5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/config.h>
29 #include <linux/delay.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
43 static void boot_msp34xx(struct bttv
*btv
, int pin
);
44 static void boot_bt832(struct bttv
*btv
);
45 static void hauppauge_eeprom(struct bttv
*btv
);
46 static void avermedia_eeprom(struct bttv
*btv
);
47 static void osprey_eeprom(struct bttv
*btv
);
48 static void modtec_eeprom(struct bttv
*btv
);
49 static void init_PXC200(struct bttv
*btv
);
50 static void init_RTV24(struct bttv
*btv
);
52 static void winview_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
53 static void lt9415_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
54 static void avermedia_tvphone_audio(struct bttv
*btv
, struct video_audio
*v
,
56 static void avermedia_tv_stereo_audio(struct bttv
*btv
, struct video_audio
*v
,
58 static void terratv_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
59 static void gvbctv3pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
60 static void gvbctv5pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
61 static void winfast2000_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
62 static void pvbt878p9b_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
63 static void fv2000s_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
64 static void windvr_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
65 static void adtvk503_audio(struct bttv
*btv
, struct video_audio
*v
, int set
);
66 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
);
67 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
);
68 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
);
69 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
);
70 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
);
72 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
);
74 static void picolo_tetra_muxsel(struct bttv
*btv
, unsigned int input
);
75 static void picolo_tetra_init(struct bttv
*btv
);
77 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
);
78 static void tibetCS16_init(struct bttv
*btv
);
80 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
);
81 static void kodicom4400r_init(struct bttv
*btv
);
83 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
);
84 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
);
86 static int terratec_active_radio_upgrade(struct bttv
*btv
);
87 static int tea5757_read(struct bttv
*btv
);
88 static int tea5757_write(struct bttv
*btv
, int value
);
89 static void identify_by_eeprom(struct bttv
*btv
,
90 unsigned char eeprom_data
[256]);
91 static int __devinit
pvr_boot(struct bttv
*btv
);
93 /* config variables */
94 static unsigned int triton1
=0;
95 static unsigned int vsfx
=0;
96 static unsigned int latency
= UNSET
;
99 static unsigned int card
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
100 static unsigned int pll
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
101 static unsigned int tuner
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
102 static unsigned int svhs
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
103 static unsigned int remote
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
104 static struct bttv
*master
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = NULL
};
106 static unsigned int autoload
= 1;
108 static unsigned int autoload
= 0;
110 static unsigned int gpiomask
= UNSET
;
111 static unsigned int audioall
= UNSET
;
112 static unsigned int audiomux
[5] = { [ 0 ... 4 ] = UNSET
};
115 module_param(triton1
, int, 0444);
116 module_param(vsfx
, int, 0444);
117 module_param(no_overlay
, int, 0444);
118 module_param(latency
, int, 0444);
119 module_param(gpiomask
, int, 0444);
120 module_param(audioall
, int, 0444);
121 module_param(autoload
, int, 0444);
123 module_param_array(card
, int, NULL
, 0444);
124 module_param_array(pll
, int, NULL
, 0444);
125 module_param_array(tuner
, int, NULL
, 0444);
126 module_param_array(svhs
, int, NULL
, 0444);
127 module_param_array(remote
, int, NULL
, 0444);
128 module_param_array(audiomux
, int, NULL
, 0444);
130 MODULE_PARM_DESC(triton1
,"set ETBF pci config bit "
131 "[enable bug compatibility for triton1 + others]");
132 MODULE_PARM_DESC(vsfx
,"set VSFX pci config bit "
133 "[yet another chipset flaw workaround]");
134 MODULE_PARM_DESC(latency
,"pci latency timer");
135 MODULE_PARM_DESC(card
,"specify TV/grabber card model, see CARDLIST file for a list");
136 MODULE_PARM_DESC(pll
,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
137 MODULE_PARM_DESC(tuner
,"specify installed tuner type");
138 MODULE_PARM_DESC(autoload
,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 /* ----------------------------------------------------------------------- */
141 /* list of card IDs for bt878+ cards */
147 } cards
[] __devinitdata
= {
148 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878
, "Hauppauge WinTV" },
149 { 0x39000070, BTTV_BOARD_HAUPPAUGE878
, "Hauppauge WinTV-D" },
150 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR
, "Hauppauge WinTV/PVR" },
151 { 0xff000070, BTTV_BOARD_OSPREY1x0
, "Osprey-100" },
152 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID
,"Osprey-200" },
153 { 0xff020070, BTTV_BOARD_OSPREY500
, "Osprey-500" },
154 { 0xff030070, BTTV_BOARD_OSPREY2000
, "Osprey-2000" },
155 { 0xff040070, BTTV_BOARD_OSPREY540
, "Osprey-540" },
157 { 0x00011002, BTTV_BOARD_ATI_TVWONDER
, "ATI TV Wonder" },
158 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE
,"ATI TV Wonder/VE" },
160 { 0x6606107d, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
161 { 0x6607107d, BTTV_BOARD_WINFASTVC100
, "Leadtek WinFast VC 100" },
162 { 0x6609107d, BTTV_BOARD_WINFAST2000
, "Leadtek TV 2000 XP" },
163 { 0x263610b4, BTTV_BOARD_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
164 { 0x264510b4, BTTV_BOARD_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
165 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI
, "I-O Data Co. GV-BCTV3/PCI" },
166 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI
, "I-O Data Co. GV-BCTV4/PCI" },
167 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
168 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
170 { 0x001211bd, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV" },
171 /* some cards ship with byteswapped IDs ... */
172 { 0x1200bd11, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV [bswap]" },
173 { 0xff00bd11, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV [bswap]" },
174 /* this seems to happen as well ... */
175 { 0xff1211bd, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV" },
177 { 0x3000121a, BTTV_BOARD_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
178 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM
, "3Dfx VoodooTV FM/ VoodooTV 200" },
179 { 0x3060121a, BTTV_BOARD_STB2
, "3Dfx VoodooTV 100/ STB OEM" },
181 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063
, "(Askey Magic/others) TView99 CPH06x" },
182 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063
, "CPH06X TView99-Card" },
183 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH05x" },
184 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
185 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061
, "Askey CPH050" },
186 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061
, "TView 99 (CPH061)" },
187 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS
, "Phoebe TV Master (CPH060)" },
189 { 0x00011461, BTTV_BOARD_AVPHONE98
, "AVerMedia TVPhone98" },
190 { 0x00021461, BTTV_BOARD_AVERMEDIA98
, "AVermedia TVCapture 98" },
191 { 0x00031461, BTTV_BOARD_AVPHONE98
, "AVerMedia TVPhone98" },
192 { 0x00041461, BTTV_BOARD_AVERMEDIA98
, "AVerMedia TVCapture 98" },
193 { 0x03001461, BTTV_BOARD_AVERMEDIA98
, "VDOMATE TV TUNER CARD" },
195 { 0x1117153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Philips PAL B/G)" },
196 { 0x1118153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Temic PAL B/G)" },
197 { 0x1119153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Philips PAL I)" },
198 { 0x111a153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Temic PAL I)" },
200 { 0x1123153b, BTTV_BOARD_TERRATVRADIO
, "Terratec TV Radio+" },
201 { 0x1127153b, BTTV_BOARD_TERRATV
, "Terratec TV+ (V1.05)" },
202 /* clashes with FlyVideo
203 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
204 { 0x1134153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (LR102)" },
205 { 0x1135153b, BTTV_BOARD_TERRATVALUER
, "Terratec TValue Radio" }, /* LR102 */
206 { 0x5018153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue" }, /* ?? */
207 { 0xff3b153b, BTTV_BOARD_TERRATVALUER
, "Terratec TValue Radio" }, /* ?? */
209 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
210 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
211 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
212 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
213 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
215 { 0x1430aa00, BTTV_BOARD_PV143
, "Provideo PV143A" },
216 { 0x1431aa00, BTTV_BOARD_PV143
, "Provideo PV143B" },
217 { 0x1432aa00, BTTV_BOARD_PV143
, "Provideo PV143C" },
218 { 0x1433aa00, BTTV_BOARD_PV143
, "Provideo PV143D" },
219 { 0x1433aa03, BTTV_BOARD_PV143
, "Security Eyes" },
221 { 0x1460aa00, BTTV_BOARD_PV150
, "Provideo PV150A-1" },
222 { 0x1461aa01, BTTV_BOARD_PV150
, "Provideo PV150A-2" },
223 { 0x1462aa02, BTTV_BOARD_PV150
, "Provideo PV150A-3" },
224 { 0x1463aa03, BTTV_BOARD_PV150
, "Provideo PV150A-4" },
226 { 0x1464aa04, BTTV_BOARD_PV150
, "Provideo PV150B-1" },
227 { 0x1465aa05, BTTV_BOARD_PV150
, "Provideo PV150B-2" },
228 { 0x1466aa06, BTTV_BOARD_PV150
, "Provideo PV150B-3" },
229 { 0x1467aa07, BTTV_BOARD_PV150
, "Provideo PV150B-4" },
231 { 0xa132ff00, BTTV_BOARD_IVC100
, "IVC-100" },
232 { 0xa1550000, BTTV_BOARD_IVC200
, "IVC-200" },
233 { 0xa1550001, BTTV_BOARD_IVC200
, "IVC-200" },
234 { 0xa1550002, BTTV_BOARD_IVC200
, "IVC-200" },
235 { 0xa1550003, BTTV_BOARD_IVC200
, "IVC-200" },
236 { 0xa1550100, BTTV_BOARD_IVC200
, "IVC-200G" },
237 { 0xa1550101, BTTV_BOARD_IVC200
, "IVC-200G" },
238 { 0xa1550102, BTTV_BOARD_IVC200
, "IVC-200G" },
239 { 0xa1550103, BTTV_BOARD_IVC200
, "IVC-200G" },
240 { 0xa182ff00, BTTV_BOARD_IVC120
, "IVC-120G" },
241 { 0xa182ff01, BTTV_BOARD_IVC120
, "IVC-120G" },
242 { 0xa182ff02, BTTV_BOARD_IVC120
, "IVC-120G" },
243 { 0xa182ff03, BTTV_BOARD_IVC120
, "IVC-120G" },
244 { 0xa182ff04, BTTV_BOARD_IVC120
, "IVC-120G" },
245 { 0xa182ff05, BTTV_BOARD_IVC120
, "IVC-120G" },
246 { 0xa182ff06, BTTV_BOARD_IVC120
, "IVC-120G" },
247 { 0xa182ff07, BTTV_BOARD_IVC120
, "IVC-120G" },
248 { 0xa182ff08, BTTV_BOARD_IVC120
, "IVC-120G" },
249 { 0xa182ff09, BTTV_BOARD_IVC120
, "IVC-120G" },
250 { 0xa182ff0a, BTTV_BOARD_IVC120
, "IVC-120G" },
251 { 0xa182ff0b, BTTV_BOARD_IVC120
, "IVC-120G" },
252 { 0xa182ff0c, BTTV_BOARD_IVC120
, "IVC-120G" },
253 { 0xa182ff0d, BTTV_BOARD_IVC120
, "IVC-120G" },
254 { 0xa182ff0e, BTTV_BOARD_IVC120
, "IVC-120G" },
255 { 0xa182ff0f, BTTV_BOARD_IVC120
, "IVC-120G" },
257 { 0x41424344, BTTV_BOARD_GRANDTEC
, "GrandTec Multi Capture" },
258 { 0x01020304, BTTV_BOARD_XGUARD
, "Grandtec Grand X-Guard" },
260 { 0x18501851, BTTV_BOARD_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
261 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
262 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ
, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
263 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW
, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
264 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM
, "Lifeview FlyVideo 98 LR50 Rev Q" },
265 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98
, "Lifeview Flyvideo 98" },
267 { 0x010115cb, BTTV_BOARD_GMV1
, "AG GMV1" },
268 { 0x010114c7, BTTV_BOARD_MODTEC_205
, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
270 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878
, "STB ???" },
271 { 0x217d6606, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
272 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
273 { 0x03116000, BTTV_BOARD_SENSORAY311
, "Sensoray 311" },
274 { 0x00790e11, BTTV_BOARD_WINDVR
, "Canopus WinDVR PCI" },
275 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX
, "Face to Face Tvmax" },
276 { 0x20007063, BTTV_BOARD_PC_HDTV
, "pcHDTV HD-2000 TV"},
277 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100
, "SIMUS GVC1100" },
278 { 0x146caa0c, BTTV_BOARD_PV951
, "ituner spectra8" },
279 { 0x200a1295, BTTV_BOARD_PXC200
, "ImageNation PXC200A" },
281 { 0x40111554, BTTV_BOARD_PV_BT878P_9B
, "Prolink Pixelview PV-BT" },
282 { 0x17de0a01, BTTV_BOARD_KWORLD
, "Mecer TV/FM/Video Tuner" },
284 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #1" },
285 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #2" },
286 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #3" },
287 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #4" },
289 { 0x15409511, BTTV_BOARD_ACORP_Y878F
, "Acorp Y878F" },
291 /* likely broken, vendor id doesn't match the other magic views ...
