?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mm: offset align in alloc_bootmem()
[linux-2.6/x86.git] / include / linux / ide.h
blobf20410dd4482b90db602a786776a2575255f6ec8
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4 * linux/include/linux/ide.h
5 *
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/hdreg.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #ifdef CONFIG_BLK_DEV_IDEACPI
21 #include <acpi/acpi.h>
22 #endif
23 #include <asm/byteorder.h>
24 #include <asm/system.h>
25 #include <asm/io.h>
26 #include <asm/mutex.h>
27
28 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
29 # define SUPPORT_VLB_SYNC 0
30 #else
31 # define SUPPORT_VLB_SYNC 1
32 #endif
33
34 /*
35 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
36 * number.
37 */
38
39 #define IDE_NO_IRQ (-1)
40
41 typedef unsigned char byte; /* used everywhere */
42
43 /*
44 * Probably not wise to fiddle with these
45 */
46 #define ERROR_MAX 8 /* Max read/write errors per sector */
47 #define ERROR_RESET 3 /* Reset controller every 4th retry */
48 #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
49
50 /*
51 * Tune flags
52 */
53 #define IDE_TUNE_NOAUTO 2
54 #define IDE_TUNE_AUTO 1
55 #define IDE_TUNE_DEFAULT 0
56
57 /*
58 * state flags
59 */
60
61 #define DMA_PIO_RETRY 1 /* retrying in PIO */
62
63 #define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
64 #define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
65
66 /*
67 * Definitions for accessing IDE controller registers
68 */
69 #define IDE_NR_PORTS (10)
70
71 #define IDE_DATA_OFFSET (0)
72 #define IDE_ERROR_OFFSET (1)
73 #define IDE_NSECTOR_OFFSET (2)
74 #define IDE_SECTOR_OFFSET (3)
75 #define IDE_LCYL_OFFSET (4)
76 #define IDE_HCYL_OFFSET (5)
77 #define IDE_SELECT_OFFSET (6)
78 #define IDE_STATUS_OFFSET (7)
79 #define IDE_CONTROL_OFFSET (8)
80 #define IDE_IRQ_OFFSET (9)
81
82 #define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
83 #define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
84 #define IDE_ALTSTATUS_OFFSET IDE_CONTROL_OFFSET
85 #define IDE_IREASON_OFFSET IDE_NSECTOR_OFFSET
86 #define IDE_BCOUNTL_OFFSET IDE_LCYL_OFFSET
87 #define IDE_BCOUNTH_OFFSET IDE_HCYL_OFFSET
88
89 #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
90 #define BAD_R_STAT (BUSY_STAT | ERR_STAT)
91 #define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
92 #define BAD_STAT (BAD_R_STAT | DRQ_STAT)
93 #define DRIVE_READY (READY_STAT | SEEK_STAT)
94
95 #define BAD_CRC (ABRT_ERR | ICRC_ERR)
96
97 #define SATA_NR_PORTS (3) /* 16 possible ?? */
98
99 #define SATA_STATUS_OFFSET (0)
100 #define SATA_ERROR_OFFSET (1)
101 #define SATA_CONTROL_OFFSET (2)
102
103 /*
104 * Our Physical Region Descriptor (PRD) table should be large enough
105 * to handle the biggest I/O request we are likely to see. Since requests
106 * can have no more than 256 sectors, and since the typical blocksize is
107 * two or more sectors, we could get by with a limit of 128 entries here for
108 * the usual worst case. Most requests seem to include some contiguous blocks,
109 * further reducing the number of table entries required.
110 *
111 * The driver reverts to PIO mode for individual requests that exceed
112 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
113 * 100% of all crazy scenarios here is not necessary.
114 *
115 * As it turns out though, we must allocate a full 4KB page for this,
116 * so the two PRD tables (ide0 & ide1) will each get half of that,
117 * allowing each to have about 256 entries (8 bytes each) from this.
118 */
119 #define PRD_BYTES 8
120 #define PRD_ENTRIES 256
121
122 /*
123 * Some more useful definitions
124 */
125 #define PARTN_BITS 6 /* number of minor dev bits for partitions */
126 #define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
127 #define SECTOR_SIZE 512
128 #define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
129 #define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
130
131 /*
132 * Timeouts for various operations:
133 */
134 #define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
135 #define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
136 #define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
137 #define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
138 #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
139 #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
140
141 /*
142 * Check for an interrupt and acknowledge the interrupt status
143 */
144 struct hwif_s;
145 typedef int (ide_ack_intr_t)(struct hwif_s *);
146
147 /*
148 * hwif_chipset_t is used to keep track of the specific hardware
149 * chipset used by each IDE interface, if known.
