3 * Written by Mark Hemment, 1996/97.
4 * (markhe@nextd.demon.co.uk)
6 * kmem_cache_destroy() + some cleanup - 1999 Andrea Arcangeli
8 * Major cleanup, different bufctl logic, per-cpu arrays
9 * (c) 2000 Manfred Spraul
11 * Cleanup, make the head arrays unconditional, preparation for NUMA
12 * (c) 2002 Manfred Spraul
14 * An implementation of the Slab Allocator as described in outline in;
15 * UNIX Internals: The New Frontiers by Uresh Vahalia
16 * Pub: Prentice Hall ISBN 0-13-101908-2
17 * or with a little more detail in;
18 * The Slab Allocator: An Object-Caching Kernel Memory Allocator
19 * Jeff Bonwick (Sun Microsystems).
20 * Presented at: USENIX Summer 1994 Technical Conference
22 * The memory is organized in caches, one cache for each object type.
23 * (e.g. inode_cache, dentry_cache, buffer_head, vm_area_struct)
24 * Each cache consists out of many slabs (they are small (usually one
25 * page long) and always contiguous), and each slab contains multiple
26 * initialized objects.
28 * This means, that your constructor is used only for newly allocated
29 * slabs and you must pass objects with the same intializations to
32 * Each cache can only support one memory type (GFP_DMA, GFP_HIGHMEM,
33 * normal). If you need a special memory type, then must create a new
34 * cache for that memory type.
36 * In order to reduce fragmentation, the slabs are sorted in 3 groups:
37 * full slabs with 0 free objects
39 * empty slabs with no allocated objects
41 * If partial slabs exist, then new allocations come from these slabs,
42 * otherwise from empty slabs or new slabs are allocated.
44 * kmem_cache_destroy() CAN CRASH if you try to allocate from the cache
45 * during kmem_cache_destroy(). The caller must prevent concurrent allocs.
47 * Each cache has a short per-cpu head array, most allocs
48 * and frees go into that array, and if that array overflows, then 1/2
49 * of the entries in the array are given back into the global cache.
50 * The head array is strictly LIFO and should improve the cache hit rates.
51 * On SMP, it additionally reduces the spinlock operations.
53 * The c_cpuarray may not be read with enabled local interrupts -
54 * it's changed with a smp_call_function().
56 * SMP synchronization:
57 * constructors and destructors are called without any locking.
58 * Several members in struct kmem_cache and struct slab never change, they
59 * are accessed without any locking.
60 * The per-cpu arrays are never accessed from the wrong cpu, no locking,
61 * and local interrupts are disabled so slab code is preempt-safe.
62 * The non-constant members are protected with a per-cache irq spinlock.
64 * Many thanks to Mark Hemment, who wrote another per-cpu slab patch
65 * in 2000 - many ideas in the current implementation are derived from
68 * Further notes from the original documentation:
70 * 11 April '97. Started multi-threading - markhe
71 * The global cache-chain is protected by the mutex 'cache_chain_mutex'.
72 * The sem is only needed when accessing/extending the cache-chain, which
73 * can never happen inside an interrupt (kmem_cache_create(),
74 * kmem_cache_shrink() and kmem_cache_reap()).
76 * At present, each engine can be growing a cache. This should be blocked.
78 * 15 March 2005. NUMA slab allocator.
79 * Shai Fultheim <shai@scalex86.org>.
80 * Shobhit Dayal <shobhit@calsoftinc.com>
81 * Alok N Kataria <alokk@calsoftinc.com>
82 * Christoph Lameter <christoph@lameter.com>
84 * Modified the slab allocator to be node aware on NUMA systems.
85 * Each node has its own list of partial, free and full slabs.
86 * All object allocations for a node occur from node specific slab lists.
89 #include <linux/slab.h>
91 #include <linux/poison.h>
92 #include <linux/swap.h>
93 #include <linux/cache.h>
94 #include <linux/interrupt.h>
95 #include <linux/init.h>
96 #include <linux/compiler.h>
97 #include <linux/cpuset.h>
98 #include <linux/seq_file.h>
99 #include <linux/notifier.h>
100 #include <linux/kallsyms.h>
101 #include <linux/cpu.h>
102 #include <linux/sysctl.h>
103 #include <linux/module.h>
104 #include <linux/rcupdate.h>
105 #include <linux/string.h>
106 #include <linux/uaccess.h>
107 #include <linux/nodemask.h>
108 #include <linux/mempolicy.h>
109 #include <linux/mutex.h>
110 #include <linux/fault-inject.h>
111 #include <linux/rtmutex.h>
112 #include <linux/reciprocal_div.h>
114 #include <asm/cacheflush.h>
115 #include <asm/tlbflush.h>
116 #include <asm/page.h>
119 * DEBUG - 1 for kmem_cache_create() to honour; SLAB_DEBUG_INITIAL,
120 * SLAB_RED_ZONE & SLAB_POISON.
121 * 0 for faster, smaller code (especially in the critical paths).
123 * STATS - 1 to collect stats for /proc/slabinfo.
124 * 0 for faster, smaller code (especially in the critical paths).
126 * FORCED_DEBUG - 1 enables SLAB_RED_ZONE and SLAB_POISON (if possible)
129 #ifdef CONFIG_DEBUG_SLAB
132 #define FORCED_DEBUG 1
136 #define FORCED_DEBUG 0
139 /* Shouldn't this be in a header file somewhere? */
140 #define BYTES_PER_WORD sizeof(void *)
142 #ifndef cache_line_size
143 #define cache_line_size() L1_CACHE_BYTES
146 #ifndef ARCH_KMALLOC_MINALIGN
148 * Enforce a minimum alignment for the kmalloc caches.
149 * Usually, the kmalloc caches are cache_line_size() aligned, except when
150 * DEBUG and FORCED_DEBUG are enabled, then they are BYTES_PER_WORD aligned.
151 * Some archs want to perform DMA into kmalloc caches and need a guaranteed
152 * alignment larger than BYTES_PER_WORD. ARCH_KMALLOC_MINALIGN allows that.
153 * Note that this flag disables some debug features.
155 #define ARCH_KMALLOC_MINALIGN 0
158 #ifndef ARCH_SLAB_MINALIGN
160 * Enforce a minimum alignment for all caches.
161 * Intended for archs that get misalignment faults even for BYTES_PER_WORD
162 * aligned buffers. Includes ARCH_KMALLOC_MINALIGN.
163 * If possible: Do not enable this flag for CONFIG_DEBUG_SLAB, it disables
164 * some debug features.
166 #define ARCH_SLAB_MINALIGN 0
169 #ifndef ARCH_KMALLOC_FLAGS
170 #define ARCH_KMALLOC_FLAGS SLAB_HWCACHE_ALIGN
173 /* Legal flag mask for kmem_cache_create(). */
175 # define CREATE_MASK (SLAB_DEBUG_INITIAL | SLAB_RED_ZONE | \
176 SLAB_POISON | SLAB_HWCACHE_ALIGN | \
178 SLAB_MUST_HWCACHE_ALIGN | SLAB_STORE_USER | \
179 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
180 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD)
182 # define CREATE_MASK (SLAB_HWCACHE_ALIGN | \
183 SLAB_CACHE_DMA | SLAB_MUST_HWCACHE_ALIGN | \
184 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
185 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD)
191 * Bufctl's are used for linking objs within a slab
194 * This implementation relies on "struct page" for locating the cache &
195 * slab an object belongs to.
196 * This allows the bufctl structure to be small (one int), but limits
197 * the number of objects a slab (not a cache) can contain when off-slab
198 * bufctls are used. The limit is the size of the largest general cache
199 * that does not use off-slab slabs.
200 * For 32bit archs with 4 kB pages, is this 56.
201 * This is not serious, as it is only for large objects, when it is unwise
202 * to have too many per slab.
203 * Note: This limit can be raised by introducing a general cache whose size
204 * is less than 512 (PAGE_SIZE<<3), but greater than 256.
207 typedef unsigned int kmem_bufctl_t
;
208 #define BUFCTL_END (((kmem_bufctl_t)(~0U))-0)
209 #define BUFCTL_FREE (((kmem_bufctl_t)(~0U))-1)
210 #define BUFCTL_ACTIVE (((kmem_bufctl_t)(~0U))-2)
211 #define SLAB_LIMIT (((kmem_bufctl_t)(~0U))-3)
216 * Manages the objs in a slab. Placed either at the beginning of mem allocated
217 * for a slab, or allocated from an general cache.
218 * Slabs are chained into three list: fully used, partial, fully free slabs.
221 struct list_head list
;
222 unsigned long colouroff
;
223 void *s_mem
; /* including colour offset */
224 unsigned int inuse
; /* num of objs active in slab */
226 unsigned short nodeid
;
232 * slab_destroy on a SLAB_DESTROY_BY_RCU cache uses this structure to
233 * arrange for kmem_freepages to be called via RCU. This is useful if
234 * we need to approach a kernel structure obliquely, from its address
235 * obtained without the usual locking. We can lock the structure to
236 * stabilize it and check it's still at the given address, only if we
237 * can be sure that the memory has not been meanwhile reused for some
238 * other kind of object (which our subsystem's lock might corrupt).
240 * rcu_read_lock before reading the address, then rcu_read_unlock after
241 * taking the spinlock within the structure expected at that address.
243 * We assume struct slab_rcu can overlay struct slab when destroying.
246 struct rcu_head head
;
247 struct kmem_cache
*cachep
;
255 * - LIFO ordering, to hand out cache-warm objects from _alloc
256 * - reduce the number of linked list operations
257 * - reduce spinlock operations
259 * The limit is stored in the per-cpu structure to reduce the data cache
266 unsigned int batchcount
;
267 unsigned int touched
;
270 * Must have this definition in here for the proper
271 * alignment of array_cache. Also simplifies accessing
273 * [0] is for gcc 2.95. It should really be [].
278 * bootstrap: The caches do not work without cpuarrays anymore, but the
279 * cpuarrays are allocated from the generic caches...
281 #define BOOT_CPUCACHE_ENTRIES 1
282 struct arraycache_init
{
283 struct array_cache cache
;
284 void *entries
[BOOT_CPUCACHE_ENTRIES
];
288 * The slab lists for all objects.
291 struct list_head slabs_partial
; /* partial list first, better asm code */
292 struct list_head slabs_full
;
293 struct list_head slabs_free
;
294 unsigned long free_objects
;
295 unsigned int free_limit
;
296 unsigned int colour_next
; /* Per-node cache coloring */
297 spinlock_t list_lock
;
298 struct array_cache
*shared
; /* shared per node */
299 struct array_cache
**alien
; /* on other nodes */
300 unsigned long next_reap
; /* updated without locking */
301 int free_touched
; /* updated without locking */
305 * Need this for bootstrapping a per node allocator.
307 #define NUM_INIT_LISTS (2 * MAX_NUMNODES + 1)
308 struct kmem_list3 __initdata initkmem_list3
[NUM_INIT_LISTS
];
309 #define CACHE_CACHE 0
311 #define SIZE_L3 (1 + MAX_NUMNODES)
313 static int drain_freelist(struct kmem_cache
*cache
,
314 struct kmem_list3
*l3
, int tofree
);
315 static void free_block(struct kmem_cache
*cachep
, void **objpp
, int len
,
317 static int enable_cpucache(struct kmem_cache
*cachep
);
318 static void cache_reap(struct work_struct
*unused
);
321 * This function must be completely optimized away if a constant is passed to
322 * it. Mostly the same as what is in linux/slab.h except it returns an index.
324 static __always_inline
int index_of(const size_t size
)
326 extern void __bad_size(void);
328 if (__builtin_constant_p(size
)) {
336 #include "linux/kmalloc_sizes.h"
344 static int slab_early_init
= 1;
346 #define INDEX_AC index_of(sizeof(struct arraycache_init))
347 #define INDEX_L3 index_of(sizeof(struct kmem_list3))
349 static void kmem_list3_init(struct kmem_list3
*parent
)
351 INIT_LIST_HEAD(&parent
->slabs_full
);
352 INIT_LIST_HEAD(&parent
->slabs_partial
);
353 INIT_LIST_HEAD(&parent
->slabs_free
);
354 parent
->shared
= NULL
;
355 parent
->alien
= NULL
;
356 parent
->colour_next
= 0;
357 spin_lock_init(&parent
->list_lock
);
358 parent
->free_objects
= 0;
359 parent
->free_touched
= 0;
362 #define MAKE_LIST(cachep, listp, slab, nodeid) \
364 INIT_LIST_HEAD(listp); \
365 list_splice(&(cachep->nodelists[nodeid]->slab), listp); \
368 #define MAKE_ALL_LISTS(cachep, ptr, nodeid) \
370 MAKE_LIST((cachep), (&(ptr)->slabs_full), slabs_full, nodeid); \
371 MAKE_LIST((cachep), (&(ptr)->slabs_partial), slabs_partial, nodeid); \
372 MAKE_LIST((cachep), (&(ptr)->slabs_free), slabs_free, nodeid); \
382 /* 1) per-cpu data, touched during every alloc/free */
383 struct array_cache
*array
[NR_CPUS
];
384 /* 2) Cache tunables. Protected by cache_chain_mutex */
385 unsigned int batchcount
;
389 unsigned int buffer_size
;
390 u32 reciprocal_buffer_size
;
391 /* 3) touched by every alloc & free from the backend */
393 unsigned int flags
; /* constant flags */
394 unsigned int num
; /* # of objs per slab */
396 /* 4) cache_grow/shrink */
397 /* order of pgs per slab (2^n) */
398 unsigned int gfporder
;
400 /* force GFP flags, e.g. GFP_DMA */
403 size_t colour
; /* cache colouring range */
404 unsigned int colour_off
; /* colour offset */
405 struct kmem_cache
*slabp_cache
;
406 unsigned int slab_size
;
407 unsigned int dflags
; /* dynamic flags */
409 /* constructor func */
410 void (*ctor
) (void *, struct kmem_cache
*, unsigned long);
412 /* de-constructor func */
413 void (*dtor
) (void *, struct kmem_cache
*, unsigned long);
415 /* 5) cache creation/removal */
417 struct list_head next
;
421 unsigned long num_active
;
422 unsigned long num_allocations
;
423 unsigned long high_mark
;
425 unsigned long reaped
;
426 unsigned long errors
;
427 unsigned long max_freeable
;
428 unsigned long node_allocs
;
429 unsigned long node_frees
;
430 unsigned long node_overflow
;
438 * If debugging is enabled, then the allocator can add additional
439 * fields and/or padding to every object. buffer_size contains the total
440 * object size including these internal fields, the following two
441 * variables contain the offset to the user object and its size.
447 * We put nodelists[] at the end of kmem_cache, because we want to size
448 * this array to nr_node_ids slots instead of MAX_NUMNODES
449 * (see kmem_cache_init())
450 * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache
451 * is statically defined, so we reserve the max number of nodes.
453 struct kmem_list3
*nodelists
[MAX_NUMNODES
];
455 * Do not add fields after nodelists[]
459 #define CFLGS_OFF_SLAB (0x80000000UL)
460 #define OFF_SLAB(x) ((x)->flags & CFLGS_OFF_SLAB)
462 #define BATCHREFILL_LIMIT 16
464 * Optimization question: fewer reaps means less probability for unnessary
465 * cpucache drain/refill cycles.
467 * OTOH the cpuarrays can contain lots of objects,
468 * which could lock up otherwise freeable slabs.
470 #define REAPTIMEOUT_CPUC (2*HZ)
471 #define REAPTIMEOUT_LIST3 (4*HZ)
474 #define STATS_INC_ACTIVE(x) ((x)->num_active++)
475 #define STATS_DEC_ACTIVE(x) ((x)->num_active--)
476 #define STATS_INC_ALLOCED(x) ((x)->num_allocations++)
477 #define STATS_INC_GROWN(x) ((x)->grown++)
478 #define STATS_ADD_REAPED(x,y) ((x)->reaped += (y))
479 #define STATS_SET_HIGH(x) \
481 if ((x)->num_active > (x)->high_mark) \
482 (x)->high_mark = (x)->num_active; \
484 #define STATS_INC_ERR(x) ((x)->errors++)
485 #define STATS_INC_NODEALLOCS(x) ((x)->node_allocs++)
486 #define STATS_INC_NODEFREES(x) ((x)->node_frees++)
487 #define STATS_INC_ACOVERFLOW(x) ((x)->node_overflow++)
488 #define STATS_SET_FREEABLE(x, i) \
490 if ((x)->max_freeable < i) \
491 (x)->max_freeable = i; \
493 #define STATS_INC_ALLOCHIT(x) atomic_inc(&(x)->allochit)
494 #define STATS_INC_ALLOCMISS(x) atomic_inc(&(x)->allocmiss)
495 #define STATS_INC_FREEHIT(x) atomic_inc(&(x)->freehit)
496 #define STATS_INC_FREEMISS(x) atomic_inc(&(x)->freemiss)
498 #define STATS_INC_ACTIVE(x) do { } while (0)
499 #define STATS_DEC_ACTIVE(x) do { } while (0)
500 #define STATS_INC_ALLOCED(x) do { } while (0)
501 #define STATS_INC_GROWN(x) do { } while (0)
502 #define STATS_ADD_REAPED(x,y) do { } while (0)
503 #define STATS_SET_HIGH(x) do { } while (0)
504 #define STATS_INC_ERR(x) do { } while (0)
505 #define STATS_INC_NODEALLOCS(x) do { } while (0)
506 #define STATS_INC_NODEFREES(x) do { } while (0)
507 #define STATS_INC_ACOVERFLOW(x) do { } while (0)
508 #define STATS_SET_FREEABLE(x, i) do { } while (0)
509 #define STATS_INC_ALLOCHIT(x) do { } while (0)
510 #define STATS_INC_ALLOCMISS(x) do { } while (0)
511 #define STATS_INC_FREEHIT(x) do { } while (0)
512 #define STATS_INC_FREEMISS(x) do { } while (0)
518 * memory layout of objects:
520 * 0 .. cachep->obj_offset - BYTES_PER_WORD - 1: padding. This ensures that
521 * the end of an object is aligned with the end of the real
522 * allocation. Catches writes behind the end of the allocation.
