2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/delay.h>
13 * qla2x00_mailbox_command
14 * Issue mailbox command and waits for completion.
17 * ha = adapter block pointer.
18 * mcp = driver internal mbx struct pointer.
21 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
24 * 0 : QLA_SUCCESS = cmd performed success
25 * 1 : QLA_FUNCTION_FAILED (error encountered)
26 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
32 qla2x00_mailbox_command(scsi_qla_host_t
*vha
, mbx_cmd_t
*mcp
)
35 unsigned long flags
= 0;
36 device_reg_t __iomem
*reg
;
41 uint16_t __iomem
*optr
;
44 unsigned long wait_time
;
45 struct qla_hw_data
*ha
= vha
->hw
;
46 scsi_qla_host_t
*base_vha
= pci_get_drvdata(ha
->pdev
);
49 io_lock_on
= base_vha
->flags
.init_done
;
52 abort_active
= test_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
54 DEBUG11(printk("%s(%ld): entered.\n", __func__
, base_vha
->host_no
));
57 * Wait for active mailbox commands to finish by waiting at most tov
58 * seconds. This is to serialize actual issuing of mailbox cmds during
61 if (!wait_for_completion_timeout(&ha
->mbx_cmd_comp
, mcp
->tov
* HZ
)) {
62 /* Timeout occurred. Return error. */
63 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
64 "Exiting.\n", __func__
, base_vha
->host_no
));
65 return QLA_FUNCTION_TIMEOUT
;
68 ha
->flags
.mbox_busy
= 1;
69 /* Save mailbox command for debug */
72 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
73 base_vha
->host_no
, mcp
->mb
[0]));
75 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
77 /* Load mailbox registers. */
78 if (IS_FWI2_CAPABLE(ha
))
79 optr
= (uint16_t __iomem
*)®
->isp24
.mailbox0
;
81 optr
= (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 0);
87 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
88 if (IS_QLA2200(ha
) && cnt
== 8)
90 (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 8);
92 WRT_REG_WORD(optr
, *iptr
);
99 #if defined(QL_DEBUG_LEVEL_1)
100 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
101 __func__
, base_vha
->host_no
);
102 qla2x00_dump_buffer((uint8_t *)mcp
->mb
, 16);
104 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x10), 16);
106 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x20), 8);
108 printk("%s(%ld): I/O address = %p.\n", __func__
, base_vha
->host_no
,
110 qla2x00_dump_regs(base_vha
);
113 /* Issue set host interrupt command to send cmd out. */
114 ha
->flags
.mbox_int
= 0;
115 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
117 /* Unlock mbx registers and wait for interrupt */
118 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
119 "jiffies=%lx.\n", __func__
, base_vha
->host_no
, jiffies
));
121 /* Wait for mbx cmd completion until timeout */
123 if ((!abort_active
&& io_lock_on
) || IS_NOPOLLING_TYPE(ha
)) {
124 set_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
126 if (IS_FWI2_CAPABLE(ha
))
127 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
129 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
130 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
132 wait_for_completion_timeout(&ha
->mbx_intr_comp
, mcp
->tov
* HZ
);
134 clear_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
137 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__
,
138 base_vha
->host_no
, command
));
140 if (IS_FWI2_CAPABLE(ha
))
141 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
143 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
144 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
146 wait_time
= jiffies
+ mcp
->tov
* HZ
; /* wait at most tov secs */
147 while (!ha
->flags
.mbox_int
) {
148 if (time_after(jiffies
, wait_time
))
151 /* Check for pending interrupts. */
152 qla2x00_poll(ha
->rsp_q_map
[0]);
154 if (command
!= MBC_LOAD_RISC_RAM_EXTENDED
&&
160 /* Check whether we timed out */
161 if (ha
->flags
.mbox_int
) {
164 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__
,
165 base_vha
->host_no
, command
));
167 /* Got interrupt. Clear the flag. */
168 ha
->flags
.mbox_int
= 0;
169 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
171 if (ha
->mailbox_out
[0] != MBS_COMMAND_COMPLETE
)
172 rval
= QLA_FUNCTION_FAILED
;
174 /* Load return mailbox registers. */
176 iptr
= (uint16_t *)&ha
->mailbox_out
[0];
178 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
188 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
189 defined(QL_DEBUG_LEVEL_11)
193 if (IS_FWI2_CAPABLE(ha
)) {
194 mb0
= RD_REG_WORD(®
->isp24
.mailbox0
);
195 ictrl
= RD_REG_DWORD(®
->isp24
.ictrl
);
197 mb0
= RD_MAILBOX_REG(ha
, ®
->isp
, 0);
198 ictrl
= RD_REG_WORD(®
->isp
.ictrl
);
200 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
201 __func__
, base_vha
->host_no
, command
);
202 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__
,
203 base_vha
->host_no
, ictrl
, jiffies
);
204 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__
,
205 base_vha
->host_no
, mb0
);
206 qla2x00_dump_regs(base_vha
);
209 rval
= QLA_FUNCTION_TIMEOUT
;
212 ha
->flags
.mbox_busy
= 0;
217 if ((abort_active
|| !io_lock_on
) && !IS_NOPOLLING_TYPE(ha
)) {
218 DEBUG11(printk("%s(%ld): checking for additional resp "
219 "interrupt.\n", __func__
, base_vha
->host_no
));
221 /* polling mode for non isp_abort commands. */
222 qla2x00_poll(ha
->rsp_q_map
[0]);
225 if (rval
== QLA_FUNCTION_TIMEOUT
&&
226 mcp
->mb
[0] != MBC_GEN_SYSTEM_ERROR
) {
227 if (!io_lock_on
|| (mcp
->flags
& IOCTL_CMD
)) {
228 /* not in dpc. schedule it for dpc to take over. */
229 DEBUG(printk("%s(%ld): timeout schedule "
230 "isp_abort_needed.\n", __func__
,
232 DEBUG2_3_11(printk("%s(%ld): timeout schedule "
233 "isp_abort_needed.\n", __func__
,
235 qla_printk(KERN_WARNING
, ha
,
236 "Mailbox command timeout occurred. Scheduling ISP "
238 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
239 qla2xxx_wake_dpc(vha
);
240 } else if (!abort_active
) {
241 /* call abort directly since we are in the DPC thread */
242 DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
243 __func__
, base_vha
->host_no
));
244 DEBUG2_3_11(printk("%s(%ld): timeout calling "
245 "abort_isp\n", __func__
, base_vha
->host_no
));
246 qla_printk(KERN_WARNING
, ha
,
247 "Mailbox command timeout occurred. Issuing ISP "
250 set_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
251 clear_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
252 if (qla2x00_abort_isp(base_vha
)) {
253 /* Failed. retry later. */
254 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
256 clear_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
257 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__
,
259 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
260 __func__
, base_vha
->host_no
));
264 /* Allow next mbx cmd to come in. */
265 complete(&ha
->mbx_cmd_comp
);
268 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
269 "mbx2=%x, cmd=%x ****\n", __func__
, base_vha
->host_no
,
270 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], command
));
272 DEBUG11(printk("%s(%ld): done.\n", __func__
,
280 qla2x00_load_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t risc_addr
,
281 uint32_t risc_code_size
)
284 struct qla_hw_data
*ha
= vha
->hw
;
286 mbx_cmd_t
*mcp
= &mc
;
288 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
290 if (MSW(risc_addr
) || IS_FWI2_CAPABLE(ha
)) {
291 mcp
->mb
[0] = MBC_LOAD_RISC_RAM_EXTENDED
;
292 mcp
->mb
[8] = MSW(risc_addr
);
293 mcp
->out_mb
= MBX_8
|MBX_0
;
295 mcp
->mb
[0] = MBC_LOAD_RISC_RAM
;
298 mcp
->mb
[1] = LSW(risc_addr
);
299 mcp
->mb
[2] = MSW(req_dma
);
300 mcp
->mb
[3] = LSW(req_dma
);
301 mcp
->mb
[6] = MSW(MSD(req_dma
));
302 mcp
->mb
[7] = LSW(MSD(req_dma
));
303 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
304 if (IS_FWI2_CAPABLE(ha
)) {
305 mcp
->mb
[4] = MSW(risc_code_size
);
306 mcp
->mb
[5] = LSW(risc_code_size
);
307 mcp
->out_mb
|= MBX_5
|MBX_4
;
309 mcp
->mb
[4] = LSW(risc_code_size
);
310 mcp
->out_mb
|= MBX_4
;
314 mcp
->tov
= MBX_TOV_SECONDS
;
316 rval
= qla2x00_mailbox_command(vha
, mcp
);
318 if (rval
!= QLA_SUCCESS
) {
319 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
320 vha
->host_no
, rval
, mcp
->mb
[0]));
322 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
330 * Start adapter firmware.
333 * ha = adapter block pointer.
334 * TARGET_QUEUE_LOCK must be released.
335 * ADAPTER_STATE_LOCK must be released.
338 * qla2x00 local function return status code.
344 qla2x00_execute_fw(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
347 struct qla_hw_data
*ha
= vha
->hw
;
349 mbx_cmd_t
*mcp
= &mc
;
351 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
353 mcp
->mb
[0] = MBC_EXECUTE_FIRMWARE
;
356 if (IS_FWI2_CAPABLE(ha
)) {
357 mcp
->mb
[1] = MSW(risc_addr
);
358 mcp
->mb
[2] = LSW(risc_addr
);
361 mcp
->out_mb
|= MBX_4
|MBX_3
|MBX_2
|MBX_1
;
364 mcp
->mb
[1] = LSW(risc_addr
);
365 mcp
->out_mb
|= MBX_1
;
366 if (IS_QLA2322(ha
) || IS_QLA6322(ha
)) {
368 mcp
->out_mb
|= MBX_2
;
372 mcp
->tov
= MBX_TOV_SECONDS
;
374 rval
= qla2x00_mailbox_command(vha
, mcp
);
376 if (rval
!= QLA_SUCCESS
) {
377 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
378 vha
->host_no
, rval
, mcp
->mb
[0]));
380 if (IS_FWI2_CAPABLE(ha
)) {
381 DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
382 __func__
, vha
->host_no
, mcp
->mb
[1]));
384 DEBUG11(printk("%s(%ld): done.\n", __func__
,
393 * qla2x00_get_fw_version
394 * Get firmware version.
397 * ha: adapter state pointer.
398 * major: pointer for major number.
399 * minor: pointer for minor number.
400 * subminor: pointer for subminor number.
403 * qla2x00 local function return status code.
409 qla2x00_get_fw_version(scsi_qla_host_t
*vha
, uint16_t *major
, uint16_t *minor
,
410 uint16_t *subminor
, uint16_t *attributes
, uint32_t *memory
, uint8_t *mpi
,
415 mbx_cmd_t
*mcp
= &mc
;
417 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
419 mcp
->mb
[0] = MBC_GET_FIRMWARE_VERSION
;
421 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
422 if (IS_QLA81XX(vha
->hw
))
423 mcp
->in_mb
|= MBX_13
|MBX_12
|MBX_11
|MBX_10
;
425 mcp
->tov
= MBX_TOV_SECONDS
;
426 rval
= qla2x00_mailbox_command(vha
, mcp
);
428 /* Return mailbox data. */
431 *subminor
= mcp
->mb
[3];
432 *attributes
= mcp
->mb
[6];
433 if (IS_QLA2100(vha
->hw
) || IS_QLA2200(vha
->hw
))
434 *memory
= 0x1FFFF; /* Defaults to 128KB. */
436 *memory
= (mcp
->mb
[5] << 16) | mcp
->mb
[4];
437 if (IS_QLA81XX(vha
->hw
)) {
438 mpi
[0] = mcp
->mb
[10] >> 8;
439 mpi
[1] = mcp
->mb
[10] & 0xff;
440 mpi
[2] = mcp
->mb
[11] >> 8;
441 mpi
[3] = mcp
->mb
[11] & 0xff;
442 *mpi_caps
= (mcp
->mb
[12] << 16) | mcp
->mb
[13];
445 if (rval
!= QLA_SUCCESS
) {
447 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
448 vha
->host_no
, rval
));
451 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
456 * qla2x00_get_fw_options
457 * Set firmware options.
