2 * This file is part of UBIFS.
4 * Copyright (C) 2006-2008 Nokia Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published by
8 * the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc., 51
17 * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 * Authors: Artem Bityutskiy (Битюцкий Артём)
24 * This file implements VFS file and inode operations of regular files, device
25 * nodes and symlinks as well as address space operations.
27 * UBIFS uses 2 page flags: PG_private and PG_checked. PG_private is set if the
28 * page is dirty and is used for budgeting purposes - dirty pages should not be
29 * budgeted. The PG_checked flag is set if full budgeting is required for the
30 * page e.g., when it corresponds to a file hole or it is just beyond the file
31 * size. The budgeting is done in 'ubifs_write_begin()', because it is OK to
32 * fail in this function, and the budget is released in 'ubifs_write_end()'. So
33 * the PG_private and PG_checked flags carry the information about how the page
34 * was budgeted, to make it possible to release the budget properly.
36 * A thing to keep in mind: inode's 'i_mutex' is locked in most VFS operations
37 * we implement. However, this is not true for '->writepage()', which might be
38 * called with 'i_mutex' unlocked. For example, when pdflush is performing
39 * write-back, it calls 'writepage()' with unlocked 'i_mutex', although the
40 * inode has 'I_LOCK' flag in this case. At "normal" work-paths 'i_mutex' is
41 * locked in '->writepage', e.g. in "sys_write -> alloc_pages -> direct reclaim
42 * path'. So, in '->writepage()' we are only guaranteed that the page is
45 * Similarly, 'i_mutex' does not have to be locked in readpage(), e.g.,
46 * readahead path does not have it locked ("sys_read -> generic_file_aio_read
47 * -> ondemand_readahead -> readpage"). In case of readahead, 'I_LOCK' flag is
48 * not set as well. However, UBIFS disables readahead.
50 * This, for example means that there might be 2 concurrent '->writepage()'
51 * calls for the same inode, but different inode dirty pages.
55 #include <linux/mount.h>
56 #include <linux/namei.h>
58 static int read_block(struct inode
*inode
, void *addr
, unsigned int block
,
59 struct ubifs_data_node
*dn
)
61 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
62 int err
, len
, out_len
;
66 data_key_init(c
, &key
, inode
->i_ino
, block
);
67 err
= ubifs_tnc_lookup(c
, &key
, dn
);
70 /* Not found, so it must be a hole */
71 memset(addr
, 0, UBIFS_BLOCK_SIZE
);
75 ubifs_assert(le64_to_cpu(dn
->ch
.sqnum
) >
76 ubifs_inode(inode
)->creat_sqnum
);
77 len
= le32_to_cpu(dn
->size
);
78 if (len
<= 0 || len
> UBIFS_BLOCK_SIZE
)
81 dlen
= le32_to_cpu(dn
->ch
.len
) - UBIFS_DATA_NODE_SZ
;
82 out_len
= UBIFS_BLOCK_SIZE
;
83 err
= ubifs_decompress(&dn
->data
, dlen
, addr
, &out_len
,
84 le16_to_cpu(dn
->compr_type
));
85 if (err
|| len
!= out_len
)
89 * Data length can be less than a full block, even for blocks that are
90 * not the last in the file (e.g., as a result of making a hole and
91 * appending data). Ensure that the remainder is zeroed out.
93 if (len
< UBIFS_BLOCK_SIZE
)
94 memset(addr
+ len
, 0, UBIFS_BLOCK_SIZE
- len
);
99 ubifs_err("bad data node (block %u, inode %lu)",
100 block
, inode
->i_ino
);
101 dbg_dump_node(c
, dn
);
105 static int do_readpage(struct page
*page
)
109 unsigned int block
, beyond
;
110 struct ubifs_data_node
*dn
;
111 struct inode
*inode
= page
->mapping
->host
;
112 loff_t i_size
= i_size_read(inode
);
114 dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx",
115 inode
->i_ino
, page
->index
, i_size
, page
->flags
);
116 ubifs_assert(!PageChecked(page
));
117 ubifs_assert(!PagePrivate(page
));
121 block
= page
->index
<< UBIFS_BLOCKS_PER_PAGE_SHIFT
;
122 beyond
= (i_size
+ UBIFS_BLOCK_SIZE
- 1) >> UBIFS_BLOCK_SHIFT
;
123 if (block
>= beyond
) {
124 /* Reading beyond inode */
125 SetPageChecked(page
);
126 memset(addr
, 0, PAGE_CACHE_SIZE
);
130 dn
= kmalloc(UBIFS_MAX_DATA_NODE_SZ
, GFP_NOFS
);
140 if (block
>= beyond
) {
141 /* Reading beyond inode */
143 memset(addr
, 0, UBIFS_BLOCK_SIZE
);
145 ret
= read_block(inode
, addr
, block
, dn
);
150 } else if (block
+ 1 == beyond
) {
151 int dlen
= le32_to_cpu(dn
->size
);
152 int ilen
= i_size
& (UBIFS_BLOCK_SIZE
- 1);
154 if (ilen
&& ilen
< dlen
)
155 memset(addr
+ ilen
, 0, dlen
- ilen
);
158 if (++i
>= UBIFS_BLOCKS_PER_PAGE
)
161 addr
+= UBIFS_BLOCK_SIZE
;
164 if (err
== -ENOENT
) {
165 /* Not found, so it must be a hole */
166 SetPageChecked(page
);
170 ubifs_err("cannot read page %lu of inode %lu, error %d",
171 page
->index
, inode
->i_ino
, err
);
178 SetPageUptodate(page
);
179 ClearPageError(page
);
180 flush_dcache_page(page
);
186 ClearPageUptodate(page
);
188 flush_dcache_page(page
);
194 * release_new_page_budget - release budget of a new page.
195 * @c: UBIFS file-system description object
197 * This is a helper function which releases budget corresponding to the budget
198 * of one new page of data.
200 static void release_new_page_budget(struct ubifs_info
*c
)
202 struct ubifs_budget_req req
= { .recalculate
= 1, .new_page
= 1 };
204 ubifs_release_budget(c
, &req
);
208 * release_existing_page_budget - release budget of an existing page.
