goto fail;
854 if (status == 0xffffffff)
855 goto fail;
857 return PCI_CFG_SPACE_EXP_SIZE;
859 fail:
860 return PCI_CFG_SPACE_SIZE;
863 static void pci_release_bus_bridge_dev(struct device *dev)
865 kfree(dev);
869 * Read the config data for a PCI device, sanity-check it
870 * and fill in the dev structure...
872 static struct pci_dev * __devinit
873 pci_scan_device(struct pci_bus *bus, int devfn)
875 struct pci_dev *dev;
876 u32 l;
877 u8 hdr_type;
878 int delay = 1;
880 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
881 return NULL;
883 /* some broken boards return 0 or ~0 if a slot is empty: */
884 if (l == 0xffffffff || l == 0x00000000 ||
885 l == 0x0000ffff || l == 0xffff0000)
886 return NULL;
888 /* Configuration request Retry Status */
889 while (l == 0xffff0001) {
890 msleep(delay);
891 delay *= 2;
892 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
893 return NULL;
894 /* Card hasn't responded in 60 seconds? Must be stuck. */
895 if (delay > 60 * 1000) {
896 printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
897 "responding\n", pci_domain_nr(bus),
898 bus->number, PCI_SLOT(devfn),
899 PCI_FUNC(devfn));
900 return NULL;
904 if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
905 return NULL;
907 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
908 if (!dev)
909 return NULL;
911 dev->bus = bus;
912 dev->sysdata = bus->sysdata;
913 dev->dev.parent = bus->bridge;
914 dev->dev.bus = &pci_bus_type;
915 dev->devfn = devfn;
916 dev->hdr_type = hdr_type & 0x7f;
917 dev->multifunction = !!(hdr_type & 0x80);
918 dev->vendor = l & 0xffff;
919 dev->device = (l >> 16) & 0xffff;
920 dev->cfg_size = pci_cfg_space_size(dev);
921 dev->error_state = pci_channel_io_normal;
923 /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
924 set this higher, assuming the system even supports it. */
925 dev->dma_mask = 0xffffffff;
926 if (pci_setup_device(dev) < 0) {
927 kfree(dev);
928 return NULL;
931 return dev;
934 void __devinit pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
936 device_initialize(&dev->dev);
937 dev->dev.release = pci_release_dev;
938 pci_dev_get(dev);
940 set_dev_node(&dev->dev, pcibus_to_node(bus));
941 dev->dev.dma_mask = &dev->dma_mask;
942 dev->dev.coherent_dma_mask = 0xffffffffull;
944 /* Fix up broken headers */
945 pci_fixup_device(pci_fixup_header, dev);
948 * Add the device to our list of discovered devices
949 * and the bus list for fixup functions, etc.
951 INIT_LIST_HEAD(&dev->global_list);
952 down_write(&pci_bus_sem);
953 list_add_tail(&dev->bus_list, &bus->devices);
954 up_write(&pci_bus_sem);
957 struct pci_dev * __devinit
958 pci_scan_single_device(struct pci_bus *bus, int devfn)
960 struct pci_dev *dev;
962 dev = pci_scan_device(bus, devfn);
963 if (!dev)
964 return NULL;
966 pci_device_add(dev, bus);
968 return dev;
972 * pci_scan_slot - scan a PCI slot on a bus for devices.
973 * @bus: PCI bus to scan
974 * @devfn: slot number to scan (must have zero function.)
976 * Scan a PCI slot on the specified PCI bus for devices, adding
977 * discovered devices to the @bus->devices list. New devices
978 * will have an empty dev->global_list head.
980 int __devinit pci_scan_slot(struct pci_bus *bus, int devfn)
982 int func, nr = 0;
983 int scan_all_fns;
985 scan_all_fns = pcibios_scan_all_fns(bus, devfn);
987 for (func = 0; func < 8; func++, devfn++) {
988 struct pci_dev *dev;
990 dev = pci_scan_single_device(bus, devfn);
991 if (dev) {
992 nr++;
995 * If this is a single function device,
996 * don't scan past the first function.
