?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[SCSI] lpfc 8.1.12 : Collapse discovery lists to a single node list
[linux-2.6/verdex.git] / drivers / scsi / sym53c416.c
blob2ca950582bc336ca0edd1817f702a9feb69efb6c
1 /*
2 * sym53c416.c
3 * Low-level SCSI driver for sym53c416 chip.
4 * Copyright (C) 1998 Lieven Willems (lw_linux@hotmail.com)
5 *
6 * Changes :
7 *
8 * Marcelo Tosatti <marcelo@conectiva.com.br> : Added io_request_lock locking
9 * Alan Cox <alan@redhat.com> : Cleaned up code formatting
10 * Fixed an irq locking bug
11 * Added ISAPnP support
12 * Bjoern A. Zeeb <bzeeb@zabbadoz.net> : Initial irq locking updates
13 * Added another card with ISAPnP support
14 *
15 * LILO command line usage: sym53c416=<PORTBASE>[,<IRQ>]
16 *
17 * This program is free software; you can redistribute it and/or modify it
18 * under the terms of the GNU General Public License as published by the
19 * Free Software Foundation; either version 2, or (at your option) any
20 * later version.
21 *
22 * This program is distributed in the hope that it will be useful, but
23 * WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
25 * General Public License for more details.
26 *
27 */
28
29 #include <linux/module.h>
30 #include <linux/kernel.h>
31 #include <linux/types.h>
32 #include <linux/init.h>
33 #include <linux/string.h>
34 #include <linux/ioport.h>
35 #include <linux/interrupt.h>
36 #include <linux/delay.h>
37 #include <linux/proc_fs.h>
38 #include <linux/spinlock.h>
39 #include <asm/dma.h>
40 #include <asm/system.h>
41 #include <asm/io.h>
42 #include <linux/blkdev.h>
43 #include <linux/isapnp.h>
44 #include "scsi.h"
45 #include <scsi/scsi_host.h>
46 #include "sym53c416.h"
47
48 #define VERSION_STRING "Version 1.0.0-ac"
49
50 #define TC_LOW 0x00 /* Transfer counter low */
51 #define TC_MID 0x01 /* Transfer counter mid */
52 #define SCSI_FIFO 0x02 /* SCSI FIFO register */
53 #define COMMAND_REG 0x03 /* Command Register */
54 #define STATUS_REG 0x04 /* Status Register (READ) */
55 #define DEST_BUS_ID 0x04 /* Destination Bus ID (WRITE) */
56 #define INT_REG 0x05 /* Interrupt Register (READ) */
57 #define TOM 0x05 /* Time out multiplier (WRITE) */
58 #define STP 0x06 /* Synchronous Transfer period */
59 #define SYNC_OFFSET 0x07 /* Synchronous Offset */
60 #define CONF_REG_1 0x08 /* Configuration register 1 */
61 #define CONF_REG_2 0x0B /* Configuration register 2 */
62 #define CONF_REG_3 0x0C /* Configuration register 3 */
63 #define CONF_REG_4 0x0D /* Configuration register 4 */
64 #define TC_HIGH 0x0E /* Transfer counter high */
65 #define PIO_FIFO_1 0x10 /* PIO FIFO register 1 */
66 #define PIO_FIFO_2 0x11 /* PIO FIFO register 2 */
67 #define PIO_FIFO_3 0x12 /* PIO FIFO register 3 */
68 #define PIO_FIFO_4 0x13 /* PIO FIFO register 4 */
69 #define PIO_FIFO_CNT 0x14 /* PIO FIFO count */
70 #define PIO_INT_REG 0x15 /* PIO interrupt register */
71 #define CONF_REG_5 0x16 /* Configuration register 5 */
72 #define FEATURE_EN 0x1D /* Feature Enable register */
73
74 /* Configuration register 1 entries: */
75 /* Bits 2-0: SCSI ID of host adapter */
76 #define SCM 0x80 /* Slow Cable Mode */
77 #define SRID 0x40 /* SCSI Reset Interrupt Disable */
78 #define PTM 0x20 /* Parity Test Mode */
79 #define EPC 0x10 /* Enable Parity Checking */
80 #define CTME 0x08 /* Special Test Mode */
81
82 /* Configuration register 2 entries: */
