4 * linux/include/linux/ide.h
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/hdreg.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #ifdef CONFIG_BLK_DEV_IDEACPI
21 #include <acpi/acpi.h>
23 #include <asm/byteorder.h>
24 #include <asm/system.h>
26 #include <asm/semaphore.h>
27 #include <asm/mutex.h>
29 #if defined(CRIS) || defined(FRV)
30 # define SUPPORT_VLB_SYNC 0
32 # define SUPPORT_VLB_SYNC 1
36 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
40 #define IDE_NO_IRQ (-1)
42 typedef unsigned char byte
; /* used everywhere */
45 * Probably not wise to fiddle with these
47 #define ERROR_MAX 8 /* Max read/write errors per sector */
48 #define ERROR_RESET 3 /* Reset controller every 4th retry */
49 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
54 #define IDE_TUNE_NOAUTO 2
55 #define IDE_TUNE_AUTO 1
56 #define IDE_TUNE_DEFAULT 0
62 #define DMA_PIO_RETRY 1 /* retrying in PIO */
64 #define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
65 #define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
68 * Definitions for accessing IDE controller registers
70 #define IDE_NR_PORTS (10)
72 #define IDE_DATA_OFFSET (0)
73 #define IDE_ERROR_OFFSET (1)
74 #define IDE_NSECTOR_OFFSET (2)
75 #define IDE_SECTOR_OFFSET (3)
76 #define IDE_LCYL_OFFSET (4)
77 #define IDE_HCYL_OFFSET (5)
78 #define IDE_SELECT_OFFSET (6)
79 #define IDE_STATUS_OFFSET (7)
80 #define IDE_CONTROL_OFFSET (8)
81 #define IDE_IRQ_OFFSET (9)
83 #define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
84 #define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
86 #define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET])
87 #define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
88 #define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
89 #define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
90 #define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
91 #define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
92 #define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
93 #define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
94 #define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
95 #define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
97 #define IDE_FEATURE_REG IDE_ERROR_REG
98 #define IDE_COMMAND_REG IDE_STATUS_REG
99 #define IDE_ALTSTATUS_REG IDE_CONTROL_REG
100 #define IDE_IREASON_REG IDE_NSECTOR_REG
101 #define IDE_BCOUNTL_REG IDE_LCYL_REG
102 #define IDE_BCOUNTH_REG IDE_HCYL_REG
104 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
105 #define BAD_R_STAT (BUSY_STAT | ERR_STAT)
106 #define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
107 #define BAD_STAT (BAD_R_STAT | DRQ_STAT)
108 #define DRIVE_READY (READY_STAT | SEEK_STAT)
110 #define BAD_CRC (ABRT_ERR | ICRC_ERR)
112 #define SATA_NR_PORTS (3) /* 16 possible ?? */
114 #define SATA_STATUS_OFFSET (0)
115 #define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
116 #define SATA_ERROR_OFFSET (1)
117 #define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
118 #define SATA_CONTROL_OFFSET (2)
119 #define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
121 #define SATA_MISC_OFFSET (0)
122 #define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
123 #define SATA_PHY_OFFSET (1)
124 #define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
125 #define SATA_IEN_OFFSET (2)
126 #define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
129 * Our Physical Region Descriptor (PRD) table should be large enough
130 * to handle the biggest I/O request we are likely to see. Since requests
131 * can have no more than 256 sectors, and since the typical blocksize is
132 * two or more sectors, we could get by with a limit of 128 entries here for
133 * the usual worst case. Most requests seem to include some contiguous blocks,
134 * further reducing the number of table entries required.
136 * The driver reverts to PIO mode for individual requests that exceed
137 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
138 * 100% of all crazy scenarios here is not necessary.
140 * As it turns out though, we must allocate a full 4KB page for this,
141 * so the two PRD tables (ide0 & ide1) will each get half of that,
142 * allowing each to have about 256 entries (8 bytes each) from this.
145 #define PRD_ENTRIES 256
148 * Some more useful definitions
150 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
151 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
152 #define SECTOR_SIZE 512
153 #define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
154 #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
157 * Timeouts for various operations:
159 #define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
160 #define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
161 #define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
162 #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
163 #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
164 #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
167 * Check for an interrupt and acknowledge the interrupt status
170 typedef int (ide_ack_intr_t
)(struct hwif_s
*);
173 * hwif_chipset_t is used to keep track of the specific hardware
174 * chipset used by each IDE interface, if known.
176 enum { ide_unknown
, ide_generic
, ide_pci
,
177 ide_cmd640
, ide_dtc2278
, ide_ali14xx
,
178 ide_qd65xx
, ide_umc8672
, ide_ht6560b
,
179 ide_rz1000
, ide_trm290
,
180 ide_cmd646
, ide_cy82c693
, ide_4drives
,
181 ide_pmac
, ide_etrax100
, ide_acorn
,
182 ide_au1xxx
, ide_forced
185 typedef u8 hwif_chipset_t
;
188 * Structure to hold all information about the location of this port
190 typedef struct hw_regs_s
{
191 unsigned long io_ports
[IDE_NR_PORTS
]; /* task file registers */
