?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sky2: transmit timeout
[linux-2.6/x86.git] / drivers / net / sky2.c
blobfafa4021bb8ad5cba228b538dc5b50201a46a3ab
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/crc32.h>
26 #include <linux/kernel.h>
27 #include <linux/version.h>
28 #include <linux/module.h>
29 #include <linux/netdevice.h>
30 #include <linux/dma-mapping.h>
31 #include <linux/etherdevice.h>
32 #include <linux/ethtool.h>
33 #include <linux/pci.h>
34 #include <linux/ip.h>
35 #include <linux/tcp.h>
36 #include <linux/in.h>
37 #include <linux/delay.h>
38 #include <linux/workqueue.h>
39 #include <linux/if_vlan.h>
40 #include <linux/prefetch.h>
41 #include <linux/mii.h>
42
43 #include <asm/irq.h>
44
45 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
46 #define SKY2_VLAN_TAG_USED 1
47 #endif
48
49 #include "sky2.h"
50
51 #define DRV_NAME "sky2"
52 #define DRV_VERSION "1.12"
53 #define PFX DRV_NAME " "
54
55 /*
56 * The Yukon II chipset takes 64 bit command blocks (called list elements)
57 * that are organized into three (receive, transmit, status) different rings
58 * similar to Tigon3.
59 */
60
61 #define RX_LE_SIZE 1024
62 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
63 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
64 #define RX_DEF_PENDING RX_MAX_PENDING
65 #define RX_SKB_ALIGN 8
66 #define RX_BUF_WRITE 16
67
68 #define TX_RING_SIZE 512
69 #define TX_DEF_PENDING (TX_RING_SIZE - 1)
70 #define TX_MIN_PENDING 64
71 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
72
73 #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
74 #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
75 #define TX_WATCHDOG (5 * HZ)
76 #define NAPI_WEIGHT 64
77 #define PHY_RETRIES 1000
78
79 #define RING_NEXT(x,s) (((x)+1) & ((s)-1))
80
81 static const u32 default_msg =
82 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
83 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
84 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
85
86 static int debug = -1; /* defaults above */
87 module_param(debug, int, 0);
88 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
89
90 static int copybreak __read_mostly = 128;
91 module_param(copybreak, int, 0);
92 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
93
94 static int disable_msi = 0;
95 module_param(disable_msi, int, 0);
96 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
97
98 static int idle_timeout = 0;
99 module_param(idle_timeout, int, 0);
100 MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
101
102 static const struct pci_device_id sky2_id_table[] = {
103 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
104 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
105 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
106 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
107 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
108 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
133 { 0 }
134 };
135
136 MODULE_DEVICE_TABLE(pci, sky2_id_table);
137
138 /* Avoid conditionals by using array */
139 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
140 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
141 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
142
143 /* This driver supports yukon2 chipset only */
144 static const char *yukon2_name[] = {
145 "XL", /* 0xb3 */
146 "EC Ultra", /* 0xb4 */
147 "Extreme", /* 0xb5 */
148 "EC", /* 0xb6 */
149 "FE", /* 0xb7 */
150 };
151
152 /* Access to external PHY */
153 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
154 {
155 int i;
156
157 gma_write16(hw, port, GM_SMI_DATA, val);
158 gma_write16(hw, port, GM_SMI_CTRL,
159 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
160
161 for (i = 0; i < PHY_RETRIES; i++) {
162 if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
163 return 0;
164 udelay(1);
165 }
166
167 printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
168 return -ETIMEDOUT;
169 }
170
171 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
172 {
173 int i;
174
175 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
176 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
177
178 for (i = 0; i < PHY_RETRIES; i++) {
179 if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
180 *val = gma_read16(hw, port, GM_SMI_DATA);
181 return 0;
182 }
183
184 udelay(1);
185 }
186
187 return -ETIMEDOUT;
188 }
189
190 static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
191 {
192 u16 v;
193
194 if (__gm_phy_read(hw, port, reg, &v) != 0)
195 printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
196 return v;
197 }
198
199
200 static void sky2_power_on(struct sky2_hw *hw)
201 {
202 /* switch power to VCC (WA for VAUX problem) */
203 sky2_write8(hw, B0_POWER_CTRL,
204 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
205
206 /* disable Core Clock Division, */
207 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
208
209 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
210 /* enable bits are inverted */
211 sky2_write8(hw, B2_Y2_CLK_GATE,
212 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
213 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
214 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
215 else
216 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
217
218 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
219 u32 reg1;
220
221 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
222 reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
223 reg1 &= P_ASPM_CONTROL_MSK;
224 sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
225 sky2_pci_write32(hw, PCI_DEV_REG5, 0);
226 }
227 }
228
229 static void sky2_power_aux(struct sky2_hw *hw)
230 {
231 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
232 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
233 else
234 /* enable bits are inverted */
235 sky2_write8(hw, B2_Y2_CLK_GATE,
236 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
237 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
238 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
239
240 /* switch power to VAUX */
241 if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
242 sky2_write8(hw, B0_POWER_CTRL,
243 (PC_VAUX_ENA | PC_VCC_ENA |
244 PC_VAUX_ON | PC_VCC_OFF));
245 }
246
247 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
248 {
249 u16 reg;
250
251 /* disable all GMAC IRQ's */
252 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
253 /* disable PHY IRQs */
254 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
255
256 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
257 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
258 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
259 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
260
261 reg = gma_read16(hw, port, GM_RX_CTRL);
262 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
263 gma_write16(hw, port, GM_RX_CTRL, reg);
264 }
265
266 /* flow control to advertise bits */
267 static const u16 copper_fc_adv[] = {
268 [FC_NONE] = 0,
269 [FC_TX] = PHY_M_AN_ASP,
270 [FC_RX] = PHY_M_AN_PC,
271 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
272 };
273
274 /* flow control to advertise bits when using 1000BaseX */
275 static const u16 fiber_fc_adv[] = {
276 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
277 [FC_TX] = PHY_M_P_ASYM_MD_X,
278 [FC_RX] = PHY_M_P_SYM_MD_X,
279 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
280 };
281
282 /* flow control to GMA disable bits */
283 static const u16 gm_fc_disable[] = {
284 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
285 [FC_TX] = GM_GPCR_FC_RX_DIS,
286 [FC_RX] = GM_GPCR_FC_TX_DIS,
287 [FC_BOTH] = 0,
288 };
289
290
291 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
292 {
293 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
294 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
295
296 if (sky2->autoneg == AUTONEG_ENABLE
297 && !(hw->chip_id == CHIP_ID_YUKON_XL
298 || hw->chip_id == CHIP_ID_YUKON_EC_U
299 || hw->chip_id == CHIP_ID_YUKON_EX)) {
300 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
301
302 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
303 PHY_M_EC_MAC_S_MSK);
304 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
305
306 if (hw->chip_id == CHIP_ID_YUKON_EC)
307 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
308 else
309 ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3);
310
311 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
312 }
313
314 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
315 if (sky2_is_copper(hw)) {
316 if (hw->chip_id == CHIP_ID_YUKON_FE) {
317 /* enable automatic crossover */
318 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
319 } else {
320 /* disable energy detect */
321 ctrl &= ~PHY_M_PC_EN_DET_MSK;
322
323 /* enable automatic crossover */
324 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
325
326 if (sky2->autoneg == AUTONEG_ENABLE
327 && (hw->chip_id == CHIP_ID_YUKON_XL
328 || hw->chip_id == CHIP_ID_YUKON_EC_U
329 || hw->chip_id == CHIP_ID_YUKON_EX)) {
330 ctrl &= ~PHY_M_PC_DSC_MSK;
331 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
332 }
333 }
334 } else {
335 /* workaround for deviation #4.88 (CRC errors) */
336 /* disable Automatic Crossover */
337
338 ctrl &= ~PHY_M_PC_MDIX_MSK;
339 }
340
341 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
342
343 /* special setup for PHY 88E1112 Fiber */
344 if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) {
345 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
346
347 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
348 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
349 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
350 ctrl &= ~PHY_M_MAC_MD_MSK;
351 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
352 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
353
354 if (hw->pmd_type == 'P') {
355 /* select page 1 to access Fiber registers */
356 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
357
358 /* for SFP-module set SIGDET polarity to low */
359 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
360 ctrl |= PHY_M_FIB_SIGD_POL;
361 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
362 }
363
364 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
365 }
366
367 ctrl = PHY_CT_RESET;
368 ct1000 = 0;
369 adv = PHY_AN_CSMA;
370 reg = 0;
371
372 if (sky2->autoneg == AUTONEG_ENABLE) {
373 if (sky2_is_copper(hw)) {
374 if (sky2->advertising & ADVERTISED_1000baseT_Full)
375 ct1000 |= PHY_M_1000C_AFD;
376 if (sky2->advertising & ADVERTISED_1000baseT_Half)
377 ct1000 |= PHY_M_1000C_AHD;
378 if (sky2->advertising & ADVERTISED_100baseT_Full)
379 adv |= PHY_M_AN_100_FD;
380 if (sky2->advertising & ADVERTISED_100baseT_Half)
381 adv |= PHY_M_AN_100_HD;
382 if (sky2->advertising & ADVERTISED_10baseT_Full)
383 adv |= PHY_M_AN_10_FD;
384 if (sky2->advertising & ADVERTISED_10baseT_Half)
385 adv |= PHY_M_AN_10_HD;
386
387 adv |= copper_fc_adv[sky2->flow_mode];
388 } else { /* special defines for FIBER (88E1040S only) */
389 if (sky2->advertising & ADVERTISED_1000baseT_Full)
390 adv |= PHY_M_AN_1000X_AFD;
391 if (sky2->advertising & ADVERTISED_1000baseT_Half)
392 adv |= PHY_M_AN_1000X_AHD;
393
394 adv |= fiber_fc_adv[sky2->flow_mode];
395 }
396
397 /* Restart Auto-negotiation */
398 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
399 } else {
400 /* forced speed/duplex settings */
401 ct1000 = PHY_M_1000C_MSE;
402
403 /* Disable auto update for duplex flow control and speed */
404 reg |= GM_GPCR_AU_ALL_DIS;
405
406 switch (sky2->speed) {
407 case SPEED_1000:
408 ctrl |= PHY_CT_SP1000;
409 reg |= GM_GPCR_SPEED_1000;
410 break;
411 case SPEED_100:
412 ctrl |= PHY_CT_SP100;
413 reg |= GM_GPCR_SPEED_100;
414 break;
415 }
416
417 if (sky2->duplex == DUPLEX_FULL) {
418 reg |= GM_GPCR_DUP_FULL;
419 ctrl |= PHY_CT_DUP_MD;
420 } else if (sky2->speed < SPEED_1000)
421 sky2->flow_mode = FC_NONE;
422
423
424 reg |= gm_fc_disable[sky2->flow_mode];
425
426 /* Forward pause packets to GMAC? */
427 if (sky2->flow_mode & FC_RX)
428 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
429 else
430 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
431 }
432
433 gma_write16(hw, port, GM_GP_CTRL, reg);
434
435 if (hw->chip_id != CHIP_ID_YUKON_FE)
436 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
437
438 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
439 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
440
441 /* Setup Phy LED's */
442 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
443 ledover = 0;
444
445 switch (hw->chip_id) {
446 case CHIP_ID_YUKON_FE:
447 /* on 88E3082 these bits are at 11..9 (shifted left) */
448 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
449
450 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
451
452 /* delete ACT LED control bits */
453 ctrl &= ~PHY_M_FELP_LED1_MSK;
454 /* change ACT LED control to blink mode */
455 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
456 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
457 break;
458
459 case CHIP_ID_YUKON_XL:
460 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
461
462 /* select page 3 to access LED control register */
463 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
464
465 /* set LED Function Control register */
466 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
467 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
468 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
469 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
470 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
471
472 /* set Polarity Control register */
473 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
474 (PHY_M_POLC_LS1_P_MIX(4) |
475 PHY_M_POLC_IS0_P_MIX(4) |
476 PHY_M_POLC_LOS_CTRL(2) |
477 PHY_M_POLC_INIT_CTRL(2) |
478 PHY_M_POLC_STA1_CTRL(2) |
479 PHY_M_POLC_STA0_CTRL(2)));
480
481 /* restore page register */
482 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
483 break;
484
485 case CHIP_ID_YUKON_EC_U:
486 case CHIP_ID_YUKON_EX:
487 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
488
489 /* select page 3 to access LED control register */
490 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
491
492 /* set LED Function Control register */
493 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
494 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
495 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
496 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
497 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
498
499 /* set Blink Rate in LED Timer Control Register */
500 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
501 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
502 /* restore page register */
503 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
504 break;
505
506 default:
507 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
508 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
509 /* turn off the Rx LED (LED_RX) */
510 ledover &= ~PHY_M_LED_MO_RX;
511 }
512
513 if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
514 /* apply fixes in PHY AFE */
515 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
516 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
517
518 /* increase differential signal amplitude in 10BASE-T */
519 gm_phy_write(hw, port, 0x18, 0xaa99);
520 gm_phy_write(hw, port, 0x17, 0x2011);
521
522 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
523 gm_phy_write(hw, port, 0x18, 0xa204);
524 gm_phy_write(hw, port, 0x17, 0x2002);
525
526 /* set page register to 0 */
527 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
528 } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
529 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
530
531 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
532 /* turn on 100 Mbps LED (LED_LINK100) */
533 ledover |= PHY_M_LED_MO_100;
534 }
535
536 if (ledover)
537 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
538
539 }
540
541 /* Enable phy interrupt on auto-negotiation complete (or link up) */
542 if (sky2->autoneg == AUTONEG_ENABLE)
543 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
544 else
545 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
546 }
547
548 static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
549 {
550 u32 reg1;
551 static const u32 phy_power[]
552 = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
553
554 /* looks like this XL is back asswards .. */
555 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
556 onoff = !onoff;
557
558 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
559 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
560 if (onoff)
561 /* Turn off phy power saving */
562 reg1 &= ~phy_power[port];
563 else
564 reg1 |= phy_power[port];
565
566 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
567 sky2_pci_read32(hw, PCI_DEV_REG1);
568 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
569 udelay(100);
570 }
571
572 /* Force a renegotiation */
573 static void sky2_phy_reinit(struct sky2_port *sky2)
574 {
575 spin_lock_bh(&sky2->phy_lock);
576 sky2_phy_init(sky2->hw, sky2->port);
577 spin_unlock_bh(&sky2->phy_lock);
