2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
36 #include <linux/kernel.h>
37 #include <linux/mii.h>
38 #include <linux/module.h>
39 #include <linux/netdevice.h>
40 #include <linux/device.h>
41 #include <linux/pci.h>
42 #include <linux/skbuff.h>
43 #include <linux/slab.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <linux/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION
);
61 static int rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_DEFAULT
;
62 static int tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_DEFAULT
;
64 module_param(rx_descriptors
, int, 0444);
65 module_param(tx_descriptors
, int, 0444);
67 MODULE_PARM_DESC(rx_descriptors
, "number of descriptors used " \
69 MODULE_PARM_DESC(tx_descriptors
, "number of descriptors used " \
72 char spider_net_driver_name
[] = "spidernet";
74 static struct pci_device_id spider_net_pci_tbl
[] = {
75 { PCI_VENDOR_ID_TOSHIBA_2
, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET
,
76 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0UL },
80 MODULE_DEVICE_TABLE(pci
, spider_net_pci_tbl
);
83 * spider_net_read_reg - reads an SMMIO register of a card
84 * @card: device structure
85 * @reg: register to read from
87 * returns the content of the specified SMMIO register.
90 spider_net_read_reg(struct spider_net_card
*card
, u32 reg
)
92 /* We use the powerpc specific variants instead of readl_be() because
93 * we know spidernet is not a real PCI device and we can thus avoid the
94 * performance hit caused by the PCI workarounds.
96 return in_be32(card
->regs
+ reg
);
100 * spider_net_write_reg - writes to an SMMIO register of a card
101 * @card: device structure
102 * @reg: register to write to
103 * @value: value to write into the specified SMMIO register
106 spider_net_write_reg(struct spider_net_card
*card
, u32 reg
, u32 value
)
108 /* We use the powerpc specific variants instead of writel_be() because
109 * we know spidernet is not a real PCI device and we can thus avoid the
110 * performance hit caused by the PCI workarounds.
112 out_be32(card
->regs
+ reg
, value
);
115 /** spider_net_write_phy - write to phy register
116 * @netdev: adapter to be written to
119 * @val: value to be written to phy register
121 * spider_net_write_phy_register writes to an arbitrary PHY
122 * register via the spider GPCWOPCMD register. We assume the queue does
123 * not run full (not more than 15 commands outstanding).
126 spider_net_write_phy(struct net_device
*netdev
, int mii_id
,
129 struct spider_net_card
*card
= netdev_priv(netdev
);
132 writevalue
= ((u32
)mii_id
<< 21) |
133 ((u32
)reg
<< 16) | ((u32
)val
);
135 spider_net_write_reg(card
, SPIDER_NET_GPCWOPCMD
, writevalue
);
138 /** spider_net_read_phy - read from phy register
139 * @netdev: network device to be read from
143 * Returns value read from PHY register
145 * spider_net_write_phy reads from an arbitrary PHY
146 * register via the spider GPCROPCMD register
149 spider_net_read_phy(struct net_device
*netdev
, int mii_id
, int reg
)
151 struct spider_net_card
*card
= netdev_priv(netdev
);
154 readvalue
= ((u32
)mii_id
<< 21) | ((u32
)reg
<< 16);
155 spider_net_write_reg(card
, SPIDER_NET_GPCROPCMD
, readvalue
);
157 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
158 * interrupt, as we poll for the completion of the read operation
159 * in spider_net_read_phy. Should take about 50 us */
161 readvalue
= spider_net_read_reg(card
, SPIDER_NET_GPCROPCMD
);
162 } while (readvalue
& SPIDER_NET_GPREXEC
);
164 readvalue
&= SPIDER_NET_GPRDAT_MASK
;
170 * spider_net_setup_aneg - initial auto-negotiation setup
171 * @card: device structure
174 spider_net_setup_aneg(struct spider_net_card
*card
)
176 struct mii_phy
*phy
= &card
->phy
;
180 bmsr
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
181 estat
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_ESTATUS
);
183 if (bmsr
& BMSR_10HALF
)
184 advertise
|= ADVERTISED_10baseT_Half
;
185 if (bmsr
& BMSR_10FULL
)
186 advertise
|= ADVERTISED_10baseT_Full
;
187 if (bmsr
& BMSR_100HALF
)
188 advertise
|= ADVERTISED_100baseT_Half
;
189 if (bmsr
& BMSR_100FULL
)
190 advertise
|= ADVERTISED_100baseT_Full
;
192 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_TFULL
))
193 advertise
|= SUPPORTED_1000baseT_Full
;
194 if ((bmsr
& BMSR_ESTATEN
) && (estat
& ESTATUS_1000_THALF
))
195 advertise
|= SUPPORTED_1000baseT_Half
;
197 mii_phy_probe(phy
, phy
->mii_id
);
198 phy
->def
->ops
->setup_aneg(phy
, advertise
);
203 * spider_net_rx_irq_off - switch off rx irq on this spider card
204 * @card: device structure
206 * switches off rx irq by masking them out in the GHIINTnMSK register
209 spider_net_rx_irq_off(struct spider_net_card
*card
)
213 regvalue
= SPIDER_NET_INT0_MASK_VALUE
& (~SPIDER_NET_RXINT
);
214 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
218 * spider_net_rx_irq_on - switch on rx irq on this spider card
219 * @card: device structure
221 * switches on rx irq by enabling them in the GHIINTnMSK register
224 spider_net_rx_irq_on(struct spider_net_card
*card
)
228 regvalue
= SPIDER_NET_INT0_MASK_VALUE
| SPIDER_NET_RXINT
;
229 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, regvalue
);
233 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
234 * @card: card structure
236 * spider_net_set_promisc sets the unicast destination address filter and
237 * thus either allows for non-promisc mode or promisc mode
240 spider_net_set_promisc(struct spider_net_card
*card
)
243 struct net_device
*netdev
= card
->netdev
;
245 if (netdev
->flags
& IFF_PROMISC
) {
246 /* clear destination entry 0 */
247 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, 0);
248 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, 0);
249 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
250 SPIDER_NET_PROMISC_VALUE
);
252 macu
= netdev
->dev_addr
[0];
254 macu
|= netdev
->dev_addr
[1];
255 memcpy(&macl
, &netdev
->dev_addr
[2], sizeof(macl
));
257 macu
|= SPIDER_NET_UA_DESCR_VALUE
;
258 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
, macu
);
259 spider_net_write_reg(card
, SPIDER_NET_GMRUAFILnR
+ 0x04, macl
);
260 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
,
261 SPIDER_NET_NONPROMISC_VALUE
);
266 * spider_net_get_mac_address - read mac address from spider card
267 * @card: device structure
269 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
272 spider_net_get_mac_address(struct net_device
*netdev
)
274 struct spider_net_card
*card
= netdev_priv(netdev
);
277 macl
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACL
);
278 macu
= spider_net_read_reg(card
, SPIDER_NET_GMACUNIMACU
);
280 netdev
->dev_addr
[0] = (macu
>> 24) & 0xff;
281 netdev
->dev_addr
[1] = (macu
>> 16) & 0xff;
282 netdev
->dev_addr
[2] = (macu
>> 8) & 0xff;
283 netdev
->dev_addr
[3] = macu
& 0xff;
284 netdev
->dev_addr
[4] = (macl
>> 8) & 0xff;
285 netdev
->dev_addr
[5] = macl
& 0xff;
287 if (!is_valid_ether_addr(&netdev
->dev_addr
[0]))
294 * spider_net_get_descr_status -- returns the status of a descriptor
295 * @descr: descriptor to look at
297 * returns the status as in the dmac_cmd_status field of the descriptor
300 spider_net_get_descr_status(struct spider_net_hw_descr
*hwdescr
)
302 return hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_IND_PROC_MASK
;
306 * spider_net_free_chain - free descriptor chain
307 * @card: card structure
308 * @chain: address of chain
312 spider_net_free_chain(struct spider_net_card
*card
,
313 struct spider_net_descr_chain
*chain
)
315 struct spider_net_descr
*descr
;
320 descr
->hwdescr
->next_descr_addr
= 0;
322 } while (descr
!= chain
->ring
);
324 dma_free_coherent(&card
->pdev
->dev
, chain
->num_desc
,
325 chain
->hwring
, chain
->dma_addr
);
329 * spider_net_init_chain - alloc and link descriptor chain
330 * @card: card structure
331 * @chain: address of chain
333 * We manage a circular list that mirrors the hardware structure,
334 * except that the hardware uses bus addresses.
336 * Returns 0 on success, <0 on failure
339 spider_net_init_chain(struct spider_net_card
*card
,
340 struct spider_net_descr_chain
*chain
)
343 struct spider_net_descr
*descr
;
344 struct spider_net_hw_descr
*hwdescr
;
348 alloc_size
= chain
->num_desc
* sizeof(struct spider_net_hw_descr
);
350 chain
->hwring
= dma_alloc_coherent(&card
->pdev
->dev
, alloc_size
,
351 &chain
->dma_addr
, GFP_KERNEL
);
356 memset(chain
->ring
, 0, chain
->num_desc
* sizeof(struct spider_net_descr
));
358 /* Set up the hardware pointers in each descriptor */
360 hwdescr
= chain
->hwring
;
361 buf
= chain
->dma_addr
;
362 for (i
=0; i
< chain
->num_desc
; i
++, descr
++, hwdescr
++) {
363 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
364 hwdescr
->next_descr_addr
= 0;
366 descr
->hwdescr
= hwdescr
;
367 descr
->bus_addr
= buf
;
368 descr
->next
= descr
+ 1;
369 descr
->prev
= descr
- 1;
371 buf
+= sizeof(struct spider_net_hw_descr
);
373 /* do actual circular list */
374 (descr
-1)->next
= chain
->ring
;
375 chain
->ring
->prev
= descr
-1;
377 spin_lock_init(&chain
->lock
);
378 chain
->head
= chain
->ring
;
379 chain
->tail
= chain
->ring
;
384 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
385 * @card: card structure
387 * returns 0 on success, <0 on failure
390 spider_net_free_rx_chain_contents(struct spider_net_card
*card
)
392 struct spider_net_descr
*descr
;
394 descr
= card
->rx_chain
.head
;
397 pci_unmap_single(card
->pdev
, descr
->hwdescr
->buf_addr
,
398 SPIDER_NET_MAX_FRAME
,
399 PCI_DMA_BIDIRECTIONAL
);
400 dev_kfree_skb(descr
->skb
);
404 } while (descr
!= card
->rx_chain
.head
);
408 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
409 * @card: card structure
410 * @descr: descriptor to re-init
412 * Return 0 on succes, <0 on failure.
