Driver core: switch firmware_class to uevent_suppress.
[linux-2.6/zen-sources.git] / drivers / char / dtlk.c
blobd8dbdb9162329c62bcb8821547cb70c2c94102ee
1 /* -*- linux-c -*-
2 * dtlk.c - DoubleTalk PC driver for Linux
4 * Original author: Chris Pallotta <chris@allmedia.com>
5 * Current maintainer: Jim Van Zandt <jrv@vanzandt.mv.com>
6 *
7 * 2000-03-18 Jim Van Zandt: Fix polling.
8 * Eliminate dtlk_timer_active flag and separate dtlk_stop_timer
9 * function. Don't restart timer in dtlk_timer_tick. Restart timer
10 * in dtlk_poll after every poll. dtlk_poll returns mask (duh).
11 * Eliminate unused function dtlk_write_byte. Misc. code cleanups.
14 /* This driver is for the DoubleTalk PC, a speech synthesizer
15 manufactured by RC Systems (http://www.rcsys.com/). It was written
16 based on documentation in their User's Manual file and Developer's
17 Tools disk.
19 The DoubleTalk PC contains four voice synthesizers: text-to-speech
20 (TTS), linear predictive coding (LPC), PCM/ADPCM, and CVSD. It
21 also has a tone generator. Output data for LPC are written to the
22 LPC port, and output data for the other modes are written to the
23 TTS port.
25 Two kinds of data can be read from the DoubleTalk: status
26 information (in response to the "\001?" interrogation command) is
27 read from the TTS port, and index markers (which mark the progress
28 of the speech) are read from the LPC port. Not all models of the
29 DoubleTalk PC implement index markers. Both the TTS and LPC ports
30 can also display status flags.
32 The DoubleTalk PC generates no interrupts.
34 These characteristics are mapped into the Unix stream I/O model as
35 follows:
37 "write" sends bytes to the TTS port. It is the responsibility of
38 the user program to switch modes among TTS, PCM/ADPCM, and CVSD.
39 This driver was written for use with the text-to-speech
40 synthesizer. If LPC output is needed some day, other minor device
41 numbers can be used to select among output modes.
43 "read" gets index markers from the LPC port. If the device does
44 not implement index markers, the read will fail with error EINVAL.
46 Status information is available using the DTLK_INTERROGATE ioctl.
50 #include <linux/module.h>
52 #define KERNEL
53 #include <linux/types.h>
54 #include <linux/fs.h>
55 #include <linux/mm.h>
56 #include <linux/errno.h> /* for -EBUSY */
57 #include <linux/ioport.h> /* for request_region */
58 #include <linux/delay.h> /* for loops_per_jiffy */
59 #include <asm/io.h> /* for inb_p, outb_p, inb, outb, etc. */
60 #include <asm/uaccess.h> /* for get_user, etc. */
61 #include <linux/wait.h> /* for wait_queue */
62 #include <linux/init.h> /* for __init, module_{init,exit} */
63 #include <linux/poll.h> /* for POLLIN, etc. */
64 #include <linux/dtlk.h> /* local header file for DoubleTalk values */
65 #include <linux/smp_lock.h>
67 #ifdef TRACING
68 #define TRACE_TEXT(str) printk(str);
69 #define TRACE_RET printk(")")
70 #else /* !TRACING */
71 #define TRACE_TEXT(str) ((void) 0)
72 #define TRACE_RET ((void) 0)
73 #endif /* TRACING */
75 static void dtlk_timer_tick(unsigned long data);
77 static int dtlk_major;
78 static int dtlk_port_lpc;
79 static int dtlk_port_tts;
80 static int dtlk_busy;
81 static int dtlk_has_indexing;
82 static unsigned int dtlk_portlist[] =
83 {0x25e, 0x29e, 0x2de, 0x31e, 0x35e, 0x39e, 0};
84 static wait_queue_head_t dtlk_process_list;