83 #define FE 0x40 /* Features Enable */
84 #define SCSI2 0x08 /* SCSI 2 Enable */
85 #define TBPA 0x04 /* Target Bad Parity Abort */
86
87 /* Configuration register 3 entries: */
88 #define IDMRC 0x80 /* ID Message Reserved Check */
89 #define QTE 0x40 /* Queue Tag Enable */
90 #define CDB10 0x20 /* Command Descriptor Block 10 */
91 #define FSCSI 0x10 /* FastSCSI */
92 #define FCLK 0x08 /* FastClock */
93
94 /* Configuration register 4 entries: */
95 #define RBS 0x08 /* Register bank select */
96 #define EAN 0x04 /* Enable Active Negotiation */
97
98 /* Configuration register 5 entries: */
99 #define LPSR 0x80 /* Lower Power SCSI Reset */
100 #define IE 0x20 /* Interrupt Enable */
101 #define LPM 0x02 /* Low Power Mode */
102 #define WSE0 0x01 /* 0WS Enable */
103
104 /* Interrupt register entries: */
105 #define SRST 0x80 /* SCSI Reset */
106 #define ILCMD 0x40 /* Illegal Command */
107 #define DIS 0x20 /* Disconnect */
108 #define BS 0x10 /* Bus Service */
109 #define FC 0x08 /* Function Complete */
110 #define RESEL 0x04 /* Reselected */
111 #define SI 0x03 /* Selection Interrupt */
112
113 /* Status Register Entries: */
114 #define SCI 0x80 /* SCSI Core Int */
115 #define GE 0x40 /* Gross Error */
116 #define PE 0x20 /* Parity Error */
117 #define TC 0x10 /* Terminal Count */
118 #define VGC 0x08 /* Valid Group Code */
119 #define PHBITS 0x07 /* Phase bits */
120
121 /* PIO Interrupt Register Entries: */
122 #define SCI 0x80 /* SCSI Core Int */
123 #define PFI 0x40 /* PIO FIFO Interrupt */
124 #define FULL 0x20 /* PIO FIFO Full */
125 #define EMPTY 0x10 /* PIO FIFO Empty */
126 #define CE 0x08 /* Collision Error */
127 #define OUE 0x04 /* Overflow / Underflow error */
128 #define FIE 0x02 /* Full Interrupt Enable */
129 #define EIE 0x01 /* Empty Interrupt Enable */
130
131 /* SYM53C416 SCSI phases (lower 3 bits of SYM53C416_STATUS_REG) */
132 #define PHASE_DATA_OUT 0x00
133 #define PHASE_DATA_IN 0x01
134 #define PHASE_COMMAND 0x02
135 #define PHASE_STATUS 0x03
136 #define PHASE_RESERVED_1 0x04
137 #define PHASE_RESERVED_2 0x05
138 #define PHASE_MESSAGE_OUT 0x06
139 #define PHASE_MESSAGE_IN 0x07
140
141 /* SYM53C416 core commands */
142 #define NOOP 0x00
143 #define FLUSH_FIFO 0x01
144 #define RESET_CHIP 0x02
145 #define RESET_SCSI_BUS 0x03
146 #define DISABLE_SEL_RESEL 0x45
147 #define RESEL_SEQ 0x40
148 #define SEL_WITHOUT_ATN_SEQ 0x41
149 #define SEL_WITH_ATN_SEQ 0x42
150 #define SEL_WITH_ATN_AND_STOP_SEQ 0x43
151 #define ENABLE_SEL_RESEL 0x44
152 #define SEL_WITH_ATN3_SEQ 0x46
153 #define RESEL3_SEQ 0x47
154 #define SND_MSG 0x20
155 #define SND_STAT 0x21
156 #define SND_DATA 0x22
157 #define DISCONNECT_SEQ 0x23
158 #define TERMINATE_SEQ 0x24
159 #define TARGET_COMM_COMPLETE_SEQ 0x25
160 #define DISCONN 0x27
161 #define RECV_MSG_SEQ 0x28
162 #define RECV_CMD 0x29
163 #define RECV_DATA 0x2A
164 #define RECV_CMD_SEQ 0x2B
165 #define TARGET_ABORT_PIO 0x04
166 #define TRANSFER_INFORMATION 0x10
167 #define INIT_COMM_COMPLETE_SEQ 0x11
168 #define MSG_ACCEPTED 0x12
169 #define TRANSFER_PAD 0x18
170 #define SET_ATN 0x1A
171 #define RESET_ATN 0x1B
172 #define ILLEGAL 0xFF
173
174 #define PIO_MODE 0x80
175
176 #define IO_RANGE 0x20 /* 0x00 - 0x1F */
177 #define ID "sym53c416" /* Attention: copied to the sym53c416.h */
178 #define PIO_SIZE 128 /* Size of PIO fifo is 128 bytes */
179
180 #define READ_TIMEOUT 150
