1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 char e1000_driver_name
[] = "e1000";
33 static char e1000_driver_string
[] = "Intel(R) PRO/1000 Network Driver";
34 #define DRV_VERSION "7.3.20-k3-NAPI"
35 const char e1000_driver_version
[] = DRV_VERSION
;
36 static const char e1000_copyright
[] = "Copyright (c) 1999-2006 Intel Corporation.";
38 /* e1000_pci_tbl - PCI Device ID Table
40 * Last entry must be all 0s
43 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
45 static struct pci_device_id e1000_pci_tbl
[] = {
46 INTEL_E1000_ETHERNET_DEVICE(0x1000),
47 INTEL_E1000_ETHERNET_DEVICE(0x1001),
48 INTEL_E1000_ETHERNET_DEVICE(0x1004),
49 INTEL_E1000_ETHERNET_DEVICE(0x1008),
50 INTEL_E1000_ETHERNET_DEVICE(0x1009),
51 INTEL_E1000_ETHERNET_DEVICE(0x100C),
52 INTEL_E1000_ETHERNET_DEVICE(0x100D),
53 INTEL_E1000_ETHERNET_DEVICE(0x100E),
54 INTEL_E1000_ETHERNET_DEVICE(0x100F),
55 INTEL_E1000_ETHERNET_DEVICE(0x1010),
56 INTEL_E1000_ETHERNET_DEVICE(0x1011),
57 INTEL_E1000_ETHERNET_DEVICE(0x1012),
58 INTEL_E1000_ETHERNET_DEVICE(0x1013),
59 INTEL_E1000_ETHERNET_DEVICE(0x1014),
60 INTEL_E1000_ETHERNET_DEVICE(0x1015),
61 INTEL_E1000_ETHERNET_DEVICE(0x1016),
62 INTEL_E1000_ETHERNET_DEVICE(0x1017),
63 INTEL_E1000_ETHERNET_DEVICE(0x1018),
64 INTEL_E1000_ETHERNET_DEVICE(0x1019),
65 INTEL_E1000_ETHERNET_DEVICE(0x101A),
66 INTEL_E1000_ETHERNET_DEVICE(0x101D),
67 INTEL_E1000_ETHERNET_DEVICE(0x101E),
68 INTEL_E1000_ETHERNET_DEVICE(0x1026),
69 INTEL_E1000_ETHERNET_DEVICE(0x1027),
70 INTEL_E1000_ETHERNET_DEVICE(0x1028),
71 INTEL_E1000_ETHERNET_DEVICE(0x1075),
72 INTEL_E1000_ETHERNET_DEVICE(0x1076),
73 INTEL_E1000_ETHERNET_DEVICE(0x1077),
74 INTEL_E1000_ETHERNET_DEVICE(0x1078),
75 INTEL_E1000_ETHERNET_DEVICE(0x1079),
76 INTEL_E1000_ETHERNET_DEVICE(0x107A),
77 INTEL_E1000_ETHERNET_DEVICE(0x107B),
78 INTEL_E1000_ETHERNET_DEVICE(0x107C),
79 INTEL_E1000_ETHERNET_DEVICE(0x108A),
80 INTEL_E1000_ETHERNET_DEVICE(0x1099),
81 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
82 /* required last entry */
86 MODULE_DEVICE_TABLE(pci
, e1000_pci_tbl
);
88 int e1000_up(struct e1000_adapter
*adapter
);
89 void e1000_down(struct e1000_adapter
*adapter
);
90 void e1000_reinit_locked(struct e1000_adapter
*adapter
);
91 void e1000_reset(struct e1000_adapter
*adapter
);
92 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u16 spddplx
);
93 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
);
94 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
);
95 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
);
96 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
);
97 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
98 struct e1000_tx_ring
*txdr
);
99 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
100 struct e1000_rx_ring
*rxdr
);
101 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
102 struct e1000_tx_ring
*tx_ring
);
103 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
104 struct e1000_rx_ring
*rx_ring
);
105 void e1000_update_stats(struct e1000_adapter
*adapter
);
107 static int e1000_init_module(void);
108 static void e1000_exit_module(void);
109 static int e1000_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
110 static void __devexit
e1000_remove(struct pci_dev
*pdev
);
111 static int e1000_alloc_queues(struct e1000_adapter
*adapter
);
112 static int e1000_sw_init(struct e1000_adapter
*adapter
);
113 static int e1000_open(struct net_device
*netdev
);
114 static int e1000_close(struct net_device
*netdev
);
115 static void e1000_configure_tx(struct e1000_adapter
*adapter
);
116 static void e1000_configure_rx(struct e1000_adapter
*adapter
);
117 static void e1000_setup_rctl(struct e1000_adapter
*adapter
);
118 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
);
119 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
);
120 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
121 struct e1000_tx_ring
*tx_ring
);
122 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
123 struct e1000_rx_ring
*rx_ring
);
124 static void e1000_set_rx_mode(struct net_device
*netdev
);
125 static void e1000_update_phy_info(unsigned long data
);
126 static void e1000_watchdog(unsigned long data
);
127 static void e1000_82547_tx_fifo_stall(unsigned long data
);
128 static int e1000_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
);
129 static struct net_device_stats
* e1000_get_stats(struct net_device
*netdev
);
130 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
);
131 static int e1000_set_mac(struct net_device
*netdev
, void *p
);
132 static irqreturn_t
e1000_intr(int irq
, void *data
);
133 static irqreturn_t
e1000_intr_msi(int irq
, void *data
);
134 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
135 struct e1000_tx_ring
*tx_ring
);
136 static int e1000_clean(struct napi_struct
*napi
, int budget
);
137 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
138 struct e1000_rx_ring
*rx_ring
,
139 int *work_done
, int work_to_do
);
140 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
141 struct e1000_rx_ring
*rx_ring
,
143 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
);
144 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
146 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
);
147 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
);
148 static void e1000_tx_timeout(struct net_device
*dev
);
149 static void e1000_reset_task(struct work_struct
*work
);
150 static void e1000_smartspeed(struct e1000_adapter
*adapter
);
151 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
152 struct sk_buff
*skb
);
154 static void e1000_vlan_rx_register(struct net_device
*netdev
, struct vlan_group
*grp
);
155 static void e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
);
156 static void e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
);
157 static void e1000_restore_vlan(struct e1000_adapter
*adapter
);
159 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
);
161 static int e1000_resume(struct pci_dev
*pdev
);
163 static void e1000_shutdown(struct pci_dev
*pdev
);
165 #ifdef CONFIG_NET_POLL_CONTROLLER
166 /* for netdump / net console */
167 static void e1000_netpoll (struct net_device
*netdev
);
170 #define COPYBREAK_DEFAULT 256
171 static unsigned int copybreak __read_mostly
= COPYBREAK_DEFAULT
;
172 module_param(copybreak
, uint
, 0644);
173 MODULE_PARM_DESC(copybreak
,
174 "Maximum size of packet that is copied to a new buffer on receive");
176 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
177 pci_channel_state_t state
);
178 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
);
179 static void e1000_io_resume(struct pci_dev
*pdev
);
181 static struct pci_error_handlers e1000_err_handler
= {
182 .error_detected
= e1000_io_error_detected
,
183 .slot_reset
= e1000_io_slot_reset
,
184 .resume
= e1000_io_resume
,
187 static struct pci_driver e1000_driver
= {
188 .name
= e1000_driver_name
,
189 .id_table
= e1000_pci_tbl
,
190 .probe
= e1000_probe
,
191 .remove
= __devexit_p(e1000_remove
),
193 /* Power Managment Hooks */
194 .suspend
= e1000_suspend
,
195 .resume
= e1000_resume
,
197 .shutdown
= e1000_shutdown
,
198 .err_handler
= &e1000_err_handler
201 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
202 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
203 MODULE_LICENSE("GPL");
204 MODULE_VERSION(DRV_VERSION
);
206 static int debug
= NETIF_MSG_DRV
| NETIF_MSG_PROBE
;
207 module_param(debug
, int, 0);
208 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
211 * e1000_init_module - Driver Registration Routine
213 * e1000_init_module is the first routine called when the driver is
214 * loaded. All it does is register with the PCI subsystem.
217 static int __init
e1000_init_module(void)
220 printk(KERN_INFO
"%s - version %s\n",
221 e1000_driver_string
, e1000_driver_version
);
223 printk(KERN_INFO
"%s\n", e1000_copyright
);
225 ret
= pci_register_driver(&e1000_driver
);
226 if (copybreak
!= COPYBREAK_DEFAULT
) {
228 printk(KERN_INFO
"e1000: copybreak disabled\n");
230 printk(KERN_INFO
"e1000: copybreak enabled for "
231 "packets <= %u bytes\n", copybreak
);
236 module_init(e1000_init_module
);
239 * e1000_exit_module - Driver Exit Cleanup Routine
241 * e1000_exit_module is called just before the driver is removed
245 static void __exit
e1000_exit_module(void)
247 pci_unregister_driver(&e1000_driver
);
250 module_exit(e1000_exit_module
);
252 static int e1000_request_irq(struct e1000_adapter
*adapter
)
254 struct e1000_hw
*hw
= &adapter
->hw
;
255 struct net_device
*netdev
= adapter
->netdev
;
256 irq_handler_t handler
= e1000_intr
;
257 int irq_flags
= IRQF_SHARED
;
260 if (hw
->mac_type
>= e1000_82571
) {
261 adapter
->have_msi
= !pci_enable_msi(adapter
->pdev
);
262 if (adapter
->have_msi
) {
263 handler
= e1000_intr_msi
;
268 err
= request_irq(adapter
->pdev
->irq
, handler
, irq_flags
, netdev
->name
,
271 if (adapter
->have_msi
)
272 pci_disable_msi(adapter
->pdev
);
274 "Unable to allocate interrupt Error: %d\n", err
);
280 static void e1000_free_irq(struct e1000_adapter
*adapter
)
282 struct net_device
*netdev
= adapter
->netdev
;
284 free_irq(adapter
->pdev
->irq
, netdev
);
286 if (adapter
->have_msi
)
287 pci_disable_msi(adapter
->pdev
);
291 * e1000_irq_disable - Mask off interrupt generation on the NIC
292 * @adapter: board private structure
295 static void e1000_irq_disable(struct e1000_adapter
*adapter
)
297 struct e1000_hw
*hw
= &adapter
->hw
;
301 synchronize_irq(adapter
->pdev
->irq
);
305 * e1000_irq_enable - Enable default interrupt generation settings
306 * @adapter: board private structure
309 static void e1000_irq_enable(struct e1000_adapter
*adapter
)
311 struct e1000_hw
*hw
= &adapter
->hw
;
313 ew32(IMS
, IMS_ENABLE_MASK
);
317 static void e1000_update_mng_vlan(struct e1000_adapter
*adapter
)
319 struct e1000_hw
*hw
= &adapter
->hw
;
320 struct net_device
*netdev
= adapter
->netdev
;
321 u16 vid
= hw
->mng_cookie
.vlan_id
;
322 u16 old_vid
= adapter
->mng_vlan_id
;
323 if (adapter
->vlgrp
) {
324 if (!vlan_group_get_device(adapter
->vlgrp
, vid
)) {
325 if (hw
->mng_cookie
.status
&
326 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) {
327 e1000_vlan_rx_add_vid(netdev
, vid
);
328 adapter
->mng_vlan_id
= vid
;
330 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
332 if ((old_vid
!= (u16
)E1000_MNG_VLAN_NONE
) &&
334 !vlan_group_get_device(adapter
->vlgrp
, old_vid
))
335 e1000_vlan_rx_kill_vid(netdev
, old_vid
);
337 adapter
->mng_vlan_id
= vid
;
342 * e1000_release_hw_control - release control of the h/w to f/w
343 * @adapter: address of board private structure
345 * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
346 * For ASF and Pass Through versions of f/w this means that the
347 * driver is no longer loaded. For AMT version (only with 82573) i
348 * of the f/w this means that the network i/f is closed.
352 static void e1000_release_hw_control(struct e1000_adapter
*adapter
)
356 struct e1000_hw
*hw
= &adapter
->hw
;
358 /* Let firmware taken over control of h/w */
359 switch (hw
->mac_type
) {
362 ew32(SWSM
, swsm
& ~E1000_SWSM_DRV_LOAD
);
366 case e1000_80003es2lan
:
368 ctrl_ext
= er32(CTRL_EXT
);
369 ew32(CTRL_EXT
, ctrl_ext
& ~E1000_CTRL_EXT_DRV_LOAD
);
377 * e1000_get_hw_control - get control of the h/w from f/w
378 * @adapter: address of board private structure
380 * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
381 * For ASF and Pass Through versions of f/w this means that
382 * the driver is loaded. For AMT version (only with 82573)
383 * of the f/w this means that the network i/f is open.
387 static void e1000_get_hw_control(struct e1000_adapter
*adapter
)
391 struct e1000_hw
*hw
= &adapter
->hw
;
393 /* Let firmware know the driver has taken over */
394 switch (hw
->mac_type
) {
397 ew32(SWSM
, swsm
| E1000_SWSM_DRV_LOAD
);
401 case e1000_80003es2lan
:
403 ctrl_ext
= er32(CTRL_EXT
);
404 ew32(CTRL_EXT
, ctrl_ext
| E1000_CTRL_EXT_DRV_LOAD
);
411 static void e1000_init_manageability(struct e1000_adapter
*adapter
)
413 struct e1000_hw
*hw
= &adapter
->hw
;
415 if (adapter
->en_mng_pt
) {
416 u32 manc
= er32(MANC
);
418 /* disable hardware interception of ARP */
419 manc
&= ~(E1000_MANC_ARP_EN
);
421 /* enable receiving management packets to the host */
422 /* this will probably generate destination unreachable messages
423 * from the host OS, but the packets will be handled on SMBUS */
424 if (hw
->has_manc2h
) {
425 u32 manc2h
= er32(MANC2H
);
427 manc
|= E1000_MANC_EN_MNG2HOST
;
428 #define E1000_MNG2HOST_PORT_623 (1 << 5)
429 #define E1000_MNG2HOST_PORT_664 (1 << 6)
430 manc2h
|= E1000_MNG2HOST_PORT_623
;
431 manc2h
|= E1000_MNG2HOST_PORT_664
;
432 ew32(MANC2H
, manc2h
);
439 static void e1000_release_manageability(struct e1000_adapter
*adapter
)
441 struct e1000_hw
*hw
= &adapter
->hw
;
443 if (adapter
->en_mng_pt
) {
444 u32 manc
= er32(MANC
);
446 /* re-enable hardware interception of ARP */
447 manc
|= E1000_MANC_ARP_EN
;
450 manc
&= ~E1000_MANC_EN_MNG2HOST
;
452 /* don't explicitly have to mess with MANC2H since
453 * MANC has an enable disable that gates MANC2H */
460 * e1000_configure - configure the hardware for RX and TX
461 * @adapter = private board structure
463 static void e1000_configure(struct e1000_adapter
*adapter
)
465 struct net_device
*netdev
= adapter
->netdev
;
468 e1000_set_rx_mode(netdev
);
470 e1000_restore_vlan(adapter
);
471 e1000_init_manageability(adapter
);
473 e1000_configure_tx(adapter
);
474 e1000_setup_rctl(adapter
);
475 e1000_configure_rx(adapter
);
476 /* call E1000_DESC_UNUSED which always leaves
477 * at least 1 descriptor unused to make sure
478 * next_to_use != next_to_clean */
479 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
480 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[i
];
481 adapter
->alloc_rx_buf(adapter
, ring
,
482 E1000_DESC_UNUSED(ring
));
485 adapter
->tx_queue_len
= netdev
->tx_queue_len
;
488 int e1000_up(struct e1000_adapter
*adapter
)
490 struct e1000_hw
*hw
= &adapter
->hw
;
492 /* hardware has been reset, we need to reload some things */
493 e1000_configure(adapter
);
495 clear_bit(__E1000_DOWN
, &adapter
->flags
);
497 napi_enable(&adapter
->napi
);
499 e1000_irq_enable(adapter
);
501 /* fire a link change interrupt to start the watchdog */
502 ew32(ICS
, E1000_ICS_LSC
);
507 * e1000_power_up_phy - restore link in case the phy was powered down
508 * @adapter: address of board private structure
510 * The phy may be powered down to save power and turn off link when the
511 * driver is unloaded and wake on lan is not enabled (among others)
512 * *** this routine MUST be followed by a call to e1000_reset ***
516 void e1000_power_up_phy(struct e1000_adapter
*adapter
)
518 struct e1000_hw
*hw
= &adapter
->hw
;
521 /* Just clear the power down bit to wake the phy back up */
522 if (hw
->media_type
== e1000_media_type_copper
) {
523 /* according to the manual, the phy will retain its
524 * settings across a power-down/up cycle */
525 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
526 mii_reg
&= ~MII_CR_POWER_DOWN
;
527 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
531 static void e1000_power_down_phy(struct e1000_adapter
*adapter
)
533 struct e1000_hw
*hw
= &adapter
->hw
;
535 /* Power down the PHY so no link is implied when interface is down *
536 * The PHY cannot be powered down if any of the following is true *
539 * (c) SoL/IDER session is active */
540 if (!adapter
->wol
&& hw
->mac_type
>= e1000_82540
&&
541 hw
->media_type
== e1000_media_type_copper
) {
544 switch (hw
->mac_type
) {
547 case e1000_82545_rev_3
:
549 case e1000_82546_rev_3
:
551 case e1000_82541_rev_2
:
553 case e1000_82547_rev_2
:
554 if (er32(MANC
) & E1000_MANC_SMBUS_EN
)
560 case e1000_80003es2lan
:
562 if (e1000_check_mng_mode(hw
) ||
563 e1000_check_phy_reset_block(hw
))
569 e1000_read_phy_reg(hw
, PHY_CTRL
, &mii_reg
);
570 mii_reg
|= MII_CR_POWER_DOWN
;
571 e1000_write_phy_reg(hw
, PHY_CTRL
, mii_reg
);
578 void e1000_down(struct e1000_adapter
*adapter
)
580 struct net_device
*netdev
= adapter
->netdev
;
582 /* signal that we're down so the interrupt handler does not
583 * reschedule our watchdog timer */
584 set_bit(__E1000_DOWN
, &adapter
->flags
);
586 napi_disable(&adapter
->napi
);
588 e1000_irq_disable(adapter
);
590 del_timer_sync(&adapter
->tx_fifo_stall_timer
);
591 del_timer_sync(&adapter
->watchdog_timer
);
592 del_timer_sync(&adapter
->phy_info_timer
);
594 netdev
->tx_queue_len
= adapter
->tx_queue_len
;
595 adapter
->link_speed
= 0;
596 adapter
->link_duplex
= 0;
597 netif_carrier_off(netdev
);
598 netif_stop_queue(netdev
);
600 e1000_reset(adapter
);
601 e1000_clean_all_tx_rings(adapter
);
602 e1000_clean_all_rx_rings(adapter
);
605 void e1000_reinit_locked(struct e1000_adapter
*adapter
)
607 WARN_ON(in_interrupt());
608 while (test_and_set_bit(__E1000_RESETTING
, &adapter
->flags
))
612 clear_bit(__E1000_RESETTING
, &adapter
->flags
);
615 void e1000_reset(struct e1000_adapter
*adapter
)
617 struct e1000_hw
*hw
= &adapter
->hw
;
618 u32 pba
= 0, tx_space
, min_tx_space
, min_rx_space
;
619 u16 fc_high_water_mark
= E1000_FC_HIGH_DIFF
;
620 bool legacy_pba_adjust
= false;
622 /* Repartition Pba for greater than 9k mtu
623 * To take effect CTRL.RST is required.