192 int irq
; /* our irq number */
193 ide_ack_intr_t
*ack_intr
; /* acknowledge interrupt */
194 hwif_chipset_t chipset
;
198 struct hwif_s
* ide_find_port(unsigned long);
199 struct hwif_s
*ide_deprecated_find_port(unsigned long);
200 void ide_init_port_data(struct hwif_s
*, unsigned int);
201 void ide_init_port_hw(struct hwif_s
*, hw_regs_t
*);
204 int ide_register_hw(hw_regs_t
*, void (*)(struct ide_drive_s
*),
207 void ide_setup_ports( hw_regs_t
*hw
,
212 ide_ack_intr_t
*ack_intr
,
218 static inline void ide_std_init_ports(hw_regs_t
*hw
,
219 unsigned long io_addr
,
220 unsigned long ctl_addr
)
224 for (i
= IDE_DATA_OFFSET
; i
<= IDE_STATUS_OFFSET
; i
++)
225 hw
->io_ports
[i
] = io_addr
++;
227 hw
->io_ports
[IDE_CONTROL_OFFSET
] = ctl_addr
;
232 #if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
234 #define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
237 /* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
238 #ifndef IDE_ARCH_OBSOLETE_DEFAULTS
239 # define ide_default_io_base(index) (0)
240 # define ide_default_irq(base) (0)
241 # define ide_init_default_irq(base) (0)
244 #ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
245 static inline void ide_init_hwif_ports(hw_regs_t
*hw
,
246 unsigned long io_addr
,
247 unsigned long ctl_addr
,
251 ide_std_init_ports(hw
, io_addr
, ide_default_io_ctl(io_addr
));
253 ide_std_init_ports(hw
, io_addr
, ctl_addr
);
258 hw
->io_ports
[IDE_IRQ_OFFSET
] = 0;
261 if (ppc_ide_md
.ide_init_hwif
)
262 ppc_ide_md
.ide_init_hwif(hw
, io_addr
, ctl_addr
, irq
);
266 static inline void ide_init_hwif_ports(hw_regs_t
*hw
,
267 unsigned long io_addr
,
268 unsigned long ctl_addr
,
271 if (io_addr
|| ctl_addr
)
272 printk(KERN_WARNING
"%s: must not be called\n", __FUNCTION__
);
274 #endif /* CONFIG_IDE_ARCH_OBSOLETE_INIT */
276 /* Currently only m68k, apus and m8xx need it */
277 #ifndef IDE_ARCH_ACK_INTR
278 # define ide_ack_intr(hwif) (1)
281 /* Currently only Atari needs it */
282 #ifndef IDE_ARCH_LOCK
283 # define ide_release_lock() do {} while (0)
284 # define ide_get_lock(hdlr, data) do {} while (0)
285 #endif /* IDE_ARCH_LOCK */
288 * Now for the data we need to maintain per-drive: ide_drive_t
291 #define ide_scsi 0x21
292 #define ide_disk 0x20
293 #define ide_optical 0x7
294 #define ide_cdrom 0x5
296 #define ide_floppy 0x0
299 * Special Driver Flags
301 * set_geometry : respecify drive geometry
302 * recalibrate : seek to cyl 0
303 * set_multmode : set multmode count
304 * set_tune : tune interface for drive
305 * serviced : service command
311 unsigned set_geometry
: 1;
312 unsigned recalibrate
: 1;
313 unsigned set_multmode
: 1;
314 unsigned set_tune
: 1;
315 unsigned serviced
: 1;
316 unsigned reserved
: 3;
321 * ATA-IDE Select Register, aka Device-Head
323 * head : always zeros here
324 * unit : drive select number: 0/1
326 * lba : using LBA instead of CHS
332 #if defined(__LITTLE_ENDIAN_BITFIELD)
338 #elif defined(__BIG_ENDIAN_BITFIELD)
345 #error "Please fix <asm/byteorder.h>"
348 } select_t
, ata_select_t
;
351 * Status returned from various ide_ functions
354 ide_stopped
, /* no drive operation was started */
355 ide_started
, /* a drive operation was started, handler was set */
359 struct ide_settings_s
;
361 #ifdef CONFIG_BLK_DEV_IDEACPI
362 struct ide_acpi_drive_link
;
363 struct ide_acpi_hwif_link
;
366 typedef struct ide_drive_s
{
367 char name
[4]; /* drive name, such as "hda" */
368 char driver_req
[10]; /* requests specific driver */
370 struct request_queue
*queue
; /* request queue */
372 struct request
*rq
; /* current request */
373 struct ide_drive_s
*next
; /* circular list of hwgroup drives */
374 void *driver_data
; /* extra driver data */
375 struct hd_driveid
*id
; /* drive model identification info */
376 #ifdef CONFIG_IDE_PROC_FS
377 struct proc_dir_entry
*proc
; /* /proc/ide/ directory entry */
378 struct ide_settings_s
*settings
;/* /proc/ide/ drive settings */
380 struct hwif_s
*hwif
; /* actually (ide_hwif_t *) */
382 unsigned long sleep
; /* sleep until this time */
383 unsigned long service_start
; /* time we started last request */
384 unsigned long service_time
; /* service time of last request */
385 unsigned long timeout
; /* max time to wait for irq */
387 special_t special
; /* special action flags */
388 select_t select
; /* basic drive/head select reg value */
390 u8 keep_settings
; /* restore settings after drive reset */
391 u8 using_dma
; /* disk is using dma for read/write */
392 u8 retry_pio
; /* retrying dma capable host in pio */
393 u8 state
; /* retry state */
394 u8 waiting_for_dma
; /* dma currently in progress */
395 u8 unmask
; /* okay to unmask other irqs */
396 u8 noflush
; /* don't attempt flushes */
397 u8 dsc_overlap
; /* DSC overlap */
398 u8 nice1
; /* give potential excess bandwidth */
400 unsigned present
: 1; /* drive is physically present */
401 unsigned dead
: 1; /* device ejected hint */
402 unsigned id_read
: 1; /* 1=id read from disk 0 = synthetic */
403 unsigned noprobe
: 1; /* from: hdx=noprobe */
404 unsigned removable
: 1; /* 1 if need to do check_media_change */
405 unsigned attach
: 1; /* needed for removable devices */
406 unsigned forced_geom
: 1; /* 1 if hdx=c,h,s was given at boot */
407 unsigned no_unmask
: 1; /* disallow setting unmask bit */
408 unsigned no_io_32bit
: 1; /* disallow enabling 32bit I/O */
409 unsigned atapi_overlap
: 1; /* ATAPI overlap (not supported) */
410 unsigned nice0
: 1; /* give obvious excess bandwidth */
411 unsigned nice2
: 1; /* give a share in our own bandwidth */
412 unsigned doorlocking
: 1; /* for removable only: door lock/unlock works */
413 unsigned nodma
: 1; /* disallow DMA */
414 unsigned autotune
: 2; /* 0=default, 1=autotune, 2=noautotune */