292 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
294 /* DVB cards (using pci function .1 for mpeg data xfer) */
295 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV
, "Nebula Electronics DigiTV" },
296 { 0x07611461, BTTV_BOARD_AVDVBT_761
, "AverMedia AverTV DVB-T 761" },
297 { 0x001c11bd, BTTV_BOARD_PINNACLESAT
, "Pinnacle PCTV Sat" },
298 { 0x002611bd, BTTV_BOARD_TWINHAN_DST
, "Pinnacle PCTV SAT CI" },
299 { 0x00011822, BTTV_BOARD_TWINHAN_DST
, "Twinhan VisionPlus DVB" },
300 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST
, "ChainTech digitop DST-1000 DVB-S" },
301 { 0x07711461, BTTV_BOARD_AVDVBT_771
, "AVermedia AverTV DVB-T 771" },
302 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE
, "DViCO FusionHDTV DVB-T Lite" },
303 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
, "DViCO FusionHDTV 5 Lite" },
308 /* ----------------------------------------------------------------------- */
309 /* array with description for bt848 / bt878 tv/grabber cards */
311 struct tvcard bttv_tvcards
[] = {
312 /* ---- card 0x00 ---------------------------------- */
313 [BTTV_BOARD_UNKNOWN
] = {
314 .name
= " *** UNKNOWN/GENERIC *** ",
319 .muxsel
= { 2, 3, 1, 0},
321 .tuner_addr
= ADDR_UNSET
,
323 [BTTV_BOARD_MIRO
] = {
330 .muxsel
= { 2, 3, 1, 1},
331 .audiomux
= { 2, 0, 0, 0, 10},
334 .tuner_addr
= ADDR_UNSET
,
336 [BTTV_BOARD_HAUPPAUGE
] = {
337 .name
= "Hauppauge (bt848)",
343 .muxsel
= { 2, 3, 1, 1},
344 .audiomux
= { 0, 1, 2, 3, 4},
347 .tuner_addr
= ADDR_UNSET
,
350 .name
= "STB, Gateway P/N 6000699 (bt848)",
356 .muxsel
= { 2, 3, 1, 1},
357 .audiomux
= { 4, 0, 2, 3, 1},
360 .tuner_type
= TUNER_PHILIPS_NTSC
,
361 .tuner_addr
= ADDR_UNSET
,
366 /* ---- card 0x04 ---------------------------------- */
367 [BTTV_BOARD_INTEL
] = {
368 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
374 .muxsel
= { 2, 3, 1, 1},
378 .tuner_addr
= ADDR_UNSET
,
380 [BTTV_BOARD_DIAMOND
] = {
381 .name
= "Diamond DTV2000",
387 .muxsel
= { 2, 3, 1, 0},
388 .audiomux
= { 0, 1, 0, 1, 3},
391 .tuner_addr
= ADDR_UNSET
,
393 [BTTV_BOARD_AVERMEDIA
] = {
394 .name
= "AVerMedia TVPhone",
399 .muxsel
= { 2, 3, 1, 1},
401 .audiomux
= { 0x0c, 0x04, 0x08, 0x04, 0},
402 /* 0x04 for some cards ?? */
405 .tuner_addr
= ADDR_UNSET
,
406 .audio_hook
= avermedia_tvphone_audio
,
409 [BTTV_BOARD_MATRIX_VISION
] = {
410 .name
= "MATRIX-Vision MV-Delta",
416 .muxsel
= { 2, 3, 1, 0, 0},
420 .tuner_addr
= ADDR_UNSET
,
423 /* ---- card 0x08 ---------------------------------- */
424 [BTTV_BOARD_FLYVIDEO
] = {
425 .name
= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
431 .muxsel
= { 2, 3, 1, 1},
432 .audiomux
= { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
436 .tuner_addr
= ADDR_UNSET
,
438 [BTTV_BOARD_TURBOTV
] = {
439 .name
= "IMS/IXmicro TurboTV",
445 .muxsel
= { 2, 3, 1, 1},
446 .audiomux
= { 1, 1, 2, 3, 0},
449 .tuner_type
= TUNER_TEMIC_PAL
,
450 .tuner_addr
= ADDR_UNSET
,
452 [BTTV_BOARD_HAUPPAUGE878
] = {
453 .name
= "Hauppauge (bt878)",
458 .gpiomask
= 0x0f, /* old: 7 */
459 .muxsel
= { 2, 0, 1, 1},
460 .audiomux
= { 0, 1, 2, 3, 4},
464 .tuner_addr
= ADDR_UNSET
,
466 [BTTV_BOARD_MIROPRO
] = {
467 .name
= "MIRO PCTV pro",
473 .muxsel
= { 2, 3, 1, 1},
474 .audiomux
= { 0x20001,0x10001, 0, 0,10},
477 .tuner_addr
= ADDR_UNSET
,
480 /* ---- card 0x0c ---------------------------------- */
481 [BTTV_BOARD_ADSTECH_TV
] = {
482 .name
= "ADS Technologies Channel Surfer TV (bt848)",
488 .muxsel
= { 2, 3, 1, 1},
489 .audiomux
= { 13, 14, 11, 7, 0, 0},
492 .tuner_addr
= ADDR_UNSET
,
494 [BTTV_BOARD_AVERMEDIA98
] = {
495 .name
= "AVerMedia TVCapture 98",
501 .muxsel
= { 2, 3, 1, 1},
502 .audiomux
= { 13, 14, 11, 7, 0, 0},
506 .tuner_type
= TUNER_PHILIPS_PAL
,
507 .tuner_addr
= ADDR_UNSET
,
508 .audio_hook
= avermedia_tv_stereo_audio
,
511 .name
= "Aimslab Video Highway Xtreme (VHX)",
517 .muxsel
= { 2, 3, 1, 1},
518 .audiomux
= { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
522 .tuner_addr
= ADDR_UNSET
,
524 [BTTV_BOARD_ZOLTRIX
] = {
525 .name
= "Zoltrix TV-Max",
531 .muxsel
= { 2, 3, 1, 1},
532 .audiomux
= {0 , 0, 1 , 0, 10},
535 .tuner_addr
= ADDR_UNSET
,
538 /* ---- card 0x10 ---------------------------------- */
539 [BTTV_BOARD_PIXVIEWPLAYTV
] = {
540 .name
= "Prolink Pixelview PlayTV (bt878)",
545 .gpiomask
= 0x01fe00,
546 .muxsel
= { 2, 3, 1, 1},
549 .audiomux
= { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
551 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
552 .audiomux
= { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
558 [BTTV_BOARD_WINVIEW_601
] = {
559 .name
= "Leadtek WinView 601",
564 .gpiomask
= 0x8300f8,
565 .muxsel
= { 2, 3, 1, 1,0},
566 .audiomux
= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
569 .tuner_addr
= ADDR_UNSET
,
570 .audio_hook
= winview_audio
,
573 [BTTV_BOARD_AVEC_INTERCAP
] = {
574 .name
= "AVEC Intercapture",
580 .muxsel
= {2, 3, 1, 1},
581 .audiomux
= {1, 0, 0, 0, 0},
584 .tuner_addr
= ADDR_UNSET
,
586 [BTTV_BOARD_LIFE_FLYKIT
] = {
587 .name
= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
592 .gpiomask
= 0x8dff00,
593 .muxsel
= { 2, 3, 1, 1},
597 .tuner_addr
= ADDR_UNSET
,
600 /* ---- card 0x14 ---------------------------------- */
601 [BTTV_BOARD_CEI_RAFFLES
] = {
602 .name
= "CEI Raffles Card",
607 .muxsel
= {2, 3, 1, 1},
609 .tuner_addr
= ADDR_UNSET
,
611 [BTTV_BOARD_CONFERENCETV
] = {
612 .name
= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
614 .audio_inputs
= 2, /* tuner, line in */
618 .muxsel
= { 2, 3, 1, 1},
619 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
621 .tuner_type
= TUNER_PHILIPS_PAL_I
,
622 .tuner_addr
= ADDR_UNSET
,
624 [BTTV_BOARD_PHOEBE_TVMAS
] = {
625 .name
= "Askey CPH050/ Phoebe Tv Master + FM",
631 .muxsel
= { 2, 3, 1, 1},
632 .audiomux
= {0, 1, 0x800, 0x400, 0xc00, 0},
636 .tuner_addr
= ADDR_UNSET
,
638 [BTTV_BOARD_MODTEC_205
] = {
639 .name
= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
645 .muxsel
= { 2, 3, -1 },
646 .digital_mode
= DIGITAL_MODE_CAMERA
,
647 .audiomux
= { 0, 0, 0, 0, 0 },
650 .tuner_type
= TUNER_ALPS_TSBB5_PAL_I
,
651 .tuner_addr
= ADDR_UNSET
,
654 /* ---- card 0x18 ---------------------------------- */
655 [BTTV_BOARD_MAGICTVIEW061
] = {
656 .name
= "Askey CPH05X/06X (bt878) [many vendors]",
662 .muxsel
= { 2, 3, 1, 1},
663 .audiomux
= {0x400, 0x400, 0x400, 0x400, 0xc00},
667 .tuner_addr
= ADDR_UNSET
,
670 [BTTV_BOARD_VOBIS_BOOSTAR
] = {
671 .name
= "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
676 .gpiomask
= 0x1f0fff,
677 .muxsel
= { 2, 3, 1, 1},
678 .audiomux
= { 0x20000, 0x30000, 0x10000, 0, 0x40000},
680 .tuner_type
= TUNER_PHILIPS_PAL
,
681 .tuner_addr
= ADDR_UNSET
,
682 .audio_hook
= terratv_audio
,
684 [BTTV_BOARD_HAUPPAUG_WCAM
] = {
685 .name
= "Hauppauge WinCam newer (bt878)",
691 .muxsel
= { 2, 0, 1, 1},
692 .audiomux
= { 0, 1, 2, 3, 4},
695 .tuner_addr
= ADDR_UNSET
,
697 [BTTV_BOARD_MAXI
] = {
698 .name
= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
704 .muxsel
= { 2, 3, 1, 1},
705 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
707 .tuner_type
= TUNER_PHILIPS_SECAM
,
708 .tuner_addr
= ADDR_UNSET
,
711 /* ---- card 0x1c ---------------------------------- */
712 [BTTV_BOARD_TERRATV
] = {
713 .name
= "Terratec TerraTV+ Version 1.1 (bt878)",
718 .gpiomask
= 0x1f0fff,
719 .muxsel
= { 2, 3, 1, 1},
720 .audiomux
= { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
722 .tuner_type
= TUNER_PHILIPS_PAL
,
723 .tuner_addr
= ADDR_UNSET
,
724 .audio_hook
= terratv_audio
,
726 External 20 pin connector (for Active Radio Upgrade board)
732 gpio05: om5610-stereo
736 gpio09+10: nIOR, nSEL ?? (bt878)
740 gpio16: u2-A0 (1st 4052bt)
743 gpio19: u4-A0 (2nd 4052)
747 00000 : Cdrom (internal audio input)
748 10000 : ext. Video audio input
757 [BTTV_BOARD_PXC200
] = {
758 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
759 .name
= "Imagenation PXC200",
763 .svhs
= 1, /* was: 4 */
765 .muxsel
= { 2, 3, 1, 0, 0},
769 .tuner_addr
= ADDR_UNSET
,
770 .muxsel_hook
= PXC200_muxsel
,
773 [BTTV_BOARD_FLYVIDEO_98
] = {
774 .name
= "Lifeview FlyVideo 98 LR50",
779 .gpiomask
= 0x1800, /* 0x8dfe00 */
780 .muxsel
= { 2, 3, 1, 1},
781 .audiomux
= { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
784 .tuner_addr
= ADDR_UNSET
,
786 [BTTV_BOARD_IPROTV
] = {
787 .name
= "Formac iProTV, Formac ProTV I (bt848)",
793 .muxsel
= { 2, 3, 1, 1},
794 .audiomux
= { 1, 0, 0, 0, 0 },
796 .tuner_type
= TUNER_PHILIPS_PAL
,
797 .tuner_addr
= ADDR_UNSET
,
800 /* ---- card 0x20 ---------------------------------- */
801 [BTTV_BOARD_INTEL_C_S_PCI
] = {
802 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
808 .muxsel
= { 2, 3, 1, 1},
812 .tuner_addr
= ADDR_UNSET
,
814 [BTTV_BOARD_TERRATVALUE
] = {
815 .name
= "Terratec TerraTValue Version Bt878",
820 .gpiomask
= 0xffff00,
821 .muxsel
= { 2, 3, 1, 1},
822 .audiomux
= { 0x500, 0, 0x300, 0x900, 0x900},
825 .tuner_type
= TUNER_PHILIPS_PAL
,
826 .tuner_addr
= ADDR_UNSET
,
828 [BTTV_BOARD_WINFAST2000
] = {
829 .name
= "Leadtek WinFast 2000/ WinFast 2000 XP",
834 .muxsel
= { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
836 .gpiomask
= 0xc33000,
837 .audiomux
= { 0x422000,0x1000,0x0000,0x620000,0x800000 },
839 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
840 .gpiomask
= 0xb33000,
841 .audiomux
= { 0x122000,0x1000,0x0000,0x620000,0x800000 },
843 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
844 gpio23 -- hef4052:nEnable (0x800000)
847 0x0000: external audio
851 Note: There exists another variant "Winfast 2000" with tv stereo !?
852 Note: eeprom only contains FF and pci subsystem id 107d:6606
857 .tuner_type
= 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
858 .tuner_addr
= ADDR_UNSET
,
859 .audio_hook
= winfast2000_audio
,
862 [BTTV_BOARD_CHRONOS_VS2
] = {
863 .name
= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
869 .muxsel
= { 2, 3, 1, 1},
870 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800},
873 .tuner_addr
= ADDR_UNSET
,
876 /* ---- card 0x24 ---------------------------------- */
877 [BTTV_BOARD_TYPHOON_TVIEW
] = {
878 .name
= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
884 .muxsel
= { 2, 3, 1, 1},
885 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
888 .tuner_addr
= ADDR_UNSET
,
891 [BTTV_BOARD_PXELVWPLTVPRO
] = {
892 .name
= "Prolink PixelView PlayTV pro",
898 .muxsel
= { 2, 3, 1, 1 },
899 .audiomux
= { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
903 .tuner_addr
= ADDR_UNSET
,
905 [BTTV_BOARD_MAGICTVIEW063
] = {
906 .name
= "Askey CPH06X TView99",
911 .gpiomask
= 0x551e00,
912 .muxsel
= { 2, 3, 1, 0},
913 .audiomux
= { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
917 .tuner_addr
= ADDR_UNSET
,
920 [BTTV_BOARD_PINNACLE
] = {
921 .name
= "Pinnacle PCTV Studio/Rave",
926 .gpiomask
= 0x03000F,
927 .muxsel
= { 2, 3, 1, 1},
928 .audiomux
= { 2, 0xd0001, 0, 0, 1},
932 .tuner_addr
= ADDR_UNSET
,
935 /* ---- card 0x28 ---------------------------------- */
936 [BTTV_BOARD_STB2
] = {
937 .name
= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
943 .muxsel
= { 2, 3, 1, 1},
944 .audiomux
= { 4, 0, 2, 3, 1},
947 .tuner_type
= TUNER_PHILIPS_NTSC
,
948 .tuner_addr
= ADDR_UNSET
,
952 [BTTV_BOARD_AVPHONE98
] = {
953 .name
= "AVerMedia TVPhone 98",
959 .muxsel
= { 2, 3, 1, 1},
960 .audiomux
= { 13, 4, 11, 7, 0, 0},
964 .tuner_addr
= ADDR_UNSET
,
966 .audio_hook
= avermedia_tvphone_audio
,
968 [BTTV_BOARD_PV951
] = {
969 .name
= "ProVideo PV951", /* pic16c54 */
975 .muxsel
= { 2, 3, 1, 1},
976 .audiomux
= { 0, 0, 0, 0, 0},
981 .tuner_addr
= ADDR_UNSET
,
983 [BTTV_BOARD_ONAIR_TV
] = {
984 .name
= "Little OnAir TV",
990 .muxsel
= {2, 3, 1, 1},
991 .audiomux
= {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
994 .tuner_addr
= ADDR_UNSET
,
997 /* ---- card 0x2c ---------------------------------- */
998 [BTTV_BOARD_SIGMA_TVII_FM
] = {
999 .name
= "Sigma TVII-FM",
1005 .muxsel
= {2, 3, 1, 1},
1006 .audiomux
= {1, 1, 0, 2, 3},
1010 .tuner_addr
= ADDR_UNSET
,
1012 [BTTV_BOARD_MATRIX_VISION2
] = {
1013 .name
= "MATRIX-Vision MV-Delta 2",
1019 .muxsel
= { 2, 3, 1, 0, 0},
1024 .tuner_addr
= ADDR_UNSET
,
1026 [BTTV_BOARD_ZOLTRIX_GENIE
] = {
1027 .name
= "Zoltrix Genie TV/FM",
1032 .gpiomask
= 0xbcf03f,
1033 .muxsel
= { 2, 3, 1, 1},
1034 .audiomux
= { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
1038 .tuner_addr
= ADDR_UNSET
,
1040 [BTTV_BOARD_TERRATVRADIO
] = {
1041 .name
= "Terratec TV/Radio+",
1046 .gpiomask
= 0x70000,
1047 .muxsel
= { 2, 3, 1, 1},
1048 .audiomux
= { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
1053 .tuner_addr
= ADDR_UNSET
,
1057 /* ---- card 0x30 ---------------------------------- */
1058 [BTTV_BOARD_DYNALINK
] = {
1059 .name
= "Askey CPH03x/ Dynalink Magic TView",
1065 .muxsel
= { 2, 3, 1, 1},
1066 .audiomux
= {2,0,0,0,1},
1070 .tuner_addr
= ADDR_UNSET
,
1072 [BTTV_BOARD_GVBCTV3PCI
] = {
1073 .name
= "IODATA GV-BCTV3/PCI",
1078 .gpiomask
= 0x010f00,
1079 .muxsel
= {2, 3, 0, 0},
1080 .audiomux
= {0x10000, 0, 0x10000, 0, 0, 0},
1083 .tuner_type
= TUNER_ALPS_TSHC6_NTSC
,
1084 .tuner_addr
= ADDR_UNSET
,
1085 .audio_hook
= gvbctv3pci_audio
,
1087 [BTTV_BOARD_PXELVWPLTVPAK
] = {
1088 .name
= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1093 .gpiomask
= 0xAA0000,
1094 .muxsel
= { 2,3,1,1,-1 },
1095 .digital_mode
= DIGITAL_MODE_CAMERA
,
1096 .audiomux
= { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
1099 .tuner_type
= TUNER_PHILIPS_PAL_I
,
1100 .tuner_addr
= ADDR_UNSET
,
1102 /* GPIO wiring: (different from Rev.4C !)