626 switch (hw
->mac_type
) {
627 case e1000_82542_rev2_0
:
628 case e1000_82542_rev2_1
:
633 case e1000_82541_rev_2
:
634 legacy_pba_adjust
= true;
638 case e1000_82545_rev_3
:
640 case e1000_82546_rev_3
:
644 case e1000_82547_rev_2
:
645 legacy_pba_adjust
= true;
650 case e1000_80003es2lan
:
658 case e1000_undefined
:
663 if (legacy_pba_adjust
) {
664 if (adapter
->netdev
->mtu
> E1000_RXBUFFER_8192
)
665 pba
-= 8; /* allocate more FIFO for Tx */
667 if (hw
->mac_type
== e1000_82547
) {
668 adapter
->tx_fifo_head
= 0;
669 adapter
->tx_head_addr
= pba
<< E1000_TX_HEAD_ADDR_SHIFT
;
670 adapter
->tx_fifo_size
=
671 (E1000_PBA_40K
- pba
) << E1000_PBA_BYTES_SHIFT
;
672 atomic_set(&adapter
->tx_fifo_stall
, 0);
674 } else if (hw
->max_frame_size
> MAXIMUM_ETHERNET_FRAME_SIZE
) {
675 /* adjust PBA for jumbo frames */
678 /* To maintain wire speed transmits, the Tx FIFO should be
679 * large enough to accomodate two full transmit packets,
680 * rounded up to the next 1KB and expressed in KB. Likewise,
681 * the Rx FIFO should be large enough to accomodate at least
682 * one full receive packet and is similarly rounded up and
683 * expressed in KB. */
685 /* upper 16 bits has Tx packet buffer allocation size in KB */
686 tx_space
= pba
>> 16;
687 /* lower 16 bits has Rx packet buffer allocation size in KB */
689 /* don't include ethernet FCS because hardware appends/strips */
690 min_rx_space
= adapter
->netdev
->mtu
+ ENET_HEADER_SIZE
+
692 min_tx_space
= min_rx_space
;
694 min_tx_space
= ALIGN(min_tx_space
, 1024);
696 min_rx_space
= ALIGN(min_rx_space
, 1024);
699 /* If current Tx allocation is less than the min Tx FIFO size,
700 * and the min Tx FIFO size is less than the current Rx FIFO
701 * allocation, take space away from current Rx allocation */
702 if (tx_space
< min_tx_space
&&
703 ((min_tx_space
- tx_space
) < pba
)) {
704 pba
= pba
- (min_tx_space
- tx_space
);
706 /* PCI/PCIx hardware has PBA alignment constraints */
707 switch (hw
->mac_type
) {
708 case e1000_82545
... e1000_82546_rev_3
:
709 pba
&= ~(E1000_PBA_8K
- 1);
715 /* if short on rx space, rx wins and must trump tx
716 * adjustment or use Early Receive if available */
717 if (pba
< min_rx_space
) {
718 switch (hw
->mac_type
) {
720 /* ERT enabled in e1000_configure_rx */
732 /* flow control settings */
733 /* Set the FC high water mark to 90% of the FIFO size.
734 * Required to clear last 3 LSB */
735 fc_high_water_mark
= ((pba
* 9216)/10) & 0xFFF8;
736 /* We can't use 90% on small FIFOs because the remainder
737 * would be less than 1 full frame. In this case, we size
738 * it to allow at least a full frame above the high water
740 if (pba
< E1000_PBA_16K
)
741 fc_high_water_mark
= (pba
* 1024) - 1600;
743 hw
->fc_high_water
= fc_high_water_mark
;
744 hw
->fc_low_water
= fc_high_water_mark
- 8;
745 if (hw
->mac_type
== e1000_80003es2lan
)
746 hw
->fc_pause_time
= 0xFFFF;
748 hw
->fc_pause_time
= E1000_FC_PAUSE_TIME
;
750 hw
->fc
= hw
->original_fc
;
752 /* Allow time for pending master requests to run */
754 if (hw
->mac_type
>= e1000_82544
)
757 if (e1000_init_hw(hw
))
758 DPRINTK(PROBE
, ERR
, "Hardware Error\n");
759 e1000_update_mng_vlan(adapter
);
761 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
762 if (hw
->mac_type
>= e1000_82544
&&
763 hw
->mac_type
<= e1000_82547_rev_2
&&
765 hw
->autoneg_advertised
== ADVERTISE_1000_FULL
) {
766 u32 ctrl
= er32(CTRL
);
767 /* clear phy power management bit if we are in gig only mode,
768 * which if enabled will attempt negotiation to 100Mb, which
769 * can cause a loss of link at power off or driver unload */
770 ctrl
&= ~E1000_CTRL_SWDPIN3
;
774 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
775 ew32(VET
, ETHERNET_IEEE_VLAN_TYPE
);
777 e1000_reset_adaptive(hw
);
778 e1000_phy_get_info(hw
, &adapter
->phy_info
);
780 if (!adapter
->smart_power_down
&&
781 (hw
->mac_type
== e1000_82571
||
782 hw
->mac_type
== e1000_82572
)) {
784 /* speed up time to link by disabling smart power down, ignore
785 * the return value of this function because there is nothing
786 * different we would do if it failed */
787 e1000_read_phy_reg(hw
, IGP02E1000_PHY_POWER_MGMT
,
789 phy_data
&= ~IGP02E1000_PM_SPD
;
790 e1000_write_phy_reg(hw
, IGP02E1000_PHY_POWER_MGMT
,
794 e1000_release_manageability(adapter
);
798 * Dump the eeprom for users having checksum issues
800 static void e1000_dump_eeprom(struct e1000_adapter
*adapter
)
802 struct net_device
*netdev
= adapter
->netdev
;
803 struct ethtool_eeprom eeprom
;
804 const struct ethtool_ops
*ops
= netdev
->ethtool_ops
;
807 u16 csum_old
, csum_new
= 0;
809 eeprom
.len
= ops
->get_eeprom_len(netdev
);
812 data
= kmalloc(eeprom
.len
, GFP_KERNEL
);
814 printk(KERN_ERR
"Unable to allocate memory to dump EEPROM"
819 ops
->get_eeprom(netdev
, &eeprom
, data
);
821 csum_old
= (data
[EEPROM_CHECKSUM_REG
* 2]) +
822 (data
[EEPROM_CHECKSUM_REG
* 2 + 1] << 8);
823 for (i
= 0; i
< EEPROM_CHECKSUM_REG
* 2; i
+= 2)
824 csum_new
+= data
[i
] + (data
[i
+ 1] << 8);
825 csum_new
= EEPROM_SUM
- csum_new
;
827 printk(KERN_ERR
"/*********************/\n");
828 printk(KERN_ERR
"Current EEPROM Checksum : 0x%04x\n", csum_old
);
829 printk(KERN_ERR
"Calculated : 0x%04x\n", csum_new
);
831 printk(KERN_ERR
"Offset Values\n");
832 printk(KERN_ERR
"======== ======\n");
833 print_hex_dump(KERN_ERR
, "", DUMP_PREFIX_OFFSET
, 16, 1, data
, 128, 0);
835 printk(KERN_ERR
"Include this output when contacting your support "
837 printk(KERN_ERR
"This is not a software error! Something bad "
838 "happened to your hardware or\n");
839 printk(KERN_ERR
"EEPROM image. Ignoring this "
840 "problem could result in further problems,\n");
841 printk(KERN_ERR
"possibly loss of data, corruption or system hangs!\n");
842 printk(KERN_ERR
"The MAC Address will be reset to 00:00:00:00:00:00, "
843 "which is invalid\n");
844 printk(KERN_ERR
"and requires you to set the proper MAC "
845 "address manually before continuing\n");
846 printk(KERN_ERR
"to enable this network device.\n");
847 printk(KERN_ERR
"Please inspect the EEPROM dump and report the issue "
848 "to your hardware vendor\n");
849 printk(KERN_ERR
"or Intel Customer Support.\n");
850 printk(KERN_ERR
"/*********************/\n");
856 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
857 * @pdev: PCI device information struct
859 * Return true if an adapter needs ioport resources
861 static int e1000_is_need_ioport(struct pci_dev
*pdev
)
863 switch (pdev
->device
) {
864 case E1000_DEV_ID_82540EM
:
865 case E1000_DEV_ID_82540EM_LOM
:
866 case E1000_DEV_ID_82540EP
:
867 case E1000_DEV_ID_82540EP_LOM
:
868 case E1000_DEV_ID_82540EP_LP
:
869 case E1000_DEV_ID_82541EI
:
870 case E1000_DEV_ID_82541EI_MOBILE
:
871 case E1000_DEV_ID_82541ER
:
872 case E1000_DEV_ID_82541ER_LOM
:
873 case E1000_DEV_ID_82541GI
:
874 case E1000_DEV_ID_82541GI_LF
:
875 case E1000_DEV_ID_82541GI_MOBILE
:
876 case E1000_DEV_ID_82544EI_COPPER
:
877 case E1000_DEV_ID_82544EI_FIBER
:
878 case E1000_DEV_ID_82544GC_COPPER
:
879 case E1000_DEV_ID_82544GC_LOM
:
880 case E1000_DEV_ID_82545EM_COPPER
:
881 case E1000_DEV_ID_82545EM_FIBER
:
882 case E1000_DEV_ID_82546EB_COPPER
:
883 case E1000_DEV_ID_82546EB_FIBER
:
884 case E1000_DEV_ID_82546EB_QUAD_COPPER
:
892 * e1000_probe - Device Initialization Routine
893 * @pdev: PCI device information struct
894 * @ent: entry in e1000_pci_tbl
896 * Returns 0 on success, negative on failure
898 * e1000_probe initializes an adapter identified by a pci_dev structure.
899 * The OS initialization, configuring of the adapter private structure,
900 * and a hardware reset occur.
902 static int __devinit
e1000_probe(struct pci_dev
*pdev
,
903 const struct pci_device_id
*ent
)
905 struct net_device
*netdev
;
906 struct e1000_adapter
*adapter
;
909 static int cards_found
= 0;
910 static int global_quad_port_a
= 0; /* global ksp3 port a indication */
911 int i
, err
, pci_using_dac
;
913 u16 eeprom_apme_mask
= E1000_EEPROM_APME
;
914 int bars
, need_ioport
;
916 /* do not allocate ioport bars when not needed */
917 need_ioport
= e1000_is_need_ioport(pdev
);
919 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
| IORESOURCE_IO
);
920 err
= pci_enable_device(pdev
);
922 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
923 err
= pci_enable_device(pdev
);
928 if (!pci_set_dma_mask(pdev
, DMA_64BIT_MASK
) &&
929 !pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
)) {
932 err
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
934 err
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
936 E1000_ERR("No usable DMA configuration, "
944 err
= pci_request_selected_regions(pdev
, bars
, e1000_driver_name
);
948 pci_set_master(pdev
);
951 netdev
= alloc_etherdev(sizeof(struct e1000_adapter
));
953 goto err_alloc_etherdev
;
955 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
957 pci_set_drvdata(pdev
, netdev
);
958 adapter
= netdev_priv(netdev
);
959 adapter
->netdev
= netdev
;
960 adapter
->pdev
= pdev
;
961 adapter
->msg_enable
= (1 << debug
) - 1;
962 adapter
->bars
= bars
;
963 adapter
->need_ioport
= need_ioport
;
969 hw
->hw_addr
= pci_ioremap_bar(pdev
, BAR_0
);
973 if (adapter
->need_ioport
) {
974 for (i
= BAR_1
; i
<= BAR_5
; i
++) {
975 if (pci_resource_len(pdev
, i
) == 0)
977 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
978 hw
->io_base
= pci_resource_start(pdev
, i
);
984 netdev
->open
= &e1000_open
;
985 netdev
->stop
= &e1000_close
;
986 netdev
->hard_start_xmit
= &e1000_xmit_frame
;
987 netdev
->get_stats
= &e1000_get_stats
;
988 netdev
->set_rx_mode
= &e1000_set_rx_mode
;
989 netdev
->set_mac_address
= &e1000_set_mac
;
990 netdev
->change_mtu
= &e1000_change_mtu
;
991 netdev
->do_ioctl
= &e1000_ioctl
;
992 e1000_set_ethtool_ops(netdev
);
993 netdev
->tx_timeout
= &e1000_tx_timeout
;
994 netdev
->watchdog_timeo
= 5 * HZ
;
995 netif_napi_add(netdev
, &adapter
->napi
, e1000_clean
, 64);
996 netdev
->vlan_rx_register
= e1000_vlan_rx_register
;
997 netdev
->vlan_rx_add_vid
= e1000_vlan_rx_add_vid
;
998 netdev
->vlan_rx_kill_vid
= e1000_vlan_rx_kill_vid
;
999 #ifdef CONFIG_NET_POLL_CONTROLLER
1000 netdev
->poll_controller
= e1000_netpoll
;
1002 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
1004 adapter
->bd_number
= cards_found
;
1006 /* setup the private structure */
1008 err
= e1000_sw_init(adapter
);
1013 /* Flash BAR mapping must happen after e1000_sw_init
1014 * because it depends on mac_type */
1015 if ((hw
->mac_type
== e1000_ich8lan
) &&
1016 (pci_resource_flags(pdev
, 1) & IORESOURCE_MEM
)) {
1017 hw
->flash_address
= pci_ioremap_bar(pdev
, 1);
1018 if (!hw
->flash_address
)
1022 if (e1000_check_phy_reset_block(hw
))
1023 DPRINTK(PROBE
, INFO
, "PHY reset is blocked due to SOL/IDER session.\n");
1025 if (hw
->mac_type
>= e1000_82543
) {
1026 netdev
->features
= NETIF_F_SG
|
1028 NETIF_F_HW_VLAN_TX
|
1029 NETIF_F_HW_VLAN_RX
|
1030 NETIF_F_HW_VLAN_FILTER
;
1031 if (hw
->mac_type
== e1000_ich8lan
)
1032 netdev
->features
&= ~NETIF_F_HW_VLAN_FILTER
;
1035 if ((hw
->mac_type
>= e1000_82544
) &&
1036 (hw
->mac_type
!= e1000_82547
))
1037 netdev
->features
|= NETIF_F_TSO
;
1039 if (hw
->mac_type
> e1000_82547_rev_2
)
1040 netdev
->features
|= NETIF_F_TSO6
;
1042 netdev
->features
|= NETIF_F_HIGHDMA
;
1044 netdev
->features
|= NETIF_F_LLTX
;
1046 netdev
->vlan_features
|= NETIF_F_TSO
;
1047 netdev
->vlan_features
|= NETIF_F_TSO6
;
1048 netdev
->vlan_features
|= NETIF_F_HW_CSUM
;
1049 netdev
->vlan_features
|= NETIF_F_SG
;
1051 adapter
->en_mng_pt
= e1000_enable_mng_pass_thru(hw
);
1053 /* initialize eeprom parameters */
1054 if (e1000_init_eeprom_params(hw
)) {
1055 E1000_ERR("EEPROM initialization failed\n");
1059 /* before reading the EEPROM, reset the controller to
1060 * put the device in a known good starting state */
1064 /* make sure the EEPROM is good */
1065 if (e1000_validate_eeprom_checksum(hw
) < 0) {
1066 DPRINTK(PROBE
, ERR
, "The EEPROM Checksum Is Not Valid\n");
1067 e1000_dump_eeprom(adapter
);
1069 * set MAC address to all zeroes to invalidate and temporary
1070 * disable this device for the user. This blocks regular
1071 * traffic while still permitting ethtool ioctls from reaching
1072 * the hardware as well as allowing the user to run the
1073 * interface after manually setting a hw addr using
1076 memset(hw
->mac_addr
, 0, netdev
->addr_len
);
1078 /* copy the MAC address out of the EEPROM */
1079 if (e1000_read_mac_addr(hw
))
1080 DPRINTK(PROBE
, ERR
, "EEPROM Read Error\n");
1082 /* don't block initalization here due to bad MAC address */
1083 memcpy(netdev
->dev_addr
, hw
->mac_addr
, netdev
->addr_len
);
1084 memcpy(netdev
->perm_addr
, hw
->mac_addr
, netdev
->addr_len
);
1086 if (!is_valid_ether_addr(netdev
->perm_addr
))
1087 DPRINTK(PROBE
, ERR
, "Invalid MAC Address\n");
1089 e1000_get_bus_info(hw
);
1091 init_timer(&adapter
->tx_fifo_stall_timer
);
1092 adapter
->tx_fifo_stall_timer
.function
= &e1000_82547_tx_fifo_stall
;
1093 adapter
->tx_fifo_stall_timer
.data
= (unsigned long)adapter
;
1095 init_timer(&adapter
->watchdog_timer
);
1096 adapter
->watchdog_timer
.function
= &e1000_watchdog
;
1097 adapter
->watchdog_timer
.data
= (unsigned long) adapter
;
1099 init_timer(&adapter
->phy_info_timer
);
1100 adapter
->phy_info_timer
.function
= &e1000_update_phy_info
;
1101 adapter
->phy_info_timer
.data
= (unsigned long)adapter
;
1103 INIT_WORK(&adapter
->reset_task
, e1000_reset_task
);
1105 e1000_check_options(adapter
);
1107 /* Initial Wake on LAN setting
1108 * If APM wake is enabled in the EEPROM,
1109 * enable the ACPI Magic Packet filter
1112 switch (hw
->mac_type
) {
1113 case e1000_82542_rev2_0
:
1114 case e1000_82542_rev2_1
:
1118 e1000_read_eeprom(hw
,
1119 EEPROM_INIT_CONTROL2_REG
, 1, &eeprom_data
);
1120 eeprom_apme_mask
= E1000_EEPROM_82544_APM
;
1123 e1000_read_eeprom(hw
,
1124 EEPROM_INIT_CONTROL1_REG
, 1, &eeprom_data
);
1125 eeprom_apme_mask
= E1000_EEPROM_ICH8_APME
;
1128 case e1000_82546_rev_3
:
1130 case e1000_80003es2lan
:
1131 if (er32(STATUS
) & E1000_STATUS_FUNC_1
){
1132 e1000_read_eeprom(hw
,
1133 EEPROM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
1138 e1000_read_eeprom(hw
,
1139 EEPROM_INIT_CONTROL3_PORT_A
, 1, &eeprom_data
);
1142 if (eeprom_data
& eeprom_apme_mask
)
1143 adapter
->eeprom_wol
|= E1000_WUFC_MAG
;
1145 /* now that we have the eeprom settings, apply the special cases
1146 * where the eeprom may be wrong or the board simply won't support
1147 * wake on lan on a particular port */
1148 switch (pdev
->device
) {
1149 case E1000_DEV_ID_82546GB_PCIE
:
1150 adapter
->eeprom_wol
= 0;
1152 case E1000_DEV_ID_82546EB_FIBER
:
1153 case E1000_DEV_ID_82546GB_FIBER
:
1154 case E1000_DEV_ID_82571EB_FIBER
:
1155 /* Wake events only supported on port A for dual fiber
1156 * regardless of eeprom setting */
1157 if (er32(STATUS
) & E1000_STATUS_FUNC_1
)
1158 adapter
->eeprom_wol
= 0;
1160 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3
:
1161 case E1000_DEV_ID_82571EB_QUAD_COPPER
:
1162 case E1000_DEV_ID_82571EB_QUAD_FIBER
:
1163 case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE
:
1164 case E1000_DEV_ID_82571PT_QUAD_COPPER
:
1165 /* if quad port adapter, disable WoL on all but port A */
1166 if (global_quad_port_a
!= 0)
1167 adapter
->eeprom_wol
= 0;
1169 adapter
->quad_port_a
= 1;
1170 /* Reset for multiple quad port adapters */
1171 if (++global_quad_port_a
== 4)
1172 global_quad_port_a
= 0;
1176 /* initialize the wol settings based on the eeprom settings */
1177 adapter
->wol
= adapter
->eeprom_wol
;
1179 /* print bus type/speed/width info */
1180 DPRINTK(PROBE
, INFO
, "(PCI%s:%s:%s) ",
1181 ((hw
->bus_type
== e1000_bus_type_pcix
) ? "-X" :
1182 (hw
->bus_type
== e1000_bus_type_pci_express
? " Express":"")),
1183 ((hw
->bus_speed
== e1000_bus_speed_2500
) ? "2.5Gb/s" :
1184 (hw
->bus_speed
== e1000_bus_speed_133
) ? "133MHz" :
1185 (hw
->bus_speed
== e1000_bus_speed_120
) ? "120MHz" :
1186 (hw
->bus_speed
== e1000_bus_speed_100
) ? "100MHz" :
1187 (hw
->bus_speed
== e1000_bus_speed_66
) ? "66MHz" : "33MHz"),
1188 ((hw
->bus_width
== e1000_bus_width_64
) ? "64-bit" :
1189 (hw
->bus_width
== e1000_bus_width_pciex_4
) ? "Width x4" :
1190 (hw
->bus_width
== e1000_bus_width_pciex_1
) ? "Width x1" :
1193 printk("%pM\n", netdev
->dev_addr
);
1195 if (hw
->bus_type
== e1000_bus_type_pci_express
) {
1196 DPRINTK(PROBE
, WARNING
, "This device (id %04x:%04x) will no "
1197 "longer be supported by this driver in the future.\n",
1198 pdev
->vendor
, pdev
->device
);
1199 DPRINTK(PROBE
, WARNING
, "please use the \"e1000e\" "
1200 "driver instead.\n");
1203 /* reset the hardware with the new settings */
1204 e1000_reset(adapter
);
1206 /* If the controller is 82573 and f/w is AMT, do not set
1207 * DRV_LOAD until the interface is up. For all other cases,
1208 * let the f/w know that the h/w is now under the control
1210 if (hw
->mac_type
!= e1000_82573
||
1211 !e1000_check_mng_mode(hw
))
1212 e1000_get_hw_control(adapter
);
1214 /* tell the stack to leave us alone until e1000_open() is called */
1215 netif_carrier_off(netdev
);
1216 netif_stop_queue(netdev
);
1218 strcpy(netdev
->name
, "eth%d");
1219 err
= register_netdev(netdev
);
1223 DPRINTK(PROBE
, INFO
, "Intel(R) PRO/1000 Network Connection\n");
1229 e1000_release_hw_control(adapter
);
1231 if (!e1000_check_phy_reset_block(hw
))
1232 e1000_phy_hw_reset(hw
);
1234 if (hw
->flash_address
)
1235 iounmap(hw
->flash_address
);
1237 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1238 dev_put(&adapter
->polling_netdev
[i
]);
1240 kfree(adapter
->tx_ring
);
1241 kfree(adapter
->rx_ring
);
1242 kfree(adapter
->polling_netdev
);
1244 iounmap(hw
->hw_addr
);
1246 free_netdev(netdev
);
1248 pci_release_selected_regions(pdev
, bars
);
1251 pci_disable_device(pdev
);
1256 * e1000_remove - Device Removal Routine
1257 * @pdev: PCI device information struct
1259 * e1000_remove is called by the PCI subsystem to alert the driver
1260 * that it should release a PCI device. The could be caused by a
1261 * Hot-Plug event, or because the driver is going to be removed from
1265 static void __devexit
e1000_remove(struct pci_dev
*pdev
)
1267 struct net_device
*netdev
= pci_get_drvdata(pdev
);
1268 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1269 struct e1000_hw
*hw
= &adapter
->hw
;
1272 cancel_work_sync(&adapter
->reset_task
);
1274 e1000_release_manageability(adapter
);
1276 /* Release control of h/w to f/w. If f/w is AMT enabled, this
1277 * would have already happened in close and is redundant. */
1278 e1000_release_hw_control(adapter
);
1280 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1281 dev_put(&adapter
->polling_netdev
[i
]);
1283 unregister_netdev(netdev
);
1285 if (!e1000_check_phy_reset_block(hw
))
1286 e1000_phy_hw_reset(hw
);
1288 kfree(adapter
->tx_ring
);
1289 kfree(adapter
->rx_ring
);
1290 kfree(adapter
->polling_netdev
);
1292 iounmap(hw
->hw_addr
);
1293 if (hw
->flash_address
)
1294 iounmap(hw
->flash_address
);
1295 pci_release_selected_regions(pdev
, adapter
->bars
);
1297 free_netdev(netdev
);
1299 pci_disable_device(pdev
);
1303 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1304 * @adapter: board private structure to initialize
1306 * e1000_sw_init initializes the Adapter private data structure.