578 }
579
580 /* Put device in state to listen for Wake On Lan */
581 static void sky2_wol_init(struct sky2_port *sky2)
582 {
583 struct sky2_hw *hw = sky2->hw;
584 unsigned port = sky2->port;
585 enum flow_control save_mode;
586 u16 ctrl;
587 u32 reg1;
588
589 /* Bring hardware out of reset */
590 sky2_write16(hw, B0_CTST, CS_RST_CLR);
591 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
592
593 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
594 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
595
596 /* Force to 10/100
597 * sky2_reset will re-enable on resume
598 */
599 save_mode = sky2->flow_mode;
600 ctrl = sky2->advertising;
601
602 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
603 sky2->flow_mode = FC_NONE;
604 sky2_phy_power(hw, port, 1);
605 sky2_phy_reinit(sky2);
606
607 sky2->flow_mode = save_mode;
608 sky2->advertising = ctrl;
609
610 /* Set GMAC to no flow control and auto update for speed/duplex */
611 gma_write16(hw, port, GM_GP_CTRL,
612 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
613 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
614
615 /* Set WOL address */
616 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
617 sky2->netdev->dev_addr, ETH_ALEN);
618
619 /* Turn on appropriate WOL control bits */
620 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
621 ctrl = 0;
622 if (sky2->wol & WAKE_PHY)
623 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
624 else
625 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
626
627 if (sky2->wol & WAKE_MAGIC)
628 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
629 else
630 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
631
632 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
633 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
634
635 /* Turn on legacy PCI-Express PME mode */
636 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
637 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
638 reg1 |= PCI_Y2_PME_LEGACY;
639 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
640 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
641
642 /* block receiver */
643 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
644
645 }
646
647 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
648 {
649 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
650 u16 reg;
651 int i;
652 const u8 *addr = hw->dev[port]->dev_addr;
653
654 sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
655 sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE);
656
657 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
658
659 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) {
660 /* WA DEV_472 -- looks like crossed wires on port 2 */
661 /* clear GMAC 1 Control reset */
662 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
663 do {
664 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
665 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
666 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
667 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
668 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
669 }
670
671 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
672
673 /* Enable Transmit FIFO Underrun */
674 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
675
676 spin_lock_bh(&sky2->phy_lock);
677 sky2_phy_init(hw, port);
678 spin_unlock_bh(&sky2->phy_lock);
679
680 /* MIB clear */
681 reg = gma_read16(hw, port, GM_PHY_ADDR);
682 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
683
684 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
685 gma_read16(hw, port, i);
686 gma_write16(hw, port, GM_PHY_ADDR, reg);
687
688 /* transmit control */
689 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
690
691 /* receive control reg: unicast + multicast + no FCS */
692 gma_write16(hw, port, GM_RX_CTRL,
693 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
694
695 /* transmit flow control */
696 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
697
698 /* transmit parameter */
699 gma_write16(hw, port, GM_TX_PARAM,
700 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
701 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
702 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
703 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
704
705 /* serial mode register */
706 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
707 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
708
709 if (hw->dev[port]->mtu > ETH_DATA_LEN)
710 reg |= GM_SMOD_JUMBO_ENA;
711
712 gma_write16(hw, port, GM_SERIAL_MODE, reg);
713
714 /* virtual address for data */
715 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
716
717 /* physical address: used for pause frames */
718 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
719
720 /* ignore counter overflows */
721 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
722 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
723 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
724
725 /* Configure Rx MAC FIFO */
726 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
727 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
728 GMF_OPER_ON | GMF_RX_F_FL_ON);
729
730 /* Flush Rx MAC FIFO on any flow control or error */
731 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
732
733 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
734 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
735
736 /* Configure Tx MAC FIFO */
737 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
738 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
739
740 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
741 sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
742 sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
743 if (hw->dev[port]->mtu > ETH_DATA_LEN) {
744 /* set Tx GMAC FIFO Almost Empty Threshold */
745 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180);
746 /* Disable Store & Forward mode for TX */
747 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
748 }
749 }
750
751 }
752
753 /* Assign Ram Buffer allocation to queue */
754 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
755 {
756 u32 end;
757
758 /* convert from K bytes to qwords used for hw register */
759 start *= 1024/8;
760 space *= 1024/8;
761 end = start + space - 1;
762
763 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
764 sky2_write32(hw, RB_ADDR(q, RB_START), start);
765 sky2_write32(hw, RB_ADDR(q, RB_END), end);
766 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
767 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
768
769 if (q == Q_R1 || q == Q_R2) {
770 u32 tp = space - space/4;
771
772 /* On receive queue's set the thresholds
773 * give receiver priority when > 3/4 full
774 * send pause when down to 2K
775 */
776 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
777 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
778
779 tp = space - 2048/8;
780 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
781 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
782 } else {
783 /* Enable store & forward on Tx queue's because
784 * Tx FIFO is only 1K on Yukon
785 */
786 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
787 }
788
789 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
790 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
791 }
792
793 /* Setup Bus Memory Interface */
794 static void sky2_qset(struct sky2_hw *hw, u16 q)
795 {
796 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
797 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
798 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
799 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
800 }
801
802 /* Setup prefetch unit registers. This is the interface between
803 * hardware and driver list elements
804 */
805 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
806 u64 addr, u32 last)
807 {
808 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
809 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
810 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
811 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
812 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
813 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
814
815 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
816 }
817
818 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
819 {
820 struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
821
822 sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
823 le->ctrl = 0;
824 return le;
825 }
826
827 static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
828 struct sky2_tx_le *le)
829 {
830 return sky2->tx_ring + (le - sky2->tx_le);
831 }
832
833 /* Update chip's next pointer */
834 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
835 {
836 q = Y2_QADDR(q, PREF_UNIT_PUT_IDX);
837 wmb();
838 sky2_write16(hw, q, idx);
839 sky2_read16(hw, q);
840 }
841
842
843 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
844 {
845 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
846 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
847 le->ctrl = 0;
848 return le;
849 }
850
851 /* Return high part of DMA address (could be 32 or 64 bit) */
852 static inline u32 high32(dma_addr_t a)
853 {
854 return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0;
855 }
856
857 /* Build description to hardware for one receive segment */
858 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
859 dma_addr_t map, unsigned len)
860 {
861 struct sky2_rx_le *le;
862 u32 hi = high32(map);
863
864 if (sky2->rx_addr64 != hi) {
865 le = sky2_next_rx(sky2);
866 le->addr = cpu_to_le32(hi);
867 le->opcode = OP_ADDR64 | HW_OWNER;
868 sky2->rx_addr64 = high32(map + len);
869 }
870
871 le = sky2_next_rx(sky2);
872 le->addr = cpu_to_le32((u32) map);
873 le->length = cpu_to_le16(len);
874 le->opcode = op | HW_OWNER;
875 }
876
877 /* Build description to hardware for one possibly fragmented skb */
878 static void sky2_rx_submit(struct sky2_port *sky2,
879 const struct rx_ring_info *re)
880 {
881 int i;
882
883 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
884
885 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
886 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
887 }
888
889
890 static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
891 unsigned size)
892 {
893 struct sk_buff *skb = re->skb;
894 int i;
895
896 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
897 pci_unmap_len_set(re, data_size, size);
898
899 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
900 re->frag_addr[i] = pci_map_page(pdev,
901 skb_shinfo(skb)->frags[i].page,
902 skb_shinfo(skb)->frags[i].page_offset,
903 skb_shinfo(skb)->frags[i].size,
904 PCI_DMA_FROMDEVICE);
905 }
906
907 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
908 {
909 struct sk_buff *skb = re->skb;
910 int i;
911
912 pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size),
913 PCI_DMA_FROMDEVICE);
914
915 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
916 pci_unmap_page(pdev, re->frag_addr[i],
917 skb_shinfo(skb)->frags[i].size,
918 PCI_DMA_FROMDEVICE);
919 }
920
921 /* Tell chip where to start receive checksum.
922 * Actually has two checksums, but set both same to avoid possible byte
923 * order problems.
924 */
925 static void rx_set_checksum(struct sky2_port *sky2)
926 {
927 struct sky2_rx_le *le;
928
929 le = sky2_next_rx(sky2);
930 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
931 le->ctrl = 0;
932 le->opcode = OP_TCPSTART | HW_OWNER;
933
934 sky2_write32(sky2->hw,
935 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
936 sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
937
938 }
939
940 /*
941 * The RX Stop command will not work for Yukon-2 if the BMU does not
942 * reach the end of packet and since we can't make sure that we have
943 * incoming data, we must reset the BMU while it is not doing a DMA
944 * transfer. Since it is possible that the RX path is still active,
945 * the RX RAM buffer will be stopped first, so any possible incoming
946 * data will not trigger a DMA. After the RAM buffer is stopped, the
947 * BMU is polled until any DMA in progress is ended and only then it
948 * will be reset.
949 */
950 static void sky2_rx_stop(struct sky2_port *sky2)
951 {
952 struct sky2_hw *hw = sky2->hw;
953 unsigned rxq = rxqaddr[sky2->port];
954 int i;
955
956 /* disable the RAM Buffer receive queue */
957 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
958
959 for (i = 0; i < 0xffff; i++)
960 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
961 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
962 goto stopped;
963
964 printk(KERN_WARNING PFX "%s: receiver stop failed\n",
965 sky2->netdev->name);
966 stopped:
967 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
968
969 /* reset the Rx prefetch unit */
970 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
971 }
972
973 /* Clean out receive buffer area, assumes receiver hardware stopped */
974 static void sky2_rx_clean(struct sky2_port *sky2)
975 {
976 unsigned i;
977
978 memset(sky2->rx_le, 0, RX_LE_BYTES);
979 for (i = 0; i < sky2->rx_pending; i++) {
980 struct rx_ring_info *re = sky2->rx_ring + i;
981
982 if (re->skb) {
983 sky2_rx_unmap_skb(sky2->hw->pdev, re);
984 kfree_skb(re->skb);
985 re->skb = NULL;
986 }
987 }
988 }
989
990 /* Basic MII support */
991 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
992 {
993 struct mii_ioctl_data *data = if_mii(ifr);
994 struct sky2_port *sky2 = netdev_priv(dev);
995 struct sky2_hw *hw = sky2->hw;
996 int err = -EOPNOTSUPP;
997
998 if (!netif_running(dev))
999 return -ENODEV; /* Phy still in reset */
1000
1001 switch (cmd) {
1002 case SIOCGMIIPHY:
1003 data->phy_id = PHY_ADDR_MARV;
1004
1005 /* fallthru */
1006 case SIOCGMIIREG: {
1007 u16 val = 0;
1008
1009 spin_lock_bh(&sky2->phy_lock);
1010 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1011 spin_unlock_bh(&sky2->phy_lock);
1012
1013 data->val_out = val;
1014 break;
1015 }
1016
1017 case SIOCSMIIREG:
1018 if (!capable(CAP_NET_ADMIN))
1019 return -EPERM;
1020
1021 spin_lock_bh(&sky2->phy_lock);
1022 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1023 data->val_in);
1024 spin_unlock_bh(&sky2->phy_lock);
1025 break;
1026 }
1027 return err;
1028 }
1029
1030 #ifdef SKY2_VLAN_TAG_USED
1031 static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1032 {
1033 struct sky2_port *sky2 = netdev_priv(dev);
1034 struct sky2_hw *hw = sky2->hw;
1035 u16 port = sky2->port;
1036
1037 netif_tx_lock_bh(dev);
1038
1039 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON);
1040 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON);
1041 sky2->vlgrp = grp;
1042
1043 netif_tx_unlock_bh(dev);
1044 }
1045
1046 static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
1047 {
1048 struct sky2_port *sky2 = netdev_priv(dev);
1049 struct sky2_hw *hw = sky2->hw;
1050 u16 port = sky2->port;
1051
1052 netif_tx_lock_bh(dev);
1053
1054 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
1055 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
1056 if (sky2->vlgrp)
1057 sky2->vlgrp->vlan_devices[vid] = NULL;
1058
1059 netif_tx_unlock_bh(dev);
1060 }
1061 #endif
1062
1063 /*
1064 * Allocate an skb for receiving. If the MTU is large enough
1065 * make the skb non-linear with a fragment list of pages.
1066 *
1067 * It appears the hardware has a bug in the FIFO logic that
1068 * cause it to hang if the FIFO gets overrun and the receive buffer
1069 * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is
1070 * aligned except if slab debugging is enabled.
1071 */
1072 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
1073 {
1074 struct sk_buff *skb;
1075 unsigned long p;
1076 int i;
1077
1078 skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN);
1079 if (!skb)
1080 goto nomem;
1081
1082 p = (unsigned long) skb->data;
1083 skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
1084
1085 for (i = 0; i < sky2->rx_nfrags; i++) {
1086 struct page *page = alloc_page(GFP_ATOMIC);
1087
1088 if (!page)
1089 goto free_partial;
1090 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1091 }
1092
1093 return skb;
1094 free_partial:
1095 kfree_skb(skb);
1096 nomem:
1097 return NULL;
1098 }
1099
1100 /*
1101 * Allocate and setup receiver buffer pool.
1102 * Normal case this ends up creating one list element for skb
1103 * in the receive ring. Worst case if using large MTU and each
1104 * allocation falls on a different 64 bit region, that results
1105 * in 6 list elements per ring entry.
1106 * One element is used for checksum enable/disable, and one
1107 * extra to avoid wrap.
1108 */
1109 static int sky2_rx_start(struct sky2_port *sky2)
1110 {
1111 struct sky2_hw *hw = sky2->hw;
1112 struct rx_ring_info *re;
1113 unsigned rxq = rxqaddr[sky2->port];
1114 unsigned i, size, space, thresh;
1115
1116 sky2->rx_put = sky2->rx_next = 0;
1117 sky2_qset(hw, rxq);
1118
1119 /* On PCI express lowering the watermark gives better performance */
1120 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
1121 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1122
1123 /* These chips have no ram buffer?