150 */
151 enum { ide_unknown, ide_generic, ide_pci,
152 ide_cmd640, ide_dtc2278, ide_ali14xx,
153 ide_qd65xx, ide_umc8672, ide_ht6560b,
154 ide_rz1000, ide_trm290,
155 ide_cmd646, ide_cy82c693, ide_4drives,
156 ide_pmac, ide_etrax100, ide_acorn,
157 ide_au1xxx, ide_palm3710
158 };
159
160 typedef u8 hwif_chipset_t;
161
162 /*
163 * Structure to hold all information about the location of this port
164 */
165 typedef struct hw_regs_s {
166 unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
167 int irq; /* our irq number */
168 ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
169 hwif_chipset_t chipset;
170 struct device *dev;
171 } hw_regs_t;
172
173 void ide_init_port_data(struct hwif_s *, unsigned int);
174 void ide_init_port_hw(struct hwif_s *, hw_regs_t *);
175
176 static inline void ide_std_init_ports(hw_regs_t *hw,
177 unsigned long io_addr,
178 unsigned long ctl_addr)
179 {
180 unsigned int i;
181
182 for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
183 hw->io_ports[i] = io_addr++;
184
185 hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
186 }
187
188 #include <asm/ide.h>
189
190 #if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
191 #undef MAX_HWIFS
192 #define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
193 #endif
194
195 /* Currently only m68k, apus and m8xx need it */
196 #ifndef IDE_ARCH_ACK_INTR
197 # define ide_ack_intr(hwif) (1)
198 #endif
199
200 /* Currently only Atari needs it */
201 #ifndef IDE_ARCH_LOCK
202 # define ide_release_lock() do {} while (0)
203 # define ide_get_lock(hdlr, data) do {} while (0)
204 #endif /* IDE_ARCH_LOCK */
205
206 /*
207 * Now for the data we need to maintain per-drive: ide_drive_t
208 */
209
210 #define ide_scsi 0x21
211 #define ide_disk 0x20
212 #define ide_optical 0x7
213 #define ide_cdrom 0x5
214 #define ide_tape 0x1
215 #define ide_floppy 0x0
216
217 /*
218 * Special Driver Flags
219 *
220 * set_geometry : respecify drive geometry
221 * recalibrate : seek to cyl 0
222 * set_multmode : set multmode count
223 * set_tune : tune interface for drive
224 * serviced : service command
225 * reserved : unused
226 */
227 typedef union {
228 unsigned all : 8;
229 struct {
230 unsigned set_geometry : 1;
231 unsigned recalibrate : 1;
232 unsigned set_multmode : 1;
233 unsigned set_tune : 1;
234 unsigned serviced : 1;
235 unsigned reserved : 3;
236 } b;
237 } special_t;
238
239 /*
240 * ATA-IDE Select Register, aka Device-Head
241 *
242 * head : always zeros here
243 * unit : drive select number: 0/1
244 * bit5 : always 1
245 * lba : using LBA instead of CHS
246 * bit7 : always 1
247 */
248 typedef union {
249 unsigned all : 8;
250 struct {
251 #if defined(__LITTLE_ENDIAN_BITFIELD)
252 unsigned head : 4;
253 unsigned unit : 1;
254 unsigned bit5 : 1;
255 unsigned lba : 1;
256 unsigned bit7 : 1;
257 #elif defined(__BIG_ENDIAN_BITFIELD)
258 unsigned bit7 : 1;
259 unsigned lba : 1;
260 unsigned bit5 : 1;
261 unsigned unit : 1;
262 unsigned head : 4;
263 #else
264 #error "Please fix <asm/byteorder.h>"
265 #endif
266 } b;
267 } select_t, ata_select_t;
268
269 /*
270 * Status returned from various ide_ functions
271 */
272 typedef enum {
273 ide_stopped, /* no drive operation was started */
274 ide_started, /* a drive operation was started, handler was set */
275 } ide_startstop_t;
276
277 struct ide_driver_s;
278 struct ide_settings_s;
279
280 #ifdef CONFIG_BLK_DEV_IDEACPI
281 struct ide_acpi_drive_link;
282 struct ide_acpi_hwif_link;
283 #endif
284
285 typedef struct ide_drive_s {
286 char name[4]; /* drive name, such as "hda" */
287 char driver_req[10]; /* requests specific driver */
288
289 struct request_queue *queue; /* request queue */
290
291 struct request *rq; /* current request */
292 struct ide_drive_s *next; /* circular list of hwgroup drives */
293 void *driver_data; /* extra driver data */
294 struct hd_driveid *id; /* drive model identification info */
295 #ifdef CONFIG_IDE_PROC_FS
296 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
297 struct ide_settings_s *settings;/* /proc/ide/ drive settings */
298 #endif
299 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
300
301 unsigned long sleep; /* sleep until this time */
302 unsigned long service_start; /* time we started last request */
303 unsigned long service_time; /* service time of last request */
304 unsigned long timeout; /* max time to wait for irq */
305
306 special_t special; /* special action flags */
307 select_t select; /* basic drive/head select reg value */
308
309 u8 keep_settings; /* restore settings after drive reset */
310 u8 using_dma; /* disk is using dma for read/write */
311 u8 retry_pio; /* retrying dma capable host in pio */
312 u8 state; /* retry state */
313 u8 waiting_for_dma; /* dma currently in progress */
314 u8 unmask; /* okay to unmask other irqs */
315 u8 noflush; /* don't attempt flushes */
316 u8 dsc_overlap; /* DSC overlap */
317 u8 nice1; /* give potential excess bandwidth */
318
319 unsigned present : 1; /* drive is physically present */
320 unsigned dead : 1; /* device ejected hint */
321 unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
322 unsigned noprobe : 1; /* from: hdx=noprobe */
323 unsigned removable : 1; /* 1 if need to do check_media_change */
324 unsigned attach : 1; /* needed for removable devices */
325 unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
326 unsigned no_unmask : 1; /* disallow setting unmask bit */
327 unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
328 unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
329 unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
330 unsigned nodma : 1; /* disallow DMA */
331 unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
332 unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
333 unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
334 unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
335 unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
336 unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
337 unsigned post_reset : 1;
338 unsigned udma33_warned : 1;
339
340 u8 addressing; /* 0=28-bit, 1=48-bit, 2=48-bit doing 28-bit */
341 u8 quirk_list; /* considered quirky, set for a specific host */
342 u8 init_speed; /* transfer rate set at boot */
343 u8 current_speed; /* current transfer rate set */
344 u8 desired_speed; /* desired transfer rate set */