1307 * Fields are initialized based on PCI device information and
1308 * OS network device settings (MTU size).
1311 static int __devinit
e1000_sw_init(struct e1000_adapter
*adapter
)
1313 struct e1000_hw
*hw
= &adapter
->hw
;
1314 struct net_device
*netdev
= adapter
->netdev
;
1315 struct pci_dev
*pdev
= adapter
->pdev
;
1318 /* PCI config space info */
1320 hw
->vendor_id
= pdev
->vendor
;
1321 hw
->device_id
= pdev
->device
;
1322 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
1323 hw
->subsystem_id
= pdev
->subsystem_device
;
1324 hw
->revision_id
= pdev
->revision
;
1326 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->pci_cmd_word
);
1328 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
1329 hw
->max_frame_size
= netdev
->mtu
+
1330 ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
1331 hw
->min_frame_size
= MINIMUM_ETHERNET_FRAME_SIZE
;
1333 /* identify the MAC */
1335 if (e1000_set_mac_type(hw
)) {
1336 DPRINTK(PROBE
, ERR
, "Unknown MAC Type\n");
1340 switch (hw
->mac_type
) {
1345 case e1000_82541_rev_2
:
1346 case e1000_82547_rev_2
:
1347 hw
->phy_init_script
= 1;
1351 e1000_set_media_type(hw
);
1353 hw
->wait_autoneg_complete
= false;
1354 hw
->tbi_compatibility_en
= true;
1355 hw
->adaptive_ifs
= true;
1357 /* Copper options */
1359 if (hw
->media_type
== e1000_media_type_copper
) {
1360 hw
->mdix
= AUTO_ALL_MODES
;
1361 hw
->disable_polarity_correction
= false;
1362 hw
->master_slave
= E1000_MASTER_SLAVE
;
1365 adapter
->num_tx_queues
= 1;
1366 adapter
->num_rx_queues
= 1;
1368 if (e1000_alloc_queues(adapter
)) {
1369 DPRINTK(PROBE
, ERR
, "Unable to allocate memory for queues\n");
1373 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1374 adapter
->polling_netdev
[i
].priv
= adapter
;
1375 dev_hold(&adapter
->polling_netdev
[i
]);
1376 set_bit(__LINK_STATE_START
, &adapter
->polling_netdev
[i
].state
);
1378 spin_lock_init(&adapter
->tx_queue_lock
);
1380 /* Explicitly disable IRQ since the NIC can be in any state. */
1381 e1000_irq_disable(adapter
);
1383 spin_lock_init(&adapter
->stats_lock
);
1385 set_bit(__E1000_DOWN
, &adapter
->flags
);
1391 * e1000_alloc_queues - Allocate memory for all rings
1392 * @adapter: board private structure to initialize
1394 * We allocate one ring per queue at run-time since we don't know the
1395 * number of queues at compile-time. The polling_netdev array is
1396 * intended for Multiqueue, but should work fine with a single queue.
1399 static int __devinit
e1000_alloc_queues(struct e1000_adapter
*adapter
)
1401 adapter
->tx_ring
= kcalloc(adapter
->num_tx_queues
,
1402 sizeof(struct e1000_tx_ring
), GFP_KERNEL
);
1403 if (!adapter
->tx_ring
)
1406 adapter
->rx_ring
= kcalloc(adapter
->num_rx_queues
,
1407 sizeof(struct e1000_rx_ring
), GFP_KERNEL
);
1408 if (!adapter
->rx_ring
) {
1409 kfree(adapter
->tx_ring
);
1413 adapter
->polling_netdev
= kcalloc(adapter
->num_rx_queues
,
1414 sizeof(struct net_device
),
1416 if (!adapter
->polling_netdev
) {
1417 kfree(adapter
->tx_ring
);
1418 kfree(adapter
->rx_ring
);
1422 return E1000_SUCCESS
;
1426 * e1000_open - Called when a network interface is made active
1427 * @netdev: network interface device structure
1429 * Returns 0 on success, negative value on failure
1431 * The open entry point is called when a network interface is made
1432 * active by the system (IFF_UP). At this point all resources needed
1433 * for transmit and receive operations are allocated, the interrupt
1434 * handler is registered with the OS, the watchdog timer is started,
1435 * and the stack is notified that the interface is ready.
1438 static int e1000_open(struct net_device
*netdev
)
1440 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1441 struct e1000_hw
*hw
= &adapter
->hw
;
1444 /* disallow open during test */
1445 if (test_bit(__E1000_TESTING
, &adapter
->flags
))
1448 /* allocate transmit descriptors */
1449 err
= e1000_setup_all_tx_resources(adapter
);
1453 /* allocate receive descriptors */
1454 err
= e1000_setup_all_rx_resources(adapter
);
1458 e1000_power_up_phy(adapter
);
1460 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
1461 if ((hw
->mng_cookie
.status
&
1462 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
)) {
1463 e1000_update_mng_vlan(adapter
);
1466 /* If AMT is enabled, let the firmware know that the network
1467 * interface is now open */
1468 if (hw
->mac_type
== e1000_82573
&&
1469 e1000_check_mng_mode(hw
))
1470 e1000_get_hw_control(adapter
);
1472 /* before we allocate an interrupt, we must be ready to handle it.
1473 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1474 * as soon as we call pci_request_irq, so we have to setup our
1475 * clean_rx handler before we do so. */
1476 e1000_configure(adapter
);
1478 err
= e1000_request_irq(adapter
);
1482 /* From here on the code is the same as e1000_up() */
1483 clear_bit(__E1000_DOWN
, &adapter
->flags
);
1485 napi_enable(&adapter
->napi
);
1487 e1000_irq_enable(adapter
);
1489 netif_start_queue(netdev
);
1491 /* fire a link status change interrupt to start the watchdog */
1492 ew32(ICS
, E1000_ICS_LSC
);
1494 return E1000_SUCCESS
;
1497 e1000_release_hw_control(adapter
);
1498 e1000_power_down_phy(adapter
);
1499 e1000_free_all_rx_resources(adapter
);
1501 e1000_free_all_tx_resources(adapter
);
1503 e1000_reset(adapter
);
1509 * e1000_close - Disables a network interface
1510 * @netdev: network interface device structure
1512 * Returns 0, this is not allowed to fail
1514 * The close entry point is called when an interface is de-activated
1515 * by the OS. The hardware is still under the drivers control, but
1516 * needs to be disabled. A global MAC reset is issued to stop the
1517 * hardware, and all transmit and receive resources are freed.
1520 static int e1000_close(struct net_device
*netdev
)
1522 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
1523 struct e1000_hw
*hw
= &adapter
->hw
;
1525 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
1526 e1000_down(adapter
);
1527 e1000_power_down_phy(adapter
);
1528 e1000_free_irq(adapter
);
1530 e1000_free_all_tx_resources(adapter
);
1531 e1000_free_all_rx_resources(adapter
);
1533 /* kill manageability vlan ID if supported, but not if a vlan with
1534 * the same ID is registered on the host OS (let 8021q kill it) */
1535 if ((hw
->mng_cookie
.status
&
1536 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
1538 vlan_group_get_device(adapter
->vlgrp
, adapter
->mng_vlan_id
))) {
1539 e1000_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
1542 /* If AMT is enabled, let the firmware know that the network
1543 * interface is now closed */
1544 if (hw
->mac_type
== e1000_82573
&&
1545 e1000_check_mng_mode(hw
))
1546 e1000_release_hw_control(adapter
);
1552 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1553 * @adapter: address of board private structure
1554 * @start: address of beginning of memory
1555 * @len: length of memory
1557 static bool e1000_check_64k_bound(struct e1000_adapter
*adapter
, void *start
,
1560 struct e1000_hw
*hw
= &adapter
->hw
;
1561 unsigned long begin
= (unsigned long)start
;
1562 unsigned long end
= begin
+ len
;
1564 /* First rev 82545 and 82546 need to not allow any memory
1565 * write location to cross 64k boundary due to errata 23 */
1566 if (hw
->mac_type
== e1000_82545
||
1567 hw
->mac_type
== e1000_82546
) {
1568 return ((begin
^ (end
- 1)) >> 16) != 0 ? false : true;
1575 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1576 * @adapter: board private structure
1577 * @txdr: tx descriptor ring (for a specific queue) to setup
1579 * Return 0 on success, negative on failure
1582 static int e1000_setup_tx_resources(struct e1000_adapter
*adapter
,
1583 struct e1000_tx_ring
*txdr
)
1585 struct pci_dev
*pdev
= adapter
->pdev
;
1588 size
= sizeof(struct e1000_buffer
) * txdr
->count
;
1589 txdr
->buffer_info
= vmalloc(size
);
1590 if (!txdr
->buffer_info
) {
1592 "Unable to allocate memory for the transmit descriptor ring\n");
1595 memset(txdr
->buffer_info
, 0, size
);
1597 /* round up to nearest 4K */
1599 txdr
->size
= txdr
->count
* sizeof(struct e1000_tx_desc
);
1600 txdr
->size
= ALIGN(txdr
->size
, 4096);
1602 txdr
->desc
= pci_alloc_consistent(pdev
, txdr
->size
, &txdr
->dma
);
1605 vfree(txdr
->buffer_info
);
1607 "Unable to allocate memory for the transmit descriptor ring\n");
1611 /* Fix for errata 23, can't cross 64kB boundary */
1612 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1613 void *olddesc
= txdr
->desc
;
1614 dma_addr_t olddma
= txdr
->dma
;
1615 DPRINTK(TX_ERR
, ERR
, "txdr align check failed: %u bytes "
1616 "at %p\n", txdr
->size
, txdr
->desc
);
1617 /* Try again, without freeing the previous */
1618 txdr
->desc
= pci_alloc_consistent(pdev
, txdr
->size
, &txdr
->dma
);
1619 /* Failed allocation, critical failure */
1621 pci_free_consistent(pdev
, txdr
->size
, olddesc
, olddma
);
1622 goto setup_tx_desc_die
;
1625 if (!e1000_check_64k_bound(adapter
, txdr
->desc
, txdr
->size
)) {
1627 pci_free_consistent(pdev
, txdr
->size
, txdr
->desc
,
1629 pci_free_consistent(pdev
, txdr
->size
, olddesc
, olddma
);
1631 "Unable to allocate aligned memory "
1632 "for the transmit descriptor ring\n");
1633 vfree(txdr
->buffer_info
);
1636 /* Free old allocation, new allocation was successful */
1637 pci_free_consistent(pdev
, txdr
->size
, olddesc
, olddma
);
1640 memset(txdr
->desc
, 0, txdr
->size
);
1642 txdr
->next_to_use
= 0;
1643 txdr
->next_to_clean
= 0;
1644 spin_lock_init(&txdr
->tx_lock
);
1650 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1651 * (Descriptors) for all queues
1652 * @adapter: board private structure
1654 * Return 0 on success, negative on failure
1657 int e1000_setup_all_tx_resources(struct e1000_adapter
*adapter
)
1661 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
1662 err
= e1000_setup_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1665 "Allocation for Tx Queue %u failed\n", i
);
1666 for (i
-- ; i
>= 0; i
--)
1667 e1000_free_tx_resources(adapter
,
1668 &adapter
->tx_ring
[i
]);
1677 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1678 * @adapter: board private structure
1680 * Configure the Tx unit of the MAC after a reset.
1683 static void e1000_configure_tx(struct e1000_adapter
*adapter
)
1686 struct e1000_hw
*hw
= &adapter
->hw
;
1687 u32 tdlen
, tctl
, tipg
, tarc
;
1690 /* Setup the HW Tx Head and Tail descriptor pointers */
1692 switch (adapter
->num_tx_queues
) {
1695 tdba
= adapter
->tx_ring
[0].dma
;
1696 tdlen
= adapter
->tx_ring
[0].count
*
1697 sizeof(struct e1000_tx_desc
);
1699 ew32(TDBAH
, (tdba
>> 32));
1700 ew32(TDBAL
, (tdba
& 0x00000000ffffffffULL
));
1703 adapter
->tx_ring
[0].tdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDH
: E1000_82542_TDH
);
1704 adapter
->tx_ring
[0].tdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_TDT
: E1000_82542_TDT
);
1708 /* Set the default values for the Tx Inter Packet Gap timer */
1709 if (hw
->mac_type
<= e1000_82547_rev_2
&&
1710 (hw
->media_type
== e1000_media_type_fiber
||
1711 hw
->media_type
== e1000_media_type_internal_serdes
))
1712 tipg
= DEFAULT_82543_TIPG_IPGT_FIBER
;
1714 tipg
= DEFAULT_82543_TIPG_IPGT_COPPER
;
1716 switch (hw
->mac_type
) {
1717 case e1000_82542_rev2_0
:
1718 case e1000_82542_rev2_1
:
1719 tipg
= DEFAULT_82542_TIPG_IPGT
;
1720 ipgr1
= DEFAULT_82542_TIPG_IPGR1
;
1721 ipgr2
= DEFAULT_82542_TIPG_IPGR2
;
1723 case e1000_80003es2lan
:
1724 ipgr1
= DEFAULT_82543_TIPG_IPGR1
;
1725 ipgr2
= DEFAULT_80003ES2LAN_TIPG_IPGR2
;
1728 ipgr1
= DEFAULT_82543_TIPG_IPGR1
;
1729 ipgr2
= DEFAULT_82543_TIPG_IPGR2
;
1732 tipg
|= ipgr1
<< E1000_TIPG_IPGR1_SHIFT
;
1733 tipg
|= ipgr2
<< E1000_TIPG_IPGR2_SHIFT
;
1736 /* Set the Tx Interrupt Delay register */
1738 ew32(TIDV
, adapter
->tx_int_delay
);
1739 if (hw
->mac_type
>= e1000_82540
)
1740 ew32(TADV
, adapter
->tx_abs_int_delay
);
1742 /* Program the Transmit Control Register */
1745 tctl
&= ~E1000_TCTL_CT
;
1746 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
1747 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
1749 if (hw
->mac_type
== e1000_82571
|| hw
->mac_type
== e1000_82572
) {
1751 /* set the speed mode bit, we'll clear it if we're not at
1752 * gigabit link later */
1755 } else if (hw
->mac_type
== e1000_80003es2lan
) {
1764 e1000_config_collision_dist(hw
);
1766 /* Setup Transmit Descriptor Settings for eop descriptor */
1767 adapter
->txd_cmd
= E1000_TXD_CMD_EOP
| E1000_TXD_CMD_IFCS
;
1769 /* only set IDE if we are delaying interrupts using the timers */
1770 if (adapter
->tx_int_delay
)
1771 adapter
->txd_cmd
|= E1000_TXD_CMD_IDE
;
1773 if (hw
->mac_type
< e1000_82543
)
1774 adapter
->txd_cmd
|= E1000_TXD_CMD_RPS
;
1776 adapter
->txd_cmd
|= E1000_TXD_CMD_RS
;
1778 /* Cache if we're 82544 running in PCI-X because we'll
1779 * need this to apply a workaround later in the send path. */
1780 if (hw
->mac_type
== e1000_82544
&&
1781 hw
->bus_type
== e1000_bus_type_pcix
)
1782 adapter
->pcix_82544
= 1;
1789 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1790 * @adapter: board private structure
1791 * @rxdr: rx descriptor ring (for a specific queue) to setup
1793 * Returns 0 on success, negative on failure
1796 static int e1000_setup_rx_resources(struct e1000_adapter
*adapter
,
1797 struct e1000_rx_ring
*rxdr
)
1799 struct e1000_hw
*hw
= &adapter
->hw
;
1800 struct pci_dev
*pdev
= adapter
->pdev
;
1803 size
= sizeof(struct e1000_buffer
) * rxdr
->count
;
1804 rxdr
->buffer_info
= vmalloc(size
);
1805 if (!rxdr
->buffer_info
) {
1807 "Unable to allocate memory for the receive descriptor ring\n");
1810 memset(rxdr
->buffer_info
, 0, size
);
1812 if (hw
->mac_type
<= e1000_82547_rev_2
)
1813 desc_len
= sizeof(struct e1000_rx_desc
);
1815 desc_len
= sizeof(union e1000_rx_desc_packet_split
);
1817 /* Round up to nearest 4K */
1819 rxdr
->size
= rxdr
->count
* desc_len
;
1820 rxdr
->size
= ALIGN(rxdr
->size
, 4096);
1822 rxdr
->desc
= pci_alloc_consistent(pdev
, rxdr
->size
, &rxdr
->dma
);
1826 "Unable to allocate memory for the receive descriptor ring\n");
1828 vfree(rxdr
->buffer_info
);
1832 /* Fix for errata 23, can't cross 64kB boundary */
1833 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1834 void *olddesc
= rxdr
->desc
;
1835 dma_addr_t olddma
= rxdr
->dma
;
1836 DPRINTK(RX_ERR
, ERR
, "rxdr align check failed: %u bytes "
1837 "at %p\n", rxdr
->size
, rxdr
->desc
);
1838 /* Try again, without freeing the previous */
1839 rxdr
->desc
= pci_alloc_consistent(pdev
, rxdr
->size
, &rxdr
->dma
);
1840 /* Failed allocation, critical failure */
1842 pci_free_consistent(pdev
, rxdr
->size
, olddesc
, olddma
);
1844 "Unable to allocate memory "
1845 "for the receive descriptor ring\n");
1846 goto setup_rx_desc_die
;
1849 if (!e1000_check_64k_bound(adapter
, rxdr
->desc
, rxdr
->size
)) {
1851 pci_free_consistent(pdev
, rxdr
->size
, rxdr
->desc
,
1853 pci_free_consistent(pdev
, rxdr
->size
, olddesc
, olddma
);
1855 "Unable to allocate aligned memory "
1856 "for the receive descriptor ring\n");
1857 goto setup_rx_desc_die
;
1859 /* Free old allocation, new allocation was successful */
1860 pci_free_consistent(pdev
, rxdr
->size
, olddesc
, olddma
);
1863 memset(rxdr
->desc
, 0, rxdr
->size
);
1865 rxdr
->next_to_clean
= 0;
1866 rxdr
->next_to_use
= 0;
1872 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1873 * (Descriptors) for all queues
1874 * @adapter: board private structure
1876 * Return 0 on success, negative on failure
1879 int e1000_setup_all_rx_resources(struct e1000_adapter
*adapter
)
1883 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1884 err
= e1000_setup_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
1887 "Allocation for Rx Queue %u failed\n", i
);
1888 for (i
-- ; i
>= 0; i
--)
1889 e1000_free_rx_resources(adapter
,
1890 &adapter
->rx_ring
[i
]);
1899 * e1000_setup_rctl - configure the receive control registers
1900 * @adapter: Board private structure
1902 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1903 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1904 static void e1000_setup_rctl(struct e1000_adapter
*adapter
)
1906 struct e1000_hw
*hw
= &adapter
->hw
;
1911 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
1913 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
|
1914 E1000_RCTL_LBM_NO
| E1000_RCTL_RDMTS_HALF
|
1915 (hw
->mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
1917 if (hw
->tbi_compatibility_on
== 1)
1918 rctl
|= E1000_RCTL_SBP
;
1920 rctl
&= ~E1000_RCTL_SBP
;
1922 if (adapter
->netdev
->mtu
<= ETH_DATA_LEN
)
1923 rctl
&= ~E1000_RCTL_LPE
;
1925 rctl
|= E1000_RCTL_LPE
;
1927 /* Setup buffer sizes */
1928 rctl
&= ~E1000_RCTL_SZ_4096
;
1929 rctl
|= E1000_RCTL_BSEX
;
1930 switch (adapter
->rx_buffer_len
) {
1931 case E1000_RXBUFFER_256
:
1932 rctl
|= E1000_RCTL_SZ_256
;
1933 rctl
&= ~E1000_RCTL_BSEX
;
1935 case E1000_RXBUFFER_512
:
1936 rctl
|= E1000_RCTL_SZ_512
;
1937 rctl
&= ~E1000_RCTL_BSEX
;
1939 case E1000_RXBUFFER_1024
:
1940 rctl
|= E1000_RCTL_SZ_1024
;
1941 rctl
&= ~E1000_RCTL_BSEX
;
1943 case E1000_RXBUFFER_2048
:
1945 rctl
|= E1000_RCTL_SZ_2048
;
1946 rctl
&= ~E1000_RCTL_BSEX
;
1948 case E1000_RXBUFFER_4096
:
1949 rctl
|= E1000_RCTL_SZ_4096
;
1951 case E1000_RXBUFFER_8192
:
1952 rctl
|= E1000_RCTL_SZ_8192
;
1954 case E1000_RXBUFFER_16384
:
1955 rctl
|= E1000_RCTL_SZ_16384
;
1963 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1964 * @adapter: board private structure
1966 * Configure the Rx unit of the MAC after a reset.