209 * @c: UBIFS file-system description object
211 * This is a helper function which releases budget corresponding to the budget
212 * of changing one one page of data which already exists on the flash media.
214 static void release_existing_page_budget(struct ubifs_info
*c
)
216 struct ubifs_budget_req req
= { .dd_growth
= c
->page_budget
};
218 ubifs_release_budget(c
, &req
);
221 static int write_begin_slow(struct address_space
*mapping
,
222 loff_t pos
, unsigned len
, struct page
**pagep
,
225 struct inode
*inode
= mapping
->host
;
226 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
227 pgoff_t index
= pos
>> PAGE_CACHE_SHIFT
;
228 struct ubifs_budget_req req
= { .new_page
= 1 };
229 int uninitialized_var(err
), appending
= !!(pos
+ len
> inode
->i_size
);
232 dbg_gen("ino %lu, pos %llu, len %u, i_size %lld",
233 inode
->i_ino
, pos
, len
, inode
->i_size
);
236 * At the slow path we have to budget before locking the page, because
237 * budgeting may force write-back, which would wait on locked pages and
238 * deadlock if we had the page locked. At this point we do not know
239 * anything about the page, so assume that this is a new page which is
240 * written to a hole. This corresponds to largest budget. Later the
241 * budget will be amended if this is not true.
244 /* We are appending data, budget for inode change */
247 err
= ubifs_budget_space(c
, &req
);
251 page
= grab_cache_page_write_begin(mapping
, index
, flags
);
252 if (unlikely(!page
)) {
253 ubifs_release_budget(c
, &req
);
257 if (!PageUptodate(page
)) {
258 if (!(pos
& ~PAGE_CACHE_MASK
) && len
== PAGE_CACHE_SIZE
)
259 SetPageChecked(page
);
261 err
= do_readpage(page
);
264 page_cache_release(page
);
269 SetPageUptodate(page
);
270 ClearPageError(page
);
273 if (PagePrivate(page
))
275 * The page is dirty, which means it was budgeted twice:
276 * o first time the budget was allocated by the task which
277 * made the page dirty and set the PG_private flag;
278 * o and then we budgeted for it for the second time at the
279 * very beginning of this function.
281 * So what we have to do is to release the page budget we
284 release_new_page_budget(c
);
285 else if (!PageChecked(page
))
287 * We are changing a page which already exists on the media.
288 * This means that changing the page does not make the amount
289 * of indexing information larger, and this part of the budget
290 * which we have already acquired may be released.
292 ubifs_convert_page_budget(c
);
295 struct ubifs_inode
*ui
= ubifs_inode(inode
);
298 * 'ubifs_write_end()' is optimized from the fast-path part of
299 * 'ubifs_write_begin()' and expects the @ui_mutex to be locked
300 * if data is appended.
302 mutex_lock(&ui
->ui_mutex
);
305 * The inode is dirty already, so we may free the
306 * budget we allocated.
308 ubifs_release_dirty_inode_budget(c
, ui
);
316 * allocate_budget - allocate budget for 'ubifs_write_begin()'.
317 * @c: UBIFS file-system description object
318 * @page: page to allocate budget for
319 * @ui: UBIFS inode object the page belongs to
320 * @appending: non-zero if the page is appended
322 * This is a helper function for 'ubifs_write_begin()' which allocates budget
323 * for the operation. The budget is allocated differently depending on whether
324 * this is appending, whether the page is dirty or not, and so on. This
325 * function leaves the @ui->ui_mutex locked in case of appending. Returns zero
326 * in case of success and %-ENOSPC in case of failure.
328 static int allocate_budget(struct ubifs_info
*c
, struct page
*page
,
329 struct ubifs_inode
*ui
, int appending
)
331 struct ubifs_budget_req req
= { .fast
= 1 };
333 if (PagePrivate(page
)) {
336 * The page is dirty and we are not appending, which
337 * means no budget is needed at all.
341 mutex_lock(&ui
->ui_mutex
);
344 * The page is dirty and we are appending, so the inode
345 * has to be marked as dirty. However, it is already
346 * dirty, so we do not need any budget. We may return,
347 * but @ui->ui_mutex hast to be left locked because we
348 * should prevent write-back from flushing the inode
349 * and freeing the budget. The lock will be released in
350 * 'ubifs_write_end()'.
355 * The page is dirty, we are appending, the inode is clean, so
356 * we need to budget the inode change.
360 if (PageChecked(page
))
362 * The page corresponds to a hole and does not
363 * exist on the media. So changing it makes
364 * make the amount of indexing information
365 * larger, and we have to budget for a new
371 * Not a hole, the change will not add any new
372 * indexing information, budget for page
375 req
.dirtied_page
= 1;
378 mutex_lock(&ui
->ui_mutex
);
381 * The inode is clean but we will have to mark
382 * it as dirty because we are appending. This
389 return ubifs_budget_space(c
, &req
);
393 * This function is called when a page of data is going to be written. Since
394 * the page of data will not necessarily go to the flash straight away, UBIFS
395 * has to reserve space on the media for it, which is done by means of
398 * This is the hot-path of the file-system and we are trying to optimize it as
399 * much as possible. For this reasons it is split on 2 parts - slow and fast.
401 * There many budgeting cases:
402 * o a new page is appended - we have to budget for a new page and for
403 * changing the inode; however, if the inode is already dirty, there is
404 * no need to budget for it;
405 * o an existing clean page is changed - we have budget for it; if the page
406 * does not exist on the media (a hole), we have to budget for a new
407 * page; otherwise, we may budget for changing an existing page; the
408 * difference between these cases is that changing an existing page does
409 * not introduce anything new to the FS indexing information, so it does
410 * not grow, and smaller budget is acquired in this case;
411 * o an existing dirty page is changed - no need to budget at all, because
412 * the page budget has been acquired by earlier, when the page has been
415 * UBIFS budgeting sub-system may force write-back if it thinks there is no
416 * space to reserve. This imposes some locking restrictions and makes it
417 * impossible to take into account the above cases, and makes it impossible to
418 * optimize budgeting.
420 * The solution for this is that the fast path of 'ubifs_write_begin()' assumes
421 * there is a plenty of flash space and the budget will be acquired quickly,
422 * without forcing write-back. The slow path does not make this assumption.
