2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
36 #include <linux/kernel.h>
37 #include <linux/mii.h>
38 #include <linux/module.h>
39 #include <linux/netdevice.h>
40 #include <linux/device.h>
41 #include <linux/pci.h>
42 #include <linux/skbuff.h>
43 #include <linux/slab.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <linux/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION
);
61 static int rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_DEFAULT
;
62 static int tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_DEFAULT
;
64 module_param(rx_descriptors
, int, 0444);
65 module_param(tx_descriptors
, int, 0444);
67 MODULE_PARM_DESC(rx_descriptors
, "number of descriptors used " \
69 MODULE_PARM_DESC(tx_descriptors
, "number of descriptors used " \
72 char spider_net_driver_name
[] = "spidernet";
74 static struct pci_device_id spider_net_pci_tbl
[] = {
75 { PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET
,
76 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0UL },
80 MODULE_DEVICE_TABLE(pci
, spider_net_pci_tbl
);
83 * spider_net_read_reg - reads an SMMIO register of a card
84 * @card: device structure
85 * @reg: register to read from
87 * returns the content of the specified SMMIO register.
90 spider_net_read_reg(struct spider_net_card
*card
, u32 reg
)
92 /* We use the powerpc specific variants instead of readl_be() because
93 * we know spidernet is not a real PCI device and we can thus avoid the
94 * performance hit caused by the PCI workarounds.
96 return in_be32(card
->regs
+ reg
);
100 * spider_net_write_reg - writes to an SMMIO register of a card
101 * @card: device structure
102 * @reg: register to write to
103 * @value: value to write into the specified SMMIO register
106 spider_net_write_reg(struct spider_net_card
*card
, u32 reg
, u32 value
)
108 /* We use the powerpc specific variants instead of writel_be() because
109 * we know spidernet is not a real PCI device and we can thus avoid the
110 * performance hit caused by the PCI workarounds.
112 out_be32(card
->regs
+ reg
, value
);
115 /** spider_net_write_phy - write to phy register
116 * @netdev: adapter to be written to
119 * @val: value to be written to phy register
121 * spider_net_write_phy_register writes to an arbitrary PHY
122 * register via the spider GPCWOPCMD register. We assume the queue does
123 * not run full (not more than 15 commands outstanding).
126 spider_net_write_phy(struct net_device
*netdev
, int mii_id
,
129 struct spider_net_card
*card
= netdev_priv(netdev
);
132 writevalue
= ((u32
)mii_id
<< 21) |
133 ((u32
)reg
<< 16) | ((u32
)val
);
135 spider_net_write_reg(card
, SPIDER_NET_GPCWOPCMD
, writevalue
);
138 /** spider_net_read_phy - read from phy register
139 * @netdev: network device to be read from
143 * Returns value read from PHY register
145 * spider_net_write_phy reads from an arbitrary PHY
146 * register via the spider GPCROPCMD register
149 spider_net_read_phy(struct net_device
*netdev
, int mii_id
, int reg
)
151 struct spider_net_card
*card
= netdev_priv(netdev
);
154 readvalue
= ((u32
)mii_id
<< 21) | ((u32
)reg
<< 16);
155 spider_net_write_reg(card
, SPIDER_NET_GPCROPCMD
, readvalue
);
157 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
158 * interrupt, as we poll for the completion of the read operation
159 * in spider_net_read_phy. Should take about 50 us */
161 readvalue
= spider_net_read_reg(card
, SPIDER_NET_GPCROPCMD
);
162 } while (readvalue
& SPIDER_NET_GPREXEC
);
164 readvalue
&= SPIDER_NET_GPRDAT_MASK
;
170 * spider_net_setup_aneg - initial auto-negotiation setup
171 * @card: device structure
174 spider_net_setup_aneg(struct spider_net_card
*card
)
176 struct mii_phy
*phy
= &card
->phy
;
180 bmsr
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
181 estat
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_ESTATUS
);
183 if (bmsr
& BMSR_10HALF
)
184 advertise
|= ADVERTISED_10baseT_Half
;
185 if (bmsr
& BMSR_10FULL
)
186 advertise
|= ADVERTISED_10baseT_Full
;
187 if (bmsr
& BMSR_100HALF
)
188 advertise
|= ADVERTISED_100baseT_Half
;
189 if (bmsr
& BMSR_100FULL
)
190 advertise
|= ADVERTISED_100baseT_Full
;
192 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_TFULL
))
193 advertise
|= SUPPORTED_1000baseT_Full
;
194 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_THALF
))
195 advertise
|= SUPPORTED_1000baseT_Half
;
197 mii_phy_probe(phy
, phy
->mii_id
);
198 phy
->def
->ops
->setup_aneg(phy
, advertise
);
203 * spider_net_rx_irq_off - switch off rx irq on this spider card
204 * @card: device structure
206 * switches off rx irq by masking them out in the GHIINTnMSK register
209 spider_net_rx_irq_off(struct spider_net_card
*card
)
213 regvalue
= SPIDER_NET_INT0_MASK_VALUE
& (~SPIDER_NET_RXINT
);
214 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
218 * spider_net_rx_irq_on - switch on rx irq on this spider card
219 * @card: device structure
221 * switches on rx irq by enabling them in the GHIINTnMSK register
224 spider_net_rx_irq_on(struct spider_net_card
*card
)
228 regvalue
= SPIDER_NET_INT0_MASK_VALUE
| SPIDER_NET_RXINT
;
229 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
233 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
234 * @card: card structure
236 * spider_net_set_promisc sets the unicast destination address filter and
237 * thus either allows for non-promisc mode or promisc mode
240 spider_net_set_promisc(struct spider_net_card
*card
)
243 struct net_device
*netdev
= card
->netdev
;
245 if (netdev
->flags
& IFF_PROMISC
) {
246 /* clear destination entry 0 */
247 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, 0);
248 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, 0);
249 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
250 SPIDER_NET_PROMISC_VALUE
);
252 macu
= netdev
->dev_addr
[0];
254 macu
|= netdev
->dev_addr
[1];
255 memcpy(&macl
, &netdev
->dev_addr
[2], sizeof(macl
));
257 macu
|= SPIDER_NET_UA_DESCR_VALUE
;
258 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, macu
);
259 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, macl
);
260 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
261 SPIDER_NET_NONPROMISC_VALUE
);
266 * spider_net_get_mac_address - read mac address from spider card
267 * @card: device structure
269 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
272 spider_net_get_mac_address(struct net_device
*netdev
)
274 struct spider_net_card
*card
= netdev_priv(netdev
);
277 macl
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACL
);
278 macu
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACU
);
280 netdev
->dev_addr
[0] = (macu
>> 24) & 0xff;
281 netdev
->dev_addr
[1] = (macu
>> 16) & 0xff;
282 netdev
->dev_addr
[2] = (macu
>> 8) & 0xff;
283 netdev
->dev_addr
[3] = macu
& 0xff;
284 netdev
->dev_addr
[4] = (macl
>> 8) & 0xff;
285 netdev
->dev_addr
[5] = macl
& 0xff;
287 if (!is_valid_ether_addr(&netdev
->dev_addr
[0]))
294 * spider_net_get_descr_status -- returns the status of a descriptor
295 * @descr: descriptor to look at
297 * returns the status as in the dmac_cmd_status field of the descriptor
300 spider_net_get_descr_status(struct spider_net_hw_descr
*hwdescr
)
302 return hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_IND_PROC_MASK
;
306 * spider_net_free_chain - free descriptor chain
307 * @card: card structure
308 * @chain: address of chain
312 spider_net_free_chain(struct spider_net_card
*card
,
313 struct spider_net_descr_chain
*chain
)
315 struct spider_net_descr
*descr
;
320 descr
->hwdescr
->next_descr_addr
= 0;
322 } while (descr
!= chain
->ring
);
324 dma_free_coherent(&card
->pdev
->dev
, chain
->num_desc
,
325 chain
->hwring
, chain
->dma_addr
);
329 * spider_net_init_chain - alloc and link descriptor chain
330 * @card: card structure
331 * @chain: address of chain
333 * We manage a circular list that mirrors the hardware structure,
334 * except that the hardware uses bus addresses.
336 * Returns 0 on success, <0 on failure
339 spider_net_init_chain(struct spider_net_card
*card
,
340 struct spider_net_descr_chain
*chain
)
343 struct spider_net_descr
*descr
;
344 struct spider_net_hw_descr
*hwdescr
;
348 alloc_size
= chain
->num_desc
* sizeof(struct spider_net_hw_descr
);
350 chain
->hwring
= dma_alloc_coherent(&card
->pdev
->dev
, alloc_size
,
351 &chain
->dma_addr
, GFP_KERNEL
);
356 memset(chain
->ring
, 0, chain
->num_desc
* sizeof(struct spider_net_descr
));
358 /* Set up the hardware pointers in each descriptor */
360 hwdescr
= chain
->hwring
;
361 buf
= chain
->dma_addr
;
362 for (i
=0; i
< chain
->num_desc
; i
++, descr
++, hwdescr
++) {
363 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
364 hwdescr
->next_descr_addr
= 0;
366 descr
->hwdescr
= hwdescr
;
367 descr
->bus_addr
= buf
;
368 descr
->next
= descr
+ 1;
369 descr
->prev
= descr
- 1;
371 buf
+= sizeof(struct spider_net_hw_descr
);
373 /* do actual circular list */
374 (descr
-1)->next
= chain
->ring
;
375 chain
->ring
->prev
= descr
-1;
377 spin_lock_init(&chain
->lock
);
378 chain
->head
= chain
->ring
;
379 chain
->tail
= chain
->ring
;
384 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
385 * @card: card structure
387 * returns 0 on success, <0 on failure
390 spider_net_free_rx_chain_contents(struct spider_net_card
*card
)
392 struct spider_net_descr
*descr
;
394 descr
= card
->rx_chain
.head
;
397 pci_unmap_single(card
->pdev
, descr
->hwdescr
->buf_addr
,
398 SPIDER_NET_MAX_FRAME
,
399 PCI_DMA_BIDIRECTIONAL
);
400 dev_kfree_skb(descr
->skb
);
404 } while (descr
!= card
->rx_chain
.head
);
408 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
409 * @card: card structure
410 * @descr: descriptor to re-init
412 * Return 0 on succes, <0 on failure.