1103 GPIO17: U4.A0 (first hef4052bt)
1105 GPIO20: U5.A1 (second hef4052bt)
1107 GPIO22: BT832 Reset Line
1108 GPIO23: A5,A0, U5,nEN
1109 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1112 [BTTV_BOARD_EAGLE
] = {
1113 .name
= "Eagle Wireless Capricorn2 (bt878A)",
1119 .muxsel
= { 2, 0, 1, 1},
1120 .audiomux
= { 0, 1, 2, 3, 4},
1122 .tuner_type
= -1 /* TUNER_ALPS_TMDH2_NTSC */,
1123 .tuner_addr
= ADDR_UNSET
,
1126 /* ---- card 0x34 ---------------------------------- */
1127 [BTTV_BOARD_PINNACLEPRO
] = {
1128 /* David Härdeman <david@2gen.com> */
1129 .name
= "Pinnacle PCTV Studio Pro",
1134 .gpiomask
= 0x03000F,
1135 .muxsel
= { 2, 3, 1, 1},
1136 .audiomux
= { 1, 0xd0001, 0, 0, 10},
1137 /* sound path (5 sources):
1138 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1141 2= Mono TV sound from Tuner
1143 MUX2 (mask 0x30000):
1145 1= FM stereo Radio from Tuner */
1149 .tuner_addr
= ADDR_UNSET
,
1151 [BTTV_BOARD_TVIEW_RDS_FM
] = {
1152 /* Claas Langbehn <claas@bigfoot.com>,
1153 Sven Grothklags <sven@upb.de> */
1154 .name
= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1160 .muxsel
= { 2, 3, 1, 1},
1161 .audiomux
= { 0, 0, 0x10, 8, 4 },
1164 .tuner_type
= TUNER_PHILIPS_PAL
,
1165 .tuner_addr
= ADDR_UNSET
,
1168 [BTTV_BOARD_LIFETEC_9415
] = {
1169 /* Tim Röstermundt <rosterm@uni-muenster.de>
1170 in de.comp.os.unix.linux.hardware:
1171 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1172 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1173 options tuner type=5 */
1174 .name
= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1180 .muxsel
= { 2, 3, 1, 1},
1181 .audiomux
= { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1182 /* For cards with tda9820/tda9821:
1183 0x0000: Tuner normal stereo
1184 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1185 0x0880: Tuner A2 stereo */
1188 .tuner_addr
= ADDR_UNSET
,
1190 [BTTV_BOARD_BESTBUY_EASYTV
] = {
1191 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1192 old Easy TV BT848 version (model CPH031) */
1193 .name
= "Askey CPH031/ BESTBUY Easy TV",
1199 .muxsel
= { 2, 3, 1, 0},
1200 .audiomux
= { 2, 0, 0, 0, 10},
1203 .tuner_type
= TUNER_TEMIC_PAL
,
1204 .tuner_addr
= ADDR_UNSET
,
1207 /* ---- card 0x38 ---------------------------------- */
1208 [BTTV_BOARD_FLYVIDEO_98FM
] = {
1209 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1210 .name
= "Lifeview FlyVideo 98FM LR50",
1216 .muxsel
= { 2, 3, 1, 1},
1217 .audiomux
= { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1220 .tuner_addr
= ADDR_UNSET
,
1222 /* This is the ultimate cheapo capture card
1223 * just a BT848A on a small PCB!
1224 * Steve Hosgood <steve@equiinet.com> */
1225 [BTTV_BOARD_GRANDTEC
] = {
1226 .name
= "GrandTec 'Grand Video Capture' (Bt848)",
1238 .tuner_addr
= ADDR_UNSET
,
1240 [BTTV_BOARD_ASKEY_CPH060
] = {
1241 /* Daniel Herrington <daniel.herrington@home.com> */
1242 .name
= "Askey CPH060/ Phoebe TV Master Only (No FM)",
1248 .muxsel
= { 2, 3, 1, 1},
1249 .audiomux
= { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1252 .tuner_type
= TUNER_TEMIC_4036FY5_NTSC
,
1253 .tuner_addr
= ADDR_UNSET
,
1255 [BTTV_BOARD_ASKEY_CPH03X
] = {
1256 /* Matti Mottus <mottus@physic.ut.ee> */
1257 .name
= "Askey CPH03x TV Capturer",
1262 .gpiomask
= 0x03000F,
1263 .muxsel
= { 2, 3, 1, 0},
1264 .audiomux
= { 2,0,0,0,1 },
1267 .tuner_addr
= ADDR_UNSET
,
1270 /* ---- card 0x3c ---------------------------------- */
1271 [BTTV_BOARD_MM100PCTV
] = {
1272 /* Philip Blundell <philb@gnu.org> */
1273 .name
= "Modular Technology MM100PCTV",
1279 .muxsel
= { 2, 3, 1, 1},
1280 .audiomux
= { 2, 0, 0, 1, 8},
1282 .tuner_type
= TUNER_TEMIC_PAL
,
1283 .tuner_addr
= ADDR_UNSET
,
1285 [BTTV_BOARD_GMV1
] = {
1286 /* Adrian Cox <adrian@humboldt.co.uk */
1287 .name
= "AG Electronics GMV1",
1299 .tuner_addr
= ADDR_UNSET
,
1301 [BTTV_BOARD_BESTBUY_EASYTV2
] = {
1302 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1303 new Easy TV BT878 version (model CPH061)
1304 special thanks to Informatica Mieres for providing the card */
1305 .name
= "Askey CPH061/ BESTBUY Easy TV (bt878)",
1311 .muxsel
= { 2, 3, 1, 0},
1312 .audiomux
= { 1, 0, 4, 4, 9},
1315 .tuner_type
= TUNER_PHILIPS_PAL
,
1316 .tuner_addr
= ADDR_UNSET
,
1318 [BTTV_BOARD_ATI_TVWONDER
] = {
1319 /* Lukas Gebauer <geby@volny.cz> */
1320 .name
= "ATI TV-Wonder",
1326 .muxsel
= { 2, 3, 1, 0 },
1327 .audiomux
= { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1329 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1330 .tuner_addr
= ADDR_UNSET
,
1333 /* ---- card 0x40 ---------------------------------- */
1334 [BTTV_BOARD_ATI_TVWONDERVE
] = {
1335 /* Lukas Gebauer <geby@volny.cz> */
1336 .name
= "ATI TV-Wonder VE",
1342 .muxsel
= { 2, 3, 0, 1},
1343 .audiomux
= { 0, 0, 1, 0, 0},
1346 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1347 .tuner_addr
= ADDR_UNSET
,
1349 [BTTV_BOARD_FLYVIDEO2000
] = {
1350 /* DeeJay <deejay@westel900.net (2000S) */
1351 .name
= "Lifeview FlyVideo 2000S LR90",
1357 .muxsel
= { 2, 3, 0, 1},
1358 /* Radio changed from 1e80 to 0x800 to make
1359 FlyVideo2000S in .hu happy (gm)*/
1360 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1361 .audiomux
= { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1362 .audio_hook
= fv2000s_audio
,
1368 .tuner_addr
= ADDR_UNSET
,
1370 [BTTV_BOARD_TERRATVALUER
] = {
1371 .name
= "Terratec TValueRadio",
1376 .gpiomask
= 0xffff00,
1377 .muxsel
= { 2, 3, 1, 1},
1378 .audiomux
= { 0x500, 0x500, 0x300, 0x900, 0x900},
1381 .tuner_type
= TUNER_PHILIPS_PAL
,
1382 .tuner_addr
= ADDR_UNSET
,
1385 [BTTV_BOARD_GVBCTV4PCI
] = {
1386 /* TANAKA Kei <peg00625@nifty.com> */
1387 .name
= "IODATA GV-BCTV4/PCI",
1392 .gpiomask
= 0x010f00,
1393 .muxsel
= {2, 3, 0, 0},
1394 .audiomux
= {0x10000, 0, 0x10000, 0, 0, 0},
1397 .tuner_type
= TUNER_SHARP_2U5JF5540_NTSC
,
1398 .tuner_addr
= ADDR_UNSET
,
1399 .audio_hook
= gvbctv3pci_audio
,
1402 /* ---- card 0x44 ---------------------------------- */
1403 [BTTV_BOARD_VOODOOTV_FM
] = {
1404 .name
= "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1405 /* try "insmod msp3400 simple=0" if you have
1406 * sound problems with this card. */
1411 .gpiomask
= 0x4f8a00,
1412 /* 0x100000: 1=MSP enabled (0=disable again)
1413 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1414 .audiomux
= {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1415 /* tvtuner, radio, external,internal, mute, stereo
1416 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1417 .muxsel
= { 2, 3 ,0 ,1},
1418 .tuner_type
= TUNER_MT2032
,
1419 .tuner_addr
= ADDR_UNSET
,
1423 [BTTV_BOARD_AIMMS
] = {
1424 /* Philip Blundell <pb@nexus.co.uk> */
1425 .name
= "Active Imaging AIMMS",
1430 .tuner_addr
= ADDR_UNSET
,
1435 [BTTV_BOARD_PV_BT878P_PLUS
] = {
1436 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1437 .name
= "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1443 .muxsel
= { 2, 3, 1, 1},
1444 .audiomux
= { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
1448 .tuner_addr
= ADDR_UNSET
,
1451 GPIO0: U4.A0 (hef4052bt)
1453 GPIO2: U4.A1 (second hef4052bt)
1454 GPIO3: U4.nEN, U5.A0, A5.nEN
1458 [BTTV_BOARD_FLYVIDEO98EZ
] = {
1459 .name
= "Lifeview FlyVideo 98EZ (capture only) LR51",
1464 .muxsel
= { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1467 .tuner_type
= UNSET
,
1468 .tuner_addr
= ADDR_UNSET
,
1471 /* ---- card 0x48 ---------------------------------- */
1472 [BTTV_BOARD_PV_BT878P_9B
] = {
1473 /* Dariusz Kowalewski <darekk@automex.pl> */
1474 .name
= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1480 .muxsel
= { 2, 3, 1, 1 },
1481 .audiomux
= { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1487 .tuner_addr
= ADDR_UNSET
,
1488 .audio_hook
= pvbt878p9b_audio
, /* Note: not all cards have stereo */
1489 .has_radio
= 1, /* Note: not all cards have radio */
1496 GPIO20,22,23: R30,R29,R28
1499 [BTTV_BOARD_SENSORAY311
] = {
1500 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1501 /* you must jumper JP5 for the card to work */
1502 .name
= "Sensoray 311",
1508 .muxsel
= { 2, 3, 1, 0, 0},
1512 .tuner_addr
= ADDR_UNSET
,
1514 [BTTV_BOARD_RV605
] = {
1515 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1516 .name
= "RemoteVision MX (RV605)",
1522 .gpiomask2
= 0x07ff,
1523 .muxsel
= { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1524 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1528 .tuner_addr
= ADDR_UNSET
,
1529 .muxsel_hook
= rv605_muxsel
,
1531 [BTTV_BOARD_POWERCLR_MTV878
] = {
1532 .name
= "Powercolor MTV878/ MTV878R/ MTV878F",
1537 .gpiomask
= 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1538 .muxsel
= { 2, 1, 1, },
1539 .audiomux
= { 0, 1, 2, 2, 4 },
1541 .tuner_type
= TUNER_PHILIPS_PAL
,
1542 .tuner_addr
= ADDR_UNSET
,
1547 /* ---- card 0x4c ---------------------------------- */
1548 [BTTV_BOARD_WINDVR
] = {
1549 /* Masaki Suzuki <masaki@btree.org> */
1550 .name
= "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1555 .gpiomask
= 0x140007,
1556 .muxsel
= { 2, 3, 1, 1 },
1557 .audiomux
= { 0, 1, 2, 3, 4, 0 },
1558 .tuner_type
= TUNER_PHILIPS_NTSC
,
1559 .tuner_addr
= ADDR_UNSET
,
1560 .audio_hook
= windvr_audio
,
1562 [BTTV_BOARD_GRANDTEC_MULTI
] = {
1563 .name
= "GrandTec Multi Capture Card (Bt878)",
1569 .muxsel
= { 2, 3, 1, 0 },
1575 .tuner_addr
= ADDR_UNSET
,
1577 [BTTV_BOARD_KWORLD
] = {
1578 .name
= "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1584 .muxsel
= { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1585 .audiomux
= { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
1586 * This card lacks external Audio In, so we mute it on Ext. & Int.
1587 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1588 * This card lacks PCI subsystem ID, sigh.
1589 * audiomux=1: lower volume, 2+3: mute
1590 * btwincap uses 0x80000/0x80003
1596 .tuner_addr
= ADDR_UNSET
,
1597 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1598 radio signal strength indicators work fine. */
1601 GPIO0,1: HEF4052 A0,A1
1602 GPIO2: HEF4052 nENABLE
1604 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1608 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1610 [BTTV_BOARD_DSP_TCVIDEO
] = {
1611 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1612 .name
= "DSP Design TCVIDEO",
1615 .muxsel
= { 2, 3, 1, 0},
1618 .tuner_addr
= ADDR_UNSET
,
1621 /* ---- card 0x50 ---------------------------------- */
1622 [BTTV_BOARD_HAUPPAUGEPVR
] = {
1623 .name
= "Hauppauge WinTV PVR",
1628 .muxsel
= { 2, 0, 1, 1},
1632 .tuner_addr
= ADDR_UNSET
,
1637 [BTTV_BOARD_GVBCTV5PCI
] = {
1638 .name
= "IODATA GV-BCTV5/PCI",
1643 .gpiomask
= 0x0f0f80,
1644 .muxsel
= {2, 3, 1, 0},
1645 .audiomux
= {0x030000, 0x010000, 0, 0, 0x020000, 0},
1648 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
1649 .tuner_addr
= ADDR_UNSET
,
1650 .audio_hook
= gvbctv5pci_audio
,
1653 [BTTV_BOARD_OSPREY1x0
] = {
1654 .name
= "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1655 .video_inputs
= 4, /* id-inputs-clock */
1659 .muxsel
= { 3, 2, 0, 1 },
1662 .tuner_addr
= ADDR_UNSET
,
1667 [BTTV_BOARD_OSPREY1x0_848
] = {
1668 .name
= "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1673 .muxsel
= { 2, 3, 1 },
1676 .tuner_addr
= ADDR_UNSET
,
1682 /* ---- card 0x54 ---------------------------------- */
1683 [BTTV_BOARD_OSPREY101_848
] = {
1684 .name
= "Osprey 101 (848)", /* 0x05-40C0-C1 */
1692 .tuner_addr
= ADDR_UNSET
,
1697 [BTTV_BOARD_OSPREY1x1
] = {
1698 .name
= "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1706 .tuner_addr
= ADDR_UNSET
,
1711 [BTTV_BOARD_OSPREY1x1_SVID
] = {
1712 .name
= "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1720 .tuner_addr
= ADDR_UNSET
,
1725 [BTTV_BOARD_OSPREY2xx
] = {
1726 .name
= "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1733 .tuner_type
= UNSET
,
1734 .tuner_addr
= ADDR_UNSET
,
1740 /* ---- card 0x58 ---------------------------------- */
1741 [BTTV_BOARD_OSPREY2x0_SVID
] = {
1742 .name
= "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1749 .tuner_type
= UNSET
,
1750 .tuner_addr
= ADDR_UNSET
,
1755 [BTTV_BOARD_OSPREY2x0
] = {
1756 .name
= "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1763 .tuner_type
= UNSET
,
1764 .tuner_addr
= ADDR_UNSET
,
1769 [BTTV_BOARD_OSPREY500
] = {
1770 .name
= "Osprey 500", /* 500 */
1778 .tuner_addr
= ADDR_UNSET
,
1783 [BTTV_BOARD_OSPREY540
] = {
1784 .name
= "Osprey 540", /* 540 */
1788 #if 0 /* TODO ... */
1789 .svhs
= OSPREY540_SVID_ANALOG
,
1790 .muxsel
= { [OSPREY540_COMP_ANALOG
] = 2,
1791 [OSPREY540_SVID_ANALOG
] = 3, },
1795 .tuner_addr
= ADDR_UNSET
,
1799 #if 0 /* TODO ... */
1800 .muxsel_hook
= osprey_540_muxsel
,
1801 .picture_hook
= osprey_540_set_picture
,
1805 /* ---- card 0x5C ---------------------------------- */
1806 [BTTV_BOARD_OSPREY2000
] = {
1807 .name
= "Osprey 2000", /* 2000 */
1814 .tuner_type
= UNSET
,
1815 .tuner_addr
= ADDR_UNSET
,
1818 .no_tda7432
= 1, /* must avoid, conflicts with the bt860 */
1820 [BTTV_BOARD_IDS_EAGLE
] = {
1821 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1822 .name
= "IDS Eagle",
1827 .tuner_addr
= ADDR_UNSET
,
1830 .muxsel
= { 0, 1, 2, 3 },
1831 .muxsel_hook
= eagle_muxsel
,
1836 [BTTV_BOARD_PINNACLESAT
] = {
1837 .name
= "Pinnacle PCTV Sat",
1843 .tuner_addr
= ADDR_UNSET
,
1847 .muxsel
= { 3, 0, 1, 2},
1852 [BTTV_BOARD_FORMAC_PROTV
] = {
1853 .name
= "Formac ProTV II (bt878)",
1859 /* TV, Comp1, Composite over SVID con, SVID */
1860 .muxsel
= { 2, 3, 1, 1},
1861 .audiomux
= { 2, 2, 0, 0, 0 },
1864 .tuner_type
= TUNER_PHILIPS_PAL
,
1865 .tuner_addr
= ADDR_UNSET
,
1867 GPIO=0x00,0x01,0x03: mute (?)
1868 0x02: both TV and radio (tuner: FM1216/I)
1869 The card has onboard audio connectors labeled "cdrom" and "board",
1870 not soldered here, though unknown wiring.
