?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
cfg80211: fix looping soft lockup in find_ie()
[linux-2.6/verdex.git] / drivers / serial / sh-sci.c
blob8e2feb563347151d220ed23155074dc5e0f0c761
1 /*
2 * drivers/serial/sh-sci.c
3 *
4 * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
5 *
6 * Copyright (C) 2002 - 2008 Paul Mundt
7 * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
8 *
9 * based off of the old drivers/char/sh-sci.c by:
10 *
11 * Copyright (C) 1999, 2000 Niibe Yutaka
12 * Copyright (C) 2000 Sugioka Toshinobu
13 * Modified to support multiple serial ports. Stuart Menefy (May 2000).
14 * Modified to support SecureEdge. David McCullough (2002)
15 * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
16 * Removed SH7300 support (Jul 2007).
17 *
18 * This file is subject to the terms and conditions of the GNU General Public
19 * License. See the file "COPYING" in the main directory of this archive
20 * for more details.
21 */
22 #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
23 #define SUPPORT_SYSRQ
24 #endif
25
26 #undef DEBUG
27
28 #include <linux/module.h>
29 #include <linux/errno.h>
30 #include <linux/timer.h>
31 #include <linux/interrupt.h>
32 #include <linux/tty.h>
33 #include <linux/tty_flip.h>
34 #include <linux/serial.h>
35 #include <linux/major.h>
36 #include <linux/string.h>
37 #include <linux/sysrq.h>
38 #include <linux/ioport.h>
39 #include <linux/mm.h>
40 #include <linux/init.h>
41 #include <linux/delay.h>
42 #include <linux/console.h>
43 #include <linux/platform_device.h>
44 #include <linux/serial_sci.h>
45 #include <linux/notifier.h>
46 #include <linux/cpufreq.h>
47 #include <linux/clk.h>
48 #include <linux/ctype.h>
49 #include <linux/err.h>
50 #include <linux/list.h>
51
52 #ifdef CONFIG_SUPERH
53 #include <asm/clock.h>
54 #include <asm/sh_bios.h>
55 #endif
56
57 #ifdef CONFIG_H8300
58 #include <asm/gpio.h>
59 #endif
60
61 #include "sh-sci.h"
62
63 struct sci_port {
64 struct uart_port port;
65
66 /* Port type */
67 unsigned int type;
68
69 /* Port IRQs: ERI, RXI, TXI, BRI (optional) */
70 unsigned int irqs[SCIx_NR_IRQS];
71
72 /* Port enable callback */
73 void (*enable)(struct uart_port *port);
74
75 /* Port disable callback */
76 void (*disable)(struct uart_port *port);
77
78 /* Break timer */
79 struct timer_list break_timer;
80 int break_flag;
81
82 #ifdef CONFIG_HAVE_CLK
83 /* Interface clock */
84 struct clk *iclk;
85 /* Data clock */
86 struct clk *dclk;
87 #endif
88 struct list_head node;
89 };
90
91 struct sh_sci_priv {
92 spinlock_t lock;
93 struct list_head ports;
94
95 #ifdef CONFIG_HAVE_CLK
96 struct notifier_block clk_nb;
97 #endif
98 };
99
100 /* Function prototypes */
101 static void sci_stop_tx(struct uart_port *port);
102
103 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
104
105 static struct sci_port sci_ports[SCI_NPORTS];
106 static struct uart_driver sci_uart_driver;
107
108 static inline struct sci_port *
109 to_sci_port(struct uart_port *uart)
110 {
111 return container_of(uart, struct sci_port, port);
112 }
113
114 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
115
116 #ifdef CONFIG_CONSOLE_POLL
117 static inline void handle_error(struct uart_port *port)
118 {
119 /* Clear error flags */
120 sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
121 }
122
123 static int sci_poll_get_char(struct uart_port *port)
124 {
125 unsigned short status;
126 int c;
127
128 do {
129 status = sci_in(port, SCxSR);
130 if (status & SCxSR_ERRORS(port)) {
131 handle_error(port);
132 continue;
133 }
134 } while (!(status & SCxSR_RDxF(port)));
135
136 c = sci_in(port, SCxRDR);
137
138 /* Dummy read */
139 sci_in(port, SCxSR);
140 sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
141
142 return c;
143 }
144 #endif
145
146 static void sci_poll_put_char(struct uart_port *port, unsigned char c)
147 {
148 unsigned short status;
149
150 do {
151 status = sci_in(port, SCxSR);
152 } while (!(status & SCxSR_TDxE(port)));
153
154 sci_out(port, SCxTDR, c);
155 sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
156 }
157 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
158
159 #if defined(__H8300S__)
160 enum { sci_disable, sci_enable };
161
162 static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
163 {
164 volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
165 int ch = (port->mapbase - SMR0) >> 3;
166 unsigned char mask = 1 << (ch+1);
167
168 if (ctrl == sci_disable)
169 *mstpcrl |= mask;
170 else
171 *mstpcrl &= ~mask;
172 }
173
174 static void h8300_sci_enable(struct uart_port *port)
175 {
176 h8300_sci_config(port, sci_enable);
177 }
178
179 static void h8300_sci_disable(struct uart_port *port)
180 {
181 h8300_sci_config(port, sci_disable);
182 }
183 #endif
184
185 #if defined(__H8300H__) || defined(__H8300S__)