414 * Allocates a new rx skb, iommu-maps it and attaches it to the
415 * descriptor. Mark the descriptor as activated, ready-to-use.
418 spider_net_prepare_rx_descr(struct spider_net_card
*card
,
419 struct spider_net_descr
*descr
)
421 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
426 /* we need to round up the buffer size to a multiple of 128 */
427 bufsize
= (SPIDER_NET_MAX_FRAME
+ SPIDER_NET_RXBUF_ALIGN
- 1) &
428 (~(SPIDER_NET_RXBUF_ALIGN
- 1));
430 /* and we need to have it 128 byte aligned, therefore we allocate a
432 /* allocate an skb */
433 descr
->skb
= netdev_alloc_skb(card
->netdev
,
434 bufsize
+ SPIDER_NET_RXBUF_ALIGN
- 1);
436 if (netif_msg_rx_err(card
) && net_ratelimit())
437 dev_err(&card
->netdev
->dev
,
438 "Not enough memory to allocate rx buffer\n");
439 card
->spider_stats
.alloc_rx_skb_error
++;
442 hwdescr
->buf_size
= bufsize
;
443 hwdescr
->result_size
= 0;
444 hwdescr
->valid_size
= 0;
445 hwdescr
->data_status
= 0;
446 hwdescr
->data_error
= 0;
448 offset
= ((unsigned long)descr
->skb
->data
) &
449 (SPIDER_NET_RXBUF_ALIGN
- 1);
451 skb_reserve(descr
->skb
, SPIDER_NET_RXBUF_ALIGN
- offset
);
452 /* iommu-map the skb */
453 buf
= pci_map_single(card
->pdev
, descr
->skb
->data
,
454 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
455 if (pci_dma_mapping_error(card
->pdev
, buf
)) {
456 dev_kfree_skb_any(descr
->skb
);
458 if (netif_msg_rx_err(card
) && net_ratelimit())
459 dev_err(&card
->netdev
->dev
, "Could not iommu-map rx buffer\n");
460 card
->spider_stats
.rx_iommu_map_error
++;
461 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
463 hwdescr
->buf_addr
= buf
;
465 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_CARDOWNED
|
466 SPIDER_NET_DMAC_NOINTR_COMPLETE
;
473 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
474 * @card: card structure
476 * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
477 * chip by writing to the appropriate register. DMA is enabled in
478 * spider_net_enable_rxdmac.
481 spider_net_enable_rxchtails(struct spider_net_card
*card
)
483 /* assume chain is aligned correctly */
484 spider_net_write_reg(card
, SPIDER_NET_GDADCHA
,
485 card
->rx_chain
.tail
->bus_addr
);
489 * spider_net_enable_rxdmac - enables a receive DMA controller
490 * @card: card structure
492 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
493 * in the GDADMACCNTR register
496 spider_net_enable_rxdmac(struct spider_net_card
*card
)
499 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
500 SPIDER_NET_DMA_RX_VALUE
);
504 * spider_net_disable_rxdmac - disables the receive DMA controller
505 * @card: card structure
507 * spider_net_disable_rxdmac terminates processing on the DMA controller
508 * by turing off the DMA controller, with the force-end flag set.
511 spider_net_disable_rxdmac(struct spider_net_card
*card
)
513 spider_net_write_reg(card
, SPIDER_NET_GDADMACCNTR
,
514 SPIDER_NET_DMA_RX_FEND_VALUE
);
518 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
519 * @card: card structure
521 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
524 spider_net_refill_rx_chain(struct spider_net_card
*card
)
526 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
529 /* one context doing the refill (and a second context seeing that
530 * and omitting it) is ok. If called by NAPI, we'll be called again
531 * as spider_net_decode_one_descr is called several times. If some
532 * interrupt calls us, the NAPI is about to clean up anyway. */
533 if (!spin_trylock_irqsave(&chain
->lock
, flags
))
536 while (spider_net_get_descr_status(chain
->head
->hwdescr
) ==
537 SPIDER_NET_DESCR_NOT_IN_USE
) {
538 if (spider_net_prepare_rx_descr(card
, chain
->head
))
540 chain
->head
= chain
->head
->next
;
543 spin_unlock_irqrestore(&chain
->lock
, flags
);
547 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
548 * @card: card structure
550 * Returns 0 on success, <0 on failure.
553 spider_net_alloc_rx_skbs(struct spider_net_card
*card
)
555 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
556 struct spider_net_descr
*start
= chain
->tail
;
557 struct spider_net_descr
*descr
= start
;
559 /* Link up the hardware chain pointers */
561 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
563 } while (descr
!= start
);
565 /* Put at least one buffer into the chain. if this fails,
566 * we've got a problem. If not, spider_net_refill_rx_chain
567 * will do the rest at the end of this function. */
568 if (spider_net_prepare_rx_descr(card
, chain
->head
))
571 chain
->head
= chain
->head
->next
;
573 /* This will allocate the rest of the rx buffers;
574 * if not, it's business as usual later on. */
575 spider_net_refill_rx_chain(card
);
576 spider_net_enable_rxdmac(card
);
580 spider_net_free_rx_chain_contents(card
);
585 * spider_net_get_multicast_hash - generates hash for multicast filter table
586 * @addr: multicast address
588 * returns the hash value.
590 * spider_net_get_multicast_hash calculates a hash value for a given multicast
591 * address, that is used to set the multicast filter tables
594 spider_net_get_multicast_hash(struct net_device
*netdev
, __u8
*addr
)
598 char addr_for_crc
[ETH_ALEN
] = { 0, };
601 for (i
= 0; i
< ETH_ALEN
* 8; i
++) {
602 bit
= (addr
[i
/ 8] >> (i
% 8)) & 1;
603 addr_for_crc
[ETH_ALEN
- 1 - i
/ 8] += bit
<< (7 - (i
% 8));
606 crc
= crc32_be(~0, addr_for_crc
, netdev
->addr_len
);
617 * spider_net_set_multi - sets multicast addresses and promisc flags
618 * @netdev: interface device structure
620 * spider_net_set_multi configures multicast addresses as needed for the
621 * netdev interface. It also sets up multicast, allmulti and promisc
622 * flags appropriately
625 spider_net_set_multi(struct net_device
*netdev
)
627 struct dev_mc_list
*mc
;
631 struct spider_net_card
*card
= netdev_priv(netdev
);
632 unsigned long bitmask
[SPIDER_NET_MULTICAST_HASHES
/ BITS_PER_LONG
] =
635 spider_net_set_promisc(card
);
637 if (netdev
->flags
& IFF_ALLMULTI
) {
638 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
; i
++) {
644 /* well, we know, what the broadcast hash value is: it's xfd
645 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
646 set_bit(0xfd, bitmask
);
648 for (mc
= netdev
->mc_list
; mc
; mc
= mc
->next
) {
649 hash
= spider_net_get_multicast_hash(netdev
, mc
->dmi_addr
);
650 set_bit(hash
, bitmask
);
654 for (i
= 0; i
< SPIDER_NET_MULTICAST_HASHES
/ 4; i
++) {
656 if (test_bit(i
* 4, bitmask
))
659 if (test_bit(i
* 4 + 1, bitmask
))
662 if (test_bit(i
* 4 + 2, bitmask
))
665 if (test_bit(i
* 4 + 3, bitmask
))
668 spider_net_write_reg(card
, SPIDER_NET_GMRMHFILnR
+ i
* 4, reg
);
673 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
674 * @card: card structure
675 * @descr: descriptor structure to fill out
676 * @skb: packet to use
678 * returns 0 on success, <0 on failure.
680 * fills out the descriptor structure with skb data and len. Copies data,
681 * if needed (32bit DMA!)
684 spider_net_prepare_tx_descr(struct spider_net_card
*card
,
687 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
688 struct spider_net_descr
*descr
;
689 struct spider_net_hw_descr
*hwdescr
;
693 buf
= pci_map_single(card
->pdev
, skb
->data
, skb
->len
, PCI_DMA_TODEVICE
);
694 if (pci_dma_mapping_error(card
->pdev
, buf
)) {
695 if (netif_msg_tx_err(card
) && net_ratelimit())
696 dev_err(&card
->netdev
->dev
, "could not iommu-map packet (%p, %i). "
697 "Dropping packet\n", skb
->data
, skb
->len
);
698 card
->spider_stats
.tx_iommu_map_error
++;
702 spin_lock_irqsave(&chain
->lock
, flags
);
703 descr
= card
->tx_chain
.head
;
704 if (descr
->next
== chain
->tail
->prev
) {
705 spin_unlock_irqrestore(&chain
->lock
, flags
);
706 pci_unmap_single(card
->pdev
, buf
, skb
->len
, PCI_DMA_TODEVICE
);
709 hwdescr
= descr
->hwdescr
;
710 chain
->head
= descr
->next
;
713 hwdescr
->buf_addr
= buf
;
714 hwdescr
->buf_size
= skb
->len
;
715 hwdescr
->next_descr_addr
= 0;
716 hwdescr
->data_status
= 0;
718 hwdescr
->dmac_cmd_status
=
719 SPIDER_NET_DESCR_CARDOWNED
| SPIDER_NET_DMAC_TXFRMTL
;
720 spin_unlock_irqrestore(&chain
->lock
, flags
);
722 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
723 switch (ip_hdr(skb
)->protocol
) {
725 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_TCP
;
728 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DMAC_UDP
;
732 /* Chain the bus address, so that the DMA engine finds this descr. */
734 descr
->prev
->hwdescr
->next_descr_addr
= descr
->bus_addr
;
736 card
->netdev
->trans_start
= jiffies
; /* set netdev watchdog timer */
741 spider_net_set_low_watermark(struct spider_net_card
*card
)
743 struct spider_net_descr
*descr
= card
->tx_chain
.tail
;
744 struct spider_net_hw_descr
*hwdescr
;
750 /* Measure the length of the queue. Measurement does not
751 * need to be precise -- does not need a lock. */
752 while (descr
!= card
->tx_chain
.head
) {
753 status
= descr
->hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_NOT_IN_USE
;
754 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
760 /* If TX queue is short, don't even bother with interrupts */
761 if (cnt
< card
->tx_chain
.num_desc
/4)
764 /* Set low-watermark 3/4th's of the way into the queue. */
765 descr
= card
->tx_chain
.tail
;
770 /* Set the new watermark, clear the old watermark */
771 spin_lock_irqsave(&card
->tx_chain
.lock
, flags
);
772 descr
->hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_TXDESFLG
;
773 if (card
->low_watermark
&& card
->low_watermark
!= descr
) {
774 hwdescr
= card
->low_watermark
->hwdescr
;
775 hwdescr
->dmac_cmd_status
=
776 hwdescr
->dmac_cmd_status
& ~SPIDER_NET_DESCR_TXDESFLG
;
778 card
->low_watermark
= descr
;
779 spin_unlock_irqrestore(&card
->tx_chain
.lock
, flags
);
784 * spider_net_release_tx_chain - processes sent tx descriptors
785 * @card: adapter structure
786 * @brutal: if set, don't care about whether descriptor seems to be in use
788 * returns 0 if the tx ring is empty, otherwise 1.
