mfd: Make WM8400 depend on I2C until SPI is submitted
[linux-2.6/verdex.git] / drivers / usb / class / cdc-acm.h
blob1f95e7aa1b665618bc1fa83f6b9977375a026298
1 /*
3 * Includes for cdc-acm.c
5 * Mainly take from usbnet's cdc-ether part
7 */
9 /*
10 * CMSPAR, some architectures can't have space and mark parity.
13 #ifndef CMSPAR
14 #define CMSPAR 0
15 #endif
18 * Major and minor numbers.
21 #define ACM_TTY_MAJOR 166
22 #define ACM_TTY_MINORS 32
25 * Requests.
28 #define USB_RT_ACM (USB_TYPE_CLASS | USB_RECIP_INTERFACE)
31 * Output control lines.
34 #define ACM_CTRL_DTR 0x01
35 #define ACM_CTRL_RTS 0x02
38 * Input control lines and line errors.
41 #define ACM_CTRL_DCD 0x01
42 #define ACM_CTRL_DSR 0x02
43 #define ACM_CTRL_BRK 0x04
44 #define ACM_CTRL_RI 0x08
46 #define ACM_CTRL_FRAMING 0x10
47 #define ACM_CTRL_PARITY 0x20
48 #define ACM_CTRL_OVERRUN 0x40
51 * Internal driver structures.
55 * The only reason to have several buffers is to accomodate assumptions
56 * in line disciplines. They ask for empty space amount, receive our URB size,
57 * and proceed to issue several 1-character writes, assuming they will fit.
58 * The very first write takes a complete URB. Fortunately, this only happens
59 * when processing onlcr, so we only need 2 buffers. These values must be
60 * powers of 2.
62 #define ACM_NW 16
63 #define ACM_NR 16
65 struct acm_wb {
66 unsigned char *buf;
67 dma_addr_t dmah;
68 int len;
69 int use;
70 struct urb *urb;
71 struct acm *instance;
74 struct acm_rb {
75 struct list_head list;
76 int size;
77 unsigned char *base;
78 dma_addr_t dma;
81 struct acm_ru {
82 struct list_head list;
83 struct acm_rb *buffer;
84 struct urb *urb;
85 struct acm *instance;
88 struct acm {
89 struct usb_device *dev; /* the corresponding usb device */
90 struct usb_interface *control; /* control interface */
91 struct usb_interface *data; /* data interface */
92 struct tty_struct *tty; /* the corresponding tty */
93 struct urb *ctrlurb; /* urbs */
94 u8 *ctrl_buffer; /* buffers of urbs */
95 dma_addr_t ctrl_dma; /* dma handles of buffers */
96 u8 *country_codes; /* country codes from device */
97 unsigned int country_code_size; /* size of this buffer */
98 unsigned int country_rel_date; /* release date of version */
99 struct acm_wb wb[ACM_NW];
100 struct acm_ru ru[ACM_NR];
101 struct acm_rb rb[ACM_NR];
102 int rx_buflimit;
103 int rx_endpoint;
104 spinlock_t read_lock;
105 struct list_head spare_read_urbs;
106 struct list_head spare_read_bufs;
107 struct list_head filled_read_bufs;
108 int write_used; /* number of non-empty write buffers */
109 int processing;
110 int transmitting;
111 spinlock_t write_lock;
112 struct mutex mutex;
113 struct usb_cdc_line_coding line; /* bits, stop, parity */
114 struct work_struct work; /* work queue entry for line discipline waking up */
115 struct work_struct waker;
116 wait_queue_head_t drain_wait; /* close processing */
117 struct tasklet_struct urb_task; /* rx processing */
118 spinlock_t throttle_lock; /* synchronize throtteling and read callback */
119 unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
120 unsigned int ctrlout; /* output control lines (DTR, RTS) */
121 unsigned int writesize; /* max packet size for the output bulk endpoint */
122 unsigned int readsize,ctrlsize; /* buffer sizes for freeing */
123 unsigned int used; /* someone has this acm's device open */
124 unsigned int minor; /* acm minor number */
125 unsigned char throttle; /* throttled by tty layer */
126 unsigned char clocal; /* termios CLOCAL */
127 unsigned int ctrl_caps; /* control capabilities from the class specific header */
128 unsigned int susp_count; /* number of suspended interfaces */
129 struct acm_wb *delayed_wb; /* write queued for a device about to be woken */
132 #define CDC_DATA_INTERFACE_TYPE 0x0a
134 /* constants describing various quirks and errors */
135 #define NO_UNION_NORMAL 1
136 #define SINGLE_RX_URB 2