[CPUFREQ] cleanup up -ENOMEM handling in cpufreq_add_dev
[linux-2.6/x86.git] / drivers / cpufreq / cpufreq.c
blob06eeff3c822f70531a0d8c051f5be84f97b3d0da
1 /*
2 * linux/drivers/cpufreq/cpufreq.c
4 * Copyright (C) 2001 Russell King
5 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
7 * Oct 2005 - Ashok Raj <ashok.raj@intel.com>
8 * Added handling for CPU hotplug
9 * Feb 2006 - Jacob Shin <jacob.shin@amd.com>
10 * Fix handling for CPU hotplug -- affected CPUs
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/notifier.h>
22 #include <linux/cpufreq.h>
23 #include <linux/delay.h>
24 #include <linux/interrupt.h>
25 #include <linux/spinlock.h>
26 #include <linux/device.h>
27 #include <linux/slab.h>
28 #include <linux/cpu.h>
29 #include <linux/completion.h>
30 #include <linux/mutex.h>
32 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
33 "cpufreq-core", msg)
35 /**
36 * The "cpufreq driver" - the arch- or hardware-dependent low
37 * level driver of CPUFreq support, and its spinlock. This lock
38 * also protects the cpufreq_cpu_data array.
40 static struct cpufreq_driver *cpufreq_driver;
41 static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data);
42 #ifdef CONFIG_HOTPLUG_CPU
43 /* This one keeps track of the previously set governor of a removed CPU */
44 static DEFINE_PER_CPU(struct cpufreq_governor *, cpufreq_cpu_governor);
45 #endif
46 static DEFINE_SPINLOCK(cpufreq_driver_lock);
49 * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure
50 * all cpufreq/hotplug/workqueue/etc related lock issues.
52 * The rules for this semaphore:
53 * - Any routine that wants to read from the policy structure will
54 * do a down_read on this semaphore.
55 * - Any routine that will write to the policy structure and/or may take away
56 * the policy altogether (eg. CPU hotplug), will hold this lock in write
57 * mode before doing so.
59 * Additional rules:
60 * - All holders of the lock should check to make sure that the CPU they
61 * are concerned with are online after they get the lock.
62 * - Governor routines that can be called in cpufreq hotplug path should not
63 * take this sem as top level hotplug notifier handler takes this.
65 static DEFINE_PER_CPU(int, policy_cpu);
66 static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
68 #define lock_policy_rwsem(mode, cpu) \
69 int lock_policy_rwsem_##mode \
70 (int cpu) \
71 { \
72 int policy_cpu = per_cpu(policy_cpu, cpu); \
73 BUG_ON(policy_cpu == -1); \
74 down_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
75 if (unlikely(!cpu_online(cpu))) { \
76 up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
77 return -1; \
78 } \
80 return 0; \
83 lock_policy_rwsem(read, cpu);
84 EXPORT_SYMBOL_GPL(lock_policy_rwsem_read);
86 lock_policy_rwsem(write, cpu);
87 EXPORT_SYMBOL_GPL(lock_policy_rwsem_write);
89 void unlock_policy_rwsem_read(int cpu)
91 int policy_cpu = per_cpu(policy_cpu, cpu);
92 BUG_ON(policy_cpu == -1);
93 up_read(&per_cpu(cpu_policy_rwsem, policy_cpu));
95 EXPORT_SYMBOL_GPL(unlock_policy_rwsem_read);
97 void unlock_policy_rwsem_write(int cpu)
99 int policy_cpu = per_cpu(policy_cpu, cpu);
100 BUG_ON(policy_cpu == -1);
101 up_write(&per_cpu(cpu_policy_rwsem, policy_cpu));
103 EXPORT_SYMBOL_GPL(unlock_policy_rwsem_write);
106 /* internal prototypes */
107 static int __cpufreq_governor(struct cpufreq_policy *policy,
108 unsigned int event);
109 static unsigned int __cpufreq_get(unsigned int cpu);
110 static void handle_update(struct work_struct *work);
113 * Two notifier lists: the "policy" list is involved in the
114 * validation process for a new CPU frequency policy; the
115 * "transition" list for kernel code that needs to handle
116 * changes to devices when the CPU clock speed changes.
117 * The mutex locks both lists.
119 static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list);
120 static struct srcu_notifier_head cpufreq_transition_notifier_list;
122 static bool init_cpufreq_transition_notifier_list_called;
123 static int __init init_cpufreq_transition_notifier_list(void)
125 srcu_init_notifier_head(&cpufreq_transition_notifier_list);
126 init_cpufreq_transition_notifier_list_called = true;
127 return 0;
129 pure_initcall(init_cpufreq_transition_notifier_list);
131 static LIST_HEAD(cpufreq_governor_list);
132 static DEFINE_MUTEX(cpufreq_governor_mutex);
134 struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
136 struct cpufreq_policy *data;
137 unsigned long flags;
139 if (cpu >= nr_cpu_ids)
140 goto err_out;
142 /* get the cpufreq driver */
143 spin_lock_irqsave(&cpufreq_driver_lock, flags);
145 if (!cpufreq_driver)
146 goto err_out_unlock;
148 if (!try_module_get(cpufreq_driver->owner))
149 goto err_out_unlock;
152 /* get the CPU */
153 data = per_cpu(cpufreq_cpu_data, cpu);
155 if (!data)
156 goto err_out_put_module;
158 if (!kobject_get(&data->kobj))
159 goto err_out_put_module;
161 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
162 return data;
164 err_out_put_module:
165 module_put(cpufreq_driver->owner);
166 err_out_unlock:
167 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
168 err_out:
169 return NULL;
171 EXPORT_SYMBOL_GPL(cpufreq_cpu_get);
174 void cpufreq_cpu_put(struct cpufreq_policy *data)
176 kobject_put(&data->kobj);
177 module_put(cpufreq_driver->owner);
179 EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
182 /*********************************************************************
183 * UNIFIED DEBUG HELPERS *
184 *********************************************************************/
185 #ifdef CONFIG_CPU_FREQ_DEBUG
187 /* what part(s) of the CPUfreq subsystem are debugged? */
188 static unsigned int debug;
190 /* is the debug output ratelimit'ed using printk_ratelimit? User can
191 * set or modify this value.
193 static unsigned int debug_ratelimit = 1;
195 /* is the printk_ratelimit'ing enabled? It's enabled after a successful
196 * loading of a cpufreq driver, temporarily disabled when a new policy
197 * is set, and disabled upon cpufreq driver removal
199 static unsigned int disable_ratelimit = 1;
200 static DEFINE_SPINLOCK(disable_ratelimit_lock);
202 static void cpufreq_debug_enable_ratelimit(void)
204 unsigned long flags;
206 spin_lock_irqsave(&disable_ratelimit_lock, flags);
207 if (disable_ratelimit)
208 disable_ratelimit--;
209 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
212 static void cpufreq_debug_disable_ratelimit(void)
214 unsigned long flags;
216 spin_lock_irqsave(&disable_ratelimit_lock, flags);
217 disable_ratelimit++;
218 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
221 void cpufreq_debug_printk(unsigned int type, const char *prefix,
222 const char *fmt, ...)
