?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Char: rocket, switch long delay to sleep
[linux-2.6/zen-sources.git] / arch / ppc / platforms / pplus.c
blob8a1788c48155459da8b854ef144a4f87267ae102
1 /*
2 * Board and PCI setup routines for MCG PowerPlus
3 *
4 * Author: Randy Vinson <rvinson@mvista.com>
5 *
6 * Derived from original PowerPlus PReP work by
7 * Cort Dougan, Johnnie Peters, Matt Porter, and
8 * Troy Benjegerdes.
9 *
10 * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
11 * the terms of the GNU General Public License version 2. This program
12 * is licensed "as is" without any warranty of any kind, whether express
13 * or implied.
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/interrupt.h>
18 #include <linux/init.h>
19 #include <linux/ioport.h>
20 #include <linux/console.h>
21 #include <linux/pci.h>
22 #include <linux/ide.h>
23 #include <linux/seq_file.h>
24 #include <linux/root_dev.h>
25
26 #include <asm/system.h>
27 #include <asm/io.h>
28 #include <asm/pgtable.h>
29 #include <asm/dma.h>
30 #include <asm/machdep.h>
31 #include <asm/prep_nvram.h>
32 #include <asm/vga.h>
33 #include <asm/i8259.h>
34 #include <asm/open_pic.h>
35 #include <asm/hawk.h>
36 #include <asm/todc.h>
37 #include <asm/bootinfo.h>
38 #include <asm/kgdb.h>
39 #include <asm/reg.h>
40
41 #include "pplus.h"
42
43 #undef DUMP_DBATS
44
45 TODC_ALLOC();
46
47 extern void pplus_setup_hose(void);
48 extern void pplus_set_VIA_IDE_native(void);
49
50 extern unsigned long loops_per_jiffy;
51 unsigned char *Motherboard_map_name;
52
53 /* Tables for known hardware */
54
55 /* Motorola Mesquite */
56 static inline int
57 mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
58 {
59 static char pci_irq_table[][4] =
60 /*
61 * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
62 * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
63 * PCI IDSEL/INTPIN->INTLINE
64 * A B C D
65 */
66 {
67 {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */
68 { 0, 0, 0, 0}, /* IDSEL 15 - unused */
69 {19, 19, 19, 19}, /* IDSEL 16 - PMC Slot 1 */
70 { 0, 0, 0, 0}, /* IDSEL 17 - unused */
71 { 0, 0, 0, 0}, /* IDSEL 18 - unused */
72 { 0, 0, 0, 0}, /* IDSEL 19 - unused */
73 {24, 25, 26, 27}, /* IDSEL 20 - P2P bridge (to cPCI 1) */
74 { 0, 0, 0, 0}, /* IDSEL 21 - unused */
75 {28, 29, 30, 31} /* IDSEL 22 - P2P bridge (to cPCI 2) */
76 };
77
78 const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
79 return PCI_IRQ_TABLE_LOOKUP;
80 }
81
82 /* Motorola Sitka */
83 static inline int
84 sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
85 {
86 static char pci_irq_table[][4] =
87 /*
88 * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
89 * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
90 * PCI IDSEL/INTPIN->INTLINE
91 * A B C D
92 */
93 {
94 {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */
95 { 0, 0, 0, 0}, /* IDSEL 15 - unused */
96 {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */
97 {28, 25, 26, 27}, /* IDSEL 17 - PMC Slot 2 */
98 { 0, 0, 0, 0}, /* IDSEL 18 - unused */
99 { 0, 0, 0, 0}, /* IDSEL 19 - unused */
100 {20, 0, 0, 0} /* IDSEL 20 - P2P bridge (to cPCI) */
101 };
102
103 const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4;
104 return PCI_IRQ_TABLE_LOOKUP;
105 }
106
107 /* Motorola MTX */
108 static inline int
109 MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
110 {
111 static char pci_irq_table[][4] =
112 /*
113 * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
114 * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
115 * PCI IDSEL/INTPIN->INTLINE
116 * A B C D
117 */
118 {
119 {19, 0, 0, 0}, /* IDSEL 12 - SCSI */
120 { 0, 0, 0, 0}, /* IDSEL 13 - unused */
121 {18, 0, 0, 0}, /* IDSEL 14 - Enet */
122 { 0, 0, 0, 0}, /* IDSEL 15 - unused */
123 {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */
124 {26, 27, 28, 25}, /* IDSEL 17 - PMC Slot 2 */
125 {27, 28, 25, 26} /* IDSEL 18 - PCI Slot 3 */
126 };
127
128 const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4;
129 return PCI_IRQ_TABLE_LOOKUP;
130 }
131
132 /* Motorola MTX Plus */
133 /* Secondary bus interrupt routing is not supported yet */
134 static inline int
135 MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
136 {
137 static char pci_irq_table[][4] =
138 /*
139 * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
140 * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
141 * PCI IDSEL/INTPIN->INTLINE
142 * A B C D
143 */
144 {
145 {19, 0, 0, 0}, /* IDSEL 12 - SCSI */
146 { 0, 0, 0, 0}, /* IDSEL 13 - unused */
147 {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */
148 { 0, 0, 0, 0}, /* IDSEL 15 - unused */
149 {25, 26, 27, 28}, /* IDSEL 16 - PCI Slot 1P */
150 {26, 27, 28, 25}, /* IDSEL 17 - PCI Slot 2P */
151 {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */
152 {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */
153 { 0, 0, 0, 0} /* IDSEL 20 - P2P Bridge */
154 };
155
156 const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
157 return PCI_IRQ_TABLE_LOOKUP;
158 }
159
160 static inline int
161 Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
162 {
163 /* 2600
164 * Raven 31
165 * ISA 11
166 * SCSI 12 - IRQ3
167 * Univ 13
168 * eth 14 - IRQ2
169 * VGA 15 - IRQ4
170 * PMC1 16 - IRQ9,10,11,12 = PMC1 A-D
171 * PMC2 17 - IRQ12,9,10,11 = A-D
172 * SCSI2 18 - IRQ11
173 * eth2 19 - IRQ10
174 * PCIX 20 - IRQ9,10,11,12 = PCI A-D
175 */
176
177 /* 2400
178 * Hawk 31
179 * ISA 11
180 * Univ 13
181 * eth 14 - IRQ2
182 * PMC1 16 - IRQ9,10,11,12 = PMC A-D
183 * PMC2 17 - IRQ12,9,10,11 = PMC A-D
184 * PCIX 20 - IRQ9,10,11,12 = PMC A-D
185 */
186
187 /* 2300
188 * Raven 31
189 * ISA 11
190 * Univ 13
191 * eth 14 - IRQ2
192 * PMC1 16 - 9,10,11,12 = A-D
193 * PMC2 17 - 9,10,11,12 = B,C,D,A
194 */
195
196 static char pci_irq_table[][4] =
197 /*
198 * MPIC interrupts for various IDSEL values (MPIC IRQ0 =
199 * Linux IRQ16 (to leave room for ISA IRQs at 0-15).