523 * cachep->obj_offset - BYTES_PER_WORD .. cachep->obj_offset - 1:
525 * cachep->obj_offset: The real object.
526 * cachep->buffer_size - 2* BYTES_PER_WORD: redzone word [BYTES_PER_WORD long]
527 * cachep->buffer_size - 1* BYTES_PER_WORD: last caller address
528 * [BYTES_PER_WORD long]
530 static int obj_offset(struct kmem_cache
*cachep
)
532 return cachep
->obj_offset
;
535 static int obj_size(struct kmem_cache
*cachep
)
537 return cachep
->obj_size
;
540 static unsigned long *dbg_redzone1(struct kmem_cache
*cachep
, void *objp
)
542 BUG_ON(!(cachep
->flags
& SLAB_RED_ZONE
));
543 return (unsigned long*) (objp
+obj_offset(cachep
)-BYTES_PER_WORD
);
546 static unsigned long *dbg_redzone2(struct kmem_cache
*cachep
, void *objp
)
548 BUG_ON(!(cachep
->flags
& SLAB_RED_ZONE
));
549 if (cachep
->flags
& SLAB_STORE_USER
)
550 return (unsigned long *)(objp
+ cachep
->buffer_size
-
552 return (unsigned long *)(objp
+ cachep
->buffer_size
- BYTES_PER_WORD
);
555 static void **dbg_userword(struct kmem_cache
*cachep
, void *objp
)
557 BUG_ON(!(cachep
->flags
& SLAB_STORE_USER
));
558 return (void **)(objp
+ cachep
->buffer_size
- BYTES_PER_WORD
);
563 #define obj_offset(x) 0
564 #define obj_size(cachep) (cachep->buffer_size)
565 #define dbg_redzone1(cachep, objp) ({BUG(); (unsigned long *)NULL;})
566 #define dbg_redzone2(cachep, objp) ({BUG(); (unsigned long *)NULL;})
567 #define dbg_userword(cachep, objp) ({BUG(); (void **)NULL;})
572 * Maximum size of an obj (in 2^order pages) and absolute limit for the gfp
575 #if defined(CONFIG_LARGE_ALLOCS)
576 #define MAX_OBJ_ORDER 13 /* up to 32Mb */
577 #define MAX_GFP_ORDER 13 /* up to 32Mb */
578 #elif defined(CONFIG_MMU)
579 #define MAX_OBJ_ORDER 5 /* 32 pages */
580 #define MAX_GFP_ORDER 5 /* 32 pages */
582 #define MAX_OBJ_ORDER 8 /* up to 1Mb */
583 #define MAX_GFP_ORDER 8 /* up to 1Mb */
587 * Do not go above this order unless 0 objects fit into the slab.
589 #define BREAK_GFP_ORDER_HI 1
590 #define BREAK_GFP_ORDER_LO 0
591 static int slab_break_gfp_order
= BREAK_GFP_ORDER_LO
;
594 * Functions for storing/retrieving the cachep and or slab from the page
595 * allocator. These are used to find the slab an obj belongs to. With kfree(),
596 * these are used to find the cache which an obj belongs to.
598 static inline void page_set_cache(struct page
*page
, struct kmem_cache
*cache
)
600 page
->lru
.next
= (struct list_head
*)cache
;
603 static inline struct kmem_cache
*page_get_cache(struct page
*page
)
605 if (unlikely(PageCompound(page
)))
606 page
= (struct page
*)page_private(page
);
607 BUG_ON(!PageSlab(page
));
608 return (struct kmem_cache
*)page
->lru
.next
;
611 static inline void page_set_slab(struct page
*page
, struct slab
*slab
)
613 page
->lru
.prev
= (struct list_head
*)slab
;
616 static inline struct slab
*page_get_slab(struct page
*page
)
618 if (unlikely(PageCompound(page
)))
619 page
= (struct page
*)page_private(page
);
620 BUG_ON(!PageSlab(page
));
621 return (struct slab
*)page
->lru
.prev
;
624 static inline struct kmem_cache
*virt_to_cache(const void *obj
)
626 struct page
*page
= virt_to_page(obj
);
627 return page_get_cache(page
);
630 static inline struct slab
*virt_to_slab(const void *obj
)
632 struct page
*page
= virt_to_page(obj
);
633 return page_get_slab(page
);
636 static inline void *index_to_obj(struct kmem_cache
*cache
, struct slab
*slab
,
639 return slab
->s_mem
+ cache
->buffer_size
* idx
;
643 * We want to avoid an expensive divide : (offset / cache->buffer_size)
644 * Using the fact that buffer_size is a constant for a particular cache,
645 * we can replace (offset / cache->buffer_size) by
646 * reciprocal_divide(offset, cache->reciprocal_buffer_size)
648 static inline unsigned int obj_to_index(const struct kmem_cache
*cache
,
649 const struct slab
*slab
, void *obj
)
651 u32 offset
= (obj
- slab
->s_mem
);
652 return reciprocal_divide(offset
, cache
->reciprocal_buffer_size
);
656 * These are the default caches for kmalloc. Custom caches can have other sizes.
658 struct cache_sizes malloc_sizes
[] = {
659 #define CACHE(x) { .cs_size = (x) },
660 #include <linux/kmalloc_sizes.h>
664 EXPORT_SYMBOL(malloc_sizes
);
666 /* Must match cache_sizes above. Out of line to keep cache footprint low. */
672 static struct cache_names __initdata cache_names
[] = {
673 #define CACHE(x) { .name = "size-" #x, .name_dma = "size-" #x "(DMA)" },
674 #include <linux/kmalloc_sizes.h>
679 static struct arraycache_init initarray_cache __initdata
=
680 { {0, BOOT_CPUCACHE_ENTRIES
, 1, 0} };
681 static struct arraycache_init initarray_generic
=
682 { {0, BOOT_CPUCACHE_ENTRIES
, 1, 0} };
684 /* internal cache of cache description objs */
685 static struct kmem_cache cache_cache
= {
687 .limit
= BOOT_CPUCACHE_ENTRIES
,
689 .buffer_size
= sizeof(struct kmem_cache
),
690 .name
= "kmem_cache",
693 #define BAD_ALIEN_MAGIC 0x01020304ul
695 #ifdef CONFIG_LOCKDEP
698 * Slab sometimes uses the kmalloc slabs to store the slab headers
699 * for other slabs "off slab".
700 * The locking for this is tricky in that it nests within the locks
701 * of all other slabs in a few places; to deal with this special
702 * locking we put on-slab caches into a separate lock-class.
704 * We set lock class for alien array caches which are up during init.
705 * The lock annotation will be lost if all cpus of a node goes down and
706 * then comes back up during hotplug
708 static struct lock_class_key on_slab_l3_key
;
709 static struct lock_class_key on_slab_alc_key
;
711 static inline void init_lock_keys(void)
715 struct cache_sizes
*s
= malloc_sizes
;
717 while (s
->cs_size
!= ULONG_MAX
) {
719 struct array_cache
**alc
;
721 struct kmem_list3
*l3
= s
->cs_cachep
->nodelists
[q
];
722 if (!l3
|| OFF_SLAB(s
->cs_cachep
))
724 lockdep_set_class(&l3
->list_lock
, &on_slab_l3_key
);
727 * FIXME: This check for BAD_ALIEN_MAGIC
728 * should go away when common slab code is taught to
729 * work even without alien caches.
730 * Currently, non NUMA code returns BAD_ALIEN_MAGIC
731 * for alloc_alien_cache,
733 if (!alc
|| (unsigned long)alc
== BAD_ALIEN_MAGIC
)
737 lockdep_set_class(&alc
[r
]->lock
,
745 static inline void init_lock_keys(void)
751 * 1. Guard access to the cache-chain.
752 * 2. Protect sanity of cpu_online_map against cpu hotplug events
754 static DEFINE_MUTEX(cache_chain_mutex
);
755 static struct list_head cache_chain
;
758 * chicken and egg problem: delay the per-cpu array allocation
759 * until the general caches are up.
769 * used by boot code to determine if it can use slab based allocator
771 int slab_is_available(void)
773 return g_cpucache_up
== FULL
;
776 static DEFINE_PER_CPU(struct delayed_work
, reap_work
);
778 static inline struct array_cache
*cpu_cache_get(struct kmem_cache
*cachep
)
780 return cachep
->array
[smp_processor_id()];
783 static inline struct kmem_cache
*__find_general_cachep(size_t size
,
786 struct cache_sizes
*csizep
= malloc_sizes
;
789 /* This happens if someone tries to call
790 * kmem_cache_create(), or __kmalloc(), before
791 * the generic caches are initialized.
793 BUG_ON(malloc_sizes
[INDEX_AC
].cs_cachep
== NULL
);
795 while (size
> csizep
->cs_size
)
799 * Really subtle: The last entry with cs->cs_size==ULONG_MAX
800 * has cs_{dma,}cachep==NULL. Thus no special case
801 * for large kmalloc calls required.
803 #ifdef CONFIG_ZONE_DMA
804 if (unlikely(gfpflags
& GFP_DMA
))
805 return csizep
->cs_dmacachep
;
807 return csizep
->cs_cachep
;
810 static struct kmem_cache
*kmem_find_general_cachep(size_t size
, gfp_t gfpflags
)
812 return __find_general_cachep(size
, gfpflags
);
815 static size_t slab_mgmt_size(size_t nr_objs
, size_t align
)
817 return ALIGN(sizeof(struct slab
)+nr_objs
*sizeof(kmem_bufctl_t
), align
);
821 * Calculate the number of objects and left-over bytes for a given buffer size.
823 static void cache_estimate(unsigned long gfporder
, size_t buffer_size
,
824 size_t align
, int flags
, size_t *left_over
,
829 size_t slab_size
= PAGE_SIZE
<< gfporder
;
832 * The slab management structure can be either off the slab or
833 * on it. For the latter case, the memory allocated for a
837 * - One kmem_bufctl_t for each object
838 * - Padding to respect alignment of @align
839 * - @buffer_size bytes for each object
841 * If the slab management structure is off the slab, then the
842 * alignment will already be calculated into the size. Because
843 * the slabs are all pages aligned, the objects will be at the
844 * correct alignment when allocated.
846 if (flags
& CFLGS_OFF_SLAB
) {
848 nr_objs
= slab_size
/ buffer_size
;
850 if (nr_objs
> SLAB_LIMIT
)
851 nr_objs
= SLAB_LIMIT
;
854 * Ignore padding for the initial guess. The padding
855 * is at most @align-1 bytes, and @buffer_size is at
856 * least @align. In the worst case, this result will
857 * be one greater than the number of objects that fit
858 * into the memory allocation when taking the padding
861 nr_objs
= (slab_size
- sizeof(struct slab
)) /
862 (buffer_size
+ sizeof(kmem_bufctl_t
));
865 * This calculated number will be either the right
866 * amount, or one greater than what we want.
868 if (slab_mgmt_size(nr_objs
, align
) + nr_objs
*buffer_size
872 if (nr_objs
> SLAB_LIMIT
)
873 nr_objs
= SLAB_LIMIT
;
875 mgmt_size
= slab_mgmt_size(nr_objs
, align
);
878 *left_over
= slab_size
- nr_objs
*buffer_size
- mgmt_size
;
881 #define slab_error(cachep, msg) __slab_error(__FUNCTION__, cachep, msg)
883 static void __slab_error(const char *function
, struct kmem_cache
*cachep
,
886 printk(KERN_ERR
"slab error in %s(): cache `%s': %s\n",
887 function
, cachep
->name
, msg
);
892 * By default on NUMA we use alien caches to stage the freeing of
893 * objects allocated from other nodes. This causes massive memory
894 * inefficiencies when using fake NUMA setup to split memory into a
895 * large number of small nodes, so it can be disabled on the command
899 static int use_alien_caches __read_mostly
= 1;
900 static int __init
noaliencache_setup(char *s
)
902 use_alien_caches
= 0;
905 __setup("noaliencache", noaliencache_setup
);
909 * Special reaping functions for NUMA systems called from cache_reap().
910 * These take care of doing round robin flushing of alien caches (containing
911 * objects freed on different nodes from which they were allocated) and the
912 * flushing of remote pcps by calling drain_node_pages.
914 static DEFINE_PER_CPU(unsigned long, reap_node
);
916 static void init_reap_node(int cpu
)
920 node
= next_node(cpu_to_node(cpu
), node_online_map
);
921 if (node
== MAX_NUMNODES
)
922 node
= first_node(node_online_map
);
924 per_cpu(reap_node
, cpu
) = node
;
927 static void next_reap_node(void)
929 int node
= __get_cpu_var(reap_node
);
932 * Also drain per cpu pages on remote zones
934 if (node
!= numa_node_id())
935 drain_node_pages(node
);
937 node
= next_node(node
, node_online_map
);
938 if (unlikely(node
>= MAX_NUMNODES
))
939 node
= first_node(node_online_map
);
940 __get_cpu_var(reap_node
) = node
;
944 #define init_reap_node(cpu) do { } while (0)
945 #define next_reap_node(void) do { } while (0)
949 * Initiate the reap timer running on the target CPU. We run at around 1 to 2Hz
950 * via the workqueue/eventd.
951 * Add the CPU number into the expiration time to minimize the possibility of
952 * the CPUs getting into lockstep and contending for the global cache chain
955 static void __devinit
start_cpu_timer(int cpu
)
957 struct delayed_work
*reap_work
= &per_cpu(reap_work
, cpu
);
960 * When this gets called from do_initcalls via cpucache_init(),
961 * init_workqueues() has already run, so keventd will be setup
964 if (keventd_up() && reap_work
->work
.func
== NULL
) {
966 INIT_DELAYED_WORK(reap_work
, cache_reap
);
967 schedule_delayed_work_on(cpu
, reap_work
,
968 __round_jiffies_relative(HZ
, cpu
));
972 static struct array_cache
*alloc_arraycache(int node
, int entries
,
975 int memsize
= sizeof(void *) * entries
+ sizeof(struct array_cache
);
976 struct array_cache
*nc
= NULL
;
978 nc
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
982 nc
->batchcount
= batchcount
;
984 spin_lock_init(&nc
->lock
);
990 * Transfer objects in one arraycache to another.
991 * Locking must be handled by the caller.
993 * Return the number of entries transferred.
995 static int transfer_objects(struct array_cache
*to
,
996 struct array_cache
*from
, unsigned int max
)
998 /* Figure out how many entries to transfer */
999 int nr
= min(min(from
->avail
, max
), to
->limit
- to
->avail
);
1004 memcpy(to
->entry
+ to
->avail
, from
->entry
+ from
->avail
-nr
,
1005 sizeof(void *) *nr
);
1015 #define drain_alien_cache(cachep, alien) do { } while (0)
1016 #define reap_alien(cachep, l3) do { } while (0)
1018 static inline struct array_cache
**alloc_alien_cache(int node
, int limit
)
1020 return (struct array_cache
**)BAD_ALIEN_MAGIC
;
1023 static inline void free_alien_cache(struct array_cache
**ac_ptr
)
1027 static inline int cache_free_alien(struct kmem_cache
*cachep
, void *objp
)
1032 static inline void *alternate_node_alloc(struct kmem_cache
*cachep
,
1038 static inline void *____cache_alloc_node(struct kmem_cache
*cachep
,
1039 gfp_t flags
, int nodeid
)
1044 #else /* CONFIG_NUMA */
1046 static void *____cache_alloc_node(struct kmem_cache
*, gfp_t
, int);
1047 static void *alternate_node_alloc(struct kmem_cache
*, gfp_t
);
1049 static struct array_cache
**alloc_alien_cache(int node
, int limit
)
1051 struct array_cache
**ac_ptr
;
1052 int memsize
= sizeof(void *) * nr_node_ids
;
1057 ac_ptr
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
1060 if (i
== node
|| !node_online(i
)) {
1064 ac_ptr
[i
] = alloc_arraycache(node
, limit
, 0xbaadf00d);
1066 for (i
--; i
<= 0; i
--)
1076 static void free_alien_cache(struct array_cache
**ac_ptr
)
1087 static void __drain_alien_cache(struct kmem_cache
*cachep
,
1088 struct array_cache
*ac
, int node
)
1090 struct kmem_list3
*rl3
= cachep
->nodelists
[node
];
1093 spin_lock(&rl3
->list_lock
);
1095 * Stuff objects into the remote nodes shared array first.
1096 * That way we could avoid the overhead of putting the objects
1097 * into the free lists and getting them back later.
1100 transfer_objects(rl3
->shared
, ac
, ac
->limit
);
1102 free_block(cachep
, ac
->entry
, ac
->avail
, node
);
1104 spin_unlock(&rl3
->list_lock
);
1109 * Called from cache_reap() to regularly drain alien caches round robin.