414 * Allocates a new rx skb, iommu-maps it and attaches it to the
415 * descriptor. Mark the descriptor as activated, ready-to-use.
418 spider_net_prepare_rx_descr(struct spider_net_card
*card
,
419 struct spider_net_descr
*descr
)
421 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
426 /* we need to round up the buffer size to a multiple of 128 */
427 bufsize
= (SPIDER_NET_MAX_FRAME
+ SPIDER_NET_RXBUF_ALIGN
- 1) &
428 (~(SPIDER_NET_RXBUF_ALIGN
- 1));
430 /* and we need to have it 128 byte aligned, therefore we allocate a
432 /* allocate an skb */
433 descr
->skb
= netdev_alloc_skb(card
->netdev
,
434 bufsize
+ SPIDER_NET_RXBUF_ALIGN
- 1);
436 if (netif_msg_rx_err(card
) && net_ratelimit())
437 dev_err(&card
->netdev
->dev
,
438 "Not enough memory to allocate rx buffer\n");
439 card
->spider_stats
.alloc_rx_skb_error
++;
442 hwdescr
->buf_size
= bufsize
;
443 hwdescr
->result_size
= 0;
444 hwdescr
->valid_size
= 0;
445 hwdescr
->data_status
= 0;
446 hwdescr
->data_error
= 0;
448 offset
= ((unsigned long)descr
->skb
->data
) &
449 (SPIDER_NET_RXBUF_ALIGN
- 1);
451 skb_reserve(descr
->skb
, SPIDER_NET_RXBUF_ALIGN
- offset
);
452 /* iommu-map the skb */
453 buf
= pci_map_single(card
->pdev
, descr
->skb
->data
,
454 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
455 if (pci_dma_mapping_error(card
->pdev
, buf
)) {
456 dev_kfree_skb_any(descr
->skb
);
458 if (netif_msg_rx_err(card
) && net_ratelimit())
459 dev_err(&card
->netdev
->dev
, "Could not iommu-map rx buffer\n");
460 card
->spider_stats
.rx_iommu_map_error
++;
461 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
463 hwdescr
->buf_addr
= buf
;
465 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_CARDOWNED
|
466 SPIDER_NET_DMAC_NOINTR_COMPLETE
;
473 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
474 * @card: card structure
476 * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
477 * chip by writing to the appropriate register. DMA is enabled in
478 * spider_net_enable_rxdmac.
481 spider_net_enable_rxchtails(struct spider_net_card
*card
)
483 /* assume chain is aligned correctly */
484 spider_net_write_reg(card
, SPIDER_NET_GDADCHA
,
485 card
->rx_chain
.tail
->bus_addr
);
489 * spider_net_enable_rxdmac - enables a receive DMA controller
490 * @card: card structure
492 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
493 * in the GDADMACCNTR register
496 spider_net_enable_rxdmac(struct spider_net_card
*card
)
499 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
500 SPIDER_NET_DMA_RX_VALUE
);
504 * spider_net_disable_rxdmac - disables the receive DMA controller
505 * @card: card structure
507 * spider_net_disable_rxdmac terminates processing on the DMA controller
508 * by turing off the DMA controller, with the force-end flag set.
511 spider_net_disable_rxdmac(struct spider_net_card
*card
)
513 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
514 SPIDER_NET_DMA_RX_FEND_VALUE
);
518 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
519 * @card: card structure
521 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
524 spider_net_refill_rx_chain(struct spider_net_card
*card
)
526 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
529 /* one context doing the refill (and a second context seeing that
530 * and omitting it) is ok. If called by NAPI, we'll be called again
531 * as spider_net_decode_one_descr is called several times. If some
532 * interrupt calls us, the NAPI is about to clean up anyway. */
533 if (!spin_trylock_irqsave(&chain
->lock
, flags
))
536 while (spider_net_get_descr_status(chain
->head
->hwdescr
) ==
537 SPIDER_NET_DESCR_NOT_IN_USE
) {
538 if (spider_net_prepare_rx_descr(card
, chain
->head
))
540 chain
->head
= chain
->head
->next
;
543 spin_unlock_irqrestore(&chain
->lock
, flags
);
547 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
548 * @card: card structure
550 * Returns 0 on success, <0 on failure.
553 spider_net_alloc_rx_skbs(struct spider_net_card
*card
)
555 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
556 struct spider_net_descr
*start
= chain
->tail
;
557 struct spider_net_descr
*descr
= start
;
559 /* Link up the hardware chain pointers */
561 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
563 } while (descr
!= start
);
565 /* Put at least one buffer into the chain. if this fails,
566 * we've got a problem. If not, spider_net_refill_rx_chain
567 * will do the rest at the end of this function. */
568 if (spider_net_prepare_rx_descr(card
, chain
->head
))
571 chain
->head
= chain
->head
->next
;
573 /* This will allocate the rest of the rx buffers;
574 * if not, it's business as usual later on. */
575 spider_net_refill_rx_chain(card
);
576 spider_net_enable_rxdmac(card
);
580 spider_net_free_rx_chain_contents(card
);
585 * spider_net_get_multicast_hash - generates hash for multicast filter table
586 * @addr: multicast address
588 * returns the hash value.
590 * spider_net_get_multicast_hash calculates a hash value for a given multicast
591 * address, that is used to set the multicast filter tables
594 spider_net_get_multicast_hash(struct net_device
*netdev
, __u8
*addr
)
598 char addr_for_crc
[ETH_ALEN
] = { 0, };
601 for (i
= 0; i
< ETH_ALEN
* 8; i
++) {
602 bit
= (addr
[i
/ 8] >> (i
% 8)) & 1;
603 addr_for_crc
[ETH_ALEN
- 1 - i
/ 8] += bit
<< (7 - (i
% 8));
606 crc
= crc32_be(~0, addr_for_crc
, netdev
->addr_len
);
617 * spider_net_set_multi - sets multicast addresses and promisc flags
618 * @netdev: interface device structure
620 * spider_net_set_multi configures multicast addresses as needed for the
621 * netdev interface. It also sets up multicast, allmulti and promisc
622 * flags appropriately
625 spider_net_set_multi(struct net_device
*netdev
)
627 struct dev_mc_list
*mc
;
631 struct spider_net_card
*card
= netdev_priv(netdev
);
632 unsigned long bitmask
[SPIDER_NET_MULTICAST_HASHES
/ BITS_PER_LONG
] =
635 spider_net_set_promisc(card
);
637 if (netdev
->flags
& IFF_ALLMULTI
) {
638 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
; i
++) {
644 /* well, we know, what the broadcast hash value is: it's xfd
645 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
646 set_bit(0xfd, bitmask
);
648 for (mc
= netdev
->mc_list
; mc
; mc
= mc
->next
) {
649 hash
= spider_net_get_multicast_hash(netdev
, mc
->dmi_addr
);
650 set_bit(hash
, bitmask
);
654 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
/ 4; i
++) {
656 if (test_bit(i
* 4, bitmask
))
659 if (test_bit(i
* 4 + 1, bitmask
))
662 if (test_bit(i
* 4 + 2, bitmask
))
665 if (test_bit(i
* 4 + 3, bitmask
))
668 spider_net_write_reg(card
, SPIDER_NET_GMRMHFILnR
+ i
* 4, reg
);
673 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
674 * @card: card structure
675 * @skb: packet to use
677 * returns 0 on success, <0 on failure.
679 * fills out the descriptor structure with skb data and len. Copies data,
680 * if needed (32bit DMA!)
