2 ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
4 Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23
5 based on lm75.c by Frodo Looijaard <frodol@dds.nl>
6 Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
7 the help of Jean Delvare <khali@linux-fr.org>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
36 /* Addresses to scan */
37 static const unsigned short normal_i2c
[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
38 0x4d, 0x4e, 0x4f, I2C_CLIENT_END
};
40 /* Insmod parameters */
41 I2C_CLIENT_INSMOD_1(ds1621
);
42 static int polarity
= -1;
43 module_param(polarity
, int, 0);
44 MODULE_PARM_DESC(polarity
, "Output's polarity: 0 = active high, 1 = active low");
46 /* Many DS1621 constants specified below */
47 /* Config register used for detection */
49 /* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */
50 #define DS1621_REG_CONFIG_NVB 0x10
51 #define DS1621_REG_CONFIG_POLARITY 0x02
52 #define DS1621_REG_CONFIG_1SHOT 0x01
53 #define DS1621_REG_CONFIG_DONE 0x80
55 /* The DS1621 registers */
56 static const u8 DS1621_REG_TEMP
[3] = {
57 0xAA, /* input, word, RO */
58 0xA2, /* min, word, RW */
59 0xA1, /* max, word, RW */
61 #define DS1621_REG_CONF 0xAC /* byte, RW */
62 #define DS1621_COM_START 0xEE /* no data */
63 #define DS1621_COM_STOP 0x22 /* no data */
65 /* The DS1621 configuration register */
66 #define DS1621_ALARM_TEMP_HIGH 0x40
67 #define DS1621_ALARM_TEMP_LOW 0x20
70 #define ALARMS_FROM_REG(val) ((val) & \
71 (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
73 /* Each client has this additional data */
75 struct i2c_client client
;
76 struct device
*hwmon_dev
;
77 struct mutex update_lock
;
78 char valid
; /* !=0 if following fields are valid */
79 unsigned long last_updated
; /* In jiffies */
81 u16 temp
[3]; /* Register values, word */
82 u8 conf
; /* Register encoding, combined */
85 static int ds1621_attach_adapter(struct i2c_adapter
*adapter
);
86 static int ds1621_detect(struct i2c_adapter
*adapter
, int address
,
88 static void ds1621_init_client(struct i2c_client
*client
);
89 static int ds1621_detach_client(struct i2c_client
*client
);
90 static struct ds1621_data
*ds1621_update_client(struct device
*dev
);
92 /* This is the driver that will be inserted */
93 static struct i2c_driver ds1621_driver
= {
97 .attach_adapter
= ds1621_attach_adapter
,
98 .detach_client
= ds1621_detach_client
,
101 /* All registers are word-sized, except for the configuration register.
102 DS1621 uses a high-byte first convention, which is exactly opposite to
103 the SMBus standard. */
104 static int ds1621_read_value(struct i2c_client
*client
, u8 reg
)
106 if (reg
== DS1621_REG_CONF
)
107 return i2c_smbus_read_byte_data(client
, reg
);
109 return swab16(i2c_smbus_read_word_data(client
, reg
));
112 static int ds1621_write_value(struct i2c_client
*client
, u8 reg
, u16 value
)
114 if (reg
== DS1621_REG_CONF
)
115 return i2c_smbus_write_byte_data(client
, reg
, value
);
117 return i2c_smbus_write_word_data(client
, reg
, swab16(value
));
120 static void ds1621_init_client(struct i2c_client
*client
)
122 int reg
= ds1621_read_value(client
, DS1621_REG_CONF
);
123 /* switch to continuous conversion mode */
124 reg
&= ~ DS1621_REG_CONFIG_1SHOT
