[ARM] pxa: update defconfig for Verdex Pro
[linux-2.6/verdex.git] / drivers / usb / storage / freecom.c
blob54cc94277acbb7dbb8962723c4510d1a2ea70aa8
1 /* Driver for Freecom USB/IDE adaptor
3 * Freecom v0.1:
5 * First release
7 * Current development and maintenance by:
8 * (C) 2000 David Brown <usb-storage@davidb.org>
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2, or (at your option) any
13 * later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 675 Mass Ave, Cambridge, MA 02139, USA.
24 * This driver was developed with information provided in FREECOM's USB
25 * Programmers Reference Guide. For further information contact Freecom
26 * (http://www.freecom.de/)
29 #include <linux/module.h>
30 #include <scsi/scsi.h>
31 #include <scsi/scsi_cmnd.h>
33 #include "usb.h"
34 #include "transport.h"
35 #include "protocol.h"
36 #include "debug.h"
38 MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
39 MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
40 MODULE_LICENSE("GPL");
42 #ifdef CONFIG_USB_STORAGE_DEBUG
43 static void pdump (void *, int);
44 #endif
46 /* Bits of HD_STATUS */
47 #define ERR_STAT 0x01
48 #define DRQ_STAT 0x08
50 /* All of the outgoing packets are 64 bytes long. */
51 struct freecom_cb_wrap {
52 u8 Type; /* Command type. */
53 u8 Timeout; /* Timeout in seconds. */
54 u8 Atapi[12]; /* An ATAPI packet. */
55 u8 Filler[50]; /* Padding Data. */
58 struct freecom_xfer_wrap {
59 u8 Type; /* Command type. */
60 u8 Timeout; /* Timeout in seconds. */
61 __le32 Count; /* Number of bytes to transfer. */
62 u8 Pad[58];
63 } __attribute__ ((packed));
65 struct freecom_ide_out {
66 u8 Type; /* Type + IDE register. */
67 u8 Pad;
68 __le16 Value; /* Value to write. */
69 u8 Pad2[60];
72 struct freecom_ide_in {
73 u8 Type; /* Type | IDE register. */
74 u8 Pad[63];
77 struct freecom_status {
78 u8 Status;
79 u8 Reason;
80 __le16 Count;
81 u8 Pad[60];
84 /* Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
85 * register. */
86 #define FCM_INT_STATUS 0x02 /* INDEX_STAT */
87 #define FCM_STATUS_BUSY 0x80
89 /* These are the packet types. The low bit indicates that this command
90 * should wait for an interrupt. */
91 #define FCM_PACKET_ATAPI 0x21
92 #define FCM_PACKET_STATUS 0x20
94 /* Receive data from the IDE interface. The ATAPI packet has already
95 * waited, so the data should be immediately available. */
96 #define FCM_PACKET_INPUT 0x81
98 /* Send data to the IDE interface. */
99 #define FCM_PACKET_OUTPUT 0x01
101 /* Write a value to an ide register. Or the ide register to write after
102 * munging the address a bit. */
103 #define FCM_PACKET_IDE_WRITE 0x40
104 #define FCM_PACKET_IDE_READ 0xC0
106 /* All packets (except for status) are 64 bytes long. */
107 #define FCM_PACKET_LENGTH 64
108 #define FCM_STATUS_PACKET_LENGTH 4
110 static int init_freecom(struct us_data *us);
114 * The table of devices
116 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
117 vendorName, productName, useProtocol, useTransport, \
118 initFunction, flags) \
119 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
120 .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
122 struct usb_device_id freecom_usb_ids[] = {
123 # include "unusual_freecom.h"
124 { } /* Terminating entry */
126 MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
128 #undef UNUSUAL_DEV
131 * The flags table
133 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
134 vendor_name, product_name, use_protocol, use_transport, \
135 init_function, Flags) \
137 .vendorName = vendor_name, \
138 .productName = product_name, \
139 .useProtocol = use_protocol, \
140 .useTransport = use_transport, \
141 .initFunction = init_function, \
144 static struct us_unusual_dev freecom_unusual_dev_list[] = {
145 # include "unusual_freecom.h"
146 { } /* Terminating entry */
149 #undef UNUSUAL_DEV
151 static int
152 freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
153 unsigned int ipipe, unsigned int opipe, int count)
