[PATCH] USB: remove .owner field from struct usb_driver
[linux-2.6/verdex.git] / drivers / usb / net / zaurus.c
blob9c5ab251370c5b78e578b24e0d1aaafbe0d61744
1 /*
2 * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
3 * Copyright (C) 2002-2005 by David Brownell
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 // #define DEBUG // error path messages, extra info
21 // #define VERBOSE // more; success messages
23 #include <linux/config.h>
24 #include <linux/module.h>
25 #include <linux/sched.h>
26 #include <linux/init.h>
27 #include <linux/netdevice.h>
28 #include <linux/ethtool.h>
29 #include <linux/workqueue.h>
30 #include <linux/mii.h>
31 #include <linux/crc32.h>
32 #include <linux/usb.h>
33 #include <linux/usb_cdc.h>
35 #include "usbnet.h"
39 * All known Zaurii lie about their standards conformance. At least
40 * the earliest SA-1100 models lie by saying they support CDC Ethernet.
41 * Some later models (especially PXA-25x and PXA-27x based ones) lie
42 * and say they support CDC MDLM (for access to cell phone modems).
44 * There are non-Zaurus products that use these same protocols too.
46 * The annoying thing is that at the same time Sharp was developing
47 * that annoying standards-breaking software, the Linux community had
48 * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
49 * That is, the same functionality but not violating standards.
51 * The CDC Ethernet nonconformance points are troublesome to hosts
52 * with a true CDC Ethernet implementation:
53 * - Framing appends a CRC, which the spec says drivers "must not" do;
54 * - Transfers data in altsetting zero, instead of altsetting 1;
55 * - All these peripherals use the same ethernet address.
57 * The CDC MDLM nonconformance is less immediately troublesome, since all
58 * MDLM implementations are quasi-proprietary anyway.
61 static struct sk_buff *
62 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
64 int padlen;
65 struct sk_buff *skb2;
67 padlen = 2;
68 if (!skb_cloned(skb)) {
69 int tailroom = skb_tailroom(skb);
70 if ((padlen + 4) <= tailroom)
71 goto done;
73 skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
74 dev_kfree_skb_any(skb);
75 skb = skb2;
76 if (skb) {
77 u32 fcs;
78 done:
79 fcs = crc32_le(~0, skb->data, skb->len);
80 fcs = ~fcs;
82 *skb_put (skb, 1) = fcs & 0xff;
83 *skb_put (skb, 1) = (fcs>> 8) & 0xff;
84 *skb_put (skb, 1) = (fcs>>16) & 0xff;
85 *skb_put (skb, 1) = (fcs>>24) & 0xff;
87 return skb;
90 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
92 /* Belcarra's funky framing has other options; mostly
93 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
95 dev->net->hard_header_len += 6;
96 dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
97 return usbnet_generic_cdc_bind(dev, intf);
100 /* PDA style devices are always connected if present */
101 static int always_connected (struct usbnet *dev)
103 return 0;
106 static const struct driver_info zaurus_sl5x00_info = {
107 .description = "Sharp Zaurus SL-5x00",
108 .flags = FLAG_FRAMING_Z,
109 .check_connect = always_connected,
110 .bind = zaurus_bind,
111 .unbind = usbnet_cdc_unbind,
112 .tx_fixup = zaurus_tx_fixup,
114 #define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info)
116 static const struct driver_info zaurus_pxa_info = {
117 .description = "Sharp Zaurus, PXA-2xx based",
118 .flags = FLAG_FRAMING_Z,
119 .check_connect = always_connected,
120 .bind = zaurus_bind,
121 .unbind = usbnet_cdc_unbind,
122 .tx_fixup = zaurus_tx_fixup,
124 #define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info)
126 static const struct driver_info olympus_mxl_info = {
127 .description = "Olympus R1000",
128 .flags = FLAG_FRAMING_Z,
129 .check_connect = always_connected,
130 .bind = zaurus_bind,
131 .unbind = usbnet_cdc_unbind,
132 .tx_fixup = zaurus_tx_fixup,
134 #define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info)
137 /* Some more recent products using Lineo/Belcarra code will wrongly claim
138 * CDC MDLM conformance. They aren't conformant: data endpoints live
139 * in the control interface, there's no data interface, and it's not used
140 * to talk to a cell phone radio. But at least we can detect these two
141 * pseudo-classes, rather than growing this product list with entries for
142 * each new nonconformant product (sigh).
