x86, cleanup: Remove obsolete boot_cpu_id variable
[linux-2.6/x86.git] / kernel / sysctl.c
blobca38e8e3e907557f74faaad7ddb57d330bd43d2d
1 /*
2 * sysctl.c: General linux system control interface
4 * Begun 24 March 1995, Stephen Tweedie
5 * Added /proc support, Dec 1995
6 * Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas.
7 * Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver.
8 * Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver.
9 * Dynamic registration fixes, Stephen Tweedie.
10 * Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn.
11 * Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris
12 * Horn.
13 * Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer.
14 * Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer.
15 * Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill
16 * Wendling.
17 * The list_for_each() macro wasn't appropriate for the sysctl loop.
18 * Removed it and replaced it with older style, 03/23/00, Bill Wendling
21 #include <linux/module.h>
22 #include <linux/mm.h>
23 #include <linux/swap.h>
24 #include <linux/slab.h>
25 #include <linux/sysctl.h>
26 #include <linux/signal.h>
27 #include <linux/proc_fs.h>
28 #include <linux/security.h>
29 #include <linux/ctype.h>
30 #include <linux/kmemcheck.h>
31 #include <linux/fs.h>
32 #include <linux/init.h>
33 #include <linux/kernel.h>
34 #include <linux/kobject.h>
35 #include <linux/net.h>
36 #include <linux/sysrq.h>
37 #include <linux/highuid.h>
38 #include <linux/writeback.h>
39 #include <linux/ratelimit.h>
40 #include <linux/compaction.h>
41 #include <linux/hugetlb.h>
42 #include <linux/initrd.h>
43 #include <linux/key.h>
44 #include <linux/times.h>
45 #include <linux/limits.h>
46 #include <linux/dcache.h>
47 #include <linux/dnotify.h>
48 #include <linux/syscalls.h>
49 #include <linux/vmstat.h>
50 #include <linux/nfs_fs.h>
51 #include <linux/acpi.h>
52 #include <linux/reboot.h>
53 #include <linux/ftrace.h>
54 #include <linux/perf_event.h>
55 #include <linux/kprobes.h>
56 #include <linux/pipe_fs_i.h>
57 #include <linux/oom.h>
59 #include <asm/uaccess.h>
60 #include <asm/processor.h>
62 #ifdef CONFIG_X86
63 #include <asm/nmi.h>
64 #include <asm/stacktrace.h>
65 #include <asm/io.h>
66 #endif
67 #ifdef CONFIG_BSD_PROCESS_ACCT
68 #include <linux/acct.h>
69 #endif
70 #ifdef CONFIG_RT_MUTEXES
71 #include <linux/rtmutex.h>
72 #endif
73 #if defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_LOCK_STAT)
74 #include <linux/lockdep.h>
75 #endif
76 #ifdef CONFIG_CHR_DEV_SG
77 #include <scsi/sg.h>
78 #endif
80 #ifdef CONFIG_LOCKUP_DETECTOR
81 #include <linux/nmi.h>
82 #endif
85 #if defined(CONFIG_SYSCTL)
87 /* External variables not in a header file. */
88 extern int sysctl_overcommit_memory;
89 extern int sysctl_overcommit_ratio;
90 extern int max_threads;
91 extern int core_uses_pid;
92 extern int suid_dumpable;
93 extern char core_pattern[];
94 extern unsigned int core_pipe_limit;
95 extern int pid_max;
96 extern int min_free_kbytes;
97 extern int pid_max_min, pid_max_max;
98 extern int sysctl_drop_caches;
99 extern int percpu_pagelist_fraction;
100 extern int compat_log;
101 extern int latencytop_enabled;
102 extern int sysctl_nr_open_min, sysctl_nr_open_max;
103 #ifndef CONFIG_MMU
104 extern int sysctl_nr_trim_pages;
105 #endif
106 #ifdef CONFIG_BLOCK
107 extern int blk_iopoll_enabled;
108 #endif
110 /* Constants used for minimum and maximum */
111 #ifdef CONFIG_LOCKUP_DETECTOR
112 static int sixty = 60;
113 static int neg_one = -1;
114 #endif
116 static int zero;
117 static int __maybe_unused one = 1;
118 static int __maybe_unused two = 2;
119 static unsigned long one_ul = 1;
120 static int one_hundred = 100;
121 #ifdef CONFIG_PRINTK
122 static int ten_thousand = 10000;
123 #endif
125 /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
126 static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
128 /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
129 static int maxolduid = 65535;
130 static int minolduid;
131 static int min_percpu_pagelist_fract = 8;
133 static int ngroups_max = NGROUPS_MAX;
135 #ifdef CONFIG_INOTIFY_USER
136 #include <linux/inotify.h>
137 #endif
138 #ifdef CONFIG_SPARC
139 #include <asm/system.h>
140 #endif
142 #ifdef CONFIG_SPARC64
143 extern int sysctl_tsb_ratio;
144 #endif
146 #ifdef __hppa__
147 extern int pwrsw_enabled;
148 extern int unaligned_enabled;
149 #endif
151 #ifdef CONFIG_S390
152 #ifdef CONFIG_MATHEMU
153 extern int sysctl_ieee_emulation_warnings;
154 #endif
155 extern int sysctl_userprocess_debug;
156 extern int spin_retry;
157 #endif
159 #ifdef CONFIG_IA64
160 extern int no_unaligned_warning;
161 extern int unaligned_dump_stack;
162 #endif
164 extern struct ratelimit_state printk_ratelimit_state;
166 #ifdef CONFIG_PROC_SYSCTL
167 static int proc_do_cad_pid(struct ctl_table *table, int write,
168 void __user *buffer, size_t *lenp, loff_t *ppos);
169 static int proc_taint(struct ctl_table *table, int write,
170 void __user *buffer, size_t *lenp, loff_t *ppos);
171 #endif
173 #ifdef CONFIG_MAGIC_SYSRQ
174 static int __sysrq_enabled; /* Note: sysrq code ises it's own private copy */
176 static int sysrq_sysctl_handler(ctl_table *table, int write,
177 void __user *buffer, size_t *lenp,
178 loff_t *ppos)
180 int error;
182 error = proc_dointvec(table, write, buffer, lenp, ppos);
183 if (error)
184 return error;
186 if (write)
187 sysrq_toggle_support(__sysrq_enabled);
189 return 0;
192 #endif
194 static struct ctl_table root_table[];
195 static struct ctl_table_root sysctl_table_root;
196 static struct ctl_table_header root_table_header = {
197 .count = 1,
198 .ctl_table = root_table,
199 .ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
200 .root = &sysctl_table_root,
201 .set = &sysctl_table_root.default_set,
203 static struct ctl_table_root sysctl_table_root = {
204 .root_list = LIST_HEAD_INIT(sysctl_table_root.root_list),
205 .default_set.list = LIST_HEAD_INIT(root_table_header.ctl_entry),
208 static struct ctl_table kern_table[];
209 static struct ctl_table vm_table[];
210 static struct ctl_table fs_table[];
211 static struct ctl_table debug_table[];
212 static struct ctl_table dev_table[];
213 extern struct ctl_table random_table[];
214 #ifdef CONFIG_EPOLL
215 extern struct ctl_table epoll_table[];
216 #endif
218 #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
219 int sysctl_legacy_va_layout;
220 #endif
222 /* The default sysctl tables: */
224 static struct ctl_table root_table[] = {
226 .procname = "kernel",
227 .mode = 0555,
228 .child = kern_table,
231 .procname = "vm",
232 .mode = 0555,
233 .child = vm_table,
236 .procname = "fs",
237 .mode = 0555,
238 .child = fs_table,
241 .procname = "debug",
242 .mode = 0555,
243 .child = debug_table,
246 .procname = "dev",
247 .mode = 0555,
248 .child = dev_table,
251 * NOTE: do not add new entries to this table unless you have read
252 * Documentation/sysctl/ctl_unnumbered.txt
257 #ifdef CONFIG_SCHED_DEBUG
258 static int min_sched_granularity_ns = 100000; /* 100 usecs */
259 static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */
260 static int min_wakeup_granularity_ns; /* 0 usecs */
261 static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */
262 static int min_sched_tunable_scaling = SCHED_TUNABLESCALING_NONE;
263 static int max_sched_tunable_scaling = SCHED_TUNABLESCALING_END-1;
264 static int min_sched_shares_ratelimit = 100000; /* 100 usec */
265 static int max_sched_shares_ratelimit = NSEC_PER_SEC; /* 1 second */
266 #endif
268 #ifdef CONFIG_COMPACTION
269 static int min_extfrag_threshold;
270 static int max_extfrag_threshold = 1000;
271 #endif
273 static struct ctl_table kern_table[] = {
275 .procname = "sched_child_runs_first",
276 .data = &sysctl_sched_child_runs_first,
277 .maxlen = sizeof(unsigned int),
278 .mode = 0644,
279 .proc_handler = proc_dointvec,
281 #ifdef CONFIG_SCHED_DEBUG
283 .procname = "sched_min_granularity_ns",
284 .data = &sysctl_sched_min_granularity,
285 .maxlen = sizeof(unsigned int),
286 .mode = 0644,
287 .proc_handler = sched_proc_update_handler,
288 .extra1 = &min_sched_granularity_ns,
289 .extra2 = &max_sched_granularity_ns,
292 .procname = "sched_latency_ns",
293 .data = &sysctl_sched_latency,
294 .maxlen = sizeof(unsigned int),
295 .mode = 0644,
296 .proc_handler = sched_proc_update_handler,
297 .extra1 = &min_sched_granularity_ns,
298 .extra2 = &max_sched_granularity_ns,
301 .procname = "sched_wakeup_granularity_ns",
302 .data = &sysctl_sched_wakeup_granularity,
303 .maxlen = sizeof(unsigned int),
304 .mode = 0644,
305 .proc_handler = sched_proc_update_handler,
306 .extra1 = &min_wakeup_granularity_ns,
307 .extra2 = &max_wakeup_granularity_ns,
310 .procname = "sched_shares_ratelimit",
311 .data = &sysctl_sched_shares_ratelimit,
312 .maxlen = sizeof(unsigned int),
313 .mode = 0644,
314 .proc_handler = sched_proc_update_handler,
315 .extra1 = &min_sched_shares_ratelimit,
316 .extra2 = &max_sched_shares_ratelimit,
319 .procname = "sched_tunable_scaling",
320 .data = &sysctl_sched_tunable_scaling,
321 .maxlen = sizeof(enum sched_tunable_scaling),
322 .mode = 0644,
323 .proc_handler = sched_proc_update_handler,
324 .extra1 = &min_sched_tunable_scaling,
325 .extra2 = &max_sched_tunable_scaling,
328 .procname = "sched_shares_thresh",
329 .data = &sysctl_sched_shares_thresh,
330 .maxlen = sizeof(unsigned int),
