[PATCH] OHCI PM updates
[linux-2.6/x86.git] / drivers / scsi / ipr.c
blobe0039dfae8e5ef8fc9ae9db1070b2e6ad652ae72
1 /*
2 * ipr.c -- driver for IBM Power Linux RAID adapters
4 * Written By: Brian King <brking@us.ibm.com>, IBM Corporation
6 * Copyright (C) 2003, 2004 IBM Corporation
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 * Notes:
27 * This driver is used to control the following SCSI adapters:
29 * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B
31 * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter
32 * PCI-X Dual Channel Ultra 320 SCSI Adapter
33 * PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card
34 * Embedded SCSI adapter on p615 and p655 systems
36 * Supported Hardware Features:
37 * - Ultra 320 SCSI controller
38 * - PCI-X host interface
39 * - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine
40 * - Non-Volatile Write Cache
41 * - Supports attachment of non-RAID disks, tape, and optical devices
42 * - RAID Levels 0, 5, 10
43 * - Hot spare
44 * - Background Parity Checking
45 * - Background Data Scrubbing
46 * - Ability to increase the capacity of an existing RAID 5 disk array
47 * by adding disks
49 * Driver Features:
50 * - Tagged command queuing
51 * - Adapter microcode download
52 * - PCI hot plug
53 * - SCSI device hot plug
57 #include <linux/config.h>
58 #include <linux/fs.h>
59 #include <linux/init.h>
60 #include <linux/types.h>
61 #include <linux/errno.h>
62 #include <linux/kernel.h>
63 #include <linux/ioport.h>
64 #include <linux/delay.h>
65 #include <linux/pci.h>
66 #include <linux/wait.h>
67 #include <linux/spinlock.h>
68 #include <linux/sched.h>
69 #include <linux/interrupt.h>
70 #include <linux/blkdev.h>
71 #include <linux/firmware.h>
72 #include <linux/module.h>
73 #include <linux/moduleparam.h>
74 #include <asm/io.h>
75 #include <asm/irq.h>
76 #include <asm/processor.h>
77 #include <scsi/scsi.h>
78 #include <scsi/scsi_host.h>
79 #include <scsi/scsi_tcq.h>
80 #include <scsi/scsi_eh.h>
81 #include <scsi/scsi_cmnd.h>
82 #include <scsi/scsi_request.h>
83 #include "ipr.h"
86 * Global Data
88 static struct list_head ipr_ioa_head = LIST_HEAD_INIT(ipr_ioa_head);
89 static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL;
90 static unsigned int ipr_max_speed = 1;
91 static int ipr_testmode = 0;
92 static unsigned int ipr_fastfail = 0;
93 static unsigned int ipr_transop_timeout = IPR_OPERATIONAL_TIMEOUT;
94 static DEFINE_SPINLOCK(ipr_driver_lock);
96 /* This table describes the differences between DMA controller chips */
97 static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
98 { /* Gemstone and Citrine */
99 .mailbox = 0x0042C,
100 .cache_line_size = 0x20,
102 .set_interrupt_mask_reg = 0x0022C,
103 .clr_interrupt_mask_reg = 0x00230,
104 .sense_interrupt_mask_reg = 0x0022C,
105 .clr_interrupt_reg = 0x00228,
106 .sense_interrupt_reg = 0x00224,
107 .ioarrin_reg = 0x00404,
108 .sense_uproc_interrupt_reg = 0x00214,
109 .set_uproc_interrupt_reg = 0x00214,
110 .clr_uproc_interrupt_reg = 0x00218
113 { /* Snipe and Scamp */
114 .mailbox = 0x0052C,
115 .cache_line_size = 0x20,
117 .set_interrupt_mask_reg = 0x00288,
118 .clr_interrupt_mask_reg = 0x0028C,
119 .sense_interrupt_mask_reg = 0x00288,
120 .clr_interrupt_reg = 0x00284,
121 .sense_interrupt_reg = 0x00280,
122 .ioarrin_reg = 0x00504,
123 .sense_uproc_interrupt_reg = 0x00290,
124 .set_uproc_interrupt_reg = 0x00290,
125 .clr_uproc_interrupt_reg = 0x00294
130 static const struct ipr_chip_t ipr_chip[] = {
131 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, &ipr_chip_cfg[0] },
132 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, &ipr_chip_cfg[0] },
133 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, &ipr_chip_cfg[1] },
134 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, &ipr_chip_cfg[1] }
137 static int ipr_max_bus_speeds [] = {
138 IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE
141 MODULE_AUTHOR("Brian King <brking@us.ibm.com>");
142 MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver");
143 module_param_named(max_speed, ipr_max_speed, uint, 0);
144 MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320");
145 module_param_named(log_level, ipr_log_level, uint, 0);
146 MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver");
147 module_param_named(testmode, ipr_testmode, int, 0);
148 MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations");
149 module_param_named(fastfail, ipr_fastfail, int, 0);
150 MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
151 module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
152 MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)");
153 MODULE_LICENSE("GPL");
154 MODULE_VERSION(IPR_DRIVER_VERSION);
156 static const char *ipr_gpdd_dev_end_states[] = {
157 "Command complete",
158 "Terminated by host",
159 "Terminated by device reset",
160 "Terminated by bus reset",
161 "Unknown",
162 "Command not started"
165 static const char *ipr_gpdd_dev_bus_phases[] = {
166 "Bus free",
167 "Arbitration",
168 "Selection",
169 "Message out",
170 "Command",
171 "Message in",
172 "Data out",
173 "Data in",
174 "Status",
175 "Reselection",
176 "Unknown"
179 /* A constant array of IOASCs/URCs/Error Messages */
180 static const
181 struct ipr_error_table_t ipr_error_table[] = {
182 {0x00000000, 1, 1,
183 "8155: An unknown error was received"},
184 {0x00330000, 0, 0,
185 "Soft underlength error"},
186 {0x005A0000, 0, 0,
187 "Command to be cancelled not found"},
188 {0x00808000, 0, 0,
189 "Qualified success"},
190 {0x01080000, 1, 1,
191 "FFFE: Soft device bus error recovered by the IOA"},
192 {0x01170600, 0, 1,
193 "FFF9: Device sector reassign successful"},
194 {0x01170900, 0, 1,
195 "FFF7: Media error recovered by device rewrite procedures"},
196 {0x01180200, 0, 1,
197 "7001: IOA sector reassignment successful"},
198 {0x01180500, 0, 1,
199 "FFF9: Soft media error. Sector reassignment recommended"},
200 {0x01180600, 0, 1,
201 "FFF7: Media error recovered by IOA rewrite procedures"},
202 {0x01418000, 0, 1,
203 "FF3D: Soft PCI bus error recovered by the IOA"},
204 {0x01440000, 1, 1,
205 "FFF6: Device hardware error recovered by the IOA"},
206 {0x01448100, 0, 1,
207 "FFF6: Device hardware error recovered by the device"},
208 {0x01448200, 1, 1,
209 "FF3D: Soft IOA error recovered by the IOA"},
210 {0x01448300, 0, 1,
211 "FFFA: Undefined device response recovered by the IOA"},
212 {0x014A0000, 1, 1,
213 "FFF6: Device bus error, message or command phase"},
214 {0x015D0000, 0, 1,
215 "FFF6: Failure prediction threshold exceeded"},
216 {0x015D9200, 0, 1,
217 "8009: Impending cache battery pack failure"},
218 {0x02040400, 0, 0,
219 "34FF: Disk device format in progress"},
220 {0x023F0000, 0, 0,
221 "Synchronization required"},
222 {0x024E0000, 0, 0,
223 "No ready, IOA shutdown"},
224 {0x025A0000, 0, 0,
225 "Not ready, IOA has been shutdown"},
226 {0x02670100, 0, 1,
227 "3020: Storage subsystem configuration error"},
228 {0x03110B00, 0, 0,
229 "FFF5: Medium error, data unreadable, recommend reassign"},
230 {0x03110C00, 0, 0,
231 "7000: Medium error, data unreadable, do not reassign"},
232 {0x03310000, 0, 1,
233 "FFF3: Disk media format bad"},
234 {0x04050000, 0, 1,
235 "3002: Addressed device failed to respond to selection"},
236 {0x04080000, 1, 1,
237 "3100: Device bus error"},
238 {0x04080100, 0, 1,
239 "3109: IOA timed out a device command"},
240 {0x04088000, 0, 0,
241 "3120: SCSI bus is not operational"},
242 {0x04118000, 0, 1,
243 "9000: IOA reserved area data check"},
244 {0x04118100, 0, 1,
245 "9001: IOA reserved area invalid data pattern"},
246 {0x04118200, 0, 1,
247 "9002: IOA reserved area LRC error"},
248 {0x04320000, 0, 1,
249 "102E: Out of alternate sectors for disk storage"},
250 {0x04330000, 1, 1,
251 "FFF4: Data transfer underlength error"},
252 {0x04338000, 1, 1,
253 "FFF4: Data transfer overlength error"},
254 {0x043E0100, 0, 1,
255 "3400: Logical unit failure"},
256 {0x04408500, 0, 1,
257 "FFF4: Device microcode is corrupt"},
258 {0x04418000, 1, 1,
259 "8150: PCI bus error"},
260 {0x04430000, 1, 0,
261 "Unsupported device bus message received"},
262 {0x04440000, 1, 1,
263 "FFF4: Disk device problem"},
264 {0x04448200, 1, 1,
265 "8150: Permanent IOA failure"},
266 {0x04448300, 0, 1,
267 "3010: Disk device returned wrong response to IOA"},
268 {0x04448400, 0, 1,
269 "8151: IOA microcode error"},
270 {0x04448500, 0, 0,
271 "Device bus status error"},
272 {0x04448600, 0, 1,
273 "8157: IOA error requiring IOA reset to recover"},
274 {0x04490000, 0, 0,
275 "Message reject received from the device"},
276 {0x04449200, 0, 1,
277 "8008: A permanent cache battery pack failure occurred"},
278 {0x0444A000, 0, 1,
279 "9090: Disk unit has been modified after the last known status"},
280 {0x0444A200, 0, 1,
281 "9081: IOA detected device error"},
282 {0x0444A300, 0, 1,
283 "9082: IOA detected device error"},
284 {0x044A0000, 1, 1,
285 "3110: Device bus error, message or command phase"},
286 {0x04670400, 0, 1,
287 "9091: Incorrect hardware configuration change has been detected"},
288 {0x046E0000, 0, 1,
289 "FFF4: Command to logical unit failed"},
290 {0x05240000, 1, 0,
291 "Illegal request, invalid request type or request packet"},
292 {0x05250000, 0, 0,
293 "Illegal request, invalid resource handle"},
294 {0x05260000, 0, 0,
295 "Illegal request, invalid field in parameter list"},
296 {0x05260100, 0, 0,
297 "Illegal request, parameter not supported"},
298 {0x05260200, 0, 0,
299 "Illegal request, parameter value invalid"},
300 {0x052C0000, 0, 0,
301 "Illegal request, command sequence error"},
302 {0x06040500, 0, 1,
303 "9031: Array protection temporarily suspended, protection resuming"},
304 {0x06040600, 0, 1,
305 "9040: Array protection temporarily suspended, protection resuming"},
306 {0x06290000, 0, 1,
307 "FFFB: SCSI bus was reset"},
308 {0x06290500, 0, 0,
309 "FFFE: SCSI bus transition to single ended"},
310 {0x06290600, 0, 0,
311 "FFFE: SCSI bus transition to LVD"},
312 {0x06298000, 0, 1,
313 "FFFB: SCSI bus was reset by another initiator"},
314 {0x063F0300, 0, 1,
315 "3029: A device replacement has occurred"},
316 {0x064C8000, 0, 1,
317 "9051: IOA cache data exists for a missing or failed device"},
318 {0x06670100, 0, 1,
319 "9025: Disk unit is not supported at its physical location"},
320 {0x06670600, 0, 1,
321 "3020: IOA detected a SCSI bus configuration error"},
322 {0x06678000, 0, 1,
323 "3150: SCSI bus configuration error"},
324 {0x06690200, 0, 1,
325 "9041: Array protection temporarily suspended"},
326 {0x06698200, 0, 1,
327 "9042: Corrupt array parity detected on specified device"},
328 {0x066B0200, 0, 1,
329 "9030: Array no longer protected due to missing or failed disk unit"},
330 {0x066B8200, 0, 1,
331 "9032: Array exposed but still protected"},
332 {0x07270000, 0, 0,
333 "Failure due to other device"},
334 {0x07278000, 0, 1,
335 "9008: IOA does not support functions expected by devices"},
336 {0x07278100, 0, 1,
337 "9010: Cache data associated with attached devices cannot be found"},
338 {0x07278200, 0, 1,
339 "9011: Cache data belongs to devices other than those attached"},
340 {0x07278400, 0, 1,
341 "9020: Array missing 2 or more devices with only 1 device present"},
342 {0x07278500, 0, 1,
343 "9021: Array missing 2 or more devices with 2 or more devices present"},
344 {0x07278600, 0, 1,
345 "9022: Exposed array is missing a required device"},
346 {0x07278700, 0, 1,
347 "9023: Array member(s) not at required physical locations"},
348 {0x07278800, 0, 1,
349 "9024: Array not functional due to present hardware configuration"},
350 {0x07278900, 0, 1,
351 "9026: Array not functional due to present hardware configuration"},
352 {0x07278A00, 0, 1,
353 "9027: Array is missing a device and parity is out of sync"},
354 {0x07278B00, 0, 1,
355 "9028: Maximum number of arrays already exist"},
356 {0x07278C00, 0, 1,
357 "9050: Required cache data cannot be located for a disk unit"},
358 {0x07278D00, 0, 1,
359 "9052: Cache data exists for a device that has been modified"},
360 {0x07278F00, 0, 1,
361 "9054: IOA resources not available due to previous problems"},
362 {0x07279100, 0, 1,
363 "9092: Disk unit requires initialization before use"},
364 {0x07279200, 0, 1,
365 "9029: Incorrect hardware configuration change has been detected"},
366 {0x07279600, 0, 1,
367 "9060: One or more disk pairs are missing from an array"},
368 {0x07279700, 0, 1,
369 "9061: One or more disks are missing from an array"},
370 {0x07279800, 0, 1,
371 "9062: One or more disks are missing from an array"},
372 {0x07279900, 0, 1,
373 "9063: Maximum number of functional arrays has been exceeded"},
374 {0x0B260000, 0, 0,
375 "Aborted command, invalid descriptor"},
376 {0x0B5A0000, 0, 0,
377 "Command terminated by host"}
380 static const struct ipr_ses_table_entry ipr_ses_table[] = {
381 { "2104-DL1 ", "XXXXXXXXXXXXXXXX", 80 },
382 { "2104-TL1 ", "XXXXXXXXXXXXXXXX", 80 },
383 { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */
384 { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */
385 { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */
386 { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */
387 { "2104-DU3 ", "XXXXXXXXXXXXXXXX", 160 },
388 { "2104-TU3 ", "XXXXXXXXXXXXXXXX", 160 },
389 { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
390 { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
391 { "St V1S2 ", "XXXXXXXXXXXXXXXX", 160 },
392 { "HSBPD4M PU3SCSI", "XXXXXXX*XXXXXXXX", 160 },
393 { "VSBPD1H U3SCSI", "XXXXXXX*XXXXXXXX", 160 }
397 * Function Prototypes
399 static int ipr_reset_alert(struct ipr_cmnd *);
400 static void ipr_process_ccn(struct ipr_cmnd *);
401 static void ipr_process_error(struct ipr_cmnd *);
402 static void ipr_reset_ioa_job(struct ipr_cmnd *);
403 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *,
404 enum ipr_shutdown_type);
406 #ifdef CONFIG_SCSI_IPR_TRACE
408 * ipr_trc_hook - Add a trace entry to the driver trace
409 * @ipr_cmd: ipr command struct
410 * @type: trace type
411 * @add_data: additional data
413 * Return value:
414 * none
416 static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd,
417 u8 type, u32 add_data)
419 struct ipr_trace_entry *trace_entry;
420 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
422 trace_entry = &ioa_cfg->trace[ioa_cfg->trace_index++];
423 trace_entry->time = jiffies;
424 trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
425 trace_entry->type = type;
426 trace_entry->cmd_index = ipr_cmd->cmd_index;
427 trace_entry->res_handle = ipr_cmd->ioarcb.res_handle;
428 trace_entry->u.add_data = add_data;
430 #else
431 #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0)
432 #endif
435 * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse
436 * @ipr_cmd: ipr command struct
438 * Return value:
439 * none
441 static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
443 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
444 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
446 memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
447 ioarcb->write_data_transfer_length = 0;
448 ioarcb->read_data_transfer_length = 0;
449 ioarcb->write_ioadl_len = 0;
450 ioarcb->read_ioadl_len = 0;
451 ioasa->ioasc = 0;
452 ioasa->residual_data_len = 0;
454 ipr_cmd->scsi_cmd = NULL;
455 ipr_cmd->sense_buffer[0] = 0;
456 ipr_cmd->dma_use_sg = 0;
460 * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block
461 * @ipr_cmd: ipr command struct
463 * Return value:
464 * none
466 static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
468 ipr_reinit_ipr_cmnd(ipr_cmd);
469 ipr_cmd->u.scratch = 0;
470 ipr_cmd->sibling = NULL;
471 init_timer(&ipr_cmd->timer);
475 * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block
476 * @ioa_cfg: ioa config struct
478 * Return value:
479 * pointer to ipr command struct
481 static
482 struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg)
484 struct ipr_cmnd *ipr_cmd;
486 ipr_cmd = list_entry(ioa_cfg->free_q.next, struct ipr_cmnd, queue);
487 list_del(&ipr_cmd->queue);
488 ipr_init_ipr_cmnd(ipr_cmd);
490 return ipr_cmd;
494 * ipr_unmap_sglist - Unmap scatterlist if mapped
495 * @ioa_cfg: ioa config struct
496 * @ipr_cmd: ipr command struct
498 * Return value:
499 * nothing
501 static void ipr_unmap_sglist(struct ipr_ioa_cfg *ioa_cfg,
502 struct ipr_cmnd *ipr_cmd)
504 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
506 if (ipr_cmd->dma_use_sg) {
507 if (scsi_cmd->use_sg > 0) {
508 pci_unmap_sg(ioa_cfg->pdev, scsi_cmd->request_buffer,
509 scsi_cmd->use_sg,
510 scsi_cmd->sc_data_direction);
511 } else {
512 pci_unmap_single(ioa_cfg->pdev, ipr_cmd->dma_handle,
513 scsi_cmd->request_bufflen,
514 scsi_cmd->sc_data_direction);
520 * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts
521 * @ioa_cfg: ioa config struct
522 * @clr_ints: interrupts to clear
524 * This function masks all interrupts on the adapter, then clears the
525 * interrupts specified in the mask
527 * Return value:
528 * none
530 static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg,
531 u32 clr_ints)
533 volatile u32 int_reg;
535 /* Stop new interrupts */
536 ioa_cfg->allow_interrupts = 0;
538 /* Set interrupt mask to stop all new interrupts */
539 writel(~0, ioa_cfg->regs.set_interrupt_mask_reg);
541 /* Clear any pending interrupts */
542 writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg);
543 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
547 * ipr_save_pcix_cmd_reg - Save PCI-X command register
548 * @ioa_cfg: ioa config struct
550 * Return value:
551 * 0 on success / -EIO on failure
553 static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
555 int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
557 if (pcix_cmd_reg == 0) {
558 dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
559 return -EIO;
562 if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
563 &ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
564 dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
565 return -EIO;
568 ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO;
569 return 0;
573 * ipr_set_pcix_cmd_reg - Setup PCI-X command register
574 * @ioa_cfg: ioa config struct
576 * Return value:
577 * 0 on success / -EIO on failure
579 static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
581 int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
583 if (pcix_cmd_reg) {
584 if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
585 ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
586 dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n");
587 return -EIO;
589 } else {
590 dev_err(&ioa_cfg->pdev->dev,
591 "Failed to setup PCI-X command register\n");
592 return -EIO;
595 return 0;
599 * ipr_scsi_eh_done - mid-layer done function for aborted ops
600 * @ipr_cmd: ipr command struct
602 * This function is invoked by the interrupt handler for
603 * ops generated by the SCSI mid-layer which are being aborted.
605 * Return value:
606 * none
608 static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd)
610 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
611 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
613 scsi_cmd->result |= (DID_ERROR << 16);
615 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
616 scsi_cmd->scsi_done(scsi_cmd);
617 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
621 * ipr_fail_all_ops - Fails all outstanding ops.
622 * @ioa_cfg: ioa config struct
624 * This function fails all outstanding ops.
626 * Return value:
627 * none
629 static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg)
631 struct ipr_cmnd *ipr_cmd, *temp;
633 ENTER;
634 list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) {
635 list_del(&ipr_cmd->queue);
637 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET);
638 ipr_cmd->ioasa.ilid = cpu_to_be32(IPR_DRIVER_ILID);
640 if (ipr_cmd->scsi_cmd)
641 ipr_cmd->done = ipr_scsi_eh_done;
643 ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, IPR_IOASC_IOA_WAS_RESET);
644 del_timer(&ipr_cmd->timer);
645 ipr_cmd->done(ipr_cmd);
648 LEAVE;
652 * ipr_do_req - Send driver initiated requests.
653 * @ipr_cmd: ipr command struct
654 * @done: done function
655 * @timeout_func: timeout function
656 * @timeout: timeout value
658 * This function sends the specified command to the adapter with the
659 * timeout given. The done function is invoked on command completion.
661 * Return value:
662 * none
664 static void ipr_do_req(struct ipr_cmnd *ipr_cmd,
665 void (*done) (struct ipr_cmnd *),
666 void (*timeout_func) (struct ipr_cmnd *), u32 timeout)
668 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
670 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
672 ipr_cmd->done = done;
674 ipr_cmd->timer.data = (unsigned long) ipr_cmd;
675 ipr_cmd->timer.expires = jiffies + timeout;
676 ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func;
678 add_timer(&ipr_cmd->timer);
680 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0);
682 mb();
683 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
684 ioa_cfg->regs.ioarrin_reg);
688 * ipr_internal_cmd_done - Op done function for an internally generated op.
689 * @ipr_cmd: ipr command struct
691 * This function is the op done function for an internally generated,
692 * blocking op. It simply wakes the sleeping thread.