998 if (!dev->multifunction) {
999 if (func > 0) {
1000 dev->multifunction = 1;
1001 } else {
1002 break;
1005 } else {
1006 if (func == 0 && !scan_all_fns)
1007 break;
1010 return nr;
1013 unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
1015 unsigned int devfn, pass, max = bus->secondary;
1016 struct pci_dev *dev;
1018 pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
1020 /* Go find them, Rover! */
1021 for (devfn = 0; devfn < 0x100; devfn += 8)
1022 pci_scan_slot(bus, devfn);
1025 * After performing arch-dependent fixup of the bus, look behind
1026 * all PCI-to-PCI bridges on this bus.
1028 pr_debug("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
1029 pcibios_fixup_bus(bus);
1030 for (pass=0; pass < 2; pass++)
1031 list_for_each_entry(dev, &bus->devices, bus_list) {
1032 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
1033 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
1034 max = pci_scan_bridge(bus, dev, max, pass);
1038 * We've scanned the bus and so we know all about what's on
1039 * the other side of any bridges that may be on this bus plus
1040 * any devices.
1042 * Return how far we've got finding sub-buses.
1044 pr_debug("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
1045 pci_domain_nr(bus), bus->number, max);
1046 return max;
1049 unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
1051 unsigned int max;
1053 max = pci_scan_child_bus(bus);
1056 * Make the discovered devices available.
1058 pci_bus_add_devices(bus);
1060 return max;
1063 struct pci_bus * __devinit pci_create_bus(struct device *parent,
1064 int bus, struct pci_ops *ops, void *sysdata)
1066 int error;
1067 struct pci_bus *b;
1068 struct device *dev;
1070 b = pci_alloc_bus();
1071 if (!b)
1072 return NULL;
1074 dev = kmalloc(sizeof(*dev), GFP_KERNEL);
1075 if (!dev){
1076 kfree(b);
1077 return NULL;
1080 b->sysdata = sysdata;
1081 b->ops = ops;
1083 if (pci_find_bus(pci_domain_nr(b), bus)) {
1084 /* If we already got to this bus through a different bridge, ignore it */
1085 pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
1086 goto err_out;
1089 down_write(&pci_bus_sem);
1090 list_add_tail(&b->node, &pci_root_buses);
1091 up_write(&pci_bus_sem);
1093 memset(dev, 0, sizeof(*dev));
1094 dev->parent = parent;
1095 dev->release = pci_release_bus_bridge_dev;
1096 sprintf(dev->bus_id, "pci%04x:%02x", pci_domain_nr(b), bus);
1097 error = device_register(dev);
1098 if (error)
1099 goto dev_reg_err;
1100 b->bridge = get_device(dev);
1102 b->class_dev.class = &pcibus_class;
1103 sprintf(b->class_dev.class_id, "%04x:%02x", pci_domain_nr(b), bus);
1104 error = class_device_register(&b->class_dev);
1105 if (error)
1106 goto class_dev_reg_err;
1107 error = class_device_create_file(&b->class_dev, &class_device_attr_cpuaffinity);
1108 if (error)
1109 goto class_dev_create_file_err;
1111 /* Create legacy_io and legacy_mem files for this bus */
1112 pci_create_legacy_files(b);
1114 error = sysfs_create_link(&b->class_dev.kobj, &b->bridge->kobj, "bridge");
1115 if (error)
1116 goto sys_create_link_err;
1118 b->number = b->secondary = bus;
1119 b->resource[0] = &ioport_resource;
1120 b->resource[1] = &iomem_resource;
1122 return b;
1124 sys_create_link_err:
1125 class_device_remove_file(&b->class_dev, &class_device_attr_cpuaffinity);
1126 class_dev_create_file_err:
1127 class_device_unregister(&b->class_dev);
1128 class_dev_reg_err:
1129 device_unregister(dev);