331 .mode = 0644,
332 .proc_handler = proc_dointvec_minmax,
333 .extra1 = &zero,
336 .procname = "sched_migration_cost",
337 .data = &sysctl_sched_migration_cost,
338 .maxlen = sizeof(unsigned int),
339 .mode = 0644,
340 .proc_handler = proc_dointvec,
343 .procname = "sched_nr_migrate",
344 .data = &sysctl_sched_nr_migrate,
345 .maxlen = sizeof(unsigned int),
346 .mode = 0644,
347 .proc_handler = proc_dointvec,
350 .procname = "sched_time_avg",
351 .data = &sysctl_sched_time_avg,
352 .maxlen = sizeof(unsigned int),
353 .mode = 0644,
354 .proc_handler = proc_dointvec,
357 .procname = "timer_migration",
358 .data = &sysctl_timer_migration,
359 .maxlen = sizeof(unsigned int),
360 .mode = 0644,
361 .proc_handler = proc_dointvec_minmax,
362 .extra1 = &zero,
363 .extra2 = &one,
365 #endif
367 .procname = "sched_rt_period_us",
368 .data = &sysctl_sched_rt_period,
369 .maxlen = sizeof(unsigned int),
370 .mode = 0644,
371 .proc_handler = sched_rt_handler,
374 .procname = "sched_rt_runtime_us",
375 .data = &sysctl_sched_rt_runtime,
376 .maxlen = sizeof(int),
377 .mode = 0644,
378 .proc_handler = sched_rt_handler,
381 .procname = "sched_compat_yield",
382 .data = &sysctl_sched_compat_yield,
383 .maxlen = sizeof(unsigned int),
384 .mode = 0644,
385 .proc_handler = proc_dointvec,
387 #ifdef CONFIG_PROVE_LOCKING
389 .procname = "prove_locking",
390 .data = &prove_locking,
391 .maxlen = sizeof(int),
392 .mode = 0644,
393 .proc_handler = proc_dointvec,
395 #endif
396 #ifdef CONFIG_LOCK_STAT
398 .procname = "lock_stat",
399 .data = &lock_stat,
400 .maxlen = sizeof(int),
401 .mode = 0644,
402 .proc_handler = proc_dointvec,
404 #endif
406 .procname = "panic",
407 .data = &panic_timeout,
408 .maxlen = sizeof(int),
409 .mode = 0644,
410 .proc_handler = proc_dointvec,
413 .procname = "core_uses_pid",
414 .data = &core_uses_pid,
415 .maxlen = sizeof(int),
416 .mode = 0644,
417 .proc_handler = proc_dointvec,
420 .procname = "core_pattern",
421 .data = core_pattern,
422 .maxlen = CORENAME_MAX_SIZE,
423 .mode = 0644,
424 .proc_handler = proc_dostring,
427 .procname = "core_pipe_limit",
428 .data = &core_pipe_limit,
429 .maxlen = sizeof(unsigned int),
430 .mode = 0644,
431 .proc_handler = proc_dointvec,
433 #ifdef CONFIG_PROC_SYSCTL
435 .procname = "tainted",
436 .maxlen = sizeof(long),
437 .mode = 0644,
438 .proc_handler = proc_taint,
440 #endif
441 #ifdef CONFIG_LATENCYTOP
443 .procname = "latencytop",
444 .data = &latencytop_enabled,
445 .maxlen = sizeof(int),
446 .mode = 0644,
447 .proc_handler = proc_dointvec,
449 #endif
450 #ifdef CONFIG_BLK_DEV_INITRD
452 .procname = "real-root-dev",
453 .data = &real_root_dev,
454 .maxlen = sizeof(int),
455 .mode = 0644,
456 .proc_handler = proc_dointvec,
458 #endif
460 .procname = "print-fatal-signals",
461 .data = &print_fatal_signals,
462 .maxlen = sizeof(int),
463 .mode = 0644,
464 .proc_handler = proc_dointvec,
466 #ifdef CONFIG_SPARC
468 .procname = "reboot-cmd",
469 .data = reboot_command,
470 .maxlen = 256,
471 .mode = 0644,
472 .proc_handler = proc_dostring,
475 .procname = "stop-a",
476 .data = &stop_a_enabled,
477 .maxlen = sizeof (int),
478 .mode = 0644,
479 .proc_handler = proc_dointvec,
482 .procname = "scons-poweroff",
483 .data = &scons_pwroff,
484 .maxlen = sizeof (int),
485 .mode = 0644,
486 .proc_handler = proc_dointvec,
488 #endif
489 #ifdef CONFIG_SPARC64
491 .procname = "tsb-ratio",
492 .data = &sysctl_tsb_ratio,
493 .maxlen = sizeof (int),
494 .mode = 0644,
495 .proc_handler = proc_dointvec,
497 #endif
498 #ifdef __hppa__
500 .procname = "soft-power",
501 .data = &pwrsw_enabled,
502 .maxlen = sizeof (int),
503 .mode = 0644,
504 .proc_handler = proc_dointvec,
507 .procname = "unaligned-trap",
508 .data = &unaligned_enabled,
509 .maxlen = sizeof (int),
510 .mode = 0644,
511 .proc_handler = proc_dointvec,
513 #endif
515 .procname = "ctrl-alt-del",
516 .data = &C_A_D,
517 .maxlen = sizeof(int),
518 .mode = 0644,
519 .proc_handler = proc_dointvec,
521 #ifdef CONFIG_FUNCTION_TRACER
523 .procname = "ftrace_enabled",
524 .data = &ftrace_enabled,
525 .maxlen = sizeof(int),
526 .mode = 0644,
527 .proc_handler = ftrace_enable_sysctl,
529 #endif
530 #ifdef CONFIG_STACK_TRACER
532 .procname = "stack_tracer_enabled",
533 .data = &stack_tracer_enabled,
534 .maxlen = sizeof(int),
535 .mode = 0644,
536 .proc_handler = stack_trace_sysctl,
538 #endif
539 #ifdef CONFIG_TRACING
541 .procname = "ftrace_dump_on_oops",
542 .data = &ftrace_dump_on_oops,
543 .maxlen = sizeof(int),
544 .mode = 0644,
545 .proc_handler = proc_dointvec,
547 #endif
548 #ifdef CONFIG_MODULES
550 .procname = "modprobe",
551 .data = &modprobe_path,
552 .maxlen = KMOD_PATH_LEN,
553 .mode = 0644,
554 .proc_handler = proc_dostring,
557 .procname = "modules_disabled",
558 .data = &modules_disabled,
559 .maxlen = sizeof(int),
560 .mode = 0644,
561 /* only handle a transition from default "0" to "1" */
562 .proc_handler = proc_dointvec_minmax,
563 .extra1 = &one,
564 .extra2 = &one,
566 #endif
567 #ifdef CONFIG_HOTPLUG
569 .procname = "hotplug",
570 .data = &uevent_helper,
571 .maxlen = UEVENT_HELPER_PATH_LEN,
572 .mode = 0644,
573 .proc_handler = proc_dostring,
575 #endif
576 #ifdef CONFIG_CHR_DEV_SG
578 .procname = "sg-big-buff",
579 .data = &sg_big_buff,
580 .maxlen = sizeof (int),
581 .mode = 0444,
582 .proc_handler = proc_dointvec,
584 #endif
585 #ifdef CONFIG_BSD_PROCESS_ACCT
587 .procname = "acct",
588 .data = &acct_parm,
589 .maxlen = 3*sizeof(int),
590 .mode = 0644,
591 .proc_handler = proc_dointvec,
593 #endif
594 #ifdef CONFIG_MAGIC_SYSRQ
596 .procname = "sysrq",
597 .data = &__sysrq_enabled,
598 .maxlen = sizeof (int),
599 .mode = 0644,
600 .proc_handler = sysrq_sysctl_handler,
602 #endif
603 #ifdef CONFIG_PROC_SYSCTL
605 .procname = "cad_pid",
606 .data = NULL,
607 .maxlen = sizeof (int),
608 .mode = 0600,
609 .proc_handler = proc_do_cad_pid,
611 #endif
613 .procname = "threads-max",
614 .data = &max_threads,
615 .maxlen = sizeof(int),
616 .mode = 0644,
617 .proc_handler = proc_dointvec,
620 .procname = "random",
621 .mode = 0555,
622 .child = random_table,
625 .procname = "overflowuid",
626 .data = &overflowuid,
627 .maxlen = sizeof(int),
628 .mode = 0644,
629 .proc_handler = proc_dointvec_minmax,
630 .extra1 = &minolduid,
631 .extra2 = &maxolduid,
634 .procname = "overflowgid",
635 .data = &overflowgid,
636 .maxlen = sizeof(int),
637 .mode = 0644,
638 .proc_handler = proc_dointvec_minmax,
639 .extra1 = &minolduid,
640 .extra2 = &maxolduid,
642 #ifdef CONFIG_S390
643 #ifdef CONFIG_MATHEMU
645 .procname = "ieee_emulation_warnings",
646 .data = &sysctl_ieee_emulation_warnings,
647 .maxlen = sizeof(int),
648 .mode = 0644,
649 .proc_handler = proc_dointvec,
651 #endif
653 .procname = "userprocess_debug",
654 .data = &show_unhandled_signals,
655 .maxlen = sizeof(int),
656 .mode = 0644,
657 .proc_handler = proc_dointvec,
659 #endif
661 .procname = "pid_max",
662 .data = &pid_max,
663 .maxlen = sizeof (int),
664 .mode = 0644,
665 .proc_handler = proc_dointvec_minmax,
666 .extra1 = &pid_max_min,
667 .extra2 = &pid_max_max,
670 .procname = "panic_on_oops",
671 .data = &panic_on_oops,
672 .maxlen = sizeof(int),
673 .mode = 0644,
674 .proc_handler = proc_dointvec,
676 #if defined CONFIG_PRINTK
678 .procname = "printk",
679 .data = &console_loglevel,
680 .maxlen = 4*sizeof(int),
681 .mode = 0644,
682 .proc_handler = proc_dointvec,
685 .procname = "printk_ratelimit",
686 .data = &printk_ratelimit_state.interval,
687 .maxlen = sizeof(int),
688 .mode = 0644,
689 .proc_handler = proc_dointvec_jiffies,
692 .procname = "printk_ratelimit_burst",
693 .data = &printk_ratelimit_state.burst,
694 .maxlen = sizeof(int),
695 .mode = 0644,
696 .proc_handler = proc_dointvec,
699 .procname = "printk_delay",
700 .data = &printk_delay_msec,
701 .maxlen = sizeof(int),
702 .mode = 0644,
703 .proc_handler = proc_dointvec_minmax,
704 .extra1 = &zero,
705 .extra2 = &ten_thousand,
707 #endif
709 .procname = "ngroups_max",
710 .data = &ngroups_max,
711 .maxlen = sizeof (int),
712 .mode = 0444,
713 .proc_handler = proc_dointvec,
715 #if defined(CONFIG_LOCKUP_DETECTOR)
717 .procname = "watchdog",
718 .data = &watchdog_enabled,
719 .maxlen = sizeof (int),
720 .mode = 0644,
721 .proc_handler = proc_dowatchdog_enabled,
724 .procname = "watchdog_thresh",
725 .data = &softlockup_thresh,
726 .maxlen = sizeof(int),
727 .mode = 0644,
728 .proc_handler = proc_dowatchdog_thresh,
729 .extra1 = &neg_one,
730 .extra2 = &sixty,
733 .procname = "softlockup_panic",
734 .data = &softlockup_panic,
735 .maxlen = sizeof(int),
736 .mode = 0644,
737 .proc_handler = proc_dointvec_minmax,
738 .extra1 = &zero,
739 .extra2 = &one,
741 #endif
742 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
744 .procname = "unknown_nmi_panic",
745 .data = &unknown_nmi_panic,
746 .maxlen = sizeof (int),
747 .mode = 0644,
748 .proc_handler = proc_dointvec,
751 .procname = "nmi_watchdog",
752 .data = &nmi_watchdog_enabled,
753 .maxlen = sizeof (int),
754 .mode = 0644,
755 .proc_handler = proc_nmi_enabled,
757 #endif
758 #if defined(CONFIG_X86)
760 .procname = "panic_on_unrecovered_nmi",
761 .data = &panic_on_unrecovered_nmi,
762 .maxlen = sizeof(int),
763 .mode = 0644,
764 .proc_handler = proc_dointvec,
767 .procname = "panic_on_io_nmi",
768 .data = &panic_on_io_nmi,
769 .maxlen = sizeof(int),
770 .mode = 0644,
771 .proc_handler = proc_dointvec,