181 #define WRITE_TIMEOUT 150
182
183 #ifdef MODULE
184
185 #define sym53c416_base sym53c416
186 #define sym53c416_base_1 sym53c416_1
187 #define sym53c416_base_2 sym53c416_2
188 #define sym53c416_base_3 sym53c416_3
189
190 static unsigned int sym53c416_base[2] = {0,0};
191 static unsigned int sym53c416_base_1[2] = {0,0};
192 static unsigned int sym53c416_base_2[2] = {0,0};
193 static unsigned int sym53c416_base_3[2] = {0,0};
194
195 #endif
196
197 #define MAXHOSTS 4
198
199 #define SG_ADDRESS(buffer) ((char *) (page_address((buffer)->page)+(buffer)->offset))
200
201 enum phases
202 {
203 idle,
204 data_out,
205 data_in,
206 command_ph,
207 status_ph,
208 message_out,
209 message_in
210 };
211
212 typedef struct
213 {
214 int base;
215 int irq;
216 int scsi_id;
217 } host;
218
219 static host hosts[MAXHOSTS] = {
220 {0, 0, SYM53C416_SCSI_ID},
221 {0, 0, SYM53C416_SCSI_ID},
222 {0, 0, SYM53C416_SCSI_ID},
223 {0, 0, SYM53C416_SCSI_ID}
224 };
225
226 static int host_index = 0;
227 static char info[120];
228 static Scsi_Cmnd *current_command = NULL;
229 static int fastpio = 1;
230
231 static int probeaddrs[] = {0x200, 0x220, 0x240, 0};
232
233 static void sym53c416_set_transfer_counter(int base, unsigned int len)
234 {
235 /* Program Transfer Counter */
236 outb(len & 0x0000FF, base + TC_LOW);
237 outb((len & 0x00FF00) >> 8, base + TC_MID);
238 outb((len & 0xFF0000) >> 16, base + TC_HIGH);
239 }
240
241 static DEFINE_SPINLOCK(sym53c416_lock);
242
243 /* Returns the number of bytes read */
244 static __inline__ unsigned int sym53c416_read(int base, unsigned char *buffer, unsigned int len)
245 {
246 unsigned int orig_len = len;
247 unsigned long flags = 0;
248 unsigned int bytes_left;
249 unsigned long i;
250 int timeout = READ_TIMEOUT;
251
252 /* Do transfer */
253 spin_lock_irqsave(&sym53c416_lock, flags);
254 while(len && timeout)
255 {
256 bytes_left = inb(base + PIO_FIFO_CNT); /* Number of bytes in the PIO FIFO */
257 if(fastpio && bytes_left > 3)
258 {
259 insl(base + PIO_FIFO_1, buffer, bytes_left >> 2);
260 buffer += bytes_left & 0xFC;
261 len -= bytes_left & 0xFC;
262 }
263 else if(bytes_left > 0)
264 {
265 len -= bytes_left;
266 for(; bytes_left > 0; bytes_left--)
267 *(buffer++) = inb(base + PIO_FIFO_1);
268 }
269 else
270 {
271 i = jiffies + timeout;
272 spin_unlock_irqrestore(&sym53c416_lock, flags);
273 while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & EMPTY) && timeout)
274 if(inb(base + PIO_INT_REG) & SCI)
275 timeout = 0;
276 spin_lock_irqsave(&sym53c416_lock, flags);
277 if(inb(base + PIO_INT_REG) & EMPTY)
278 timeout = 0;
279 }
280 }
281 spin_unlock_irqrestore(&sym53c416_lock, flags);
282 return orig_len - len;
283 }
284
285 /* Returns the number of bytes written */
286 static __inline__ unsigned int sym53c416_write(int base, unsigned char *buffer, unsigned int len)
287 {
288 unsigned int orig_len = len;
289 unsigned long flags = 0;
290 unsigned int bufferfree;
291 unsigned long i;
292 unsigned int timeout = WRITE_TIMEOUT;
293
294 /* Do transfer */
295 spin_lock_irqsave(&sym53c416_lock, flags);
296 while(len && timeout)
297 {
298 bufferfree = PIO_SIZE - inb(base + PIO_FIFO_CNT);
299 if(bufferfree > len)
300 bufferfree = len;
301 if(fastpio && bufferfree > 3)
302 {
303 outsl(base + PIO_FIFO_1, buffer, bufferfree >> 2);
304 buffer += bufferfree & 0xFC;
305 len -= bufferfree & 0xFC;