1969 static void e1000_configure_rx(struct e1000_adapter
*adapter
)
1972 struct e1000_hw
*hw
= &adapter
->hw
;
1973 u32 rdlen
, rctl
, rxcsum
, ctrl_ext
;
1975 rdlen
= adapter
->rx_ring
[0].count
*
1976 sizeof(struct e1000_rx_desc
);
1977 adapter
->clean_rx
= e1000_clean_rx_irq
;
1978 adapter
->alloc_rx_buf
= e1000_alloc_rx_buffers
;
1980 /* disable receives while setting up the descriptors */
1982 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
1984 /* set the Receive Delay Timer Register */
1985 ew32(RDTR
, adapter
->rx_int_delay
);
1987 if (hw
->mac_type
>= e1000_82540
) {
1988 ew32(RADV
, adapter
->rx_abs_int_delay
);
1989 if (adapter
->itr_setting
!= 0)
1990 ew32(ITR
, 1000000000 / (adapter
->itr
* 256));
1993 if (hw
->mac_type
>= e1000_82571
) {
1994 ctrl_ext
= er32(CTRL_EXT
);
1995 /* Reset delay timers after every interrupt */
1996 ctrl_ext
|= E1000_CTRL_EXT_INT_TIMER_CLR
;
1997 /* Auto-Mask interrupts upon ICR access */
1998 ctrl_ext
|= E1000_CTRL_EXT_IAME
;
1999 ew32(IAM
, 0xffffffff);
2000 ew32(CTRL_EXT
, ctrl_ext
);
2001 E1000_WRITE_FLUSH();
2004 /* Setup the HW Rx Head and Tail Descriptor Pointers and
2005 * the Base and Length of the Rx Descriptor Ring */
2006 switch (adapter
->num_rx_queues
) {
2009 rdba
= adapter
->rx_ring
[0].dma
;
2011 ew32(RDBAH
, (rdba
>> 32));
2012 ew32(RDBAL
, (rdba
& 0x00000000ffffffffULL
));
2015 adapter
->rx_ring
[0].rdh
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDH
: E1000_82542_RDH
);
2016 adapter
->rx_ring
[0].rdt
= ((hw
->mac_type
>= e1000_82543
) ? E1000_RDT
: E1000_82542_RDT
);
2020 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
2021 if (hw
->mac_type
>= e1000_82543
) {
2022 rxcsum
= er32(RXCSUM
);
2023 if (adapter
->rx_csum
)
2024 rxcsum
|= E1000_RXCSUM_TUOFL
;
2026 /* don't need to clear IPPCSE as it defaults to 0 */
2027 rxcsum
&= ~E1000_RXCSUM_TUOFL
;
2028 ew32(RXCSUM
, rxcsum
);
2031 /* Enable Receives */
2036 * e1000_free_tx_resources - Free Tx Resources per Queue
2037 * @adapter: board private structure
2038 * @tx_ring: Tx descriptor ring for a specific queue
2040 * Free all transmit software resources
2043 static void e1000_free_tx_resources(struct e1000_adapter
*adapter
,
2044 struct e1000_tx_ring
*tx_ring
)
2046 struct pci_dev
*pdev
= adapter
->pdev
;
2048 e1000_clean_tx_ring(adapter
, tx_ring
);
2050 vfree(tx_ring
->buffer_info
);
2051 tx_ring
->buffer_info
= NULL
;
2053 pci_free_consistent(pdev
, tx_ring
->size
, tx_ring
->desc
, tx_ring
->dma
);
2055 tx_ring
->desc
= NULL
;
2059 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
2060 * @adapter: board private structure
2062 * Free all transmit software resources
2065 void e1000_free_all_tx_resources(struct e1000_adapter
*adapter
)
2069 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2070 e1000_free_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
2073 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter
*adapter
,
2074 struct e1000_buffer
*buffer_info
)
2076 if (buffer_info
->dma
) {
2077 pci_unmap_page(adapter
->pdev
,
2079 buffer_info
->length
,
2081 buffer_info
->dma
= 0;
2083 if (buffer_info
->skb
) {
2084 dev_kfree_skb_any(buffer_info
->skb
);
2085 buffer_info
->skb
= NULL
;
2087 /* buffer_info must be completely set up in the transmit path */
2091 * e1000_clean_tx_ring - Free Tx Buffers
2092 * @adapter: board private structure
2093 * @tx_ring: ring to be cleaned
2096 static void e1000_clean_tx_ring(struct e1000_adapter
*adapter
,
2097 struct e1000_tx_ring
*tx_ring
)
2099 struct e1000_hw
*hw
= &adapter
->hw
;
2100 struct e1000_buffer
*buffer_info
;
2104 /* Free all the Tx ring sk_buffs */
2106 for (i
= 0; i
< tx_ring
->count
; i
++) {
2107 buffer_info
= &tx_ring
->buffer_info
[i
];
2108 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
2111 size
= sizeof(struct e1000_buffer
) * tx_ring
->count
;
2112 memset(tx_ring
->buffer_info
, 0, size
);
2114 /* Zero out the descriptor ring */
2116 memset(tx_ring
->desc
, 0, tx_ring
->size
);
2118 tx_ring
->next_to_use
= 0;
2119 tx_ring
->next_to_clean
= 0;
2120 tx_ring
->last_tx_tso
= 0;
2122 writel(0, hw
->hw_addr
+ tx_ring
->tdh
);
2123 writel(0, hw
->hw_addr
+ tx_ring
->tdt
);
2127 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2128 * @adapter: board private structure
2131 static void e1000_clean_all_tx_rings(struct e1000_adapter
*adapter
)
2135 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2136 e1000_clean_tx_ring(adapter
, &adapter
->tx_ring
[i
]);
2140 * e1000_free_rx_resources - Free Rx Resources
2141 * @adapter: board private structure
2142 * @rx_ring: ring to clean the resources from
2144 * Free all receive software resources
2147 static void e1000_free_rx_resources(struct e1000_adapter
*adapter
,
2148 struct e1000_rx_ring
*rx_ring
)
2150 struct pci_dev
*pdev
= adapter
->pdev
;
2152 e1000_clean_rx_ring(adapter
, rx_ring
);
2154 vfree(rx_ring
->buffer_info
);
2155 rx_ring
->buffer_info
= NULL
;
2157 pci_free_consistent(pdev
, rx_ring
->size
, rx_ring
->desc
, rx_ring
->dma
);
2159 rx_ring
->desc
= NULL
;
2163 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2164 * @adapter: board private structure
2166 * Free all receive software resources
2169 void e1000_free_all_rx_resources(struct e1000_adapter
*adapter
)
2173 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2174 e1000_free_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
2178 * e1000_clean_rx_ring - Free Rx Buffers per Queue
2179 * @adapter: board private structure
2180 * @rx_ring: ring to free buffers from
2183 static void e1000_clean_rx_ring(struct e1000_adapter
*adapter
,
2184 struct e1000_rx_ring
*rx_ring
)
2186 struct e1000_hw
*hw
= &adapter
->hw
;
2187 struct e1000_buffer
*buffer_info
;
2188 struct pci_dev
*pdev
= adapter
->pdev
;
2192 /* Free all the Rx ring sk_buffs */
2193 for (i
= 0; i
< rx_ring
->count
; i
++) {
2194 buffer_info
= &rx_ring
->buffer_info
[i
];
2195 if (buffer_info
->skb
) {
2196 pci_unmap_single(pdev
,
2198 buffer_info
->length
,
2199 PCI_DMA_FROMDEVICE
);
2201 dev_kfree_skb(buffer_info
->skb
);
2202 buffer_info
->skb
= NULL
;
2206 size
= sizeof(struct e1000_buffer
) * rx_ring
->count
;
2207 memset(rx_ring
->buffer_info
, 0, size
);
2209 /* Zero out the descriptor ring */
2211 memset(rx_ring
->desc
, 0, rx_ring
->size
);
2213 rx_ring
->next_to_clean
= 0;
2214 rx_ring
->next_to_use
= 0;
2216 writel(0, hw
->hw_addr
+ rx_ring
->rdh
);
2217 writel(0, hw
->hw_addr
+ rx_ring
->rdt
);
2221 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2222 * @adapter: board private structure
2225 static void e1000_clean_all_rx_rings(struct e1000_adapter
*adapter
)
2229 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2230 e1000_clean_rx_ring(adapter
, &adapter
->rx_ring
[i
]);
2233 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2234 * and memory write and invalidate disabled for certain operations
2236 static void e1000_enter_82542_rst(struct e1000_adapter
*adapter
)
2238 struct e1000_hw
*hw
= &adapter
->hw
;
2239 struct net_device
*netdev
= adapter
->netdev
;
2242 e1000_pci_clear_mwi(hw
);
2245 rctl
|= E1000_RCTL_RST
;
2247 E1000_WRITE_FLUSH();
2250 if (netif_running(netdev
))
2251 e1000_clean_all_rx_rings(adapter
);
2254 static void e1000_leave_82542_rst(struct e1000_adapter
*adapter
)
2256 struct e1000_hw
*hw
= &adapter
->hw
;
2257 struct net_device
*netdev
= adapter
->netdev
;
2261 rctl
&= ~E1000_RCTL_RST
;
2263 E1000_WRITE_FLUSH();
2266 if (hw
->pci_cmd_word
& PCI_COMMAND_INVALIDATE
)
2267 e1000_pci_set_mwi(hw
);
2269 if (netif_running(netdev
)) {
2270 /* No need to loop, because 82542 supports only 1 queue */
2271 struct e1000_rx_ring
*ring
= &adapter
->rx_ring
[0];
2272 e1000_configure_rx(adapter
);
2273 adapter
->alloc_rx_buf(adapter
, ring
, E1000_DESC_UNUSED(ring
));
2278 * e1000_set_mac - Change the Ethernet Address of the NIC
2279 * @netdev: network interface device structure
2280 * @p: pointer to an address structure
2282 * Returns 0 on success, negative on failure
2285 static int e1000_set_mac(struct net_device
*netdev
, void *p
)
2287 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2288 struct e1000_hw
*hw
= &adapter
->hw
;
2289 struct sockaddr
*addr
= p
;
2291 if (!is_valid_ether_addr(addr
->sa_data
))
2292 return -EADDRNOTAVAIL
;
2294 /* 82542 2.0 needs to be in reset to write receive address registers */
2296 if (hw
->mac_type
== e1000_82542_rev2_0
)
2297 e1000_enter_82542_rst(adapter
);
2299 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
2300 memcpy(hw
->mac_addr
, addr
->sa_data
, netdev
->addr_len
);
2302 e1000_rar_set(hw
, hw
->mac_addr
, 0);
2304 /* With 82571 controllers, LAA may be overwritten (with the default)
2305 * due to controller reset from the other port. */
2306 if (hw
->mac_type
== e1000_82571
) {
2307 /* activate the work around */
2308 hw
->laa_is_present
= 1;
2310 /* Hold a copy of the LAA in RAR[14] This is done so that
2311 * between the time RAR[0] gets clobbered and the time it
2312 * gets fixed (in e1000_watchdog), the actual LAA is in one
2313 * of the RARs and no incoming packets directed to this port
2314 * are dropped. Eventaully the LAA will be in RAR[0] and
2316 e1000_rar_set(hw
, hw
->mac_addr
,
2317 E1000_RAR_ENTRIES
- 1);
2320 if (hw
->mac_type
== e1000_82542_rev2_0
)
2321 e1000_leave_82542_rst(adapter
);
2327 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2328 * @netdev: network interface device structure
2330 * The set_rx_mode entry point is called whenever the unicast or multicast
2331 * address lists or the network interface flags are updated. This routine is
2332 * responsible for configuring the hardware for proper unicast, multicast,
2333 * promiscuous mode, and all-multi behavior.
2336 static void e1000_set_rx_mode(struct net_device
*netdev
)
2338 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
2339 struct e1000_hw
*hw
= &adapter
->hw
;
2340 struct dev_addr_list
*uc_ptr
;
2341 struct dev_addr_list
*mc_ptr
;
2344 int i
, rar_entries
= E1000_RAR_ENTRIES
;
2345 int mta_reg_count
= (hw
->mac_type
== e1000_ich8lan
) ?
2346 E1000_NUM_MTA_REGISTERS_ICH8LAN
:
2347 E1000_NUM_MTA_REGISTERS
;
2349 if (hw
->mac_type
== e1000_ich8lan
)
2350 rar_entries
= E1000_RAR_ENTRIES_ICH8LAN
;
2352 /* reserve RAR[14] for LAA over-write work-around */
2353 if (hw
->mac_type
== e1000_82571
)
2356 /* Check for Promiscuous and All Multicast modes */
2360 if (netdev
->flags
& IFF_PROMISC
) {
2361 rctl
|= (E1000_RCTL_UPE
| E1000_RCTL_MPE
);
2362 rctl
&= ~E1000_RCTL_VFE
;
2364 if (netdev
->flags
& IFF_ALLMULTI
) {
2365 rctl
|= E1000_RCTL_MPE
;
2367 rctl
&= ~E1000_RCTL_MPE
;
2369 if (adapter
->hw
.mac_type
!= e1000_ich8lan
)
2370 rctl
|= E1000_RCTL_VFE
;
2374 if (netdev
->uc_count
> rar_entries
- 1) {
2375 rctl
|= E1000_RCTL_UPE
;
2376 } else if (!(netdev
->flags
& IFF_PROMISC
)) {
2377 rctl
&= ~E1000_RCTL_UPE
;
2378 uc_ptr
= netdev
->uc_list
;
2383 /* 82542 2.0 needs to be in reset to write receive address registers */
2385 if (hw
->mac_type
== e1000_82542_rev2_0
)
2386 e1000_enter_82542_rst(adapter
);
2388 /* load the first 14 addresses into the exact filters 1-14. Unicast
2389 * addresses take precedence to avoid disabling unicast filtering
2392 * RAR 0 is used for the station MAC adddress
2393 * if there are not 14 addresses, go ahead and clear the filters
2394 * -- with 82571 controllers only 0-13 entries are filled here
2396 mc_ptr
= netdev
->mc_list
;
2398 for (i
= 1; i
< rar_entries
; i
++) {
2400 e1000_rar_set(hw
, uc_ptr
->da_addr
, i
);
2401 uc_ptr
= uc_ptr
->next
;
2402 } else if (mc_ptr
) {
2403 e1000_rar_set(hw
, mc_ptr
->da_addr
, i
);
2404 mc_ptr
= mc_ptr
->next
;
2406 E1000_WRITE_REG_ARRAY(hw
, RA
, i
<< 1, 0);
2407 E1000_WRITE_FLUSH();
2408 E1000_WRITE_REG_ARRAY(hw
, RA
, (i
<< 1) + 1, 0);
2409 E1000_WRITE_FLUSH();
2412 WARN_ON(uc_ptr
!= NULL
);
2414 /* clear the old settings from the multicast hash table */
2416 for (i
= 0; i
< mta_reg_count
; i
++) {
2417 E1000_WRITE_REG_ARRAY(hw
, MTA
, i
, 0);
2418 E1000_WRITE_FLUSH();
2421 /* load any remaining addresses into the hash table */
2423 for (; mc_ptr
; mc_ptr
= mc_ptr
->next
) {
2424 hash_value
= e1000_hash_mc_addr(hw
, mc_ptr
->da_addr
);
2425 e1000_mta_set(hw
, hash_value
);
2428 if (hw
->mac_type
== e1000_82542_rev2_0
)
2429 e1000_leave_82542_rst(adapter
);
2432 /* Need to wait a few seconds after link up to get diagnostic information from
2435 static void e1000_update_phy_info(unsigned long data
)
2437 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2438 struct e1000_hw
*hw
= &adapter
->hw
;
2439 e1000_phy_get_info(hw
, &adapter
->phy_info
);
2443 * e1000_82547_tx_fifo_stall - Timer Call-back
2444 * @data: pointer to adapter cast into an unsigned long
2447 static void e1000_82547_tx_fifo_stall(unsigned long data
)
2449 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2450 struct e1000_hw
*hw
= &adapter
->hw
;
2451 struct net_device
*netdev
= adapter
->netdev
;
2454 if (atomic_read(&adapter
->tx_fifo_stall
)) {
2455 if ((er32(TDT
) == er32(TDH
)) &&
2456 (er32(TDFT
) == er32(TDFH
)) &&
2457 (er32(TDFTS
) == er32(TDFHS
))) {
2459 ew32(TCTL
, tctl
& ~E1000_TCTL_EN
);
2460 ew32(TDFT
, adapter
->tx_head_addr
);
2461 ew32(TDFH
, adapter
->tx_head_addr
);
2462 ew32(TDFTS
, adapter
->tx_head_addr
);
2463 ew32(TDFHS
, adapter
->tx_head_addr
);
2465 E1000_WRITE_FLUSH();
2467 adapter
->tx_fifo_head
= 0;
2468 atomic_set(&adapter
->tx_fifo_stall
, 0);
2469 netif_wake_queue(netdev
);
2471 mod_timer(&adapter
->tx_fifo_stall_timer
, jiffies
+ 1);
2477 * e1000_watchdog - Timer Call-back
2478 * @data: pointer to adapter cast into an unsigned long
2480 static void e1000_watchdog(unsigned long data
)
2482 struct e1000_adapter
*adapter
= (struct e1000_adapter
*)data
;
2483 struct e1000_hw
*hw
= &adapter
->hw
;
2484 struct net_device
*netdev
= adapter
->netdev
;
2485 struct e1000_tx_ring
*txdr
= adapter
->tx_ring
;
2489 ret_val
= e1000_check_for_link(hw
);
2490 if ((ret_val
== E1000_ERR_PHY
) &&
2491 (hw
->phy_type
== e1000_phy_igp_3
) &&
2492 (er32(CTRL
) & E1000_PHY_CTRL_GBE_DISABLE
)) {
2493 /* See e1000_kumeran_lock_loss_workaround() */
2495 "Gigabit has been disabled, downgrading speed\n");
2498 if (hw
->mac_type
== e1000_82573
) {
2499 e1000_enable_tx_pkt_filtering(hw
);
2500 if (adapter
->mng_vlan_id
!= hw
->mng_cookie
.vlan_id
)
2501 e1000_update_mng_vlan(adapter
);
2504 if ((hw
->media_type
== e1000_media_type_internal_serdes
) &&
2505 !(er32(TXCW
) & E1000_TXCW_ANE
))
2506 link
= !hw
->serdes_link_down
;
2508 link
= er32(STATUS
) & E1000_STATUS_LU
;
2511 if (!netif_carrier_ok(netdev
)) {
2514 e1000_get_speed_and_duplex(hw
,
2515 &adapter
->link_speed
,
2516 &adapter
->link_duplex
);
2519 DPRINTK(LINK
, INFO
, "NIC Link is Up %d Mbps %s, "
2520 "Flow Control: %s\n",
2521 adapter
->link_speed
,
2522 adapter
->link_duplex
== FULL_DUPLEX
?