1111 static void reap_alien(struct kmem_cache
*cachep
, struct kmem_list3
*l3
)
1113 int node
= __get_cpu_var(reap_node
);
1116 struct array_cache
*ac
= l3
->alien
[node
];
1118 if (ac
&& ac
->avail
&& spin_trylock_irq(&ac
->lock
)) {
1119 __drain_alien_cache(cachep
, ac
, node
);
1120 spin_unlock_irq(&ac
->lock
);
1125 static void drain_alien_cache(struct kmem_cache
*cachep
,
1126 struct array_cache
**alien
)
1129 struct array_cache
*ac
;
1130 unsigned long flags
;
1132 for_each_online_node(i
) {
1135 spin_lock_irqsave(&ac
->lock
, flags
);
1136 __drain_alien_cache(cachep
, ac
, i
);
1137 spin_unlock_irqrestore(&ac
->lock
, flags
);
1142 static inline int cache_free_alien(struct kmem_cache
*cachep
, void *objp
)
1144 struct slab
*slabp
= virt_to_slab(objp
);
1145 int nodeid
= slabp
->nodeid
;
1146 struct kmem_list3
*l3
;
1147 struct array_cache
*alien
= NULL
;
1150 node
= numa_node_id();
1153 * Make sure we are not freeing a object from another node to the array
1154 * cache on this cpu.
1156 if (likely(slabp
->nodeid
== node
))
1159 l3
= cachep
->nodelists
[node
];
1160 STATS_INC_NODEFREES(cachep
);
1161 if (l3
->alien
&& l3
->alien
[nodeid
]) {
1162 alien
= l3
->alien
[nodeid
];
1163 spin_lock(&alien
->lock
);
1164 if (unlikely(alien
->avail
== alien
->limit
)) {
1165 STATS_INC_ACOVERFLOW(cachep
);
1166 __drain_alien_cache(cachep
, alien
, nodeid
);
1168 alien
->entry
[alien
->avail
++] = objp
;
1169 spin_unlock(&alien
->lock
);
1171 spin_lock(&(cachep
->nodelists
[nodeid
])->list_lock
);
1172 free_block(cachep
, &objp
, 1, nodeid
);
1173 spin_unlock(&(cachep
->nodelists
[nodeid
])->list_lock
);
1179 static int __cpuinit
cpuup_callback(struct notifier_block
*nfb
,
1180 unsigned long action
, void *hcpu
)
1182 long cpu
= (long)hcpu
;
1183 struct kmem_cache
*cachep
;
1184 struct kmem_list3
*l3
= NULL
;
1185 int node
= cpu_to_node(cpu
);
1186 int memsize
= sizeof(struct kmem_list3
);
1189 case CPU_UP_PREPARE
:
1190 mutex_lock(&cache_chain_mutex
);
1192 * We need to do this right in the beginning since
1193 * alloc_arraycache's are going to use this list.
1194 * kmalloc_node allows us to add the slab to the right
1195 * kmem_list3 and not this cpu's kmem_list3
1198 list_for_each_entry(cachep
, &cache_chain
, next
) {
1200 * Set up the size64 kmemlist for cpu before we can
1201 * begin anything. Make sure some other cpu on this
1202 * node has not already allocated this
1204 if (!cachep
->nodelists
[node
]) {
1205 l3
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
1208 kmem_list3_init(l3
);
1209 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
+
1210 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1213 * The l3s don't come and go as CPUs come and
1214 * go. cache_chain_mutex is sufficient
1217 cachep
->nodelists
[node
] = l3
;
1220 spin_lock_irq(&cachep
->nodelists
[node
]->list_lock
);
1221 cachep
->nodelists
[node
]->free_limit
=
1222 (1 + nr_cpus_node(node
)) *
1223 cachep
->batchcount
+ cachep
->num
;
1224 spin_unlock_irq(&cachep
->nodelists
[node
]->list_lock
);
1228 * Now we can go ahead with allocating the shared arrays and
1231 list_for_each_entry(cachep
, &cache_chain
, next
) {
1232 struct array_cache
*nc
;
1233 struct array_cache
*shared
= NULL
;
1234 struct array_cache
**alien
= NULL
;
1236 nc
= alloc_arraycache(node
, cachep
->limit
,
1237 cachep
->batchcount
);
1240 if (cachep
->shared
) {
1241 shared
= alloc_arraycache(node
,
1242 cachep
->shared
* cachep
->batchcount
,
1247 if (use_alien_caches
) {
1248 alien
= alloc_alien_cache(node
, cachep
->limit
);
1252 cachep
->array
[cpu
] = nc
;
1253 l3
= cachep
->nodelists
[node
];
1256 spin_lock_irq(&l3
->list_lock
);
1259 * We are serialised from CPU_DEAD or
1260 * CPU_UP_CANCELLED by the cpucontrol lock
1262 l3
->shared
= shared
;
1271 spin_unlock_irq(&l3
->list_lock
);
1273 free_alien_cache(alien
);
1277 mutex_unlock(&cache_chain_mutex
);
1278 start_cpu_timer(cpu
);
1280 #ifdef CONFIG_HOTPLUG_CPU
1281 case CPU_DOWN_PREPARE
:
1282 mutex_lock(&cache_chain_mutex
);
1284 case CPU_DOWN_FAILED
:
1285 mutex_unlock(&cache_chain_mutex
);
1289 * Even if all the cpus of a node are down, we don't free the
1290 * kmem_list3 of any cache. This to avoid a race between
1291 * cpu_down, and a kmalloc allocation from another cpu for
1292 * memory from the node of the cpu going down. The list3
1293 * structure is usually allocated from kmem_cache_create() and
1294 * gets destroyed at kmem_cache_destroy().
1298 case CPU_UP_CANCELED
:
1299 list_for_each_entry(cachep
, &cache_chain
, next
) {
1300 struct array_cache
*nc
;
1301 struct array_cache
*shared
;
1302 struct array_cache
**alien
;
1305 mask
= node_to_cpumask(node
);
1306 /* cpu is dead; no one can alloc from it. */
1307 nc
= cachep
->array
[cpu
];
1308 cachep
->array
[cpu
] = NULL
;
1309 l3
= cachep
->nodelists
[node
];
1312 goto free_array_cache
;
1314 spin_lock_irq(&l3
->list_lock
);
1316 /* Free limit for this kmem_list3 */
1317 l3
->free_limit
-= cachep
->batchcount
;
1319 free_block(cachep
, nc
->entry
, nc
->avail
, node
);
1321 if (!cpus_empty(mask
)) {
1322 spin_unlock_irq(&l3
->list_lock
);
1323 goto free_array_cache
;
1326 shared
= l3
->shared
;
1328 free_block(cachep
, shared
->entry
,
1329 shared
->avail
, node
);
1336 spin_unlock_irq(&l3
->list_lock
);
1340 drain_alien_cache(cachep
, alien
);
1341 free_alien_cache(alien
);
1347 * In the previous loop, all the objects were freed to
1348 * the respective cache's slabs, now we can go ahead and
1349 * shrink each nodelist to its limit.
1351 list_for_each_entry(cachep
, &cache_chain
, next
) {
1352 l3
= cachep
->nodelists
[node
];
1355 drain_freelist(cachep
, l3
, l3
->free_objects
);
1357 mutex_unlock(&cache_chain_mutex
);
1365 static struct notifier_block __cpuinitdata cpucache_notifier
= {
1366 &cpuup_callback
, NULL
, 0
1370 * swap the static kmem_list3 with kmalloced memory
1372 static void init_list(struct kmem_cache
*cachep
, struct kmem_list3
*list
,
1375 struct kmem_list3
*ptr
;
1377 ptr
= kmalloc_node(sizeof(struct kmem_list3
), GFP_KERNEL
, nodeid
);
1380 local_irq_disable();
1381 memcpy(ptr
, list
, sizeof(struct kmem_list3
));
1383 * Do not assume that spinlocks can be initialized via memcpy:
1385 spin_lock_init(&ptr
->list_lock
);
1387 MAKE_ALL_LISTS(cachep
, ptr
, nodeid
);
1388 cachep
->nodelists
[nodeid
] = ptr
;
1393 * Initialisation. Called after the page allocator have been initialised and
1394 * before smp_init().
1396 void __init
kmem_cache_init(void)
1399 struct cache_sizes
*sizes
;
1400 struct cache_names
*names
;
1405 if (num_possible_nodes() == 1)
1406 use_alien_caches
= 0;
1408 for (i
= 0; i
< NUM_INIT_LISTS
; i
++) {
1409 kmem_list3_init(&initkmem_list3
[i
]);
1410 if (i
< MAX_NUMNODES
)
1411 cache_cache
.nodelists
[i
] = NULL
;
1415 * Fragmentation resistance on low memory - only use bigger
1416 * page orders on machines with more than 32MB of memory.
1418 if (num_physpages
> (32 << 20) >> PAGE_SHIFT
)
1419 slab_break_gfp_order
= BREAK_GFP_ORDER_HI
;
1421 /* Bootstrap is tricky, because several objects are allocated
1422 * from caches that do not exist yet:
1423 * 1) initialize the cache_cache cache: it contains the struct
1424 * kmem_cache structures of all caches, except cache_cache itself:
1425 * cache_cache is statically allocated.
1426 * Initially an __init data area is used for the head array and the
1427 * kmem_list3 structures, it's replaced with a kmalloc allocated
1428 * array at the end of the bootstrap.
1429 * 2) Create the first kmalloc cache.
1430 * The struct kmem_cache for the new cache is allocated normally.
1431 * An __init data area is used for the head array.
1432 * 3) Create the remaining kmalloc caches, with minimally sized
1434 * 4) Replace the __init data head arrays for cache_cache and the first
1435 * kmalloc cache with kmalloc allocated arrays.
1436 * 5) Replace the __init data for kmem_list3 for cache_cache and
1437 * the other cache's with kmalloc allocated memory.
1438 * 6) Resize the head arrays of the kmalloc caches to their final sizes.
1441 node
= numa_node_id();
1443 /* 1) create the cache_cache */
1444 INIT_LIST_HEAD(&cache_chain
);
1445 list_add(&cache_cache
.next
, &cache_chain
);
1446 cache_cache
.colour_off
= cache_line_size();
1447 cache_cache
.array
[smp_processor_id()] = &initarray_cache
.cache
;
1448 cache_cache
.nodelists
[node
] = &initkmem_list3
[CACHE_CACHE
];
1451 * struct kmem_cache size depends on nr_node_ids, which
1452 * can be less than MAX_NUMNODES.
1454 cache_cache
.buffer_size
= offsetof(struct kmem_cache
, nodelists
) +
1455 nr_node_ids
* sizeof(struct kmem_list3
*);
1457 cache_cache
.obj_size
= cache_cache
.buffer_size
;
1459 cache_cache
.buffer_size
= ALIGN(cache_cache
.buffer_size
,
1461 cache_cache
.reciprocal_buffer_size
=
1462 reciprocal_value(cache_cache
.buffer_size
);
1464 for (order
= 0; order
< MAX_ORDER
; order
++) {
1465 cache_estimate(order
, cache_cache
.buffer_size
,
1466 cache_line_size(), 0, &left_over
, &cache_cache
.num
);
1467 if (cache_cache
.num
)
1470 BUG_ON(!cache_cache
.num
);
1471 cache_cache
.gfporder
= order
;
1472 cache_cache
.colour
= left_over
/ cache_cache
.colour_off
;
1473 cache_cache
.slab_size
= ALIGN(cache_cache
.num
* sizeof(kmem_bufctl_t
) +
1474 sizeof(struct slab
), cache_line_size());
1476 /* 2+3) create the kmalloc caches */
1477 sizes
= malloc_sizes
;
1478 names
= cache_names
;
1481 * Initialize the caches that provide memory for the array cache and the
1482 * kmem_list3 structures first. Without this, further allocations will
1486 sizes
[INDEX_AC
].cs_cachep
= kmem_cache_create(names
[INDEX_AC
].name
,
1487 sizes
[INDEX_AC
].cs_size
,
1488 ARCH_KMALLOC_MINALIGN
,
1489 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1492 if (INDEX_AC
!= INDEX_L3
) {
1493 sizes
[INDEX_L3
].cs_cachep
=
1494 kmem_cache_create(names
[INDEX_L3
].name
,
1495 sizes
[INDEX_L3
].cs_size
,
1496 ARCH_KMALLOC_MINALIGN
,
1497 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1501 slab_early_init
= 0;
1503 while (sizes
->cs_size
!= ULONG_MAX
) {
1505 * For performance, all the general caches are L1 aligned.
1506 * This should be particularly beneficial on SMP boxes, as it
1507 * eliminates "false sharing".
1508 * Note for systems short on memory removing the alignment will
1509 * allow tighter packing of the smaller caches.
1511 if (!sizes
->cs_cachep
) {
1512 sizes
->cs_cachep
= kmem_cache_create(names
->name
,
1514 ARCH_KMALLOC_MINALIGN
,
1515 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1518 #ifdef CONFIG_ZONE_DMA
1519 sizes
->cs_dmacachep
= kmem_cache_create(
1522 ARCH_KMALLOC_MINALIGN
,
1523 ARCH_KMALLOC_FLAGS
|SLAB_CACHE_DMA
|
1530 /* 4) Replace the bootstrap head arrays */
1532 struct array_cache
*ptr
;
1534 ptr
= kmalloc(sizeof(struct arraycache_init
), GFP_KERNEL
);
1536 local_irq_disable();
1537 BUG_ON(cpu_cache_get(&cache_cache
) != &initarray_cache
.cache
);
1538 memcpy(ptr
, cpu_cache_get(&cache_cache
),
1539 sizeof(struct arraycache_init
));
1541 * Do not assume that spinlocks can be initialized via memcpy:
1543 spin_lock_init(&ptr
->lock
);
1545 cache_cache
.array
[smp_processor_id()] = ptr
;
1548 ptr
= kmalloc(sizeof(struct arraycache_init
), GFP_KERNEL
);
1550 local_irq_disable();
1551 BUG_ON(cpu_cache_get(malloc_sizes
[INDEX_AC
].cs_cachep
)
1552 != &initarray_generic
.cache
);
1553 memcpy(ptr
, cpu_cache_get(malloc_sizes
[INDEX_AC
].cs_cachep
),
1554 sizeof(struct arraycache_init
));
1556 * Do not assume that spinlocks can be initialized via memcpy:
1558 spin_lock_init(&ptr
->lock
);
1560 malloc_sizes
[INDEX_AC
].cs_cachep
->array
[smp_processor_id()] =
1564 /* 5) Replace the bootstrap kmem_list3's */
1568 /* Replace the static kmem_list3 structures for the boot cpu */
1569 init_list(&cache_cache
, &initkmem_list3
[CACHE_CACHE
], node
);
1571 for_each_online_node(nid
) {
1572 init_list(malloc_sizes
[INDEX_AC
].cs_cachep
,
1573 &initkmem_list3
[SIZE_AC
+ nid
], nid
);
1575 if (INDEX_AC
!= INDEX_L3
) {
1576 init_list(malloc_sizes
[INDEX_L3
].cs_cachep
,
1577 &initkmem_list3
[SIZE_L3
+ nid
], nid
);
1582 /* 6) resize the head arrays to their final sizes */
1584 struct kmem_cache
*cachep
;
1585 mutex_lock(&cache_chain_mutex
);
1586 list_for_each_entry(cachep
, &cache_chain
, next
)
1587 if (enable_cpucache(cachep
))
1589 mutex_unlock(&cache_chain_mutex
);
1592 /* Annotate slab for lockdep -- annotate the malloc caches */
1597 g_cpucache_up
= FULL
;
1600 * Register a cpu startup notifier callback that initializes
1601 * cpu_cache_get for all new cpus
1603 register_cpu_notifier(&cpucache_notifier
);
1606 * The reap timers are started later, with a module init call: That part
1607 * of the kernel is not yet operational.
1611 static int __init
cpucache_init(void)
1616 * Register the timers that return unneeded pages to the page allocator
1618 for_each_online_cpu(cpu
)
1619 start_cpu_timer(cpu
);
1622 __initcall(cpucache_init
);
1625 * Interface to system's page allocator. No need to hold the cache-lock.
1627 * If we requested dmaable memory, we will get it. Even if we
1628 * did not request dmaable memory, we might get it, but that
1629 * would be relatively rare and ignorable.
1631 static void *kmem_getpages(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
1639 * Nommu uses slab's for process anonymous memory allocations, and thus
1640 * requires __GFP_COMP to properly refcount higher order allocations
1642 flags
|= __GFP_COMP
;
1645 flags
|= cachep
->gfpflags
;
1647 page
= alloc_pages_node(nodeid
, flags
, cachep
->gfporder
);
1651 nr_pages
= (1 << cachep
->gfporder
);
1652 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1653 add_zone_page_state(page_zone(page
),
1654 NR_SLAB_RECLAIMABLE
, nr_pages
);
1656 add_zone_page_state(page_zone(page
),
1657 NR_SLAB_UNRECLAIMABLE
, nr_pages
);
1658 for (i
= 0; i
< nr_pages
; i
++)
1659 __SetPageSlab(page
+ i
);
1660 return page_address(page
);
1664 * Interface to system's page release.