200 * PCI IDSEL/INTPIN->INTLINE
201 * A B C D
202 */
203 {
204 {19, 0, 0, 0}, /* IDSEL 12 - SCSI */
205 { 0, 0, 0, 0}, /* IDSEL 13 - Universe PCI - VME */
206 {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */
207 { 0, 0, 0, 0}, /* IDSEL 15 - unused */
208 {25, 26, 27, 28}, /* IDSEL 16 - PCI/PMC Slot 1P */
209 {28, 25, 26, 27}, /* IDSEL 17 - PCI/PMC Slot 2P */
210 {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */
211 {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */
212 {25, 26, 27, 28} /* IDSEL 20 - P2P Bridge */
213 };
214
215 const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
216 return PCI_IRQ_TABLE_LOOKUP;
217 }
218
219 #define MOTOROLA_CPUTYPE_REG 0x800
220 #define MOTOROLA_BASETYPE_REG 0x803
221 #define MPIC_RAVEN_ID 0x48010000
222 #define MPIC_HAWK_ID 0x48030000
223 #define MOT_PROC2_BIT 0x800
224
225 static u_char pplus_openpic_initsenses[] __initdata = {
226 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
227 (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */
228 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */
229 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
230 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */
231 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
232 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
233 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
234 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
235 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
236 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
237 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
238 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
239 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
240 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
241 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),
242 };
243
244 int mot_entry = -1;
245 int prep_keybd_present = 1;
246 int mot_multi = 0;
247
248 struct brd_info {
249 /* 0x100 mask assumes for Raven and Hawk boards that the level/edge
250 * are set */
251 int cpu_type;
252 /* 0x200 if this board has a Hawk chip. */
253 int base_type;
254 /* or'ed with 0x80 if this board should be checked for multi CPU */
255 int max_cpu;
256 const char *name;
257 int (*map_irq) (struct pci_dev *, unsigned char, unsigned char);
258 };
259 struct brd_info mot_info[] = {
260 {0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq},
261 {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq},
262 {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq},
263 {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq},
264 {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq},
265 {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq},
266 {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq},
267 {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq},
268 {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq},
269 {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq},
270 {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq},
271 {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq},
272 {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq},
273 {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq},
274 {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq},
275 {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq},
276 {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq},
277 {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq},
278 {0x000, 0x00, 0x00, "", NULL}
279 };
280
281 void __init pplus_set_board_type(void)
282 {
283 unsigned char cpu_type;
284 unsigned char base_mod;
285 int entry;
286 unsigned short devid;
287 unsigned long *ProcInfo = NULL;
288
289 cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
290 base_mod = inb(MOTOROLA_BASETYPE_REG);
291 early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
292
293 for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
294 /* Check for Hawk chip */
295 if (mot_info[entry].cpu_type & 0x200) {
296 if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK)
297 continue;
298 } else {
299 /* store the system config register for later use. */
300 ProcInfo =
301 (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4);
302
303 /* Check non hawk boards */
304 if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
305 continue;
306
307 if (mot_info[entry].base_type == 0) {
308 mot_entry = entry;
309 break;
310 }
311
312 if (mot_info[entry].base_type != base_mod)
313 continue;
314 }
315
316 if (!(mot_info[entry].max_cpu & 0x80)) {
317 mot_entry = entry;
318 break;
319 }
320
321 /* processor 1 not present and max processor zero indicated */
322 if ((*ProcInfo & MOT_PROC2_BIT)
323 && !(mot_info[entry].max_cpu & 0x7f)) {
324 mot_entry = entry;
325 break;
326 }
327
328 /* processor 1 present and max processor zero indicated */
329 if (!(*ProcInfo & MOT_PROC2_BIT)
330 && (mot_info[entry].max_cpu & 0x7f)) {
331 mot_entry = entry;
332 break;
333 }
334
335 /* Indicate to system if this is a multiprocessor board */
336 if (!(*ProcInfo & MOT_PROC2_BIT))
337 mot_multi = 1;
338 }
339
340 if (mot_entry == -1)
341 /* No particular cpu type found - assume Mesquite (MCP750) */
342 mot_entry = 1;
343
344 Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
345 ppc_md.pci_map_irq = mot_info[mot_entry].map_irq;
346 }
347 void __init pplus_pib_init(void)
348 {
349 unsigned char reg;
350 unsigned short short_reg;
351
352 struct pci_dev *dev = NULL;
353
354 /*
355 * Perform specific configuration for the Via Tech or
356 * or Winbond PCI-ISA-Bridge part.
357 */
358 if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
359 PCI_DEVICE_ID_VIA_82C586_1, dev))) {
360 /*
361 * PPCBUG does not set the enable bits
362 * for the IDE device. Force them on here.