186 static void sci_init_pins(struct uart_port *port, unsigned int cflag)
187 {
188 int ch = (port->mapbase - SMR0) >> 3;
189
190 /* set DDR regs */
191 H8300_GPIO_DDR(h8300_sci_pins[ch].port,
192 h8300_sci_pins[ch].rx,
193 H8300_GPIO_INPUT);
194 H8300_GPIO_DDR(h8300_sci_pins[ch].port,
195 h8300_sci_pins[ch].tx,
196 H8300_GPIO_OUTPUT);
197
198 /* tx mark output*/
199 H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
200 }
201 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
202 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
203 {
204 if (port->mapbase == 0xA4400000) {
205 __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
206 __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
207 } else if (port->mapbase == 0xA4410000)
208 __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
209 }
210 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
211 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
212 {
213 unsigned short data;
214
215 if (cflag & CRTSCTS) {
216 /* enable RTS/CTS */
217 if (port->mapbase == 0xa4430000) { /* SCIF0 */
218 /* Clear PTCR bit 9-2; enable all scif pins but sck */
219 data = __raw_readw(PORT_PTCR);
220 __raw_writew((data & 0xfc03), PORT_PTCR);
221 } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
222 /* Clear PVCR bit 9-2 */
223 data = __raw_readw(PORT_PVCR);
224 __raw_writew((data & 0xfc03), PORT_PVCR);
225 }
226 } else {
227 if (port->mapbase == 0xa4430000) { /* SCIF0 */
228 /* Clear PTCR bit 5-2; enable only tx and rx */
229 data = __raw_readw(PORT_PTCR);
230 __raw_writew((data & 0xffc3), PORT_PTCR);
231 } else if (port->mapbase == 0xa4438000) { /* SCIF1 */
232 /* Clear PVCR bit 5-2 */
233 data = __raw_readw(PORT_PVCR);
234 __raw_writew((data & 0xffc3), PORT_PVCR);
235 }
236 }
237 }
238 #elif defined(CONFIG_CPU_SH3)
239 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
240 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
241 {
242 unsigned short data;
243
244 /* We need to set SCPCR to enable RTS/CTS */
245 data = __raw_readw(SCPCR);
246 /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
247 __raw_writew(data & 0x0fcf, SCPCR);
248
249 if (!(cflag & CRTSCTS)) {
250 /* We need to set SCPCR to enable RTS/CTS */
251 data = __raw_readw(SCPCR);
252 /* Clear out SCP7MD1,0, SCP4MD1,0,
253 Set SCP6MD1,0 = {01} (output) */
254 __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
255
256 data = ctrl_inb(SCPDR);
257 /* Set /RTS2 (bit6) = 0 */
258 ctrl_outb(data & 0xbf, SCPDR);
259 }
260 }
261 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
262 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
263 {
264 unsigned short data;
265
266 if (port->mapbase == 0xffe00000) {
267 data = __raw_readw(PSCR);
268 data &= ~0x03cf;
269 if (!(cflag & CRTSCTS))
270 data |= 0x0340;
271
272 __raw_writew(data, PSCR);
273 }
274 }
275 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
276 defined(CONFIG_CPU_SUBTYPE_SH7780) || \
277 defined(CONFIG_CPU_SUBTYPE_SH7785) || \
278 defined(CONFIG_CPU_SUBTYPE_SH7786) || \
279 defined(CONFIG_CPU_SUBTYPE_SHX3)
280 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
281 {
282 if (!(cflag & CRTSCTS))
283 __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
284 }
285 #elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
286 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
287 {
288 if (!(cflag & CRTSCTS))
289 __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
290 }
291 #else
292 static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
293 {
294 /* Nothing to do */
295 }
296 #endif
297
298 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
299 defined(CONFIG_CPU_SUBTYPE_SH7780) || \
300 defined(CONFIG_CPU_SUBTYPE_SH7785) || \
301 defined(CONFIG_CPU_SUBTYPE_SH7786)
302 static inline int scif_txroom(struct uart_port *port)
303 {
304 return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
305 }
306
307 static inline int scif_rxroom(struct uart_port *port)
308 {
309 return sci_in(port, SCRFDR) & 0xff;
310 }
311 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
312 static inline int scif_txroom(struct uart_port *port)
313 {
314 if ((port->mapbase == 0xffe00000) ||
315 (port->mapbase == 0xffe08000)) {
316 /* SCIF0/1*/
317 return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
318 } else {
319 /* SCIF2 */
320 return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
321 }
322 }
323
324 static inline int scif_rxroom(struct uart_port *port)
325 {
326 if ((port->mapbase == 0xffe00000) ||
327 (port->mapbase == 0xffe08000)) {
328 /* SCIF0/1*/
329 return sci_in(port, SCRFDR) & 0xff;
330 } else {
331 /* SCIF2 */
332 return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
333 }
334 }
335 #else
336 static inline int scif_txroom(struct uart_port *port)
337 {
338 return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