683 spider_net_prepare_tx_descr(struct spider_net_card
*card
,
686 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
687 struct spider_net_descr
*descr
;
688 struct spider_net_hw_descr
*hwdescr
;
692 buf
= pci_map_single(card
->pdev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
693 if (pci_dma_mapping_error(card
->pdev
, buf
)) {
694 if (netif_msg_tx_err(card
) && net_ratelimit())
695 dev_err(&card
->netdev
->dev
, "could not iommu-map packet (%p, %i). "
696 "Dropping packet\n", skb
->data
, skb
->len
);
697 card
->spider_stats
.tx_iommu_map_error
++;
701 spin_lock_irqsave(&chain
->lock
, flags
);
702 descr
= card
->tx_chain
.head
;
703 if (descr
->next
== chain
->tail
->prev
) {
704 spin_unlock_irqrestore(&chain
->lock
, flags
);
705 pci_unmap_single(card
->pdev
, buf
, skb
->len
, PCI_DMA_TODEVICE
);
708 hwdescr
= descr
->hwdescr
;
709 chain
->head
= descr
->next
;
712 hwdescr
->buf_addr
= buf
;
713 hwdescr
->buf_size
= skb
->len
;
714 hwdescr
->next_descr_addr
= 0;
715 hwdescr
->data_status
= 0;
717 hwdescr
->dmac_cmd_status
=
718 SPIDER_NET_DESCR_CARDOWNED
| SPIDER_NET_DMAC_TXFRMTL
;
719 spin_unlock_irqrestore(&chain
->lock
, flags
);
721 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
722 switch (ip_hdr(skb
)->protocol
) {
724 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_TCP
;
727 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_UDP
;
731 /* Chain the bus address, so that the DMA engine finds this descr. */
733 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
735 card
->netdev
->trans_start
= jiffies
; /* set netdev watchdog timer */
740 spider_net_set_low_watermark(struct spider_net_card
*card
)
742 struct spider_net_descr
*descr
= card
->tx_chain
.tail
;
743 struct spider_net_hw_descr
*hwdescr
;
749 /* Measure the length of the queue. Measurement does not
750 * need to be precise -- does not need a lock. */
751 while (descr
!= card
->tx_chain
.head
) {
752 status
= descr
->hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_NOT_IN_USE
;
753 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
759 /* If TX queue is short, don't even bother with interrupts */
760 if (cnt
< card
->tx_chain
.num_desc
/4)
763 /* Set low-watermark 3/4th's of the way into the queue. */
764 descr
= card
->tx_chain
.tail
;
769 /* Set the new watermark, clear the old watermark */
770 spin_lock_irqsave(&card
->tx_chain
.lock
, flags
);
771 descr
->hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_TXDESFLG
;
772 if (card
->low_watermark
&& card
->low_watermark
!= descr
) {
773 hwdescr
= card
->low_watermark
->hwdescr
;
774 hwdescr
->dmac_cmd_status
=
775 hwdescr
->dmac_cmd_status
& ~SPIDER_NET_DESCR_TXDESFLG
;
777 card
->low_watermark
= descr
;
778 spin_unlock_irqrestore(&card
->tx_chain
.lock
, flags
);
783 * spider_net_release_tx_chain - processes sent tx descriptors
784 * @card: adapter structure
785 * @brutal: if set, don't care about whether descriptor seems to be in use
787 * returns 0 if the tx ring is empty, otherwise 1.
789 * spider_net_release_tx_chain releases the tx descriptors that spider has
790 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
791 * If some other context is calling this function, we return 1 so that we're
792 * scheduled again (if we were scheduled) and will not loose initiative.
795 spider_net_release_tx_chain(struct spider_net_card
*card
, int brutal
)
797 struct net_device
*dev
= card
->netdev
;
798 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
799 struct spider_net_descr
*descr
;
800 struct spider_net_hw_descr
*hwdescr
;
807 spin_lock_irqsave(&chain
->lock
, flags
);
808 if (chain
->tail
== chain
->head
) {
809 spin_unlock_irqrestore(&chain
->lock
, flags
);
813 hwdescr
= descr
->hwdescr
;
815 status
= spider_net_get_descr_status(hwdescr
);
817 case SPIDER_NET_DESCR_COMPLETE
:
818 dev
->stats
.tx_packets
++;
819 dev
->stats
.tx_bytes
+= descr
->skb
->len
;
822 case SPIDER_NET_DESCR_CARDOWNED
:
824 spin_unlock_irqrestore(&chain
->lock
, flags
);
828 /* fallthrough, if we release the descriptors
829 * brutally (then we don't care about
830 * SPIDER_NET_DESCR_CARDOWNED) */
832 case SPIDER_NET_DESCR_RESPONSE_ERROR
:
833 case SPIDER_NET_DESCR_PROTECTION_ERROR
:
834 case SPIDER_NET_DESCR_FORCE_END
:
835 if (netif_msg_tx_err(card
))
836 dev_err(&card
->netdev
->dev
, "forcing end of tx descriptor "
837 "with status x%02x\n", status
);
838 dev
->stats
.tx_errors
++;
842 dev
->stats
.tx_dropped
++;
844 spin_unlock_irqrestore(&chain
->lock
, flags
);
849 chain
->tail
= descr
->next
;
850 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_NOT_IN_USE
;
853 buf_addr
= hwdescr
->buf_addr
;
854 spin_unlock_irqrestore(&chain
->lock
, flags
);
858 pci_unmap_single(card
->pdev
, buf_addr
, skb
->len
,
867 * spider_net_kick_tx_dma - enables TX DMA processing
868 * @card: card structure
870 * This routine will start the transmit DMA running if
871 * it is not already running. This routine ned only be
872 * called when queueing a new packet to an empty tx queue.
873 * Writes the current tx chain head as start address
874 * of the tx descriptor chain and enables the transmission
878 spider_net_kick_tx_dma(struct spider_net_card
*card
)
880 struct spider_net_descr
*descr
;
882 if (spider_net_read_reg(card
, SPIDER_NET_GDTDMACCNTR
) &
883 SPIDER_NET_TX_DMA_EN
)
886 descr
= card
->tx_chain
.tail
;
888 if (spider_net_get_descr_status(descr
->hwdescr
) ==
889 SPIDER_NET_DESCR_CARDOWNED
) {
890 spider_net_write_reg(card
, SPIDER_NET_GDTDCHA
,
892 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
893 SPIDER_NET_DMA_TX_VALUE
);
896 if (descr
== card
->tx_chain
.head
)
902 mod_timer(&card
->tx_timer
, jiffies
+ SPIDER_NET_TX_TIMER
);
906 * spider_net_xmit - transmits a frame over the device
907 * @skb: packet to send out
908 * @netdev: interface device structure
910 * returns 0 on success, !0 on failure
913 spider_net_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
916 struct spider_net_card
*card
= netdev_priv(netdev
);
918 spider_net_release_tx_chain(card
, 0);
920 if (spider_net_prepare_tx_descr(card
, skb
) != 0) {
921 netdev
->stats
.tx_dropped
++;
922 netif_stop_queue(netdev
);
923 return NETDEV_TX_BUSY
;
926 cnt
= spider_net_set_low_watermark(card
);
928 spider_net_kick_tx_dma(card
);
933 * spider_net_cleanup_tx_ring - cleans up the TX ring
934 * @card: card structure
936 * spider_net_cleanup_tx_ring is called by either the tx_timer
937 * or from the NAPI polling routine.
938 * This routine releases resources associted with transmitted
939 * packets, including updating the queue tail pointer.
942 spider_net_cleanup_tx_ring(struct spider_net_card
*card
)
944 if ((spider_net_release_tx_chain(card
, 0) != 0) &&
945 (card
->netdev
->flags
& IFF_UP
)) {
946 spider_net_kick_tx_dma(card
);
947 netif_wake_queue(card
->netdev
);
952 * spider_net_do_ioctl - called for device ioctls
953 * @netdev: interface device structure
954 * @ifr: request parameter structure for ioctl
955 * @cmd: command code for ioctl
957 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
958 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
961 spider_net_do_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
970 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
971 * @descr: descriptor to process
972 * @card: card structure
974 * Fills out skb structure and passes the data to the stack.
975 * The descriptor state is not changed.
978 spider_net_pass_skb_up(struct spider_net_descr
*descr
,
979 struct spider_net_card
*card
)
981 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
982 struct sk_buff
*skb
= descr
->skb
;
983 struct net_device
*netdev
= card
->netdev
;
984 u32 data_status
= hwdescr
->data_status
;
985 u32 data_error
= hwdescr
->data_error
;
987 skb_put(skb
, hwdescr
->valid_size
);
989 /* the card seems to add 2 bytes of junk in front
990 * of the ethernet frame */
991 #define SPIDER_MISALIGN 2
992 skb_pull(skb
, SPIDER_MISALIGN
);
993 skb
->protocol
= eth_type_trans(skb
, netdev
);
995 /* checksum offload */
996 if (card
->options
.rx_csum
) {
997 if ( ( (data_status
& SPIDER_NET_DATA_STATUS_CKSUM_MASK
) ==
998 SPIDER_NET_DATA_STATUS_CKSUM_MASK
) &&
999 !(data_error
& SPIDER_NET_DATA_ERR_CKSUM_MASK
))
1000 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1002 skb
->ip_summed
= CHECKSUM_NONE
;
1004 skb
->ip_summed
= CHECKSUM_NONE
;
1006 if (data_status
& SPIDER_NET_VLAN_PACKET
) {
1007 /* further enhancements: HW-accel VLAN
1008 * vlan_hwaccel_receive_skb
1012 /* update netdevice statistics */
1013 netdev
->stats
.rx_packets
++;
1014 netdev
->stats
.rx_bytes
+= skb
->len
;
1016 /* pass skb up to stack */
1017 netif_receive_skb(skb
);
1020 static void show_rx_chain(struct spider_net_card
*card
)
1022 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1023 struct spider_net_descr
*start
= chain
->tail
;
1024 struct spider_net_descr
*descr
= start
;
1025 struct spider_net_hw_descr
*hwd
= start
->hwdescr
;
1026 struct device
*dev
= &card
->netdev
->dev
;
1027 u32 curr_desc
, next_desc
;
1032 int off
= start
- chain
->ring
;
1033 int cstat
= hwd
->dmac_cmd_status
;
1035 dev_info(dev
, "Total number of descrs=%d\n",
1037 dev_info(dev
, "Chain tail located at descr=%d, status=0x%x\n",
1040 curr_desc
= spider_net_read_reg(card
, SPIDER_NET_GDACTDPA
);
1041 next_desc
= spider_net_read_reg(card
, SPIDER_NET_GDACNEXTDA
);
1046 hwd
= descr
->hwdescr
;
1047 off
= descr
- chain
->ring
;
1048 status
= hwd
->dmac_cmd_status
;
1050 if (descr
== chain
->head
)
1051 dev_info(dev
, "Chain head is at %d, head status=0x%x\n",
1054 if (curr_desc
== descr
->bus_addr
)
1055 dev_info(dev
, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1058 if (next_desc
== descr
->bus_addr
)
1059 dev_info(dev
, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1062 if (hwd
->next_descr_addr
== 0)
1063 dev_info(dev
, "chain is cut at %d\n", off
);
1065 if (cstat
!= status
) {
1066 int from
= (chain
->num_desc
+ off
- cnt
) % chain
->num_desc
;
1067 int to
= (chain
->num_desc
+ off
- 1) % chain
->num_desc
;
1068 dev_info(dev
, "Have %d (from %d to %d) descrs "
1069 "with stat=0x%08x\n", cnt
, from
, to
, cstat
);
1076 descr
= descr
->next
;
1077 } while (descr
!= start
);
1079 dev_info(dev
, "Last %d descrs with stat=0x%08x "
1080 "for a total of %d descrs\n", cnt
, cstat
, tot
);
1083 /* Now dump the whole ring */
1087 struct spider_net_hw_descr
*hwd
= descr
->hwdescr
;
1088 status
= spider_net_get_descr_status(hwd
);
1089 cnt
= descr
- chain
->ring
;
1090 dev_info(dev
, "Descr %d stat=0x%08x skb=%p\n",
1091 cnt
, status
, descr
->skb
);
1092 dev_info(dev
, "bus addr=%08x buf addr=%08x sz=%d\n",
1093 descr
->bus_addr
, hwd
->buf_addr
, hwd
->buf_size
);
1094 dev_info(dev
, "next=%08x result sz=%d valid sz=%d\n",
1095 hwd
->next_descr_addr
, hwd
->result_size
,
1097 dev_info(dev
, "dmac=%08x data stat=%08x data err=%08x\n",
1098 hwd
->dmac_cmd_status
, hwd
->data_status
,
1100 dev_info(dev
, "\n");
1102 descr
= descr
->next
;
1103 } while (descr
!= start
);
1109 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1111 * If the driver fails to keep up and empty the queue, then the
1112 * hardware wil run out of room to put incoming packets. This
1113 * will cause the hardware to skip descrs that are full (instead
1114 * of halting/retrying). Thus, once the driver runs, it wil need
1115 * to "catch up" to where the hardware chain pointer is at.