306 }
307 else if(bufferfree > 0)
308 {
309 len -= bufferfree;
310 for(; bufferfree > 0; bufferfree--)
311 outb(*(buffer++), base + PIO_FIFO_1);
312 }
313 else
314 {
315 i = jiffies + timeout;
316 spin_unlock_irqrestore(&sym53c416_lock, flags);
317 while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & FULL) && timeout)
318 ;
319 spin_lock_irqsave(&sym53c416_lock, flags);
320 if(inb(base + PIO_INT_REG) & FULL)
321 timeout = 0;
322 }
323 }
324 spin_unlock_irqrestore(&sym53c416_lock, flags);
325 return orig_len - len;
326 }
327
328 static irqreturn_t sym53c416_intr_handle(int irq, void *dev_id)
329 {
330 struct Scsi_Host *dev = dev_id;
331 int base = 0;
332 int i;
333 unsigned long flags = 0;
334 unsigned char status_reg, pio_int_reg, int_reg;
335 struct scatterlist *sglist;
336 unsigned int sgcount;
337 unsigned int tot_trans = 0;
338
339 /* We search the base address of the host adapter which caused the interrupt */
340 /* FIXME: should pass dev_id sensibly as hosts[i] */
341 for(i = 0; i < host_index && !base; i++)
342 if(irq == hosts[i].irq)
343 base = hosts[i].base;
344 /* If no adapter found, we cannot handle the interrupt. Leave a message */
345 /* and continue. This should never happen... */
346 if(!base)
347 {
348 printk(KERN_ERR "sym53c416: No host adapter defined for interrupt %d\n", irq);
349 return IRQ_NONE;
350 }
351 /* Now we have the base address and we can start handling the interrupt */
352
353 spin_lock_irqsave(dev->host_lock,flags);
354 status_reg = inb(base + STATUS_REG);
355 pio_int_reg = inb(base + PIO_INT_REG);
356 int_reg = inb(base + INT_REG);
357 spin_unlock_irqrestore(dev->host_lock, flags);
358
359 /* First, we handle error conditions */
360 if(int_reg & SCI) /* SCSI Reset */
361 {
362 printk(KERN_DEBUG "sym53c416: Reset received\n");
363 current_command->SCp.phase = idle;
364 current_command->result = DID_RESET << 16;
365 spin_lock_irqsave(dev->host_lock, flags);
366 current_command->scsi_done(current_command);
367 spin_unlock_irqrestore(dev->host_lock, flags);
368 goto out;
369 }
370 if(int_reg & ILCMD) /* Illegal Command */
371 {
372 printk(KERN_WARNING "sym53c416: Illegal Command: 0x%02x.\n", inb(base + COMMAND_REG));
373 current_command->SCp.phase = idle;
374 current_command->result = DID_ERROR << 16;
375 spin_lock_irqsave(dev->host_lock, flags);
376 current_command->scsi_done(current_command);
377 spin_unlock_irqrestore(dev->host_lock, flags);
378 goto out;
379 }
380 if(status_reg & GE) /* Gross Error */
381 {
382 printk(KERN_WARNING "sym53c416: Controller reports gross error.\n");
383 current_command->SCp.phase = idle;
384 current_command->result = DID_ERROR << 16;
385 spin_lock_irqsave(dev->host_lock, flags);
386 current_command->scsi_done(current_command);
387 spin_unlock_irqrestore(dev->host_lock, flags);
388 goto out;
389 }
390 if(status_reg & PE) /* Parity Error */
391 {
392 printk(KERN_WARNING "sym53c416:SCSI parity error.\n");
393 current_command->SCp.phase = idle;
394 current_command->result = DID_PARITY << 16;
395 spin_lock_irqsave(dev->host_lock, flags);
396 current_command->scsi_done(current_command);
397 spin_unlock_irqrestore(dev->host_lock, flags);
398 goto out;
399 }
400 if(pio_int_reg & (CE | OUE))
401 {
402 printk(KERN_WARNING "sym53c416: PIO interrupt error.\n");
403 current_command->SCp.phase = idle;
404 current_command->result = DID_ERROR << 16;