694 * Return value:
695 * none
697 static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd)
699 if (ipr_cmd->sibling)
700 ipr_cmd->sibling = NULL;
701 else
702 complete(&ipr_cmd->completion);
706 * ipr_send_blocking_cmd - Send command and sleep on its completion.
707 * @ipr_cmd: ipr command struct
708 * @timeout_func: function to invoke if command times out
709 * @timeout: timeout
711 * Return value:
712 * none
714 static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd,
715 void (*timeout_func) (struct ipr_cmnd *ipr_cmd),
716 u32 timeout)
718 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
720 init_completion(&ipr_cmd->completion);
721 ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout);
723 spin_unlock_irq(ioa_cfg->host->host_lock);
724 wait_for_completion(&ipr_cmd->completion);
725 spin_lock_irq(ioa_cfg->host->host_lock);
729 * ipr_send_hcam - Send an HCAM to the adapter.
730 * @ioa_cfg: ioa config struct
731 * @type: HCAM type
732 * @hostrcb: hostrcb struct
734 * This function will send a Host Controlled Async command to the adapter.
735 * If HCAMs are currently not allowed to be issued to the adapter, it will
736 * place the hostrcb on the free queue.
738 * Return value:
739 * none
741 static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
742 struct ipr_hostrcb *hostrcb)
744 struct ipr_cmnd *ipr_cmd;
745 struct ipr_ioarcb *ioarcb;
747 if (ioa_cfg->allow_cmds) {
748 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
749 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
750 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q);
752 ipr_cmd->u.hostrcb = hostrcb;
753 ioarcb = &ipr_cmd->ioarcb;
755 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
756 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM;
757 ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC;
758 ioarcb->cmd_pkt.cdb[1] = type;
759 ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff;
760 ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff;
762 ioarcb->read_data_transfer_length = cpu_to_be32(sizeof(hostrcb->hcam));
763 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
764 ipr_cmd->ioadl[0].flags_and_data_len =
765 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(hostrcb->hcam));
766 ipr_cmd->ioadl[0].address = cpu_to_be32(hostrcb->hostrcb_dma);
768 if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE)
769 ipr_cmd->done = ipr_process_ccn;
770 else
771 ipr_cmd->done = ipr_process_error;
773 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR);
775 mb();
776 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
777 ioa_cfg->regs.ioarrin_reg);
778 } else {
779 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
784 * ipr_init_res_entry - Initialize a resource entry struct.
785 * @res: resource entry struct
787 * Return value:
788 * none
790 static void ipr_init_res_entry(struct ipr_resource_entry *res)
792 res->needs_sync_complete = 1;
793 res->in_erp = 0;
794 res->add_to_ml = 0;
795 res->del_from_ml = 0;
796 res->resetting_device = 0;
797 res->sdev = NULL;
801 * ipr_handle_config_change - Handle a config change from the adapter
802 * @ioa_cfg: ioa config struct
803 * @hostrcb: hostrcb
805 * Return value:
806 * none
808 static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
809 struct ipr_hostrcb *hostrcb)
811 struct ipr_resource_entry *res = NULL;
812 struct ipr_config_table_entry *cfgte;
813 u32 is_ndn = 1;
815 cfgte = &hostrcb->hcam.u.ccn.cfgte;
817 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
818 if (!memcmp(&res->cfgte.res_addr, &cfgte->res_addr,
819 sizeof(cfgte->res_addr))) {
820 is_ndn = 0;
821 break;
825 if (is_ndn) {
826 if (list_empty(&ioa_cfg->free_res_q)) {
827 ipr_send_hcam(ioa_cfg,
828 IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE,
829 hostrcb);
830 return;
833 res = list_entry(ioa_cfg->free_res_q.next,
834 struct ipr_resource_entry, queue);
836 list_del(&res->queue);
837 ipr_init_res_entry(res);
838 list_add_tail(&res->queue, &ioa_cfg->used_res_q);
841 memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
843 if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) {
844 if (res->sdev) {
845 res->sdev->hostdata = NULL;
846 res->del_from_ml = 1;
847 if (ioa_cfg->allow_ml_add_del)
848 schedule_work(&ioa_cfg->work_q);
849 } else
850 list_move_tail(&res->queue, &ioa_cfg->free_res_q);
851 } else if (!res->sdev) {
852 res->add_to_ml = 1;
853 if (ioa_cfg->allow_ml_add_del)
854 schedule_work(&ioa_cfg->work_q);
857 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
861 * ipr_process_ccn - Op done function for a CCN.
862 * @ipr_cmd: ipr command struct
864 * This function is the op done function for a configuration
865 * change notification host controlled async from the adapter.
867 * Return value:
868 * none
870 static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd)
872 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
873 struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
874 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
876 list_del(&hostrcb->queue);
877 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
879 if (ioasc) {
880 if (ioasc != IPR_IOASC_IOA_WAS_RESET)
881 dev_err(&ioa_cfg->pdev->dev,
882 "Host RCB failed with IOASC: 0x%08X\n", ioasc);
884 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
885 } else {
886 ipr_handle_config_change(ioa_cfg, hostrcb);
891 * ipr_log_vpd - Log the passed VPD to the error log.
892 * @vpids: vendor/product id struct
893 * @serial_num: serial number string
895 * Return value:
896 * none
898 static void ipr_log_vpd(struct ipr_std_inq_vpids *vpids, u8 *serial_num)
900 char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN
901 + IPR_SERIAL_NUM_LEN];
903 memcpy(buffer, vpids->vendor_id, IPR_VENDOR_ID_LEN);
904 memcpy(buffer + IPR_VENDOR_ID_LEN, vpids->product_id,
905 IPR_PROD_ID_LEN);
906 buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0';
907 ipr_err("Vendor/Product ID: %s\n", buffer);
909 memcpy(buffer, serial_num, IPR_SERIAL_NUM_LEN);
910 buffer[IPR_SERIAL_NUM_LEN] = '\0';
911 ipr_err(" Serial Number: %s\n", buffer);
915 * ipr_log_cache_error - Log a cache error.
916 * @ioa_cfg: ioa config struct
917 * @hostrcb: hostrcb struct
919 * Return value:
920 * none
922 static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg,
923 struct ipr_hostrcb *hostrcb)
925 struct ipr_hostrcb_type_02_error *error =
926 &hostrcb->hcam.u.error.u.type_02_error;
928 ipr_err("-----Current Configuration-----\n");
929 ipr_err("Cache Directory Card Information:\n");
930 ipr_log_vpd(&error->ioa_vpids, error->ioa_sn);
931 ipr_err("Adapter Card Information:\n");
932 ipr_log_vpd(&error->cfc_vpids, error->cfc_sn);
934 ipr_err("-----Expected Configuration-----\n");
935 ipr_err("Cache Directory Card Information:\n");
936 ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpids,
937 error->ioa_last_attached_to_cfc_sn);
938 ipr_err("Adapter Card Information:\n");
939 ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpids,
940 error->cfc_last_attached_to_ioa_sn);
942 ipr_err("Additional IOA Data: %08X %08X %08X\n",
943 be32_to_cpu(error->ioa_data[0]),
944 be32_to_cpu(error->ioa_data[1]),
945 be32_to_cpu(error->ioa_data[2]));
949 * ipr_log_config_error - Log a configuration error.
950 * @ioa_cfg: ioa config struct
951 * @hostrcb: hostrcb struct
953 * Return value:
954 * none
956 static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg,
957 struct ipr_hostrcb *hostrcb)
959 int errors_logged, i;
960 struct ipr_hostrcb_device_data_entry *dev_entry;
961 struct ipr_hostrcb_type_03_error *error;
963 error = &hostrcb->hcam.u.error.u.type_03_error;
964 errors_logged = be32_to_cpu(error->errors_logged);
966 ipr_err("Device Errors Detected/Logged: %d/%d\n",
967 be32_to_cpu(error->errors_detected), errors_logged);
969 dev_entry = error->dev_entry;
971 for (i = 0; i < errors_logged; i++, dev_entry++) {
972 ipr_err_separator;
974 if (dev_entry->dev_res_addr.bus >= IPR_MAX_NUM_BUSES) {
975 ipr_err("Device %d: missing\n", i + 1);
976 } else {
977 ipr_err("Device %d: %d:%d:%d:%d\n", i + 1,
978 ioa_cfg->host->host_no, dev_entry->dev_res_addr.bus,
979 dev_entry->dev_res_addr.target, dev_entry->dev_res_addr.lun);
981 ipr_log_vpd(&dev_entry->dev_vpids, dev_entry->dev_sn);
983 ipr_err("-----New Device Information-----\n");
984 ipr_log_vpd(&dev_entry->new_dev_vpids, dev_entry->new_dev_sn);
986 ipr_err("Cache Directory Card Information:\n");
987 ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpids,
988 dev_entry->ioa_last_with_dev_sn);
990 ipr_err("Adapter Card Information:\n");
991 ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpids,
992 dev_entry->cfc_last_with_dev_sn);
994 ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n",
995 be32_to_cpu(dev_entry->ioa_data[0]),
996 be32_to_cpu(dev_entry->ioa_data[1]),
997 be32_to_cpu(dev_entry->ioa_data[2]),
998 be32_to_cpu(dev_entry->ioa_data[3]),
999 be32_to_cpu(dev_entry->ioa_data[4]));
1004 * ipr_log_array_error - Log an array configuration error.
1005 * @ioa_cfg: ioa config struct
1006 * @hostrcb: hostrcb struct
1008 * Return value:
1009 * none
1011 static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg,
1012 struct ipr_hostrcb *hostrcb)
1014 int i;
1015 struct ipr_hostrcb_type_04_error *error;
1016 struct ipr_hostrcb_array_data_entry *array_entry;
1017 const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
1019 error = &hostrcb->hcam.u.error.u.type_04_error;
1021 ipr_err_separator;
1023 ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1024 error->protection_level,
1025 ioa_cfg->host->host_no,
1026 error->last_func_vset_res_addr.bus,
1027 error->last_func_vset_res_addr.target,
1028 error->last_func_vset_res_addr.lun);
1030 ipr_err_separator;
1032 array_entry = error->array_member;
1034 for (i = 0; i < 18; i++) {
1035 if (!memcmp(array_entry->serial_num, zero_sn, IPR_SERIAL_NUM_LEN))
1036 continue;
1038 if (be32_to_cpu(error->exposed_mode_adn) == i) {
1039 ipr_err("Exposed Array Member %d:\n", i);
1040 } else {
1041 ipr_err("Array Member %d:\n", i);
1044 ipr_log_vpd(&array_entry->vpids, array_entry->serial_num);
1046 if (array_entry->dev_res_addr.bus >= IPR_MAX_NUM_BUSES) {
1047 ipr_err("Current Location: unknown\n");
1048 } else {
1049 ipr_err("Current Location: %d:%d:%d:%d\n",
1050 ioa_cfg->host->host_no,
1051 array_entry->dev_res_addr.bus,
1052 array_entry->dev_res_addr.target,
1053 array_entry->dev_res_addr.lun);
1056 if (array_entry->expected_dev_res_addr.bus >= IPR_MAX_NUM_BUSES) {
1057 ipr_err("Expected Location: unknown\n");
1058 } else {
1059 ipr_err("Expected Location: %d:%d:%d:%d\n",
1060 ioa_cfg->host->host_no,
1061 array_entry->expected_dev_res_addr.bus,
1062 array_entry->expected_dev_res_addr.target,
1063 array_entry->expected_dev_res_addr.lun);
1066 ipr_err_separator;
1068 if (i == 9)
1069 array_entry = error->array_member2;
1070 else
1071 array_entry++;
1076 * ipr_log_generic_error - Log an adapter error.
1077 * @ioa_cfg: ioa config struct
1078 * @hostrcb: hostrcb struct
1080 * Return value:
1081 * none
1083 static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg,
1084 struct ipr_hostrcb *hostrcb)
1086 int i;
1087 int ioa_data_len = be32_to_cpu(hostrcb->hcam.length);
1089 if (ioa_data_len == 0)
1090 return;
1092 ipr_err("IOA Error Data:\n");
1093 ipr_err("Offset 0 1 2 3 4 5 6 7 8 9 A B C D E F\n");
1095 for (i = 0; i < ioa_data_len / 4; i += 4) {
1096 ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
1097 be32_to_cpu(hostrcb->hcam.u.raw.data[i]),
1098 be32_to_cpu(hostrcb->hcam.u.raw.data[i+1]),
1099 be32_to_cpu(hostrcb->hcam.u.raw.data[i+2]),
1100 be32_to_cpu(hostrcb->hcam.u.raw.data[i+3]));
1105 * ipr_get_error - Find the specfied IOASC in the ipr_error_table.
1106 * @ioasc: IOASC
1108 * This function will return the index of into the ipr_error_table
1109 * for the specified IOASC. If the IOASC is not in the table,
1110 * 0 will be returned, which points to the entry used for unknown errors.
1112 * Return value:
1113 * index into the ipr_error_table
1115 static u32 ipr_get_error(u32 ioasc)
1117 int i;
1119 for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++)
1120 if (ipr_error_table[i].ioasc == ioasc)
1121 return i;
1123 return 0;
1127 * ipr_handle_log_data - Log an adapter error.
1128 * @ioa_cfg: ioa config struct
1129 * @hostrcb: hostrcb struct
1131 * This function logs an adapter error to the system.
1133 * Return value:
1134 * none
1136 static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
1137 struct ipr_hostrcb *hostrcb)
1139 u32 ioasc;
1140 int error_index;
1142 if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY)
1143 return;
1145 if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST)
1146 dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n");
1148 ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
1150 if (ioasc == IPR_IOASC_BUS_WAS_RESET ||
1151 ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER) {
1152 /* Tell the midlayer we had a bus reset so it will handle the UA properly */
1153 scsi_report_bus_reset(ioa_cfg->host,
1154 hostrcb->hcam.u.error.failing_dev_res_addr.bus);
1157 error_index = ipr_get_error(ioasc);
1159 if (!ipr_error_table[error_index].log_hcam)
1160 return;
1162 if (ipr_is_device(&hostrcb->hcam.u.error.failing_dev_res_addr)) {
1163 ipr_res_err(ioa_cfg, hostrcb->hcam.u.error.failing_dev_res_addr,
1164 "%s\n", ipr_error_table[error_index].error);
1165 } else {
1166 dev_err(&ioa_cfg->pdev->dev, "%s\n",
1167 ipr_error_table[error_index].error);
1170 /* Set indication we have logged an error */
1171 ioa_cfg->errors_logged++;
1173 if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
1174 return;
1176 switch (hostrcb->hcam.overlay_id) {
1177 case IPR_HOST_RCB_OVERLAY_ID_1:
1178 ipr_log_generic_error(ioa_cfg, hostrcb);
1179 break;
1180 case IPR_HOST_RCB_OVERLAY_ID_2:
1181 ipr_log_cache_error(ioa_cfg, hostrcb);
1182 break;
1183 case IPR_HOST_RCB_OVERLAY_ID_3:
1184 ipr_log_config_error(ioa_cfg, hostrcb);
1185 break;
1186 case IPR_HOST_RCB_OVERLAY_ID_4:
1187 case IPR_HOST_RCB_OVERLAY_ID_6:
1188 ipr_log_array_error(ioa_cfg, hostrcb);
1189 break;
1190 case IPR_HOST_RCB_OVERLAY_ID_DEFAULT:
1191 ipr_log_generic_error(ioa_cfg, hostrcb);
1192 break;
1193 default:
1194 dev_err(&ioa_cfg->pdev->dev,
1195 "Unknown error received. Overlay ID: %d\n",
1196 hostrcb->hcam.overlay_id);
1197 break;
1202 * ipr_process_error - Op done function for an adapter error log.
1203 * @ipr_cmd: ipr command struct
1205 * This function is the op done function for an error log host
1206 * controlled async from the adapter. It will log the error and
1207 * send the HCAM back to the adapter.
1209 * Return value:
1210 * none
1212 static void ipr_process_error(struct ipr_cmnd *ipr_cmd)
1214 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1215 struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
1216 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
1218 list_del(&hostrcb->queue);
1219 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
1221 if (!ioasc) {
1222 ipr_handle_log_data(ioa_cfg, hostrcb);
1223 } else if (ioasc != IPR_IOASC_IOA_WAS_RESET) {
1224 dev_err(&ioa_cfg->pdev->dev,
1225 "Host RCB failed with IOASC: 0x%08X\n", ioasc);
1228 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
1232 * ipr_timeout - An internally generated op has timed out.
1233 * @ipr_cmd: ipr command struct
1235 * This function blocks host requests and initiates an
1236 * adapter reset.
1238 * Return value:
1239 * none
1241 static void ipr_timeout(struct ipr_cmnd *ipr_cmd)
1243 unsigned long lock_flags = 0;
1244 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1246 ENTER;
1247 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1249 ioa_cfg->errors_logged++;
1250 dev_err(&ioa_cfg->pdev->dev,
1251 "Adapter being reset due to command timeout.\n");
1253 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
1254 ioa_cfg->sdt_state = GET_DUMP;
1256 if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd)
1257 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1259 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1260 LEAVE;
1264 * ipr_oper_timeout - Adapter timed out transitioning to operational
1265 * @ipr_cmd: ipr command struct
1267 * This function blocks host requests and initiates an
1268 * adapter reset.
1270 * Return value:
1271 * none
1273 static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd)
1275 unsigned long lock_flags = 0;
1276 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1278 ENTER;
1279 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1281 ioa_cfg->errors_logged++;
1282 dev_err(&ioa_cfg->pdev->dev,
1283 "Adapter timed out transitioning to operational.\n");
1285 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
1286 ioa_cfg->sdt_state = GET_DUMP;
1288 if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) {
1289 if (ipr_fastfail)
1290 ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
1291 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1294 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1295 LEAVE;
1299 * ipr_reset_reload - Reset/Reload the IOA
1300 * @ioa_cfg: ioa config struct
1301 * @shutdown_type: shutdown type
1303 * This function resets the adapter and re-initializes it.
1304 * This function assumes that all new host commands have been stopped.
1305 * Return value:
1306 * SUCCESS / FAILED
1308 static int ipr_reset_reload(struct ipr_ioa_cfg *ioa_cfg,
1309 enum ipr_shutdown_type shutdown_type)
1311 if (!ioa_cfg->in_reset_reload)
1312 ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
1314 spin_unlock_irq(ioa_cfg->host->host_lock);
1315 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
1316 spin_lock_irq(ioa_cfg->host->host_lock);
1318 /* If we got hit with a host reset while we were already resetting
1319 the adapter for some reason, and the reset failed. */
1320 if (ioa_cfg->ioa_is_dead) {
1321 ipr_trace;
1322 return FAILED;
1325 return SUCCESS;
1329 * ipr_find_ses_entry - Find matching SES in SES table
1330 * @res: resource entry struct of SES
1332 * Return value:
1333 * pointer to SES table entry / NULL on failure
1335 static const struct ipr_ses_table_entry *
1336 ipr_find_ses_entry(struct ipr_resource_entry *res)
1338 int i, j, matches;
1339 const struct ipr_ses_table_entry *ste = ipr_ses_table;
1341 for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) {
1342 for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) {
1343 if (ste->compare_product_id_byte[j] == 'X') {
1344 if (res->cfgte.std_inq_data.vpids.product_id[j] == ste->product_id[j])
1345 matches++;
1346 else
1347 break;
1348 } else
1349 matches++;
1352 if (matches == IPR_PROD_ID_LEN)
1353 return ste;
1356 return NULL;
1360 * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus
1361 * @ioa_cfg: ioa config struct
1362 * @bus: SCSI bus
1363 * @bus_width: bus width
1365 * Return value:
1366 * SCSI bus speed in units of 100KHz, 1600 is 160 MHz
1367 * For a 2-byte wide SCSI bus, the maximum transfer speed is
1368 * twice the maximum transfer rate (e.g. for a wide enabled bus,
1369 * max 160MHz = max 320MB/sec).
1371 static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width)
1373 struct ipr_resource_entry *res;
1374 const struct ipr_ses_table_entry *ste;
1375 u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width);
1377 /* Loop through each config table entry in the config table buffer */
1378 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
1379 if (!(IPR_IS_SES_DEVICE(res->cfgte.std_inq_data)))
1380 continue;
1382 if (bus != res->cfgte.res_addr.bus)
1383 continue;
1385 if (!(ste = ipr_find_ses_entry(res)))
1386 continue;
1388 max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8);
1391 return max_xfer_rate;
1395 * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA
1396 * @ioa_cfg: ioa config struct
1397 * @max_delay: max delay in micro-seconds to wait
1399 * Waits for an IODEBUG ACK from the IOA, doing busy looping.
1401 * Return value:
1402 * 0 on success / other on failure
1404 static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay)
1406 volatile u32 pcii_reg;
1407 int delay = 1;
1409 /* Read interrupt reg until IOA signals IO Debug Acknowledge */
1410 while (delay < max_delay) {
1411 pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
1413 if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE)
1414 return 0;
1416 /* udelay cannot be used if delay is more than a few milliseconds */
1417 if ((delay / 1000) > MAX_UDELAY_MS)
1418 mdelay(delay / 1000);
1419 else
1420 udelay(delay);
1422 delay += delay;
1424 return -EIO;
1428 * ipr_get_ldump_data_section - Dump IOA memory
1429 * @ioa_cfg: ioa config struct
1430 * @start_addr: adapter address to dump
1431 * @dest: destination kernel buffer
1432 * @length_in_words: length to dump in 4 byte words
1434 * Return value:
1435 * 0 on success / -EIO on failure
1437 static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
1438 u32 start_addr,
1439 __be32 *dest, u32 length_in_words)
1441 volatile u32 temp_pcii_reg;
1442 int i, delay = 0;
1444 /* Write IOA interrupt reg starting LDUMP state */
1445 writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT),
1446 ioa_cfg->regs.set_uproc_interrupt_reg);
1448 /* Wait for IO debug acknowledge */
1449 if (ipr_wait_iodbg_ack(ioa_cfg,
1450 IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) {
1451 dev_err(&ioa_cfg->pdev->dev,
1452 "IOA dump long data transfer timeout\n");
1453 return -EIO;
1456 /* Signal LDUMP interlocked - clear IO debug ack */
1457 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1458 ioa_cfg->regs.clr_interrupt_reg);
1460 /* Write Mailbox with starting address */
1461 writel(start_addr, ioa_cfg->ioa_mailbox);
1463 /* Signal address valid - clear IOA Reset alert */
1464 writel(IPR_UPROCI_RESET_ALERT,
1465 ioa_cfg->regs.clr_uproc_interrupt_reg);
1467 for (i = 0; i < length_in_words; i++) {
1468 /* Wait for IO debug acknowledge */
1469 if (ipr_wait_iodbg_ack(ioa_cfg,
1470 IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) {
1471 dev_err(&ioa_cfg->pdev->dev,
1472 "IOA dump short data transfer timeout\n");
1473 return -EIO;
1476 /* Read data from mailbox and increment destination pointer */
1477 *dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox));
1478 dest++;
1480 /* For all but the last word of data, signal data received */
1481 if (i < (length_in_words - 1)) {
1482 /* Signal dump data received - Clear IO debug Ack */
1483 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1484 ioa_cfg->regs.clr_interrupt_reg);
1488 /* Signal end of block transfer. Set reset alert then clear IO debug ack */
1489 writel(IPR_UPROCI_RESET_ALERT,
1490 ioa_cfg->regs.set_uproc_interrupt_reg);
1492 writel(IPR_UPROCI_IO_DEBUG_ALERT,
1493 ioa_cfg->regs.clr_uproc_interrupt_reg);
1495 /* Signal dump data received - Clear IO debug Ack */
1496 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1497 ioa_cfg->regs.clr_interrupt_reg);
1499 /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */
1500 while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) {
1501 temp_pcii_reg =
1502 readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
1504 if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT))
1505 return 0;
1507 udelay(10);
1508 delay += 10;
1511 return 0;
1514 #ifdef CONFIG_SCSI_IPR_DUMP
1516 * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer
1517 * @ioa_cfg: ioa config struct
1518 * @pci_address: adapter address
1519 * @length: length of data to copy
1521 * Copy data from PCI adapter to kernel buffer.