774 .procname = "bootloader_type",
775 .data = &bootloader_type,
776 .maxlen = sizeof (int),
777 .mode = 0444,
778 .proc_handler = proc_dointvec,
781 .procname = "bootloader_version",
782 .data = &bootloader_version,
783 .maxlen = sizeof (int),
784 .mode = 0444,
785 .proc_handler = proc_dointvec,
788 .procname = "kstack_depth_to_print",
789 .data = &kstack_depth_to_print,
790 .maxlen = sizeof(int),
791 .mode = 0644,
792 .proc_handler = proc_dointvec,
795 .procname = "io_delay_type",
796 .data = &io_delay_type,
797 .maxlen = sizeof(int),
798 .mode = 0644,
799 .proc_handler = proc_dointvec,
801 #endif
802 #if defined(CONFIG_MMU)
804 .procname = "randomize_va_space",
805 .data = &randomize_va_space,
806 .maxlen = sizeof(int),
807 .mode = 0644,
808 .proc_handler = proc_dointvec,
810 #endif
811 #if defined(CONFIG_S390) && defined(CONFIG_SMP)
813 .procname = "spin_retry",
814 .data = &spin_retry,
815 .maxlen = sizeof (int),
816 .mode = 0644,
817 .proc_handler = proc_dointvec,
819 #endif
820 #if defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
822 .procname = "acpi_video_flags",
823 .data = &acpi_realmode_flags,
824 .maxlen = sizeof (unsigned long),
825 .mode = 0644,
826 .proc_handler = proc_doulongvec_minmax,
828 #endif
829 #ifdef CONFIG_IA64
831 .procname = "ignore-unaligned-usertrap",
832 .data = &no_unaligned_warning,
833 .maxlen = sizeof (int),
834 .mode = 0644,
835 .proc_handler = proc_dointvec,
838 .procname = "unaligned-dump-stack",
839 .data = &unaligned_dump_stack,
840 .maxlen = sizeof (int),
841 .mode = 0644,
842 .proc_handler = proc_dointvec,
844 #endif
845 #ifdef CONFIG_DETECT_HUNG_TASK
847 .procname = "hung_task_panic",
848 .data = &sysctl_hung_task_panic,
849 .maxlen = sizeof(int),
850 .mode = 0644,
851 .proc_handler = proc_dointvec_minmax,
852 .extra1 = &zero,
853 .extra2 = &one,
856 .procname = "hung_task_check_count",
857 .data = &sysctl_hung_task_check_count,
858 .maxlen = sizeof(unsigned long),
859 .mode = 0644,
860 .proc_handler = proc_doulongvec_minmax,
863 .procname = "hung_task_timeout_secs",
864 .data = &sysctl_hung_task_timeout_secs,
865 .maxlen = sizeof(unsigned long),
866 .mode = 0644,
867 .proc_handler = proc_dohung_task_timeout_secs,
870 .procname = "hung_task_warnings",
871 .data = &sysctl_hung_task_warnings,
872 .maxlen = sizeof(unsigned long),
873 .mode = 0644,
874 .proc_handler = proc_doulongvec_minmax,
876 #endif
877 #ifdef CONFIG_COMPAT
879 .procname = "compat-log",
880 .data = &compat_log,
881 .maxlen = sizeof (int),
882 .mode = 0644,
883 .proc_handler = proc_dointvec,
885 #endif
886 #ifdef CONFIG_RT_MUTEXES
888 .procname = "max_lock_depth",
889 .data = &max_lock_depth,
890 .maxlen = sizeof(int),
891 .mode = 0644,
892 .proc_handler = proc_dointvec,
894 #endif
896 .procname = "poweroff_cmd",
897 .data = &poweroff_cmd,
898 .maxlen = POWEROFF_CMD_PATH_LEN,
899 .mode = 0644,
900 .proc_handler = proc_dostring,
902 #ifdef CONFIG_KEYS
904 .procname = "keys",
905 .mode = 0555,
906 .child = key_sysctls,
908 #endif
909 #ifdef CONFIG_RCU_TORTURE_TEST
911 .procname = "rcutorture_runnable",
912 .data = &rcutorture_runnable,
913 .maxlen = sizeof(int),
914 .mode = 0644,
915 .proc_handler = proc_dointvec,
917 #endif
918 #ifdef CONFIG_PERF_EVENTS
920 .procname = "perf_event_paranoid",
921 .data = &sysctl_perf_event_paranoid,
922 .maxlen = sizeof(sysctl_perf_event_paranoid),
923 .mode = 0644,
924 .proc_handler = proc_dointvec,
927 .procname = "perf_event_mlock_kb",
928 .data = &sysctl_perf_event_mlock,
929 .maxlen = sizeof(sysctl_perf_event_mlock),
930 .mode = 0644,
931 .proc_handler = proc_dointvec,
934 .procname = "perf_event_max_sample_rate",
935 .data = &sysctl_perf_event_sample_rate,
936 .maxlen = sizeof(sysctl_perf_event_sample_rate),
937 .mode = 0644,
938 .proc_handler = proc_dointvec,
940 #endif
941 #ifdef CONFIG_KMEMCHECK
943 .procname = "kmemcheck",
944 .data = &kmemcheck_enabled,
945 .maxlen = sizeof(int),
946 .mode = 0644,
947 .proc_handler = proc_dointvec,
949 #endif
950 #ifdef CONFIG_BLOCK
952 .procname = "blk_iopoll",
953 .data = &blk_iopoll_enabled,
954 .maxlen = sizeof(int),
955 .mode = 0644,
956 .proc_handler = proc_dointvec,
958 #endif
960 * NOTE: do not add new entries to this table unless you have read
961 * Documentation/sysctl/ctl_unnumbered.txt
966 static struct ctl_table vm_table[] = {
968 .procname = "overcommit_memory",
969 .data = &sysctl_overcommit_memory,
970 .maxlen = sizeof(sysctl_overcommit_memory),
971 .mode = 0644,
972 .proc_handler = proc_dointvec,
975 .procname = "panic_on_oom",
976 .data = &sysctl_panic_on_oom,
977 .maxlen = sizeof(sysctl_panic_on_oom),
978 .mode = 0644,
979 .proc_handler = proc_dointvec,
982 .procname = "oom_kill_allocating_task",
983 .data = &sysctl_oom_kill_allocating_task,
984 .maxlen = sizeof(sysctl_oom_kill_allocating_task),
985 .mode = 0644,
986 .proc_handler = proc_dointvec,
989 .procname = "oom_dump_tasks",
990 .data = &sysctl_oom_dump_tasks,
991 .maxlen = sizeof(sysctl_oom_dump_tasks),
992 .mode = 0644,
993 .proc_handler = proc_dointvec,
996 .procname = "overcommit_ratio",
997 .data = &sysctl_overcommit_ratio,
998 .maxlen = sizeof(sysctl_overcommit_ratio),
999 .mode = 0644,
1000 .proc_handler = proc_dointvec,
1003 .procname = "page-cluster",
1004 .data = &page_cluster,
1005 .maxlen = sizeof(int),
1006 .mode = 0644,
1007 .proc_handler = proc_dointvec,
1010 .procname = "dirty_background_ratio",
1011 .data = &dirty_background_ratio,
1012 .maxlen = sizeof(dirty_background_ratio),
1013 .mode = 0644,
1014 .proc_handler = dirty_background_ratio_handler,
1015 .extra1 = &zero,
1016 .extra2 = &one_hundred,
1019 .procname = "dirty_background_bytes",
1020 .data = &dirty_background_bytes,
1021 .maxlen = sizeof(dirty_background_bytes),
1022 .mode = 0644,
1023 .proc_handler = dirty_background_bytes_handler,
1024 .extra1 = &one_ul,
1027 .procname = "dirty_ratio",
1028 .data = &vm_dirty_ratio,
1029 .maxlen = sizeof(vm_dirty_ratio),
1030 .mode = 0644,
1031 .proc_handler = dirty_ratio_handler,
1032 .extra1 = &zero,
1033 .extra2 = &one_hundred,
1036 .procname = "dirty_bytes",
1037 .data = &vm_dirty_bytes,
1038 .maxlen = sizeof(vm_dirty_bytes),
1039 .mode = 0644,
1040 .proc_handler = dirty_bytes_handler,
1041 .extra1 = &dirty_bytes_min,
1044 .procname = "dirty_writeback_centisecs",
1045 .data = &dirty_writeback_interval,
1046 .maxlen = sizeof(dirty_writeback_interval),
1047 .mode = 0644,
1048 .proc_handler = dirty_writeback_centisecs_handler,
1051 .procname = "dirty_expire_centisecs",
1052 .data = &dirty_expire_interval,
1053 .maxlen = sizeof(dirty_expire_interval),
1054 .mode = 0644,
1055 .proc_handler = proc_dointvec,
1058 .procname = "nr_pdflush_threads",
1059 .data = &nr_pdflush_threads,
1060 .maxlen = sizeof nr_pdflush_threads,
1061 .mode = 0444 /* read-only*/,
1062 .proc_handler = proc_dointvec,
1065 .procname = "swappiness",
1066 .data = &vm_swappiness,
1067 .maxlen = sizeof(vm_swappiness),
1068 .mode = 0644,
1069 .proc_handler = proc_dointvec_minmax,
1070 .extra1 = &zero,
1071 .extra2 = &one_hundred,
1073 #ifdef CONFIG_HUGETLB_PAGE
1075 .procname = "nr_hugepages",
1076 .data = NULL,
1077 .maxlen = sizeof(unsigned long),
1078 .mode = 0644,
1079 .proc_handler = hugetlb_sysctl_handler,
1080 .extra1 = (void *)&hugetlb_zero,
1081 .extra2 = (void *)&hugetlb_infinity,
1083 #ifdef CONFIG_NUMA
1085 .procname = "nr_hugepages_mempolicy",
1086 .data = NULL,
1087 .maxlen = sizeof(unsigned long),
1088 .mode = 0644,
1089 .proc_handler = &hugetlb_mempolicy_sysctl_handler,
1090 .extra1 = (void *)&hugetlb_zero,
1091 .extra2 = (void *)&hugetlb_infinity,
1093 #endif
1095 .procname = "hugetlb_shm_group",
1096 .data = &sysctl_hugetlb_shm_group,
1097 .maxlen = sizeof(gid_t),
1098 .mode = 0644,
1099 .proc_handler = proc_dointvec,
1102 .procname = "hugepages_treat_as_movable",
1103 .data = &hugepages_treat_as_movable,
1104 .maxlen = sizeof(int),
1105 .mode = 0644,
1106 .proc_handler = hugetlb_treat_movable_handler,
1109 .procname = "nr_overcommit_hugepages",
1110 .data = NULL,
1111 .maxlen = sizeof(unsigned long),
1112 .mode = 0644,
1113 .proc_handler = hugetlb_overcommit_handler,
1114 .extra1 = (void *)&hugetlb_zero,
1115 .extra2 = (void *)&hugetlb_infinity,
1117 #endif
1119 .procname = "lowmem_reserve_ratio",
1120 .data = &sysctl_lowmem_reserve_ratio,
1121 .maxlen = sizeof(sysctl_lowmem_reserve_ratio),
1122 .mode = 0644,
1123 .proc_handler = lowmem_reserve_ratio_sysctl_handler,
1126 .procname = "drop_caches",
1127 .data = &sysctl_drop_caches,
1128 .maxlen = sizeof(int),
1129 .mode = 0644,
1130 .proc_handler = drop_caches_sysctl_handler,
1132 #ifdef CONFIG_COMPACTION
1134 .procname = "compact_memory",
1135 .data = &sysctl_compact_memory,
1136 .maxlen = sizeof(int),
1137 .mode = 0200,
1138 .proc_handler = sysctl_compaction_handler,
1141 .procname = "extfrag_threshold",
1142 .data = &sysctl_extfrag_threshold,
1143 .maxlen = sizeof(int),
1144 .mode = 0644,
1145 .proc_handler = sysctl_extfrag_handler,
1146 .extra1 = &min_extfrag_threshold,
1147 .extra2 = &max_extfrag_threshold,
1150 #endif /* CONFIG_COMPACTION */
1152 .procname = "min_free_kbytes",
1153 .data = &min_free_kbytes,
1154 .maxlen = sizeof(min_free_kbytes),
1155 .mode = 0644,
1156 .proc_handler = min_free_kbytes_sysctl_handler,
1157 .extra1 = &zero,
1160 .procname = "percpu_pagelist_fraction",
1161 .data = &percpu_pagelist_fraction,