405 spin_lock_irqsave(dev->host_lock, flags);
406 current_command->scsi_done(current_command);
407 spin_unlock_irqrestore(dev->host_lock, flags);
408 goto out;
409 }
410 if(int_reg & DIS) /* Disconnect */
411 {
412 if(current_command->SCp.phase != message_in)
413 current_command->result = DID_NO_CONNECT << 16;
414 else
415 current_command->result = (current_command->SCp.Status & 0xFF) | ((current_command->SCp.Message & 0xFF) << 8) | (DID_OK << 16);
416 current_command->SCp.phase = idle;
417 spin_lock_irqsave(dev->host_lock, flags);
418 current_command->scsi_done(current_command);
419 spin_unlock_irqrestore(dev->host_lock, flags);
420 goto out;
421 }
422 /* Now we handle SCSI phases */
423
424 switch(status_reg & PHBITS) /* Filter SCSI phase out of status reg */
425 {
426 case PHASE_DATA_OUT:
427 {
428 if(int_reg & BS)
429 {
430 current_command->SCp.phase = data_out;
431 outb(FLUSH_FIFO, base + COMMAND_REG);
432 sym53c416_set_transfer_counter(base, current_command->request_bufflen);
433 outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG);
434 if(!current_command->use_sg)
435 tot_trans = sym53c416_write(base, current_command->request_buffer, current_command->request_bufflen);
436 else
437 {
438 sgcount = current_command->use_sg;
439 sglist = current_command->request_buffer;
440 while(sgcount--)
441 {
442 tot_trans += sym53c416_write(base, SG_ADDRESS(sglist), sglist->length);
443 sglist++;
444 }
445 }
446 if(tot_trans < current_command->underflow)
447 printk(KERN_WARNING "sym53c416: Underflow, wrote %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow);
448 }
449 break;
450 }
451
452 case PHASE_DATA_IN:
453 {
454 if(int_reg & BS)
455 {
456 current_command->SCp.phase = data_in;
457 outb(FLUSH_FIFO, base + COMMAND_REG);
458 sym53c416_set_transfer_counter(base, current_command->request_bufflen);
459 outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG);
460 if(!current_command->use_sg)
461 tot_trans = sym53c416_read(base, current_command->request_buffer, current_command->request_bufflen);
462 else
463 {
464 sgcount = current_command->use_sg;
465 sglist = current_command->request_buffer;
466 while(sgcount--)
467 {
468 tot_trans += sym53c416_read(base, SG_ADDRESS(sglist), sglist->length);
469 sglist++;
470 }
471 }
472 if(tot_trans < current_command->underflow)
473 printk(KERN_WARNING "sym53c416: Underflow, read %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow);
474 }
475 break;
476 }
477
478 case PHASE_COMMAND:
479 {
480 current_command->SCp.phase = command_ph;
481 printk(KERN_ERR "sym53c416: Unknown interrupt in command phase.\n");
482 break;
483 }
484
485 case PHASE_STATUS:
486 {
487 current_command->SCp.phase = status_ph;
488 outb(FLUSH_FIFO, base + COMMAND_REG);
489 outb(INIT_COMM_COMPLETE_SEQ, base + COMMAND_REG);
490 break;
491 }
492
493 case PHASE_RESERVED_1:
494 case PHASE_RESERVED_2:
495 {
496 printk(KERN_ERR "sym53c416: Reserved phase occurred.\n");
497 break;
498 }
499
500 case PHASE_MESSAGE_OUT:
501 {
502 current_command->SCp.phase = message_out;
503 outb(SET_ATN, base + COMMAND_REG);
504 outb(MSG_ACCEPTED, base + COMMAND_REG);
505 break;
506 }
507
508 case PHASE_MESSAGE_IN:
509 {
510 current_command->SCp.phase = message_in;
511 current_command->SCp.Status = inb(base + SCSI_FIFO);
512 current_command->SCp.Message = inb(base + SCSI_FIFO);