415 unsigned remap_0_to_1
: 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
416 unsigned blocked
: 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
417 unsigned vdma
: 1; /* 1=doing PIO over DMA 0=doing normal DMA */
418 unsigned scsi
: 1; /* 0=default, 1=ide-scsi emulation */
419 unsigned sleeping
: 1; /* 1=sleeping & sleep field valid */
420 unsigned post_reset
: 1;
421 unsigned udma33_warned
: 1;
423 u8 addressing
; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
424 u8 quirk_list
; /* considered quirky, set for a specific host */
425 u8 init_speed
; /* transfer rate set at boot */
426 u8 current_speed
; /* current transfer rate set */
427 u8 desired_speed
; /* desired transfer rate set */
428 u8 dn
; /* now wide spread use */
429 u8 wcache
; /* status of write cache */
430 u8 acoustic
; /* acoustic management */
431 u8 media
; /* disk, cdrom, tape, floppy, ... */
432 u8 ctl
; /* "normal" value for IDE_CONTROL_REG */
433 u8 ready_stat
; /* min status value for drive ready */
434 u8 mult_count
; /* current multiple sector setting */
435 u8 mult_req
; /* requested multiple sector setting */
436 u8 tune_req
; /* requested drive tuning setting */
437 u8 io_32bit
; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
438 u8 bad_wstat
; /* used for ignoring WRERR_STAT */
439 u8 nowerr
; /* used for ignoring WRERR_STAT */
440 u8 sect0
; /* offset of first sector for DM6:DDO */
441 u8 head
; /* "real" number of heads */
442 u8 sect
; /* "real" sectors per track */
443 u8 bios_head
; /* BIOS/fdisk/LILO number of heads */
444 u8 bios_sect
; /* BIOS/fdisk/LILO sectors per track */
446 unsigned int bios_cyl
; /* BIOS/fdisk/LILO number of cyls */
447 unsigned int cyl
; /* "real" number of cyls */
448 unsigned int drive_data
; /* used by set_pio_mode/selectproc */
449 unsigned int failures
; /* current failure count */
450 unsigned int max_failures
; /* maximum allowed failure count */
451 u64 probed_capacity
;/* initial reported media capacity (ide-cd only currently) */
453 u64 capacity64
; /* total number of sectors */
455 int lun
; /* logical unit */
456 int crc_count
; /* crc counter to reduce drive speed */
457 #ifdef CONFIG_BLK_DEV_IDEACPI
458 struct ide_acpi_drive_link
*acpidata
;
460 struct list_head list
;
461 struct device gendev
;
462 struct completion gendev_rel_comp
; /* to deal with device release() */
465 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
467 #define IDE_CHIPSET_PCI_MASK \
468 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
469 #define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
471 struct ide_port_info
;
473 typedef struct hwif_s
{
474 struct hwif_s
*next
; /* for linked-list in ide_hwgroup_t */
475 struct hwif_s
*mate
; /* other hwif from same PCI chip */
476 struct hwgroup_s
*hwgroup
; /* actually (ide_hwgroup_t *) */
477 struct proc_dir_entry
*proc
; /* /proc/ide/ directory entry */
479 char name
[6]; /* name of interface, eg. "ide0" */
481 /* task file registers for pata and sata */
482 unsigned long io_ports
[IDE_NR_PORTS
];
483 unsigned long sata_scr
[SATA_NR_PORTS
];
484 unsigned long sata_misc
[SATA_NR_PORTS
];
486 ide_drive_t drives
[MAX_DRIVES
]; /* drive info */
488 u8 major
; /* our major number */
489 u8 index
; /* 0 for ide0; 1 for ide1; ... */
490 u8 channel
; /* for dual-port chips: 0=primary, 1=secondary */
491 u8 bus_state
; /* power state of the IDE bus */
501 u8 cbl
; /* cable type */
503 hwif_chipset_t chipset
; /* sub-module for tuning.. */
507 const struct ide_port_info
*cds
; /* chipset device struct */
509 ide_ack_intr_t
*ack_intr
;
511 void (*rw_disk
)(ide_drive_t
*, struct request
*);
514 ide_hwif_ops_t
*hwifops
;
516 /* host specific initialization of devices on a port */
517 void (*port_init_devs
)(struct hwif_s
*);
518 /* routine to program host for PIO mode */
519 void (*set_pio_mode
)(ide_drive_t
*, const u8
);
520 /* routine to program host for DMA mode */
521 void (*set_dma_mode
)(ide_drive_t
*, const u8
);
522 /* tweaks hardware to select drive */
523 void (*selectproc
)(ide_drive_t
*);
524 /* chipset polling based on hba specifics */
525 int (*reset_poll
)(ide_drive_t
*);
526 /* chipset specific changes to default for device-hba resets */
527 void (*pre_reset
)(ide_drive_t
*);
528 /* routine to reset controller after a disk reset */
529 void (*resetproc
)(ide_drive_t
*);
530 /* special host masking for drive selection */
531 void (*maskproc
)(ide_drive_t
*, int);
532 /* check host's drive quirk list */
533 void (*quirkproc
)(ide_drive_t
*);
534 /* driver soft-power interface */
535 int (*busproc
)(ide_drive_t
*, int);
537 u8 (*mdma_filter
)(ide_drive_t
*);
538 u8 (*udma_filter
)(ide_drive_t
*);
540 u8 (*cable_detect
)(struct hwif_s
*);
542 void (*ata_input_data
)(ide_drive_t
*, void *, u32
);
543 void (*ata_output_data
)(ide_drive_t
*, void *, u32
);
545 void (*atapi_input_bytes
)(ide_drive_t
*, void *, u32
);
546 void (*atapi_output_bytes
)(ide_drive_t
*, void *, u32
);
548 void (*dma_host_set
)(ide_drive_t
*, int);
549 int (*dma_setup
)(ide_drive_t
*);
550 void (*dma_exec_cmd
)(ide_drive_t
*, u8
);
551 void (*dma_start
)(ide_drive_t
*);
552 int (*ide_dma_end
)(ide_drive_t
*drive
);
553 int (*ide_dma_test_irq
)(ide_drive_t
*drive
);
554 void (*ide_dma_clear_irq
)(ide_drive_t
*drive
);
555 void (*dma_lost_irq
)(ide_drive_t
*drive
);
556 void (*dma_timeout
)(ide_drive_t
*drive
);
558 void (*OUTB
)(u8 addr
, unsigned long port
);
559 void (*OUTBSYNC
)(ide_drive_t
*drive
, u8 addr
, unsigned long port
);
560 void (*OUTW
)(u16 addr
, unsigned long port
);
561 void (*OUTSW
)(unsigned long port
, void *addr
, u32 count
);
562 void (*OUTSL
)(unsigned long port
, void *addr
, u32 count
);
564 u8 (*INB
)(unsigned long port
);
565 u16 (*INW
)(unsigned long port