460 * ha = adapter block pointer.
461 * fwopt = pointer for firmware options.
464 * qla2x00 local function return status code.
470 qla2x00_get_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
474 mbx_cmd_t
*mcp
= &mc
;
476 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
478 mcp
->mb
[0] = MBC_GET_FIRMWARE_OPTION
;
480 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
481 mcp
->tov
= MBX_TOV_SECONDS
;
483 rval
= qla2x00_mailbox_command(vha
, mcp
);
485 if (rval
!= QLA_SUCCESS
) {
487 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
488 vha
->host_no
, rval
));
490 fwopts
[0] = mcp
->mb
[0];
491 fwopts
[1] = mcp
->mb
[1];
492 fwopts
[2] = mcp
->mb
[2];
493 fwopts
[3] = mcp
->mb
[3];
495 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
503 * qla2x00_set_fw_options
504 * Set firmware options.
507 * ha = adapter block pointer.
508 * fwopt = pointer for firmware options.
511 * qla2x00 local function return status code.
517 qla2x00_set_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
521 mbx_cmd_t
*mcp
= &mc
;
523 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
525 mcp
->mb
[0] = MBC_SET_FIRMWARE_OPTION
;
526 mcp
->mb
[1] = fwopts
[1];
527 mcp
->mb
[2] = fwopts
[2];
528 mcp
->mb
[3] = fwopts
[3];
529 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
531 if (IS_FWI2_CAPABLE(vha
->hw
)) {
534 mcp
->mb
[10] = fwopts
[10];
535 mcp
->mb
[11] = fwopts
[11];
536 mcp
->mb
[12] = 0; /* Undocumented, but used */
537 mcp
->out_mb
|= MBX_12
|MBX_11
|MBX_10
;
539 mcp
->tov
= MBX_TOV_SECONDS
;
541 rval
= qla2x00_mailbox_command(vha
, mcp
);
543 fwopts
[0] = mcp
->mb
[0];
545 if (rval
!= QLA_SUCCESS
) {
547 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__
,
548 vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
551 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
558 * qla2x00_mbx_reg_test
559 * Mailbox register wrap test.
562 * ha = adapter block pointer.
563 * TARGET_QUEUE_LOCK must be released.
564 * ADAPTER_STATE_LOCK must be released.
567 * qla2x00 local function return status code.
573 qla2x00_mbx_reg_test(scsi_qla_host_t
*vha
)
577 mbx_cmd_t
*mcp
= &mc
;
579 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", vha
->host_no
));
581 mcp
->mb
[0] = MBC_MAILBOX_REGISTER_TEST
;
589 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
590 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
591 mcp
->tov
= MBX_TOV_SECONDS
;
593 rval
= qla2x00_mailbox_command(vha
, mcp
);
595 if (rval
== QLA_SUCCESS
) {
596 if (mcp
->mb
[1] != 0xAAAA || mcp
->mb
[2] != 0x5555 ||
597 mcp
->mb
[3] != 0xAA55 || mcp
->mb
[4] != 0x55AA)
598 rval
= QLA_FUNCTION_FAILED
;
599 if (mcp
->mb
[5] != 0xA5A5 || mcp
->mb
[6] != 0x5A5A ||
600 mcp
->mb
[7] != 0x2525)
601 rval
= QLA_FUNCTION_FAILED
;
604 if (rval
!= QLA_SUCCESS
) {
606 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
607 vha
->host_no
, rval
));
610 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
618 * qla2x00_verify_checksum
619 * Verify firmware checksum.
622 * ha = adapter block pointer.
623 * TARGET_QUEUE_LOCK must be released.
624 * ADAPTER_STATE_LOCK must be released.
627 * qla2x00 local function return status code.
633 qla2x00_verify_checksum(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
637 mbx_cmd_t
*mcp
= &mc
;
639 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
641 mcp
->mb
[0] = MBC_VERIFY_CHECKSUM
;
644 if (IS_FWI2_CAPABLE(vha
->hw
)) {
645 mcp
->mb
[1] = MSW(risc_addr
);
646 mcp
->mb
[2] = LSW(risc_addr
);
647 mcp
->out_mb
|= MBX_2
|MBX_1
;
648 mcp
->in_mb
|= MBX_2
|MBX_1
;
650 mcp
->mb
[1] = LSW(risc_addr
);
651 mcp
->out_mb
|= MBX_1
;
655 mcp
->tov
= MBX_TOV_SECONDS
;
657 rval
= qla2x00_mailbox_command(vha
, mcp
);
659 if (rval
!= QLA_SUCCESS
) {
660 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__
,
661 vha
->host_no
, rval
, IS_FWI2_CAPABLE(vha
->hw
) ?
662 (mcp
->mb
[2] << 16) | mcp
->mb
[1]: mcp
->mb
[1]));
664 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
672 * Issue IOCB using mailbox command
675 * ha = adapter state pointer.
676 * buffer = buffer pointer.
677 * phys_addr = physical address of buffer.
678 * size = size of buffer.
679 * TARGET_QUEUE_LOCK must be released.
680 * ADAPTER_STATE_LOCK must be released.
683 * qla2x00 local function return status code.
689 qla2x00_issue_iocb_timeout(scsi_qla_host_t
*vha
, void *buffer
,
690 dma_addr_t phys_addr
, size_t size
, uint32_t tov
)
694 mbx_cmd_t
*mcp
= &mc
;
696 mcp
->mb
[0] = MBC_IOCB_COMMAND_A64
;
698 mcp
->mb
[2] = MSW(phys_addr
);
699 mcp
->mb
[3] = LSW(phys_addr
);
700 mcp
->mb
[6] = MSW(MSD(phys_addr
));
701 mcp
->mb
[7] = LSW(MSD(phys_addr
));
702 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
703 mcp
->in_mb
= MBX_2
|MBX_0
;
706 rval
= qla2x00_mailbox_command(vha
, mcp
);
708 if (rval
!= QLA_SUCCESS
) {
710 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
711 vha
->host_no
, rval
));
713 sts_entry_t
*sts_entry
= (sts_entry_t
*) buffer
;
715 /* Mask reserved bits. */
716 sts_entry
->entry_status
&=
717 IS_FWI2_CAPABLE(vha
->hw
) ? RF_MASK_24XX
: RF_MASK
;
724 qla2x00_issue_iocb(scsi_qla_host_t
*vha
, void *buffer
, dma_addr_t phys_addr
,
727 return qla2x00_issue_iocb_timeout(vha
, buffer
, phys_addr
, size
,
732 * qla2x00_abort_command
733 * Abort command aborts a specified IOCB.
736 * ha = adapter block pointer.
737 * sp = SB structure pointer.
740 * qla2x00 local function return status code.
746 qla2x00_abort_command(scsi_qla_host_t
*vha
, srb_t
*sp
, struct req_que
*req
)
748 unsigned long flags
= 0;
753 mbx_cmd_t
*mcp
= &mc
;
754 struct qla_hw_data
*ha
= vha
->hw
;
756 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha
->host_no
));
760 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
761 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
762 if (req
->outstanding_cmds
[handle
] == sp
)
765 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
767 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
768 /* command not found */
769 return QLA_FUNCTION_FAILED
;
772 mcp
->mb
[0] = MBC_ABORT_COMMAND
;
773 if (HAS_EXTENDED_IDS(ha
))
774 mcp
->mb
[1] = fcport
->loop_id
;
776 mcp
->mb
[1] = fcport
->loop_id
<< 8;
777 mcp
->mb
[2] = (uint16_t)handle
;
778 mcp
->mb
[3] = (uint16_t)(handle
>> 16);
779 mcp
->mb
[6] = (uint16_t)sp
->cmd
->device
->lun
;
780 mcp
->out_mb
= MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
782 mcp
->tov
= MBX_TOV_SECONDS
;
784 rval
= qla2x00_mailbox_command(vha
, mcp
);
786 if (rval
!= QLA_SUCCESS
) {
787 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
788 vha
->host_no
, rval
));
790 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
798 qla2x00_abort_target(struct fc_port
*fcport
, unsigned int l
)
802 mbx_cmd_t
*mcp
= &mc
;
803 scsi_qla_host_t
*vha
;
807 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
811 req
= vha
->hw
->req_q_map
[0];
812 rsp
= vha
->hw
->rsp_q_map
[0];
813 mcp
->mb
[0] = MBC_ABORT_TARGET
;
814 mcp
->out_mb
= MBX_9
|MBX_2
|MBX_1
|MBX_0
;
815 if (HAS_EXTENDED_IDS(vha
->hw
)) {
816 mcp
->mb
[1] = fcport
->loop_id
;
818 mcp
->out_mb
|= MBX_10
;
820 mcp
->mb
[1] = fcport
->loop_id
<< 8;
822 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
823 mcp
->mb
[9] = vha
->vp_idx
;
826 mcp
->tov
= MBX_TOV_SECONDS
;
828 rval
= qla2x00_mailbox_command(vha
, mcp
);
829 if (rval
!= QLA_SUCCESS
) {
830 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
831 vha
->host_no
, rval
));
834 /* Issue marker IOCB. */
835 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, 0,
837 if (rval2
!= QLA_SUCCESS
) {
838 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
839 "(%x).\n", __func__
, vha
->host_no
, rval2
));
841 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
848 qla2x00_lun_reset(struct fc_port
*fcport
, unsigned int l
)
852 mbx_cmd_t
*mcp
= &mc
;
853 scsi_qla_host_t
*vha
;
857 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
860 req
= vha
->hw
->req_q_map
[0];
861 rsp
= vha
->hw
->rsp_q_map
[0];
862 mcp
->mb
[0] = MBC_LUN_RESET
;
863 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
864 if (HAS_EXTENDED_IDS(vha
->hw
))
865 mcp
->mb
[1] = fcport
->loop_id
;
867 mcp
->mb
[1] = fcport
->loop_id
<< 8;
870 mcp
->mb
[9] = vha
->vp_idx
;
873 mcp
->tov
= MBX_TOV_SECONDS
;
875 rval
= qla2x00_mailbox_command(vha
, mcp
);
876 if (rval
!= QLA_SUCCESS
) {
877 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
878 vha
->host_no
, rval
));
881 /* Issue marker IOCB. */
882 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
884 if (rval2
!= QLA_SUCCESS
) {
885 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
886 "(%x).\n", __func__
, vha
->host_no
, rval2
));
888 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
895 * qla2x00_get_adapter_id
896 * Get adapter ID and topology.
899 * ha = adapter block pointer.
900 * id = pointer for loop ID.