513 if(current_command->SCp.Message == SAVE_POINTERS || current_command->SCp.Message == DISCONNECT)
514 outb(SET_ATN, base + COMMAND_REG);
515 outb(MSG_ACCEPTED, base + COMMAND_REG);
516 break;
517 }
518 }
519 out:
520 return IRQ_HANDLED;
521 }
522
523 static void sym53c416_init(int base, int scsi_id)
524 {
525 outb(RESET_CHIP, base + COMMAND_REG);
526 outb(NOOP, base + COMMAND_REG);
527 outb(0x99, base + TOM); /* Time out of 250 ms */
528 outb(0x05, base + STP);
529 outb(0x00, base + SYNC_OFFSET);
530 outb(EPC | scsi_id, base + CONF_REG_1);
531 outb(FE | SCSI2 | TBPA, base + CONF_REG_2);
532 outb(IDMRC | QTE | CDB10 | FSCSI | FCLK, base + CONF_REG_3);
533 outb(0x83 | EAN, base + CONF_REG_4);
534 outb(IE | WSE0, base + CONF_REG_5);
535 outb(0, base + FEATURE_EN);
536 }
537
538 static int sym53c416_probeirq(int base, int scsi_id)
539 {
540 int irq, irqs;
541 unsigned long i;
542
543 /* Clear interrupt register */
544 inb(base + INT_REG);
545 /* Start probing for irq's */
546 irqs = probe_irq_on();
547 /* Reinit chip */
548 sym53c416_init(base, scsi_id);
549 /* Cause interrupt */
550 outb(NOOP, base + COMMAND_REG);
551 outb(ILLEGAL, base + COMMAND_REG);
552 outb(0x07, base + DEST_BUS_ID);
553 outb(0x00, base + DEST_BUS_ID);
554 /* Wait for interrupt to occur */
555 i = jiffies + 20;
556 while(time_before(jiffies, i) && !(inb(base + STATUS_REG) & SCI))
557 barrier();
558 if(time_before_eq(i, jiffies)) /* timed out */
559 return 0;
560 /* Get occurred irq */
561 irq = probe_irq_off(irqs);
562 sym53c416_init(base, scsi_id);
563 return irq;
564 }
565
566 /* Setup: sym53c416=base,irq */
567 void sym53c416_setup(char *str, int *ints)
568 {
569 int i;
570
571 if(host_index >= MAXHOSTS)
572 {
573 printk(KERN_WARNING "sym53c416: Too many hosts defined\n");
574 return;
575 }
576 if(ints[0] < 1 || ints[0] > 2)
577 {
578 printk(KERN_ERR "sym53c416: Wrong number of parameters:\n");
579 printk(KERN_ERR "sym53c416: usage: sym53c416=<base>[,<irq>]\n");
580 return;
581 }
582 for(i = 0; i < host_index && i >= 0; i++)
583 if(hosts[i].base == ints[1])
584 i = -2;
585 if(i >= 0)
586 {
587 hosts[host_index].base = ints[1];
588 hosts[host_index].irq = (ints[0] == 2)? ints[2] : 0;
589 host_index++;
590 }
591 }
592
593 static int sym53c416_test(int base)
594 {
595 outb(RESET_CHIP, base + COMMAND_REG);
596 outb(NOOP, base + COMMAND_REG);
597 if(inb(base + COMMAND_REG) != NOOP)
598 return 0;
599 if(!inb(base + TC_HIGH) || inb(base + TC_HIGH) == 0xFF)
600 return 0;
601 if((inb(base + PIO_INT_REG) & (FULL | EMPTY | CE | OUE | FIE | EIE)) != EMPTY)
602 return 0;
603 return 1;
604 }
605
606
607 static struct isapnp_device_id id_table[] __devinitdata = {
608 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
609 ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4161), 0 },
610 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
611 ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4163), 0 },
612 { ISAPNP_DEVICE_SINGLE_END }
613 };
614
615 MODULE_DEVICE_TABLE(isapnp, id_table);
616
617 static void sym53c416_probe(void)
618 {
619 int *base = probeaddrs;
620 int ints[2];
621
622 ints[0] = 1;
623 for(; *base; base++) {
624 if (request_region(*base, IO_RANGE, ID)) {
625 if (sym53c416_test(*base)) {
626 ints[1] = *base;
627 sym53c416_setup(NULL, ints);
628 }
629 release_region(*base, IO_RANGE);
630 }
631 }
632 }
633
634 int __init sym53c416_detect(struct scsi_host_template *tpnt)