1124 * MAC Rx RAM Read is controlled by hardware */
1125 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1126 (hw->chip_rev == CHIP_REV_YU_EC_U_A1
1127 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
1128 sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
1129
1130 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1131
1132 rx_set_checksum(sky2);
1133
1134 /* Space needed for frame data + headers rounded up */
1135 size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8)
1136 + 8;
1137
1138 /* Stopping point for hardware truncation */
1139 thresh = (size - 8) / sizeof(u32);
1140
1141 /* Account for overhead of skb - to avoid order > 0 allocation */
1142 space = SKB_DATA_ALIGN(size) + NET_SKB_PAD
1143 + sizeof(struct skb_shared_info);
1144
1145 sky2->rx_nfrags = space >> PAGE_SHIFT;
1146 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1147
1148 if (sky2->rx_nfrags != 0) {
1149 /* Compute residue after pages */
1150 space = sky2->rx_nfrags << PAGE_SHIFT;
1151
1152 if (space < size)
1153 size -= space;
1154 else
1155 size = 0;
1156
1157 /* Optimize to handle small packets and headers */
1158 if (size < copybreak)
1159 size = copybreak;
1160 if (size < ETH_HLEN)
1161 size = ETH_HLEN;
1162 }
1163 sky2->rx_data_size = size;
1164
1165 /* Fill Rx ring */
1166 for (i = 0; i < sky2->rx_pending; i++) {
1167 re = sky2->rx_ring + i;
1168
1169 re->skb = sky2_rx_alloc(sky2);
1170 if (!re->skb)
1171 goto nomem;
1172
1173 sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size);
1174 sky2_rx_submit(sky2, re);
1175 }
1176
1177 /*
1178 * The receiver hangs if it receives frames larger than the
1179 * packet buffer. As a workaround, truncate oversize frames, but
1180 * the register is limited to 9 bits, so if you do frames > 2052
1181 * you better get the MTU right!
1182 */
1183 if (thresh > 0x1ff)
1184 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1185 else {
1186 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1187 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1188 }
1189
1190 /* Tell chip about available buffers */
1191 sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
1192 return 0;
1193 nomem:
1194 sky2_rx_clean(sky2);
1195 return -ENOMEM;
1196 }
1197
1198 /* Bring up network interface. */
1199 static int sky2_up(struct net_device *dev)
1200 {
1201 struct sky2_port *sky2 = netdev_priv(dev);
1202 struct sky2_hw *hw = sky2->hw;
1203 unsigned port = sky2->port;
1204 u32 ramsize, imask;
1205 int cap, err = -ENOMEM;
1206 struct net_device *otherdev = hw->dev[sky2->port^1];
1207
1208 /*
1209 * On dual port PCI-X card, there is an problem where status
1210 * can be received out of order due to split transactions
1211 */
1212 if (otherdev && netif_running(otherdev) &&
1213 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1214 struct sky2_port *osky2 = netdev_priv(otherdev);
1215 u16 cmd;
1216
1217 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1218 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1219 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1220
1221 sky2->rx_csum = 0;
1222 osky2->rx_csum = 0;
1223 }
1224
1225 if (netif_msg_ifup(sky2))
1226 printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
1227
1228 /* must be power of 2 */
1229 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1230 TX_RING_SIZE *
1231 sizeof(struct sky2_tx_le),
1232 &sky2->tx_le_map);
1233 if (!sky2->tx_le)
1234 goto err_out;
1235
1236 sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
1237 GFP_KERNEL);
1238 if (!sky2->tx_ring)
1239 goto err_out;
1240 sky2->tx_prod = sky2->tx_cons = 0;
1241
1242 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1243 &sky2->rx_le_map);
1244 if (!sky2->rx_le)
1245 goto err_out;
1246 memset(sky2->rx_le, 0, RX_LE_BYTES);
1247
1248 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1249 GFP_KERNEL);
1250 if (!sky2->rx_ring)
1251 goto err_out;
1252
1253 sky2_phy_power(hw, port, 1);
1254
1255 sky2_mac_init(hw, port);
1256
1257 /* Register is number of 4K blocks on internal RAM buffer. */
1258 ramsize = sky2_read8(hw, B2_E_0) * 4;
1259 printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize);
1260
1261 if (ramsize > 0) {
1262 u32 rxspace;
1263
1264 if (ramsize < 16)
1265 rxspace = ramsize / 2;
1266 else
1267 rxspace = 8 + (2*(ramsize - 16))/3;
1268
1269 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1270 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1271
1272 /* Make sure SyncQ is disabled */
1273 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1274 RB_RST_SET);
1275 }
1276
1277 sky2_qset(hw, txqaddr[port]);
1278
1279 /* Set almost empty threshold */
1280 if (hw->chip_id == CHIP_ID_YUKON_EC_U
1281 && hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1282 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
1283
1284 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1285 TX_RING_SIZE - 1);
1286
1287 err = sky2_rx_start(sky2);
1288 if (err)
1289 goto err_out;
1290
1291 /* Enable interrupts from phy/mac for port */
1292 imask = sky2_read32(hw, B0_IMSK);
1293 imask |= portirq_msk[port];
1294 sky2_write32(hw, B0_IMSK, imask);
1295
1296 return 0;
1297
1298 err_out:
1299 if (sky2->rx_le) {
1300 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1301 sky2->rx_le, sky2->rx_le_map);
1302 sky2->rx_le = NULL;
1303 }
1304 if (sky2->tx_le) {
1305 pci_free_consistent(hw->pdev,
1306 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1307 sky2->tx_le, sky2->tx_le_map);
1308 sky2->tx_le = NULL;
1309 }
1310 kfree(sky2->tx_ring);
1311 kfree(sky2->rx_ring);
1312
1313 sky2->tx_ring = NULL;
1314 sky2->rx_ring = NULL;
1315 return err;
1316 }
1317
1318 /* Modular subtraction in ring */
1319 static inline int tx_dist(unsigned tail, unsigned head)
1320 {
1321 return (head - tail) & (TX_RING_SIZE - 1);
1322 }
1323
1324 /* Number of list elements available for next tx */
1325 static inline int tx_avail(const struct sky2_port *sky2)
1326 {
1327 return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
1328 }
1329
1330 /* Estimate of number of transmit list elements required */
1331 static unsigned tx_le_req(const struct sk_buff *skb)
1332 {
1333 unsigned count;
1334
1335 count = sizeof(dma_addr_t) / sizeof(u32);
1336 count += skb_shinfo(skb)->nr_frags * count;
1337
1338 if (skb_is_gso(skb))
1339 ++count;
1340
1341 if (skb->ip_summed == CHECKSUM_PARTIAL)
1342 ++count;
1343
1344 return count;
1345 }
1346
1347 /*
1348 * Put one packet in ring for transmit.
1349 * A single packet can generate multiple list elements, and
1350 * the number of ring elements will probably be less than the number
1351 * of list elements used.
1352 */
1353 static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
1354 {
1355 struct sky2_port *sky2 = netdev_priv(dev);
1356 struct sky2_hw *hw = sky2->hw;
1357 struct sky2_tx_le *le = NULL;
1358 struct tx_ring_info *re;
1359 unsigned i, len;
1360 dma_addr_t mapping;
1361 u32 addr64;
1362 u16 mss;
1363 u8 ctrl;
1364
1365 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1366 return NETDEV_TX_BUSY;
1367
1368 if (unlikely(netif_msg_tx_queued(sky2)))
1369 printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
1370 dev->name, sky2->tx_prod, skb->len);
1371
1372 len = skb_headlen(skb);
1373 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1374 addr64 = high32(mapping);
1375
1376 /* Send high bits if changed or crosses boundary */
1377 if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
1378 le = get_tx_le(sky2);
1379 le->addr = cpu_to_le32(addr64);
1380 le->opcode = OP_ADDR64 | HW_OWNER;
1381 sky2->tx_addr64 = high32(mapping + len);
1382 }
1383
1384 /* Check for TCP Segmentation Offload */
1385 mss = skb_shinfo(skb)->gso_size;
1386 if (mss != 0) {
1387 mss += ((skb->h.th->doff - 5) * 4); /* TCP options */
1388 mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
1389 mss += ETH_HLEN;
1390
1391 if (mss != sky2->tx_last_mss) {
1392 le = get_tx_le(sky2);
1393 le->addr = cpu_to_le32(mss);
1394 le->opcode = OP_LRGLEN | HW_OWNER;
1395 sky2->tx_last_mss = mss;
1396 }
1397 }
1398
1399 ctrl = 0;
1400 #ifdef SKY2_VLAN_TAG_USED
1401 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1402 if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
1403 if (!le) {
1404 le = get_tx_le(sky2);
1405 le->addr = 0;
1406 le->opcode = OP_VLAN|HW_OWNER;
1407 } else
1408 le->opcode |= OP_VLAN;
1409 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1410 ctrl |= INS_VLAN;
1411 }
1412 #endif
1413
1414 /* Handle TCP checksum offload */
1415 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1416 unsigned offset = skb->h.raw - skb->data;
1417 u32 tcpsum;
1418
1419 tcpsum = offset << 16; /* sum start */
1420 tcpsum |= offset + skb->csum_offset; /* sum write */
1421
1422 ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1423 if (skb->nh.iph->protocol == IPPROTO_UDP)
1424 ctrl |= UDPTCP;
1425
1426 if (tcpsum != sky2->tx_tcpsum) {
1427 sky2->tx_tcpsum = tcpsum;
1428
1429 le = get_tx_le(sky2);
1430 le->addr = cpu_to_le32(tcpsum);
1431 le->length = 0; /* initial checksum value */
1432 le->ctrl = 1; /* one packet */
1433 le->opcode = OP_TCPLISW | HW_OWNER;
1434 }
1435 }
1436
1437 le = get_tx_le(sky2);
1438 le->addr = cpu_to_le32((u32) mapping);
1439 le->length = cpu_to_le16(len);
1440 le->ctrl = ctrl;
1441 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1442
1443 re = tx_le_re(sky2, le);
1444 re->skb = skb;
1445 pci_unmap_addr_set(re, mapaddr, mapping);
1446 pci_unmap_len_set(re, maplen, len);
1447
1448 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1449 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1450
1451 mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
1452 frag->size, PCI_DMA_TODEVICE);
1453 addr64 = high32(mapping);
1454 if (addr64 != sky2->tx_addr64) {
1455 le = get_tx_le(sky2);
1456 le->addr = cpu_to_le32(addr64);
1457 le->ctrl = 0;
1458 le->opcode = OP_ADDR64 | HW_OWNER;
1459 sky2->tx_addr64 = addr64;
1460 }
1461
1462 le = get_tx_le(sky2);
1463 le->addr = cpu_to_le32((u32) mapping);
1464 le->length = cpu_to_le16(frag->size);
1465 le->ctrl = ctrl;
1466 le->opcode = OP_BUFFER | HW_OWNER;
1467
1468 re = tx_le_re(sky2, le);
1469 re->skb = skb;
1470 pci_unmap_addr_set(re, mapaddr, mapping);
1471 pci_unmap_len_set(re, maplen, frag->size);
1472 }
1473
1474 le->ctrl |= EOP;
1475
1476 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1477 netif_stop_queue(dev);
1478
1479 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1480
1481 dev->trans_start = jiffies;
1482 return NETDEV_TX_OK;
1483 }
1484
1485 /*
1486 * Free ring elements from starting at tx_cons until "done"
1487 *
1488 * NB: the hardware will tell us about partial completion of multi-part
1489 * buffers so make sure not to free skb to early.
1490 */
1491 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1492 {
1493 struct net_device *dev = sky2->netdev;
1494 struct pci_dev *pdev = sky2->hw->pdev;
1495 unsigned idx;
1496
1497 BUG_ON(done >= TX_RING_SIZE);
1498
1499 for (idx = sky2->tx_cons; idx != done;
1500 idx = RING_NEXT(idx, TX_RING_SIZE)) {
1501 struct sky2_tx_le *le = sky2->tx_le + idx;
1502 struct tx_ring_info *re = sky2->tx_ring + idx;
1503
1504 switch(le->opcode & ~HW_OWNER) {
1505 case OP_LARGESEND:
1506 case OP_PACKET:
1507 pci_unmap_single(pdev,
1508 pci_unmap_addr(re, mapaddr),
1509 pci_unmap_len(re, maplen),
1510 PCI_DMA_TODEVICE);
1511 break;
1512 case OP_BUFFER:
1513 pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
1514 pci_unmap_len(re, maplen),
1515 PCI_DMA_TODEVICE);
1516 break;
1517 }
1518
1519 if (le->ctrl & EOP) {
1520 if (unlikely(netif_msg_tx_done(sky2)))
1521 printk(KERN_DEBUG "%s: tx done %u\n",
1522 dev->name, idx);
1523 sky2->net_stats.tx_packets++;
1524 sky2->net_stats.tx_bytes += re->skb->len;
1525
1526 dev_kfree_skb_any(re->skb);
1527 }
1528
1529 le->opcode = 0; /* paranoia */
1530 }
1531
1532 sky2->tx_cons = idx;
1533 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
1534 netif_wake_queue(dev);
1535 }
1536
1537 /* Cleanup all untransmitted buffers, assume transmitter not running */
1538 static void sky2_tx_clean(struct net_device *dev)
1539 {
1540 struct sky2_port *sky2 = netdev_priv(dev);
1541
1542 netif_tx_lock_bh(dev);
1543 sky2_tx_complete(sky2, sky2->tx_prod);
1544 netif_tx_unlock_bh(dev);
1545 }
1546
1547 /* Network shutdown */
1548 static int sky2_down(struct net_device *dev)
1549 {
1550 struct sky2_port *sky2 = netdev_priv(dev);
1551 struct sky2_hw *hw = sky2->hw;
1552 unsigned port = sky2->port;
1553 u16 ctrl;
1554 u32 imask;
1555
1556 /* Never really got started! */
1557 if (!sky2->tx_le)
1558 return 0;
1559
1560 if (netif_msg_ifdown(sky2))
1561 printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
1562
1563 /* Stop more packets from being queued */
1564 netif_stop_queue(dev);
1565
1566 /* Disable port IRQ */
1567 imask = sky2_read32(hw, B0_IMSK);
1568 imask &= ~portirq_msk[port];
1569 sky2_write32(hw, B0_IMSK, imask);
1570
1571 /*
1572 * Both ports share the NAPI poll on port 0, so if necessary undo the
1573 * the disable that is done in dev_close.
