Input: rename input.ko into input-core.ko
[linux-2.6/verdex.git] / drivers / char / synclink_gt.c
blobe829594195c1d836c6dca220c74e47939a5f45ec
1 /*
2 * $Id: synclink_gt.c,v 4.25 2006/02/06 21:20:33 paulkf Exp $
4 * Device driver for Microgate SyncLink GT serial adapters.
6 * written by Paul Fulghum for Microgate Corporation
7 * paulkf@microgate.com
9 * Microgate and SyncLink are trademarks of Microgate Corporation
11 * This code is released under the GNU General Public License (GPL)
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
16 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
17 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
18 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
19 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
21 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
22 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
23 * OF THE POSSIBILITY OF SUCH DAMAGE.
27 * DEBUG OUTPUT DEFINITIONS
29 * uncomment lines below to enable specific types of debug output
31 * DBGINFO information - most verbose output
32 * DBGERR serious errors
33 * DBGBH bottom half service routine debugging
34 * DBGISR interrupt service routine debugging
35 * DBGDATA output receive and transmit data
36 * DBGTBUF output transmit DMA buffers and registers
37 * DBGRBUF output receive DMA buffers and registers
40 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
41 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
42 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
43 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
44 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
45 //#define DBGTBUF(info) dump_tbufs(info)
46 //#define DBGRBUF(info) dump_rbufs(info)
49 #include <linux/module.h>
50 #include <linux/version.h>
51 #include <linux/errno.h>
52 #include <linux/signal.h>
53 #include <linux/sched.h>
54 #include <linux/timer.h>
55 #include <linux/interrupt.h>
56 #include <linux/pci.h>
57 #include <linux/tty.h>
58 #include <linux/tty_flip.h>
59 #include <linux/serial.h>
60 #include <linux/major.h>
61 #include <linux/string.h>
62 #include <linux/fcntl.h>
63 #include <linux/ptrace.h>
64 #include <linux/ioport.h>
65 #include <linux/mm.h>
66 #include <linux/slab.h>
67 #include <linux/netdevice.h>
68 #include <linux/vmalloc.h>
69 #include <linux/init.h>
70 #include <linux/delay.h>
71 #include <linux/ioctl.h>
72 #include <linux/termios.h>
73 #include <linux/bitops.h>
74 #include <linux/workqueue.h>
75 #include <linux/hdlc.h>
77 #include <asm/system.h>
78 #include <asm/io.h>
79 #include <asm/irq.h>
80 #include <asm/dma.h>
81 #include <asm/types.h>
82 #include <asm/uaccess.h>
84 #include "linux/synclink.h"
86 #ifdef CONFIG_HDLC_MODULE
87 #define CONFIG_HDLC 1
88 #endif
91 * module identification
93 static char *driver_name = "SyncLink GT";
94 static char *driver_version = "$Revision: 4.25 $";
95 static char *tty_driver_name = "synclink_gt";
96 static char *tty_dev_prefix = "ttySLG";
97 MODULE_LICENSE("GPL");
98 #define MGSL_MAGIC 0x5401
99 #define MAX_DEVICES 12
101 static struct pci_device_id pci_table[] = {
102 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
103 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
104 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
105 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
106 {0,}, /* terminate list */
108 MODULE_DEVICE_TABLE(pci, pci_table);
110 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
111 static void remove_one(struct pci_dev *dev);
112 static struct pci_driver pci_driver = {
113 .name = "synclink_gt",
114 .id_table = pci_table,
115 .probe = init_one,
116 .remove = __devexit_p(remove_one),
119 static int pci_registered;
122 * module configuration and status
124 static struct slgt_info *slgt_device_list;
125 static int slgt_device_count;
127 static int ttymajor;
128 static int debug_level;
129 static int maxframe[MAX_DEVICES];
130 static int dosyncppp[MAX_DEVICES];
132 module_param(ttymajor, int, 0);
133 module_param(debug_level, int, 0);
134 module_param_array(maxframe, int, NULL, 0);
135 module_param_array(dosyncppp, int, NULL, 0);
137 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
138 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
139 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
140 MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
143 * tty support and callbacks
145 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
147 static struct tty_driver *serial_driver;
149 static int open(struct tty_struct *tty, struct file * filp);
150 static void close(struct tty_struct *tty, struct file * filp);
151 static void hangup(struct tty_struct *tty);
152 static void set_termios(struct tty_struct *tty, struct termios *old_termios);
154 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
155 static void put_char(struct tty_struct *tty, unsigned char ch);
156 static void send_xchar(struct tty_struct *tty, char ch);
157 static void wait_until_sent(struct tty_struct *tty, int timeout);
158 static int write_room(struct tty_struct *tty);
159 static void flush_chars(struct tty_struct *tty);
160 static void flush_buffer(struct tty_struct *tty);
161 static void tx_hold(struct tty_struct *tty);
162 static void tx_release(struct tty_struct *tty);
164 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
165 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
166 static int chars_in_buffer(struct tty_struct *tty);
167 static void throttle(struct tty_struct * tty);
168 static void unthrottle(struct tty_struct * tty);
169 static void set_break(struct tty_struct *tty, int break_state);
172 * generic HDLC support and callbacks
174 #ifdef CONFIG_HDLC