339 }
340
341 static inline int scif_rxroom(struct uart_port *port)
342 {
343 return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
344 }
345 #endif
346
347 static inline int sci_txroom(struct uart_port *port)
348 {
349 return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
350 }
351
352 static inline int sci_rxroom(struct uart_port *port)
353 {
354 return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
355 }
356
357 /* ********************************************************************** *
358 * the interrupt related routines *
359 * ********************************************************************** */
360
361 static void sci_transmit_chars(struct uart_port *port)
362 {
363 struct circ_buf *xmit = &port->info->xmit;
364 unsigned int stopped = uart_tx_stopped(port);
365 unsigned short status;
366 unsigned short ctrl;
367 int count;
368
369 status = sci_in(port, SCxSR);
370 if (!(status & SCxSR_TDxE(port))) {
371 ctrl = sci_in(port, SCSCR);
372 if (uart_circ_empty(xmit))
373 ctrl &= ~SCI_CTRL_FLAGS_TIE;
374 else
375 ctrl |= SCI_CTRL_FLAGS_TIE;
376 sci_out(port, SCSCR, ctrl);
377 return;
378 }
379
380 if (port->type == PORT_SCI)
381 count = sci_txroom(port);
382 else
383 count = scif_txroom(port);
384
385 do {
386 unsigned char c;
387
388 if (port->x_char) {
389 c = port->x_char;
390 port->x_char = 0;
391 } else if (!uart_circ_empty(xmit) && !stopped) {
392 c = xmit->buf[xmit->tail];
393 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
394 } else {
395 break;
396 }
397
398 sci_out(port, SCxTDR, c);
399
400 port->icount.tx++;
401 } while (--count > 0);
402
403 sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
404
405 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
406 uart_write_wakeup(port);
407 if (uart_circ_empty(xmit)) {
408 sci_stop_tx(port);
409 } else {
410 ctrl = sci_in(port, SCSCR);
411
412 if (port->type != PORT_SCI) {
413 sci_in(port, SCxSR); /* Dummy read */
414 sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
415 }
416
417 ctrl |= SCI_CTRL_FLAGS_TIE;
418 sci_out(port, SCSCR, ctrl);
419 }
420 }
421
422 /* On SH3, SCIF may read end-of-break as a space->mark char */
423 #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
424
425 static inline void sci_receive_chars(struct uart_port *port)
426 {
427 struct sci_port *sci_port = to_sci_port(port);
428 struct tty_struct *tty = port->info->port.tty;
429 int i, count, copied = 0;
430 unsigned short status;
431 unsigned char flag;
432
433 status = sci_in(port, SCxSR);
434 if (!(status & SCxSR_RDxF(port)))
435 return;
436
437 while (1) {
438 if (port->type == PORT_SCI)
439 count = sci_rxroom(port);
440 else
441 count = scif_rxroom(port);
442
443 /* Don't copy more bytes than there is room for in the buffer */
444 count = tty_buffer_request_room(tty, count);
445
446 /* If for any reason we can't copy more data, we're done! */
447 if (count == 0)
448 break;
449
450 if (port->type == PORT_SCI) {
451 char c = sci_in(port, SCxRDR);
452 if (uart_handle_sysrq_char(port, c) ||
453 sci_port->break_flag)
454 count = 0;
455 else
456 tty_insert_flip_char(tty, c, TTY_NORMAL);
457 } else {
458 for (i = 0; i < count; i++) {
459 char c = sci_in(port, SCxRDR);
460 status = sci_in(port, SCxSR);
461 #if defined(CONFIG_CPU_SH3)
462 /* Skip "chars" during break */
463 if (sci_port->break_flag) {
464 if ((c == 0) &&
465 (status & SCxSR_FER(port))) {
466 count--; i--;
467 continue;
468 }
469
470 /* Nonzero => end-of-break */
471 dev_dbg(port->dev, "debounce<%02x>\n", c);
472 sci_port->break_flag = 0;
473
474 if (STEPFN(c)) {
475 count--; i--;
476 continue;
477 }
478 }
479 #endif /* CONFIG_CPU_SH3 */
480 if (uart_handle_sysrq_char(port, c)) {
481 count--; i--;
482 continue;
483 }
484
485 /* Store data and status */
486 if (status&SCxSR_FER(port)) {
487 flag = TTY_FRAME;
488 dev_notice(port->dev, "frame error\n");
489 } else if (status&SCxSR_PER(port)) {
490 flag = TTY_PARITY;
491 dev_notice(port->dev, "parity error\n");
492 } else
493 flag = TTY_NORMAL;
494
495 tty_insert_flip_char(tty, c, flag);
496 }
497 }
498
499 sci_in(port, SCxSR); /* dummy read */
500 sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
501
502 copied += count;
503 port->icount.rx += count;
504 }
505
506 if (copied) {
507 /* Tell the rest of the system the news. New characters! */
508 tty_flip_buffer_push(tty);
509 } else {
510 sci_in(port, SCxSR); /* dummy read */
511 sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
512 }
513 }
514
515 #define SCI_BREAK_JIFFIES (HZ/20)
516 /* The sci generates interrupts during the break,
517 * 1 per millisecond or so during the break period, for 9600 baud.
518 * So dont bother disabling interrupts.
519 * But dont want more than 1 break event.
520 * Use a kernel timer to periodically poll the rx line until
521 * the break is finished.
