sparc64: Set IRQF_DISABLED on LDC channel IRQs.
[linux-2.6/verdex.git] / arch / arm / mach-omap2 / pm-debug.c
blob6cc375a275beece5f98bb45635b792f05730c264
1 /*
2 * OMAP Power Management debug routines
4 * Copyright (C) 2005 Texas Instruments, Inc.
5 * Copyright (C) 2006-2008 Nokia Corporation
7 * Written by:
8 * Richard Woodruff <r-woodruff2@ti.com>
9 * Tony Lindgren
10 * Juha Yrjola
11 * Amit Kucheria <amit.kucheria@nokia.com>
12 * Igor Stoppa <igor.stoppa@nokia.com>
13 * Jouni Hogander
15 * Based on pm.c for omap2
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
22 #include <linux/kernel.h>
23 #include <linux/timer.h>
24 #include <linux/clk.h>
25 #include <linux/err.h>
26 #include <linux/io.h>
28 #include <mach/clock.h>
29 #include <mach/board.h>
31 #include "prm.h"
32 #include "cm.h"
33 #include "pm.h"
35 int omap2_pm_debug;
37 #define DUMP_PRM_MOD_REG(mod, reg) \
38 regs[reg_count].name = #mod "." #reg; \
39 regs[reg_count++].val = prm_read_mod_reg(mod, reg)
40 #define DUMP_CM_MOD_REG(mod, reg) \
41 regs[reg_count].name = #mod "." #reg; \
42 regs[reg_count++].val = cm_read_mod_reg(mod, reg)
43 #define DUMP_PRM_REG(reg) \
44 regs[reg_count].name = #reg; \
45 regs[reg_count++].val = __raw_readl(reg)
46 #define DUMP_CM_REG(reg) \
47 regs[reg_count].name = #reg; \
48 regs[reg_count++].val = __raw_readl(reg)
49 #define DUMP_INTC_REG(reg, off) \
50 regs[reg_count].name = #reg; \
51 regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
53 void omap2_pm_dump(int mode, int resume, unsigned int us)
55 struct reg {
56 const char *name;
57 u32 val;
58 } regs[32];
59 int reg_count = 0, i;
60 const char *s1 = NULL, *s2 = NULL;
62 if (!resume) {
63 #if 0
64 /* MPU */
65 DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
66 DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
67 DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
68 DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
69 DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
70 #endif
71 #if 0
72 /* INTC */
73 DUMP_INTC_REG(INTC_MIR0, 0x0084);
74 DUMP_INTC_REG(INTC_MIR1, 0x00a4);
75 DUMP_INTC_REG(INTC_MIR2, 0x00c4);
76 #endif
77 #if 0
78 DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
79 if (cpu_is_omap24xx()) {
80 DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
81 DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
82 OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
83 DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
84 OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
86 DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
87 DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
88 DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
89 DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
90 DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
91 DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
92 DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
93 #endif
94 #if 0
95 /* DSP */
96 if (cpu_is_omap24xx()) {
97 DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
98 DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
99 DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
100 DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
101 DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
102 DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
103 DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
104 DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
105 DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
106 DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
108 #endif
109 } else {
110 DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
111 if (cpu_is_omap24xx())
112 DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
113 DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
114 DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
115 #if 1
116 DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
117 DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
118 DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
119 #endif
122 switch (mode) {
123 case 0:
124 s1 = "full";
125 s2 = "retention";
126 break;
127 case 1:
128 s1 = "MPU";
129 s2 = "retention";
130 break;
131 case 2:
132 s1 = "MPU";
133 s2 = "idle";
134 break;
137 if (!resume)
138 #ifdef CONFIG_NO_HZ
139 printk(KERN_INFO
140 "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
141 jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
142 jiffies));
143 #else
144 printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
145 #endif
146 else
147 printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
148 us / 1000, us % 1000);
150 for (i = 0; i < reg_count; i++)
151 printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);