144 static const u8 safe_guid[16] = {
145 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
146 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
148 static const u8 blan_guid[16] = {
149 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
150 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
153 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
155 u8 *buf = intf->cur_altsetting->extra;
156 int len = intf->cur_altsetting->extralen;
157 struct usb_cdc_mdlm_desc *desc = NULL;
158 struct usb_cdc_mdlm_detail_desc *detail = NULL;
160 while (len > 3) {
161 if (buf [1] != USB_DT_CS_INTERFACE)
162 goto next_desc;
164 /* use bDescriptorSubType, and just verify that we get a
165 * "BLAN" (or "SAFE") descriptor.
167 switch (buf [2]) {
168 case USB_CDC_MDLM_TYPE:
169 if (desc) {
170 dev_dbg(&intf->dev, "extra MDLM\n");
171 goto bad_desc;
173 desc = (void *) buf;
174 if (desc->bLength != sizeof *desc) {
175 dev_dbg(&intf->dev, "MDLM len %u\n",
176 desc->bLength);
177 goto bad_desc;
179 /* expect bcdVersion 1.0, ignore */
180 if (memcmp(&desc->bGUID, blan_guid, 16)
181 && memcmp(&desc->bGUID, safe_guid, 16) ) {
182 /* hey, this one might _really_ be MDLM! */
183 dev_dbg(&intf->dev, "MDLM guid\n");
184 goto bad_desc;
186 break;
187 case USB_CDC_MDLM_DETAIL_TYPE:
188 if (detail) {
189 dev_dbg(&intf->dev, "extra MDLM detail\n");
190 goto bad_desc;
192 detail = (void *) buf;
193 switch (detail->bGuidDescriptorType) {
194 case 0: /* "SAFE" */
195 if (detail->bLength != (sizeof *detail + 2))
196 goto bad_detail;
197 break;
198 case 1: /* "BLAN" */
199 if (detail->bLength != (sizeof *detail + 3))
200 goto bad_detail;
201 break;
202 default:
203 goto bad_detail;
206 /* assuming we either noticed BLAN already, or will
207 * find it soon, there are some data bytes here:
208 * - bmNetworkCapabilities (unused)
209 * - bmDataCapabilities (bits, see below)
210 * - bPad (ignored, for PADAFTER -- BLAN-only)
211 * bits are:
212 * - 0x01 -- Zaurus framing (add CRC)
213 * - 0x02 -- PADBEFORE (CRC includes some padding)
214 * - 0x04 -- PADAFTER (some padding after CRC)
215 * - 0x08 -- "fermat" packet mangling (for hw bugs)
216 * the PADBEFORE appears not to matter; we interop
217 * with devices that use it and those that don't.
219 if ((detail->bDetailData[1] & ~0x02) != 0x01) {
220 /* bmDataCapabilites == 0 would be fine too,
221 * but framing is minidriver-coupled for now.
223 bad_detail:
224 dev_dbg(&intf->dev,
225 "bad MDLM detail, %d %d %d\n",
226 detail->bLength,
227 detail->bDetailData[0],
228 detail->bDetailData[2]);
229 goto bad_desc;
231 break;
233 next_desc:
234 len -= buf [0]; /* bLength */
235 buf += buf [0];
238 if (!desc || !detail) {
239 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
240 desc ? "" : "func ",
241 detail ? "" : "detail ");
242 goto bad_desc;
245 /* There's probably a CDC Ethernet descriptor there, but we can't
246 * rely on the Ethernet address it provides since not all vendors
247 * bother to make it unique. Likewise there's no point in tracking
248 * of the CDC event notifications.