522 */
523 static void sci_schedule_break_timer(struct sci_port *port)
524 {
525 port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES;
526 add_timer(&port->break_timer);
527 }
528 /* Ensure that two consecutive samples find the break over. */
529 static void sci_break_timer(unsigned long data)
530 {
531 struct sci_port *port = (struct sci_port *)data;
532
533 if (sci_rxd_in(&port->port) == 0) {
534 port->break_flag = 1;
535 sci_schedule_break_timer(port);
536 } else if (port->break_flag == 1) {
537 /* break is over. */
538 port->break_flag = 2;
539 sci_schedule_break_timer(port);
540 } else
541 port->break_flag = 0;
542 }
543
544 static inline int sci_handle_errors(struct uart_port *port)
545 {
546 int copied = 0;
547 unsigned short status = sci_in(port, SCxSR);
548 struct tty_struct *tty = port->info->port.tty;
549
550 if (status & SCxSR_ORER(port)) {
551 /* overrun error */
552 if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
553 copied++;
554
555 dev_notice(port->dev, "overrun error");
556 }
557
558 if (status & SCxSR_FER(port)) {
559 if (sci_rxd_in(port) == 0) {
560 /* Notify of BREAK */
561 struct sci_port *sci_port = to_sci_port(port);
562
563 if (!sci_port->break_flag) {
564 sci_port->break_flag = 1;
565 sci_schedule_break_timer(sci_port);
566
567 /* Do sysrq handling. */
568 if (uart_handle_break(port))
569 return 0;
570
571 dev_dbg(port->dev, "BREAK detected\n");
572
573 if (tty_insert_flip_char(tty, 0, TTY_BREAK))
574 copied++;
575 }
576
577 } else {
578 /* frame error */
579 if (tty_insert_flip_char(tty, 0, TTY_FRAME))
580 copied++;
581
582 dev_notice(port->dev, "frame error\n");
583 }
584 }
585
586 if (status & SCxSR_PER(port)) {
587 /* parity error */
588 if (tty_insert_flip_char(tty, 0, TTY_PARITY))
589 copied++;
590
591 dev_notice(port->dev, "parity error");
592 }
593
594 if (copied)
595 tty_flip_buffer_push(tty);
596
597 return copied;
598 }
599
600 static inline int sci_handle_fifo_overrun(struct uart_port *port)
601 {
602 struct tty_struct *tty = port->info->port.tty;
603 int copied = 0;
604
605 if (port->type != PORT_SCIF)
606 return 0;
607
608 if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
609 sci_out(port, SCLSR, 0);
610
611 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
612 tty_flip_buffer_push(tty);
613
614 dev_notice(port->dev, "overrun error\n");
615 copied++;
616 }
617
618 return copied;
619 }
620
621 static inline int sci_handle_breaks(struct uart_port *port)
622 {
623 int copied = 0;
624 unsigned short status = sci_in(port, SCxSR);
625 struct tty_struct *tty = port->info->port.tty;
626 struct sci_port *s = to_sci_port(port);
627
628 if (uart_handle_break(port))
629 return 0;
630
631 if (!s->break_flag && status & SCxSR_BRK(port)) {
632 #if defined(CONFIG_CPU_SH3)
633 /* Debounce break */
634 s->break_flag = 1;
635 #endif
636 /* Notify of BREAK */
637 if (tty_insert_flip_char(tty, 0, TTY_BREAK))
638 copied++;
639
640 dev_dbg(port->dev, "BREAK detected\n");
641 }
642
643 if (copied)
644 tty_flip_buffer_push(tty);
645
646 copied += sci_handle_fifo_overrun(port);
647
648 return copied;
649 }
650
651 static irqreturn_t sci_rx_interrupt(int irq, void *port)
652 {
653 /* I think sci_receive_chars has to be called irrespective
654 * of whether the I_IXOFF is set, otherwise, how is the interrupt
655 * to be disabled?
656 */
657 sci_receive_chars(port);
658
659 return IRQ_HANDLED;
660 }
661
662 static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
663 {
664 struct uart_port *port = ptr;
665
666 spin_lock_irq(&port->lock);
667 sci_transmit_chars(port);
668 spin_unlock_irq(&port->lock);
669
670 return IRQ_HANDLED;
671 }
672
673 static irqreturn_t sci_er_interrupt(int irq, void *ptr)
674 {
675 struct uart_port *port = ptr;
676
677 /* Handle errors */
678 if (port->type == PORT_SCI) {
679 if (sci_handle_errors(port)) {
680 /* discard character in rx buffer */
681 sci_in(port, SCxSR);
682 sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
683 }
684 } else {
685 sci_handle_fifo_overrun(port);
686 sci_rx_interrupt(irq, ptr);
687 }
688
689 sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
690
691 /* Kick the transmission */
692 sci_tx_interrupt(irq, ptr);
693
694 return IRQ_HANDLED;
695 }
696
697 static irqreturn_t sci_br_interrupt(int irq, void *ptr)
698 {
699 struct uart_port *port = ptr;
700
701 /* Handle BREAKs */
702 sci_handle_breaks(port);
703 sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
704
705 return IRQ_HANDLED;
706 }
707
708 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
709 {
710 unsigned short ssr_status, scr_status, err_enabled;
711 struct uart_port *port = ptr;
712 irqreturn_t ret = IRQ_NONE;
713
714 ssr_status = sci_in(port, SCxSR);
715 scr_status = sci_in(port, SCSCR);
716 err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
717
718 /* Tx Interrupt */
719 if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
720 ret = sci_tx_interrupt(irq, ptr);
721 /* Rx Interrupt */
722 if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
723 ret = sci_rx_interrupt(irq, ptr);
724 /* Error Interrupt */
725 if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
726 ret = sci_er_interrupt(irq, ptr);
727 /* Break Interrupt */
728 if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
729 ret = sci_br_interrupt(irq, ptr);
730
731 return ret;
732 }
733
734 #ifdef CONFIG_HAVE_CLK
735 /*
736 * Here we define a transistion notifier so that we can update all of our
737 * ports' baud rate when the peripheral clock changes.