1522 * Note: length MUST be a 4 byte multiple
1523 * Return value:
1524 * 0 on success / other on failure
1526 static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg,
1527 unsigned long pci_address, u32 length)
1529 int bytes_copied = 0;
1530 int cur_len, rc, rem_len, rem_page_len;
1531 __be32 *page;
1532 unsigned long lock_flags = 0;
1533 struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump;
1535 while (bytes_copied < length &&
1536 (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) {
1537 if (ioa_dump->page_offset >= PAGE_SIZE ||
1538 ioa_dump->page_offset == 0) {
1539 page = (__be32 *)__get_free_page(GFP_ATOMIC);
1541 if (!page) {
1542 ipr_trace;
1543 return bytes_copied;
1546 ioa_dump->page_offset = 0;
1547 ioa_dump->ioa_data[ioa_dump->next_page_index] = page;
1548 ioa_dump->next_page_index++;
1549 } else
1550 page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1];
1552 rem_len = length - bytes_copied;
1553 rem_page_len = PAGE_SIZE - ioa_dump->page_offset;
1554 cur_len = min(rem_len, rem_page_len);
1556 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1557 if (ioa_cfg->sdt_state == ABORT_DUMP) {
1558 rc = -EIO;
1559 } else {
1560 rc = ipr_get_ldump_data_section(ioa_cfg,
1561 pci_address + bytes_copied,
1562 &page[ioa_dump->page_offset / 4],
1563 (cur_len / sizeof(u32)));
1565 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1567 if (!rc) {
1568 ioa_dump->page_offset += cur_len;
1569 bytes_copied += cur_len;
1570 } else {
1571 ipr_trace;
1572 break;
1574 schedule();
1577 return bytes_copied;
1581 * ipr_init_dump_entry_hdr - Initialize a dump entry header.
1582 * @hdr: dump entry header struct
1584 * Return value:
1585 * nothing
1587 static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr)
1589 hdr->eye_catcher = IPR_DUMP_EYE_CATCHER;
1590 hdr->num_elems = 1;
1591 hdr->offset = sizeof(*hdr);
1592 hdr->status = IPR_DUMP_STATUS_SUCCESS;
1596 * ipr_dump_ioa_type_data - Fill in the adapter type in the dump.
1597 * @ioa_cfg: ioa config struct
1598 * @driver_dump: driver dump struct
1600 * Return value:
1601 * nothing
1603 static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg,
1604 struct ipr_driver_dump *driver_dump)
1606 struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
1608 ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr);
1609 driver_dump->ioa_type_entry.hdr.len =
1610 sizeof(struct ipr_dump_ioa_type_entry) -
1611 sizeof(struct ipr_dump_entry_header);
1612 driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
1613 driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID;
1614 driver_dump->ioa_type_entry.type = ioa_cfg->type;
1615 driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) |
1616 (ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) |
1617 ucode_vpd->minor_release[1];
1618 driver_dump->hdr.num_entries++;
1622 * ipr_dump_version_data - Fill in the driver version in the dump.
1623 * @ioa_cfg: ioa config struct
1624 * @driver_dump: driver dump struct
1626 * Return value:
1627 * nothing
1629 static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg,
1630 struct ipr_driver_dump *driver_dump)
1632 ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr);
1633 driver_dump->version_entry.hdr.len =
1634 sizeof(struct ipr_dump_version_entry) -
1635 sizeof(struct ipr_dump_entry_header);
1636 driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
1637 driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID;
1638 strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION);
1639 driver_dump->hdr.num_entries++;
1643 * ipr_dump_trace_data - Fill in the IOA trace in the dump.
1644 * @ioa_cfg: ioa config struct
1645 * @driver_dump: driver dump struct
1647 * Return value:
1648 * nothing
1650 static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg,
1651 struct ipr_driver_dump *driver_dump)
1653 ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr);
1654 driver_dump->trace_entry.hdr.len =
1655 sizeof(struct ipr_dump_trace_entry) -
1656 sizeof(struct ipr_dump_entry_header);
1657 driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
1658 driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID;
1659 memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE);
1660 driver_dump->hdr.num_entries++;
1664 * ipr_dump_location_data - Fill in the IOA location in the dump.
1665 * @ioa_cfg: ioa config struct
1666 * @driver_dump: driver dump struct
1668 * Return value:
1669 * nothing
1671 static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg,
1672 struct ipr_driver_dump *driver_dump)
1674 ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr);
1675 driver_dump->location_entry.hdr.len =
1676 sizeof(struct ipr_dump_location_entry) -
1677 sizeof(struct ipr_dump_entry_header);
1678 driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
1679 driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID;
1680 strcpy(driver_dump->location_entry.location, ioa_cfg->pdev->dev.bus_id);
1681 driver_dump->hdr.num_entries++;
1685 * ipr_get_ioa_dump - Perform a dump of the driver and adapter.
1686 * @ioa_cfg: ioa config struct
1687 * @dump: dump struct
1689 * Return value:
1690 * nothing
1692 static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
1694 unsigned long start_addr, sdt_word;
1695 unsigned long lock_flags = 0;
1696 struct ipr_driver_dump *driver_dump = &dump->driver_dump;
1697 struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump;
1698 u32 num_entries, start_off, end_off;
1699 u32 bytes_to_copy, bytes_copied, rc;
1700 struct ipr_sdt *sdt;
1701 int i;
1703 ENTER;
1705 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1707 if (ioa_cfg->sdt_state != GET_DUMP) {
1708 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1709 return;
1712 start_addr = readl(ioa_cfg->ioa_mailbox);
1714 if (!ipr_sdt_is_fmt2(start_addr)) {
1715 dev_err(&ioa_cfg->pdev->dev,
1716 "Invalid dump table format: %lx\n", start_addr);
1717 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1718 return;
1721 dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n");
1723 driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER;
1725 /* Initialize the overall dump header */
1726 driver_dump->hdr.len = sizeof(struct ipr_driver_dump);
1727 driver_dump->hdr.num_entries = 1;
1728 driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header);
1729 driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS;
1730 driver_dump->hdr.os = IPR_DUMP_OS_LINUX;
1731 driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME;
1733 ipr_dump_version_data(ioa_cfg, driver_dump);
1734 ipr_dump_location_data(ioa_cfg, driver_dump);
1735 ipr_dump_ioa_type_data(ioa_cfg, driver_dump);
1736 ipr_dump_trace_data(ioa_cfg, driver_dump);
1738 /* Update dump_header */
1739 driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header);
1741 /* IOA Dump entry */
1742 ipr_init_dump_entry_hdr(&ioa_dump->hdr);
1743 ioa_dump->format = IPR_SDT_FMT2;
1744 ioa_dump->hdr.len = 0;
1745 ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
1746 ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID;
1748 /* First entries in sdt are actually a list of dump addresses and
1749 lengths to gather the real dump data. sdt represents the pointer
1750 to the ioa generated dump table. Dump data will be extracted based
1751 on entries in this table */
1752 sdt = &ioa_dump->sdt;
1754 rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt,
1755 sizeof(struct ipr_sdt) / sizeof(__be32));
1757 /* Smart Dump table is ready to use and the first entry is valid */
1758 if (rc || (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE)) {
1759 dev_err(&ioa_cfg->pdev->dev,
1760 "Dump of IOA failed. Dump table not valid: %d, %X.\n",
1761 rc, be32_to_cpu(sdt->hdr.state));
1762 driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED;
1763 ioa_cfg->sdt_state = DUMP_OBTAINED;
1764 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1765 return;
1768 num_entries = be32_to_cpu(sdt->hdr.num_entries_used);
1770 if (num_entries > IPR_NUM_SDT_ENTRIES)
1771 num_entries = IPR_NUM_SDT_ENTRIES;
1773 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1775 for (i = 0; i < num_entries; i++) {
1776 if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) {
1777 driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
1778 break;
1781 if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) {
1782 sdt_word = be32_to_cpu(sdt->entry[i].bar_str_offset);
1783 start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK;
1784 end_off = be32_to_cpu(sdt->entry[i].end_offset);
1786 if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) {
1787 bytes_to_copy = end_off - start_off;
1788 if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
1789 sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
1790 continue;
1793 /* Copy data from adapter to driver buffers */
1794 bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word,
1795 bytes_to_copy);
1797 ioa_dump->hdr.len += bytes_copied;
1799 if (bytes_copied != bytes_to_copy) {
1800 driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
1801 break;
1807 dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n");
1809 /* Update dump_header */
1810 driver_dump->hdr.len += ioa_dump->hdr.len;
1811 wmb();
1812 ioa_cfg->sdt_state = DUMP_OBTAINED;
1813 LEAVE;
1816 #else
1817 #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0)
1818 #endif
1821 * ipr_release_dump - Free adapter dump memory
1822 * @kref: kref struct
1824 * Return value:
1825 * nothing
1827 static void ipr_release_dump(struct kref *kref)
1829 struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref);
1830 struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg;
1831 unsigned long lock_flags = 0;
1832 int i;
1834 ENTER;
1835 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1836 ioa_cfg->dump = NULL;
1837 ioa_cfg->sdt_state = INACTIVE;
1838 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1840 for (i = 0; i < dump->ioa_dump.next_page_index; i++)
1841 free_page((unsigned long) dump->ioa_dump.ioa_data[i]);
1843 kfree(dump);
1844 LEAVE;
1848 * ipr_worker_thread - Worker thread
1849 * @data: ioa config struct
1851 * Called at task level from a work thread. This function takes care
1852 * of adding and removing device from the mid-layer as configuration
1853 * changes are detected by the adapter.
1855 * Return value:
1856 * nothing
1858 static void ipr_worker_thread(void *data)
1860 unsigned long lock_flags;
1861 struct ipr_resource_entry *res;
1862 struct scsi_device *sdev;
1863 struct ipr_dump *dump;
1864 struct ipr_ioa_cfg *ioa_cfg = data;
1865 u8 bus, target, lun;
1866 int did_work;
1868 ENTER;
1869 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1871 if (ioa_cfg->sdt_state == GET_DUMP) {
1872 dump = ioa_cfg->dump;
1873 if (!dump) {
1874 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1875 return;
1877 kref_get(&dump->kref);
1878 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1879 ipr_get_ioa_dump(ioa_cfg, dump);
1880 kref_put(&dump->kref, ipr_release_dump);
1882 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1883 if (ioa_cfg->sdt_state == DUMP_OBTAINED)
1884 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1885 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1886 return;
1889 restart:
1890 do {
1891 did_work = 0;
1892 if (!ioa_cfg->allow_cmds || !ioa_cfg->allow_ml_add_del) {
1893 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1894 return;
1897 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
1898 if (res->del_from_ml && res->sdev) {
1899 did_work = 1;
1900 sdev = res->sdev;
1901 if (!scsi_device_get(sdev)) {
1902 res->sdev = NULL;
1903 list_move_tail(&res->queue, &ioa_cfg->free_res_q);
1904 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1905 scsi_remove_device(sdev);
1906 scsi_device_put(sdev);
1907 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1909 break;
1912 } while(did_work);
1914 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
1915 if (res->add_to_ml) {
1916 bus = res->cfgte.res_addr.bus;
1917 target = res->cfgte.res_addr.target;
1918 lun = res->cfgte.res_addr.lun;
1919 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1920 scsi_add_device(ioa_cfg->host, bus, target, lun);
1921 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1922 goto restart;
1926 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1927 kobject_uevent(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE, NULL);
1928 LEAVE;
1931 #ifdef CONFIG_SCSI_IPR_TRACE
1933 * ipr_read_trace - Dump the adapter trace
1934 * @kobj: kobject struct
1935 * @buf: buffer
1936 * @off: offset
1937 * @count: buffer size
1939 * Return value:
1940 * number of bytes printed to buffer
1942 static ssize_t ipr_read_trace(struct kobject *kobj, char *buf,
1943 loff_t off, size_t count)
1945 struct class_device *cdev = container_of(kobj,struct class_device,kobj);
1946 struct Scsi_Host *shost = class_to_shost(cdev);
1947 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
1948 unsigned long lock_flags = 0;
1949 int size = IPR_TRACE_SIZE;
1950 char *src = (char *)ioa_cfg->trace;
1952 if (off > size)
1953 return 0;
1954 if (off + count > size) {
1955 size -= off;
1956 count = size;
1959 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1960 memcpy(buf, &src[off], count);
1961 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1962 return count;
1965 static struct bin_attribute ipr_trace_attr = {
1966 .attr = {
1967 .name = "trace",
1968 .mode = S_IRUGO,
1970 .size = 0,
1971 .read = ipr_read_trace,
1973 #endif
1976 * ipr_show_fw_version - Show the firmware version
1977 * @class_dev: class device struct
1978 * @buf: buffer
1980 * Return value:
1981 * number of bytes printed to buffer
1983 static ssize_t ipr_show_fw_version(struct class_device *class_dev, char *buf)
1985 struct Scsi_Host *shost = class_to_shost(class_dev);
1986 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
1987 struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
1988 unsigned long lock_flags = 0;
1989 int len;
1991 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1992 len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n",
1993 ucode_vpd->major_release, ucode_vpd->card_type,
1994 ucode_vpd->minor_release[0],
1995 ucode_vpd->minor_release[1]);
1996 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1997 return len;
2000 static struct class_device_attribute ipr_fw_version_attr = {
2001 .attr = {
2002 .name = "fw_version",
2003 .mode = S_IRUGO,
2005 .show = ipr_show_fw_version,
2009 * ipr_show_log_level - Show the adapter's error logging level
2010 * @class_dev: class device struct
2011 * @buf: buffer
2013 * Return value:
2014 * number of bytes printed to buffer
2016 static ssize_t ipr_show_log_level(struct class_device *class_dev, char *buf)
2018 struct Scsi_Host *shost = class_to_shost(class_dev);
2019 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2020 unsigned long lock_flags = 0;
2021 int len;
2023 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2024 len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level);
2025 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2026 return len;
2030 * ipr_store_log_level - Change the adapter's error logging level
2031 * @class_dev: class device struct
2032 * @buf: buffer
2034 * Return value:
2035 * number of bytes printed to buffer
2037 static ssize_t ipr_store_log_level(struct class_device *class_dev,
2038 const char *buf, size_t count)
2040 struct Scsi_Host *shost = class_to_shost(class_dev);
2041 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2042 unsigned long lock_flags = 0;
2044 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2045 ioa_cfg->log_level = simple_strtoul(buf, NULL, 10);
2046 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2047 return strlen(buf);
2050 static struct class_device_attribute ipr_log_level_attr = {
2051 .attr = {
2052 .name = "log_level",
2053 .mode = S_IRUGO | S_IWUSR,
2055 .show = ipr_show_log_level,
2056 .store = ipr_store_log_level
2060 * ipr_store_diagnostics - IOA Diagnostics interface
2061 * @class_dev: class_device struct
2062 * @buf: buffer
2063 * @count: buffer size
2065 * This function will reset the adapter and wait a reasonable
2066 * amount of time for any errors that the adapter might log.
2068 * Return value:
2069 * count on success / other on failure
2071 static ssize_t ipr_store_diagnostics(struct class_device *class_dev,
2072 const char *buf, size_t count)
2074 struct Scsi_Host *shost = class_to_shost(class_dev);
2075 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2076 unsigned long lock_flags = 0;
2077 int rc = count;
2079 if (!capable(CAP_SYS_ADMIN))
2080 return -EACCES;
2082 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2083 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2084 ioa_cfg->errors_logged = 0;
2085 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2087 if (ioa_cfg->in_reset_reload) {
2088 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2089 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2091 /* Wait for a second for any errors to be logged */
2092 msleep(1000);
2093 } else {
2094 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2095 return -EIO;
2098 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2099 if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged)
2100 rc = -EIO;
2101 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2103 return rc;
2106 static struct class_device_attribute ipr_diagnostics_attr = {
2107 .attr = {
2108 .name = "run_diagnostics",
2109 .mode = S_IWUSR,
2111 .store = ipr_store_diagnostics
2115 * ipr_store_reset_adapter - Reset the adapter
2116 * @class_dev: class_device struct
2117 * @buf: buffer
2118 * @count: buffer size
2120 * This function will reset the adapter.
2122 * Return value:
2123 * count on success / other on failure
2125 static ssize_t ipr_store_reset_adapter(struct class_device *class_dev,
2126 const char *buf, size_t count)
2128 struct Scsi_Host *shost = class_to_shost(class_dev);
2129 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2130 unsigned long lock_flags;
2131 int result = count;
2133 if (!capable(CAP_SYS_ADMIN))
2134 return -EACCES;
2136 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2137 if (!ioa_cfg->in_reset_reload)
2138 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2139 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2140 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2142 return result;
2145 static struct class_device_attribute ipr_ioa_reset_attr = {
2146 .attr = {
2147 .name = "reset_host",
2148 .mode = S_IWUSR,
2150 .store = ipr_store_reset_adapter
2154 * ipr_alloc_ucode_buffer - Allocates a microcode download buffer
2155 * @buf_len: buffer length
2157 * Allocates a DMA'able buffer in chunks and assembles a scatter/gather
2158 * list to use for microcode download
2160 * Return value:
2161 * pointer to sglist / NULL on failure
2163 static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
2165 int sg_size, order, bsize_elem, num_elem, i, j;
2166 struct ipr_sglist *sglist;
2167 struct scatterlist *scatterlist;
2168 struct page *page;
2170 /* Get the minimum size per scatter/gather element */
2171 sg_size = buf_len / (IPR_MAX_SGLIST - 1);
2173 /* Get the actual size per element */
2174 order = get_order(sg_size);
2176 /* Determine the actual number of bytes per element */
2177 bsize_elem = PAGE_SIZE * (1 << order);
2179 /* Determine the actual number of sg entries needed */
2180 if (buf_len % bsize_elem)
2181 num_elem = (buf_len / bsize_elem) + 1;
2182 else
2183 num_elem = buf_len / bsize_elem;
2185 /* Allocate a scatter/gather list for the DMA */
2186 sglist = kmalloc(sizeof(struct ipr_sglist) +
2187 (sizeof(struct scatterlist) * (num_elem - 1)),
2188 GFP_KERNEL);
2190 if (sglist == NULL) {
2191 ipr_trace;
2192 return NULL;
2195 memset(sglist, 0, sizeof(struct ipr_sglist) +
2196 (sizeof(struct scatterlist) * (num_elem - 1)));
2198 scatterlist = sglist->scatterlist;
2200 sglist->order = order;
2201 sglist->num_sg = num_elem;
2203 /* Allocate a bunch of sg elements */
2204 for (i = 0; i < num_elem; i++) {
2205 page = alloc_pages(GFP_KERNEL, order);
2206 if (!page) {
2207 ipr_trace;
2209 /* Free up what we already allocated */
2210 for (j = i - 1; j >= 0; j--)
2211 __free_pages(scatterlist[j].page, order);
2212 kfree(sglist);
2213 return NULL;
2216 scatterlist[i].page = page;
2219 return sglist;
2223 * ipr_free_ucode_buffer - Frees a microcode download buffer
2224 * @p_dnld: scatter/gather list pointer
2226 * Free a DMA'able ucode download buffer previously allocated with
2227 * ipr_alloc_ucode_buffer
2229 * Return value:
2230 * nothing
2232 static void ipr_free_ucode_buffer(struct ipr_sglist *sglist)
2234 int i;
2236 for (i = 0; i < sglist->num_sg; i++)
2237 __free_pages(sglist->scatterlist[i].page, sglist->order);
2239 kfree(sglist);
2243 * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer
2244 * @sglist: scatter/gather list pointer
2245 * @buffer: buffer pointer
2246 * @len: buffer length
2248 * Copy a microcode image from a user buffer into a buffer allocated by
2249 * ipr_alloc_ucode_buffer
2251 * Return value:
2252 * 0 on success / other on failure
2254 static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist,
2255 u8 *buffer, u32 len)
2257 int bsize_elem, i, result = 0;
2258 struct scatterlist *scatterlist;
2259 void *kaddr;
2261 /* Determine the actual number of bytes per element */
2262 bsize_elem = PAGE_SIZE * (1 << sglist->order);
2264 scatterlist = sglist->scatterlist;
2266 for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) {
2267 kaddr = kmap(scatterlist[i].page);
2268 memcpy(kaddr, buffer, bsize_elem);
2269 kunmap(scatterlist[i].page);
2271 scatterlist[i].length = bsize_elem;
2273 if (result != 0) {
2274 ipr_trace;
2275 return result;
2279 if (len % bsize_elem) {
2280 kaddr = kmap(scatterlist[i].page);
2281 memcpy(kaddr, buffer, len % bsize_elem);
2282 kunmap(scatterlist[i].page);
2284 scatterlist[i].length = len % bsize_elem;
2287 sglist->buffer_len = len;
2288 return result;
2292 * ipr_map_ucode_buffer - Map a microcode download buffer
2293 * @ipr_cmd: ipr command struct
2294 * @sglist: scatter/gather list
2295 * @len: total length of download buffer
2297 * Maps a microcode download scatter/gather list for DMA and
2298 * builds the IOADL.