85 static DEFINE_TIMER(dtlk_timer, dtlk_timer_tick, 0, 0);
87 /* prototypes for file_operations struct */
88 static ssize_t dtlk_read(struct file *, char __user *,
89 size_t nbytes, loff_t * ppos);
90 static ssize_t dtlk_write(struct file *, const char __user *,
91 size_t nbytes, loff_t * ppos);
92 static unsigned int dtlk_poll(struct file *, poll_table *);
93 static int dtlk_open(struct inode *, struct file *);
94 static int dtlk_release(struct inode *, struct file *);
95 static int dtlk_ioctl(struct inode *inode, struct file *file,
96 unsigned int cmd, unsigned long arg);
98 static const struct file_operations dtlk_fops =
100 .owner = THIS_MODULE,
101 .read = dtlk_read,
102 .write = dtlk_write,
103 .poll = dtlk_poll,
104 .ioctl = dtlk_ioctl,
105 .open = dtlk_open,
106 .release = dtlk_release,
109 /* local prototypes */
110 static int dtlk_dev_probe(void);
111 static struct dtlk_settings *dtlk_interrogate(void);
112 static int dtlk_readable(void);
113 static char dtlk_read_lpc(void);
114 static char dtlk_read_tts(void);
115 static int dtlk_writeable(void);
116 static char dtlk_write_bytes(const char *buf, int n);
117 static char dtlk_write_tts(char);
119 static void dtlk_handle_error(char, char, unsigned int);
122 static ssize_t dtlk_read(struct file *file, char __user *buf,
123 size_t count, loff_t * ppos)
125 unsigned int minor = iminor(file->f_path.dentry->d_inode);
126 char ch;
127 int i = 0, retries;
129 TRACE_TEXT("(dtlk_read");
130 /* printk("DoubleTalk PC - dtlk_read()\n"); */
132 if (minor != DTLK_MINOR || !dtlk_has_indexing)
133 return -EINVAL;
135 for (retries = 0; retries < loops_per_jiffy; retries++) {
136 while (i < count && dtlk_readable()) {
137 ch = dtlk_read_lpc();
138 /* printk("dtlk_read() reads 0x%02x\n", ch); */
139 if (put_user(ch, buf++))
140 return -EFAULT;
141 i++;
143 if (i)
144 return i;
145 if (file->f_flags & O_NONBLOCK)
146 break;
147 msleep_interruptible(100);
149 if (retries == loops_per_jiffy)
150 printk(KERN_ERR "dtlk_read times out\n");
151 TRACE_RET;
152 return -EAGAIN;
155 static ssize_t dtlk_write(struct file *file, const char __user *buf,
156 size_t count, loff_t * ppos)
158 int i = 0, retries = 0, ch;
160 TRACE_TEXT("(dtlk_write");
161 #ifdef TRACING
162 printk(" \"");
164 int i, ch;
165 for (i = 0; i < count; i++) {
166 if (get_user(ch, buf + i))
167 return -EFAULT;
168 if (' ' <= ch && ch <= '~')
169 printk("%c", ch);
170 else
171 printk("\\%03o", ch);
173 printk("\"");
175 #endif
177 if (iminor(file->f_path.dentry->d_inode) != DTLK_MINOR)
178 return -EINVAL;
180 while (1) {
181 while (i < count && !get_user(ch, buf) &&
182 (ch == DTLK_CLEAR || dtlk_writeable())) {
183 dtlk_write_tts(ch);
184 buf++;
185 i++;
186 if (i % 5 == 0)
187 /* We yield our time until scheduled
188 again. This reduces the transfer
189 rate to 500 bytes/sec, but that's
190 still enough to keep up with the
191 speech synthesizer. */
192 msleep_interruptible(1);
193 else {
194 /* the RDY bit goes zero 2-3 usec
195 after writing, and goes 1 again
196 180-190 usec later. Here, we wait
197 up to 250 usec for the RDY bit to
198 go nonzero. */
199 for (retries = 0;
200 retries < loops_per_jiffy / (4000/HZ);
201 retries++)
202 if (inb_p(dtlk_port_tts) &
203 TTS_WRITABLE)
204 break;
206 retries = 0;
208 if (i == count)
209 return i;
210 if (file->f_flags & O_NONBLOCK)
211 break;
213 msleep_interruptible(1);