1162 .maxlen = sizeof(percpu_pagelist_fraction),
1163 .mode = 0644,
1164 .proc_handler = percpu_pagelist_fraction_sysctl_handler,
1165 .extra1 = &min_percpu_pagelist_fract,
1167 #ifdef CONFIG_MMU
1169 .procname = "max_map_count",
1170 .data = &sysctl_max_map_count,
1171 .maxlen = sizeof(sysctl_max_map_count),
1172 .mode = 0644,
1173 .proc_handler = proc_dointvec_minmax,
1174 .extra1 = &zero,
1176 #else
1178 .procname = "nr_trim_pages",
1179 .data = &sysctl_nr_trim_pages,
1180 .maxlen = sizeof(sysctl_nr_trim_pages),
1181 .mode = 0644,
1182 .proc_handler = proc_dointvec_minmax,
1183 .extra1 = &zero,
1185 #endif
1187 .procname = "laptop_mode",
1188 .data = &laptop_mode,
1189 .maxlen = sizeof(laptop_mode),
1190 .mode = 0644,
1191 .proc_handler = proc_dointvec_jiffies,
1194 .procname = "block_dump",
1195 .data = &block_dump,
1196 .maxlen = sizeof(block_dump),
1197 .mode = 0644,
1198 .proc_handler = proc_dointvec,
1199 .extra1 = &zero,
1202 .procname = "vfs_cache_pressure",
1203 .data = &sysctl_vfs_cache_pressure,
1204 .maxlen = sizeof(sysctl_vfs_cache_pressure),
1205 .mode = 0644,
1206 .proc_handler = proc_dointvec,
1207 .extra1 = &zero,
1209 #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
1211 .procname = "legacy_va_layout",
1212 .data = &sysctl_legacy_va_layout,
1213 .maxlen = sizeof(sysctl_legacy_va_layout),
1214 .mode = 0644,
1215 .proc_handler = proc_dointvec,
1216 .extra1 = &zero,
1218 #endif
1219 #ifdef CONFIG_NUMA
1221 .procname = "zone_reclaim_mode",
1222 .data = &zone_reclaim_mode,
1223 .maxlen = sizeof(zone_reclaim_mode),
1224 .mode = 0644,
1225 .proc_handler = proc_dointvec,
1226 .extra1 = &zero,
1229 .procname = "min_unmapped_ratio",
1230 .data = &sysctl_min_unmapped_ratio,
1231 .maxlen = sizeof(sysctl_min_unmapped_ratio),
1232 .mode = 0644,
1233 .proc_handler = sysctl_min_unmapped_ratio_sysctl_handler,
1234 .extra1 = &zero,
1235 .extra2 = &one_hundred,
1238 .procname = "min_slab_ratio",
1239 .data = &sysctl_min_slab_ratio,
1240 .maxlen = sizeof(sysctl_min_slab_ratio),
1241 .mode = 0644,
1242 .proc_handler = sysctl_min_slab_ratio_sysctl_handler,
1243 .extra1 = &zero,
1244 .extra2 = &one_hundred,
1246 #endif
1247 #ifdef CONFIG_SMP
1249 .procname = "stat_interval",
1250 .data = &sysctl_stat_interval,
1251 .maxlen = sizeof(sysctl_stat_interval),
1252 .mode = 0644,
1253 .proc_handler = proc_dointvec_jiffies,
1255 #endif
1256 #ifdef CONFIG_MMU
1258 .procname = "mmap_min_addr",
1259 .data = &dac_mmap_min_addr,
1260 .maxlen = sizeof(unsigned long),
1261 .mode = 0644,
1262 .proc_handler = mmap_min_addr_handler,
1264 #endif
1265 #ifdef CONFIG_NUMA
1267 .procname = "numa_zonelist_order",
1268 .data = &numa_zonelist_order,
1269 .maxlen = NUMA_ZONELIST_ORDER_LEN,
1270 .mode = 0644,
1271 .proc_handler = numa_zonelist_order_handler,
1273 #endif
1274 #if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
1275 (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
1277 .procname = "vdso_enabled",
1278 .data = &vdso_enabled,
1279 .maxlen = sizeof(vdso_enabled),
1280 .mode = 0644,
1281 .proc_handler = proc_dointvec,
1282 .extra1 = &zero,
1284 #endif
1285 #ifdef CONFIG_HIGHMEM
1287 .procname = "highmem_is_dirtyable",
1288 .data = &vm_highmem_is_dirtyable,
1289 .maxlen = sizeof(vm_highmem_is_dirtyable),
1290 .mode = 0644,
1291 .proc_handler = proc_dointvec_minmax,
1292 .extra1 = &zero,
1293 .extra2 = &one,
1295 #endif
1297 .procname = "scan_unevictable_pages",
1298 .data = &scan_unevictable_pages,
1299 .maxlen = sizeof(scan_unevictable_pages),
1300 .mode = 0644,
1301 .proc_handler = scan_unevictable_handler,
1303 #ifdef CONFIG_MEMORY_FAILURE
1305 .procname = "memory_failure_early_kill",
1306 .data = &sysctl_memory_failure_early_kill,
1307 .maxlen = sizeof(sysctl_memory_failure_early_kill),
1308 .mode = 0644,
1309 .proc_handler = proc_dointvec_minmax,
1310 .extra1 = &zero,
1311 .extra2 = &one,
1314 .procname = "memory_failure_recovery",
1315 .data = &sysctl_memory_failure_recovery,
1316 .maxlen = sizeof(sysctl_memory_failure_recovery),
1317 .mode = 0644,
1318 .proc_handler = proc_dointvec_minmax,
1319 .extra1 = &zero,
1320 .extra2 = &one,
1322 #endif
1325 * NOTE: do not add new entries to this table unless you have read
1326 * Documentation/sysctl/ctl_unnumbered.txt
1331 #if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
1332 static struct ctl_table binfmt_misc_table[] = {
1335 #endif
1337 static struct ctl_table fs_table[] = {
1339 .procname = "inode-nr",
1340 .data = &inodes_stat,
1341 .maxlen = 2*sizeof(int),
1342 .mode = 0444,
1343 .proc_handler = proc_dointvec,
1346 .procname = "inode-state",
1347 .data = &inodes_stat,
1348 .maxlen = 7*sizeof(int),
1349 .mode = 0444,
1350 .proc_handler = proc_dointvec,
1353 .procname = "file-nr",
1354 .data = &files_stat,
1355 .maxlen = 3*sizeof(int),
1356 .mode = 0444,
1357 .proc_handler = proc_nr_files,
1360 .procname = "file-max",
1361 .data = &files_stat.max_files,
1362 .maxlen = sizeof(int),
1363 .mode = 0644,
1364 .proc_handler = proc_dointvec,
1367 .procname = "nr_open",
1368 .data = &sysctl_nr_open,
1369 .maxlen = sizeof(int),
1370 .mode = 0644,
1371 .proc_handler = proc_dointvec_minmax,
1372 .extra1 = &sysctl_nr_open_min,
1373 .extra2 = &sysctl_nr_open_max,
1376 .procname = "dentry-state",
1377 .data = &dentry_stat,
1378 .maxlen = 6*sizeof(int),
1379 .mode = 0444,
1380 .proc_handler = proc_dointvec,
1383 .procname = "overflowuid",
1384 .data = &fs_overflowuid,
1385 .maxlen = sizeof(int),
1386 .mode = 0644,
1387 .proc_handler = proc_dointvec_minmax,
1388 .extra1 = &minolduid,
1389 .extra2 = &maxolduid,
1392 .procname = "overflowgid",
1393 .data = &fs_overflowgid,
1394 .maxlen = sizeof(int),
1395 .mode = 0644,
1396 .proc_handler = proc_dointvec_minmax,
1397 .extra1 = &minolduid,
1398 .extra2 = &maxolduid,
1400 #ifdef CONFIG_FILE_LOCKING
1402 .procname = "leases-enable",
1403 .data = &leases_enable,
1404 .maxlen = sizeof(int),
1405 .mode = 0644,
1406 .proc_handler = proc_dointvec,
1408 #endif
1409 #ifdef CONFIG_DNOTIFY
1411 .procname = "dir-notify-enable",
1412 .data = &dir_notify_enable,
1413 .maxlen = sizeof(int),
1414 .mode = 0644,
1415 .proc_handler = proc_dointvec,
1417 #endif
1418 #ifdef CONFIG_MMU
1419 #ifdef CONFIG_FILE_LOCKING
1421 .procname = "lease-break-time",
1422 .data = &lease_break_time,
1423 .maxlen = sizeof(int),
1424 .mode = 0644,
1425 .proc_handler = proc_dointvec,
1427 #endif
1428 #ifdef CONFIG_AIO
1430 .procname = "aio-nr",
1431 .data = &aio_nr,
1432 .maxlen = sizeof(aio_nr),
1433 .mode = 0444,
1434 .proc_handler = proc_doulongvec_minmax,
1437 .procname = "aio-max-nr",
1438 .data = &aio_max_nr,
1439 .maxlen = sizeof(aio_max_nr),
1440 .mode = 0644,
1441 .proc_handler = proc_doulongvec_minmax,
1443 #endif /* CONFIG_AIO */
1444 #ifdef CONFIG_INOTIFY_USER
1446 .procname = "inotify",
1447 .mode = 0555,
1448 .child = inotify_table,
1450 #endif
1451 #ifdef CONFIG_EPOLL
1453 .procname = "epoll",
1454 .mode = 0555,
1455 .child = epoll_table,
1457 #endif
1458 #endif
1460 .procname = "suid_dumpable",
1461 .data = &suid_dumpable,
1462 .maxlen = sizeof(int),
1463 .mode = 0644,
1464 .proc_handler = proc_dointvec_minmax,
1465 .extra1 = &zero,
1466 .extra2 = &two,
1468 #if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
1470 .procname = "binfmt_misc",
1471 .mode = 0555,
1472 .child = binfmt_misc_table,
1474 #endif
1476 .procname = "pipe-max-size",
1477 .data = &pipe_max_size,
1478 .maxlen = sizeof(int),
1479 .mode = 0644,
1480 .proc_handler = &pipe_proc_fn,
1481 .extra1 = &pipe_min_size,
1484 * NOTE: do not add new entries to this table unless you have read
1485 * Documentation/sysctl/ctl_unnumbered.txt
1490 static struct ctl_table debug_table[] = {
1491 #if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || \
1492 defined(CONFIG_S390)
1494 .procname = "exception-trace",
1495 .data = &show_unhandled_signals,
1496 .maxlen = sizeof(int),
1497 .mode = 0644,
1498 .proc_handler = proc_dointvec
1500 #endif
1501 #if defined(CONFIG_OPTPROBES)
1503 .procname = "kprobes-optimization",
1504 .data = &sysctl_kprobes_optimization,
1505 .maxlen = sizeof(int),
1506 .mode = 0644,
1507 .proc_handler = proc_kprobes_optimization_handler,
1508 .extra1 = &zero,
1509 .extra2 = &one,
1511 #endif
1515 static struct ctl_table dev_table[] = {
1519 static DEFINE_SPINLOCK(sysctl_lock);
1521 /* called under sysctl_lock */
1522 static int use_table(struct ctl_table_header *p)
1524 if (unlikely(p->unregistering))
1525 return 0;
1526 p->used++;
1527 return 1;
1530 /* called under sysctl_lock */
1531 static void unuse_table(struct ctl_table_header *p)
1533 if (!--p->used)
1534 if (unlikely(p->unregistering))
1535 complete(p->unregistering);
1538 /* called under sysctl_lock, will reacquire if has to wait */
1539 static void start_unregistering(struct ctl_table_header *p)
1542 * if p->used is 0, nobody will ever touch that entry again;
1543 * we'll eliminate all paths to it before dropping sysctl_lock
1545 if (unlikely(p->used)) {
1546 struct completion wait;
1547 init_completion(&wait);
1548 p->unregistering = &wait;
1549 spin_unlock(&sysctl_lock);
1550 wait_for_completion(&wait);
1551 spin_lock(&sysctl_lock);
1552 } else {
1553 /* anything non-NULL; we'll never dereference it */
1554 p->unregistering = ERR_PTR(-EINVAL);
1557 * do not remove from the list until nobody holds it; walking the
1558 * list in do_sysctl() relies on that.