224 char s[256];
225 va_list args;
226 unsigned int len;
227 unsigned long flags;
229 WARN_ON(!prefix);
230 if (type & debug) {
231 spin_lock_irqsave(&disable_ratelimit_lock, flags);
232 if (!disable_ratelimit && debug_ratelimit
233 && !printk_ratelimit()) {
234 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
235 return;
237 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
239 len = snprintf(s, 256, KERN_DEBUG "%s: ", prefix);
241 va_start(args, fmt);
242 len += vsnprintf(&s[len], (256 - len), fmt, args);
243 va_end(args);
245 printk(s);
247 WARN_ON(len < 5);
250 EXPORT_SYMBOL(cpufreq_debug_printk);
253 module_param(debug, uint, 0644);
254 MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
255 " 2 to debug drivers, and 4 to debug governors.");
257 module_param(debug_ratelimit, uint, 0644);
258 MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
259 " set to 0 to disable ratelimiting.");
261 #else /* !CONFIG_CPU_FREQ_DEBUG */
263 static inline void cpufreq_debug_enable_ratelimit(void) { return; }
264 static inline void cpufreq_debug_disable_ratelimit(void) { return; }
266 #endif /* CONFIG_CPU_FREQ_DEBUG */
269 /*********************************************************************
270 * EXTERNALLY AFFECTING FREQUENCY CHANGES *
271 *********************************************************************/
274 * adjust_jiffies - adjust the system "loops_per_jiffy"
276 * This function alters the system "loops_per_jiffy" for the clock
277 * speed change. Note that loops_per_jiffy cannot be updated on SMP
278 * systems as each CPU might be scaled differently. So, use the arch
279 * per-CPU loops_per_jiffy value wherever possible.
281 #ifndef CONFIG_SMP
282 static unsigned long l_p_j_ref;
283 static unsigned int l_p_j_ref_freq;
285 static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
287 if (ci->flags & CPUFREQ_CONST_LOOPS)
288 return;
290 if (!l_p_j_ref_freq) {
291 l_p_j_ref = loops_per_jiffy;
292 l_p_j_ref_freq = ci->old;
293 dprintk("saving %lu as reference value for loops_per_jiffy; "
294 "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
296 if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
297 (val == CPUFREQ_POSTCHANGE && ci->old > ci->new) ||
298 (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
299 loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
300 ci->new);
301 dprintk("scaling loops_per_jiffy to %lu "
302 "for frequency %u kHz\n", loops_per_jiffy, ci->new);
305 #else
306 static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
308 return;
310 #endif
314 * cpufreq_notify_transition - call notifier chain and adjust_jiffies
315 * on frequency transition.
317 * This function calls the transition notifiers and the "adjust_jiffies"
318 * function. It is called twice on all CPU frequency changes that have
319 * external effects.
321 void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
323 struct cpufreq_policy *policy;
325 BUG_ON(irqs_disabled());
327 freqs->flags = cpufreq_driver->flags;
328 dprintk("notification %u of frequency transition to %u kHz\n",
329 state, freqs->new);
331 policy = per_cpu(cpufreq_cpu_data, freqs->cpu);
332 switch (state) {
334 case CPUFREQ_PRECHANGE:
335 /* detect if the driver reported a value as "old frequency"
336 * which is not equal to what the cpufreq core thinks is
337 * "old frequency".
339 if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
340 if ((policy) && (policy->cpu == freqs->cpu) &&
341 (policy->cur) && (policy->cur != freqs->old)) {
342 dprintk("Warning: CPU frequency is"
343 " %u, cpufreq assumed %u kHz.\n",
344 freqs->old, policy->cur);
345 freqs->old = policy->cur;
348 srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
349 CPUFREQ_PRECHANGE, freqs);
350 adjust_jiffies(CPUFREQ_PRECHANGE, freqs);
351 break;
353 case CPUFREQ_POSTCHANGE:
354 adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
355 srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
356 CPUFREQ_POSTCHANGE, freqs);
357 if (likely(policy) && likely(policy->cpu == freqs->cpu))
358 policy->cur = freqs->new;
359 break;
362 EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
366 /*********************************************************************
367 * SYSFS INTERFACE *
368 *********************************************************************/
370 static struct cpufreq_governor *__find_governor(const char *str_governor)
372 struct cpufreq_governor *t;
374 list_for_each_entry(t, &cpufreq_governor_list, governor_list)
375 if (!strnicmp(str_governor, t->name, CPUFREQ_NAME_LEN))
376 return t;
378 return NULL;
382 * cpufreq_parse_governor - parse a governor string
384 static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
385 struct cpufreq_governor **governor)
387 int err = -EINVAL;
389 if (!cpufreq_driver)
390 goto out;
392 if (cpufreq_driver->setpolicy) {
393 if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
394 *policy = CPUFREQ_POLICY_PERFORMANCE;
395 err = 0;
396 } else if (!strnicmp(str_governor, "powersave",
397 CPUFREQ_NAME_LEN)) {
398 *policy = CPUFREQ_POLICY_POWERSAVE;
399 err = 0;
401 } else if (cpufreq_driver->target) {
402 struct cpufreq_governor *t;
404 mutex_lock(&cpufreq_governor_mutex);
406 t = __find_governor(str_governor);
408 if (t == NULL) {
409 char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
410 str_governor);
412 if (name) {
413 int ret;
415 mutex_unlock(&cpufreq_governor_mutex);
416 ret = request_module("%s", name);
417 mutex_lock(&cpufreq_governor_mutex);
419 if (ret == 0)
420 t = __find_governor(str_governor);
423 kfree(name);
426 if (t != NULL) {
427 *governor = t;
428 err = 0;
431 mutex_unlock(&cpufreq_governor_mutex);
433 out:
434 return err;
439 * cpufreq_per_cpu_attr_read() / show_##file_name() -
440 * print out cpufreq information
442 * Write out information from cpufreq_driver->policy[cpu]; object must be
443 * "unsigned int".