1871 Card lacks: external audio in, pci subsystem id.
1875 /* ---- card 0x60 ---------------------------------- */
1876 [BTTV_BOARD_MACHTV
] = {
1883 .muxsel
= { 2, 3, 1, 1},
1884 .audiomux
= { 0, 1, 2, 3, 4},
1887 .tuner_addr
= ADDR_UNSET
,
1890 [BTTV_BOARD_EURESYS_PICOLO
] = {
1891 .name
= "Euresys Picolo",
1900 .muxsel
= { 2, 0, 1},
1902 .tuner_type
= UNSET
,
1903 .tuner_addr
= ADDR_UNSET
,
1905 [BTTV_BOARD_PV150
] = {
1906 /* Luc Van Hoeylandt <luc@e-magic.be> */
1907 .name
= "ProVideo PV150", /* 0x4f */
1918 .tuner_type
= UNSET
,
1919 .tuner_addr
= ADDR_UNSET
,
1921 [BTTV_BOARD_AD_TVK503
] = {
1922 /* Hiroshi Takekawa <sian@big.or.jp> */
1923 /* This card lacks subsystem ID */
1924 .name
= "AD-TVK503", /* 0x63 */
1929 .gpiomask
= 0x001e8007,
1930 .muxsel
= { 2, 3, 1, 0 },
1931 /* Tuner, Radio, external, internal, off, on */
1932 .audiomux
= { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
1937 .tuner_addr
= ADDR_UNSET
,
1938 .audio_hook
= adtvk503_audio
,
1941 /* ---- card 0x64 ---------------------------------- */
1942 [BTTV_BOARD_HERCULES_SM_TV
] = {
1943 .name
= "Hercules Smart TV Stereo",
1949 .muxsel
= { 2, 3, 1, 1 },
1954 .tuner_addr
= ADDR_UNSET
,
1956 - card lacks subsystem ID
1957 - stereo variant w/ daughter board with tda9874a @0xb0
1959 always from tda9874 independent of GPIO (?)
1960 external line in: unknown
1961 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1962 hef4053 (instead 4052) for unknown function
1965 [BTTV_BOARD_PACETV
] = {
1966 .name
= "Pace TV & Radio Card",
1971 .muxsel
= { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
1976 .tuner_addr
= ADDR_UNSET
,
1979 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1980 only internal line out: (4pin header) RGGL
1981 Radio must be decoded by msp3410d (not routed through)*/
1983 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1986 [BTTV_BOARD_IVC200
] = {
1987 /* Chris Willing <chris@vislab.usyd.edu.au> */
1993 .tuner_addr
= ADDR_UNSET
,
1999 [BTTV_BOARD_XGUARD
] = {
2000 .name
= "Grand X-Guard / Trust 814PCI",
2006 .tuner_addr
= ADDR_UNSET
,
2008 .muxsel
= { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2009 .muxsel_hook
= xguard_muxsel
,
2016 /* ---- card 0x68 ---------------------------------- */
2017 [BTTV_BOARD_NEBULA_DIGITV
] = {
2018 .name
= "Nebula Electronics DigiTV",
2022 .muxsel
= { 2, 3, 1, 0},
2028 .tuner_addr
= ADDR_UNSET
,
2032 [BTTV_BOARD_PV143
] = {
2033 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2034 .name
= "ProVideo PV143",
2040 .muxsel
= { 2, 3, 1, 0 },
2046 .tuner_addr
= ADDR_UNSET
,
2048 [BTTV_BOARD_VD009X1_MINIDIN
] = {
2049 /* M.Klahr@phytec.de */
2050 .name
= "PHYTEC VD-009-X1 MiniDIN (bt878)",
2053 .tuner
= -1, /* card has no tuner */
2056 .muxsel
= { 2, 3, 1, 0},
2057 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2061 .tuner_addr
= ADDR_UNSET
,
2063 [BTTV_BOARD_VD009X1_COMBI
] = {
2064 .name
= "PHYTEC VD-009-X1 Combi (bt878)",
2067 .tuner
= -1, /* card has no tuner */
2070 .muxsel
= { 2, 3, 1, 1},
2071 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2075 .tuner_addr
= ADDR_UNSET
,
2078 /* ---- card 0x6c ---------------------------------- */
2079 [BTTV_BOARD_VD009_MINIDIN
] = {
2080 .name
= "PHYTEC VD-009 MiniDIN (bt878)",
2083 .tuner
= -1, /* card has no tuner */
2086 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
2087 via the upper nibble of muxsel. here: used for
2088 xternal video-mux */
2089 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2090 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2094 .tuner_addr
= ADDR_UNSET
,
2096 [BTTV_BOARD_VD009_COMBI
] = {
2097 .name
= "PHYTEC VD-009 Combi (bt878)",
2100 .tuner
= -1, /* card has no tuner */
2103 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
2104 via the upper nibble of muxsel. here: used for
2105 xternal video-mux */
2106 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2107 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2111 .tuner_addr
= ADDR_UNSET
,
2113 [BTTV_BOARD_IVC100
] = {
2119 .tuner_addr
= ADDR_UNSET
,
2122 .muxsel
= { 2, 3, 1, 0 },
2125 [BTTV_BOARD_IVC120
] = {
2126 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2129 .audio_inputs
= 0, /* card has no audio */
2130 .tuner
= -1, /* card has no tuner */
2132 .tuner_addr
= ADDR_UNSET
,
2133 .svhs
= -1, /* card has no svhs */
2139 .muxsel
= { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2140 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2141 .muxsel_hook
= ivc120_muxsel
,
2145 /* ---- card 0x70 ---------------------------------- */
2146 [BTTV_BOARD_PC_HDTV
] = {
2147 .name
= "pcHDTV HD-2000 TV",
2152 .muxsel
= { 2, 3, 1, 0},
2153 .tuner_type
= TUNER_PHILIPS_ATSC
,
2154 .tuner_addr
= ADDR_UNSET
,
2157 [BTTV_BOARD_TWINHAN_DST
] = {
2158 .name
= "Twinhan DST + clones",
2162 .tuner_type
= TUNER_ABSENT
,
2163 .tuner_addr
= ADDR_UNSET
,
2167 [BTTV_BOARD_WINFASTVC100
] = {
2168 .name
= "Winfast VC100",
2173 .muxsel
= { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
2177 .tuner_type
= TUNER_ABSENT
,
2178 .tuner_addr
= ADDR_UNSET
,
2181 [BTTV_BOARD_TEV560
] = {
2182 .name
= "Teppro TEV-560/InterVision IV-560",
2188 .muxsel
= { 2, 3, 1, 1},
2189 .audiomux
= { 1, 1, 1, 1, 0},
2191 .tuner_type
= TUNER_PHILIPS_PAL
,
2192 .tuner_addr
= ADDR_UNSET
,
2196 /* ---- card 0x74 ---------------------------------- */
2197 [BTTV_BOARD_SIMUS_GVC1100
] = {
2198 .name
= "SIMUS GVC1100",
2204 .tuner_addr
= ADDR_UNSET
,
2206 .muxsel
= { 2, 2, 2, 2},
2208 .muxsel_hook
= gvc1100_muxsel
,
2210 [BTTV_BOARD_NGSTV_PLUS
] = {
2211 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2212 .name
= "NGS NGSTV+",
2216 .gpiomask
= 0x008007,
2217 .muxsel
= {2, 3, 0, 0},
2218 .audiomux
= {0, 0, 0, 0, 0x000003, 0},
2220 .tuner_type
= TUNER_PHILIPS_PAL
,
2221 .tuner_addr
= ADDR_UNSET
,
2224 [BTTV_BOARD_LMLBT4
] = {
2225 /* http://linuxmedialabs.com */
2227 .video_inputs
= 4, /* IN1,IN2,IN3,IN4 */
2231 .muxsel
= { 2, 3, 1, 0 },
2237 .tuner_addr
= ADDR_UNSET
,
2239 [BTTV_BOARD_TEKRAM_M205
] = {
2240 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2241 .name
= "Tekram M205 PRO",
2245 .tuner_type
= TUNER_PHILIPS_PAL
,
2246 .tuner_addr
= ADDR_UNSET
,
2250 .muxsel
= { 2, 3, 1},
2251 .audiomux
= { 0x68, 0x68, 0x61, 0x61, 0x00 },
2255 /* ---- card 0x78 ---------------------------------- */
2256 [BTTV_BOARD_CONTVFMI
] = {
2257 /* Javier Cendan Ares <jcendan@lycos.es> */
2258 /* bt878 TV + FM without subsystem ID */
2259 .name
= "Conceptronic CONTVFMi",
2264 .gpiomask
= 0x008007,
2265 .muxsel
= { 2, 3, 1, 1 },
2266 .audiomux
= { 0, 1, 2, 2, 3 },
2269 .tuner_type
= TUNER_PHILIPS_PAL
,
2270 .tuner_addr
= ADDR_UNSET
,
2274 [BTTV_BOARD_PICOLO_TETRA_CHIP
] = {
2275 /*Eric DEBIEF <debief@telemsa.com>*/
2276 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2277 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2279 .name
= "Euresys Picolo Tetra",
2285 .gpiomask2
= 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2289 .muxsel
= {2,2,2,2},/*878A input is always MUX0, see above.*/
2290 .audiomux
= { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2293 .muxsel_hook
= picolo_tetra_muxsel
,/*Required as it doesn't follow the classic input selection policy*/
2295 .tuner_addr
= ADDR_UNSET
,
2297 [BTTV_BOARD_SPIRIT_TV
] = {
2298 /* Spirit TV Tuner from http://spiritmodems.com.au */
2299 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2300 .name
= "Spirit TV Tuner",
2305 .gpiomask
= 0x0000000f,
2306 .muxsel
= { 2, 1, 1 },
2307 .audiomux
= { 0x02, 0x00, 0x00, 0x00, 0x00},
2308 .tuner_type
= TUNER_TEMIC_PAL
,
2309 .tuner_addr
= ADDR_UNSET
,
2313 [BTTV_BOARD_AVDVBT_771
] = {
2314 /* Wolfram Joost <wojo@frokaschwei.de> */
2315 .name
= "AVerMedia AVerTV DVB-T 771",
2319 .tuner_type
= TUNER_ABSENT
,
2320 .tuner_addr
= ADDR_UNSET
,
2321 .muxsel
= { 3 , 3 },
2330 /* ---- card 0x7c ---------------------------------- */
2331 [BTTV_BOARD_AVDVBT_761
] = {
2332 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2333 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2334 .name
= "AverMedia AverTV DVB-T 761",
2338 .muxsel
= { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2344 .tuner_addr
= ADDR_UNSET
,
2349 [BTTV_BOARD_MATRIX_VISIONSQ
] = {
2350 /* andre.schwarz@matrix-vision.de */
2351 .name
= "MATRIX Vision Sigma-SQ",
2357 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2,
2358 3, 3, 3, 3, 3, 3, 3, 3 },
2359 .muxsel_hook
= sigmaSQ_muxsel
,
2364 .tuner_addr
= ADDR_UNSET
,
2366 [BTTV_BOARD_MATRIX_VISIONSLC
] = {
2367 /* andre.schwarz@matrix-vision.de */
2368 .name
= "MATRIX Vision Sigma-SLC",
2374 .muxsel
= { 2, 2, 2, 2 },
2375 .muxsel_hook
= sigmaSLC_muxsel
,
2380 .tuner_addr
= ADDR_UNSET
,
2382 /* BTTV_BOARD_APAC_VIEWCOMP */
2383 [BTTV_BOARD_APAC_VIEWCOMP
] = {
2384 /* Attila Kondoros <attila.kondoros@chello.hu> */
2385 /* bt878 TV + FM 0x00000000 subsystem ID */
2386 .name
= "APAC Viewcomp 878(AMAX)",
2392 .muxsel
= { 2, 3, 1, 1},
2393 .audiomux
= { 2, 0, 0, 0, 10},
2396 .tuner_type
= TUNER_PHILIPS_PAL
,
2397 .tuner_addr
= ADDR_UNSET
,
2398 .has_remote
= 1, /* miniremote works, see ir-kbd-gpio.c */
2399 .has_radio
= 1, /* not every card has radio */
2402 /* ---- card 0x80 ---------------------------------- */
2403 [BTTV_BOARD_DVICO_DVBT_LITE
] = {
2404 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2405 .name
= "DViCO FusionHDTV DVB-T Lite",
2414 .tuner_addr
= ADDR_UNSET
,
2416 [BTTV_BOARD_VGEAR_MYVCD
] = {
2417 /* Steven <photon38@pchome.com.tw> */
2418 .name
= "V-Gear MyVCD",
2424 .muxsel
= {2, 3, 1, 0},
2425 .audiomux
= {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2428 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
2429 .tuner_addr
= ADDR_UNSET
,
2435 [BTTV_BOARD_SUPER_TV
] = {
2436 /* Rick C <cryptdragoon@gmail.com> */
2437 .name
= "Super TV Tuner",
2442 .muxsel
= { 2, 3, 1, 0},
2443 .tuner_type
= TUNER_PHILIPS_NTSC
,
2444 .tuner_addr
= ADDR_UNSET
,
2445 .gpiomask
= 0x008007,
2446 .audiomux
= { 0, 0x000001,0,0, 0},
2450 [BTTV_BOARD_TIBET_CS16
] = {
2451 /* Chris Fanning <video4linux@haydon.net> */
2452 .name
= "Tibet Systems 'Progress DVR' CS16",
2457 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2463 .tuner_addr
= ADDR_UNSET
,
2464 .muxsel_hook
= tibetCS16_muxsel
,
2466 [BTTV_BOARD_KODICOM_4400R
] = {
2467 /* Bill Brack <wbrack@mmm.com.hk> */
2469 * Note that, because of the card's wiring, the "master"
2470 * BT878A chip (i.e. the one which controls the analog switch
2471 * and must use this card type) is the 2nd one detected. The
2472 * other 3 chips should use card type 0x85, whose description
2473 * follows this one. There is a EEPROM on the card (which is
2474 * connected to the I2C of one of those other chips), but is
2475 * not currently handled. There is also a facility for a
2476 * "monitor", which is also not currently implemented.