901 * al_pa = pointer for AL_PA.
902 * area = pointer for area.
903 * domain = pointer for domain.
904 * top = pointer for topology.
905 * TARGET_QUEUE_LOCK must be released.
906 * ADAPTER_STATE_LOCK must be released.
909 * qla2x00 local function return status code.
915 qla2x00_get_adapter_id(scsi_qla_host_t
*vha
, uint16_t *id
, uint8_t *al_pa
,
916 uint8_t *area
, uint8_t *domain
, uint16_t *top
, uint16_t *sw_cap
)
920 mbx_cmd_t
*mcp
= &mc
;
922 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
925 mcp
->mb
[0] = MBC_GET_ADAPTER_LOOP_ID
;
926 mcp
->mb
[9] = vha
->vp_idx
;
927 mcp
->out_mb
= MBX_9
|MBX_0
;
928 mcp
->in_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
929 mcp
->tov
= MBX_TOV_SECONDS
;
931 rval
= qla2x00_mailbox_command(vha
, mcp
);
932 if (mcp
->mb
[0] == MBS_COMMAND_ERROR
)
933 rval
= QLA_COMMAND_ERROR
;
934 else if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
935 rval
= QLA_INVALID_COMMAND
;
939 *al_pa
= LSB(mcp
->mb
[2]);
940 *area
= MSB(mcp
->mb
[2]);
941 *domain
= LSB(mcp
->mb
[3]);
943 *sw_cap
= mcp
->mb
[7];
945 if (rval
!= QLA_SUCCESS
) {
947 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
948 vha
->host_no
, rval
));
951 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
959 * qla2x00_get_retry_cnt
960 * Get current firmware login retry count and delay.
963 * ha = adapter block pointer.
964 * retry_cnt = pointer to login retry count.
965 * tov = pointer to login timeout value.
968 * qla2x00 local function return status code.
974 qla2x00_get_retry_cnt(scsi_qla_host_t
*vha
, uint8_t *retry_cnt
, uint8_t *tov
,
980 mbx_cmd_t
*mcp
= &mc
;
982 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
985 mcp
->mb
[0] = MBC_GET_RETRY_COUNT
;
987 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
988 mcp
->tov
= MBX_TOV_SECONDS
;
990 rval
= qla2x00_mailbox_command(vha
, mcp
);
992 if (rval
!= QLA_SUCCESS
) {
994 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
995 vha
->host_no
, mcp
->mb
[0]));
997 /* Convert returned data and check our values. */
998 *r_a_tov
= mcp
->mb
[3] / 2;
999 ratov
= (mcp
->mb
[3]/2) / 10; /* mb[3] value is in 100ms */
1000 if (mcp
->mb
[1] * ratov
> (*retry_cnt
) * (*tov
)) {
1001 /* Update to the larger values */
1002 *retry_cnt
= (uint8_t)mcp
->mb
[1];
1006 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
1007 "ratov=%d.\n", vha
->host_no
, mcp
->mb
[3], ratov
));
1014 * qla2x00_init_firmware
1015 * Initialize adapter firmware.
1018 * ha = adapter block pointer.
1019 * dptr = Initialization control block pointer.
1020 * size = size of initialization control block.
1021 * TARGET_QUEUE_LOCK must be released.
1022 * ADAPTER_STATE_LOCK must be released.
1025 * qla2x00 local function return status code.
1031 qla2x00_init_firmware(scsi_qla_host_t
*vha
, uint16_t size
)
1035 mbx_cmd_t
*mcp
= &mc
;
1036 struct qla_hw_data
*ha
= vha
->hw
;
1038 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
1041 if (ha
->flags
.npiv_supported
)
1042 mcp
->mb
[0] = MBC_MID_INITIALIZE_FIRMWARE
;
1044 mcp
->mb
[0] = MBC_INITIALIZE_FIRMWARE
;
1046 mcp
->mb
[2] = MSW(ha
->init_cb_dma
);
1047 mcp
->mb
[3] = LSW(ha
->init_cb_dma
);
1050 mcp
->mb
[6] = MSW(MSD(ha
->init_cb_dma
));
1051 mcp
->mb
[7] = LSW(MSD(ha
->init_cb_dma
));
1052 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1053 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_0
;
1054 mcp
->buf_size
= size
;
1055 mcp
->flags
= MBX_DMA_OUT
;
1056 mcp
->tov
= MBX_TOV_SECONDS
;
1057 rval
= qla2x00_mailbox_command(vha
, mcp
);
1059 if (rval
!= QLA_SUCCESS
) {
1061 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
1063 vha
->host_no
, rval
, mcp
->mb
[0]));
1066 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
1074 * qla2x00_get_port_database
1075 * Issue normal/enhanced get port database mailbox command
1076 * and copy device name as necessary.
1079 * ha = adapter state pointer.
1080 * dev = structure pointer.
1081 * opt = enhanced cmd option byte.
1084 * qla2x00 local function return status code.
1090 qla2x00_get_port_database(scsi_qla_host_t
*vha
, fc_port_t
*fcport
, uint8_t opt
)
1094 mbx_cmd_t
*mcp
= &mc
;
1095 port_database_t
*pd
;
1096 struct port_database_24xx
*pd24
;
1098 struct qla_hw_data
*ha
= vha
->hw
;
1100 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1103 pd
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pd_dma
);
1105 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
1106 "structure.\n", __func__
, vha
->host_no
));
1107 return QLA_MEMORY_ALLOC_FAILED
;
1109 memset(pd
, 0, max(PORT_DATABASE_SIZE
, PORT_DATABASE_24XX_SIZE
));
1111 mcp
->mb
[0] = MBC_GET_PORT_DATABASE
;
1112 if (opt
!= 0 && !IS_FWI2_CAPABLE(ha
))
1113 mcp
->mb
[0] = MBC_ENHANCED_GET_PORT_DATABASE
;
1114 mcp
->mb
[2] = MSW(pd_dma
);
1115 mcp
->mb
[3] = LSW(pd_dma
);
1116 mcp
->mb
[6] = MSW(MSD(pd_dma
));
1117 mcp
->mb
[7] = LSW(MSD(pd_dma
));
1118 mcp
->mb
[9] = vha
->vp_idx
;
1119 mcp
->out_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1121 if (IS_FWI2_CAPABLE(ha
)) {
1122 mcp
->mb
[1] = fcport
->loop_id
;
1124 mcp
->out_mb
|= MBX_10
|MBX_1
;
1125 mcp
->in_mb
|= MBX_1
;
1126 } else if (HAS_EXTENDED_IDS(ha
)) {
1127 mcp
->mb
[1] = fcport
->loop_id
;
1129 mcp
->out_mb
|= MBX_10
|MBX_1
;
1131 mcp
->mb
[1] = fcport
->loop_id
<< 8 | opt
;
1132 mcp
->out_mb
|= MBX_1
;
1134 mcp
->buf_size
= IS_FWI2_CAPABLE(ha
) ?
1135 PORT_DATABASE_24XX_SIZE
: PORT_DATABASE_SIZE
;
1136 mcp
->flags
= MBX_DMA_IN
;
1137 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1138 rval
= qla2x00_mailbox_command(vha
, mcp
);
1139 if (rval
!= QLA_SUCCESS
)
1142 if (IS_FWI2_CAPABLE(ha
)) {
1143 pd24
= (struct port_database_24xx
*) pd
;
1145 /* Check for logged in state. */
1146 if (pd24
->current_login_state
!= PDS_PRLI_COMPLETE
&&
1147 pd24
->last_login_state
!= PDS_PRLI_COMPLETE
) {
1148 DEBUG2(printk("%s(%ld): Unable to verify "
1149 "login-state (%x/%x) for loop_id %x\n",
1150 __func__
, vha
->host_no
,
1151 pd24
->current_login_state
,
1152 pd24
->last_login_state
, fcport
->loop_id
));
1153 rval
= QLA_FUNCTION_FAILED
;
1157 /* Names are little-endian. */
1158 memcpy(fcport
->node_name
, pd24
->node_name
, WWN_SIZE
);
1159 memcpy(fcport
->port_name
, pd24
->port_name
, WWN_SIZE
);
1161 /* Get port_id of device. */
1162 fcport
->d_id
.b
.domain
= pd24
->port_id
[0];
1163 fcport
->d_id
.b
.area
= pd24
->port_id
[1];
1164 fcport
->d_id
.b
.al_pa
= pd24
->port_id
[2];
1165 fcport
->d_id
.b
.rsvd_1
= 0;
1167 /* If not target must be initiator or unknown type. */
1168 if ((pd24
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1169 fcport
->port_type
= FCT_INITIATOR
;
1171 fcport
->port_type
= FCT_TARGET
;
1173 /* Check for logged in state. */
1174 if (pd
->master_state
!= PD_STATE_PORT_LOGGED_IN
&&
1175 pd
->slave_state
!= PD_STATE_PORT_LOGGED_IN
) {
1176 rval
= QLA_FUNCTION_FAILED
;
1180 /* Names are little-endian. */
1181 memcpy(fcport
->node_name
, pd
->node_name
, WWN_SIZE
);
1182 memcpy(fcport
->port_name
, pd
->port_name
, WWN_SIZE
);
1184 /* Get port_id of device. */
1185 fcport
->d_id
.b
.domain
= pd
->port_id
[0];
1186 fcport
->d_id
.b
.area
= pd
->port_id
[3];
1187 fcport
->d_id
.b
.al_pa
= pd
->port_id
[2];
1188 fcport
->d_id
.b
.rsvd_1
= 0;
1190 /* Check for device require authentication. */
1191 pd
->common_features
& BIT_5
? (fcport
->flags
|= FCF_AUTH_REQ
) :
1192 (fcport
->flags
&= ~FCF_AUTH_REQ
);
1194 /* If not target must be initiator or unknown type. */
1195 if ((pd
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1196 fcport
->port_type
= FCT_INITIATOR
;
1198 fcport
->port_type
= FCT_TARGET
;
1200 /* Passback COS information. */
1201 fcport
->supported_classes
= (pd
->options
& BIT_4
) ?
1202 FC_COS_CLASS2
: FC_COS_CLASS3
;
1206 dma_pool_free(ha
->s_dma_pool
, pd
, pd_dma
);
1208 if (rval
!= QLA_SUCCESS
) {
1209 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
1210 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1212 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1219 * qla2x00_get_firmware_state
1220 * Get adapter firmware state.
1223 * ha = adapter block pointer.
1224 * dptr = pointer for firmware state.
1225 * TARGET_QUEUE_LOCK must be released.
1226 * ADAPTER_STATE_LOCK must be released.
1229 * qla2x00 local function return status code.
1235 qla2x00_get_firmware_state(scsi_qla_host_t
*vha
, uint16_t *states
)
1239 mbx_cmd_t
*mcp
= &mc
;
1241 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
1244 mcp
->mb
[0] = MBC_GET_FIRMWARE_STATE
;
1245 mcp
->out_mb
= MBX_0
;
1246 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1247 mcp
->tov
= MBX_TOV_SECONDS
;
1249 rval
= qla2x00_mailbox_command(vha
, mcp
);
1251 /* Return firmware states. */
1252 states
[0] = mcp
->mb
[1];
1253 states
[1] = mcp
->mb
[2];
1254 states
[2] = mcp
->mb
[3];
1256 if (rval
!= QLA_SUCCESS
) {
1258 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
1259 "failed=%x.\n", vha
->host_no
, rval
));
1262 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
1270 * qla2x00_get_port_name
1271 * Issue get port name mailbox command.