;
126 /* setup output polarity */
128 reg
&= ~DS1621_REG_CONFIG_POLARITY
;
129 else if (polarity
== 1)
130 reg
|= DS1621_REG_CONFIG_POLARITY
;
132 ds1621_write_value(client
, DS1621_REG_CONF
, reg
);
134 /* start conversion */
135 i2c_smbus_write_byte(client
, DS1621_COM_START
);
138 static ssize_t
show_temp(struct device
*dev
, struct device_attribute
*da
,
141 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
142 struct ds1621_data
*data
= ds1621_update_client(dev
);
143 return sprintf(buf
, "%d\n",
144 LM75_TEMP_FROM_REG(data
->temp
[attr
->index
]));
147 static ssize_t
set_temp(struct device
*dev
, struct device_attribute
*da
,
148 const char *buf
, size_t count
)
150 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
151 struct i2c_client
*client
= to_i2c_client(dev
);
152 struct ds1621_data
*data
= ds1621_update_client(dev
);
153 u16 val
= LM75_TEMP_TO_REG(simple_strtol(buf
, NULL
, 10));
155 mutex_lock(&data
->update_lock
);
156 data
->temp
[attr
->index
] = val
;
157 ds1621_write_value(client
, DS1621_REG_TEMP
[attr
->index
],
158 data
->temp
[attr
->index
]);
159 mutex_unlock(&data
->update_lock
);
163 static ssize_t
show_alarms(struct device
*dev
, struct device_attribute
*da
,
166 struct ds1621_data
*data
= ds1621_update_client(dev
);
167 return sprintf(buf
, "%d\n", ALARMS_FROM_REG(data
->conf
));
170 static ssize_t
show_alarm(struct device
*dev
, struct device_attribute
*da
,
173 struct sensor_device_attribute
*attr
= to_sensor_dev_attr(da
);
174 struct ds1621_data
*data
= ds1621_update_client(dev
);
175 return sprintf(buf
, "%d\n", !!(data
->conf
& attr
->index
));
178 static DEVICE_ATTR(alarms
, S_IRUGO
, show_alarms
, NULL
);
179 static SENSOR_DEVICE_ATTR(temp1_input
, S_IRUGO
, show_temp
, NULL
, 0);
180 static SENSOR_DEVICE_ATTR(temp1_min
, S_IWUSR
| S_IRUGO
, show_temp
, set_temp
, 1);
181 static SENSOR_DEVICE_ATTR(temp1_max
, S_IWUSR
| S_IRUGO
, show_temp
, set_temp
, 2);
182 static SENSOR_DEVICE_ATTR(temp1_min_alarm
, S_IRUGO
, show_alarm
, NULL
,
183 DS1621_ALARM_TEMP_LOW
);
184 static SENSOR_DEVICE_ATTR(temp1_max_alarm
, S_IRUGO
, show_alarm
, NULL
,
185 DS1621_ALARM_TEMP_HIGH
);
187 static struct attribute
*ds1621_attributes
[] = {
188 &sensor_dev_attr_temp1_input
.dev_attr
.attr
,
189 &sensor_dev_attr_temp1_min
.dev_attr
.attr
,
190 &sensor_dev_attr_temp1_max
.dev_attr
.attr
,
191 &sensor_dev_attr_temp1_min_alarm
.dev_attr
.attr
,
192 &sensor_dev_attr_temp1_max_alarm
.dev_attr
.attr
,
193 &dev_attr_alarms
.attr
,
197 static const struct attribute_group ds1621_group
= {
198 .attrs
= ds1621_attributes
,
202 static int ds1621_attach_adapter(struct i2c_adapter
*adapter
)
204 if (!(adapter
->class & I2C_CLASS_HWMON
))
206 return i2c_probe(adapter
, &addr_data
, ds1621_detect
);
209 /* This function is called by i2c_probe */
210 static int ds1621_detect(struct i2c_adapter
*adapter
, int address
,
214 struct i2c_client
*client
;
215 struct ds1621_data
*data
;
218 if (!i2c_check_functionality(adapter
, I2C_FUNC_SMBUS_BYTE_DATA
219 | I2C_FUNC_SMBUS_WORD_DATA
220 | I2C_FUNC_SMBUS_WRITE_BYTE
))
223 /* OK. For now, we presume we have a valid client. We now create the
224 client structure, even though we cannot fill it completely yet.