738 */
739 static int sci_notifier(struct notifier_block *self,
740 unsigned long phase, void *p)
741 {
742 struct sh_sci_priv *priv = container_of(self,
743 struct sh_sci_priv, clk_nb);
744 struct sci_port *sci_port;
745 unsigned long flags;
746
747 if ((phase == CPUFREQ_POSTCHANGE) ||
748 (phase == CPUFREQ_RESUMECHANGE)) {
749 spin_lock_irqsave(&priv->lock, flags);
750 list_for_each_entry(sci_port, &priv->ports, node)
751 sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
752
753 spin_unlock_irqrestore(&priv->lock, flags);
754 }
755
756 return NOTIFY_OK;
757 }
758
759 static void sci_clk_enable(struct uart_port *port)
760 {
761 struct sci_port *sci_port = to_sci_port(port);
762
763 clk_enable(sci_port->dclk);
764 sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
765
766 if (sci_port->iclk)
767 clk_enable(sci_port->iclk);
768 }
769
770 static void sci_clk_disable(struct uart_port *port)
771 {
772 struct sci_port *sci_port = to_sci_port(port);
773
774 if (sci_port->iclk)
775 clk_disable(sci_port->iclk);
776
777 clk_disable(sci_port->dclk);
778 }
779 #endif
780
781 static int sci_request_irq(struct sci_port *port)
782 {
783 int i;
784 irqreturn_t (*handlers[4])(int irq, void *ptr) = {
785 sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
786 sci_br_interrupt,
787 };
788 const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
789 "SCI Transmit Data Empty", "SCI Break" };
790
791 if (port->irqs[0] == port->irqs[1]) {
792 if (unlikely(!port->irqs[0]))
793 return -ENODEV;
794
795 if (request_irq(port->irqs[0], sci_mpxed_interrupt,
796 IRQF_DISABLED, "sci", port)) {
797 dev_err(port->port.dev, "Can't allocate IRQ\n");
798 return -ENODEV;
799 }
800 } else {
801 for (i = 0; i < ARRAY_SIZE(handlers); i++) {
802 if (unlikely(!port->irqs[i]))
803 continue;
804
805 if (request_irq(port->irqs[i], handlers[i],
806 IRQF_DISABLED, desc[i], port)) {
807 dev_err(port->port.dev, "Can't allocate IRQ\n");
808 return -ENODEV;
809 }
810 }
811 }
812
813 return 0;
814 }
815
816 static void sci_free_irq(struct sci_port *port)
817 {
818 int i;
819
820 if (port->irqs[0] == port->irqs[1])
821 free_irq(port->irqs[0], port);
822 else {
823 for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
824 if (!port->irqs[i])
825 continue;
826
827 free_irq(port->irqs[i], port);
828 }
829 }
830 }
831
832 static unsigned int sci_tx_empty(struct uart_port *port)
833 {
834 /* Can't detect */
835 return TIOCSER_TEMT;
836 }
837
838 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
839 {
840 /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
841 /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
842 /* If you have signals for DTR and DCD, please implement here. */
843 }
844
845 static unsigned int sci_get_mctrl(struct uart_port *port)
846 {
847 /* This routine is used for geting signals of: DTR, DCD, DSR, RI,
848 and CTS/RTS */
849
850 return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
851 }
852
853 static void sci_start_tx(struct uart_port *port)
854 {
855 unsigned short ctrl;
856
857 /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
858 ctrl = sci_in(port, SCSCR);
859 ctrl |= SCI_CTRL_FLAGS_TIE;
860 sci_out(port, SCSCR, ctrl);
861 }
862
863 static void sci_stop_tx(struct uart_port *port)
864 {
865 unsigned short ctrl;
866
867 /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
868 ctrl = sci_in(port, SCSCR);
869 ctrl &= ~SCI_CTRL_FLAGS_TIE;
870 sci_out(port, SCSCR, ctrl);
871 }
872
873 static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
874 {
875 unsigned short ctrl;
876
877 /* Set RIE (Receive Interrupt Enable) bit in SCSCR */
878 ctrl = sci_in(port, SCSCR);
879 ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
880 sci_out(port, SCSCR, ctrl);
881 }
882
883 static void sci_stop_rx(struct uart_port *port)
884 {
885 unsigned short ctrl;
886
887 /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
888 ctrl = sci_in(port, SCSCR);
889 ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
890 sci_out(port, SCSCR, ctrl);
891 }
892
893 static void sci_enable_ms(struct uart_port *port)
894 {
895 /* Nothing here yet .. */
896 }
897
898 static void sci_break_ctl(struct uart_port *port, int break_state)
899 {
900 /* Nothing here yet .. */
901 }
902
903 static int sci_startup(struct uart_port *port)
904 {
905 struct sci_port *s = to_sci_port(port);
906
907 if (s->enable)
908 s->enable(port);
909
910 sci_request_irq(s);