2478 .name
= "Kodicom 4400R (master)",
2483 .tuner_addr
= ADDR_UNSET
,
2485 /* GPIO bits 0-9 used for analog switch:
2486 * 00 - 03: camera selector
2487 * 04 - 06: channel (controller) selector
2488 * 07: data (1->on, 0->off)
2491 * bit 16 is input from sync separator for the channel
2493 .gpiomask
= 0x0003ff,
2495 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2500 .muxsel_hook
= kodicom4400r_muxsel
,
2502 [BTTV_BOARD_KODICOM_4400R_SL
] = {
2503 /* Bill Brack <wbrack@mmm.com.hk> */
2504 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2505 * one which controls the analog switch, and must use the card type)
2506 * is the 2nd one detected. The other 3 chips should use this card
2509 .name
= "Kodicom 4400R (slave)",
2514 .tuner_addr
= ADDR_UNSET
,
2516 .gpiomask
= 0x010000,
2518 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2523 .muxsel_hook
= kodicom4400r_muxsel
,
2525 /* ---- card 0x86---------------------------------- */
2526 [BTTV_BOARD_ADLINK_RTV24
] = {
2527 /* Michael Henson <mhenson@clarityvi.com> */
2528 /* Adlink RTV24 with special unlock codes */
2529 .name
= "Adlink RTV24",
2534 .muxsel
= { 2, 3, 1, 0},
2536 .tuner_addr
= ADDR_UNSET
,
2539 /* ---- card 0x87---------------------------------- */
2540 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
] = {
2541 /* Michael Krufky <mkrufky@m1k.net> */
2542 .name
= "DViCO FusionHDTV 5 Lite",
2544 .tuner_type
= TUNER_LG_TDVS_H062F
,
2545 .tuner_addr
= ADDR_UNSET
,
2550 .gpiomask
= 0x00e00007,
2551 .audiomux
= { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
2557 /* ---- card 0x88---------------------------------- */
2558 [BTTV_BOARD_ACORP_Y878F
] = {
2559 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2560 .name
= "Acorp Y878F",
2565 .gpiomask
= 0x01fe00,
2566 .muxsel
= { 2, 3, 1, 1},
2567 .audiomux
= { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
2570 .tuner_type
= TUNER_YMEC_TVF66T5_B_DFF
,
2571 .tuner_addr
= 0xc1 >>1,
2574 /* ---- card 0x89 ---------------------------------- */
2575 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2
] = {
2576 .name
= "Conceptronic CTVFMi v2",
2581 .gpiomask
= 0x001c0007,
2582 .muxsel
= { 2, 3, 1, 1 },
2583 .audiomux
= { 0, 1, 2, 2, 3 },
2586 .tuner_type
= TUNER_PHILIPS_FM1216ME_MK3
,
2587 .tuner_addr
= ADDR_UNSET
,
2593 [BTTV_BOARD_PV_BT878P_2E
] = {
2594 .name
= "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2599 .gpiomask
= 0x01fe00,
2600 .muxsel
= { 2,3,1,1,-1 },
2601 .digital_mode
= DIGITAL_MODE_CAMERA
,
2602 .audiomux
= { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 },
2605 .tuner_type
= TUNER_LG_PAL_FM
,
2609 static const unsigned int bttv_num_tvcards
= ARRAY_SIZE(bttv_tvcards
);
2611 /* ----------------------------------------------------------------------- */
2613 static unsigned char eeprom_data
[256];
2618 void __devinit
bttv_idcard(struct bttv
*btv
)
2620 unsigned int gpiobits
;
2624 /* read PCI subsystem ID */
2625 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_ID
, &tmp
);
2626 btv
->cardid
= tmp
<< 16;
2627 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_VENDOR_ID
, &tmp
);
2630 if (0 != btv
->cardid
&& 0xffffffff != btv
->cardid
) {
2631 /* look for the card */
2632 for (type
= -1, i
= 0; cards
[i
].id
!= 0; i
++)
2633 if (cards
[i
].id
== btv
->cardid
)
2638 printk(KERN_INFO
"bttv%d: detected: %s [card=%d], "
2639 "PCI subsystem ID is %04x:%04x\n",
2640 btv
->c
.nr
,cards
[type
].name
,cards
[type
].cardnr
,
2641 btv
->cardid
& 0xffff,
2642 (btv
->cardid
>> 16) & 0xffff);
2643 btv
->c
.type
= cards
[type
].cardnr
;
2646 printk(KERN_INFO
"bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2647 btv
->c
.nr
, btv
->cardid
& 0xffff,
2648 (btv
->cardid
>> 16) & 0xffff);
2649 printk(KERN_DEBUG
"please mail id, board name and "
2650 "the correct card= insmod option to kraxel@bytesex.org\n");
2654 /* let the user override the autodetected type */
2655 if (card
[btv
->c
.nr
] < bttv_num_tvcards
)
2656 btv
->c
.type
=card
[btv
->c
.nr
];
2658 /* print which card config we are using */
2659 printk(KERN_INFO
"bttv%d: using: %s [card=%d,%s]\n",btv
->c
.nr
,
2660 bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
,
2661 card
[btv
->c
.nr
] < bttv_num_tvcards
2662 ? "insmod option" : "autodetected");
2664 /* overwrite gpio stuff ?? */
2665 if (UNSET
== audioall
&& UNSET
== audiomux
[0])
2668 if (UNSET
!= audiomux
[0]) {
2670 for (i
= 0; i
< 5; i
++) {
2671 bttv_tvcards
[btv
->c
.type
].audiomux
[i
] = audiomux
[i
];
2672 gpiobits
|= audiomux
[i
];
2675 gpiobits
= audioall
;
2676 for (i
= 0; i
< 5; i
++) {
2677 bttv_tvcards
[btv
->c
.type
].audiomux
[i
] = audioall
;
2680 bttv_tvcards
[btv
->c
.type
].gpiomask
= (UNSET
!= gpiomask
) ? gpiomask
: gpiobits
;
2681 printk(KERN_INFO
"bttv%d: gpio config override: mask=0x%x, mux=",
2682 btv
->c
.nr
,bttv_tvcards
[btv
->c
.type
].gpiomask
);
2683 for (i
= 0; i
< 5; i
++) {
2684 printk("%s0x%x", i
? "," : "", bttv_tvcards
[btv
->c
.type
].audiomux
[i
]);
2690 * (most) board specific initialisations goes here
2693 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2694 void identify_by_eeprom(struct bttv
*btv
, unsigned char eeprom_data
[256])
2698 if (0 == strncmp(eeprom_data
,"GET MM20xPCTV",13))
2699 type
= BTTV_BOARD_MODTEC_205
;
2700 else if (0 == strncmp(eeprom_data
+20,"Picolo",7))
2701 type
= BTTV_BOARD_EURESYS_PICOLO
;
2702 else if (eeprom_data
[0] == 0x84 && eeprom_data
[2]== 0)
2703 type
= BTTV_BOARD_HAUPPAUGE
; /* old bt848 */
2707 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2708 btv
->c
.nr
, bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
);
2712 static void flyvideo_gpio(struct bttv
*btv
)
2714 int gpio
,has_remote
,has_radio
,is_capture_only
,is_lr90
,has_tda9820_tda9821
;
2717 gpio_inout(0xffffff, 0);
2718 udelay(8); /* without this we would see the 0x1800 mask */
2720 /* FIXME: must restore OUR_EN ??? */
2722 /* all cards provide GPIO info, some have an additional eeprom
2723 * LR50: GPIO coding can be found lower right CP1 .. CP9
2724 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2726 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2728 * lowest 3 bytes are remote control codes (no handshake needed)
2729 * xxxFFF: No remote control chip soldered
2730 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2731 * Note: Some bits are Audio_Mask !
2733 ttype
=(gpio
&0x0f0000)>>16;
2735 case 0x0: tuner
=2; /* NTSC, e.g. TPI8NSR11P */
2737 case 0x2: tuner
=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
2739 case 0x4: tuner
=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2741 case 0x6: tuner
=37;/* LG PAL (newer TAPC series) TAPC-G702P */
2743 case 0xC: tuner
=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2746 printk(KERN_INFO
"bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv
->c
.nr
);
2749 has_remote
= gpio
& 0x800000;
2750 has_radio
= gpio
& 0x400000;
2751 /* unknown 0x200000;
2752 * unknown2 0x100000; */
2753 is_capture_only
= !(gpio
& 0x008000); /* GPIO15 */
2754 has_tda9820_tda9821
= !(gpio
& 0x004000);
2755 is_lr90
= !(gpio
& 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2757 * gpio & 0x001000 output bit for audio routing */
2760 tuner
=4; /* No tuner present */
2762 printk(KERN_INFO
"bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2763 btv
->c
.nr
, has_radio
? "yes":"no ", has_remote
? "yes":"no ", tuner
, gpio
);
2764 printk(KERN_INFO
"bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2765 btv
->c
.nr
, is_lr90
?"yes":"no ", has_tda9820_tda9821
?"yes":"no ",
2766 is_capture_only
?"yes":"no ");
2768 if(tuner
!= -1) /* only set if known tuner autodetected, else let insmod option through */
2769 btv
->tuner_type
= tuner
;
2770 btv
->has_radio
= has_radio
;
2772 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2773 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2774 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
2775 if(has_tda9820_tda9821
) btv
->audio_hook
= lt9415_audio
;
2776 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
2779 static int miro_tunermap
[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2780 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2781 static int miro_fmtuner
[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2782 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2784 static void miro_pinnacle_gpio(struct bttv
*btv
)
2789 gpio_inout(0xffffff, 0);
2791 id
= ((gpio
>>10) & 63) -1;
2792 msp
= bttv_I2CRead(btv
, I2C_MSP3400
, "MSP34xx");
2794 btv
->tuner_type
= miro_tunermap
[id
];
2795 if (0 == (gpio
& 0x20)) {
2797 if (!miro_fmtuner
[id
]) {
2798 btv
->has_matchbox
= 1;
2799 btv
->mbox_we
= (1<<6);
2800 btv
->mbox_most
= (1<<7);
2801 btv
->mbox_clk
= (1<<8);
2802 btv
->mbox_data
= (1<<9);
2803 btv
->mbox_mask
= (1<<6)|(1<<7)|(1<<8)|(1<<9);
2809 if (btv
->c
.type
== BTTV_BOARD_MIRO
)
2810 btv
->c
.type
= BTTV_BOARD_MIROPRO
;
2811 if (btv
->c
.type
== BTTV_BOARD_PINNACLE
)
2812 btv
->c
.type
= BTTV_BOARD_PINNACLEPRO
;
2815 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2816 btv
->c
.nr
, id
+1, btv
->tuner_type
,
2817 !btv
->has_radio
? "no" :
2818 (btv
->has_matchbox
? "matchbox" : "fmtuner"),
2819 (-1 == msp
) ? "no" : "yes");
2821 /* new cards with microtune tuner */
2826 info
= "PAL / mono";
2829 info
= "PAL+SECAM / stereo";
2833 info
= "NTSC / stereo";
2837 info
= "PAL+SECAM / mono";
2840 info
= "NTSC / mono";
2843 info
= "NTSC / stereo";
2846 info
= "PAL / stereo";
2849 info
= "oops: unknown card";
2853 btv
->c
.type
= BTTV_BOARD_PINNACLEPRO
;
2855 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2856 btv
->c
.nr
, id
, info
, btv
->has_radio
? "yes" : "no");
2857 btv
->tuner_type
= 33;
2858 btv
->pinnacle_id
= id
;
2862 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
2863 #define LM1882_SYNC_DRIVE 0x200000L
2865 static void init_ids_eagle(struct bttv
*btv
)
2867 gpio_inout(0xffffff,0xFFFF37);
2868 gpio_write(0x200020);
2870 /* flash strobe inverter ?! */
2871 gpio_write(0x200024);
2873 /* switch sync drive off */
2874 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
2876 /* set BT848 muxel to 2 */
2877 btaor((2)<<5, ~(2<<5), BT848_IFORM
);
2880 /* Muxsel helper for the IDS Eagle.
2881 * the eagles does not use the standard muxsel-bits but
2882 * has its own multiplexer */
2883 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
)
2885 btaor((2)<<5, ~(3<<5), BT848_IFORM
);
2886 gpio_bits(3,bttv_tvcards
[btv
->c
.type
].muxsel
[input
&7]);
2889 /* set chroma ADC to sleep */
2890 btor(BT848_ADC_C_SLEEP
, BT848_ADC
);
2891 /* set to composite video */
2892 btand(~BT848_CONTROL_COMP
, BT848_E_CONTROL
);
2893 btand(~BT848_CONTROL_COMP
, BT848_O_CONTROL
);
2895 /* switch sync drive off */
2896 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
2899 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
)
2901 static const int masks
[] = {0x30, 0x01, 0x12, 0x23};
2902 gpio_write(masks
[input
%4]);
2905 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2908 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2909 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
2911 IN - sensor inputs, INx - sensor inputs and TI XORed together
2912 O1,O2,O3 - alarm outputs (relays)
2914 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
2918 static void init_lmlbt4x(struct bttv
*btv
)
2920 printk(KERN_DEBUG
"LMLBT4x init\n");
2921 btwrite(0x000000, BT848_GPIO_REG_INP
);
2922 gpio_inout(0xffffff, 0x0006C0);
2923 gpio_write(0x000000);
2926 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
)
2928 unsigned int inmux
= input
% 8;
2929 gpio_inout( 0xf, 0xf );
2930 gpio_bits( 0xf, inmux
);
2933 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
)
2935 unsigned int inmux
= input
% 4;
2936 gpio_inout( 3<<9, 3<<9 );
2937 gpio_bits( 3<<9, inmux
<<9 );
2940 /* ----------------------------------------------------------------------- */
2942 static void bttv_reset_audio(struct bttv
*btv
)
2945 * BT878A has a audio-reset register.
2946 * 1. This register is an audio reset function but it is in
2947 * function-0 (video capture) address space.
2948 * 2. It is enough to do this once per power-up of the card.