424 static int ubifs_write_begin(struct file
*file
, struct address_space
*mapping
,
425 loff_t pos
, unsigned len
, unsigned flags
,
426 struct page
**pagep
, void **fsdata
)
428 struct inode
*inode
= mapping
->host
;
429 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
430 struct ubifs_inode
*ui
= ubifs_inode(inode
);
431 pgoff_t index
= pos
>> PAGE_CACHE_SHIFT
;
432 int uninitialized_var(err
), appending
= !!(pos
+ len
> inode
->i_size
);
433 int skipped_read
= 0;
436 ubifs_assert(ubifs_inode(inode
)->ui_size
== inode
->i_size
);
438 if (unlikely(c
->ro_media
))
441 /* Try out the fast-path part first */
442 page
= grab_cache_page_write_begin(mapping
, index
, flags
);
446 if (!PageUptodate(page
)) {
447 /* The page is not loaded from the flash */
448 if (!(pos
& ~PAGE_CACHE_MASK
) && len
== PAGE_CACHE_SIZE
) {
450 * We change whole page so no need to load it. But we
451 * have to set the @PG_checked flag to make the further
452 * code the page is new. This might be not true, but it
453 * is better to budget more that to read the page from
456 SetPageChecked(page
);
459 err
= do_readpage(page
);
462 page_cache_release(page
);
467 SetPageUptodate(page
);
468 ClearPageError(page
);
471 err
= allocate_budget(c
, page
, ui
, appending
);
473 ubifs_assert(err
== -ENOSPC
);
475 * If we skipped reading the page because we were going to
476 * write all of it, then it is not up to date.
479 ClearPageChecked(page
);
480 ClearPageUptodate(page
);
483 * Budgeting failed which means it would have to force
484 * write-back but didn't, because we set the @fast flag in the
485 * request. Write-back cannot be done now, while we have the
486 * page locked, because it would deadlock. Unlock and free
487 * everything and fall-back to slow-path.
490 ubifs_assert(mutex_is_locked(&ui
->ui_mutex
));
491 mutex_unlock(&ui
->ui_mutex
);
494 page_cache_release(page
);
496 return write_begin_slow(mapping
, pos
, len
, pagep
, flags
);
500 * Whee, we aquired budgeting quickly - without involving
501 * garbage-collection, committing or forceing write-back. We return
502 * with @ui->ui_mutex locked if we are appending pages, and unlocked
503 * otherwise. This is an optimization (slightly hacky though).
511 * cancel_budget - cancel budget.
512 * @c: UBIFS file-system description object
513 * @page: page to cancel budget for
514 * @ui: UBIFS inode object the page belongs to
515 * @appending: non-zero if the page is appended
517 * This is a helper function for a page write operation. It unlocks the
518 * @ui->ui_mutex in case of appending.
520 static void cancel_budget(struct ubifs_info
*c
, struct page
*page
,
521 struct ubifs_inode
*ui
, int appending
)
525 ubifs_release_dirty_inode_budget(c
, ui
);
526 mutex_unlock(&ui
->ui_mutex
);
528 if (!PagePrivate(page
)) {
529 if (PageChecked(page
))
530 release_new_page_budget(c
);
532 release_existing_page_budget(c
);
536 static int ubifs_write_end(struct file
*file
, struct address_space
*mapping
,
537 loff_t pos
, unsigned len
, unsigned copied
,
538 struct page
*page
, void *fsdata
)
540 struct inode
*inode
= mapping
->host
;
541 struct ubifs_inode
*ui
= ubifs_inode(inode
);
542 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
543 loff_t end_pos
= pos
+ len
;
544 int appending
= !!(end_pos
> inode
->i_size
);
546 dbg_gen("ino %lu, pos %llu, pg %lu, len %u, copied %d, i_size %lld",
547 inode
->i_ino
, pos
, page
->index
, len
, copied
, inode
->i_size
);
549 if (unlikely(copied
< len
&& len
== PAGE_CACHE_SIZE
)) {
551 * VFS copied less data to the page that it intended and
552 * declared in its '->write_begin()' call via the @len
553 * argument. If the page was not up-to-date, and @len was
554 * @PAGE_CACHE_SIZE, the 'ubifs_write_begin()' function did
555 * not load it from the media (for optimization reasons). This
556 * means that part of the page contains garbage. So read the
559 dbg_gen("copied %d instead of %d, read page and repeat",
561 cancel_budget(c
, page
, ui
, appending
);
564 * Return 0 to force VFS to repeat the whole operation, or the
565 * error code if 'do_readpage()' failes.
567 copied
= do_readpage(page
);
571 if (!PagePrivate(page
)) {
572 SetPagePrivate(page
);
573 atomic_long_inc(&c
->dirty_pg_cnt
);
574 __set_page_dirty_nobuffers(page
);
578 i_size_write(inode
, end_pos
);
579 ui
->ui_size
= end_pos
;
581 * Note, we do not set @I_DIRTY_PAGES (which means that the
582 * inode has dirty pages), this has been done in
583 * '__set_page_dirty_nobuffers()'.
585 __mark_inode_dirty(inode
, I_DIRTY_DATASYNC
);
586 ubifs_assert(mutex_is_locked(&ui
->ui_mutex
));
587 mutex_unlock(&ui
->ui_mutex
);
592 page_cache_release(page
);
597 * populate_page - copy data nodes into a page for bulk-read.
598 * @c: UBIFS file-system description object
600 * @bu: bulk-read information
601 * @n: next zbranch slot
603 * This function returns %0 on success and a negative error code on failure.