790 * spider_net_release_tx_chain releases the tx descriptors that spider has
791 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
792 * If some other context is calling this function, we return 1 so that we're
793 * scheduled again (if we were scheduled) and will not loose initiative.
796 spider_net_release_tx_chain(struct spider_net_card
*card
, int brutal
)
798 struct net_device
*dev
= card
->netdev
;
799 struct spider_net_descr_chain
*chain
= &card
->tx_chain
;
800 struct spider_net_descr
*descr
;
801 struct spider_net_hw_descr
*hwdescr
;
808 spin_lock_irqsave(&chain
->lock
, flags
);
809 if (chain
->tail
== chain
->head
) {
810 spin_unlock_irqrestore(&chain
->lock
, flags
);
814 hwdescr
= descr
->hwdescr
;
816 status
= spider_net_get_descr_status(hwdescr
);
818 case SPIDER_NET_DESCR_COMPLETE
:
819 dev
->stats
.tx_packets
++;
820 dev
->stats
.tx_bytes
+= descr
->skb
->len
;
823 case SPIDER_NET_DESCR_CARDOWNED
:
825 spin_unlock_irqrestore(&chain
->lock
, flags
);
829 /* fallthrough, if we release the descriptors
830 * brutally (then we don't care about
831 * SPIDER_NET_DESCR_CARDOWNED) */
833 case SPIDER_NET_DESCR_RESPONSE_ERROR
:
834 case SPIDER_NET_DESCR_PROTECTION_ERROR
:
835 case SPIDER_NET_DESCR_FORCE_END
:
836 if (netif_msg_tx_err(card
))
837 dev_err(&card
->netdev
->dev
, "forcing end of tx descriptor "
838 "with status x%02x\n", status
);
839 dev
->stats
.tx_errors
++;
843 dev
->stats
.tx_dropped
++;
845 spin_unlock_irqrestore(&chain
->lock
, flags
);
850 chain
->tail
= descr
->next
;
851 hwdescr
->dmac_cmd_status
|= SPIDER_NET_DESCR_NOT_IN_USE
;
854 buf_addr
= hwdescr
->buf_addr
;
855 spin_unlock_irqrestore(&chain
->lock
, flags
);
859 pci_unmap_single(card
->pdev
, buf_addr
, skb
->len
,
868 * spider_net_kick_tx_dma - enables TX DMA processing
869 * @card: card structure
870 * @descr: descriptor address to enable TX processing at
872 * This routine will start the transmit DMA running if
873 * it is not already running. This routine ned only be
874 * called when queueing a new packet to an empty tx queue.
875 * Writes the current tx chain head as start address
876 * of the tx descriptor chain and enables the transmission
880 spider_net_kick_tx_dma(struct spider_net_card
*card
)
882 struct spider_net_descr
*descr
;
884 if (spider_net_read_reg(card
, SPIDER_NET_GDTDMACCNTR
) &
885 SPIDER_NET_TX_DMA_EN
)
888 descr
= card
->tx_chain
.tail
;
890 if (spider_net_get_descr_status(descr
->hwdescr
) ==
891 SPIDER_NET_DESCR_CARDOWNED
) {
892 spider_net_write_reg(card
, SPIDER_NET_GDTDCHA
,
894 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
895 SPIDER_NET_DMA_TX_VALUE
);
898 if (descr
== card
->tx_chain
.head
)
904 mod_timer(&card
->tx_timer
, jiffies
+ SPIDER_NET_TX_TIMER
);
908 * spider_net_xmit - transmits a frame over the device
909 * @skb: packet to send out
910 * @netdev: interface device structure
912 * returns 0 on success, !0 on failure
915 spider_net_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
918 struct spider_net_card
*card
= netdev_priv(netdev
);
920 spider_net_release_tx_chain(card
, 0);
922 if (spider_net_prepare_tx_descr(card
, skb
) != 0) {
923 netdev
->stats
.tx_dropped
++;
924 netif_stop_queue(netdev
);
925 return NETDEV_TX_BUSY
;
928 cnt
= spider_net_set_low_watermark(card
);
930 spider_net_kick_tx_dma(card
);
935 * spider_net_cleanup_tx_ring - cleans up the TX ring
936 * @card: card structure
938 * spider_net_cleanup_tx_ring is called by either the tx_timer
939 * or from the NAPI polling routine.
940 * This routine releases resources associted with transmitted
941 * packets, including updating the queue tail pointer.
944 spider_net_cleanup_tx_ring(struct spider_net_card
*card
)
946 if ((spider_net_release_tx_chain(card
, 0) != 0) &&
947 (card
->netdev
->flags
& IFF_UP
)) {
948 spider_net_kick_tx_dma(card
);
949 netif_wake_queue(card
->netdev
);
954 * spider_net_do_ioctl - called for device ioctls
955 * @netdev: interface device structure
956 * @ifr: request parameter structure for ioctl
957 * @cmd: command code for ioctl
959 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
960 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
963 spider_net_do_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
972 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
973 * @descr: descriptor to process
974 * @card: card structure
976 * Fills out skb structure and passes the data to the stack.
977 * The descriptor state is not changed.
980 spider_net_pass_skb_up(struct spider_net_descr
*descr
,
981 struct spider_net_card
*card
)
983 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
984 struct sk_buff
*skb
= descr
->skb
;
985 struct net_device
*netdev
= card
->netdev
;
986 u32 data_status
= hwdescr
->data_status
;
987 u32 data_error
= hwdescr
->data_error
;
989 skb_put(skb
, hwdescr
->valid_size
);
991 /* the card seems to add 2 bytes of junk in front
992 * of the ethernet frame */
993 #define SPIDER_MISALIGN 2
994 skb_pull(skb
, SPIDER_MISALIGN
);
995 skb
->protocol
= eth_type_trans(skb
, netdev
);
997 /* checksum offload */
998 if (card
->options
.rx_csum
) {
999 if ( ( (data_status
& SPIDER_NET_DATA_STATUS_CKSUM_MASK
) ==
1000 SPIDER_NET_DATA_STATUS_CKSUM_MASK
) &&
1001 !(data_error
& SPIDER_NET_DATA_ERR_CKSUM_MASK
))
1002 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1004 skb
->ip_summed
= CHECKSUM_NONE
;
1006 skb
->ip_summed
= CHECKSUM_NONE
;
1008 if (data_status
& SPIDER_NET_VLAN_PACKET
) {
1009 /* further enhancements: HW-accel VLAN
1010 * vlan_hwaccel_receive_skb
1014 /* update netdevice statistics */
1015 netdev
->stats
.rx_packets
++;
1016 netdev
->stats
.rx_bytes
+= skb
->len
;
1018 /* pass skb up to stack */
1019 netif_receive_skb(skb
);
1022 static void show_rx_chain(struct spider_net_card
*card
)
1024 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1025 struct spider_net_descr
*start
= chain
->tail
;
1026 struct spider_net_descr
*descr
= start
;
1027 struct spider_net_hw_descr
*hwd
= start
->hwdescr
;
1028 struct device
*dev
= &card
->netdev
->dev
;
1029 u32 curr_desc
, next_desc
;
1034 int off
= start
- chain
->ring
;
1035 int cstat
= hwd
->dmac_cmd_status
;
1037 dev_info(dev
, "Total number of descrs=%d\n",
1039 dev_info(dev
, "Chain tail located at descr=%d, status=0x%x\n",
1042 curr_desc
= spider_net_read_reg(card
, SPIDER_NET_GDACTDPA
);
1043 next_desc
= spider_net_read_reg(card
, SPIDER_NET_GDACNEXTDA
);
1048 hwd
= descr
->hwdescr
;
1049 off
= descr
- chain
->ring
;
1050 status
= hwd
->dmac_cmd_status
;
1052 if (descr
== chain
->head
)
1053 dev_info(dev
, "Chain head is at %d, head status=0x%x\n",
1056 if (curr_desc
== descr
->bus_addr
)
1057 dev_info(dev
, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1060 if (next_desc
== descr
->bus_addr
)
1061 dev_info(dev
, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1064 if (hwd
->next_descr_addr
== 0)
1065 dev_info(dev
, "chain is cut at %d\n", off
);
1067 if (cstat
!= status
) {
1068 int from
= (chain
->num_desc
+ off
- cnt
) % chain
->num_desc
;
1069 int to
= (chain
->num_desc
+ off
- 1) % chain
->num_desc
;
1070 dev_info(dev
, "Have %d (from %d to %d) descrs "
1071 "with stat=0x%08x\n", cnt
, from
, to
, cstat
);
1078 descr
= descr
->next
;
1079 } while (descr
!= start
);
1081 dev_info(dev
, "Last %d descrs with stat=0x%08x "
1082 "for a total of %d descrs\n", cnt
, cstat
, tot
);
1085 /* Now dump the whole ring */
1089 struct spider_net_hw_descr
*hwd
= descr
->hwdescr
;
1090 status
= spider_net_get_descr_status(hwd
);
1091 cnt
= descr
- chain
->ring
;
1092 dev_info(dev
, "Descr %d stat=0x%08x skb=%p\n",
1093 cnt
, status
, descr
->skb
);
1094 dev_info(dev
, "bus addr=%08x buf addr=%08x sz=%d\n",
1095 descr
->bus_addr
, hwd
->buf_addr
, hwd
->buf_size
);
1096 dev_info(dev
, "next=%08x result sz=%d valid sz=%d\n",
1097 hwd
->next_descr_addr
, hwd
->result_size
,
1099 dev_info(dev
, "dmac=%08x data stat=%08x data err=%08x\n",
1100 hwd
->dmac_cmd_status
, hwd
->data_status
,
1102 dev_info(dev
, "\n");
1104 descr
= descr
->next
;
1105 } while (descr
!= start
);
1111 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1113 * If the driver fails to keep up and empty the queue, then the
1114 * hardware wil run out of room to put incoming packets. This
1115 * will cause the hardware to skip descrs that are full (instead
1116 * of halting/retrying). Thus, once the driver runs, it wil need
1117 * to "catch up" to where the hardware chain pointer is at.