2300 * Return value:
2301 * 0 on success / -EIO on failure
2303 static int ipr_map_ucode_buffer(struct ipr_cmnd *ipr_cmd,
2304 struct ipr_sglist *sglist, int len)
2306 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
2307 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
2308 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
2309 struct scatterlist *scatterlist = sglist->scatterlist;
2310 int i;
2312 ipr_cmd->dma_use_sg = pci_map_sg(ioa_cfg->pdev, scatterlist,
2313 sglist->num_sg, DMA_TO_DEVICE);
2315 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
2316 ioarcb->write_data_transfer_length = cpu_to_be32(len);
2317 ioarcb->write_ioadl_len =
2318 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
2320 for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
2321 ioadl[i].flags_and_data_len =
2322 cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i]));
2323 ioadl[i].address =
2324 cpu_to_be32(sg_dma_address(&scatterlist[i]));
2327 if (likely(ipr_cmd->dma_use_sg)) {
2328 ioadl[i-1].flags_and_data_len |=
2329 cpu_to_be32(IPR_IOADL_FLAGS_LAST);
2331 else {
2332 dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
2333 return -EIO;
2336 return 0;
2340 * ipr_store_update_fw - Update the firmware on the adapter
2341 * @class_dev: class_device struct
2342 * @buf: buffer
2343 * @count: buffer size
2345 * This function will update the firmware on the adapter.
2347 * Return value:
2348 * count on success / other on failure
2350 static ssize_t ipr_store_update_fw(struct class_device *class_dev,
2351 const char *buf, size_t count)
2353 struct Scsi_Host *shost = class_to_shost(class_dev);
2354 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2355 struct ipr_ucode_image_header *image_hdr;
2356 const struct firmware *fw_entry;
2357 struct ipr_sglist *sglist;
2358 unsigned long lock_flags;
2359 char fname[100];
2360 char *src;
2361 int len, result, dnld_size;
2363 if (!capable(CAP_SYS_ADMIN))
2364 return -EACCES;
2366 len = snprintf(fname, 99, "%s", buf);
2367 fname[len-1] = '\0';
2369 if(request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) {
2370 dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname);
2371 return -EIO;
2374 image_hdr = (struct ipr_ucode_image_header *)fw_entry->data;
2376 if (be32_to_cpu(image_hdr->header_length) > fw_entry->size ||
2377 (ioa_cfg->vpd_cbs->page3_data.card_type &&
2378 ioa_cfg->vpd_cbs->page3_data.card_type != image_hdr->card_type)) {
2379 dev_err(&ioa_cfg->pdev->dev, "Invalid microcode buffer\n");
2380 release_firmware(fw_entry);
2381 return -EINVAL;
2384 src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length);
2385 dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length);
2386 sglist = ipr_alloc_ucode_buffer(dnld_size);
2388 if (!sglist) {
2389 dev_err(&ioa_cfg->pdev->dev, "Microcode buffer allocation failed\n");
2390 release_firmware(fw_entry);
2391 return -ENOMEM;
2394 result = ipr_copy_ucode_buffer(sglist, src, dnld_size);
2396 if (result) {
2397 dev_err(&ioa_cfg->pdev->dev,
2398 "Microcode buffer copy to DMA buffer failed\n");
2399 ipr_free_ucode_buffer(sglist);
2400 release_firmware(fw_entry);
2401 return result;
2404 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2406 if (ioa_cfg->ucode_sglist) {
2407 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2408 dev_err(&ioa_cfg->pdev->dev,
2409 "Microcode download already in progress\n");
2410 ipr_free_ucode_buffer(sglist);
2411 release_firmware(fw_entry);
2412 return -EIO;
2415 ioa_cfg->ucode_sglist = sglist;
2416 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2417 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2418 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2420 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2421 ioa_cfg->ucode_sglist = NULL;
2422 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2424 ipr_free_ucode_buffer(sglist);
2425 release_firmware(fw_entry);
2427 return count;
2430 static struct class_device_attribute ipr_update_fw_attr = {
2431 .attr = {
2432 .name = "update_fw",
2433 .mode = S_IWUSR,
2435 .store = ipr_store_update_fw
2438 static struct class_device_attribute *ipr_ioa_attrs[] = {
2439 &ipr_fw_version_attr,
2440 &ipr_log_level_attr,
2441 &ipr_diagnostics_attr,
2442 &ipr_ioa_reset_attr,
2443 &ipr_update_fw_attr,
2444 NULL,
2447 #ifdef CONFIG_SCSI_IPR_DUMP
2449 * ipr_read_dump - Dump the adapter
2450 * @kobj: kobject struct
2451 * @buf: buffer
2452 * @off: offset
2453 * @count: buffer size
2455 * Return value:
2456 * number of bytes printed to buffer
2458 static ssize_t ipr_read_dump(struct kobject *kobj, char *buf,
2459 loff_t off, size_t count)
2461 struct class_device *cdev = container_of(kobj,struct class_device,kobj);
2462 struct Scsi_Host *shost = class_to_shost(cdev);
2463 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2464 struct ipr_dump *dump;
2465 unsigned long lock_flags = 0;
2466 char *src;
2467 int len;
2468 size_t rc = count;
2470 if (!capable(CAP_SYS_ADMIN))
2471 return -EACCES;
2473 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2474 dump = ioa_cfg->dump;
2476 if (ioa_cfg->sdt_state != DUMP_OBTAINED || !dump) {
2477 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2478 return 0;
2480 kref_get(&dump->kref);
2481 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2483 if (off > dump->driver_dump.hdr.len) {
2484 kref_put(&dump->kref, ipr_release_dump);
2485 return 0;
2488 if (off + count > dump->driver_dump.hdr.len) {
2489 count = dump->driver_dump.hdr.len - off;
2490 rc = count;
2493 if (count && off < sizeof(dump->driver_dump)) {
2494 if (off + count > sizeof(dump->driver_dump))
2495 len = sizeof(dump->driver_dump) - off;
2496 else
2497 len = count;
2498 src = (u8 *)&dump->driver_dump + off;
2499 memcpy(buf, src, len);
2500 buf += len;
2501 off += len;
2502 count -= len;
2505 off -= sizeof(dump->driver_dump);
2507 if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) {
2508 if (off + count > offsetof(struct ipr_ioa_dump, ioa_data))
2509 len = offsetof(struct ipr_ioa_dump, ioa_data) - off;
2510 else
2511 len = count;
2512 src = (u8 *)&dump->ioa_dump + off;
2513 memcpy(buf, src, len);
2514 buf += len;
2515 off += len;
2516 count -= len;
2519 off -= offsetof(struct ipr_ioa_dump, ioa_data);
2521 while (count) {
2522 if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK))
2523 len = PAGE_ALIGN(off) - off;
2524 else
2525 len = count;
2526 src = (u8 *)dump->ioa_dump.ioa_data[(off & PAGE_MASK) >> PAGE_SHIFT];
2527 src += off & ~PAGE_MASK;
2528 memcpy(buf, src, len);
2529 buf += len;
2530 off += len;
2531 count -= len;
2534 kref_put(&dump->kref, ipr_release_dump);
2535 return rc;
2539 * ipr_alloc_dump - Prepare for adapter dump
2540 * @ioa_cfg: ioa config struct
2542 * Return value:
2543 * 0 on success / other on failure
2545 static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
2547 struct ipr_dump *dump;
2548 unsigned long lock_flags = 0;
2550 ENTER;
2551 dump = kmalloc(sizeof(struct ipr_dump), GFP_KERNEL);
2553 if (!dump) {
2554 ipr_err("Dump memory allocation failed\n");
2555 return -ENOMEM;
2558 memset(dump, 0, sizeof(struct ipr_dump));
2559 kref_init(&dump->kref);
2560 dump->ioa_cfg = ioa_cfg;
2562 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2564 if (INACTIVE != ioa_cfg->sdt_state) {
2565 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2566 kfree(dump);
2567 return 0;
2570 ioa_cfg->dump = dump;
2571 ioa_cfg->sdt_state = WAIT_FOR_DUMP;
2572 if (ioa_cfg->ioa_is_dead && !ioa_cfg->dump_taken) {
2573 ioa_cfg->dump_taken = 1;
2574 schedule_work(&ioa_cfg->work_q);
2576 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2578 LEAVE;
2579 return 0;
2583 * ipr_free_dump - Free adapter dump memory
2584 * @ioa_cfg: ioa config struct
2586 * Return value:
2587 * 0 on success / other on failure
2589 static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg)
2591 struct ipr_dump *dump;
2592 unsigned long lock_flags = 0;
2594 ENTER;
2596 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2597 dump = ioa_cfg->dump;
2598 if (!dump) {
2599 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2600 return 0;
2603 ioa_cfg->dump = NULL;
2604 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2606 kref_put(&dump->kref, ipr_release_dump);
2608 LEAVE;
2609 return 0;
2613 * ipr_write_dump - Setup dump state of adapter
2614 * @kobj: kobject struct
2615 * @buf: buffer
2616 * @off: offset
2617 * @count: buffer size
2619 * Return value:
2620 * number of bytes printed to buffer
2622 static ssize_t ipr_write_dump(struct kobject *kobj, char *buf,
2623 loff_t off, size_t count)
2625 struct class_device *cdev = container_of(kobj,struct class_device,kobj);
2626 struct Scsi_Host *shost = class_to_shost(cdev);
2627 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2628 int rc;
2630 if (!capable(CAP_SYS_ADMIN))
2631 return -EACCES;
2633 if (buf[0] == '1')
2634 rc = ipr_alloc_dump(ioa_cfg);
2635 else if (buf[0] == '0')
2636 rc = ipr_free_dump(ioa_cfg);
2637 else
2638 return -EINVAL;
2640 if (rc)
2641 return rc;
2642 else
2643 return count;
2646 static struct bin_attribute ipr_dump_attr = {
2647 .attr = {
2648 .name = "dump",
2649 .mode = S_IRUSR | S_IWUSR,
2651 .size = 0,
2652 .read = ipr_read_dump,
2653 .write = ipr_write_dump
2655 #else
2656 static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; };
2657 #endif
2660 * ipr_change_queue_depth - Change the device's queue depth
2661 * @sdev: scsi device struct
2662 * @qdepth: depth to set
2664 * Return value:
2665 * actual depth set
2667 static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth)
2669 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2670 return sdev->queue_depth;
2674 * ipr_change_queue_type - Change the device's queue type
2675 * @dsev: scsi device struct
2676 * @tag_type: type of tags to use
2678 * Return value:
2679 * actual queue type set
2681 static int ipr_change_queue_type(struct scsi_device *sdev, int tag_type)
2683 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
2684 struct ipr_resource_entry *res;
2685 unsigned long lock_flags = 0;
2687 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2688 res = (struct ipr_resource_entry *)sdev->hostdata;
2690 if (res) {
2691 if (ipr_is_gscsi(res) && sdev->tagged_supported) {
2693 * We don't bother quiescing the device here since the
2694 * adapter firmware does it for us.
2696 scsi_set_tag_type(sdev, tag_type);
2698 if (tag_type)
2699 scsi_activate_tcq(sdev, sdev->queue_depth);
2700 else
2701 scsi_deactivate_tcq(sdev, sdev->queue_depth);
2702 } else
2703 tag_type = 0;
2704 } else
2705 tag_type = 0;
2707 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2708 return tag_type;
2712 * ipr_show_adapter_handle - Show the adapter's resource handle for this device
2713 * @dev: device struct
2714 * @buf: buffer
2716 * Return value:
2717 * number of bytes printed to buffer
2719 static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribute *attr, char *buf)
2721 struct scsi_device *sdev = to_scsi_device(dev);
2722 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
2723 struct ipr_resource_entry *res;
2724 unsigned long lock_flags = 0;
2725 ssize_t len = -ENXIO;
2727 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2728 res = (struct ipr_resource_entry *)sdev->hostdata;
2729 if (res)
2730 len = snprintf(buf, PAGE_SIZE, "%08X\n", res->cfgte.res_handle);
2731 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2732 return len;
2735 static struct device_attribute ipr_adapter_handle_attr = {
2736 .attr = {
2737 .name = "adapter_handle",
2738 .mode = S_IRUSR,
2740 .show = ipr_show_adapter_handle
2743 static struct device_attribute *ipr_dev_attrs[] = {
2744 &ipr_adapter_handle_attr,
2745 NULL,
2749 * ipr_biosparam - Return the HSC mapping
2750 * @sdev: scsi device struct
2751 * @block_device: block device pointer
2752 * @capacity: capacity of the device
2753 * @parm: Array containing returned HSC values.
2755 * This function generates the HSC parms that fdisk uses.
2756 * We want to make sure we return something that places partitions
2757 * on 4k boundaries for best performance with the IOA.
2759 * Return value:
2760 * 0 on success
2762 static int ipr_biosparam(struct scsi_device *sdev,
2763 struct block_device *block_device,
2764 sector_t capacity, int *parm)
2766 int heads, sectors;
2767 sector_t cylinders;
2769 heads = 128;
2770 sectors = 32;
2772 cylinders = capacity;
2773 sector_div(cylinders, (128 * 32));
2775 /* return result */
2776 parm[0] = heads;
2777 parm[1] = sectors;
2778 parm[2] = cylinders;
2780 return 0;
2784 * ipr_slave_destroy - Unconfigure a SCSI device
2785 * @sdev: scsi device struct
2787 * Return value:
2788 * nothing
2790 static void ipr_slave_destroy(struct scsi_device *sdev)
2792 struct ipr_resource_entry *res;
2793 struct ipr_ioa_cfg *ioa_cfg;
2794 unsigned long lock_flags = 0;
2796 ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
2798 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2799 res = (struct ipr_resource_entry *) sdev->hostdata;
2800 if (res) {
2801 sdev->hostdata = NULL;
2802 res->sdev = NULL;
2804 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2808 * ipr_slave_configure - Configure a SCSI device
2809 * @sdev: scsi device struct
2811 * This function configures the specified scsi device.
2813 * Return value:
2814 * 0 on success
2816 static int ipr_slave_configure(struct scsi_device *sdev)
2818 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
2819 struct ipr_resource_entry *res;
2820 unsigned long lock_flags = 0;
2822 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2823 res = sdev->hostdata;
2824 if (res) {
2825 if (ipr_is_af_dasd_device(res))
2826 sdev->type = TYPE_RAID;
2827 if (ipr_is_af_dasd_device(res) || ipr_is_ioa_resource(res))
2828 sdev->scsi_level = 4;
2829 if (ipr_is_vset_device(res)) {
2830 sdev->timeout = IPR_VSET_RW_TIMEOUT;
2831 blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
2833 if (IPR_IS_DASD_DEVICE(res->cfgte.std_inq_data))
2834 sdev->allow_restart = 1;
2835 scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
2837 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2838 return 0;
2842 * ipr_slave_alloc - Prepare for commands to a device.
2843 * @sdev: scsi device struct
2845 * This function saves a pointer to the resource entry
2846 * in the scsi device struct if the device exists. We
2847 * can then use this pointer in ipr_queuecommand when
2848 * handling new commands.
2850 * Return value:
2851 * 0 on success
2853 static int ipr_slave_alloc(struct scsi_device *sdev)
2855 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
2856 struct ipr_resource_entry *res;
2857 unsigned long lock_flags;
2859 sdev->hostdata = NULL;
2861 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2863 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
2864 if ((res->cfgte.res_addr.bus == sdev->channel) &&
2865 (res->cfgte.res_addr.target == sdev->id) &&
2866 (res->cfgte.res_addr.lun == sdev->lun)) {
2867 res->sdev = sdev;
2868 res->add_to_ml = 0;
2869 res->in_erp = 0;
2870 sdev->hostdata = res;
2871 res->needs_sync_complete = 1;
2872 break;
2876 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2878 return 0;
2882 * ipr_eh_host_reset - Reset the host adapter
2883 * @scsi_cmd: scsi command struct
2885 * Return value:
2886 * SUCCESS / FAILED
2888 static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
2890 struct ipr_ioa_cfg *ioa_cfg;
2891 int rc;
2893 ENTER;
2894 ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
2896 dev_err(&ioa_cfg->pdev->dev,
2897 "Adapter being reset as a result of error recovery.\n");
2899 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
2900 ioa_cfg->sdt_state = GET_DUMP;
2902 rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
2904 LEAVE;
2905 return rc;
2908 static int ipr_eh_host_reset(struct scsi_cmnd * cmd)
2910 int rc;
2912 spin_lock_irq(cmd->device->host->host_lock);
2913 rc = __ipr_eh_host_reset(cmd);
2914 spin_unlock_irq(cmd->device->host->host_lock);
2916 return rc;
2920 * ipr_eh_dev_reset - Reset the device
2921 * @scsi_cmd: scsi command struct
2923 * This function issues a device reset to the affected device.
2924 * A LUN reset will be sent to the device first. If that does
2925 * not work, a target reset will be sent.
2927 * Return value:
2928 * SUCCESS / FAILED
2930 static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
2932 struct ipr_cmnd *ipr_cmd;
2933 struct ipr_ioa_cfg *ioa_cfg;
2934 struct ipr_resource_entry *res;
2935 struct ipr_cmd_pkt *cmd_pkt;
2936 u32 ioasc;
2938 ENTER;
2939 ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
2940 res = scsi_cmd->device->hostdata;
2942 if (!res || (!ipr_is_gscsi(res) && !ipr_is_vset_device(res)))
2943 return FAILED;
2946 * If we are currently going through reset/reload, return failed. This will force the
2947 * mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the
2948 * reset to complete
2950 if (ioa_cfg->in_reset_reload)
2951 return FAILED;
2952 if (ioa_cfg->ioa_is_dead)
2953 return FAILED;
2955 list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
2956 if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
2957 if (ipr_cmd->scsi_cmd)
2958 ipr_cmd->done = ipr_scsi_eh_done;
2962 res->resetting_device = 1;
2964 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
2966 ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
2967 cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
2968 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
2969 cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
2971 ipr_sdev_err(scsi_cmd->device, "Resetting device\n");
2972 ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
2974 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
2976 res->resetting_device = 0;
2978 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
2980 LEAVE;
2981 return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
2984 static int ipr_eh_dev_reset(struct scsi_cmnd * cmd)
2986 int rc;
2988 spin_lock_irq(cmd->device->host->host_lock);
2989 rc = __ipr_eh_dev_reset(cmd);
2990 spin_unlock_irq(cmd->device->host->host_lock);
2992 return rc;
2996 * ipr_bus_reset_done - Op done function for bus reset.
2997 * @ipr_cmd: ipr command struct
2999 * This function is the op done function for a bus reset
3001 * Return value:
3002 * none
3004 static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd)
3006 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3007 struct ipr_resource_entry *res;
3009 ENTER;
3010 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3011 if (!memcmp(&res->cfgte.res_handle, &ipr_cmd->ioarcb.res_handle,
3012 sizeof(res->cfgte.res_handle))) {
3013 scsi_report_bus_reset(ioa_cfg->host, res->cfgte.res_addr.bus);
3014 break;
3019 * If abort has not completed, indicate the reset has, else call the
3020 * abort's done function to wake the sleeping eh thread
3022 if (ipr_cmd->sibling->sibling)
3023 ipr_cmd->sibling->sibling = NULL;
3024 else
3025 ipr_cmd->sibling->done(ipr_cmd->sibling);
3027 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3028 LEAVE;
3032 * ipr_abort_timeout - An abort task has timed out
3033 * @ipr_cmd: ipr command struct
3035 * This function handles when an abort task times out. If this
3036 * happens we issue a bus reset since we have resources tied
3037 * up that must be freed before returning to the midlayer.
3039 * Return value:
3040 * none
3042 static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd)
3044 struct ipr_cmnd *reset_cmd;
3045 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3046 struct ipr_cmd_pkt *cmd_pkt;
3047 unsigned long lock_flags = 0;
3049 ENTER;
3050 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3051 if (ipr_cmd->completion.done || ioa_cfg->in_reset_reload) {
3052 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3053 return;
3056 ipr_sdev_err(ipr_cmd->u.sdev, "Abort timed out. Resetting bus\n");
3057 reset_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3058 ipr_cmd->sibling = reset_cmd;
3059 reset_cmd->sibling = ipr_cmd;
3060 reset_cmd->ioarcb.res_handle = ipr_cmd->ioarcb.res_handle;
3061 cmd_pkt = &reset_cmd->ioarcb.cmd_pkt;
3062 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3063 cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
3064 cmd_pkt->cdb[2] = IPR_RESET_TYPE_SELECT | IPR_BUS_RESET;
3066 ipr_do_req(reset_cmd, ipr_bus_reset_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
3067 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3068 LEAVE;
3072 * ipr_cancel_op - Cancel specified op
3073 * @scsi_cmd: scsi command struct
3075 * This function cancels specified op.
3077 * Return value:
3078 * SUCCESS / FAILED
3080 static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
3082 struct ipr_cmnd *ipr_cmd;
3083 struct ipr_ioa_cfg *ioa_cfg;
3084 struct ipr_resource_entry *res;
3085 struct ipr_cmd_pkt *cmd_pkt;
3086 u32 ioasc;
3087 int op_found = 0;
3089 ENTER;
3090 ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
3091 res = scsi_cmd->device->hostdata;
3093 /* If we are currently going through reset/reload, return failed.