605 static int populate_page(struct ubifs_info
*c
, struct page
*page
,
606 struct bu_info
*bu
, int *n
)
608 int i
= 0, nn
= *n
, offs
= bu
->zbranch
[0].offs
, hole
= 0, read
= 0;
609 struct inode
*inode
= page
->mapping
->host
;
610 loff_t i_size
= i_size_read(inode
);
611 unsigned int page_block
;
615 dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx",
616 inode
->i_ino
, page
->index
, i_size
, page
->flags
);
618 addr
= zaddr
= kmap(page
);
620 end_index
= (i_size
- 1) >> PAGE_CACHE_SHIFT
;
621 if (!i_size
|| page
->index
> end_index
) {
623 memset(addr
, 0, PAGE_CACHE_SIZE
);
627 page_block
= page
->index
<< UBIFS_BLOCKS_PER_PAGE_SHIFT
;
629 int err
, len
, out_len
, dlen
;
633 memset(addr
, 0, UBIFS_BLOCK_SIZE
);
634 } else if (key_block(c
, &bu
->zbranch
[nn
].key
) == page_block
) {
635 struct ubifs_data_node
*dn
;
637 dn
= bu
->buf
+ (bu
->zbranch
[nn
].offs
- offs
);
639 ubifs_assert(le64_to_cpu(dn
->ch
.sqnum
) >
640 ubifs_inode(inode
)->creat_sqnum
);
642 len
= le32_to_cpu(dn
->size
);
643 if (len
<= 0 || len
> UBIFS_BLOCK_SIZE
)
646 dlen
= le32_to_cpu(dn
->ch
.len
) - UBIFS_DATA_NODE_SZ
;
647 out_len
= UBIFS_BLOCK_SIZE
;
648 err
= ubifs_decompress(&dn
->data
, dlen
, addr
, &out_len
,
649 le16_to_cpu(dn
->compr_type
));
650 if (err
|| len
!= out_len
)
653 if (len
< UBIFS_BLOCK_SIZE
)
654 memset(addr
+ len
, 0, UBIFS_BLOCK_SIZE
- len
);
657 read
= (i
<< UBIFS_BLOCK_SHIFT
) + len
;
658 } else if (key_block(c
, &bu
->zbranch
[nn
].key
) < page_block
) {
663 memset(addr
, 0, UBIFS_BLOCK_SIZE
);
665 if (++i
>= UBIFS_BLOCKS_PER_PAGE
)
667 addr
+= UBIFS_BLOCK_SIZE
;
671 if (end_index
== page
->index
) {
672 int len
= i_size
& (PAGE_CACHE_SIZE
- 1);
674 if (len
&& len
< read
)
675 memset(zaddr
+ len
, 0, read
- len
);
680 SetPageChecked(page
);
684 SetPageUptodate(page
);
685 ClearPageError(page
);
686 flush_dcache_page(page
);
692 ClearPageUptodate(page
);
694 flush_dcache_page(page
);
696 ubifs_err("bad data node (block %u, inode %lu)",
697 page_block
, inode
->i_ino
);
702 * ubifs_do_bulk_read - do bulk-read.
703 * @c: UBIFS file-system description object
704 * @bu: bulk-read information
705 * @page1: first page to read
707 * This function returns %1 if the bulk-read is done, otherwise %0 is returned.
709 static int ubifs_do_bulk_read(struct ubifs_info
*c
, struct bu_info
*bu
,
712 pgoff_t offset
= page1
->index
, end_index
;
713 struct address_space
*mapping
= page1
->mapping
;
714 struct inode
*inode
= mapping
->host
;
715 struct ubifs_inode
*ui
= ubifs_inode(inode
);
716 int err
, page_idx
, page_cnt
, ret
= 0, n
= 0;
717 int allocate
= bu
->buf
? 0 : 1;
720 err
= ubifs_tnc_get_bu_keys(c
, bu
);
725 /* Turn off bulk-read at the end of the file */
726 ui
->read_in_a_row
= 1;
730 page_cnt
= bu
->blk_cnt
>> UBIFS_BLOCKS_PER_PAGE_SHIFT
;
733 * This happens when there are multiple blocks per page and the
734 * blocks for the first page we are looking for, are not
735 * together. If all the pages were like this, bulk-read would
736 * reduce performance, so we turn it off for a while.
744 * Allocate bulk-read buffer depending on how many data
745 * nodes we are going to read.
747 bu
->buf_len
= bu
->zbranch
[bu
->cnt
- 1].offs
+
748 bu
->zbranch
[bu
->cnt
- 1].len
-
750 ubifs_assert(bu
->buf_len
> 0);
751 ubifs_assert(bu
->buf_len
<= c
->leb_size
);
752 bu
->buf
= kmalloc(bu
->buf_len
, GFP_NOFS
| __GFP_NOWARN
);
757 err
= ubifs_tnc_bulk_read(c
, bu
);
762 err
= populate_page(c
, page1
, bu
, &n
);
769 isize
= i_size_read(inode
);
772 end_index
= ((isize
- 1) >> PAGE_CACHE_SHIFT
);
774 for (page_idx
= 1; page_idx
< page_cnt
; page_idx
++) {
775 pgoff_t page_offset
= offset
+ page_idx
;
778 if (page_offset
> end_index
)
780 page
= find_or_create_page(mapping
, page_offset
,
781 GFP_NOFS
| __GFP_COLD
);
784 if (!PageUptodate(page
))
785 err
= populate_page(c
, page
, bu
, &n
);
787 page_cache_release(page
);
792 ui
->last_page_read
= offset
+ page_idx
- 1;
800 ubifs_warn("ignoring error %d and skipping bulk-read", err
);
804 ui
->read_in_a_row
= ui
->bulk_read
= 0;
809 * ubifs_bulk_read - determine whether to bulk-read and, if so, do it.
810 * @page: page from which to start bulk-read.
812 * Some flash media are capable of reading sequentially at faster rates. UBIFS
813 * bulk-read facility is designed to take advantage of that, by reading in one
814 * go consecutive data nodes that are also located consecutively in the same
815 * LEB. This function returns %1 if a bulk-read is done and %0 otherwise.
817 static int ubifs_bulk_read(struct page
*page
)
819 struct inode
*inode
= page
->mapping
->host
;
820 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
821 struct ubifs_inode
*ui
= ubifs_inode(inode
);
822 pgoff_t index
= page
->index
, last_page_read
= ui
->last_page_read
;
824 int err
= 0, allocated
= 0;
826 ui
->last_page_read
= index
;
831 * Bulk-read is protected by @ui->ui_mutex, but it is an optimization,
832 * so don't bother if we cannot lock the mutex.
834 if (!mutex_trylock(&ui
->ui_mutex
))
837 if (index
!= last_page_read
+ 1) {
838 /* Turn off bulk-read if we stop reading sequentially */
839 ui
->read_in_a_row
= 1;
845 if (!ui
->bulk_read
) {
846 ui
->read_in_a_row
+= 1;
847 if (ui
->read_in_a_row
< 3)
849 /* Three reads in a row, so switch on bulk-read */
854 * If possible, try to use pre-allocated bulk-read information, which
855 * is protected by @c->bu_mutex.