911 sci_start_tx(port);
912 sci_start_rx(port, 1);
913
914 return 0;
915 }
916
917 static void sci_shutdown(struct uart_port *port)
918 {
919 struct sci_port *s = to_sci_port(port);
920
921 sci_stop_rx(port);
922 sci_stop_tx(port);
923 sci_free_irq(s);
924
925 if (s->disable)
926 s->disable(port);
927 }
928
929 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
930 struct ktermios *old)
931 {
932 unsigned int status, baud, smr_val;
933 int t = -1;
934
935 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
936 if (likely(baud))
937 t = SCBRR_VALUE(baud, port->uartclk);
938
939 do {
940 status = sci_in(port, SCxSR);
941 } while (!(status & SCxSR_TEND(port)));
942
943 sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
944
945 if (port->type != PORT_SCI)
946 sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
947
948 smr_val = sci_in(port, SCSMR) & 3;
949 if ((termios->c_cflag & CSIZE) == CS7)
950 smr_val |= 0x40;
951 if (termios->c_cflag & PARENB)
952 smr_val |= 0x20;
953 if (termios->c_cflag & PARODD)
954 smr_val |= 0x30;
955 if (termios->c_cflag & CSTOPB)
956 smr_val |= 0x08;
957
958 uart_update_timeout(port, termios->c_cflag, baud);
959
960 sci_out(port, SCSMR, smr_val);
961
962 if (t > 0) {
963 if (t >= 256) {
964 sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
965 t >>= 2;
966 } else
967 sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
968
969 sci_out(port, SCBRR, t);
970 udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
971 }
972
973 sci_init_pins(port, termios->c_cflag);
974 sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
975
976 sci_out(port, SCSCR, SCSCR_INIT(port));
977
978 if ((termios->c_cflag & CREAD) != 0)
979 sci_start_rx(port, 0);
980 }
981
982 static const char *sci_type(struct uart_port *port)
983 {
984 switch (port->type) {
985 case PORT_IRDA:
986 return "irda";
987 case PORT_SCI:
988 return "sci";
989 case PORT_SCIF:
990 return "scif";
991 case PORT_SCIFA:
992 return "scifa";
993 }
994
995 return NULL;
996 }
997
998 static void sci_release_port(struct uart_port *port)
999 {
1000 /* Nothing here yet .. */
1001 }
1002
1003 static int sci_request_port(struct uart_port *port)
1004 {
1005 /* Nothing here yet .. */
1006 return 0;
1007 }
1008
1009 static void sci_config_port(struct uart_port *port, int flags)
1010 {
1011 struct sci_port *s = to_sci_port(port);
1012
1013 port->type = s->type;
1014
1015 if (port->membase)
1016 return;
1017
1018 if (port->flags & UPF_IOREMAP) {
1019 port->membase = ioremap_nocache(port->mapbase, 0x40);
1020
1021 if (IS_ERR(port->membase))
1022 dev_err(port->dev, "can't remap port#%d\n", port->line);
1023 } else {
1024 /*
1025 * For the simple (and majority of) cases where we don't
1026 * need to do any remapping, just cast the cookie
1027 * directly.
1028 */
1029 port->membase = (void __iomem *)port->mapbase;
1030 }
1031 }
1032
1033 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
1034 {
1035 struct sci_port *s = to_sci_port(port);
1036
1037 if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
1038 return -EINVAL;
1039 if (ser->baud_base < 2400)
1040 /* No paper tape reader for Mitch.. */
1041 return -EINVAL;
1042
1043 return 0;
1044 }
1045
1046 static struct uart_ops sci_uart_ops = {
1047 .tx_empty = sci_tx_empty,
1048 .set_mctrl = sci_set_mctrl,
1049 .get_mctrl = sci_get_mctrl,
1050 .start_tx = sci_start_tx,
1051 .stop_tx = sci_stop_tx,
1052 .stop_rx = sci_stop_rx,
1053 .enable_ms = sci_enable_ms,
1054 .break_ctl = sci_break_ctl,
1055 .startup = sci_startup,
1056 .shutdown = sci_shutdown,
1057 .set_termios = sci_set_termios,
1058 .type = sci_type,
1059 .release_port = sci_release_port,
1060 .request_port = sci_request_port,
1061 .config_port = sci_config_port,
1062 .verify_port = sci_verify_port,
1063 #ifdef CONFIG_CONSOLE_POLL
1064 .poll_get_char = sci_poll_get_char,
1065 .poll_put_char = sci_poll_put_char,
1066 #endif
1067 };
1068
1069 static void __devinit sci_init_single(struct platform_device *dev,
1070 struct sci_port *sci_port,
1071 unsigned int index,
1072 struct plat_sci_port *p)
1073 {
1074 sci_port->port.ops = &sci_uart_ops;
1075 sci_port->port.iotype = UPIO_MEM;
1076 sci_port->port.line = index;
1077 sci_port->port.fifosize = 1;
1078
1079 #if defined(__H8300H__) || defined(__H8300S__)
1080 #ifdef __H8300S__
1081 sci_port->enable = h8300_sci_enable;
1082 sci_port->disable = h8300_sci_disable;
1083 #endif