345 u8 dn; /* now wide spread use */
346 u8 wcache; /* status of write cache */
347 u8 acoustic; /* acoustic management */
348 u8 media; /* disk, cdrom, tape, floppy, ... */
349 u8 ctl; /* "normal" value for Control register */
350 u8 ready_stat; /* min status value for drive ready */
351 u8 mult_count; /* current multiple sector setting */
352 u8 mult_req; /* requested multiple sector setting */
353 u8 tune_req; /* requested drive tuning setting */
354 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
355 u8 bad_wstat; /* used for ignoring WRERR_STAT */
356 u8 nowerr; /* used for ignoring WRERR_STAT */
357 u8 sect0; /* offset of first sector for DM6:DDO */
358 u8 head; /* "real" number of heads */
359 u8 sect; /* "real" sectors per track */
360 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
361 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
362
363 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
364 unsigned int cyl; /* "real" number of cyls */
365 unsigned int drive_data; /* used by set_pio_mode/selectproc */
366 unsigned int failures; /* current failure count */
367 unsigned int max_failures; /* maximum allowed failure count */
368 u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
369
370 u64 capacity64; /* total number of sectors */
371
372 int lun; /* logical unit */
373 int crc_count; /* crc counter to reduce drive speed */
374 #ifdef CONFIG_BLK_DEV_IDEACPI
375 struct ide_acpi_drive_link *acpidata;
376 #endif
377 struct list_head list;
378 struct device gendev;
379 struct completion gendev_rel_comp; /* to deal with device release() */
380 } ide_drive_t;
381
382 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
383
384 #define IDE_CHIPSET_PCI_MASK \
385 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
386 #define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
387
388 struct ide_port_info;
389
390 typedef struct hwif_s {
391 struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
392 struct hwif_s *mate; /* other hwif from same PCI chip */
393 struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
394 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
395
396 char name[6]; /* name of interface, eg. "ide0" */
397
398 /* task file registers for pata and sata */
399 unsigned long io_ports[IDE_NR_PORTS];
400 unsigned long sata_scr[SATA_NR_PORTS];
401
402 ide_drive_t drives[MAX_DRIVES]; /* drive info */
403
404 u8 major; /* our major number */
405 u8 index; /* 0 for ide0; 1 for ide1; ... */
406 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
407 u8 bus_state; /* power state of the IDE bus */
408
409 u32 host_flags;
410
411 u8 pio_mask;
412
413 u8 ultra_mask;
414 u8 mwdma_mask;
415 u8 swdma_mask;
416
417 u8 cbl; /* cable type */
418
419 hwif_chipset_t chipset; /* sub-module for tuning.. */
420
421 struct device *dev;
422
423 const struct ide_port_info *cds; /* chipset device struct */
424
425 ide_ack_intr_t *ack_intr;
426
427 void (*rw_disk)(ide_drive_t *, struct request *);
428
429 #if 0
430 ide_hwif_ops_t *hwifops;
431 #else
432 /* host specific initialization of devices on a port */
433 void (*port_init_devs)(struct hwif_s *);
434 /* routine to program host for PIO mode */
435 void (*set_pio_mode)(ide_drive_t *, const u8);
436 /* routine to program host for DMA mode */
437 void (*set_dma_mode)(ide_drive_t *, const u8);
438 /* tweaks hardware to select drive */
439 void (*selectproc)(ide_drive_t *);
440 /* chipset polling based on hba specifics */
441 int (*reset_poll)(ide_drive_t *);
442 /* chipset specific changes to default for device-hba resets */
443 void (*pre_reset)(ide_drive_t *);
444 /* routine to reset controller after a disk reset */
445 void (*resetproc)(ide_drive_t *);
446 /* special host masking for drive selection */
447 void (*maskproc)(ide_drive_t *, int);
448 /* check host's drive quirk list */
449 void (*quirkproc)(ide_drive_t *);
450 #endif
451 u8 (*mdma_filter)(ide_drive_t *);
452 u8 (*udma_filter)(ide_drive_t *);
453
454 u8 (*cable_detect)(struct hwif_s *);
455
456 void (*ata_input_data)(ide_drive_t *, void *, u32);
457 void (*ata_output_data)(ide_drive_t *, void *, u32);
458
459 void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
460 void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
461
462 void (*dma_host_set)(ide_drive_t *, int);
463 int (*dma_setup)(ide_drive_t *);
464 void (*dma_exec_cmd)(ide_drive_t *, u8);
465 void (*dma_start)(ide_drive_t *);
466 int (*ide_dma_end)(ide_drive_t *drive);
467 int (*ide_dma_test_irq)(ide_drive_t *drive);
468 void (*ide_dma_clear_irq)(ide_drive_t *drive);
469 void (*dma_lost_irq)(ide_drive_t *drive);
470 void (*dma_timeout)(ide_drive_t *drive);
471
472 void (*OUTB)(u8 addr, unsigned long port);
473 void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
474 void (*OUTW)(u16 addr, unsigned long port);
475 void (*OUTSW)(unsigned long port, void *addr, u32 count);
476 void (*OUTSL)(unsigned long port, void *addr, u32 count);
477
478 u8 (*INB)(unsigned long port);
479 u16 (*INW)(unsigned long port);
480 void (*INSW)(unsigned long port, void *addr, u32 count);
481 void (*INSL)(unsigned long port, void *addr, u32 count);
482
483 /* dma physical region descriptor table (cpu view) */
484 unsigned int *dmatable_cpu;
485 /* dma physical region descriptor table (dma view) */
486 dma_addr_t dmatable_dma;
487 /* Scatter-gather list used to build the above */
488 struct scatterlist *sg_table;
489 int sg_max_nents; /* Maximum number of entries in it */
490 int sg_nents; /* Current number of entries in it */
491 int sg_dma_direction; /* dma transfer direction */
492
493 /* data phase of the active command (currently only valid for PIO/DMA) */
494 int data_phase;
495
496 unsigned int nsect;
497 unsigned int nleft;
498 struct scatterlist *cursg;
499 unsigned int cursg_ofs;
500
501 int rqsize; /* max sectors per request */
502 int irq; /* our irq number */
503
504 unsigned long dma_base; /* base addr for dma ports */
505 unsigned long dma_command; /* dma command register */
506 unsigned long dma_vendor1; /* dma vendor 1 register */
507 unsigned long dma_status; /* dma status register */
508 unsigned long dma_vendor3; /* dma vendor 3 register */
509 unsigned long dma_prdtable; /* actual prd table address */
510
511 unsigned long config_data; /* for use by chipset-specific code */