250 return usbnet_get_endpoints(dev, intf);
252 bad_desc:
253 dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
254 return -ENODEV;
257 static const struct driver_info bogus_mdlm_info = {
258 .description = "pseudo-MDLM (BLAN) device",
259 .flags = FLAG_FRAMING_Z,
260 .check_connect = always_connected,
261 .tx_fixup = zaurus_tx_fixup,
262 .bind = blan_mdlm_bind,
265 static const struct usb_device_id products [] = {
266 #define ZAURUS_MASTER_INTERFACE \
267 .bInterfaceClass = USB_CLASS_COMM, \
268 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
269 .bInterfaceProtocol = USB_CDC_PROTO_NONE
271 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
273 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
274 | USB_DEVICE_ID_MATCH_DEVICE,
275 .idVendor = 0x04DD,
276 .idProduct = 0x8004,
277 ZAURUS_MASTER_INTERFACE,
278 .driver_info = ZAURUS_STRONGARM_INFO,
281 /* PXA-2xx based models are also lying-about-cdc. If you add any
282 * more devices that claim to be CDC Ethernet, make sure they get
283 * added to the blacklist in cdc_ether too.
285 * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries,
286 * unlike the older ones with 2.4 "embedix" kernels.
289 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
290 | USB_DEVICE_ID_MATCH_DEVICE,
291 .idVendor = 0x04DD,
292 .idProduct = 0x8005, /* A-300 */
293 ZAURUS_MASTER_INTERFACE,
294 .driver_info = ZAURUS_PXA_INFO,
295 }, {
296 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
297 | USB_DEVICE_ID_MATCH_DEVICE,
298 .idVendor = 0x04DD,
299 .idProduct = 0x8006, /* B-500/SL-5600 */
300 ZAURUS_MASTER_INTERFACE,
301 .driver_info = ZAURUS_PXA_INFO,
302 }, {
303 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
304 | USB_DEVICE_ID_MATCH_DEVICE,
305 .idVendor = 0x04DD,
306 .idProduct = 0x8007, /* C-700 */
307 ZAURUS_MASTER_INTERFACE,
308 .driver_info = ZAURUS_PXA_INFO,
309 }, {
310 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
311 | USB_DEVICE_ID_MATCH_DEVICE,
312 .idVendor = 0x04DD,
313 .idProduct = 0x9031, /* C-750 C-760 */
314 ZAURUS_MASTER_INTERFACE,
315 .driver_info = ZAURUS_PXA_INFO,
316 }, {
317 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
318 | USB_DEVICE_ID_MATCH_DEVICE,
319 .idVendor = 0x04DD,
320 .idProduct = 0x9032, /* SL-6000 */
321 ZAURUS_MASTER_INTERFACE,
322 .driver_info = ZAURUS_PXA_INFO,
323 }, {
324 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
325 | USB_DEVICE_ID_MATCH_DEVICE,
326 .idVendor = 0x04DD,
327 /* reported with some C860 units */
328 .idProduct = 0x9050, /* C-860 */
329 ZAURUS_MASTER_INTERFACE,
330 .driver_info = ZAURUS_PXA_INFO,
334 /* At least some of the newest PXA units have very different lies about
335 * their standards support: they claim to be cell phones offering
336 * direct access to their radios! (No, they don't conform to CDC MDLM.)
339 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
340 USB_CDC_PROTO_NONE),
341 .driver_info = (unsigned long) &bogus_mdlm_info,
344 /* Olympus has some models with a Zaurus-compatible option.
345 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
348 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
349 | USB_DEVICE_ID_MATCH_DEVICE,
350 .idVendor = 0x07B4,
351 .idProduct = 0x0F02, /* R-1000 */
352 ZAURUS_MASTER_INTERFACE,
353 .driver_info = OLYMPUS_MXL_INFO,
355 { }, // END
357 MODULE_DEVICE_TABLE(usb, products);
359 static struct usb_driver zaurus_driver = {
360 .name = "zaurus",
361 .id_table = products,
362 .probe = usbnet_probe,
363 .disconnect = usbnet_disconnect,
364 .suspend = usbnet_suspend,
365 .resume = usbnet_resume,
368 static int __init zaurus_init(void)
370 return usb_register(&zaurus_driver);
372 module_init(zaurus_init);
374 static void __exit zaurus_exit(void)
376 usb_deregister(&zaurus_driver);
378 module_exit(zaurus_exit);
380 MODULE_AUTHOR("Pavel Machek, David Brownell");
381 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
382 MODULE_LICENSE("GPL");