2949 * 3. There is a typo in the Conexant doc -- it is not at
2950 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2951 * --//Shrikumar 030609
2957 printk("bttv%d: BT878A ARESET\n",btv
->c
.nr
);
2958 btwrite((1<<7), 0x058);
2963 /* initialization part one -- before registering i2c bus */
2964 void __devinit
bttv_init_card1(struct bttv
*btv
)
2966 switch (btv
->c
.type
) {
2967 case BTTV_BOARD_HAUPPAUGE
:
2968 case BTTV_BOARD_HAUPPAUGE878
:
2969 boot_msp34xx(btv
,5);
2971 case BTTV_BOARD_VOODOOTV_FM
:
2972 boot_msp34xx(btv
,20);
2974 case BTTV_BOARD_AVERMEDIA98
:
2975 boot_msp34xx(btv
,11);
2977 case BTTV_BOARD_HAUPPAUGEPVR
:
2980 case BTTV_BOARD_TWINHAN_DST
:
2981 case BTTV_BOARD_AVDVBT_771
:
2982 case BTTV_BOARD_PINNACLESAT
:
2983 btv
->use_i2c_hw
= 1;
2985 case BTTV_BOARD_ADLINK_RTV24
:
2990 if (!bttv_tvcards
[btv
->c
.type
].has_dvb
)
2991 bttv_reset_audio(btv
);
2994 /* initialization part two -- after registering i2c bus */
2995 void __devinit
bttv_init_card2(struct bttv
*btv
)
2998 int addr
=ADDR_UNSET
;
3000 btv
->tuner_type
= -1;
3002 if (BTTV_BOARD_UNKNOWN
== btv
->c
.type
) {
3003 bttv_readee(btv
,eeprom_data
,0xa0);
3004 identify_by_eeprom(btv
,eeprom_data
);
3007 switch (btv
->c
.type
) {
3008 case BTTV_BOARD_MIRO
:
3009 case BTTV_BOARD_MIROPRO
:
3010 case BTTV_BOARD_PINNACLE
:
3011 case BTTV_BOARD_PINNACLEPRO
:
3013 miro_pinnacle_gpio(btv
);
3015 case BTTV_BOARD_FLYVIDEO_98
:
3016 case BTTV_BOARD_MAXI
:
3017 case BTTV_BOARD_LIFE_FLYKIT
:
3018 case BTTV_BOARD_FLYVIDEO
:
3019 case BTTV_BOARD_TYPHOON_TVIEW
:
3020 case BTTV_BOARD_CHRONOS_VS2
:
3021 case BTTV_BOARD_FLYVIDEO_98FM
:
3022 case BTTV_BOARD_FLYVIDEO2000
:
3023 case BTTV_BOARD_FLYVIDEO98EZ
:
3024 case BTTV_BOARD_CONFERENCETV
:
3025 case BTTV_BOARD_LIFETEC_9415
:
3028 case BTTV_BOARD_HAUPPAUGE
:
3029 case BTTV_BOARD_HAUPPAUGE878
:
3030 case BTTV_BOARD_HAUPPAUGEPVR
:
3031 /* pick up some config infos from the eeprom */
3032 bttv_readee(btv
,eeprom_data
,0xa0);
3033 hauppauge_eeprom(btv
);
3035 case BTTV_BOARD_AVERMEDIA98
:
3036 case BTTV_BOARD_AVPHONE98
:
3037 bttv_readee(btv
,eeprom_data
,0xa0);
3038 avermedia_eeprom(btv
);
3040 case BTTV_BOARD_PXC200
:
3043 case BTTV_BOARD_PICOLO_TETRA_CHIP
:
3044 picolo_tetra_init(btv
);
3046 case BTTV_BOARD_VHX
:
3048 btv
->has_matchbox
= 1;
3049 btv
->mbox_we
= 0x20;
3051 btv
->mbox_clk
= 0x08;
3052 btv
->mbox_data
= 0x10;
3053 btv
->mbox_mask
= 0x38;
3055 case BTTV_BOARD_VOBIS_BOOSTAR
:
3056 case BTTV_BOARD_TERRATV
:
3057 terratec_active_radio_upgrade(btv
);
3059 case BTTV_BOARD_MAGICTVIEW061
:
3060 if (btv
->cardid
== 0x3002144f) {
3062 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv
->c
.nr
);
3065 case BTTV_BOARD_STB2
:
3066 if (btv
->cardid
== 0x3060121a) {
3067 /* Fix up entry for 3DFX VoodooTV 100,
3068 which is an OEM STB card variant. */
3070 btv
->tuner_type
=TUNER_TEMIC_NTSC
;
3073 case BTTV_BOARD_OSPREY1x0
:
3074 case BTTV_BOARD_OSPREY1x0_848
:
3075 case BTTV_BOARD_OSPREY101_848
:
3076 case BTTV_BOARD_OSPREY1x1
:
3077 case BTTV_BOARD_OSPREY1x1_SVID
:
3078 case BTTV_BOARD_OSPREY2xx
:
3079 case BTTV_BOARD_OSPREY2x0_SVID
:
3080 case BTTV_BOARD_OSPREY2x0
:
3081 case BTTV_BOARD_OSPREY500
:
3082 case BTTV_BOARD_OSPREY540
:
3083 case BTTV_BOARD_OSPREY2000
:
3084 bttv_readee(btv
,eeprom_data
,0xa0);
3087 case BTTV_BOARD_IDS_EAGLE
:
3088 init_ids_eagle(btv
);
3090 case BTTV_BOARD_MODTEC_205
:
3091 bttv_readee(btv
,eeprom_data
,0xa0);
3094 case BTTV_BOARD_LMLBT4
:
3097 case BTTV_BOARD_TIBET_CS16
:
3098 tibetCS16_init(btv
);
3100 case BTTV_BOARD_KODICOM_4400R
:
3101 kodicom4400r_init(btv
);
3105 /* pll configuration */
3106 if (!(btv
->id
==848 && btv
->revision
==0x11)) {
3107 /* defaults from card list */
3108 if (PLL_28
== bttv_tvcards
[btv
->c
.type
].pll
) {
3109 btv
->pll
.pll_ifreq
=28636363;
3110 btv
->pll
.pll_crystal
=BT848_IFORM_XT0
;
3112 if (PLL_35
== bttv_tvcards
[btv
->c
.type
].pll
) {
3113 btv
->pll
.pll_ifreq
=35468950;
3114 btv
->pll
.pll_crystal
=BT848_IFORM_XT1
;
3116 /* insmod options can override */
3117 switch (pll
[btv
->c
.nr
]) {
3119 btv
->pll
.pll_crystal
= 0;
3120 btv
->pll
.pll_ifreq
= 0;
3121 btv
->pll
.pll_ofreq
= 0;
3123 case 1: /* 28 MHz */
3125 btv
->pll
.pll_ifreq
= 28636363;
3126 btv
->pll
.pll_ofreq
= 0;
3127 btv
->pll
.pll_crystal
= BT848_IFORM_XT0
;
3129 case 2: /* 35 MHz */
3131 btv
->pll
.pll_ifreq
= 35468950;
3132 btv
->pll
.pll_ofreq
= 0;
3133 btv
->pll
.pll_crystal
= BT848_IFORM_XT1
;
3137 btv
->pll
.pll_current
= -1;
3139 /* tuner configuration (from card list / autodetect / insmod option) */
3140 if (ADDR_UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_addr
)
3141 addr
= bttv_tvcards
[btv
->c
.type
].tuner_addr
;
3143 if (UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_type
)
3144 if(UNSET
== btv
->tuner_type
)
3145 btv
->tuner_type
= bttv_tvcards
[btv
->c
.type
].tuner_type
;
3146 if (UNSET
!= tuner
[btv
->c
.nr
])
3147 btv
->tuner_type
= tuner
[btv
->c
.nr
];
3148 printk("bttv%d: using tuner=%d\n",btv
->c
.nr
,btv
->tuner_type
);
3149 if (btv
->pinnacle_id
!= UNSET
)
3150 bttv_call_i2c_clients(btv
, AUDC_CONFIG_PINNACLE
,
3152 if (btv
->tuner_type
!= UNSET
) {
3153 struct tuner_setup tun_setup
;
3155 tun_setup
.mode_mask
= T_RADIO
| T_ANALOG_TV
| T_DIGITAL_TV
;
3156 tun_setup
.type
= btv
->tuner_type
;
3157 tun_setup
.addr
= addr
;
3159 bttv_call_i2c_clients(btv
, TUNER_SET_TYPE_ADDR
, &tun_setup
);
3162 btv
->svhs
= bttv_tvcards
[btv
->c
.type
].svhs
;
3163 if (svhs
[btv
->c
.nr
] != UNSET
)
3164 btv
->svhs
= svhs
[btv
->c
.nr
];
3165 if (remote
[btv
->c
.nr
] != UNSET
)
3166 btv
->has_remote
= remote
[btv
->c
.nr
];
3168 if (bttv_tvcards
[btv
->c
.type
].has_radio
)
3170 if (bttv_tvcards
[btv
->c
.type
].has_remote
)
3172 if (!bttv_tvcards
[btv
->c
.type
].no_gpioirq
)
3174 if (bttv_tvcards
[btv
->c
.type
].audio_hook
)
3175 btv
->audio_hook
=bttv_tvcards
[btv
->c
.type
].audio_hook
;
3177 if (bttv_tvcards
[btv
->c
.type
].digital_mode
== DIGITAL_MODE_CAMERA
) {
3178 /* detect Bt832 chip for quartzsight digital camera */
3179 if ((bttv_I2CRead(btv
, I2C_BT832_ALT1
, "Bt832") >=0) ||
3180 (bttv_I2CRead(btv
, I2C_BT832_ALT2
, "Bt832") >=0))
3187 /* try to detect audio/fader chips */
3188 if (!bttv_tvcards
[btv
->c
.type
].no_msp34xx
&&
3189 bttv_I2CRead(btv
, I2C_MSP3400
, "MSP34xx") >=0)
3190 request_module("msp3400");
3192 if (bttv_tvcards
[btv
->c
.type
].msp34xx_alt
&&
3193 bttv_I2CRead(btv
, I2C_MSP3400_ALT
, "MSP34xx (alternate address)") >=0)
3194 request_module("msp3400");
3196 if (!bttv_tvcards
[btv
->c
.type
].no_tda9875
&&
3197 bttv_I2CRead(btv
, I2C_TDA9875
, "TDA9875") >=0)
3198 request_module("tda9875");
3200 if (!bttv_tvcards
[btv
->c
.type
].no_tda7432
&&
3201 bttv_I2CRead(btv
, I2C_TDA7432
, "TDA7432") >=0)
3202 request_module("tda7432");
3204 if (bttv_tvcards
[btv
->c
.type
].needs_tvaudio
)
3205 request_module("tvaudio");
3209 if (btv
->pinnacle_id
!= UNSET
)
3211 if (0 == tda9887
&& 0 == bttv_tvcards
[btv
->c
.type
].has_dvb
&&
3212 bttv_I2CRead(btv
, I2C_TDA9887
, "TDA9887") >=0)
3214 if((btv
->tuner_type
== TUNER_PHILIPS_FM1216ME_MK3
) ||
3215 (btv
->tuner_type
== TUNER_PHILIPS_FM1236_MK3
) ||
3216 (btv
->tuner_type
== TUNER_PHILIPS_FM1256_IH3
) ||
3218 request_module("tda9887");
3219 if (btv
->tuner_type
!= UNSET
)
3220 request_module("tuner");
3224 /* ----------------------------------------------------------------------- */
3226 static void modtec_eeprom(struct bttv
*btv
)
3228 if( strncmp(&(eeprom_data
[0x1e]),"Temic 4066 FY5",14) ==0) {
3229 btv
->tuner_type
=TUNER_TEMIC_4066FY5_PAL_I
;
3230 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3231 btv
->c
.nr
,&eeprom_data
[0x1e]);
3232 } else if (strncmp(&(eeprom_data
[0x1e]),"Alps TSBB5",10) ==0) {
3233 btv
->tuner_type
=TUNER_ALPS_TSBB5_PAL_I
;
3234 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3235 btv
->c
.nr
,&eeprom_data
[0x1e]);
3236 } else if (strncmp(&(eeprom_data
[0x1e]),"Philips FM1246",14) ==0) {
3237 btv
->tuner_type
=TUNER_PHILIPS_NTSC
;
3238 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3239 btv
->c
.nr
,&eeprom_data
[0x1e]);
3241 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3242 btv
->c
.nr
,&eeprom_data
[0x1e]);
3246 static void __devinit
hauppauge_eeprom(struct bttv
*btv
)
3250 tveeprom_hauppauge_analog(&btv
->i2c_client
, &tv
, eeprom_data
);
3251 btv
->tuner_type
= tv
.tuner_type
;
3252 btv
->has_radio
= tv
.has_radio
;
3255 static int terratec_active_radio_upgrade(struct bttv
*btv
)
3260 btv
->has_matchbox
= 1;
3261 btv
->mbox_we
= 0x10;
3262 btv
->mbox_most
= 0x20;
3263 btv
->mbox_clk
= 0x08;
3264 btv
->mbox_data
= 0x04;
3265 btv
->mbox_mask
= 0x3c;
3267 btv
->mbox_iow
= 1 << 8;
3268 btv
->mbox_ior
= 1 << 9;
3269 btv
->mbox_csel
= 1 << 10;
3272 tea5757_write(btv
, 5 * freq
+ 0x358); /* write 0x1ed8 */
3273 if (0x1ed8 == tea5757_read(btv
)) {
3274 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3277 btv
->has_matchbox
= 1;
3280 btv
->has_matchbox
= 0;
3286 /* ----------------------------------------------------------------------- */
3289 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3291 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3292 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3293 * unpacked with unzip).
3295 #define PVR_GPIO_DELAY 10
3297 #define BTTV_ALT_DATA 0x000001
3298 #define BTTV_ALT_DCLK 0x100000
3299 #define BTTV_ALT_NCONFIG 0x800000
3301 static int __devinit
pvr_altera_load(struct bttv
*btv
, u8
*micro
, u32 microlen
)
3307 gpio_inout(0xffffff,BTTV_ALT_DATA
|BTTV_ALT_DCLK
|BTTV_ALT_NCONFIG
);
3309 udelay(PVR_GPIO_DELAY
);
3311 gpio_write(BTTV_ALT_NCONFIG
);
3312 udelay(PVR_GPIO_DELAY
);
3314 for (n
= 0; n
< microlen
; n
++) {
3316 for ( i
= 0 ; i
< 8 ; i
++ ) {
3317 gpio_bits(BTTV_ALT_DCLK
,0);
3319 gpio_bits(BTTV_ALT_DATA
,BTTV_ALT_DATA
);
3321 gpio_bits(BTTV_ALT_DATA
,0);
3322 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3326 gpio_bits(BTTV_ALT_DCLK
,0);
3327 udelay(PVR_GPIO_DELAY
);
3329 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3330 for (i
= 0 ; i
< 30 ; i
++) {
3331 gpio_bits(BTTV_ALT_DCLK
,0);
3332 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3334 gpio_bits(BTTV_ALT_DCLK
,0);
3338 static int __devinit
pvr_boot(struct bttv
*btv
)
3340 const struct firmware
*fw_entry
;
3343 rc
= request_firmware(&fw_entry
, "hcwamc.rbf", &btv
->c
.pci
->dev
);
3345 printk(KERN_WARNING
"bttv%d: no altera firmware [via hotplug]\n",
3349 rc
= pvr_altera_load(btv
, fw_entry
->data
, fw_entry
->size
);
3350 printk(KERN_INFO
"bttv%d: altera firmware upload %s\n",
3351 btv
->c
.nr
, (rc
< 0) ? "failed" : "ok");
3352 release_firmware(fw_entry
);
3356 /* ----------------------------------------------------------------------- */
3357 /* some osprey specific stuff */
3359 static void __devinit
osprey_eeprom(struct bttv
*btv
)
3362 unsigned char *ee
= eeprom_data
;
3363 unsigned long serial
= 0;
3365 if (btv
->c
.type
== 0) {
3366 /* this might be an antique... check for MMAC label in eeprom */
3367 if ((ee
[0]=='M') && (ee
[1]=='M') && (ee
[2]=='A') && (ee
[3]=='C')) {
3368 unsigned char checksum
= 0;
3369 for (i
=0; i
<21; i
++)
3371 if (checksum
!= ee
[21])
3373 btv
->c
.type
= BTTV_BOARD_OSPREY1x0_848
;
3374 for (i
= 12; i
< 21; i
++)
3375 serial
*= 10, serial
+= ee
[i
] - '0';
3378 unsigned short type
;
3381 for(; offset
< 8*16; offset
+= 16) {
3382 unsigned short checksum
= 0;
3383 /* verify the checksum */
3384 for(i
= 0; i
<14; i
++) checksum
+= ee
[i
+offset
];
3385 checksum
= ~checksum
; /* no idea why */
3386 if ((((checksum
>>8)&0x0FF) == ee
[offset
+14]) &&
3387 ((checksum
& 0x0FF) == ee
[offset
+15])) {
3395 /* found a valid descriptor */
3396 type
= (ee
[offset
+4]<<8) | (ee
[offset
+5]);
3402 btv
->c
.type
= BTTV_BOARD_OSPREY1x0_848
;
3405 btv
->c
.type
= BTTV_BOARD_OSPREY101_848
;
3411 btv
->c
.type
= BTTV_BOARD_OSPREY1x0
;
3415 btv
->c
.type
= BTTV_BOARD_OSPREY1x1
;
3420 btv
->c
.type
= BTTV_BOARD_OSPREY1x1_SVID
;
3426 btv
->c
.type
= BTTV_BOARD_OSPREY2xx
;
3430 btv
->c
.type
= BTTV_BOARD_OSPREY2x0_SVID
;
3433 btv
->c
.type
= BTTV_BOARD_OSPREY500
;
3437 btv
->c
.type
= BTTV_BOARD_OSPREY540
;
3438 /* bttv_osprey_540_init(btv); */
3442 btv
->c
.type
= BTTV_BOARD_OSPREY2x0
;
3443 /* enable output on select control lines */
3444 gpio_inout(0xffffff,0x000303);
3447 /* unknown...leave generic, but get serial # */
3450 serial
= (ee
[offset
+6] << 24)
3451 | (ee
[offset
+7] << 16)
3452 | (ee
[offset
+8] << 8)
3456 printk(KERN_INFO
"bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3457 btv
->c
.nr
, btv
->c
.type
, bttv_tvcards
[btv
->c
.type
].name
,serial
);
3460 /* ----------------------------------------------------------------------- */
3461 /* AVermedia specific stuff, from bktr_card.c */
3463 static int tuner_0_table
[] = {
3464 TUNER_PHILIPS_NTSC
, TUNER_PHILIPS_PAL
/* PAL-BG*/,
3465 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
/* PAL-I*/,
3466 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
,
3467 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_SECAM
,
3468 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_PAL
,
3469 TUNER_PHILIPS_FM1216ME_MK3
};
3471 static int tuner_1_table
[] = {
3472 TUNER_TEMIC_NTSC
, TUNER_TEMIC_PAL
,
3473 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3474 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3475 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_4012FY5
, /* TUNER_TEMIC_SECAM */
3476 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_PAL
};
3478 static void __devinit
avermedia_eeprom(struct bttv
*btv
)
3480 int tuner_make
,tuner_tv_fm
,tuner_format
,tuner
=0;
3482 tuner_make
= (eeprom_data
[0x41] & 0x7);
3483 tuner_tv_fm
= (eeprom_data
[0x41] & 0x18) >> 3;
3484 tuner_format
= (eeprom_data
[0x42] & 0xf0) >> 4;
3485 btv
->has_remote
= (eeprom_data
[0x42] & 0x01);
3487 if (tuner_make
== 0 || tuner_make
== 2)
3488 if(tuner_format
<=0x0a)
3489 tuner
= tuner_0_table
[tuner_format
];
3490 if (tuner_make
== 1)
3491 if(tuner_format
<=9)
3492 tuner
= tuner_1_table
[tuner_format
];
3494 if (tuner_make
== 4)
3495 if(tuner_format
== 0x09)
3496 tuner
= TUNER_LG_NTSC_NEW_TAPC
; /* TAPC-G702P */
3498 printk(KERN_INFO
"bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3499 btv
->c
.nr
,eeprom_data
[0x41],eeprom_data
[0x42]);
3501 btv
->tuner_type
=tuner
;
3504 printk("Unknown type");
3505 printk(" radio:%s remote control:%s\n",
3506 tuner_tv_fm
? "yes" : "no",
3507 btv
->has_remote
? "yes" : "no");
3510 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3511 void bttv_tda9880_setnorm(struct bttv
*btv
, int norm
)
3513 /* fix up our card entry */
3514 if(norm
==VIDEO_MODE_NTSC
) {
3515 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[0]=0x957fff;
3516 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[4]=0x957fff;
3517 dprintk("bttv_tda9880_setnorm to NTSC\n");
3520 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[0]=0x947fff;
3521 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].audiomux
[4]=0x947fff;
3522 dprintk("bttv_tda9880_setnorm to PAL\n");
3524 /* set GPIO according */
3525 gpio_bits(bttv_tvcards
[btv
->c
.type
].gpiomask
,
3526 bttv_tvcards
[btv
->c
.type
].audiomux
[btv
->audio
]);
3531 * reset/enable the MSP on some Hauppauge cards
3532 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3537 static void __devinit
boot_msp34xx(struct bttv
*btv
, int pin
)
3539 int mask
= (1 << pin
);
3541 gpio_inout(mask
,mask
);
3544 gpio_bits(mask
,mask
);
3547 bttv_gpio_tracking(btv
,"msp34xx");
3549 printk(KERN_INFO
"bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3550 "init [%d]\n", btv
->c
.nr
, pin
);
3553 static void __devinit
boot_bt832(struct bttv
*btv
)
3557 /* ----------------------------------------------------------------------- */
3558 /* Imagenation L-Model PXC200 Framegrabber */
3559 /* This is basically the same procedure as
3560 * used by Alessandro Rubini in his pxc200
3561 * driver, but using BTTV functions */
3563 static void __devinit
init_PXC200(struct bttv
*btv
)
3565 static int vals
[] __devinitdata
= { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3566 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3572 /* Initialise GPIO-connevted stuff */
3573 gpio_inout(0xffffff, (1<<13));
3577 /* GPIO inputs are pulled up, so no need to drive
3578 * reset pin any longer */
3579 gpio_bits(0xffffff, 0);
3581 bttv_gpio_tracking(btv
,"pxc200");
3583 /* we could/should try and reset/control the AD pots? but
3584 right now we simply turned off the crushing. Without
3585 this the AGC drifts drifts
3586 remember the EN is reverse logic -->
3587 setting BT848_ADC_AGC_EN disable the AGC
3588 tboult@eecs.lehigh.edu
3591 btwrite(BT848_ADC_RESERVED
|BT848_ADC_AGC_EN
, BT848_ADC
);
3593 /* Initialise MAX517 DAC */
3594 printk(KERN_INFO
"Setting DAC reference voltage level ...\n");
3595 bttv_I2CWrite(btv
,0x5E,0,0x80,1);
3597 /* Initialise 12C508 PIC */
3598 /* The I2CWrite and I2CRead commmands are actually to the
3599 * same chips - but the R/W bit is included in the address
3600 * argument so the numbers are different */
3603 printk(KERN_INFO
"Initialising 12C508 PIC chip ...\n");
3605 /* First of all, enable the clock line. This is used in the PXC200-F */
3606 val
= btread(BT848_GPIO_DMA_CTL
);
3607 val
|= BT848_GPIO_DMA_CTL_GPCLKMODE
;
3608 btwrite(val
, BT848_GPIO_DMA_CTL
);
3610 /* Then, push to 0 the reset pin long enough to reset the *
3611 * device same as above for the reset line, but not the same
3612 * value sent to the GPIO-connected stuff
3613 * which one is the good one? */
3614 gpio_inout(0xffffff,(1<<2));
3619 for (i
= 0; i
< ARRAY_SIZE(vals
); i
++) {
3620 tmp
=bttv_I2CWrite(btv
,0x1E,0,vals
[i
],1);
3623 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3624 vals
[i
],tmp
,bttv_I2CRead(btv
,0x1F,NULL
));
3628 printk(KERN_INFO
"PXC200 Initialised.\n");
3633 /* ----------------------------------------------------------------------- */
3635 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3636 * it. This apparently involves the following procedure for each 878 chip:
3638 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3640 * 2) write to GPIO_DATA
3646 * read from GPIO_DATA into buf (uint_32)
3647 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3648 * error. ERROR_CPLD_Check_Failed stop.