225 But it allows us to access ds1621_{read,write}_value. */
226 if (!(data
= kzalloc(sizeof(struct ds1621_data
), GFP_KERNEL
))) {
231 client
= &data
->client
;
232 i2c_set_clientdata(client
, data
);
233 client
->addr
= address
;
234 client
->adapter
= adapter
;
235 client
->driver
= &ds1621_driver
;
237 /* Now, we do the remaining detection. It is lousy. */
239 /* The NVB bit should be low if no EEPROM write has been
240 requested during the latest 10ms, which is highly
241 improbable in our case. */
242 conf
= ds1621_read_value(client
, DS1621_REG_CONF
);
243 if (conf
& DS1621_REG_CONFIG_NVB
)
245 /* The 7 lowest bits of a temperature should always be 0. */
246 for (i
= 0; i
< ARRAY_SIZE(data
->temp
); i
++) {
247 temp
= ds1621_read_value(client
, DS1621_REG_TEMP
[i
]);
253 /* Fill in remaining client fields and put it into the global list */
254 strlcpy(client
->name
, "ds1621", I2C_NAME_SIZE
);
255 mutex_init(&data
->update_lock
);
257 /* Tell the I2C layer a new client has arrived */
258 if ((err
= i2c_attach_client(client
)))
261 /* Initialize the DS1621 chip */
262 ds1621_init_client(client
);
264 /* Register sysfs hooks */
265 if ((err
= sysfs_create_group(&client
->dev
.kobj
, &ds1621_group
)))
268 data
->hwmon_dev
= hwmon_device_register(&client
->dev
);
269 if (IS_ERR(data
->hwmon_dev
)) {
270 err
= PTR_ERR(data
->hwmon_dev
);
271 goto exit_remove_files
;
277 sysfs_remove_group(&client
->dev
.kobj
, &ds1621_group
);
279 i2c_detach_client(client
);
286 static int ds1621_detach_client(struct i2c_client
*client
)
288 struct ds1621_data
*data
= i2c_get_clientdata(client
);
291 hwmon_device_unregister(data
->hwmon_dev
);
292 sysfs_remove_group(&client
->dev
.kobj
, &ds1621_group
);
294 if ((err
= i2c_detach_client(client
)))
303 static struct ds1621_data
*ds1621_update_client(struct device
*dev
)
305 struct i2c_client
*client
= to_i2c_client(dev
);
306 struct ds1621_data
*data
= i2c_get_clientdata(client
);
309 mutex_lock(&data
->update_lock
);
311 if (time_after(jiffies
, data
->last_updated
+ HZ
+ HZ
/ 2)
315 dev_dbg(&client
->dev
, "Starting ds1621 update\n");
317 data
->conf
= ds1621_read_value(client
, DS1621_REG_CONF
);
319 for (i
= 0; i
< ARRAY_SIZE(data
->temp
); i
++)
320 data
->temp
[i
] = ds1621_read_value(client
,
323 /* reset alarms if necessary */
324 new_conf
= data
->conf
;
325 if (data
->temp
[0] > data
->temp
[1]) /* input > min */
326 new_conf
&= ~DS1621_ALARM_TEMP_LOW
;
327 if (data
->temp
[0] < data
->temp
[2]) /* input < max */
328 new_conf
&= ~DS1621_ALARM_TEMP_HIGH
;
329 if (data
->conf
!= new_conf
)
330 ds1621_write_value(client
, DS1621_REG_CONF
,
333 data
->last_updated
= jiffies
;
337 mutex_unlock(&data
->update_lock
);
342 static int __init
ds1621_init(void)
344 return i2c_add_driver(&ds1621_driver
);
347 static void __exit
ds1621_exit(void)
349 i2c_del_driver(&ds1621_driver
);
353 MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
354 MODULE_DESCRIPTION("DS1621 driver");
355 MODULE_LICENSE("GPL");
357 module_init(ds1621_init
);
358 module_exit(ds1621_exit
);