2523 "Full Duplex" : "Half Duplex",
2524 ((ctrl
& E1000_CTRL_TFCE
) && (ctrl
&
2525 E1000_CTRL_RFCE
)) ? "RX/TX" : ((ctrl
&
2526 E1000_CTRL_RFCE
) ? "RX" : ((ctrl
&
2527 E1000_CTRL_TFCE
) ? "TX" : "None" )));
2529 /* tweak tx_queue_len according to speed/duplex
2530 * and adjust the timeout factor */
2531 netdev
->tx_queue_len
= adapter
->tx_queue_len
;
2532 adapter
->tx_timeout_factor
= 1;
2533 switch (adapter
->link_speed
) {
2536 netdev
->tx_queue_len
= 10;
2537 adapter
->tx_timeout_factor
= 8;
2541 netdev
->tx_queue_len
= 100;
2542 /* maybe add some timeout factor ? */
2546 if ((hw
->mac_type
== e1000_82571
||
2547 hw
->mac_type
== e1000_82572
) &&
2550 tarc0
= er32(TARC0
);
2551 tarc0
&= ~(1 << 21);
2555 /* disable TSO for pcie and 10/100 speeds, to avoid
2556 * some hardware issues */
2557 if (!adapter
->tso_force
&&
2558 hw
->bus_type
== e1000_bus_type_pci_express
){
2559 switch (adapter
->link_speed
) {
2563 "10/100 speed: disabling TSO\n");
2564 netdev
->features
&= ~NETIF_F_TSO
;
2565 netdev
->features
&= ~NETIF_F_TSO6
;
2568 netdev
->features
|= NETIF_F_TSO
;
2569 netdev
->features
|= NETIF_F_TSO6
;
2577 /* enable transmits in the hardware, need to do this
2578 * after setting TARC0 */
2580 tctl
|= E1000_TCTL_EN
;
2583 netif_carrier_on(netdev
);
2584 netif_wake_queue(netdev
);
2585 mod_timer(&adapter
->phy_info_timer
, round_jiffies(jiffies
+ 2 * HZ
));
2586 adapter
->smartspeed
= 0;
2588 /* make sure the receive unit is started */
2589 if (hw
->rx_needs_kicking
) {
2590 u32 rctl
= er32(RCTL
);
2591 ew32(RCTL
, rctl
| E1000_RCTL_EN
);
2595 if (netif_carrier_ok(netdev
)) {
2596 adapter
->link_speed
= 0;
2597 adapter
->link_duplex
= 0;
2598 DPRINTK(LINK
, INFO
, "NIC Link is Down\n");
2599 netif_carrier_off(netdev
);
2600 netif_stop_queue(netdev
);
2601 mod_timer(&adapter
->phy_info_timer
, round_jiffies(jiffies
+ 2 * HZ
));
2603 /* 80003ES2LAN workaround--
2604 * For packet buffer work-around on link down event;
2605 * disable receives in the ISR and
2606 * reset device here in the watchdog
2608 if (hw
->mac_type
== e1000_80003es2lan
)
2610 schedule_work(&adapter
->reset_task
);
2613 e1000_smartspeed(adapter
);
2616 e1000_update_stats(adapter
);
2618 hw
->tx_packet_delta
= adapter
->stats
.tpt
- adapter
->tpt_old
;
2619 adapter
->tpt_old
= adapter
->stats
.tpt
;
2620 hw
->collision_delta
= adapter
->stats
.colc
- adapter
->colc_old
;
2621 adapter
->colc_old
= adapter
->stats
.colc
;
2623 adapter
->gorcl
= adapter
->stats
.gorcl
- adapter
->gorcl_old
;
2624 adapter
->gorcl_old
= adapter
->stats
.gorcl
;
2625 adapter
->gotcl
= adapter
->stats
.gotcl
- adapter
->gotcl_old
;
2626 adapter
->gotcl_old
= adapter
->stats
.gotcl
;
2628 e1000_update_adaptive(hw
);
2630 if (!netif_carrier_ok(netdev
)) {
2631 if (E1000_DESC_UNUSED(txdr
) + 1 < txdr
->count
) {
2632 /* We've lost link, so the controller stops DMA,
2633 * but we've got queued Tx work that's never going
2634 * to get done, so reset controller to flush Tx.
2635 * (Do the reset outside of interrupt context). */
2636 adapter
->tx_timeout_count
++;
2637 schedule_work(&adapter
->reset_task
);
2641 /* Cause software interrupt to ensure rx ring is cleaned */
2642 ew32(ICS
, E1000_ICS_RXDMT0
);
2644 /* Force detection of hung controller every watchdog period */
2645 adapter
->detect_tx_hung
= true;
2647 /* With 82571 controllers, LAA may be overwritten due to controller
2648 * reset from the other port. Set the appropriate LAA in RAR[0] */
2649 if (hw
->mac_type
== e1000_82571
&& hw
->laa_is_present
)
2650 e1000_rar_set(hw
, hw
->mac_addr
, 0);
2652 /* Reset the timer */
2653 mod_timer(&adapter
->watchdog_timer
, round_jiffies(jiffies
+ 2 * HZ
));
2656 enum latency_range
{
2660 latency_invalid
= 255
2664 * e1000_update_itr - update the dynamic ITR value based on statistics
2665 * Stores a new ITR value based on packets and byte
2666 * counts during the last interrupt. The advantage of per interrupt
2667 * computation is faster updates and more accurate ITR for the current
2668 * traffic pattern. Constants in this function were computed
2669 * based on theoretical maximum wire speed and thresholds were set based
2670 * on testing data as well as attempting to minimize response time
2671 * while increasing bulk throughput.
2672 * this functionality is controlled by the InterruptThrottleRate module
2673 * parameter (see e1000_param.c)
2674 * @adapter: pointer to adapter
2675 * @itr_setting: current adapter->itr
2676 * @packets: the number of packets during this measurement interval
2677 * @bytes: the number of bytes during this measurement interval
2679 static unsigned int e1000_update_itr(struct e1000_adapter
*adapter
,
2680 u16 itr_setting
, int packets
, int bytes
)
2682 unsigned int retval
= itr_setting
;
2683 struct e1000_hw
*hw
= &adapter
->hw
;
2685 if (unlikely(hw
->mac_type
< e1000_82540
))
2686 goto update_itr_done
;
2689 goto update_itr_done
;
2691 switch (itr_setting
) {
2692 case lowest_latency
:
2693 /* jumbo frames get bulk treatment*/
2694 if (bytes
/packets
> 8000)
2695 retval
= bulk_latency
;
2696 else if ((packets
< 5) && (bytes
> 512))
2697 retval
= low_latency
;
2699 case low_latency
: /* 50 usec aka 20000 ints/s */
2700 if (bytes
> 10000) {
2701 /* jumbo frames need bulk latency setting */
2702 if (bytes
/packets
> 8000)
2703 retval
= bulk_latency
;
2704 else if ((packets
< 10) || ((bytes
/packets
) > 1200))
2705 retval
= bulk_latency
;
2706 else if ((packets
> 35))
2707 retval
= lowest_latency
;
2708 } else if (bytes
/packets
> 2000)
2709 retval
= bulk_latency
;
2710 else if (packets
<= 2 && bytes
< 512)
2711 retval
= lowest_latency
;
2713 case bulk_latency
: /* 250 usec aka 4000 ints/s */
2714 if (bytes
> 25000) {
2716 retval
= low_latency
;
2717 } else if (bytes
< 6000) {
2718 retval
= low_latency
;
2727 static void e1000_set_itr(struct e1000_adapter
*adapter
)
2729 struct e1000_hw
*hw
= &adapter
->hw
;
2731 u32 new_itr
= adapter
->itr
;
2733 if (unlikely(hw
->mac_type
< e1000_82540
))
2736 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2737 if (unlikely(adapter
->link_speed
!= SPEED_1000
)) {
2743 adapter
->tx_itr
= e1000_update_itr(adapter
,
2745 adapter
->total_tx_packets
,
2746 adapter
->total_tx_bytes
);
2747 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2748 if (adapter
->itr_setting
== 3 && adapter
->tx_itr
== lowest_latency
)
2749 adapter
->tx_itr
= low_latency
;
2751 adapter
->rx_itr
= e1000_update_itr(adapter
,
2753 adapter
->total_rx_packets
,
2754 adapter
->total_rx_bytes
);
2755 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2756 if (adapter
->itr_setting
== 3 && adapter
->rx_itr
== lowest_latency
)
2757 adapter
->rx_itr
= low_latency
;
2759 current_itr
= max(adapter
->rx_itr
, adapter
->tx_itr
);
2761 switch (current_itr
) {
2762 /* counts and packets in update_itr are dependent on these numbers */
2763 case lowest_latency
:
2767 new_itr
= 20000; /* aka hwitr = ~200 */
2777 if (new_itr
!= adapter
->itr
) {
2778 /* this attempts to bias the interrupt rate towards Bulk
2779 * by adding intermediate steps when interrupt rate is
2781 new_itr
= new_itr
> adapter
->itr
?
2782 min(adapter
->itr
+ (new_itr
>> 2), new_itr
) :
2784 adapter
->itr
= new_itr
;
2785 ew32(ITR
, 1000000000 / (new_itr
* 256));
2791 #define E1000_TX_FLAGS_CSUM 0x00000001
2792 #define E1000_TX_FLAGS_VLAN 0x00000002
2793 #define E1000_TX_FLAGS_TSO 0x00000004
2794 #define E1000_TX_FLAGS_IPV4 0x00000008
2795 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2796 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2798 static int e1000_tso(struct e1000_adapter
*adapter
,
2799 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2801 struct e1000_context_desc
*context_desc
;
2802 struct e1000_buffer
*buffer_info
;
2805 u16 ipcse
= 0, tucse
, mss
;
2806 u8 ipcss
, ipcso
, tucss
, tucso
, hdr_len
;
2809 if (skb_is_gso(skb
)) {
2810 if (skb_header_cloned(skb
)) {
2811 err
= pskb_expand_head(skb
, 0, 0, GFP_ATOMIC
);
2816 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
2817 mss
= skb_shinfo(skb
)->gso_size
;
2818 if (skb
->protocol
== htons(ETH_P_IP
)) {
2819 struct iphdr
*iph
= ip_hdr(skb
);
2822 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
2826 cmd_length
= E1000_TXD_CMD_IP
;
2827 ipcse
= skb_transport_offset(skb
) - 1;
2828 } else if (skb
->protocol
== htons(ETH_P_IPV6
)) {
2829 ipv6_hdr(skb
)->payload_len
= 0;
2830 tcp_hdr(skb
)->check
=
2831 ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
2832 &ipv6_hdr(skb
)->daddr
,
2836 ipcss
= skb_network_offset(skb
);
2837 ipcso
= (void *)&(ip_hdr(skb
)->check
) - (void *)skb
->data
;
2838 tucss
= skb_transport_offset(skb
);
2839 tucso
= (void *)&(tcp_hdr(skb
)->check
) - (void *)skb
->data
;
2842 cmd_length
|= (E1000_TXD_CMD_DEXT
| E1000_TXD_CMD_TSE
|
2843 E1000_TXD_CMD_TCP
| (skb
->len
- (hdr_len
)));
2845 i
= tx_ring
->next_to_use
;
2846 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2847 buffer_info
= &tx_ring
->buffer_info
[i
];
2849 context_desc
->lower_setup
.ip_fields
.ipcss
= ipcss
;
2850 context_desc
->lower_setup
.ip_fields
.ipcso
= ipcso
;
2851 context_desc
->lower_setup
.ip_fields
.ipcse
= cpu_to_le16(ipcse
);
2852 context_desc
->upper_setup
.tcp_fields
.tucss
= tucss
;
2853 context_desc
->upper_setup
.tcp_fields
.tucso
= tucso
;
2854 context_desc
->upper_setup
.tcp_fields
.tucse
= cpu_to_le16(tucse
);
2855 context_desc
->tcp_seg_setup
.fields
.mss
= cpu_to_le16(mss
);
2856 context_desc
->tcp_seg_setup
.fields
.hdr_len
= hdr_len
;
2857 context_desc
->cmd_and_length
= cpu_to_le32(cmd_length
);
2859 buffer_info
->time_stamp
= jiffies
;
2860 buffer_info
->next_to_watch
= i
;
2862 if (++i
== tx_ring
->count
) i
= 0;
2863 tx_ring
->next_to_use
= i
;
2870 static bool e1000_tx_csum(struct e1000_adapter
*adapter
,
2871 struct e1000_tx_ring
*tx_ring
, struct sk_buff
*skb
)
2873 struct e1000_context_desc
*context_desc
;
2874 struct e1000_buffer
*buffer_info
;
2877 u32 cmd_len
= E1000_TXD_CMD_DEXT
;
2879 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
2882 switch (skb
->protocol
) {
2883 case __constant_htons(ETH_P_IP
):
2884 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
2885 cmd_len
|= E1000_TXD_CMD_TCP
;
2887 case __constant_htons(ETH_P_IPV6
):
2888 /* XXX not handling all IPV6 headers */
2889 if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_TCP
)
2890 cmd_len
|= E1000_TXD_CMD_TCP
;
2893 if (unlikely(net_ratelimit()))
2894 DPRINTK(DRV
, WARNING
,
2895 "checksum_partial proto=%x!\n", skb
->protocol
);
2899 css
= skb_transport_offset(skb
);
2901 i
= tx_ring
->next_to_use
;
2902 buffer_info
= &tx_ring
->buffer_info
[i
];
2903 context_desc
= E1000_CONTEXT_DESC(*tx_ring
, i
);
2905 context_desc
->lower_setup
.ip_config
= 0;
2906 context_desc
->upper_setup
.tcp_fields
.tucss
= css
;
2907 context_desc
->upper_setup
.tcp_fields
.tucso
=
2908 css
+ skb
->csum_offset
;
2909 context_desc
->upper_setup
.tcp_fields
.tucse
= 0;
2910 context_desc
->tcp_seg_setup
.data
= 0;
2911 context_desc
->cmd_and_length
= cpu_to_le32(cmd_len
);
2913 buffer_info
->time_stamp
= jiffies
;
2914 buffer_info
->next_to_watch
= i
;
2916 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2917 tx_ring
->next_to_use
= i
;
2922 #define E1000_MAX_TXD_PWR 12
2923 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2925 static int e1000_tx_map(struct e1000_adapter
*adapter
,
2926 struct e1000_tx_ring
*tx_ring
,
2927 struct sk_buff
*skb
, unsigned int first
,
2928 unsigned int max_per_txd
, unsigned int nr_frags
,
2931 struct e1000_hw
*hw
= &adapter
->hw
;
2932 struct e1000_buffer
*buffer_info
;
2933 unsigned int len
= skb
->len
;
2934 unsigned int offset
= 0, size
, count
= 0, i
;
2936 len
-= skb
->data_len
;
2938 i
= tx_ring
->next_to_use
;
2941 buffer_info
= &tx_ring
->buffer_info
[i
];
2942 size
= min(len
, max_per_txd
);
2943 /* Workaround for Controller erratum --
2944 * descriptor for non-tso packet in a linear SKB that follows a
2945 * tso gets written back prematurely before the data is fully
2946 * DMA'd to the controller */
2947 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&&
2949 tx_ring
->last_tx_tso
= 0;
2953 /* Workaround for premature desc write-backs
2954 * in TSO mode. Append 4-byte sentinel desc */
2955 if (unlikely(mss
&& !nr_frags
&& size
== len
&& size
> 8))
2957 /* work-around for errata 10 and it applies
2958 * to all controllers in PCI-X mode
2959 * The fix is to make sure that the first descriptor of a
2960 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2962 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
2963 (size
> 2015) && count
== 0))
2966 /* Workaround for potential 82544 hang in PCI-X. Avoid
2967 * terminating buffers within evenly-aligned dwords. */
2968 if (unlikely(adapter
->pcix_82544
&&
2969 !((unsigned long)(skb
->data
+ offset
+ size
- 1) & 4) &&
2973 buffer_info
->length
= size
;
2975 pci_map_single(adapter
->pdev
,
2979 buffer_info
->time_stamp
= jiffies
;
2980 buffer_info
->next_to_watch
= i
;
2985 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
2988 for (f
= 0; f
< nr_frags
; f
++) {
2989 struct skb_frag_struct
*frag
;
2991 frag
= &skb_shinfo(skb
)->frags
[f
];
2993 offset
= frag
->page_offset
;
2996 buffer_info
= &tx_ring
->buffer_info
[i
];
2997 size
= min(len
, max_per_txd
);
2998 /* Workaround for premature desc write-backs
2999 * in TSO mode. Append 4-byte sentinel desc */
3000 if (unlikely(mss
&& f
== (nr_frags
-1) && size
== len
&& size
> 8))
3002 /* Workaround for potential 82544 hang in PCI-X.
3003 * Avoid terminating buffers within evenly-aligned
3005 if (unlikely(adapter
->pcix_82544
&&
3006 !((unsigned long)(frag
->page
+offset
+size
-1) & 4) &&
3010 buffer_info
->length
= size
;
3012 pci_map_page(adapter
->pdev
,
3017 buffer_info
->time_stamp
= jiffies
;
3018 buffer_info
->next_to_watch
= i
;
3023 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3027 i
= (i
== 0) ? tx_ring
->count
- 1 : i
- 1;
3028 tx_ring
->buffer_info
[i
].skb
= skb
;
3029 tx_ring
->buffer_info
[first
].next_to_watch
= i
;
3034 static void e1000_tx_queue(struct e1000_adapter
*adapter
,
3035 struct e1000_tx_ring
*tx_ring
, int tx_flags
,
3038 struct e1000_hw
*hw
= &adapter
->hw
;
3039 struct e1000_tx_desc
*tx_desc
= NULL
;
3040 struct e1000_buffer
*buffer_info
;
3041 u32 txd_upper
= 0, txd_lower
= E1000_TXD_CMD_IFCS
;
3044 if (likely(tx_flags
& E1000_TX_FLAGS_TSO
)) {
3045 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
|
3047 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
3049 if (likely(tx_flags
& E1000_TX_FLAGS_IPV4
))
3050 txd_upper
|= E1000_TXD_POPTS_IXSM
<< 8;
3053 if (likely(tx_flags
& E1000_TX_FLAGS_CSUM
)) {
3054 txd_lower
|= E1000_TXD_CMD_DEXT
| E1000_TXD_DTYP_D
;
3055 txd_upper
|= E1000_TXD_POPTS_TXSM
<< 8;
3058 if (unlikely(tx_flags
& E1000_TX_FLAGS_VLAN
)) {
3059 txd_lower
|= E1000_TXD_CMD_VLE
;
3060 txd_upper
|= (tx_flags
& E1000_TX_FLAGS_VLAN_MASK
);
3063 i
= tx_ring
->next_to_use
;
3066 buffer_info
= &tx_ring
->buffer_info
[i
];
3067 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3068 tx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
3069 tx_desc
->lower
.data
=
3070 cpu_to_le32(txd_lower
| buffer_info
->length
);
3071 tx_desc
->upper
.data
= cpu_to_le32(txd_upper
);
3072 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3075 tx_desc
->lower
.data
|= cpu_to_le32(adapter
->txd_cmd
);
3077 /* Force memory writes to complete before letting h/w
3078 * know there are new descriptors to fetch. (Only
3079 * applicable for weak-ordered memory model archs,
3080 * such as IA-64). */
3083 tx_ring
->next_to_use
= i
;
3084 writel(i
, hw
->hw_addr
+ tx_ring
->tdt
);
3085 /* we need this if more than one processor can write to our tail
3086 * at a time, it syncronizes IO on IA64/Altix systems */
3091 * 82547 workaround to avoid controller hang in half-duplex environment.