);
566 void (*INSW
)(unsigned long port
, void *addr
, u32 count
);
567 void (*INSL
)(unsigned long port
, void *addr
, u32 count
);
569 /* dma physical region descriptor table (cpu view) */
570 unsigned int *dmatable_cpu
;
571 /* dma physical region descriptor table (dma view) */
572 dma_addr_t dmatable_dma
;
573 /* Scatter-gather list used to build the above */
574 struct scatterlist
*sg_table
;
575 int sg_max_nents
; /* Maximum number of entries in it */
576 int sg_nents
; /* Current number of entries in it */
577 int sg_dma_direction
; /* dma transfer direction */
579 /* data phase of the active command (currently only valid for PIO/DMA) */
584 struct scatterlist
*cursg
;
585 unsigned int cursg_ofs
;
587 int rqsize
; /* max sectors per request */
588 int irq
; /* our irq number */
590 unsigned long dma_base
; /* base addr for dma ports */
591 unsigned long dma_command
; /* dma command register */
592 unsigned long dma_vendor1
; /* dma vendor 1 register */
593 unsigned long dma_status
; /* dma status register */
594 unsigned long dma_vendor3
; /* dma vendor 3 register */
595 unsigned long dma_prdtable
; /* actual prd table address */
597 unsigned long config_data
; /* for use by chipset-specific code */
598 unsigned long select_data
; /* for use by chipset-specific code */
600 unsigned long extra_base
; /* extra addr for dma ports */
601 unsigned extra_ports
; /* number of extra dma ports */
603 unsigned noprobe
: 1; /* don't probe for this interface */
604 unsigned present
: 1; /* this interface exists */
605 unsigned hold
: 1; /* this interface is always present */
606 unsigned serialized
: 1; /* serialized all channel operation */
607 unsigned sharing_irq
: 1; /* 1 = sharing irq with another hwif */
608 unsigned reset
: 1; /* reset after probe */
609 unsigned sg_mapped
: 1; /* sg_table and sg_nents are ready */
610 unsigned mmio
: 1; /* host uses MMIO */
611 unsigned straight8
: 1; /* Alan's straight 8 check */
613 struct device gendev
;
614 struct completion gendev_rel_comp
; /* To deal with device release() */
616 void *hwif_data
; /* extra hwif data */
620 #ifdef CONFIG_BLK_DEV_IDEACPI
621 struct ide_acpi_hwif_link
*acpidata
;
623 } ____cacheline_internodealigned_in_smp ide_hwif_t
;
626 * internal ide interrupt handler type
628 typedef ide_startstop_t (ide_handler_t
)(ide_drive_t
*);
629 typedef int (ide_expiry_t
)(ide_drive_t
*);
631 /* used by ide-cd, ide-floppy, etc. */
632 typedef void (xfer_func_t
)(ide_drive_t
*, void *, u32
);
634 typedef struct hwgroup_s
{
635 /* irq handler, if active */
636 ide_startstop_t (*handler
)(ide_drive_t
*);
638 /* BOOL: protects all fields below */
640 /* BOOL: wake us up on timer expiry */
641 unsigned int sleeping
: 1;
642 /* BOOL: polling active & poll_timeout field valid */
643 unsigned int polling
: 1;
644 /* BOOL: in a polling reset situation. Must not trigger another reset yet */
645 unsigned int resetting
: 1;
649 /* ptr to current hwif in linked-list */
652 /* current request */
656 struct timer_list timer
;
657 /* timeout value during long polls */
658 unsigned long poll_timeout
;
659 /* queried upon timeouts */
660 int (*expiry
)(ide_drive_t
*);
666 typedef struct ide_driver_s ide_driver_t
;
668 extern struct mutex ide_setting_mtx
;
670 int set_io_32bit(ide_drive_t
*, int);
671 int set_pio_mode(ide_drive_t
*, int);
672 int set_using_dma(ide_drive_t
*, int);
674 #ifdef CONFIG_IDE_PROC_FS
676 * configurable drive settings
683 #define SETTING_READ (1 << 0)
684 #define SETTING_WRITE (1 << 1)
685 #define SETTING_RW (SETTING_READ | SETTING_WRITE)
687 typedef int (ide_procset_t
)(ide_drive_t
*, int);
688 typedef struct ide_settings_s
{
699 struct ide_settings_s
*next
;
702 int ide_add_setting(ide_drive_t
*, const char *, int, int, int, int, int, int, void *, ide_procset_t
*set
);
705 * /proc/ide interface
710 read_proc_t
*read_proc
;
711 write_proc_t
*write_proc
;
714 void proc_ide_create(void);
715 void proc_ide_destroy(void);
716 void ide_proc_register_port(ide_hwif_t
*);
717 void ide_proc_port_register_devices(ide_hwif_t
*);
718 void ide_proc_unregister_port(ide_hwif_t
*);
719 void ide_proc_register_driver(ide_drive_t
*, ide_driver_t
*);
720 void ide_proc_unregister_driver(ide_drive_t
*, ide_driver_t
*);
722 void ide_add_generic_settings(ide_drive_t
*);
724 read_proc_t proc_ide_read_capacity
;
725 read_proc_t proc_ide_read_geometry
;
727 #ifdef CONFIG_BLK_DEV_IDEPCI
728 void ide_pci_create_host_proc(const char *, get_info_t
*);
732 * Standard exit stuff:
734 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
743 *start = page + off; \
747 static inline void proc_ide_create(void) { ; }
748 static inline void proc_ide_destroy(void) { ; }
749 static inline void ide_proc_register_port(ide_hwif_t
*hwif
) { ; }
750 static inline void ide_proc_port_register_devices(ide_hwif_t
*hwif
) { ; }
751 static inline void ide_proc_unregister_port(ide_hwif_t
*hwif
) { ; }
752 static inline void ide_proc_register_driver(ide_drive_t
*drive
, ide_driver_t
*driver
) { ; }
753 static inline void ide_proc_unregister_driver(ide_drive_t
*drive
, ide_driver_t
*driver
) { ; }
754 static inline void ide_add_generic_settings(ide_drive_t
*drive
) { ; }
755 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
759 * Power Management step value (rq->pm->pm_step).
761 * The step value starts at 0 (ide_pm_state_start_suspend) for a
762 * suspend operation or 1000 (ide_pm_state_start_resume) for a
765 * For each step, the core calls the subdriver start_power_step() first.
767 * - ide_stopped : In this case, the core calls us back again unless
768 * step have been set to ide_power_state_completed.
769 * - ide_started : In this case, the channel is left busy until an
770 * async event (interrupt) occurs.