363 */
364 pci_read_config_byte(dev, 0x40, &reg);
365
366 reg |= 0x03; /* IDE: Chip Enable Bits */
367 pci_write_config_byte(dev, 0x40, reg);
368 }
369
370 if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
371 PCI_DEVICE_ID_VIA_82C586_2,
372 dev)) && (dev->devfn = 0x5a)) {
373 /* Force correct USB interrupt */
374 dev->irq = 11;
375 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
376 }
377
378 if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
379 PCI_DEVICE_ID_WINBOND_83C553, dev))) {
380 /* Clear PCI Interrupt Routing Control Register. */
381 short_reg = 0x0000;
382 pci_write_config_word(dev, 0x44, short_reg);
383 /* Route IDE interrupts to IRQ 14 */
384 reg = 0xEE;
385 pci_write_config_byte(dev, 0x43, reg);
386 }
387
388 if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
389 PCI_DEVICE_ID_WINBOND_82C105, dev))) {
390 /*
391 * Disable LEGIRQ mode so PCI INTS are routed
392 * directly to the 8259 and enable both channels
393 */
394 pci_write_config_dword(dev, 0x40, 0x10ff0033);
395
396 /* Force correct IDE interrupt */
397 dev->irq = 14;
398 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
399 }
400 pci_dev_put(dev);
401 }
402
403 void __init pplus_set_VIA_IDE_legacy(void)
404 {
405 unsigned short vend, dev;
406
407 early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
408 early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
409
410 if ((vend == PCI_VENDOR_ID_VIA) &&
411 (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
412 unsigned char temp;
413
414 /* put back original "standard" port base addresses */
415 early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
416 PCI_BASE_ADDRESS_0, 0x1f1);
417 early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
418 PCI_BASE_ADDRESS_1, 0x3f5);
419 early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
420 PCI_BASE_ADDRESS_2, 0x171);
421 early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
422 PCI_BASE_ADDRESS_3, 0x375);
423 early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
424 PCI_BASE_ADDRESS_4, 0xcc01);
425
426 /* put into legacy mode */
427 early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
428 &temp);
429 temp &= ~0x05;
430 early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
431 temp);
432 }
433 }
434
435 void pplus_set_VIA_IDE_native(void)
436 {
437 unsigned short vend, dev;
438
439 early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
440 early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
441
442 if ((vend == PCI_VENDOR_ID_VIA) &&
443 (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
444 unsigned char temp;
445
446 /* put into native mode */
447 early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
448 &temp);
449 temp |= 0x05;
450 early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
451 temp);
452 }
453 }
454
455 void __init pplus_pcibios_fixup(void)
456 {
457
458 unsigned char reg;
459 unsigned short devid;
460 unsigned char base_mod;
461
462 printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n",
463 Motherboard_map_name);
464
465 /* Setup the Winbond or Via PIB */
466 pplus_pib_init();
467
468 /* Set up floppy in PS/2 mode */
469 outb(0x09, SIO_CONFIG_RA);
470 reg = inb(SIO_CONFIG_RD);
471 reg = (reg & 0x3F) | 0x40;
472 outb(reg, SIO_CONFIG_RD);
473 outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */
474
475 /* This is a hack. If this is a 2300 or 2400 mot board then there is
476 * no keyboard controller and we have to indicate that.
