drivers/char/tipar.c

   1 /* Hey EMACS -*- linux-c -*-
   2  *
   3  * tipar - low level driver for handling a parallel link cable designed
   4  * for Texas Instruments graphing calculators (http://lpg.ticalc.org).
   5  * A part of the TiLP project.
   6  *
   7  * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
   8  * under the terms of the GNU General Public License.
   9  *
  10  * Various fixes & clean-up from the Linux Kernel Mailing List
  11  * (Alan Cox, Richard B. Johnson, Christoph Hellwig).
  12  */
  13
  14 /* This driver should, in theory, work with any parallel port that has an
  15  * appropriate low-level driver; all I/O is done through the parport
  16  * abstraction layer.
  17  *
  18  * If this driver is built into the kernel, you can configure it using the
  19  * kernel command-line.  For example:
  20  *
  21  *      tipar=timeout,delay       (set timeout and delay)
  22  *
  23  * If the driver is loaded as a module, similar functionality is available
  24  * using module parameters.  The equivalent of the above commands would be:
  25  *
  26  *      # insmod tipar timeout=15 delay=10
  27  */
  28
  29 /* COMPATIBILITY WITH OLD KERNELS
  30  *
  31  * Usually, parallel cables were bound to ports at
  32  * particular I/O addresses, as follows:
  33  *
  34  *      tipar0             0x378
  35  *      tipar1             0x278
  36  *      tipar2             0x3bc
  37  *
  38  *
  39  * This driver, by default, binds tipar devices according to parport and
  40  * the minor number.
  41  *
  42  */
  43 #undef DEBUG                            /* change to #define to get debugging
  44                                          * output - for pr_debug() */
  45 #include <linux/module.h>
  46 #include <linux/types.h>
  47 #include <linux/errno.h>
  48 #include <linux/kernel.h>
  49 #include <linux/sched.h>
  50 #include <linux/delay.h>
  51 #include <linux/fcntl.h>
  52 #include <linux/fs.h>
  53 #include <linux/init.h>
  54 #include <asm/uaccess.h>
  55 #include <linux/ioport.h>
  56 #include <asm/io.h>
  57 #include <linux/bitops.h>
  58 #include <linux/parport.h>              /* Our code depend on parport */
  59 #include <linux/device.h>
  60
  61 /*
  62  * TI definitions
  63  */
  64 #include <linux/ticable.h>
  65
  66 /*
  67  * Version Information
  68  */
  69 #define DRIVER_VERSION "1.19"
  70 #define DRIVER_AUTHOR  "Romain Lievin <roms@lpg.ticalc.org>"
  71 #define DRIVER_DESC    "Device driver for TI/PC parallel link cables"
  72 #define DRIVER_LICENSE "GPL"
  73
  74 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  75
  76 /* ----- global variables --------------------------------------------- */
  77
  78 struct tipar_struct {
  79         struct pardevice *dev;  /* Parport device entry */
  80 };
  81
  82 #define PP_NO 3
  83 static struct tipar_struct table[PP_NO];
  84
  85 static int delay = IO_DELAY;    /* inter-bit delay in microseconds */
  86 static int timeout = TIMAXTIME; /* timeout in tenth of seconds     */
  87
  88 static unsigned int tp_count;   /* tipar count */
  89 static unsigned long opened;    /* opened devices */
  90
  91 static struct class *tipar_class;
  92
  93 /* --- macros for parport access -------------------------------------- */
  94
  95 #define r_dtr(x)        (parport_read_data(table[(x)].dev->port))
  96 #define r_str(x)        (parport_read_status(table[(x)].dev->port))
  97 #define w_ctr(x,y)      (parport_write_control(table[(x)].dev->port, (y)))
  98 #define w_dtr(x,y)      (parport_write_data(table[(x)].dev->port, (y)))
  99
 100 /* --- setting states on the D-bus with the right timing: ------------- */
 101
 102 static inline void
 103 outbyte(int value, int minor)
 104 {
 105         w_dtr(minor, value);
 106 }
 107
 108 static inline int
 109 inbyte(int minor)
 110 {
 111         return (r_str(minor));
 112 }
 113
 114 static inline void
 115 init_ti_parallel(int minor)
 116 {
 117         outbyte(3, minor);
 118 }
 119
 120 /* ----- global defines ----------------------------------------------- */
 121
 122 #define START(x) { x = jiffies + (HZ * timeout) / 10; }
 123 #define WAIT(x)  { \
 124   if (time_before((x), jiffies)) return -1; \
 125   if (need_resched()) schedule(); }
 126
 127 /* ----- D-bus bit-banging functions ---------------------------------- */
 128
 129 /* D-bus protocol (45kbit/s max):
 130                     1                 0                      0