771 * Typically, start_power_step() will issue a taskfile request with
774 * Upon reception of the interrupt, the core will call complete_power_step()
775 * with the error code if any. This routine should update the step value
776 * and return. It should not start a new request. The core will call
777 * start_power_step for the new step value, unless step have been set to
778 * ide_power_state_completed.
780 * Subdrivers are expected to define their own additional power
781 * steps from 1..999 for suspend and from 1001..1999 for resume,
782 * other values are reserved for future use.
786 ide_pm_state_completed
= -1,
787 ide_pm_state_start_suspend
= 0,
788 ide_pm_state_start_resume
= 1000,
792 * Subdrivers support.
794 * The gendriver.owner field should be set to the module owner of this driver.
795 * The gendriver.name field should be set to the name of this driver
797 struct ide_driver_s
{
800 unsigned supports_dsc_overlap
: 1;
801 ide_startstop_t (*do_request
)(ide_drive_t
*, struct request
*, sector_t
);
802 int (*end_request
)(ide_drive_t
*, int, int);
803 ide_startstop_t (*error
)(ide_drive_t
*, struct request
*rq
, u8
, u8
);
804 ide_startstop_t (*abort
)(ide_drive_t
*, struct request
*rq
);
805 struct device_driver gen_driver
;
806 int (*probe
)(ide_drive_t
*);
807 void (*remove
)(ide_drive_t
*);
808 void (*resume
)(ide_drive_t
*);
809 void (*shutdown
)(ide_drive_t
*);
810 #ifdef CONFIG_IDE_PROC_FS
811 ide_proc_entry_t
*proc
;
815 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
817 int generic_ide_ioctl(ide_drive_t
*, struct file
*, struct block_device
*, unsigned, unsigned long);
820 * ide_hwifs[] is the master data structure used to keep track
821 * of just about everything in ide.c. Whenever possible, routines
822 * should be using pointers to a drive (ide_drive_t *) or
823 * pointers to a hwif (ide_hwif_t *), rather than indexing this
824 * structure directly (the allocation/layout may change!).
828 extern ide_hwif_t ide_hwifs
[]; /* master data repository */
830 extern int noautodma
;
832 extern int ide_end_request (ide_drive_t
*drive
, int uptodate
, int nrsecs
);
833 int ide_end_dequeued_request(ide_drive_t
*drive
, struct request
*rq
,
834 int uptodate
, int nr_sectors
);
836 extern void ide_set_handler (ide_drive_t
*drive
, ide_handler_t
*handler
, unsigned int timeout
, ide_expiry_t
*expiry
);
838 void ide_execute_command(ide_drive_t
*, u8
, ide_handler_t
*, unsigned int,
841 ide_startstop_t
__ide_error(ide_drive_t
*, struct request
*, u8
, u8
);
843 ide_startstop_t
ide_error (ide_drive_t
*drive
, const char *msg
, byte stat
);
845 ide_startstop_t
__ide_abort(ide_drive_t
*, struct request
*);
847 extern ide_startstop_t
ide_abort(ide_drive_t
*, const char *);
849 extern void ide_fix_driveid(struct hd_driveid
*);
851 extern void ide_fixstring(u8
*, const int, const int);
853 int ide_wait_stat(ide_startstop_t
*, ide_drive_t
*, u8
, u8
, unsigned long);
855 extern ide_startstop_t
ide_do_reset (ide_drive_t
*);
857 extern void ide_init_drive_cmd (struct request
*rq
);
860 * "action" parameter type for ide_do_drive_cmd() below.
863 ide_wait
, /* insert rq at end of list, and wait for it */
864 ide_preempt
, /* insert rq in front of current request */
865 ide_head_wait
, /* insert rq in front of current request and wait for it */
866 ide_end
/* insert rq at end of list, but don't wait for it */
869 extern int ide_do_drive_cmd(ide_drive_t
*, struct request
*, ide_action_t
);
871 extern void ide_end_drive_cmd(ide_drive_t
*, u8
, u8
);
874 IDE_TFLAG_LBA48
= (1 << 0),
875 IDE_TFLAG_NO_SELECT_MASK
= (1 << 1),
876 IDE_TFLAG_FLAGGED
= (1 << 2),
877 IDE_TFLAG_OUT_DATA
= (1 << 3),
878 IDE_TFLAG_OUT_HOB_FEATURE
= (1 << 4),
879 IDE_TFLAG_OUT_HOB_NSECT
= (1 << 5),
880 IDE_TFLAG_OUT_HOB_LBAL
= (1 << 6),
881 IDE_TFLAG_OUT_HOB_LBAM
= (1 << 7),
882 IDE_TFLAG_OUT_HOB_LBAH
= (1 << 8),
883 IDE_TFLAG_OUT_HOB
= IDE_TFLAG_OUT_HOB_FEATURE
|
884 IDE_TFLAG_OUT_HOB_NSECT
|
885 IDE_TFLAG_OUT_HOB_LBAL
|
886 IDE_TFLAG_OUT_HOB_LBAM
|
887 IDE_TFLAG_OUT_HOB_LBAH
,
888 IDE_TFLAG_OUT_FEATURE
= (1 << 9),
889 IDE_TFLAG_OUT_NSECT
= (1 << 10),
890 IDE_TFLAG_OUT_LBAL
= (1 << 11),
891 IDE_TFLAG_OUT_LBAM
= (1 << 12),
892 IDE_TFLAG_OUT_LBAH
= (1 << 13),
893 IDE_TFLAG_OUT_TF
= IDE_TFLAG_OUT_FEATURE
|
894 IDE_TFLAG_OUT_NSECT
|
898 IDE_TFLAG_OUT_DEVICE
= (1 << 14),
899 IDE_TFLAG_WRITE
= (1 << 15),
900 IDE_TFLAG_FLAGGED_SET_IN_FLAGS
= (1 << 16),
901 IDE_TFLAG_IN_DATA
= (1 << 17),
902 IDE_TFLAG_CUSTOM_HANDLER
= (1 << 18),
903 IDE_TFLAG_DMA_PIO_FALLBACK
= (1 << 19),
904 IDE_TFLAG_IN_HOB_FEATURE
= (1 << 20),
905 IDE_TFLAG_IN_HOB_NSECT
= (1 << 21),
906 IDE_TFLAG_IN_HOB_LBAL
= (1 << 22),
907 IDE_TFLAG_IN_HOB_LBAM
= (1 << 23),