477 */
478
479 early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
480 base_mod = inb(MOTOROLA_BASETYPE_REG);
481 if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) ||
482 (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1))
483 prep_keybd_present = 0;
484 }
485
486 void __init pplus_find_bridges(void)
487 {
488 struct pci_controller *hose;
489
490 hose = pcibios_alloc_controller();
491 if (!hose)
492 return;
493
494 hose->first_busno = 0;
495 hose->last_busno = 0xff;
496
497 hose->pci_mem_offset = PREP_ISA_MEM_BASE;
498 hose->io_base_virt = (void *)PREP_ISA_IO_BASE;
499
500 pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START,
501 PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge");
502 pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START,
503 PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM,
504 "PCI host bridge");
505
506 hose->io_space.start = PPLUS_PCI_IO_START;
507 hose->io_space.end = PPLUS_PCI_IO_END;
508 hose->mem_space.start = PPLUS_PCI_MEM_START;
509 hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
510
511 if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
512 PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
513 PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
514 PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
515 != 0) {
516 printk(KERN_CRIT "Could not initialize host bridge\n");
517
518 }
519
520 pplus_set_VIA_IDE_legacy();
521
522 hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
523
524 ppc_md.pcibios_fixup = pplus_pcibios_fixup;
525 ppc_md.pci_swizzle = common_swizzle;
526 }
527
528 static int pplus_show_cpuinfo(struct seq_file *m)
529 {
530 seq_printf(m, "vendor\t\t: Motorola MCG\n");
531 seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
532
533 return 0;
534 }
535
536 static void __init pplus_setup_arch(void)
537 {
538 struct pci_controller *hose;
539
540 if (ppc_md.progress)
541 ppc_md.progress("pplus_setup_arch: enter", 0);
542
543 /* init to some ~sane value until calibrate_delay() runs */
544 loops_per_jiffy = 50000000;
545
546 if (ppc_md.progress)
547 ppc_md.progress("pplus_setup_arch: find_bridges", 0);
548
549 /* Setup PCI host bridge */
550 pplus_find_bridges();
551
552 hose = pci_bus_to_hose(0);
553 isa_io_base = (ulong) hose->io_base_virt;
554
555 if (ppc_md.progress)
556 ppc_md.progress("pplus_setup_arch: set_board_type", 0);
557
558 pplus_set_board_type();
559
560 /* Enable L2. Assume we don't need to flush -- Cort */
561 *(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;
562
563 #ifdef CONFIG_BLK_DEV_INITRD
564 if (initrd_start)
565 ROOT_DEV = Root_RAM0;
566 else
567 #endif
568 #ifdef CONFIG_ROOT_NFS
569 ROOT_DEV = Root_NFS;
570 #else
571 ROOT_DEV = Root_SDA2;
572 #endif
573
574 printk(KERN_INFO "Motorola PowerPlus Platform\n");
575 printk(KERN_INFO
576 "Port by MontaVista Software, Inc. (source@mvista.com)\n");
577
578 #ifdef CONFIG_VGA_CONSOLE
579 /* remap the VGA memory */
580 vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE,
581 0x08000000);
582 conswitchp = &vga_con;
583 #endif
584 #ifdef CONFIG_PPCBUG_NVRAM
585 /* Read in NVRAM data */
586 init_prep_nvram();
587
588 /* if no bootargs, look in NVRAM */
589 if (cmd_line[0] == '\0') {
590 char *bootargs;
591 bootargs = prep_nvram_get_var("bootargs");
592 if (bootargs != NULL) {
593 strcpy(cmd_line, bootargs);
594 /* again.. */
595 strcpy(boot_command_line, cmd_line);
596 }
597 }
598 #endif
599 if (ppc_md.progress)
600 ppc_md.progress("pplus_setup_arch: exit", 0);
601 }
602
603 static void pplus_restart(char *cmd)
604 {
605 unsigned long i = 10000;
606
607 local_irq_disable();
608
609 /* set VIA IDE controller into native mode */
610 pplus_set_VIA_IDE_native();
611
612 /* set exception prefix high - to the prom */
613 _nmask_and_or_msr(0, MSR_IP);
614
615 /* make sure bit 0 (reset) is a 0 */
616 outb(inb(0x92) & ~1L, 0x92);
617 /* signal a reset to system control port A - soft reset */
618 outb(inb(0x92) | 1, 0x92);
619
620 while (i != 0)
621 i++;
622 panic("restart failed\n");
623 }
624
625 static void pplus_halt(void)
626 {
627 /* set exception prefix high - to the prom */
628 _nmask_and_or_msr(MSR_EE, MSR_IP);
629
630 /* make sure bit 0 (reset) is a 0 */
631 outb(inb(0x92) & ~1L, 0x92);
632 /* signal a reset to system control port A - soft reset */
633 outb(inb(0x92) | 1, 0x92);
634
635 while (1) ;
636 /*
637 * Not reached
638 */
639 }
640
641 static void pplus_power_off(void)
642 {
643 pplus_halt();
644 }
645
646 static void __init pplus_init_IRQ(void)
647 {
648 int i;
649
650 if (ppc_md.progress)
651 ppc_md.progress("init_irq: enter", 0);
652
653 OpenPIC_InitSenses = pplus_openpic_initsenses;
654 OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses);
655
656 if (OpenPIC_Addr != NULL) {
657
658 openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
659 openpic_init(NUM_8259_INTERRUPTS);
660 openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
661 i8259_irq);
662 ppc_md.get_irq = openpic_get_irq;
663 }
664
665 i8259_init(0, 0);
666
667 if (ppc_md.progress)
668 ppc_md.progress("init_irq: exit", 0);
669 }
670
671 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
672 /*
673 * IDE stuff.