 131        _______        ______|______    __________|________    __________
 132 Red  :        ________      |      ____          |        ____
 133        _        ____________|________      ______|__________       _____
 134 White:  ________            |        ______      |          _______
 135 */
 136
 137 /* Try to transmit a byte on the specified port (-1 if error). */
 138 static int
 139 put_ti_parallel(int minor, unsigned char data)
 140 {
 141         unsigned int bit;
 142         unsigned long max;
 143
 144         for (bit = 0; bit < 8; bit++) {
 145                 if (data & 1) {
 146                         outbyte(2, minor);
 147                         START(max);
 148                         do {
 149                                 WAIT(max);
 150                         } while (inbyte(minor) & 0x10);
 151
 152                         outbyte(3, minor);
 153                         START(max);
 154                         do {
 155                                 WAIT(max);
 156                         } while (!(inbyte(minor) & 0x10));
 157                 } else {
 158                         outbyte(1, minor);
 159                         START(max);
 160                         do {
 161                                 WAIT(max);
 162                         } while (inbyte(minor) & 0x20);
 163
 164                         outbyte(3, minor);
 165                         START(max);
 166                         do {
 167                                 WAIT(max);
 168                         } while (!(inbyte(minor) & 0x20));
 169                 }
 170
 171                 data >>= 1;
 172                 udelay(delay);
 173
 174                 if (need_resched())
 175                         schedule();
 176         }
 177
 178         return 0;
 179 }
 180
 181 /* Receive a byte on the specified port or -1 if error. */
 182 static int
 183 get_ti_parallel(int minor)
 184 {
 185         unsigned int bit;
 186         unsigned char v, data = 0;
 187         unsigned long max;
 188
 189         for (bit = 0; bit < 8; bit++) {
 190                 START(max);
 191                 do {
 192                         WAIT(max);
 193                 } while ((v = inbyte(minor) & 0x30) == 0x30);
 194
 195                 if (v == 0x10) {
 196                         data = (data >> 1) | 0x80;
 197                         outbyte(1, minor);
 198                         START(max);
 199                         do {
 200                                 WAIT(max);
 201                         } while (!(inbyte(minor) & 0x20));
 202                         outbyte(3, minor);
 203                 } else {
 204                         data = data >> 1;
 205                         outbyte(2, minor);
 206                         START(max);
 207                         do {
 208                                 WAIT(max);
 209                         } while (!(inbyte(minor) & 0x10));
 210                         outbyte(3, minor);
 211                 }
 212
 213                 udelay(delay);
 214                 if (need_resched())
 215                         schedule();
 216         }
 217
 218         return (int) data;
 219 }
 220
 221 /* Try to detect a parallel link cable on the specified port */
 222 static int
 223 probe_ti_parallel(int minor)
 224 {
 225         int i;
 226         int seq[] = { 0x00, 0x20, 0x10, 0x30 };
 227         int data;
 228
 229         for (i = 3; i >= 0; i--) {
 230                 outbyte(3, minor);
 231                 outbyte(i, minor);
 232                 udelay(delay);
 233                 data = inbyte(minor) & 0x30;
 234                 pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i,
 235                         data, seq[i]);
 236                 if (data != seq[i]) {
 237                         outbyte(3, minor);
 238                         return -1;
 239                 }
 240         }
 241
 242         outbyte(3, minor);
 243         return 0;
 244 }
 245
 246 /* ----- kernel module functions--------------------------------------- */
 247
 248 static int
 249 tipar_open(struct inode *inode, struct file *file)
 250 {
 251         unsigned int minor = iminor(inode) - TIPAR_MINOR;
 252
 253         if (tp_count == 0 || minor > tp_count - 1)
 254                 return -ENXIO;
 255
 256         if (test_and_set_bit(minor, &opened))
 257                 return -EBUSY;
 258
 259         if (!table[minor].dev) {