1117 static void spider_net_resync_head_ptr(struct spider_net_card
*card
)
1119 unsigned long flags
;
1120 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1121 struct spider_net_descr
*descr
;
1124 /* Advance head pointer past any empty descrs */
1125 descr
= chain
->head
;
1126 status
= spider_net_get_descr_status(descr
->hwdescr
);
1128 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
1131 spin_lock_irqsave(&chain
->lock
, flags
);
1133 descr
= chain
->head
;
1134 status
= spider_net_get_descr_status(descr
->hwdescr
);
1135 for (i
=0; i
<chain
->num_desc
; i
++) {
1136 if (status
!= SPIDER_NET_DESCR_CARDOWNED
) break;
1137 descr
= descr
->next
;
1138 status
= spider_net_get_descr_status(descr
->hwdescr
);
1140 chain
->head
= descr
;
1142 spin_unlock_irqrestore(&chain
->lock
, flags
);
1145 static int spider_net_resync_tail_ptr(struct spider_net_card
*card
)
1147 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1148 struct spider_net_descr
*descr
;
1151 /* Advance tail pointer past any empty and reaped descrs */
1152 descr
= chain
->tail
;
1153 status
= spider_net_get_descr_status(descr
->hwdescr
);
1155 for (i
=0; i
<chain
->num_desc
; i
++) {
1156 if ((status
!= SPIDER_NET_DESCR_CARDOWNED
) &&
1157 (status
!= SPIDER_NET_DESCR_NOT_IN_USE
)) break;
1158 descr
= descr
->next
;
1159 status
= spider_net_get_descr_status(descr
->hwdescr
);
1161 chain
->tail
= descr
;
1163 if ((i
== chain
->num_desc
) || (i
== 0))
1169 * spider_net_decode_one_descr - processes an RX descriptor
1170 * @card: card structure
1172 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1174 * Processes an RX descriptor by iommu-unmapping the data buffer
1175 * and passing the packet up to the stack. This function is called
1176 * in softirq context, e.g. either bottom half from interrupt or
1177 * NAPI polling context.
1180 spider_net_decode_one_descr(struct spider_net_card
*card
)
1182 struct net_device
*dev
= card
->netdev
;
1183 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1184 struct spider_net_descr
*descr
= chain
->tail
;
1185 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
1189 status
= spider_net_get_descr_status(hwdescr
);
1191 /* Nothing in the descriptor, or ring must be empty */
1192 if ((status
== SPIDER_NET_DESCR_CARDOWNED
) ||
1193 (status
== SPIDER_NET_DESCR_NOT_IN_USE
))
1196 /* descriptor definitively used -- move on tail */
1197 chain
->tail
= descr
->next
;
1199 /* unmap descriptor */
1200 hw_buf_addr
= hwdescr
->buf_addr
;
1201 hwdescr
->buf_addr
= 0xffffffff;
1202 pci_unmap_single(card
->pdev
, hw_buf_addr
,
1203 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
1205 if ( (status
== SPIDER_NET_DESCR_RESPONSE_ERROR
) ||
1206 (status
== SPIDER_NET_DESCR_PROTECTION_ERROR
) ||
1207 (status
== SPIDER_NET_DESCR_FORCE_END
) ) {
1208 if (netif_msg_rx_err(card
))
1210 "dropping RX descriptor with state %d\n", status
);
1211 dev
->stats
.rx_dropped
++;
1215 if ( (status
!= SPIDER_NET_DESCR_COMPLETE
) &&
1216 (status
!= SPIDER_NET_DESCR_FRAME_END
) ) {
1217 if (netif_msg_rx_err(card
))
1218 dev_err(&card
->netdev
->dev
,
1219 "RX descriptor with unknown state %d\n", status
);
1220 card
->spider_stats
.rx_desc_unk_state
++;
1224 /* The cases we'll throw away the packet immediately */
1225 if (hwdescr
->data_error
& SPIDER_NET_DESTROY_RX_FLAGS
) {
1226 if (netif_msg_rx_err(card
))
1227 dev_err(&card
->netdev
->dev
,
1228 "error in received descriptor found, "
1229 "data_status=x%08x, data_error=x%08x\n",
1230 hwdescr
->data_status
, hwdescr
->data_error
);
1234 if (hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_BAD_STATUS
) {
1235 dev_err(&card
->netdev
->dev
, "bad status, cmd_status=x%08x\n",
1236 hwdescr
->dmac_cmd_status
);
1237 pr_err("buf_addr=x%08x\n", hw_buf_addr
);
1238 pr_err("buf_size=x%08x\n", hwdescr
->buf_size
);
1239 pr_err("next_descr_addr=x%08x\n", hwdescr
->next_descr_addr
);
1240 pr_err("result_size=x%08x\n", hwdescr
->result_size
);
1241 pr_err("valid_size=x%08x\n", hwdescr
->valid_size
);
1242 pr_err("data_status=x%08x\n", hwdescr
->data_status
);
1243 pr_err("data_error=x%08x\n", hwdescr
->data_error
);
1244 pr_err("which=%ld\n", descr
- card
->rx_chain
.ring
);
1246 card
->spider_stats
.rx_desc_error
++;
1250 /* Ok, we've got a packet in descr */
1251 spider_net_pass_skb_up(descr
, card
);
1253 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1257 if (netif_msg_rx_err(card
))
1258 show_rx_chain(card
);
1259 dev_kfree_skb_irq(descr
->skb
);
1261 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1266 * spider_net_poll - NAPI poll function called by the stack to return packets
1267 * @netdev: interface device structure
1268 * @budget: number of packets we can pass to the stack at most
1270 * returns 0 if no more packets available to the driver/stack. Returns 1,
1271 * if the quota is exceeded, but the driver has still packets.
1273 * spider_net_poll returns all packets from the rx descriptors to the stack
1274 * (using netif_receive_skb). If all/enough packets are up, the driver
1275 * reenables interrupts and returns 0. If not, 1 is returned.
1277 static int spider_net_poll(struct napi_struct
*napi
, int budget
)
1279 struct spider_net_card
*card
= container_of(napi
, struct spider_net_card
, napi
);
1280 struct net_device
*netdev
= card
->netdev
;
1281 int packets_done
= 0;
1283 while (packets_done
< budget
) {
1284 if (!spider_net_decode_one_descr(card
))
1290 if ((packets_done
== 0) && (card
->num_rx_ints
!= 0)) {
1291 if (!spider_net_resync_tail_ptr(card
))
1292 packets_done
= budget
;
1293 spider_net_resync_head_ptr(card
);
1295 card
->num_rx_ints
= 0;
1297 spider_net_refill_rx_chain(card
);
1298 spider_net_enable_rxdmac(card
);
1300 spider_net_cleanup_tx_ring(card
);
1302 /* if all packets are in the stack, enable interrupts and return 0 */
1303 /* if not, return 1 */
1304 if (packets_done
< budget
) {
1305 netif_rx_complete(netdev
, napi
);
1306 spider_net_rx_irq_on(card
);
1307 card
->ignore_rx_ramfull
= 0;
1310 return packets_done
;
1314 * spider_net_change_mtu - changes the MTU of an interface
1315 * @netdev: interface device structure
1316 * @new_mtu: new MTU value
1318 * returns 0 on success, <0 on failure
1321 spider_net_change_mtu(struct net_device
*netdev
, int new_mtu
)
1323 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1324 * and mtu is outbound only anyway */
1325 if ( (new_mtu
< SPIDER_NET_MIN_MTU
) ||
1326 (new_mtu
> SPIDER_NET_MAX_MTU
) )
1328 netdev
->mtu
= new_mtu
;
1333 * spider_net_set_mac - sets the MAC of an interface
1334 * @netdev: interface device structure
1335 * @ptr: pointer to new MAC address
1337 * Returns 0 on success, <0 on failure. Currently, we don't support this
1338 * and will always return EOPNOTSUPP.