674 */
675 static int pplus_ide_default_irq(unsigned long base)
676 {
677 switch (base) {
678 case 0x1f0:
679 return 14;
680 case 0x170:
681 return 15;
682 default:
683 return 0;
684 }
685 }
686
687 static unsigned long pplus_ide_default_io_base(int index)
688 {
689 switch (index) {
690 case 0:
691 return 0x1f0;
692 case 1:
693 return 0x170;
694 default:
695 return 0;
696 }
697 }
698
699 static void __init
700 pplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
701 unsigned long ctrl_port, int *irq)
702 {
703 unsigned long reg = data_port;
704 int i;
705
706 for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
707 hw->io_ports[i] = reg;
708 reg += 1;
709 }
710
711 if (ctrl_port)
712 hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
713 else
714 hw->io_ports[IDE_CONTROL_OFFSET] =
715 hw->io_ports[IDE_DATA_OFFSET] + 0x206;
716
717 if (irq != NULL)
718 *irq = pplus_ide_default_irq(data_port);
719 }
720 #endif
721
722 #ifdef CONFIG_SMP
723 /* PowerPlus (MTX) support */
724 static int __init smp_pplus_probe(void)
725 {
726 extern int mot_multi;
727
728 if (mot_multi) {
729 openpic_request_IPIs();
730 smp_hw_index[1] = 1;
731 return 2;
732 }
733
734 return 1;
735 }
736
737 static void __init smp_pplus_kick_cpu(int nr)
738 {
739 *(unsigned long *)KERNELBASE = nr;
740 asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
741 printk(KERN_INFO "CPU1 reset, waiting\n");
742 }
743
744 static void __init smp_pplus_setup_cpu(int cpu_nr)
745 {
746 if (OpenPIC_Addr)
747 do_openpic_setup_cpu();
748 }
749
750 static struct smp_ops_t pplus_smp_ops = {
751 smp_openpic_message_pass,
752 smp_pplus_probe,
753 smp_pplus_kick_cpu,
754 smp_pplus_setup_cpu,
755 .give_timebase = smp_generic_give_timebase,
756 .take_timebase = smp_generic_take_timebase,
757 };
758 #endif /* CONFIG_SMP */
759
760 #ifdef DUMP_DBATS
761 static void print_dbat(int idx, u32 bat)
762 {
763
764 char str[64];
765
766 sprintf(str, "DBAT%c%c = 0x%08x\n",
767 (char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat);
768 ppc_md.progress(str, 0);
769 }
770
771 #define DUMP_DBAT(x) \
772 do { \
773 u32 __temp = mfspr(x);\
774 print_dbat(x, __temp); \
775 } while (0)
776
777 static void dump_dbats(void)
778 {
779 if (ppc_md.progress) {
780 DUMP_DBAT(DBAT0U);
781 DUMP_DBAT(DBAT0L);
782 DUMP_DBAT(DBAT1U);
783 DUMP_DBAT(DBAT1L);
784 DUMP_DBAT(DBAT2U);
785 DUMP_DBAT(DBAT2L);
786 DUMP_DBAT(DBAT3U);
787 DUMP_DBAT(DBAT3L);
788 }
789 }
790 #endif
791
792 static unsigned long __init pplus_find_end_of_memory(void)
793 {
794 unsigned long total;
795
796 if (ppc_md.progress)
797 ppc_md.progress("pplus_find_end_of_memory", 0);
798
799 #ifdef DUMP_DBATS
800 dump_dbats();
801 #endif
802
803 total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
804 return (total);
805 }
806
807 static void __init pplus_map_io(void)
808 {
809 io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000,