215 if (++retries > 10 * HZ) { /* wait no more than 10 sec
216 from last write */
217 printk("dtlk: write timeout. "
218 "inb_p(dtlk_port_tts) = 0x%02x\n",
219 inb_p(dtlk_port_tts));
220 TRACE_RET;
221 return -EBUSY;
224 TRACE_RET;
225 return -EAGAIN;
228 static unsigned int dtlk_poll(struct file *file, poll_table * wait)
230 int mask = 0;
231 unsigned long expires;
233 TRACE_TEXT(" dtlk_poll");
235 static long int j;
236 printk(".");
237 printk("<%ld>", jiffies-j);
238 j=jiffies;
240 poll_wait(file, &dtlk_process_list, wait);
242 if (dtlk_has_indexing && dtlk_readable()) {
243 del_timer(&dtlk_timer);
244 mask = POLLIN | POLLRDNORM;
246 if (dtlk_writeable()) {
247 del_timer(&dtlk_timer);
248 mask |= POLLOUT | POLLWRNORM;
250 /* there are no exception conditions */
252 /* There won't be any interrupts, so we set a timer instead. */
253 expires = jiffies + 3*HZ / 100;
254 mod_timer(&dtlk_timer, expires);
256 return mask;
259 static void dtlk_timer_tick(unsigned long data)
261 TRACE_TEXT(" dtlk_timer_tick");
262 wake_up_interruptible(&dtlk_process_list);
265 static int dtlk_ioctl(struct inode *inode,
266 struct file *file,
267 unsigned int cmd,
268 unsigned long arg)
270 char __user *argp = (char __user *)arg;
271 struct dtlk_settings *sp;
272 char portval;
273 TRACE_TEXT(" dtlk_ioctl");
275 switch (cmd) {
277 case DTLK_INTERROGATE:
278 sp = dtlk_interrogate();
279 if (copy_to_user(argp, sp, sizeof(struct dtlk_settings)))
280 return -EINVAL;
281 return 0;
283 case DTLK_STATUS:
284 portval = inb_p(dtlk_port_tts);
285 return put_user(portval, argp);
287 default:
288 return -EINVAL;
292 static int dtlk_open(struct inode *inode, struct file *file)
294 TRACE_TEXT("(dtlk_open");
296 nonseekable_open(inode, file);
297 switch (iminor(inode)) {
298 case DTLK_MINOR:
299 if (dtlk_busy)
300 return -EBUSY;
301 return nonseekable_open(inode, file);
303 default:
304 return -ENXIO;
308 static int dtlk_release(struct inode *inode, struct file *file)
310 TRACE_TEXT("(dtlk_release");
312 switch (iminor(inode)) {
313 case DTLK_MINOR:
314 break;
316 default:
317 break;
319 TRACE_RET;
321 del_timer_sync(&dtlk_timer);
323 return 0;
326 static int __init dtlk_init(void)
328 dtlk_port_lpc = 0;
329 dtlk_port_tts = 0;
330 dtlk_busy = 0;
331 dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops);
332 if (dtlk_major == 0) {
333 printk(KERN_ERR "DoubleTalk PC - cannot register device\n");
334 return 0;
336 if (dtlk_dev_probe() == 0)
337 printk(", MAJOR %d\n", dtlk_major);
339 init_waitqueue_head(&dtlk_process_list);
341 return 0;
344 static void __exit dtlk_cleanup (void)
346 dtlk_write_bytes("goodbye", 8);
347 msleep_interruptible(500); /* nap 0.50 sec but
348 could be awakened
349 earlier by
350 signals... */
352 dtlk_write_tts(DTLK_CLEAR);
353 unregister_chrdev(dtlk_major, "dtlk");
354 release_region(dtlk_port_lpc, DTLK_IO_EXTENT);
357 module_init(dtlk_init);
358 module_exit(dtlk_cleanup);
360 /* ------------------------------------------------------------------------ */
362 static int dtlk_readable(void)
364 #ifdef TRACING
365 printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies);
366 #endif
367 return inb_p(dtlk_port_lpc) != 0x7f;
370 static int dtlk_writeable(void)
372 /* TRACE_TEXT(" dtlk_writeable"); */
373 #ifdef TRACINGMORE
374 printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0);
375 #endif
376 return inb_p(dtlk_port_tts) & TTS_WRITABLE;