3650 * 3) write to GPIO_DATA
3651 * - write 0x4400 + 0x0E
3653 * - write 0x4410 + 0x0E
3656 * read from GPIO_DATA into buf (uint_32)
3657 * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3658 * error. ERROR_CPLD_Check_Failed.
3660 /* ----------------------------------------------------------------------- */
3662 init_RTV24 (struct bttv
*btv
)
3664 uint32_t dataRead
= 0;
3665 long watchdog_value
= 0x0E;
3668 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3671 btwrite (0x00c3feff, BT848_GPIO_OUT_EN
);
3673 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
3675 btwrite (0x10 + watchdog_value
, BT848_GPIO_DATA
);
3677 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
3679 dataRead
= btread (BT848_GPIO_DATA
);
3681 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 1)) {
3683 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3684 btv
->c
.nr
, dataRead
);
3687 btwrite (0x4400 + watchdog_value
, BT848_GPIO_DATA
);
3689 btwrite (0x4410 + watchdog_value
, BT848_GPIO_DATA
);
3691 btwrite (watchdog_value
, BT848_GPIO_DATA
);
3693 dataRead
= btread (BT848_GPIO_DATA
);
3695 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 0)) {
3697 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3698 btv
->c
.nr
, dataRead
);
3704 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv
->c
.nr
);
3709 /* ----------------------------------------------------------------------- */
3710 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3712 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3713 * This code is placed under the terms of the GNU General Public License
3715 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3718 static void bus_low(struct bttv
*btv
, int bit
)
3720 if (btv
->mbox_ior
) {
3721 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3722 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3729 if (btv
->mbox_ior
) {
3730 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3735 static void bus_high(struct bttv
*btv
, int bit
)
3737 if (btv
->mbox_ior
) {
3738 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3739 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3746 if (btv
->mbox_ior
) {
3747 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3752 static int bus_in(struct bttv
*btv
, int bit
)
3754 if (btv
->mbox_ior
) {
3755 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3756 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3759 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
3762 return gpio_read() & (bit
);
3765 /* TEA5757 register bits */
3766 #define TEA_FREQ 0:14
3767 #define TEA_BUFFER 15:15
3769 #define TEA_SIGNAL_STRENGTH 16:17
3771 #define TEA_PORT1 18:18
3772 #define TEA_PORT0 19:19
3774 #define TEA_BAND 20:21
3775 #define TEA_BAND_FM 0
3776 #define TEA_BAND_MW 1
3777 #define TEA_BAND_LW 2
3778 #define TEA_BAND_SW 3
3780 #define TEA_MONO 22:22
3781 #define TEA_ALLOW_STEREO 0
3782 #define TEA_FORCE_MONO 1
3784 #define TEA_SEARCH_DIRECTION 23:23
3785 #define TEA_SEARCH_DOWN 0
3786 #define TEA_SEARCH_UP 1
3788 #define TEA_STATUS 24:24
3789 #define TEA_STATUS_TUNED 0
3790 #define TEA_STATUS_SEARCHING 1
3792 /* Low-level stuff */
3793 static int tea5757_read(struct bttv
*btv
)
3795 unsigned long timeout
;
3799 /* better safe than sorry */
3800 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
);
3802 if (btv
->mbox_ior
) {
3803 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3804 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3809 bttv_gpio_tracking(btv
,"tea5757 read");
3811 bus_low(btv
,btv
->mbox_we
);
3812 bus_low(btv
,btv
->mbox_clk
);
3815 timeout
= jiffies
+ HZ
;
3817 /* wait for DATA line to go low; error if it doesn't */
3818 while (bus_in(btv
,btv
->mbox_data
) && time_before(jiffies
, timeout
))
3820 if (bus_in(btv
,btv
->mbox_data
)) {
3821 printk(KERN_WARNING
"bttv%d: tea5757: read timeout\n",btv
->c
.nr
);
3825 dprintk("bttv%d: tea5757:",btv
->c
.nr
);
3826 for(i
= 0; i
< 24; i
++)
3829 bus_high(btv
,btv
->mbox_clk
);
3831 dprintk("%c",(bus_in(btv
,btv
->mbox_most
) == 0)?'T':'-');
3832 bus_low(btv
,btv
->mbox_clk
);
3834 value
|= (bus_in(btv
,btv
->mbox_data
) == 0)?0:1; /* MSB first */
3835 dprintk("%c", (bus_in(btv
,btv
->mbox_most
) == 0)?'S':'M');
3837 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv
->c
.nr
, value
);
3841 static int tea5757_write(struct bttv
*btv
, int value
)
3846 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
| btv
->mbox_data
);
3848 if (btv
->mbox_ior
) {
3849 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
3850 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
3854 bttv_gpio_tracking(btv
,"tea5757 write");
3856 dprintk("bttv%d: tea5757: write 0x%X\n", btv
->c
.nr
, value
);
3857 bus_low(btv
,btv
->mbox_clk
);
3858 bus_high(btv
,btv
->mbox_we
);
3859 for(i
= 0; i
< 25; i
++)
3861 if (reg
& 0x1000000)
3862 bus_high(btv
,btv
->mbox_data
);
3864 bus_low(btv
,btv
->mbox_data
);
3866 bus_high(btv
,btv
->mbox_clk
);
3868 bus_low(btv
,btv
->mbox_clk
);
3871 bus_low(btv
,btv
->mbox_we
); /* unmute !!! */
3875 void tea5757_set_freq(struct bttv
*btv
, unsigned short freq
)
3877 dprintk("tea5757_set_freq %d\n",freq
);
3878 tea5757_write(btv
, 5 * freq
+ 0x358); /* add 10.7MHz (see docs) */
3882 /* ----------------------------------------------------------------------- */
3885 void winview_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3887 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
3888 int bits_out
, loops
, vol
, data
;
3891 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
3892 v
->flags
|= VIDEO_AUDIO_VOLUME
;
3896 /* 32 levels logarithmic */
3897 vol
= 32 - ((v
->volume
>>11));
3899 bits_out
= (PT2254_DBS_IN_2
>>(vol
%5));
3901 bits_out
|= (PT2254_DBS_IN_10
>>(vol
/5));
3902 bits_out
|= PT2254_L_CHANNEL
| PT2254_R_CHANNEL
;
3904 data
&= ~(WINVIEW_PT2254_CLK
| WINVIEW_PT2254_DATA
|
3905 WINVIEW_PT2254_STROBE
);
3906 for (loops
= 17; loops
>= 0 ; loops
--) {
3907 if (bits_out
& (1<<loops
))
3908 data
|= WINVIEW_PT2254_DATA
;
3910 data
&= ~WINVIEW_PT2254_DATA
;
3913 data
|= WINVIEW_PT2254_CLK
;
3916 data
&= ~WINVIEW_PT2254_CLK
;
3919 data
|= WINVIEW_PT2254_STROBE
;
3920 data
&= ~WINVIEW_PT2254_DATA
;
3923 data
&= ~WINVIEW_PT2254_STROBE
;
3927 /* ----------------------------------------------------------------------- */
3928 /* mono/stereo control for various cards (which don't use i2c chips but */
3929 /* connect something to the GPIO pins */
3932 gvbctv3pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3934 unsigned int con
= 0;
3937 gpio_inout(0x300, 0x300);
3938 if (v
->mode
& VIDEO_SOUND_LANG1
)
3940 if (v
->mode
& VIDEO_SOUND_LANG2
)
3942 if (v
->mode
& VIDEO_SOUND_STEREO
)
3944 /* if (v->mode & VIDEO_SOUND_MONO)
3946 gpio_bits(0x300, con
);
3948 v
->mode
= VIDEO_SOUND_STEREO
|
3949 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3954 gvbctv5pci_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
3956 unsigned int val
, con
;
3958 if (btv
->radio_user
)
3964 if (v
->mode
& VIDEO_SOUND_LANG2
) {
3965 if (v
->mode
& VIDEO_SOUND_LANG1
) {
3974 if (con
!= (val
& 0x300)) {
3975 gpio_bits(0x300, con
);
3977 bttv_gpio_tracking(btv
,"gvbctv5pci");
3980 switch (val
& 0x70) {
3982 v
->mode
= VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
3985 v
->mode
= VIDEO_SOUND_LANG2
;
3988 v
->mode
= VIDEO_SOUND_LANG1
;
3991 v
->mode
= VIDEO_SOUND_STEREO
;
3994 v
->mode
= VIDEO_SOUND_MONO
;
3997 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
3998 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4004 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4005 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4006 * 0xdde enables mono and 0xccd enables sap
4008 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4009 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4010 * input/output sound connection, so both must be set for output mode.
4012 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4013 * handles this with a tda9840
4017 avermedia_tvphone_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4022 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
4024 if (v
->mode
& VIDEO_SOUND_STEREO
)
4027 gpio_bits(0x03,val
);
4029 bttv_gpio_tracking(btv
,"avermedia");
4032 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4039 avermedia_tv_stereo_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4044 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
4046 if (v
->mode
& VIDEO_SOUND_STEREO
) /* STEREO */
4048 btaor(val
, ~0x03, BT848_GPIO_DATA
);
4050 bttv_gpio_tracking(btv
,"avermedia");
4052 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4053 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4058 /* Lifetec 9415 handling */
4060 lt9415_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4064 if (gpio_read() & 0x4000) {
4065 v
->mode
= VIDEO_SOUND_MONO
;
4070 if (v
->mode
& VIDEO_SOUND_LANG2
) /* A2 SAP */
4072 if (v
->mode
& VIDEO_SOUND_STEREO
) /* A2 stereo */
4074 if ((v
->mode
& VIDEO_SOUND_LANG1
) ||
4075 (v
->mode
& VIDEO_SOUND_MONO
))
4077 gpio_bits(0x0880, val
);
4079 bttv_gpio_tracking(btv
,"lt9415");
4081 /* autodetect doesn't work with this card :-( */
4082 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4083 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4088 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4090 terratv_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4092 unsigned int con
= 0;
4095 gpio_inout(0x180000,0x180000);
4096 if (v
->mode
& VIDEO_SOUND_LANG2
)
4098 if (v
->mode
& VIDEO_SOUND_STEREO
)
4100 gpio_bits(0x180000, con
);
4102 bttv_gpio_tracking(btv
,"terratv");
4104 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4105 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4110 winfast2000_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4112 unsigned long val
= 0;
4115 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4116 if (v
->mode
& VIDEO_SOUND_MONO
) /* Mono */
4118 if (v
->mode
& VIDEO_SOUND_LANG1
) /* Mono */
4120 if (v
->mode
& VIDEO_SOUND_LANG2
) /* SAP */
4122 if (v
->mode
& VIDEO_SOUND_STEREO
) /* Stereo */
4125 gpio_bits(0x430000, val
);
4127 bttv_gpio_tracking(btv
,"winfast2000");
4130 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4131 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4136 * Dariusz Kowalewski <darekk@automex.pl>
4137 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4138 * revision 9B has on-board TDA9874A sound decoder).
4140 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4141 * will mute this cards.
4144 pvbt878p9b_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4146 unsigned int val
= 0;
4148 if (btv
->radio_user
)
4152 if (v
->mode
& VIDEO_SOUND_MONO
) {
4155 if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
4156 || (v
->mode
& VIDEO_SOUND_STEREO
)) {
4160 gpio_bits(0x03,val
);
4162 bttv_gpio_tracking(btv
,"pvbt878p9b");
4165 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4166 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4171 * Dariusz Kowalewski <darekk@automex.pl>
4172 * sound control for FlyVideo 2000S (with tda9874 decoder)
4173 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4176 fv2000s_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4178 unsigned int val
= 0xffff;
4180 if (btv
->radio_user
)
4183 if (v
->mode
& VIDEO_SOUND_MONO
) {
4186 if ((v
->mode
& (VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
))
4187 || (v
->mode
& VIDEO_SOUND_STEREO
)) {
4188 val
= 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4190 if (val
!= 0xffff) {
4191 gpio_bits(0x1800, val
);
4193 bttv_gpio_tracking(btv
,"fv2000s");
4196 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4197 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4202 * sound control for Canopus WinDVR PCI
4203 * Masaki Suzuki <masaki@btree.org>
4206 windvr_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4208 unsigned long val
= 0;
4211 if (v
->mode
& VIDEO_SOUND_MONO
)
4213 if (v
->mode
& VIDEO_SOUND_LANG1
)
4215 if (v
->mode
& VIDEO_SOUND_LANG2
)
4217 if (v
->mode
& VIDEO_SOUND_STEREO
)
4220 gpio_bits(0x140000, val
);
4222 bttv_gpio_tracking(btv
,"windvr");
4225 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4226 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4231 * sound control for AD-TVK503
4232 * Hiroshi Takekawa <sian@big.or.jp>
4235 adtvk503_audio(struct bttv
*btv
, struct video_audio
*v
, int set
)
4237 unsigned int con
= 0xffffff;
4239 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4242 /* btor(***, BT848_GPIO_OUT_EN); */
4243 if (v
->mode
& VIDEO_SOUND_LANG1
)
4245 if (v
->mode
& VIDEO_SOUND_LANG2
)
4247 if (v
->mode
& VIDEO_SOUND_STEREO
)
4249 if (v
->mode
& VIDEO_SOUND_MONO
)
4251 if (con
!= 0xffffff) {
4252 gpio_bits(0x1e0000,con
);
4254 bttv_gpio_tracking(btv
, "adtvk503");
4257 v
->mode
= VIDEO_SOUND_MONO
| VIDEO_SOUND_STEREO
|
4258 VIDEO_SOUND_LANG1
| VIDEO_SOUND_LANG2
;
4262 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4264 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4265 * switch instead (CD22M3494E). This IC can have multiple active connections
4266 * between Xn (input) and Yn (output) pins. We need to clear any existing
4267 * connection prior to establish a new one, pulsing the STROBE pin.