3094 * This will force the mid-layer to call ipr_eh_host_reset,
3095 * which will then go to sleep and wait for the reset to complete
3097 if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
3098 return FAILED;
3099 if (!res || (!ipr_is_gscsi(res) && !ipr_is_vset_device(res)))
3100 return FAILED;
3102 list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
3103 if (ipr_cmd->scsi_cmd == scsi_cmd) {
3104 ipr_cmd->done = ipr_scsi_eh_done;
3105 op_found = 1;
3106 break;
3110 if (!op_found)
3111 return SUCCESS;
3113 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3114 ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
3115 cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
3116 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3117 cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
3118 ipr_cmd->u.sdev = scsi_cmd->device;
3120 ipr_sdev_err(scsi_cmd->device, "Aborting command: %02X\n", scsi_cmd->cmnd[0]);
3121 ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT);
3122 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3125 * If the abort task timed out and we sent a bus reset, we will get
3126 * one the following responses to the abort
3128 if (ioasc == IPR_IOASC_BUS_WAS_RESET || ioasc == IPR_IOASC_SYNC_REQUIRED) {
3129 ioasc = 0;
3130 ipr_trace;
3133 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3134 res->needs_sync_complete = 1;
3136 LEAVE;
3137 return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
3141 * ipr_eh_abort - Abort a single op
3142 * @scsi_cmd: scsi command struct
3144 * Return value:
3145 * SUCCESS / FAILED
3147 static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd)
3149 unsigned long flags;
3150 int rc;
3152 ENTER;
3154 spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
3155 rc = ipr_cancel_op(scsi_cmd);
3156 spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
3158 LEAVE;
3159 return rc;
3163 * ipr_handle_other_interrupt - Handle "other" interrupts
3164 * @ioa_cfg: ioa config struct
3165 * @int_reg: interrupt register
3167 * Return value:
3168 * IRQ_NONE / IRQ_HANDLED
3170 static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
3171 volatile u32 int_reg)
3173 irqreturn_t rc = IRQ_HANDLED;
3175 if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
3176 /* Mask the interrupt */
3177 writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.set_interrupt_mask_reg);
3179 /* Clear the interrupt */
3180 writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.clr_interrupt_reg);
3181 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
3183 list_del(&ioa_cfg->reset_cmd->queue);
3184 del_timer(&ioa_cfg->reset_cmd->timer);
3185 ipr_reset_ioa_job(ioa_cfg->reset_cmd);
3186 } else {
3187 if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
3188 ioa_cfg->ioa_unit_checked = 1;
3189 else
3190 dev_err(&ioa_cfg->pdev->dev,
3191 "Permanent IOA failure. 0x%08X\n", int_reg);
3193 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
3194 ioa_cfg->sdt_state = GET_DUMP;
3196 ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
3197 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
3200 return rc;
3204 * ipr_isr - Interrupt service routine
3205 * @irq: irq number
3206 * @devp: pointer to ioa config struct
3207 * @regs: pt_regs struct
3209 * Return value:
3210 * IRQ_NONE / IRQ_HANDLED
3212 static irqreturn_t ipr_isr(int irq, void *devp, struct pt_regs *regs)
3214 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
3215 unsigned long lock_flags = 0;
3216 volatile u32 int_reg, int_mask_reg;
3217 u32 ioasc;
3218 u16 cmd_index;
3219 struct ipr_cmnd *ipr_cmd;
3220 irqreturn_t rc = IRQ_NONE;
3222 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3224 /* If interrupts are disabled, ignore the interrupt */
3225 if (!ioa_cfg->allow_interrupts) {
3226 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3227 return IRQ_NONE;
3230 int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
3231 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
3233 /* If an interrupt on the adapter did not occur, ignore it */
3234 if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
3235 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3236 return IRQ_NONE;
3239 while (1) {
3240 ipr_cmd = NULL;
3242 while ((be32_to_cpu(*ioa_cfg->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) ==
3243 ioa_cfg->toggle_bit) {
3245 cmd_index = (be32_to_cpu(*ioa_cfg->hrrq_curr) &
3246 IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT;
3248 if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) {
3249 ioa_cfg->errors_logged++;
3250 dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n");
3252 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
3253 ioa_cfg->sdt_state = GET_DUMP;
3255 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
3256 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3257 return IRQ_HANDLED;
3260 ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index];
3262 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3264 ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc);
3266 list_del(&ipr_cmd->queue);
3267 del_timer(&ipr_cmd->timer);
3268 ipr_cmd->done(ipr_cmd);
3270 rc = IRQ_HANDLED;
3272 if (ioa_cfg->hrrq_curr < ioa_cfg->hrrq_end) {
3273 ioa_cfg->hrrq_curr++;
3274 } else {
3275 ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
3276 ioa_cfg->toggle_bit ^= 1u;
3280 if (ipr_cmd != NULL) {
3281 /* Clear the PCI interrupt */
3282 writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
3283 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
3284 } else
3285 break;
3288 if (unlikely(rc == IRQ_NONE))
3289 rc = ipr_handle_other_interrupt(ioa_cfg, int_reg);
3291 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3292 return rc;
3296 * ipr_build_ioadl - Build a scatter/gather list and map the buffer
3297 * @ioa_cfg: ioa config struct
3298 * @ipr_cmd: ipr command struct
3300 * Return value:
3301 * 0 on success / -1 on failure
3303 static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
3304 struct ipr_cmnd *ipr_cmd)
3306 int i;
3307 struct scatterlist *sglist;
3308 u32 length;
3309 u32 ioadl_flags = 0;
3310 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
3311 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
3312 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
3314 length = scsi_cmd->request_bufflen;
3316 if (length == 0)
3317 return 0;
3319 if (scsi_cmd->use_sg) {
3320 ipr_cmd->dma_use_sg = pci_map_sg(ioa_cfg->pdev,
3321 scsi_cmd->request_buffer,
3322 scsi_cmd->use_sg,
3323 scsi_cmd->sc_data_direction);
3325 if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
3326 ioadl_flags = IPR_IOADL_FLAGS_WRITE;
3327 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
3328 ioarcb->write_data_transfer_length = cpu_to_be32(length);
3329 ioarcb->write_ioadl_len =
3330 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
3331 } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
3332 ioadl_flags = IPR_IOADL_FLAGS_READ;
3333 ioarcb->read_data_transfer_length = cpu_to_be32(length);
3334 ioarcb->read_ioadl_len =
3335 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
3338 sglist = scsi_cmd->request_buffer;
3340 for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
3341 ioadl[i].flags_and_data_len =
3342 cpu_to_be32(ioadl_flags | sg_dma_len(&sglist[i]));
3343 ioadl[i].address =
3344 cpu_to_be32(sg_dma_address(&sglist[i]));
3347 if (likely(ipr_cmd->dma_use_sg)) {
3348 ioadl[i-1].flags_and_data_len |=
3349 cpu_to_be32(IPR_IOADL_FLAGS_LAST);
3350 return 0;
3351 } else
3352 dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
3353 } else {
3354 if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
3355 ioadl_flags = IPR_IOADL_FLAGS_WRITE;
3356 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
3357 ioarcb->write_data_transfer_length = cpu_to_be32(length);
3358 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
3359 } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
3360 ioadl_flags = IPR_IOADL_FLAGS_READ;
3361 ioarcb->read_data_transfer_length = cpu_to_be32(length);
3362 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
3365 ipr_cmd->dma_handle = pci_map_single(ioa_cfg->pdev,
3366 scsi_cmd->request_buffer, length,
3367 scsi_cmd->sc_data_direction);
3369 if (likely(!pci_dma_mapping_error(ipr_cmd->dma_handle))) {
3370 ipr_cmd->dma_use_sg = 1;
3371 ioadl[0].flags_and_data_len =
3372 cpu_to_be32(ioadl_flags | length | IPR_IOADL_FLAGS_LAST);
3373 ioadl[0].address = cpu_to_be32(ipr_cmd->dma_handle);
3374 return 0;
3375 } else
3376 dev_err(&ioa_cfg->pdev->dev, "pci_map_single failed!\n");
3379 return -1;
3383 * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes
3384 * @scsi_cmd: scsi command struct
3386 * Return value:
3387 * task attributes
3389 static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd)
3391 u8 tag[2];
3392 u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK;
3394 if (scsi_populate_tag_msg(scsi_cmd, tag)) {
3395 switch (tag[0]) {
3396 case MSG_SIMPLE_TAG:
3397 rc = IPR_FLAGS_LO_SIMPLE_TASK;
3398 break;
3399 case MSG_HEAD_TAG:
3400 rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK;
3401 break;
3402 case MSG_ORDERED_TAG:
3403 rc = IPR_FLAGS_LO_ORDERED_TASK;
3404 break;
3408 return rc;
3412 * ipr_erp_done - Process completion of ERP for a device
3413 * @ipr_cmd: ipr command struct
3415 * This function copies the sense buffer into the scsi_cmd
3416 * struct and pushes the scsi_done function.
3418 * Return value:
3419 * nothing
3421 static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
3423 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
3424 struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
3425 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3426 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3428 if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
3429 scsi_cmd->result |= (DID_ERROR << 16);
3430 ipr_sdev_err(scsi_cmd->device,
3431 "Request Sense failed with IOASC: 0x%08X\n", ioasc);
3432 } else {
3433 memcpy(scsi_cmd->sense_buffer, ipr_cmd->sense_buffer,
3434 SCSI_SENSE_BUFFERSIZE);
3437 if (res) {
3438 res->needs_sync_complete = 1;
3439 res->in_erp = 0;
3441 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
3442 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3443 scsi_cmd->scsi_done(scsi_cmd);
3447 * ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP
3448 * @ipr_cmd: ipr command struct
3450 * Return value:
3451 * none
3453 static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
3455 struct ipr_ioarcb *ioarcb;
3456 struct ipr_ioasa *ioasa;
3458 ioarcb = &ipr_cmd->ioarcb;
3459 ioasa = &ipr_cmd->ioasa;
3461 memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
3462 ioarcb->write_data_transfer_length = 0;
3463 ioarcb->read_data_transfer_length = 0;
3464 ioarcb->write_ioadl_len = 0;
3465 ioarcb->read_ioadl_len = 0;
3466 ioasa->ioasc = 0;
3467 ioasa->residual_data_len = 0;
3471 * ipr_erp_request_sense - Send request sense to a device
3472 * @ipr_cmd: ipr command struct
3474 * This function sends a request sense to a device as a result
3475 * of a check condition.
3477 * Return value:
3478 * nothing
3480 static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd)
3482 struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
3483 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3485 if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
3486 ipr_erp_done(ipr_cmd);
3487 return;
3490 ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
3492 cmd_pkt->request_type = IPR_RQTYPE_SCSICDB;
3493 cmd_pkt->cdb[0] = REQUEST_SENSE;
3494 cmd_pkt->cdb[4] = SCSI_SENSE_BUFFERSIZE;
3495 cmd_pkt->flags_hi |= IPR_FLAGS_HI_SYNC_OVERRIDE;
3496 cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
3497 cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ);
3499 ipr_cmd->ioadl[0].flags_and_data_len =
3500 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | SCSI_SENSE_BUFFERSIZE);
3501 ipr_cmd->ioadl[0].address =
3502 cpu_to_be32(ipr_cmd->sense_buffer_dma);
3504 ipr_cmd->ioarcb.read_ioadl_len =
3505 cpu_to_be32(sizeof(struct ipr_ioadl_desc));
3506 ipr_cmd->ioarcb.read_data_transfer_length =
3507 cpu_to_be32(SCSI_SENSE_BUFFERSIZE);
3509 ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout,
3510 IPR_REQUEST_SENSE_TIMEOUT * 2);
3514 * ipr_erp_cancel_all - Send cancel all to a device
3515 * @ipr_cmd: ipr command struct
3517 * This function sends a cancel all to a device to clear the
3518 * queue. If we are running TCQ on the device, QERR is set to 1,
3519 * which means all outstanding ops have been dropped on the floor.
3520 * Cancel all will return them to us.
3522 * Return value:
3523 * nothing
3525 static void ipr_erp_cancel_all(struct ipr_cmnd *ipr_cmd)
3527 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
3528 struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
3529 struct ipr_cmd_pkt *cmd_pkt;
3531 res->in_erp = 1;
3533 ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
3535 if (!scsi_get_tag_type(scsi_cmd->device)) {
3536 ipr_erp_request_sense(ipr_cmd);
3537 return;
3540 cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
3541 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3542 cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
3544 ipr_do_req(ipr_cmd, ipr_erp_request_sense, ipr_timeout,
3545 IPR_CANCEL_ALL_TIMEOUT);
3549 * ipr_dump_ioasa - Dump contents of IOASA
3550 * @ioa_cfg: ioa config struct
3551 * @ipr_cmd: ipr command struct
3553 * This function is invoked by the interrupt handler when ops
3554 * fail. It will log the IOASA if appropriate. Only called
3555 * for GPDD ops.
3557 * Return value:
3558 * none
3560 static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
3561 struct ipr_cmnd *ipr_cmd)
3563 int i;
3564 u16 data_len;
3565 u32 ioasc;
3566 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
3567 __be32 *ioasa_data = (__be32 *)ioasa;
3568 int error_index;
3570 ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK;
3572 if (0 == ioasc)
3573 return;
3575 if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
3576 return;
3578 error_index = ipr_get_error(ioasc);
3580 if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
3581 /* Don't log an error if the IOA already logged one */
3582 if (ioasa->ilid != 0)
3583 return;
3585 if (ipr_error_table[error_index].log_ioasa == 0)
3586 return;
3589 ipr_sdev_err(ipr_cmd->scsi_cmd->device, "%s\n",
3590 ipr_error_table[error_index].error);
3592 if ((ioasa->u.gpdd.end_state <= ARRAY_SIZE(ipr_gpdd_dev_end_states)) &&
3593 (ioasa->u.gpdd.bus_phase <= ARRAY_SIZE(ipr_gpdd_dev_bus_phases))) {
3594 ipr_sdev_err(ipr_cmd->scsi_cmd->device,
3595 "Device End state: %s Phase: %s\n",
3596 ipr_gpdd_dev_end_states[ioasa->u.gpdd.end_state],
3597 ipr_gpdd_dev_bus_phases[ioasa->u.gpdd.bus_phase]);
3600 if (sizeof(struct ipr_ioasa) < be16_to_cpu(ioasa->ret_stat_len))
3601 data_len = sizeof(struct ipr_ioasa);
3602 else
3603 data_len = be16_to_cpu(ioasa->ret_stat_len);
3605 ipr_err("IOASA Dump:\n");
3607 for (i = 0; i < data_len / 4; i += 4) {
3608 ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
3609 be32_to_cpu(ioasa_data[i]),
3610 be32_to_cpu(ioasa_data[i+1]),
3611 be32_to_cpu(ioasa_data[i+2]),
3612 be32_to_cpu(ioasa_data[i+3]));
3617 * ipr_gen_sense - Generate SCSI sense data from an IOASA
3618 * @ioasa: IOASA
3619 * @sense_buf: sense data buffer
3621 * Return value:
3622 * none
3624 static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd)
3626 u32 failing_lba;
3627 u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer;
3628 struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata;
3629 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
3630 u32 ioasc = be32_to_cpu(ioasa->ioasc);
3632 memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
3634 if (ioasc >= IPR_FIRST_DRIVER_IOASC)
3635 return;
3637 ipr_cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION;
3639 if (ipr_is_vset_device(res) &&
3640 ioasc == IPR_IOASC_MED_DO_NOT_REALLOC &&
3641 ioasa->u.vset.failing_lba_hi != 0) {
3642 sense_buf[0] = 0x72;
3643 sense_buf[1] = IPR_IOASC_SENSE_KEY(ioasc);
3644 sense_buf[2] = IPR_IOASC_SENSE_CODE(ioasc);
3645 sense_buf[3] = IPR_IOASC_SENSE_QUAL(ioasc);
3647 sense_buf[7] = 12;
3648 sense_buf[8] = 0;
3649 sense_buf[9] = 0x0A;
3650 sense_buf[10] = 0x80;
3652 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_hi);
3654 sense_buf[12] = (failing_lba & 0xff000000) >> 24;
3655 sense_buf[13] = (failing_lba & 0x00ff0000) >> 16;
3656 sense_buf[14] = (failing_lba & 0x0000ff00) >> 8;
3657 sense_buf[15] = failing_lba & 0x000000ff;
3659 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
3661 sense_buf[16] = (failing_lba & 0xff000000) >> 24;
3662 sense_buf[17] = (failing_lba & 0x00ff0000) >> 16;
3663 sense_buf[18] = (failing_lba & 0x0000ff00) >> 8;
3664 sense_buf[19] = failing_lba & 0x000000ff;
3665 } else {
3666 sense_buf[0] = 0x70;
3667 sense_buf[2] = IPR_IOASC_SENSE_KEY(ioasc);
3668 sense_buf[12] = IPR_IOASC_SENSE_CODE(ioasc);
3669 sense_buf[13] = IPR_IOASC_SENSE_QUAL(ioasc);
3671 /* Illegal request */
3672 if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) &&
3673 (be32_to_cpu(ioasa->ioasc_specific) & IPR_FIELD_POINTER_VALID)) {
3674 sense_buf[7] = 10; /* additional length */
3676 /* IOARCB was in error */
3677 if (IPR_IOASC_SENSE_CODE(ioasc) == 0x24)
3678 sense_buf[15] = 0xC0;
3679 else /* Parameter data was invalid */
3680 sense_buf[15] = 0x80;
3682 sense_buf[16] =
3683 ((IPR_FIELD_POINTER_MASK &
3684 be32_to_cpu(ioasa->ioasc_specific)) >> 8) & 0xff;
3685 sense_buf[17] =
3686 (IPR_FIELD_POINTER_MASK &
3687 be32_to_cpu(ioasa->ioasc_specific)) & 0xff;
3688 } else {
3689 if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) {
3690 if (ipr_is_vset_device(res))
3691 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
3692 else
3693 failing_lba = be32_to_cpu(ioasa->u.dasd.failing_lba);
3695 sense_buf[0] |= 0x80; /* Or in the Valid bit */
3696 sense_buf[3] = (failing_lba & 0xff000000) >> 24;
3697 sense_buf[4] = (failing_lba & 0x00ff0000) >> 16;
3698 sense_buf[5] = (failing_lba & 0x0000ff00) >> 8;
3699 sense_buf[6] = failing_lba & 0x000000ff;
3702 sense_buf[7] = 6; /* additional length */
3708 * ipr_erp_start - Process an error response for a SCSI op
3709 * @ioa_cfg: ioa config struct
3710 * @ipr_cmd: ipr command struct
3712 * This function determines whether or not to initiate ERP
3713 * on the affected device.
3715 * Return value:
3716 * nothing
3718 static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
3719 struct ipr_cmnd *ipr_cmd)
3721 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
3722 struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
3723 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3725 if (!res) {
3726 ipr_scsi_eh_done(ipr_cmd);
3727 return;
3730 if (ipr_is_gscsi(res))
3731 ipr_dump_ioasa(ioa_cfg, ipr_cmd);
3732 else
3733 ipr_gen_sense(ipr_cmd);
3735 switch (ioasc & IPR_IOASC_IOASC_MASK) {
3736 case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
3737 scsi_cmd->result |= (DID_IMM_RETRY << 16);
3738 break;
3739 case IPR_IOASC_IR_RESOURCE_HANDLE:
3740 scsi_cmd->result |= (DID_NO_CONNECT << 16);
3741 break;
3742 case IPR_IOASC_HW_SEL_TIMEOUT:
3743 scsi_cmd->result |= (DID_NO_CONNECT << 16);
3744 res->needs_sync_complete = 1;
3745 break;
3746 case IPR_IOASC_SYNC_REQUIRED:
3747 if (!res->in_erp)
3748 res->needs_sync_complete = 1;
3749 scsi_cmd->result |= (DID_IMM_RETRY << 16);
3750 break;
3751 case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */
3752 scsi_cmd->result |= (DID_PASSTHROUGH << 16);
3753 break;
3754 case IPR_IOASC_BUS_WAS_RESET:
3755 case IPR_IOASC_BUS_WAS_RESET_BY_OTHER:
3757 * Report the bus reset and ask for a retry. The device
3758 * will give CC/UA the next command.
3760 if (!res->resetting_device)
3761 scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);
3762 scsi_cmd->result |= (DID_ERROR << 16);
3763 res->needs_sync_complete = 1;
3764 break;
3765 case IPR_IOASC_HW_DEV_BUS_STATUS:
3766 scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);
3767 if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {
3768 ipr_erp_cancel_all(ipr_cmd);
3769 return;
3771 res->needs_sync_complete = 1;
3772 break;
3773 case IPR_IOASC_NR_INIT_CMD_REQUIRED:
3774 break;
3775 default:
3776 scsi_cmd->result |= (DID_ERROR << 16);
3777 if (!ipr_is_vset_device(res))
3778 res->needs_sync_complete = 1;
3779 break;
3782 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
3783 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3784 scsi_cmd->scsi_done(scsi_cmd);
3788 * ipr_scsi_done - mid-layer done function
3789 * @ipr_cmd: ipr command struct
3791 * This function is invoked by the interrupt handler for
3792 * ops generated by the SCSI mid-layer
3794 * Return value:
3795 * none
3797 static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
3799 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3800 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
3801 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3803 scsi_cmd->resid = be32_to_cpu(ipr_cmd->ioasa.residual_data_len);
3805 if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
3806 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
3807 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3808 scsi_cmd->scsi_done(scsi_cmd);
3809 } else
3810 ipr_erp_start(ioa_cfg, ipr_cmd);
3814 * ipr_save_ioafp_mode_select - Save adapters mode select data
3815 * @ioa_cfg: ioa config struct
3816 * @scsi_cmd: scsi command struct
3818 * This function saves mode select data for the adapter to
3819 * use following an adapter reset.
3821 * Return value:
3822 * 0 on success / SCSI_MLQUEUE_HOST_BUSY on failure
3824 static int ipr_save_ioafp_mode_select(struct ipr_ioa_cfg *ioa_cfg,
3825 struct scsi_cmnd *scsi_cmd)
3827 if (!ioa_cfg->saved_mode_pages) {
3828 ioa_cfg->saved_mode_pages = kmalloc(sizeof(struct ipr_mode_pages),
3829 GFP_ATOMIC);
3830 if (!ioa_cfg->saved_mode_pages) {
3831 dev_err(&ioa_cfg->pdev->dev,
3832 "IOA mode select buffer allocation failed\n");
3833 return SCSI_MLQUEUE_HOST_BUSY;
3837 memcpy(ioa_cfg->saved_mode_pages, scsi_cmd->buffer, scsi_cmd->cmnd[4]);
3838 ioa_cfg->saved_mode_page_len = scsi_cmd->cmnd[4];
3839 return 0;
3843 * ipr_queuecommand - Queue a mid-layer request
3844 * @scsi_cmd: scsi command struct
3845 * @done: done function
3847 * This function queues a request generated by the mid-layer.