1574 */
1575 if (sky2->port == 0 && hw->ports > 1)
1576 netif_poll_enable(dev);
1577
1578 sky2_gmac_reset(hw, port);
1579
1580 /* Stop transmitter */
1581 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
1582 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
1583
1584 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
1585 RB_RST_SET | RB_DIS_OP_MD);
1586
1587 /* WA for dev. #4.209 */
1588 if (hw->chip_id == CHIP_ID_YUKON_EC_U
1589 && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
1590 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1591 sky2->speed != SPEED_1000 ?
1592 TX_STFW_ENA : TX_STFW_DIS);
1593
1594 ctrl = gma_read16(hw, port, GM_GP_CTRL);
1595 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
1596 gma_write16(hw, port, GM_GP_CTRL, ctrl);
1597
1598 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
1599
1600 /* Workaround shared GMAC reset */
1601 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
1602 && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
1603 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
1604
1605 /* Disable Force Sync bit and Enable Alloc bit */
1606 sky2_write8(hw, SK_REG(port, TXA_CTRL),
1607 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
1608
1609 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
1610 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
1611 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
1612
1613 /* Reset the PCI FIFO of the async Tx queue */
1614 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
1615 BMU_RST_SET | BMU_FIFO_RST);
1616
1617 /* Reset the Tx prefetch units */
1618 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
1619 PREF_UNIT_RST_SET);
1620
1621 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
1622
1623 sky2_rx_stop(sky2);
1624
1625 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
1626 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
1627
1628 sky2_phy_power(hw, port, 0);
1629
1630 /* turn off LED's */
1631 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
1632
1633 synchronize_irq(hw->pdev->irq);
1634
1635 sky2_tx_clean(dev);
1636 sky2_rx_clean(sky2);
1637
1638 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1639 sky2->rx_le, sky2->rx_le_map);
1640 kfree(sky2->rx_ring);
1641
1642 pci_free_consistent(hw->pdev,
1643 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1644 sky2->tx_le, sky2->tx_le_map);
1645 kfree(sky2->tx_ring);
1646
1647 sky2->tx_le = NULL;
1648 sky2->rx_le = NULL;
1649
1650 sky2->rx_ring = NULL;
1651 sky2->tx_ring = NULL;
1652
1653 return 0;
1654 }
1655
1656 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
1657 {
1658 if (!sky2_is_copper(hw))
1659 return SPEED_1000;
1660
1661 if (hw->chip_id == CHIP_ID_YUKON_FE)
1662 return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
1663
1664 switch (aux & PHY_M_PS_SPEED_MSK) {
1665 case PHY_M_PS_SPEED_1000:
1666 return SPEED_1000;
1667 case PHY_M_PS_SPEED_100:
1668 return SPEED_100;
1669 default:
1670 return SPEED_10;
1671 }
1672 }
1673
1674 static void sky2_link_up(struct sky2_port *sky2)
1675 {
1676 struct sky2_hw *hw = sky2->hw;
1677 unsigned port = sky2->port;
1678 u16 reg;
1679 static const char *fc_name[] = {
1680 [FC_NONE] = "none",
1681 [FC_TX] = "tx",
1682 [FC_RX] = "rx",
1683 [FC_BOTH] = "both",
1684 };
1685
1686 /* enable Rx/Tx */
1687 reg = gma_read16(hw, port, GM_GP_CTRL);
1688 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
1689 gma_write16(hw, port, GM_GP_CTRL, reg);
1690
1691 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
1692
1693 netif_carrier_on(sky2->netdev);
1694 netif_wake_queue(sky2->netdev);
1695
1696 /* Turn on link LED */
1697 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
1698 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
1699
1700 if (hw->chip_id == CHIP_ID_YUKON_XL
1701 || hw->chip_id == CHIP_ID_YUKON_EC_U
1702 || hw->chip_id == CHIP_ID_YUKON_EX) {
1703 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
1704 u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
1705
1706 switch(sky2->speed) {
1707 case SPEED_10:
1708 led |= PHY_M_LEDC_INIT_CTRL(7);
1709 break;
1710
1711 case SPEED_100:
1712 led |= PHY_M_LEDC_STA1_CTRL(7);
1713 break;
1714
1715 case SPEED_1000:
1716 led |= PHY_M_LEDC_STA0_CTRL(7);
1717 break;
1718 }
1719
1720 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
1721 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
1722 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
1723 }
1724
1725 if (netif_msg_link(sky2))
1726 printk(KERN_INFO PFX
1727 "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
1728 sky2->netdev->name, sky2->speed,
1729 sky2->duplex == DUPLEX_FULL ? "full" : "half",
1730 fc_name[sky2->flow_status]);
1731 }
1732
1733 static void sky2_link_down(struct sky2_port *sky2)
1734 {
1735 struct sky2_hw *hw = sky2->hw;
1736 unsigned port = sky2->port;
1737 u16 reg;
1738
1739 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
1740
1741 reg = gma_read16(hw, port, GM_GP_CTRL);
1742 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
1743 gma_write16(hw, port, GM_GP_CTRL, reg);
1744
1745 netif_carrier_off(sky2->netdev);
1746 netif_stop_queue(sky2->netdev);
1747
1748 /* Turn on link LED */
1749 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
1750
1751 if (netif_msg_link(sky2))
1752 printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
1753
1754 sky2_phy_init(hw, port);
1755 }
1756
1757 static enum flow_control sky2_flow(int rx, int tx)
1758 {
1759 if (rx)
1760 return tx ? FC_BOTH : FC_RX;
1761 else
1762 return tx ? FC_TX : FC_NONE;
1763 }
1764
1765 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
1766 {
1767 struct sky2_hw *hw = sky2->hw;
1768 unsigned port = sky2->port;
1769 u16 advert, lpa;
1770
1771 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
1772 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
1773 if (lpa & PHY_M_AN_RF) {
1774 printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
1775 return -1;
1776 }
1777
1778 if (!(aux & PHY_M_PS_SPDUP_RES)) {
1779 printk(KERN_ERR PFX "%s: speed/duplex mismatch",
1780 sky2->netdev->name);
1781 return -1;
1782 }
1783
1784 sky2->speed = sky2_phy_speed(hw, aux);
1785 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1786
1787 /* Since the pause result bits seem to in different positions on
1788 * different chips. look at registers.
1789 */
1790 if (!sky2_is_copper(hw)) {
1791 /* Shift for bits in fiber PHY */
1792 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
1793 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
1794
1795 if (advert & ADVERTISE_1000XPAUSE)
1796 advert |= ADVERTISE_PAUSE_CAP;
1797 if (advert & ADVERTISE_1000XPSE_ASYM)
1798 advert |= ADVERTISE_PAUSE_ASYM;
1799 if (lpa & LPA_1000XPAUSE)
1800 lpa |= LPA_PAUSE_CAP;
1801 if (lpa & LPA_1000XPAUSE_ASYM)
1802 lpa |= LPA_PAUSE_ASYM;
1803 }
1804
1805 sky2->flow_status = FC_NONE;
1806 if (advert & ADVERTISE_PAUSE_CAP) {
1807 if (lpa & LPA_PAUSE_CAP)
1808 sky2->flow_status = FC_BOTH;
1809 else if (advert & ADVERTISE_PAUSE_ASYM)
1810 sky2->flow_status = FC_RX;
1811 } else if (advert & ADVERTISE_PAUSE_ASYM) {
1812 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
1813 sky2->flow_status = FC_TX;
1814 }
1815
1816 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
1817 && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
1818 sky2->flow_status = FC_NONE;
1819
1820 if (sky2->flow_status & FC_TX)
1821 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
1822 else
1823 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
1824
1825 return 0;
1826 }
1827
1828 /* Interrupt from PHY */
1829 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
1830 {
1831 struct net_device *dev = hw->dev[port];
1832 struct sky2_port *sky2 = netdev_priv(dev);
1833 u16 istatus, phystat;
1834
1835 if (!netif_running(dev))
1836 return;
1837
1838 spin_lock(&sky2->phy_lock);
1839 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
1840 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
1841
1842 if (netif_msg_intr(sky2))
1843 printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
1844 sky2->netdev->name, istatus, phystat);
1845
1846 if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) {
1847 if (sky2_autoneg_done(sky2, phystat) == 0)
1848 sky2_link_up(sky2);
1849 goto out;
1850 }
1851
1852 if (istatus & PHY_M_IS_LSP_CHANGE)
1853 sky2->speed = sky2_phy_speed(hw, phystat);
1854
1855 if (istatus & PHY_M_IS_DUP_CHANGE)
1856 sky2->duplex =
1857 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1858
1859 if (istatus & PHY_M_IS_LST_CHANGE) {
1860 if (phystat & PHY_M_PS_LINK_UP)
1861 sky2_link_up(sky2);
1862 else
1863 sky2_link_down(sky2);
1864 }
1865 out:
1866 spin_unlock(&sky2->phy_lock);
1867 }
1868
1869 /* Transmit timeout is only called if we are running, carrier is up
1870 * and tx queue is full (stopped).
1871 */
1872 static void sky2_tx_timeout(struct net_device *dev)
1873 {
1874 struct sky2_port *sky2 = netdev_priv(dev);
1875 struct sky2_hw *hw = sky2->hw;
1876
1877 if (netif_msg_timer(sky2))
1878 printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
1879
1880 printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
1881 dev->name, sky2->tx_cons, sky2->tx_prod,
1882 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
1883 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
1884
1885 /* can't restart safely under softirq */
1886 schedule_work(&hw->restart_work);
1887 }
1888
1889 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
1890 {
1891 struct sky2_port *sky2 = netdev_priv(dev);
1892 struct sky2_hw *hw = sky2->hw;
1893 int err;
1894 u16 ctl, mode;
1895 u32 imask;
1896
1897 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
1898 return -EINVAL;
1899
1900 /* TSO on Yukon Ultra and MTU > 1500 not supported */
1901 if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
1902 dev->features &= ~NETIF_F_TSO;
1903
1904 if (!netif_running(dev)) {
1905 dev->mtu = new_mtu;
1906 return 0;
1907 }
1908
1909 imask = sky2_read32(hw, B0_IMSK);
1910 sky2_write32(hw, B0_IMSK, 0);
1911
1912 dev->trans_start = jiffies; /* prevent tx timeout */
1913 netif_stop_queue(dev);
1914 netif_poll_disable(hw->dev[0]);
1915
1916 synchronize_irq(hw->pdev->irq);
1917
1918 ctl = gma_read16(hw, sky2->port, GM_GP_CTRL);
1919 gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
1920 sky2_rx_stop(sky2);
1921 sky2_rx_clean(sky2);
1922
1923 dev->mtu = new_mtu;
1924
1925 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
1926 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
1927
1928 if (dev->mtu > ETH_DATA_LEN)
1929 mode |= GM_SMOD_JUMBO_ENA;
1930
1931 gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode);
1932
1933 sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD);
1934
1935 err = sky2_rx_start(sky2);
1936 sky2_write32(hw, B0_IMSK, imask);
1937
1938 if (err)
1939 dev_close(dev);
1940 else {
1941 gma_write16(hw, sky2->port, GM_GP_CTRL, ctl);
1942
1943 netif_poll_enable(hw->dev[0]);
1944 netif_wake_queue(dev);
1945 }
1946
1947 return err;
1948 }
1949
1950 /* For small just reuse existing skb for next receive */
1951 static struct sk_buff *receive_copy(struct sky2_port *sky2,
1952 const struct rx_ring_info *re,
1953 unsigned length)
1954 {
1955 struct sk_buff *skb;
1956
1957 skb = netdev_alloc_skb(sky2->netdev, length + 2);
1958 if (likely(skb)) {
1959 skb_reserve(skb, 2);
1960 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
1961 length, PCI_DMA_FROMDEVICE);
1962 memcpy(skb->data, re->skb->data, length);
1963 skb->ip_summed = re->skb->ip_summed;
1964 skb->csum = re->skb->csum;
1965 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
1966 length, PCI_DMA_FROMDEVICE);
1967 re->skb->ip_summed = CHECKSUM_NONE;
1968 skb_put(skb, length);
1969 }
1970 return skb;
1971 }
1972
1973 /* Adjust length of skb with fragments to match received data */
1974 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
1975 unsigned int length)
1976 {
1977 int i, num_frags;
1978 unsigned int size;
1979
1980 /* put header into skb */
1981 size = min(length, hdr_space);
1982 skb->tail += size;
1983 skb->len += size;
1984 length -= size;
1985
1986 num_frags = skb_shinfo(skb)->nr_frags;
1987 for (i = 0; i < num_frags; i++) {
1988 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1989
1990 if (length == 0) {
1991 /* don't need this page */
1992 __free_page(frag->page);
1993 --skb_shinfo(skb)->nr_frags;
1994 } else {
1995 size = min(length, (unsigned) PAGE_SIZE);
1996
1997 frag->size = size;
1998 skb->data_len += size;
1999 skb->truesize += size;
2000 skb->len += size;
2001 length -= size;
2002 }
2003 }
2004 }
2005
2006 /* Normal packet - take skb from ring element and put in a new one */
2007 static struct sk_buff *receive_new(struct sky2_port *sky2,
2008 struct rx_ring_info *re,
2009 unsigned int length)
2010 {
2011 struct sk_buff *skb, *nskb;
2012 unsigned hdr_space = sky2->rx_data_size;
2013
2014 pr_debug(PFX "receive new length=%d\n", length);
2015
2016 /* Don't be tricky about reusing pages (yet) */
2017 nskb = sky2_rx_alloc(sky2);
2018 if (unlikely(!nskb))
2019 return NULL;
2020
2021 skb = re->skb;
2022 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2023
2024 prefetch(skb->data);
2025 re->skb = nskb;
2026 sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space);
2027
2028 if (skb_shinfo(skb)->nr_frags)
2029 skb_put_frags(skb, hdr_space, length);
2030 else
2031 skb_put(skb, length);
2032 return skb;
2033 }
2034
2035 /*
2036 * Receive one packet.