1666 static void kmem_freepages(struct kmem_cache
*cachep
, void *addr
)
1668 unsigned long i
= (1 << cachep
->gfporder
);
1669 struct page
*page
= virt_to_page(addr
);
1670 const unsigned long nr_freed
= i
;
1672 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1673 sub_zone_page_state(page_zone(page
),
1674 NR_SLAB_RECLAIMABLE
, nr_freed
);
1676 sub_zone_page_state(page_zone(page
),
1677 NR_SLAB_UNRECLAIMABLE
, nr_freed
);
1679 BUG_ON(!PageSlab(page
));
1680 __ClearPageSlab(page
);
1683 if (current
->reclaim_state
)
1684 current
->reclaim_state
->reclaimed_slab
+= nr_freed
;
1685 free_pages((unsigned long)addr
, cachep
->gfporder
);
1688 static void kmem_rcu_free(struct rcu_head
*head
)
1690 struct slab_rcu
*slab_rcu
= (struct slab_rcu
*)head
;
1691 struct kmem_cache
*cachep
= slab_rcu
->cachep
;
1693 kmem_freepages(cachep
, slab_rcu
->addr
);
1694 if (OFF_SLAB(cachep
))
1695 kmem_cache_free(cachep
->slabp_cache
, slab_rcu
);
1700 #ifdef CONFIG_DEBUG_PAGEALLOC
1701 static void store_stackinfo(struct kmem_cache
*cachep
, unsigned long *addr
,
1702 unsigned long caller
)
1704 int size
= obj_size(cachep
);
1706 addr
= (unsigned long *)&((char *)addr
)[obj_offset(cachep
)];
1708 if (size
< 5 * sizeof(unsigned long))
1711 *addr
++ = 0x12345678;
1713 *addr
++ = smp_processor_id();
1714 size
-= 3 * sizeof(unsigned long);
1716 unsigned long *sptr
= &caller
;
1717 unsigned long svalue
;
1719 while (!kstack_end(sptr
)) {
1721 if (kernel_text_address(svalue
)) {
1723 size
-= sizeof(unsigned long);
1724 if (size
<= sizeof(unsigned long))
1730 *addr
++ = 0x87654321;
1734 static void poison_obj(struct kmem_cache
*cachep
, void *addr
, unsigned char val
)
1736 int size
= obj_size(cachep
);
1737 addr
= &((char *)addr
)[obj_offset(cachep
)];
1739 memset(addr
, val
, size
);
1740 *(unsigned char *)(addr
+ size
- 1) = POISON_END
;
1743 static void dump_line(char *data
, int offset
, int limit
)
1746 unsigned char error
= 0;
1749 printk(KERN_ERR
"%03x:", offset
);
1750 for (i
= 0; i
< limit
; i
++) {
1751 if (data
[offset
+ i
] != POISON_FREE
) {
1752 error
= data
[offset
+ i
];
1755 printk(" %02x", (unsigned char)data
[offset
+ i
]);
1759 if (bad_count
== 1) {
1760 error
^= POISON_FREE
;
1761 if (!(error
& (error
- 1))) {
1762 printk(KERN_ERR
"Single bit error detected. Probably "
1765 printk(KERN_ERR
"Run memtest86+ or a similar memory "
1768 printk(KERN_ERR
"Run a memory test tool.\n");
1777 static void print_objinfo(struct kmem_cache
*cachep
, void *objp
, int lines
)
1782 if (cachep
->flags
& SLAB_RED_ZONE
) {
1783 printk(KERN_ERR
"Redzone: 0x%lx/0x%lx.\n",
1784 *dbg_redzone1(cachep
, objp
),
1785 *dbg_redzone2(cachep
, objp
));
1788 if (cachep
->flags
& SLAB_STORE_USER
) {
1789 printk(KERN_ERR
"Last user: [<%p>]",
1790 *dbg_userword(cachep
, objp
));
1791 print_symbol("(%s)",
1792 (unsigned long)*dbg_userword(cachep
, objp
));
1795 realobj
= (char *)objp
+ obj_offset(cachep
);
1796 size
= obj_size(cachep
);
1797 for (i
= 0; i
< size
&& lines
; i
+= 16, lines
--) {
1800 if (i
+ limit
> size
)
1802 dump_line(realobj
, i
, limit
);
1806 static void check_poison_obj(struct kmem_cache
*cachep
, void *objp
)
1812 realobj
= (char *)objp
+ obj_offset(cachep
);
1813 size
= obj_size(cachep
);
1815 for (i
= 0; i
< size
; i
++) {
1816 char exp
= POISON_FREE
;
1819 if (realobj
[i
] != exp
) {
1825 "Slab corruption: %s start=%p, len=%d\n",
1826 cachep
->name
, realobj
, size
);
1827 print_objinfo(cachep
, objp
, 0);
1829 /* Hexdump the affected line */
1832 if (i
+ limit
> size
)
1834 dump_line(realobj
, i
, limit
);
1837 /* Limit to 5 lines */
1843 /* Print some data about the neighboring objects, if they
1846 struct slab
*slabp
= virt_to_slab(objp
);
1849 objnr
= obj_to_index(cachep
, slabp
, objp
);
1851 objp
= index_to_obj(cachep
, slabp
, objnr
- 1);
1852 realobj
= (char *)objp
+ obj_offset(cachep
);
1853 printk(KERN_ERR
"Prev obj: start=%p, len=%d\n",
1855 print_objinfo(cachep
, objp
, 2);
1857 if (objnr
+ 1 < cachep
->num
) {
1858 objp
= index_to_obj(cachep
, slabp
, objnr
+ 1);
1859 realobj
= (char *)objp
+ obj_offset(cachep
);
1860 printk(KERN_ERR
"Next obj: start=%p, len=%d\n",
1862 print_objinfo(cachep
, objp
, 2);
1870 * slab_destroy_objs - destroy a slab and its objects
1871 * @cachep: cache pointer being destroyed
1872 * @slabp: slab pointer being destroyed
1874 * Call the registered destructor for each object in a slab that is being
1877 static void slab_destroy_objs(struct kmem_cache
*cachep
, struct slab
*slabp
)
1880 for (i
= 0; i
< cachep
->num
; i
++) {
1881 void *objp
= index_to_obj(cachep
, slabp
, i
);
1883 if (cachep
->flags
& SLAB_POISON
) {
1884 #ifdef CONFIG_DEBUG_PAGEALLOC
1885 if (cachep
->buffer_size
% PAGE_SIZE
== 0 &&
1887 kernel_map_pages(virt_to_page(objp
),
1888 cachep
->buffer_size
/ PAGE_SIZE
, 1);
1890 check_poison_obj(cachep
, objp
);
1892 check_poison_obj(cachep
, objp
);
1895 if (cachep
->flags
& SLAB_RED_ZONE
) {
1896 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
)
1897 slab_error(cachep
, "start of a freed object "
1899 if (*dbg_redzone2(cachep
, objp
) != RED_INACTIVE
)
1900 slab_error(cachep
, "end of a freed object "
1903 if (cachep
->dtor
&& !(cachep
->flags
& SLAB_POISON
))
1904 (cachep
->dtor
) (objp
+ obj_offset(cachep
), cachep
, 0);
1908 static void slab_destroy_objs(struct kmem_cache
*cachep
, struct slab
*slabp
)
1912 for (i
= 0; i
< cachep
->num
; i
++) {
1913 void *objp
= index_to_obj(cachep
, slabp
, i
);
1914 (cachep
->dtor
) (objp
, cachep
, 0);
1921 * slab_destroy - destroy and release all objects in a slab
1922 * @cachep: cache pointer being destroyed
1923 * @slabp: slab pointer being destroyed
1925 * Destroy all the objs in a slab, and release the mem back to the system.
1926 * Before calling the slab must have been unlinked from the cache. The
1927 * cache-lock is not held/needed.
1929 static void slab_destroy(struct kmem_cache
*cachep
, struct slab
*slabp
)
1931 void *addr
= slabp
->s_mem
- slabp
->colouroff
;
1933 slab_destroy_objs(cachep
, slabp
);
1934 if (unlikely(cachep
->flags
& SLAB_DESTROY_BY_RCU
)) {
1935 struct slab_rcu
*slab_rcu
;
1937 slab_rcu
= (struct slab_rcu
*)slabp
;
1938 slab_rcu
->cachep
= cachep
;
1939 slab_rcu
->addr
= addr
;
1940 call_rcu(&slab_rcu
->head
, kmem_rcu_free
);
1942 kmem_freepages(cachep
, addr
);
1943 if (OFF_SLAB(cachep
))
1944 kmem_cache_free(cachep
->slabp_cache
, slabp
);
1949 * For setting up all the kmem_list3s for cache whose buffer_size is same as
1950 * size of kmem_list3.
1952 static void __init
set_up_list3s(struct kmem_cache
*cachep
, int index
)
1956 for_each_online_node(node
) {
1957 cachep
->nodelists
[node
] = &initkmem_list3
[index
+ node
];
1958 cachep
->nodelists
[node
]->next_reap
= jiffies
+
1960 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1964 static void __kmem_cache_destroy(struct kmem_cache
*cachep
)
1967 struct kmem_list3
*l3
;
1969 for_each_online_cpu(i
)
1970 kfree(cachep
->array
[i
]);
1972 /* NUMA: free the list3 structures */
1973 for_each_online_node(i
) {
1974 l3
= cachep
->nodelists
[i
];
1977 free_alien_cache(l3
->alien
);
1981 kmem_cache_free(&cache_cache
, cachep
);
1986 * calculate_slab_order - calculate size (page order) of slabs
1987 * @cachep: pointer to the cache that is being created
1988 * @size: size of objects to be created in this cache.
1989 * @align: required alignment for the objects.
1990 * @flags: slab allocation flags
1992 * Also calculates the number of objects per slab.
1994 * This could be made much more intelligent. For now, try to avoid using
1995 * high order pages for slabs. When the gfp() functions are more friendly
1996 * towards high-order requests, this should be changed.
1998 static size_t calculate_slab_order(struct kmem_cache
*cachep
,
1999 size_t size
, size_t align
, unsigned long flags
)
2001 unsigned long offslab_limit
;
2002 size_t left_over
= 0;
2005 for (gfporder
= 0; gfporder
<= MAX_GFP_ORDER
; gfporder
++) {
2009 cache_estimate(gfporder
, size
, align
, flags
, &remainder
, &num
);
2013 if (flags
& CFLGS_OFF_SLAB
) {
2015 * Max number of objs-per-slab for caches which
2016 * use off-slab slabs. Needed to avoid a possible
2017 * looping condition in cache_grow().
2019 offslab_limit
= size
- sizeof(struct slab
);
2020 offslab_limit
/= sizeof(kmem_bufctl_t
);
2022 if (num
> offslab_limit
)
2026 /* Found something acceptable - save it away */
2028 cachep
->gfporder
= gfporder
;
2029 left_over
= remainder
;
2032 * A VFS-reclaimable slab tends to have most allocations
2033 * as GFP_NOFS and we really don't want to have to be allocating
2034 * higher-order pages when we are unable to shrink dcache.
2036 if (flags
& SLAB_RECLAIM_ACCOUNT
)
2040 * Large number of objects is good, but very large slabs are
2041 * currently bad for the gfp()s.
2043 if (gfporder
>= slab_break_gfp_order
)
2047 * Acceptable internal fragmentation?
2049 if (left_over
* 8 <= (PAGE_SIZE
<< gfporder
))
2055 static int setup_cpu_cache(struct kmem_cache
*cachep
)
2057 if (g_cpucache_up
== FULL
)
2058 return enable_cpucache(cachep
);
2060 if (g_cpucache_up
== NONE
) {
2062 * Note: the first kmem_cache_create must create the cache
2063 * that's used by kmalloc(24), otherwise the creation of
2064 * further caches will BUG().
2066 cachep
->array
[smp_processor_id()] = &initarray_generic
.cache
;
2069 * If the cache that's used by kmalloc(sizeof(kmem_list3)) is
2070 * the first cache, then we need to set up all its list3s,
2071 * otherwise the creation of further caches will BUG().
2073 set_up_list3s(cachep
, SIZE_AC
);
2074 if (INDEX_AC
== INDEX_L3
)
2075 g_cpucache_up
= PARTIAL_L3
;
2077 g_cpucache_up
= PARTIAL_AC
;
2079 cachep
->array
[smp_processor_id()] =
2080 kmalloc(sizeof(struct arraycache_init
), GFP_KERNEL
);
2082 if (g_cpucache_up
== PARTIAL_AC
) {
2083 set_up_list3s(cachep
, SIZE_L3
);
2084 g_cpucache_up
= PARTIAL_L3
;
2087 for_each_online_node(node
) {
2088 cachep
->nodelists
[node
] =
2089 kmalloc_node(sizeof(struct kmem_list3
),
2091 BUG_ON(!cachep
->nodelists
[node
]);
2092 kmem_list3_init(cachep
->nodelists
[node
]);
2096 cachep
->nodelists
[numa_node_id()]->next_reap
=
2097 jiffies
+ REAPTIMEOUT_LIST3
+
2098 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
2100 cpu_cache_get(cachep
)->avail
= 0;
2101 cpu_cache_get(cachep
)->limit
= BOOT_CPUCACHE_ENTRIES
;
2102 cpu_cache_get(cachep
)->batchcount
= 1;
2103 cpu_cache_get(cachep
)->touched
= 0;
2104 cachep
->batchcount
= 1;
2105 cachep
->limit
= BOOT_CPUCACHE_ENTRIES
;
2110 * kmem_cache_create - Create a cache.
2111 * @name: A string which is used in /proc/slabinfo to identify this cache.
2112 * @size: The size of objects to be created in this cache.
2113 * @align: The required alignment for the objects.
2114 * @flags: SLAB flags
2115 * @ctor: A constructor for the objects.
2116 * @dtor: A destructor for the objects.
2118 * Returns a ptr to the cache on success, NULL on failure.
2119 * Cannot be called within a int, but can be interrupted.
2120 * The @ctor is run when new pages are allocated by the cache
2121 * and the @dtor is run before the pages are handed back.
2123 * @name must be valid until the cache is destroyed. This implies that
2124 * the module calling this has to destroy the cache before getting unloaded.
2128 * %SLAB_POISON - Poison the slab with a known test pattern (a5a5a5a5)
2129 * to catch references to uninitialised memory.
2131 * %SLAB_RED_ZONE - Insert `Red' zones around the allocated memory to check
2132 * for buffer overruns.
2134 * %SLAB_HWCACHE_ALIGN - Align the objects in this cache to a hardware
2135 * cacheline. This can be beneficial if you're counting cycles as closely
2139 kmem_cache_create (const char *name
, size_t size
, size_t align
,
2140 unsigned long flags
,
2141 void (*ctor
)(void*, struct kmem_cache
*, unsigned long),
2142 void (*dtor
)(void*, struct kmem_cache
*, unsigned long))
2144 size_t left_over
, slab_size
, ralign
;
2145 struct kmem_cache
*cachep
= NULL
, *pc
;
2148 * Sanity checks... these are all serious usage bugs.
2150 if (!name
|| in_interrupt() || (size
< BYTES_PER_WORD
) ||
2151 (size
> (1 << MAX_OBJ_ORDER
) * PAGE_SIZE
) || (dtor
&& !ctor
)) {
2152 printk(KERN_ERR
"%s: Early error in slab %s\n", __FUNCTION__
,
2158 * We use cache_chain_mutex to ensure a consistent view of
2159 * cpu_online_map as well. Please see cpuup_callback
2161 mutex_lock(&cache_chain_mutex
);
2163 list_for_each_entry(pc
, &cache_chain
, next
) {
2168 * This happens when the module gets unloaded and doesn't
2169 * destroy its slab cache and no-one else reuses the vmalloc
2170 * area of the module. Print a warning.
2172 res
= probe_kernel_address(pc
->name
, tmp
);
2174 printk("SLAB: cache with size %d has lost its name\n",
2179 if (!strcmp(pc
->name
, name
)) {
2180 printk("kmem_cache_create: duplicate cache %s\n", name
);
2187 WARN_ON(strchr(name
, ' ')); /* It confuses parsers */
2188 if ((flags
& SLAB_DEBUG_INITIAL
) && !ctor
) {
2189 /* No constructor, but inital state check requested */
2190 printk(KERN_ERR
"%s: No con, but init state check "
2191 "requested - %s\n", __FUNCTION__
, name
);
2192 flags
&= ~SLAB_DEBUG_INITIAL
;
2196 * Enable redzoning and last user accounting, except for caches with
2197 * large objects, if the increased size would increase the object size
2198 * above the next power of two: caches with object sizes just above a
2199 * power of two have a significant amount of internal fragmentation.
2201 if (size
< 4096 || fls(size
- 1) == fls(size
-1 + 3 * BYTES_PER_WORD
))
2202 flags
|= SLAB_RED_ZONE
| SLAB_STORE_USER
;
2203 if (!(flags
& SLAB_DESTROY_BY_RCU
))
2204 flags
|= SLAB_POISON
;
2206 if (flags
& SLAB_DESTROY_BY_RCU
)
2207 BUG_ON(flags
& SLAB_POISON
);
2209 if (flags
& SLAB_DESTROY_BY_RCU
)
2213 * Always checks flags, a caller might be expecting debug support which
2216 BUG_ON(flags
& ~CREATE_MASK
);
2219 * Check that size is in terms of words. This is needed to avoid
2220 * unaligned accesses for some archs when redzoning is used, and makes
2221 * sure any on-slab bufctl's are also correctly aligned.
2223 if (size
& (BYTES_PER_WORD
- 1)) {
2224 size
+= (BYTES_PER_WORD
- 1);
2225 size
&= ~(BYTES_PER_WORD
- 1);
2228 /* calculate the final buffer alignment: */
2230 /* 1) arch recommendation: can be overridden for debug */
2231 if (flags
& SLAB_HWCACHE_ALIGN
) {
2233 * Default alignment: as specified by the arch code. Except if
2234 * an object is really small, then squeeze multiple objects into
2237 ralign
= cache_line_size();
2238 while (size
<= ralign
/ 2)
2241 ralign
= BYTES_PER_WORD
;
2245 * Redzoning and user store require word alignment. Note this will be
2246 * overridden by architecture or caller mandated alignment if either
2247 * is greater than BYTES_PER_WORD.