1560 list_del_init(&p->ctl_entry);
1563 void sysctl_head_get(struct ctl_table_header *head)
1565 spin_lock(&sysctl_lock);
1566 head->count++;
1567 spin_unlock(&sysctl_lock);
1570 void sysctl_head_put(struct ctl_table_header *head)
1572 spin_lock(&sysctl_lock);
1573 if (!--head->count)
1574 kfree(head);
1575 spin_unlock(&sysctl_lock);
1578 struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *head)
1580 if (!head)
1581 BUG();
1582 spin_lock(&sysctl_lock);
1583 if (!use_table(head))
1584 head = ERR_PTR(-ENOENT);
1585 spin_unlock(&sysctl_lock);
1586 return head;
1589 void sysctl_head_finish(struct ctl_table_header *head)
1591 if (!head)
1592 return;
1593 spin_lock(&sysctl_lock);
1594 unuse_table(head);
1595 spin_unlock(&sysctl_lock);
1598 static struct ctl_table_set *
1599 lookup_header_set(struct ctl_table_root *root, struct nsproxy *namespaces)
1601 struct ctl_table_set *set = &root->default_set;
1602 if (root->lookup)
1603 set = root->lookup(root, namespaces);
1604 return set;
1607 static struct list_head *
1608 lookup_header_list(struct ctl_table_root *root, struct nsproxy *namespaces)
1610 struct ctl_table_set *set = lookup_header_set(root, namespaces);
1611 return &set->list;
1614 struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
1615 struct ctl_table_header *prev)
1617 struct ctl_table_root *root;
1618 struct list_head *header_list;
1619 struct ctl_table_header *head;
1620 struct list_head *tmp;
1622 spin_lock(&sysctl_lock);
1623 if (prev) {
1624 head = prev;
1625 tmp = &prev->ctl_entry;
1626 unuse_table(prev);
1627 goto next;
1629 tmp = &root_table_header.ctl_entry;
1630 for (;;) {
1631 head = list_entry(tmp, struct ctl_table_header, ctl_entry);
1633 if (!use_table(head))
1634 goto next;
1635 spin_unlock(&sysctl_lock);
1636 return head;
1637 next:
1638 root = head->root;
1639 tmp = tmp->next;
1640 header_list = lookup_header_list(root, namespaces);
1641 if (tmp != header_list)
1642 continue;
1644 do {
1645 root = list_entry(root->root_list.next,
1646 struct ctl_table_root, root_list);
1647 if (root == &sysctl_table_root)
1648 goto out;
1649 header_list = lookup_header_list(root, namespaces);
1650 } while (list_empty(header_list));
1651 tmp = header_list->next;
1653 out:
1654 spin_unlock(&sysctl_lock);
1655 return NULL;
1658 struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev)
1660 return __sysctl_head_next(current->nsproxy, prev);
1663 void register_sysctl_root(struct ctl_table_root *root)
1665 spin_lock(&sysctl_lock);
1666 list_add_tail(&root->root_list, &sysctl_table_root.root_list);
1667 spin_unlock(&sysctl_lock);
1671 * sysctl_perm does NOT grant the superuser all rights automatically, because
1672 * some sysctl variables are readonly even to root.
1675 static int test_perm(int mode, int op)
1677 if (!current_euid())
1678 mode >>= 6;
1679 else if (in_egroup_p(0))
1680 mode >>= 3;
1681 if ((op & ~mode & (MAY_READ|MAY_WRITE|MAY_EXEC)) == 0)
1682 return 0;
1683 return -EACCES;
1686 int sysctl_perm(struct ctl_table_root *root, struct ctl_table *table, int op)
1688 int error;
1689 int mode;
1691 error = security_sysctl(table, op & (MAY_READ | MAY_WRITE | MAY_EXEC));
1692 if (error)
1693 return error;
1695 if (root->permissions)
1696 mode = root->permissions(root, current->nsproxy, table);
1697 else
1698 mode = table->mode;
1700 return test_perm(mode, op);
1703 static void sysctl_set_parent(struct ctl_table *parent, struct ctl_table *table)
1705 for (; table->procname; table++) {
1706 table->parent = parent;
1707 if (table->child)
1708 sysctl_set_parent(table, table->child);
1712 static __init int sysctl_init(void)
1714 sysctl_set_parent(NULL, root_table);
1715 #ifdef CONFIG_SYSCTL_SYSCALL_CHECK
1717 int err;
1718 err = sysctl_check_table(current->nsproxy, root_table);
1720 #endif
1721 return 0;
1724 core_initcall(sysctl_init);
1726 static struct ctl_table *is_branch_in(struct ctl_table *branch,
1727 struct ctl_table *table)
1729 struct ctl_table *p;
1730 const char *s = branch->procname;
1732 /* branch should have named subdirectory as its first element */
1733 if (!s || !branch->child)
1734 return NULL;
1736 /* ... and nothing else */
1737 if (branch[1].procname)
1738 return NULL;
1740 /* table should contain subdirectory with the same name */
1741 for (p = table; p->procname; p++) {
1742 if (!p->child)
1743 continue;
1744 if (p->procname && strcmp(p->procname, s) == 0)
1745 return p;
1747 return NULL;
1750 /* see if attaching q to p would be an improvement */
1751 static void try_attach(struct ctl_table_header *p, struct ctl_table_header *q)
1753 struct ctl_table *to = p->ctl_table, *by = q->ctl_table;
1754 struct ctl_table *next;
1755 int is_better = 0;
1756 int not_in_parent = !p->attached_by;
1758 while ((next = is_branch_in(by, to)) != NULL) {
1759 if (by == q->attached_by)
1760 is_better = 1;
1761 if (to == p->attached_by)
1762 not_in_parent = 1;
1763 by = by->child;
1764 to = next->child;
1767 if (is_better && not_in_parent) {
1768 q->attached_by = by;
1769 q->attached_to = to;
1770 q->parent = p;
1775 * __register_sysctl_paths - register a sysctl hierarchy
1776 * @root: List of sysctl headers to register on
1777 * @namespaces: Data to compute which lists of sysctl entries are visible
1778 * @path: The path to the directory the sysctl table is in.
1779 * @table: the top-level table structure
1781 * Register a sysctl table hierarchy. @table should be a filled in ctl_table
1782 * array. A completely 0 filled entry terminates the table.
1784 * The members of the &struct ctl_table structure are used as follows:
1786 * procname - the name of the sysctl file under /proc/sys. Set to %NULL to not
1787 * enter a sysctl file
1789 * data - a pointer to data for use by proc_handler
1791 * maxlen - the maximum size in bytes of the data
1793 * mode - the file permissions for the /proc/sys file, and for sysctl(2)
1795 * child - a pointer to the child sysctl table if this entry is a directory, or
1796 * %NULL.
1798 * proc_handler - the text handler routine (described below)
1800 * de - for internal use by the sysctl routines
1802 * extra1, extra2 - extra pointers usable by the proc handler routines
1804 * Leaf nodes in the sysctl tree will be represented by a single file
1805 * under /proc; non-leaf nodes will be represented by directories.
1807 * sysctl(2) can automatically manage read and write requests through
1808 * the sysctl table. The data and maxlen fields of the ctl_table
1809 * struct enable minimal validation of the values being written to be
1810 * performed, and the mode field allows minimal authentication.
1812 * There must be a proc_handler routine for any terminal nodes
1813 * mirrored under /proc/sys (non-terminals are handled by a built-in
1814 * directory handler). Several default handlers are available to
1815 * cover common cases -
1817 * proc_dostring(), proc_dointvec(), proc_dointvec_jiffies(),
1818 * proc_dointvec_userhz_jiffies(), proc_dointvec_minmax(),
1819 * proc_doulongvec_ms_jiffies_minmax(), proc_doulongvec_minmax()
1821 * It is the handler's job to read the input buffer from user memory
1822 * and process it. The handler should return 0 on success.