3849 * Return value:
3850 * 0 on success
3851 * SCSI_MLQUEUE_DEVICE_BUSY if device is busy
3852 * SCSI_MLQUEUE_HOST_BUSY if host is busy
3854 static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
3855 void (*done) (struct scsi_cmnd *))
3857 struct ipr_ioa_cfg *ioa_cfg;
3858 struct ipr_resource_entry *res;
3859 struct ipr_ioarcb *ioarcb;
3860 struct ipr_cmnd *ipr_cmd;
3861 int rc = 0;
3863 scsi_cmd->scsi_done = done;
3864 ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
3865 res = scsi_cmd->device->hostdata;
3866 scsi_cmd->result = (DID_OK << 16);
3869 * We are currently blocking all devices due to a host reset
3870 * We have told the host to stop giving us new requests, but
3871 * ERP ops don't count. FIXME
3873 if (unlikely(!ioa_cfg->allow_cmds && !ioa_cfg->ioa_is_dead))
3874 return SCSI_MLQUEUE_HOST_BUSY;
3877 * FIXME - Create scsi_set_host_offline interface
3878 * and the ioa_is_dead check can be removed
3880 if (unlikely(ioa_cfg->ioa_is_dead || !res)) {
3881 memset(scsi_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
3882 scsi_cmd->result = (DID_NO_CONNECT << 16);
3883 scsi_cmd->scsi_done(scsi_cmd);
3884 return 0;
3887 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3888 ioarcb = &ipr_cmd->ioarcb;
3889 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
3891 memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len);
3892 ipr_cmd->scsi_cmd = scsi_cmd;
3893 ioarcb->res_handle = res->cfgte.res_handle;
3894 ipr_cmd->done = ipr_scsi_done;
3895 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
3897 if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
3898 if (scsi_cmd->underflow == 0)
3899 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
3901 if (res->needs_sync_complete) {
3902 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_SYNC_COMPLETE;
3903 res->needs_sync_complete = 0;
3906 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
3907 ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
3908 ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
3909 ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
3912 if (scsi_cmd->cmnd[0] >= 0xC0 &&
3913 (!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE))
3914 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
3916 if (ipr_is_ioa_resource(res) && scsi_cmd->cmnd[0] == MODE_SELECT)
3917 rc = ipr_save_ioafp_mode_select(ioa_cfg, scsi_cmd);
3919 if (likely(rc == 0))
3920 rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
3922 if (likely(rc == 0)) {
3923 mb();
3924 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
3925 ioa_cfg->regs.ioarrin_reg);
3926 } else {
3927 list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3928 return SCSI_MLQUEUE_HOST_BUSY;
3931 return 0;
3935 * ipr_info - Get information about the card/driver
3936 * @scsi_host: scsi host struct
3938 * Return value:
3939 * pointer to buffer with description string
3941 static const char * ipr_ioa_info(struct Scsi_Host *host)
3943 static char buffer[512];
3944 struct ipr_ioa_cfg *ioa_cfg;
3945 unsigned long lock_flags = 0;
3947 ioa_cfg = (struct ipr_ioa_cfg *) host->hostdata;
3949 spin_lock_irqsave(host->host_lock, lock_flags);
3950 sprintf(buffer, "IBM %X Storage Adapter", ioa_cfg->type);
3951 spin_unlock_irqrestore(host->host_lock, lock_flags);
3953 return buffer;
3956 static struct scsi_host_template driver_template = {
3957 .module = THIS_MODULE,
3958 .name = "IPR",
3959 .info = ipr_ioa_info,
3960 .queuecommand = ipr_queuecommand,
3961 .eh_abort_handler = ipr_eh_abort,
3962 .eh_device_reset_handler = ipr_eh_dev_reset,
3963 .eh_host_reset_handler = ipr_eh_host_reset,
3964 .slave_alloc = ipr_slave_alloc,
3965 .slave_configure = ipr_slave_configure,
3966 .slave_destroy = ipr_slave_destroy,
3967 .change_queue_depth = ipr_change_queue_depth,
3968 .change_queue_type = ipr_change_queue_type,
3969 .bios_param = ipr_biosparam,
3970 .can_queue = IPR_MAX_COMMANDS,
3971 .this_id = -1,
3972 .sg_tablesize = IPR_MAX_SGLIST,
3973 .max_sectors = IPR_IOA_MAX_SECTORS,
3974 .cmd_per_lun = IPR_MAX_CMD_PER_LUN,
3975 .use_clustering = ENABLE_CLUSTERING,
3976 .shost_attrs = ipr_ioa_attrs,
3977 .sdev_attrs = ipr_dev_attrs,
3978 .proc_name = IPR_NAME
3981 #ifdef CONFIG_PPC_PSERIES
3982 static const u16 ipr_blocked_processors[] = {
3983 PV_NORTHSTAR,
3984 PV_PULSAR,
3985 PV_POWER4,
3986 PV_ICESTAR,
3987 PV_SSTAR,
3988 PV_POWER4p,
3989 PV_630,
3990 PV_630p
3994 * ipr_invalid_adapter - Determine if this adapter is supported on this hardware
3995 * @ioa_cfg: ioa cfg struct
3997 * Adapters that use Gemstone revision < 3.1 do not work reliably on
3998 * certain pSeries hardware. This function determines if the given
3999 * adapter is in one of these confgurations or not.
4001 * Return value:
4002 * 1 if adapter is not supported / 0 if adapter is supported
4004 static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
4006 u8 rev_id;
4007 int i;
4009 if (ioa_cfg->type == 0x5702) {
4010 if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
4011 &rev_id) == PCIBIOS_SUCCESSFUL) {
4012 if (rev_id < 4) {
4013 for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
4014 if (__is_processor(ipr_blocked_processors[i]))
4015 return 1;
4020 return 0;
4022 #else
4023 #define ipr_invalid_adapter(ioa_cfg) 0
4024 #endif
4027 * ipr_ioa_bringdown_done - IOA bring down completion.
4028 * @ipr_cmd: ipr command struct
4030 * This function processes the completion of an adapter bring down.
4031 * It wakes any reset sleepers.
4033 * Return value:
4034 * IPR_RC_JOB_RETURN
4036 static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd)
4038 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4040 ENTER;
4041 ioa_cfg->in_reset_reload = 0;
4042 ioa_cfg->reset_retries = 0;
4043 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4044 wake_up_all(&ioa_cfg->reset_wait_q);
4046 spin_unlock_irq(ioa_cfg->host->host_lock);
4047 scsi_unblock_requests(ioa_cfg->host);
4048 spin_lock_irq(ioa_cfg->host->host_lock);
4049 LEAVE;
4051 return IPR_RC_JOB_RETURN;
4055 * ipr_ioa_reset_done - IOA reset completion.
4056 * @ipr_cmd: ipr command struct
4058 * This function processes the completion of an adapter reset.
4059 * It schedules any necessary mid-layer add/removes and
4060 * wakes any reset sleepers.
4062 * Return value:
4063 * IPR_RC_JOB_RETURN
4065 static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd)
4067 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4068 struct ipr_resource_entry *res;
4069 struct ipr_hostrcb *hostrcb, *temp;
4070 int i = 0;
4072 ENTER;
4073 ioa_cfg->in_reset_reload = 0;
4074 ioa_cfg->allow_cmds = 1;
4075 ioa_cfg->reset_cmd = NULL;
4077 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
4078 if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) {
4079 ipr_trace;
4080 break;
4083 schedule_work(&ioa_cfg->work_q);
4085 list_for_each_entry_safe(hostrcb, temp, &ioa_cfg->hostrcb_free_q, queue) {
4086 list_del(&hostrcb->queue);
4087 if (i++ < IPR_NUM_LOG_HCAMS)
4088 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
4089 else
4090 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
4093 dev_info(&ioa_cfg->pdev->dev, "IOA initialized.\n");
4095 ioa_cfg->reset_retries = 0;
4096 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4097 wake_up_all(&ioa_cfg->reset_wait_q);
4099 spin_unlock_irq(ioa_cfg->host->host_lock);
4100 scsi_unblock_requests(ioa_cfg->host);
4101 spin_lock_irq(ioa_cfg->host->host_lock);
4103 if (!ioa_cfg->allow_cmds)
4104 scsi_block_requests(ioa_cfg->host);
4106 LEAVE;
4107 return IPR_RC_JOB_RETURN;
4111 * ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer
4112 * @supported_dev: supported device struct
4113 * @vpids: vendor product id struct
4115 * Return value:
4116 * none
4118 static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev,
4119 struct ipr_std_inq_vpids *vpids)
4121 memset(supported_dev, 0, sizeof(struct ipr_supported_device));
4122 memcpy(&supported_dev->vpids, vpids, sizeof(struct ipr_std_inq_vpids));
4123 supported_dev->num_records = 1;
4124 supported_dev->data_length =
4125 cpu_to_be16(sizeof(struct ipr_supported_device));
4126 supported_dev->reserved = 0;
4130 * ipr_set_supported_devs - Send Set Supported Devices for a device
4131 * @ipr_cmd: ipr command struct
4133 * This function send a Set Supported Devices to the adapter
4135 * Return value:
4136 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
4138 static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
4140 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4141 struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev;
4142 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4143 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4144 struct ipr_resource_entry *res = ipr_cmd->u.res;
4146 ipr_cmd->job_step = ipr_ioa_reset_done;
4148 list_for_each_entry_continue(res, &ioa_cfg->used_res_q, queue) {
4149 if (!ipr_is_af_dasd_device(res))
4150 continue;
4152 ipr_cmd->u.res = res;
4153 ipr_set_sup_dev_dflt(supp_dev, &res->cfgte.std_inq_data.vpids);
4155 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
4156 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4157 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
4159 ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES;
4160 ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff;
4161 ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff;
4163 ioadl->flags_and_data_len = cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST |
4164 sizeof(struct ipr_supported_device));
4165 ioadl->address = cpu_to_be32(ioa_cfg->vpd_cbs_dma +
4166 offsetof(struct ipr_misc_cbs, supp_dev));
4167 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4168 ioarcb->write_data_transfer_length =
4169 cpu_to_be32(sizeof(struct ipr_supported_device));
4171 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
4172 IPR_SET_SUP_DEVICE_TIMEOUT);
4174 ipr_cmd->job_step = ipr_set_supported_devs;
4175 return IPR_RC_JOB_RETURN;
4178 return IPR_RC_JOB_CONTINUE;
4182 * ipr_get_mode_page - Locate specified mode page
4183 * @mode_pages: mode page buffer
4184 * @page_code: page code to find
4185 * @len: minimum required length for mode page
4187 * Return value:
4188 * pointer to mode page / NULL on failure
4190 static void *ipr_get_mode_page(struct ipr_mode_pages *mode_pages,
4191 u32 page_code, u32 len)
4193 struct ipr_mode_page_hdr *mode_hdr;
4194 u32 page_length;
4195 u32 length;
4197 if (!mode_pages || (mode_pages->hdr.length == 0))
4198 return NULL;
4200 length = (mode_pages->hdr.length + 1) - 4 - mode_pages->hdr.block_desc_len;
4201 mode_hdr = (struct ipr_mode_page_hdr *)
4202 (mode_pages->data + mode_pages->hdr.block_desc_len);
4204 while (length) {
4205 if (IPR_GET_MODE_PAGE_CODE(mode_hdr) == page_code) {
4206 if (mode_hdr->page_length >= (len - sizeof(struct ipr_mode_page_hdr)))
4207 return mode_hdr;
4208 break;
4209 } else {
4210 page_length = (sizeof(struct ipr_mode_page_hdr) +
4211 mode_hdr->page_length);
4212 length -= page_length;
4213 mode_hdr = (struct ipr_mode_page_hdr *)
4214 ((unsigned long)mode_hdr + page_length);
4217 return NULL;
4221 * ipr_check_term_power - Check for term power errors
4222 * @ioa_cfg: ioa config struct
4223 * @mode_pages: IOAFP mode pages buffer
4225 * Check the IOAFP's mode page 28 for term power errors
4227 * Return value:
4228 * nothing
4230 static void ipr_check_term_power(struct ipr_ioa_cfg *ioa_cfg,
4231 struct ipr_mode_pages *mode_pages)
4233 int i;
4234 int entry_length;
4235 struct ipr_dev_bus_entry *bus;
4236 struct ipr_mode_page28 *mode_page;
4238 mode_page = ipr_get_mode_page(mode_pages, 0x28,
4239 sizeof(struct ipr_mode_page28));
4241 entry_length = mode_page->entry_length;
4243 bus = mode_page->bus;
4245 for (i = 0; i < mode_page->num_entries; i++) {
4246 if (bus->flags & IPR_SCSI_ATTR_NO_TERM_PWR) {
4247 dev_err(&ioa_cfg->pdev->dev,
4248 "Term power is absent on scsi bus %d\n",
4249 bus->res_addr.bus);
4252 bus = (struct ipr_dev_bus_entry *)((char *)bus + entry_length);
4257 * ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table
4258 * @ioa_cfg: ioa config struct
4260 * Looks through the config table checking for SES devices. If
4261 * the SES device is in the SES table indicating a maximum SCSI
4262 * bus speed, the speed is limited for the bus.
4264 * Return value:
4265 * none
4267 static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg)
4269 u32 max_xfer_rate;
4270 int i;
4272 for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
4273 max_xfer_rate = ipr_get_max_scsi_speed(ioa_cfg, i,
4274 ioa_cfg->bus_attr[i].bus_width);
4276 if (max_xfer_rate < ioa_cfg->bus_attr[i].max_xfer_rate)
4277 ioa_cfg->bus_attr[i].max_xfer_rate = max_xfer_rate;
4282 * ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28
4283 * @ioa_cfg: ioa config struct
4284 * @mode_pages: mode page 28 buffer
4286 * Updates mode page 28 based on driver configuration
4288 * Return value:
4289 * none
4291 static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg,
4292 struct ipr_mode_pages *mode_pages)
4294 int i, entry_length;
4295 struct ipr_dev_bus_entry *bus;
4296 struct ipr_bus_attributes *bus_attr;
4297 struct ipr_mode_page28 *mode_page;
4299 mode_page = ipr_get_mode_page(mode_pages, 0x28,
4300 sizeof(struct ipr_mode_page28));
4302 entry_length = mode_page->entry_length;
4304 /* Loop for each device bus entry */
4305 for (i = 0, bus = mode_page->bus;
4306 i < mode_page->num_entries;
4307 i++, bus = (struct ipr_dev_bus_entry *)((u8 *)bus + entry_length)) {
4308 if (bus->res_addr.bus > IPR_MAX_NUM_BUSES) {
4309 dev_err(&ioa_cfg->pdev->dev,
4310 "Invalid resource address reported: 0x%08X\n",
4311 IPR_GET_PHYS_LOC(bus->res_addr));
4312 continue;
4315 bus_attr = &ioa_cfg->bus_attr[i];
4316 bus->extended_reset_delay = IPR_EXTENDED_RESET_DELAY;
4317 bus->bus_width = bus_attr->bus_width;
4318 bus->max_xfer_rate = cpu_to_be32(bus_attr->max_xfer_rate);
4319 bus->flags &= ~IPR_SCSI_ATTR_QAS_MASK;
4320 if (bus_attr->qas_enabled)
4321 bus->flags |= IPR_SCSI_ATTR_ENABLE_QAS;
4322 else
4323 bus->flags |= IPR_SCSI_ATTR_DISABLE_QAS;
4328 * ipr_build_mode_select - Build a mode select command
4329 * @ipr_cmd: ipr command struct
4330 * @res_handle: resource handle to send command to
4331 * @parm: Byte 2 of Mode Sense command
4332 * @dma_addr: DMA buffer address
4333 * @xfer_len: data transfer length
4335 * Return value:
4336 * none
4338 static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd,
4339 __be32 res_handle, u8 parm, u32 dma_addr,
4340 u8 xfer_len)
4342 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4343 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4345 ioarcb->res_handle = res_handle;
4346 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
4347 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4348 ioarcb->cmd_pkt.cdb[0] = MODE_SELECT;
4349 ioarcb->cmd_pkt.cdb[1] = parm;
4350 ioarcb->cmd_pkt.cdb[4] = xfer_len;
4352 ioadl->flags_and_data_len =
4353 cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST | xfer_len);
4354 ioadl->address = cpu_to_be32(dma_addr);
4355 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4356 ioarcb->write_data_transfer_length = cpu_to_be32(xfer_len);
4360 * ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA
4361 * @ipr_cmd: ipr command struct
4363 * This function sets up the SCSI bus attributes and sends
4364 * a Mode Select for Page 28 to activate them.
4366 * Return value:
4367 * IPR_RC_JOB_RETURN
4369 static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
4371 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4372 struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages;
4373 int length;
4375 ENTER;
4376 if (ioa_cfg->saved_mode_pages) {
4377 memcpy(mode_pages, ioa_cfg->saved_mode_pages,
4378 ioa_cfg->saved_mode_page_len);
4379 length = ioa_cfg->saved_mode_page_len;
4380 } else {
4381 ipr_scsi_bus_speed_limit(ioa_cfg);
4382 ipr_check_term_power(ioa_cfg, mode_pages);
4383 ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages);
4384 length = mode_pages->hdr.length + 1;
4385 mode_pages->hdr.length = 0;
4388 ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11,
4389 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
4390 length);
4392 ipr_cmd->job_step = ipr_set_supported_devs;
4393 ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
4394 struct ipr_resource_entry, queue);
4396 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
4398 LEAVE;
4399 return IPR_RC_JOB_RETURN;
4403 * ipr_build_mode_sense - Builds a mode sense command
4404 * @ipr_cmd: ipr command struct
4405 * @res: resource entry struct
4406 * @parm: Byte 2 of mode sense command
4407 * @dma_addr: DMA address of mode sense buffer
4408 * @xfer_len: Size of DMA buffer
4410 * Return value:
4411 * none
4413 static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd,
4414 __be32 res_handle,
4415 u8 parm, u32 dma_addr, u8 xfer_len)
4417 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4418 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4420 ioarcb->res_handle = res_handle;
4421 ioarcb->cmd_pkt.cdb[0] = MODE_SENSE;
4422 ioarcb->cmd_pkt.cdb[2] = parm;
4423 ioarcb->cmd_pkt.cdb[4] = xfer_len;
4424 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
4426 ioadl->flags_and_data_len =
4427 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
4428 ioadl->address = cpu_to_be32(dma_addr);
4429 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4430 ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
4434 * ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA
4435 * @ipr_cmd: ipr command struct
4437 * This function send a Page 28 mode sense to the IOA to
4438 * retrieve SCSI bus attributes.
4440 * Return value:
4441 * IPR_RC_JOB_RETURN
4443 static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd *ipr_cmd)
4445 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4447 ENTER;
4448 ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE),
4449 0x28, ioa_cfg->vpd_cbs_dma +
4450 offsetof(struct ipr_misc_cbs, mode_pages),
4451 sizeof(struct ipr_mode_pages));
4453 ipr_cmd->job_step = ipr_ioafp_mode_select_page28;
4455 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
4457 LEAVE;
4458 return IPR_RC_JOB_RETURN;
4462 * ipr_init_res_table - Initialize the resource table
4463 * @ipr_cmd: ipr command struct
4465 * This function looks through the existing resource table, comparing
4466 * it with the config table. This function will take care of old/new
4467 * devices and schedule adding/removing them from the mid-layer
4468 * as appropriate.
4470 * Return value:
4471 * IPR_RC_JOB_CONTINUE
4473 static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd)
4475 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4476 struct ipr_resource_entry *res, *temp;
4477 struct ipr_config_table_entry *cfgte;
4478 int found, i;
4479 LIST_HEAD(old_res);
4481 ENTER;
4482 if (ioa_cfg->cfg_table->hdr.flags & IPR_UCODE_DOWNLOAD_REQ)
4483 dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n");
4485 list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue)
4486 list_move_tail(&res->queue, &old_res);
4488 for (i = 0; i < ioa_cfg->cfg_table->hdr.num_entries; i++) {
4489 cfgte = &ioa_cfg->cfg_table->dev[i];
4490 found = 0;
4492 list_for_each_entry_safe(res, temp, &old_res, queue) {
4493 if (!memcmp(&res->cfgte.res_addr,
4494 &cfgte->res_addr, sizeof(cfgte->res_addr))) {
4495 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
4496 found = 1;
4497 break;
4501 if (!found) {
4502 if (list_empty(&ioa_cfg->free_res_q)) {
4503 dev_err(&ioa_cfg->pdev->dev, "Too many devices attached\n");
4504 break;
4507 found = 1;
4508 res = list_entry(ioa_cfg->free_res_q.next,
4509 struct ipr_resource_entry, queue);
4510 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
4511 ipr_init_res_entry(res);
4512 res->add_to_ml = 1;
4515 if (found)
4516 memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
4519 list_for_each_entry_safe(res, temp, &old_res, queue) {
4520 if (res->sdev) {
4521 res->del_from_ml = 1;
4522 res->sdev->hostdata = NULL;
4523 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
4524 } else {
4525 list_move_tail(&res->queue, &ioa_cfg->free_res_q);
4529 ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
4531 LEAVE;
4532 return IPR_RC_JOB_CONTINUE;
4536 * ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter.
4537 * @ipr_cmd: ipr command struct
4539 * This function sends a Query IOA Configuration command
4540 * to the adapter to retrieve the IOA configuration table.
4542 * Return value:
4543 * IPR_RC_JOB_RETURN
4545 static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
4547 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4548 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4549 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4550 struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
4552 ENTER;
4553 dev_info(&ioa_cfg->pdev->dev, "Adapter firmware version: %02X%02X%02X%02X\n",
4554 ucode_vpd->major_release, ucode_vpd->card_type,
4555 ucode_vpd->minor_release[0], ucode_vpd->minor_release[1]);
4556 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
4557 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
4559 ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG;
4560 ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_config_table) >> 8) & 0xff;
4561 ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_config_table) & 0xff;
4563 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4564 ioarcb->read_data_transfer_length =
4565 cpu_to_be32(sizeof(struct ipr_config_table));
4567 ioadl->address = cpu_to_be32(ioa_cfg->cfg_table_dma);
4568 ioadl->flags_and_data_len =
4569 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(struct ipr_config_table));
4571 ipr_cmd->job_step = ipr_init_res_table;
4573 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
4575 LEAVE;
4576 return IPR_RC_JOB_RETURN;
4580 * ipr_ioafp_inquiry - Send an Inquiry to the adapter.
4581 * @ipr_cmd: ipr command struct
4583 * This utility function sends an inquiry to the adapter.
4585 * Return value:
4586 * none
4588 static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page,
4589 u32 dma_addr, u8 xfer_len)
4591 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4592 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4594 ENTER;
4595 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
4596 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
4598 ioarcb->cmd_pkt.cdb[0] = INQUIRY;
4599 ioarcb->cmd_pkt.cdb[1] = flags;
4600 ioarcb->cmd_pkt.cdb[2] = page;
4601 ioarcb->cmd_pkt.cdb[4] = xfer_len;
4603 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4604 ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
4606 ioadl->address = cpu_to_be32(dma_addr);
4607 ioadl->flags_and_data_len =
4608 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
4610 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
4611 LEAVE;
4615 * ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter.