2249 if (flags
& SLAB_RED_ZONE
|| flags
& SLAB_STORE_USER
)
2250 ralign
= BYTES_PER_WORD
;
2252 /* 2) arch mandated alignment */
2253 if (ralign
< ARCH_SLAB_MINALIGN
) {
2254 ralign
= ARCH_SLAB_MINALIGN
;
2256 /* 3) caller mandated alignment */
2257 if (ralign
< align
) {
2260 /* disable debug if necessary */
2261 if (ralign
> BYTES_PER_WORD
)
2262 flags
&= ~(SLAB_RED_ZONE
| SLAB_STORE_USER
);
2268 /* Get cache's description obj. */
2269 cachep
= kmem_cache_zalloc(&cache_cache
, GFP_KERNEL
);
2274 cachep
->obj_size
= size
;
2277 * Both debugging options require word-alignment which is calculated
2280 if (flags
& SLAB_RED_ZONE
) {
2281 /* add space for red zone words */
2282 cachep
->obj_offset
+= BYTES_PER_WORD
;
2283 size
+= 2 * BYTES_PER_WORD
;
2285 if (flags
& SLAB_STORE_USER
) {
2286 /* user store requires one word storage behind the end of
2289 size
+= BYTES_PER_WORD
;
2291 #if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
2292 if (size
>= malloc_sizes
[INDEX_L3
+ 1].cs_size
2293 && cachep
->obj_size
> cache_line_size() && size
< PAGE_SIZE
) {
2294 cachep
->obj_offset
+= PAGE_SIZE
- size
;
2301 * Determine if the slab management is 'on' or 'off' slab.
2302 * (bootstrapping cannot cope with offslab caches so don't do
2305 if ((size
>= (PAGE_SIZE
>> 3)) && !slab_early_init
)
2307 * Size is large, assume best to place the slab management obj
2308 * off-slab (should allow better packing of objs).
2310 flags
|= CFLGS_OFF_SLAB
;
2312 size
= ALIGN(size
, align
);
2314 left_over
= calculate_slab_order(cachep
, size
, align
, flags
);
2317 printk("kmem_cache_create: couldn't create cache %s.\n", name
);
2318 kmem_cache_free(&cache_cache
, cachep
);
2322 slab_size
= ALIGN(cachep
->num
* sizeof(kmem_bufctl_t
)
2323 + sizeof(struct slab
), align
);
2326 * If the slab has been placed off-slab, and we have enough space then
2327 * move it on-slab. This is at the expense of any extra colouring.
2329 if (flags
& CFLGS_OFF_SLAB
&& left_over
>= slab_size
) {
2330 flags
&= ~CFLGS_OFF_SLAB
;
2331 left_over
-= slab_size
;
2334 if (flags
& CFLGS_OFF_SLAB
) {
2335 /* really off slab. No need for manual alignment */
2337 cachep
->num
* sizeof(kmem_bufctl_t
) + sizeof(struct slab
);
2340 cachep
->colour_off
= cache_line_size();
2341 /* Offset must be a multiple of the alignment. */
2342 if (cachep
->colour_off
< align
)
2343 cachep
->colour_off
= align
;
2344 cachep
->colour
= left_over
/ cachep
->colour_off
;
2345 cachep
->slab_size
= slab_size
;
2346 cachep
->flags
= flags
;
2347 cachep
->gfpflags
= 0;
2348 if (CONFIG_ZONE_DMA_FLAG
&& (flags
& SLAB_CACHE_DMA
))
2349 cachep
->gfpflags
|= GFP_DMA
;
2350 cachep
->buffer_size
= size
;
2351 cachep
->reciprocal_buffer_size
= reciprocal_value(size
);
2353 if (flags
& CFLGS_OFF_SLAB
) {
2354 cachep
->slabp_cache
= kmem_find_general_cachep(slab_size
, 0u);
2356 * This is a possibility for one of the malloc_sizes caches.
2357 * But since we go off slab only for object size greater than
2358 * PAGE_SIZE/8, and malloc_sizes gets created in ascending order,
2359 * this should not happen at all.
2360 * But leave a BUG_ON for some lucky dude.
2362 BUG_ON(!cachep
->slabp_cache
);
2364 cachep
->ctor
= ctor
;
2365 cachep
->dtor
= dtor
;
2366 cachep
->name
= name
;
2368 if (setup_cpu_cache(cachep
)) {
2369 __kmem_cache_destroy(cachep
);
2374 /* cache setup completed, link it into the list */
2375 list_add(&cachep
->next
, &cache_chain
);
2377 if (!cachep
&& (flags
& SLAB_PANIC
))
2378 panic("kmem_cache_create(): failed to create slab `%s'\n",
2380 mutex_unlock(&cache_chain_mutex
);
2383 EXPORT_SYMBOL(kmem_cache_create
);
2386 static void check_irq_off(void)
2388 BUG_ON(!irqs_disabled());
2391 static void check_irq_on(void)
2393 BUG_ON(irqs_disabled());
2396 static void check_spinlock_acquired(struct kmem_cache
*cachep
)
2400 assert_spin_locked(&cachep
->nodelists
[numa_node_id()]->list_lock
);
2404 static void check_spinlock_acquired_node(struct kmem_cache
*cachep
, int node
)
2408 assert_spin_locked(&cachep
->nodelists
[node
]->list_lock
);
2413 #define check_irq_off() do { } while(0)
2414 #define check_irq_on() do { } while(0)
2415 #define check_spinlock_acquired(x) do { } while(0)
2416 #define check_spinlock_acquired_node(x, y) do { } while(0)
2419 static void drain_array(struct kmem_cache
*cachep
, struct kmem_list3
*l3
,
2420 struct array_cache
*ac
,
2421 int force
, int node
);
2423 static void do_drain(void *arg
)
2425 struct kmem_cache
*cachep
= arg
;
2426 struct array_cache
*ac
;
2427 int node
= numa_node_id();
2430 ac
= cpu_cache_get(cachep
);
2431 spin_lock(&cachep
->nodelists
[node
]->list_lock
);
2432 free_block(cachep
, ac
->entry
, ac
->avail
, node
);
2433 spin_unlock(&cachep
->nodelists
[node
]->list_lock
);
2437 static void drain_cpu_caches(struct kmem_cache
*cachep
)
2439 struct kmem_list3
*l3
;
2442 on_each_cpu(do_drain
, cachep
, 1, 1);
2444 for_each_online_node(node
) {
2445 l3
= cachep
->nodelists
[node
];
2446 if (l3
&& l3
->alien
)
2447 drain_alien_cache(cachep
, l3
->alien
);
2450 for_each_online_node(node
) {
2451 l3
= cachep
->nodelists
[node
];
2453 drain_array(cachep
, l3
, l3
->shared
, 1, node
);
2458 * Remove slabs from the list of free slabs.
2459 * Specify the number of slabs to drain in tofree.
2461 * Returns the actual number of slabs released.
2463 static int drain_freelist(struct kmem_cache
*cache
,
2464 struct kmem_list3
*l3
, int tofree
)
2466 struct list_head
*p
;
2471 while (nr_freed
< tofree
&& !list_empty(&l3
->slabs_free
)) {
2473 spin_lock_irq(&l3
->list_lock
);
2474 p
= l3
->slabs_free
.prev
;
2475 if (p
== &l3
->slabs_free
) {
2476 spin_unlock_irq(&l3
->list_lock
);
2480 slabp
= list_entry(p
, struct slab
, list
);
2482 BUG_ON(slabp
->inuse
);
2484 list_del(&slabp
->list
);
2486 * Safe to drop the lock. The slab is no longer linked
2489 l3
->free_objects
-= cache
->num
;
2490 spin_unlock_irq(&l3
->list_lock
);
2491 slab_destroy(cache
, slabp
);
2498 /* Called with cache_chain_mutex held to protect against cpu hotplug */
2499 static int __cache_shrink(struct kmem_cache
*cachep
)
2502 struct kmem_list3
*l3
;
2504 drain_cpu_caches(cachep
);
2507 for_each_online_node(i
) {
2508 l3
= cachep
->nodelists
[i
];
2512 drain_freelist(cachep
, l3
, l3
->free_objects
);
2514 ret
+= !list_empty(&l3
->slabs_full
) ||
2515 !list_empty(&l3
->slabs_partial
);
2517 return (ret
? 1 : 0);
2521 * kmem_cache_shrink - Shrink a cache.
2522 * @cachep: The cache to shrink.
2524 * Releases as many slabs as possible for a cache.
2525 * To help debugging, a zero exit status indicates all slabs were released.
2527 int kmem_cache_shrink(struct kmem_cache
*cachep
)
2530 BUG_ON(!cachep
|| in_interrupt());
2532 mutex_lock(&cache_chain_mutex
);
2533 ret
= __cache_shrink(cachep
);
2534 mutex_unlock(&cache_chain_mutex
);
2537 EXPORT_SYMBOL(kmem_cache_shrink
);
2540 * kmem_cache_destroy - delete a cache
2541 * @cachep: the cache to destroy
2543 * Remove a &struct kmem_cache object from the slab cache.
2545 * It is expected this function will be called by a module when it is
2546 * unloaded. This will remove the cache completely, and avoid a duplicate
2547 * cache being allocated each time a module is loaded and unloaded, if the
2548 * module doesn't have persistent in-kernel storage across loads and unloads.
2550 * The cache must be empty before calling this function.
2552 * The caller must guarantee that noone will allocate memory from the cache
2553 * during the kmem_cache_destroy().
2555 void kmem_cache_destroy(struct kmem_cache
*cachep
)
2557 BUG_ON(!cachep
|| in_interrupt());
2559 /* Find the cache in the chain of caches. */
2560 mutex_lock(&cache_chain_mutex
);
2562 * the chain is never empty, cache_cache is never destroyed
2564 list_del(&cachep
->next
);
2565 if (__cache_shrink(cachep
)) {
2566 slab_error(cachep
, "Can't free all objects");
2567 list_add(&cachep
->next
, &cache_chain
);
2568 mutex_unlock(&cache_chain_mutex
);
2572 if (unlikely(cachep
->flags
& SLAB_DESTROY_BY_RCU
))
2575 __kmem_cache_destroy(cachep
);
2576 mutex_unlock(&cache_chain_mutex
);
2578 EXPORT_SYMBOL(kmem_cache_destroy
);
2581 * Get the memory for a slab management obj.
2582 * For a slab cache when the slab descriptor is off-slab, slab descriptors
2583 * always come from malloc_sizes caches. The slab descriptor cannot
2584 * come from the same cache which is getting created because,
2585 * when we are searching for an appropriate cache for these
2586 * descriptors in kmem_cache_create, we search through the malloc_sizes array.
2587 * If we are creating a malloc_sizes cache here it would not be visible to
2588 * kmem_find_general_cachep till the initialization is complete.
2589 * Hence we cannot have slabp_cache same as the original cache.
2591 static struct slab
*alloc_slabmgmt(struct kmem_cache
*cachep
, void *objp
,
2592 int colour_off
, gfp_t local_flags
,
2597 if (OFF_SLAB(cachep
)) {
2598 /* Slab management obj is off-slab. */
2599 slabp
= kmem_cache_alloc_node(cachep
->slabp_cache
,
2600 local_flags
& ~GFP_THISNODE
, nodeid
);
2604 slabp
= objp
+ colour_off
;
2605 colour_off
+= cachep
->slab_size
;
2608 slabp
->colouroff
= colour_off
;
2609 slabp
->s_mem
= objp
+ colour_off
;
2610 slabp
->nodeid
= nodeid
;
2614 static inline kmem_bufctl_t
*slab_bufctl(struct slab
*slabp
)
2616 return (kmem_bufctl_t
*) (slabp
+ 1);
2619 static void cache_init_objs(struct kmem_cache
*cachep
,
2620 struct slab
*slabp
, unsigned long ctor_flags
)
2624 for (i
= 0; i
< cachep
->num
; i
++) {
2625 void *objp
= index_to_obj(cachep
, slabp
, i
);
2627 /* need to poison the objs? */
2628 if (cachep
->flags
& SLAB_POISON
)
2629 poison_obj(cachep
, objp
, POISON_FREE
);
2630 if (cachep
->flags
& SLAB_STORE_USER
)
2631 *dbg_userword(cachep
, objp
) = NULL
;
2633 if (cachep
->flags
& SLAB_RED_ZONE
) {
2634 *dbg_redzone1(cachep
, objp
) = RED_INACTIVE
;
2635 *dbg_redzone2(cachep
, objp
) = RED_INACTIVE
;
2638 * Constructors are not allowed to allocate memory from the same
2639 * cache which they are a constructor for. Otherwise, deadlock.
2640 * They must also be threaded.
2642 if (cachep
->ctor
&& !(cachep
->flags
& SLAB_POISON
))
2643 cachep
->ctor(objp
+ obj_offset(cachep
), cachep
,
2646 if (cachep
->flags
& SLAB_RED_ZONE
) {
2647 if (*dbg_redzone2(cachep
, objp
) != RED_INACTIVE
)
2648 slab_error(cachep
, "constructor overwrote the"
2649 " end of an object");
2650 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
)
2651 slab_error(cachep
, "constructor overwrote the"
2652 " start of an object");
2654 if ((cachep
->buffer_size
% PAGE_SIZE
) == 0 &&
2655 OFF_SLAB(cachep
) && cachep
->flags
& SLAB_POISON
)
2656 kernel_map_pages(virt_to_page(objp
),
2657 cachep
->buffer_size
/ PAGE_SIZE
, 0);
2660 cachep
->ctor(objp
, cachep
, ctor_flags
);
2662 slab_bufctl(slabp
)[i
] = i
+ 1;
2664 slab_bufctl(slabp
)[i
- 1] = BUFCTL_END
;
2668 static void kmem_flagcheck(struct kmem_cache
*cachep
, gfp_t flags
)
2670 if (CONFIG_ZONE_DMA_FLAG
) {
2671 if (flags
& GFP_DMA
)
2672 BUG_ON(!(cachep
->gfpflags
& GFP_DMA
));
2674 BUG_ON(cachep
->gfpflags
& GFP_DMA
);
2678 static void *slab_get_obj(struct kmem_cache
*cachep
, struct slab
*slabp
,
2681 void *objp
= index_to_obj(cachep
, slabp
, slabp
->free
);
2685 next
= slab_bufctl(slabp
)[slabp
->free
];
2687 slab_bufctl(slabp
)[slabp
->free
] = BUFCTL_FREE
;
2688 WARN_ON(slabp
->nodeid
!= nodeid
);
2695 static void slab_put_obj(struct kmem_cache
*cachep
, struct slab
*slabp
,
2696 void *objp
, int nodeid
)
2698 unsigned int objnr
= obj_to_index(cachep
, slabp
, objp
);
2701 /* Verify that the slab belongs to the intended node */
2702 WARN_ON(slabp
->nodeid
!= nodeid
);
2704 if (slab_bufctl(slabp
)[objnr
] + 1 <= SLAB_LIMIT
+ 1) {
2705 printk(KERN_ERR
"slab: double free detected in cache "
2706 "'%s', objp %p\n", cachep
->name
, objp
);
2710 slab_bufctl(slabp
)[objnr
] = slabp
->free
;
2711 slabp
->free
= objnr
;
2716 * Map pages beginning at addr to the given cache and slab. This is required
2717 * for the slab allocator to be able to lookup the cache and slab of a
2718 * virtual address for kfree, ksize, kmem_ptr_validate, and slab debugging.
2720 static void slab_map_pages(struct kmem_cache
*cache
, struct slab
*slab
,
2726 page
= virt_to_page(addr
);
2729 if (likely(!PageCompound(page
)))
2730 nr_pages
<<= cache
->gfporder
;
2733 page_set_cache(page
, cache
);
2734 page_set_slab(page
, slab
);
2736 } while (--nr_pages
);
2740 * Grow (by 1) the number of slabs within a cache. This is called by
2741 * kmem_cache_alloc() when there are no active objs left in a cache.
2743 static int cache_grow(struct kmem_cache
*cachep
,
2744 gfp_t flags
, int nodeid
, void *objp
)
2749 unsigned long ctor_flags
;
2750 struct kmem_list3
*l3
;
2753 * Be lazy and only check for valid flags here, keeping it out of the
2754 * critical path in kmem_cache_alloc().
2756 BUG_ON(flags
& ~(GFP_DMA
| GFP_LEVEL_MASK
| __GFP_NO_GROW
));
2757 if (flags
& __GFP_NO_GROW
)
2760 ctor_flags
= SLAB_CTOR_CONSTRUCTOR
;
2761 local_flags
= (flags
& GFP_LEVEL_MASK
);
2762 if (!(local_flags
& __GFP_WAIT
))
2764 * Not allowed to sleep. Need to tell a constructor about
2765 * this - it might need to know...
2767 ctor_flags
|= SLAB_CTOR_ATOMIC
;
2769 /* Take the l3 list lock to change the colour_next on this node */
2771 l3
= cachep
->nodelists
[nodeid
];
2772 spin_lock(&l3
->list_lock
);
2774 /* Get colour for the slab, and cal the next value. */
2775 offset
= l3
->colour_next
;
2777 if (l3
->colour_next
>= cachep
->colour
)
2778 l3
->colour_next
= 0;
2779 spin_unlock(&l3
->list_lock
);
2781 offset
*= cachep
->colour_off
;
2783 if (local_flags
& __GFP_WAIT
)
2787 * The test for missing atomic flag is performed here, rather than
2788 * the more obvious place, simply to reduce the critical path length
2789 * in kmem_cache_alloc(). If a caller is seriously mis-behaving they
2790 * will eventually be caught here (where it matters).