175 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
176 static void hdlcdev_tx_done(struct slgt_info *info);
177 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
178 static int hdlcdev_init(struct slgt_info *info);
179 static void hdlcdev_exit(struct slgt_info *info);
180 #endif
184 * device specific structures, macros and functions
187 #define SLGT_MAX_PORTS 4
188 #define SLGT_REG_SIZE 256
191 * conditional wait facility
193 struct cond_wait {
194 struct cond_wait *next;
195 wait_queue_head_t q;
196 wait_queue_t wait;
197 unsigned int data;
199 static void init_cond_wait(struct cond_wait *w, unsigned int data);
200 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
201 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
202 static void flush_cond_wait(struct cond_wait **head);
205 * DMA buffer descriptor and access macros
207 struct slgt_desc
209 unsigned short count;
210 unsigned short status;
211 unsigned int pbuf; /* physical address of data buffer */
212 unsigned int next; /* physical address of next descriptor */
214 /* driver book keeping */
215 char *buf; /* virtual address of data buffer */
216 unsigned int pdesc; /* physical address of this descriptor */
217 dma_addr_t buf_dma_addr;
220 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
221 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
222 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
223 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
224 #define desc_count(a) (le16_to_cpu((a).count))
225 #define desc_status(a) (le16_to_cpu((a).status))
226 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
227 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
228 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
229 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
230 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
232 struct _input_signal_events {
233 int ri_up;
234 int ri_down;
235 int dsr_up;
236 int dsr_down;
237 int dcd_up;
238 int dcd_down;
239 int cts_up;
240 int cts_down;
244 * device instance data structure
246 struct slgt_info {
247 void *if_ptr; /* General purpose pointer (used by SPPP) */
249 struct slgt_info *next_device; /* device list link */
251 int magic;
252 int flags;
254 char device_name[25];
255 struct pci_dev *pdev;
257 int port_count; /* count of ports on adapter */
258 int adapter_num; /* adapter instance number */
259 int port_num; /* port instance number */
261 /* array of pointers to port contexts on this adapter */
262 struct slgt_info *port_array[SLGT_MAX_PORTS];
264 int count; /* count of opens */
265 int line; /* tty line instance number */
266 unsigned short close_delay;
267 unsigned short closing_wait; /* time to wait before closing */
269 struct mgsl_icount icount;
271 struct tty_struct *tty;
272 int timeout;
273 int x_char; /* xon/xoff character */
274 int blocked_open; /* # of blocked opens */
275 unsigned int read_status_mask;
276 unsigned int ignore_status_mask;
278 wait_queue_head_t open_wait;
279 wait_queue_head_t close_wait;
281 wait_queue_head_t status_event_wait_q;
282 wait_queue_head_t event_wait_q;
283 struct timer_list tx_timer;
284 struct timer_list rx_timer;
286 unsigned int gpio_present;
287 struct cond_wait *gpio_wait_q;
289 spinlock_t lock; /* spinlock for synchronizing with ISR */
291 struct work_struct task;
292 u32 pending_bh;
293 int bh_requested;
294 int bh_running;
296 int isr_overflow;
297 int irq_requested; /* nonzero if IRQ requested */
298 int irq_occurred; /* for diagnostics use */
300 /* device configuration */
302 unsigned int bus_type;
303 unsigned int irq_level;
304 unsigned long irq_flags;
306 unsigned char __iomem * reg_addr; /* memory mapped registers address */
307 u32 phys_reg_addr;
308 int reg_addr_requested;
310 MGSL_PARAMS params; /* communications parameters */
311 u32 idle_mode;
312 u32 max_frame_size; /* as set by device config */
314 unsigned int raw_rx_size;
315 unsigned int if_mode;
317 /* device status */
319 int rx_enabled;
320 int rx_restart;
322 int tx_enabled;
323 int tx_active;
325 unsigned char signals; /* serial signal states */
326 int init_error; /* initialization error */
328 unsigned char *tx_buf;
329 int tx_count;
331 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
332 char char_buf[MAX_ASYNC_BUFFER_SIZE];
333 BOOLEAN drop_rts_on_tx_done;
334 struct _input_signal_events input_signal_events;
336 int dcd_chkcount; /* check counts to prevent */
337 int cts_chkcount; /* too many IRQs if a signal */
338 int dsr_chkcount; /* is floating */
339 int ri_chkcount;
341 char *bufs; /* virtual address of DMA buffer lists */
342 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
344 unsigned int rbuf_count;
345 struct slgt_desc *rbufs;
346 unsigned int rbuf_current;
347 unsigned int rbuf_index;
349 unsigned int tbuf_count;
350 struct slgt_desc *tbufs;
351 unsigned int tbuf_current;
352 unsigned int tbuf_start;
354 unsigned char *tmp_rbuf;
355 unsigned int tmp_rbuf_count;
357 /* SPPP/Cisco HDLC device parts */
359 int netcount;
360 int dosyncppp;
361 spinlock_t netlock;
362 #ifdef CONFIG_HDLC
363 struct net_device *netdev;
364 #endif
368 static MGSL_PARAMS default_params = {
369 .mode = MGSL_MODE_HDLC,
370 .loopback = 0,
371 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
372 .encoding = HDLC_ENCODING_NRZI_SPACE,
373 .clock_speed = 0,
374 .addr_filter = 0xff,
375 .crc_type = HDLC_CRC_16_CCITT,
376 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
377 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
378 .data_rate = 9600,
379 .data_bits = 8,
380 .stop_bits = 1,
381 .parity = ASYNC_PARITY_NONE
385 #define BH_RECEIVE 1
386 #define BH_TRANSMIT 2
387 #define BH_STATUS 4