1084 sci_port->port.uartclk = CONFIG_CPU_CLOCK;
1085 #elif defined(CONFIG_HAVE_CLK)
1086 sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
1087 sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
1088 sci_port->enable = sci_clk_enable;
1089 sci_port->disable = sci_clk_disable;
1090 #else
1091 #error "Need a valid uartclk"
1092 #endif
1093
1094 sci_port->break_timer.data = (unsigned long)sci_port;
1095 sci_port->break_timer.function = sci_break_timer;
1096 init_timer(&sci_port->break_timer);
1097
1098 sci_port->port.mapbase = p->mapbase;
1099 sci_port->port.membase = p->membase;
1100
1101 sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
1102 sci_port->port.flags = p->flags;
1103 sci_port->port.dev = &dev->dev;
1104 sci_port->type = sci_port->port.type = p->type;
1105
1106 memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
1107
1108 }
1109
1110 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
1111 static struct tty_driver *serial_console_device(struct console *co, int *index)
1112 {
1113 struct uart_driver *p = &sci_uart_driver;
1114 *index = co->index;
1115 return p->tty_driver;
1116 }
1117
1118 static void serial_console_putchar(struct uart_port *port, int ch)
1119 {
1120 sci_poll_put_char(port, ch);
1121 }
1122
1123 /*
1124 * Print a string to the serial port trying not to disturb
1125 * any possible real use of the port...
1126 */
1127 static void serial_console_write(struct console *co, const char *s,
1128 unsigned count)
1129 {
1130 struct uart_port *port = co->data;
1131 struct sci_port *sci_port = to_sci_port(port);
1132 unsigned short bits;
1133
1134 if (sci_port->enable)
1135 sci_port->enable(port);
1136
1137 uart_console_write(port, s, count, serial_console_putchar);
1138
1139 /* wait until fifo is empty and last bit has been transmitted */
1140 bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
1141 while ((sci_in(port, SCxSR) & bits) != bits)
1142 cpu_relax();
1143
1144 if (sci_port->disable);
1145 sci_port->disable(port);
1146 }
1147
1148 static int __init serial_console_setup(struct console *co, char *options)
1149 {
1150 struct sci_port *sci_port;
1151 struct uart_port *port;
1152 int baud = 115200;
1153 int bits = 8;
1154 int parity = 'n';
1155 int flow = 'n';
1156 int ret;
1157
1158 /*
1159 * Check whether an invalid uart number has been specified, and
1160 * if so, search for the first available port that does have
1161 * console support.
1162 */
1163 if (co->index >= SCI_NPORTS)
1164 co->index = 0;
1165
1166 sci_port = &sci_ports[co->index];
1167 port = &sci_port->port;
1168 co->data = port;
1169
1170 /*
1171 * Also need to check port->type, we don't actually have any
1172 * UPIO_PORT ports, but uart_report_port() handily misreports
1173 * it anyways if we don't have a port available by the time this is
1174 * called.
1175 */
1176 if (!port->type)
1177 return -ENODEV;
1178
1179 sci_config_port(port, 0);
1180
1181 if (sci_port->enable)
1182 sci_port->enable(port);
1183
1184 if (options)
1185 uart_parse_options(options, &baud, &parity, &bits, &flow);
1186
1187 ret = uart_set_options(port, co, baud, parity, bits, flow);
1188 #if defined(__H8300H__) || defined(__H8300S__)
1189 /* disable rx interrupt */
1190 if (ret == 0)
1191 sci_stop_rx(port);
1192 #endif
1193 /* TODO: disable clock */
1194 return ret;
1195 }
1196
1197 static struct console serial_console = {
1198 .name = "ttySC",
1199 .device = serial_console_device,
1200 .write = serial_console_write,
1201 .setup = serial_console_setup,
1202 .flags = CON_PRINTBUFFER,
1203 .index = -1,
1204 };
1205
1206 static int __init sci_console_init(void)
1207 {
1208 register_console(&serial_console);
1209 return 0;
1210 }
1211 console_initcall(sci_console_init);
1212 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
1213
1214 #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
1215 #define SCI_CONSOLE (&serial_console)
1216 #else
1217 #define SCI_CONSOLE 0
1218 #endif
1219
1220 static char banner[] __initdata =
1221 KERN_INFO "SuperH SCI(F) driver initialized\n";
1222
1223 static struct uart_driver sci_uart_driver = {
1224 .owner = THIS_MODULE,
1225 .driver_name = "sci",
1226 .dev_name = "ttySC",
1227 .major = SCI_MAJOR,
1228 .minor = SCI_MINOR_START,
1229 .nr = SCI_NPORTS,
1230 .cons = SCI_CONSOLE,
1231 };
1232
1233
1234 static int sci_remove(struct platform_device *dev)
1235 {
1236 struct sh_sci_priv *priv = platform_get_drvdata(dev);
1237 struct sci_port *p;