2792 kmem_flagcheck(cachep
, flags
);
2795 * Get mem for the objs. Attempt to allocate a physical page from
2799 objp
= kmem_getpages(cachep
, flags
, nodeid
);
2803 /* Get slab management. */
2804 slabp
= alloc_slabmgmt(cachep
, objp
, offset
,
2805 local_flags
& ~GFP_THISNODE
, nodeid
);
2809 slabp
->nodeid
= nodeid
;
2810 slab_map_pages(cachep
, slabp
, objp
);
2812 cache_init_objs(cachep
, slabp
, ctor_flags
);
2814 if (local_flags
& __GFP_WAIT
)
2815 local_irq_disable();
2817 spin_lock(&l3
->list_lock
);
2819 /* Make slab active. */
2820 list_add_tail(&slabp
->list
, &(l3
->slabs_free
));
2821 STATS_INC_GROWN(cachep
);
2822 l3
->free_objects
+= cachep
->num
;
2823 spin_unlock(&l3
->list_lock
);
2826 kmem_freepages(cachep
, objp
);
2828 if (local_flags
& __GFP_WAIT
)
2829 local_irq_disable();
2836 * Perform extra freeing checks:
2837 * - detect bad pointers.
2838 * - POISON/RED_ZONE checking
2839 * - destructor calls, for caches with POISON+dtor
2841 static void kfree_debugcheck(const void *objp
)
2843 if (!virt_addr_valid(objp
)) {
2844 printk(KERN_ERR
"kfree_debugcheck: out of range ptr %lxh.\n",
2845 (unsigned long)objp
);
2850 static inline void verify_redzone_free(struct kmem_cache
*cache
, void *obj
)
2852 unsigned long redzone1
, redzone2
;
2854 redzone1
= *dbg_redzone1(cache
, obj
);
2855 redzone2
= *dbg_redzone2(cache
, obj
);
2860 if (redzone1
== RED_ACTIVE
&& redzone2
== RED_ACTIVE
)
2863 if (redzone1
== RED_INACTIVE
&& redzone2
== RED_INACTIVE
)
2864 slab_error(cache
, "double free detected");
2866 slab_error(cache
, "memory outside object was overwritten");
2868 printk(KERN_ERR
"%p: redzone 1:0x%lx, redzone 2:0x%lx.\n",
2869 obj
, redzone1
, redzone2
);
2872 static void *cache_free_debugcheck(struct kmem_cache
*cachep
, void *objp
,
2879 objp
-= obj_offset(cachep
);
2880 kfree_debugcheck(objp
);
2881 page
= virt_to_page(objp
);
2883 slabp
= page_get_slab(page
);
2885 if (cachep
->flags
& SLAB_RED_ZONE
) {
2886 verify_redzone_free(cachep
, objp
);
2887 *dbg_redzone1(cachep
, objp
) = RED_INACTIVE
;
2888 *dbg_redzone2(cachep
, objp
) = RED_INACTIVE
;
2890 if (cachep
->flags
& SLAB_STORE_USER
)
2891 *dbg_userword(cachep
, objp
) = caller
;
2893 objnr
= obj_to_index(cachep
, slabp
, objp
);
2895 BUG_ON(objnr
>= cachep
->num
);
2896 BUG_ON(objp
!= index_to_obj(cachep
, slabp
, objnr
));
2898 if (cachep
->flags
& SLAB_DEBUG_INITIAL
) {
2900 * Need to call the slab's constructor so the caller can
2901 * perform a verify of its state (debugging). Called without
2902 * the cache-lock held.
2904 cachep
->ctor(objp
+ obj_offset(cachep
),
2905 cachep
, SLAB_CTOR_CONSTRUCTOR
| SLAB_CTOR_VERIFY
);
2907 if (cachep
->flags
& SLAB_POISON
&& cachep
->dtor
) {
2908 /* we want to cache poison the object,
2909 * call the destruction callback
2911 cachep
->dtor(objp
+ obj_offset(cachep
), cachep
, 0);
2913 #ifdef CONFIG_DEBUG_SLAB_LEAK
2914 slab_bufctl(slabp
)[objnr
] = BUFCTL_FREE
;
2916 if (cachep
->flags
& SLAB_POISON
) {
2917 #ifdef CONFIG_DEBUG_PAGEALLOC
2918 if ((cachep
->buffer_size
% PAGE_SIZE
)==0 && OFF_SLAB(cachep
)) {
2919 store_stackinfo(cachep
, objp
, (unsigned long)caller
);
2920 kernel_map_pages(virt_to_page(objp
),
2921 cachep
->buffer_size
/ PAGE_SIZE
, 0);
2923 poison_obj(cachep
, objp
, POISON_FREE
);
2926 poison_obj(cachep
, objp
, POISON_FREE
);
2932 static void check_slabp(struct kmem_cache
*cachep
, struct slab
*slabp
)
2937 /* Check slab's freelist to see if this obj is there. */
2938 for (i
= slabp
->free
; i
!= BUFCTL_END
; i
= slab_bufctl(slabp
)[i
]) {
2940 if (entries
> cachep
->num
|| i
>= cachep
->num
)
2943 if (entries
!= cachep
->num
- slabp
->inuse
) {
2945 printk(KERN_ERR
"slab: Internal list corruption detected in "
2946 "cache '%s'(%d), slabp %p(%d). Hexdump:\n",
2947 cachep
->name
, cachep
->num
, slabp
, slabp
->inuse
);
2949 i
< sizeof(*slabp
) + cachep
->num
* sizeof(kmem_bufctl_t
);
2952 printk("\n%03x:", i
);
2953 printk(" %02x", ((unsigned char *)slabp
)[i
]);
2960 #define kfree_debugcheck(x) do { } while(0)
2961 #define cache_free_debugcheck(x,objp,z) (objp)
2962 #define check_slabp(x,y) do { } while(0)
2965 static void *cache_alloc_refill(struct kmem_cache
*cachep
, gfp_t flags
)
2968 struct kmem_list3
*l3
;
2969 struct array_cache
*ac
;
2972 node
= numa_node_id();
2975 ac
= cpu_cache_get(cachep
);
2977 batchcount
= ac
->batchcount
;
2978 if (!ac
->touched
&& batchcount
> BATCHREFILL_LIMIT
) {
2980 * If there was little recent activity on this cache, then
2981 * perform only a partial refill. Otherwise we could generate
2984 batchcount
= BATCHREFILL_LIMIT
;
2986 l3
= cachep
->nodelists
[node
];
2988 BUG_ON(ac
->avail
> 0 || !l3
);
2989 spin_lock(&l3
->list_lock
);
2991 /* See if we can refill from the shared array */
2992 if (l3
->shared
&& transfer_objects(ac
, l3
->shared
, batchcount
))
2995 while (batchcount
> 0) {
2996 struct list_head
*entry
;
2998 /* Get slab alloc is to come from. */
2999 entry
= l3
->slabs_partial
.next
;
3000 if (entry
== &l3
->slabs_partial
) {
3001 l3
->free_touched
= 1;
3002 entry
= l3
->slabs_free
.next
;
3003 if (entry
== &l3
->slabs_free
)
3007 slabp
= list_entry(entry
, struct slab
, list
);
3008 check_slabp(cachep
, slabp
);
3009 check_spinlock_acquired(cachep
);
3012 * The slab was either on partial or free list so
3013 * there must be at least one object available for
3016 BUG_ON(slabp
->inuse
< 0 || slabp
->inuse
>= cachep
->num
);
3018 while (slabp
->inuse
< cachep
->num
&& batchcount
--) {
3019 STATS_INC_ALLOCED(cachep
);
3020 STATS_INC_ACTIVE(cachep
);
3021 STATS_SET_HIGH(cachep
);
3023 ac
->entry
[ac
->avail
++] = slab_get_obj(cachep
, slabp
,
3026 check_slabp(cachep
, slabp
);
3028 /* move slabp to correct slabp list: */
3029 list_del(&slabp
->list
);
3030 if (slabp
->free
== BUFCTL_END
)
3031 list_add(&slabp
->list
, &l3
->slabs_full
);
3033 list_add(&slabp
->list
, &l3
->slabs_partial
);
3037 l3
->free_objects
-= ac
->avail
;
3039 spin_unlock(&l3
->list_lock
);
3041 if (unlikely(!ac
->avail
)) {
3043 x
= cache_grow(cachep
, flags
| GFP_THISNODE
, node
, NULL
);
3045 /* cache_grow can reenable interrupts, then ac could change. */
3046 ac
= cpu_cache_get(cachep
);
3047 if (!x
&& ac
->avail
== 0) /* no objects in sight? abort */
3050 if (!ac
->avail
) /* objects refilled by interrupt? */
3054 return ac
->entry
[--ac
->avail
];
3057 static inline void cache_alloc_debugcheck_before(struct kmem_cache
*cachep
,
3060 might_sleep_if(flags
& __GFP_WAIT
);
3062 kmem_flagcheck(cachep
, flags
);
3067 static void *cache_alloc_debugcheck_after(struct kmem_cache
*cachep
,
3068 gfp_t flags
, void *objp
, void *caller
)
3072 if (cachep
->flags
& SLAB_POISON
) {
3073 #ifdef CONFIG_DEBUG_PAGEALLOC
3074 if ((cachep
->buffer_size
% PAGE_SIZE
) == 0 && OFF_SLAB(cachep
))
3075 kernel_map_pages(virt_to_page(objp
),
3076 cachep
->buffer_size
/ PAGE_SIZE
, 1);
3078 check_poison_obj(cachep
, objp
);
3080 check_poison_obj(cachep
, objp
);
3082 poison_obj(cachep
, objp
, POISON_INUSE
);
3084 if (cachep
->flags
& SLAB_STORE_USER
)
3085 *dbg_userword(cachep
, objp
) = caller
;
3087 if (cachep
->flags
& SLAB_RED_ZONE
) {
3088 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
||
3089 *dbg_redzone2(cachep
, objp
) != RED_INACTIVE
) {
3090 slab_error(cachep
, "double free, or memory outside"
3091 " object was overwritten");
3093 "%p: redzone 1:0x%lx, redzone 2:0x%lx\n",
3094 objp
, *dbg_redzone1(cachep
, objp
),
3095 *dbg_redzone2(cachep
, objp
));
3097 *dbg_redzone1(cachep
, objp
) = RED_ACTIVE
;
3098 *dbg_redzone2(cachep
, objp
) = RED_ACTIVE
;
3100 #ifdef CONFIG_DEBUG_SLAB_LEAK
3105 slabp
= page_get_slab(virt_to_page(objp
));
3106 objnr
= (unsigned)(objp
- slabp
->s_mem
) / cachep
->buffer_size
;
3107 slab_bufctl(slabp
)[objnr
] = BUFCTL_ACTIVE
;
3110 objp
+= obj_offset(cachep
);
3111 if (cachep
->ctor
&& cachep
->flags
& SLAB_POISON
) {
3112 unsigned long ctor_flags
= SLAB_CTOR_CONSTRUCTOR
;
3114 if (!(flags
& __GFP_WAIT
))
3115 ctor_flags
|= SLAB_CTOR_ATOMIC
;
3117 cachep
->ctor(objp
, cachep
, ctor_flags
);
3119 #if ARCH_SLAB_MINALIGN
3120 if ((u32
)objp
& (ARCH_SLAB_MINALIGN
-1)) {
3121 printk(KERN_ERR
"0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n",
3122 objp
, ARCH_SLAB_MINALIGN
);
3128 #define cache_alloc_debugcheck_after(a,b,objp,d) (objp)
3131 #ifdef CONFIG_FAILSLAB
3133 static struct failslab_attr
{
3135 struct fault_attr attr
;
3137 u32 ignore_gfp_wait
;
3138 #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
3139 struct dentry
*ignore_gfp_wait_file
;
3143 .attr
= FAULT_ATTR_INITIALIZER
,
3144 .ignore_gfp_wait
= 1,
3147 static int __init
setup_failslab(char *str
)
3149 return setup_fault_attr(&failslab
.attr
, str
);
3151 __setup("failslab=", setup_failslab
);
3153 static int should_failslab(struct kmem_cache
*cachep
, gfp_t flags
)
3155 if (cachep
== &cache_cache
)
3157 if (flags
& __GFP_NOFAIL
)
3159 if (failslab
.ignore_gfp_wait
&& (flags
& __GFP_WAIT
))
3162 return should_fail(&failslab
.attr
, obj_size(cachep
));
3165 #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
3167 static int __init
failslab_debugfs(void)
3169 mode_t mode
= S_IFREG
| S_IRUSR
| S_IWUSR
;
3173 err
= init_fault_attr_dentries(&failslab
.attr
, "failslab");
3176 dir
= failslab
.attr
.dentries
.dir
;
3178 failslab
.ignore_gfp_wait_file
=
3179 debugfs_create_bool("ignore-gfp-wait", mode
, dir
,
3180 &failslab
.ignore_gfp_wait
);
3182 if (!failslab
.ignore_gfp_wait_file
) {
3184 debugfs_remove(failslab
.ignore_gfp_wait_file
);
3185 cleanup_fault_attr_dentries(&failslab
.attr
);
3191 late_initcall(failslab_debugfs
);
3193 #endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
3195 #else /* CONFIG_FAILSLAB */
3197 static inline int should_failslab(struct kmem_cache
*cachep
, gfp_t flags
)
3202 #endif /* CONFIG_FAILSLAB */
3204 static inline void *____cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3207 struct array_cache
*ac
;
3211 if (should_failslab(cachep
, flags
))
3214 ac
= cpu_cache_get(cachep
);
3215 if (likely(ac
->avail
)) {
3216 STATS_INC_ALLOCHIT(cachep
);
3218 objp
= ac
->entry
[--ac
->avail
];
3220 STATS_INC_ALLOCMISS(cachep
);
3221 objp
= cache_alloc_refill(cachep
, flags
);
3228 * Try allocating on another node if PF_SPREAD_SLAB|PF_MEMPOLICY.
3230 * If we are in_interrupt, then process context, including cpusets and
3231 * mempolicy, may not apply and should not be used for allocation policy.
3233 static void *alternate_node_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3235 int nid_alloc
, nid_here
;
3237 if (in_interrupt() || (flags
& __GFP_THISNODE
))
3239 nid_alloc
= nid_here
= numa_node_id();
3240 if (cpuset_do_slab_mem_spread() && (cachep
->flags
& SLAB_MEM_SPREAD
))
3241 nid_alloc
= cpuset_mem_spread_node();
3242 else if (current
->mempolicy
)
3243 nid_alloc
= slab_node(current
->mempolicy
);
3244 if (nid_alloc
!= nid_here
)
3245 return ____cache_alloc_node(cachep
, flags
, nid_alloc
);
3250 * Fallback function if there was no memory available and no objects on a
3251 * certain node and fall back is permitted. First we scan all the
3252 * available nodelists for available objects. If that fails then we
3253 * perform an allocation without specifying a node. This allows the page
3254 * allocator to do its reclaim / fallback magic. We then insert the
3255 * slab into the proper nodelist and then allocate from it.
3257 static void *fallback_alloc(struct kmem_cache
*cache
, gfp_t flags
)
3259 struct zonelist
*zonelist
;
3265 if (flags
& __GFP_THISNODE
)
3268 zonelist
= &NODE_DATA(slab_node(current
->mempolicy
))
3269 ->node_zonelists
[gfp_zone(flags
)];
3270 local_flags
= (flags
& GFP_LEVEL_MASK
);
3274 * Look through allowed nodes for objects available
3275 * from existing per node queues.
3277 for (z
= zonelist
->zones
; *z
&& !obj
; z
++) {
3278 nid
= zone_to_nid(*z
);
3280 if (cpuset_zone_allowed_hardwall(*z
, flags
) &&
3281 cache
->nodelists
[nid
] &&
3282 cache
->nodelists
[nid
]->free_objects
)
3283 obj
= ____cache_alloc_node(cache
,
3284 flags
| GFP_THISNODE
, nid
);
3287 if (!obj
&& !(flags
& __GFP_NO_GROW
)) {
3289 * This allocation will be performed within the constraints
3290 * of the current cpuset / memory policy requirements.
3291 * We may trigger various forms of reclaim on the allowed
3292 * set and go into memory reserves if necessary.
3294 if (local_flags
& __GFP_WAIT
)
3296 kmem_flagcheck(cache
, flags
);
3297 obj
= kmem_getpages(cache
, flags
, -1);
3298 if (local_flags
& __GFP_WAIT
)
3299 local_irq_disable();
3302 * Insert into the appropriate per node queues
3304 nid
= page_to_nid(virt_to_page(obj
));
3305 if (cache_grow(cache
, flags
, nid
, obj
)) {
3306 obj
= ____cache_alloc_node(cache
,
3307 flags
| GFP_THISNODE
, nid
);
3310 * Another processor may allocate the
3311 * objects in the slab since we are
3312 * not holding any locks.
