IB/ipath: Improved support for PowerPC

[linux-2.6/x86.git] / drivers / infiniband / hw / ipath / ipath_init_chip.c

/*
 * Copyright (c) 2006 QLogic, Inc. All rights reserved.
 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>

#include "ipath_kernel.h"
#include "ipath_common.h"

/*
 * min buffers we want to have per port, after driver
 */
#define IPATH_MIN_USER_PORT_BUFCNT 8

/*
 * Number of ports we are configured to use (to allow for more pio
 * buffers per port, etc.)  Zero means use chip value.
 */
static ushort ipath_cfgports;

module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
MODULE_PARM_DESC(cfgports, "Set max number of ports to use");

/*
 * Number of buffers reserved for driver (verbs and layered drivers.)
 * Reserved at end of buffer list.   Initialized based on
 * number of PIO buffers if not set via module interface.
 * The problem with this is that it's global, but we'll use different
 * numbers for different chip types.  So the default value is not
 * very useful.  I've redefined it for the 1.3 release so that it's
 * zero unless set by the user to something else, in which case we
 * try to respect it.
 */
static ushort ipath_kpiobufs;

static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);

module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
                  &ipath_kpiobufs, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");

/**
 * create_port0_egr - allocate the eager TID buffers
 * @dd: the infinipath device
 *
 * This code is now quite different for user and kernel, because
 * the kernel uses skb's, for the accelerated network performance.
 * This is the kernel (port0) version.
 *
 * Allocate the eager TID buffers and program them into infinipath.
 * We use the network layer alloc_skb() allocator to allocate the
 * memory, and either use the buffers as is for things like verbs
 * packets, or pass the buffers up to the ipath layered driver and
 * thence the network layer, replacing them as we do so (see
 * ipath_rcv_layer()).
 */
static int create_port0_egr(struct ipath_devdata *dd)
{
        unsigned e, egrcnt;
        struct ipath_skbinfo *skbinfo;
        int ret;

        egrcnt = dd->ipath_rcvegrcnt;

        skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
        if (skbinfo == NULL) {
                ipath_dev_err(dd, "allocation error for eager TID "
                              "skb array\n");
                ret = -ENOMEM;
                goto bail;
        }
        for (e = 0; e < egrcnt; e++) {
                /*
                 * This is a bit tricky in that we allocate extra
                 * space for 2 bytes of the 14 byte ethernet header.
                 * These two bytes are passed in the ipath header so
                 * the rest of the data is word aligned.  We allocate
                 * 4 bytes so that the data buffer stays word aligned.
                 * See ipath_kreceive() for more details.
                 */
                skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
                if (!skbinfo[e].skb) {
                        ipath_dev_err(dd, "SKB allocation error for "
                                      "eager TID %u\n", e);
                        while (e != 0)
                                dev_kfree_skb(skbinfo[--e].skb);
                        vfree(skbinfo);
                        ret = -ENOMEM;
                        goto bail;
                }
        }
        /*
         * After loop above, so we can test non-NULL to see if ready
         * to use at receive, etc.
         */
        dd->ipath_port0_skbinfo = skbinfo;

        for (e = 0; e < egrcnt; e++) {
                dd->ipath_port0_skbinfo[e].phys =
                  ipath_map_single(dd->pcidev,
                                   dd->ipath_port0_skbinfo[e].skb->data,
                                   dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
                dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
                                    ((char __iomem *) dd->ipath_kregbase +
                                     dd->ipath_rcvegrbase), 0,
                                    dd->ipath_port0_skbinfo[e].phys);
        }

        ret = 0;

bail:
        return ret;
}

static int bringup_link(struct ipath_devdata *dd)
{
        u64 val, ibc;
        int ret = 0;

        /* hold IBC in reset */
        dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
        ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
                         dd->ipath_control);

        /*
         * Note that prior to try 14 or 15 of IB, the credit scaling
         * wasn't working, because it was swapped for writes with the
         * 1 bit default linkstate field
         */