512 unsigned long select_data; /* for use by chipset-specific code */
513
514 unsigned long extra_base; /* extra addr for dma ports */
515 unsigned extra_ports; /* number of extra dma ports */
516
517 unsigned noprobe : 1; /* don't probe for this interface */
518 unsigned present : 1; /* this interface exists */
519 unsigned serialized : 1; /* serialized all channel operation */
520 unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
521 unsigned reset : 1; /* reset after probe */
522 unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
523 unsigned mmio : 1; /* host uses MMIO */
524
525 struct device gendev;
526 struct device *portdev;
527
528 struct completion gendev_rel_comp; /* To deal with device release() */
529
530 void *hwif_data; /* extra hwif data */
531
532 unsigned dma;
533
534 #ifdef CONFIG_BLK_DEV_IDEACPI
535 struct ide_acpi_hwif_link *acpidata;
536 #endif
537 } ____cacheline_internodealigned_in_smp ide_hwif_t;
538
539 /*
540 * internal ide interrupt handler type
541 */
542 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
543 typedef int (ide_expiry_t)(ide_drive_t *);
544
545 /* used by ide-cd, ide-floppy, etc. */
546 typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
547
548 typedef struct hwgroup_s {
549 /* irq handler, if active */
550 ide_startstop_t (*handler)(ide_drive_t *);
551
552 /* BOOL: protects all fields below */
553 volatile int busy;
554 /* BOOL: wake us up on timer expiry */
555 unsigned int sleeping : 1;
556 /* BOOL: polling active & poll_timeout field valid */
557 unsigned int polling : 1;
558 /* BOOL: in a polling reset situation. Must not trigger another reset yet */
559 unsigned int resetting : 1;
560
561 /* current drive */
562 ide_drive_t *drive;
563 /* ptr to current hwif in linked-list */
564 ide_hwif_t *hwif;
565
566 /* current request */
567 struct request *rq;
568
569 /* failsafe timer */
570 struct timer_list timer;
571 /* timeout value during long polls */
572 unsigned long poll_timeout;
573 /* queried upon timeouts */
574 int (*expiry)(ide_drive_t *);
575
576 int req_gen;
577 int req_gen_timer;
578 } ide_hwgroup_t;
579
580 typedef struct ide_driver_s ide_driver_t;
581
582 extern struct mutex ide_setting_mtx;
583
584 int set_io_32bit(ide_drive_t *, int);
585 int set_pio_mode(ide_drive_t *, int);
586 int set_using_dma(ide_drive_t *, int);
587
588 /* ATAPI packet command flags */
589 enum {
590 /* set when an error is considered normal - no retry (ide-tape) */
591 PC_FLAG_ABORT = (1 << 0),
592 PC_FLAG_SUPPRESS_ERROR = (1 << 1),
593 PC_FLAG_WAIT_FOR_DSC = (1 << 2),
594 PC_FLAG_DMA_OK = (1 << 3),
595 PC_FLAG_DMA_RECOMMENDED = (1 << 4),
596 PC_FLAG_DMA_IN_PROGRESS = (1 << 5),
597 PC_FLAG_DMA_ERROR = (1 << 6),
598 PC_FLAG_WRITING = (1 << 7),
599 /* command timed out */
600 PC_FLAG_TIMEDOUT = (1 << 8),
601 };
602
603 struct ide_atapi_pc {
604 /* actual packet bytes */
605 u8 c[12];
606 /* incremented on each retry */
607 int retries;
608 int error;
609
610 /* bytes to transfer */
611 int req_xfer;
612 /* bytes actually transferred */
613 int xferred;
614
615 /* data buffer */
616 u8 *buf;
617 /* current buffer position */
618 u8 *cur_pos;
619 int buf_size;
620 /* missing/available data on the current buffer */
621 int b_count;
622
623 /* the corresponding request */
624 struct request *rq;
625
626 unsigned long flags;
627
628 /*
629 * those are more or less driver-specific and some of them are subject
630 * to change/removal later.
631 */
632 u8 pc_buf[256];
633 void (*idefloppy_callback) (ide_drive_t *);
634 ide_startstop_t (*idetape_callback) (ide_drive_t *);
635
636 /* idetape only */
637 struct idetape_bh *bh;
638 char *b_data;
639
640 /* idescsi only for now */
641 struct scatterlist *sg;
642 unsigned int sg_cnt;
643
644 struct scsi_cmnd *scsi_cmd;
645 void (*done) (struct scsi_cmnd *);
646
647 unsigned long timeout;
648 };
649
650 #ifdef CONFIG_IDE_PROC_FS
651 /*
652 * configurable drive settings
653 */
654
655 #define TYPE_INT 0
656 #define TYPE_BYTE 1
657 #define TYPE_SHORT 2
658
659 #define SETTING_READ (1 << 0)
660 #define SETTING_WRITE (1 << 1)
661 #define SETTING_RW (SETTING_READ | SETTING_WRITE)
662
663 typedef int (ide_procset_t)(ide_drive_t *, int);
664 typedef struct ide_settings_s {
665 char *name;
666 int rw;
667 int data_type;
668 int min;
669 int max;
670 int mul_factor;
671 int div_factor;
672 void *data;
673 ide_procset_t *set;
674 int auto_remove;
675 struct ide_settings_s *next;
676 } ide_settings_t;
677
678 int ide_add_setting(ide_drive_t *, const char *, int, int, int, int, int, int, void *, ide_procset_t *set);
679
680 /*
681 * /proc/ide interface
682 */
683 typedef struct {
684 const char *name;
685 mode_t mode;
686 read_proc_t *read_proc;
687 write_proc_t *write_proc;
688 } ide_proc_entry_t;
689
690 void proc_ide_create(void);
691 void proc_ide_destroy(void);
692 void ide_proc_register_port(ide_hwif_t *);
693 void ide_proc_port_register_devices(ide_hwif_t *);
694 void ide_proc_unregister_device(ide_drive_t *);
695 void ide_proc_unregister_port(ide_hwif_t *);
696 void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
697 void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
698
699 void ide_add_generic_settings(ide_drive_t *);
700
701 read_proc_t proc_ide_read_capacity;
702 read_proc_t proc_ide_read_geometry;
703
704 #ifdef CONFIG_BLK_DEV_IDEPCI
705 void ide_pci_create_host_proc(const char *, get_info_t *);
706 #endif
707
708 /*
709 * Standard exit stuff:
710 */
711 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
712 { \
713 len -= off; \
714 if (len < count) { \
715 *eof = 1; \
716 if (len <= 0) \
717 return 0; \
718 } else \
719 len = count; \
720 *start = page + off; \
721 return len; \
722 }
723 #else
724 static inline void proc_ide_create(void) { ; }
725 static inline void proc_ide_destroy(void) { ; }
726 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
727 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
728 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
729 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
730 static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
731 static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
732 static inline void ide_add_generic_settings(ide_drive_t *drive) { ; }
733 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
734 #endif
735
736 /*
737 * Power Management step value (rq->pm->pm_step).