388 #define IO_PIN_SHUTDOWN_LIMIT 100
390 #define DMABUFSIZE 256
391 #define DESC_LIST_SIZE 4096
393 #define MASK_PARITY BIT1
394 #define MASK_FRAMING BIT2
395 #define MASK_BREAK BIT3
396 #define MASK_OVERRUN BIT4
398 #define GSR 0x00 /* global status */
399 #define JCR 0x04 /* JTAG control */
400 #define IODR 0x08 /* GPIO direction */
401 #define IOER 0x0c /* GPIO interrupt enable */
402 #define IOVR 0x10 /* GPIO value */
403 #define IOSR 0x14 /* GPIO interrupt status */
404 #define TDR 0x80 /* tx data */
405 #define RDR 0x80 /* rx data */
406 #define TCR 0x82 /* tx control */
407 #define TIR 0x84 /* tx idle */
408 #define TPR 0x85 /* tx preamble */
409 #define RCR 0x86 /* rx control */
410 #define VCR 0x88 /* V.24 control */
411 #define CCR 0x89 /* clock control */
412 #define BDR 0x8a /* baud divisor */
413 #define SCR 0x8c /* serial control */
414 #define SSR 0x8e /* serial status */
415 #define RDCSR 0x90 /* rx DMA control/status */
416 #define TDCSR 0x94 /* tx DMA control/status */
417 #define RDDAR 0x98 /* rx DMA descriptor address */
418 #define TDDAR 0x9c /* tx DMA descriptor address */
420 #define RXIDLE BIT14
421 #define RXBREAK BIT14
422 #define IRQ_TXDATA BIT13
423 #define IRQ_TXIDLE BIT12
424 #define IRQ_TXUNDER BIT11 /* HDLC */
425 #define IRQ_RXDATA BIT10
426 #define IRQ_RXIDLE BIT9 /* HDLC */
427 #define IRQ_RXBREAK BIT9 /* async */
428 #define IRQ_RXOVER BIT8
429 #define IRQ_DSR BIT7
430 #define IRQ_CTS BIT6
431 #define IRQ_DCD BIT5
432 #define IRQ_RI BIT4
433 #define IRQ_ALL 0x3ff0
434 #define IRQ_MASTER BIT0
436 #define slgt_irq_on(info, mask) \
437 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
438 #define slgt_irq_off(info, mask) \
439 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
441 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
442 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
443 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
444 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
445 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
446 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
448 static void msc_set_vcr(struct slgt_info *info);
450 static int startup(struct slgt_info *info);
451 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
452 static void shutdown(struct slgt_info *info);
453 static void program_hw(struct slgt_info *info);
454 static void change_params(struct slgt_info *info);
456 static int register_test(struct slgt_info *info);
457 static int irq_test(struct slgt_info *info);
458 static int loopback_test(struct slgt_info *info);
459 static int adapter_test(struct slgt_info *info);
461 static void reset_adapter(struct slgt_info *info);
462 static void reset_port(struct slgt_info *info);
463 static void async_mode(struct slgt_info *info);
464 static void hdlc_mode(struct slgt_info *info);
466 static void rx_stop(struct slgt_info *info);
467 static void rx_start(struct slgt_info *info);
468 static void reset_rbufs(struct slgt_info *info);
469 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
470 static void rdma_reset(struct slgt_info *info);
471 static int rx_get_frame(struct slgt_info *info);
472 static int rx_get_buf(struct slgt_info *info);
474 static void tx_start(struct slgt_info *info);
475 static void tx_stop(struct slgt_info *info);
476 static void tx_set_idle(struct slgt_info *info);
477 static unsigned int free_tbuf_count(struct slgt_info *info);
478 static void reset_tbufs(struct slgt_info *info);
479 static void tdma_reset(struct slgt_info *info);
480 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
482 static void get_signals(struct slgt_info *info);
483 static void set_signals(struct slgt_info *info);
484 static void enable_loopback(struct slgt_info *info);
485 static void set_rate(struct slgt_info *info, u32 data_rate);
487 static int bh_action(struct slgt_info *info);
488 static void bh_handler(void* context);
489 static void bh_transmit(struct slgt_info *info);
490 static void isr_serial(struct slgt_info *info);
491 static void isr_rdma(struct slgt_info *info);
492 static void isr_txeom(struct slgt_info *info, unsigned short status);
493 static void isr_tdma(struct slgt_info *info);
494 static irqreturn_t slgt_interrupt(int irq, void *dev_id, struct pt_regs * regs);
496 static int alloc_dma_bufs(struct slgt_info *info);
497 static void free_dma_bufs(struct slgt_info *info);
498 static int alloc_desc(struct slgt_info *info);
499 static void free_desc(struct slgt_info *info);
500 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
501 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
503 static int alloc_tmp_rbuf(struct slgt_info *info);
504 static void free_tmp_rbuf(struct slgt_info *info);
506 static void tx_timeout(unsigned long context);
507 static void rx_timeout(unsigned long context);
510 * ioctl handlers
512 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
513 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
514 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
515 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
516 static int set_txidle(struct slgt_info *info, int idle_mode);
517 static int tx_enable(struct slgt_info *info, int enable);
518 static int tx_abort(struct slgt_info *info);
519 static int rx_enable(struct slgt_info *info, int enable);
520 static int modem_input_wait(struct slgt_info *info,int arg);
521 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
522 static int tiocmget(struct tty_struct *tty, struct file *file);
523 static int tiocmset(struct tty_struct *tty, struct file *file,
524 unsigned int set, unsigned int clear);
525 static void set_break(struct tty_struct *tty, int break_state);