1824 * This routine returns %NULL on a failure to register, and a pointer
1825 * to the table header on success.
1827 struct ctl_table_header *__register_sysctl_paths(
1828 struct ctl_table_root *root,
1829 struct nsproxy *namespaces,
1830 const struct ctl_path *path, struct ctl_table *table)
1832 struct ctl_table_header *header;
1833 struct ctl_table *new, **prevp;
1834 unsigned int n, npath;
1835 struct ctl_table_set *set;
1837 /* Count the path components */
1838 for (npath = 0; path[npath].procname; ++npath)
1842 * For each path component, allocate a 2-element ctl_table array.
1843 * The first array element will be filled with the sysctl entry
1844 * for this, the second will be the sentinel (procname == 0).
1846 * We allocate everything in one go so that we don't have to
1847 * worry about freeing additional memory in unregister_sysctl_table.
1849 header = kzalloc(sizeof(struct ctl_table_header) +
1850 (2 * npath * sizeof(struct ctl_table)), GFP_KERNEL);
1851 if (!header)
1852 return NULL;
1854 new = (struct ctl_table *) (header + 1);
1856 /* Now connect the dots */
1857 prevp = &header->ctl_table;
1858 for (n = 0; n < npath; ++n, ++path) {
1859 /* Copy the procname */
1860 new->procname = path->procname;
1861 new->mode = 0555;
1863 *prevp = new;
1864 prevp = &new->child;
1866 new += 2;
1868 *prevp = table;
1869 header->ctl_table_arg = table;
1871 INIT_LIST_HEAD(&header->ctl_entry);
1872 header->used = 0;
1873 header->unregistering = NULL;
1874 header->root = root;
1875 sysctl_set_parent(NULL, header->ctl_table);
1876 header->count = 1;
1877 #ifdef CONFIG_SYSCTL_SYSCALL_CHECK
1878 if (sysctl_check_table(namespaces, header->ctl_table)) {
1879 kfree(header);
1880 return NULL;
1882 #endif
1883 spin_lock(&sysctl_lock);
1884 header->set = lookup_header_set(root, namespaces);
1885 header->attached_by = header->ctl_table;
1886 header->attached_to = root_table;
1887 header->parent = &root_table_header;
1888 for (set = header->set; set; set = set->parent) {
1889 struct ctl_table_header *p;
1890 list_for_each_entry(p, &set->list, ctl_entry) {
1891 if (p->unregistering)
1892 continue;
1893 try_attach(p, header);
1896 header->parent->count++;
1897 list_add_tail(&header->ctl_entry, &header->set->list);
1898 spin_unlock(&sysctl_lock);
1900 return header;
1904 * register_sysctl_table_path - register a sysctl table hierarchy
1905 * @path: The path to the directory the sysctl table is in.
1906 * @table: the top-level table structure
1908 * Register a sysctl table hierarchy. @table should be a filled in ctl_table
1909 * array. A completely 0 filled entry terminates the table.
1911 * See __register_sysctl_paths for more details.
1913 struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
1914 struct ctl_table *table)
1916 return __register_sysctl_paths(&sysctl_table_root, current->nsproxy,
1917 path, table);
1921 * register_sysctl_table - register a sysctl table hierarchy
1922 * @table: the top-level table structure
1924 * Register a sysctl table hierarchy. @table should be a filled in ctl_table
1925 * array. A completely 0 filled entry terminates the table.
1927 * See register_sysctl_paths for more details.
1929 struct ctl_table_header *register_sysctl_table(struct ctl_table *table)
1931 static const struct ctl_path null_path[] = { {} };
1933 return register_sysctl_paths(null_path, table);
1937 * unregister_sysctl_table - unregister a sysctl table hierarchy
1938 * @header: the header returned from register_sysctl_table
1940 * Unregisters the sysctl table and all children. proc entries may not
1941 * actually be removed until they are no longer used by anyone.
1943 void unregister_sysctl_table(struct ctl_table_header * header)
1945 might_sleep();
1947 if (header == NULL)
1948 return;
1950 spin_lock(&sysctl_lock);
1951 start_unregistering(header);
1952 if (!--header->parent->count) {
1953 WARN_ON(1);
1954 kfree(header->parent);
1956 if (!--header->count)
1957 kfree(header);
1958 spin_unlock(&sysctl_lock);
1961 int sysctl_is_seen(struct ctl_table_header *p)
1963 struct ctl_table_set *set = p->set;
1964 int res;
1965 spin_lock(&sysctl_lock);
1966 if (p->unregistering)
1967 res = 0;
1968 else if (!set->is_seen)
1969 res = 1;
1970 else
1971 res = set->is_seen(set);
1972 spin_unlock(&sysctl_lock);
1973 return res;
1976 void setup_sysctl_set(struct ctl_table_set *p,
1977 struct ctl_table_set *parent,
1978 int (*is_seen)(struct ctl_table_set *))
1980 INIT_LIST_HEAD(&p->list);
1981 p->parent = parent ? parent : &sysctl_table_root.default_set;
1982 p->is_seen = is_seen;
1985 #else /* !CONFIG_SYSCTL */
1986 struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
1988 return NULL;
1991 struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
1992 struct ctl_table *table)
1994 return NULL;
1997 void unregister_sysctl_table(struct ctl_table_header * table)
2001 void setup_sysctl_set(struct ctl_table_set *p,
2002 struct ctl_table_set *parent,
2003 int (*is_seen)(struct ctl_table_set *))
2007 void sysctl_head_put(struct ctl_table_header *head)
2011 #endif /* CONFIG_SYSCTL */
2014 * /proc/sys support
2017 #ifdef CONFIG_PROC_SYSCTL
2019 static int _proc_do_string(void* data, int maxlen, int write,
2020 void __user *buffer,
2021 size_t *lenp, loff_t *ppos)
2023 size_t len;
2024 char __user *p;
2025 char c;
2027 if (!data || !maxlen || !*lenp) {
2028 *lenp = 0;
2029 return 0;
2032 if (write) {
2033 len = 0;
2034 p = buffer;
2035 while (len < *lenp) {
2036 if (get_user(c, p++))
2037 return -EFAULT;
2038 if (c == 0 || c == '\n')
2039 break;
2040 len++;
2042 if (len >= maxlen)
2043 len = maxlen-1;
2044 if(copy_from_user(data, buffer, len))
2045 return -EFAULT;
2046 ((char *) data)[len] = 0;
2047 *ppos += *lenp;
2048 } else {
2049 len = strlen(data);
2050 if (len > maxlen)
2051 len = maxlen;
2053 if (*ppos > len) {
2054 *lenp = 0;
2055 return 0;
2058 data += *ppos;
2059 len -= *ppos;
2061 if (len > *lenp)
2062 len = *lenp;
2063 if (len)
2064 if(copy_to_user(buffer, data, len))
2065 return -EFAULT;
2066 if (len < *lenp) {
2067 if(put_user('\n', ((char __user *) buffer) + len))
2068 return -EFAULT;
2069 len++;
2071 *lenp = len;
2072 *ppos += len;
2074 return 0;
2078 * proc_dostring - read a string sysctl
2079 * @table: the sysctl table
2080 * @write: %TRUE if this is a write to the sysctl file
2081 * @buffer: the user buffer
2082 * @lenp: the size of the user buffer
2083 * @ppos: file position
2085 * Reads/writes a string from/to the user buffer. If the kernel
2086 * buffer provided is not large enough to hold the string, the
2087 * string is truncated. The copied string is %NULL-terminated.
2088 * If the string is being read by the user process, it is copied
2089 * and a newline '\n' is added. It is truncated if the buffer is
2090 * not large enough.
2092 * Returns 0 on success.
2094 int proc_dostring(struct ctl_table *table, int write,
2095 void __user *buffer, size_t *lenp, loff_t *ppos)
2097 return _proc_do_string(table->data, table->maxlen, write,
2098 buffer, lenp, ppos);
2101 static size_t proc_skip_spaces(char **buf)
2103 size_t ret;
2104 char *tmp = skip_spaces(*buf);
2105 ret = tmp - *buf;
2106 *buf = tmp;
2107 return ret;
2110 static void proc_skip_char(char **buf, size_t *size, const char v)
2112 while (*size) {
2113 if (**buf != v)
2114 break;
2115 (*size)--;
2116 (*buf)++;
2120 #define TMPBUFLEN 22
2122 * proc_get_long - reads an ASCII formatted integer from a user buffer
2124 * @buf: a kernel buffer
2125 * @size: size of the kernel buffer
2126 * @val: this is where the number will be stored
2127 * @neg: set to %TRUE if number is negative
2128 * @perm_tr: a vector which contains the allowed trailers
2129 * @perm_tr_len: size of the perm_tr vector
2130 * @tr: pointer to store the trailer character
2132 * In case of success %0 is returned and @buf and @size are updated with
2133 * the amount of bytes read. If @tr is non-NULL and a trailing
2134 * character exists (size is non-zero after returning from this
2135 * function), @tr is updated with the trailing character.
2137 static int proc_get_long(char **buf, size_t *size,
2138 unsigned long *val, bool *neg,
2139 const char *perm_tr, unsigned perm_tr_len, char *tr)
2141 int len;
2142 char *p, tmp[TMPBUFLEN];
2144 if (!*size)
2145 return -EINVAL;
2147 len = *size;
2148 if (len > TMPBUFLEN - 1)
2149 len = TMPBUFLEN - 1;
2151 memcpy(tmp, *buf, len);
2153 tmp[len] = 0;
2154 p = tmp;
2155 if (*p == '-' && *size > 1) {
2156 *neg = true;
2157 p++;
2158 } else
2159 *neg = false;
2160 if (!isdigit(*p))
2161 return -EINVAL;
2163 *val = simple_strtoul(p, &p, 0);
2165 len = p - tmp;
2167 /* We don't know if the next char is whitespace thus we may accept
2168 * invalid integers (e.g. 1234...a) or two integers instead of one
2169 * (e.g. 123...1). So lets not allow such large numbers. */
2170 if (len == TMPBUFLEN - 1)
2171 return -EINVAL;
2173 if (len < *size && perm_tr_len && !memchr(perm_tr, *p, perm_tr_len))
2174 return -EINVAL;
2176 if (tr && (len < *size))
2177 *tr = *p;
2179 *buf += len;
2180 *size -= len;
2182 return 0;
2186 * proc_put_long - converts an integer to a decimal ASCII formatted string
2188 * @buf: the user buffer
2189 * @size: the size of the user buffer
2190 * @val: the integer to be converted
2191 * @neg: sign of the number, %TRUE for negative
2193 * In case of success %0 is returned and @buf and @size are updated with
2194 * the amount of bytes written.
