include/asm-x86/vic.h

   1 /* Copyright (C) 1999,2001
   2  *
   3  * Author: J.E.J.Bottomley@HansenPartnership.com
   4  *
   5  * Standard include definitions for the NCR Voyager Interrupt Controller */
   6
   7 /* The eight CPI vectors.  To activate a CPI, you write a bit mask
   8  * corresponding to the processor set to be interrupted into the
   9  * relevant register.  That set of CPUs will then be interrupted with
  10  * the CPI */
  11 static const int VIC_CPI_Registers[] =
  12         {0xFC00, 0xFC01, 0xFC08, 0xFC09,
  13          0xFC10, 0xFC11, 0xFC18, 0xFC19 };
  14
  15 #define VIC_PROC_WHO_AM_I               0xfc29
  16 #       define  QUAD_IDENTIFIER         0xC0
  17 #       define  EIGHT_SLOT_IDENTIFIER   0xE0
  18 #define QIC_EXTENDED_PROCESSOR_SELECT   0xFC72
  19 #define VIC_CPI_BASE_REGISTER           0xFC41
  20 #define VIC_PROCESSOR_ID                0xFC21
  21 #       define VIC_CPU_MASQUERADE_ENABLE 0x8
  22
  23 #define VIC_CLAIM_REGISTER_0            0xFC38
  24 #define VIC_CLAIM_REGISTER_1            0xFC39
  25 #define VIC_REDIRECT_REGISTER_0         0xFC60
  26 #define VIC_REDIRECT_REGISTER_1         0xFC61
  27 #define VIC_PRIORITY_REGISTER           0xFC20
  28
  29 #define VIC_PRIMARY_MC_BASE             0xFC48
  30 #define VIC_SECONDARY_MC_BASE           0xFC49
  31
  32 #define QIC_PROCESSOR_ID                0xFC71
  33 #       define  QIC_CPUID_ENABLE        0x08
  34
  35 #define QIC_VIC_CPI_BASE_REGISTER       0xFC79
  36 #define QIC_CPI_BASE_REGISTER           0xFC7A
  37
  38 #define QIC_MASK_REGISTER0              0xFC80
  39 /* NOTE: these are masked high, enabled low */
  40 #       define QIC_PERF_TIMER           0x01
  41 #       define QIC_LPE                  0x02
  42 #       define QIC_SYS_INT              0x04
  43 #       define QIC_CMN_INT              0x08
  44 /* at the moment, just enable CMN_INT, disable SYS_INT */
  45 #       define QIC_DEFAULT_MASK0        (~(QIC_CMN_INT /* | VIC_SYS_INT */))
  46 #define QIC_MASK_REGISTER1              0xFC81
  47 #       define QIC_BOOT_CPI_MASK        0xFE
  48 /* Enable CPI's 1-6 inclusive */
  49 #       define QIC_CPI_ENABLE           0x81
  50
  51 #define QIC_INTERRUPT_CLEAR0            0xFC8A
  52 #define QIC_INTERRUPT_CLEAR1            0xFC8B
  53
  54 /* this is where we place the CPI vectors */
  55 #define VIC_DEFAULT_CPI_BASE            0xC0
  56 /* this is where we place the QIC CPI vectors */
  57 #define QIC_DEFAULT_CPI_BASE            0xD0
  58
  59 #define VIC_BOOT_INTERRUPT_MASK         0xfe
  60
  61 extern void smp_vic_timer_interrupt(void);