857 if (mutex_trylock(&c
->bu_mutex
))
860 bu
= kmalloc(sizeof(struct bu_info
), GFP_NOFS
| __GFP_NOWARN
);
868 bu
->buf_len
= c
->max_bu_buf_len
;
869 data_key_init(c
, &bu
->key
, inode
->i_ino
,
870 page
->index
<< UBIFS_BLOCKS_PER_PAGE_SHIFT
);
871 err
= ubifs_do_bulk_read(c
, bu
, page
);
874 mutex_unlock(&c
->bu_mutex
);
879 mutex_unlock(&ui
->ui_mutex
);
883 static int ubifs_readpage(struct file
*file
, struct page
*page
)
885 if (ubifs_bulk_read(page
))
892 static int do_writepage(struct page
*page
, int len
)
894 int err
= 0, i
, blen
;
898 struct inode
*inode
= page
->mapping
->host
;
899 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
902 spin_lock(&ui
->ui_lock
);
903 ubifs_assert(page
->index
<= ui
->synced_i_size
<< PAGE_CACHE_SIZE
);
904 spin_unlock(&ui
->ui_lock
);
907 /* Update radix tree tags */
908 set_page_writeback(page
);
911 block
= page
->index
<< UBIFS_BLOCKS_PER_PAGE_SHIFT
;
914 blen
= min_t(int, len
, UBIFS_BLOCK_SIZE
);
915 data_key_init(c
, &key
, inode
->i_ino
, block
);
916 err
= ubifs_jnl_write_data(c
, inode
, &key
, addr
, blen
);
919 if (++i
>= UBIFS_BLOCKS_PER_PAGE
)
927 ubifs_err("cannot write page %lu of inode %lu, error %d",
928 page
->index
, inode
->i_ino
, err
);
929 ubifs_ro_mode(c
, err
);
932 ubifs_assert(PagePrivate(page
));
933 if (PageChecked(page
))
934 release_new_page_budget(c
);
936 release_existing_page_budget(c
);
938 atomic_long_dec(&c
->dirty_pg_cnt
);
939 ClearPagePrivate(page
);
940 ClearPageChecked(page
);
944 end_page_writeback(page
);
949 * When writing-back dirty inodes, VFS first writes-back pages belonging to the
950 * inode, then the inode itself. For UBIFS this may cause a problem. Consider a
951 * situation when a we have an inode with size 0, then a megabyte of data is
952 * appended to the inode, then write-back starts and flushes some amount of the
953 * dirty pages, the journal becomes full, commit happens and finishes, and then
954 * an unclean reboot happens. When the file system is mounted next time, the
955 * inode size would still be 0, but there would be many pages which are beyond
956 * the inode size, they would be indexed and consume flash space. Because the
957 * journal has been committed, the replay would not be able to detect this
958 * situation and correct the inode size. This means UBIFS would have to scan
959 * whole index and correct all inode sizes, which is long an unacceptable.
961 * To prevent situations like this, UBIFS writes pages back only if they are
962 * within the last synchronized inode size, i.e. the size which has been
963 * written to the flash media last time. Otherwise, UBIFS forces inode
964 * write-back, thus making sure the on-flash inode contains current inode size,
965 * and then keeps writing pages back.
967 * Some locking issues explanation. 'ubifs_writepage()' first is called with
968 * the page locked, and it locks @ui_mutex. However, write-back does take inode
969 * @i_mutex, which means other VFS operations may be run on this inode at the
970 * same time. And the problematic one is truncation to smaller size, from where
971 * we have to call 'vmtruncate()', which first changes @inode->i_size, then
972 * drops the truncated pages. And while dropping the pages, it takes the page
973 * lock. This means that 'do_truncation()' cannot call 'vmtruncate()' with
974 * @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
975 * means that @inode->i_size is changed while @ui_mutex is unlocked.
977 * But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
978 * inode size. How do we do this if @inode->i_size may became smaller while we
979 * are in the middle of 'ubifs_writepage()'? The UBIFS solution is the
980 * @ui->ui_isize "shadow" field which UBIFS uses instead of @inode->i_size
981 * internally and updates it under @ui_mutex.
983 * Q: why we do not worry that if we race with truncation, we may end up with a
984 * situation when the inode is truncated while we are in the middle of
985 * 'do_writepage()', so we do write beyond inode size?
986 * A: If we are in the middle of 'do_writepage()', truncation would be locked
987 * on the page lock and it would not write the truncated inode node to the
988 * journal before we have finished.
990 static int ubifs_writepage(struct page
*page
, struct writeback_control
*wbc
)
992 struct inode
*inode
= page
->mapping
->host
;
993 struct ubifs_inode
*ui
= ubifs_inode(inode
);
994 loff_t i_size
= i_size_read(inode
), synced_i_size
;
995 pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
996 int err
, len
= i_size
& (PAGE_CACHE_SIZE
- 1);
999 dbg_gen("ino %lu, pg %lu, pg flags %#lx",
1000 inode
->i_ino
, page
->index
, page
->flags
);
1001 ubifs_assert(PagePrivate(page
));
1003 /* Is the page fully outside @i_size? (truncate in progress) */
1004 if (page
->index
> end_index
|| (page
->index
== end_index
&& !len
)) {
1009 spin_lock(&ui
->ui_lock
);
1010 synced_i_size
= ui
->synced_i_size
;
1011 spin_unlock(&ui
->ui_lock
);
1013 /* Is the page fully inside @i_size? */
1014 if (page
->index
< end_index
) {
1015 if (page
->index
>= synced_i_size
>> PAGE_CACHE_SHIFT
) {
1016 err
= inode
->i_sb
->s_op
->write_inode(inode
, 1);
1020 * The inode has been written, but the write-buffer has
1021 * not been synchronized, so in case of an unclean
1022 * reboot we may end up with some pages beyond inode
1023 * size, but they would be in the journal (because
1024 * commit flushes write buffers) and recovery would deal
1028 return do_writepage(page
, PAGE_CACHE_SIZE
);
1032 * The page straddles @i_size. It must be zeroed out on each and every
1033 * writepage invocation because it may be mmapped. "A file is mapped
1034 * in multiples of the page size. For a file that is not a multiple of
1035 * the page size, the remaining memory is zeroed when mapped, and
1036 * writes to that region are not written out to the file."