155 struct freecom_xfer_wrap *fxfr =
156 (struct freecom_xfer_wrap *) us->iobuf;
157 int result;
159 fxfr->Type = FCM_PACKET_INPUT | 0x00;
160 fxfr->Timeout = 0; /* Short timeout for debugging. */
161 fxfr->Count = cpu_to_le32 (count);
162 memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
164 US_DEBUGP("Read data Freecom! (c=%d)\n", count);
166 /* Issue the transfer command. */
167 result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
168 FCM_PACKET_LENGTH, NULL);
169 if (result != USB_STOR_XFER_GOOD) {
170 US_DEBUGP ("Freecom readdata transport error\n");
171 return USB_STOR_TRANSPORT_ERROR;
174 /* Now transfer all of our blocks. */
175 US_DEBUGP("Start of read\n");
176 result = usb_stor_bulk_srb(us, ipipe, srb);
177 US_DEBUGP("freecom_readdata done!\n");
179 if (result > USB_STOR_XFER_SHORT)
180 return USB_STOR_TRANSPORT_ERROR;
181 return USB_STOR_TRANSPORT_GOOD;
184 static int
185 freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
186 int unsigned ipipe, unsigned int opipe, int count)
188 struct freecom_xfer_wrap *fxfr =
189 (struct freecom_xfer_wrap *) us->iobuf;
190 int result;
192 fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
193 fxfr->Timeout = 0; /* Short timeout for debugging. */
194 fxfr->Count = cpu_to_le32 (count);
195 memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
197 US_DEBUGP("Write data Freecom! (c=%d)\n", count);
199 /* Issue the transfer command. */
200 result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
201 FCM_PACKET_LENGTH, NULL);
202 if (result != USB_STOR_XFER_GOOD) {
203 US_DEBUGP ("Freecom writedata transport error\n");
204 return USB_STOR_TRANSPORT_ERROR;
207 /* Now transfer all of our blocks. */
208 US_DEBUGP("Start of write\n");
209 result = usb_stor_bulk_srb(us, opipe, srb);
211 US_DEBUGP("freecom_writedata done!\n");
212 if (result > USB_STOR_XFER_SHORT)
213 return USB_STOR_TRANSPORT_ERROR;
214 return USB_STOR_TRANSPORT_GOOD;
218 * Transport for the Freecom USB/IDE adaptor.
221 static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
223 struct freecom_cb_wrap *fcb;
224 struct freecom_status *fst;
225 unsigned int ipipe, opipe; /* We need both pipes. */
226 int result;
227 unsigned int partial;
228 int length;
230 fcb = (struct freecom_cb_wrap *) us->iobuf;
231 fst = (struct freecom_status *) us->iobuf;
233 US_DEBUGP("Freecom TRANSPORT STARTED\n");
235 /* Get handles for both transports. */
236 opipe = us->send_bulk_pipe;
237 ipipe = us->recv_bulk_pipe;
239 /* The ATAPI Command always goes out first. */
240 fcb->Type = FCM_PACKET_ATAPI | 0x00;
241 fcb->Timeout = 0;
242 memcpy (fcb->Atapi, srb->cmnd, 12);
243 memset (fcb->Filler, 0, sizeof (fcb->Filler));
245 US_DEBUG(pdump (srb->cmnd, 12));
247 /* Send it out. */
248 result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
249 FCM_PACKET_LENGTH, NULL);
251 /* The Freecom device will only fail if there is something wrong in
252 * USB land. It returns the status in its own registers, which
253 * come back in the bulk pipe. */
254 if (result != USB_STOR_XFER_GOOD) {
255 US_DEBUGP ("freecom transport error\n");
256 return USB_STOR_TRANSPORT_ERROR;
259 /* There are times we can optimize out this status read, but it
260 * doesn't hurt us to always do it now. */
261 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
262 FCM_STATUS_PACKET_LENGTH, &partial);
263 US_DEBUGP("foo Status result %d %u\n", result, partial);
264 if (result != USB_STOR_XFER_GOOD)
265 return USB_STOR_TRANSPORT_ERROR;
267 US_DEBUG(pdump ((void *) fst, partial));
269 /* The firmware will time-out commands after 20 seconds. Some commands
270 * can legitimately take longer than this, so we use a different
271 * command that only waits for the interrupt and then sends status,
272 * without having to send a new ATAPI command to the device.
274 * NOTE: There is some indication that a data transfer after a timeout
275 * may not work, but that is a condition that should never happen.