2037 * For larger packets, get new buffer.
2038 */
2039 static struct sk_buff *sky2_receive(struct net_device *dev,
2040 u16 length, u32 status)
2041 {
2042 struct sky2_port *sky2 = netdev_priv(dev);
2043 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2044 struct sk_buff *skb = NULL;
2045
2046 if (unlikely(netif_msg_rx_status(sky2)))
2047 printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
2048 dev->name, sky2->rx_next, status, length);
2049
2050 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2051 prefetch(sky2->rx_ring + sky2->rx_next);
2052
2053 if (status & GMR_FS_ANY_ERR)
2054 goto error;
2055
2056 if (!(status & GMR_FS_RX_OK))
2057 goto resubmit;
2058
2059 if (length > dev->mtu + ETH_HLEN)
2060 goto oversize;
2061
2062 if (length < copybreak)
2063 skb = receive_copy(sky2, re, length);
2064 else
2065 skb = receive_new(sky2, re, length);
2066 resubmit:
2067 sky2_rx_submit(sky2, re);
2068
2069 return skb;
2070
2071 oversize:
2072 ++sky2->net_stats.rx_over_errors;
2073 goto resubmit;
2074
2075 error:
2076 ++sky2->net_stats.rx_errors;
2077 if (status & GMR_FS_RX_FF_OV) {
2078 sky2->net_stats.rx_fifo_errors++;
2079 goto resubmit;
2080 }
2081
2082 if (netif_msg_rx_err(sky2) && net_ratelimit())
2083 printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
2084 dev->name, status, length);
2085
2086 if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
2087 sky2->net_stats.rx_length_errors++;
2088 if (status & GMR_FS_FRAGMENT)
2089 sky2->net_stats.rx_frame_errors++;
2090 if (status & GMR_FS_CRC_ERR)
2091 sky2->net_stats.rx_crc_errors++;
2092
2093 goto resubmit;
2094 }
2095
2096 /* Transmit complete */
2097 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2098 {
2099 struct sky2_port *sky2 = netdev_priv(dev);
2100
2101 if (netif_running(dev)) {
2102 netif_tx_lock(dev);
2103 sky2_tx_complete(sky2, last);
2104 netif_tx_unlock(dev);
2105 }
2106 }
2107
2108 /* Process status response ring */
2109 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
2110 {
2111 struct sky2_port *sky2;
2112 int work_done = 0;
2113 unsigned buf_write[2] = { 0, 0 };
2114 u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
2115
2116 rmb();
2117
2118 while (hw->st_idx != hwidx) {
2119 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2120 struct net_device *dev;
2121 struct sk_buff *skb;
2122 u32 status;
2123 u16 length;
2124
2125 hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
2126
2127 BUG_ON(le->link >= 2);
2128 dev = hw->dev[le->link];
2129
2130 sky2 = netdev_priv(dev);
2131 length = le16_to_cpu(le->length);
2132 status = le32_to_cpu(le->status);
2133
2134 switch (le->opcode & ~HW_OWNER) {
2135 case OP_RXSTAT:
2136 skb = sky2_receive(dev, length, status);
2137 if (!skb)
2138 goto force_update;
2139
2140 skb->protocol = eth_type_trans(skb, dev);
2141 sky2->net_stats.rx_packets++;
2142 sky2->net_stats.rx_bytes += skb->len;
2143 dev->last_rx = jiffies;
2144
2145 #ifdef SKY2_VLAN_TAG_USED
2146 if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
2147 vlan_hwaccel_receive_skb(skb,
2148 sky2->vlgrp,
2149 be16_to_cpu(sky2->rx_tag));
2150 } else
2151 #endif
2152 netif_receive_skb(skb);
2153
2154 /* Update receiver after 16 frames */
2155 if (++buf_write[le->link] == RX_BUF_WRITE) {
2156 force_update:
2157 sky2_put_idx(hw, rxqaddr[le->link], sky2->rx_put);
2158 buf_write[le->link] = 0;
2159 }
2160
2161 /* Stop after net poll weight */
2162 if (++work_done >= to_do)
2163 goto exit_loop;
2164 break;
2165
2166 #ifdef SKY2_VLAN_TAG_USED
2167 case OP_RXVLAN:
2168 sky2->rx_tag = length;
2169 break;
2170
2171 case OP_RXCHKSVLAN:
2172 sky2->rx_tag = length;
2173 /* fall through */
2174 #endif
2175 case OP_RXCHKS:
2176 skb = sky2->rx_ring[sky2->rx_next].skb;
2177 skb->ip_summed = CHECKSUM_COMPLETE;
2178 skb->csum = status & 0xffff;
2179 break;
2180
2181 case OP_TXINDEXLE:
2182 /* TX index reports status for both ports */
2183 BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
2184 sky2_tx_done(hw->dev[0], status & 0xfff);
2185 if (hw->dev[1])
2186 sky2_tx_done(hw->dev[1],
2187 ((status >> 24) & 0xff)
2188 | (u16)(length & 0xf) << 8);
2189 break;
2190
2191 default:
2192 if (net_ratelimit())
2193 printk(KERN_WARNING PFX
2194 "unknown status opcode 0x%x\n", le->opcode);
2195 goto exit_loop;
2196 }
2197 }
2198
2199 /* Fully processed status ring so clear irq */
2200 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2201
2202 exit_loop:
2203 if (buf_write[0]) {
2204 sky2 = netdev_priv(hw->dev[0]);
2205 sky2_put_idx(hw, Q_R1, sky2->rx_put);
2206 }
2207
2208 if (buf_write[1]) {
2209 sky2 = netdev_priv(hw->dev[1]);
2210 sky2_put_idx(hw, Q_R2, sky2->rx_put);
2211 }
2212
2213 return work_done;
2214 }
2215
2216 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2217 {
2218 struct net_device *dev = hw->dev[port];
2219
2220 if (net_ratelimit())
2221 printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
2222 dev->name, status);
2223
2224 if (status & Y2_IS_PAR_RD1) {
2225 if (net_ratelimit())
2226 printk(KERN_ERR PFX "%s: ram data read parity error\n",
2227 dev->name);
2228 /* Clear IRQ */
2229 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2230 }
2231
2232 if (status & Y2_IS_PAR_WR1) {
2233 if (net_ratelimit())
2234 printk(KERN_ERR PFX "%s: ram data write parity error\n",
2235 dev->name);
2236
2237 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2238 }
2239
2240 if (status & Y2_IS_PAR_MAC1) {
2241 if (net_ratelimit())
2242 printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
2243 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2244 }
2245
2246 if (status & Y2_IS_PAR_RX1) {
2247 if (net_ratelimit())
2248 printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
2249 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2250 }
2251
2252 if (status & Y2_IS_TCP_TXA1) {
2253 if (net_ratelimit())
2254 printk(KERN_ERR PFX "%s: TCP segmentation error\n",
2255 dev->name);
2256 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2257 }
2258 }
2259
2260 static void sky2_hw_intr(struct sky2_hw *hw)
2261 {
2262 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2263
2264 if (status & Y2_IS_TIST_OV)
2265 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2266
2267 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2268 u16 pci_err;
2269
2270 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2271 if (net_ratelimit())
2272 dev_err(&hw->pdev->dev, "PCI hardware error (0x%x)\n",
2273 pci_err);
2274
2275 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2276 sky2_pci_write16(hw, PCI_STATUS,
2277 pci_err | PCI_STATUS_ERROR_BITS);
2278 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2279 }
2280
2281 if (status & Y2_IS_PCI_EXP) {
2282 /* PCI-Express uncorrectable Error occurred */
2283 u32 pex_err;
2284
2285 pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
2286
2287 if (net_ratelimit())
2288 dev_err(&hw->pdev->dev, "PCI Express error (0x%x)\n",
2289 pex_err);
2290
2291 /* clear the interrupt */
2292 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2293 sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
2294 0xffffffffUL);
2295 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2296
2297 if (pex_err & PEX_FATAL_ERRORS) {
2298 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2299 hwmsk &= ~Y2_IS_PCI_EXP;
2300 sky2_write32(hw, B0_HWE_IMSK, hwmsk);
2301 }
2302 }
2303
2304 if (status & Y2_HWE_L1_MASK)
2305 sky2_hw_error(hw, 0, status);
2306 status >>= 8;
2307 if (status & Y2_HWE_L1_MASK)
2308 sky2_hw_error(hw, 1, status);
2309 }
2310
2311 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2312 {
2313 struct net_device *dev = hw->dev[port];
2314 struct sky2_port *sky2 = netdev_priv(dev);
2315 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2316
2317 if (netif_msg_intr(sky2))
2318 printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
2319 dev->name, status);
2320
2321 if (status & GM_IS_RX_FF_OR) {
2322 ++sky2->net_stats.rx_fifo_errors;
2323 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2324 }
2325
2326 if (status & GM_IS_TX_FF_UR) {
2327 ++sky2->net_stats.tx_fifo_errors;
2328 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2329 }
2330 }
2331
2332 /* This should never happen it is a fatal situation */
2333 static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
2334 const char *rxtx, u32 mask)
2335 {
2336 struct net_device *dev = hw->dev[port];
2337 struct sky2_port *sky2 = netdev_priv(dev);
2338 u32 imask;
2339
2340 printk(KERN_ERR PFX "%s: %s descriptor error (hardware problem)\n",
2341 dev ? dev->name : "<not registered>", rxtx);
2342
2343 imask = sky2_read32(hw, B0_IMSK);
2344 imask &= ~mask;
2345 sky2_write32(hw, B0_IMSK, imask);
2346
2347 if (dev) {
2348 spin_lock(&sky2->phy_lock);
2349 sky2_link_down(sky2);
2350 spin_unlock(&sky2->phy_lock);
2351 }
2352 }
2353
2354 /* If idle then force a fake soft NAPI poll once a second
2355 * to work around cases where sharing an edge triggered interrupt.