446 #define show_one(file_name, object) \
447 static ssize_t show_##file_name \
448 (struct cpufreq_policy *policy, char *buf) \
450 return sprintf(buf, "%u\n", policy->object); \
453 show_one(cpuinfo_min_freq, cpuinfo.min_freq);
454 show_one(cpuinfo_max_freq, cpuinfo.max_freq);
455 show_one(cpuinfo_transition_latency, cpuinfo.transition_latency);
456 show_one(scaling_min_freq, min);
457 show_one(scaling_max_freq, max);
458 show_one(scaling_cur_freq, cur);
460 static int __cpufreq_set_policy(struct cpufreq_policy *data,
461 struct cpufreq_policy *policy);
464 * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
466 #define store_one(file_name, object) \
467 static ssize_t store_##file_name \
468 (struct cpufreq_policy *policy, const char *buf, size_t count) \
470 unsigned int ret = -EINVAL; \
471 struct cpufreq_policy new_policy; \
473 ret = cpufreq_get_policy(&new_policy, policy->cpu); \
474 if (ret) \
475 return -EINVAL; \
477 ret = sscanf(buf, "%u", &new_policy.object); \
478 if (ret != 1) \
479 return -EINVAL; \
481 ret = __cpufreq_set_policy(policy, &new_policy); \
482 policy->user_policy.object = policy->object; \
484 return ret ? ret : count; \
487 store_one(scaling_min_freq, min);
488 store_one(scaling_max_freq, max);
491 * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
493 static ssize_t show_cpuinfo_cur_freq(struct cpufreq_policy *policy,
494 char *buf)
496 unsigned int cur_freq = __cpufreq_get(policy->cpu);
497 if (!cur_freq)
498 return sprintf(buf, "<unknown>");
499 return sprintf(buf, "%u\n", cur_freq);
504 * show_scaling_governor - show the current policy for the specified CPU
506 static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf)
508 if (policy->policy == CPUFREQ_POLICY_POWERSAVE)
509 return sprintf(buf, "powersave\n");
510 else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
511 return sprintf(buf, "performance\n");
512 else if (policy->governor)
513 return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n",
514 policy->governor->name);
515 return -EINVAL;
520 * store_scaling_governor - store policy for the specified CPU
522 static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
523 const char *buf, size_t count)
525 unsigned int ret = -EINVAL;
526 char str_governor[16];
527 struct cpufreq_policy new_policy;
529 ret = cpufreq_get_policy(&new_policy, policy->cpu);
530 if (ret)
531 return ret;
533 ret = sscanf(buf, "%15s", str_governor);
534 if (ret != 1)
535 return -EINVAL;
537 if (cpufreq_parse_governor(str_governor, &new_policy.policy,
538 &new_policy.governor))
539 return -EINVAL;
541 /* Do not use cpufreq_set_policy here or the user_policy.max
542 will be wrongly overridden */
543 ret = __cpufreq_set_policy(policy, &new_policy);
545 policy->user_policy.policy = policy->policy;
546 policy->user_policy.governor = policy->governor;
548 if (ret)
549 return ret;
550 else
551 return count;
555 * show_scaling_driver - show the cpufreq driver currently loaded
557 static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf)
559 return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name);
563 * show_scaling_available_governors - show the available CPUfreq governors
565 static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy,
566 char *buf)
568 ssize_t i = 0;
569 struct cpufreq_governor *t;
571 if (!cpufreq_driver->target) {
572 i += sprintf(buf, "performance powersave");
573 goto out;
576 list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
577 if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
578 - (CPUFREQ_NAME_LEN + 2)))
579 goto out;
580 i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
582 out:
583 i += sprintf(&buf[i], "\n");
584 return i;
587 static ssize_t show_cpus(const struct cpumask *mask, char *buf)
589 ssize_t i = 0;
590 unsigned int cpu;
592 for_each_cpu(cpu, mask) {
593 if (i)
594 i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " ");
595 i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu);
596 if (i >= (PAGE_SIZE - 5))
597 break;
599 i += sprintf(&buf[i], "\n");
600 return i;
604 * show_related_cpus - show the CPUs affected by each transition even if
605 * hw coordination is in use
607 static ssize_t show_related_cpus(struct cpufreq_policy *policy, char *buf)
609 if (cpumask_empty(policy->related_cpus))
610 return show_cpus(policy->cpus, buf);
611 return show_cpus(policy->related_cpus, buf);
615 * show_affected_cpus - show the CPUs affected by each transition
617 static ssize_t show_affected_cpus(struct cpufreq_policy *policy, char *buf)
619 return show_cpus(policy->cpus, buf);
622 static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy,
623 const char *buf, size_t count)
625 unsigned int freq = 0;
626 unsigned int ret;
628 if (!policy->governor || !policy->governor->store_setspeed)
629 return -EINVAL;
631 ret = sscanf(buf, "%u", &freq);
632 if (ret != 1)
633 return -EINVAL;
635 policy->governor->store_setspeed(policy, freq);
637 return count;
640 static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
642 if (!policy->governor || !policy->governor->show_setspeed)
643 return sprintf(buf, "<unsupported>\n");
645 return policy->governor->show_setspeed(policy, buf);
648 #define define_one_ro(_name) \
649 static struct freq_attr _name = \
650 __ATTR(_name, 0444, show_##_name, NULL)
652 #define define_one_ro0400(_name) \
653 static struct freq_attr _name = \
654 __ATTR(_name, 0400, show_##_name, NULL)
656 #define define_one_rw(_name) \
657 static struct freq_attr _name = \
658 __ATTR(_name, 0644, show_##_name, store_##_name)
660 define_one_ro0400(cpuinfo_cur_freq);
661 define_one_ro(cpuinfo_min_freq);
662 define_one_ro(cpuinfo_max_freq);
663 define_one_ro(cpuinfo_transition_latency);
664 define_one_ro(scaling_available_governors);
665 define_one_ro(scaling_driver);
666 define_one_ro(scaling_cur_freq);
667 define_one_ro(related_cpus);
668 define_one_ro(affected_cpus);
669 define_one_rw(scaling_min_freq);
670 define_one_rw(scaling_max_freq);
671 define_one_rw(scaling_governor);
672 define_one_rw(scaling_setspeed);
674 static struct attribute *default_attrs[] = {
675 &cpuinfo_min_freq.attr,
676 &cpuinfo_max_freq.attr,
677 &cpuinfo_transition_latency.attr,
678 &scaling_min_freq.attr,
679 &scaling_max_freq.attr,
680 &affected_cpus.attr,
681 &related_cpus.attr,
682 &scaling_governor.attr,
683 &scaling_driver.attr,
684 &scaling_available_governors.attr,
685 &scaling_setspeed.attr,
686 NULL
689 #define to_policy(k) container_of(k, struct cpufreq_policy, kobj)
690 #define to_attr(a) container_of(a, struct freq_attr, attr)
692 static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
694 struct cpufreq_policy *policy = to_policy(kobj);
695 struct freq_attr *fattr = to_attr(attr);
696 ssize_t ret = -EINVAL;
697 policy = cpufreq_cpu_get(policy->cpu);
698 if (!policy)
699 goto no_policy;
701 if (lock_policy_rwsem_read(policy->cpu) < 0)
702 goto fail;
704 if (fattr->show)
705 ret = fattr->show(policy, buf);
706 else
707 ret = -EIO;
709 unlock_policy_rwsem_read(policy->cpu);
710 fail:
711 cpufreq_cpu_put(policy);
712 no_policy:
713 return ret;
716 static ssize_t store(struct kobject *kobj, struct attribute *attr,
717 const char *buf, size_t count)
719 struct cpufreq_policy *policy = to_policy(kobj);
720 struct freq_attr *fattr = to_attr(attr);
721 ssize_t ret = -EINVAL;
722 policy = cpufreq_cpu_get(policy->cpu);
723 if (!policy)
724 goto no_policy;
726 if (lock_policy_rwsem_write(policy->cpu) < 0)
727 goto fail;
729 if (fattr->store)
730 ret = fattr->store(policy, buf, count);
731 else
732 ret = -EIO;
734 unlock_policy_rwsem_write(policy->cpu);
735 fail:
736 cpufreq_cpu_put(policy);
737 no_policy:
738 return ret;
741 static void cpufreq_sysfs_release(struct kobject *kobj)
743 struct cpufreq_policy *policy = to_policy(kobj);
744 dprintk("last reference is dropped\n");
745 complete(&policy->kobj_unregister);
748 static struct sysfs_ops sysfs_ops = {
749 .show = show,
750 .store = store,
753 static struct kobj_type ktype_cpufreq = {
754 .sysfs_ops = &sysfs_ops,
755 .default_attrs = default_attrs,
756 .release = cpufreq_sysfs_release,
761 * cpufreq_add_dev - add a CPU device
763 * Adds the cpufreq interface for a CPU device.