635 {
636 unsigned long flags;
637 struct Scsi_Host * shpnt = NULL;
638 int i;
639 int count;
640 struct pnp_dev *idev = NULL;
641
642 #ifdef MODULE
643 int ints[3];
644
645 ints[0] = 2;
646 if(sym53c416_base)
647 {
648 ints[1] = sym53c416_base[0];
649 ints[2] = sym53c416_base[1];
650 sym53c416_setup(NULL, ints);
651 }
652 if(sym53c416_base_1)
653 {
654 ints[1] = sym53c416_base_1[0];
655 ints[2] = sym53c416_base_1[1];
656 sym53c416_setup(NULL, ints);
657 }
658 if(sym53c416_base_2)
659 {
660 ints[1] = sym53c416_base_2[0];
661 ints[2] = sym53c416_base_2[1];
662 sym53c416_setup(NULL, ints);
663 }
664 if(sym53c416_base_3)
665 {
666 ints[1] = sym53c416_base_3[0];
667 ints[2] = sym53c416_base_3[1];
668 sym53c416_setup(NULL, ints);
669 }
670 #endif
671 printk(KERN_INFO "sym53c416.c: %s\n", VERSION_STRING);
672
673 for (i=0; id_table[i].vendor != 0; i++) {
674 while((idev=pnp_find_dev(NULL, id_table[i].vendor,
675 id_table[i].function, idev))!=NULL)
676 {
677 int i[3];
678
679 if(pnp_device_attach(idev)<0)
680 {
681 printk(KERN_WARNING "sym53c416: unable to attach PnP device.\n");
682 continue;
683 }
684 if(pnp_activate_dev(idev) < 0)
685 {
686 printk(KERN_WARNING "sym53c416: unable to activate PnP device.\n");
687 pnp_device_detach(idev);
688 continue;
689
690 }
691
692 i[0] = 2;
693 i[1] = pnp_port_start(idev, 0);
694 i[2] = pnp_irq(idev, 0);
695
696 printk(KERN_INFO "sym53c416: ISAPnP card found and configured at 0x%X, IRQ %d.\n",
697 i[1], i[2]);
698 sym53c416_setup(NULL, i);
699 }
700 }
701 sym53c416_probe();
702
703 /* Now we register and set up each host adapter found... */
704 for(count = 0, i = 0; i < host_index; i++) {
705 if (!request_region(hosts[i].base, IO_RANGE, ID))
706 continue;
707 if (!sym53c416_test(hosts[i].base)) {
708 printk(KERN_WARNING "No sym53c416 found at address 0x%03x\n", hosts[i].base);
709 goto fail_release_region;
710 }
711
712 /* We don't have an irq yet, so we should probe for one */
713 if (!hosts[i].irq)
714 hosts[i].irq = sym53c416_probeirq(hosts[i].base, hosts[i].scsi_id);
715 if (!hosts[i].irq)
716 goto fail_release_region;
717
718 shpnt = scsi_register(tpnt, 0);
719 if (!shpnt)
720 goto fail_release_region;
721 /* Request for specified IRQ */
722 if (request_irq(hosts[i].irq, sym53c416_intr_handle, 0, ID, shpnt))
723 goto fail_free_host;
724
725 spin_lock_irqsave(&sym53c416_lock, flags);
726 shpnt->unique_id = hosts[i].base;
727 shpnt->io_port = hosts[i].base;
728 shpnt->n_io_port = IO_RANGE;
729 shpnt->irq = hosts[i].irq;
730 shpnt->this_id = hosts[i].scsi_id;
731 sym53c416_init(hosts[i].base, hosts[i].scsi_id);
732 count++;
733 spin_unlock_irqrestore(&sym53c416_lock, flags);
734 continue;
735
736 fail_free_host:
737 scsi_unregister(shpnt);
738 fail_release_region:
739 release_region(hosts[i].base, IO_RANGE);
740 }
741 return count;
742 }
743
744 const char *sym53c416_info(struct Scsi_Host *SChost)
745 {
746 int i;
747 int base = SChost->io_port;
748 int irq = SChost->irq;
749 int scsi_id = 0;
750 int rev = inb(base + TC_HIGH);
751
752 for(i = 0; i < host_index; i++)
753 if(hosts[i].base == base)
754 scsi_id = hosts[i].scsi_id;
755 sprintf(info, "Symbios Logic 53c416 (rev. %d) at 0x%03x, irq %d, SCSI-ID %d, %s pio", rev, base, irq, scsi_id, (fastpio)? "fast" : "slow");
756 return info;
757 }
758
759 int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
760 {