3316 /* cache_grow already freed obj */
3325 * A interface to enable slab creation on nodeid
3327 static void *____cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
,
3330 struct list_head
*entry
;
3332 struct kmem_list3
*l3
;
3336 l3
= cachep
->nodelists
[nodeid
];
3341 spin_lock(&l3
->list_lock
);
3342 entry
= l3
->slabs_partial
.next
;
3343 if (entry
== &l3
->slabs_partial
) {
3344 l3
->free_touched
= 1;
3345 entry
= l3
->slabs_free
.next
;
3346 if (entry
== &l3
->slabs_free
)
3350 slabp
= list_entry(entry
, struct slab
, list
);
3351 check_spinlock_acquired_node(cachep
, nodeid
);
3352 check_slabp(cachep
, slabp
);
3354 STATS_INC_NODEALLOCS(cachep
);
3355 STATS_INC_ACTIVE(cachep
);
3356 STATS_SET_HIGH(cachep
);
3358 BUG_ON(slabp
->inuse
== cachep
->num
);
3360 obj
= slab_get_obj(cachep
, slabp
, nodeid
);
3361 check_slabp(cachep
, slabp
);
3363 /* move slabp to correct slabp list: */
3364 list_del(&slabp
->list
);
3366 if (slabp
->free
== BUFCTL_END
)
3367 list_add(&slabp
->list
, &l3
->slabs_full
);
3369 list_add(&slabp
->list
, &l3
->slabs_partial
);
3371 spin_unlock(&l3
->list_lock
);
3375 spin_unlock(&l3
->list_lock
);
3376 x
= cache_grow(cachep
, flags
| GFP_THISNODE
, nodeid
, NULL
);
3380 return fallback_alloc(cachep
, flags
);
3387 * kmem_cache_alloc_node - Allocate an object on the specified node
3388 * @cachep: The cache to allocate from.
3389 * @flags: See kmalloc().
3390 * @nodeid: node number of the target node.
3391 * @caller: return address of caller, used for debug information
3393 * Identical to kmem_cache_alloc but it will allocate memory on the given
3394 * node, which can improve the performance for cpu bound structures.
3396 * Fallback to other node is possible if __GFP_THISNODE is not set.
3398 static __always_inline
void *
3399 __cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
,
3402 unsigned long save_flags
;
3405 cache_alloc_debugcheck_before(cachep
, flags
);
3406 local_irq_save(save_flags
);
3408 if (unlikely(nodeid
== -1))
3409 nodeid
= numa_node_id();
3411 if (unlikely(!cachep
->nodelists
[nodeid
])) {
3412 /* Node not bootstrapped yet */
3413 ptr
= fallback_alloc(cachep
, flags
);
3417 if (nodeid
== numa_node_id()) {
3419 * Use the locally cached objects if possible.
3420 * However ____cache_alloc does not allow fallback
3421 * to other nodes. It may fail while we still have
3422 * objects on other nodes available.
3424 ptr
= ____cache_alloc(cachep
, flags
);
3428 /* ___cache_alloc_node can fall back to other nodes */
3429 ptr
= ____cache_alloc_node(cachep
, flags
, nodeid
);
3431 local_irq_restore(save_flags
);
3432 ptr
= cache_alloc_debugcheck_after(cachep
, flags
, ptr
, caller
);
3437 static __always_inline
void *
3438 __do_cache_alloc(struct kmem_cache
*cache
, gfp_t flags
)
3442 if (unlikely(current
->flags
& (PF_SPREAD_SLAB
| PF_MEMPOLICY
))) {
3443 objp
= alternate_node_alloc(cache
, flags
);
3447 objp
= ____cache_alloc(cache
, flags
);
3450 * We may just have run out of memory on the local node.
3451 * ____cache_alloc_node() knows how to locate memory on other nodes
3454 objp
= ____cache_alloc_node(cache
, flags
, numa_node_id());
3461 static __always_inline
void *
3462 __do_cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3464 return ____cache_alloc(cachep
, flags
);
3467 #endif /* CONFIG_NUMA */
3469 static __always_inline
void *
3470 __cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
, void *caller
)
3472 unsigned long save_flags
;
3475 cache_alloc_debugcheck_before(cachep
, flags
);
3476 local_irq_save(save_flags
);
3477 objp
= __do_cache_alloc(cachep
, flags
);
3478 local_irq_restore(save_flags
);
3479 objp
= cache_alloc_debugcheck_after(cachep
, flags
, objp
, caller
);
3486 * Caller needs to acquire correct kmem_list's list_lock
3488 static void free_block(struct kmem_cache
*cachep
, void **objpp
, int nr_objects
,
3492 struct kmem_list3
*l3
;
3494 for (i
= 0; i
< nr_objects
; i
++) {
3495 void *objp
= objpp
[i
];
3498 slabp
= virt_to_slab(objp
);
3499 l3
= cachep
->nodelists
[node
];
3500 list_del(&slabp
->list
);
3501 check_spinlock_acquired_node(cachep
, node
);
3502 check_slabp(cachep
, slabp
);
3503 slab_put_obj(cachep
, slabp
, objp
, node
);
3504 STATS_DEC_ACTIVE(cachep
);
3506 check_slabp(cachep
, slabp
);
3508 /* fixup slab chains */
3509 if (slabp
->inuse
== 0) {
3510 if (l3
->free_objects
> l3
->free_limit
) {
3511 l3
->free_objects
-= cachep
->num
;
3512 /* No need to drop any previously held
3513 * lock here, even if we have a off-slab slab
3514 * descriptor it is guaranteed to come from
3515 * a different cache, refer to comments before
3518 slab_destroy(cachep
, slabp
);
3520 list_add(&slabp
->list
, &l3
->slabs_free
);
3523 /* Unconditionally move a slab to the end of the
3524 * partial list on free - maximum time for the
3525 * other objects to be freed, too.
3527 list_add_tail(&slabp
->list
, &l3
->slabs_partial
);
3532 static void cache_flusharray(struct kmem_cache
*cachep
, struct array_cache
*ac
)
3535 struct kmem_list3
*l3
;
3536 int node
= numa_node_id();
3538 batchcount
= ac
->batchcount
;
3540 BUG_ON(!batchcount
|| batchcount
> ac
->avail
);
3543 l3
= cachep
->nodelists
[node
];
3544 spin_lock(&l3
->list_lock
);
3546 struct array_cache
*shared_array
= l3
->shared
;
3547 int max
= shared_array
->limit
- shared_array
->avail
;
3549 if (batchcount
> max
)
3551 memcpy(&(shared_array
->entry
[shared_array
->avail
]),
3552 ac
->entry
, sizeof(void *) * batchcount
);
3553 shared_array
->avail
+= batchcount
;
3558 free_block(cachep
, ac
->entry
, batchcount
, node
);
3563 struct list_head
*p
;
3565 p
= l3
->slabs_free
.next
;
3566 while (p
!= &(l3
->slabs_free
)) {
3569 slabp
= list_entry(p
, struct slab
, list
);
3570 BUG_ON(slabp
->inuse
);
3575 STATS_SET_FREEABLE(cachep
, i
);
3578 spin_unlock(&l3
->list_lock
);
3579 ac
->avail
-= batchcount
;
3580 memmove(ac
->entry
, &(ac
->entry
[batchcount
]), sizeof(void *)*ac
->avail
);
3584 * Release an obj back to its cache. If the obj has a constructed state, it must
3585 * be in this state _before_ it is released. Called with disabled ints.
3587 static inline void __cache_free(struct kmem_cache
*cachep
, void *objp
)
3589 struct array_cache
*ac
= cpu_cache_get(cachep
);
3592 objp
= cache_free_debugcheck(cachep
, objp
, __builtin_return_address(0));
3594 if (use_alien_caches
&& cache_free_alien(cachep
, objp
))
3597 if (likely(ac
->avail
< ac
->limit
)) {
3598 STATS_INC_FREEHIT(cachep
);
3599 ac
->entry
[ac
->avail
++] = objp
;
3602 STATS_INC_FREEMISS(cachep
);
3603 cache_flusharray(cachep
, ac
);
3604 ac
->entry
[ac
->avail
++] = objp
;
3609 * kmem_cache_alloc - Allocate an object
3610 * @cachep: The cache to allocate from.
3611 * @flags: See kmalloc().
3613 * Allocate an object from this cache. The flags are only relevant
3614 * if the cache has no available objects.
3616 void *kmem_cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3618 return __cache_alloc(cachep
, flags
, __builtin_return_address(0));
3620 EXPORT_SYMBOL(kmem_cache_alloc
);
3623 * kmem_cache_zalloc - Allocate an object. The memory is set to zero.
3624 * @cache: The cache to allocate from.
3625 * @flags: See kmalloc().
3627 * Allocate an object from this cache and set the allocated memory to zero.
3628 * The flags are only relevant if the cache has no available objects.
3630 void *kmem_cache_zalloc(struct kmem_cache
*cache
, gfp_t flags
)
3632 void *ret
= __cache_alloc(cache
, flags
, __builtin_return_address(0));
3634 memset(ret
, 0, obj_size(cache
));
3637 EXPORT_SYMBOL(kmem_cache_zalloc
);
3640 * kmem_ptr_validate - check if an untrusted pointer might
3642 * @cachep: the cache we're checking against
3643 * @ptr: pointer to validate
3645 * This verifies that the untrusted pointer looks sane:
3646 * it is _not_ a guarantee that the pointer is actually
3647 * part of the slab cache in question, but it at least
3648 * validates that the pointer can be dereferenced and
3649 * looks half-way sane.
3651 * Currently only used for dentry validation.
3653 int kmem_ptr_validate(struct kmem_cache
*cachep
, const void *ptr
)
3655 unsigned long addr
= (unsigned long)ptr
;
3656 unsigned long min_addr
= PAGE_OFFSET
;
3657 unsigned long align_mask
= BYTES_PER_WORD
- 1;
3658 unsigned long size
= cachep
->buffer_size
;
3661 if (unlikely(addr
< min_addr
))
3663 if (unlikely(addr
> (unsigned long)high_memory
- size
))
3665 if (unlikely(addr
& align_mask
))
3667 if (unlikely(!kern_addr_valid(addr
)))
3669 if (unlikely(!kern_addr_valid(addr
+ size
- 1)))
3671 page
= virt_to_page(ptr
);
3672 if (unlikely(!PageSlab(page
)))
3674 if (unlikely(page_get_cache(page
) != cachep
))
3682 void *kmem_cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
3684 return __cache_alloc_node(cachep
, flags
, nodeid
,
3685 __builtin_return_address(0));
3687 EXPORT_SYMBOL(kmem_cache_alloc_node
);
3689 static __always_inline
void *
3690 __do_kmalloc_node(size_t size
, gfp_t flags
, int node
, void *caller
)
3692 struct kmem_cache
*cachep
;
3694 cachep
= kmem_find_general_cachep(size
, flags
);
3695 if (unlikely(cachep
== NULL
))
3697 return kmem_cache_alloc_node(cachep
, flags
, node
);
3700 #ifdef CONFIG_DEBUG_SLAB
3701 void *__kmalloc_node(size_t size
, gfp_t flags
, int node
)
3703 return __do_kmalloc_node(size
, flags
, node
,
3704 __builtin_return_address(0));
3706 EXPORT_SYMBOL(__kmalloc_node
);
3708 void *__kmalloc_node_track_caller(size_t size
, gfp_t flags
,
3709 int node
, void *caller
)
3711 return __do_kmalloc_node(size
, flags
, node
, caller
);
3713 EXPORT_SYMBOL(__kmalloc_node_track_caller
);
3715 void *__kmalloc_node(size_t size
, gfp_t flags
, int node
)
3717 return __do_kmalloc_node(size
, flags
, node
, NULL
);
3719 EXPORT_SYMBOL(__kmalloc_node
);
3720 #endif /* CONFIG_DEBUG_SLAB */
3721 #endif /* CONFIG_NUMA */
3724 * __do_kmalloc - allocate memory
3725 * @size: how many bytes of memory are required.
3726 * @flags: the type of memory to allocate (see kmalloc).
3727 * @caller: function caller for debug tracking of the caller
3729 static __always_inline
void *__do_kmalloc(size_t size
, gfp_t flags
,
3732 struct kmem_cache
*cachep
;
3734 /* If you want to save a few bytes .text space: replace
3736 * Then kmalloc uses the uninlined functions instead of the inline
3739 cachep
= __find_general_cachep(size
, flags
);
3740 if (unlikely(cachep
== NULL
))
3742 return __cache_alloc(cachep
, flags
, caller
);
3746 #ifdef CONFIG_DEBUG_SLAB
3747 void *__kmalloc(size_t size
, gfp_t flags
)
3749 return __do_kmalloc(size
, flags
, __builtin_return_address(0));
3751 EXPORT_SYMBOL(__kmalloc
);
3753 void *__kmalloc_track_caller(size_t size
, gfp_t flags
, void *caller
)
3755 return __do_kmalloc(size
, flags
, caller
);
3757 EXPORT_SYMBOL(__kmalloc_track_caller
);
3760 void *__kmalloc(size_t size
, gfp_t flags
)
3762 return __do_kmalloc(size
, flags
, NULL
);
3764 EXPORT_SYMBOL(__kmalloc
);
3768 * krealloc - reallocate memory. The contents will remain unchanged.
3770 * @p: object to reallocate memory for.
3771 * @new_size: how many bytes of memory are required.
3772 * @flags: the type of memory to allocate.
3774 * The contents of the object pointed to are preserved up to the
3775 * lesser of the new and old sizes. If @p is %NULL, krealloc()
3776 * behaves exactly like kmalloc(). If @size is 0 and @p is not a
3777 * %NULL pointer, the object pointed to is freed.
3779 void *krealloc(const void *p
, size_t new_size
, gfp_t flags
)
3781 struct kmem_cache
*cache
, *new_cache
;
3785 return kmalloc_track_caller(new_size
, flags
);
3787 if (unlikely(!new_size
)) {
3792 cache
= virt_to_cache(p
);
3793 new_cache
= __find_general_cachep(new_size
, flags
);
3796 * If new size fits in the current cache, bail out.
3798 if (likely(cache
== new_cache
))
3802 * We are on the slow-path here so do not use __cache_alloc
3803 * because it bloats kernel text.
3805 ret
= kmalloc_track_caller(new_size
, flags
);
3807 memcpy(ret
, p
, min(new_size
, ksize(p
)));
3812 EXPORT_SYMBOL(krealloc
);
3815 * kmem_cache_free - Deallocate an object
3816 * @cachep: The cache the allocation was from.
3817 * @objp: The previously allocated object.
3819 * Free an object which was previously allocated from this
3822 void kmem_cache_free(struct kmem_cache
*cachep
, void *objp
)
3824 unsigned long flags
;
3826 BUG_ON(virt_to_cache(objp
) != cachep
);
3828 local_irq_save(flags
);
3829 debug_check_no_locks_freed(objp
, obj_size(cachep
));
3830 __cache_free(cachep
, objp
);
3831 local_irq_restore(flags
);
3833 EXPORT_SYMBOL(kmem_cache_free
);
3836 * kfree - free previously allocated memory
3837 * @objp: pointer returned by kmalloc.
3839 * If @objp is NULL, no operation is performed.
3841 * Don't free memory not originally allocated by kmalloc()
3842 * or you will run into trouble.
3844 void kfree(const void *objp
)
3846 struct kmem_cache
*c
;
3847 unsigned long flags
;
3849 if (unlikely(!objp
))
3851 local_irq_save(flags
);
3852 kfree_debugcheck(objp
);
3853 c
= virt_to_cache(objp
);
3854 debug_check_no_locks_freed(objp
, obj_size(c
));
3855 __cache_free(c
, (void *)objp
);
3856 local_irq_restore(flags
);
3858 EXPORT_SYMBOL(kfree
);
3860 unsigned int kmem_cache_size(struct kmem_cache
*cachep
)
3862 return obj_size(cachep
);
3864 EXPORT_SYMBOL(kmem_cache_size
);
3866 const char *kmem_cache_name(struct kmem_cache
*cachep
)
3868 return cachep
->name
;
3870 EXPORT_SYMBOL_GPL(kmem_cache_name
);
3873 * This initializes kmem_list3 or resizes varioius caches for all nodes.