2356 */
2357 static inline void sky2_idle_start(struct sky2_hw *hw)
2358 {
2359 if (idle_timeout > 0)
2360 mod_timer(&hw->idle_timer,
2361 jiffies + msecs_to_jiffies(idle_timeout));
2362 }
2363
2364 static void sky2_idle(unsigned long arg)
2365 {
2366 struct sky2_hw *hw = (struct sky2_hw *) arg;
2367 struct net_device *dev = hw->dev[0];
2368
2369 if (__netif_rx_schedule_prep(dev))
2370 __netif_rx_schedule(dev);
2371
2372 mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
2373 }
2374
2375
2376 static int sky2_poll(struct net_device *dev0, int *budget)
2377 {
2378 struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
2379 int work_limit = min(dev0->quota, *budget);
2380 int work_done = 0;
2381 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2382
2383 if (status & Y2_IS_HW_ERR)
2384 sky2_hw_intr(hw);
2385
2386 if (status & Y2_IS_IRQ_PHY1)
2387 sky2_phy_intr(hw, 0);
2388
2389 if (status & Y2_IS_IRQ_PHY2)
2390 sky2_phy_intr(hw, 1);
2391
2392 if (status & Y2_IS_IRQ_MAC1)
2393 sky2_mac_intr(hw, 0);
2394
2395 if (status & Y2_IS_IRQ_MAC2)
2396 sky2_mac_intr(hw, 1);
2397
2398 if (status & Y2_IS_CHK_RX1)
2399 sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
2400
2401 if (status & Y2_IS_CHK_RX2)
2402 sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
2403
2404 if (status & Y2_IS_CHK_TXA1)
2405 sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
2406
2407 if (status & Y2_IS_CHK_TXA2)
2408 sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
2409
2410 work_done = sky2_status_intr(hw, work_limit);
2411 if (work_done < work_limit) {
2412 netif_rx_complete(dev0);
2413
2414 sky2_read32(hw, B0_Y2_SP_LISR);
2415 return 0;
2416 } else {
2417 *budget -= work_done;
2418 dev0->quota -= work_done;
2419 return 1;
2420 }
2421 }
2422
2423 static irqreturn_t sky2_intr(int irq, void *dev_id)
2424 {
2425 struct sky2_hw *hw = dev_id;
2426 struct net_device *dev0 = hw->dev[0];
2427 u32 status;
2428
2429 /* Reading this mask interrupts as side effect */
2430 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
2431 if (status == 0 || status == ~0)
2432 return IRQ_NONE;
2433
2434 prefetch(&hw->st_le[hw->st_idx]);
2435 if (likely(__netif_rx_schedule_prep(dev0)))
2436 __netif_rx_schedule(dev0);
2437
2438 return IRQ_HANDLED;
2439 }
2440
2441 #ifdef CONFIG_NET_POLL_CONTROLLER
2442 static void sky2_netpoll(struct net_device *dev)
2443 {
2444 struct sky2_port *sky2 = netdev_priv(dev);
2445 struct net_device *dev0 = sky2->hw->dev[0];
2446
2447 if (netif_running(dev) && __netif_rx_schedule_prep(dev0))
2448 __netif_rx_schedule(dev0);
2449 }
2450 #endif
2451
2452 /* Chip internal frequency for clock calculations */
2453 static inline u32 sky2_mhz(const struct sky2_hw *hw)
2454 {
2455 switch (hw->chip_id) {
2456 case CHIP_ID_YUKON_EC:
2457 case CHIP_ID_YUKON_EC_U:
2458 case CHIP_ID_YUKON_EX:
2459 return 125; /* 125 Mhz */
2460 case CHIP_ID_YUKON_FE:
2461 return 100; /* 100 Mhz */
2462 default: /* YUKON_XL */
2463 return 156; /* 156 Mhz */
2464 }
2465 }
2466
2467 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
2468 {
2469 return sky2_mhz(hw) * us;
2470 }
2471
2472 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
2473 {
2474 return clk / sky2_mhz(hw);
2475 }
2476
2477
2478 static int __devinit sky2_init(struct sky2_hw *hw)
2479 {
2480 u8 t8;
2481
2482 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2483
2484 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
2485 if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
2486 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
2487 hw->chip_id);
2488 return -EOPNOTSUPP;
2489 }
2490
2491 if (hw->chip_id == CHIP_ID_YUKON_EX)
2492 dev_warn(&hw->pdev->dev, "this driver not yet tested on this chip type\n"
2493 "Please report success or failure to <netdev@vger.kernel.org>\n");
2494
2495 /* Make sure and enable all clocks */
2496 if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
2497 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
2498
2499 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
2500
2501 /* This rev is really old, and requires untested workarounds */
2502 if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
2503 dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n",
2504 yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
2505 hw->chip_id, hw->chip_rev);
2506 return -EOPNOTSUPP;
2507 }
2508
2509 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
2510 hw->ports = 1;
2511 t8 = sky2_read8(hw, B2_Y2_HW_RES);
2512 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
2513 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
2514 ++hw->ports;
2515 }
2516
2517 return 0;
2518 }
2519
2520 static void sky2_reset(struct sky2_hw *hw)
2521 {
2522 u16 status;
2523 int i;
2524
2525 /* disable ASF */
2526 if (hw->chip_id <= CHIP_ID_YUKON_EC) {
2527 if (hw->chip_id == CHIP_ID_YUKON_EX) {
2528 status = sky2_read16(hw, HCU_CCSR);
2529 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
2530 HCU_CCSR_UC_STATE_MSK);
2531 sky2_write16(hw, HCU_CCSR, status);
2532 } else
2533 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
2534 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
2535 }
2536
2537 /* do a SW reset */
2538 sky2_write8(hw, B0_CTST, CS_RST_SET);
2539 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2540
2541 /* clear PCI errors, if any */
2542 status = sky2_pci_read16(hw, PCI_STATUS);
2543
2544 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2545 sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
2546
2547
2548 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
2549
2550 /* clear any PEX errors */
2551 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
2552 sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
2553
2554
2555 sky2_power_on(hw);
2556
2557 for (i = 0; i < hw->ports; i++) {
2558 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
2559 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
2560 }
2561
2562 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2563
2564 /* Clear I2C IRQ noise */
2565 sky2_write32(hw, B2_I2C_IRQ, 1);
2566
2567 /* turn off hardware timer (unused) */
2568 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
2569 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
2570
2571 sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
2572
2573 /* Turn off descriptor polling */
2574 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
2575
2576 /* Turn off receive timestamp */
2577 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
2578 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2579
2580 /* enable the Tx Arbiters */
2581 for (i = 0; i < hw->ports; i++)
2582 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
2583
2584 /* Initialize ram interface */
2585 for (i = 0; i < hw->ports; i++) {
2586 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
2587
2588 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
2589 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
2590 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
2591 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
2592 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
2593 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
2594 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
2595 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
2596 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
2597 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
2598 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
2599 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
2600 }
2601
2602 sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
2603
2604 for (i = 0; i < hw->ports; i++)
2605 sky2_gmac_reset(hw, i);
2606
2607 memset(hw->st_le, 0, STATUS_LE_BYTES);
2608 hw->st_idx = 0;
2609
2610 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
2611 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
2612
2613 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
2614 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
2615
2616 /* Set the list last index */
2617 sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1);
2618
2619 sky2_write16(hw, STAT_TX_IDX_TH, 10);
2620 sky2_write8(hw, STAT_FIFO_WM, 16);
2621
2622 /* set Status-FIFO ISR watermark */
2623 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
2624 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
2625 else
2626 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
2627
2628 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
2629 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
2630 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
2631
2632 /* enable status unit */
2633 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
2634
2635 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2636 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
2637 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
2638 }
2639
2640 static void sky2_restart(struct work_struct *work)
2641 {
2642 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
2643 struct net_device *dev;
2644 int i, err;
2645
2646 dev_dbg(&hw->pdev->dev, "restarting\n");
2647
2648 del_timer_sync(&hw->idle_timer);
2649
2650 rtnl_lock();
2651 sky2_write32(hw, B0_IMSK, 0);
2652 sky2_read32(hw, B0_IMSK);
2653
2654 netif_poll_disable(hw->dev[0]);
2655
2656 for (i = 0; i < hw->ports; i++) {
2657 dev = hw->dev[i];
2658 if (netif_running(dev))
2659 sky2_down(dev);
2660 }
2661
2662 sky2_reset(hw);
2663 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
2664 netif_poll_enable(hw->dev[0]);
2665
2666 for (i = 0; i < hw->ports; i++) {
2667 dev = hw->dev[i];
2668 if (netif_running(dev)) {
2669 err = sky2_up(dev);
2670 if (err) {
2671 printk(KERN_INFO PFX "%s: could not restart %d\n",
2672 dev->name, err);
2673 dev_close(dev);
2674 }
2675 }
2676 }
2677
2678 sky2_idle_start(hw);
2679
2680 rtnl_unlock();
2681 }
2682
2683 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
2684 {
2685 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
2686 }
2687
2688 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2689 {
2690 const struct sky2_port *sky2 = netdev_priv(dev);
2691
2692 wol->supported = sky2_wol_supported(sky2->hw);
2693 wol->wolopts = sky2->wol;
2694 }
2695
2696 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2697 {
2698 struct sky2_port *sky2 = netdev_priv(dev);
2699 struct sky2_hw *hw = sky2->hw;
2700
2701 if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
2702 return -EOPNOTSUPP;
2703
2704 sky2->wol = wol->wolopts;
2705
2706 if (hw->chip_id == CHIP_ID_YUKON_EC_U)
2707 sky2_write32(hw, B0_CTST, sky2->wol
2708 ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
2709
2710 if (!netif_running(dev))
2711 sky2_wol_init(sky2);
2712 return 0;
2713 }
2714
2715 static u32 sky2_supported_modes(const struct sky2_hw *hw)
2716 {
2717 if (sky2_is_copper(hw)) {
2718 u32 modes = SUPPORTED_10baseT_Half
2719 | SUPPORTED_10baseT_Full
2720 | SUPPORTED_100baseT_Half
2721 | SUPPORTED_100baseT_Full
2722 | SUPPORTED_Autoneg | SUPPORTED_TP;
2723
2724 if (hw->chip_id != CHIP_ID_YUKON_FE)
2725 modes |= SUPPORTED_1000baseT_Half
2726 | SUPPORTED_1000baseT_Full;
2727 return modes;
2728 } else
2729 return SUPPORTED_1000baseT_Half
2730 | SUPPORTED_1000baseT_Full
2731 | SUPPORTED_Autoneg
2732 | SUPPORTED_FIBRE;
2733 }
2734
2735 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2736 {
2737 struct sky2_port *sky2 = netdev_priv(dev);
2738 struct sky2_hw *hw = sky2->hw;
2739
2740 ecmd->transceiver = XCVR_INTERNAL;
2741 ecmd->supported = sky2_supported_modes(hw);
2742 ecmd->phy_address = PHY_ADDR_MARV;
2743 if (sky2_is_copper(hw)) {
2744 ecmd->supported = SUPPORTED_10baseT_Half
2745 | SUPPORTED_10baseT_Full
2746 | SUPPORTED_100baseT_Half
2747 | SUPPORTED_100baseT_Full
2748 | SUPPORTED_1000baseT_Half
2749 | SUPPORTED_1000baseT_Full
2750 | SUPPORTED_Autoneg | SUPPORTED_TP;
2751 ecmd->port = PORT_TP;
2752 ecmd->speed = sky2->speed;
2753 } else {
2754 ecmd->speed = SPEED_1000;
2755 ecmd->port = PORT_FIBRE;
2756 }
2757
2758 ecmd->advertising = sky2->advertising;
2759 ecmd->autoneg = sky2->autoneg;
2760 ecmd->duplex = sky2->duplex;
2761 return 0;
2762 }
2763
2764 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2765 {
2766 struct sky2_port *sky2 = netdev_priv(dev);
2767 const struct sky2_hw *hw = sky2->hw;
2768 u32 supported = sky2_supported_modes(hw);
2769
2770 if (ecmd->autoneg == AUTONEG_ENABLE) {
2771 ecmd->advertising = supported;
2772 sky2->duplex = -1;
2773 sky2->speed = -1;
2774 } else {
2775 u32 setting;
2776
2777 switch (ecmd->speed) {
2778 case SPEED_1000:
2779 if (ecmd->duplex == DUPLEX_FULL)
2780 setting = SUPPORTED_1000baseT_Full;
2781 else if (ecmd->duplex == DUPLEX_HALF)
2782 setting = SUPPORTED_1000baseT_Half;
2783 else
2784 return -EINVAL;
2785 break;
2786 case SPEED_100:
2787 if (ecmd->duplex == DUPLEX_FULL)
2788 setting = SUPPORTED_100baseT_Full;
2789 else if (ecmd->duplex == DUPLEX_HALF)
2790 setting = SUPPORTED_100baseT_Half;
2791 else
2792 return -EINVAL;
2793 break;
2794
2795 case SPEED_10:
2796 if (ecmd->duplex == DUPLEX_FULL)
2797 setting = SUPPORTED_10baseT_Full;
2798 else if (ecmd->duplex == DUPLEX_HALF)
2799 setting = SUPPORTED_10baseT_Half;
2800 else
2801 return -EINVAL;
2802 break;
2803 default:
2804 return -EINVAL;
2805 }
2806
2807 if ((setting & supported) == 0)
2808 return -EINVAL;
2809
2810 sky2->speed = ecmd->speed;
2811 sky2->duplex = ecmd->duplex;
2812 }
2813
2814 sky2->autoneg = ecmd->autoneg;
2815 sky2->advertising = ecmd->advertising;
2816
2817 if (netif_running(dev))
2818 sky2_phy_reinit(sky2);
2819
2820 return 0;
2821 }
2822
2823 static void sky2_get_drvinfo(struct net_device *dev,
2824 struct ethtool_drvinfo *info)
2825 {
2826 struct sky2_port *sky2 = netdev_priv(dev);
2827
2828 strcpy(info->driver, DRV_NAME);
2829 strcpy(info->version, DRV_VERSION);
2830 strcpy(info->fw_version, "N/A");
2831 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
2832 }
2833
2834 static const struct sky2_stat {
2835 char name[ETH_GSTRING_LEN];
2836 u16 offset;
2837 } sky2_stats[] = {
2838 { "tx_bytes", GM_TXO_OK_HI },
2839 { "rx_bytes", GM_RXO_OK_HI },
2840 { "tx_broadcast", GM_TXF_BC_OK },
2841 { "rx_broadcast", GM_RXF_BC_OK },