765 * The Oracle says: try running cpufreq registration/unregistration concurrently
766 * with with cpu hotplugging and all hell will break loose. Tried to clean this
767 * mess up, but more thorough testing is needed. - Mathieu
769 static int cpufreq_add_dev(struct sys_device *sys_dev)
771 unsigned int cpu = sys_dev->id;
772 int ret = 0;
773 struct cpufreq_policy new_policy;
774 struct cpufreq_policy *policy;
775 struct freq_attr **drv_attr;
776 unsigned long flags;
777 unsigned int j;
779 if (cpu_is_offline(cpu))
780 return 0;
782 cpufreq_debug_disable_ratelimit();
783 dprintk("adding CPU %u\n", cpu);
785 #ifdef CONFIG_SMP
786 /* check whether a different CPU already registered this
787 * CPU because it is in the same boat. */
788 policy = cpufreq_cpu_get(cpu);
789 if (unlikely(policy)) {
790 cpufreq_cpu_put(policy);
791 cpufreq_debug_enable_ratelimit();
792 return 0;
794 #endif
796 if (!try_module_get(cpufreq_driver->owner)) {
797 ret = -EINVAL;
798 goto module_out;
801 ret = -ENOMEM;
802 policy = kzalloc(sizeof(struct cpufreq_policy), GFP_KERNEL);
803 if (!policy)
804 goto nomem_out;
806 if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL))
807 goto err_free_policy;
809 if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL))
810 goto err_free_cpumask;
812 policy->cpu = cpu;
813 cpumask_copy(policy->cpus, cpumask_of(cpu));
815 /* Initially set CPU itself as the policy_cpu */
816 per_cpu(policy_cpu, cpu) = cpu;
817 ret = (lock_policy_rwsem_write(cpu) < 0);
818 WARN_ON(ret);
820 init_completion(&policy->kobj_unregister);
821 INIT_WORK(&policy->update, handle_update);
823 /* Set governor before ->init, so that driver could check it */
824 policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
825 /* call driver. From then on the cpufreq must be able
826 * to accept all calls to ->verify and ->setpolicy for this CPU
828 ret = cpufreq_driver->init(policy);
829 if (ret) {
830 dprintk("initialization failed\n");
831 goto err_unlock_policy;
833 policy->user_policy.min = policy->min;
834 policy->user_policy.max = policy->max;
836 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
837 CPUFREQ_START, policy);
839 #ifdef CONFIG_SMP
841 #ifdef CONFIG_HOTPLUG_CPU
842 if (per_cpu(cpufreq_cpu_governor, cpu)) {
843 policy->governor = per_cpu(cpufreq_cpu_governor, cpu);
844 dprintk("Restoring governor %s for cpu %d\n",
845 policy->governor->name, cpu);
847 #endif
849 for_each_cpu(j, policy->cpus) {
850 struct cpufreq_policy *managed_policy;
852 if (cpu == j)
853 continue;
855 /* Check for existing affected CPUs.
856 * They may not be aware of it due to CPU Hotplug.
857 * cpufreq_cpu_put is called when the device is removed
858 * in __cpufreq_remove_dev()
860 managed_policy = cpufreq_cpu_get(j);
861 if (unlikely(managed_policy)) {
863 /* Set proper policy_cpu */
864 unlock_policy_rwsem_write(cpu);
865 per_cpu(policy_cpu, cpu) = managed_policy->cpu;
867 if (lock_policy_rwsem_write(cpu) < 0) {
868 /* Should not go through policy unlock path */
869 if (cpufreq_driver->exit)
870 cpufreq_driver->exit(policy);
871 ret = -EBUSY;
872 cpufreq_cpu_put(managed_policy);
873 goto err_free_cpumask;
876 spin_lock_irqsave(&cpufreq_driver_lock, flags);
877 cpumask_copy(managed_policy->cpus, policy->cpus);
878 per_cpu(cpufreq_cpu_data, cpu) = managed_policy;
879 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
881 dprintk("CPU already managed, adding link\n");
882 ret = sysfs_create_link(&sys_dev->kobj,
883 &managed_policy->kobj,
884 "cpufreq");
885 if (ret)
886 cpufreq_cpu_put(managed_policy);
888 * Success. We only needed to be added to the mask.
889 * Call driver->exit() because only the cpu parent of
890 * the kobj needed to call init().