277 while (fst->Status & FCM_STATUS_BUSY) {
278 US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occurred!\n");
279 US_DEBUGP("fst->Status is %x\n", fst->Status);
281 /* Get the status again */
282 fcb->Type = FCM_PACKET_STATUS;
283 fcb->Timeout = 0;
284 memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
285 memset (fcb->Filler, 0, sizeof (fcb->Filler));
287 /* Send it out. */
288 result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
289 FCM_PACKET_LENGTH, NULL);
291 /* The Freecom device will only fail if there is something
292 * wrong in USB land. It returns the status in its own
293 * registers, which come back in the bulk pipe.
295 if (result != USB_STOR_XFER_GOOD) {
296 US_DEBUGP ("freecom transport error\n");
297 return USB_STOR_TRANSPORT_ERROR;
300 /* get the data */
301 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
302 FCM_STATUS_PACKET_LENGTH, &partial);
304 US_DEBUGP("bar Status result %d %u\n", result, partial);
305 if (result != USB_STOR_XFER_GOOD)
306 return USB_STOR_TRANSPORT_ERROR;
308 US_DEBUG(pdump ((void *) fst, partial));
311 if (partial != 4)
312 return USB_STOR_TRANSPORT_ERROR;
313 if ((fst->Status & 1) != 0) {
314 US_DEBUGP("operation failed\n");
315 return USB_STOR_TRANSPORT_FAILED;
318 /* The device might not have as much data available as we
319 * requested. If you ask for more than the device has, this reads
320 * and such will hang. */
321 US_DEBUGP("Device indicates that it has %d bytes available\n",
322 le16_to_cpu (fst->Count));
323 US_DEBUGP("SCSI requested %d\n", scsi_bufflen(srb));
325 /* Find the length we desire to read. */
326 switch (srb->cmnd[0]) {
327 case INQUIRY:
328 case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
329 case MODE_SENSE:
330 case MODE_SENSE_10:
331 length = le16_to_cpu(fst->Count);
332 break;
333 default:
334 length = scsi_bufflen(srb);
337 /* verify that this amount is legal */
338 if (length > scsi_bufflen(srb)) {
339 length = scsi_bufflen(srb);
340 US_DEBUGP("Truncating request to match buffer length: %d\n", length);
343 /* What we do now depends on what direction the data is supposed to
344 * move in. */
346 switch (us->srb->sc_data_direction) {
347 case DMA_FROM_DEVICE:
348 /* catch bogus "read 0 length" case */
349 if (!length)
350 break;
351 /* Make sure that the status indicates that the device
352 * wants data as well. */
353 if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
354 US_DEBUGP("SCSI wants data, drive doesn't have any\n");
355 return USB_STOR_TRANSPORT_FAILED;
357 result = freecom_readdata (srb, us, ipipe, opipe, length);
358 if (result != USB_STOR_TRANSPORT_GOOD)
359 return result;
361 US_DEBUGP("FCM: Waiting for status\n");
362 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
363 FCM_PACKET_LENGTH, &partial);
364 US_DEBUG(pdump ((void *) fst, partial));
366 if (partial != 4 || result > USB_STOR_XFER_SHORT)
367 return USB_STOR_TRANSPORT_ERROR;
368 if ((fst->Status & ERR_STAT) != 0) {
369 US_DEBUGP("operation failed\n");
370 return USB_STOR_TRANSPORT_FAILED;
372 if ((fst->Reason & 3) != 3) {
373 US_DEBUGP("Drive seems still hungry\n");
374 return USB_STOR_TRANSPORT_FAILED;
376 US_DEBUGP("Transfer happy\n");
377 break;
379 case DMA_TO_DEVICE:
380 /* catch bogus "write 0 length" case */
381 if (!length)
382 break;
383 /* Make sure the status indicates that the device wants to
384 * send us data. */
385 /* !!IMPLEMENT!! */
386 result = freecom_writedata (srb, us, ipipe, opipe, length);
387 if (result != USB_STOR_TRANSPORT_GOOD)
388 return result;
390 US_DEBUGP("FCM: Waiting for status\n");
391 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
392 FCM_PACKET_LENGTH, &partial);
394 if (partial != 4 || result > USB_STOR_XFER_SHORT)
395 return USB_STOR_TRANSPORT_ERROR;
396 if ((fst->Status & ERR_STAT) != 0) {
397 US_DEBUGP("operation failed\n");
398 return USB_STOR_TRANSPORT_FAILED;
400 if ((fst->Reason & 3) != 3) {
401 US_DEBUGP("Drive seems still hungry\n");
402 return USB_STOR_TRANSPORT_FAILED;
405 US_DEBUGP("Transfer happy\n");
406 break;
409 case DMA_NONE:
410 /* Easy, do nothing. */
411 break;
413 default:
414 /* should never hit here -- filtered in usb.c */
415 US_DEBUGP ("freecom unimplemented direction: %d\n",
416 us->srb->sc_data_direction);
417 // Return fail, SCSI seems to handle this better.