 260                 printk(KERN_ERR "%s: NULL device for minor %u\n",
 261                                 __FUNCTION__, minor);
 262                 return -ENXIO;
 263         }
 264         parport_claim_or_block(table[minor].dev);
 265         init_ti_parallel(minor);
 266         parport_release(table[minor].dev);
 267
 268         return nonseekable_open(inode, file);
 269 }
 270
 271 static int
 272 tipar_close(struct inode *inode, struct file *file)
 273 {
 274         unsigned int minor = iminor(inode) - TIPAR_MINOR;
 275
 276         if (minor > tp_count - 1)
 277                 return -ENXIO;
 278
 279         clear_bit(minor, &opened);
 280
 281         return 0;
 282 }
 283
 284 static ssize_t
 285 tipar_write (struct file *file, const char __user *buf, size_t count,
 286                 loff_t * ppos)
 287 {
 288         unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
 289         ssize_t n;
 290
 291         parport_claim_or_block(table[minor].dev);
 292
 293         for (n = 0; n < count; n++) {
 294                 unsigned char b;
 295
 296                 if (get_user(b, buf + n)) {
 297                         n = -EFAULT;
 298                         goto out;
 299                 }
 300
 301                 if (put_ti_parallel(minor, b) == -1) {
 302                         init_ti_parallel(minor);
 303                         n = -ETIMEDOUT;
 304                         goto out;
 305                 }
 306         }
 307       out:
 308         parport_release(table[minor].dev);
 309         return n;
 310 }
 311
 312 static ssize_t
 313 tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
 314 {
 315         int b = 0;
 316         unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
 317         ssize_t retval = 0;
 318         ssize_t n = 0;
 319
 320         if (count == 0)
 321                 return 0;
 322
 323         parport_claim_or_block(table[minor].dev);
 324
 325         while (n < count) {
 326                 b = get_ti_parallel(minor);
 327                 if (b == -1) {
 328                         init_ti_parallel(minor);
 329                         retval = -ETIMEDOUT;
 330                         goto out;
 331                 } else {
 332                         if (put_user(b, buf + n)) {
 333                                 retval = -EFAULT;
 334                                 break;
 335                         } else
 336                                 retval = ++n;
 337                 }
 338
 339                 /* Non-blocking mode : try again ! */
 340                 if (file->f_flags & O_NONBLOCK) {
 341                         retval = -EAGAIN;
 342                         goto out;
 343                 }
 344
 345                 /* Signal pending, try again ! */
 346                 if (signal_pending(current)) {
 347                         retval = -ERESTARTSYS;
 348                         goto out;
 349                 }
 350
 351                 if (need_resched())
 352                         schedule();
 353         }
 354
 355       out:
 356         parport_release(table[minor].dev);
 357         return retval;
 358 }
 359
 360 static int
 361 tipar_ioctl(struct inode *inode, struct file *file,
 362             unsigned int cmd, unsigned long arg)
 363 {
 364         int retval = 0;
 365
 366         switch (cmd) {
 367         case IOCTL_TIPAR_DELAY:
 368                 delay = (int)arg;    //get_user(delay, &arg);
 369                 break;
 370         case IOCTL_TIPAR_TIMEOUT:
 371                 if (arg != 0)
 372                         timeout = (int)arg;
 373                 else
 374                         retval = -EINVAL;
 375           break;
 376         default:
 377                 retval = -ENOTTY;
 378                 break;
 379         }
 380
 381         return retval;
 382 }
 383
 384 /* ----- kernel module registering ------------------------------------ */
 385
 386 static const struct file_operations tipar_fops = {
 387         .owner = THIS_MODULE,
 388         .llseek = no_llseek,
 389         .read = tipar_read,
 390         .write = tipar_write,
 391         .ioctl = tipar_ioctl,
 392         .open = tipar_open,
 393         .release = tipar_close,
 394 };
 395
 396 /* --- initialisation code ------------------------------------- */
 397
 398 #ifndef MODULE
 399 /*      You must set these - there is no sane way to probe for this cable.