        /* ignore pbc and align word */
        val = dd->ipath_piosize2k - 2 * sizeof(u32);
        /*
         * for ICRC, which we only send in diag test pkt mode, and we
         * don't need to worry about that for mtu
         */
        val += 1;
        /*
         * Set the IBC maxpktlength to the size of our pio buffers the
         * maxpktlength is in words.  This is *not* the IB data MTU.
         */
        ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
        /* in KB */
        ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
        /*
         * How often flowctrl sent.  More or less in usecs; balance against
         * watermark value, so that in theory senders always get a flow
         * control update in time to not let the IB link go idle.
         */
        ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
        /* max error tolerance */
        ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
        /* use "real" buffer space for */
        ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
        /* IB credit flow control. */
        ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
        /* initially come up waiting for TS1, without sending anything. */
        dd->ipath_ibcctrl = ibc;
        /*
         * Want to start out with both LINKCMD and LINKINITCMD in NOP
         * (0 and 0).  Don't put linkinitcmd in ipath_ibcctrl, want that
         * to stay a NOP
         */
        ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
                INFINIPATH_IBCC_LINKINITCMD_SHIFT;
        ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
                   (unsigned long long) ibc);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);

        // be sure chip saw it
        val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);

        ret = dd->ipath_f_bringup_serdes(dd);

        if (ret)
                dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
                         "not usable\n");
        else {
                /* enable IBC */
                dd->ipath_control |= INFINIPATH_C_LINKENABLE;
                ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
                                 dd->ipath_control);
        }

        return ret;
}

static int init_chip_first(struct ipath_devdata *dd,
                           struct ipath_portdata **pdp)
{
        struct ipath_portdata *pd = NULL;
        int ret = 0;
        u64 val;

        /*
         * skip cfgports stuff because we are not allocating memory,
         * and we don't want problems if the portcnt changed due to
         * cfgports.  We do still check and report a difference, if
         * not same (should be impossible).
         */
        dd->ipath_portcnt =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
        if (!ipath_cfgports)
                dd->ipath_cfgports = dd->ipath_portcnt;
        else if (ipath_cfgports <= dd->ipath_portcnt) {
                dd->ipath_cfgports = ipath_cfgports;
                ipath_dbg("Configured to use %u ports out of %u in chip\n",
                          dd->ipath_cfgports, dd->ipath_portcnt);
        } else {
                dd->ipath_cfgports = dd->ipath_portcnt;
                ipath_dbg("Tried to configured to use %u ports; chip "
                          "only supports %u\n", ipath_cfgports,
                          dd->ipath_portcnt);
        }
        /*
         * Allocate full portcnt array, rather than just cfgports, because
         * cleanup iterates across all possible ports.
         */
        dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_portcnt,
                               GFP_KERNEL);

        if (!dd->ipath_pd) {
                ipath_dev_err(dd, "Unable to allocate portdata array, "
                              "failing\n");
                ret = -ENOMEM;
                goto done;
        }

        dd->ipath_lastegrheads = kzalloc(sizeof(*dd->ipath_lastegrheads)
                                         * dd->ipath_cfgports,
                                         GFP_KERNEL);
        dd->ipath_lastrcvhdrqtails =
                kzalloc(sizeof(*dd->ipath_lastrcvhdrqtails)
                        * dd->ipath_cfgports, GFP_KERNEL);

        if (!dd->ipath_lastegrheads || !dd->ipath_lastrcvhdrqtails) {
                ipath_dev_err(dd, "Unable to allocate head arrays, "
                              "failing\n");
                ret = -ENOMEM;
                goto done;
        }

        dd->ipath_pd[0] = kzalloc(sizeof(*pd), GFP_KERNEL);