2196 static int proc_put_long(void __user **buf, size_t *size, unsigned long val,
2197 bool neg)
2199 int len;
2200 char tmp[TMPBUFLEN], *p = tmp;
2202 sprintf(p, "%s%lu", neg ? "-" : "", val);
2203 len = strlen(tmp);
2204 if (len > *size)
2205 len = *size;
2206 if (copy_to_user(*buf, tmp, len))
2207 return -EFAULT;
2208 *size -= len;
2209 *buf += len;
2210 return 0;
2212 #undef TMPBUFLEN
2214 static int proc_put_char(void __user **buf, size_t *size, char c)
2216 if (*size) {
2217 char __user **buffer = (char __user **)buf;
2218 if (put_user(c, *buffer))
2219 return -EFAULT;
2220 (*size)--, (*buffer)++;
2221 *buf = *buffer;
2223 return 0;
2226 static int do_proc_dointvec_conv(bool *negp, unsigned long *lvalp,
2227 int *valp,
2228 int write, void *data)
2230 if (write) {
2231 *valp = *negp ? -*lvalp : *lvalp;
2232 } else {
2233 int val = *valp;
2234 if (val < 0) {
2235 *negp = true;
2236 *lvalp = (unsigned long)-val;
2237 } else {
2238 *negp = false;
2239 *lvalp = (unsigned long)val;
2242 return 0;
2245 static const char proc_wspace_sep[] = { ' ', '\t', '\n' };
2247 static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
2248 int write, void __user *buffer,
2249 size_t *lenp, loff_t *ppos,
2250 int (*conv)(bool *negp, unsigned long *lvalp, int *valp,
2251 int write, void *data),
2252 void *data)
2254 int *i, vleft, first = 1, err = 0;
2255 unsigned long page = 0;
2256 size_t left;
2257 char *kbuf;
2259 if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) {
2260 *lenp = 0;
2261 return 0;
2264 i = (int *) tbl_data;
2265 vleft = table->maxlen / sizeof(*i);
2266 left = *lenp;
2268 if (!conv)
2269 conv = do_proc_dointvec_conv;
2271 if (write) {
2272 if (left > PAGE_SIZE - 1)
2273 left = PAGE_SIZE - 1;
2274 page = __get_free_page(GFP_TEMPORARY);
2275 kbuf = (char *) page;
2276 if (!kbuf)
2277 return -ENOMEM;
2278 if (copy_from_user(kbuf, buffer, left)) {
2279 err = -EFAULT;
2280 goto free;
2282 kbuf[left] = 0;
2285 for (; left && vleft--; i++, first=0) {
2286 unsigned long lval;
2287 bool neg;
2289 if (write) {
2290 left -= proc_skip_spaces(&kbuf);
2292 if (!left)
2293 break;
2294 err = proc_get_long(&kbuf, &left, &lval, &neg,
2295 proc_wspace_sep,
2296 sizeof(proc_wspace_sep), NULL);
2297 if (err)
2298 break;
2299 if (conv(&neg, &lval, i, 1, data)) {
2300 err = -EINVAL;
2301 break;
2303 } else {
2304 if (conv(&neg, &lval, i, 0, data)) {
2305 err = -EINVAL;
2306 break;
2308 if (!first)
2309 err = proc_put_char(&buffer, &left, '\t');
2310 if (err)
2311 break;
2312 err = proc_put_long(&buffer, &left, lval, neg);
2313 if (err)
2314 break;
2318 if (!write && !first && left && !err)
2319 err = proc_put_char(&buffer, &left, '\n');
2320 if (write && !err && left)
2321 left -= proc_skip_spaces(&kbuf);
2322 free:
2323 if (write) {
2324 free_page(page);
2325 if (first)
2326 return err ? : -EINVAL;
2328 *lenp -= left;
2329 *ppos += *lenp;
2330 return err;
2333 static int do_proc_dointvec(struct ctl_table *table, int write,
2334 void __user *buffer, size_t *lenp, loff_t *ppos,
2335 int (*conv)(bool *negp, unsigned long *lvalp, int *valp,
2336 int write, void *data),
2337 void *data)
2339 return __do_proc_dointvec(table->data, table, write,
2340 buffer, lenp, ppos, conv, data);
2344 * proc_dointvec - read a vector of integers
2345 * @table: the sysctl table
2346 * @write: %TRUE if this is a write to the sysctl file
2347 * @buffer: the user buffer
2348 * @lenp: the size of the user buffer
2349 * @ppos: file position
2351 * Reads/writes up to table->maxlen/sizeof(unsigned int) integer
2352 * values from/to the user buffer, treated as an ASCII string.
2354 * Returns 0 on success.
2356 int proc_dointvec(struct ctl_table *table, int write,
2357 void __user *buffer, size_t *lenp, loff_t *ppos)
2359 return do_proc_dointvec(table,write,buffer,lenp,ppos,
2360 NULL,NULL);
2364 * Taint values can only be increased
2365 * This means we can safely use a temporary.
2367 static int proc_taint(struct ctl_table *table, int write,
2368 void __user *buffer, size_t *lenp, loff_t *ppos)
2370 struct ctl_table t;
2371 unsigned long tmptaint = get_taint();
2372 int err;
2374 if (write && !capable(CAP_SYS_ADMIN))
2375 return -EPERM;
2377 t = *table;
2378 t.data = &tmptaint;
2379 err = proc_doulongvec_minmax(&t, write, buffer, lenp, ppos);
2380 if (err < 0)
2381 return err;
2383 if (write) {
2385 * Poor man's atomic or. Not worth adding a primitive
2386 * to everyone's atomic.h for this
2388 int i;
2389 for (i = 0; i < BITS_PER_LONG && tmptaint >> i; i++) {
2390 if ((tmptaint >> i) & 1)
2391 add_taint(i);
2395 return err;
2398 struct do_proc_dointvec_minmax_conv_param {
2399 int *min;
2400 int *max;
2403 static int do_proc_dointvec_minmax_conv(bool *negp, unsigned long *lvalp,
2404 int *valp,
2405 int write, void *data)
2407 struct do_proc_dointvec_minmax_conv_param *param = data;
2408 if (write) {
2409 int val = *negp ? -*lvalp : *lvalp;
2410 if ((param->min && *param->min > val) ||
2411 (param->max && *param->max < val))
2412 return -EINVAL;
2413 *valp = val;
2414 } else {
2415 int val = *valp;
2416 if (val < 0) {
2417 *negp = true;
2418 *lvalp = (unsigned long)-val;
2419 } else {
2420 *negp = false;
2421 *lvalp = (unsigned long)val;
2424 return 0;
2428 * proc_dointvec_minmax - read a vector of integers with min/max values
2429 * @table: the sysctl table
2430 * @write: %TRUE if this is a write to the sysctl file
2431 * @buffer: the user buffer
2432 * @lenp: the size of the user buffer
2433 * @ppos: file position
2435 * Reads/writes up to table->maxlen/sizeof(unsigned int) integer
2436 * values from/to the user buffer, treated as an ASCII string.
2438 * This routine will ensure the values are within the range specified by
2439 * table->extra1 (min) and table->extra2 (max).
2441 * Returns 0 on success.
2443 int proc_dointvec_minmax(struct ctl_table *table, int write,
2444 void __user *buffer, size_t *lenp, loff_t *ppos)
2446 struct do_proc_dointvec_minmax_conv_param param = {
2447 .min = (int *) table->extra1,
2448 .max = (int *) table->extra2,
2450 return do_proc_dointvec(table, write, buffer, lenp, ppos,
2451 do_proc_dointvec_minmax_conv, &param);
2454 static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int write,
2455 void __user *buffer,
2456 size_t *lenp, loff_t *ppos,
2457 unsigned long convmul,
2458 unsigned long convdiv)
2460 unsigned long *i, *min, *max;
2461 int vleft, first = 1, err = 0;
2462 unsigned long page = 0;
2463 size_t left;
2464 char *kbuf;
2466 if (!data || !table->maxlen || !*lenp || (*ppos && !write)) {
2467 *lenp = 0;
2468 return 0;
2471 i = (unsigned long *) data;
2472 min = (unsigned long *) table->extra1;
2473 max = (unsigned long *) table->extra2;
2474 vleft = table->maxlen / sizeof(unsigned long);
2475 left = *lenp;
2477 if (write) {
2478 if (left > PAGE_SIZE - 1)
2479 left = PAGE_SIZE - 1;
2480 page = __get_free_page(GFP_TEMPORARY);
2481 kbuf = (char *) page;
2482 if (!kbuf)
2483 return -ENOMEM;
2484 if (copy_from_user(kbuf, buffer, left)) {
2485 err = -EFAULT;
2486 goto free;
2488 kbuf[left] = 0;
2491 for (; left && vleft--; i++, min++, max++, first=0) {
2492 unsigned long val;
2494 if (write) {
2495 bool neg;
2497 left -= proc_skip_spaces(&kbuf);
2499 err = proc_get_long(&kbuf, &left, &val, &neg,
2500 proc_wspace_sep,
2501 sizeof(proc_wspace_sep), NULL);
2502 if (err)
2503 break;
2504 if (neg)
2505 continue;
2506 if ((min && val < *min) || (max && val > *max))
2507 continue;
2508 *i = val;
2509 } else {
2510 val = convdiv * (*i) / convmul;
2511 if (!first)
2512 err = proc_put_char(&buffer, &left, '\t');
2513 err = proc_put_long(&buffer, &left, val, false);
2514 if (err)
2515 break;
2519 if (!write && !first && left && !err)
2520 err = proc_put_char(&buffer, &left, '\n');
2521 if (write && !err)
2522 left -= proc_skip_spaces(&kbuf);
2523 free:
2524 if (write) {
2525 free_page(page);
2526 if (first)
2527 return err ? : -EINVAL;
2529 *lenp -= left;
2530 *ppos += *lenp;
2531 return err;
2534 static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
2535 void __user *buffer,
2536 size_t *lenp, loff_t *ppos,
2537 unsigned long convmul,
2538 unsigned long convdiv)
2540 return __do_proc_doulongvec_minmax(table->data, table, write,
2541 buffer, lenp, ppos, convmul, convdiv);
2545 * proc_doulongvec_minmax - read a vector of long integers with min/max values
2546 * @table: the sysctl table
2547 * @write: %TRUE if this is a write to the sysctl file
2548 * @buffer: the user buffer
2549 * @lenp: the size of the user buffer
2550 * @ppos: file position
2552 * Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
2553 * values from/to the user buffer, treated as an ASCII string.
2555 * This routine will ensure the values are within the range specified by
2556 * table->extra1 (min) and table->extra2 (max).
2558 * Returns 0 on success.
2560 int proc_doulongvec_minmax(struct ctl_table *table, int write,
2561 void __user *buffer, size_t *lenp, loff_t *ppos)
2563 return do_proc_doulongvec_minmax(table, write, buffer, lenp, ppos, 1l, 1l);
2567 * proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
2568 * @table: the sysctl table
2569 * @write: %TRUE if this is a write to the sysctl file
2570 * @buffer: the user buffer
2571 * @lenp: the size of the user buffer
2572 * @ppos: file position
2574 * Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
2575 * values from/to the user buffer, treated as an ASCII string. The values
2576 * are treated as milliseconds, and converted to jiffies when they are stored.
2578 * This routine will ensure the values are within the range specified by
2579 * table->extra1 (min) and table->extra2 (max).
2581 * Returns 0 on success.