4616 * @ipr_cmd: ipr command struct
4618 * This function sends a Page 3 inquiry to the adapter
4619 * to retrieve software VPD information.
4621 * Return value:
4622 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
4624 static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd)
4626 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4627 char type[5];
4629 ENTER;
4631 /* Grab the type out of the VPD and store it away */
4632 memcpy(type, ioa_cfg->vpd_cbs->ioa_vpd.std_inq_data.vpids.product_id, 4);
4633 type[4] = '\0';
4634 ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
4636 ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
4638 ipr_ioafp_inquiry(ipr_cmd, 1, 3,
4639 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page3_data),
4640 sizeof(struct ipr_inquiry_page3));
4642 LEAVE;
4643 return IPR_RC_JOB_RETURN;
4647 * ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter.
4648 * @ipr_cmd: ipr command struct
4650 * This function sends a standard inquiry to the adapter.
4652 * Return value:
4653 * IPR_RC_JOB_RETURN
4655 static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd)
4657 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4659 ENTER;
4660 ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
4662 ipr_ioafp_inquiry(ipr_cmd, 0, 0,
4663 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, ioa_vpd),
4664 sizeof(struct ipr_ioa_vpd));
4666 LEAVE;
4667 return IPR_RC_JOB_RETURN;
4671 * ipr_ioafp_indentify_hrrq - Send Identify Host RRQ.
4672 * @ipr_cmd: ipr command struct
4674 * This function send an Identify Host Request Response Queue
4675 * command to establish the HRRQ with the adapter.
4677 * Return value:
4678 * IPR_RC_JOB_RETURN
4680 static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd *ipr_cmd)
4682 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4683 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4685 ENTER;
4686 dev_info(&ioa_cfg->pdev->dev, "Starting IOA initialization sequence.\n");
4688 ioarcb->cmd_pkt.cdb[0] = IPR_ID_HOST_RR_Q;
4689 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
4691 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
4692 ioarcb->cmd_pkt.cdb[2] =
4693 ((u32) ioa_cfg->host_rrq_dma >> 24) & 0xff;
4694 ioarcb->cmd_pkt.cdb[3] =
4695 ((u32) ioa_cfg->host_rrq_dma >> 16) & 0xff;
4696 ioarcb->cmd_pkt.cdb[4] =
4697 ((u32) ioa_cfg->host_rrq_dma >> 8) & 0xff;
4698 ioarcb->cmd_pkt.cdb[5] =
4699 ((u32) ioa_cfg->host_rrq_dma) & 0xff;
4700 ioarcb->cmd_pkt.cdb[7] =
4701 ((sizeof(u32) * IPR_NUM_CMD_BLKS) >> 8) & 0xff;
4702 ioarcb->cmd_pkt.cdb[8] =
4703 (sizeof(u32) * IPR_NUM_CMD_BLKS) & 0xff;
4705 ipr_cmd->job_step = ipr_ioafp_std_inquiry;
4707 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
4709 LEAVE;
4710 return IPR_RC_JOB_RETURN;
4714 * ipr_reset_timer_done - Adapter reset timer function
4715 * @ipr_cmd: ipr command struct
4717 * Description: This function is used in adapter reset processing
4718 * for timing events. If the reset_cmd pointer in the IOA
4719 * config struct is not this adapter's we are doing nested
4720 * resets and fail_all_ops will take care of freeing the
4721 * command block.
4723 * Return value:
4724 * none
4726 static void ipr_reset_timer_done(struct ipr_cmnd *ipr_cmd)
4728 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4729 unsigned long lock_flags = 0;
4731 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
4733 if (ioa_cfg->reset_cmd == ipr_cmd) {
4734 list_del(&ipr_cmd->queue);
4735 ipr_cmd->done(ipr_cmd);
4738 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
4742 * ipr_reset_start_timer - Start a timer for adapter reset job
4743 * @ipr_cmd: ipr command struct
4744 * @timeout: timeout value
4746 * Description: This function is used in adapter reset processing
4747 * for timing events. If the reset_cmd pointer in the IOA
4748 * config struct is not this adapter's we are doing nested
4749 * resets and fail_all_ops will take care of freeing the
4750 * command block.
4752 * Return value:
4753 * none
4755 static void ipr_reset_start_timer(struct ipr_cmnd *ipr_cmd,
4756 unsigned long timeout)
4758 list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
4759 ipr_cmd->done = ipr_reset_ioa_job;
4761 ipr_cmd->timer.data = (unsigned long) ipr_cmd;
4762 ipr_cmd->timer.expires = jiffies + timeout;
4763 ipr_cmd->timer.function = (void (*)(unsigned long))ipr_reset_timer_done;
4764 add_timer(&ipr_cmd->timer);
4768 * ipr_init_ioa_mem - Initialize ioa_cfg control block
4769 * @ioa_cfg: ioa cfg struct
4771 * Return value:
4772 * nothing
4774 static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg)
4776 memset(ioa_cfg->host_rrq, 0, sizeof(u32) * IPR_NUM_CMD_BLKS);
4778 /* Initialize Host RRQ pointers */
4779 ioa_cfg->hrrq_start = ioa_cfg->host_rrq;
4780 ioa_cfg->hrrq_end = &ioa_cfg->host_rrq[IPR_NUM_CMD_BLKS - 1];
4781 ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
4782 ioa_cfg->toggle_bit = 1;
4784 /* Zero out config table */
4785 memset(ioa_cfg->cfg_table, 0, sizeof(struct ipr_config_table));
4789 * ipr_reset_enable_ioa - Enable the IOA following a reset.
4790 * @ipr_cmd: ipr command struct
4792 * This function reinitializes some control blocks and
4793 * enables destructive diagnostics on the adapter.
4795 * Return value:
4796 * IPR_RC_JOB_RETURN
4798 static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
4800 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4801 volatile u32 int_reg;
4803 ENTER;
4804 ipr_cmd->job_step = ipr_ioafp_indentify_hrrq;
4805 ipr_init_ioa_mem(ioa_cfg);
4807 ioa_cfg->allow_interrupts = 1;
4808 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
4810 if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
4811 writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
4812 ioa_cfg->regs.clr_interrupt_mask_reg);
4813 int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
4814 return IPR_RC_JOB_CONTINUE;
4817 /* Enable destructive diagnostics on IOA */
4818 writel(IPR_DOORBELL, ioa_cfg->regs.set_uproc_interrupt_reg);
4820 writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg);
4821 int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
4823 dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
4825 ipr_cmd->timer.data = (unsigned long) ipr_cmd;
4826 ipr_cmd->timer.expires = jiffies + (ipr_transop_timeout * HZ);
4827 ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
4828 ipr_cmd->done = ipr_reset_ioa_job;
4829 add_timer(&ipr_cmd->timer);
4830 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
4832 LEAVE;
4833 return IPR_RC_JOB_RETURN;
4837 * ipr_reset_wait_for_dump - Wait for a dump to timeout.
4838 * @ipr_cmd: ipr command struct
4840 * This function is invoked when an adapter dump has run out
4841 * of processing time.
4843 * Return value:
4844 * IPR_RC_JOB_CONTINUE
4846 static int ipr_reset_wait_for_dump(struct ipr_cmnd *ipr_cmd)
4848 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4850 if (ioa_cfg->sdt_state == GET_DUMP)
4851 ioa_cfg->sdt_state = ABORT_DUMP;
4853 ipr_cmd->job_step = ipr_reset_alert;
4855 return IPR_RC_JOB_CONTINUE;
4859 * ipr_unit_check_no_data - Log a unit check/no data error log
4860 * @ioa_cfg: ioa config struct
4862 * Logs an error indicating the adapter unit checked, but for some
4863 * reason, we were unable to fetch the unit check buffer.
4865 * Return value:
4866 * nothing
4868 static void ipr_unit_check_no_data(struct ipr_ioa_cfg *ioa_cfg)
4870 ioa_cfg->errors_logged++;
4871 dev_err(&ioa_cfg->pdev->dev, "IOA unit check with no data\n");
4875 * ipr_get_unit_check_buffer - Get the unit check buffer from the IOA
4876 * @ioa_cfg: ioa config struct
4878 * Fetches the unit check buffer from the adapter by clocking the data
4879 * through the mailbox register.
4881 * Return value:
4882 * nothing
4884 static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
4886 unsigned long mailbox;
4887 struct ipr_hostrcb *hostrcb;
4888 struct ipr_uc_sdt sdt;
4889 int rc, length;
4891 mailbox = readl(ioa_cfg->ioa_mailbox);
4893 if (!ipr_sdt_is_fmt2(mailbox)) {
4894 ipr_unit_check_no_data(ioa_cfg);
4895 return;
4898 memset(&sdt, 0, sizeof(struct ipr_uc_sdt));
4899 rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt,
4900 (sizeof(struct ipr_uc_sdt)) / sizeof(__be32));
4902 if (rc || (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE) ||
4903 !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY)) {
4904 ipr_unit_check_no_data(ioa_cfg);
4905 return;
4908 /* Find length of the first sdt entry (UC buffer) */
4909 length = (be32_to_cpu(sdt.entry[0].end_offset) -
4910 be32_to_cpu(sdt.entry[0].bar_str_offset)) & IPR_FMT2_MBX_ADDR_MASK;
4912 hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next,
4913 struct ipr_hostrcb, queue);
4914 list_del(&hostrcb->queue);
4915 memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam));
4917 rc = ipr_get_ldump_data_section(ioa_cfg,
4918 be32_to_cpu(sdt.entry[0].bar_str_offset),
4919 (__be32 *)&hostrcb->hcam,
4920 min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32));
4922 if (!rc)
4923 ipr_handle_log_data(ioa_cfg, hostrcb);
4924 else
4925 ipr_unit_check_no_data(ioa_cfg);
4927 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
4931 * ipr_reset_restore_cfg_space - Restore PCI config space.
4932 * @ipr_cmd: ipr command struct
4934 * Description: This function restores the saved PCI config space of
4935 * the adapter, fails all outstanding ops back to the callers, and
4936 * fetches the dump/unit check if applicable to this reset.
4938 * Return value:
4939 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
4941 static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
4943 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4944 int rc;
4946 ENTER;
4947 pci_unblock_user_cfg_access(ioa_cfg->pdev);
4948 rc = pci_restore_state(ioa_cfg->pdev);
4950 if (rc != PCIBIOS_SUCCESSFUL) {
4951 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
4952 return IPR_RC_JOB_CONTINUE;
4955 if (ipr_set_pcix_cmd_reg(ioa_cfg)) {
4956 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
4957 return IPR_RC_JOB_CONTINUE;
4960 ipr_fail_all_ops(ioa_cfg);
4962 if (ioa_cfg->ioa_unit_checked) {
4963 ioa_cfg->ioa_unit_checked = 0;
4964 ipr_get_unit_check_buffer(ioa_cfg);
4965 ipr_cmd->job_step = ipr_reset_alert;
4966 ipr_reset_start_timer(ipr_cmd, 0);
4967 return IPR_RC_JOB_RETURN;
4970 if (ioa_cfg->in_ioa_bringdown) {
4971 ipr_cmd->job_step = ipr_ioa_bringdown_done;
4972 } else {
4973 ipr_cmd->job_step = ipr_reset_enable_ioa;
4975 if (GET_DUMP == ioa_cfg->sdt_state) {
4976 ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT);
4977 ipr_cmd->job_step = ipr_reset_wait_for_dump;
4978 schedule_work(&ioa_cfg->work_q);
4979 return IPR_RC_JOB_RETURN;
4983 ENTER;
4984 return IPR_RC_JOB_CONTINUE;
4988 * ipr_reset_start_bist - Run BIST on the adapter.
4989 * @ipr_cmd: ipr command struct
4991 * Description: This function runs BIST on the adapter, then delays 2 seconds.
4993 * Return value:
4994 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
4996 static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
4998 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4999 int rc;
5001 ENTER;
5002 pci_block_user_cfg_access(ioa_cfg->pdev);
5003 rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
5005 if (rc != PCIBIOS_SUCCESSFUL) {
5006 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
5007 rc = IPR_RC_JOB_CONTINUE;
5008 } else {
5009 ipr_cmd->job_step = ipr_reset_restore_cfg_space;
5010 ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
5011 rc = IPR_RC_JOB_RETURN;
5014 LEAVE;
5015 return rc;
5019 * ipr_reset_allowed - Query whether or not IOA can be reset
5020 * @ioa_cfg: ioa config struct
5022 * Return value:
5023 * 0 if reset not allowed / non-zero if reset is allowed
5025 static int ipr_reset_allowed(struct ipr_ioa_cfg *ioa_cfg)
5027 volatile u32 temp_reg;
5029 temp_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
5030 return ((temp_reg & IPR_PCII_CRITICAL_OPERATION) == 0);
5034 * ipr_reset_wait_to_start_bist - Wait for permission to reset IOA.
5035 * @ipr_cmd: ipr command struct
5037 * Description: This function waits for adapter permission to run BIST,
5038 * then runs BIST. If the adapter does not give permission after a
5039 * reasonable time, we will reset the adapter anyway. The impact of
5040 * resetting the adapter without warning the adapter is the risk of
5041 * losing the persistent error log on the adapter. If the adapter is
5042 * reset while it is writing to the flash on the adapter, the flash
5043 * segment will have bad ECC and be zeroed.
5045 * Return value:
5046 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5048 static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd)
5050 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5051 int rc = IPR_RC_JOB_RETURN;
5053 if (!ipr_reset_allowed(ioa_cfg) && ipr_cmd->u.time_left) {
5054 ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
5055 ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
5056 } else {
5057 ipr_cmd->job_step = ipr_reset_start_bist;
5058 rc = IPR_RC_JOB_CONTINUE;
5061 return rc;
5065 * ipr_reset_alert_part2 - Alert the adapter of a pending reset
5066 * @ipr_cmd: ipr command struct
5068 * Description: This function alerts the adapter that it will be reset.
5069 * If memory space is not currently enabled, proceed directly
5070 * to running BIST on the adapter. The timer must always be started
5071 * so we guarantee we do not run BIST from ipr_isr.
5073 * Return value:
5074 * IPR_RC_JOB_RETURN
5076 static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd)
5078 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5079 u16 cmd_reg;
5080 int rc;
5082 ENTER;
5083 rc = pci_read_config_word(ioa_cfg->pdev, PCI_COMMAND, &cmd_reg);
5085 if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) {
5086 ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
5087 writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg);
5088 ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
5089 } else {
5090 ipr_cmd->job_step = ipr_reset_start_bist;
5093 ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT;
5094 ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
5096 LEAVE;
5097 return IPR_RC_JOB_RETURN;
5101 * ipr_reset_ucode_download_done - Microcode download completion
5102 * @ipr_cmd: ipr command struct
5104 * Description: This function unmaps the microcode download buffer.
5106 * Return value:
5107 * IPR_RC_JOB_CONTINUE
5109 static int ipr_reset_ucode_download_done(struct ipr_cmnd *ipr_cmd)
5111 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5112 struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
5114 pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist,
5115 sglist->num_sg, DMA_TO_DEVICE);
5117 ipr_cmd->job_step = ipr_reset_alert;
5118 return IPR_RC_JOB_CONTINUE;
5122 * ipr_reset_ucode_download - Download microcode to the adapter
5123 * @ipr_cmd: ipr command struct
5125 * Description: This function checks to see if it there is microcode
5126 * to download to the adapter. If there is, a download is performed.
5128 * Return value:
5129 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5131 static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd)
5133 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5134 struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
5136 ENTER;
5137 ipr_cmd->job_step = ipr_reset_alert;
5139 if (!sglist)
5140 return IPR_RC_JOB_CONTINUE;
5142 ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5143 ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5144 ipr_cmd->ioarcb.cmd_pkt.cdb[0] = WRITE_BUFFER;
5145 ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE;
5146 ipr_cmd->ioarcb.cmd_pkt.cdb[6] = (sglist->buffer_len & 0xff0000) >> 16;
5147 ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8;
5148 ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff;
5150 if (ipr_map_ucode_buffer(ipr_cmd, sglist, sglist->buffer_len)) {
5151 dev_err(&ioa_cfg->pdev->dev,
5152 "Failed to map microcode download buffer\n");
5153 return IPR_RC_JOB_CONTINUE;
5156 ipr_cmd->job_step = ipr_reset_ucode_download_done;
5158 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
5159 IPR_WRITE_BUFFER_TIMEOUT);
5161 LEAVE;
5162 return IPR_RC_JOB_RETURN;
5166 * ipr_reset_shutdown_ioa - Shutdown the adapter
5167 * @ipr_cmd: ipr command struct
5169 * Description: This function issues an adapter shutdown of the
5170 * specified type to the specified adapter as part of the
5171 * adapter reset job.
5173 * Return value:
5174 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5176 static int ipr_reset_shutdown_ioa(struct ipr_cmnd *ipr_cmd)
5178 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5179 enum ipr_shutdown_type shutdown_type = ipr_cmd->u.shutdown_type;
5180 unsigned long timeout;
5181 int rc = IPR_RC_JOB_CONTINUE;
5183 ENTER;
5184 if (shutdown_type != IPR_SHUTDOWN_NONE && !ioa_cfg->ioa_is_dead) {
5185 ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5186 ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5187 ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
5188 ipr_cmd->ioarcb.cmd_pkt.cdb[1] = shutdown_type;
5190 if (shutdown_type == IPR_SHUTDOWN_ABBREV)
5191 timeout = IPR_ABBREV_SHUTDOWN_TIMEOUT;
5192 else if (shutdown_type == IPR_SHUTDOWN_PREPARE_FOR_NORMAL)
5193 timeout = IPR_INTERNAL_TIMEOUT;
5194 else
5195 timeout = IPR_SHUTDOWN_TIMEOUT;
5197 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, timeout);
5199 rc = IPR_RC_JOB_RETURN;
5200 ipr_cmd->job_step = ipr_reset_ucode_download;
5201 } else
5202 ipr_cmd->job_step = ipr_reset_alert;
5204 LEAVE;
5205 return rc;
5209 * ipr_reset_ioa_job - Adapter reset job
5210 * @ipr_cmd: ipr command struct
5212 * Description: This function is the job router for the adapter reset job.
5214 * Return value:
5215 * none
5217 static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd)
5219 u32 rc, ioasc;
5220 unsigned long scratch = ipr_cmd->u.scratch;
5221 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5223 do {
5224 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
5226 if (ioa_cfg->reset_cmd != ipr_cmd) {
5228 * We are doing nested adapter resets and this is
5229 * not the current reset job.
5231 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5232 return;
5235 if (IPR_IOASC_SENSE_KEY(ioasc)) {
5236 dev_err(&ioa_cfg->pdev->dev,
5237 "0x%02X failed with IOASC: 0x%08X\n",
5238 ipr_cmd->ioarcb.cmd_pkt.cdb[0], ioasc);
5240 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
5241 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5242 return;
5245 ipr_reinit_ipr_cmnd(ipr_cmd);
5246 ipr_cmd->u.scratch = scratch;
5247 rc = ipr_cmd->job_step(ipr_cmd);
5248 } while(rc == IPR_RC_JOB_CONTINUE);
5252 * _ipr_initiate_ioa_reset - Initiate an adapter reset
5253 * @ioa_cfg: ioa config struct
5254 * @job_step: first job step of reset job
5255 * @shutdown_type: shutdown type
5257 * Description: This function will initiate the reset of the given adapter
5258 * starting at the selected job step.
5259 * If the caller needs to wait on the completion of the reset,
5260 * the caller must sleep on the reset_wait_q.
5262 * Return value:
5263 * none
5265 static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
5266 int (*job_step) (struct ipr_cmnd *),
5267 enum ipr_shutdown_type shutdown_type)
5269 struct ipr_cmnd *ipr_cmd;
5271 ioa_cfg->in_reset_reload = 1;
5272 ioa_cfg->allow_cmds = 0;
5273 scsi_block_requests(ioa_cfg->host);
5275 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
5276 ioa_cfg->reset_cmd = ipr_cmd;
5277 ipr_cmd->job_step = job_step;
5278 ipr_cmd->u.shutdown_type = shutdown_type;
5280 ipr_reset_ioa_job(ipr_cmd);
5284 * ipr_initiate_ioa_reset - Initiate an adapter reset
5285 * @ioa_cfg: ioa config struct
5286 * @shutdown_type: shutdown type
5288 * Description: This function will initiate the reset of the given adapter.
5289 * If the caller needs to wait on the completion of the reset,
5290 * the caller must sleep on the reset_wait_q.
5292 * Return value:
5293 * none
5295 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
5296 enum ipr_shutdown_type shutdown_type)
5298 if (ioa_cfg->ioa_is_dead)
5299 return;
5301 if (ioa_cfg->in_reset_reload && ioa_cfg->sdt_state == GET_DUMP)
5302 ioa_cfg->sdt_state = ABORT_DUMP;
5304 if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) {
5305 dev_err(&ioa_cfg->pdev->dev,
5306 "IOA taken offline - error recovery failed\n");
5308 ioa_cfg->reset_retries = 0;
5309 ioa_cfg->ioa_is_dead = 1;
5311 if (ioa_cfg->in_ioa_bringdown) {
5312 ioa_cfg->reset_cmd = NULL;
5313 ioa_cfg->in_reset_reload = 0;
5314 ipr_fail_all_ops(ioa_cfg);
5315 wake_up_all(&ioa_cfg->reset_wait_q);
5317 spin_unlock_irq(ioa_cfg->host->host_lock);
5318 scsi_unblock_requests(ioa_cfg->host);
5319 spin_lock_irq(ioa_cfg->host->host_lock);
5320 return;
5321 } else {
5322 ioa_cfg->in_ioa_bringdown = 1;
5323 shutdown_type = IPR_SHUTDOWN_NONE;
5327 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_shutdown_ioa,
5328 shutdown_type);
5332 * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
5333 * @ioa_cfg: ioa cfg struct
5335 * Description: This is the second phase of adapter intialization
5336 * This function takes care of initilizing the adapter to the point
5337 * where it can accept new commands.