2842 { "tx_multicast", GM_TXF_MC_OK },
2843 { "rx_multicast", GM_RXF_MC_OK },
2844 { "tx_unicast", GM_TXF_UC_OK },
2845 { "rx_unicast", GM_RXF_UC_OK },
2846 { "tx_mac_pause", GM_TXF_MPAUSE },
2847 { "rx_mac_pause", GM_RXF_MPAUSE },
2848 { "collisions", GM_TXF_COL },
2849 { "late_collision",GM_TXF_LAT_COL },
2850 { "aborted", GM_TXF_ABO_COL },
2851 { "single_collisions", GM_TXF_SNG_COL },
2852 { "multi_collisions", GM_TXF_MUL_COL },
2853
2854 { "rx_short", GM_RXF_SHT },
2855 { "rx_runt", GM_RXE_FRAG },
2856 { "rx_64_byte_packets", GM_RXF_64B },
2857 { "rx_65_to_127_byte_packets", GM_RXF_127B },
2858 { "rx_128_to_255_byte_packets", GM_RXF_255B },
2859 { "rx_256_to_511_byte_packets", GM_RXF_511B },
2860 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
2861 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
2862 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
2863 { "rx_too_long", GM_RXF_LNG_ERR },
2864 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
2865 { "rx_jabber", GM_RXF_JAB_PKT },
2866 { "rx_fcs_error", GM_RXF_FCS_ERR },
2867
2868 { "tx_64_byte_packets", GM_TXF_64B },
2869 { "tx_65_to_127_byte_packets", GM_TXF_127B },
2870 { "tx_128_to_255_byte_packets", GM_TXF_255B },
2871 { "tx_256_to_511_byte_packets", GM_TXF_511B },
2872 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
2873 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
2874 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
2875 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
2876 };
2877
2878 static u32 sky2_get_rx_csum(struct net_device *dev)
2879 {
2880 struct sky2_port *sky2 = netdev_priv(dev);
2881
2882 return sky2->rx_csum;
2883 }
2884
2885 static int sky2_set_rx_csum(struct net_device *dev, u32 data)
2886 {
2887 struct sky2_port *sky2 = netdev_priv(dev);
2888
2889 sky2->rx_csum = data;
2890
2891 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2892 data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
2893
2894 return 0;
2895 }
2896
2897 static u32 sky2_get_msglevel(struct net_device *netdev)
2898 {
2899 struct sky2_port *sky2 = netdev_priv(netdev);
2900 return sky2->msg_enable;
2901 }
2902
2903 static int sky2_nway_reset(struct net_device *dev)
2904 {
2905 struct sky2_port *sky2 = netdev_priv(dev);
2906
2907 if (!netif_running(dev) || sky2->autoneg != AUTONEG_ENABLE)
2908 return -EINVAL;
2909
2910 sky2_phy_reinit(sky2);
2911
2912 return 0;
2913 }
2914
2915 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
2916 {
2917 struct sky2_hw *hw = sky2->hw;
2918 unsigned port = sky2->port;
2919 int i;
2920
2921 data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
2922 | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
2923 data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
2924 | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
2925
2926 for (i = 2; i < count; i++)
2927 data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
2928 }
2929
2930 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
2931 {
2932 struct sky2_port *sky2 = netdev_priv(netdev);
2933 sky2->msg_enable = value;
2934 }
2935
2936 static int sky2_get_stats_count(struct net_device *dev)
2937 {
2938 return ARRAY_SIZE(sky2_stats);
2939 }
2940
2941 static void sky2_get_ethtool_stats(struct net_device *dev,
2942 struct ethtool_stats *stats, u64 * data)
2943 {
2944 struct sky2_port *sky2 = netdev_priv(dev);
2945
2946 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
2947 }
2948
2949 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
2950 {
2951 int i;
2952
2953 switch (stringset) {
2954 case ETH_SS_STATS:
2955 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
2956 memcpy(data + i * ETH_GSTRING_LEN,
2957 sky2_stats[i].name, ETH_GSTRING_LEN);
2958 break;
2959 }
2960 }
2961
2962 static struct net_device_stats *sky2_get_stats(struct net_device *dev)
2963 {
2964 struct sky2_port *sky2 = netdev_priv(dev);
2965 return &sky2->net_stats;
2966 }
2967
2968 static int sky2_set_mac_address(struct net_device *dev, void *p)
2969 {
2970 struct sky2_port *sky2 = netdev_priv(dev);
2971 struct sky2_hw *hw = sky2->hw;
2972 unsigned port = sky2->port;
2973 const struct sockaddr *addr = p;
2974
2975 if (!is_valid_ether_addr(addr->sa_data))
2976 return -EADDRNOTAVAIL;
2977
2978 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
2979 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
2980 dev->dev_addr, ETH_ALEN);
2981 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
2982 dev->dev_addr, ETH_ALEN);
2983
2984 /* virtual address for data */
2985 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
2986
2987 /* physical address: used for pause frames */
2988 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
2989
2990 return 0;
2991 }
2992
2993 static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
2994 {
2995 u32 bit;
2996
2997 bit = ether_crc(ETH_ALEN, addr) & 63;
2998 filter[bit >> 3] |= 1 << (bit & 7);
2999 }
3000
3001 static void sky2_set_multicast(struct net_device *dev)
3002 {
3003 struct sky2_port *sky2 = netdev_priv(dev);
3004 struct sky2_hw *hw = sky2->hw;
3005 unsigned port = sky2->port;
3006 struct dev_mc_list *list = dev->mc_list;
3007 u16 reg;
3008 u8 filter[8];
3009 int rx_pause;
3010 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3011
3012 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3013 memset(filter, 0, sizeof(filter));
3014
3015 reg = gma_read16(hw, port, GM_RX_CTRL);
3016 reg |= GM_RXCR_UCF_ENA;
3017
3018 if (dev->flags & IFF_PROMISC) /* promiscuous */
3019 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3020 else if (dev->flags & IFF_ALLMULTI)
3021 memset(filter, 0xff, sizeof(filter));
3022 else if (dev->mc_count == 0 && !rx_pause)
3023 reg &= ~GM_RXCR_MCF_ENA;
3024 else {
3025 int i;
3026 reg |= GM_RXCR_MCF_ENA;
3027
3028 if (rx_pause)
3029 sky2_add_filter(filter, pause_mc_addr);
3030
3031 for (i = 0; list && i < dev->mc_count; i++, list = list->next)
3032 sky2_add_filter(filter, list->dmi_addr);
3033 }
3034
3035 gma_write16(hw, port, GM_MC_ADDR_H1,
3036 (u16) filter[0] | ((u16) filter[1] << 8));
3037 gma_write16(hw, port, GM_MC_ADDR_H2,
3038 (u16) filter[2] | ((u16) filter[3] << 8));
3039 gma_write16(hw, port, GM_MC_ADDR_H3,
3040 (u16) filter[4] | ((u16) filter[5] << 8));
3041 gma_write16(hw, port, GM_MC_ADDR_H4,
3042 (u16) filter[6] | ((u16) filter[7] << 8));
3043
3044 gma_write16(hw, port, GM_RX_CTRL, reg);
3045 }
3046
3047 /* Can have one global because blinking is controlled by
3048 * ethtool and that is always under RTNL mutex
3049 */
3050 static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
3051 {
3052 u16 pg;
3053
3054 switch (hw->chip_id) {
3055 case CHIP_ID_YUKON_XL:
3056 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3057 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3058 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3059 on ? (PHY_M_LEDC_LOS_CTRL(1) |
3060 PHY_M_LEDC_INIT_CTRL(7) |
3061 PHY_M_LEDC_STA1_CTRL(7) |
3062 PHY_M_LEDC_STA0_CTRL(7))
3063 : 0);
3064
3065 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3066 break;
3067
3068 default:
3069 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
3070 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3071 on ? PHY_M_LED_ALL : 0);
3072 }
3073 }
3074
3075 /* blink LED's for finding board */
3076 static int sky2_phys_id(struct net_device *dev, u32 data)
3077 {
3078 struct sky2_port *sky2 = netdev_priv(dev);
3079 struct sky2_hw *hw = sky2->hw;
3080 unsigned port = sky2->port;
3081 u16 ledctrl, ledover = 0;
3082 long ms;
3083 int interrupted;
3084 int onoff = 1;
3085
3086 if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
3087 ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
3088 else
3089 ms = data * 1000;
3090
3091 /* save initial values */
3092 spin_lock_bh(&sky2->phy_lock);
3093 if (hw->chip_id == CHIP_ID_YUKON_XL) {
3094 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3095 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3096 ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
3097 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3098 } else {
3099 ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
3100 ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
3101 }
3102
3103 interrupted = 0;
3104 while (!interrupted && ms > 0) {
3105 sky2_led(hw, port, onoff);
3106 onoff = !onoff;
3107
3108 spin_unlock_bh(&sky2->phy_lock);
3109 interrupted = msleep_interruptible(250);
3110 spin_lock_bh(&sky2->phy_lock);
3111
3112 ms -= 250;
3113 }
3114
3115 /* resume regularly scheduled programming */
3116 if (hw->chip_id == CHIP_ID_YUKON_XL) {
3117 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3118 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3119 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
3120 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3121 } else {
3122 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
3123 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
3124 }
3125 spin_unlock_bh(&sky2->phy_lock);
3126
3127 return 0;
3128 }
3129
3130 static void sky2_get_pauseparam(struct net_device *dev,
3131 struct ethtool_pauseparam *ecmd)
3132 {
3133 struct sky2_port *sky2 = netdev_priv(dev);
3134
3135 switch (sky2->flow_mode) {
3136 case FC_NONE:
3137 ecmd->tx_pause = ecmd->rx_pause = 0;
3138 break;
3139 case FC_TX:
3140 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
3141 break;
3142 case FC_RX:
3143 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
3144 break;
3145 case FC_BOTH:
3146 ecmd->tx_pause = ecmd->rx_pause = 1;
3147 }
3148
3149 ecmd->autoneg = sky2->autoneg;
3150 }
3151
3152 static int sky2_set_pauseparam(struct net_device *dev,
3153 struct ethtool_pauseparam *ecmd)
3154 {
3155 struct sky2_port *sky2 = netdev_priv(dev);
3156
3157 sky2->autoneg = ecmd->autoneg;
3158 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
3159
3160 if (netif_running(dev))
3161 sky2_phy_reinit(sky2);
3162
3163 return 0;
3164 }
3165
3166 static int sky2_get_coalesce(struct net_device *dev,
3167 struct ethtool_coalesce *ecmd)
3168 {
3169 struct sky2_port *sky2 = netdev_priv(dev);
3170 struct sky2_hw *hw = sky2->hw;
3171
3172 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
3173 ecmd->tx_coalesce_usecs = 0;
3174 else {
3175 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
3176 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
3177 }
3178 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
3179
3180 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
3181 ecmd->rx_coalesce_usecs = 0;
3182 else {
3183 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
3184 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
3185 }
3186 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
3187
3188 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
3189 ecmd->rx_coalesce_usecs_irq = 0;
3190 else {
3191 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
3192 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
3193 }
3194
3195 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
3196
3197 return 0;
3198 }
3199
3200 /* Note: this affect both ports */
3201 static int sky2_set_coalesce(struct net_device *dev,
3202 struct ethtool_coalesce *ecmd)
3203 {
3204 struct sky2_port *sky2 = netdev_priv(dev);
3205 struct sky2_hw *hw = sky2->hw;
3206 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
3207
3208 if (ecmd->tx_coalesce_usecs > tmax ||
3209 ecmd->rx_coalesce_usecs > tmax ||
3210 ecmd->rx_coalesce_usecs_irq > tmax)
3211 return -EINVAL;
3212
3213 if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
3214 return -EINVAL;
3215 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
3216 return -EINVAL;
3217 if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
3218 return -EINVAL;
3219
3220 if (ecmd->tx_coalesce_usecs == 0)
3221 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
3222 else {
3223 sky2_write32(hw, STAT_TX_TIMER_INI,
3224 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
3225 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3226 }
3227 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
3228
3229 if (ecmd->rx_coalesce_usecs == 0)
3230 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
3231 else {
3232 sky2_write32(hw, STAT_LEV_TIMER_INI,
3233 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
3234 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3235 }
3236 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
3237
3238 if (ecmd->rx_coalesce_usecs_irq == 0)
3239 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
3240 else {
3241 sky2_write32(hw, STAT_ISR_TIMER_INI,
3242 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
3243 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3244 }
3245 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
3246 return 0;
3247 }
3248
3249 static void sky2_get_ringparam(struct net_device *dev,
3250 struct ethtool_ringparam *ering)
3251 {
3252 struct sky2_port *sky2 = netdev_priv(dev);
3253
3254 ering->rx_max_pending = RX_MAX_PENDING;
3255 ering->rx_mini_max_pending = 0;
3256 ering->rx_jumbo_max_pending = 0;
3257 ering->tx_max_pending = TX_RING_SIZE - 1;
3258
3259 ering->rx_pending = sky2->rx_pending;
3260 ering->rx_mini_pending = 0;
3261 ering->rx_jumbo_pending = 0;
3262 ering->tx_pending = sky2->tx_pending;
3263 }
3264
3265 static int sky2_set_ringparam(struct net_device *dev,
3266 struct ethtool_ringparam *ering)
3267 {
3268 struct sky2_port *sky2 = netdev_priv(dev);
3269 int err = 0;
3270
3271 if (ering->rx_pending > RX_MAX_PENDING ||
3272 ering->rx_pending < 8 ||
3273 ering->tx_pending < MAX_SKB_TX_LE ||
3274 ering->tx_pending > TX_RING_SIZE - 1)
3275 return -EINVAL;
3276
3277 if (netif_running(dev))
3278 sky2_down(dev);
3279
3280 sky2->rx_pending = ering->rx_pending;
3281 sky2->tx_pending = ering->tx_pending;
3282
3283 if (netif_running(dev)) {
3284 err = sky2_up(dev);
3285 if (err)
3286 dev_close(dev);
3287 else
3288 sky2_set_multicast(dev);
3289 }
3290
3291 return err;
3292 }
3293
3294 static int sky2_get_regs_len(struct net_device *dev)
3295 {
3296 return 0x4000;
3297 }
3298
3299 /*
3300 * Returns copy of control register region
3301 * Note: access to the RAM address register set will cause timeouts.