418 return USB_STOR_TRANSPORT_FAILED;
419 break;
422 return USB_STOR_TRANSPORT_GOOD;
425 static int init_freecom(struct us_data *us)
427 int result;
428 char *buffer = us->iobuf;
430 /* The DMA-mapped I/O buffer is 64 bytes long, just right for
431 * all our packets. No need to allocate any extra buffer space.
434 result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
435 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
436 buffer[32] = '\0';
437 US_DEBUGP("String returned from FC init is: %s\n", buffer);
439 /* Special thanks to the people at Freecom for providing me with
440 * this "magic sequence", which they use in their Windows and MacOS
441 * drivers to make sure that all the attached perhiperals are
442 * properly reset.
445 /* send reset */
446 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
447 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
448 US_DEBUGP("result from activate reset is %d\n", result);
450 /* wait 250ms */
451 mdelay(250);
453 /* clear reset */
454 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
455 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
456 US_DEBUGP("result from clear reset is %d\n", result);
458 /* wait 3 seconds */
459 mdelay(3 * 1000);
461 return USB_STOR_TRANSPORT_GOOD;
464 static int usb_stor_freecom_reset(struct us_data *us)
466 printk (KERN_CRIT "freecom reset called\n");
468 /* We don't really have this feature. */
469 return FAILED;
472 #ifdef CONFIG_USB_STORAGE_DEBUG
473 static void pdump (void *ibuffer, int length)
475 static char line[80];
476 int offset = 0;
477 unsigned char *buffer = (unsigned char *) ibuffer;
478 int i, j;
479 int from, base;
481 offset = 0;
482 for (i = 0; i < length; i++) {
483 if ((i & 15) == 0) {
484 if (i > 0) {
485 offset += sprintf (line+offset, " - ");
486 for (j = i - 16; j < i; j++) {
487 if (buffer[j] >= 32 && buffer[j] <= 126)
488 line[offset++] = buffer[j];
489 else
490 line[offset++] = '.';
492 line[offset] = 0;
493 US_DEBUGP("%s\n", line);
494 offset = 0;
496 offset += sprintf (line+offset, "%08x:", i);
498 else if ((i & 7) == 0) {
499 offset += sprintf (line+offset, " -");
501 offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
504 /* Add the last "chunk" of data. */
505 from = (length - 1) % 16;
506 base = ((length - 1) / 16) * 16;
508 for (i = from + 1; i < 16; i++)
509 offset += sprintf (line+offset, " ");
510 if (from < 8)
511 offset += sprintf (line+offset, " ");
512 offset += sprintf (line+offset, " - ");
514 for (i = 0; i <= from; i++) {
515 if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
516 line[offset++] = buffer[base+i];
517 else
518 line[offset++] = '.';
520 line[offset] = 0;
521 US_DEBUGP("%s\n", line);
522 offset = 0;
524 #endif
526 static int freecom_probe(struct usb_interface *intf,
527 const struct usb_device_id *id)
529 struct us_data *us;
530 int result;
532 result = usb_stor_probe1(&us, intf, id,
533 (id - freecom_usb_ids) + freecom_unusual_dev_list);
534 if (result)
535 return result;
537 us->transport_name = "Freecom";
538 us->transport = freecom_transport;
539 us->transport_reset = usb_stor_freecom_reset;
540 us->max_lun = 0;
542 result = usb_stor_probe2(us);
543 return result;
546 static struct usb_driver freecom_driver = {
547 .name = "ums-freecom",
548 .probe = freecom_probe,
549 .disconnect = usb_stor_disconnect,
550 .suspend = usb_stor_suspend,
551 .resume = usb_stor_resume,
552 .reset_resume = usb_stor_reset_resume,
553 .pre_reset = usb_stor_pre_reset,
554 .post_reset = usb_stor_post_reset,
555 .id_table = freecom_usb_ids,
556 .soft_unbind = 1,
559 static int __init freecom_init(void)
561 return usb_register(&freecom_driver);
564 static void __exit freecom_exit(void)
566 usb_deregister(&freecom_driver);
569 module_init(freecom_init);
570 module_exit(freecom_exit);