1341 spider_net_set_mac(struct net_device
*netdev
, void *p
)
1343 struct spider_net_card
*card
= netdev_priv(netdev
);
1344 u32 macl
, macu
, regvalue
;
1345 struct sockaddr
*addr
= p
;
1347 if (!is_valid_ether_addr(addr
->sa_data
))
1348 return -EADDRNOTAVAIL
;
1350 /* switch off GMACTPE and GMACRPE */
1351 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1352 regvalue
&= ~((1 << 5) | (1 << 6));
1353 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1356 macu
= (addr
->sa_data
[0]<<24) + (addr
->sa_data
[1]<<16) +
1357 (addr
->sa_data
[2]<<8) + (addr
->sa_data
[3]);
1358 macl
= (addr
->sa_data
[4]<<8) + (addr
->sa_data
[5]);
1359 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACU
, macu
);
1360 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACL
, macl
);
1362 /* switch GMACTPE and GMACRPE back on */
1363 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1364 regvalue
|= ((1 << 5) | (1 << 6));
1365 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1367 spider_net_set_promisc(card
);
1369 /* look up, whether we have been successful */
1370 if (spider_net_get_mac_address(netdev
))
1371 return -EADDRNOTAVAIL
;
1372 if (memcmp(netdev
->dev_addr
,addr
->sa_data
,netdev
->addr_len
))
1373 return -EADDRNOTAVAIL
;
1379 * spider_net_link_reset
1380 * @netdev: net device structure
1382 * This is called when the PHY_LINK signal is asserted. For the blade this is
1383 * not connected so we should never get here.
1387 spider_net_link_reset(struct net_device
*netdev
)
1390 struct spider_net_card
*card
= netdev_priv(netdev
);
1392 del_timer_sync(&card
->aneg_timer
);
1394 /* clear interrupt, block further interrupts */
1395 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
1396 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
1397 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1399 /* reset phy and setup aneg */
1400 card
->aneg_count
= 0;
1401 card
->medium
= BCM54XX_COPPER
;
1402 spider_net_setup_aneg(card
);
1403 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1408 * spider_net_handle_error_irq - handles errors raised by an interrupt
1409 * @card: card structure
1410 * @status_reg: interrupt status register 0 (GHIINT0STS)
1412 * spider_net_handle_error_irq treats or ignores all error conditions
1413 * found when an interrupt is presented
1416 spider_net_handle_error_irq(struct spider_net_card
*card
, u32 status_reg
,
1417 u32 error_reg1
, u32 error_reg2
)
1422 /* check GHIINT0STS ************************************/
1424 for (i
= 0; i
< 32; i
++)
1425 if (status_reg
& (1<<i
))
1428 /* let error_reg1 and error_reg2 evaluation decide, what to do
1429 case SPIDER_NET_PHYINT:
1430 case SPIDER_NET_GMAC2INT:
1431 case SPIDER_NET_GMAC1INT:
1432 case SPIDER_NET_GFIFOINT:
1433 case SPIDER_NET_DMACINT:
1434 case SPIDER_NET_GSYSINT:
1437 case SPIDER_NET_GIPSINT
:
1441 case SPIDER_NET_GPWOPCMPINT
:
1442 /* PHY write operation completed */
1445 case SPIDER_NET_GPROPCMPINT
:
1446 /* PHY read operation completed */
1447 /* we don't use semaphores, as we poll for the completion
1448 * of the read operation in spider_net_read_phy. Should take
1452 case SPIDER_NET_GPWFFINT
:
1453 /* PHY command queue full */
1454 if (netif_msg_intr(card
))
1455 dev_err(&card
->netdev
->dev
, "PHY write queue full\n");
1459 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1460 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1461 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1463 case SPIDER_NET_GDTDEN0INT
:
1464 /* someone has set TX_DMA_EN to 0 */
1468 case SPIDER_NET_GDDDEN0INT
: /* fallthrough */
1469 case SPIDER_NET_GDCDEN0INT
: /* fallthrough */
1470 case SPIDER_NET_GDBDEN0INT
: /* fallthrough */
1471 case SPIDER_NET_GDADEN0INT
:
1472 /* someone has set RX_DMA_EN to 0 */
1477 case SPIDER_NET_GDDFDCINT
:
1478 case SPIDER_NET_GDCFDCINT
:
1479 case SPIDER_NET_GDBFDCINT
:
1480 case SPIDER_NET_GDAFDCINT
:
1481 /* case SPIDER_NET_GDNMINT: not used. print a message */
1482 /* case SPIDER_NET_GCNMINT: not used. print a message */
1483 /* case SPIDER_NET_GBNMINT: not used. print a message */
1484 /* case SPIDER_NET_GANMINT: not used. print a message */
1485 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1490 case SPIDER_NET_GDTFDCINT
:
1493 case SPIDER_NET_GTTEDINT
:
1496 case SPIDER_NET_GDTDCEINT
:
1497 /* chain end. If a descriptor should be sent, kick off
1499 if (card->tx_chain.tail != card->tx_chain.head)
1500 spider_net_kick_tx_dma(card);
1505 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1506 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1509 /* check GHIINT1STS ************************************/
1511 for (i
= 0; i
< 32; i
++)
1512 if (error_reg1
& (1<<i
))
1515 case SPIDER_NET_GTMFLLINT
:
1516 /* TX RAM full may happen on a usual case.
1517 * Logging is not needed. */
1520 case SPIDER_NET_GRFDFLLINT
: /* fallthrough */
1521 case SPIDER_NET_GRFCFLLINT
: /* fallthrough */
1522 case SPIDER_NET_GRFBFLLINT
: /* fallthrough */
1523 case SPIDER_NET_GRFAFLLINT
: /* fallthrough */
1524 case SPIDER_NET_GRMFLLINT
:
1525 /* Could happen when rx chain is full */
1526 if (card
->ignore_rx_ramfull
== 0) {
1527 card
->ignore_rx_ramfull
= 1;
1528 spider_net_resync_head_ptr(card
);
1529 spider_net_refill_rx_chain(card
);
1530 spider_net_enable_rxdmac(card
);
1531 card
->num_rx_ints
++;
1532 netif_rx_schedule(card
->netdev
,
1538 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1539 case SPIDER_NET_GDTINVDINT
:
1540 /* allrighty. tx from previous descr ok */
1545 case SPIDER_NET_GDDDCEINT
: /* fallthrough */
1546 case SPIDER_NET_GDCDCEINT
: /* fallthrough */
1547 case SPIDER_NET_GDBDCEINT
: /* fallthrough */
1548 case SPIDER_NET_GDADCEINT
:
1549 spider_net_resync_head_ptr(card
);
1550 spider_net_refill_rx_chain(card
);
1551 spider_net_enable_rxdmac(card
);
1552 card
->num_rx_ints
++;
1553 netif_rx_schedule(card
->netdev
,
1558 /* invalid descriptor */
1559 case SPIDER_NET_GDDINVDINT
: /* fallthrough */
1560 case SPIDER_NET_GDCINVDINT
: /* fallthrough */
1561 case SPIDER_NET_GDBINVDINT
: /* fallthrough */
1562 case SPIDER_NET_GDAINVDINT
:
1563 /* Could happen when rx chain is full */
1564 spider_net_resync_head_ptr(card
);
1565 spider_net_refill_rx_chain(card
);
1566 spider_net_enable_rxdmac(card
);
1567 card
->num_rx_ints
++;
1568 netif_rx_schedule(card
->netdev
,
1573 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1574 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1575 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1576 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1577 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1578 /* case SPIDER_NET_GDSERINT: problem, print a message */
1579 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1580 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1581 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1582 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1583 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1589 /* check GHIINT2STS ************************************/
1591 for (i
= 0; i
< 32; i
++)
1592 if (error_reg2
& (1<<i
))
1595 /* there is nothing we can (want to) do at this time. Log a
1596 * message, we can switch on and off the specific values later on
1597 case SPIDER_NET_GPROPERINT:
1598 case SPIDER_NET_GMCTCRSNGINT:
1599 case SPIDER_NET_GMCTLCOLINT:
1600 case SPIDER_NET_GMCTTMOTINT:
1601 case SPIDER_NET_GMCRCAERINT:
1602 case SPIDER_NET_GMCRCALERINT:
1603 case SPIDER_NET_GMCRALNERINT:
1604 case SPIDER_NET_GMCROVRINT:
1605 case SPIDER_NET_GMCRRNTINT:
1606 case SPIDER_NET_GMCRRXERINT:
1607 case SPIDER_NET_GTITCSERINT:
1608 case SPIDER_NET_GTIFMTERINT:
1609 case SPIDER_NET_GTIPKTRVKINT:
1610 case SPIDER_NET_GTISPINGINT:
1611 case SPIDER_NET_GTISADNGINT:
1612 case SPIDER_NET_GTISPDNGINT:
1613 case SPIDER_NET_GRIFMTERINT:
1614 case SPIDER_NET_GRIPKTRVKINT:
1615 case SPIDER_NET_GRISPINGINT:
1616 case SPIDER_NET_GRISADNGINT:
1617 case SPIDER_NET_GRISPDNGINT:
1624 if ((show_error
) && (netif_msg_intr(card
)) && net_ratelimit())
1625 dev_err(&card
->netdev
->dev
, "Error interrupt, GHIINT0STS = 0x%08x, "
1626 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1627 status_reg
, error_reg1
, error_reg2
);
1629 /* clear interrupt sources */
1630 spider_net_write_reg(card
, SPIDER_NET_GHIINT1STS
, error_reg1
);
1631 spider_net_write_reg(card
, SPIDER_NET_GHIINT2STS
, error_reg2
);
1635 * spider_net_interrupt - interrupt handler for spider_net
1636 * @irq: interrupt number
1637 * @ptr: pointer to net_device
1639 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1640 * interrupt found raised by card.