892 goto out_driver_exit; /* call driver->exit() */
895 #endif
896 memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
898 /* prepare interface data */
899 ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
900 "cpufreq");
901 if (ret)
902 goto out_driver_exit;
904 /* set up files for this cpu device */
905 drv_attr = cpufreq_driver->attr;
906 while ((drv_attr) && (*drv_attr)) {
907 ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
908 if (ret)
909 goto err_out_kobj_put;
910 drv_attr++;
912 if (cpufreq_driver->get) {
913 ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
914 if (ret)
915 goto err_out_kobj_put;
917 if (cpufreq_driver->target) {
918 ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
919 if (ret)
920 goto err_out_kobj_put;
923 spin_lock_irqsave(&cpufreq_driver_lock, flags);
924 for_each_cpu(j, policy->cpus) {
925 if (!cpu_online(j))
926 continue;
927 per_cpu(cpufreq_cpu_data, j) = policy;
928 per_cpu(policy_cpu, j) = policy->cpu;
930 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
932 /* symlink affected CPUs */
933 for_each_cpu(j, policy->cpus) {
934 struct cpufreq_policy *managed_policy;
935 struct sys_device *cpu_sys_dev;
937 if (j == cpu)
938 continue;
939 if (!cpu_online(j))
940 continue;
942 dprintk("CPU %u already managed, adding link\n", j);
943 managed_policy = cpufreq_cpu_get(cpu);
944 cpu_sys_dev = get_cpu_sysdev(j);
945 ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
946 "cpufreq");
947 if (ret) {
948 cpufreq_cpu_put(managed_policy);
949 goto err_out_unregister;
953 policy->governor = NULL; /* to assure that the starting sequence is
954 * run in cpufreq_set_policy */
956 /* set default policy */
957 ret = __cpufreq_set_policy(policy, &new_policy);
958 policy->user_policy.policy = policy->policy;
959 policy->user_policy.governor = policy->governor;
961 if (ret) {
962 dprintk("setting policy failed\n");
963 goto err_out_unregister;
966 unlock_policy_rwsem_write(cpu);
968 kobject_uevent(&policy->kobj, KOBJ_ADD);
969 module_put(cpufreq_driver->owner);
970 dprintk("initialization complete\n");
971 cpufreq_debug_enable_ratelimit();
973 return 0;
976 err_out_unregister:
977 spin_lock_irqsave(&cpufreq_driver_lock, flags);
978 for_each_cpu(j, policy->cpus)
979 per_cpu(cpufreq_cpu_data, j) = NULL;
980 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
982 err_out_kobj_put:
983 kobject_put(&policy->kobj);
984 wait_for_completion(&policy->kobj_unregister);
986 out_driver_exit:
987 if (cpufreq_driver->exit)
988 cpufreq_driver->exit(policy);
990 err_unlock_policy:
991 unlock_policy_rwsem_write(cpu);
992 err_free_cpumask:
993 free_cpumask_var(policy->cpus);
994 err_free_policy:
995 kfree(policy);
996 nomem_out:
997 module_put(cpufreq_driver->owner);
998 module_out:
999 cpufreq_debug_enable_ratelimit();
1000 return ret;
1005 * __cpufreq_remove_dev - remove a CPU device
1007 * Removes the cpufreq interface for a CPU device.
1008 * Caller should already have policy_rwsem in write mode for this CPU.
1009 * This routine frees the rwsem before returning.
1011 static int __cpufreq_remove_dev(struct sys_device *sys_dev)
1013 unsigned int cpu = sys_dev->id;
1014 unsigned long flags;
1015 struct cpufreq_policy *data;
1016 #ifdef CONFIG_SMP
1017 struct sys_device *cpu_sys_dev;
1018 unsigned int j;
1019 #endif
1021 cpufreq_debug_disable_ratelimit();
1022 dprintk("unregistering CPU %u\n", cpu);
1024 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1025 data = per_cpu(cpufreq_cpu_data, cpu);
1027 if (!data) {
1028 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1029 cpufreq_debug_enable_ratelimit();
1030 unlock_policy_rwsem_write(cpu);
1031 return -EINVAL;
1033 per_cpu(cpufreq_cpu_data, cpu) = NULL;
1036 #ifdef CONFIG_SMP
1037 /* if this isn't the CPU which is the parent of the kobj, we
1038 * only need to unlink, put and exit
1040 if (unlikely(cpu != data->cpu)) {
1041 dprintk("removing link\n");
1042 cpumask_clear_cpu(cpu, data->cpus);
1043 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1044 sysfs_remove_link(&sys_dev->kobj, "cpufreq");
1045 cpufreq_cpu_put(data);
1046 cpufreq_debug_enable_ratelimit();
1047 unlock_policy_rwsem_write(cpu);
1048 return 0;
1050 #endif
1052 #ifdef CONFIG_SMP
1054 #ifdef CONFIG_HOTPLUG_CPU
1055 per_cpu(cpufreq_cpu_governor, cpu) = data->governor;
1056 #endif
1058 /* if we have other CPUs still registered, we need to unlink them,
1059 * or else wait_for_completion below will lock up. Clean the
1060 * per_cpu(cpufreq_cpu_data) while holding the lock, and remove
1061 * the sysfs links afterwards.
1063 if (unlikely(cpumask_weight(data->cpus) > 1)) {
1064 for_each_cpu(j, data->cpus) {
1065 if (j == cpu)
1066 continue;
1067 per_cpu(cpufreq_cpu_data, j) = NULL;
1071 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1073 if (unlikely(cpumask_weight(data->cpus) > 1)) {
1074 for_each_cpu(j, data->cpus) {
1075 if (j == cpu)
1076 continue;
1077 dprintk("removing link for cpu %u\n", j);
1078 #ifdef CONFIG_HOTPLUG_CPU
1079 per_cpu(cpufreq_cpu_governor, j) = data->governor;
1080 #endif
1081 cpu_sys_dev = get_cpu_sysdev(j);
1082 sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq");
1083 cpufreq_cpu_put(data);
1086 #else
1087 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1088 #endif
1090 if (cpufreq_driver->target)
1091 __cpufreq_governor(data, CPUFREQ_GOV_STOP);
1093 kobject_put(&data->kobj);
1095 /* we need to make sure that the underlying kobj is actually
1096 * not referenced anymore by anybody before we proceed with
1097 * unloading.
1099 dprintk("waiting for dropping of refcount\n");
1100 wait_for_completion(&data->kobj_unregister);
1101 dprintk("wait complete\n");
1103 if (cpufreq_driver->exit)
1104 cpufreq_driver->exit(data);
1106 unlock_policy_rwsem_write(cpu);
1108 free_cpumask_var(data->related_cpus);
1109 free_cpumask_var(data->cpus);
1110 kfree(data);
1111 per_cpu(cpufreq_cpu_data, cpu) = NULL;
1113 cpufreq_debug_enable_ratelimit();
1114 return 0;
1118 static int cpufreq_remove_dev(struct sys_device *sys_dev)
1120 unsigned int cpu = sys_dev->id;
1121 int retval;
1123 if (cpu_is_offline(cpu))
1124 return 0;
1126 if (unlikely(lock_policy_rwsem_write(cpu)))
1127 BUG();
1129 retval = __cpufreq_remove_dev(sys_dev);
1130 return retval;
1134 static void handle_update(struct work_struct *work)
1136 struct cpufreq_policy *policy =
1137 container_of(work, struct cpufreq_policy, update);
1138 unsigned int cpu = policy->cpu;
1139 dprintk("handle_update for cpu %u called\n", cpu);
1140 cpufreq_update_policy(cpu);
1144 * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble.
1145 * @cpu: cpu number
1146 * @old_freq: CPU frequency the kernel thinks the CPU runs at
1147 * @new_freq: CPU frequency the CPU actually runs at
1149 * We adjust to current frequency first, and need to clean up later.
1150 * So either call to cpufreq_update_policy() or schedule handle_update()).
1152 static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
1153 unsigned int new_freq)
1155 struct cpufreq_freqs freqs;
1157 dprintk("Warning: CPU frequency out of sync: cpufreq and timing "
1158 "core thinks of %u, is %u kHz.\n", old_freq, new_freq);
1160 freqs.cpu = cpu;
1161 freqs.old = old_freq;
1162 freqs.new = new_freq;
1163 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
1164 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
1169 * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
1170 * @cpu: CPU number
1172 * This is the last known freq, without actually getting it from the driver.
