2 * RZ1000/1001 driver based upon
4 * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
5 * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
6 * Principal Author: mlord@pobox.com (Mark Lord)
8 * See linux/MAINTAINERS for address of current maintainer.
10 * This file provides support for disabling the buggy read-ahead
11 * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/blkdev.h>
19 #include <linux/delay.h>
20 #include <scsi/scsi_host.h>
21 #include <linux/libata.h>
23 #define DRV_NAME "pata_rz1000"
24 #define DRV_VERSION "0.2.4"
28 * rz1000_set_mode - mode setting function
30 * @unused: returned device on set_mode failure
32 * Use a non standard set_mode function. We don't want to be tuned. We
33 * would prefer to be BIOS generic but for the fact our hardware is
37 static int rz1000_set_mode(struct ata_link
*link
, struct ata_device
**unused
)
39 struct ata_device
*dev
;
41 ata_link_for_each_dev(dev
, link
) {
42 if (ata_dev_enabled(dev
)) {
43 /* We don't really care */
44 dev
->pio_mode
= XFER_PIO_0
;
45 dev
->xfer_mode
= XFER_PIO_0
;
46 dev
->xfer_shift
= ATA_SHIFT_PIO
;
47 dev
->flags
|= ATA_DFLAG_PIO
;
48 ata_dev_printk(dev
, KERN_INFO
, "configured for PIO\n");
55 static struct scsi_host_template rz1000_sht
= {
56 ATA_PIO_SHT(DRV_NAME
),
59 static struct ata_port_operations rz1000_port_ops
= {
60 .set_mode
= rz1000_set_mode
,
62 .tf_load
= ata_tf_load
,
63 .tf_read
= ata_tf_read
,
64 .check_status
= ata_check_status
,
65 .exec_command
= ata_exec_command
,
66 .dev_select
= ata_std_dev_select
,
68 .qc_prep
= ata_qc_prep
,
69 .qc_issue
= ata_qc_issue_prot
,
71 .data_xfer
= ata_data_xfer
,
73 .freeze
= ata_bmdma_freeze
,
74 .thaw
= ata_bmdma_thaw
,
75 .error_handler
= ata_bmdma_error_handler
,
76 .post_internal_cmd
= ata_bmdma_post_internal_cmd
,
77 .cable_detect
= ata_cable_40wire
,
79 .irq_handler
= ata_interrupt
,
80 .irq_clear
= ata_noop_irq_clear
,
83 .port_start
= ata_sff_port_start
,
86 static int rz1000_fifo_disable(struct pci_dev
*pdev
)
89 /* Be exceptionally paranoid as we must be sure to apply the fix */
90 if (pci_read_config_word(pdev
, 0x40, ®
) != 0)
93 if (pci_write_config_word(pdev
, 0x40, reg
) != 0)
95 printk(KERN_INFO DRV_NAME
": disabled chipset readahead.\n");
100 * rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
101 * @pdev: PCI device to register
102 * @ent: Entry in rz1000_pci_tbl matching with @pdev
104 * Configure an RZ1000 interface. This doesn't require much special
105 * handling except that we *MUST* kill the chipset readahead or the
106 * user may experience data corruption.
109 static int rz1000_init_one (struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
111 static int printed_version
;
112 static const struct ata_port_info info
= {
114 .flags
= ATA_FLAG_SLAVE_POSS
,
116 .port_ops
= &rz1000_port_ops
118 const struct ata_port_info
*ppi
[] = { &info
, NULL
};
120 if (!printed_version
++)
121 printk(KERN_DEBUG DRV_NAME
" version " DRV_VERSION
"\n");
123 if (rz1000_fifo_disable(pdev
) == 0)
124 return ata_pci_init_one(pdev
, ppi
);
126 printk(KERN_ERR DRV_NAME
": failed to disable read-ahead on chipset..\n");
127 /* Not safe to use so skip */
132 static int rz1000_reinit_one(struct pci_dev
*pdev
)
134 /* If this fails on resume (which is a "cant happen" case), we
135 must stop as any progress risks data loss */
136 if (rz1000_fifo_disable(pdev
))
137 panic("rz1000 fifo");
138 return ata_pci_device_resume(pdev
);
142 static const struct pci_device_id pata_rz1000
[] = {
143 { PCI_VDEVICE(PCTECH
, PCI_DEVICE_ID_PCTECH_RZ1000
), },
144 { PCI_VDEVICE(PCTECH
, PCI_DEVICE_ID_PCTECH_RZ1001
), },
149 static struct pci_driver rz1000_pci_driver
= {
151 .id_table
= pata_rz1000
,
152 .probe
= rz1000_init_one
,
153 .remove
= ata_pci_remove_one
,
155 .suspend
= ata_pci_device_suspend
,
156 .resume
= rz1000_reinit_one
,
160 static int __init
rz1000_init(void)
162 return pci_register_driver(&rz1000_pci_driver
);
165 static void __exit
rz1000_exit(void)
167 pci_unregister_driver(&rz1000_pci_driver
);
170 MODULE_AUTHOR("Alan Cox");
171 MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
172 MODULE_LICENSE("GPL");
173 MODULE_DEVICE_TABLE(pci
, pata_rz1000
);
174 MODULE_VERSION(DRV_VERSION
);
176 module_init(rz1000_init
);
177 module_exit(rz1000_exit
);