1272 * Returned name is in big endian format.
1275 * ha = adapter block pointer.
1276 * loop_id = loop ID of device.
1277 * name = pointer for name.
1278 * TARGET_QUEUE_LOCK must be released.
1279 * ADAPTER_STATE_LOCK must be released.
1282 * qla2x00 local function return status code.
1288 qla2x00_get_port_name(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t *name
,
1293 mbx_cmd_t
*mcp
= &mc
;
1295 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
1298 mcp
->mb
[0] = MBC_GET_PORT_NAME
;
1299 mcp
->mb
[9] = vha
->vp_idx
;
1300 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
1301 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1302 mcp
->mb
[1] = loop_id
;
1304 mcp
->out_mb
|= MBX_10
;
1306 mcp
->mb
[1] = loop_id
<< 8 | opt
;
1309 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1310 mcp
->tov
= MBX_TOV_SECONDS
;
1312 rval
= qla2x00_mailbox_command(vha
, mcp
);
1314 if (rval
!= QLA_SUCCESS
) {
1316 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
1317 vha
->host_no
, rval
));
1320 /* This function returns name in big endian. */
1321 name
[0] = MSB(mcp
->mb
[2]);
1322 name
[1] = LSB(mcp
->mb
[2]);
1323 name
[2] = MSB(mcp
->mb
[3]);
1324 name
[3] = LSB(mcp
->mb
[3]);
1325 name
[4] = MSB(mcp
->mb
[6]);
1326 name
[5] = LSB(mcp
->mb
[6]);
1327 name
[6] = MSB(mcp
->mb
[7]);
1328 name
[7] = LSB(mcp
->mb
[7]);
1331 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
1340 * Issue LIP reset mailbox command.
1343 * ha = adapter block pointer.
1344 * TARGET_QUEUE_LOCK must be released.
1345 * ADAPTER_STATE_LOCK must be released.
1348 * qla2x00 local function return status code.
1354 qla2x00_lip_reset(scsi_qla_host_t
*vha
)
1358 mbx_cmd_t
*mcp
= &mc
;
1360 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1362 if (IS_QLA81XX(vha
->hw
)) {
1363 /* Logout across all FCFs. */
1364 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1367 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1368 } else if (IS_FWI2_CAPABLE(vha
->hw
)) {
1369 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1372 mcp
->mb
[3] = vha
->hw
->loop_reset_delay
;
1373 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1375 mcp
->mb
[0] = MBC_LIP_RESET
;
1376 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1377 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1378 mcp
->mb
[1] = 0x00ff;
1380 mcp
->out_mb
|= MBX_10
;
1382 mcp
->mb
[1] = 0xff00;
1384 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
1388 mcp
->tov
= MBX_TOV_SECONDS
;
1390 rval
= qla2x00_mailbox_command(vha
, mcp
);
1392 if (rval
!= QLA_SUCCESS
) {
1394 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
1395 __func__
, vha
->host_no
, rval
));
1398 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1409 * ha = adapter block pointer.
1410 * sns = pointer for command.
1411 * cmd_size = command size.
1412 * buf_size = response/command size.
1413 * TARGET_QUEUE_LOCK must be released.
1414 * ADAPTER_STATE_LOCK must be released.
1417 * qla2x00 local function return status code.
1423 qla2x00_send_sns(scsi_qla_host_t
*vha
, dma_addr_t sns_phys_address
,
1424 uint16_t cmd_size
, size_t buf_size
)
1428 mbx_cmd_t
*mcp
= &mc
;
1430 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
1433 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
1434 "tov=%d.\n", vha
->hw
->retry_count
, vha
->hw
->login_timeout
,
1437 mcp
->mb
[0] = MBC_SEND_SNS_COMMAND
;
1438 mcp
->mb
[1] = cmd_size
;
1439 mcp
->mb
[2] = MSW(sns_phys_address
);
1440 mcp
->mb
[3] = LSW(sns_phys_address
);
1441 mcp
->mb
[6] = MSW(MSD(sns_phys_address
));
1442 mcp
->mb
[7] = LSW(MSD(sns_phys_address
));
1443 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1444 mcp
->in_mb
= MBX_0
|MBX_1
;
1445 mcp
->buf_size
= buf_size
;
1446 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
;
1447 mcp
->tov
= (vha
->hw
->login_timeout
* 2) + (vha
->hw
->login_timeout
/ 2);
1448 rval
= qla2x00_mailbox_command(vha
, mcp
);
1450 if (rval
!= QLA_SUCCESS
) {
1452 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1453 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1454 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1455 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1458 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", vha
->host_no
));
1465 qla24xx_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1466 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1470 struct logio_entry_24xx
*lg
;
1473 struct qla_hw_data
*ha
= vha
->hw
;
1475 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1477 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1479 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
1480 __func__
, vha
->host_no
));
1481 return QLA_MEMORY_ALLOC_FAILED
;
1483 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1485 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1486 lg
->entry_count
= 1;
1487 lg
->nport_handle
= cpu_to_le16(loop_id
);
1488 lg
->control_flags
= __constant_cpu_to_le16(LCF_COMMAND_PLOGI
);
1490 lg
->control_flags
|= __constant_cpu_to_le16(LCF_COND_PLOGI
);
1492 lg
->control_flags
|= __constant_cpu_to_le16(LCF_SKIP_PRLI
);
1493 lg
->port_id
[0] = al_pa
;
1494 lg
->port_id
[1] = area
;
1495 lg
->port_id
[2] = domain
;
1496 lg
->vp_index
= vha
->vp_idx
;
1497 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1498 if (rval
!= QLA_SUCCESS
) {
1499 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
1500 "(%x).\n", __func__
, vha
->host_no
, rval
));
1501 } else if (lg
->entry_status
!= 0) {
1502 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1503 "-- error status (%x).\n", __func__
, vha
->host_no
,
1505 rval
= QLA_FUNCTION_FAILED
;
1506 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1507 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1508 iop
[1] = le32_to_cpu(lg
->io_parameter
[1]);
1510 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1511 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1512 vha
->host_no
, le16_to_cpu(lg
->comp_status
), iop
[0],
1516 case LSC_SCODE_PORTID_USED
:
1517 mb
[0] = MBS_PORT_ID_USED
;
1518 mb
[1] = LSW(iop
[1]);
1520 case LSC_SCODE_NPORT_USED
:
1521 mb
[0] = MBS_LOOP_ID_USED
;
1523 case LSC_SCODE_NOLINK
:
1524 case LSC_SCODE_NOIOCB
:
1525 case LSC_SCODE_NOXCB
:
1526 case LSC_SCODE_CMD_FAILED
:
1527 case LSC_SCODE_NOFABRIC
:
1528 case LSC_SCODE_FW_NOT_READY
:
1529 case LSC_SCODE_NOT_LOGGED_IN
:
1530 case LSC_SCODE_NOPCB
:
1531 case LSC_SCODE_ELS_REJECT
:
1532 case LSC_SCODE_CMD_PARAM_ERR
:
1533 case LSC_SCODE_NONPORT
:
1534 case LSC_SCODE_LOGGED_IN
:
1535 case LSC_SCODE_NOFLOGI_ACC
:
1537 mb
[0] = MBS_COMMAND_ERROR
;
1541 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1543 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1545 mb
[0] = MBS_COMMAND_COMPLETE
;
1547 if (iop
[0] & BIT_4
) {
1553 /* Passback COS information. */
1555 if (lg
->io_parameter
[7] || lg
->io_parameter
[8])
1556 mb
[10] |= BIT_0
; /* Class 2. */
1557 if (lg
->io_parameter
[9] || lg
->io_parameter
[10])
1558 mb
[10] |= BIT_1
; /* Class 3. */
1561 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1567 * qla2x00_login_fabric
1568 * Issue login fabric port mailbox command.
1571 * ha = adapter block pointer.
1572 * loop_id = device loop ID.
1573 * domain = device domain.
1574 * area = device area.
1575 * al_pa = device AL_PA.
1576 * status = pointer for return status.
1577 * opt = command options.
1578 * TARGET_QUEUE_LOCK must be released.
1579 * ADAPTER_STATE_LOCK must be released.
1582 * qla2x00 local function return status code.
1588 qla2x00_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1589 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1593 mbx_cmd_t
*mcp
= &mc
;
1594 struct qla_hw_data
*ha
= vha
->hw
;
1596 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", vha
->host_no
));
1598 mcp
->mb
[0] = MBC_LOGIN_FABRIC_PORT
;
1599 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1600 if (HAS_EXTENDED_IDS(ha
)) {
1601 mcp
->mb
[1] = loop_id
;
1603 mcp
->out_mb
|= MBX_10
;
1605 mcp
->mb
[1] = (loop_id
<< 8) | opt
;
1607 mcp
->mb
[2] = domain
;
1608 mcp
->mb
[3] = area
<< 8 | al_pa
;
1610 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_2
|MBX_1
|MBX_0
;
1611 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1613 rval
= qla2x00_mailbox_command(vha
, mcp
);
1615 /* Return mailbox statuses. */
1622 /* COS retrieved from Get-Port-Database mailbox command. */
1626 if (rval
!= QLA_SUCCESS
) {
1627 /* RLU tmp code: need to change main mailbox_command function to
1628 * return ok even when the mailbox completion value is not
1629 * SUCCESS. The caller needs to be responsible to interpret
1630 * the return values of this mailbox command if we're not
1631 * to change too much of the existing code.
1633 if (mcp
->mb
[0] == 0x4001 || mcp
->mb
[0] == 0x4002 ||
1634 mcp
->mb
[0] == 0x4003 || mcp
->mb
[0] == 0x4005 ||
1635 mcp
->mb
[0] == 0x4006)
1639 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
1640 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", vha
->host_no
, rval
,
1641 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
1644 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
1652 * qla2x00_login_local_device
1653 * Issue login loop port mailbox command.
1656 * ha = adapter block pointer.
1657 * loop_id = device loop ID.
1658 * opt = command options.
1661 * Return status code.
1668 qla2x00_login_local_device(scsi_qla_host_t
*vha
, fc_port_t
*fcport
,
1669 uint16_t *mb_ret
, uint8_t opt
)
1673 mbx_cmd_t
*mcp
= &mc
;
1674 struct qla_hw_data
*ha
= vha
->hw
;
1676 if (IS_FWI2_CAPABLE(ha
))
1677 return qla24xx_login_fabric(vha
, fcport
->loop_id
,
1678 fcport
->d_id
.b
.domain
, fcport
->d_id
.b
.area
,
1679 fcport
->d_id
.b
.al_pa
, mb_ret
, opt
);
1681 DEBUG3(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1683 mcp
->mb
[0] = MBC_LOGIN_LOOP_PORT
;
1684 if (HAS_EXTENDED_IDS(ha
))
1685 mcp
->mb
[1] = fcport
->loop_id
;
1687 mcp
->mb
[1] = fcport
->loop_id
<< 8;
1689 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1690 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_1
|MBX_0
;
1691 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1693 rval
= qla2x00_mailbox_command(vha
, mcp
);
1695 /* Return mailbox statuses. */
1696 if (mb_ret
!= NULL
) {
1697 mb_ret
[0] = mcp
->mb
[0];
1698 mb_ret
[1] = mcp
->mb
[1];
1699 mb_ret
[6] = mcp
->mb
[6];
1700 mb_ret
[7] = mcp
->mb
[7];
1703 if (rval
!= QLA_SUCCESS
) {
1704 /* AV tmp code: need to change main mailbox_command function to
1705 * return ok even when the mailbox completion value is not
1706 * SUCCESS. The caller needs to be responsible to interpret
1707 * the return values of this mailbox command if we're not
1708 * to change too much of the existing code.