738 *
739 * The step value starts at 0 (ide_pm_state_start_suspend) for a
740 * suspend operation or 1000 (ide_pm_state_start_resume) for a
741 * resume operation.
742 *
743 * For each step, the core calls the subdriver start_power_step() first.
744 * This can return:
745 * - ide_stopped : In this case, the core calls us back again unless
746 * step have been set to ide_power_state_completed.
747 * - ide_started : In this case, the channel is left busy until an
748 * async event (interrupt) occurs.
749 * Typically, start_power_step() will issue a taskfile request with
750 * do_rw_taskfile().
751 *
752 * Upon reception of the interrupt, the core will call complete_power_step()
753 * with the error code if any. This routine should update the step value
754 * and return. It should not start a new request. The core will call
755 * start_power_step for the new step value, unless step have been set to
756 * ide_power_state_completed.
757 *
758 * Subdrivers are expected to define their own additional power
759 * steps from 1..999 for suspend and from 1001..1999 for resume,
760 * other values are reserved for future use.
761 */
762
763 enum {
764 ide_pm_state_completed = -1,
765 ide_pm_state_start_suspend = 0,
766 ide_pm_state_start_resume = 1000,
767 };
768
769 /*
770 * Subdrivers support.
771 *
772 * The gendriver.owner field should be set to the module owner of this driver.
773 * The gendriver.name field should be set to the name of this driver
774 */
775 struct ide_driver_s {
776 const char *version;
777 u8 media;
778 unsigned supports_dsc_overlap : 1;
779 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
780 int (*end_request)(ide_drive_t *, int, int);
781 ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
782 ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
783 struct device_driver gen_driver;
784 int (*probe)(ide_drive_t *);
785 void (*remove)(ide_drive_t *);
786 void (*resume)(ide_drive_t *);
787 void (*shutdown)(ide_drive_t *);
788 #ifdef CONFIG_IDE_PROC_FS
789 ide_proc_entry_t *proc;
790 #endif
791 };
792
793 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
794
795 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
796
797 /*
798 * ide_hwifs[] is the master data structure used to keep track
799 * of just about everything in ide.c. Whenever possible, routines
800 * should be using pointers to a drive (ide_drive_t *) or
801 * pointers to a hwif (ide_hwif_t *), rather than indexing this
802 * structure directly (the allocation/layout may change!).
803 *
804 */
805 #ifndef _IDE_C
806 extern ide_hwif_t ide_hwifs[]; /* master data repository */
807 #endif
808 extern int noautodma;
809
810 ide_hwif_t *ide_find_port_slot(const struct ide_port_info *);
811
812 static inline ide_hwif_t *ide_find_port(void)
813 {
814 return ide_find_port_slot(NULL);
815 }
816
817 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
818 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
819 int uptodate, int nr_sectors);
820
821 extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
822
823 void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
824 ide_expiry_t *);
825
826 ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
827
828 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
829
830 ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
831
832 extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
833
834 extern void ide_fix_driveid(struct hd_driveid *);
835
836 extern void ide_fixstring(u8 *, const int, const int);
837
838 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
839
840 extern ide_startstop_t ide_do_reset (ide_drive_t *);
841
842 extern void ide_init_drive_cmd (struct request *rq);
843
844 /*
845 * "action" parameter type for ide_do_drive_cmd() below.
846 */
847 typedef enum {
848 ide_wait, /* insert rq at end of list, and wait for it */
849 ide_preempt, /* insert rq in front of current request */
850 ide_head_wait, /* insert rq in front of current request and wait for it */
851 ide_end /* insert rq at end of list, but don't wait for it */
852 } ide_action_t;
853
854 extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
855
856 extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
857
858 enum {
859 IDE_TFLAG_LBA48 = (1 << 0),
860 IDE_TFLAG_NO_SELECT_MASK = (1 << 1),
861 IDE_TFLAG_FLAGGED = (1 << 2),
862 IDE_TFLAG_OUT_DATA = (1 << 3),
863 IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4),
864 IDE_TFLAG_OUT_HOB_NSECT = (1 << 5),
865 IDE_TFLAG_OUT_HOB_LBAL = (1 << 6),
866 IDE_TFLAG_OUT_HOB_LBAM = (1 << 7),
867 IDE_TFLAG_OUT_HOB_LBAH = (1 << 8),
868 IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE |
869 IDE_TFLAG_OUT_HOB_NSECT |
870 IDE_TFLAG_OUT_HOB_LBAL |
871 IDE_TFLAG_OUT_HOB_LBAM |
872 IDE_TFLAG_OUT_HOB_LBAH,
873 IDE_TFLAG_OUT_FEATURE = (1 << 9),
874 IDE_TFLAG_OUT_NSECT = (1 << 10),
875 IDE_TFLAG_OUT_LBAL = (1 << 11),
876 IDE_TFLAG_OUT_LBAM = (1 << 12),
877 IDE_TFLAG_OUT_LBAH = (1 << 13),
878 IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE |
879 IDE_TFLAG_OUT_NSECT |
880 IDE_TFLAG_OUT_LBAL |
881 IDE_TFLAG_OUT_LBAM |
882 IDE_TFLAG_OUT_LBAH,
883 IDE_TFLAG_OUT_DEVICE = (1 << 14),
884 IDE_TFLAG_WRITE = (1 << 15),
885 IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16),
886 IDE_TFLAG_IN_DATA = (1 << 17),
887 IDE_TFLAG_CUSTOM_HANDLER = (1 << 18),
888 IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19),
889 IDE_TFLAG_IN_HOB_FEATURE = (1 << 20),
890 IDE_TFLAG_IN_HOB_NSECT = (1 << 21),
891 IDE_TFLAG_IN_HOB_LBAL = (1 << 22),
892 IDE_TFLAG_IN_HOB_LBAM = (1 << 23),
893 IDE_TFLAG_IN_HOB_LBAH = (1 << 24),
894 IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
895 IDE_TFLAG_IN_HOB_LBAM |
896 IDE_TFLAG_IN_HOB_LBAH,
897 IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE |
898 IDE_TFLAG_IN_HOB_NSECT |
899 IDE_TFLAG_IN_HOB_LBA,
900 IDE_TFLAG_IN_NSECT = (1 << 25),
901 IDE_TFLAG_IN_LBAL = (1 << 26),
902 IDE_TFLAG_IN_LBAM = (1 << 27),
903 IDE_TFLAG_IN_LBAH = (1 << 28),
904 IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL |
905 IDE_TFLAG_IN_LBAM |
906 IDE_TFLAG_IN_LBAH,
907 IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT |
908 IDE_TFLAG_IN_LBA,
909 IDE_TFLAG_IN_DEVICE = (1 << 29),
910 IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB |
911 IDE_TFLAG_IN_HOB,
912 IDE_TFLAG_TF = IDE_TFLAG_OUT_TF |
913 IDE_TFLAG_IN_TF,
914 IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE |
915 IDE_TFLAG_IN_DEVICE,
916 /* force 16-bit I/O operations */
917 IDE_TFLAG_IO_16BIT = (1 << 30),
918 /* ide_task_t was allocated using kmalloc() */
919 IDE_TFLAG_DYN = (1 << 31),
920 };
921
922 struct ide_taskfile {
923 u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
924
925 u8 hob_feature; /* 1-5: additional data to support LBA48 */
926 u8 hob_nsect;
927 u8 hob_lbal;
928 u8 hob_lbam;
929 u8 hob_lbah;
930
931 u8 data; /* 6: low data byte (for TASKFILE IOCTL) */
932
933 union { /*  7: */
934 u8 error; /* read: error */
935 u8 feature; /* write: feature */
936 };
937
938 u8 nsect; /* 8: number of sectors */
939 u8 lbal; /* 9: LBA low */
940 u8 lbam; /* 10: LBA mid */
941 u8 lbah; /* 11: LBA high */
942
943 u8 device; /* 12: device select */
944
945 union { /* 13: */
946 u8 status; /*  read: status  */
947 u8 command; /* write: command */
948 };
949 };
950
951 typedef struct ide_task_s {
952 union {
953 struct ide_taskfile tf;
954 u8 tf_array[14];
955 };
956 u32 tf_flags;
957 int data_phase;
958 struct request *rq; /* copy of request */
959 void *special; /* valid_t generally */
960 } ide_task_t;
961
962 void ide_tf_load(ide_drive_t *, ide_task_t *);
963 void ide_tf_read(ide_drive_t *, ide_task_t *);
964
965 extern void SELECT_DRIVE(ide_drive_t *);
966 extern void SELECT_MASK(ide_drive_t *, int);
967
968 extern int drive_is_ready(ide_drive_t *);
969
970 void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
971
972 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
973
974 void task_end_request(ide_drive_t *, struct request *, u8);
975
976 int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
977 int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
978
979 int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
980 int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
981 int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
982
983 extern int system_bus_clock(void);
984
985 extern int ide_driveid_update(ide_drive_t *);
986 extern int ide_config_drive_speed(ide_drive_t *, u8);
987 extern u8 eighty_ninty_three (ide_drive_t *);
988 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
989
990 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
991
992 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
993
994 extern int ide_spin_wait_hwgroup(ide_drive_t *);
995 extern void ide_timer_expiry(unsigned long);
996 extern irqreturn_t ide_intr(int irq, void *dev_id);
997 extern void do_ide_request(struct request_queue *);
998
999 void ide_init_disk(struct gendisk *, ide_drive_t *);
1000
1001 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1002 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1003 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1004 #else
1005 #define ide_pci_register_driver(d) pci_register_driver(d)
1006 #endif
1007
1008 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
1009 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1010
1011 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1012 void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1013 #else
1014 static inline void ide_hwif_setup_dma(ide_hwif_t *hwif,
1015 const struct ide_port_info *d) { }
1016 #endif
1017
1018 extern void default_hwif_iops(ide_hwif_t *);
1019 extern void default_hwif_mmiops(ide_hwif_t *);
1020 extern void default_hwif_transport(ide_hwif_t *);
1021
1022 typedef struct ide_pci_enablebit_s {
1023 u8 reg; /* byte pci reg holding the enable-bit */
1024 u8 mask; /* mask to isolate the enable-bit */
1025 u8 val; /* value of masked reg when "enabled" */
1026 } ide_pci_enablebit_t;
1027
1028 enum {
1029 /* Uses ISA control ports not PCI ones. */
1030 IDE_HFLAG_ISA_PORTS = (1 << 0),
1031 /* single port device */
1032 IDE_HFLAG_SINGLE = (1 << 1),
1033 /* don't use legacy PIO blacklist */
1034 IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
1035 /* set for the second port of QD65xx */
1036 IDE_HFLAG_QD_2ND_PORT = (1 << 3),
1037 /* use PIO8/9 for prefetch off/on */
1038 IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
1039 /* use PIO6/7 for fast-devsel off/on */
1040 IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
1041 /* use 100-102 and 200-202 PIO values to set DMA modes */
1042 IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
1043 /*
1044 * keep DMA setting when programming PIO mode, may be used only
1045 * for hosts which have separate PIO and DMA timings (ie. PMAC)
1046 */
1047 IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1048 /* program host for the transfer mode after programming device */
1049 IDE_HFLAG_POST_SET_MODE = (1 << 8),
1050 /* don't program host/device for the transfer mode ("smart" hosts) */
1051 IDE_HFLAG_NO_SET_MODE = (1 << 9),
1052 /* trust BIOS for programming chipset/device for DMA */
1053 IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
1054 /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */
1055 IDE_HFLAG_VDMA = (1 << 11),
1056 /* ATAPI DMA is unsupported */
1057 IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
1058 /* set if host is a "non-bootable" controller */
1059 IDE_HFLAG_NON_BOOTABLE = (1 << 13),
1060 /* host doesn't support DMA */
1061 IDE_HFLAG_NO_DMA = (1 << 14),
1062 /* check if host is PCI IDE device before allowing DMA */
1063 IDE_HFLAG_NO_AUTODMA = (1 << 15),
1064 /* don't autotune PIO */
1065 IDE_HFLAG_NO_AUTOTUNE = (1 << 16),
1066 /* host is CS5510/CS5520 */
1067 IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA,
1068 /* no LBA48 */
1069 IDE_HFLAG_NO_LBA48 = (1 << 17),
1070 /* no LBA48 DMA */
1071 IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
1072 /* data FIFO is cleared by an error */
1073 IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
1074 /* serialize ports */
1075 IDE_HFLAG_SERIALIZE = (1 << 20),
1076 /* use legacy IRQs */