526 static int get_interface(struct slgt_info *info, int __user *if_mode);
527 static int set_interface(struct slgt_info *info, int if_mode);
528 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
529 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
530 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
533 * driver functions
535 static void add_device(struct slgt_info *info);
536 static void device_init(int adapter_num, struct pci_dev *pdev);
537 static int claim_resources(struct slgt_info *info);
538 static void release_resources(struct slgt_info *info);
541 * DEBUG OUTPUT CODE
543 #ifndef DBGINFO
544 #define DBGINFO(fmt)
545 #endif
546 #ifndef DBGERR
547 #define DBGERR(fmt)
548 #endif
549 #ifndef DBGBH
550 #define DBGBH(fmt)
551 #endif
552 #ifndef DBGISR
553 #define DBGISR(fmt)
554 #endif
556 #ifdef DBGDATA
557 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
559 int i;
560 int linecount;
561 printk("%s %s data:\n",info->device_name, label);
562 while(count) {
563 linecount = (count > 16) ? 16 : count;
564 for(i=0; i < linecount; i++)
565 printk("%02X ",(unsigned char)data[i]);
566 for(;i<17;i++)
567 printk(" ");
568 for(i=0;i<linecount;i++) {
569 if (data[i]>=040 && data[i]<=0176)
570 printk("%c",data[i]);
571 else
572 printk(".");
574 printk("\n");
575 data += linecount;
576 count -= linecount;
579 #else
580 #define DBGDATA(info, buf, size, label)
581 #endif
583 #ifdef DBGTBUF
584 static void dump_tbufs(struct slgt_info *info)
586 int i;
587 printk("tbuf_current=%d\n", info->tbuf_current);
588 for (i=0 ; i < info->tbuf_count ; i++) {
589 printk("%d: count=%04X status=%04X\n",
590 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
593 #else
594 #define DBGTBUF(info)
595 #endif
597 #ifdef DBGRBUF
598 static void dump_rbufs(struct slgt_info *info)
600 int i;
601 printk("rbuf_current=%d\n", info->rbuf_current);
602 for (i=0 ; i < info->rbuf_count ; i++) {
603 printk("%d: count=%04X status=%04X\n",
604 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
607 #else
608 #define DBGRBUF(info)
609 #endif
611 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
613 #ifdef SANITY_CHECK
614 if (!info) {
615 printk("null struct slgt_info for (%s) in %s\n", devname, name);
616 return 1;
618 if (info->magic != MGSL_MAGIC) {
619 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
620 return 1;
622 #else
623 if (!info)
624 return 1;
625 #endif
626 return 0;
630 * line discipline callback wrappers
632 * The wrappers maintain line discipline references
633 * while calling into the line discipline.
635 * ldisc_receive_buf - pass receive data to line discipline
637 static void ldisc_receive_buf(struct tty_struct *tty,
638 const __u8 *data, char *flags, int count)
640 struct tty_ldisc *ld;
641 if (!tty)
642 return;
643 ld = tty_ldisc_ref(tty);
644 if (ld) {
645 if (ld->receive_buf)
646 ld->receive_buf(tty, data, flags, count);
647 tty_ldisc_deref(ld);
651 /* tty callbacks */
653 static int open(struct tty_struct *tty, struct file *filp)
655 struct slgt_info *info;
656 int retval, line;
657 unsigned long flags;
659 line = tty->index;
660 if ((line < 0) || (line >= slgt_device_count)) {
661 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
662 return -ENODEV;
665 info = slgt_device_list;
666 while(info && info->line != line)
667 info = info->next_device;
668 if (sanity_check(info, tty->name, "open"))
669 return -ENODEV;
670 if (info->init_error) {
671 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
672 return -ENODEV;
675 tty->driver_data = info;
676 info->tty = tty;
678 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
680 /* If port is closing, signal caller to try again */
681 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
682 if (info->flags & ASYNC_CLOSING)
683 interruptible_sleep_on(&info->close_wait);
684 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
685 -EAGAIN : -ERESTARTSYS);
686 goto cleanup;
689 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
691 spin_lock_irqsave(&info->netlock, flags);
692 if (info->netcount) {
693 retval = -EBUSY;
694 spin_unlock_irqrestore(&info->netlock, flags);
695 goto cleanup;
697 info->count++;
698 spin_unlock_irqrestore(&info->netlock, flags);
700 if (info->count == 1) {
701 /* 1st open on this device, init hardware */
702 retval = startup(info);
703 if (retval < 0)
704 goto cleanup;
707 retval = block_til_ready(tty, filp, info);
708 if (retval) {
709 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
710 goto cleanup;
713 retval = 0;
715 cleanup:
716 if (retval) {
717 if (tty->count == 1)
718 info->tty = NULL; /* tty layer will release tty struct */
719 if(info->count)
720 info->count--;
723 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
724 return retval;
727 static void close(struct tty_struct *tty, struct file *filp)
729 struct slgt_info *info = tty->driver_data;
731 if (sanity_check(info, tty->name, "close"))
732 return;
733 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
735 if (!info->count)
736 return;
738 if (tty_hung_up_p(filp))
739 goto cleanup;
741 if ((tty->count == 1) && (info->count != 1)) {
743 * tty->count is 1 and the tty structure will be freed.
744 * info->count should be one in this case.
745 * if it's not, correct it so that the port is shutdown.
747 DBGERR(("%s close: bad refcount; tty->count=1, "
748 "info->count=%d\n", info->device_name, info->count));
749 info->count = 1;
752 info->count--;
754 /* if at least one open remaining, leave hardware active */
755 if (info->count)
756 goto cleanup;
758 info->flags |= ASYNC_CLOSING;
760 /* set tty->closing to notify line discipline to
761 * only process XON/XOFF characters. Only the N_TTY
762 * discipline appears to use this (ppp does not).
