sparc64: Set IRQF_DISABLED on LDC channel IRQs.
[linux-2.6/verdex.git] / arch / arm / mach-at91 / at91sam9263.c
blob942792d630d8c457ed6bf0051babba6dea36a83c
1 /*
2 * arch/arm/mach-at91/at91sam9263.c
4 * Copyright (C) 2007 Atmel Corporation.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
13 #include <linux/module.h>
14 #include <linux/pm.h>
16 #include <asm/irq.h>
17 #include <asm/mach/arch.h>
18 #include <asm/mach/map.h>
19 #include <mach/at91sam9263.h>
20 #include <mach/at91_pmc.h>
21 #include <mach/at91_rstc.h>
22 #include <mach/at91_shdwc.h>
24 #include "generic.h"
25 #include "clock.h"
27 static struct map_desc at91sam9263_io_desc[] __initdata = {
29 .virtual = AT91_VA_BASE_SYS,
30 .pfn = __phys_to_pfn(AT91_BASE_SYS),
31 .length = SZ_16K,
32 .type = MT_DEVICE,
33 }, {
34 .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
35 .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
36 .length = AT91SAM9263_SRAM0_SIZE,
37 .type = MT_DEVICE,
38 }, {
39 .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
40 .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
41 .length = AT91SAM9263_SRAM1_SIZE,
42 .type = MT_DEVICE,
46 /* --------------------------------------------------------------------
47 * Clocks
48 * -------------------------------------------------------------------- */
51 * The peripheral clocks.
53 static struct clk pioA_clk = {
54 .name = "pioA_clk",
55 .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
56 .type = CLK_TYPE_PERIPHERAL,
58 static struct clk pioB_clk = {
59 .name = "pioB_clk",
60 .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
61 .type = CLK_TYPE_PERIPHERAL,
63 static struct clk pioCDE_clk = {
64 .name = "pioCDE_clk",
65 .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
66 .type = CLK_TYPE_PERIPHERAL,
68 static struct clk usart0_clk = {
69 .name = "usart0_clk",
70 .pmc_mask = 1 << AT91SAM9263_ID_US0,
71 .type = CLK_TYPE_PERIPHERAL,
73 static struct clk usart1_clk = {
74 .name = "usart1_clk",
75 .pmc_mask = 1 << AT91SAM9263_ID_US1,
76 .type = CLK_TYPE_PERIPHERAL,
78 static struct clk usart2_clk = {
79 .name = "usart2_clk",
80 .pmc_mask = 1 << AT91SAM9263_ID_US2,
81 .type = CLK_TYPE_PERIPHERAL,
83 static struct clk mmc0_clk = {
84 .name = "mci0_clk",
85 .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
86 .type = CLK_TYPE_PERIPHERAL,
88 static struct clk mmc1_clk = {
89 .name = "mci1_clk",
90 .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
91 .type = CLK_TYPE_PERIPHERAL,
93 static struct clk can_clk = {
94 .name = "can_clk",
95 .pmc_mask = 1 << AT91SAM9263_ID_CAN,
96 .type = CLK_TYPE_PERIPHERAL,
98 static struct clk twi_clk = {
99 .name = "twi_clk",
100 .pmc_mask = 1 << AT91SAM9263_ID_TWI,
101 .type = CLK_TYPE_PERIPHERAL,
103 static struct clk spi0_clk = {
104 .name = "spi0_clk",
105 .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
106 .type = CLK_TYPE_PERIPHERAL,
108 static struct clk spi1_clk = {
109 .name = "spi1_clk",
110 .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
111 .type = CLK_TYPE_PERIPHERAL,
113 static struct clk ssc0_clk = {
114 .name = "ssc0_clk",
115 .pmc_mask = 1 << AT91SAM9263_ID_SSC0,
116 .type = CLK_TYPE_PERIPHERAL,
118 static struct clk ssc1_clk = {
119 .name = "ssc1_clk",
120 .pmc_mask = 1 << AT91SAM9263_ID_SSC1,
121 .type = CLK_TYPE_PERIPHERAL,
123 static struct clk ac97_clk = {
124 .name = "ac97_clk",
125 .pmc_mask = 1 << AT91SAM9263_ID_AC97C,
126 .type = CLK_TYPE_PERIPHERAL,
128 static struct clk tcb_clk = {
129 .name = "tcb_clk",
130 .pmc_mask = 1 << AT91SAM9263_ID_TCB,
131 .type = CLK_TYPE_PERIPHERAL,
133 static struct clk pwm_clk = {
134 .name = "pwm_clk",
135 .pmc_mask = 1 << AT91SAM9263_ID_PWMC,
136 .type = CLK_TYPE_PERIPHERAL,
138 static struct clk macb_clk = {
139 .name = "macb_clk",
140 .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
141 .type = CLK_TYPE_PERIPHERAL,
143 static struct clk dma_clk = {
144 .name = "dma_clk",
145 .pmc_mask = 1 << AT91SAM9263_ID_DMA,
146 .type = CLK_TYPE_PERIPHERAL,
148 static struct clk twodge_clk = {
149 .name = "2dge_clk",
150 .pmc_mask = 1 << AT91SAM9263_ID_2DGE,
151 .type = CLK_TYPE_PERIPHERAL,
153 static struct clk udc_clk = {
154 .name = "udc_clk",
155 .pmc_mask = 1 << AT91SAM9263_ID_UDP,
156 .type = CLK_TYPE_PERIPHERAL,
158 static struct clk isi_clk = {
159 .name = "isi_clk",
160 .pmc_mask = 1 << AT91SAM9263_ID_ISI,
161 .type = CLK_TYPE_PERIPHERAL,
163 static struct clk lcdc_clk = {
164 .name = "lcdc_clk",
165 .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
166 .type = CLK_TYPE_PERIPHERAL,
168 static struct clk ohci_clk = {
169 .name = "ohci_clk",
170 .pmc_mask = 1 << AT91SAM9263_ID_UHP,
171 .type = CLK_TYPE_PERIPHERAL,
174 static struct clk *periph_clocks[] __initdata = {
175 &pioA_clk,
176 &pioB_clk,
177 &pioCDE_clk,
178 &usart0_clk,
179 &usart1_clk,
180 &usart2_clk,
181 &mmc0_clk,
182 &mmc1_clk,
183 &can_clk,
184 &twi_clk,
185 &spi0_clk,
186 &spi1_clk,
187 &ssc0_clk,
188 &ssc1_clk,
189 &ac97_clk,
190 &tcb_clk,
191 &pwm_clk,
192 &macb_clk,
193 &twodge_clk,
194 &udc_clk,
195 &isi_clk,
196 &lcdc_clk,
197 &dma_clk,
198 &ohci_clk,
199 // irq0 .. irq1
203 * The four programmable clocks.