761 int base;
762 unsigned long flags = 0;
763 int i;
764
765 /* Store base register as we can have more than one controller in the system */
766 base = SCpnt->device->host->io_port;
767 current_command = SCpnt; /* set current command */
768 current_command->scsi_done = done; /* set ptr to done function */
769 current_command->SCp.phase = command_ph; /* currect phase is the command phase */
770 current_command->SCp.Status = 0;
771 current_command->SCp.Message = 0;
772
773 spin_lock_irqsave(&sym53c416_lock, flags);
774 outb(scmd_id(SCpnt), base + DEST_BUS_ID); /* Set scsi id target */
775 outb(FLUSH_FIFO, base + COMMAND_REG); /* Flush SCSI and PIO FIFO's */
776 /* Write SCSI command into the SCSI fifo */
777 for(i = 0; i < SCpnt->cmd_len; i++)
778 outb(SCpnt->cmnd[i], base + SCSI_FIFO);
779 /* Start selection sequence */
780 outb(SEL_WITHOUT_ATN_SEQ, base + COMMAND_REG);
781 /* Now an interrupt will be generated which we will catch in out interrupt routine */
782 spin_unlock_irqrestore(&sym53c416_lock, flags);
783 return 0;
784 }
785
786 static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
787 {
788 int base;
789 int scsi_id = -1;
790 int i;
791 unsigned long flags;
792
793 spin_lock_irqsave(&sym53c416_lock, flags);
794
795 /* printk("sym53c416_reset\n"); */
796 base = SCpnt->device->host->io_port;
797 /* search scsi_id - fixme, we shouldnt need to iterate for this! */
798 for(i = 0; i < host_index && scsi_id == -1; i++)
799 if(hosts[i].base == base)
800 scsi_id = hosts[i].scsi_id;
801 outb(RESET_CHIP, base + COMMAND_REG);
802 outb(NOOP | PIO_MODE, base + COMMAND_REG);
803 outb(RESET_SCSI_BUS, base + COMMAND_REG);
804 sym53c416_init(base, scsi_id);
805
806 spin_unlock_irqrestore(&sym53c416_lock, flags);
807 return SUCCESS;
808 }
809
810 static int sym53c416_release(struct Scsi_Host *shost)
811 {
812 if (shost->irq)
813 free_irq(shost->irq, shost);
814 if (shost->io_port && shost->n_io_port)
815 release_region(shost->io_port, shost->n_io_port);
816 return 0;
817 }
818
819 static int sym53c416_bios_param(struct scsi_device *sdev,
820 struct block_device *dev,
821 sector_t capacity, int *ip)
822 {
823 int size;
824
825 size = capacity;
826 ip[0] = 64; /* heads */
827 ip[1] = 32; /* sectors */
828 if((ip[2] = size >> 11) > 1024) /* cylinders, test for big disk */
829 {
830 ip[0] = 255; /* heads */
831 ip[1] = 63; /* sectors */
832 ip[2] = size / (255 * 63); /* cylinders */
833 }
834 return 0;
835 }
836
837 /* Loadable module support */
838 #ifdef MODULE
839
840 MODULE_AUTHOR("Lieven Willems");
841 MODULE_LICENSE("GPL");
842
843 module_param_array(sym53c416, uint, NULL, 0);
844 module_param_array(sym53c416_1, uint, NULL, 0);
845 module_param_array(sym53c416_2, uint, NULL, 0);
846 module_param_array(sym53c416_3, uint, NULL, 0);
847
848 #endif
849
850 static struct scsi_host_template driver_template = {
851 .proc_name = "sym53c416",
852 .name = "Symbios Logic 53c416",
853 .detect = sym53c416_detect,
854 .info = sym53c416_info,
855 .queuecommand = sym53c416_queuecommand,
856 .eh_host_reset_handler =sym53c416_host_reset,
857 .release = sym53c416_release,
858 .bios_param = sym53c416_bios_param,
859 .can_queue = 1,
860 .this_id = SYM53C416_SCSI_ID,
861 .sg_tablesize = 32,
862 .cmd_per_lun = 1,
863 .unchecked_isa_dma = 1,
864 .use_clustering = ENABLE_CLUSTERING,
865 };
866 #include "scsi_module.c"
Verdex Pro support