1710 if (mcp
->mb
[0] == 0x4005 || mcp
->mb
[0] == 0x4006)
1713 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1714 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1715 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1716 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1717 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1718 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1721 DEBUG3(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1728 qla24xx_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1729 uint8_t area
, uint8_t al_pa
)
1732 struct logio_entry_24xx
*lg
;
1734 struct qla_hw_data
*ha
= vha
->hw
;
1736 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1738 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1740 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
1741 __func__
, vha
->host_no
));
1742 return QLA_MEMORY_ALLOC_FAILED
;
1744 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1746 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1747 lg
->entry_count
= 1;
1748 lg
->nport_handle
= cpu_to_le16(loop_id
);
1750 __constant_cpu_to_le16(LCF_COMMAND_LOGO
|LCF_IMPL_LOGO
);
1751 lg
->port_id
[0] = al_pa
;
1752 lg
->port_id
[1] = area
;
1753 lg
->port_id
[2] = domain
;
1754 lg
->vp_index
= vha
->vp_idx
;
1756 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1757 if (rval
!= QLA_SUCCESS
) {
1758 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
1759 "(%x).\n", __func__
, vha
->host_no
, rval
));
1760 } else if (lg
->entry_status
!= 0) {
1761 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1762 "-- error status (%x).\n", __func__
, vha
->host_no
,
1764 rval
= QLA_FUNCTION_FAILED
;
1765 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1766 DEBUG2_3_11(printk("%s(%ld %d): failed to complete IOCB "
1767 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1768 vha
->host_no
, vha
->vp_idx
, le16_to_cpu(lg
->comp_status
),
1769 le32_to_cpu(lg
->io_parameter
[0]),
1770 le32_to_cpu(lg
->io_parameter
[1])));
1773 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1776 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1782 * qla2x00_fabric_logout
1783 * Issue logout fabric port mailbox command.
1786 * ha = adapter block pointer.
1787 * loop_id = device loop ID.
1788 * TARGET_QUEUE_LOCK must be released.
1789 * ADAPTER_STATE_LOCK must be released.
1792 * qla2x00 local function return status code.
1798 qla2x00_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1799 uint8_t area
, uint8_t al_pa
)
1803 mbx_cmd_t
*mcp
= &mc
;
1805 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
1808 mcp
->mb
[0] = MBC_LOGOUT_FABRIC_PORT
;
1809 mcp
->out_mb
= MBX_1
|MBX_0
;
1810 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1811 mcp
->mb
[1] = loop_id
;
1813 mcp
->out_mb
|= MBX_10
;
1815 mcp
->mb
[1] = loop_id
<< 8;
1818 mcp
->in_mb
= MBX_1
|MBX_0
;
1819 mcp
->tov
= MBX_TOV_SECONDS
;
1821 rval
= qla2x00_mailbox_command(vha
, mcp
);
1823 if (rval
!= QLA_SUCCESS
) {
1825 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
1826 "mbx1=%x.\n", vha
->host_no
, rval
, mcp
->mb
[1]));
1829 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
1837 * qla2x00_full_login_lip
1838 * Issue full login LIP mailbox command.
1841 * ha = adapter block pointer.
1842 * TARGET_QUEUE_LOCK must be released.
1843 * ADAPTER_STATE_LOCK must be released.
1846 * qla2x00 local function return status code.
1852 qla2x00_full_login_lip(scsi_qla_host_t
*vha
)
1856 mbx_cmd_t
*mcp
= &mc
;
1858 if (IS_QLA81XX(vha
->hw
))
1861 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
1864 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1865 mcp
->mb
[1] = IS_FWI2_CAPABLE(vha
->hw
) ? BIT_3
: 0;
1868 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1870 mcp
->tov
= MBX_TOV_SECONDS
;
1872 rval
= qla2x00_mailbox_command(vha
, mcp
);
1874 if (rval
!= QLA_SUCCESS
) {
1876 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
1877 vha
->host_no
, rval
));
1880 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
1888 * qla2x00_get_id_list
1891 * ha = adapter block pointer.
1894 * qla2x00 local function return status code.
1900 qla2x00_get_id_list(scsi_qla_host_t
*vha
, void *id_list
, dma_addr_t id_list_dma
,
1905 mbx_cmd_t
*mcp
= &mc
;
1907 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
1910 if (id_list
== NULL
)
1911 return QLA_FUNCTION_FAILED
;
1913 mcp
->mb
[0] = MBC_GET_ID_LIST
;
1914 mcp
->out_mb
= MBX_0
;
1915 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1916 mcp
->mb
[2] = MSW(id_list_dma
);
1917 mcp
->mb
[3] = LSW(id_list_dma
);
1918 mcp
->mb
[6] = MSW(MSD(id_list_dma
));
1919 mcp
->mb
[7] = LSW(MSD(id_list_dma
));
1921 mcp
->mb
[9] = vha
->vp_idx
;
1922 mcp
->out_mb
|= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
;
1924 mcp
->mb
[1] = MSW(id_list_dma
);
1925 mcp
->mb
[2] = LSW(id_list_dma
);
1926 mcp
->mb
[3] = MSW(MSD(id_list_dma
));
1927 mcp
->mb
[6] = LSW(MSD(id_list_dma
));
1928 mcp
->out_mb
|= MBX_6
|MBX_3
|MBX_2
|MBX_1
;
1930 mcp
->in_mb
= MBX_1
|MBX_0
;
1931 mcp
->tov
= MBX_TOV_SECONDS
;
1933 rval
= qla2x00_mailbox_command(vha
, mcp
);
1935 if (rval
!= QLA_SUCCESS
) {
1937 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
1938 vha
->host_no
, rval
));
1940 *entries
= mcp
->mb
[1];
1941 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
1949 * qla2x00_get_resource_cnts
1950 * Get current firmware resource counts.
1953 * ha = adapter block pointer.
1956 * qla2x00 local function return status code.
1962 qla2x00_get_resource_cnts(scsi_qla_host_t
*vha
, uint16_t *cur_xchg_cnt
,
1963 uint16_t *orig_xchg_cnt
, uint16_t *cur_iocb_cnt
,
1964 uint16_t *orig_iocb_cnt
, uint16_t *max_npiv_vports
)
1968 mbx_cmd_t
*mcp
= &mc
;
1970 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1972 mcp
->mb
[0] = MBC_GET_RESOURCE_COUNTS
;
1973 mcp
->out_mb
= MBX_0
;
1974 mcp
->in_mb
= MBX_11
|MBX_10
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1975 mcp
->tov
= MBX_TOV_SECONDS
;
1977 rval
= qla2x00_mailbox_command(vha
, mcp
);
1979 if (rval
!= QLA_SUCCESS
) {
1981 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__
,
1982 vha
->host_no
, mcp
->mb
[0]));
1984 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
1985 "mb7=%x mb10=%x mb11=%x.\n", __func__
, vha
->host_no
,
1986 mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3], mcp
->mb
[6], mcp
->mb
[7],
1987 mcp
->mb
[10], mcp
->mb
[11]));
1990 *cur_xchg_cnt
= mcp
->mb
[3];
1992 *orig_xchg_cnt
= mcp
->mb
[6];
1994 *cur_iocb_cnt
= mcp
->mb
[7];
1996 *orig_iocb_cnt
= mcp
->mb
[10];
1997 if (vha
->hw
->flags
.npiv_supported
&& max_npiv_vports
)
1998 *max_npiv_vports
= mcp
->mb
[11];
2004 #if defined(QL_DEBUG_LEVEL_3)
2006 * qla2x00_get_fcal_position_map
2007 * Get FCAL (LILP) position map using mailbox command
2010 * ha = adapter state pointer.
2011 * pos_map = buffer pointer (can be NULL).
2014 * qla2x00 local function return status code.
2020 qla2x00_get_fcal_position_map(scsi_qla_host_t
*vha
, char *pos_map
)
2024 mbx_cmd_t
*mcp
= &mc
;
2026 dma_addr_t pmap_dma
;
2027 struct qla_hw_data
*ha
= vha
->hw
;
2029 pmap
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pmap_dma
);
2031 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
2032 __func__
, vha
->host_no
));
2033 return QLA_MEMORY_ALLOC_FAILED
;
2035 memset(pmap
, 0, FCAL_MAP_SIZE
);
2037 mcp
->mb
[0] = MBC_GET_FC_AL_POSITION_MAP
;
2038 mcp
->mb
[2] = MSW(pmap_dma
);
2039 mcp
->mb
[3] = LSW(pmap_dma
);
2040 mcp
->mb
[6] = MSW(MSD(pmap_dma
));
2041 mcp
->mb
[7] = LSW(MSD(pmap_dma
));
2042 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2043 mcp
->in_mb
= MBX_1
|MBX_0
;
2044 mcp
->buf_size
= FCAL_MAP_SIZE
;
2045 mcp
->flags
= MBX_DMA_IN
;
2046 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
2047 rval
= qla2x00_mailbox_command(vha
, mcp
);
2049 if (rval
== QLA_SUCCESS
) {
2050 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
2051 "size (%x)\n", __func__
, vha
->host_no
, mcp
->mb
[0],
2052 mcp
->mb
[1], (unsigned)pmap
[0]));
2053 DEBUG11(qla2x00_dump_buffer(pmap
, pmap
[0] + 1));
2056 memcpy(pos_map
, pmap
, FCAL_MAP_SIZE
);
2058 dma_pool_free(ha
->s_dma_pool
, pmap
, pmap_dma
);
2060 if (rval
!= QLA_SUCCESS
) {
2061 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2062 vha
->host_no
, rval
));
2064 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2072 * qla2x00_get_link_status
2075 * ha = adapter block pointer.
2076 * loop_id = device loop ID.
2077 * ret_buf = pointer to link status return buffer.
2081 * BIT_0 = mem alloc error.
2082 * BIT_1 = mailbox error.