1119 static void spider_net_resync_head_ptr(struct spider_net_card
*card
)
1121 unsigned long flags
;
1122 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1123 struct spider_net_descr
*descr
;
1126 /* Advance head pointer past any empty descrs */
1127 descr
= chain
->head
;
1128 status
= spider_net_get_descr_status(descr
->hwdescr
);
1130 if (status
== SPIDER_NET_DESCR_NOT_IN_USE
)
1133 spin_lock_irqsave(&chain
->lock
, flags
);
1135 descr
= chain
->head
;
1136 status
= spider_net_get_descr_status(descr
->hwdescr
);
1137 for (i
=0; i
<chain
->num_desc
; i
++) {
1138 if (status
!= SPIDER_NET_DESCR_CARDOWNED
) break;
1139 descr
= descr
->next
;
1140 status
= spider_net_get_descr_status(descr
->hwdescr
);
1142 chain
->head
= descr
;
1144 spin_unlock_irqrestore(&chain
->lock
, flags
);
1147 static int spider_net_resync_tail_ptr(struct spider_net_card
*card
)
1149 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1150 struct spider_net_descr
*descr
;
1153 /* Advance tail pointer past any empty and reaped descrs */
1154 descr
= chain
->tail
;
1155 status
= spider_net_get_descr_status(descr
->hwdescr
);
1157 for (i
=0; i
<chain
->num_desc
; i
++) {
1158 if ((status
!= SPIDER_NET_DESCR_CARDOWNED
) &&
1159 (status
!= SPIDER_NET_DESCR_NOT_IN_USE
)) break;
1160 descr
= descr
->next
;
1161 status
= spider_net_get_descr_status(descr
->hwdescr
);
1163 chain
->tail
= descr
;
1165 if ((i
== chain
->num_desc
) || (i
== 0))
1171 * spider_net_decode_one_descr - processes an RX descriptor
1172 * @card: card structure
1174 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1176 * Processes an RX descriptor by iommu-unmapping the data buffer
1177 * and passing the packet up to the stack. This function is called
1178 * in softirq context, e.g. either bottom half from interrupt or
1179 * NAPI polling context.
1182 spider_net_decode_one_descr(struct spider_net_card
*card
)
1184 struct net_device
*dev
= card
->netdev
;
1185 struct spider_net_descr_chain
*chain
= &card
->rx_chain
;
1186 struct spider_net_descr
*descr
= chain
->tail
;
1187 struct spider_net_hw_descr
*hwdescr
= descr
->hwdescr
;
1191 status
= spider_net_get_descr_status(hwdescr
);
1193 /* Nothing in the descriptor, or ring must be empty */
1194 if ((status
== SPIDER_NET_DESCR_CARDOWNED
) ||
1195 (status
== SPIDER_NET_DESCR_NOT_IN_USE
))
1198 /* descriptor definitively used -- move on tail */
1199 chain
->tail
= descr
->next
;
1201 /* unmap descriptor */
1202 hw_buf_addr
= hwdescr
->buf_addr
;
1203 hwdescr
->buf_addr
= 0xffffffff;
1204 pci_unmap_single(card
->pdev
, hw_buf_addr
,
1205 SPIDER_NET_MAX_FRAME
, PCI_DMA_FROMDEVICE
);
1207 if ( (status
== SPIDER_NET_DESCR_RESPONSE_ERROR
) ||
1208 (status
== SPIDER_NET_DESCR_PROTECTION_ERROR
) ||
1209 (status
== SPIDER_NET_DESCR_FORCE_END
) ) {
1210 if (netif_msg_rx_err(card
))
1212 "dropping RX descriptor with state %d\n", status
);
1213 dev
->stats
.rx_dropped
++;
1217 if ( (status
!= SPIDER_NET_DESCR_COMPLETE
) &&
1218 (status
!= SPIDER_NET_DESCR_FRAME_END
) ) {
1219 if (netif_msg_rx_err(card
))
1220 dev_err(&card
->netdev
->dev
,
1221 "RX descriptor with unknown state %d\n", status
);
1222 card
->spider_stats
.rx_desc_unk_state
++;
1226 /* The cases we'll throw away the packet immediately */
1227 if (hwdescr
->data_error
& SPIDER_NET_DESTROY_RX_FLAGS
) {
1228 if (netif_msg_rx_err(card
))
1229 dev_err(&card
->netdev
->dev
,
1230 "error in received descriptor found, "
1231 "data_status=x%08x, data_error=x%08x\n",
1232 hwdescr
->data_status
, hwdescr
->data_error
);
1236 if (hwdescr
->dmac_cmd_status
& SPIDER_NET_DESCR_BAD_STATUS
) {
1237 dev_err(&card
->netdev
->dev
, "bad status, cmd_status=x%08x\n",
1238 hwdescr
->dmac_cmd_status
);
1239 pr_err("buf_addr=x%08x\n", hw_buf_addr
);
1240 pr_err("buf_size=x%08x\n", hwdescr
->buf_size
);
1241 pr_err("next_descr_addr=x%08x\n", hwdescr
->next_descr_addr
);
1242 pr_err("result_size=x%08x\n", hwdescr
->result_size
);
1243 pr_err("valid_size=x%08x\n", hwdescr
->valid_size
);
1244 pr_err("data_status=x%08x\n", hwdescr
->data_status
);
1245 pr_err("data_error=x%08x\n", hwdescr
->data_error
);
1246 pr_err("which=%ld\n", descr
- card
->rx_chain
.ring
);
1248 card
->spider_stats
.rx_desc_error
++;
1252 /* Ok, we've got a packet in descr */
1253 spider_net_pass_skb_up(descr
, card
);
1255 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1259 if (netif_msg_rx_err(card
))
1260 show_rx_chain(card
);
1261 dev_kfree_skb_irq(descr
->skb
);
1263 hwdescr
->dmac_cmd_status
= SPIDER_NET_DESCR_NOT_IN_USE
;
1268 * spider_net_poll - NAPI poll function called by the stack to return packets
1269 * @netdev: interface device structure
1270 * @budget: number of packets we can pass to the stack at most
1272 * returns 0 if no more packets available to the driver/stack. Returns 1,
1273 * if the quota is exceeded, but the driver has still packets.
1275 * spider_net_poll returns all packets from the rx descriptors to the stack
1276 * (using netif_receive_skb). If all/enough packets are up, the driver
1277 * reenables interrupts and returns 0. If not, 1 is returned.
1279 static int spider_net_poll(struct napi_struct
*napi
, int budget
)
1281 struct spider_net_card
*card
= container_of(napi
, struct spider_net_card
, napi
);
1282 struct net_device
*netdev
= card
->netdev
;
1283 int packets_done
= 0;
1285 while (packets_done
< budget
) {
1286 if (!spider_net_decode_one_descr(card
))
1292 if ((packets_done
== 0) && (card
->num_rx_ints
!= 0)) {
1293 if (!spider_net_resync_tail_ptr(card
))
1294 packets_done
= budget
;
1295 spider_net_resync_head_ptr(card
);
1297 card
->num_rx_ints
= 0;
1299 spider_net_refill_rx_chain(card
);
1300 spider_net_enable_rxdmac(card
);
1302 spider_net_cleanup_tx_ring(card
);
1304 /* if all packets are in the stack, enable interrupts and return 0 */
1305 /* if not, return 1 */
1306 if (packets_done
< budget
) {
1307 netif_rx_complete(netdev
, napi
);
1308 spider_net_rx_irq_on(card
);
1309 card
->ignore_rx_ramfull
= 0;
1312 return packets_done
;
1316 * spider_net_change_mtu - changes the MTU of an interface
1317 * @netdev: interface device structure
1318 * @new_mtu: new MTU value
1320 * returns 0 on success, <0 on failure
1323 spider_net_change_mtu(struct net_device
*netdev
, int new_mtu
)
1325 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1326 * and mtu is outbound only anyway */
1327 if ( (new_mtu
< SPIDER_NET_MIN_MTU
) ||
1328 (new_mtu
> SPIDER_NET_MAX_MTU
) )
1330 netdev
->mtu
= new_mtu
;
1335 * spider_net_set_mac - sets the MAC of an interface
1336 * @netdev: interface device structure
1337 * @ptr: pointer to new MAC address
1339 * Returns 0 on success, <0 on failure. Currently, we don't support this
1340 * and will always return EOPNOTSUPP.