908 IDE_TFLAG_IN_HOB_LBAH
= (1 << 24),
909 IDE_TFLAG_IN_HOB_LBA
= IDE_TFLAG_IN_HOB_LBAL
|
910 IDE_TFLAG_IN_HOB_LBAM
|
911 IDE_TFLAG_IN_HOB_LBAH
,
912 IDE_TFLAG_IN_HOB
= IDE_TFLAG_IN_HOB_FEATURE
|
913 IDE_TFLAG_IN_HOB_NSECT
|
914 IDE_TFLAG_IN_HOB_LBA
,
915 IDE_TFLAG_IN_NSECT
= (1 << 25),
916 IDE_TFLAG_IN_LBAL
= (1 << 26),
917 IDE_TFLAG_IN_LBAM
= (1 << 27),
918 IDE_TFLAG_IN_LBAH
= (1 << 28),
919 IDE_TFLAG_IN_LBA
= IDE_TFLAG_IN_LBAL
|
922 IDE_TFLAG_IN_TF
= IDE_TFLAG_IN_NSECT
|
924 IDE_TFLAG_IN_DEVICE
= (1 << 29),
925 IDE_TFLAG_HOB
= IDE_TFLAG_OUT_HOB
|
927 IDE_TFLAG_TF
= IDE_TFLAG_OUT_TF
|
929 IDE_TFLAG_DEVICE
= IDE_TFLAG_OUT_DEVICE
|
931 /* force 16-bit I/O operations */
932 IDE_TFLAG_IO_16BIT
= (1 << 30),
935 struct ide_taskfile
{
936 u8 hob_data
; /* 0: high data byte (for TASKFILE IOCTL) */
938 u8 hob_feature
; /* 1-5: additional data to support LBA48 */
944 u8 data
; /* 6: low data byte (for TASKFILE IOCTL) */
947 u8 error
; /* read: error */
948 u8 feature
; /* write: feature */
951 u8 nsect
; /* 8: number of sectors */
952 u8 lbal
; /* 9: LBA low */
953 u8 lbam
; /* 10: LBA mid */
954 u8 lbah
; /* 11: LBA high */
956 u8 device
; /* 12: device select */
959 u8 status
; /*  read: status  */
960 u8 command
; /* write: command */
964 typedef struct ide_task_s
{
966 struct ide_taskfile tf
;
971 struct request
*rq
; /* copy of request */
972 void *special
; /* valid_t generally */
975 void ide_tf_load(ide_drive_t
*, ide_task_t
*);
976 void ide_tf_read(ide_drive_t
*, ide_task_t
*);
978 extern void SELECT_DRIVE(ide_drive_t
*);
979 extern void SELECT_MASK(ide_drive_t
*, int);
981 extern int drive_is_ready(ide_drive_t
*);
983 void ide_pktcmd_tf_load(ide_drive_t
*, u32
, u16
, u8
);
985 ide_startstop_t
do_rw_taskfile(ide_drive_t
*, ide_task_t
*);
987 void task_end_request(ide_drive_t
*, struct request
*, u8
);
989 int ide_raw_taskfile(ide_drive_t
*, ide_task_t
*, u8
*, u16
);
990 int ide_no_data_taskfile(ide_drive_t
*, ide_task_t
*);
992 int ide_taskfile_ioctl(ide_drive_t
*, unsigned int, unsigned long);
993 int ide_cmd_ioctl(ide_drive_t
*, unsigned int, unsigned long);
994 int ide_task_ioctl(ide_drive_t
*, unsigned int, unsigned long);
996 extern int system_bus_clock(void);
998 extern int ide_driveid_update(ide_drive_t
*);
999 extern int ide_ata66_check(ide_drive_t
*, ide_task_t
*);
1000 extern int ide_config_drive_speed(ide_drive_t
*, u8
);
1001 extern u8
eighty_ninty_three (ide_drive_t
*);
1002 extern int set_transfer(ide_drive_t
*, ide_task_t
*);
1003 extern int taskfile_lib_get_identify(ide_drive_t
*drive
, u8
*);
1005 extern int ide_wait_not_busy(ide_hwif_t
*hwif
, unsigned long timeout
);
1007 extern void ide_stall_queue(ide_drive_t
*drive
, unsigned long timeout
);
1009 extern int ide_spin_wait_hwgroup(ide_drive_t
*);
1010 extern void ide_timer_expiry(unsigned long);
1011 extern irqreturn_t
ide_intr(int irq
, void *dev_id
);
1012 extern void do_ide_request(struct request_queue
*);
1014 void ide_init_disk(struct gendisk
*, ide_drive_t
*);
1016 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1017 extern int ide_scan_direction
;
1018 extern int __ide_pci_register_driver(struct pci_driver
*driver
, struct module
*owner
, const char *mod_name
);
1019 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1021 #define ide_pci_register_driver(d) pci_register_driver(d)
1024 void ide_pci_setup_ports(struct pci_dev
*, const struct ide_port_info
*, int, u8
*);
1025 void ide_setup_pci_noise(struct pci_dev
*, const struct ide_port_info
*);
1027 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1028 void ide_hwif_setup_dma(ide_hwif_t
*, const struct ide_port_info
*);
1030 static inline void ide_hwif_setup_dma(ide_hwif_t
*hwif
,
1031 const struct ide_port_info
*d
) { }
1034 extern void default_hwif_iops(ide_hwif_t
*);
1035 extern void default_hwif_mmiops(ide_hwif_t
*);
1036 extern void default_hwif_transport(ide_hwif_t
*);
1038 typedef struct ide_pci_enablebit_s
{
1039 u8 reg
; /* byte pci reg holding the enable-bit */
1040 u8 mask
; /* mask to isolate the enable-bit */
1041 u8 val
; /* value of masked reg when "enabled" */
1042 } ide_pci_enablebit_t
;
1045 /* Uses ISA control ports not PCI ones. */
1046 IDE_HFLAG_ISA_PORTS
= (1 << 0),
1047 /* single port device */
1048 IDE_HFLAG_SINGLE
= (1 << 1),
1049 /* don't use legacy PIO blacklist */
1050 IDE_HFLAG_PIO_NO_BLACKLIST
= (1 << 2),
1051 /* don't use conservative PIO "downgrade" */
1052 IDE_HFLAG_PIO_NO_DOWNGRADE
= (1 << 3),
1053 /* use PIO8/9 for prefetch off/on */
1054 IDE_HFLAG_ABUSE_PREFETCH
= (1 << 4),
1055 /* use PIO6/7 for fast-devsel off/on */
1056 IDE_HFLAG_ABUSE_FAST_DEVSEL
= (1 << 5),
1057 /* use 100-102 and 200-202 PIO values to set DMA modes */