1038 kaddr
= kmap_atomic(page
, KM_USER0
);
1039 memset(kaddr
+ len
, 0, PAGE_CACHE_SIZE
- len
);
1040 flush_dcache_page(page
);
1041 kunmap_atomic(kaddr
, KM_USER0
);
1043 if (i_size
> synced_i_size
) {
1044 err
= inode
->i_sb
->s_op
->write_inode(inode
, 1);
1049 return do_writepage(page
, len
);
1057 * do_attr_changes - change inode attributes.
1058 * @inode: inode to change attributes for
1059 * @attr: describes attributes to change
1061 static void do_attr_changes(struct inode
*inode
, const struct iattr
*attr
)
1063 if (attr
->ia_valid
& ATTR_UID
)
1064 inode
->i_uid
= attr
->ia_uid
;
1065 if (attr
->ia_valid
& ATTR_GID
)
1066 inode
->i_gid
= attr
->ia_gid
;
1067 if (attr
->ia_valid
& ATTR_ATIME
)
1068 inode
->i_atime
= timespec_trunc(attr
->ia_atime
,
1069 inode
->i_sb
->s_time_gran
);
1070 if (attr
->ia_valid
& ATTR_MTIME
)
1071 inode
->i_mtime
= timespec_trunc(attr
->ia_mtime
,
1072 inode
->i_sb
->s_time_gran
);
1073 if (attr
->ia_valid
& ATTR_CTIME
)
1074 inode
->i_ctime
= timespec_trunc(attr
->ia_ctime
,
1075 inode
->i_sb
->s_time_gran
);
1076 if (attr
->ia_valid
& ATTR_MODE
) {
1077 umode_t mode
= attr
->ia_mode
;
1079 if (!in_group_p(inode
->i_gid
) && !capable(CAP_FSETID
))
1081 inode
->i_mode
= mode
;
1086 * do_truncation - truncate an inode.
1087 * @c: UBIFS file-system description object
1088 * @inode: inode to truncate
1089 * @attr: inode attribute changes description
1091 * This function implements VFS '->setattr()' call when the inode is truncated
1092 * to a smaller size. Returns zero in case of success and a negative error code
1093 * in case of failure.
1095 static int do_truncation(struct ubifs_info
*c
, struct inode
*inode
,
1096 const struct iattr
*attr
)
1099 struct ubifs_budget_req req
;
1100 loff_t old_size
= inode
->i_size
, new_size
= attr
->ia_size
;
1101 int offset
= new_size
& (UBIFS_BLOCK_SIZE
- 1), budgeted
= 1;
1102 struct ubifs_inode
*ui
= ubifs_inode(inode
);
1104 dbg_gen("ino %lu, size %lld -> %lld", inode
->i_ino
, old_size
, new_size
);
1105 memset(&req
, 0, sizeof(struct ubifs_budget_req
));
1108 * If this is truncation to a smaller size, and we do not truncate on a
1109 * block boundary, budget for changing one data block, because the last
1110 * block will be re-written.
1112 if (new_size
& (UBIFS_BLOCK_SIZE
- 1))
1113 req
.dirtied_page
= 1;
1115 req
.dirtied_ino
= 1;
1116 /* A funny way to budget for truncation node */
1117 req
.dirtied_ino_d
= UBIFS_TRUN_NODE_SZ
;
1118 err
= ubifs_budget_space(c
, &req
);
1121 * Treat truncations to zero as deletion and always allow them,
1122 * just like we do for '->unlink()'.
1124 if (new_size
|| err
!= -ENOSPC
)
1129 err
= vmtruncate(inode
, new_size
);
1134 pgoff_t index
= new_size
>> PAGE_CACHE_SHIFT
;
1137 page
= find_lock_page(inode
->i_mapping
, index
);
1139 if (PageDirty(page
)) {
1141 * 'ubifs_jnl_truncate()' will try to truncate
1142 * the last data node, but it contains
1143 * out-of-date data because the page is dirty.
1144 * Write the page now, so that
1145 * 'ubifs_jnl_truncate()' will see an already
1146 * truncated (and up to date) data node.
1148 ubifs_assert(PagePrivate(page
));
1150 clear_page_dirty_for_io(page
);
1151 if (UBIFS_BLOCKS_PER_PAGE_SHIFT
)
1153 (PAGE_CACHE_SIZE
- 1);
1154 err
= do_writepage(page
, offset
);
1155 page_cache_release(page
);
1159 * We could now tell 'ubifs_jnl_truncate()' not
1160 * to read the last block.
1164 * We could 'kmap()' the page and pass the data
1165 * to 'ubifs_jnl_truncate()' to save it from
1166 * having to read it.
1169 page_cache_release(page
);
1174 mutex_lock(&ui
->ui_mutex
);
1175 ui
->ui_size
= inode
->i_size
;
1176 /* Truncation changes inode [mc]time */
1177 inode
->i_mtime
= inode
->i_ctime
= ubifs_current_time(inode
);
1178 /* The other attributes may be changed at the same time as well */
1179 do_attr_changes(inode
, attr
);
1181 err
= ubifs_jnl_truncate(c
, inode
, old_size
, new_size
);
1182 mutex_unlock(&ui
->ui_mutex
);
1185 ubifs_release_budget(c
, &req
);
1187 c
->nospace
= c
->nospace_rp
= 0;
1194 * do_setattr - change inode attributes.
1195 * @c: UBIFS file-system description object
1196 * @inode: inode to change attributes for
1197 * @attr: inode attribute changes description
1199 * This function implements VFS '->setattr()' call for all cases except
1200 * truncations to smaller size. Returns zero in case of success and a negative
1201 * error code in case of failure.