        if (!dd->ipath_pd[0]) {
                ipath_dev_err(dd, "Unable to allocate portdata for port "
                              "0, failing\n");
                ret = -ENOMEM;
                goto done;
        }
        pd = dd->ipath_pd[0];
        pd->port_dd = dd;
        pd->port_port = 0;
        pd->port_cnt = 1;
        /* The port 0 pkey table is used by the layer interface. */
        pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
        dd->ipath_rcvtidcnt =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
        dd->ipath_rcvtidbase =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
        dd->ipath_rcvegrcnt =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
        dd->ipath_rcvegrbase =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
        dd->ipath_palign =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
        dd->ipath_piobufbase =
                ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
        val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
        dd->ipath_piosize2k = val & ~0U;
        dd->ipath_piosize4k = val >> 32;
        dd->ipath_ibmtu = 4096; /* default to largest legal MTU */
        val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
        dd->ipath_piobcnt2k = val & ~0U;
        dd->ipath_piobcnt4k = val >> 32;
        dd->ipath_pio2kbase =
                (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
                                 (dd->ipath_piobufbase & 0xffffffff));
        if (dd->ipath_piobcnt4k) {
                dd->ipath_pio4kbase = (u32 __iomem *)
                        (((char __iomem *) dd->ipath_kregbase) +
                         (dd->ipath_piobufbase >> 32));
                /*
                 * 4K buffers take 2 pages; we use roundup just to be
                 * paranoid; we calculate it once here, rather than on
                 * ever buf allocate
                 */
                dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
                                          dd->ipath_palign);
                ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
                          "(%x aligned)\n",
                          dd->ipath_piobcnt2k, dd->ipath_piosize2k,
                          dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
                          dd->ipath_piosize4k, dd->ipath_pio4kbase,
                          dd->ipath_4kalign);
        }
        else ipath_dbg("%u 2k piobufs @ %p\n",
                       dd->ipath_piobcnt2k, dd->ipath_pio2kbase);

        spin_lock_init(&dd->ipath_tid_lock);

done:
        *pdp = pd;
        return ret;
}

/**
 * init_chip_reset - re-initialize after a reset, or enable
 * @dd: the infinipath device
 * @pdp: output for port data
 *
 * sanity check at least some of the values after reset, and
 * ensure no receive or transmit (explictly, in case reset
 * failed
 */
static int init_chip_reset(struct ipath_devdata *dd,
                           struct ipath_portdata **pdp)
{
        struct ipath_portdata *pd;
        u32 rtmp;

        *pdp = pd = dd->ipath_pd[0];
        /* ensure chip does no sends or receives while we re-initialize */
        dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U;
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0);

        rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
        if (dd->ipath_portcnt != rtmp)
                dev_info(&dd->pcidev->dev, "portcnt was %u before "
                         "reset, now %u, using original\n",
                         dd->ipath_portcnt, rtmp);
        rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
        if (rtmp != dd->ipath_rcvtidcnt)
                dev_info(&dd->pcidev->dev, "tidcnt was %u before "
                         "reset, now %u, using original\n",
                         dd->ipath_rcvtidcnt, rtmp);
        rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
        if (rtmp != dd->ipath_rcvtidbase)
                dev_info(&dd->pcidev->dev, "tidbase was %u before "
                         "reset, now %u, using original\n",
                         dd->ipath_rcvtidbase, rtmp);
        rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
        if (rtmp != dd->ipath_rcvegrcnt)
                dev_info(&dd->pcidev->dev, "egrcnt was %u before "
                         "reset, now %u, using original\n",
                         dd->ipath_rcvegrcnt, rtmp);
        rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
        if (rtmp != dd->ipath_rcvegrbase)
                dev_info(&dd->pcidev->dev, "egrbase was %u before "
                         "reset, now %u, using original\n",
                         dd->ipath_rcvegrbase, rtmp);

        return 0;
}

static int init_pioavailregs(struct ipath_devdata *dd)
{
        int ret;

        dd->ipath_pioavailregs_dma = dma_alloc_coherent(
                &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
                GFP_KERNEL);
        if (!dd->ipath_pioavailregs_dma) {
                ipath_dev_err(dd, "failed to allocate PIOavail reg area "
                              "in memory\n");
                ret = -ENOMEM;
                goto done;
        }

        /*
         * we really want L2 cache aligned, but for current CPUs of
         * interest, they are the same.
         */
        dd->ipath_statusp = (u64 *)
                ((char *)dd->ipath_pioavailregs_dma +
                 ((2 * L1_CACHE_BYTES +
                   dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
        /* copy the current value now that it's really allocated */
        *dd->ipath_statusp = dd->_ipath_status;
        /*
         * setup buffer to hold freeze msg, accessible to apps,
         * following statusp
         */
        dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
        /* and its length */
        dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);

        ret = 0;