1173 * Return value will be same as what is shown in scaling_cur_freq in sysfs.
1175 unsigned int cpufreq_quick_get(unsigned int cpu)
1177 struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
1178 unsigned int ret_freq = 0;
1180 if (policy) {
1181 ret_freq = policy->cur;
1182 cpufreq_cpu_put(policy);
1185 return ret_freq;
1187 EXPORT_SYMBOL(cpufreq_quick_get);
1190 static unsigned int __cpufreq_get(unsigned int cpu)
1192 struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
1193 unsigned int ret_freq = 0;
1195 if (!cpufreq_driver->get)
1196 return ret_freq;
1198 ret_freq = cpufreq_driver->get(cpu);
1200 if (ret_freq && policy->cur &&
1201 !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
1202 /* verify no discrepancy between actual and
1203 saved value exists */
1204 if (unlikely(ret_freq != policy->cur)) {
1205 cpufreq_out_of_sync(cpu, policy->cur, ret_freq);
1206 schedule_work(&policy->update);
1210 return ret_freq;
1214 * cpufreq_get - get the current CPU frequency (in kHz)
1215 * @cpu: CPU number
1217 * Get the CPU current (static) CPU frequency
1219 unsigned int cpufreq_get(unsigned int cpu)
1221 unsigned int ret_freq = 0;
1222 struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
1224 if (!policy)
1225 goto out;
1227 if (unlikely(lock_policy_rwsem_read(cpu)))
1228 goto out_policy;
1230 ret_freq = __cpufreq_get(cpu);
1232 unlock_policy_rwsem_read(cpu);
1234 out_policy:
1235 cpufreq_cpu_put(policy);
1236 out:
1237 return ret_freq;
1239 EXPORT_SYMBOL(cpufreq_get);
1243 * cpufreq_suspend - let the low level driver prepare for suspend
1246 static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
1248 int ret = 0;
1250 int cpu = sysdev->id;
1251 struct cpufreq_policy *cpu_policy;
1253 dprintk("suspending cpu %u\n", cpu);
1255 if (!cpu_online(cpu))
1256 return 0;
1258 /* we may be lax here as interrupts are off. Nonetheless
1259 * we need to grab the correct cpu policy, as to check
1260 * whether we really run on this CPU.
1263 cpu_policy = cpufreq_cpu_get(cpu);
1264 if (!cpu_policy)
1265 return -EINVAL;
1267 /* only handle each CPU group once */
1268 if (unlikely(cpu_policy->cpu != cpu))
1269 goto out;
1271 if (cpufreq_driver->suspend) {
1272 ret = cpufreq_driver->suspend(cpu_policy, pmsg);
1273 if (ret)
1274 printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
1275 "step on CPU %u\n", cpu_policy->cpu);
1278 out:
1279 cpufreq_cpu_put(cpu_policy);
1280 return ret;
1284 * cpufreq_resume - restore proper CPU frequency handling after resume
1286 * 1.) resume CPUfreq hardware support (cpufreq_driver->resume())
1287 * 2.) schedule call cpufreq_update_policy() ASAP as interrupts are
1288 * restored. It will verify that the current freq is in sync with
1289 * what we believe it to be. This is a bit later than when it
1290 * should be, but nonethteless it's better than calling
1291 * cpufreq_driver->get() here which might re-enable interrupts...
1293 static int cpufreq_resume(struct sys_device *sysdev)
1295 int ret = 0;
1297 int cpu = sysdev->id;
1298 struct cpufreq_policy *cpu_policy;
1300 dprintk("resuming cpu %u\n", cpu);
1302 if (!cpu_online(cpu))
1303 return 0;
1305 /* we may be lax here as interrupts are off. Nonetheless
1306 * we need to grab the correct cpu policy, as to check
1307 * whether we really run on this CPU.
1310 cpu_policy = cpufreq_cpu_get(cpu);
1311 if (!cpu_policy)
1312 return -EINVAL;
1314 /* only handle each CPU group once */
1315 if (unlikely(cpu_policy->cpu != cpu))
1316 goto fail;
1318 if (cpufreq_driver->resume) {
1319 ret = cpufreq_driver->resume(cpu_policy);
1320 if (ret) {
1321 printk(KERN_ERR "cpufreq: resume failed in ->resume "
1322 "step on CPU %u\n", cpu_policy->cpu);
1323 goto fail;
1327 schedule_work(&cpu_policy->update);
1329 fail:
1330 cpufreq_cpu_put(cpu_policy);
1331 return ret;
1334 static struct sysdev_driver cpufreq_sysdev_driver = {
1335 .add = cpufreq_add_dev,
1336 .remove = cpufreq_remove_dev,
1337 .suspend = cpufreq_suspend,
1338 .resume = cpufreq_resume,
1342 /*********************************************************************
1343 * NOTIFIER LISTS INTERFACE *
1344 *********************************************************************/
1347 * cpufreq_register_notifier - register a driver with cpufreq
1348 * @nb: notifier function to register
1349 * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
1351 * Add a driver to one of two lists: either a list of drivers that
1352 * are notified about clock rate changes (once before and once after
1353 * the transition), or a list of drivers that are notified about
1354 * changes in cpufreq policy.
1356 * This function may sleep, and has the same return conditions as
1357 * blocking_notifier_chain_register.
1359 int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
1361 int ret;
1363 WARN_ON(!init_cpufreq_transition_notifier_list_called);
1365 switch (list) {
1366 case CPUFREQ_TRANSITION_NOTIFIER:
1367 ret = srcu_notifier_chain_register(
1368 &cpufreq_transition_notifier_list, nb);
1369 break;
1370 case CPUFREQ_POLICY_NOTIFIER:
1371 ret = blocking_notifier_chain_register(
1372 &cpufreq_policy_notifier_list, nb);
1373 break;
1374 default:
1375 ret = -EINVAL;
1378 return ret;
1380 EXPORT_SYMBOL(cpufreq_register_notifier);
1384 * cpufreq_unregister_notifier - unregister a driver with cpufreq
1385 * @nb: notifier block to be unregistered
1386 * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
1388 * Remove a driver from the CPU frequency notifier list.
1390 * This function may sleep, and has the same return conditions as
1391 * blocking_notifier_chain_unregister.