3302 */
3303 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
3304 void *p)
3305 {
3306 const struct sky2_port *sky2 = netdev_priv(dev);
3307 const void __iomem *io = sky2->hw->regs;
3308
3309 BUG_ON(regs->len < B3_RI_WTO_R1);
3310 regs->version = 1;
3311 memset(p, 0, regs->len);
3312
3313 memcpy_fromio(p, io, B3_RAM_ADDR);
3314
3315 memcpy_fromio(p + B3_RI_WTO_R1,
3316 io + B3_RI_WTO_R1,
3317 regs->len - B3_RI_WTO_R1);
3318 }
3319
3320 static const struct ethtool_ops sky2_ethtool_ops = {
3321 .get_settings = sky2_get_settings,
3322 .set_settings = sky2_set_settings,
3323 .get_drvinfo = sky2_get_drvinfo,
3324 .get_wol = sky2_get_wol,
3325 .set_wol = sky2_set_wol,
3326 .get_msglevel = sky2_get_msglevel,
3327 .set_msglevel = sky2_set_msglevel,
3328 .nway_reset = sky2_nway_reset,
3329 .get_regs_len = sky2_get_regs_len,
3330 .get_regs = sky2_get_regs,
3331 .get_link = ethtool_op_get_link,
3332 .get_sg = ethtool_op_get_sg,
3333 .set_sg = ethtool_op_set_sg,
3334 .get_tx_csum = ethtool_op_get_tx_csum,
3335 .set_tx_csum = ethtool_op_set_tx_csum,
3336 .get_tso = ethtool_op_get_tso,
3337 .set_tso = ethtool_op_set_tso,
3338 .get_rx_csum = sky2_get_rx_csum,
3339 .set_rx_csum = sky2_set_rx_csum,
3340 .get_strings = sky2_get_strings,
3341 .get_coalesce = sky2_get_coalesce,
3342 .set_coalesce = sky2_set_coalesce,
3343 .get_ringparam = sky2_get_ringparam,
3344 .set_ringparam = sky2_set_ringparam,
3345 .get_pauseparam = sky2_get_pauseparam,
3346 .set_pauseparam = sky2_set_pauseparam,
3347 .phys_id = sky2_phys_id,
3348 .get_stats_count = sky2_get_stats_count,
3349 .get_ethtool_stats = sky2_get_ethtool_stats,
3350 .get_perm_addr = ethtool_op_get_perm_addr,
3351 };
3352
3353 /* Initialize network device */
3354 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
3355 unsigned port,
3356 int highmem, int wol)
3357 {
3358 struct sky2_port *sky2;
3359 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
3360
3361 if (!dev) {
3362 dev_err(&hw->pdev->dev, "etherdev alloc failed");
3363 return NULL;
3364 }
3365
3366 SET_MODULE_OWNER(dev);
3367 SET_NETDEV_DEV(dev, &hw->pdev->dev);
3368 dev->irq = hw->pdev->irq;
3369 dev->open = sky2_up;
3370 dev->stop = sky2_down;
3371 dev->do_ioctl = sky2_ioctl;
3372 dev->hard_start_xmit = sky2_xmit_frame;
3373 dev->get_stats = sky2_get_stats;
3374 dev->set_multicast_list = sky2_set_multicast;
3375 dev->set_mac_address = sky2_set_mac_address;
3376 dev->change_mtu = sky2_change_mtu;
3377 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
3378 dev->tx_timeout = sky2_tx_timeout;
3379 dev->watchdog_timeo = TX_WATCHDOG;
3380 if (port == 0)
3381 dev->poll = sky2_poll;
3382 dev->weight = NAPI_WEIGHT;
3383 #ifdef CONFIG_NET_POLL_CONTROLLER
3384 /* Network console (only works on port 0)
3385 * because netpoll makes assumptions about NAPI
3386 */
3387 if (port == 0)
3388 dev->poll_controller = sky2_netpoll;
3389 #endif
3390
3391 sky2 = netdev_priv(dev);
3392 sky2->netdev = dev;
3393 sky2->hw = hw;
3394 sky2->msg_enable = netif_msg_init(debug, default_msg);
3395
3396 /* Auto speed and flow control */
3397 sky2->autoneg = AUTONEG_ENABLE;
3398 sky2->flow_mode = FC_BOTH;
3399
3400 sky2->duplex = -1;
3401 sky2->speed = -1;
3402 sky2->advertising = sky2_supported_modes(hw);
3403 sky2->rx_csum = 1;
3404 sky2->wol = wol;
3405
3406 spin_lock_init(&sky2->phy_lock);
3407 sky2->tx_pending = TX_DEF_PENDING;
3408 sky2->rx_pending = RX_DEF_PENDING;
3409
3410 hw->dev[port] = dev;
3411
3412 sky2->port = port;
3413
3414 dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
3415 if (highmem)
3416 dev->features |= NETIF_F_HIGHDMA;
3417
3418 #ifdef SKY2_VLAN_TAG_USED
3419 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
3420 dev->vlan_rx_register = sky2_vlan_rx_register;
3421 dev->vlan_rx_kill_vid = sky2_vlan_rx_kill_vid;
3422 #endif
3423
3424 /* read the mac address */
3425 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
3426 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
3427
3428 /* device is off until link detection */
3429 netif_carrier_off(dev);
3430 netif_stop_queue(dev);
3431
3432 return dev;
3433 }
3434
3435 static void __devinit sky2_show_addr(struct net_device *dev)
3436 {
3437 const struct sky2_port *sky2 = netdev_priv(dev);
3438
3439 if (netif_msg_probe(sky2))
3440 printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n",
3441 dev->name,
3442 dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
3443 dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
3444 }
3445
3446 /* Handle software interrupt used during MSI test */
3447 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
3448 {
3449 struct sky2_hw *hw = dev_id;
3450 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
3451
3452 if (status == 0)
3453 return IRQ_NONE;
3454
3455 if (status & Y2_IS_IRQ_SW) {
3456 hw->msi = 1;
3457 wake_up(&hw->msi_wait);
3458 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
3459 }
3460 sky2_write32(hw, B0_Y2_SP_ICR, 2);
3461
3462 return IRQ_HANDLED;
3463 }
3464
3465 /* Test interrupt path by forcing a a software IRQ */
3466 static int __devinit sky2_test_msi(struct sky2_hw *hw)
3467 {
3468 struct pci_dev *pdev = hw->pdev;
3469 int err;
3470
3471 init_waitqueue_head (&hw->msi_wait);
3472
3473 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
3474
3475 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
3476 if (err) {
3477 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
3478 return err;
3479 }
3480
3481 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
3482 sky2_read8(hw, B0_CTST);
3483
3484 wait_event_timeout(hw->msi_wait, hw->msi, HZ/10);
3485
3486 if (!hw->msi) {
3487 /* MSI test failed, go back to INTx mode */
3488 dev_info(&pdev->dev, "No interrupt generated using MSI, "
3489 "switching to INTx mode.\n");
3490
3491 err = -EOPNOTSUPP;
3492 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
3493 }
3494
3495 sky2_write32(hw, B0_IMSK, 0);
3496 sky2_read32(hw, B0_IMSK);
3497
3498 free_irq(pdev->irq, hw);
3499
3500 return err;
3501 }
3502
3503 static int __devinit pci_wake_enabled(struct pci_dev *dev)
3504 {
3505 int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
3506 u16 value;
3507
3508 if (!pm)
3509 return 0;
3510 if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
3511 return 0;
3512 return value & PCI_PM_CTRL_PME_ENABLE;
3513 }
3514
3515 static int __devinit sky2_probe(struct pci_dev *pdev,
3516 const struct pci_device_id *ent)
3517 {
3518 struct net_device *dev;
3519 struct sky2_hw *hw;
3520 int err, using_dac = 0, wol_default;
3521
3522 err = pci_enable_device(pdev);
3523 if (err) {
3524 dev_err(&pdev->dev, "cannot enable PCI device\n");
3525 goto err_out;
3526 }
3527
3528 err = pci_request_regions(pdev, DRV_NAME);
3529 if (err) {
3530 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
3531 goto err_out;
3532 }
3533
3534 pci_set_master(pdev);
3535
3536 if (sizeof(dma_addr_t) > sizeof(u32) &&
3537 !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
3538 using_dac = 1;
3539 err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3540 if (err < 0) {
3541 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
3542 "for consistent allocations\n");
3543 goto err_out_free_regions;
3544 }
3545 } else {
3546 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3547 if (err) {
3548 dev_err(&pdev->dev, "no usable DMA configuration\n");
3549 goto err_out_free_regions;
3550 }
3551 }
3552
3553 wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
3554
3555 err = -ENOMEM;
3556 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
3557 if (!hw) {
3558 dev_err(&pdev->dev, "cannot allocate hardware struct\n");
3559 goto err_out_free_regions;
3560 }
3561
3562 hw->pdev = pdev;
3563
3564 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
3565 if (!hw->regs) {
3566 dev_err(&pdev->dev, "cannot map device registers\n");
3567 goto err_out_free_hw;
3568 }
3569
3570 #ifdef __BIG_ENDIAN
3571 /* The sk98lin vendor driver uses hardware byte swapping but
3572 * this driver uses software swapping.
3573 */
3574 {
3575 u32 reg;
3576 reg = sky2_pci_read32(hw, PCI_DEV_REG2);
3577 reg &= ~PCI_REV_DESC;
3578 sky2_pci_write32(hw, PCI_DEV_REG2, reg);
3579 }
3580 #endif
3581
3582 /* ring for status responses */
3583 hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
3584 &hw->st_dma);
3585 if (!hw->st_le)
3586 goto err_out_iounmap;
3587
3588 err = sky2_init(hw);
3589 if (err)
3590 goto err_out_iounmap;
3591
3592 dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
3593 DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
3594 pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
3595 hw->chip_id, hw->chip_rev);
3596
3597 sky2_reset(hw);
3598
3599 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
3600 if (!dev) {
3601 err = -ENOMEM;
3602 goto err_out_free_pci;
3603 }
3604
3605 if (!disable_msi && pci_enable_msi(pdev) == 0) {
3606 err = sky2_test_msi(hw);
3607 if (err == -EOPNOTSUPP)
3608 pci_disable_msi(pdev);
3609 else if (err)
3610 goto err_out_free_netdev;
3611 }
3612
3613 err = register_netdev(dev);
3614 if (err) {
3615 dev_err(&pdev->dev, "cannot register net device\n");
3616 goto err_out_free_netdev;
3617 }
3618
3619 err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
3620 dev->name, hw);
3621 if (err) {
3622 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
3623 goto err_out_unregister;
3624 }
3625 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3626
3627 sky2_show_addr(dev);
3628
3629 if (hw->ports > 1) {
3630 struct net_device *dev1;
3631
3632 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
3633 if (!dev1)
3634 dev_warn(&pdev->dev, "allocation for second device failed\n");
3635 else if ((err = register_netdev(dev1))) {
3636 dev_warn(&pdev->dev,
3637 "register of second port failed (%d)\n", err);
3638 hw->dev[1] = NULL;
3639 free_netdev(dev1);
3640 } else
3641 sky2_show_addr(dev1);
3642 }
3643
3644 setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
3645 INIT_WORK(&hw->restart_work, sky2_restart);
3646
3647 sky2_idle_start(hw);
3648
3649 pci_set_drvdata(pdev, hw);
3650
3651 return 0;
3652
3653 err_out_unregister:
3654 if (hw->msi)
3655 pci_disable_msi(pdev);
3656 unregister_netdev(dev);
3657 err_out_free_netdev:
3658 free_netdev(dev);
3659 err_out_free_pci:
3660 sky2_write8(hw, B0_CTST, CS_RST_SET);
3661 pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
3662 err_out_iounmap:
3663 iounmap(hw->regs);
3664 err_out_free_hw:
3665 kfree(hw);
3666 err_out_free_regions:
3667 pci_release_regions(pdev);
3668 pci_disable_device(pdev);
3669 err_out:
3670 return err;
3671 }
3672
3673 static void __devexit sky2_remove(struct pci_dev *pdev)
3674 {
3675 struct sky2_hw *hw = pci_get_drvdata(pdev);
3676 struct net_device *dev0, *dev1;
3677
3678 if (!hw)
3679 return;
3680
3681 del_timer_sync(&hw->idle_timer);
3682
3683 flush_scheduled_work();
3684
3685 sky2_write32(hw, B0_IMSK, 0);
3686 synchronize_irq(hw->pdev->irq);
3687
3688 dev0 = hw->dev[0];
3689 dev1 = hw->dev[1];
3690 if (dev1)
3691 unregister_netdev(dev1);
3692 unregister_netdev(dev0);
3693
3694 sky2_power_aux(hw);
3695
3696 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
3697 sky2_write8(hw, B0_CTST, CS_RST_SET);
3698 sky2_read8(hw, B0_CTST);
3699
3700 free_irq(pdev->irq, hw);
3701 if (hw->msi)
3702 pci_disable_msi(pdev);
3703 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
3704 pci_release_regions(pdev);
3705 pci_disable_device(pdev);
3706
3707 if (dev1)
3708 free_netdev(dev1);
3709 free_netdev(dev0);
3710 iounmap(hw->regs);
3711 kfree(hw);
3712
3713 pci_set_drvdata(pdev, NULL);
3714 }
3715
3716 #ifdef CONFIG_PM
3717 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
3718 {
3719 struct sky2_hw *hw = pci_get_drvdata(pdev);
3720 int i, wol = 0;
3721
3722 del_timer_sync(&hw->idle_timer);
3723 netif_poll_disable(hw->dev[0]);
3724
3725 for (i = 0; i < hw->ports; i++) {
3726 struct net_device *dev = hw->dev[i];
3727 struct sky2_port *sky2 = netdev_priv(dev);
3728
3729 if (netif_running(dev))
3730 sky2_down(dev);
3731
3732 if (sky2->wol)
3733 sky2_wol_init(sky2);
3734
3735 wol |= sky2->wol;
3736 }
3737
3738 sky2_write32(hw, B0_IMSK, 0);
3739 sky2_power_aux(hw);
3740
3741 pci_save_state(pdev);
3742 pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
3743 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3744
3745 return 0;
3746 }
3747
3748 static int sky2_resume(struct pci_dev *pdev)
3749 {
3750 struct sky2_hw *hw = pci_get_drvdata(pdev);
3751 int i, err;
3752
3753 err = pci_set_power_state(pdev, PCI_D0);
3754 if (err)
3755 goto out;
3756
3757 err = pci_restore_state(pdev);
3758 if (err)
3759 goto out;
3760
3761 pci_enable_wake(pdev, PCI_D0, 0);
3762 sky2_reset(hw);
3763
3764 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3765
3766 for (i = 0; i < hw->ports; i++) {
3767 struct net_device *dev = hw->dev[i];
3768 if (netif_running(dev)) {
3769 err = sky2_up(dev);
3770 if (err) {
3771 printk(KERN_ERR PFX "%s: could not up: %d\n",
3772 dev->name, err);
3773 dev_close(dev);
3774 goto out;
3775 }
3776 }
3777 }
3778
3779 netif_poll_enable(hw->dev[0]);
3780 sky2_idle_start(hw);
3781 return 0;
3782 out:
3783 dev_err(&pdev->dev, "resume failed (%d)\n", err);
3784 pci_disable_device(pdev);
3785 return err;
3786 }
3787 #endif
3788
3789 static void sky2_shutdown(struct pci_dev *pdev)
3790 {
3791 struct sky2_hw *hw = pci_get_drvdata(pdev);
3792 int i, wol = 0;
3793
3794 del_timer_sync(&hw->idle_timer);
3795 netif_poll_disable(hw->dev[0]);
3796
3797 for (i = 0; i < hw->ports; i++) {
3798 struct net_device *dev = hw->dev[i];
3799 struct sky2_port *sky2 = netdev_priv(dev);
3800
3801 if (sky2->wol) {
3802 wol = 1;
3803 sky2_wol_init(sky2);
3804 }
3805 }
3806
3807 if (wol)
3808 sky2_power_aux(hw);
3809
3810 pci_enable_wake(pdev, PCI_D3hot, wol);
3811 pci_enable_wake(pdev, PCI_D3cold, wol);
3812
3813 pci_disable_device(pdev);
3814 pci_set_power_state(pdev, PCI_D3hot);
3815
3816 }
3817
3818 static struct pci_driver sky2_driver = {
3819 .name = DRV_NAME,
3820 .id_table = sky2_id_table,
3821 .probe = sky2_probe,
3822 .remove = __devexit_p(sky2_remove),
3823 #ifdef CONFIG_PM
3824 .suspend = sky2_suspend,
3825 .resume = sky2_resume,
3826 #endif
3827 .shutdown = sky2_shutdown,
3828 };
3829
3830 static int __init sky2_init_module(void)
3831 {
3832 return pci_register_driver(&sky2_driver);
3833 }
3834
3835 static void __exit sky2_cleanup_module(void)
3836 {
3837 pci_unregister_driver(&sky2_driver);
3838 }
3839
3840 module_init(sky2_init_module);
3841 module_exit(sky2_cleanup_module);
3842
3843 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
3844 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
3845 MODULE_LICENSE("GPL");
3846 MODULE_VERSION(DRV_VERSION);
x86 "subsystem" repository