3092 * The workaround is to avoid queuing a large packet that would span
3093 * the internal Tx FIFO ring boundary by notifying the stack to resend
3094 * the packet at a later time. This gives the Tx FIFO an opportunity to
3095 * flush all packets. When that occurs, we reset the Tx FIFO pointers
3096 * to the beginning of the Tx FIFO.
3099 #define E1000_FIFO_HDR 0x10
3100 #define E1000_82547_PAD_LEN 0x3E0
3102 static int e1000_82547_fifo_workaround(struct e1000_adapter
*adapter
,
3103 struct sk_buff
*skb
)
3105 u32 fifo_space
= adapter
->tx_fifo_size
- adapter
->tx_fifo_head
;
3106 u32 skb_fifo_len
= skb
->len
+ E1000_FIFO_HDR
;
3108 skb_fifo_len
= ALIGN(skb_fifo_len
, E1000_FIFO_HDR
);
3110 if (adapter
->link_duplex
!= HALF_DUPLEX
)
3111 goto no_fifo_stall_required
;
3113 if (atomic_read(&adapter
->tx_fifo_stall
))
3116 if (skb_fifo_len
>= (E1000_82547_PAD_LEN
+ fifo_space
)) {
3117 atomic_set(&adapter
->tx_fifo_stall
, 1);
3121 no_fifo_stall_required
:
3122 adapter
->tx_fifo_head
+= skb_fifo_len
;
3123 if (adapter
->tx_fifo_head
>= adapter
->tx_fifo_size
)
3124 adapter
->tx_fifo_head
-= adapter
->tx_fifo_size
;
3128 #define MINIMUM_DHCP_PACKET_SIZE 282
3129 static int e1000_transfer_dhcp_info(struct e1000_adapter
*adapter
,
3130 struct sk_buff
*skb
)
3132 struct e1000_hw
*hw
= &adapter
->hw
;
3134 if (vlan_tx_tag_present(skb
)) {
3135 if (!((vlan_tx_tag_get(skb
) == hw
->mng_cookie
.vlan_id
) &&
3136 ( hw
->mng_cookie
.status
&
3137 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
)) )
3140 if (skb
->len
> MINIMUM_DHCP_PACKET_SIZE
) {
3141 struct ethhdr
*eth
= (struct ethhdr
*)skb
->data
;
3142 if ((htons(ETH_P_IP
) == eth
->h_proto
)) {
3143 const struct iphdr
*ip
=
3144 (struct iphdr
*)((u8
*)skb
->data
+14);
3145 if (IPPROTO_UDP
== ip
->protocol
) {
3146 struct udphdr
*udp
=
3147 (struct udphdr
*)((u8
*)ip
+
3149 if (ntohs(udp
->dest
) == 67) {
3150 offset
= (u8
*)udp
+ 8 - skb
->data
;
3151 length
= skb
->len
- offset
;
3153 return e1000_mng_write_dhcp_info(hw
,
3163 static int __e1000_maybe_stop_tx(struct net_device
*netdev
, int size
)
3165 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3166 struct e1000_tx_ring
*tx_ring
= adapter
->tx_ring
;
3168 netif_stop_queue(netdev
);
3169 /* Herbert's original patch had:
3170 * smp_mb__after_netif_stop_queue();
3171 * but since that doesn't exist yet, just open code it. */
3174 /* We need to check again in a case another CPU has just
3175 * made room available. */
3176 if (likely(E1000_DESC_UNUSED(tx_ring
) < size
))
3180 netif_start_queue(netdev
);
3181 ++adapter
->restart_queue
;
3185 static int e1000_maybe_stop_tx(struct net_device
*netdev
,
3186 struct e1000_tx_ring
*tx_ring
, int size
)
3188 if (likely(E1000_DESC_UNUSED(tx_ring
) >= size
))
3190 return __e1000_maybe_stop_tx(netdev
, size
);
3193 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3194 static int e1000_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
)
3196 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3197 struct e1000_hw
*hw
= &adapter
->hw
;
3198 struct e1000_tx_ring
*tx_ring
;
3199 unsigned int first
, max_per_txd
= E1000_MAX_DATA_PER_TXD
;
3200 unsigned int max_txd_pwr
= E1000_MAX_TXD_PWR
;
3201 unsigned int tx_flags
= 0;
3202 unsigned int len
= skb
->len
- skb
->data_len
;
3203 unsigned long flags
;
3204 unsigned int nr_frags
;
3210 /* This goes back to the question of how to logically map a tx queue
3211 * to a flow. Right now, performance is impacted slightly negatively
3212 * if using multiple tx queues. If the stack breaks away from a
3213 * single qdisc implementation, we can look at this again. */
3214 tx_ring
= adapter
->tx_ring
;
3216 if (unlikely(skb
->len
<= 0)) {
3217 dev_kfree_skb_any(skb
);
3218 return NETDEV_TX_OK
;
3221 /* 82571 and newer doesn't need the workaround that limited descriptor
3223 if (hw
->mac_type
>= e1000_82571
)
3226 mss
= skb_shinfo(skb
)->gso_size
;
3227 /* The controller does a simple calculation to
3228 * make sure there is enough room in the FIFO before
3229 * initiating the DMA for each buffer. The calc is:
3230 * 4 = ceil(buffer len/mss). To make sure we don't
3231 * overrun the FIFO, adjust the max buffer len if mss
3235 max_per_txd
= min(mss
<< 2, max_per_txd
);
3236 max_txd_pwr
= fls(max_per_txd
) - 1;
3238 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3239 * points to just header, pull a few bytes of payload from
3240 * frags into skb->data */
3241 hdr_len
= skb_transport_offset(skb
) + tcp_hdrlen(skb
);
3242 if (skb
->data_len
&& hdr_len
== len
) {
3243 switch (hw
->mac_type
) {
3244 unsigned int pull_size
;
3246 /* Make sure we have room to chop off 4 bytes,
3247 * and that the end alignment will work out to
3248 * this hardware's requirements
3249 * NOTE: this is a TSO only workaround
3250 * if end byte alignment not correct move us
3251 * into the next dword */
3252 if ((unsigned long)(skb_tail_pointer(skb
) - 1) & 4)
3259 pull_size
= min((unsigned int)4, skb
->data_len
);
3260 if (!__pskb_pull_tail(skb
, pull_size
)) {
3262 "__pskb_pull_tail failed.\n");
3263 dev_kfree_skb_any(skb
);
3264 return NETDEV_TX_OK
;
3266 len
= skb
->len
- skb
->data_len
;
3275 /* reserve a descriptor for the offload context */
3276 if ((mss
) || (skb
->ip_summed
== CHECKSUM_PARTIAL
))
3280 /* Controller Erratum workaround */
3281 if (!skb
->data_len
&& tx_ring
->last_tx_tso
&& !skb_is_gso(skb
))
3284 count
+= TXD_USE_COUNT(len
, max_txd_pwr
);
3286 if (adapter
->pcix_82544
)
3289 /* work-around for errata 10 and it applies to all controllers
3290 * in PCI-X mode, so add one more descriptor to the count
3292 if (unlikely((hw
->bus_type
== e1000_bus_type_pcix
) &&
3296 nr_frags
= skb_shinfo(skb
)->nr_frags
;
3297 for (f
= 0; f
< nr_frags
; f
++)
3298 count
+= TXD_USE_COUNT(skb_shinfo(skb
)->frags
[f
].size
,
3300 if (adapter
->pcix_82544
)
3304 if (hw
->tx_pkt_filtering
&&
3305 (hw
->mac_type
== e1000_82573
))
3306 e1000_transfer_dhcp_info(adapter
, skb
);
3308 if (!spin_trylock_irqsave(&tx_ring
->tx_lock
, flags
))
3309 /* Collision - tell upper layer to requeue */
3310 return NETDEV_TX_LOCKED
;
3312 /* need: count + 2 desc gap to keep tail from touching
3313 * head, otherwise try next time */
3314 if (unlikely(e1000_maybe_stop_tx(netdev
, tx_ring
, count
+ 2))) {
3315 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3316 return NETDEV_TX_BUSY
;
3319 if (unlikely(hw
->mac_type
== e1000_82547
)) {
3320 if (unlikely(e1000_82547_fifo_workaround(adapter
, skb
))) {
3321 netif_stop_queue(netdev
);
3322 mod_timer(&adapter
->tx_fifo_stall_timer
, jiffies
+ 1);
3323 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3324 return NETDEV_TX_BUSY
;
3328 if (unlikely(adapter
->vlgrp
&& vlan_tx_tag_present(skb
))) {
3329 tx_flags
|= E1000_TX_FLAGS_VLAN
;
3330 tx_flags
|= (vlan_tx_tag_get(skb
) << E1000_TX_FLAGS_VLAN_SHIFT
);
3333 first
= tx_ring
->next_to_use
;
3335 tso
= e1000_tso(adapter
, tx_ring
, skb
);
3337 dev_kfree_skb_any(skb
);
3338 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3339 return NETDEV_TX_OK
;
3343 tx_ring
->last_tx_tso
= 1;
3344 tx_flags
|= E1000_TX_FLAGS_TSO
;
3345 } else if (likely(e1000_tx_csum(adapter
, tx_ring
, skb
)))
3346 tx_flags
|= E1000_TX_FLAGS_CSUM
;
3348 /* Old method was to assume IPv4 packet by default if TSO was enabled.
3349 * 82571 hardware supports TSO capabilities for IPv6 as well...
3350 * no longer assume, we must. */
3351 if (likely(skb
->protocol
== htons(ETH_P_IP
)))
3352 tx_flags
|= E1000_TX_FLAGS_IPV4
;
3354 e1000_tx_queue(adapter
, tx_ring
, tx_flags
,
3355 e1000_tx_map(adapter
, tx_ring
, skb
, first
,
3356 max_per_txd
, nr_frags
, mss
));
3358 netdev
->trans_start
= jiffies
;
3360 /* Make sure there is space in the ring for the next send. */
3361 e1000_maybe_stop_tx(netdev
, tx_ring
, MAX_SKB_FRAGS
+ 2);
3363 spin_unlock_irqrestore(&tx_ring
->tx_lock
, flags
);
3364 return NETDEV_TX_OK
;
3368 * e1000_tx_timeout - Respond to a Tx Hang
3369 * @netdev: network interface device structure
3372 static void e1000_tx_timeout(struct net_device
*netdev
)
3374 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3376 /* Do the reset outside of interrupt context */
3377 adapter
->tx_timeout_count
++;
3378 schedule_work(&adapter
->reset_task
);
3381 static void e1000_reset_task(struct work_struct
*work
)
3383 struct e1000_adapter
*adapter
=
3384 container_of(work
, struct e1000_adapter
, reset_task
);
3386 e1000_reinit_locked(adapter
);
3390 * e1000_get_stats - Get System Network Statistics
3391 * @netdev: network interface device structure
3393 * Returns the address of the device statistics structure.
3394 * The statistics are actually updated from the timer callback.
3397 static struct net_device_stats
*e1000_get_stats(struct net_device
*netdev
)
3399 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3401 /* only return the current stats */
3402 return &adapter
->net_stats
;
3406 * e1000_change_mtu - Change the Maximum Transfer Unit
3407 * @netdev: network interface device structure
3408 * @new_mtu: new value for maximum frame size
3410 * Returns 0 on success, negative on failure
3413 static int e1000_change_mtu(struct net_device
*netdev
, int new_mtu
)
3415 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3416 struct e1000_hw
*hw
= &adapter
->hw
;
3417 int max_frame
= new_mtu
+ ENET_HEADER_SIZE
+ ETHERNET_FCS_SIZE
;
3418 u16 eeprom_data
= 0;
3420 if ((max_frame
< MINIMUM_ETHERNET_FRAME_SIZE
) ||
3421 (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
3422 DPRINTK(PROBE
, ERR
, "Invalid MTU setting\n");
3426 /* Adapter-specific max frame size limits. */
3427 switch (hw
->mac_type
) {
3428 case e1000_undefined
... e1000_82542_rev2_1
:
3430 if (max_frame
> MAXIMUM_ETHERNET_FRAME_SIZE
) {
3431 DPRINTK(PROBE
, ERR
, "Jumbo Frames not supported.\n");
3436 /* Jumbo Frames not supported if:
3437 * - this is not an 82573L device
3438 * - ASPM is enabled in any way (0x1A bits 3:2) */
3439 e1000_read_eeprom(hw
, EEPROM_INIT_3GIO_3
, 1,
3441 if ((hw
->device_id
!= E1000_DEV_ID_82573L
) ||
3442 (eeprom_data
& EEPROM_WORD1A_ASPM_MASK
)) {
3443 if (max_frame
> MAXIMUM_ETHERNET_FRAME_SIZE
) {
3445 "Jumbo Frames not supported.\n");
3450 /* ERT will be enabled later to enable wire speed receives */
3452 /* fall through to get support */
3455 case e1000_80003es2lan
:
3456 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3457 if (max_frame
> MAX_STD_JUMBO_FRAME_SIZE
) {
3458 DPRINTK(PROBE
, ERR
, "MTU > 9216 not supported.\n");
3463 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3467 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3468 * means we reserve 2 more, this pushes us to allocate from the next
3470 * i.e. RXBUFFER_2048 --> size-4096 slab */
3472 if (max_frame
<= E1000_RXBUFFER_256
)
3473 adapter
->rx_buffer_len
= E1000_RXBUFFER_256
;
3474 else if (max_frame
<= E1000_RXBUFFER_512
)
3475 adapter
->rx_buffer_len
= E1000_RXBUFFER_512
;
3476 else if (max_frame
<= E1000_RXBUFFER_1024
)
3477 adapter
->rx_buffer_len
= E1000_RXBUFFER_1024
;
3478 else if (max_frame
<= E1000_RXBUFFER_2048
)
3479 adapter
->rx_buffer_len
= E1000_RXBUFFER_2048
;
3480 else if (max_frame
<= E1000_RXBUFFER_4096
)
3481 adapter
->rx_buffer_len
= E1000_RXBUFFER_4096
;
3482 else if (max_frame
<= E1000_RXBUFFER_8192
)
3483 adapter
->rx_buffer_len
= E1000_RXBUFFER_8192
;
3484 else if (max_frame
<= E1000_RXBUFFER_16384
)
3485 adapter
->rx_buffer_len
= E1000_RXBUFFER_16384
;
3487 /* adjust allocation if LPE protects us, and we aren't using SBP */
3488 if (!hw
->tbi_compatibility_on
&&
3489 ((max_frame
== MAXIMUM_ETHERNET_FRAME_SIZE
) ||
3490 (max_frame
== MAXIMUM_ETHERNET_VLAN_SIZE
)))
3491 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
3493 netdev
->mtu
= new_mtu
;
3494 hw
->max_frame_size
= max_frame
;
3496 if (netif_running(netdev
))
3497 e1000_reinit_locked(adapter
);
3503 * e1000_update_stats - Update the board statistics counters
3504 * @adapter: board private structure
3507 void e1000_update_stats(struct e1000_adapter
*adapter
)
3509 struct e1000_hw
*hw
= &adapter
->hw
;
3510 struct pci_dev
*pdev
= adapter
->pdev
;
3511 unsigned long flags
;
3514 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3517 * Prevent stats update while adapter is being reset, or if the pci
3518 * connection is down.