4269 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4270 * GPIO pins are wired as:
4271 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4272 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4273 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4274 * GPIO[8] - - P3[5] (microcontroler)
4275 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4276 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4277 * GPINTR - - P3[4] (microcontroler)
4279 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4280 * configuration either directly (as we are doing) or using the microcontroler
4281 * which is also wired to I2C interface. I have no further info on the
4282 * microcontroler features, one would need to disassembly the firmware.
4283 * note: the vendor refused to give any information on this product, all
4284 * that stuff was found using a multimeter! :)
4286 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
)
4288 /* reset all conections */
4289 gpio_bits(0x200,0x200);
4291 gpio_bits(0x200,0x000);
4294 /* create a new conection */
4295 gpio_bits(0x480,0x080);
4296 gpio_bits(0x480,0x480);
4298 gpio_bits(0x480,0x080);
4302 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4304 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4305 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4306 * chips, ten eight input analog multiplexors, a not chip and a few
4309 * 16 inputs on a secondary bracket are provided and can be selected
4310 * from each of the four capture chips. Two of the eight input
4311 * multiplexors are used to select from any of the 16 input signals.
4313 * Unsupported hardware capabilities:
4314 * . A video output monitor on the secondary bracket can be selected from
4315 * one of the 878A chips.
4316 * . Another passthrough but I haven't spent any time investigating it.
4317 * . Digital I/O (logic level connected to GPIO) is available from an
4320 * The on chip input mux should always be set to 2.
4321 * GPIO[16:19] - Video input selection
4322 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4323 * GPIO[?:?] - Digital I/O.
4325 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4326 * determined what function (if any) it provides. With the microcontroller
4327 * and sync seperator chips a guess is that it might have to do with video
4328 * switching and maybe some digital I/O.
4330 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
)
4333 gpio_bits(0x0f0000, input
<< 16);
4336 static void tibetCS16_init(struct bttv
*btv
)
4338 /* enable gpio bits, mask obtained via btSpy */
4339 gpio_inout(0xffffff, 0x0f7fff);
4340 gpio_write(0x0f7fff);
4344 * The following routines for the Kodicom-4400r get a little mind-twisting.
4345 * There is a "master" controller and three "slave" controllers, together
4346 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4347 * The analog switch is controlled by the "master", but the detection order
4348 * of the four BT878A chips is in an order which I just don't understand.
4349 * The "master" is actually the second controller to be detected. The
4350 * logic on the board uses logical numbers for the 4 controlers, but
4351 * those numbers are different from the detection sequence. When working
4352 * with the analog switch, we need to "map" from the detection sequence
4353 * over to the board's logical controller number. This mapping sequence
4354 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4355 * unit 3, the second (which is the master) is logical unit 0, etc.
4356 * We need to maintain the status of the analog switch (which of the 16
4357 * cameras is connected to which of the 4 controllers). Rather than
4358 * add to the bttv structure for this, we use the data reserved for
4359 * the mbox (unused for this card type).
4363 * First a routine to set the analog switch, which controls which camera
4364 * is routed to which controller. The switch comprises an X-address
4365 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4366 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4367 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4368 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4369 * specified address. The idea is to set the address and data, then bring
4370 * STROBE high, and finally bring STROBE back to low.
4372 static void kodicom4400r_write(struct bttv
*btv
,
4373 unsigned char xaddr
,
4374 unsigned char yaddr
,
4375 unsigned char data
) {
4378 udata
= (data
<< 7) | ((yaddr
&3) << 4) | (xaddr
&0xf);
4379 gpio_bits(0x1ff, udata
); /* write ADDR and DAT */
4380 gpio_bits(0x1ff, udata
| (1 << 8)); /* strobe high */
4381 gpio_bits(0x1ff, udata
); /* strobe low */
4385 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4386 * use this routine. The routine finds the "master" for the card, maps
4387 * the controller number from the detected position over to the logical
4388 * number, writes the appropriate data to the analog switch, and housekeeps
4389 * the local copy of the switch information. The parameter 'input' is the
4390 * requested camera number (0 - 15).
4392 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
)
4397 static unsigned char map
[4] = {3, 0, 2, 1};
4399 mctlr
= master
[btv
->c
.nr
];
4400 if (mctlr
== NULL
) { /* ignore if master not yet detected */
4403 yaddr
= (btv
->c
.nr
- mctlr
->c
.nr
+ 1) & 3; /* the '&' is for safety */
4405 sw_status
= (char *)(&mctlr
->mbox_we
);
4406 xaddr
= input
& 0xf;
4407 /* Check if the controller/camera pair has changed, else ignore */
4408 if (sw_status
[yaddr
] != xaddr
)
4410 /* "open" the old switch, "close" the new one, save the new */
4411 kodicom4400r_write(mctlr
, sw_status
[yaddr
], yaddr
, 0);
4412 sw_status
[yaddr
] = xaddr
;
4413 kodicom4400r_write(mctlr
, xaddr
, yaddr
, 1);
4418 * During initialisation, we need to reset the analog switch. We
4419 * also preset the switch to map the 4 connectors on the card to the
4420 * *user's* (see above description of kodicom4400r_muxsel) channels
4423 static void kodicom4400r_init(struct bttv
*btv
)
4425 char *sw_status
= (char *)(&btv
->mbox_we
);
4428 gpio_inout(0x0003ff, 0x0003ff);
4429 gpio_write(1 << 9); /* reset MUX */
4431 /* Preset camera 0 to the 4 controllers */
4432 for (ix
=0; ix
<4; ix
++) {
4434 kodicom4400r_write(btv
, ix
, ix
, 1);
4437 * Since this is the "master", we need to set up the
4438 * other three controller chips' pointers to this structure
4439 * for later use in the muxsel routine.
4441 if ((btv
->c
.nr
<1) || (btv
->c
.nr
>BTTV_MAX
-3))
4443 master
[btv
->c
.nr
-1] = btv
;
4444 master
[btv
->c
.nr
] = btv
;
4445 master
[btv
->c
.nr
+1] = btv
;
4446 master
[btv
->c
.nr
+2] = btv
;
4449 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4450 * video multiplexers to provide up to 16 video inputs. These
4451 * multiplexers are controlled by the lower 8 GPIO pins of the
4452 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4454 * xxx0 is pin xxx of multiplexer U5,
4455 * yyy1 is pin yyy of multiplexer U2
4467 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
)
4469 static const int masks
[] = {
4470 ENB0
, ENB0
|IN00
, ENB0
|IN10
, ENB0
|IN00
|IN10
,
4471 ENA0
, ENA0
|IN00
, ENA0
|IN10
, ENA0
|IN00
|IN10
,
4472 ENB1
, ENB1
|IN01
, ENB1
|IN11
, ENB1
|IN01
|IN11
,
4473 ENA1
, ENA1
|IN01
, ENA1
|IN11
, ENA1
|IN01
|IN11
,
4475 gpio_write(masks
[input
%16]);
4477 static void picolo_tetra_init(struct bttv
*btv
)
4479 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4480 btwrite (0x08<<16,BT848_GPIO_DATA
);/*GPIO[19] [==> 4053 B+C] set to 1 */
4481 btwrite (0x04<<16,BT848_GPIO_DATA
);/*GPIO[18] [==> 4053 A] set to 1*/
4483 static void picolo_tetra_muxsel (struct bttv
* btv
, unsigned int input
)
4486 dprintk (KERN_DEBUG
"bttv%d : picolo_tetra_muxsel => input = %d\n",btv
->c
.nr
,input
);
4487 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4488 /*GPIO[20]&GPIO[21] used to choose the right input*/
4489 btwrite (input
<<20,BT848_GPIO_DATA
);
4494 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4496 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4497 * swichers to provide 16 channels to MUX0. The TDA8540's have
4498 * 4 indepedant outputs and as such the IVC120G also has the
4499 * optional "Monitor Out" bus. This allows the card to be looking
4500 * at one input while the monitor is looking at another.
4502 * Since I've couldn't be bothered figuring out how to add an
4503 * independant muxsel for the monitor bus, I've just set it to
4504 * whatever the card is looking at.
4506 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4507 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4509 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4510 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4511 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4512 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4516 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4517 #define I2C_TDA8540 0x90
4518 #define I2C_TDA8540_ALT1 0x92
4519 #define I2C_TDA8540_ALT2 0x94
4520 #define I2C_TDA8540_ALT3 0x96
4521 #define I2C_TDA8540_ALT4 0x98
4522 #define I2C_TDA8540_ALT5 0x9a
4523 #define I2C_TDA8540_ALT6 0x9c
4525 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
)
4528 int key
= input
% 4;
4529 int matrix
= input
/ 4;
4531 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4532 btv
->c
.nr
, input
, matrix
, key
);
4534 /* Handles the input selection on the TDA8540's */
4535 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x00,
4536 ((matrix
== 3) ? (key
| key
<< 2) : 0x00), 1);
4537 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x00,
4538 ((matrix
== 0) ? (key
| key
<< 2) : 0x00), 1);
4539 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x00,
4540 ((matrix
== 1) ? (key
| key
<< 2) : 0x00), 1);
4541 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x00,
4542 ((matrix
== 2) ? (key
| key
<< 2) : 0x00), 1);
4544 /* Handles the output enables on the TDA8540's */
4545 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x02,
4546 ((matrix
== 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4547 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x02,
4548 ((matrix
== 0) ? 0x03 : 0x00), 1); /* 1-4 */
4549 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x02,
4550 ((matrix
== 1) ? 0x03 : 0x00), 1); /* 5-8 */
4551 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x02,
4552 ((matrix
== 2) ? 0x03 : 0x00), 1); /* 9-12 */
4554 /* Selects MUX0 for input on the 878 */
4555 btaor((0)<<5, ~(3<<5), BT848_IFORM
);
4559 /* PXC200 muxsel helper
4560 * luke@syseng.anu.edu.au
4561 * another transplant
4562 * from Alessandro Rubini (rubini@linux.it)
4564 * There are 4 kinds of cards:
4565 * PXC200L which is bt848
4566 * PXC200F which is bt848 with PIC controlling mux
4567 * PXC200AL which is bt878
4568 * PXC200AF which is bt878 with PIC controlling mux
4570 #define PX_CFG_PXC200F 0x01
4571 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4572 #define PX_I2C_PIC 0x0f
4573 #define PX_PXC200A_CARDID 0x200a1295
4574 #define PX_I2C_CMD_CFG 0x00
4576 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
)
4581 unsigned char buf
[2];
4583 /* Read PIC config to determine if this is a PXC200F */
4587 rc
=bttv_I2CWrite(btv
,(PX_I2C_PIC
<<1),buf
[0],buf
[1],1);
4589 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv
->c
.nr
,rc
);
4590 /* not PXC ? do nothing */
4594 rc
=bttv_I2CRead(btv
,(PX_I2C_PIC
<<1),NULL
);
4595 if (!(rc
& PX_CFG_PXC200F
)) {
4596 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv
->c
.nr
,rc
);
4601 /* The multiplexer in the 200F is handled by the GPIO port */
4602 /* get correct mapping between inputs */
4603 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4604 /* ** not needed!? */
4607 /* make sure output pins are enabled */
4608 /* bitmask=0x30f; */
4610 /* check whether we have a PXC200A */
4611 if (btv
->cardid
== PX_PXC200A_CARDID
) {
4612 bitmask
^= 0x180; /* use 7 and 9, not 8 and 9 */
4613 bitmask
|= 7<<4; /* the DAC */
4615 btwrite(bitmask
, BT848_GPIO_OUT_EN
);
4617 bitmask
= btread(BT848_GPIO_DATA
);
4618 if (btv
->cardid
== PX_PXC200A_CARDID
)
4619 bitmask
= (bitmask
& ~0x280) | ((mux
& 2) << 8) | ((mux
& 1) << 7);
4620 else /* older device */
4621 bitmask
= (bitmask
& ~0x300) | ((mux
& 3) << 8);
4622 btwrite(bitmask
,BT848_GPIO_DATA
);
4625 * Was "to be safe, set the bt848 to input 0"
4626 * Actually, since it's ok at load time, better not messing
4627 * with these bits (on PXC200AF you need to set mux 2 here)
4629 * needed because bttv-driver sets mux before calling this function
4631 if (btv
->cardid
== PX_PXC200A_CARDID
)
4632 btaor(2<<5, ~BT848_IFORM_MUXSEL
, BT848_IFORM
);
4633 else /* older device */
4634 btand(~BT848_IFORM_MUXSEL
,BT848_IFORM
);
4636 printk(KERN_DEBUG
"bttv%d: setting input channel to:%d\n", btv
->c
.nr
,(int)mux
);
4639 /* ----------------------------------------------------------------------- */
4640 /* motherboard chipset specific stuff */
4642 void __devinit
bttv_check_chipset(void)
4644 int pcipci_fail
= 0;
4645 struct pci_dev
*dev
= NULL
;
4647 if (pci_pci_problems
& PCIPCI_FAIL
)
4649 if (pci_pci_problems
& (PCIPCI_TRITON
|PCIPCI_NATOMA
|PCIPCI_VIAETBF
))
4651 if (pci_pci_problems
& PCIPCI_VSFX
)
4653 #ifdef PCIPCI_ALIMAGIK
4654 if (pci_pci_problems
& PCIPCI_ALIMAGIK
)
4659 /* print warnings about any quirks found */
4661 printk(KERN_INFO
"bttv: Host bridge needs ETBF enabled.\n");
4663 printk(KERN_INFO
"bttv: Host bridge needs VSFX enabled.\n");
4665 printk(KERN_WARNING
"bttv: BT848 and your chipset may not work together.\n");
4667 printk(KERN_WARNING
"bttv: overlay will be disabled.\n");
4670 printk(KERN_WARNING
"bttv: overlay forced. Use this option at your own risk.\n");
4673 if (UNSET
!= latency
)
4674 printk(KERN_INFO
"bttv: pci latency fixup [%d]\n",latency
);
4675 while ((dev
= pci_get_device(PCI_VENDOR_ID_INTEL
,
4676 PCI_DEVICE_ID_INTEL_82441
, dev
))) {
4678 pci_read_config_byte(dev
, 0x53, &b
);
4680 printk(KERN_INFO
"bttv: Host bridge: 82441FX Natoma, "
4681 "bufcon=0x%02x\n",b
);
4685 int __devinit
bttv_handle_chipset(struct bttv
*btv
)
4687 unsigned char command
;
4689 if (!triton1
&& !vsfx
&& UNSET
== latency
)
4694 printk(KERN_INFO
"bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv
->c
.nr
);
4695 if (vsfx
&& btv
->id
>= 878)
4696 printk(KERN_INFO
"bttv%d: enabling VSFX\n",btv
->c
.nr
);
4697 if (UNSET
!= latency
)
4698 printk(KERN_INFO
"bttv%d: setting pci timer to %d\n",
4702 if (btv
->id
< 878) {
4703 /* bt848 (mis)uses a bit in the irq mask for etbf */
4705 btv
->triton1
= BT848_INT_ETBF
;
4707 /* bt878 has a bit in the pci config space for it */
4708 pci_read_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, &command
);
4710 command
|= BT878_EN_TBFX
;
4712 command
|= BT878_EN_VSFX
;
4713 pci_write_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, command
);
4715 if (UNSET
!= latency
)
4716 pci_write_config_byte(btv
->c
.pci
, PCI_LATENCY_TIMER
, latency
);