done:
        return ret;
}

/**
 * init_shadow_tids - allocate the shadow TID array
 * @dd: the infinipath device
 *
 * allocate the shadow TID array, so we can ipath_munlock previous
 * entries.  It may make more sense to move the pageshadow to the
 * port data structure, so we only allocate memory for ports actually
 * in use, since we at 8k per port, now.
 */
static void init_shadow_tids(struct ipath_devdata *dd)
{
        struct page **pages;
        dma_addr_t *addrs;

        pages = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
                        sizeof(struct page *));
        if (!pages) {
                ipath_dev_err(dd, "failed to allocate shadow page * "
                              "array, no expected sends!\n");
                dd->ipath_pageshadow = NULL;
                return;
        }

        addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
                        sizeof(dma_addr_t));
        if (!addrs) {
                ipath_dev_err(dd, "failed to allocate shadow dma handle "
                              "array, no expected sends!\n");
                vfree(dd->ipath_pageshadow);
                dd->ipath_pageshadow = NULL;
                return;
        }

        memset(pages, 0, dd->ipath_cfgports * dd->ipath_rcvtidcnt *
               sizeof(struct page *));

        dd->ipath_pageshadow = pages;
        dd->ipath_physshadow = addrs;
}

static void enable_chip(struct ipath_devdata *dd,
                        struct ipath_portdata *pd, int reinit)
{
        u32 val;
        int i;

        if (!reinit)
                init_waitqueue_head(&ipath_state_wait);

        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                         dd->ipath_rcvctrl);

        /* Enable PIO send, and update of PIOavail regs to memory. */
        dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
                INFINIPATH_S_PIOBUFAVAILUPD;
        ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                         dd->ipath_sendctrl);

        /*
         * enable port 0 receive, and receive interrupt.  other ports
         * done as user opens and inits them.
         */
        dd->ipath_rcvctrl = INFINIPATH_R_TAILUPD |
                (1ULL << INFINIPATH_R_PORTENABLE_SHIFT) |
                (1ULL << INFINIPATH_R_INTRAVAIL_SHIFT);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                         dd->ipath_rcvctrl);

        /*
         * now ready for use.  this should be cleared whenever we
         * detect a reset, or initiate one.
         */
        dd->ipath_flags |= IPATH_INITTED;

        /*
         * init our shadow copies of head from tail values, and write
         * head values to match.
         */
        val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
        (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
        dd->ipath_port0head = ipath_read_ureg32(dd, ur_rcvhdrtail, 0);

        /* Initialize so we interrupt on next packet received */
        (void)ipath_write_ureg(dd, ur_rcvhdrhead,
                               dd->ipath_rhdrhead_intr_off |
                               dd->ipath_port0head, 0);

        /*
         * by now pioavail updates to memory should have occurred, so
         * copy them into our working/shadow registers; this is in
         * case something went wrong with abort, but mostly to get the
         * initial values of the generation bit correct.
         */
        for (i = 0; i < dd->ipath_pioavregs; i++) {
                __le64 val;

                /*
                 * Chip Errata bug 6641; even and odd qwords>3 are swapped.
                 */
                if (i > 3) {
                        if (i & 1)
                                val = dd->ipath_pioavailregs_dma[i - 1];
                        else
                                val = dd->ipath_pioavailregs_dma[i + 1];
                }
                else
                        val = dd->ipath_pioavailregs_dma[i];
                dd->ipath_pioavailshadow[i] = le64_to_cpu(val);
        }
        /* can get counters, stats, etc. */
        dd->ipath_flags |= IPATH_PRESENT;
}

static int init_housekeeping(struct ipath_devdata *dd,
                             struct ipath_portdata **pdp, int reinit)
{
        char boardn[32];
        int ret = 0;

        /*
         * have to clear shadow copies of registers at init that are
         * not otherwise set here, or all kinds of bizarre things
         * happen with driver on chip reset
         */
        dd->ipath_rcvhdrsize = 0;

        /*
         * Don't clear ipath_flags as 8bit mode was set before
         * entering this func. However, we do set the linkstate to
         * unknown, so we can watch for a transition.
         * PRESENT is set because we want register reads to work,
         * and the kernel infrastructure saw it in config space;
         * We clear it if we have failures.
         */
        dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
        dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
                             IPATH_LINKDOWN | IPATH_LINKINIT);

        ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
        dd->ipath_revision =
                ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);