1203 static int do_setattr(struct ubifs_info
*c
, struct inode
*inode
,
1204 const struct iattr
*attr
)
1207 loff_t new_size
= attr
->ia_size
;
1208 struct ubifs_inode
*ui
= ubifs_inode(inode
);
1209 struct ubifs_budget_req req
= { .dirtied_ino
= 1,
1210 .dirtied_ino_d
= ALIGN(ui
->data_len
, 8) };
1212 err
= ubifs_budget_space(c
, &req
);
1216 if (attr
->ia_valid
& ATTR_SIZE
) {
1217 dbg_gen("size %lld -> %lld", inode
->i_size
, new_size
);
1218 err
= vmtruncate(inode
, new_size
);
1223 mutex_lock(&ui
->ui_mutex
);
1224 if (attr
->ia_valid
& ATTR_SIZE
) {
1225 /* Truncation changes inode [mc]time */
1226 inode
->i_mtime
= inode
->i_ctime
= ubifs_current_time(inode
);
1227 /* 'vmtruncate()' changed @i_size, update @ui_size */
1228 ui
->ui_size
= inode
->i_size
;
1231 do_attr_changes(inode
, attr
);
1233 release
= ui
->dirty
;
1234 if (attr
->ia_valid
& ATTR_SIZE
)
1236 * Inode length changed, so we have to make sure
1237 * @I_DIRTY_DATASYNC is set.
1239 __mark_inode_dirty(inode
, I_DIRTY_SYNC
| I_DIRTY_DATASYNC
);
1241 mark_inode_dirty_sync(inode
);
1242 mutex_unlock(&ui
->ui_mutex
);
1245 ubifs_release_budget(c
, &req
);
1247 err
= inode
->i_sb
->s_op
->write_inode(inode
, 1);
1251 ubifs_release_budget(c
, &req
);
1255 int ubifs_setattr(struct dentry
*dentry
, struct iattr
*attr
)
1258 struct inode
*inode
= dentry
->d_inode
;
1259 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
1261 dbg_gen("ino %lu, mode %#x, ia_valid %#x",
1262 inode
->i_ino
, inode
->i_mode
, attr
->ia_valid
);
1263 err
= inode_change_ok(inode
, attr
);
1267 err
= dbg_check_synced_i_size(inode
);
1271 if ((attr
->ia_valid
& ATTR_SIZE
) && attr
->ia_size
< inode
->i_size
)
1272 /* Truncation to a smaller size */
1273 err
= do_truncation(c
, inode
, attr
);
1275 err
= do_setattr(c
, inode
, attr
);
1280 static void ubifs_invalidatepage(struct page
*page
, unsigned long offset
)
1282 struct inode
*inode
= page
->mapping
->host
;
1283 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
1285 ubifs_assert(PagePrivate(page
));
1287 /* Partial page remains dirty */
1290 if (PageChecked(page
))
1291 release_new_page_budget(c
);
1293 release_existing_page_budget(c
);
1295 atomic_long_dec(&c
->dirty_pg_cnt
);
1296 ClearPagePrivate(page
);
1297 ClearPageChecked(page
);
1300 static void *ubifs_follow_link(struct dentry
*dentry
, struct nameidata
*nd
)
1302 struct ubifs_inode
*ui
= ubifs_inode(dentry
->d_inode
);
1304 nd_set_link(nd
, ui
->data
);
1308 int ubifs_fsync(struct file
*file
, struct dentry
*dentry
, int datasync
)
1310 struct inode
*inode
= dentry
->d_inode
;
1311 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
1314 dbg_gen("syncing inode %lu", inode
->i_ino
);
1317 * VFS has already synchronized dirty pages for this inode. Synchronize
1318 * the inode unless this is a 'datasync()' call.
1320 if (!datasync
|| (inode
->i_state
& I_DIRTY_DATASYNC
)) {
1321 err
= inode
->i_sb
->s_op
->write_inode(inode
, 1);
1327 * Nodes related to this inode may still sit in a write-buffer. Flush
1330 err
= ubifs_sync_wbufs_by_inode(c
, inode
);
1338 * mctime_update_needed - check if mtime or ctime update is needed.
1339 * @inode: the inode to do the check for
1340 * @now: current time
1342 * This helper function checks if the inode mtime/ctime should be updated or
1343 * not. If current values of the time-stamps are within the UBIFS inode time
1344 * granularity, they are not updated. This is an optimization.
1346 static inline int mctime_update_needed(const struct inode
*inode
,
1347 const struct timespec
*now
)
1349 if (!timespec_equal(&inode
->i_mtime
, now
) ||
1350 !timespec_equal(&inode
->i_ctime
, now
))
1356 * update_ctime - update mtime and ctime of an inode.
1357 * @c: UBIFS file-system description object
1358 * @inode: inode to update
1360 * This function updates mtime and ctime of the inode if it is not equivalent to
1361 * current time. Returns zero in case of success and a negative error code in
1364 static int update_mctime(struct ubifs_info
*c
, struct inode
*inode
)
1366 struct timespec now
= ubifs_current_time(inode
);
1367 struct ubifs_inode
*ui
= ubifs_inode(inode
);
1369 if (mctime_update_needed(inode
, &now
)) {
1371 struct ubifs_budget_req req
= { .dirtied_ino
= 1,
1372 .dirtied_ino_d
= ALIGN(ui
->data_len
, 8) };
1374 err
= ubifs_budget_space(c
, &req
);
1378 mutex_lock(&ui
->ui_mutex
);
1379 inode
->i_mtime
= inode
->i_ctime
= ubifs_current_time(inode
);
1380 release
= ui
->dirty
;
1381 mark_inode_dirty_sync(inode
);
1382 mutex_unlock(&ui
->ui_mutex
);
1384 ubifs_release_budget(c
, &req
);
1390 static ssize_t
ubifs_aio_write(struct kiocb
*iocb
, const struct iovec
*iov
,
1391 unsigned long nr_segs
, loff_t pos
)
1395 struct inode
*inode
= iocb
->ki_filp
->f_mapping
->host
;
1396 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
1398 err
= update_mctime(c
, inode
);
1402 ret
= generic_file_aio_write(iocb
, iov
, nr_segs
, pos
);
1406 if (ret
> 0 && (IS_SYNC(inode
) || iocb
->ki_filp
->f_flags
& O_SYNC
)) {
1407 err
= ubifs_sync_wbufs_by_inode(c
, inode
);
1415 static int ubifs_set_page_dirty(struct page
*page
)
1419 ret
= __set_page_dirty_nobuffers(page
);
1421 * An attempt to dirty a page without budgeting for it - should not
1424 ubifs_assert(ret
== 0);
1428 static int ubifs_releasepage(struct page
*page
, gfp_t unused_gfp_flags
)
1431 * An attempt to release a dirty page without budgeting for it - should
1434 if (PageWriteback(page
))
1436 ubifs_assert(PagePrivate(page
));
1438 ClearPagePrivate(page
);
1439 ClearPageChecked(page
);
1444 * mmap()d file has taken write protection fault and is being made
1445 * writable. UBIFS must ensure page is budgeted for.