1642 * This is the interrupt handler, that turns off
1643 * interrupts for this device and makes the stack poll the driver
1646 spider_net_interrupt(int irq
, void *ptr
)
1648 struct net_device
*netdev
= ptr
;
1649 struct spider_net_card
*card
= netdev_priv(netdev
);
1650 u32 status_reg
, error_reg1
, error_reg2
;
1652 status_reg
= spider_net_read_reg(card
, SPIDER_NET_GHIINT0STS
);
1653 error_reg1
= spider_net_read_reg(card
, SPIDER_NET_GHIINT1STS
);
1654 error_reg2
= spider_net_read_reg(card
, SPIDER_NET_GHIINT2STS
);
1656 if (!(status_reg
& SPIDER_NET_INT0_MASK_VALUE
) &&
1657 !(error_reg1
& SPIDER_NET_INT1_MASK_VALUE
) &&
1658 !(error_reg2
& SPIDER_NET_INT2_MASK_VALUE
))
1661 if (status_reg
& SPIDER_NET_RXINT
) {
1662 spider_net_rx_irq_off(card
);
1663 netif_rx_schedule(netdev
, &card
->napi
);
1664 card
->num_rx_ints
++;
1666 if (status_reg
& SPIDER_NET_TXINT
)
1667 netif_rx_schedule(netdev
, &card
->napi
);
1669 if (status_reg
& SPIDER_NET_LINKINT
)
1670 spider_net_link_reset(netdev
);
1672 if (status_reg
& SPIDER_NET_ERRINT
)
1673 spider_net_handle_error_irq(card
, status_reg
,
1674 error_reg1
, error_reg2
);
1676 /* clear interrupt sources */
1677 spider_net_write_reg(card
, SPIDER_NET_GHIINT0STS
, status_reg
);
1682 #ifdef CONFIG_NET_POLL_CONTROLLER
1684 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1685 * @netdev: interface device structure
1687 * see Documentation/networking/netconsole.txt
1690 spider_net_poll_controller(struct net_device
*netdev
)
1692 disable_irq(netdev
->irq
);
1693 spider_net_interrupt(netdev
->irq
, netdev
);
1694 enable_irq(netdev
->irq
);
1696 #endif /* CONFIG_NET_POLL_CONTROLLER */
1699 * spider_net_enable_interrupts - enable interrupts
1700 * @card: card structure
1702 * spider_net_enable_interrupt enables several interrupts
1705 spider_net_enable_interrupts(struct spider_net_card
*card
)
1707 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
,
1708 SPIDER_NET_INT0_MASK_VALUE
);
1709 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
,
1710 SPIDER_NET_INT1_MASK_VALUE
);
1711 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
,
1712 SPIDER_NET_INT2_MASK_VALUE
);
1716 * spider_net_disable_interrupts - disable interrupts
1717 * @card: card structure
1719 * spider_net_disable_interrupts disables all the interrupts
1722 spider_net_disable_interrupts(struct spider_net_card
*card
)
1724 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, 0);
1725 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
, 0);
1726 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
, 0);
1727 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1731 * spider_net_init_card - initializes the card
1732 * @card: card structure
1734 * spider_net_init_card initializes the card so that other registers can
1738 spider_net_init_card(struct spider_net_card
*card
)
1740 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1741 SPIDER_NET_CKRCTRL_STOP_VALUE
);
1743 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1744 SPIDER_NET_CKRCTRL_RUN_VALUE
);
1746 /* trigger ETOMOD signal */
1747 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1748 spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
) | 0x4);
1750 spider_net_disable_interrupts(card
);
1754 * spider_net_enable_card - enables the card by setting all kinds of regs
1755 * @card: card structure
1757 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1760 spider_net_enable_card(struct spider_net_card
*card
)
1763 /* the following array consists of (register),(value) pairs
1764 * that are set in this function. A register of 0 ends the list */
1766 { SPIDER_NET_GRESUMINTNUM
, 0 },
1767 { SPIDER_NET_GREINTNUM
, 0 },
1769 /* set interrupt frame number registers */
1770 /* clear the single DMA engine registers first */
1771 { SPIDER_NET_GFAFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1772 { SPIDER_NET_GFBFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1773 { SPIDER_NET_GFCFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1774 { SPIDER_NET_GFDFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1775 /* then set, what we really need */
1776 { SPIDER_NET_GFFRMNUM
, SPIDER_NET_FRAMENUM_VALUE
},
1778 /* timer counter registers and stuff */
1779 { SPIDER_NET_GFREECNNUM
, 0 },
1780 { SPIDER_NET_GONETIMENUM
, 0 },
1781 { SPIDER_NET_GTOUTFRMNUM
, 0 },
1783 /* RX mode setting */
1784 { SPIDER_NET_GRXMDSET
, SPIDER_NET_RXMODE_VALUE
},
1785 /* TX mode setting */
1786 { SPIDER_NET_GTXMDSET
, SPIDER_NET_TXMODE_VALUE
},
1787 /* IPSEC mode setting */
1788 { SPIDER_NET_GIPSECINIT
, SPIDER_NET_IPSECINIT_VALUE
},
1790 { SPIDER_NET_GFTRESTRT
, SPIDER_NET_RESTART_VALUE
},
1792 { SPIDER_NET_GMRWOLCTRL
, 0 },
1793 { SPIDER_NET_GTESTMD
, 0x10000000 },
1794 { SPIDER_NET_GTTQMSK
, 0x00400040 },
1796 { SPIDER_NET_GMACINTEN
, 0 },
1798 /* flow control stuff */
1799 { SPIDER_NET_GMACAPAUSE
, SPIDER_NET_MACAPAUSE_VALUE
},
1800 { SPIDER_NET_GMACTXPAUSE
, SPIDER_NET_TXPAUSE_VALUE
},
1802 { SPIDER_NET_GMACBSTLMT
, SPIDER_NET_BURSTLMT_VALUE
},
1807 while (regs
[i
][0]) {
1808 spider_net_write_reg(card
, regs
[i
][0], regs
[i
][1]);
1812 /* clear unicast filter table entries 1 to 14 */
1813 for (i
= 1; i
<= 14; i
++) {
1814 spider_net_write_reg(card
,
1815 SPIDER_NET_GMRUAFILnR
+ i
* 8,
1817 spider_net_write_reg(card
,
1818 SPIDER_NET_GMRUAFILnR
+ i
* 8 + 4,
1822 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
, 0x08080000);
1824 spider_net_write_reg(card
, SPIDER_NET_ECMODE
, SPIDER_NET_ECMODE_VALUE
);
1826 /* set chain tail adress for RX chains and
1828 spider_net_enable_rxchtails(card
);
1829 spider_net_enable_rxdmac(card
);
1831 spider_net_write_reg(card
, SPIDER_NET_GRXDMAEN
, SPIDER_NET_WOL_VALUE
);
1833 spider_net_write_reg(card
, SPIDER_NET_GMACLENLMT
,
1834 SPIDER_NET_LENLMT_VALUE
);
1835 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1836 SPIDER_NET_OPMODE_VALUE
);
1838 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
1839 SPIDER_NET_GDTBSTA
);
1843 * spider_net_download_firmware - loads firmware into the adapter
1844 * @card: card structure
1845 * @firmware_ptr: pointer to firmware data
1847 * spider_net_download_firmware loads the firmware data into the
1848 * adapter. It assumes the length etc. to be allright.
1851 spider_net_download_firmware(struct spider_net_card
*card
,
1852 const void *firmware_ptr
)
1855 const u32
*fw_ptr
= firmware_ptr
;
1857 /* stop sequencers */
1858 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1859 SPIDER_NET_STOP_SEQ_VALUE
);
1861 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
1863 spider_net_write_reg(card
,
1864 SPIDER_NET_GSnPRGADR
+ sequencer
* 8, 0);
1865 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
1866 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
1867 sequencer
* 8, *fw_ptr
);
1872 if (spider_net_read_reg(card
, SPIDER_NET_GSINIT
))
1875 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1876 SPIDER_NET_RUN_SEQ_VALUE
);
1882 * spider_net_init_firmware - reads in firmware parts
1883 * @card: card structure
1885 * Returns 0 on success, <0 on failure
1887 * spider_net_init_firmware opens the sequencer firmware and does some basic
1888 * checks. This function opens and releases the firmware structure. A call
1889 * to download the firmware is performed before the release.