810 _PAGE_IO);
811 io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);
812 }
813
814 static void __init pplus_init2(void)
815 {
816 #ifdef CONFIG_NVRAM
817 request_region(PREP_NVRAM_AS0, 0x8, "nvram");
818 #endif
819 request_region(0x20, 0x20, "pic1");
820 request_region(0xa0, 0x20, "pic2");
821 request_region(0x00, 0x20, "dma1");
822 request_region(0x40, 0x20, "timer");
823 request_region(0x80, 0x10, "dma page reg");
824 request_region(0xc0, 0x20, "dma2");
825 }
826
827 /*
828 * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
829 * to 0xf0000000 to access Falcon/Raven or Hawk registers
830 */
831 static __inline__ void pplus_set_bat(void)
832 {
833 /* wait for all outstanding memory accesses to complete */
834 mb();
835
836 /* setup DBATs */
837 mtspr(SPRN_DBAT2U, 0x80001ffe);
838 mtspr(SPRN_DBAT2L, 0x8000002a);
839 mtspr(SPRN_DBAT3U, 0xf0001ffe);
840 mtspr(SPRN_DBAT3L, 0xf000002a);
841
842 /* wait for updates */
843 mb();
844 }
845
846 void __init
847 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
848 unsigned long r6, unsigned long r7)
849 {
850 parse_bootinfo(find_bootinfo());
851
852 /* Map in board regs, etc. */
853 pplus_set_bat();
854
855 isa_io_base = PREP_ISA_IO_BASE;
856 isa_mem_base = PREP_ISA_MEM_BASE;
857 pci_dram_offset = PREP_PCI_DRAM_OFFSET;
858 ISA_DMA_THRESHOLD = 0x00ffffff;
859 DMA_MODE_READ = 0x44;
860 DMA_MODE_WRITE = 0x48;
861 ppc_do_canonicalize_irqs = 1;
862
863 ppc_md.setup_arch = pplus_setup_arch;
864 ppc_md.show_cpuinfo = pplus_show_cpuinfo;
865 ppc_md.init_IRQ = pplus_init_IRQ;
866 /* this gets changed later on if we have an OpenPIC -- Cort */
867 ppc_md.get_irq = i8259_irq;
868 ppc_md.init = pplus_init2;
869
870 ppc_md.restart = pplus_restart;
871 ppc_md.power_off = pplus_power_off;
872 ppc_md.halt = pplus_halt;
873
874 TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
875 PREP_NVRAM_DATA, 8);
876
877 ppc_md.time_init = todc_time_init;
878 ppc_md.set_rtc_time = todc_set_rtc_time;
879 ppc_md.get_rtc_time = todc_get_rtc_time;
880 ppc_md.calibrate_decr = todc_calibrate_decr;
881 ppc_md.nvram_read_val = todc_m48txx_read_val;
882 ppc_md.nvram_write_val = todc_m48txx_write_val;
883
884 ppc_md.find_end_of_memory = pplus_find_end_of_memory;
885 ppc_md.setup_io_mappings = pplus_map_io;
886
887 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
888 ppc_ide_md.default_irq = pplus_ide_default_irq;
889 ppc_ide_md.default_io_base = pplus_ide_default_io_base;
890 ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;
891 #endif
892
893 #ifdef CONFIG_SERIAL_TEXT_DEBUG
894 ppc_md.progress = gen550_progress;
895 #endif /* CONFIG_SERIAL_TEXT_DEBUG */
896 #ifdef CONFIG_KGDB
897 ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
898 #endif
899 #ifdef CONFIG_SMP
900 smp_ops = &pplus_smp_ops;
901 #endif /* CONFIG_SMP */
902 }
Stable & featurefull patchset based on Linus's git branch