1058 IDE_HFLAG_ABUSE_DMA_MODES
= (1 << 6),
1060 * keep DMA setting when programming PIO mode, may be used only
1061 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1063 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA
= (1 << 7),
1064 /* program host for the transfer mode after programming device */
1065 IDE_HFLAG_POST_SET_MODE
= (1 << 8),
1066 /* don't program host/device for the transfer mode ("smart" hosts) */
1067 IDE_HFLAG_NO_SET_MODE
= (1 << 9),
1068 /* trust BIOS for programming chipset/device for DMA */
1069 IDE_HFLAG_TRUST_BIOS_FOR_DMA
= (1 << 10),
1070 /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */
1071 IDE_HFLAG_VDMA
= (1 << 11),
1072 /* ATAPI DMA is unsupported */
1073 IDE_HFLAG_NO_ATAPI_DMA
= (1 << 12),
1074 /* set if host is a "bootable" controller */
1075 IDE_HFLAG_BOOTABLE
= (1 << 13),
1076 /* host doesn't support DMA */
1077 IDE_HFLAG_NO_DMA
= (1 << 14),
1078 /* check if host is PCI IDE device before allowing DMA */
1079 IDE_HFLAG_NO_AUTODMA
= (1 << 15),
1080 /* don't autotune PIO */
1081 IDE_HFLAG_NO_AUTOTUNE
= (1 << 16),
1082 /* host is CS5510/CS5520 */
1083 IDE_HFLAG_CS5520
= IDE_HFLAG_VDMA
,
1085 IDE_HFLAG_NO_LBA48
= (1 << 17),
1087 IDE_HFLAG_NO_LBA48_DMA
= (1 << 18),
1088 /* data FIFO is cleared by an error */
1089 IDE_HFLAG_ERROR_STOPS_FIFO
= (1 << 19),
1090 /* serialize ports */
1091 IDE_HFLAG_SERIALIZE
= (1 << 20),
1092 /* use legacy IRQs */
1093 IDE_HFLAG_LEGACY_IRQS
= (1 << 21),
1094 /* force use of legacy IRQs */
1095 IDE_HFLAG_FORCE_LEGACY_IRQS
= (1 << 22),
1096 /* limit LBA48 requests to 256 sectors */
1097 IDE_HFLAG_RQSIZE_256
= (1 << 23),
1098 /* use 32-bit I/O ops */
1099 IDE_HFLAG_IO_32BIT
= (1 << 24),
1101 IDE_HFLAG_UNMASK_IRQS
= (1 << 25),
1102 IDE_HFLAG_ABUSE_SET_DMA_MODE
= (1 << 26),
1103 /* host is CY82C693 */
1104 IDE_HFLAG_CY82C693
= (1 << 27),
1105 /* force host out of "simplex" mode */
1106 IDE_HFLAG_CLEAR_SIMPLEX
= (1 << 28),
1107 /* DSC overlap is unsupported */
1108 IDE_HFLAG_NO_DSC
= (1 << 29),
1109 /* never use 32-bit I/O ops */
1110 IDE_HFLAG_NO_IO_32BIT
= (1 << 30),
1111 /* never unmask IRQs */
1112 IDE_HFLAG_NO_UNMASK_IRQS
= (1 << 31),
1115 #ifdef CONFIG_BLK_DEV_OFFBOARD
1116 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_BOOTABLE
1118 # define IDE_HFLAG_OFF_BOARD 0
1121 struct ide_port_info
{
1123 unsigned int (*init_chipset
)(struct pci_dev
*, const char *);
1124 void (*init_iops
)(ide_hwif_t
*);
1125 void (*init_hwif
)(ide_hwif_t
*);
1126 void (*init_dma
)(ide_hwif_t
*, unsigned long);
1127 ide_pci_enablebit_t enablebits
[2];
1128 hwif_chipset_t chipset
;
1137 int ide_setup_pci_device(struct pci_dev
*, const struct ide_port_info
*);
1138 int ide_setup_pci_devices(struct pci_dev
*, struct pci_dev
*, const struct ide_port_info
*);
1140 void ide_map_sg(ide_drive_t
*, struct request
*);
1141 void ide_init_sg_cmd(ide_drive_t
*, struct request
*);
1143 #define BAD_DMA_DRIVE 0
1144 #define GOOD_DMA_DRIVE 1
1146 struct drive_list_entry
{
1147 const char *id_model
;
1148 const char *id_firmware
;
1151 int ide_in_drive_list(struct hd_driveid
*, const struct drive_list_entry
*);
1153 #ifdef CONFIG_BLK_DEV_IDEDMA
1154 int __ide_dma_bad_drive(ide_drive_t
*);
1155 int ide_id_dma_bug(ide_drive_t
*);
1157 u8
ide_find_dma_mode(ide_drive_t
*, u8
);
1159 static inline u8
ide_max_dma_mode(ide_drive_t
*drive
)
1161 return ide_find_dma_mode(drive
, XFER_UDMA_6
);
1164 void ide_dma_off_quietly(ide_drive_t
*);
1165 void ide_dma_off(ide_drive_t
*);
1166 void ide_dma_on(ide_drive_t
*);
1167 int ide_set_dma(ide_drive_t
*);
1168 ide_startstop_t
ide_dma_intr(ide_drive_t
*);
1170 int ide_build_sglist(ide_drive_t
*, struct request
*);
1171 void ide_destroy_dmatable(ide_drive_t
*);
1173 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1174 extern int ide_build_dmatable(ide_drive_t
*, struct request
*);
1175 extern int ide_release_dma(ide_hwif_t
*);
1176 extern void ide_setup_dma(ide_hwif_t
*, unsigned long);
1178 void ide_dma_host_set(ide_drive_t
*, int);
1179 extern int ide_dma_setup(ide_drive_t
*);
1180 extern void ide_dma_start(ide_drive_t
*);
1181 extern int __ide_dma_end(ide_drive_t
*);
1182 extern void ide_dma_lost_irq(ide_drive_t
*);
1183 extern void ide_dma_timeout(ide_drive_t
*);
1184 #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
1187 static inline int ide_id_dma_bug(ide_drive_t
*drive
) { return 0; }
1188 static inline u8
ide_find_dma_mode(ide_drive_t
*drive
, u8 speed
) { return 0; }
1189 static inline u8
ide_max_dma_mode(ide_drive_t
*drive
) { return 0; }
1190 static inline void ide_dma_off_quietly(ide_drive_t
*drive
) { ; }
1191 static inline void ide_dma_off(ide_drive_t
*drive
) { ; }