1893 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1894 * the program for each sequencer. Use the command
1895 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1896 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1897 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1899 * to generate spider_fw.bin, if you have sequencer programs with something
1900 * like the following contents for each sequencer:
1901 * <ONE LINE COMMENT>
1902 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1903 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1905 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1908 spider_net_init_firmware(struct spider_net_card
*card
)
1910 struct firmware
*firmware
= NULL
;
1911 struct device_node
*dn
;
1912 const u8
*fw_prop
= NULL
;
1916 if (request_firmware((const struct firmware
**)&firmware
,
1917 SPIDER_NET_FIRMWARE_NAME
, &card
->pdev
->dev
) == 0) {
1918 if ( (firmware
->size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1919 netif_msg_probe(card
) ) {
1920 dev_err(&card
->netdev
->dev
,
1921 "Incorrect size of spidernet firmware in " \
1922 "filesystem. Looking in host firmware...\n");
1925 err
= spider_net_download_firmware(card
, firmware
->data
);
1927 release_firmware(firmware
);
1935 dn
= pci_device_to_OF_node(card
->pdev
);
1939 fw_prop
= of_get_property(dn
, "firmware", &fw_size
);
1943 if ( (fw_size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1944 netif_msg_probe(card
) ) {
1945 dev_err(&card
->netdev
->dev
,
1946 "Incorrect size of spidernet firmware in host firmware\n");
1950 err
= spider_net_download_firmware(card
, fw_prop
);
1955 if (netif_msg_probe(card
))
1956 dev_err(&card
->netdev
->dev
,
1957 "Couldn't find spidernet firmware in filesystem " \
1958 "or host firmware\n");
1963 * spider_net_open - called upon ifonfig up
1964 * @netdev: interface device structure
1966 * returns 0 on success, <0 on failure
1968 * spider_net_open allocates all the descriptors and memory needed for
1969 * operation, sets up multicast list and enables interrupts
1972 spider_net_open(struct net_device
*netdev
)
1974 struct spider_net_card
*card
= netdev_priv(netdev
);
1977 result
= spider_net_init_firmware(card
);
1979 goto init_firmware_failed
;
1981 /* start probing with copper */
1982 card
->aneg_count
= 0;
1983 card
->medium
= BCM54XX_COPPER
;
1984 spider_net_setup_aneg(card
);
1985 if (card
->phy
.def
->phy_id
)
1986 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1988 result
= spider_net_init_chain(card
, &card
->tx_chain
);
1990 goto alloc_tx_failed
;
1991 card
->low_watermark
= NULL
;
1993 result
= spider_net_init_chain(card
, &card
->rx_chain
);
1995 goto alloc_rx_failed
;
1997 /* Allocate rx skbs */
1998 if (spider_net_alloc_rx_skbs(card
))
1999 goto alloc_skbs_failed
;
2001 spider_net_set_multi(netdev
);
2003 /* further enhancement: setup hw vlan, if needed */
2006 if (request_irq(netdev
->irq
, spider_net_interrupt
,
2007 IRQF_SHARED
, netdev
->name
, netdev
))
2008 goto register_int_failed
;
2010 spider_net_enable_card(card
);
2012 netif_start_queue(netdev
);
2013 netif_carrier_on(netdev
);
2014 napi_enable(&card
->napi
);
2016 spider_net_enable_interrupts(card
);
2020 register_int_failed
:
2021 spider_net_free_rx_chain_contents(card
);
2023 spider_net_free_chain(card
, &card
->rx_chain
);
2025 spider_net_free_chain(card
, &card
->tx_chain
);
2027 del_timer_sync(&card
->aneg_timer
);
2028 init_firmware_failed
:
2033 * spider_net_link_phy
2034 * @data: used for pointer to card structure
2037 static void spider_net_link_phy(unsigned long data
)
2039 struct spider_net_card
*card
= (struct spider_net_card
*)data
;
2040 struct mii_phy
*phy
= &card
->phy
;
2042 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2043 if (card
->aneg_count
> SPIDER_NET_ANEG_TIMEOUT
) {
2045 pr_debug("%s: link is down trying to bring it up\n",
2046 card
->netdev
->name
);
2048 switch (card
->medium
) {
2049 case BCM54XX_COPPER
:
2050 /* enable fiber with autonegotiation first */
2051 if (phy
->def
->ops
->enable_fiber
)
2052 phy
->def
->ops
->enable_fiber(phy
, 1);
2053 card
->medium
= BCM54XX_FIBER
;
2057 /* fiber didn't come up, try to disable fiber autoneg */
2058 if (phy
->def
->ops
->enable_fiber
)
2059 phy
->def
->ops
->enable_fiber(phy
, 0);
2060 card
->medium
= BCM54XX_UNKNOWN
;
2063 case BCM54XX_UNKNOWN
:
2064 /* copper, fiber with and without failed,
2065 * retry from beginning */
2066 spider_net_setup_aneg(card
);
2067 card
->medium
= BCM54XX_COPPER
;
2071 card
->aneg_count
= 0;
2072 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
2076 /* link still not up, try again later */
2077 if (!(phy
->def
->ops
->poll_link(phy
))) {
2079 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
2083 /* link came up, get abilities */
2084 phy
->def
->ops
->read_link(phy
);
2086 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
2087 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
2088 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0x4);
2090 if (phy
->speed
== 1000)
2091 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0x00000001);
2093 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0);
2095 card
->aneg_count
= 0;
2097 pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2098 card
->netdev
->name
, phy
->speed
,
2099 phy
->duplex
== 1 ? "Full" : "Half",
2100 phy
->autoneg
== 1 ? "" : "no ");
2106 * spider_net_setup_phy - setup PHY
2107 * @card: card structure
2109 * returns 0 on success, <0 on failure
2111 * spider_net_setup_phy is used as part of spider_net_probe.
2114 spider_net_setup_phy(struct spider_net_card
*card
)
2116 struct mii_phy
*phy
= &card
->phy
;
2118 spider_net_write_reg(card
, SPIDER_NET_GDTDMASEL
,
2119 SPIDER_NET_DMASEL_VALUE
);
2120 spider_net_write_reg(card
, SPIDER_NET_GPCCTRL
,
2121 SPIDER_NET_PHY_CTRL_VALUE
);
2123 phy
->dev
= card
->netdev
;
2124 phy
->mdio_read
= spider_net_read_phy
;
2125 phy
->mdio_write
= spider_net_write_phy
;
2127 for (phy
->mii_id
= 1; phy
->mii_id
<= 31; phy
->mii_id
++) {
2129 id
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
2130 if (id
!= 0x0000 && id
!= 0xffff) {
2131 if (!mii_phy_probe(phy
, phy
->mii_id
)) {
2132 pr_info("Found %s.\n", phy
->def
->name
);
2142 * spider_net_workaround_rxramfull - work around firmware bug
2143 * @card: card structure
2148 spider_net_workaround_rxramfull(struct spider_net_card
*card
)
2150 int i
, sequencer
= 0;
2153 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2154 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2156 /* empty sequencer data */
2157 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
2159 spider_net_write_reg(card
, SPIDER_NET_GSnPRGADR
+
2160 sequencer
* 8, 0x0);
2161 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
2162 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
2163 sequencer
* 8, 0x0);
2167 /* set sequencer operation */
2168 spider_net_write_reg(card
, SPIDER_NET_GSINIT
, 0x000000fe);
2171 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2172 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2176 * spider_net_stop - called upon ifconfig down
2177 * @netdev: interface device structure
2182 spider_net_stop(struct net_device
*netdev
)
2184 struct spider_net_card
*card
= netdev_priv(netdev
);
2186 napi_disable(&card
->napi
);
2187 netif_carrier_off(netdev
);
2188 netif_stop_queue(netdev
);
2189 del_timer_sync(&card
->tx_timer
);
2190 del_timer_sync(&card
->aneg_timer
);
2192 spider_net_disable_interrupts(card
);
2194 free_irq(netdev
->irq
, netdev
);
2196 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
2197 SPIDER_NET_DMA_TX_FEND_VALUE
);
2199 /* turn off DMA, force end */
2200 spider_net_disable_rxdmac(card
);
2202 /* release chains */
2203 spider_net_release_tx_chain(card
, 1);
2204 spider_net_free_rx_chain_contents(card
);
2206 spider_net_free_chain(card
, &card
->tx_chain
);
2207 spider_net_free_chain(card
, &card
->rx_chain
);
2213 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2214 * function (to be called not under interrupt status)
2215 * @data: data, is interface device structure
2217 * called as task when tx hangs, resets interface (if interface is up)
2220 spider_net_tx_timeout_task(struct work_struct
*work
)
2222 struct spider_net_card
*card
=
2223 container_of(work
, struct spider_net_card
, tx_timeout_task
);
2224 struct net_device
*netdev
= card
->netdev
;
2226 if (!(netdev
->flags
& IFF_UP
))
2229 netif_device_detach(netdev
);
2230 spider_net_stop(netdev
);
2232 spider_net_workaround_rxramfull(card
);
2233 spider_net_init_card(card
);
2235 if (spider_net_setup_phy(card
))
2238 spider_net_open(netdev
);
2239 spider_net_kick_tx_dma(card
);
2240 netif_device_attach(netdev
);
2243 atomic_dec(&card
->tx_timeout_task_counter
);
2247 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2248 * @netdev: interface device structure
2250 * called, if tx hangs. Schedules a task that resets the interface
2253 spider_net_tx_timeout(struct net_device
*netdev
)
2255 struct spider_net_card
*card
;
2257 card