1343 spider_net_set_mac(struct net_device
*netdev
, void *p
)
1345 struct spider_net_card
*card
= netdev_priv(netdev
);
1346 u32 macl
, macu
, regvalue
;
1347 struct sockaddr
*addr
= p
;
1349 if (!is_valid_ether_addr(addr
->sa_data
))
1350 return -EADDRNOTAVAIL
;
1352 /* switch off GMACTPE and GMACRPE */
1353 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1354 regvalue
&= ~((1 << 5) | (1 << 6));
1355 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1358 macu
= (addr
->sa_data
[0]<<24) + (addr
->sa_data
[1]<<16) +
1359 (addr
->sa_data
[2]<<8) + (addr
->sa_data
[3]);
1360 macl
= (addr
->sa_data
[4]<<8) + (addr
->sa_data
[5]);
1361 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACU
, macu
);
1362 spider_net_write_reg(card
, SPIDER_NET_GMACUNIMACL
, macl
);
1364 /* switch GMACTPE and GMACRPE back on */
1365 regvalue
= spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
);
1366 regvalue
|= ((1 << 5) | (1 << 6));
1367 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
, regvalue
);
1369 spider_net_set_promisc(card
);
1371 /* look up, whether we have been successful */
1372 if (spider_net_get_mac_address(netdev
))
1373 return -EADDRNOTAVAIL
;
1374 if (memcmp(netdev
->dev_addr
,addr
->sa_data
,netdev
->addr_len
))
1375 return -EADDRNOTAVAIL
;
1381 * spider_net_link_reset
1382 * @netdev: net device structure
1384 * This is called when the PHY_LINK signal is asserted. For the blade this is
1385 * not connected so we should never get here.
1389 spider_net_link_reset(struct net_device
*netdev
)
1392 struct spider_net_card
*card
= netdev_priv(netdev
);
1394 del_timer_sync(&card
->aneg_timer
);
1396 /* clear interrupt, block further interrupts */
1397 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
1398 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
1399 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1401 /* reset phy and setup aneg */
1402 card
->aneg_count
= 0;
1403 card
->medium
= BCM54XX_COPPER
;
1404 spider_net_setup_aneg(card
);
1405 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1410 * spider_net_handle_error_irq - handles errors raised by an interrupt
1411 * @card: card structure
1412 * @status_reg: interrupt status register 0 (GHIINT0STS)
1414 * spider_net_handle_error_irq treats or ignores all error conditions
1415 * found when an interrupt is presented
1418 spider_net_handle_error_irq(struct spider_net_card
*card
, u32 status_reg
,
1419 u32 error_reg1
, u32 error_reg2
)
1424 /* check GHIINT0STS ************************************/
1426 for (i
= 0; i
< 32; i
++)
1427 if (status_reg
& (1<<i
))
1430 /* let error_reg1 and error_reg2 evaluation decide, what to do
1431 case SPIDER_NET_PHYINT:
1432 case SPIDER_NET_GMAC2INT:
1433 case SPIDER_NET_GMAC1INT:
1434 case SPIDER_NET_GFIFOINT:
1435 case SPIDER_NET_DMACINT:
1436 case SPIDER_NET_GSYSINT:
1439 case SPIDER_NET_GIPSINT
:
1443 case SPIDER_NET_GPWOPCMPINT
:
1444 /* PHY write operation completed */
1447 case SPIDER_NET_GPROPCMPINT
:
1448 /* PHY read operation completed */
1449 /* we don't use semaphores, as we poll for the completion
1450 * of the read operation in spider_net_read_phy. Should take
1454 case SPIDER_NET_GPWFFINT
:
1455 /* PHY command queue full */
1456 if (netif_msg_intr(card
))
1457 dev_err(&card
->netdev
->dev
, "PHY write queue full\n");
1461 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1462 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1463 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1465 case SPIDER_NET_GDTDEN0INT
:
1466 /* someone has set TX_DMA_EN to 0 */
1470 case SPIDER_NET_GDDDEN0INT
: /* fallthrough */
1471 case SPIDER_NET_GDCDEN0INT
: /* fallthrough */
1472 case SPIDER_NET_GDBDEN0INT
: /* fallthrough */
1473 case SPIDER_NET_GDADEN0INT
:
1474 /* someone has set RX_DMA_EN to 0 */
1479 case SPIDER_NET_GDDFDCINT
:
1480 case SPIDER_NET_GDCFDCINT
:
1481 case SPIDER_NET_GDBFDCINT
:
1482 case SPIDER_NET_GDAFDCINT
:
1483 /* case SPIDER_NET_GDNMINT: not used. print a message */
1484 /* case SPIDER_NET_GCNMINT: not used. print a message */
1485 /* case SPIDER_NET_GBNMINT: not used. print a message */
1486 /* case SPIDER_NET_GANMINT: not used. print a message */
1487 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1492 case SPIDER_NET_GDTFDCINT
:
1495 case SPIDER_NET_GTTEDINT
:
1498 case SPIDER_NET_GDTDCEINT
:
1499 /* chain end. If a descriptor should be sent, kick off
1501 if (card->tx_chain.tail != card->tx_chain.head)
1502 spider_net_kick_tx_dma(card);
1507 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1508 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1511 /* check GHIINT1STS ************************************/
1513 for (i
= 0; i
< 32; i
++)
1514 if (error_reg1
& (1<<i
))
1517 case SPIDER_NET_GTMFLLINT
:
1518 /* TX RAM full may happen on a usual case.
1519 * Logging is not needed. */
1522 case SPIDER_NET_GRFDFLLINT
: /* fallthrough */
1523 case SPIDER_NET_GRFCFLLINT
: /* fallthrough */
1524 case SPIDER_NET_GRFBFLLINT
: /* fallthrough */
1525 case SPIDER_NET_GRFAFLLINT
: /* fallthrough */
1526 case SPIDER_NET_GRMFLLINT
:
1527 /* Could happen when rx chain is full */
1528 if (card
->ignore_rx_ramfull
== 0) {
1529 card
->ignore_rx_ramfull
= 1;
1530 spider_net_resync_head_ptr(card
);
1531 spider_net_refill_rx_chain(card
);
1532 spider_net_enable_rxdmac(card
);
1533 card
->num_rx_ints
++;
1534 netif_rx_schedule(card
->netdev
,
1540 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1541 case SPIDER_NET_GDTINVDINT
:
1542 /* allrighty. tx from previous descr ok */
1547 case SPIDER_NET_GDDDCEINT
: /* fallthrough */
1548 case SPIDER_NET_GDCDCEINT
: /* fallthrough */
1549 case SPIDER_NET_GDBDCEINT
: /* fallthrough */
1550 case SPIDER_NET_GDADCEINT
:
1551 spider_net_resync_head_ptr(card
);
1552 spider_net_refill_rx_chain(card
);
1553 spider_net_enable_rxdmac(card
);
1554 card
->num_rx_ints
++;
1555 netif_rx_schedule(card
->netdev
,
1560 /* invalid descriptor */
1561 case SPIDER_NET_GDDINVDINT
: /* fallthrough */
1562 case SPIDER_NET_GDCINVDINT
: /* fallthrough */
1563 case SPIDER_NET_GDBINVDINT
: /* fallthrough */
1564 case SPIDER_NET_GDAINVDINT
:
1565 /* Could happen when rx chain is full */
1566 spider_net_resync_head_ptr(card
);
1567 spider_net_refill_rx_chain(card
);
1568 spider_net_enable_rxdmac(card
);
1569 card
->num_rx_ints
++;
1570 netif_rx_schedule(card
->netdev
,
1575 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1576 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1577 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1578 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1579 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1580 /* case SPIDER_NET_GDSERINT: problem, print a message */
1581 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1582 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1583 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1584 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1585 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1591 /* check GHIINT2STS ************************************/
1593 for (i
= 0; i
< 32; i
++)
1594 if (error_reg2
& (1<<i
))
1597 /* there is nothing we can (want to) do at this time. Log a
1598 * message, we can switch on and off the specific values later on
1599 case SPIDER_NET_GPROPERINT:
1600 case SPIDER_NET_GMCTCRSNGINT:
1601 case SPIDER_NET_GMCTLCOLINT:
1602 case SPIDER_NET_GMCTTMOTINT:
1603 case SPIDER_NET_GMCRCAERINT:
1604 case SPIDER_NET_GMCRCALERINT:
1605 case SPIDER_NET_GMCRALNERINT:
1606 case SPIDER_NET_GMCROVRINT:
1607 case SPIDER_NET_GMCRRNTINT:
1608 case SPIDER_NET_GMCRRXERINT:
1609 case SPIDER_NET_GTITCSERINT:
1610 case SPIDER_NET_GTIFMTERINT:
1611 case SPIDER_NET_GTIPKTRVKINT:
1612 case SPIDER_NET_GTISPINGINT:
1613 case SPIDER_NET_GTISADNGINT:
1614 case SPIDER_NET_GTISPDNGINT:
1615 case SPIDER_NET_GRIFMTERINT:
1616 case SPIDER_NET_GRIPKTRVKINT:
1617 case SPIDER_NET_GRISPINGINT:
1618 case SPIDER_NET_GRISADNGINT:
1619 case SPIDER_NET_GRISPDNGINT:
1626 if ((show_error
) && (netif_msg_intr(card
)) && net_ratelimit())
1627 dev_err(&card
->netdev
->dev
, "Error interrupt, GHIINT0STS = 0x%08x, "
1628 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1629 status_reg
, error_reg1
, error_reg2
);
1631 /* clear interrupt sources */
1632 spider_net_write_reg(card
, SPIDER_NET_GHIINT1STS
, error_reg1
);
1633 spider_net_write_reg(card
, SPIDER_NET_GHIINT2STS
, error_reg2
);
1637 * spider_net_interrupt - interrupt handler for spider_net
1638 * @irq: interrupt number
1639 * @ptr: pointer to net_device
1640 * @regs: PU registers
1642 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1643 * interrupt found raised by card.