 400  *      You can use 'tipar=timeout,delay' to set these now. */
 401 static int __init
 402 tipar_setup(char *str)
 403 {
 404         int ints[3];
 405
 406         str = get_options(str, ARRAY_SIZE(ints), ints);
 407
 408         if (ints[0] > 0) {
 409                 if (ints[1] != 0)
 410                         timeout = ints[1];
 411                 else
 412                         printk(KERN_WARNING "tipar: bad timeout value (0), "
 413                                 "using default value instead");
 414                 if (ints[0] > 1) {
 415                         delay = ints[2];
 416                 }
 417         }
 418
 419         return 1;
 420 }
 421 #endif
 422
 423 /*
 424  * Register our module into parport.
 425  * Pass also 2 callbacks functions to parport: a pre-emptive function and an
 426  * interrupt handler function (unused).
 427  * Display a message such "tipar0: using parport0 (polling)".
 428  */
 429 static int
 430 tipar_register(int nr, struct parport *port)
 431 {
 432         int err = 0;
 433
 434         /* Register our module into parport */
 435         table[nr].dev = parport_register_device(port, "tipar",
 436                                                 NULL, NULL, NULL, 0,
 437                                                 (void *) &table[nr]);
 438
 439         if (table[nr].dev == NULL) {
 440                 err = 1;
 441                 goto out;
 442         }
 443
 444         class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR,
 445                         TIPAR_MINOR + nr), port->dev, "par%d", nr);
 446
 447         /* Display informations */
 448         pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
 449                 PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
 450
 451         if (probe_ti_parallel(nr) != -1)
 452                 pr_info("tipar%d: link cable found\n", nr);
 453         else
 454                 pr_info("tipar%d: link cable not found\n", nr);
 455
 456         err = 0;
 457
 458 out:
 459         return err;
 460 }
 461
 462 static void
 463 tipar_attach(struct parport *port)
 464 {
 465         if (tp_count == PP_NO) {
 466                 pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO);
 467                 return;
 468         }
 469
 470         if (!tipar_register(tp_count, port))
 471                 tp_count++;
 472 }
 473
 474 static void
 475 tipar_detach(struct parport *port)
 476 {
 477         /* Nothing to do */
 478 }
 479
 480 static struct parport_driver tipar_driver = {
 481         .name = "tipar",
 482         .attach = tipar_attach,
 483         .detach = tipar_detach,
 484 };
 485
 486 static int __init
 487 tipar_init_module(void)
 488 {
 489         int err = 0;
 490
 491         pr_info("tipar: parallel link cable driver, version %s\n",
 492                 DRIVER_VERSION);
 493
 494         if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
 495                 printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR);
 496                 err = -EIO;
 497                 goto out;
 498         }
 499
 500         tipar_class = class_create(THIS_MODULE, "ticables");
 501         if (IS_ERR(tipar_class)) {
 502                 err = PTR_ERR(tipar_class);
 503                 goto out_chrdev;
 504         }
 505         if (parport_register_driver(&tipar_driver)) {
 506                 printk(KERN_ERR "tipar: unable to register with parport\n");
 507                 err = -EIO;
 508                 goto out_class;
 509         }
 510
 511         err = 0;
 512         goto out;
 513
 514 out_class:
 515         class_destroy(tipar_class);
 516
 517 out_chrdev:
 518         unregister_chrdev(TIPAR_MAJOR, "tipar");
 519 out:
 520         return err;
 521 }
 522
 523 static void __exit
 524 tipar_cleanup_module(void)
 525 {
 526         unsigned int i;
 527
 528         /* Unregistering module */
 529         parport_unregister_driver(&tipar_driver);
 530
 531         unregister_chrdev(TIPAR_MAJOR, "tipar");
 532
 533         for (i = 0; i < PP_NO; i++) {
 534                 if (table[i].dev == NULL)
 535                         continue;
 536                 parport_unregister_device(table[i].dev);
 537                 class_device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i));
 538         }
 539         class_destroy(tipar_class);
 540
 541         pr_info("tipar: module unloaded\n");
 542 }
 543
 544 /* --------------------------------------------------------------------- */
 545
 546 __setup("tipar=", tipar_setup);
 547 module_init(tipar_init_module);
 548 module_exit(tipar_cleanup_module);
 549
 550 MODULE_AUTHOR(DRIVER_AUTHOR);
 551 MODULE_DESCRIPTION(DRIVER_DESC);
 552 MODULE_LICENSE(DRIVER_LICENSE);
 553
 554 module_param(timeout, int, 0);
 555 MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
 556 module_param(delay, int, 0);
 557 MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");