= netdev_priv(netdev
);
2258 atomic_inc(&card
->tx_timeout_task_counter
);
2259 if (netdev
->flags
& IFF_UP
)
2260 schedule_work(&card
->tx_timeout_task
);
2262 atomic_dec(&card
->tx_timeout_task_counter
);
2263 card
->spider_stats
.tx_timeouts
++;
2267 * spider_net_setup_netdev_ops - initialization of net_device operations
2268 * @netdev: net_device structure
2270 * fills out function pointers in the net_device structure
2273 spider_net_setup_netdev_ops(struct net_device
*netdev
)
2275 netdev
->open
= &spider_net_open
;
2276 netdev
->stop
= &spider_net_stop
;
2277 netdev
->hard_start_xmit
= &spider_net_xmit
;
2278 netdev
->set_multicast_list
= &spider_net_set_multi
;
2279 netdev
->set_mac_address
= &spider_net_set_mac
;
2280 netdev
->change_mtu
= &spider_net_change_mtu
;
2281 netdev
->do_ioctl
= &spider_net_do_ioctl
;
2283 netdev
->tx_timeout
= &spider_net_tx_timeout
;
2284 netdev
->watchdog_timeo
= SPIDER_NET_WATCHDOG_TIMEOUT
;
2286 #ifdef CONFIG_NET_POLL_CONTROLLER
2287 /* poll controller */
2288 netdev
->poll_controller
= &spider_net_poll_controller
;
2289 #endif /* CONFIG_NET_POLL_CONTROLLER */
2291 netdev
->ethtool_ops
= &spider_net_ethtool_ops
;
2295 * spider_net_setup_netdev - initialization of net_device
2296 * @card: card structure
2298 * Returns 0 on success or <0 on failure
2300 * spider_net_setup_netdev initializes the net_device structure
2303 spider_net_setup_netdev(struct spider_net_card
*card
)
2306 struct net_device
*netdev
= card
->netdev
;
2307 struct device_node
*dn
;
2308 struct sockaddr addr
;
2311 SET_NETDEV_DEV(netdev
, &card
->pdev
->dev
);
2313 pci_set_drvdata(card
->pdev
, netdev
);
2315 init_timer(&card
->tx_timer
);
2316 card
->tx_timer
.function
=
2317 (void (*)(unsigned long)) spider_net_cleanup_tx_ring
;
2318 card
->tx_timer
.data
= (unsigned long) card
;
2319 netdev
->irq
= card
->pdev
->irq
;
2321 card
->aneg_count
= 0;
2322 init_timer(&card
->aneg_timer
);
2323 card
->aneg_timer
.function
= spider_net_link_phy
;
2324 card
->aneg_timer
.data
= (unsigned long) card
;
2326 card
->options
.rx_csum
= SPIDER_NET_RX_CSUM_DEFAULT
;
2328 netif_napi_add(netdev
, &card
->napi
,
2329 spider_net_poll
, SPIDER_NET_NAPI_WEIGHT
);
2331 spider_net_setup_netdev_ops(netdev
);
2333 netdev
->features
= NETIF_F_IP_CSUM
| NETIF_F_LLTX
;
2334 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2335 * NETIF_F_HW_VLAN_FILTER */
2337 netdev
->irq
= card
->pdev
->irq
;
2338 card
->num_rx_ints
= 0;
2339 card
->ignore_rx_ramfull
= 0;
2341 dn
= pci_device_to_OF_node(card
->pdev
);
2345 mac
= of_get_property(dn
, "local-mac-address", NULL
);
2348 memcpy(addr
.sa_data
, mac
, ETH_ALEN
);
2350 result
= spider_net_set_mac(netdev
, &addr
);
2351 if ((result
) && (netif_msg_probe(card
)))
2352 dev_err(&card
->netdev
->dev
,
2353 "Failed to set MAC address: %i\n", result
);
2355 result
= register_netdev(netdev
);
2357 if (netif_msg_probe(card
))
2358 dev_err(&card
->netdev
->dev
,
2359 "Couldn't register net_device: %i\n", result
);
2363 if (netif_msg_probe(card
))
2364 pr_info("Initialized device %s.\n", netdev
->name
);
2370 * spider_net_alloc_card - allocates net_device and card structure
2372 * returns the card structure or NULL in case of errors
2374 * the card and net_device structures are linked to each other
2376 static struct spider_net_card
*
2377 spider_net_alloc_card(void)
2379 struct net_device
*netdev
;
2380 struct spider_net_card
*card
;
2383 alloc_size
= sizeof(struct spider_net_card
) +
2384 (tx_descriptors
+ rx_descriptors
) * sizeof(struct spider_net_descr
);
2385 netdev
= alloc_etherdev(alloc_size
);
2389 card
= netdev_priv(netdev
);
2390 card
->netdev
= netdev
;
2391 card
->msg_enable
= SPIDER_NET_DEFAULT_MSG
;
2392 INIT_WORK(&card
->tx_timeout_task
, spider_net_tx_timeout_task
);
2393 init_waitqueue_head(&card
->waitq
);
2394 atomic_set(&card
->tx_timeout_task_counter
, 0);
2396 card
->rx_chain
.num_desc
= rx_descriptors
;
2397 card
->rx_chain
.ring
= card
->darray
;
2398 card
->tx_chain
.num_desc
= tx_descriptors
;
2399 card
->tx_chain
.ring
= card
->darray
+ rx_descriptors
;
2405 * spider_net_undo_pci_setup - releases PCI ressources
2406 * @card: card structure
2408 * spider_net_undo_pci_setup releases the mapped regions
2411 spider_net_undo_pci_setup(struct spider_net_card
*card
)
2413 iounmap(card
->regs
);
2414 pci_release_regions(card
->pdev
);
2418 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2421 * Returns the card structure or NULL if any errors occur
2423 * spider_net_setup_pci_dev initializes pdev and together with the
2424 * functions called in spider_net_open configures the device so that
2425 * data can be transferred over it
2426 * The net_device structure is attached to the card structure, if the
2427 * function returns without error.
2429 static struct spider_net_card
*
2430 spider_net_setup_pci_dev(struct pci_dev
*pdev
)
2432 struct spider_net_card
*card
;
2433 unsigned long mmio_start
, mmio_len
;
2435 if (pci_enable_device(pdev
)) {
2436 dev_err(&pdev
->dev
, "Couldn't enable PCI device\n");
2440 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
2442 "Couldn't find proper PCI device base address.\n");
2443 goto out_disable_dev
;
2446 if (pci_request_regions(pdev
, spider_net_driver_name
)) {
2448 "Couldn't obtain PCI resources, aborting.\n");
2449 goto out_disable_dev
;
2452 pci_set_master(pdev
);
2454 card
= spider_net_alloc_card();
2457 "Couldn't allocate net_device structure, aborting.\n");
2458 goto out_release_regions
;
2462 /* fetch base address and length of first resource */
2463 mmio_start
= pci_resource_start(pdev
, 0);
2464 mmio_len
= pci_resource_len(pdev
, 0);
2466 card
->netdev
->mem_start
= mmio_start
;
2467 card
->netdev
->mem_end
= mmio_start
+ mmio_len
;
2468 card
->regs
= ioremap(mmio_start
, mmio_len
);
2472 "Couldn't obtain PCI resources, aborting.\n");
2473 goto out_release_regions
;
2478 out_release_regions
:
2479 pci_release_regions(pdev
);
2481 pci_disable_device(pdev
);
2482 pci_set_drvdata(pdev
, NULL
);
2487 * spider_net_probe - initialization of a device
2489 * @ent: entry in the device id list
2491 * Returns 0 on success, <0 on failure
2493 * spider_net_probe initializes pdev and registers a net_device
2494 * structure for it. After that, the device can be ifconfig'ed up
2496 static int __devinit
2497 spider_net_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
2500 struct spider_net_card
*card
;
2502 card
= spider_net_setup_pci_dev(pdev
);
2506 spider_net_workaround_rxramfull(card
);
2507 spider_net_init_card(card
);
2509 err
= spider_net_setup_phy(card
);
2513 err
= spider_net_setup_netdev(card
);
2520 spider_net_undo_pci_setup(card
);
2521 free_netdev(card
->netdev
);
2527 * spider_net_remove - removal of a device
2530 * Returns 0 on success, <0 on failure
2532 * spider_net_remove is called to remove the device and unregisters the
2535 static void __devexit
2536 spider_net_remove(struct pci_dev
*pdev
)
2538 struct net_device
*netdev
;
2539 struct spider_net_card
*card
;
2541 netdev
= pci_get_drvdata(pdev
);
2542 card
= netdev_priv(netdev
);
2544 wait_event(card
->waitq
,
2545 atomic_read(&card
->tx_timeout_task_counter
) == 0);
2547 unregister_netdev(netdev
);
2549 /* switch off card */
2550 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2551 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2552 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2553 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2555 spider_net_undo_pci_setup(card
);
2556 free_netdev(netdev
);
2559 static struct pci_driver spider_net_driver
= {
2560 .name
= spider_net_driver_name
,
2561 .id_table
= spider_net_pci_tbl
,
2562 .probe
= spider_net_probe
,
2563 .remove
= __devexit_p(spider_net_remove
)
2567 * spider_net_init - init function when the driver is loaded
2569 * spider_net_init registers the device driver
2571 static int __init
spider_net_init(void)
2573 printk(KERN_INFO
"Spidernet version %s.\n", VERSION
);
2575 if (rx_descriptors
< SPIDER_NET_RX_DESCRIPTORS_MIN
) {
2576 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MIN
;
2577 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2579 if (rx_descriptors
> SPIDER_NET_RX_DESCRIPTORS_MAX
) {
2580 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MAX
;
2581 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2583 if (tx_descriptors
< SPIDER_NET_TX_DESCRIPTORS_MIN
) {
2584 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MIN
;
2585 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2587 if (tx_descriptors
> SPIDER_NET_TX_DESCRIPTORS_MAX
) {
2588 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MAX
;
2589 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2592 return pci_register_driver(&spider_net_driver
);
2596 * spider_net_cleanup - exit function when driver is unloaded
2598 * spider_net_cleanup unregisters the device driver
2600 static void __exit
spider_net_cleanup(void)
2602 pci_unregister_driver(&spider_net_driver
);
2605 module_init(spider_net_init
);
2606 module_exit(spider_net_cleanup
);