1192 static inline void ide_dma_on(ide_drive_t
*drive
) { ; }
1193 static inline void ide_dma_verbose(ide_drive_t
*drive
) { ; }
1194 static inline int ide_set_dma(ide_drive_t
*drive
) { return 1; }
1195 #endif /* CONFIG_BLK_DEV_IDEDMA */
1197 #ifndef CONFIG_BLK_DEV_IDEDMA_PCI
1198 static inline void ide_release_dma(ide_hwif_t
*drive
) {;}
1201 #ifdef CONFIG_BLK_DEV_IDEACPI
1202 extern int ide_acpi_exec_tfs(ide_drive_t
*drive
);
1203 extern void ide_acpi_get_timing(ide_hwif_t
*hwif
);
1204 extern void ide_acpi_push_timing(ide_hwif_t
*hwif
);
1205 extern void ide_acpi_init(ide_hwif_t
*hwif
);
1206 void ide_acpi_port_init_devices(ide_hwif_t
*);
1207 extern void ide_acpi_set_state(ide_hwif_t
*hwif
, int on
);
1209 static inline int ide_acpi_exec_tfs(ide_drive_t
*drive
) { return 0; }
1210 static inline void ide_acpi_get_timing(ide_hwif_t
*hwif
) { ; }
1211 static inline void ide_acpi_push_timing(ide_hwif_t
*hwif
) { ; }
1212 static inline void ide_acpi_init(ide_hwif_t
*hwif
) { ; }
1213 static inline void ide_acpi_port_init_devices(ide_hwif_t
*hwif
) { ; }
1214 static inline void ide_acpi_set_state(ide_hwif_t
*hwif
, int on
) {}
1217 void ide_remove_port_from_hwgroup(ide_hwif_t
*);
1218 extern int ide_hwif_request_regions(ide_hwif_t
*hwif
);
1219 extern void ide_hwif_release_regions(ide_hwif_t
* hwif
);
1220 void ide_unregister(unsigned int, int, int);
1222 void ide_register_region(struct gendisk
*);
1223 void ide_unregister_region(struct gendisk
*);
1225 void ide_undecoded_slave(ide_drive_t
*);
1227 int ide_device_add_all(u8
*idx
, const struct ide_port_info
*);
1228 int ide_device_add(u8 idx
[4], const struct ide_port_info
*);
1230 static inline void *ide_get_hwifdata (ide_hwif_t
* hwif
)
1232 return hwif
->hwif_data
;
1235 static inline void ide_set_hwifdata (ide_hwif_t
* hwif
, void *data
)
1237 hwif
->hwif_data
= data
;
1240 const char *ide_xfer_verbose(u8 mode
);
1241 extern void ide_toggle_bounce(ide_drive_t
*drive
, int on
);
1242 extern int ide_set_xfer_rate(ide_drive_t
*drive
, u8 rate
);
1244 static inline int ide_dev_has_iordy(struct hd_driveid
*id
)
1246 return ((id
->field_valid
& 2) && (id
->capability
& 8)) ? 1 : 0;
1249 static inline int ide_dev_is_sata(struct hd_driveid
*id
)
1252 * See if word 93 is 0 AND drive is at least ATA-5 compatible
1253 * verifying that word 80 by casting it to a signed type --
1254 * this trick allows us to filter out the reserved values of
1255 * 0x0000 and 0xffff along with the earlier ATA revisions...
1257 if (id
->hw_config
== 0 && (short)id
->major_rev_num
>= 0x0020)
1262 u64
ide_get_lba_addr(struct ide_taskfile
*, int);
1263 u8
ide_dump_status(ide_drive_t
*, const char *, u8
);
1265 typedef struct ide_pio_timings_s
{
1266 int setup_time
; /* Address setup (ns) minimum */
1267 int active_time
; /* Active pulse (ns) minimum */
1268 int cycle_time
; /* Cycle time (ns) minimum = */
1269 /* active + recovery (+ setup for some chips) */
1270 } ide_pio_timings_t
;
1272 unsigned int ide_pio_cycle_time(ide_drive_t
*, u8
);
1273 u8
ide_get_best_pio_mode(ide_drive_t
*, u8
, u8
);
1274 extern const ide_pio_timings_t ide_pio_timings
[6];
1276 int ide_set_pio_mode(ide_drive_t
*, u8
);
1277 int ide_set_dma_mode(ide_drive_t
*, u8
);
1279 void ide_set_pio(ide_drive_t
*, u8
);
1281 static inline void ide_set_max_pio(ide_drive_t
*drive
)
1283 ide_set_pio(drive
, 255);
1286 extern spinlock_t ide_lock
;
1287 extern struct mutex ide_cfg_mtx
;
1289 * Structure locking:
1291 * ide_cfg_mtx and ide_lock together protect changes to
1292 * ide_hwif_t->{next,hwgroup}
1295 * ide_hwgroup_t->busy: ide_lock
1296 * ide_hwgroup_t->hwif: ide_lock
1297 * ide_hwif_t->mate: constant, no locking
1298 * ide_drive_t->hwif: constant, no locking
1301 #define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
1303 extern struct bus_type ide_bus_type
;
1305 /* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1306 #define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1308 /* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1309 #define ide_id_has_flush_cache_ext(id) \
1310 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1312 static inline void ide_dump_identify(u8
*id
)
1314 print_hex_dump(KERN_INFO
, "", DUMP_PREFIX_NONE
, 16, 2, id
, 512, 0);
1317 static inline int hwif_to_node(ide_hwif_t
*hwif
)
1319 struct pci_dev
*dev
= to_pci_dev(hwif
->dev
);
1320 return dev
? pcibus_to_node(dev
->bus
) : -1;
1323 static inline ide_drive_t
*ide_get_paired_drive(ide_drive_t
*drive
)
1325 ide_hwif_t
*hwif
= HWIF(drive
);
1327 return &hwif
->drives
[(drive
->dn
^ 1) & 1];
1330 static inline void ide_set_irq(ide_drive_t
*drive
, int on
)
1332 drive
->hwif
->OUTB(drive
->ctl
| (on
? 0 : 2), IDE_CONTROL_REG
);