1645 * This is the interrupt handler, that turns off
1646 * interrupts for this device and makes the stack poll the driver
1649 spider_net_interrupt(int irq
, void *ptr
)
1651 struct net_device
*netdev
= ptr
;
1652 struct spider_net_card
*card
= netdev_priv(netdev
);
1653 u32 status_reg
, error_reg1
, error_reg2
;
1655 status_reg
= spider_net_read_reg(card
, SPIDER_NET_GHIINT0STS
);
1656 error_reg1
= spider_net_read_reg(card
, SPIDER_NET_GHIINT1STS
);
1657 error_reg2
= spider_net_read_reg(card
, SPIDER_NET_GHIINT2STS
);
1659 if (!(status_reg
& SPIDER_NET_INT0_MASK_VALUE
) &&
1660 !(error_reg1
& SPIDER_NET_INT1_MASK_VALUE
) &&
1661 !(error_reg2
& SPIDER_NET_INT2_MASK_VALUE
))
1664 if (status_reg
& SPIDER_NET_RXINT
) {
1665 spider_net_rx_irq_off(card
);
1666 netif_rx_schedule(netdev
, &card
->napi
);
1667 card
->num_rx_ints
++;
1669 if (status_reg
& SPIDER_NET_TXINT
)
1670 netif_rx_schedule(netdev
, &card
->napi
);
1672 if (status_reg
& SPIDER_NET_LINKINT
)
1673 spider_net_link_reset(netdev
);
1675 if (status_reg
& SPIDER_NET_ERRINT
)
1676 spider_net_handle_error_irq(card
, status_reg
,
1677 error_reg1
, error_reg2
);
1679 /* clear interrupt sources */
1680 spider_net_write_reg(card
, SPIDER_NET_GHIINT0STS
, status_reg
);
1685 #ifdef CONFIG_NET_POLL_CONTROLLER
1687 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1688 * @netdev: interface device structure
1690 * see Documentation/networking/netconsole.txt
1693 spider_net_poll_controller(struct net_device
*netdev
)
1695 disable_irq(netdev
->irq
);
1696 spider_net_interrupt(netdev
->irq
, netdev
);
1697 enable_irq(netdev
->irq
);
1699 #endif /* CONFIG_NET_POLL_CONTROLLER */
1702 * spider_net_enable_interrupts - enable interrupts
1703 * @card: card structure
1705 * spider_net_enable_interrupt enables several interrupts
1708 spider_net_enable_interrupts(struct spider_net_card
*card
)
1710 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
,
1711 SPIDER_NET_INT0_MASK_VALUE
);
1712 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
,
1713 SPIDER_NET_INT1_MASK_VALUE
);
1714 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
,
1715 SPIDER_NET_INT2_MASK_VALUE
);
1719 * spider_net_disable_interrupts - disable interrupts
1720 * @card: card structure
1722 * spider_net_disable_interrupts disables all the interrupts
1725 spider_net_disable_interrupts(struct spider_net_card
*card
)
1727 spider_net_write_reg(card
, SPIDER_NET_GHIINT0MSK
, 0);
1728 spider_net_write_reg(card
, SPIDER_NET_GHIINT1MSK
, 0);
1729 spider_net_write_reg(card
, SPIDER_NET_GHIINT2MSK
, 0);
1730 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0);
1734 * spider_net_init_card - initializes the card
1735 * @card: card structure
1737 * spider_net_init_card initializes the card so that other registers can
1741 spider_net_init_card(struct spider_net_card
*card
)
1743 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1744 SPIDER_NET_CKRCTRL_STOP_VALUE
);
1746 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
1747 SPIDER_NET_CKRCTRL_RUN_VALUE
);
1749 /* trigger ETOMOD signal */
1750 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1751 spider_net_read_reg(card
, SPIDER_NET_GMACOPEMD
) | 0x4);
1753 spider_net_disable_interrupts(card
);
1757 * spider_net_enable_card - enables the card by setting all kinds of regs
1758 * @card: card structure
1760 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1763 spider_net_enable_card(struct spider_net_card
*card
)
1766 /* the following array consists of (register),(value) pairs
1767 * that are set in this function. A register of 0 ends the list */
1769 { SPIDER_NET_GRESUMINTNUM
, 0 },
1770 { SPIDER_NET_GREINTNUM
, 0 },
1772 /* set interrupt frame number registers */
1773 /* clear the single DMA engine registers first */
1774 { SPIDER_NET_GFAFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1775 { SPIDER_NET_GFBFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1776 { SPIDER_NET_GFCFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1777 { SPIDER_NET_GFDFRMNUM
, SPIDER_NET_GFXFRAMES_VALUE
},
1778 /* then set, what we really need */
1779 { SPIDER_NET_GFFRMNUM
, SPIDER_NET_FRAMENUM_VALUE
},
1781 /* timer counter registers and stuff */
1782 { SPIDER_NET_GFREECNNUM
, 0 },
1783 { SPIDER_NET_GONETIMENUM
, 0 },
1784 { SPIDER_NET_GTOUTFRMNUM
, 0 },
1786 /* RX mode setting */
1787 { SPIDER_NET_GRXMDSET
, SPIDER_NET_RXMODE_VALUE
},
1788 /* TX mode setting */
1789 { SPIDER_NET_GTXMDSET
, SPIDER_NET_TXMODE_VALUE
},
1790 /* IPSEC mode setting */
1791 { SPIDER_NET_GIPSECINIT
, SPIDER_NET_IPSECINIT_VALUE
},
1793 { SPIDER_NET_GFTRESTRT
, SPIDER_NET_RESTART_VALUE
},
1795 { SPIDER_NET_GMRWOLCTRL
, 0 },
1796 { SPIDER_NET_GTESTMD
, 0x10000000 },
1797 { SPIDER_NET_GTTQMSK
, 0x00400040 },
1799 { SPIDER_NET_GMACINTEN
, 0 },
1801 /* flow control stuff */
1802 { SPIDER_NET_GMACAPAUSE
, SPIDER_NET_MACAPAUSE_VALUE
},
1803 { SPIDER_NET_GMACTXPAUSE
, SPIDER_NET_TXPAUSE_VALUE
},
1805 { SPIDER_NET_GMACBSTLMT
, SPIDER_NET_BURSTLMT_VALUE
},
1810 while (regs
[i
][0]) {
1811 spider_net_write_reg(card
, regs
[i
][0], regs
[i
][1]);
1815 /* clear unicast filter table entries 1 to 14 */
1816 for (i
= 1; i
<= 14; i
++) {
1817 spider_net_write_reg(card
,
1818 SPIDER_NET_GMRUAFILnR
+ i
* 8,
1820 spider_net_write_reg(card
,
1821 SPIDER_NET_GMRUAFILnR
+ i
* 8 + 4,
1825 spider_net_write_reg(card
, SPIDER_NET_GMRUA0FIL15R
, 0x08080000);
1827 spider_net_write_reg(card
, SPIDER_NET_ECMODE
, SPIDER_NET_ECMODE_VALUE
);
1829 /* set chain tail adress for RX chains and
1831 spider_net_enable_rxchtails(card
);
1832 spider_net_enable_rxdmac(card
);
1834 spider_net_write_reg(card
, SPIDER_NET_GRXDMAEN
, SPIDER_NET_WOL_VALUE
);
1836 spider_net_write_reg(card
, SPIDER_NET_GMACLENLMT
,
1837 SPIDER_NET_LENLMT_VALUE
);
1838 spider_net_write_reg(card
, SPIDER_NET_GMACOPEMD
,
1839 SPIDER_NET_OPMODE_VALUE
);
1841 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
1842 SPIDER_NET_GDTBSTA
);
1846 * spider_net_download_firmware - loads firmware into the adapter
1847 * @card: card structure
1848 * @firmware_ptr: pointer to firmware data
1850 * spider_net_download_firmware loads the firmware data into the
1851 * adapter. It assumes the length etc. to be allright.
1854 spider_net_download_firmware(struct spider_net_card
*card
,
1855 const void *firmware_ptr
)
1858 const u32
*fw_ptr
= firmware_ptr
;
1860 /* stop sequencers */
1861 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1862 SPIDER_NET_STOP_SEQ_VALUE
);
1864 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
1866 spider_net_write_reg(card
,
1867 SPIDER_NET_GSnPRGADR
+ sequencer
* 8, 0);
1868 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
1869 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
1870 sequencer
* 8, *fw_ptr
);
1875 if (spider_net_read_reg(card
, SPIDER_NET_GSINIT
))
1878 spider_net_write_reg(card
, SPIDER_NET_GSINIT
,
1879 SPIDER_NET_RUN_SEQ_VALUE
);
1885 * spider_net_init_firmware - reads in firmware parts
1886 * @card: card structure
1888 * Returns 0 on success, <0 on failure
1890 * spider_net_init_firmware opens the sequencer firmware and does some basic
1891 * checks. This function opens and releases the firmware structure. A call
1892 * to download the firmware is performed before the release.