1393 int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list)
1395 int ret;
1397 switch (list) {
1398 case CPUFREQ_TRANSITION_NOTIFIER:
1399 ret = srcu_notifier_chain_unregister(
1400 &cpufreq_transition_notifier_list, nb);
1401 break;
1402 case CPUFREQ_POLICY_NOTIFIER:
1403 ret = blocking_notifier_chain_unregister(
1404 &cpufreq_policy_notifier_list, nb);
1405 break;
1406 default:
1407 ret = -EINVAL;
1410 return ret;
1412 EXPORT_SYMBOL(cpufreq_unregister_notifier);
1415 /*********************************************************************
1416 * GOVERNORS *
1417 *********************************************************************/
1420 int __cpufreq_driver_target(struct cpufreq_policy *policy,
1421 unsigned int target_freq,
1422 unsigned int relation)
1424 int retval = -EINVAL;
1426 dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
1427 target_freq, relation);
1428 if (cpu_online(policy->cpu) && cpufreq_driver->target)
1429 retval = cpufreq_driver->target(policy, target_freq, relation);
1431 return retval;
1433 EXPORT_SYMBOL_GPL(__cpufreq_driver_target);
1435 int cpufreq_driver_target(struct cpufreq_policy *policy,
1436 unsigned int target_freq,
1437 unsigned int relation)
1439 int ret = -EINVAL;
1441 policy = cpufreq_cpu_get(policy->cpu);
1442 if (!policy)
1443 goto no_policy;
1445 if (unlikely(lock_policy_rwsem_write(policy->cpu)))
1446 goto fail;
1448 ret = __cpufreq_driver_target(policy, target_freq, relation);
1450 unlock_policy_rwsem_write(policy->cpu);
1452 fail:
1453 cpufreq_cpu_put(policy);
1454 no_policy:
1455 return ret;
1457 EXPORT_SYMBOL_GPL(cpufreq_driver_target);
1459 int __cpufreq_driver_getavg(struct cpufreq_policy *policy, unsigned int cpu)
1461 int ret = 0;
1463 policy = cpufreq_cpu_get(policy->cpu);
1464 if (!policy)
1465 return -EINVAL;
1467 if (cpu_online(cpu) && cpufreq_driver->getavg)
1468 ret = cpufreq_driver->getavg(policy, cpu);
1470 cpufreq_cpu_put(policy);
1471 return ret;
1473 EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg);
1476 * when "event" is CPUFREQ_GOV_LIMITS
1479 static int __cpufreq_governor(struct cpufreq_policy *policy,
1480 unsigned int event)
1482 int ret;
1484 /* Only must be defined when default governor is known to have latency
1485 restrictions, like e.g. conservative or ondemand.
1486 That this is the case is already ensured in Kconfig
1488 #ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
1489 struct cpufreq_governor *gov = &cpufreq_gov_performance;
1490 #else
1491 struct cpufreq_governor *gov = NULL;
1492 #endif
1494 if (policy->governor->max_transition_latency &&
1495 policy->cpuinfo.transition_latency >
1496 policy->governor->max_transition_latency) {
1497 if (!gov)
1498 return -EINVAL;
1499 else {
1500 printk(KERN_WARNING "%s governor failed, too long"
1501 " transition latency of HW, fallback"
1502 " to %s governor\n",
1503 policy->governor->name,
1504 gov->name);
1505 policy->governor = gov;
1509 if (!try_module_get(policy->governor->owner))
1510 return -EINVAL;
1512 dprintk("__cpufreq_governor for CPU %u, event %u\n",
1513 policy->cpu, event);
1514 ret = policy->governor->governor(policy, event);
1516 /* we keep one module reference alive for
1517 each CPU governed by this CPU */
1518 if ((event != CPUFREQ_GOV_START) || ret)
1519 module_put(policy->governor->owner);
1520 if ((event == CPUFREQ_GOV_STOP) && !ret)
1521 module_put(policy->governor->owner);
1523 return ret;
1527 int cpufreq_register_governor(struct cpufreq_governor *governor)
1529 int err;
1531 if (!governor)
1532 return -EINVAL;
1534 mutex_lock(&cpufreq_governor_mutex);
1536 err = -EBUSY;
1537 if (__find_governor(governor->name) == NULL) {
1538 err = 0;
1539 list_add(&governor->governor_list, &cpufreq_governor_list);
1542 mutex_unlock(&cpufreq_governor_mutex);
1543 return err;
1545 EXPORT_SYMBOL_GPL(cpufreq_register_governor);
1548 void cpufreq_unregister_governor(struct cpufreq_governor *governor)
1550 if (!governor)
1551 return;
1553 mutex_lock(&cpufreq_governor_mutex);
1554 list_del(&governor->governor_list);
1555 mutex_unlock(&cpufreq_governor_mutex);
1556 return;
1558 EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
1562 /*********************************************************************
1563 * POLICY INTERFACE *
1564 *********************************************************************/
1567 * cpufreq_get_policy - get the current cpufreq_policy
1568 * @policy: struct cpufreq_policy into which the current cpufreq_policy
1569 * is written
1571 * Reads the current cpufreq policy.
1573 int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu)
1575 struct cpufreq_policy *cpu_policy;
1576 if (!policy)
1577 return -EINVAL;
1579 cpu_policy = cpufreq_cpu_get(cpu);
1580 if (!cpu_policy)
1581 return -EINVAL;
1583 memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy));
1585 cpufreq_cpu_put(cpu_policy);
1586 return 0;
1588 EXPORT_SYMBOL(cpufreq_get_policy);
1592 * data : current policy.
1593 * policy : policy to be set.
1595 static int __cpufreq_set_policy(struct cpufreq_policy *data,
1596 struct cpufreq_policy *policy)
1598 int ret = 0;
1600 cpufreq_debug_disable_ratelimit();
1601 dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
1602 policy->min, policy->max);
1604 memcpy(&policy->cpuinfo, &data->cpuinfo,
1605 sizeof(struct cpufreq_cpuinfo));
1607 if (policy->min > data->max || policy->max < data->min) {
1608 ret = -EINVAL;
1609 goto error_out;
1612 /* verify the cpu speed can be set within this limit */
1613 ret = cpufreq_driver->verify(policy);
1614 if (ret)
1615 goto error_out;
1617 /* adjust if necessary - all reasons */
1618 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
1619 CPUFREQ_ADJUST, policy);
1621 /* adjust if necessary - hardware incompatibility*/
1622 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
1623 CPUFREQ_INCOMPATIBLE, policy);
1625 /* verify the cpu speed can be set within this limit,
1626 which might be different to the first one */
1627 ret = cpufreq_driver->verify(policy);
1628 if (ret)
1629 goto error_out;
1631 /* notification of the new policy */
1632 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
1633 CPUFREQ_NOTIFY, policy);
1635 data->min = policy->min;
1636 data->max = policy->max;
1638 dprintk("new min and max freqs are %u - %u kHz\n",
1639 data->min, data->max);
1641 if (cpufreq_driver->setpolicy) {
1642 data->policy = policy->policy;
1643 dprintk("setting range\n");
1644 ret = cpufreq_driver->setpolicy(policy);
1645 } else {
1646 if (policy->governor != data->governor) {
1647 /* save old, working values */
1648 struct cpufreq_governor *old_gov = data->governor;
1650 dprintk("governor switch\n");
1652 /* end old governor */
1653 if (data->governor)
1654 __cpufreq_governor(data, CPUFREQ_GOV_STOP);
1656 /* start new governor */
1657 data->governor = policy->governor;
1658 if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
1659 /* new governor failed, so re-start old one */
1660 dprintk("starting governor %s failed\n",
1661 data->governor->name);
1662 if (old_gov) {
1663 data->governor = old_gov;
1664 __cpufreq_governor(data,
1665 CPUFREQ_GOV_START);
1667 ret = -EINVAL;
1668 goto error_out;
1670 /* might be a policy change, too, so fall through */
1672 dprintk("governor: change or update limits\n");
1673 __cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
1676 error_out:
1677 cpufreq_debug_enable_ratelimit();
1678 return ret;
1682 * cpufreq_update_policy - re-evaluate an existing cpufreq policy
1683 * @cpu: CPU which shall be re-evaluated
1685 * Usefull for policy notifiers which have different necessities
1686 * at different times.