379 static int __init dtlk_dev_probe(void)
381 unsigned int testval = 0;
382 int i = 0;
383 struct dtlk_settings *sp;
385 if (dtlk_port_lpc | dtlk_port_tts)
386 return -EBUSY;
388 for (i = 0; dtlk_portlist[i]; i++) {
389 #if 0
390 printk("DoubleTalk PC - Port %03x = %04x\n",
391 dtlk_portlist[i], (testval = inw_p(dtlk_portlist[i])));
392 #endif
394 if (!request_region(dtlk_portlist[i], DTLK_IO_EXTENT,
395 "dtlk"))
396 continue;
397 testval = inw_p(dtlk_portlist[i]);
398 if ((testval &= 0xfbff) == 0x107f) {
399 dtlk_port_lpc = dtlk_portlist[i];
400 dtlk_port_tts = dtlk_port_lpc + 1;
402 sp = dtlk_interrogate();
403 printk("DoubleTalk PC at %03x-%03x, "
404 "ROM version %s, serial number %u",
405 dtlk_portlist[i], dtlk_portlist[i] +
406 DTLK_IO_EXTENT - 1,
407 sp->rom_version, sp->serial_number);
409 /* put LPC port into known state, so
410 dtlk_readable() gives valid result */
411 outb_p(0xff, dtlk_port_lpc);
413 /* INIT string and index marker */
414 dtlk_write_bytes("\036\1@\0\0012I\r", 8);
415 /* posting an index takes 18 msec. Here, we
416 wait up to 100 msec to see whether it
417 appears. */
418 msleep_interruptible(100);
419 dtlk_has_indexing = dtlk_readable();
420 #ifdef TRACING
421 printk(", indexing %d\n", dtlk_has_indexing);
422 #endif
423 #ifdef INSCOPE
425 /* This macro records ten samples read from the LPC port, for later display */
426 #define LOOK \
427 for (i = 0; i < 10; i++) \
429 buffer[b++] = inb_p(dtlk_port_lpc); \
430 __delay(loops_per_jiffy/(1000000/HZ)); \
432 char buffer[1000];
433 int b = 0, i, j;
435 LOOK
436 outb_p(0xff, dtlk_port_lpc);
437 buffer[b++] = 0;
438 LOOK
439 dtlk_write_bytes("\0012I\r", 4);
440 buffer[b++] = 0;
441 __delay(50 * loops_per_jiffy / (1000/HZ));
442 outb_p(0xff, dtlk_port_lpc);
443 buffer[b++] = 0;
444 LOOK
446 printk("\n");
447 for (j = 0; j < b; j++)
448 printk(" %02x", buffer[j]);
449 printk("\n");
451 #endif /* INSCOPE */
453 #ifdef OUTSCOPE
455 /* This macro records ten samples read from the TTS port, for later display */
456 #define LOOK \
457 for (i = 0; i < 10; i++) \
459 buffer[b++] = inb_p(dtlk_port_tts); \
460 __delay(loops_per_jiffy/(1000000/HZ)); /* 1 us */ \
462 char buffer[1000];
463 int b = 0, i, j;
465 mdelay(10); /* 10 ms */
466 LOOK
467 outb_p(0x03, dtlk_port_tts);
468 buffer[b++] = 0;
469 LOOK
470 LOOK
472 printk("\n");
473 for (j = 0; j < b; j++)
474 printk(" %02x", buffer[j]);
475 printk("\n");
477 #endif /* OUTSCOPE */
479 dtlk_write_bytes("Double Talk found", 18);
481 return 0;
483 release_region(dtlk_portlist[i], DTLK_IO_EXTENT);
486 printk(KERN_INFO "DoubleTalk PC - not found\n");
487 return -ENODEV;
491 static void dtlk_handle_error(char op, char rc, unsigned int minor)
493 printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n",
494 minor, op, rc);
495 return;
499 /* interrogate the DoubleTalk PC and return its settings */
500 static struct dtlk_settings *dtlk_interrogate(void)
502 unsigned char *t;
503 static char buf[sizeof(struct dtlk_settings) + 1];
504 int total, i;
505 static struct dtlk_settings status;
506 TRACE_TEXT("(dtlk_interrogate");
507 dtlk_write_bytes("\030\001?", 3);
508 for (total = 0, i = 0; i < 50; i++) {
509 buf[total] = dtlk_read_tts();
510 if (total > 2 && buf[total] == 0x7f)
511 break;
512 if (total < sizeof(struct dtlk_settings))
513 total++;
516 if (i==50) printk("interrogate() read overrun\n");
517 for (i=0; i<sizeof(buf); i++)