764 tty->closing = 1;
766 /* wait for transmit data to clear all layers */
768 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
769 DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
770 tty_wait_until_sent(tty, info->closing_wait);
773 if (info->flags & ASYNC_INITIALIZED)
774 wait_until_sent(tty, info->timeout);
775 if (tty->driver->flush_buffer)
776 tty->driver->flush_buffer(tty);
777 tty_ldisc_flush(tty);
779 shutdown(info);
781 tty->closing = 0;
782 info->tty = NULL;
784 if (info->blocked_open) {
785 if (info->close_delay) {
786 msleep_interruptible(jiffies_to_msecs(info->close_delay));
788 wake_up_interruptible(&info->open_wait);
791 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
793 wake_up_interruptible(&info->close_wait);
795 cleanup:
796 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
799 static void hangup(struct tty_struct *tty)
801 struct slgt_info *info = tty->driver_data;
803 if (sanity_check(info, tty->name, "hangup"))
804 return;
805 DBGINFO(("%s hangup\n", info->device_name));
807 flush_buffer(tty);
808 shutdown(info);
810 info->count = 0;
811 info->flags &= ~ASYNC_NORMAL_ACTIVE;
812 info->tty = NULL;
814 wake_up_interruptible(&info->open_wait);
817 static void set_termios(struct tty_struct *tty, struct termios *old_termios)
819 struct slgt_info *info = tty->driver_data;
820 unsigned long flags;
822 DBGINFO(("%s set_termios\n", tty->driver->name));
824 /* just return if nothing has changed */
825 if ((tty->termios->c_cflag == old_termios->c_cflag)
826 && (RELEVANT_IFLAG(tty->termios->c_iflag)
827 == RELEVANT_IFLAG(old_termios->c_iflag)))
828 return;
830 change_params(info);
832 /* Handle transition to B0 status */
833 if (old_termios->c_cflag & CBAUD &&
834 !(tty->termios->c_cflag & CBAUD)) {
835 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
836 spin_lock_irqsave(&info->lock,flags);
837 set_signals(info);
838 spin_unlock_irqrestore(&info->lock,flags);
841 /* Handle transition away from B0 status */
842 if (!(old_termios->c_cflag & CBAUD) &&
843 tty->termios->c_cflag & CBAUD) {
844 info->signals |= SerialSignal_DTR;
845 if (!(tty->termios->c_cflag & CRTSCTS) ||
846 !test_bit(TTY_THROTTLED, &tty->flags)) {
847 info->signals |= SerialSignal_RTS;
849 spin_lock_irqsave(&info->lock,flags);
850 set_signals(info);
851 spin_unlock_irqrestore(&info->lock,flags);
854 /* Handle turning off CRTSCTS */
855 if (old_termios->c_cflag & CRTSCTS &&
856 !(tty->termios->c_cflag & CRTSCTS)) {
857 tty->hw_stopped = 0;
858 tx_release(tty);
862 static int write(struct tty_struct *tty,
863 const unsigned char *buf, int count)
865 int ret = 0;
866 struct slgt_info *info = tty->driver_data;
867 unsigned long flags;
869 if (sanity_check(info, tty->name, "write"))
870 goto cleanup;
871 DBGINFO(("%s write count=%d\n", info->device_name, count));
873 if (!info->tx_buf)
874 goto cleanup;
876 if (count > info->max_frame_size) {
877 ret = -EIO;
878 goto cleanup;
881 if (!count)
882 goto cleanup;
884 if (info->params.mode == MGSL_MODE_RAW) {
885 unsigned int bufs_needed = (count/DMABUFSIZE);
886 unsigned int bufs_free = free_tbuf_count(info);
887 if (count % DMABUFSIZE)
888 ++bufs_needed;
889 if (bufs_needed > bufs_free)
890 goto cleanup;
891 } else {
892 if (info->tx_active)
893 goto cleanup;
894 if (info->tx_count) {
895 /* send accumulated data from send_char() calls */
896 /* as frame and wait before accepting more data. */
897 tx_load(info, info->tx_buf, info->tx_count);
898 goto start;
902 ret = info->tx_count = count;
903 tx_load(info, buf, count);
904 goto start;
906 start:
907 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
908 spin_lock_irqsave(&info->lock,flags);
909 if (!info->tx_active)
910 tx_start(info);
911 spin_unlock_irqrestore(&info->lock,flags);
914 cleanup:
915 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
916 return ret;
919 static void put_char(struct tty_struct *tty, unsigned char ch)
921 struct slgt_info *info = tty->driver_data;
922 unsigned long flags;
924 if (sanity_check(info, tty->name, "put_char"))
925 return;
926 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
927 if (!info->tx_buf)
928 return;
929 spin_lock_irqsave(&info->lock,flags);
930 if (!info->tx_active && (info->tx_count < info->max_frame_size))
931 info->tx_buf[info->tx_count++] = ch;
932 spin_unlock_irqrestore(&info->lock,flags);
935 static void send_xchar(struct tty_struct *tty, char ch)
937 struct slgt_info *info = tty->driver_data;
938 unsigned long flags;
940 if (sanity_check(info, tty->name, "send_xchar"))
941 return;
942 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
943 info->x_char = ch;
944 if (ch) {
945 spin_lock_irqsave(&info->lock,flags);
946 if (!info->tx_enabled)
947 tx_start(info);
948 spin_unlock_irqrestore(&info->lock,flags);
952 static void wait_until_sent(struct tty_struct *tty, int timeout)
954 struct slgt_info *info = tty->driver_data;
955 unsigned long orig_jiffies, char_time;
957 if (!info )
958 return;
959 if (sanity_check(info, tty->name, "wait_until_sent"))
960 return;
961 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
962 if (!(info->flags & ASYNC_INITIALIZED))
963 goto exit;
965 orig_jiffies = jiffies;
967 /* Set check interval to 1/5 of estimated time to
968 * send a character, and make it at least 1. The check
969 * interval should also be less than the timeout.
970 * Note: use tight timings here to satisfy the NIST-PCTS.