1896 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1897 * the program for each sequencer. Use the command
1898 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1899 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1900 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1902 * to generate spider_fw.bin, if you have sequencer programs with something
1903 * like the following contents for each sequencer:
1904 * <ONE LINE COMMENT>
1905 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1906 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1908 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1911 spider_net_init_firmware(struct spider_net_card
*card
)
1913 struct firmware
*firmware
= NULL
;
1914 struct device_node
*dn
;
1915 const u8
*fw_prop
= NULL
;
1919 if (request_firmware((const struct firmware
**)&firmware
,
1920 SPIDER_NET_FIRMWARE_NAME
, &card
->pdev
->dev
) == 0) {
1921 if ( (firmware
->size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1922 netif_msg_probe(card
) ) {
1923 dev_err(&card
->netdev
->dev
,
1924 "Incorrect size of spidernet firmware in " \
1925 "filesystem. Looking in host firmware...\n");
1928 err
= spider_net_download_firmware(card
, firmware
->data
);
1930 release_firmware(firmware
);
1938 dn
= pci_device_to_OF_node(card
->pdev
);
1942 fw_prop
= of_get_property(dn
, "firmware", &fw_size
);
1946 if ( (fw_size
!= SPIDER_NET_FIRMWARE_LEN
) &&
1947 netif_msg_probe(card
) ) {
1948 dev_err(&card
->netdev
->dev
,
1949 "Incorrect size of spidernet firmware in host firmware\n");
1953 err
= spider_net_download_firmware(card
, fw_prop
);
1958 if (netif_msg_probe(card
))
1959 dev_err(&card
->netdev
->dev
,
1960 "Couldn't find spidernet firmware in filesystem " \
1961 "or host firmware\n");
1966 * spider_net_open - called upon ifonfig up
1967 * @netdev: interface device structure
1969 * returns 0 on success, <0 on failure
1971 * spider_net_open allocates all the descriptors and memory needed for
1972 * operation, sets up multicast list and enables interrupts
1975 spider_net_open(struct net_device
*netdev
)
1977 struct spider_net_card
*card
= netdev_priv(netdev
);
1980 result
= spider_net_init_firmware(card
);
1982 goto init_firmware_failed
;
1984 /* start probing with copper */
1985 card
->aneg_count
= 0;
1986 card
->medium
= BCM54XX_COPPER
;
1987 spider_net_setup_aneg(card
);
1988 if (card
->phy
.def
->phy_id
)
1989 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
1991 result
= spider_net_init_chain(card
, &card
->tx_chain
);
1993 goto alloc_tx_failed
;
1994 card
->low_watermark
= NULL
;
1996 result
= spider_net_init_chain(card
, &card
->rx_chain
);
1998 goto alloc_rx_failed
;
2000 /* Allocate rx skbs */
2001 if (spider_net_alloc_rx_skbs(card
))
2002 goto alloc_skbs_failed
;
2004 spider_net_set_multi(netdev
);
2006 /* further enhancement: setup hw vlan, if needed */
2009 if (request_irq(netdev
->irq
, spider_net_interrupt
,
2010 IRQF_SHARED
, netdev
->name
, netdev
))
2011 goto register_int_failed
;
2013 spider_net_enable_card(card
);
2015 netif_start_queue(netdev
);
2016 netif_carrier_on(netdev
);
2017 napi_enable(&card
->napi
);
2019 spider_net_enable_interrupts(card
);
2023 register_int_failed
:
2024 spider_net_free_rx_chain_contents(card
);
2026 spider_net_free_chain(card
, &card
->rx_chain
);
2028 spider_net_free_chain(card
, &card
->tx_chain
);
2030 del_timer_sync(&card
->aneg_timer
);
2031 init_firmware_failed
:
2036 * spider_net_link_phy
2037 * @data: used for pointer to card structure
2040 static void spider_net_link_phy(unsigned long data
)
2042 struct spider_net_card
*card
= (struct spider_net_card
*)data
;
2043 struct mii_phy
*phy
= &card
->phy
;
2045 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2046 if (card
->aneg_count
> SPIDER_NET_ANEG_TIMEOUT
) {
2048 pr_debug("%s: link is down trying to bring it up\n",
2049 card
->netdev
->name
);
2051 switch (card
->medium
) {
2052 case BCM54XX_COPPER
:
2053 /* enable fiber with autonegotiation first */
2054 if (phy
->def
->ops
->enable_fiber
)
2055 phy
->def
->ops
->enable_fiber(phy
, 1);
2056 card
->medium
= BCM54XX_FIBER
;
2060 /* fiber didn't come up, try to disable fiber autoneg */
2061 if (phy
->def
->ops
->enable_fiber
)
2062 phy
->def
->ops
->enable_fiber(phy
, 0);
2063 card
->medium
= BCM54XX_UNKNOWN
;
2066 case BCM54XX_UNKNOWN
:
2067 /* copper, fiber with and without failed,
2068 * retry from beginning */
2069 spider_net_setup_aneg(card
);
2070 card
->medium
= BCM54XX_COPPER
;
2074 card
->aneg_count
= 0;
2075 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
2079 /* link still not up, try again later */
2080 if (!(phy
->def
->ops
->poll_link(phy
))) {
2082 mod_timer(&card
->aneg_timer
, jiffies
+ SPIDER_NET_ANEG_TIMER
);
2086 /* link came up, get abilities */
2087 phy
->def
->ops
->read_link(phy
);
2089 spider_net_write_reg(card
, SPIDER_NET_GMACST
,
2090 spider_net_read_reg(card
, SPIDER_NET_GMACST
));
2091 spider_net_write_reg(card
, SPIDER_NET_GMACINTEN
, 0x4);
2093 if (phy
->speed
== 1000)
2094 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0x00000001);
2096 spider_net_write_reg(card
, SPIDER_NET_GMACMODE
, 0);
2098 card
->aneg_count
= 0;
2100 pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2101 card
->netdev
->name
, phy
->speed
,
2102 phy
->duplex
== 1 ? "Full" : "Half",
2103 phy
->autoneg
== 1 ? "" : "no ");
2109 * spider_net_setup_phy - setup PHY
2110 * @card: card structure
2112 * returns 0 on success, <0 on failure
2114 * spider_net_setup_phy is used as part of spider_net_probe.
2117 spider_net_setup_phy(struct spider_net_card
*card
)
2119 struct mii_phy
*phy
= &card
->phy
;
2121 spider_net_write_reg(card
, SPIDER_NET_GDTDMASEL
,
2122 SPIDER_NET_DMASEL_VALUE
);
2123 spider_net_write_reg(card
, SPIDER_NET_GPCCTRL
,
2124 SPIDER_NET_PHY_CTRL_VALUE
);
2126 phy
->dev
= card
->netdev
;
2127 phy
->mdio_read
= spider_net_read_phy
;
2128 phy
->mdio_write
= spider_net_write_phy
;
2130 for (phy
->mii_id
= 1; phy
->mii_id
<= 31; phy
->mii_id
++) {
2132 id
= spider_net_read_phy(card
->netdev
, phy
->mii_id
, MII_BMSR
);
2133 if (id
!= 0x0000 && id
!= 0xffff) {
2134 if (!mii_phy_probe(phy
, phy
->mii_id
)) {
2135 pr_info("Found %s.\n", phy
->def
->name
);
2145 * spider_net_workaround_rxramfull - work around firmware bug
2146 * @card: card structure
2151 spider_net_workaround_rxramfull(struct spider_net_card
*card
)
2153 int i
, sequencer
= 0;
2156 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2157 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2159 /* empty sequencer data */
2160 for (sequencer
= 0; sequencer
< SPIDER_NET_FIRMWARE_SEQS
;
2162 spider_net_write_reg(card
, SPIDER_NET_GSnPRGADR
+
2163 sequencer
* 8, 0x0);
2164 for (i
= 0; i
< SPIDER_NET_FIRMWARE_SEQWORDS
; i
++) {
2165 spider_net_write_reg(card
, SPIDER_NET_GSnPRGDAT
+
2166 sequencer
* 8, 0x0);
2170 /* set sequencer operation */
2171 spider_net_write_reg(card
, SPIDER_NET_GSINIT
, 0x000000fe);
2174 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2175 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2179 * spider_net_stop - called upon ifconfig down
2180 * @netdev: interface device structure
2185 spider_net_stop(struct net_device
*netdev
)
2187 struct spider_net_card
*card
= netdev_priv(netdev
);
2189 napi_disable(&card
->napi
);
2190 netif_carrier_off(netdev
);
2191 netif_stop_queue(netdev
);
2192 del_timer_sync(&card
->tx_timer
);
2193 del_timer_sync(&card
->aneg_timer
);
2195 spider_net_disable_interrupts(card
);
2197 free_irq(netdev
->irq
, netdev
);
2199 spider_net_write_reg(card
, SPIDER_NET_GDTDMACCNTR
,
2200 SPIDER_NET_DMA_TX_FEND_VALUE
);
2202 /* turn off DMA, force end */
2203 spider_net_disable_rxdmac(card
);
2205 /* release chains */
2206 spider_net_release_tx_chain(card
, 1);
2207 spider_net_free_rx_chain_contents(card
);
2209 spider_net_free_chain(card
, &card
->tx_chain
);
2210 spider_net_free_chain(card
, &card
->rx_chain
);
2216 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2217 * function (to be called not under interrupt status)
2218 * @data: data, is interface device structure
2220 * called as task when tx hangs, resets interface (if interface is up)
2223 spider_net_tx_timeout_task(struct work_struct
*work
)
2225 struct spider_net_card
*card
=
2226 container_of(work
, struct spider_net_card
, tx_timeout_task
);
2227 struct net_device
*netdev
= card
->netdev
;
2229 if (!(netdev
->flags
& IFF_UP
))
2232 netif_device_detach(netdev
);
2233 spider_net_stop(netdev
);
2235 spider_net_workaround_rxramfull(card
);
2236 spider_net_init_card(card
);
2238 if (spider_net_setup_phy(card
))
2241 spider_net_open(netdev
);
2242 spider_net_kick_tx_dma(card
);
2243 netif_device_attach(netdev
);
2246 atomic_dec(&card
->tx_timeout_task_counter
);
2250 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2251 * @netdev: interface device structure
2253 * called, if tx hangs. Schedules a task that resets the interface
2256 spider_net_tx_timeout(struct net_device
*netdev
)
2258 struct spider_net_card
*card
;