518 printk(" %02x", buf[i]);
519 printk("\n");
521 t = buf;
522 status.serial_number = t[0] + t[1] * 256; /* serial number is
523 little endian */
524 t += 2;
526 i = 0;
527 while (*t != '\r') {
528 status.rom_version[i] = *t;
529 if (i < sizeof(status.rom_version) - 1)
530 i++;
531 t++;
533 status.rom_version[i] = 0;
534 t++;
536 status.mode = *t++;
537 status.punc_level = *t++;
538 status.formant_freq = *t++;
539 status.pitch = *t++;
540 status.speed = *t++;
541 status.volume = *t++;
542 status.tone = *t++;
543 status.expression = *t++;
544 status.ext_dict_loaded = *t++;
545 status.ext_dict_status = *t++;
546 status.free_ram = *t++;
547 status.articulation = *t++;
548 status.reverb = *t++;
549 status.eob = *t++;
550 status.has_indexing = dtlk_has_indexing;
551 TRACE_RET;
552 return &status;
555 static char dtlk_read_tts(void)
557 int portval, retries = 0;
558 char ch;
559 TRACE_TEXT("(dtlk_read_tts");
561 /* verify DT is ready, read char, wait for ACK */
562 do {
563 portval = inb_p(dtlk_port_tts);
564 } while ((portval & TTS_READABLE) == 0 &&
565 retries++ < DTLK_MAX_RETRIES);
566 if (retries == DTLK_MAX_RETRIES)
567 printk(KERN_ERR "dtlk_read_tts() timeout\n");
569 ch = inb_p(dtlk_port_tts); /* input from TTS port */
570 ch &= 0x7f;
571 outb_p(ch, dtlk_port_tts);
573 retries = 0;
574 do {
575 portval = inb_p(dtlk_port_tts);
576 } while ((portval & TTS_READABLE) != 0 &&
577 retries++ < DTLK_MAX_RETRIES);
578 if (retries == DTLK_MAX_RETRIES)
579 printk(KERN_ERR "dtlk_read_tts() timeout\n");
581 TRACE_RET;
582 return ch;
585 static char dtlk_read_lpc(void)
587 int retries = 0;
588 char ch;
589 TRACE_TEXT("(dtlk_read_lpc");
591 /* no need to test -- this is only called when the port is readable */
593 ch = inb_p(dtlk_port_lpc); /* input from LPC port */
595 outb_p(0xff, dtlk_port_lpc);
597 /* acknowledging a read takes 3-4
598 usec. Here, we wait up to 20 usec
599 for the acknowledgement */
600 retries = (loops_per_jiffy * 20) / (1000000/HZ);
601 while (inb_p(dtlk_port_lpc) != 0x7f && --retries > 0);
602 if (retries == 0)
603 printk(KERN_ERR "dtlk_read_lpc() timeout\n");
605 TRACE_RET;
606 return ch;
609 /* write n bytes to tts port */
610 static char dtlk_write_bytes(const char *buf, int n)
612 char val = 0;
613 /* printk("dtlk_write_bytes(\"%-*s\", %d)\n", n, buf, n); */
614 TRACE_TEXT("(dtlk_write_bytes");
615 while (n-- > 0)
616 val = dtlk_write_tts(*buf++);
617 TRACE_RET;
618 return val;
621 static char dtlk_write_tts(char ch)
623 int retries = 0;
624 #ifdef TRACINGMORE
625 printk(" dtlk_write_tts(");
626 if (' ' <= ch && ch <= '~')
627 printk("'%c'", ch);
628 else
629 printk("0x%02x", ch);
630 #endif
631 if (ch != DTLK_CLEAR) /* no flow control for CLEAR command */
632 while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 &&
633 retries++ < DTLK_MAX_RETRIES) /* DT ready? */
635 if (retries == DTLK_MAX_RETRIES)
636 printk(KERN_ERR "dtlk_write_tts() timeout\n");
638 outb_p(ch, dtlk_port_tts); /* output to TTS port */
639 /* the RDY bit goes zero 2-3 usec after writing, and goes
640 1 again 180-190 usec later. Here, we wait up to 10
641 usec for the RDY bit to go zero. */
642 for (retries = 0; retries < loops_per_jiffy / (100000/HZ); retries++)
643 if ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0)
644 break;
646 #ifdef TRACINGMORE
647 printk(")\n");
648 #endif
649 return 0;
652 MODULE_LICENSE("GPL");