        /*
         * set up fundamental info we need to use the chip; we assume
         * if the revision reg and these regs are OK, we don't need to
         * special case the rest
         */
        dd->ipath_sregbase =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
        dd->ipath_cregbase =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
        dd->ipath_uregbase =
                ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
        ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
                   "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
                   dd->ipath_uregbase, dd->ipath_cregbase);
        if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
            || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
            || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
            || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
                ipath_dev_err(dd, "Register read failures from chip, "
                              "giving up initialization\n");
                dd->ipath_flags &= ~IPATH_PRESENT;
                ret = -ENODEV;
                goto done;
        }

        /* clear the initial reset flag, in case first driver load */
        ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
                         INFINIPATH_E_RESET);

        if (reinit)
                ret = init_chip_reset(dd, pdp);
        else
                ret = init_chip_first(dd, pdp);

        if (ret)
                goto done;

        ipath_cdbg(VERBOSE, "Revision %llx (PCI %x), %u ports, %u tids, "
                   "%u egrtids\n", (unsigned long long) dd->ipath_revision,
                   dd->ipath_pcirev, dd->ipath_portcnt, dd->ipath_rcvtidcnt,
                   dd->ipath_rcvegrcnt);

        if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
             INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
                ipath_dev_err(dd, "Driver only handles version %d, "
                              "chip swversion is %d (%llx), failng\n",
                              IPATH_CHIP_SWVERSION,
                              (int)(dd->ipath_revision >>
                                    INFINIPATH_R_SOFTWARE_SHIFT) &
                              INFINIPATH_R_SOFTWARE_MASK,
                              (unsigned long long) dd->ipath_revision);
                ret = -ENOSYS;
                goto done;
        }
        dd->ipath_majrev = (u8) ((dd->ipath_revision >>
                                  INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
                                 INFINIPATH_R_CHIPREVMAJOR_MASK);
        dd->ipath_minrev = (u8) ((dd->ipath_revision >>
                                  INFINIPATH_R_CHIPREVMINOR_SHIFT) &
                                 INFINIPATH_R_CHIPREVMINOR_MASK);
        dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
                                    INFINIPATH_R_BOARDID_SHIFT) &
                                   INFINIPATH_R_BOARDID_MASK);

        ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);

        snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
                 "Driver %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
                 "SW Compat %u\n",
                 IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
                 (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
                 INFINIPATH_R_ARCH_MASK,
                 dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
                 (unsigned)(dd->ipath_revision >>
                            INFINIPATH_R_SOFTWARE_SHIFT) &
                 INFINIPATH_R_SOFTWARE_MASK);

        ipath_dbg("%s", dd->ipath_boardversion);

done:
        return ret;
}


/**
 * ipath_init_chip - do the actual initialization sequence on the chip
 * @dd: the infinipath device
 * @reinit: reinitializing, so don't allocate new memory
 *
 * Do the actual initialization sequence on the chip.  This is done
 * both from the init routine called from the PCI infrastructure, and
 * when we reset the chip, or detect that it was reset internally,
 * or it's administratively re-enabled.
 *
 * Memory allocation here and in called routines is only done in
 * the first case (reinit == 0).  We have to be careful, because even
 * without memory allocation, we need to re-write all the chip registers
 * TIDs, etc. after the reset or enable has completed.
 */
int ipath_init_chip(struct ipath_devdata *dd, int reinit)
{
        int ret = 0, i;
        u32 val32, kpiobufs;
        u64 val;
        struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
        gfp_t gfp_flags = GFP_USER | __GFP_COMP;

        ret = init_housekeeping(dd, &pd, reinit);
        if (ret)
                goto done;

        /*
         * we ignore most issues after reporting them, but have to specially
         * handle hardware-disabled chips.
         */
        if (ret == 2) {
                /* unique error, known to ipath_init_one */
                ret = -EPERM;
                goto done;
        }

        /*
         * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
         * but then it no longer nicely fits power of two, and since
         * we now use routines that backend onto __get_free_pages, the
         * rest would be wasted.
         */
        dd->ipath_rcvhdrcnt = dd->ipath_rcvegrcnt;
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
                         dd->ipath_rcvhdrcnt);