1688 int cpufreq_update_policy(unsigned int cpu)
1690 struct cpufreq_policy *data = cpufreq_cpu_get(cpu);
1691 struct cpufreq_policy policy;
1692 int ret;
1694 if (!data) {
1695 ret = -ENODEV;
1696 goto no_policy;
1699 if (unlikely(lock_policy_rwsem_write(cpu))) {
1700 ret = -EINVAL;
1701 goto fail;
1704 dprintk("updating policy for CPU %u\n", cpu);
1705 memcpy(&policy, data, sizeof(struct cpufreq_policy));
1706 policy.min = data->user_policy.min;
1707 policy.max = data->user_policy.max;
1708 policy.policy = data->user_policy.policy;
1709 policy.governor = data->user_policy.governor;
1711 /* BIOS might change freq behind our back
1712 -> ask driver for current freq and notify governors about a change */
1713 if (cpufreq_driver->get) {
1714 policy.cur = cpufreq_driver->get(cpu);
1715 if (!data->cur) {
1716 dprintk("Driver did not initialize current freq");
1717 data->cur = policy.cur;
1718 } else {
1719 if (data->cur != policy.cur)
1720 cpufreq_out_of_sync(cpu, data->cur,
1721 policy.cur);
1725 ret = __cpufreq_set_policy(data, &policy);
1727 unlock_policy_rwsem_write(cpu);
1729 fail:
1730 cpufreq_cpu_put(data);
1731 no_policy:
1732 return ret;
1734 EXPORT_SYMBOL(cpufreq_update_policy);
1736 static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
1737 unsigned long action, void *hcpu)
1739 unsigned int cpu = (unsigned long)hcpu;
1740 struct sys_device *sys_dev;
1742 sys_dev = get_cpu_sysdev(cpu);
1743 if (sys_dev) {
1744 switch (action) {
1745 case CPU_ONLINE:
1746 case CPU_ONLINE_FROZEN:
1747 cpufreq_add_dev(sys_dev);
1748 break;
1749 case CPU_DOWN_PREPARE:
1750 case CPU_DOWN_PREPARE_FROZEN:
1751 if (unlikely(lock_policy_rwsem_write(cpu)))
1752 BUG();
1754 __cpufreq_remove_dev(sys_dev);
1755 break;
1756 case CPU_DOWN_FAILED:
1757 case CPU_DOWN_FAILED_FROZEN:
1758 cpufreq_add_dev(sys_dev);
1759 break;
1762 return NOTIFY_OK;
1765 static struct notifier_block __refdata cpufreq_cpu_notifier =
1767 .notifier_call = cpufreq_cpu_callback,
1770 /*********************************************************************
1771 * REGISTER / UNREGISTER CPUFREQ DRIVER *
1772 *********************************************************************/
1775 * cpufreq_register_driver - register a CPU Frequency driver
1776 * @driver_data: A struct cpufreq_driver containing the values#
1777 * submitted by the CPU Frequency driver.
1779 * Registers a CPU Frequency driver to this core code. This code
1780 * returns zero on success, -EBUSY when another driver got here first
1781 * (and isn't unregistered in the meantime).
1784 int cpufreq_register_driver(struct cpufreq_driver *driver_data)
1786 unsigned long flags;
1787 int ret;
1789 if (!driver_data || !driver_data->verify || !driver_data->init ||
1790 ((!driver_data->setpolicy) && (!driver_data->target)))
1791 return -EINVAL;
1793 dprintk("trying to register driver %s\n", driver_data->name);
1795 if (driver_data->setpolicy)
1796 driver_data->flags |= CPUFREQ_CONST_LOOPS;
1798 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1799 if (cpufreq_driver) {
1800 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1801 return -EBUSY;
1803 cpufreq_driver = driver_data;
1804 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1806 ret = sysdev_driver_register(&cpu_sysdev_class,
1807 &cpufreq_sysdev_driver);
1809 if ((!ret) && !(cpufreq_driver->flags & CPUFREQ_STICKY)) {
1810 int i;
1811 ret = -ENODEV;
1813 /* check for at least one working CPU */
1814 for (i = 0; i < nr_cpu_ids; i++)
1815 if (cpu_possible(i) && per_cpu(cpufreq_cpu_data, i)) {
1816 ret = 0;
1817 break;
1820 /* if all ->init() calls failed, unregister */
1821 if (ret) {
1822 dprintk("no CPU initialized for driver %s\n",
1823 driver_data->name);
1824 sysdev_driver_unregister(&cpu_sysdev_class,
1825 &cpufreq_sysdev_driver);
1827 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1828 cpufreq_driver = NULL;
1829 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1833 if (!ret) {
1834 register_hotcpu_notifier(&cpufreq_cpu_notifier);
1835 dprintk("driver %s up and running\n", driver_data->name);
1836 cpufreq_debug_enable_ratelimit();
1839 return ret;
1841 EXPORT_SYMBOL_GPL(cpufreq_register_driver);
1845 * cpufreq_unregister_driver - unregister the current CPUFreq driver
1847 * Unregister the current CPUFreq driver. Only call this if you have
1848 * the right to do so, i.e. if you have succeeded in initialising before!
1849 * Returns zero if successful, and -EINVAL if the cpufreq_driver is
1850 * currently not initialised.
1852 int cpufreq_unregister_driver(struct cpufreq_driver *driver)
1854 unsigned long flags;
1856 cpufreq_debug_disable_ratelimit();
1858 if (!cpufreq_driver || (driver != cpufreq_driver)) {
1859 cpufreq_debug_enable_ratelimit();
1860 return -EINVAL;
1863 dprintk("unregistering driver %s\n", driver->name);
1865 sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
1866 unregister_hotcpu_notifier(&cpufreq_cpu_notifier);
1868 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1869 cpufreq_driver = NULL;
1870 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1872 return 0;
1874 EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
1876 static int __init cpufreq_core_init(void)
1878 int cpu;
1880 for_each_possible_cpu(cpu) {
1881 per_cpu(policy_cpu, cpu) = -1;
1882 init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
1884 return 0;
1887 core_initcall(cpufreq_core_init);