3520 if (adapter
->link_speed
== 0)
3522 if (pci_channel_offline(pdev
))
3525 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
3527 /* these counters are modified from e1000_tbi_adjust_stats,
3528 * called from the interrupt context, so they must only
3529 * be written while holding adapter->stats_lock
3532 adapter
->stats
.crcerrs
+= er32(CRCERRS
);
3533 adapter
->stats
.gprc
+= er32(GPRC
);
3534 adapter
->stats
.gorcl
+= er32(GORCL
);
3535 adapter
->stats
.gorch
+= er32(GORCH
);
3536 adapter
->stats
.bprc
+= er32(BPRC
);
3537 adapter
->stats
.mprc
+= er32(MPRC
);
3538 adapter
->stats
.roc
+= er32(ROC
);
3540 if (hw
->mac_type
!= e1000_ich8lan
) {
3541 adapter
->stats
.prc64
+= er32(PRC64
);
3542 adapter
->stats
.prc127
+= er32(PRC127
);
3543 adapter
->stats
.prc255
+= er32(PRC255
);
3544 adapter
->stats
.prc511
+= er32(PRC511
);
3545 adapter
->stats
.prc1023
+= er32(PRC1023
);
3546 adapter
->stats
.prc1522
+= er32(PRC1522
);
3549 adapter
->stats
.symerrs
+= er32(SYMERRS
);
3550 adapter
->stats
.mpc
+= er32(MPC
);
3551 adapter
->stats
.scc
+= er32(SCC
);
3552 adapter
->stats
.ecol
+= er32(ECOL
);
3553 adapter
->stats
.mcc
+= er32(MCC
);
3554 adapter
->stats
.latecol
+= er32(LATECOL
);
3555 adapter
->stats
.dc
+= er32(DC
);
3556 adapter
->stats
.sec
+= er32(SEC
);
3557 adapter
->stats
.rlec
+= er32(RLEC
);
3558 adapter
->stats
.xonrxc
+= er32(XONRXC
);
3559 adapter
->stats
.xontxc
+= er32(XONTXC
);
3560 adapter
->stats
.xoffrxc
+= er32(XOFFRXC
);
3561 adapter
->stats
.xofftxc
+= er32(XOFFTXC
);
3562 adapter
->stats
.fcruc
+= er32(FCRUC
);
3563 adapter
->stats
.gptc
+= er32(GPTC
);
3564 adapter
->stats
.gotcl
+= er32(GOTCL
);
3565 adapter
->stats
.gotch
+= er32(GOTCH
);
3566 adapter
->stats
.rnbc
+= er32(RNBC
);
3567 adapter
->stats
.ruc
+= er32(RUC
);
3568 adapter
->stats
.rfc
+= er32(RFC
);
3569 adapter
->stats
.rjc
+= er32(RJC
);
3570 adapter
->stats
.torl
+= er32(TORL
);
3571 adapter
->stats
.torh
+= er32(TORH
);
3572 adapter
->stats
.totl
+= er32(TOTL
);
3573 adapter
->stats
.toth
+= er32(TOTH
);
3574 adapter
->stats
.tpr
+= er32(TPR
);
3576 if (hw
->mac_type
!= e1000_ich8lan
) {
3577 adapter
->stats
.ptc64
+= er32(PTC64
);
3578 adapter
->stats
.ptc127
+= er32(PTC127
);
3579 adapter
->stats
.ptc255
+= er32(PTC255
);
3580 adapter
->stats
.ptc511
+= er32(PTC511
);
3581 adapter
->stats
.ptc1023
+= er32(PTC1023
);
3582 adapter
->stats
.ptc1522
+= er32(PTC1522
);
3585 adapter
->stats
.mptc
+= er32(MPTC
);
3586 adapter
->stats
.bptc
+= er32(BPTC
);
3588 /* used for adaptive IFS */
3590 hw
->tx_packet_delta
= er32(TPT
);
3591 adapter
->stats
.tpt
+= hw
->tx_packet_delta
;
3592 hw
->collision_delta
= er32(COLC
);
3593 adapter
->stats
.colc
+= hw
->collision_delta
;
3595 if (hw
->mac_type
>= e1000_82543
) {
3596 adapter
->stats
.algnerrc
+= er32(ALGNERRC
);
3597 adapter
->stats
.rxerrc
+= er32(RXERRC
);
3598 adapter
->stats
.tncrs
+= er32(TNCRS
);
3599 adapter
->stats
.cexterr
+= er32(CEXTERR
);
3600 adapter
->stats
.tsctc
+= er32(TSCTC
);
3601 adapter
->stats
.tsctfc
+= er32(TSCTFC
);
3603 if (hw
->mac_type
> e1000_82547_rev_2
) {
3604 adapter
->stats
.iac
+= er32(IAC
);
3605 adapter
->stats
.icrxoc
+= er32(ICRXOC
);
3607 if (hw
->mac_type
!= e1000_ich8lan
) {
3608 adapter
->stats
.icrxptc
+= er32(ICRXPTC
);
3609 adapter
->stats
.icrxatc
+= er32(ICRXATC
);
3610 adapter
->stats
.ictxptc
+= er32(ICTXPTC
);
3611 adapter
->stats
.ictxatc
+= er32(ICTXATC
);
3612 adapter
->stats
.ictxqec
+= er32(ICTXQEC
);
3613 adapter
->stats
.ictxqmtc
+= er32(ICTXQMTC
);
3614 adapter
->stats
.icrxdmtc
+= er32(ICRXDMTC
);
3618 /* Fill out the OS statistics structure */
3619 adapter
->net_stats
.multicast
= adapter
->stats
.mprc
;
3620 adapter
->net_stats
.collisions
= adapter
->stats
.colc
;
3624 /* RLEC on some newer hardware can be incorrect so build
3625 * our own version based on RUC and ROC */
3626 adapter
->net_stats
.rx_errors
= adapter
->stats
.rxerrc
+
3627 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
3628 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
3629 adapter
->stats
.cexterr
;
3630 adapter
->stats
.rlerrc
= adapter
->stats
.ruc
+ adapter
->stats
.roc
;
3631 adapter
->net_stats
.rx_length_errors
= adapter
->stats
.rlerrc
;
3632 adapter
->net_stats
.rx_crc_errors
= adapter
->stats
.crcerrs
;
3633 adapter
->net_stats
.rx_frame_errors
= adapter
->stats
.algnerrc
;
3634 adapter
->net_stats
.rx_missed_errors
= adapter
->stats
.mpc
;
3637 adapter
->stats
.txerrc
= adapter
->stats
.ecol
+ adapter
->stats
.latecol
;
3638 adapter
->net_stats
.tx_errors
= adapter
->stats
.txerrc
;
3639 adapter
->net_stats
.tx_aborted_errors
= adapter
->stats
.ecol
;
3640 adapter
->net_stats
.tx_window_errors
= adapter
->stats
.latecol
;
3641 adapter
->net_stats
.tx_carrier_errors
= adapter
->stats
.tncrs
;
3642 if (hw
->bad_tx_carr_stats_fd
&&
3643 adapter
->link_duplex
== FULL_DUPLEX
) {
3644 adapter
->net_stats
.tx_carrier_errors
= 0;
3645 adapter
->stats
.tncrs
= 0;
3648 /* Tx Dropped needs to be maintained elsewhere */
3651 if (hw
->media_type
== e1000_media_type_copper
) {
3652 if ((adapter
->link_speed
== SPEED_1000
) &&
3653 (!e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_tmp
))) {
3654 phy_tmp
&= PHY_IDLE_ERROR_COUNT_MASK
;
3655 adapter
->phy_stats
.idle_errors
+= phy_tmp
;
3658 if ((hw
->mac_type
<= e1000_82546
) &&
3659 (hw
->phy_type
== e1000_phy_m88
) &&
3660 !e1000_read_phy_reg(hw
, M88E1000_RX_ERR_CNTR
, &phy_tmp
))
3661 adapter
->phy_stats
.receive_errors
+= phy_tmp
;
3664 /* Management Stats */
3665 if (hw
->has_smbus
) {
3666 adapter
->stats
.mgptc
+= er32(MGTPTC
);
3667 adapter
->stats
.mgprc
+= er32(MGTPRC
);
3668 adapter
->stats
.mgpdc
+= er32(MGTPDC
);
3671 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
3675 * e1000_intr_msi - Interrupt Handler
3676 * @irq: interrupt number
3677 * @data: pointer to a network interface device structure
3680 static irqreturn_t
e1000_intr_msi(int irq
, void *data
)
3682 struct net_device
*netdev
= data
;
3683 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3684 struct e1000_hw
*hw
= &adapter
->hw
;
3685 u32 icr
= er32(ICR
);
3687 /* in NAPI mode read ICR disables interrupts using IAM */
3689 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
3690 hw
->get_link_status
= 1;
3691 /* 80003ES2LAN workaround-- For packet buffer work-around on
3692 * link down event; disable receives here in the ISR and reset
3693 * adapter in watchdog */
3694 if (netif_carrier_ok(netdev
) &&
3695 (hw
->mac_type
== e1000_80003es2lan
)) {
3696 /* disable receives */
3697 u32 rctl
= er32(RCTL
);
3698 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
3700 /* guard against interrupt when we're going down */
3701 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3702 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3705 if (likely(netif_rx_schedule_prep(netdev
, &adapter
->napi
))) {
3706 adapter
->total_tx_bytes
= 0;
3707 adapter
->total_tx_packets
= 0;
3708 adapter
->total_rx_bytes
= 0;
3709 adapter
->total_rx_packets
= 0;
3710 __netif_rx_schedule(netdev
, &adapter
->napi
);
3712 e1000_irq_enable(adapter
);
3718 * e1000_intr - Interrupt Handler
3719 * @irq: interrupt number
3720 * @data: pointer to a network interface device structure
3723 static irqreturn_t
e1000_intr(int irq
, void *data
)
3725 struct net_device
*netdev
= data
;
3726 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
3727 struct e1000_hw
*hw
= &adapter
->hw
;
3728 u32 rctl
, icr
= er32(ICR
);
3731 return IRQ_NONE
; /* Not our interrupt */
3733 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
3734 * not set, then the adapter didn't send an interrupt */
3735 if (unlikely(hw
->mac_type
>= e1000_82571
&&
3736 !(icr
& E1000_ICR_INT_ASSERTED
)))
3739 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
3740 * need for the IMC write */
3742 if (unlikely(icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
))) {
3743 hw
->get_link_status
= 1;
3744 /* 80003ES2LAN workaround--
3745 * For packet buffer work-around on link down event;
3746 * disable receives here in the ISR and
3747 * reset adapter in watchdog
3749 if (netif_carrier_ok(netdev
) &&
3750 (hw
->mac_type
== e1000_80003es2lan
)) {
3751 /* disable receives */
3753 ew32(RCTL
, rctl
& ~E1000_RCTL_EN
);
3755 /* guard against interrupt when we're going down */
3756 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
3757 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3760 if (unlikely(hw
->mac_type
< e1000_82571
)) {
3761 /* disable interrupts, without the synchronize_irq bit */
3763 E1000_WRITE_FLUSH();
3765 if (likely(netif_rx_schedule_prep(netdev
, &adapter
->napi
))) {
3766 adapter
->total_tx_bytes
= 0;
3767 adapter
->total_tx_packets
= 0;
3768 adapter
->total_rx_bytes
= 0;
3769 adapter
->total_rx_packets
= 0;
3770 __netif_rx_schedule(netdev
, &adapter
->napi
);
3772 /* this really should not happen! if it does it is basically a
3773 * bug, but not a hard error, so enable ints and continue */
3774 e1000_irq_enable(adapter
);
3780 * e1000_clean - NAPI Rx polling callback
3781 * @adapter: board private structure
3783 static int e1000_clean(struct napi_struct
*napi
, int budget
)
3785 struct e1000_adapter
*adapter
= container_of(napi
, struct e1000_adapter
, napi
);
3786 struct net_device
*poll_dev
= adapter
->netdev
;
3787 int tx_cleaned
= 0, work_done
= 0;
3789 /* Must NOT use netdev_priv macro here. */
3790 adapter
= poll_dev
->priv
;
3792 /* e1000_clean is called per-cpu. This lock protects
3793 * tx_ring[0] from being cleaned by multiple cpus
3794 * simultaneously. A failure obtaining the lock means
3795 * tx_ring[0] is currently being cleaned anyway. */
3796 if (spin_trylock(&adapter
->tx_queue_lock
)) {
3797 tx_cleaned
= e1000_clean_tx_irq(adapter
,
3798 &adapter
->tx_ring
[0]);
3799 spin_unlock(&adapter
->tx_queue_lock
);
3802 adapter
->clean_rx(adapter
, &adapter
->rx_ring
[0],
3803 &work_done
, budget
);
3808 /* If budget not fully consumed, exit the polling mode */
3809 if (work_done
< budget
) {
3810 if (likely(adapter
->itr_setting
& 3))
3811 e1000_set_itr(adapter
);
3812 netif_rx_complete(poll_dev
, napi
);
3813 e1000_irq_enable(adapter
);
3820 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3821 * @adapter: board private structure
3823 static bool e1000_clean_tx_irq(struct e1000_adapter
*adapter
,
3824 struct e1000_tx_ring
*tx_ring
)
3826 struct e1000_hw
*hw
= &adapter
->hw
;
3827 struct net_device
*netdev
= adapter
->netdev
;
3828 struct e1000_tx_desc
*tx_desc
, *eop_desc
;
3829 struct e1000_buffer
*buffer_info
;
3830 unsigned int i
, eop
;
3831 unsigned int count
= 0;
3832 bool cleaned
= false;
3833 unsigned int total_tx_bytes
=0, total_tx_packets
=0;
3835 i
= tx_ring
->next_to_clean
;
3836 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3837 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3839 while (eop_desc
->upper
.data
& cpu_to_le32(E1000_TXD_STAT_DD
)) {
3840 for (cleaned
= false; !cleaned
; ) {
3841 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3842 buffer_info
= &tx_ring
->buffer_info
[i
];
3843 cleaned
= (i
== eop
);
3846 struct sk_buff
*skb
= buffer_info
->skb
;
3847 unsigned int segs
, bytecount
;
3848 segs
= skb_shinfo(skb
)->gso_segs
?: 1;
3849 /* multiply data chunks by size of headers */
3850 bytecount
= ((segs
- 1) * skb_headlen(skb
)) +
3852 total_tx_packets
+= segs
;
3853 total_tx_bytes
+= bytecount
;
3855 e1000_unmap_and_free_tx_resource(adapter
, buffer_info
);
3856 tx_desc
->upper
.data
= 0;
3858 if (unlikely(++i
== tx_ring
->count
)) i
= 0;
3861 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
3862 eop_desc
= E1000_TX_DESC(*tx_ring
, eop
);
3863 #define E1000_TX_WEIGHT 64
3864 /* weight of a sort for tx, to avoid endless transmit cleanup */
3865 if (count
++ == E1000_TX_WEIGHT
)
3869 tx_ring
->next_to_clean
= i
;
3871 #define TX_WAKE_THRESHOLD 32
3872 if (unlikely(cleaned
&& netif_carrier_ok(netdev
) &&
3873 E1000_DESC_UNUSED(tx_ring
) >= TX_WAKE_THRESHOLD
)) {
3874 /* Make sure that anybody stopping the queue after this
3875 * sees the new next_to_clean.
3878 if (netif_queue_stopped(netdev
)) {
3879 netif_wake_queue(netdev
);
3880 ++adapter
->restart_queue
;
3884 if (adapter
->detect_tx_hung
) {
3885 /* Detect a transmit hang in hardware, this serializes the
3886 * check with the clearing of time_stamp and movement of i */
3887 adapter
->detect_tx_hung
= false;
3888 if (tx_ring
->buffer_info
[eop
].dma
&&
3889 time_after(jiffies
, tx_ring
->buffer_info
[eop
].time_stamp
+
3890 (adapter
->tx_timeout_factor
* HZ
))
3891 && !(er32(STATUS
) & E1000_STATUS_TXOFF
)) {
3893 /* detected Tx unit hang */
3894 DPRINTK(DRV
, ERR
, "Detected Tx Unit Hang\n"
3898 " next_to_use <%x>\n"
3899 " next_to_clean <%x>\n"
3900 "buffer_info[next_to_clean]\n"
3901 " time_stamp <%lx>\n"
3902 " next_to_watch <%x>\n"
3904 " next_to_watch.status <%x>\n",
3905 (unsigned long)((tx_ring
- adapter
->tx_ring
) /
3906 sizeof(struct e1000_tx_ring
)),
3907 readl(hw
->hw_addr
+ tx_ring
->tdh
),
3908 readl(hw
->hw_addr
+ tx_ring
->tdt
),
3909 tx_ring
->next_to_use
,
3910 tx_ring
->next_to_clean
,
3911 tx_ring
->buffer_info
[eop
].time_stamp
,
3914 eop_desc
->upper
.fields
.status
);
3915 netif_stop_queue(netdev
);
3918 adapter
->total_tx_bytes
+= total_tx_bytes
;
3919 adapter
->total_tx_packets
+= total_tx_packets
;
3920 adapter
->net_stats
.tx_bytes
+= total_tx_bytes
;
3921 adapter
->net_stats
.tx_packets
+= total_tx_packets
;
3926 * e1000_rx_checksum - Receive Checksum Offload for 82543
3927 * @adapter: board private structure
3928 * @status_err: receive descriptor status and error fields
3929 * @csum: receive descriptor csum field
3930 * @sk_buff: socket buffer with received data
3933 static void e1000_rx_checksum(struct e1000_adapter
*adapter
, u32 status_err
,
3934 u32 csum
, struct sk_buff
*skb
)
3936 struct e1000_hw
*hw
= &adapter
->hw
;
3937 u16 status
= (u16
)status_err
;
3938 u8 errors
= (u8
)(status_err
>> 24);
3939 skb
->ip_summed
= CHECKSUM_NONE
;
3941 /* 82543 or newer only */
3942 if (unlikely(hw
->mac_type
< e1000_82543
)) return;
3943 /* Ignore Checksum bit is set */
3944 if (unlikely(status
& E1000_RXD_STAT_IXSM
)) return;
3945 /* TCP/UDP checksum error bit is set */
3946 if (unlikely(errors
& E1000_RXD_ERR_TCPE
)) {
3947 /* let the stack verify checksum errors */
3948 adapter
->hw_csum_err
++;
3951 /* TCP/UDP Checksum has not been calculated */
3952 if (hw
->mac_type
<= e1000_82547_rev_2
) {
3953 if (!(status
& E1000_RXD_STAT_TCPCS
))
3956 if (!(status
& (E1000_RXD_STAT_TCPCS
| E1000_RXD_STAT_UDPCS
)))
3959 /* It must be a TCP or UDP packet with a valid checksum */
3960 if (likely(status
& E1000_RXD_STAT_TCPCS
)) {
3961 /* TCP checksum is good */
3962 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
3963 } else if (hw
->mac_type
> e1000_82547_rev_2
) {
3964 /* IP fragment with UDP payload */
3965 /* Hardware complements the payload checksum, so we undo it
3966 * and then put the value in host order for further stack use.