2085 qla2x00_get_link_status(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2086 struct link_statistics
*stats
, dma_addr_t stats_dma
)
2090 mbx_cmd_t
*mcp
= &mc
;
2091 uint32_t *siter
, *diter
, dwords
;
2092 struct qla_hw_data
*ha
= vha
->hw
;
2094 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2096 mcp
->mb
[0] = MBC_GET_LINK_STATUS
;
2097 mcp
->mb
[2] = MSW(stats_dma
);
2098 mcp
->mb
[3] = LSW(stats_dma
);
2099 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2100 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2101 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2103 if (IS_FWI2_CAPABLE(ha
)) {
2104 mcp
->mb
[1] = loop_id
;
2107 mcp
->out_mb
|= MBX_10
|MBX_4
|MBX_1
;
2108 mcp
->in_mb
|= MBX_1
;
2109 } else if (HAS_EXTENDED_IDS(ha
)) {
2110 mcp
->mb
[1] = loop_id
;
2112 mcp
->out_mb
|= MBX_10
|MBX_1
;
2114 mcp
->mb
[1] = loop_id
<< 8;
2115 mcp
->out_mb
|= MBX_1
;
2117 mcp
->tov
= MBX_TOV_SECONDS
;
2118 mcp
->flags
= IOCTL_CMD
;
2119 rval
= qla2x00_mailbox_command(vha
, mcp
);
2121 if (rval
== QLA_SUCCESS
) {
2122 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2123 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2124 __func__
, vha
->host_no
, mcp
->mb
[0]));
2125 rval
= QLA_FUNCTION_FAILED
;
2127 /* Copy over data -- firmware data is LE. */
2128 dwords
= offsetof(struct link_statistics
, unused1
) / 4;
2129 siter
= diter
= &stats
->link_fail_cnt
;
2131 *diter
++ = le32_to_cpu(*siter
++);
2135 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2136 vha
->host_no
, rval
));
2143 qla24xx_get_isp_stats(scsi_qla_host_t
*vha
, struct link_statistics
*stats
,
2144 dma_addr_t stats_dma
)
2148 mbx_cmd_t
*mcp
= &mc
;
2149 uint32_t *siter
, *diter
, dwords
;
2151 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2153 mcp
->mb
[0] = MBC_GET_LINK_PRIV_STATS
;
2154 mcp
->mb
[2] = MSW(stats_dma
);
2155 mcp
->mb
[3] = LSW(stats_dma
);
2156 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2157 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2158 mcp
->mb
[8] = sizeof(struct link_statistics
) / 4;
2159 mcp
->mb
[9] = vha
->vp_idx
;
2161 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2162 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
2163 mcp
->tov
= MBX_TOV_SECONDS
;
2164 mcp
->flags
= IOCTL_CMD
;
2165 rval
= qla2x00_mailbox_command(vha
, mcp
);
2167 if (rval
== QLA_SUCCESS
) {
2168 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2169 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2170 __func__
, vha
->host_no
, mcp
->mb
[0]));
2171 rval
= QLA_FUNCTION_FAILED
;
2173 /* Copy over data -- firmware data is LE. */
2174 dwords
= sizeof(struct link_statistics
) / 4;
2175 siter
= diter
= &stats
->link_fail_cnt
;
2177 *diter
++ = le32_to_cpu(*siter
++);
2181 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2182 vha
->host_no
, rval
));
2189 qla24xx_abort_command(scsi_qla_host_t
*vha
, srb_t
*sp
, struct req_que
*req
)
2193 unsigned long flags
= 0;
2195 struct abort_entry_24xx
*abt
;
2198 struct qla_hw_data
*ha
= vha
->hw
;
2200 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2202 fcport
= sp
->fcport
;
2204 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
2205 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
2206 if (req
->outstanding_cmds
[handle
] == sp
)
2209 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
2210 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
2211 /* Command not found. */
2212 return QLA_FUNCTION_FAILED
;
2215 abt
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &abt_dma
);
2217 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
2218 __func__
, vha
->host_no
));
2219 return QLA_MEMORY_ALLOC_FAILED
;
2221 memset(abt
, 0, sizeof(struct abort_entry_24xx
));
2223 abt
->entry_type
= ABORT_IOCB_TYPE
;
2224 abt
->entry_count
= 1;
2225 abt
->nport_handle
= cpu_to_le16(fcport
->loop_id
);
2226 abt
->handle_to_abort
= handle
;
2227 abt
->port_id
[0] = fcport
->d_id
.b
.al_pa
;
2228 abt
->port_id
[1] = fcport
->d_id
.b
.area
;
2229 abt
->port_id
[2] = fcport
->d_id
.b
.domain
;
2230 abt
->vp_index
= fcport
->vp_idx
;
2232 abt
->req_que_no
= cpu_to_le16(req
->id
);
2234 rval
= qla2x00_issue_iocb(vha
, abt
, abt_dma
, 0);
2235 if (rval
!= QLA_SUCCESS
) {
2236 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
2237 __func__
, vha
->host_no
, rval
));
2238 } else if (abt
->entry_status
!= 0) {
2239 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2240 "-- error status (%x).\n", __func__
, vha
->host_no
,
2241 abt
->entry_status
));
2242 rval
= QLA_FUNCTION_FAILED
;
2243 } else if (abt
->nport_handle
!= __constant_cpu_to_le16(0)) {
2244 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2245 "-- completion status (%x).\n", __func__
, vha
->host_no
,
2246 le16_to_cpu(abt
->nport_handle
)));
2247 rval
= QLA_FUNCTION_FAILED
;
2249 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2252 dma_pool_free(ha
->s_dma_pool
, abt
, abt_dma
);
2257 struct tsk_mgmt_cmd
{
2259 struct tsk_mgmt_entry tsk
;
2260 struct sts_entry_24xx sts
;
2265 __qla24xx_issue_tmf(char *name
, uint32_t type
, struct fc_port
*fcport
,
2269 struct tsk_mgmt_cmd
*tsk
;
2271 scsi_qla_host_t
*vha
;
2272 struct qla_hw_data
*ha
;
2273 struct req_que
*req
;
2274 struct rsp_que
*rsp
;
2276 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
2280 req
= ha
->req_q_map
[0];
2281 rsp
= ha
->rsp_q_map
[0];
2282 tsk
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &tsk_dma
);
2284 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
2285 "IOCB.\n", __func__
, vha
->host_no
));
2286 return QLA_MEMORY_ALLOC_FAILED
;
2288 memset(tsk
, 0, sizeof(struct tsk_mgmt_cmd
));
2290 tsk
->p
.tsk
.entry_type
= TSK_MGMT_IOCB_TYPE
;
2291 tsk
->p
.tsk
.entry_count
= 1;
2292 tsk
->p
.tsk
.nport_handle
= cpu_to_le16(fcport
->loop_id
);
2293 tsk
->p
.tsk
.timeout
= cpu_to_le16(ha
->r_a_tov
/ 10 * 2);
2294 tsk
->p
.tsk
.control_flags
= cpu_to_le32(type
);
2295 tsk
->p
.tsk
.port_id
[0] = fcport
->d_id
.b
.al_pa
;
2296 tsk
->p
.tsk
.port_id
[1] = fcport
->d_id
.b
.area
;
2297 tsk
->p
.tsk
.port_id
[2] = fcport
->d_id
.b
.domain
;
2298 tsk
->p
.tsk
.vp_index
= fcport
->vp_idx
;
2299 if (type
== TCF_LUN_RESET
) {
2300 int_to_scsilun(l
, &tsk
->p
.tsk
.lun
);
2301 host_to_fcp_swap((uint8_t *)&tsk
->p
.tsk
.lun
,
2302 sizeof(tsk
->p
.tsk
.lun
));
2305 rval
= qla2x00_issue_iocb(vha
, tsk
, tsk_dma
, 0);
2306 if (rval
!= QLA_SUCCESS
) {
2307 DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB "
2308 "(%x).\n", __func__
, vha
->host_no
, name
, rval
));
2309 } else if (tsk
->p
.sts
.entry_status
!= 0) {
2310 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2311 "-- error status (%x).\n", __func__
, vha
->host_no
,
2312 tsk
->p
.sts
.entry_status
));
2313 rval
= QLA_FUNCTION_FAILED
;
2314 } else if (tsk
->p
.sts
.comp_status
!=
2315 __constant_cpu_to_le16(CS_COMPLETE
)) {
2316 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2317 "-- completion status (%x).\n", __func__
,
2318 vha
->host_no
, le16_to_cpu(tsk
->p
.sts
.comp_status
)));
2319 rval
= QLA_FUNCTION_FAILED
;
2322 /* Issue marker IOCB. */
2323 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
2324 type
== TCF_LUN_RESET
? MK_SYNC_ID_LUN
: MK_SYNC_ID
);
2325 if (rval2
!= QLA_SUCCESS
) {
2326 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
2327 "(%x).\n", __func__
, vha
->host_no
, rval2
));
2329 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2332 dma_pool_free(ha
->s_dma_pool
, tsk
, tsk_dma
);
2338 qla24xx_abort_target(struct fc_port
*fcport
, unsigned int l
)
2340 return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET
, fcport
, l
);
2344 qla24xx_lun_reset(struct fc_port
*fcport
, unsigned int l
)
2346 return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET
, fcport
, l
);
2350 qla2x00_system_error(scsi_qla_host_t
*vha
)
2354 mbx_cmd_t
*mcp
= &mc
;
2355 struct qla_hw_data
*ha
= vha
->hw
;
2357 if (!IS_QLA23XX(ha
) && !IS_FWI2_CAPABLE(ha
))
2358 return QLA_FUNCTION_FAILED
;
2360 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2362 mcp
->mb
[0] = MBC_GEN_SYSTEM_ERROR
;
2363 mcp
->out_mb
= MBX_0
;
2367 rval
= qla2x00_mailbox_command(vha
, mcp
);
2369 if (rval
!= QLA_SUCCESS
) {
2370 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2371 vha
->host_no
, rval
));
2373 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2380 * qla2x00_set_serdes_params() -
2386 qla2x00_set_serdes_params(scsi_qla_host_t
*vha
, uint16_t sw_em_1g
,
2387 uint16_t sw_em_2g
, uint16_t sw_em_4g
)
2391 mbx_cmd_t
*mcp
= &mc
;
2393 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2395 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2397 mcp
->mb
[2] = sw_em_1g
| BIT_15
;
2398 mcp
->mb
[3] = sw_em_2g
| BIT_15
;
2399 mcp
->mb
[4] = sw_em_4g
| BIT_15
;
2400 mcp
->out_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2402 mcp
->tov
= MBX_TOV_SECONDS
;
2404 rval
= qla2x00_mailbox_command(vha
, mcp
);
2406 if (rval
!= QLA_SUCCESS
) {
2408 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2409 vha
->host_no
, rval
, mcp
->mb
[0]));
2412 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2419 qla2x00_stop_firmware(scsi_qla_host_t
*vha
)
2423 mbx_cmd_t
*mcp
= &mc
;
2425 if (!IS_FWI2_CAPABLE(vha
->hw
))
2426 return QLA_FUNCTION_FAILED
;
2428 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2430 mcp
->mb
[0] = MBC_STOP_FIRMWARE
;
2431 mcp
->out_mb
= MBX_0
;
2435 rval
= qla2x00_mailbox_command(vha
, mcp
);
2437 if (rval
!= QLA_SUCCESS
) {
2438 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2439 vha
->host_no
, rval
));
2441 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2448 qla2x00_enable_eft_trace(scsi_qla_host_t
*vha
, dma_addr_t eft_dma
,
2453 mbx_cmd_t
*mcp
= &mc
;
2455 if (!IS_FWI2_CAPABLE(vha
->hw
))
2456 return QLA_FUNCTION_FAILED
;
2458 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2460 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2461 mcp
->mb
[1] = TC_EFT_ENABLE
;
2462 mcp
->mb
[2] = LSW(eft_dma
);
2463 mcp
->mb
[3] = MSW(eft_dma
);
2464 mcp
->mb
[4] = LSW(MSD(eft_dma
));
2465 mcp
->mb
[5] = MSW(MSD(eft_dma
));
2466 mcp
->mb
[6] = buffers
;
2467 mcp
->mb
[7] = TC_AEN_DISABLE
;
2468 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2469 mcp
->in_mb
= MBX_1
|MBX_0
;
2470 mcp
->tov
= MBX_TOV_SECONDS
;
2472 rval
= qla2x00_mailbox_command(vha
, mcp
);
2473 if (rval
!= QLA_SUCCESS
) {
2474 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2475 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2477 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2484 qla2x00_disable_eft_trace(scsi_qla_host_t
*vha
)
2488 mbx_cmd_t
*mcp
= &mc
;
2490 if (!IS_FWI2_CAPABLE(vha
->hw
))
2491 return QLA_FUNCTION_FAILED
;
2493 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2495 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2496 mcp