204 * You must configure pin multiplexing to bring these signals out.
206 static struct clk pck0 = {
207 .name = "pck0",
208 .pmc_mask = AT91_PMC_PCK0,
209 .type = CLK_TYPE_PROGRAMMABLE,
210 .id = 0,
212 static struct clk pck1 = {
213 .name = "pck1",
214 .pmc_mask = AT91_PMC_PCK1,
215 .type = CLK_TYPE_PROGRAMMABLE,
216 .id = 1,
218 static struct clk pck2 = {
219 .name = "pck2",
220 .pmc_mask = AT91_PMC_PCK2,
221 .type = CLK_TYPE_PROGRAMMABLE,
222 .id = 2,
224 static struct clk pck3 = {
225 .name = "pck3",
226 .pmc_mask = AT91_PMC_PCK3,
227 .type = CLK_TYPE_PROGRAMMABLE,
228 .id = 3,
231 static void __init at91sam9263_register_clocks(void)
233 int i;
235 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
236 clk_register(periph_clocks[i]);
238 clk_register(&pck0);
239 clk_register(&pck1);
240 clk_register(&pck2);
241 clk_register(&pck3);
244 /* --------------------------------------------------------------------
245 * GPIO
246 * -------------------------------------------------------------------- */
248 static struct at91_gpio_bank at91sam9263_gpio[] = {
250 .id = AT91SAM9263_ID_PIOA,
251 .offset = AT91_PIOA,
252 .clock = &pioA_clk,
253 }, {
254 .id = AT91SAM9263_ID_PIOB,
255 .offset = AT91_PIOB,
256 .clock = &pioB_clk,
257 }, {
258 .id = AT91SAM9263_ID_PIOCDE,
259 .offset = AT91_PIOC,
260 .clock = &pioCDE_clk,
261 }, {
262 .id = AT91SAM9263_ID_PIOCDE,
263 .offset = AT91_PIOD,
264 .clock = &pioCDE_clk,
265 }, {
266 .id = AT91SAM9263_ID_PIOCDE,
267 .offset = AT91_PIOE,
268 .clock = &pioCDE_clk,
272 static void at91sam9263_reset(void)
274 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
277 static void at91sam9263_poweroff(void)
279 at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
283 /* --------------------------------------------------------------------
284 * AT91SAM9263 processor initialization
285 * -------------------------------------------------------------------- */
287 void __init at91sam9263_initialize(unsigned long main_clock)
289 /* Map peripherals */
290 iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
292 at91_arch_reset = at91sam9263_reset;
293 pm_power_off = at91sam9263_poweroff;
294 at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
296 /* Init clock subsystem */
297 at91_clock_init(main_clock);
299 /* Register the processor-specific clocks */
300 at91sam9263_register_clocks();
302 /* Register GPIO subsystem */
303 at91_gpio_init(at91sam9263_gpio, 5);
306 /* --------------------------------------------------------------------
307 * Interrupt initialization
308 * -------------------------------------------------------------------- */
311 * The default interrupt priority levels (0 = lowest, 7 = highest).
313 static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
314 7, /* Advanced Interrupt Controller (FIQ) */
315 7, /* System Peripherals */
316 1, /* Parallel IO Controller A */
317 1, /* Parallel IO Controller B */
318 1, /* Parallel IO Controller C, D and E */
321 5, /* USART 0 */
322 5, /* USART 1 */
323 5, /* USART 2 */
324 0, /* Multimedia Card Interface 0 */
325 0, /* Multimedia Card Interface 1 */
326 3, /* CAN */
327 6, /* Two-Wire Interface */
328 5, /* Serial Peripheral Interface 0 */
329 5, /* Serial Peripheral Interface 1 */
330 4, /* Serial Synchronous Controller 0 */
331 4, /* Serial Synchronous Controller 1 */
332 5, /* AC97 Controller */
333 0, /* Timer Counter 0, 1 and 2 */
334 0, /* Pulse Width Modulation Controller */
335 3, /* Ethernet */
337 0, /* 2D Graphic Engine */
338 2, /* USB Device Port */
339 0, /* Image Sensor Interface */
340 3, /* LDC Controller */
341 0, /* DMA Controller */
343 2, /* USB Host port */
344 0, /* Advanced Interrupt Controller (IRQ0) */
345 0, /* Advanced Interrupt Controller (IRQ1) */
348 void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
350 if (!priority)
351 priority = at91sam9263_default_irq_priority;
353 /* Initialize the AIC interrupt controller */
354 at91_aic_init(priority);
356 /* Enable GPIO interrupts */
357 at91_gpio_irq_setup();