1077 IDE_HFLAG_LEGACY_IRQS = (1 << 21),
1078 /* force use of legacy IRQs */
1079 IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
1080 /* limit LBA48 requests to 256 sectors */
1081 IDE_HFLAG_RQSIZE_256 = (1 << 23),
1082 /* use 32-bit I/O ops */
1083 IDE_HFLAG_IO_32BIT = (1 << 24),
1084 /* unmask IRQs */
1085 IDE_HFLAG_UNMASK_IRQS = (1 << 25),
1086 IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26),
1087 /* force host out of "simplex" mode */
1088 IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
1089 /* DSC overlap is unsupported */
1090 IDE_HFLAG_NO_DSC = (1 << 29),
1091 /* never use 32-bit I/O ops */
1092 IDE_HFLAG_NO_IO_32BIT = (1 << 30),
1093 /* never unmask IRQs */
1094 IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
1095 };
1096
1097 #ifdef CONFIG_BLK_DEV_OFFBOARD
1098 # define IDE_HFLAG_OFF_BOARD 0
1099 #else
1100 # define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
1101 #endif
1102
1103 struct ide_port_info {
1104 char *name;
1105 unsigned int (*init_chipset)(struct pci_dev *, const char *);
1106 void (*init_iops)(ide_hwif_t *);
1107 void (*init_hwif)(ide_hwif_t *);
1108 void (*init_dma)(ide_hwif_t *, unsigned long);
1109 ide_pci_enablebit_t enablebits[2];
1110 hwif_chipset_t chipset;
1111 u8 extra;
1112 u32 host_flags;
1113 u8 pio_mask;
1114 u8 swdma_mask;
1115 u8 mwdma_mask;
1116 u8 udma_mask;
1117 };
1118
1119 int ide_setup_pci_device(struct pci_dev *, const struct ide_port_info *);
1120 int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, const struct ide_port_info *);
1121
1122 void ide_map_sg(ide_drive_t *, struct request *);
1123 void ide_init_sg_cmd(ide_drive_t *, struct request *);
1124
1125 #define BAD_DMA_DRIVE 0
1126 #define GOOD_DMA_DRIVE 1
1127
1128 struct drive_list_entry {
1129 const char *id_model;
1130 const char *id_firmware;
1131 };
1132
1133 int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
1134
1135 #ifdef CONFIG_BLK_DEV_IDEDMA
1136 int __ide_dma_bad_drive(ide_drive_t *);
1137 int ide_id_dma_bug(ide_drive_t *);
1138
1139 u8 ide_find_dma_mode(ide_drive_t *, u8);
1140
1141 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1142 {
1143 return ide_find_dma_mode(drive, XFER_UDMA_6);
1144 }
1145
1146 void ide_dma_off_quietly(ide_drive_t *);
1147 void ide_dma_off(ide_drive_t *);
1148 void ide_dma_on(ide_drive_t *);
1149 int ide_set_dma(ide_drive_t *);
1150 void ide_check_dma_crc(ide_drive_t *);
1151 ide_startstop_t ide_dma_intr(ide_drive_t *);
1152
1153 int ide_build_sglist(ide_drive_t *, struct request *);
1154 void ide_destroy_dmatable(ide_drive_t *);
1155
1156 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1157 extern int ide_build_dmatable(ide_drive_t *, struct request *);
1158 extern int ide_release_dma(ide_hwif_t *);
1159 extern void ide_setup_dma(ide_hwif_t *, unsigned long);
1160
1161 void ide_dma_host_set(ide_drive_t *, int);
1162 extern int ide_dma_setup(ide_drive_t *);
1163 extern void ide_dma_start(ide_drive_t *);
1164 extern int __ide_dma_end(ide_drive_t *);
1165 extern void ide_dma_lost_irq(ide_drive_t *);
1166 extern void ide_dma_timeout(ide_drive_t *);
1167 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1168
1169 #else
1170 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1171 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1172 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1173 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1174 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1175 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1176 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1177 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1178 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1179 #endif /* CONFIG_BLK_DEV_IDEDMA */
1180
1181 #ifndef CONFIG_BLK_DEV_IDEDMA_SFF
1182 static inline void ide_release_dma(ide_hwif_t *drive) {;}
1183 #endif
1184
1185 #ifdef CONFIG_BLK_DEV_IDEACPI
1186 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1187 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1188 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1189 extern void ide_acpi_init(ide_hwif_t *hwif);
1190 void ide_acpi_port_init_devices(ide_hwif_t *);
1191 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1192 #else
1193 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1194 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1195 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1196 static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
1197 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1198 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1199 #endif
1200
1201 void ide_remove_port_from_hwgroup(ide_hwif_t *);
1202 extern int ide_hwif_request_regions(ide_hwif_t *hwif);
1203 extern void ide_hwif_release_regions(ide_hwif_t* hwif);
1204 void ide_unregister(unsigned int);
1205
1206 void ide_register_region(struct gendisk *);
1207 void ide_unregister_region(struct gendisk *);
1208
1209 void ide_undecoded_slave(ide_drive_t *);
1210
1211 int ide_device_add_all(u8 *idx, const struct ide_port_info *);
1212 int ide_device_add(u8 idx[4], const struct ide_port_info *);
1213 void ide_port_unregister_devices(ide_hwif_t *);
1214 void ide_port_scan(ide_hwif_t *);
1215
1216 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1217 {
1218 return hwif->hwif_data;
1219 }
1220
1221 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1222 {
1223 hwif->hwif_data = data;
1224 }
1225
1226 const char *ide_xfer_verbose(u8 mode);
1227 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1228 extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1229
1230 static inline int ide_dev_has_iordy(struct hd_driveid *id)
1231 {
1232 return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
1233 }
1234
1235 static inline int ide_dev_is_sata(struct hd_driveid *id)
1236 {
1237 /*
1238 * See if word 93 is 0 AND drive is at least ATA-5 compatible
1239 * verifying that word 80 by casting it to a signed type --
1240 * this trick allows us to filter out the reserved values of
1241 * 0x0000 and 0xffff along with the earlier ATA revisions...