973 if (info->params.data_rate) {
974 char_time = info->timeout/(32 * 5);
975 if (!char_time)
976 char_time++;
977 } else
978 char_time = 1;
980 if (timeout)
981 char_time = min_t(unsigned long, char_time, timeout);
983 while (info->tx_active) {
984 msleep_interruptible(jiffies_to_msecs(char_time));
985 if (signal_pending(current))
986 break;
987 if (timeout && time_after(jiffies, orig_jiffies + timeout))
988 break;
991 exit:
992 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
995 static int write_room(struct tty_struct *tty)
997 struct slgt_info *info = tty->driver_data;
998 int ret;
1000 if (sanity_check(info, tty->name, "write_room"))
1001 return 0;
1002 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1003 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
1004 return ret;
1007 static void flush_chars(struct tty_struct *tty)
1009 struct slgt_info *info = tty->driver_data;
1010 unsigned long flags;
1012 if (sanity_check(info, tty->name, "flush_chars"))
1013 return;
1014 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
1016 if (info->tx_count <= 0 || tty->stopped ||
1017 tty->hw_stopped || !info->tx_buf)
1018 return;
1020 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
1022 spin_lock_irqsave(&info->lock,flags);
1023 if (!info->tx_active && info->tx_count) {
1024 tx_load(info, info->tx_buf,info->tx_count);
1025 tx_start(info);
1027 spin_unlock_irqrestore(&info->lock,flags);
1030 static void flush_buffer(struct tty_struct *tty)
1032 struct slgt_info *info = tty->driver_data;
1033 unsigned long flags;
1035 if (sanity_check(info, tty->name, "flush_buffer"))
1036 return;
1037 DBGINFO(("%s flush_buffer\n", info->device_name));
1039 spin_lock_irqsave(&info->lock,flags);
1040 if (!info->tx_active)
1041 info->tx_count = 0;
1042 spin_unlock_irqrestore(&info->lock,flags);
1044 wake_up_interruptible(&tty->write_wait);
1045 tty_wakeup(tty);
1049 * throttle (stop) transmitter
1051 static void tx_hold(struct tty_struct *tty)
1053 struct slgt_info *info = tty->driver_data;
1054 unsigned long flags;
1056 if (sanity_check(info, tty->name, "tx_hold"))
1057 return;
1058 DBGINFO(("%s tx_hold\n", info->device_name));
1059 spin_lock_irqsave(&info->lock,flags);
1060 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
1061 tx_stop(info);
1062 spin_unlock_irqrestore(&info->lock,flags);
1066 * release (start) transmitter
1068 static void tx_release(struct tty_struct *tty)
1070 struct slgt_info *info = tty->driver_data;
1071 unsigned long flags;
1073 if (sanity_check(info, tty->name, "tx_release"))
1074 return;
1075 DBGINFO(("%s tx_release\n", info->device_name));
1076 spin_lock_irqsave(&info->lock,flags);
1077 if (!info->tx_active && info->tx_count) {
1078 tx_load(info, info->tx_buf, info->tx_count);
1079 tx_start(info);
1081 spin_unlock_irqrestore(&info->lock,flags);
1085 * Service an IOCTL request
1087 * Arguments
1089 * tty pointer to tty instance data
1090 * file pointer to associated file object for device
1091 * cmd IOCTL command code
1092 * arg command argument/context
1094 * Return 0 if success, otherwise error code
1096 static int ioctl(struct tty_struct *tty, struct file *file,
1097 unsigned int cmd, unsigned long arg)
1099 struct slgt_info *info = tty->driver_data;
1100 struct mgsl_icount cnow; /* kernel counter temps */
1101 struct serial_icounter_struct __user *p_cuser; /* user space */
1102 unsigned long flags;
1103 void __user *argp = (void __user *)arg;
1105 if (sanity_check(info, tty->name, "ioctl"))
1106 return -ENODEV;
1107 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1109 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1110 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1111 if (tty->flags & (1 << TTY_IO_ERROR))
1112 return -EIO;
1115 switch (cmd) {
1116 case MGSL_IOCGPARAMS:
1117 return get_params(info, argp);
1118 case MGSL_IOCSPARAMS:
1119 return set_params(info, argp);
1120 case MGSL_IOCGTXIDLE:
1121 return get_txidle(info, argp);
1122 case MGSL_IOCSTXIDLE:
1123 return set_txidle(info, (int)arg);
1124 case MGSL_IOCTXENABLE:
1125 return tx_enable(info, (int)arg);
1126 case MGSL_IOCRXENABLE:
1127 return rx_enable(info, (int)arg);
1128 case MGSL_IOCTXABORT:
1129 return tx_abort(info);
1130 case MGSL_IOCGSTATS:
1131 return get_stats(info, argp);
1132 case MGSL_IOCWAITEVENT:
1133 return wait_mgsl_event(info, argp);
1134 case TIOCMIWAIT:
1135 return modem_input_wait(info,(int)arg);
1136 case MGSL_IOCGIF:
1137 return get_interface(info, argp);
1138 case MGSL_IOCSIF:
1139 return set_interface(info,(int)arg);
1140 case MGSL_IOCSGPIO:
1141 return set_gpio(info, argp);
1142 case MGSL_IOCGGPIO:
1143 return get_gpio(info, argp);
1144 case MGSL_IOCWAITGPIO:
1145 return wait_gpio(info, argp);
1146 case TIOCGICOUNT:
1147 spin_lock_irqsave(&info->lock,flags);
1148 cnow = info->icount;
1149 spin_unlock_irqrestore(&info->lock,flags);
1150 p_cuser = argp;
1151 if (put_user(cnow.cts, &p_cuser->cts) ||
1152 put_user(cnow.dsr, &p_cuser->dsr) ||
1153 put_user(cnow.rng, &p_cuser->rng) ||
1154 put_user(cnow.dcd, &p_cuser->dcd) ||
1155 put_user(cnow.rx, &p_cuser->rx) ||
1156 put_user(cnow.tx, &p_cuser->tx) ||
1157 put_user(cnow.frame, &p_cuser->frame) ||
1158 put_user(cnow.overrun, &p_cuser->overrun) ||
1159 put_user(cnow.parity, &p_cuser->parity) ||
1160 put_user(cnow.brk, &p_cuser->brk) ||
1161 put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1162 return -EFAULT;
1163 return 0;
1164 default:
1165 return -ENOIOCTLCMD;
1167 return 0;
1171 * proc fs support
1173 static inline int line_info(char *buf, struct slgt_info *info)
1175 char stat_buf[30];
1176 int ret;
1177 unsigned long flags;
1179 ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1180 info->device_name, info->phys_reg_addr,