5339 * Return value:
5340 * 0 on sucess / -EIO on failure
5342 static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
5344 int rc = 0;
5345 unsigned long host_lock_flags = 0;
5347 ENTER;
5348 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
5349 dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg);
5350 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa, IPR_SHUTDOWN_NONE);
5352 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
5353 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
5354 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
5356 if (ioa_cfg->ioa_is_dead) {
5357 rc = -EIO;
5358 } else if (ipr_invalid_adapter(ioa_cfg)) {
5359 if (!ipr_testmode)
5360 rc = -EIO;
5362 dev_err(&ioa_cfg->pdev->dev,
5363 "Adapter not supported in this hardware configuration.\n");
5366 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
5368 LEAVE;
5369 return rc;
5373 * ipr_free_cmd_blks - Frees command blocks allocated for an adapter
5374 * @ioa_cfg: ioa config struct
5376 * Return value:
5377 * none
5379 static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
5381 int i;
5383 for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
5384 if (ioa_cfg->ipr_cmnd_list[i])
5385 pci_pool_free(ioa_cfg->ipr_cmd_pool,
5386 ioa_cfg->ipr_cmnd_list[i],
5387 ioa_cfg->ipr_cmnd_list_dma[i]);
5389 ioa_cfg->ipr_cmnd_list[i] = NULL;
5392 if (ioa_cfg->ipr_cmd_pool)
5393 pci_pool_destroy (ioa_cfg->ipr_cmd_pool);
5395 ioa_cfg->ipr_cmd_pool = NULL;
5399 * ipr_free_mem - Frees memory allocated for an adapter
5400 * @ioa_cfg: ioa cfg struct
5402 * Return value:
5403 * nothing
5405 static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg)
5407 int i;
5409 kfree(ioa_cfg->res_entries);
5410 pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs),
5411 ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
5412 ipr_free_cmd_blks(ioa_cfg);
5413 pci_free_consistent(ioa_cfg->pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
5414 ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
5415 pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_config_table),
5416 ioa_cfg->cfg_table,
5417 ioa_cfg->cfg_table_dma);
5419 for (i = 0; i < IPR_NUM_HCAMS; i++) {
5420 pci_free_consistent(ioa_cfg->pdev,
5421 sizeof(struct ipr_hostrcb),
5422 ioa_cfg->hostrcb[i],
5423 ioa_cfg->hostrcb_dma[i]);
5426 ipr_free_dump(ioa_cfg);
5427 kfree(ioa_cfg->saved_mode_pages);
5428 kfree(ioa_cfg->trace);
5432 * ipr_free_all_resources - Free all allocated resources for an adapter.
5433 * @ipr_cmd: ipr command struct
5435 * This function frees all allocated resources for the
5436 * specified adapter.
5438 * Return value:
5439 * none
5441 static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg)
5443 struct pci_dev *pdev = ioa_cfg->pdev;
5445 ENTER;
5446 free_irq(pdev->irq, ioa_cfg);
5447 iounmap(ioa_cfg->hdw_dma_regs);
5448 pci_release_regions(pdev);
5449 ipr_free_mem(ioa_cfg);
5450 scsi_host_put(ioa_cfg->host);
5451 pci_disable_device(pdev);
5452 LEAVE;
5456 * ipr_alloc_cmd_blks - Allocate command blocks for an adapter
5457 * @ioa_cfg: ioa config struct
5459 * Return value:
5460 * 0 on success / -ENOMEM on allocation failure
5462 static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
5464 struct ipr_cmnd *ipr_cmd;
5465 struct ipr_ioarcb *ioarcb;
5466 dma_addr_t dma_addr;
5467 int i;
5469 ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev,
5470 sizeof(struct ipr_cmnd), 8, 0);
5472 if (!ioa_cfg->ipr_cmd_pool)
5473 return -ENOMEM;
5475 for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
5476 ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, SLAB_KERNEL, &dma_addr);
5478 if (!ipr_cmd) {
5479 ipr_free_cmd_blks(ioa_cfg);
5480 return -ENOMEM;
5483 memset(ipr_cmd, 0, sizeof(*ipr_cmd));
5484 ioa_cfg->ipr_cmnd_list[i] = ipr_cmd;
5485 ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr;
5487 ioarcb = &ipr_cmd->ioarcb;
5488 ioarcb->ioarcb_host_pci_addr = cpu_to_be32(dma_addr);
5489 ioarcb->host_response_handle = cpu_to_be32(i << 2);
5490 ioarcb->write_ioadl_addr =
5491 cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
5492 ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
5493 ioarcb->ioasa_host_pci_addr =
5494 cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa));
5495 ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa));
5496 ipr_cmd->cmd_index = i;
5497 ipr_cmd->ioa_cfg = ioa_cfg;
5498 ipr_cmd->sense_buffer_dma = dma_addr +
5499 offsetof(struct ipr_cmnd, sense_buffer);
5501 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5504 return 0;
5508 * ipr_alloc_mem - Allocate memory for an adapter
5509 * @ioa_cfg: ioa config struct
5511 * Return value:
5512 * 0 on success / non-zero for error
5514 static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
5516 struct pci_dev *pdev = ioa_cfg->pdev;
5517 int i, rc = -ENOMEM;
5519 ENTER;
5520 ioa_cfg->res_entries = kmalloc(sizeof(struct ipr_resource_entry) *
5521 IPR_MAX_PHYSICAL_DEVS, GFP_KERNEL);
5523 if (!ioa_cfg->res_entries)
5524 goto out;
5526 memset(ioa_cfg->res_entries, 0,
5527 sizeof(struct ipr_resource_entry) * IPR_MAX_PHYSICAL_DEVS);
5529 for (i = 0; i < IPR_MAX_PHYSICAL_DEVS; i++)
5530 list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q);
5532 ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev,
5533 sizeof(struct ipr_misc_cbs),
5534 &ioa_cfg->vpd_cbs_dma);
5536 if (!ioa_cfg->vpd_cbs)
5537 goto out_free_res_entries;
5539 if (ipr_alloc_cmd_blks(ioa_cfg))
5540 goto out_free_vpd_cbs;
5542 ioa_cfg->host_rrq = pci_alloc_consistent(ioa_cfg->pdev,
5543 sizeof(u32) * IPR_NUM_CMD_BLKS,
5544 &ioa_cfg->host_rrq_dma);
5546 if (!ioa_cfg->host_rrq)
5547 goto out_ipr_free_cmd_blocks;
5549 ioa_cfg->cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
5550 sizeof(struct ipr_config_table),
5551 &ioa_cfg->cfg_table_dma);
5553 if (!ioa_cfg->cfg_table)
5554 goto out_free_host_rrq;
5556 for (i = 0; i < IPR_NUM_HCAMS; i++) {
5557 ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev,
5558 sizeof(struct ipr_hostrcb),
5559 &ioa_cfg->hostrcb_dma[i]);
5561 if (!ioa_cfg->hostrcb[i])
5562 goto out_free_hostrcb_dma;
5564 ioa_cfg->hostrcb[i]->hostrcb_dma =
5565 ioa_cfg->hostrcb_dma[i] + offsetof(struct ipr_hostrcb, hcam);
5566 list_add_tail(&ioa_cfg->hostrcb[i]->queue, &ioa_cfg->hostrcb_free_q);
5569 ioa_cfg->trace = kmalloc(sizeof(struct ipr_trace_entry) *
5570 IPR_NUM_TRACE_ENTRIES, GFP_KERNEL);
5572 if (!ioa_cfg->trace)
5573 goto out_free_hostrcb_dma;
5575 memset(ioa_cfg->trace, 0,
5576 sizeof(struct ipr_trace_entry) * IPR_NUM_TRACE_ENTRIES);
5578 rc = 0;
5579 out:
5580 LEAVE;
5581 return rc;
5583 out_free_hostrcb_dma:
5584 while (i-- > 0) {
5585 pci_free_consistent(pdev, sizeof(struct ipr_hostrcb),
5586 ioa_cfg->hostrcb[i],
5587 ioa_cfg->hostrcb_dma[i]);
5589 pci_free_consistent(pdev, sizeof(struct ipr_config_table),
5590 ioa_cfg->cfg_table, ioa_cfg->cfg_table_dma);
5591 out_free_host_rrq:
5592 pci_free_consistent(pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
5593 ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
5594 out_ipr_free_cmd_blocks:
5595 ipr_free_cmd_blks(ioa_cfg);
5596 out_free_vpd_cbs:
5597 pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs),
5598 ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
5599 out_free_res_entries:
5600 kfree(ioa_cfg->res_entries);
5601 goto out;
5605 * ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values
5606 * @ioa_cfg: ioa config struct
5608 * Return value:
5609 * none
5611 static void __devinit ipr_initialize_bus_attr(struct ipr_ioa_cfg *ioa_cfg)
5613 int i;
5615 for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
5616 ioa_cfg->bus_attr[i].bus = i;
5617 ioa_cfg->bus_attr[i].qas_enabled = 0;
5618 ioa_cfg->bus_attr[i].bus_width = IPR_DEFAULT_BUS_WIDTH;
5619 if (ipr_max_speed < ARRAY_SIZE(ipr_max_bus_speeds))
5620 ioa_cfg->bus_attr[i].max_xfer_rate = ipr_max_bus_speeds[ipr_max_speed];
5621 else
5622 ioa_cfg->bus_attr[i].max_xfer_rate = IPR_U160_SCSI_RATE;
5627 * ipr_init_ioa_cfg - Initialize IOA config struct
5628 * @ioa_cfg: ioa config struct
5629 * @host: scsi host struct
5630 * @pdev: PCI dev struct
5632 * Return value:
5633 * none
5635 static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
5636 struct Scsi_Host *host, struct pci_dev *pdev)
5638 const struct ipr_interrupt_offsets *p;
5639 struct ipr_interrupts *t;
5640 void __iomem *base;
5642 ioa_cfg->host = host;
5643 ioa_cfg->pdev = pdev;
5644 ioa_cfg->log_level = ipr_log_level;
5645 sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER);
5646 sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL);
5647 sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL);
5648 sprintf(ioa_cfg->ipr_pending_label, IPR_PENDQ_LABEL);
5649 sprintf(ioa_cfg->cfg_table_start, IPR_CFG_TBL_START);
5650 sprintf(ioa_cfg->resource_table_label, IPR_RES_TABLE_LABEL);
5651 sprintf(ioa_cfg->ipr_hcam_label, IPR_HCAM_LABEL);
5652 sprintf(ioa_cfg->ipr_cmd_label, IPR_CMD_LABEL);
5654 INIT_LIST_HEAD(&ioa_cfg->free_q);
5655 INIT_LIST_HEAD(&ioa_cfg->pending_q);
5656 INIT_LIST_HEAD(&ioa_cfg->hostrcb_free_q);
5657 INIT_LIST_HEAD(&ioa_cfg->hostrcb_pending_q);
5658 INIT_LIST_HEAD(&ioa_cfg->free_res_q);
5659 INIT_LIST_HEAD(&ioa_cfg->used_res_q);
5660 INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread, ioa_cfg);
5661 init_waitqueue_head(&ioa_cfg->reset_wait_q);
5662 ioa_cfg->sdt_state = INACTIVE;
5664 ipr_initialize_bus_attr(ioa_cfg);
5666 host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
5667 host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
5668 host->max_channel = IPR_MAX_BUS_TO_SCAN;
5669 host->unique_id = host->host_no;
5670 host->max_cmd_len = IPR_MAX_CDB_LEN;
5671 pci_set_drvdata(pdev, ioa_cfg);
5673 p = &ioa_cfg->chip_cfg->regs;
5674 t = &ioa_cfg->regs;
5675 base = ioa_cfg->hdw_dma_regs;
5677 t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg;
5678 t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg;
5679 t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg;
5680 t->clr_interrupt_reg = base + p->clr_interrupt_reg;
5681 t->sense_interrupt_reg = base + p->sense_interrupt_reg;
5682 t->ioarrin_reg = base + p->ioarrin_reg;
5683 t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg;
5684 t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg;
5685 t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg;
5689 * ipr_get_chip_cfg - Find adapter chip configuration
5690 * @dev_id: PCI device id struct
5692 * Return value:
5693 * ptr to chip config on success / NULL on failure
5695 static const struct ipr_chip_cfg_t * __devinit
5696 ipr_get_chip_cfg(const struct pci_device_id *dev_id)
5698 int i;
5700 if (dev_id->driver_data)
5701 return (const struct ipr_chip_cfg_t *)dev_id->driver_data;
5703 for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
5704 if (ipr_chip[i].vendor == dev_id->vendor &&
5705 ipr_chip[i].device == dev_id->device)
5706 return ipr_chip[i].cfg;
5707 return NULL;
5711 * ipr_probe_ioa - Allocates memory and does first stage of initialization
5712 * @pdev: PCI device struct
5713 * @dev_id: PCI device id struct
5715 * Return value:
5716 * 0 on success / non-zero on failure
5718 static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
5719 const struct pci_device_id *dev_id)
5721 struct ipr_ioa_cfg *ioa_cfg;
5722 struct Scsi_Host *host;
5723 unsigned long ipr_regs_pci;
5724 void __iomem *ipr_regs;
5725 u32 rc = PCIBIOS_SUCCESSFUL;
5727 ENTER;
5729 if ((rc = pci_enable_device(pdev))) {
5730 dev_err(&pdev->dev, "Cannot enable adapter\n");
5731 goto out;
5734 dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
5736 host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
5738 if (!host) {
5739 dev_err(&pdev->dev, "call to scsi_host_alloc failed!\n");
5740 rc = -ENOMEM;
5741 goto out_disable;
5744 ioa_cfg = (struct ipr_ioa_cfg *)host->hostdata;
5745 memset(ioa_cfg, 0, sizeof(struct ipr_ioa_cfg));
5747 ioa_cfg->chip_cfg = ipr_get_chip_cfg(dev_id);
5749 if (!ioa_cfg->chip_cfg) {
5750 dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n",
5751 dev_id->vendor, dev_id->device);
5752 goto out_scsi_host_put;
5755 ipr_regs_pci = pci_resource_start(pdev, 0);
5757 rc = pci_request_regions(pdev, IPR_NAME);
5758 if (rc < 0) {
5759 dev_err(&pdev->dev,
5760 "Couldn't register memory range of registers\n");
5761 goto out_scsi_host_put;
5764 ipr_regs = ioremap(ipr_regs_pci, pci_resource_len(pdev, 0));
5766 if (!ipr_regs) {
5767 dev_err(&pdev->dev,
5768 "Couldn't map memory range of registers\n");
5769 rc = -ENOMEM;
5770 goto out_release_regions;
5773 ioa_cfg->hdw_dma_regs = ipr_regs;
5774 ioa_cfg->hdw_dma_regs_pci = ipr_regs_pci;
5775 ioa_cfg->ioa_mailbox = ioa_cfg->chip_cfg->mailbox + ipr_regs;
5777 ipr_init_ioa_cfg(ioa_cfg, host, pdev);
5779 pci_set_master(pdev);
5781 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
5782 if (rc < 0) {
5783 dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
5784 goto cleanup_nomem;
5787 rc = pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
5788 ioa_cfg->chip_cfg->cache_line_size);
5790 if (rc != PCIBIOS_SUCCESSFUL) {
5791 dev_err(&pdev->dev, "Write of cache line size failed\n");
5792 rc = -EIO;
5793 goto cleanup_nomem;
5796 /* Save away PCI config space for use following IOA reset */
5797 rc = pci_save_state(pdev);
5799 if (rc != PCIBIOS_SUCCESSFUL) {
5800 dev_err(&pdev->dev, "Failed to save PCI config space\n");
5801 rc = -EIO;
5802 goto cleanup_nomem;
5805 if ((rc = ipr_save_pcix_cmd_reg(ioa_cfg)))
5806 goto cleanup_nomem;
5808 if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg)))
5809 goto cleanup_nomem;
5811 rc = ipr_alloc_mem(ioa_cfg);
5812 if (rc < 0) {
5813 dev_err(&pdev->dev,
5814 "Couldn't allocate enough memory for device driver!\n");
5815 goto cleanup_nomem;
5818 ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
5819 rc = request_irq(pdev->irq, ipr_isr, SA_SHIRQ, IPR_NAME, ioa_cfg);
5821 if (rc) {
5822 dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
5823 pdev->irq, rc);
5824 goto cleanup_nolog;
5827 spin_lock(&ipr_driver_lock);
5828 list_add_tail(&ioa_cfg->queue, &ipr_ioa_head);
5829 spin_unlock(&ipr_driver_lock);
5831 LEAVE;
5832 out:
5833 return rc;
5835 cleanup_nolog:
5836 ipr_free_mem(ioa_cfg);
5837 cleanup_nomem:
5838 iounmap(ipr_regs);
5839 out_release_regions:
5840 pci_release_regions(pdev);
5841 out_scsi_host_put:
5842 scsi_host_put(host);
5843 out_disable:
5844 pci_disable_device(pdev);
5845 goto out;
5849 * ipr_scan_vsets - Scans for VSET devices
5850 * @ioa_cfg: ioa config struct
5852 * Description: Since the VSET resources do not follow SAM in that we can have
5853 * sparse LUNs with no LUN 0, we have to scan for these ourselves.
5855 * Return value:
5856 * none
5858 static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg)
5860 int target, lun;
5862 for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++)
5863 for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++ )
5864 scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun);
5868 * ipr_initiate_ioa_bringdown - Bring down an adapter
5869 * @ioa_cfg: ioa config struct
5870 * @shutdown_type: shutdown type
5872 * Description: This function will initiate bringing down the adapter.
5873 * This consists of issuing an IOA shutdown to the adapter
5874 * to flush the cache, and running BIST.
5875 * If the caller needs to wait on the completion of the reset,
5876 * the caller must sleep on the reset_wait_q.
5878 * Return value:
5879 * none
5881 static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg *ioa_cfg,
5882 enum ipr_shutdown_type shutdown_type)
5884 ENTER;
5885 if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
5886 ioa_cfg->sdt_state = ABORT_DUMP;
5887 ioa_cfg->reset_retries = 0;
5888 ioa_cfg->in_ioa_bringdown = 1;
5889 ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
5890 LEAVE;
5894 * __ipr_remove - Remove a single adapter
5895 * @pdev: pci device struct
5897 * Adapter hot plug remove entry point.
5899 * Return value:
5900 * none
5902 static void __ipr_remove(struct pci_dev *pdev)
5904 unsigned long host_lock_flags = 0;
5905 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
5906 ENTER;
5908 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
5909 ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
5911 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
5912 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
5913 flush_scheduled_work();
5914 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
5916 spin_lock(&ipr_driver_lock);
5917 list_del(&ioa_cfg->queue);
5918 spin_unlock(&ipr_driver_lock);
5920 if (ioa_cfg->sdt_state == ABORT_DUMP)
5921 ioa_cfg->sdt_state = WAIT_FOR_DUMP;
5922 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
5924 ipr_free_all_resources(ioa_cfg);
5926 LEAVE;
5930 * ipr_remove - IOA hot plug remove entry point
5931 * @pdev: pci device struct
5933 * Adapter hot plug remove entry point.
5935 * Return value:
5936 * none
5938 static void ipr_remove(struct pci_dev *pdev)
5940 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
5942 ENTER;
5944 ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj,
5945 &ipr_trace_attr);
5946 ipr_remove_dump_file(&ioa_cfg->host->shost_classdev.kobj,
5947 &ipr_dump_attr);
5948 scsi_remove_host(ioa_cfg->host);
5950 __ipr_remove(pdev);
5952 LEAVE;
5956 * ipr_probe - Adapter hot plug add entry point
5958 * Return value:
5959 * 0 on success / non-zero on failure
5961 static int __devinit ipr_probe(struct pci_dev *pdev,
5962 const struct pci_device_id *dev_id)
5964 struct ipr_ioa_cfg *ioa_cfg;
5965 int rc;
5967 rc = ipr_probe_ioa(pdev, dev_id);
5969 if (rc)
5970 return rc;
5972 ioa_cfg = pci_get_drvdata(pdev);
5973 rc = ipr_probe_ioa_part2(ioa_cfg);
5975 if (rc) {
5976 __ipr_remove(pdev);
5977 return rc;
5980 rc = scsi_add_host(ioa_cfg->host, &pdev->dev);
5982 if (rc) {
5983 __ipr_remove(pdev);
5984 return rc;
5987 rc = ipr_create_trace_file(&ioa_cfg->host->shost_classdev.kobj,
5988 &ipr_trace_attr);
5990 if (rc) {
5991 scsi_remove_host(ioa_cfg->host);
5992 __ipr_remove(pdev);
5993 return rc;
5996 rc = ipr_create_dump_file(&ioa_cfg->host->shost_classdev.kobj,
5997 &ipr_dump_attr);
5999 if (rc) {
6000 ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj,
6001 &ipr_trace_attr);
6002 scsi_remove_host(ioa_cfg->host);
6003 __ipr_remove(pdev);
6004 return rc;
6007 scsi_scan_host(ioa_cfg->host);
6008 ipr_scan_vsets(ioa_cfg);
6009 scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN);
6010 ioa_cfg->allow_ml_add_del = 1;
6011 schedule_work(&ioa_cfg->work_q);
6012 return 0;
6016 * ipr_shutdown - Shutdown handler.
6017 * @pdev: pci device struct
6019 * This function is invoked upon system shutdown/reboot. It will issue
6020 * an adapter shutdown to the adapter to flush the write cache.
6022 * Return value:
6023 * none
6025 static void ipr_shutdown(struct pci_dev *pdev)
6027 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6028 unsigned long lock_flags = 0;
6030 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
6031 ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
6032 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
6033 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
6036 static struct pci_device_id ipr_pci_table[] __devinitdata = {
6037 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
6038 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702,
6039 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6040 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
6041 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703,
6042 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6043 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
6044 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D,
6045 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6046 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
6047 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E,
6048 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6049 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
6050 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B,
6051 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6052 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
6053 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E,
6054 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6055 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
6056 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A,
6057 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
6058 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
6059 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780,
6060 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
6061 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
6062 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E,
6063 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
6066 MODULE_DEVICE_TABLE(pci, ipr_pci_table);
6068 static struct pci_driver ipr_driver = {
6069 .name = IPR_NAME,
6070 .id_table = ipr_pci_table,
6071 .probe = ipr_probe,
6072 .remove = ipr_remove,
6073 .shutdown = ipr_shutdown,
6077 * ipr_init - Module entry point
6079 * Return value:
6080 * 0 on success / negative value on failure
6082 static int __init ipr_init(void)
6084 ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
6085 IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
6087 return pci_module_init(&ipr_driver);
6091 * ipr_exit - Module unload
6093 * Module unload entry point.
6095 * Return value:
6096 * none
6098 static void __exit ipr_exit(void)
6100 pci_unregister_driver(&ipr_driver);
6103 module_init(ipr_init);
6104 module_exit(ipr_exit);