3875 static int alloc_kmemlist(struct kmem_cache
*cachep
)
3878 struct kmem_list3
*l3
;
3879 struct array_cache
*new_shared
;
3880 struct array_cache
**new_alien
= NULL
;
3882 for_each_online_node(node
) {
3884 if (use_alien_caches
) {
3885 new_alien
= alloc_alien_cache(node
, cachep
->limit
);
3891 if (cachep
->shared
) {
3892 new_shared
= alloc_arraycache(node
,
3893 cachep
->shared
*cachep
->batchcount
,
3896 free_alien_cache(new_alien
);
3901 l3
= cachep
->nodelists
[node
];
3903 struct array_cache
*shared
= l3
->shared
;
3905 spin_lock_irq(&l3
->list_lock
);
3908 free_block(cachep
, shared
->entry
,
3909 shared
->avail
, node
);
3911 l3
->shared
= new_shared
;
3913 l3
->alien
= new_alien
;
3916 l3
->free_limit
= (1 + nr_cpus_node(node
)) *
3917 cachep
->batchcount
+ cachep
->num
;
3918 spin_unlock_irq(&l3
->list_lock
);
3920 free_alien_cache(new_alien
);
3923 l3
= kmalloc_node(sizeof(struct kmem_list3
), GFP_KERNEL
, node
);
3925 free_alien_cache(new_alien
);
3930 kmem_list3_init(l3
);
3931 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
+
3932 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
3933 l3
->shared
= new_shared
;
3934 l3
->alien
= new_alien
;
3935 l3
->free_limit
= (1 + nr_cpus_node(node
)) *
3936 cachep
->batchcount
+ cachep
->num
;
3937 cachep
->nodelists
[node
] = l3
;
3942 if (!cachep
->next
.next
) {
3943 /* Cache is not active yet. Roll back what we did */
3946 if (cachep
->nodelists
[node
]) {
3947 l3
= cachep
->nodelists
[node
];
3950 free_alien_cache(l3
->alien
);
3952 cachep
->nodelists
[node
] = NULL
;
3960 struct ccupdate_struct
{
3961 struct kmem_cache
*cachep
;
3962 struct array_cache
*new[NR_CPUS
];
3965 static void do_ccupdate_local(void *info
)
3967 struct ccupdate_struct
*new = info
;
3968 struct array_cache
*old
;
3971 old
= cpu_cache_get(new->cachep
);
3973 new->cachep
->array
[smp_processor_id()] = new->new[smp_processor_id()];
3974 new->new[smp_processor_id()] = old
;
3977 /* Always called with the cache_chain_mutex held */
3978 static int do_tune_cpucache(struct kmem_cache
*cachep
, int limit
,
3979 int batchcount
, int shared
)
3981 struct ccupdate_struct
*new;
3984 new = kzalloc(sizeof(*new), GFP_KERNEL
);
3988 for_each_online_cpu(i
) {
3989 new->new[i
] = alloc_arraycache(cpu_to_node(i
), limit
,
3992 for (i
--; i
>= 0; i
--)
3998 new->cachep
= cachep
;
4000 on_each_cpu(do_ccupdate_local
, (void *)new, 1, 1);
4003 cachep
->batchcount
= batchcount
;
4004 cachep
->limit
= limit
;
4005 cachep
->shared
= shared
;
4007 for_each_online_cpu(i
) {
4008 struct array_cache
*ccold
= new->new[i
];
4011 spin_lock_irq(&cachep
->nodelists
[cpu_to_node(i
)]->list_lock
);
4012 free_block(cachep
, ccold
->entry
, ccold
->avail
, cpu_to_node(i
));
4013 spin_unlock_irq(&cachep
->nodelists
[cpu_to_node(i
)]->list_lock
);
4017 return alloc_kmemlist(cachep
);
4020 /* Called with cache_chain_mutex held always */
4021 static int enable_cpucache(struct kmem_cache
*cachep
)
4027 * The head array serves three purposes:
4028 * - create a LIFO ordering, i.e. return objects that are cache-warm
4029 * - reduce the number of spinlock operations.
4030 * - reduce the number of linked list operations on the slab and
4031 * bufctl chains: array operations are cheaper.
4032 * The numbers are guessed, we should auto-tune as described by
4035 if (cachep
->buffer_size
> 131072)
4037 else if (cachep
->buffer_size
> PAGE_SIZE
)
4039 else if (cachep
->buffer_size
> 1024)
4041 else if (cachep
->buffer_size
> 256)
4047 * CPU bound tasks (e.g. network routing) can exhibit cpu bound
4048 * allocation behaviour: Most allocs on one cpu, most free operations
4049 * on another cpu. For these cases, an efficient object passing between
4050 * cpus is necessary. This is provided by a shared array. The array
4051 * replaces Bonwick's magazine layer.
4052 * On uniprocessor, it's functionally equivalent (but less efficient)
4053 * to a larger limit. Thus disabled by default.
4056 if (cachep
->buffer_size
<= PAGE_SIZE
&& num_possible_cpus() > 1)
4061 * With debugging enabled, large batchcount lead to excessively long
4062 * periods with disabled local interrupts. Limit the batchcount
4067 err
= do_tune_cpucache(cachep
, limit
, (limit
+ 1) / 2, shared
);
4069 printk(KERN_ERR
"enable_cpucache failed for %s, error %d.\n",
4070 cachep
->name
, -err
);
4075 * Drain an array if it contains any elements taking the l3 lock only if
4076 * necessary. Note that the l3 listlock also protects the array_cache
4077 * if drain_array() is used on the shared array.
4079 void drain_array(struct kmem_cache
*cachep
, struct kmem_list3
*l3
,
4080 struct array_cache
*ac
, int force
, int node
)
4084 if (!ac
|| !ac
->avail
)
4086 if (ac
->touched
&& !force
) {
4089 spin_lock_irq(&l3
->list_lock
);
4091 tofree
= force
? ac
->avail
: (ac
->limit
+ 4) / 5;
4092 if (tofree
> ac
->avail
)
4093 tofree
= (ac
->avail
+ 1) / 2;
4094 free_block(cachep
, ac
->entry
, tofree
, node
);
4095 ac
->avail
-= tofree
;
4096 memmove(ac
->entry
, &(ac
->entry
[tofree
]),
4097 sizeof(void *) * ac
->avail
);
4099 spin_unlock_irq(&l3
->list_lock
);
4104 * cache_reap - Reclaim memory from caches.
4105 * @w: work descriptor
4107 * Called from workqueue/eventd every few seconds.
4109 * - clear the per-cpu caches for this CPU.
4110 * - return freeable pages to the main free memory pool.
4112 * If we cannot acquire the cache chain mutex then just give up - we'll try
4113 * again on the next iteration.
4115 static void cache_reap(struct work_struct
*w
)
4117 struct kmem_cache
*searchp
;
4118 struct kmem_list3
*l3
;
4119 int node
= numa_node_id();
4120 struct delayed_work
*work
=
4121 container_of(w
, struct delayed_work
, work
);
4123 if (!mutex_trylock(&cache_chain_mutex
))
4124 /* Give up. Setup the next iteration. */
4127 list_for_each_entry(searchp
, &cache_chain
, next
) {
4131 * We only take the l3 lock if absolutely necessary and we
4132 * have established with reasonable certainty that
4133 * we can do some work if the lock was obtained.
4135 l3
= searchp
->nodelists
[node
];
4137 reap_alien(searchp
, l3
);
4139 drain_array(searchp
, l3
, cpu_cache_get(searchp
), 0, node
);
4142 * These are racy checks but it does not matter
4143 * if we skip one check or scan twice.
4145 if (time_after(l3
->next_reap
, jiffies
))
4148 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
;
4150 drain_array(searchp
, l3
, l3
->shared
, 0, node
);
4152 if (l3
->free_touched
)
4153 l3
->free_touched
= 0;
4157 freed
= drain_freelist(searchp
, l3
, (l3
->free_limit
+
4158 5 * searchp
->num
- 1) / (5 * searchp
->num
));
4159 STATS_ADD_REAPED(searchp
, freed
);
4165 mutex_unlock(&cache_chain_mutex
);
4167 refresh_cpu_vm_stats(smp_processor_id());
4169 /* Set up the next iteration */
4170 schedule_delayed_work(work
, round_jiffies_relative(REAPTIMEOUT_CPUC
));
4173 #ifdef CONFIG_PROC_FS
4175 static void print_slabinfo_header(struct seq_file
*m
)
4178 * Output format version, so at least we can change it
4179 * without _too_ many complaints.
4182 seq_puts(m
, "slabinfo - version: 2.1 (statistics)\n");
4184 seq_puts(m
, "slabinfo - version: 2.1\n");
4186 seq_puts(m
, "# name <active_objs> <num_objs> <objsize> "
4187 "<objperslab> <pagesperslab>");
4188 seq_puts(m
, " : tunables <limit> <batchcount> <sharedfactor>");
4189 seq_puts(m
, " : slabdata <active_slabs> <num_slabs> <sharedavail>");
4191 seq_puts(m
, " : globalstat <listallocs> <maxobjs> <grown> <reaped> "
4192 "<error> <maxfreeable> <nodeallocs> <remotefrees> <alienoverflow>");
4193 seq_puts(m
, " : cpustat <allochit> <allocmiss> <freehit> <freemiss>");
4198 static void *s_start(struct seq_file
*m
, loff_t
*pos
)
4201 struct list_head
*p
;
4203 mutex_lock(&cache_chain_mutex
);
4205 print_slabinfo_header(m
);
4206 p
= cache_chain
.next
;
4209 if (p
== &cache_chain
)
4212 return list_entry(p
, struct kmem_cache
, next
);
4215 static void *s_next(struct seq_file
*m
, void *p
, loff_t
*pos
)
4217 struct kmem_cache
*cachep
= p
;
4219 return cachep
->next
.next
== &cache_chain
?
4220 NULL
: list_entry(cachep
->next
.next
, struct kmem_cache
, next
);
4223 static void s_stop(struct seq_file
*m
, void *p
)
4225 mutex_unlock(&cache_chain_mutex
);
4228 static int s_show(struct seq_file
*m
, void *p
)
4230 struct kmem_cache
*cachep
= p
;
4232 unsigned long active_objs
;
4233 unsigned long num_objs
;
4234 unsigned long active_slabs
= 0;
4235 unsigned long num_slabs
, free_objects
= 0, shared_avail
= 0;
4239 struct kmem_list3
*l3
;
4243 for_each_online_node(node
) {
4244 l3
= cachep
->nodelists
[node
];
4249 spin_lock_irq(&l3
->list_lock
);
4251 list_for_each_entry(slabp
, &l3
->slabs_full
, list
) {
4252 if (slabp
->inuse
!= cachep
->num
&& !error
)
4253 error
= "slabs_full accounting error";
4254 active_objs
+= cachep
->num
;
4257 list_for_each_entry(slabp
, &l3
->slabs_partial
, list
) {
4258 if (slabp
->inuse
== cachep
->num
&& !error
)
4259 error
= "slabs_partial inuse accounting error";
4260 if (!slabp
->inuse
&& !error
)
4261 error
= "slabs_partial/inuse accounting error";
4262 active_objs
+= slabp
->inuse
;
4265 list_for_each_entry(slabp
, &l3
->slabs_free
, list
) {
4266 if (slabp
->inuse
&& !error
)
4267 error
= "slabs_free/inuse accounting error";
4270 free_objects
+= l3
->free_objects
;
4272 shared_avail
+= l3
->shared
->avail
;
4274 spin_unlock_irq(&l3
->list_lock
);
4276 num_slabs
+= active_slabs
;
4277 num_objs
= num_slabs
* cachep
->num
;
4278 if (num_objs
- active_objs
!= free_objects
&& !error
)
4279 error
= "free_objects accounting error";
4281 name
= cachep
->name
;
4283 printk(KERN_ERR
"slab: cache %s error: %s\n", name
, error
);
4285 seq_printf(m
, "%-17s %6lu %6lu %6u %4u %4d",
4286 name
, active_objs
, num_objs
, cachep
->buffer_size
,
4287 cachep
->num
, (1 << cachep
->gfporder
));
4288 seq_printf(m
, " : tunables %4u %4u %4u",
4289 cachep
->limit
, cachep
->batchcount
, cachep
->shared
);
4290 seq_printf(m
, " : slabdata %6lu %6lu %6lu",
4291 active_slabs
, num_slabs
, shared_avail
);
4294 unsigned long high
= cachep
->high_mark
;
4295 unsigned long allocs
= cachep
->num_allocations
;
4296 unsigned long grown
= cachep
->grown
;
4297 unsigned long reaped
= cachep
->reaped
;
4298 unsigned long errors
= cachep
->errors
;
4299 unsigned long max_freeable
= cachep
->max_freeable
;
4300 unsigned long node_allocs
= cachep
->node_allocs
;
4301 unsigned long node_frees
= cachep
->node_frees
;
4302 unsigned long overflows
= cachep
->node_overflow
;
4304 seq_printf(m
, " : globalstat %7lu %6lu %5lu %4lu \
4305 %4lu %4lu %4lu %4lu %4lu", allocs
, high
, grown
,
4306 reaped
, errors
, max_freeable
, node_allocs
,
4307 node_frees
, overflows
);
4311 unsigned long allochit
= atomic_read(&cachep
->allochit
);
4312 unsigned long allocmiss
= atomic_read(&cachep
->allocmiss
);
4313 unsigned long freehit
= atomic_read(&cachep
->freehit
);
4314 unsigned long freemiss
= atomic_read(&cachep
->freemiss
);
4316 seq_printf(m
, " : cpustat %6lu %6lu %6lu %6lu",
4317 allochit
, allocmiss
, freehit
, freemiss
);
4325 * slabinfo_op - iterator that generates /proc/slabinfo
4334 * num-pages-per-slab
4335 * + further values on SMP and with statistics enabled
4338 const struct seq_operations slabinfo_op
= {
4345 #define MAX_SLABINFO_WRITE 128
4347 * slabinfo_write - Tuning for the slab allocator
4349 * @buffer: user buffer
4350 * @count: data length
4353 ssize_t
slabinfo_write(struct file
*file
, const char __user
* buffer
,
4354 size_t count
, loff_t
*ppos
)
4356 char kbuf
[MAX_SLABINFO_WRITE
+ 1], *tmp
;
4357 int limit
, batchcount
, shared
, res
;
4358 struct kmem_cache
*cachep
;
4360 if (count
> MAX_SLABINFO_WRITE
)
4362 if (copy_from_user(&kbuf
, buffer
, count
))
4364 kbuf
[MAX_SLABINFO_WRITE
] = '\0';
4366 tmp
= strchr(kbuf
, ' ');
4371 if (sscanf(tmp
, " %d %d %d", &limit
, &batchcount
, &shared
) != 3)
4374 /* Find the cache in the chain of caches. */
4375 mutex_lock(&cache_chain_mutex
);
4377 list_for_each_entry(cachep
, &cache_chain
, next
) {
4378 if (!strcmp(cachep
->name
, kbuf
)) {
4379 if (limit
< 1 || batchcount
< 1 ||
4380 batchcount
> limit
|| shared
< 0) {
4383 res
= do_tune_cpucache(cachep
, limit
,
4384 batchcount
, shared
);
4389 mutex_unlock(&cache_chain_mutex
);
4395 #ifdef CONFIG_DEBUG_SLAB_LEAK
4397 static void *leaks_start(struct seq_file
*m
, loff_t
*pos
)
4400 struct list_head
*p
;
4402 mutex_lock(&cache_chain_mutex
);
4403 p
= cache_chain
.next
;
4406 if (p
== &cache_chain
)
4409 return list_entry(p
, struct kmem_cache
, next
);
4412 static inline int add_caller(unsigned long *n
, unsigned long v
)
4422 unsigned long *q
= p
+ 2 * i
;
4436 memmove(p
+ 2, p
, n
[1] * 2 * sizeof(unsigned long) - ((void *)p
- (void *)n
));
4442 static void handle_slab(unsigned long *n
, struct kmem_cache
*c
, struct slab
*s
)
4448 for (i
= 0, p
= s
->s_mem
; i
< c
->num
; i
++, p
+= c
->buffer_size
) {
4449 if (slab_bufctl(s
)[i
] != BUFCTL_ACTIVE
)
4451 if (!add_caller(n
, (unsigned long)*dbg_userword(c
, p
)))
4456 static void show_symbol(struct seq_file
*m
, unsigned long address
)
4458 #ifdef CONFIG_KALLSYMS
4461 unsigned long offset
, size
;
4462 char namebuf
[KSYM_NAME_LEN
+1];
4464 name
= kallsyms_lookup(address
, &size
, &offset
, &modname
, namebuf
);
4467 seq_printf(m
, "%s+%#lx/%#lx", name
, offset
, size
);
4469 seq_printf(m
, " [%s]", modname
);
4473 seq_printf(m
, "%p", (void *)address
);
4476 static int leaks_show(struct seq_file
*m
, void *p
)
4478 struct kmem_cache
*cachep
= p
;
4480 struct kmem_list3
*l3
;
4482 unsigned long *n
= m
->private;
4486 if (!(cachep
->flags
& SLAB_STORE_USER
))
4488 if (!(cachep
->flags
& SLAB_RED_ZONE
))
4491 /* OK, we can do it */
4495 for_each_online_node(node
) {
4496 l3
= cachep
->nodelists
[node
];
4501 spin_lock_irq(&l3
->list_lock
);
4503 list_for_each_entry(slabp
, &l3
->slabs_full
, list
)
4504 handle_slab(n
, cachep
, slabp
);
4505 list_for_each_entry(slabp
, &l3
->slabs_partial
, list
)
4506 handle_slab(n
, cachep
, slabp
);
4507 spin_unlock_irq(&l3
->list_lock
);
4509 name
= cachep
->name
;
4511 /* Increase the buffer size */
4512 mutex_unlock(&cache_chain_mutex
);
4513 m
->private = kzalloc(n
[0] * 4 * sizeof(unsigned long), GFP_KERNEL
);
4515 /* Too bad, we are really out */
4517 mutex_lock(&cache_chain_mutex
);
4520 *(unsigned long *)m
->private = n
[0] * 2;
4522 mutex_lock(&cache_chain_mutex
);
4523 /* Now make sure this entry will be retried */
4527 for (i
= 0; i
< n
[1]; i
++) {
4528 seq_printf(m
, "%s: %lu ", name
, n
[2*i
+3]);
4529 show_symbol(m
, n
[2*i
+2]);
4536 const struct seq_operations slabstats_op
= {
4537 .start
= leaks_start
,
4546 * ksize - get the actual amount of memory allocated for a given object
4547 * @objp: Pointer to the object
4549 * kmalloc may internally round up allocations and return more memory
4550 * than requested. ksize() can be used to determine the actual amount of
4551 * memory allocated. The caller may use this additional memory, even though
4552 * a smaller amount of memory was initially specified with the kmalloc call.
4553 * The caller must guarantee that objp points to a valid object previously
4554 * allocated with either kmalloc() or kmem_cache_alloc(). The object
4555 * must not be freed during the duration of the call.
4557 size_t ksize(const void *objp
)
4559 if (unlikely(objp
== NULL
))
4562 return obj_size(virt_to_cache(objp
));