2260 card
= netdev_priv(netdev
);
2261 atomic_inc(&card
->tx_timeout_task_counter
);
2262 if (netdev
->flags
& IFF_UP
)
2263 schedule_work(&card
->tx_timeout_task
);
2265 atomic_dec(&card
->tx_timeout_task_counter
);
2266 card
->spider_stats
.tx_timeouts
++;
2270 * spider_net_setup_netdev_ops - initialization of net_device operations
2271 * @netdev: net_device structure
2273 * fills out function pointers in the net_device structure
2276 spider_net_setup_netdev_ops(struct net_device
*netdev
)
2278 netdev
->open
= &spider_net_open
;
2279 netdev
->stop
= &spider_net_stop
;
2280 netdev
->hard_start_xmit
= &spider_net_xmit
;
2281 netdev
->set_multicast_list
= &spider_net_set_multi
;
2282 netdev
->set_mac_address
= &spider_net_set_mac
;
2283 netdev
->change_mtu
= &spider_net_change_mtu
;
2284 netdev
->do_ioctl
= &spider_net_do_ioctl
;
2286 netdev
->tx_timeout
= &spider_net_tx_timeout
;
2287 netdev
->watchdog_timeo
= SPIDER_NET_WATCHDOG_TIMEOUT
;
2289 #ifdef CONFIG_NET_POLL_CONTROLLER
2290 /* poll controller */
2291 netdev
->poll_controller
= &spider_net_poll_controller
;
2292 #endif /* CONFIG_NET_POLL_CONTROLLER */
2294 netdev
->ethtool_ops
= &spider_net_ethtool_ops
;
2298 * spider_net_setup_netdev - initialization of net_device
2299 * @card: card structure
2301 * Returns 0 on success or <0 on failure
2303 * spider_net_setup_netdev initializes the net_device structure
2306 spider_net_setup_netdev(struct spider_net_card
*card
)
2309 struct net_device
*netdev
= card
->netdev
;
2310 struct device_node
*dn
;
2311 struct sockaddr addr
;
2314 SET_NETDEV_DEV(netdev
, &card
->pdev
->dev
);
2316 pci_set_drvdata(card
->pdev
, netdev
);
2318 init_timer(&card
->tx_timer
);
2319 card
->tx_timer
.function
=
2320 (void (*)(unsigned long)) spider_net_cleanup_tx_ring
;
2321 card
->tx_timer
.data
= (unsigned long) card
;
2322 netdev
->irq
= card
->pdev
->irq
;
2324 card
->aneg_count
= 0;
2325 init_timer(&card
->aneg_timer
);
2326 card
->aneg_timer
.function
= spider_net_link_phy
;
2327 card
->aneg_timer
.data
= (unsigned long) card
;
2329 card
->options
.rx_csum
= SPIDER_NET_RX_CSUM_DEFAULT
;
2331 netif_napi_add(netdev
, &card
->napi
,
2332 spider_net_poll
, SPIDER_NET_NAPI_WEIGHT
);
2334 spider_net_setup_netdev_ops(netdev
);
2336 netdev
->features
= NETIF_F_IP_CSUM
| NETIF_F_LLTX
;
2337 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2338 * NETIF_F_HW_VLAN_FILTER */
2340 netdev
->irq
= card
->pdev
->irq
;
2341 card
->num_rx_ints
= 0;
2342 card
->ignore_rx_ramfull
= 0;
2344 dn
= pci_device_to_OF_node(card
->pdev
);
2348 mac
= of_get_property(dn
, "local-mac-address", NULL
);
2351 memcpy(addr
.sa_data
, mac
, ETH_ALEN
);
2353 result
= spider_net_set_mac(netdev
, &addr
);
2354 if ((result
) && (netif_msg_probe(card
)))
2355 dev_err(&card
->netdev
->dev
,
2356 "Failed to set MAC address: %i\n", result
);
2358 result
= register_netdev(netdev
);
2360 if (netif_msg_probe(card
))
2361 dev_err(&card
->netdev
->dev
,
2362 "Couldn't register net_device: %i\n", result
);
2366 if (netif_msg_probe(card
))
2367 pr_info("Initialized device %s.\n", netdev
->name
);
2373 * spider_net_alloc_card - allocates net_device and card structure
2375 * returns the card structure or NULL in case of errors
2377 * the card and net_device structures are linked to each other
2379 static struct spider_net_card
*
2380 spider_net_alloc_card(void)
2382 struct net_device
*netdev
;
2383 struct spider_net_card
*card
;
2386 alloc_size
= sizeof(struct spider_net_card
) +
2387 (tx_descriptors
+ rx_descriptors
) * sizeof(struct spider_net_descr
);
2388 netdev
= alloc_etherdev(alloc_size
);
2392 card
= netdev_priv(netdev
);
2393 card
->netdev
= netdev
;
2394 card
->msg_enable
= SPIDER_NET_DEFAULT_MSG
;
2395 INIT_WORK(&card
->tx_timeout_task
, spider_net_tx_timeout_task
);
2396 init_waitqueue_head(&card
->waitq
);
2397 atomic_set(&card
->tx_timeout_task_counter
, 0);
2399 card
->rx_chain
.num_desc
= rx_descriptors
;
2400 card
->rx_chain
.ring
= card
->darray
;
2401 card
->tx_chain
.num_desc
= tx_descriptors
;
2402 card
->tx_chain
.ring
= card
->darray
+ rx_descriptors
;
2408 * spider_net_undo_pci_setup - releases PCI ressources
2409 * @card: card structure
2411 * spider_net_undo_pci_setup releases the mapped regions
2414 spider_net_undo_pci_setup(struct spider_net_card
*card
)
2416 iounmap(card
->regs
);
2417 pci_release_regions(card
->pdev
);
2421 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2422 * @card: card structure
2425 * Returns the card structure or NULL if any errors occur
2427 * spider_net_setup_pci_dev initializes pdev and together with the
2428 * functions called in spider_net_open configures the device so that
2429 * data can be transferred over it
2430 * The net_device structure is attached to the card structure, if the
2431 * function returns without error.
2433 static struct spider_net_card
*
2434 spider_net_setup_pci_dev(struct pci_dev
*pdev
)
2436 struct spider_net_card
*card
;
2437 unsigned long mmio_start
, mmio_len
;
2439 if (pci_enable_device(pdev
)) {
2440 dev_err(&pdev
->dev
, "Couldn't enable PCI device\n");
2444 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
2446 "Couldn't find proper PCI device base address.\n");
2447 goto out_disable_dev
;
2450 if (pci_request_regions(pdev
, spider_net_driver_name
)) {
2452 "Couldn't obtain PCI resources, aborting.\n");
2453 goto out_disable_dev
;
2456 pci_set_master(pdev
);
2458 card
= spider_net_alloc_card();
2461 "Couldn't allocate net_device structure, aborting.\n");
2462 goto out_release_regions
;
2466 /* fetch base address and length of first resource */
2467 mmio_start
= pci_resource_start(pdev
, 0);
2468 mmio_len
= pci_resource_len(pdev
, 0);
2470 card
->netdev
->mem_start
= mmio_start
;
2471 card
->netdev
->mem_end
= mmio_start
+ mmio_len
;
2472 card
->regs
= ioremap(mmio_start
, mmio_len
);
2476 "Couldn't obtain PCI resources, aborting.\n");
2477 goto out_release_regions
;
2482 out_release_regions
:
2483 pci_release_regions(pdev
);
2485 pci_disable_device(pdev
);
2486 pci_set_drvdata(pdev
, NULL
);
2491 * spider_net_probe - initialization of a device
2493 * @ent: entry in the device id list
2495 * Returns 0 on success, <0 on failure
2497 * spider_net_probe initializes pdev and registers a net_device
2498 * structure for it. After that, the device can be ifconfig'ed up
2500 static int __devinit
2501 spider_net_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
2504 struct spider_net_card
*card
;
2506 card
= spider_net_setup_pci_dev(pdev
);
2510 spider_net_workaround_rxramfull(card
);
2511 spider_net_init_card(card
);
2513 err
= spider_net_setup_phy(card
);
2517 err
= spider_net_setup_netdev(card
);
2524 spider_net_undo_pci_setup(card
);
2525 free_netdev(card
->netdev
);
2531 * spider_net_remove - removal of a device
2534 * Returns 0 on success, <0 on failure
2536 * spider_net_remove is called to remove the device and unregisters the
2539 static void __devexit
2540 spider_net_remove(struct pci_dev
*pdev
)
2542 struct net_device
*netdev
;
2543 struct spider_net_card
*card
;
2545 netdev
= pci_get_drvdata(pdev
);
2546 card
= netdev_priv(netdev
);
2548 wait_event(card
->waitq
,
2549 atomic_read(&card
->tx_timeout_task_counter
) == 0);
2551 unregister_netdev(netdev
);
2553 /* switch off card */
2554 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2555 SPIDER_NET_CKRCTRL_STOP_VALUE
);
2556 spider_net_write_reg(card
, SPIDER_NET_CKRCTRL
,
2557 SPIDER_NET_CKRCTRL_RUN_VALUE
);
2559 spider_net_undo_pci_setup(card
);
2560 free_netdev(netdev
);
2563 static struct pci_driver spider_net_driver
= {
2564 .name
= spider_net_driver_name
,
2565 .id_table
= spider_net_pci_tbl
,
2566 .probe
= spider_net_probe
,
2567 .remove
= __devexit_p(spider_net_remove
)
2571 * spider_net_init - init function when the driver is loaded
2573 * spider_net_init registers the device driver
2575 static int __init
spider_net_init(void)
2577 printk(KERN_INFO
"Spidernet version %s.\n", VERSION
);
2579 if (rx_descriptors
< SPIDER_NET_RX_DESCRIPTORS_MIN
) {
2580 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MIN
;
2581 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2583 if (rx_descriptors
> SPIDER_NET_RX_DESCRIPTORS_MAX
) {
2584 rx_descriptors
= SPIDER_NET_RX_DESCRIPTORS_MAX
;
2585 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors
);
2587 if (tx_descriptors
< SPIDER_NET_TX_DESCRIPTORS_MIN
) {
2588 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MIN
;
2589 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2591 if (tx_descriptors
> SPIDER_NET_TX_DESCRIPTORS_MAX
) {
2592 tx_descriptors
= SPIDER_NET_TX_DESCRIPTORS_MAX
;
2593 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors
);
2596 return pci_register_driver(&spider_net_driver
);
2600 * spider_net_cleanup - exit function when driver is unloaded
2602 * spider_net_cleanup unregisters the device driver
2604 static void __exit
spider_net_cleanup(void)
2606 pci_unregister_driver(&spider_net_driver
);
2609 module_init(spider_net_init
);
2610 module_exit(spider_net_cleanup
);