1181 info->irq_level, info->max_frame_size);
1183 /* output current serial signal states */
1184 spin_lock_irqsave(&info->lock,flags);
1185 get_signals(info);
1186 spin_unlock_irqrestore(&info->lock,flags);
1188 stat_buf[0] = 0;
1189 stat_buf[1] = 0;
1190 if (info->signals & SerialSignal_RTS)
1191 strcat(stat_buf, "|RTS");
1192 if (info->signals & SerialSignal_CTS)
1193 strcat(stat_buf, "|CTS");
1194 if (info->signals & SerialSignal_DTR)
1195 strcat(stat_buf, "|DTR");
1196 if (info->signals & SerialSignal_DSR)
1197 strcat(stat_buf, "|DSR");
1198 if (info->signals & SerialSignal_DCD)
1199 strcat(stat_buf, "|CD");
1200 if (info->signals & SerialSignal_RI)
1201 strcat(stat_buf, "|RI");
1203 if (info->params.mode != MGSL_MODE_ASYNC) {
1204 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1205 info->icount.txok, info->icount.rxok);
1206 if (info->icount.txunder)
1207 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1208 if (info->icount.txabort)
1209 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1210 if (info->icount.rxshort)
1211 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1212 if (info->icount.rxlong)
1213 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1214 if (info->icount.rxover)
1215 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1216 if (info->icount.rxcrc)
1217 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
1218 } else {
1219 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1220 info->icount.tx, info->icount.rx);
1221 if (info->icount.frame)
1222 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1223 if (info->icount.parity)
1224 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1225 if (info->icount.brk)
1226 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1227 if (info->icount.overrun)
1228 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1231 /* Append serial signal status to end */
1232 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1234 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1235 info->tx_active,info->bh_requested,info->bh_running,
1236 info->pending_bh);
1238 return ret;
1241 /* Called to print information about devices
1243 static int read_proc(char *page, char **start, off_t off, int count,
1244 int *eof, void *data)
1246 int len = 0, l;
1247 off_t begin = 0;
1248 struct slgt_info *info;
1250 len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
1252 info = slgt_device_list;
1253 while( info ) {
1254 l = line_info(page + len, info);
1255 len += l;
1256 if (len+begin > off+count)
1257 goto done;
1258 if (len+begin < off) {
1259 begin += len;
1260 len = 0;
1262 info = info->next_device;
1265 *eof = 1;
1266 done:
1267 if (off >= len+begin)
1268 return 0;
1269 *start = page + (off-begin);
1270 return ((count < begin+len-off) ? count : begin+len-off);
1274 * return count of bytes in transmit buffer
1276 static int chars_in_buffer(struct tty_struct *tty)
1278 struct slgt_info *info = tty->driver_data;
1279 if (sanity_check(info, tty->name, "chars_in_buffer"))
1280 return 0;
1281 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count));
1282 return info->tx_count;
1286 * signal remote device to throttle send data (our receive data)
1288 static void throttle(struct tty_struct * tty)
1290 struct slgt_info *info = tty->driver_data;
1291 unsigned long flags;
1293 if (sanity_check(info, tty->name, "throttle"))
1294 return;
1295 DBGINFO(("%s throttle\n", info->device_name));
1296 if (I_IXOFF(tty))
1297 send_xchar(tty, STOP_CHAR(tty));
1298 if (tty->termios->c_cflag & CRTSCTS) {
1299 spin_lock_irqsave(&info->lock,flags);
1300 info->signals &= ~SerialSignal_RTS;
1301 set_signals(info);
1302 spin_unlock_irqrestore(&info->lock,flags);
1307 * signal remote device to stop throttling send data (our receive data)
1309 static void unthrottle(struct tty_struct * tty)
1311 struct slgt_info *info = tty->driver_data;
1312 unsigned long flags;
1314 if (sanity_check(info, tty->name, "unthrottle"))
1315 return;
1316 DBGINFO(("%s unthrottle\n", info->device_name));
1317 if (I_IXOFF(tty)) {
1318 if (info->x_char)
1319 info->x_char = 0;
1320 else
1321 send_xchar(tty, START_CHAR(tty));
1323 if (tty->termios->c_cflag & CRTSCTS) {
1324 spin_lock_irqsave(&info->lock,flags);
1325 info->signals |= SerialSignal_RTS;
1326 set_signals(info);
1327 spin_unlock_irqrestore(&info->lock,flags);
1332 * set or clear transmit break condition
1333 * break_state -1=set break condition, 0=clear
1335 static void set_break(struct tty_struct *tty, int break_state)
1337 struct slgt_info *info = tty->driver_data;
1338 unsigned short value;
1339 unsigned long flags;
1341 if (sanity_check(info, tty->name, "set_break"))
1342 return;
1343 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1345 spin_lock_irqsave(&info->lock,flags);
1346 value = rd_reg16(info, TCR);
1347 if (break_state == -1)
1348 value |= BIT6;
1349 else
1350 value &= ~BIT6;
1351 wr_reg16(info, TCR, value);
1352 spin_unlock_irqrestore(&info->lock,flags);
1355 #ifdef CONFIG_HDLC
1358 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1359 * set encoding and frame check sequence (FCS) options
1361 * dev pointer to network device structure
1362 * encoding serial encoding setting
1363 * parity FCS setting
1365 * returns 0 if success, otherwise error code
1367 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1368 unsigned short parity)
1370 struct slgt_info *info = dev_to_port(dev);
1371 unsigned char new_encoding;
1372 unsigned short new_crctype;
1374 /* return error if TTY interface open */
1375 if (info->count)
1376 return -EBUSY;
1378 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1380 switch (encoding)