1242 */
1243 if (id->hw_config == 0 && (short)id->major_rev_num >= 0x0020)
1244 return 1;
1245 return 0;
1246 }
1247
1248 u64 ide_get_lba_addr(struct ide_taskfile *, int);
1249 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1250
1251 typedef struct ide_pio_timings_s {
1252 int setup_time; /* Address setup (ns) minimum */
1253 int active_time; /* Active pulse (ns) minimum */
1254 int cycle_time; /* Cycle time (ns) minimum = */
1255 /* active + recovery (+ setup for some chips) */
1256 } ide_pio_timings_t;
1257
1258 unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
1259 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1260 extern const ide_pio_timings_t ide_pio_timings[6];
1261
1262 int ide_set_pio_mode(ide_drive_t *, u8);
1263 int ide_set_dma_mode(ide_drive_t *, u8);
1264
1265 void ide_set_pio(ide_drive_t *, u8);
1266
1267 static inline void ide_set_max_pio(ide_drive_t *drive)
1268 {
1269 ide_set_pio(drive, 255);
1270 }
1271
1272 extern spinlock_t ide_lock;
1273 extern struct mutex ide_cfg_mtx;
1274 /*
1275 * Structure locking:
1276 *
1277 * ide_cfg_mtx and ide_lock together protect changes to
1278 * ide_hwif_t->{next,hwgroup}
1279 * ide_drive_t->next
1280 *
1281 * ide_hwgroup_t->busy: ide_lock
1282 * ide_hwgroup_t->hwif: ide_lock
1283 * ide_hwif_t->mate: constant, no locking
1284 * ide_drive_t->hwif: constant, no locking
1285 */
1286
1287 #define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
1288
1289 extern struct bus_type ide_bus_type;
1290 extern struct class *ide_port_class;
1291
1292 /* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1293 #define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1294
1295 /* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1296 #define ide_id_has_flush_cache_ext(id) \
1297 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1298
1299 static inline void ide_dump_identify(u8 *id)
1300 {
1301 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1302 }
1303
1304 static inline int hwif_to_node(ide_hwif_t *hwif)
1305 {
1306 struct pci_dev *dev = to_pci_dev(hwif->dev);
1307 return hwif->dev ? pcibus_to_node(dev->bus) : -1;
1308 }
1309
1310 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
1311 {
1312 ide_hwif_t *hwif = HWIF(drive);
1313
1314 return &hwif->drives[(drive->dn ^ 1) & 1];
1315 }
1316
1317 static inline void ide_set_irq(ide_drive_t *drive, int on)
1318 {
1319 ide_hwif_t *hwif = drive->hwif;
1320
1321 hwif->OUTB(drive->ctl | (on ? 0 : 2),
1322 hwif->io_ports[IDE_CONTROL_OFFSET]);
1323 }
1324
1325 static inline u8 ide_read_status(ide_drive_t *drive)
1326 {
1327 ide_hwif_t *hwif = drive->hwif;
1328
1329 return hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
1330 }
1331
1332 static inline u8 ide_read_altstatus(ide_drive_t *drive)
1333 {
1334 ide_hwif_t *hwif = drive->hwif;
1335
1336 return hwif->INB(hwif->io_ports[IDE_CONTROL_OFFSET]);
1337 }
1338
1339 static inline u8 ide_read_error(ide_drive_t *drive)
1340 {
1341 ide_hwif_t *hwif = drive->hwif;
1342
1343 return hwif->INB(hwif->io_ports[IDE_ERROR_OFFSET]);
1344 }
1345
1346 /*
1347 * Too bad. The drive wants to send us data which we are not ready to accept.
1348 * Just throw it away.
1349 */
1350 static inline void ide_atapi_discard_data(ide_drive_t *drive, unsigned bcount)
1351 {
1352 ide_hwif_t *hwif = drive->hwif;
1353
1354 /* FIXME: use ->atapi_input_bytes */
1355 while (bcount--)
1356 (void)hwif->INB(hwif->io_ports[IDE_DATA_OFFSET]);
1357 }
1358
1359 static inline void ide_atapi_write_zeros(ide_drive_t *drive, unsigned bcount)
1360 {
1361 ide_hwif_t *hwif = drive->hwif;
1362
1363 /* FIXME: use ->atapi_output_bytes */
1364 while (bcount--)
1365 hwif->OUTB(0, hwif->io_ports[IDE_DATA_OFFSET]);
1366 }
1367
1368 #endif /* _IDE_H */
x86 "subsystem" repository