        /*
         * Set up the shadow copies of the piobufavail registers,
         * which we compare against the chip registers for now, and
         * the in memory DMA'ed copies of the registers.  This has to
         * be done early, before we calculate lastport, etc.
         */
        val = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
        /*
         * calc number of pioavail registers, and save it; we have 2
         * bits per buffer.
         */
        dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
                / (sizeof(u64) * BITS_PER_BYTE / 2);
        if (ipath_kpiobufs == 0) {
                /* not set by user (this is default) */
                if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
                        kpiobufs = 32;
                else
                        kpiobufs = 16;
        }
        else
                kpiobufs = ipath_kpiobufs;

        if (kpiobufs >
            (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
             (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT))) {
                i = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
                        (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT);
                if (i < 0)
                        i = 0;
                dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs for "
                         "kernel leaves too few for %d user ports "
                         "(%d each); using %u\n", kpiobufs,
                         dd->ipath_cfgports - 1,
                         IPATH_MIN_USER_PORT_BUFCNT, i);
                /*
                 * shouldn't change ipath_kpiobufs, because could be
                 * different for different devices...
                 */
                kpiobufs = i;
        }
        dd->ipath_lastport_piobuf =
                dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - kpiobufs;
        dd->ipath_pbufsport = dd->ipath_cfgports > 1
                ? dd->ipath_lastport_piobuf / (dd->ipath_cfgports - 1)
                : 0;
        val32 = dd->ipath_lastport_piobuf -
                (dd->ipath_pbufsport * (dd->ipath_cfgports - 1));
        if (val32 > 0) {
                ipath_dbg("allocating %u pbufs/port leaves %u unused, "
                          "add to kernel\n", dd->ipath_pbufsport, val32);
                dd->ipath_lastport_piobuf -= val32;
                ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n",
                          dd->ipath_pbufsport, val32);
        }
        dd->ipath_lastpioindex = dd->ipath_lastport_piobuf;
        ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
                   "each for %u user ports\n", kpiobufs,
                   dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
                   dd->ipath_pbufsport, dd->ipath_cfgports - 1);

        dd->ipath_f_early_init(dd);

        /* early_init sets rcvhdrentsize and rcvhdrsize, so this must be
         * done after early_init */
        dd->ipath_hdrqlast =
                dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
                         dd->ipath_rcvhdrentsize);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
                         dd->ipath_rcvhdrsize);

        if (!reinit) {
                ret = init_pioavailregs(dd);
                init_shadow_tids(dd);
                if (ret)
                        goto done;
        }

        (void)ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
                               dd->ipath_pioavailregs_phys);
        /*
         * this is to detect s/w errors, which the h/w works around by
         * ignoring the low 6 bits of address, if it wasn't aligned.
         */
        val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
        if (val != dd->ipath_pioavailregs_phys) {
                ipath_dev_err(dd, "Catastrophic software error, "
                              "SendPIOAvailAddr written as %lx, "
                              "read back as %llx\n",
                              (unsigned long) dd->ipath_pioavailregs_phys,
                              (unsigned long long) val);
                ret = -EINVAL;
                goto done;
        }

        ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);

        /*
         * make sure we are not in freeze, and PIO send enabled, so
         * writes to pbc happen
         */
        ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
                         ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                         INFINIPATH_S_PIOENABLE);

        /*
         * before error clears, since we expect serdes pll errors during
         * this, the first time after reset
         */
        if (bringup_link(dd)) {
                dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
                ret = -ENETDOWN;
                goto done;
        }

        /*
         * clear any "expected" hwerrs from reset and/or initialization
         * clear any that aren't enabled (at least this once), and then
         * set the enable mask
         */
        dd->ipath_f_init_hwerrors(dd);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
                         ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
        ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
                         dd->ipath_hwerrmask);

        dd->ipath_maskederrs = dd->ipath_ignorederrs;
        /* clear all */
        ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
        /* enable errors that are masked, at least this first time. */
        ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
                         ~dd->ipath_maskederrs);
        /* clear any interrups up to this point (ints still not enabled) */
        ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);