3968 __sum16 sum
= (__force __sum16
)htons(csum
);
3969 skb
->csum
= csum_unfold(~sum
);
3970 skb
->ip_summed
= CHECKSUM_COMPLETE
;
3972 adapter
->hw_csum_good
++;
3976 * e1000_clean_rx_irq - Send received data up the network stack; legacy
3977 * @adapter: board private structure
3979 static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter
,
3980 struct e1000_rx_ring
*rx_ring
,
3981 int *work_done
, int work_to_do
)
3983 struct e1000_hw
*hw
= &adapter
->hw
;
3984 struct net_device
*netdev
= adapter
->netdev
;
3985 struct pci_dev
*pdev
= adapter
->pdev
;
3986 struct e1000_rx_desc
*rx_desc
, *next_rxd
;
3987 struct e1000_buffer
*buffer_info
, *next_buffer
;
3988 unsigned long flags
;
3992 int cleaned_count
= 0;
3993 bool cleaned
= false;
3994 unsigned int total_rx_bytes
=0, total_rx_packets
=0;
3996 i
= rx_ring
->next_to_clean
;
3997 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
3998 buffer_info
= &rx_ring
->buffer_info
[i
];
4000 while (rx_desc
->status
& E1000_RXD_STAT_DD
) {
4001 struct sk_buff
*skb
;
4004 if (*work_done
>= work_to_do
)
4008 status
= rx_desc
->status
;
4009 skb
= buffer_info
->skb
;
4010 buffer_info
->skb
= NULL
;
4012 prefetch(skb
->data
- NET_IP_ALIGN
);
4014 if (++i
== rx_ring
->count
) i
= 0;
4015 next_rxd
= E1000_RX_DESC(*rx_ring
, i
);
4018 next_buffer
= &rx_ring
->buffer_info
[i
];
4022 pci_unmap_single(pdev
,
4024 buffer_info
->length
,
4025 PCI_DMA_FROMDEVICE
);
4027 length
= le16_to_cpu(rx_desc
->length
);
4029 if (unlikely(!(status
& E1000_RXD_STAT_EOP
))) {
4030 /* All receives must fit into a single buffer */
4031 E1000_DBG("%s: Receive packet consumed multiple"
4032 " buffers\n", netdev
->name
);
4034 buffer_info
->skb
= skb
;
4038 if (unlikely(rx_desc
->errors
& E1000_RXD_ERR_FRAME_ERR_MASK
)) {
4039 last_byte
= *(skb
->data
+ length
- 1);
4040 if (TBI_ACCEPT(hw
, status
, rx_desc
->errors
, length
,
4042 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4043 e1000_tbi_adjust_stats(hw
, &adapter
->stats
,
4045 spin_unlock_irqrestore(&adapter
->stats_lock
,
4050 buffer_info
->skb
= skb
;
4055 /* adjust length to remove Ethernet CRC, this must be
4056 * done after the TBI_ACCEPT workaround above */
4059 /* probably a little skewed due to removing CRC */
4060 total_rx_bytes
+= length
;
4063 /* code added for copybreak, this should improve
4064 * performance for small packets with large amounts
4065 * of reassembly being done in the stack */
4066 if (length
< copybreak
) {
4067 struct sk_buff
*new_skb
=
4068 netdev_alloc_skb(netdev
, length
+ NET_IP_ALIGN
);
4070 skb_reserve(new_skb
, NET_IP_ALIGN
);
4071 skb_copy_to_linear_data_offset(new_skb
,
4077 /* save the skb in buffer_info as good */
4078 buffer_info
->skb
= skb
;
4081 /* else just continue with the old one */
4083 /* end copybreak code */
4084 skb_put(skb
, length
);
4086 /* Receive Checksum Offload */
4087 e1000_rx_checksum(adapter
,
4089 ((u32
)(rx_desc
->errors
) << 24),
4090 le16_to_cpu(rx_desc
->csum
), skb
);
4092 skb
->protocol
= eth_type_trans(skb
, netdev
);
4094 if (unlikely(adapter
->vlgrp
&&
4095 (status
& E1000_RXD_STAT_VP
))) {
4096 vlan_hwaccel_receive_skb(skb
, adapter
->vlgrp
,
4097 le16_to_cpu(rx_desc
->special
));
4099 netif_receive_skb(skb
);
4103 rx_desc
->status
= 0;
4105 /* return some buffers to hardware, one at a time is too slow */
4106 if (unlikely(cleaned_count
>= E1000_RX_BUFFER_WRITE
)) {
4107 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4111 /* use prefetched values */
4113 buffer_info
= next_buffer
;
4115 rx_ring
->next_to_clean
= i
;
4117 cleaned_count
= E1000_DESC_UNUSED(rx_ring
);
4119 adapter
->alloc_rx_buf(adapter
, rx_ring
, cleaned_count
);
4121 adapter
->total_rx_packets
+= total_rx_packets
;
4122 adapter
->total_rx_bytes
+= total_rx_bytes
;
4123 adapter
->net_stats
.rx_bytes
+= total_rx_bytes
;
4124 adapter
->net_stats
.rx_packets
+= total_rx_packets
;
4129 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4130 * @adapter: address of board private structure
4133 static void e1000_alloc_rx_buffers(struct e1000_adapter
*adapter
,
4134 struct e1000_rx_ring
*rx_ring
,
4137 struct e1000_hw
*hw
= &adapter
->hw
;
4138 struct net_device
*netdev
= adapter
->netdev
;
4139 struct pci_dev
*pdev
= adapter
->pdev
;
4140 struct e1000_rx_desc
*rx_desc
;
4141 struct e1000_buffer
*buffer_info
;
4142 struct sk_buff
*skb
;
4144 unsigned int bufsz
= adapter
->rx_buffer_len
+ NET_IP_ALIGN
;
4146 i
= rx_ring
->next_to_use
;
4147 buffer_info
= &rx_ring
->buffer_info
[i
];
4149 while (cleaned_count
--) {
4150 skb
= buffer_info
->skb
;
4156 skb
= netdev_alloc_skb(netdev
, bufsz
);
4157 if (unlikely(!skb
)) {
4158 /* Better luck next round */
4159 adapter
->alloc_rx_buff_failed
++;
4163 /* Fix for errata 23, can't cross 64kB boundary */
4164 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4165 struct sk_buff
*oldskb
= skb
;
4166 DPRINTK(RX_ERR
, ERR
, "skb align check failed: %u bytes "
4167 "at %p\n", bufsz
, skb
->data
);
4168 /* Try again, without freeing the previous */
4169 skb
= netdev_alloc_skb(netdev
, bufsz
);
4170 /* Failed allocation, critical failure */
4172 dev_kfree_skb(oldskb
);
4176 if (!e1000_check_64k_bound(adapter
, skb
->data
, bufsz
)) {
4179 dev_kfree_skb(oldskb
);
4180 break; /* while !buffer_info->skb */
4183 /* Use new allocation */
4184 dev_kfree_skb(oldskb
);
4186 /* Make buffer alignment 2 beyond a 16 byte boundary
4187 * this will result in a 16 byte aligned IP header after
4188 * the 14 byte MAC header is removed
4190 skb_reserve(skb
, NET_IP_ALIGN
);
4192 buffer_info
->skb
= skb
;
4193 buffer_info
->length
= adapter
->rx_buffer_len
;
4195 buffer_info
->dma
= pci_map_single(pdev
,
4197 adapter
->rx_buffer_len
,
4198 PCI_DMA_FROMDEVICE
);
4200 /* Fix for errata 23, can't cross 64kB boundary */
4201 if (!e1000_check_64k_bound(adapter
,
4202 (void *)(unsigned long)buffer_info
->dma
,
4203 adapter
->rx_buffer_len
)) {
4204 DPRINTK(RX_ERR
, ERR
,
4205 "dma align check failed: %u bytes at %p\n",
4206 adapter
->rx_buffer_len
,
4207 (void *)(unsigned long)buffer_info
->dma
);
4209 buffer_info
->skb
= NULL
;
4211 pci_unmap_single(pdev
, buffer_info
->dma
,
4212 adapter
->rx_buffer_len
,
4213 PCI_DMA_FROMDEVICE
);
4215 break; /* while !buffer_info->skb */
4217 rx_desc
= E1000_RX_DESC(*rx_ring
, i
);
4218 rx_desc
->buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4220 if (unlikely(++i
== rx_ring
->count
))
4222 buffer_info
= &rx_ring
->buffer_info
[i
];
4225 if (likely(rx_ring
->next_to_use
!= i
)) {
4226 rx_ring
->next_to_use
= i
;
4227 if (unlikely(i
-- == 0))
4228 i
= (rx_ring
->count
- 1);
4230 /* Force memory writes to complete before letting h/w
4231 * know there are new descriptors to fetch. (Only
4232 * applicable for weak-ordered memory model archs,
4233 * such as IA-64). */
4235 writel(i
, hw
->hw_addr
+ rx_ring
->rdt
);
4240 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4244 static void e1000_smartspeed(struct e1000_adapter
*adapter
)
4246 struct e1000_hw
*hw
= &adapter
->hw
;
4250 if ((hw
->phy_type
!= e1000_phy_igp
) || !hw
->autoneg
||
4251 !(hw
->autoneg_advertised
& ADVERTISE_1000_FULL
))
4254 if (adapter
->smartspeed
== 0) {
4255 /* If Master/Slave config fault is asserted twice,
4256 * we assume back-to-back */
4257 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4258 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4259 e1000_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_status
);
4260 if (!(phy_status
& SR_1000T_MS_CONFIG_FAULT
)) return;
4261 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4262 if (phy_ctrl
& CR_1000T_MS_ENABLE
) {
4263 phy_ctrl
&= ~CR_1000T_MS_ENABLE
;
4264 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
,
4266 adapter
->smartspeed
++;
4267 if (!e1000_phy_setup_autoneg(hw
) &&
4268 !e1000_read_phy_reg(hw
, PHY_CTRL
,
4270 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4271 MII_CR_RESTART_AUTO_NEG
);
4272 e1000_write_phy_reg(hw
, PHY_CTRL
,
4277 } else if (adapter
->smartspeed
== E1000_SMARTSPEED_DOWNSHIFT
) {
4278 /* If still no link, perhaps using 2/3 pair cable */
4279 e1000_read_phy_reg(hw
, PHY_1000T_CTRL
, &phy_ctrl
);
4280 phy_ctrl
|= CR_1000T_MS_ENABLE
;
4281 e1000_write_phy_reg(hw
, PHY_1000T_CTRL
, phy_ctrl
);
4282 if (!e1000_phy_setup_autoneg(hw
) &&
4283 !e1000_read_phy_reg(hw
, PHY_CTRL
, &phy_ctrl
)) {
4284 phy_ctrl
|= (MII_CR_AUTO_NEG_EN
|
4285 MII_CR_RESTART_AUTO_NEG
);
4286 e1000_write_phy_reg(hw
, PHY_CTRL
, phy_ctrl
);
4289 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4290 if (adapter
->smartspeed
++ == E1000_SMARTSPEED_MAX
)
4291 adapter
->smartspeed
= 0;
4301 static int e1000_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
4307 return e1000_mii_ioctl(netdev
, ifr
, cmd
);
4320 static int e1000_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
,
4323 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4324 struct e1000_hw
*hw
= &adapter
->hw
;
4325 struct mii_ioctl_data
*data
= if_mii(ifr
);
4329 unsigned long flags
;
4331 if (hw
->media_type
!= e1000_media_type_copper
)
4336 data
->phy_id
= hw
->phy_addr
;
4339 if (!capable(CAP_NET_ADMIN
))
4341 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4342 if (e1000_read_phy_reg(hw
, data
->reg_num
& 0x1F,
4344 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4347 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4350 if (!capable(CAP_NET_ADMIN
))
4352 if (data
->reg_num
& ~(0x1F))
4354 mii_reg
= data
->val_in
;
4355 spin_lock_irqsave(&adapter
->stats_lock
, flags
);
4356 if (e1000_write_phy_reg(hw
, data
->reg_num
,
4358 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4361 spin_unlock_irqrestore(&adapter
->stats_lock
, flags
);
4362 if (hw
->media_type
== e1000_media_type_copper
) {
4363 switch (data
->reg_num
) {
4365 if (mii_reg
& MII_CR_POWER_DOWN
)
4367 if (mii_reg
& MII_CR_AUTO_NEG_EN
) {
4369 hw
->autoneg_advertised
= 0x2F;
4372 spddplx
= SPEED_1000
;
4373 else if (mii_reg
& 0x2000)
4374 spddplx
= SPEED_100
;
4377 spddplx
+= (mii_reg
& 0x100)
4380 retval
= e1000_set_spd_dplx(adapter
,
4385 if (netif_running(adapter
->netdev
))
4386 e1000_reinit_locked(adapter
);
4388 e1000_reset(adapter
);
4390 case M88E1000_PHY_SPEC_CTRL
:
4391 case M88E1000_EXT_PHY_SPEC_CTRL
:
4392 if (e1000_phy_reset(hw
))
4397 switch (data
->reg_num
) {
4399 if (mii_reg
& MII_CR_POWER_DOWN
)
4401 if (netif_running(adapter
->netdev
))
4402 e1000_reinit_locked(adapter
);
4404 e1000_reset(adapter
);
4412 return E1000_SUCCESS
;
4415 void e1000_pci_set_mwi(struct e1000_hw
*hw
)
4417 struct e1000_adapter
*adapter
= hw
->back
;
4418 int ret_val
= pci_set_mwi(adapter
->pdev
);
4421 DPRINTK(PROBE
, ERR
, "Error in setting MWI\n");
4424 void e1000_pci_clear_mwi(struct e1000_hw
*hw
)
4426 struct e1000_adapter
*adapter
= hw
->back
;
4428 pci_clear_mwi(adapter
->pdev
);
4431 int e1000_pcix_get_mmrbc(struct e1000_hw
*hw
)
4433 struct e1000_adapter
*adapter
= hw
->back
;
4434 return pcix_get_mmrbc(adapter
->pdev
);
4437 void e1000_pcix_set_mmrbc(struct e1000_hw
*hw
, int mmrbc
)
4439 struct e1000_adapter
*adapter
= hw
->back
;
4440 pcix_set_mmrbc(adapter
->pdev
, mmrbc
);
4443 s32
e1000_read_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
4445 struct e1000_adapter
*adapter
= hw
->back
;
4448 cap_offset
= pci_find_capability(adapter
->pdev
, PCI_CAP_ID_EXP
);
4450 return -E1000_ERR_CONFIG
;
4452 pci_read_config_word(adapter
->pdev
, cap_offset
+ reg
, value
);
4454 return E1000_SUCCESS
;
4457 void e1000_io_write(struct e1000_hw
*hw
, unsigned long port
, u32 value
)
4462 static void e1000_vlan_rx_register(struct net_device
*netdev
,
4463 struct vlan_group
*grp
)
4465 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4466 struct e1000_hw
*hw
= &adapter
->hw
;
4469 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4470 e1000_irq_disable(adapter
);
4471 adapter
->vlgrp
= grp
;
4474 /* enable VLAN tag insert/strip */
4476 ctrl
|= E1000_CTRL_VME
;
4479 if (adapter
->hw
.mac_type
!= e1000_ich8lan
) {
4480 /* enable VLAN receive filtering */
4482 rctl
&= ~E1000_RCTL_CFIEN
;
4484 e1000_update_mng_vlan(adapter
);
4487 /* disable VLAN tag insert/strip */
4489 ctrl
&= ~E1000_CTRL_VME
;
4492 if (adapter
->hw
.mac_type
!= e1000_ich8lan
) {
4493 if (adapter
->mng_vlan_id
!=
4494 (u16
)E1000_MNG_VLAN_NONE
) {
4495 e1000_vlan_rx_kill_vid(netdev
,
4496 adapter
->mng_vlan_id
);
4497 adapter
->mng_vlan_id
= E1000_MNG_VLAN_NONE
;
4502 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4503 e1000_irq_enable(adapter
);
4506 static void e1000_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
)
4508 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4509 struct e1000_hw
*hw
= &adapter
->hw
;
4512 if ((hw
->mng_cookie
.status
&
4513 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
4514 (vid
== adapter
->mng_vlan_id
))
4516 /* add VID to filter table */
4517 index
= (vid
>> 5) & 0x7F;
4518 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4519 vfta
|= (1 << (vid
& 0x1F));
4520 e1000_write_vfta(hw
, index
, vfta
);
4523 static void e1000_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
)
4525 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4526 struct e1000_hw
*hw
= &adapter
->hw
;
4529 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4530 e1000_irq_disable(adapter
);
4531 vlan_group_set_device(adapter
->vlgrp
, vid
, NULL
);
4532 if (!test_bit(__E1000_DOWN
, &adapter
->flags
))
4533 e1000_irq_enable(adapter
);
4535 if ((hw
->mng_cookie
.status
&
4536 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT
) &&
4537 (vid
== adapter
->mng_vlan_id
)) {
4538 /* release control to f/w */
4539 e1000_release_hw_control(adapter
);
4543 /* remove VID from filter table */
4544 index
= (vid
>> 5) & 0x7F;
4545 vfta
= E1000_READ_REG_ARRAY(hw
, VFTA
, index
);
4546 vfta
&= ~(1 << (vid
& 0x1F));
4547 e1000_write_vfta(hw
, index
, vfta
);
4550 static void e1000_restore_vlan(struct e1000_adapter
*adapter
)
4552 e1000_vlan_rx_register(adapter
->netdev
, adapter
->vlgrp
);
4554 if (adapter
->vlgrp
) {
4556 for (vid
= 0; vid
< VLAN_GROUP_ARRAY_LEN
; vid
++) {
4557 if (!vlan_group_get_device(adapter
->vlgrp
, vid
))
4559 e1000_vlan_rx_add_vid(adapter
->netdev
, vid
);
4564 int e1000_set_spd_dplx(struct e1000_adapter
*adapter
, u16 spddplx
)
4566 struct e1000_hw
*hw
= &adapter
->hw
;
4570 /* Fiber NICs only allow 1000 gbps Full duplex */
4571 if ((hw
->media_type
== e1000_media_type_fiber
) &&
4572 spddplx
!= (SPEED_1000
+ DUPLEX_FULL
)) {
4573 DPRINTK(PROBE
, ERR
, "Unsupported Speed/Duplex configuration\n");
4578 case SPEED_10
+ DUPLEX_HALF
:
4579 hw
->forced_speed_duplex
= e1000_10_half
;
4581 case SPEED_10
+ DUPLEX_FULL
:
4582 hw
->forced_speed_duplex
= e1000_10_full
;
4584 case SPEED_100
+ DUPLEX_HALF
:
4585 hw
->forced_speed_duplex
= e1000_100_half
;
4587 case SPEED_100
+ DUPLEX_FULL
:
4588 hw
->forced_speed_duplex
= e1000_100_full
;
4590 case SPEED_1000
+ DUPLEX_FULL
:
4592 hw
->autoneg_advertised
= ADVERTISE_1000_FULL
;
4594 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
4596 DPRINTK(PROBE
, ERR
, "Unsupported Speed/Duplex configuration\n");
4602 static int e1000_suspend(struct pci_dev
*pdev
, pm_message_t state
)
4604 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4605 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4606 struct e1000_hw
*hw
= &adapter
->hw
;
4607 u32 ctrl
, ctrl_ext
, rctl
, status
;
4608 u32 wufc
= adapter
->wol
;
4613 netif_device_detach(netdev
);
4615 if (netif_running(netdev
)) {
4616 WARN_ON(test_bit(__E1000_RESETTING
, &adapter
->flags
));
4617 e1000_down(adapter
);
4621 retval
= pci_save_state(pdev
);
4626 status
= er32(STATUS
);
4627 if (status
& E1000_STATUS_LU
)
4628 wufc
&= ~E1000_WUFC_LNKC
;
4631 e1000_setup_rctl(adapter
);
4632 e1000_set_rx_mode(netdev
);
4634 /* turn on all-multi mode if wake on multicast is enabled */
4635 if (wufc
& E1000_WUFC_MC
) {
4637 rctl
|= E1000_RCTL_MPE
;
4641 if (hw
->mac_type
>= e1000_82540
) {
4643 /* advertise wake from D3Cold */
4644 #define E1000_CTRL_ADVD3WUC 0x00100000
4645 /* phy power management enable */
4646 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4647 ctrl
|= E1000_CTRL_ADVD3WUC
|
4648 E1000_CTRL_EN_PHY_PWR_MGMT
;
4652 if (hw
->media_type
== e1000_media_type_fiber
||
4653 hw
->media_type
== e1000_media_type_internal_serdes
) {
4654 /* keep the laser running in D3 */
4655 ctrl_ext
= er32(CTRL_EXT
);
4656 ctrl_ext
|= E1000_CTRL_EXT_SDP7_DATA
;
4657 ew32(CTRL_EXT
, ctrl_ext
);
4660 /* Allow time for pending master requests to run */
4661 e1000_disable_pciex_master(hw
);
4663 ew32(WUC
, E1000_WUC_PME_EN
);
4665 pci_enable_wake(pdev
, PCI_D3hot
, 1);
4666 pci_enable_wake(pdev
, PCI_D3cold
, 1);
4670 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4671 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4674 e1000_release_manageability(adapter
);
4676 /* make sure adapter isn't asleep if manageability is enabled */
4677 if (adapter
->en_mng_pt
) {
4678 pci_enable_wake(pdev
, PCI_D3hot
, 1);
4679 pci_enable_wake(pdev
, PCI_D3cold
, 1);
4682 if (hw
->phy_type
== e1000_phy_igp_3
)
4683 e1000_phy_powerdown_workaround(hw
);
4685 if (netif_running(netdev
))
4686 e1000_free_irq(adapter
);
4688 /* Release control of h/w to f/w. If f/w is AMT enabled, this
4689 * would have already happened in close and is redundant. */
4690 e1000_release_hw_control(adapter
);
4692 pci_disable_device(pdev
);
4694 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
4700 static int e1000_resume(struct pci_dev
*pdev
)
4702 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4703 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4704 struct e1000_hw
*hw
= &adapter
->hw
;
4707 pci_set_power_state(pdev
, PCI_D0
);
4708 pci_restore_state(pdev
);
4710 if (adapter
->need_ioport
)
4711 err
= pci_enable_device(pdev
);
4713 err
= pci_enable_device_mem(pdev
);
4715 printk(KERN_ERR
"e1000: Cannot enable PCI device from suspend\n");
4718 pci_set_master(pdev
);
4720 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4721 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4723 if (netif_running(netdev
)) {
4724 err
= e1000_request_irq(adapter
);
4729 e1000_power_up_phy(adapter
);
4730 e1000_reset(adapter
);
4733 e1000_init_manageability(adapter
);
4735 if (netif_running(netdev
))
4738 netif_device_attach(netdev
);
4740 /* If the controller is 82573 and f/w is AMT, do not set
4741 * DRV_LOAD until the interface is up. For all other cases,
4742 * let the f/w know that the h/w is now under the control
4744 if (hw
->mac_type
!= e1000_82573
||
4745 !e1000_check_mng_mode(hw
))
4746 e1000_get_hw_control(adapter
);
4752 static void e1000_shutdown(struct pci_dev
*pdev
)
4754 e1000_suspend(pdev
, PMSG_SUSPEND
);
4757 #ifdef CONFIG_NET_POLL_CONTROLLER
4759 * Polling 'interrupt' - used by things like netconsole to send skbs
4760 * without having to re-enable interrupts. It's not called while
4761 * the interrupt routine is executing.
4763 static void e1000_netpoll(struct net_device
*netdev
)
4765 struct e1000_adapter
*adapter
= netdev_priv(netdev
);
4767 disable_irq(adapter
->pdev
->irq
);
4768 e1000_intr(adapter
->pdev
->irq
, netdev
);
4769 enable_irq(adapter
->pdev
->irq
);
4774 * e1000_io_error_detected - called when PCI error is detected
4775 * @pdev: Pointer to PCI device
4776 * @state: The current pci conneection state
4778 * This function is called after a PCI bus error affecting
4779 * this device has been detected.
4781 static pci_ers_result_t
e1000_io_error_detected(struct pci_dev
*pdev
,
4782 pci_channel_state_t state
)
4784 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4785 struct e1000_adapter
*adapter
= netdev
->priv
;
4787 netif_device_detach(netdev
);
4789 if (netif_running(netdev
))
4790 e1000_down(adapter
);
4791 pci_disable_device(pdev
);
4793 /* Request a slot slot reset. */
4794 return PCI_ERS_RESULT_NEED_RESET
;
4798 * e1000_io_slot_reset - called after the pci bus has been reset.
4799 * @pdev: Pointer to PCI device
4801 * Restart the card from scratch, as if from a cold-boot. Implementation
4802 * resembles the first-half of the e1000_resume routine.
4804 static pci_ers_result_t
e1000_io_slot_reset(struct pci_dev
*pdev
)
4806 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4807 struct e1000_adapter
*adapter
= netdev
->priv
;
4808 struct e1000_hw
*hw
= &adapter
->hw
;
4811 if (adapter
->need_ioport
)
4812 err
= pci_enable_device(pdev
);
4814 err
= pci_enable_device_mem(pdev
);
4816 printk(KERN_ERR
"e1000: Cannot re-enable PCI device after reset.\n");
4817 return PCI_ERS_RESULT_DISCONNECT
;
4819 pci_set_master(pdev
);
4821 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4822 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4824 e1000_reset(adapter
);
4827 return PCI_ERS_RESULT_RECOVERED
;
4831 * e1000_io_resume - called when traffic can start flowing again.
4832 * @pdev: Pointer to PCI device
4834 * This callback is called when the error recovery driver tells us that
4835 * its OK to resume normal operation. Implementation resembles the
4836 * second-half of the e1000_resume routine.
4838 static void e1000_io_resume(struct pci_dev
*pdev
)
4840 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4841 struct e1000_adapter
*adapter
= netdev
->priv
;
4842 struct e1000_hw
*hw
= &adapter
->hw
;
4844 e1000_init_manageability(adapter
);
4846 if (netif_running(netdev
)) {
4847 if (e1000_up(adapter
)) {
4848 printk("e1000: can't bring device back up after reset\n");
4853 netif_device_attach(netdev
);
4855 /* If the controller is 82573 and f/w is AMT, do not set
4856 * DRV_LOAD until the interface is up. For all other cases,
4857 * let the f/w know that the h/w is now under the control
4859 if (hw
->mac_type
!= e1000_82573
||
4860 !e1000_check_mng_mode(hw
))
4861 e1000_get_hw_control(adapter
);