2583 int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
2584 void __user *buffer,
2585 size_t *lenp, loff_t *ppos)
2587 return do_proc_doulongvec_minmax(table, write, buffer,
2588 lenp, ppos, HZ, 1000l);
2592 static int do_proc_dointvec_jiffies_conv(bool *negp, unsigned long *lvalp,
2593 int *valp,
2594 int write, void *data)
2596 if (write) {
2597 if (*lvalp > LONG_MAX / HZ)
2598 return 1;
2599 *valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ);
2600 } else {
2601 int val = *valp;
2602 unsigned long lval;
2603 if (val < 0) {
2604 *negp = true;
2605 lval = (unsigned long)-val;
2606 } else {
2607 *negp = false;
2608 lval = (unsigned long)val;
2610 *lvalp = lval / HZ;
2612 return 0;
2615 static int do_proc_dointvec_userhz_jiffies_conv(bool *negp, unsigned long *lvalp,
2616 int *valp,
2617 int write, void *data)
2619 if (write) {
2620 if (USER_HZ < HZ && *lvalp > (LONG_MAX / HZ) * USER_HZ)
2621 return 1;
2622 *valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp);
2623 } else {
2624 int val = *valp;
2625 unsigned long lval;
2626 if (val < 0) {
2627 *negp = true;
2628 lval = (unsigned long)-val;
2629 } else {
2630 *negp = false;
2631 lval = (unsigned long)val;
2633 *lvalp = jiffies_to_clock_t(lval);
2635 return 0;
2638 static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp,
2639 int *valp,
2640 int write, void *data)
2642 if (write) {
2643 *valp = msecs_to_jiffies(*negp ? -*lvalp : *lvalp);
2644 } else {
2645 int val = *valp;
2646 unsigned long lval;
2647 if (val < 0) {
2648 *negp = true;
2649 lval = (unsigned long)-val;
2650 } else {
2651 *negp = false;
2652 lval = (unsigned long)val;
2654 *lvalp = jiffies_to_msecs(lval);
2656 return 0;
2660 * proc_dointvec_jiffies - read a vector of integers as seconds
2661 * @table: the sysctl table
2662 * @write: %TRUE if this is a write to the sysctl file
2663 * @buffer: the user buffer
2664 * @lenp: the size of the user buffer
2665 * @ppos: file position
2667 * Reads/writes up to table->maxlen/sizeof(unsigned int) integer
2668 * values from/to the user buffer, treated as an ASCII string.
2669 * The values read are assumed to be in seconds, and are converted into
2670 * jiffies.
2672 * Returns 0 on success.
2674 int proc_dointvec_jiffies(struct ctl_table *table, int write,
2675 void __user *buffer, size_t *lenp, loff_t *ppos)
2677 return do_proc_dointvec(table,write,buffer,lenp,ppos,
2678 do_proc_dointvec_jiffies_conv,NULL);
2682 * proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
2683 * @table: the sysctl table
2684 * @write: %TRUE if this is a write to the sysctl file
2685 * @buffer: the user buffer
2686 * @lenp: the size of the user buffer
2687 * @ppos: pointer to the file position
2689 * Reads/writes up to table->maxlen/sizeof(unsigned int) integer
2690 * values from/to the user buffer, treated as an ASCII string.
2691 * The values read are assumed to be in 1/USER_HZ seconds, and
2692 * are converted into jiffies.
2694 * Returns 0 on success.
2696 int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
2697 void __user *buffer, size_t *lenp, loff_t *ppos)
2699 return do_proc_dointvec(table,write,buffer,lenp,ppos,
2700 do_proc_dointvec_userhz_jiffies_conv,NULL);
2704 * proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
2705 * @table: the sysctl table
2706 * @write: %TRUE if this is a write to the sysctl file
2707 * @buffer: the user buffer
2708 * @lenp: the size of the user buffer
2709 * @ppos: file position
2710 * @ppos: the current position in the file
2712 * Reads/writes up to table->maxlen/sizeof(unsigned int) integer
2713 * values from/to the user buffer, treated as an ASCII string.
2714 * The values read are assumed to be in 1/1000 seconds, and
2715 * are converted into jiffies.
2717 * Returns 0 on success.
2719 int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
2720 void __user *buffer, size_t *lenp, loff_t *ppos)
2722 return do_proc_dointvec(table, write, buffer, lenp, ppos,
2723 do_proc_dointvec_ms_jiffies_conv, NULL);
2726 static int proc_do_cad_pid(struct ctl_table *table, int write,
2727 void __user *buffer, size_t *lenp, loff_t *ppos)
2729 struct pid *new_pid;
2730 pid_t tmp;
2731 int r;
2733 tmp = pid_vnr(cad_pid);
2735 r = __do_proc_dointvec(&tmp, table, write, buffer,
2736 lenp, ppos, NULL, NULL);
2737 if (r || !write)
2738 return r;
2740 new_pid = find_get_pid(tmp);
2741 if (!new_pid)
2742 return -ESRCH;
2744 put_pid(xchg(&cad_pid, new_pid));
2745 return 0;
2749 * proc_do_large_bitmap - read/write from/to a large bitmap
2750 * @table: the sysctl table
2751 * @write: %TRUE if this is a write to the sysctl file
2752 * @buffer: the user buffer
2753 * @lenp: the size of the user buffer
2754 * @ppos: file position
2756 * The bitmap is stored at table->data and the bitmap length (in bits)
2757 * in table->maxlen.
2759 * We use a range comma separated format (e.g. 1,3-4,10-10) so that
2760 * large bitmaps may be represented in a compact manner. Writing into
2761 * the file will clear the bitmap then update it with the given input.
2763 * Returns 0 on success.
2765 int proc_do_large_bitmap(struct ctl_table *table, int write,
2766 void __user *buffer, size_t *lenp, loff_t *ppos)
2768 int err = 0;
2769 bool first = 1;
2770 size_t left = *lenp;
2771 unsigned long bitmap_len = table->maxlen;
2772 unsigned long *bitmap = (unsigned long *) table->data;
2773 unsigned long *tmp_bitmap = NULL;
2774 char tr_a[] = { '-', ',', '\n' }, tr_b[] = { ',', '\n', 0 }, c;
2776 if (!bitmap_len || !left || (*ppos && !write)) {
2777 *lenp = 0;
2778 return 0;
2781 if (write) {
2782 unsigned long page = 0;
2783 char *kbuf;
2785 if (left > PAGE_SIZE - 1)
2786 left = PAGE_SIZE - 1;
2788 page = __get_free_page(GFP_TEMPORARY);
2789 kbuf = (char *) page;
2790 if (!kbuf)
2791 return -ENOMEM;
2792 if (copy_from_user(kbuf, buffer, left)) {
2793 free_page(page);
2794 return -EFAULT;
2796 kbuf[left] = 0;
2798 tmp_bitmap = kzalloc(BITS_TO_LONGS(bitmap_len) * sizeof(unsigned long),
2799 GFP_KERNEL);
2800 if (!tmp_bitmap) {
2801 free_page(page);
2802 return -ENOMEM;
2804 proc_skip_char(&kbuf, &left, '\n');
2805 while (!err && left) {
2806 unsigned long val_a, val_b;
2807 bool neg;
2809 err = proc_get_long(&kbuf, &left, &val_a, &neg, tr_a,
2810 sizeof(tr_a), &c);
2811 if (err)
2812 break;
2813 if (val_a >= bitmap_len || neg) {
2814 err = -EINVAL;
2815 break;
2818 val_b = val_a;
2819 if (left) {
2820 kbuf++;
2821 left--;
2824 if (c == '-') {
2825 err = proc_get_long(&kbuf, &left, &val_b,
2826 &neg, tr_b, sizeof(tr_b),
2827 &c);
2828 if (err)
2829 break;
2830 if (val_b >= bitmap_len || neg ||
2831 val_a > val_b) {
2832 err = -EINVAL;
2833 break;
2835 if (left) {
2836 kbuf++;
2837 left--;
2841 while (val_a <= val_b)
2842 set_bit(val_a++, tmp_bitmap);
2844 first = 0;
2845 proc_skip_char(&kbuf, &left, '\n');
2847 free_page(page);
2848 } else {
2849 unsigned long bit_a, bit_b = 0;
2851 while (left) {
2852 bit_a = find_next_bit(bitmap, bitmap_len, bit_b);
2853 if (bit_a >= bitmap_len)
2854 break;
2855 bit_b = find_next_zero_bit(bitmap, bitmap_len,
2856 bit_a + 1) - 1;
2858 if (!first) {
2859 err = proc_put_char(&buffer, &left, ',');
2860 if (err)
2861 break;
2863 err = proc_put_long(&buffer, &left, bit_a, false);
2864 if (err)
2865 break;
2866 if (bit_a != bit_b) {
2867 err = proc_put_char(&buffer, &left, '-');
2868 if (err)
2869 break;
2870 err = proc_put_long(&buffer, &left, bit_b, false);
2871 if (err)
2872 break;
2875 first = 0; bit_b++;
2877 if (!err)
2878 err = proc_put_char(&buffer, &left, '\n');
2881 if (!err) {
2882 if (write) {
2883 if (*ppos)
2884 bitmap_or(bitmap, bitmap, tmp_bitmap, bitmap_len);
2885 else
2886 memcpy(bitmap, tmp_bitmap,
2887 BITS_TO_LONGS(bitmap_len) * sizeof(unsigned long));
2889 kfree(tmp_bitmap);
2890 *lenp -= left;
2891 *ppos += *lenp;
2892 return 0;
2893 } else {
2894 kfree(tmp_bitmap);
2895 return err;
2899 #else /* CONFIG_PROC_FS */
2901 int proc_dostring(struct ctl_table *table, int write,
2902 void __user *buffer, size_t *lenp, loff_t *ppos)
2904 return -ENOSYS;
2907 int proc_dointvec(struct ctl_table *table, int write,
2908 void __user *buffer, size_t *lenp, loff_t *ppos)
2910 return -ENOSYS;
2913 int proc_dointvec_minmax(struct ctl_table *table, int write,
2914 void __user *buffer, size_t *lenp, loff_t *ppos)
2916 return -ENOSYS;
2919 int proc_dointvec_jiffies(struct ctl_table *table, int write,
2920 void __user *buffer, size_t *lenp, loff_t *ppos)
2922 return -ENOSYS;
2925 int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
2926 void __user *buffer, size_t *lenp, loff_t *ppos)
2928 return -ENOSYS;
2931 int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
2932 void __user *buffer, size_t *lenp, loff_t *ppos)
2934 return -ENOSYS;
2937 int proc_doulongvec_minmax(struct ctl_table *table, int write,
2938 void __user *buffer, size_t *lenp, loff_t *ppos)
2940 return -ENOSYS;
2943 int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
2944 void __user *buffer,
2945 size_t *lenp, loff_t *ppos)
2947 return -ENOSYS;
2951 #endif /* CONFIG_PROC_FS */
2954 * No sense putting this after each symbol definition, twice,
2955 * exception granted :-)
2957 EXPORT_SYMBOL(proc_dointvec);
2958 EXPORT_SYMBOL(proc_dointvec_jiffies);
2959 EXPORT_SYMBOL(proc_dointvec_minmax);
2960 EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);
2961 EXPORT_SYMBOL(proc_dointvec_ms_jiffies);
2962 EXPORT_SYMBOL(proc_dostring);
2963 EXPORT_SYMBOL(proc_doulongvec_minmax);
2964 EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax);
2965 EXPORT_SYMBOL(register_sysctl_table);
2966 EXPORT_SYMBOL(register_sysctl_paths);
2967 EXPORT_SYMBOL(unregister_sysctl_table);