1130 dev_reg_err:
1131 down_write(&pci_bus_sem);
1132 list_del(&b->node);
1133 up_write(&pci_bus_sem);
1134 err_out:
1135 kfree(dev);
1136 kfree(b);
1137 return NULL;
1139 EXPORT_SYMBOL_GPL(pci_create_bus);
1141 struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
1142 int bus, struct pci_ops *ops, void *sysdata)
1144 struct pci_bus *b;
1146 b = pci_create_bus(parent, bus, ops, sysdata);
1147 if (b)
1148 b->subordinate = pci_scan_child_bus(b);
1149 return b;
1151 EXPORT_SYMBOL(pci_scan_bus_parented);
1153 #ifdef CONFIG_HOTPLUG
1154 EXPORT_SYMBOL(pci_add_new_bus);
1155 EXPORT_SYMBOL(pci_do_scan_bus);
1156 EXPORT_SYMBOL(pci_scan_slot);
1157 EXPORT_SYMBOL(pci_scan_bridge);
1158 EXPORT_SYMBOL(pci_scan_single_device);
1159 EXPORT_SYMBOL_GPL(pci_scan_child_bus);
1160 #endif
1162 static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b)
1164 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
1165 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
1167 if (a->bus->number < b->bus->number) return -1;
1168 else if (a->bus->number > b->bus->number) return 1;
1170 if (a->devfn < b->devfn) return -1;
1171 else if (a->devfn > b->devfn) return 1;
1173 return 0;
1177 * Yes, this forcably breaks the klist abstraction temporarily. It
1178 * just wants to sort the klist, not change reference counts and
1179 * take/drop locks rapidly in the process. It does all this while
1180 * holding the lock for the list, so objects can't otherwise be
1181 * added/removed while we're swizzling.
1183 static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list)
1185 struct list_head *pos;
1186 struct klist_node *n;
1187 struct device *dev;
1188 struct pci_dev *b;
1190 list_for_each(pos, list) {
1191 n = container_of(pos, struct klist_node, n_node);
1192 dev = container_of(n, struct device, knode_bus);
1193 b = to_pci_dev(dev);
1194 if (pci_sort_bf_cmp(a, b) <= 0) {
1195 list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node);
1196 return;
1199 list_move_tail(&a->dev.knode_bus.n_node, list);
1202 static void __init pci_sort_breadthfirst_klist(void)
1204 LIST_HEAD(sorted_devices);
1205 struct list_head *pos, *tmp;
1206 struct klist_node *n;
1207 struct device *dev;
1208 struct pci_dev *pdev;
1210 spin_lock(&pci_bus_type.klist_devices.k_lock);
1211 list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) {
1212 n = container_of(pos, struct klist_node, n_node);
1213 dev = container_of(n, struct device, knode_bus);
1214 pdev = to_pci_dev(dev);
1215 pci_insertion_sort_klist(pdev, &sorted_devices);
1217 list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list);
1218 spin_unlock(&pci_bus_type.klist_devices.k_lock);
1221 static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list)
1223 struct pci_dev *b;
1225 list_for_each_entry(b, list, global_list) {
1226 if (pci_sort_bf_cmp(a, b) <= 0) {
1227 list_move_tail(&a->global_list, &b->global_list);
1228 return;
1231 list_move_tail(&a->global_list, list);
1234 static void __init pci_sort_breadthfirst_devices(void)
1236 LIST_HEAD(sorted_devices);
1237 struct pci_dev *dev, *tmp;
1239 down_write(&pci_bus_sem);
1240 list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) {
1241 pci_insertion_sort_devices(dev, &sorted_devices);
1243 list_splice(&sorted_devices, &pci_devices);
1244 up_write(&pci_bus_sem);
1247 void __init pci_sort_breadthfirst(void)
1249 pci_sort_breadthfirst_devices();
1250 pci_sort_breadthfirst_klist();