1447 static int ubifs_vm_page_mkwrite(struct vm_area_struct
*vma
, struct vm_fault
*vmf
)
1449 struct page
*page
= vmf
->page
;
1450 struct inode
*inode
= vma
->vm_file
->f_path
.dentry
->d_inode
;
1451 struct ubifs_info
*c
= inode
->i_sb
->s_fs_info
;
1452 struct timespec now
= ubifs_current_time(inode
);
1453 struct ubifs_budget_req req
= { .new_page
= 1 };
1454 int err
, update_time
;
1456 dbg_gen("ino %lu, pg %lu, i_size %lld", inode
->i_ino
, page
->index
,
1457 i_size_read(inode
));
1458 ubifs_assert(!(inode
->i_sb
->s_flags
& MS_RDONLY
));
1460 if (unlikely(c
->ro_media
))
1461 return VM_FAULT_SIGBUS
; /* -EROFS */
1464 * We have not locked @page so far so we may budget for changing the
1465 * page. Note, we cannot do this after we locked the page, because
1466 * budgeting may cause write-back which would cause deadlock.
1468 * At the moment we do not know whether the page is dirty or not, so we
1469 * assume that it is not and budget for a new page. We could look at
1470 * the @PG_private flag and figure this out, but we may race with write
1471 * back and the page state may change by the time we lock it, so this
1472 * would need additional care. We do not bother with this at the
1473 * moment, although it might be good idea to do. Instead, we allocate
1474 * budget for a new page and amend it later on if the page was in fact
1477 * The budgeting-related logic of this function is similar to what we
1478 * do in 'ubifs_write_begin()' and 'ubifs_write_end()'. Glance there
1479 * for more comments.
1481 update_time
= mctime_update_needed(inode
, &now
);
1484 * We have to change inode time stamp which requires extra
1487 req
.dirtied_ino
= 1;
1489 err
= ubifs_budget_space(c
, &req
);
1490 if (unlikely(err
)) {
1492 ubifs_warn("out of space for mmapped file "
1493 "(inode number %lu)", inode
->i_ino
);
1494 return VM_FAULT_SIGBUS
;
1498 if (unlikely(page
->mapping
!= inode
->i_mapping
||
1499 page_offset(page
) > i_size_read(inode
))) {
1500 /* Page got truncated out from underneath us */
1505 if (PagePrivate(page
))
1506 release_new_page_budget(c
);
1508 if (!PageChecked(page
))
1509 ubifs_convert_page_budget(c
);
1510 SetPagePrivate(page
);
1511 atomic_long_inc(&c
->dirty_pg_cnt
);
1512 __set_page_dirty_nobuffers(page
);
1517 struct ubifs_inode
*ui
= ubifs_inode(inode
);
1519 mutex_lock(&ui
->ui_mutex
);
1520 inode
->i_mtime
= inode
->i_ctime
= ubifs_current_time(inode
);
1521 release
= ui
->dirty
;
1522 mark_inode_dirty_sync(inode
);
1523 mutex_unlock(&ui
->ui_mutex
);
1525 ubifs_release_dirty_inode_budget(c
, ui
);
1533 ubifs_release_budget(c
, &req
);
1535 err
= VM_FAULT_SIGBUS
;
1539 static struct vm_operations_struct ubifs_file_vm_ops
= {
1540 .fault
= filemap_fault
,
1541 .page_mkwrite
= ubifs_vm_page_mkwrite
,
1544 static int ubifs_file_mmap(struct file
*file
, struct vm_area_struct
*vma
)
1548 /* 'generic_file_mmap()' takes care of NOMMU case */
1549 err
= generic_file_mmap(file
, vma
);
1552 vma
->vm_ops
= &ubifs_file_vm_ops
;
1556 const struct address_space_operations ubifs_file_address_operations
= {
1557 .readpage
= ubifs_readpage
,
1558 .writepage
= ubifs_writepage
,
1559 .write_begin
= ubifs_write_begin
,
1560 .write_end
= ubifs_write_end
,
1561 .invalidatepage
= ubifs_invalidatepage
,
1562 .set_page_dirty
= ubifs_set_page_dirty
,
1563 .releasepage
= ubifs_releasepage
,
1566 const struct inode_operations ubifs_file_inode_operations
= {
1567 .setattr
= ubifs_setattr
,
1568 .getattr
= ubifs_getattr
,
1569 #ifdef CONFIG_UBIFS_FS_XATTR
1570 .setxattr
= ubifs_setxattr
,
1571 .getxattr
= ubifs_getxattr
,
1572 .listxattr
= ubifs_listxattr
,
1573 .removexattr
= ubifs_removexattr
,
1577 const struct inode_operations ubifs_symlink_inode_operations
= {
1578 .readlink
= generic_readlink
,
1579 .follow_link
= ubifs_follow_link
,
1580 .setattr
= ubifs_setattr
,
1581 .getattr
= ubifs_getattr
,
1584 const struct file_operations ubifs_file_operations
= {
1585 .llseek
= generic_file_llseek
,
1586 .read
= do_sync_read
,
1587 .write
= do_sync_write
,
1588 .aio_read
= generic_file_aio_read
,
1589 .aio_write
= ubifs_aio_write
,
1590 .mmap
= ubifs_file_mmap
,
1591 .fsync
= ubifs_fsync
,
1592 .unlocked_ioctl
= ubifs_ioctl
,
1593 .splice_read
= generic_file_splice_read
,
1594 .splice_write
= generic_file_splice_write
,
1595 #ifdef CONFIG_COMPAT
1596 .compat_ioctl
= ubifs_compat_ioctl
,