->mb
[1] = TC_EFT_DISABLE
;
2497 mcp
->out_mb
= MBX_1
|MBX_0
;
2498 mcp
->in_mb
= MBX_1
|MBX_0
;
2499 mcp
->tov
= MBX_TOV_SECONDS
;
2501 rval
= qla2x00_mailbox_command(vha
, mcp
);
2502 if (rval
!= QLA_SUCCESS
) {
2503 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2504 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2506 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2513 qla2x00_enable_fce_trace(scsi_qla_host_t
*vha
, dma_addr_t fce_dma
,
2514 uint16_t buffers
, uint16_t *mb
, uint32_t *dwords
)
2518 mbx_cmd_t
*mcp
= &mc
;
2520 if (!IS_QLA25XX(vha
->hw
) && !IS_QLA81XX(vha
->hw
))
2521 return QLA_FUNCTION_FAILED
;
2523 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2525 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2526 mcp
->mb
[1] = TC_FCE_ENABLE
;
2527 mcp
->mb
[2] = LSW(fce_dma
);
2528 mcp
->mb
[3] = MSW(fce_dma
);
2529 mcp
->mb
[4] = LSW(MSD(fce_dma
));
2530 mcp
->mb
[5] = MSW(MSD(fce_dma
));
2531 mcp
->mb
[6] = buffers
;
2532 mcp
->mb
[7] = TC_AEN_DISABLE
;
2534 mcp
->mb
[9] = TC_FCE_DEFAULT_RX_SIZE
;
2535 mcp
->mb
[10] = TC_FCE_DEFAULT_TX_SIZE
;
2536 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2538 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2539 mcp
->tov
= MBX_TOV_SECONDS
;
2541 rval
= qla2x00_mailbox_command(vha
, mcp
);
2542 if (rval
!= QLA_SUCCESS
) {
2543 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2544 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2546 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2549 memcpy(mb
, mcp
->mb
, 8 * sizeof(*mb
));
2558 qla2x00_disable_fce_trace(scsi_qla_host_t
*vha
, uint64_t *wr
, uint64_t *rd
)
2562 mbx_cmd_t
*mcp
= &mc
;
2564 if (!IS_FWI2_CAPABLE(vha
->hw
))
2565 return QLA_FUNCTION_FAILED
;
2567 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2569 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2570 mcp
->mb
[1] = TC_FCE_DISABLE
;
2571 mcp
->mb
[2] = TC_FCE_DISABLE_TRACE
;
2572 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
2573 mcp
->in_mb
= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2575 mcp
->tov
= MBX_TOV_SECONDS
;
2577 rval
= qla2x00_mailbox_command(vha
, mcp
);
2578 if (rval
!= QLA_SUCCESS
) {
2579 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2580 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2582 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2585 *wr
= (uint64_t) mcp
->mb
[5] << 48 |
2586 (uint64_t) mcp
->mb
[4] << 32 |
2587 (uint64_t) mcp
->mb
[3] << 16 |
2588 (uint64_t) mcp
->mb
[2];
2590 *rd
= (uint64_t) mcp
->mb
[9] << 48 |
2591 (uint64_t) mcp
->mb
[8] << 32 |
2592 (uint64_t) mcp
->mb
[7] << 16 |
2593 (uint64_t) mcp
->mb
[6];
2600 qla2x00_read_sfp(scsi_qla_host_t
*vha
, dma_addr_t sfp_dma
, uint16_t addr
,
2601 uint16_t off
, uint16_t count
)
2605 mbx_cmd_t
*mcp
= &mc
;
2607 if (!IS_FWI2_CAPABLE(vha
->hw
))
2608 return QLA_FUNCTION_FAILED
;
2610 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2612 mcp
->mb
[0] = MBC_READ_SFP
;
2614 mcp
->mb
[2] = MSW(sfp_dma
);
2615 mcp
->mb
[3] = LSW(sfp_dma
);
2616 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
2617 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
2621 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2623 mcp
->tov
= MBX_TOV_SECONDS
;
2625 rval
= qla2x00_mailbox_command(vha
, mcp
);
2627 if (rval
!= QLA_SUCCESS
) {
2628 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2629 vha
->host_no
, rval
, mcp
->mb
[0]));
2631 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2638 qla2x00_set_idma_speed(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2639 uint16_t port_speed
, uint16_t *mb
)
2643 mbx_cmd_t
*mcp
= &mc
;
2645 if (!IS_IIDMA_CAPABLE(vha
->hw
))
2646 return QLA_FUNCTION_FAILED
;
2648 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2650 mcp
->mb
[0] = MBC_PORT_PARAMS
;
2651 mcp
->mb
[1] = loop_id
;
2653 mcp
->mb
[3] = port_speed
& (BIT_2
|BIT_1
|BIT_0
);
2654 mcp
->mb
[4] = mcp
->mb
[5] = 0;
2655 mcp
->out_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2656 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_1
|MBX_0
;
2657 mcp
->tov
= MBX_TOV_SECONDS
;
2659 rval
= qla2x00_mailbox_command(vha
, mcp
);
2661 /* Return mailbox statuses. */
2670 if (rval
!= QLA_SUCCESS
) {
2671 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2672 vha
->host_no
, rval
));
2674 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2681 qla24xx_report_id_acquisition(scsi_qla_host_t
*vha
,
2682 struct vp_rpt_id_entry_24xx
*rptid_entry
)
2685 uint16_t stat
= le16_to_cpu(rptid_entry
->vp_idx
);
2686 struct qla_hw_data
*ha
= vha
->hw
;
2687 scsi_qla_host_t
*vp
;
2689 if (rptid_entry
->entry_status
!= 0)
2692 if (rptid_entry
->format
== 0) {
2693 DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d,"
2694 " number of VPs acquired %d\n", __func__
, vha
->host_no
,
2695 MSB(rptid_entry
->vp_count
), LSB(rptid_entry
->vp_count
)));
2696 DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__
,
2697 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2698 rptid_entry
->port_id
[0]));
2699 } else if (rptid_entry
->format
== 1) {
2701 DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled "
2703 "with port id %02x%02x%02x\n", __func__
, vha
->host_no
,
2705 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2706 rptid_entry
->port_id
[0]));
2713 list_for_each_entry(vp
, &ha
->vp_list
, list
)
2714 if (vp_idx
== vp
->vp_idx
)
2719 vp
->d_id
.b
.domain
= rptid_entry
->port_id
[2];
2720 vp
->d_id
.b
.area
= rptid_entry
->port_id
[1];
2721 vp
->d_id
.b
.al_pa
= rptid_entry
->port_id
[0];
2724 * Cannot configure here as we are still sitting on the
2725 * response queue. Handle it in dpc context.
2727 set_bit(VP_IDX_ACQUIRED
, &vp
->vp_flags
);
2728 set_bit(VP_DPC_NEEDED
, &vha
->dpc_flags
);
2730 qla2xxx_wake_dpc(vha
);
2735 * qla24xx_modify_vp_config
2736 * Change VP configuration for vha
2739 * vha = adapter block pointer.
2742 * qla2xxx local function return status code.
2748 qla24xx_modify_vp_config(scsi_qla_host_t
*vha
)
2751 struct vp_config_entry_24xx
*vpmod
;
2752 dma_addr_t vpmod_dma
;
2753 struct qla_hw_data
*ha
= vha
->hw
;
2754 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2756 /* This can be called by the parent */
2758 vpmod
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vpmod_dma
);
2760 DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP "
2761 "IOCB.\n", __func__
, vha
->host_no
));
2762 return QLA_MEMORY_ALLOC_FAILED
;
2765 memset(vpmod
, 0, sizeof(struct vp_config_entry_24xx
));
2766 vpmod
->entry_type
= VP_CONFIG_IOCB_TYPE
;
2767 vpmod
->entry_count
= 1;
2768 vpmod
->command
= VCT_COMMAND_MOD_ENABLE_VPS
;
2769 vpmod
->vp_count
= 1;
2770 vpmod
->vp_index1
= vha
->vp_idx
;
2771 vpmod
->options_idx1
= BIT_3
|BIT_4
|BIT_5
;
2772 memcpy(vpmod
->node_name_idx1
, vha
->node_name
, WWN_SIZE
);
2773 memcpy(vpmod
->port_name_idx1
, vha
->port_name
, WWN_SIZE
);
2774 vpmod
->entry_count
= 1;
2776 rval
= qla2x00_issue_iocb(base_vha
, vpmod
, vpmod_dma
, 0);
2777 if (rval
!= QLA_SUCCESS
) {
2778 DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB"
2779 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2780 } else if (vpmod
->comp_status
!= 0) {
2781 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2782 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2783 vpmod
->comp_status
));
2784 rval
= QLA_FUNCTION_FAILED
;
2785 } else if (vpmod
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2786 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2787 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2788 le16_to_cpu(vpmod
->comp_status
)));
2789 rval
= QLA_FUNCTION_FAILED
;
2792 DEBUG11(printk("%s(%ld): done.\n", __func__
,
2793 base_vha
->host_no
));
2794 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_INITIALIZING
);
2796 dma_pool_free(ha
->s_dma_pool
, vpmod
, vpmod_dma
);
2802 * qla24xx_control_vp
2803 * Enable a virtual port for given host
2806 * ha = adapter block pointer.
2807 * vhba = virtual adapter (unused)
2808 * index = index number for enabled VP
2811 * qla2xxx local function return status code.
2817 qla24xx_control_vp(scsi_qla_host_t
*vha
, int cmd
)
2821 struct vp_ctrl_entry_24xx
*vce
;
2823 struct qla_hw_data
*ha
= vha
->hw
;
2824 int vp_index
= vha
->vp_idx
;
2825 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2827 DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__
,
2828 vha
->host_no
, vp_index
));
2830 if (vp_index
== 0 || vp_index
>= ha
->max_npiv_vports
)
2831 return QLA_PARAMETER_ERROR
;
2833 vce
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vce_dma
);
2835 DEBUG2_3(printk("%s(%ld): "
2836 "failed to allocate VP Control IOCB.\n", __func__
,
2837 base_vha
->host_no
));
2838 return QLA_MEMORY_ALLOC_FAILED
;
2840 memset(vce
, 0, sizeof(struct vp_ctrl_entry_24xx
));
2842 vce
->entry_type
= VP_CTRL_IOCB_TYPE
;
2843 vce
->entry_count
= 1;
2844 vce
->command
= cpu_to_le16(cmd
);
2845 vce
->vp_count
= __constant_cpu_to_le16(1);
2847 /* index map in firmware starts with 1; decrement index
2848 * this is ok as we never use index 0
2850 map
= (vp_index
- 1) / 8;
2851 pos
= (vp_index
- 1) & 7;
2852 mutex_lock(&ha
->vport_lock
);
2853 vce
->vp_idx_map
[map
] |= 1 << pos
;
2854 mutex_unlock(&ha
->vport_lock
);
2856 rval
= qla2x00_issue_iocb(base_vha
, vce
, vce_dma
, 0);
2857 if (rval
!= QLA_SUCCESS
) {
2858 DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB"
2859 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2860 printk("%s(%ld): failed to issue VP control IOCB"
2861 "(%x).\n", __func__
, base_vha
->host_no
, rval
);
2862 } else if (vce
->entry_status
!= 0) {
2863 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2864 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2865 vce
->entry_status
));
2866 printk("%s(%ld): failed to complete IOCB "
2867 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2869 rval
= QLA_FUNCTION_FAILED
;
2870 } else if (vce
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2871 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2872 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2873 le16_to_cpu(vce
->comp_status
)));
2874 printk("%s(%ld): failed to complete IOCB "
2875 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2876 le16_to_cpu(vce
->comp_status
));
2877 rval
= QLA_FUNCTION_FAILED
;
2879 DEBUG2(printk("%s(%ld): done.\n", __func__
, base_vha
->host_no
));
2882 dma_pool_free(ha
->s_dma_pool
, vce
, vce_dma
);
2888 * qla2x00_send_change_request
2889 * Receive or disable RSCN request from fabric controller
2892 * ha = adapter block pointer
2893 * format = registration format:
2895 * 1 - Fabric detected registration
2896 * 2 - N_port detected registration
2897 * 3 - Full registration
2898 * FF - clear registration
2899 * vp_idx = Virtual port index
2902 * qla2x00 local function return status code.