        /*
         * Set up the port 0 (kernel) rcvhdr q and egr TIDs.  If doing
         * re-init, the simplest way to handle this is to free
         * existing, and re-allocate.
         */
        if (reinit) {
                struct ipath_portdata *pd = dd->ipath_pd[0];
                dd->ipath_pd[0] = NULL;
                ipath_free_pddata(dd, pd);
        }
        dd->ipath_f_tidtemplate(dd);
        ret = ipath_create_rcvhdrq(dd, pd);
        if (!ret) {
                dd->ipath_hdrqtailptr =
                        (volatile __le64 *)pd->port_rcvhdrtail_kvaddr;
                ret = create_port0_egr(dd);
        }
        if (ret)
                ipath_dev_err(dd, "failed to allocate port 0 (kernel) "
                              "rcvhdrq and/or egr bufs\n");
        else
                enable_chip(dd, pd, reinit);


        if (!ret && !reinit) {
            /* used when we close a port, for DMA already in flight at close */
                dd->ipath_dummy_hdrq = dma_alloc_coherent(
                        &dd->pcidev->dev, pd->port_rcvhdrq_size,
                        &dd->ipath_dummy_hdrq_phys,
                        gfp_flags);
                if (!dd->ipath_dummy_hdrq ) {
                        dev_info(&dd->pcidev->dev,
                                "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
                                pd->port_rcvhdrq_size);
                        /* fallback to just 0'ing */
                        dd->ipath_dummy_hdrq_phys = 0UL;
                }
        }

        /*
         * cause retrigger of pending interrupts ignored during init,
         * even if we had errors
         */
        ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);

        if(!dd->ipath_stats_timer_active) {
                /*
                 * first init, or after an admin disable/enable
                 * set up stats retrieval timer, even if we had errors
                 * in last portion of setup
                 */
                init_timer(&dd->ipath_stats_timer);
                dd->ipath_stats_timer.function = ipath_get_faststats;
                dd->ipath_stats_timer.data = (unsigned long) dd;
                /* every 5 seconds; */
                dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
                /* takes ~16 seconds to overflow at full IB 4x bandwdith */
                add_timer(&dd->ipath_stats_timer);
                dd->ipath_stats_timer_active = 1;
        }

done:
        if (!ret) {
                *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
                if (!dd->ipath_f_intrsetup(dd)) {
                        /* now we can enable all interrupts from the chip */
                        ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
                                         -1LL);
                        /* force re-interrupt of any pending interrupts. */
                        ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
                                         0ULL);
                        /* chip is usable; mark it as initialized */
                        *dd->ipath_statusp |= IPATH_STATUS_INITTED;
                } else
                        ipath_dev_err(dd, "No interrupts enabled, couldn't "
                                      "setup interrupt address\n");

                if (dd->ipath_cfgports > ipath_stats.sps_nports)
                        /*
                         * sps_nports is a global, so, we set it to
                         * the highest number of ports of any of the
                         * chips we find; we never decrement it, at
                         * least for now.  Since this might have changed
                         * over disable/enable or prior to reset, always
                         * do the check and potentially adjust.
                         */
                        ipath_stats.sps_nports = dd->ipath_cfgports;
        } else
                ipath_dbg("Failed (%d) to initialize chip\n", ret);

        /* if ret is non-zero, we probably should do some cleanup
           here... */
        return ret;
}

static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
{
        struct ipath_devdata *dd;
        unsigned long flags;
        unsigned short val;
        int ret;

        ret = ipath_parse_ushort(str, &val);

        spin_lock_irqsave(&ipath_devs_lock, flags);

        if (ret < 0)
                goto bail;

        if (val == 0) {
                ret = -EINVAL;
                goto bail;
        }

        list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
                if (dd->ipath_kregbase)
                        continue;
                if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
                           (dd->ipath_cfgports *
                            IPATH_MIN_USER_PORT_BUFCNT)))
                {
                        ipath_dev_err(
                                dd,
                                "Allocating %d PIO bufs for kernel leaves "
                                "too few for %d user ports (%d each)\n",
                                val, dd->ipath_cfgports - 1,
                                IPATH_MIN_USER_PORT_BUFCNT);
                        ret = -EINVAL;
                        goto bail;
                }
                dd->ipath_lastport_piobuf =
                        dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
        }

        ipath_kpiobufs = val;
        ret = 0;
bail:
        spin_unlock_irqrestore(&ipath_devs_lock, flags);

        return ret;
}