1238 unsigned long flags;
1239
1240 #ifdef CONFIG_HAVE_CLK
1241 cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
1242 #endif
1243
1244 spin_lock_irqsave(&priv->lock, flags);
1245 list_for_each_entry(p, &priv->ports, node)
1246 uart_remove_one_port(&sci_uart_driver, &p->port);
1247
1248 spin_unlock_irqrestore(&priv->lock, flags);
1249
1250 kfree(priv);
1251 return 0;
1252 }
1253
1254 static int __devinit sci_probe_single(struct platform_device *dev,
1255 unsigned int index,
1256 struct plat_sci_port *p,
1257 struct sci_port *sciport)
1258 {
1259 struct sh_sci_priv *priv = platform_get_drvdata(dev);
1260 unsigned long flags;
1261 int ret;
1262
1263 /* Sanity check */
1264 if (unlikely(index >= SCI_NPORTS)) {
1265 dev_notice(&dev->dev, "Attempting to register port "
1266 "%d when only %d are available.\n",
1267 index+1, SCI_NPORTS);
1268 dev_notice(&dev->dev, "Consider bumping "
1269 "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
1270 return 0;
1271 }
1272
1273 sci_init_single(dev, sciport, index, p);
1274
1275 ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
1276 if (ret)
1277 return ret;
1278
1279 INIT_LIST_HEAD(&sciport->node);
1280
1281 spin_lock_irqsave(&priv->lock, flags);
1282 list_add(&sciport->node, &priv->ports);
1283 spin_unlock_irqrestore(&priv->lock, flags);
1284
1285 return 0;
1286 }
1287
1288 /*
1289 * Register a set of serial devices attached to a platform device. The
1290 * list is terminated with a zero flags entry, which means we expect
1291 * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need
1292 * remapping (such as sh64) should also set UPF_IOREMAP.
1293 */
1294 static int __devinit sci_probe(struct platform_device *dev)
1295 {
1296 struct plat_sci_port *p = dev->dev.platform_data;
1297 struct sh_sci_priv *priv;
1298 int i, ret = -EINVAL;
1299
1300 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1301 if (!priv)
1302 return -ENOMEM;
1303
1304 INIT_LIST_HEAD(&priv->ports);
1305 spin_lock_init(&priv->lock);
1306 platform_set_drvdata(dev, priv);
1307
1308 #ifdef CONFIG_HAVE_CLK
1309 priv->clk_nb.notifier_call = sci_notifier;
1310 cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
1311 #endif
1312
1313 if (dev->id != -1) {
1314 ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
1315 if (ret)
1316 goto err_unreg;
1317 } else {
1318 for (i = 0; p && p->flags != 0; p++, i++) {
1319 ret = sci_probe_single(dev, i, p, &sci_ports[i]);
1320 if (ret)
1321 goto err_unreg;
1322 }
1323 }
1324
1325 #ifdef CONFIG_SH_STANDARD_BIOS
1326 sh_bios_gdb_detach();
1327 #endif
1328
1329 return 0;
1330
1331 err_unreg:
1332 sci_remove(dev);
1333 return ret;
1334 }
1335
1336 static int sci_suspend(struct device *dev)
1337 {
1338 struct sh_sci_priv *priv = dev_get_drvdata(dev);
1339 struct sci_port *p;
1340 unsigned long flags;
1341
1342 spin_lock_irqsave(&priv->lock, flags);
1343 list_for_each_entry(p, &priv->ports, node)
1344 uart_suspend_port(&sci_uart_driver, &p->port);
1345 spin_unlock_irqrestore(&priv->lock, flags);
1346
1347 return 0;
1348 }
1349
1350 static int sci_resume(struct device *dev)
1351 {
1352 struct sh_sci_priv *priv = dev_get_drvdata(dev);
1353 struct sci_port *p;
1354 unsigned long flags;
1355
1356 spin_lock_irqsave(&priv->lock, flags);
1357 list_for_each_entry(p, &priv->ports, node)
1358 uart_resume_port(&sci_uart_driver, &p->port);
1359 spin_unlock_irqrestore(&priv->lock, flags);
1360
1361 return 0;
1362 }
1363
1364 static struct dev_pm_ops sci_dev_pm_ops = {
1365 .suspend = sci_suspend,
1366 .resume = sci_resume,
1367 };
1368
1369 static struct platform_driver sci_driver = {
1370 .probe = sci_probe,
1371 .remove = __devexit_p(sci_remove),
1372 .driver = {
1373 .name = "sh-sci",
1374 .owner = THIS_MODULE,
1375 .pm = &sci_dev_pm_ops,
1376 },
1377 };
1378
1379 static int __init sci_init(void)
1380 {
1381 int ret;
1382
1383 printk(banner);
1384
1385 ret = uart_register_driver(&sci_uart_driver);
1386 if (likely(ret == 0)) {
1387 ret = platform_driver_register(&sci_driver);
1388 if (unlikely(ret))
1389 uart_unregister_driver(&sci_uart_driver);
1390 }
1391
1392 return ret;
1393 }
1394
1395 static void __exit sci_exit(void)
1396 {
1397 platform_driver_unregister(&sci_driver);
1398 uart_unregister_driver(&sci_uart_driver);
1399 }
1400
1401 module_init(sci_init);
1402 module_exit(sci_exit);
1403
1404 MODULE_LICENSE("GPL");
1405 MODULE_ALIAS("platform:sh-sci");
Verdex Pro support