2909 qla2x00_send_change_request(scsi_qla_host_t
*vha
, uint16_t format
,
2914 mbx_cmd_t
*mcp
= &mc
;
2917 * This command is implicitly executed by firmware during login for the
2921 return QLA_FUNCTION_FAILED
;
2923 mcp
->mb
[0] = MBC_SEND_CHANGE_REQUEST
;
2924 mcp
->mb
[1] = format
;
2925 mcp
->mb
[9] = vp_idx
;
2926 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
2927 mcp
->in_mb
= MBX_0
|MBX_1
;
2928 mcp
->tov
= MBX_TOV_SECONDS
;
2930 rval
= qla2x00_mailbox_command(vha
, mcp
);
2932 if (rval
== QLA_SUCCESS
) {
2933 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2943 qla2x00_dump_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t addr
,
2948 mbx_cmd_t
*mcp
= &mc
;
2950 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2952 if (MSW(addr
) || IS_FWI2_CAPABLE(vha
->hw
)) {
2953 mcp
->mb
[0] = MBC_DUMP_RISC_RAM_EXTENDED
;
2954 mcp
->mb
[8] = MSW(addr
);
2955 mcp
->out_mb
= MBX_8
|MBX_0
;
2957 mcp
->mb
[0] = MBC_DUMP_RISC_RAM
;
2958 mcp
->out_mb
= MBX_0
;
2960 mcp
->mb
[1] = LSW(addr
);
2961 mcp
->mb
[2] = MSW(req_dma
);
2962 mcp
->mb
[3] = LSW(req_dma
);
2963 mcp
->mb
[6] = MSW(MSD(req_dma
));
2964 mcp
->mb
[7] = LSW(MSD(req_dma
));
2965 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
2966 if (IS_FWI2_CAPABLE(vha
->hw
)) {
2967 mcp
->mb
[4] = MSW(size
);
2968 mcp
->mb
[5] = LSW(size
);
2969 mcp
->out_mb
|= MBX_5
|MBX_4
;
2971 mcp
->mb
[4] = LSW(size
);
2972 mcp
->out_mb
|= MBX_4
;
2976 mcp
->tov
= MBX_TOV_SECONDS
;
2978 rval
= qla2x00_mailbox_command(vha
, mcp
);
2980 if (rval
!= QLA_SUCCESS
) {
2981 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
2982 vha
->host_no
, rval
, mcp
->mb
[0]));
2984 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2990 /* 84XX Support **************************************************************/
2992 struct cs84xx_mgmt_cmd
{
2994 struct verify_chip_entry_84xx req
;
2995 struct verify_chip_rsp_84xx rsp
;
3000 qla84xx_verify_chip(struct scsi_qla_host
*vha
, uint16_t *status
)
3003 struct cs84xx_mgmt_cmd
*mn
;
3006 unsigned long flags
;
3007 struct qla_hw_data
*ha
= vha
->hw
;
3009 DEBUG16(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3011 mn
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &mn_dma
);
3013 DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX "
3014 "IOCB.\n", __func__
, vha
->host_no
));
3015 return QLA_MEMORY_ALLOC_FAILED
;
3019 options
= ha
->cs84xx
->fw_update
? VCO_FORCE_UPDATE
: 0;
3020 /* Diagnostic firmware? */
3021 /* options |= MENLO_DIAG_FW; */
3022 /* We update the firmware with only one data sequence. */
3023 options
|= VCO_END_OF_DATA
;
3027 memset(mn
, 0, sizeof(*mn
));
3028 mn
->p
.req
.entry_type
= VERIFY_CHIP_IOCB_TYPE
;
3029 mn
->p
.req
.entry_count
= 1;
3030 mn
->p
.req
.options
= cpu_to_le16(options
);
3032 DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__
,
3034 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3037 rval
= qla2x00_issue_iocb_timeout(vha
, mn
, mn_dma
, 0, 120);
3038 if (rval
!= QLA_SUCCESS
) {
3039 DEBUG2_16(printk("%s(%ld): failed to issue Verify "
3040 "IOCB (%x).\n", __func__
, vha
->host_no
, rval
));
3044 DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__
,
3046 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3049 status
[0] = le16_to_cpu(mn
->p
.rsp
.comp_status
);
3050 status
[1] = status
[0] == CS_VCS_CHIP_FAILURE
?
3051 le16_to_cpu(mn
->p
.rsp
.failure_code
) : 0;
3052 DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__
,
3053 vha
->host_no
, status
[0], status
[1]));
3055 if (status
[0] != CS_COMPLETE
) {
3056 rval
= QLA_FUNCTION_FAILED
;
3057 if (!(options
& VCO_DONT_UPDATE_FW
)) {
3058 DEBUG2_16(printk("%s(%ld): Firmware update "
3059 "failed. Retrying without update "
3060 "firmware.\n", __func__
, vha
->host_no
));
3061 options
|= VCO_DONT_UPDATE_FW
;
3062 options
&= ~VCO_FORCE_UPDATE
;
3066 DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n",
3067 __func__
, vha
->host_no
,
3068 le32_to_cpu(mn
->p
.rsp
.fw_ver
)));
3070 /* NOTE: we only update OP firmware. */
3071 spin_lock_irqsave(&ha
->cs84xx
->access_lock
, flags
);
3072 ha
->cs84xx
->op_fw_version
=
3073 le32_to_cpu(mn
->p
.rsp
.fw_ver
);
3074 spin_unlock_irqrestore(&ha
->cs84xx
->access_lock
,
3080 dma_pool_free(ha
->s_dma_pool
, mn
, mn_dma
);
3082 if (rval
!= QLA_SUCCESS
) {
3083 DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__
,
3084 vha
->host_no
, rval
));
3086 DEBUG16(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3093 qla25xx_init_req_que(struct scsi_qla_host
*vha
, struct req_que
*req
)
3096 unsigned long flags
;
3098 mbx_cmd_t
*mcp
= &mc
;
3099 struct device_reg_25xxmq __iomem
*reg
;
3100 struct qla_hw_data
*ha
= vha
->hw
;
3102 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3103 mcp
->mb
[1] = req
->options
;
3104 mcp
->mb
[2] = MSW(LSD(req
->dma
));
3105 mcp
->mb
[3] = LSW(LSD(req
->dma
));
3106 mcp
->mb
[6] = MSW(MSD(req
->dma
));
3107 mcp
->mb
[7] = LSW(MSD(req
->dma
));
3108 mcp
->mb
[5] = req
->length
;
3110 mcp
->mb
[10] = req
->rsp
->id
;
3111 mcp
->mb
[12] = req
->qos
;
3112 mcp
->mb
[11] = req
->vp_idx
;
3113 mcp
->mb
[13] = req
->rid
;
3115 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3116 QLA_QUE_PAGE
* req
->id
);
3118 mcp
->mb
[4] = req
->id
;
3119 /* que in ptr index */
3121 /* que out ptr index */
3123 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
|
3124 MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3126 mcp
->flags
= MBX_DMA_OUT
;
3129 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3130 if (!(req
->options
& BIT_0
)) {
3131 WRT_REG_DWORD(®
->req_q_in
, 0);
3132 WRT_REG_DWORD(®
->req_q_out
, 0);
3134 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3136 rval
= qla2x00_mailbox_command(vha
, mcp
);
3137 if (rval
!= QLA_SUCCESS
)
3138 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x mb0=%x.\n",
3139 __func__
, vha
->host_no
, rval
, mcp
->mb
[0]));
3144 qla25xx_init_rsp_que(struct scsi_qla_host
*vha
, struct rsp_que
*rsp
)
3147 unsigned long flags
;
3149 mbx_cmd_t
*mcp
= &mc
;
3150 struct device_reg_25xxmq __iomem
*reg
;
3151 struct qla_hw_data
*ha
= vha
->hw
;
3153 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3154 mcp
->mb
[1] = rsp
->options
;
3155 mcp
->mb
[2] = MSW(LSD(rsp
->dma
));
3156 mcp
->mb
[3] = LSW(LSD(rsp
->dma
));
3157 mcp
->mb
[6] = MSW(MSD(rsp
->dma
));
3158 mcp
->mb
[7] = LSW(MSD(rsp
->dma
));
3159 mcp
->mb
[5] = rsp
->length
;
3160 mcp
->mb
[11] = rsp
->vp_idx
;
3161 mcp
->mb
[14] = rsp
->msix
->entry
;
3162 mcp
->mb
[13] = rsp
->rid
;
3164 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3165 QLA_QUE_PAGE
* rsp
->id
);
3167 mcp
->mb
[4] = rsp
->id
;
3168 /* que in ptr index */
3170 /* que out ptr index */
3172 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
3173 |MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3175 mcp
->flags
= MBX_DMA_OUT
;
3178 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3179 if (!(rsp
->options
& BIT_0
)) {
3180 WRT_REG_DWORD(®
->rsp_q_out
, 0);
3181 WRT_REG_DWORD(®
->rsp_q_in
, 0);
3184 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3186 rval
= qla2x00_mailbox_command(vha
, mcp
);
3187 if (rval
!= QLA_SUCCESS
)
3188 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x "
3189 "mb0=%x.\n", __func__
,
3190 vha
->host_no
, rval
, mcp
->mb
[0]));
3195 qla81xx_idc_ack(scsi_qla_host_t
*vha
, uint16_t *mb
)
3199 mbx_cmd_t
*mcp
= &mc
;
3201 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3203 mcp
->mb
[0] = MBC_IDC_ACK
;
3204 memcpy(&mcp
->mb
[1], mb
, QLA_IDC_ACK_REGS
* sizeof(uint16_t));
3205 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3207 mcp
->tov
= MBX_TOV_SECONDS
;
3209 rval
= qla2x00_mailbox_command(vha
, mcp
);
3211 if (rval
!= QLA_SUCCESS
) {
3212 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3213 vha
->host_no
, rval
, mcp
->mb
[0]));
3215 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));