1382 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1383 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1384 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1385 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1386 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1387 default: return -EINVAL;
1390 switch (parity)
1392 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1393 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1394 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1395 default: return -EINVAL;
1398 info->params.encoding = new_encoding;
1399 info->params.crc_type = new_crctype;
1401 /* if network interface up, reprogram hardware */
1402 if (info->netcount)
1403 program_hw(info);
1405 return 0;
1409 * called by generic HDLC layer to send frame
1411 * skb socket buffer containing HDLC frame
1412 * dev pointer to network device structure
1414 * returns 0 if success, otherwise error code
1416 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1418 struct slgt_info *info = dev_to_port(dev);
1419 struct net_device_stats *stats = hdlc_stats(dev);
1420 unsigned long flags;
1422 DBGINFO(("%s hdlc_xmit\n", dev->name));
1424 /* stop sending until this frame completes */
1425 netif_stop_queue(dev);
1427 /* copy data to device buffers */
1428 info->tx_count = skb->len;
1429 tx_load(info, skb->data, skb->len);
1431 /* update network statistics */
1432 stats->tx_packets++;
1433 stats->tx_bytes += skb->len;
1435 /* done with socket buffer, so free it */
1436 dev_kfree_skb(skb);
1438 /* save start time for transmit timeout detection */
1439 dev->trans_start = jiffies;
1441 /* start hardware transmitter if necessary */
1442 spin_lock_irqsave(&info->lock,flags);
1443 if (!info->tx_active)
1444 tx_start(info);
1445 spin_unlock_irqrestore(&info->lock,flags);
1447 return 0;
1451 * called by network layer when interface enabled
1452 * claim resources and initialize hardware
1454 * dev pointer to network device structure
1456 * returns 0 if success, otherwise error code
1458 static int hdlcdev_open(struct net_device *dev)
1460 struct slgt_info *info = dev_to_port(dev);
1461 int rc;
1462 unsigned long flags;
1464 DBGINFO(("%s hdlcdev_open\n", dev->name));
1466 /* generic HDLC layer open processing */
1467 if ((rc = hdlc_open(dev)))
1468 return rc;
1470 /* arbitrate between network and tty opens */
1471 spin_lock_irqsave(&info->netlock, flags);
1472 if (info->count != 0 || info->netcount != 0) {
1473 DBGINFO(("%s hdlc_open busy\n", dev->name));
1474 spin_unlock_irqrestore(&info->netlock, flags);
1475 return -EBUSY;
1477 info->netcount=1;
1478 spin_unlock_irqrestore(&info->netlock, flags);
1480 /* claim resources and init adapter */
1481 if ((rc = startup(info)) != 0) {
1482 spin_lock_irqsave(&info->netlock, flags);
1483 info->netcount=0;
1484 spin_unlock_irqrestore(&info->netlock, flags);
1485 return rc;
1488 /* assert DTR and RTS, apply hardware settings */
1489 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1490 program_hw(info);
1492 /* enable network layer transmit */
1493 dev->trans_start = jiffies;
1494 netif_start_queue(dev);
1496 /* inform generic HDLC layer of current DCD status */
1497 spin_lock_irqsave(&info->lock, flags);
1498 get_signals(info);
1499 spin_unlock_irqrestore(&info->lock, flags);
1500 hdlc_set_carrier(info->signals & SerialSignal_DCD, dev);
1502 return 0;
1506 * called by network layer when interface is disabled
1507 * shutdown hardware and release resources
1509 * dev pointer to network device structure
1511 * returns 0 if success, otherwise error code
1513 static int hdlcdev_close(struct net_device *dev)
1515 struct slgt_info *info = dev_to_port(dev);
1516 unsigned long flags;
1518 DBGINFO(("%s hdlcdev_close\n", dev->name));
1520 netif_stop_queue(dev);
1522 /* shutdown adapter and release resources */
1523 shutdown(info);
1525 hdlc_close(dev);
1527 spin_lock_irqsave(&info->netlock, flags);
1528 info->netcount=0;
1529 spin_unlock_irqrestore(&info->netlock, flags);
1531 return 0;
1535 * called by network layer to process IOCTL call to network device
1537 * dev pointer to network device structure
1538 * ifr pointer to network interface request structure
1539 * cmd IOCTL command code
1541 * returns 0 if success, otherwise error code
1543 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1545 const size_t size = sizeof(sync_serial_settings);
1546 sync_serial_settings new_line;
1547 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1548 struct slgt_info *info = dev_to_port(dev);
1549 unsigned int flags;
1551 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1553 /* return error if TTY interface open */
1554 if (info->count)
1555 return -EBUSY;
1557 if (cmd != SIOCWANDEV)
1558 return hdlc_ioctl(dev, ifr, cmd);
1560 switch(ifr->ifr_settings.type) {
1561 case IF_GET_IFACE: /* return current sync_serial_settings */
1563 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1564 if (ifr->ifr_settings.size < size) {
1565 ifr->ifr_settings.size = size; /* data size wanted */
1566 return -ENOBUFS;
1569 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1570 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1571 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1572 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1574 switch (flags){
1575 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1576 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1577 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1578 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1579 default: new_line.clock_type = CLOCK_DEFAULT;
1582 new_line.clock_rate = info->params.clock_speed;
1583 new_line.loopback = info->params.loopback ? 1:0;
1585 if (copy_to_user(line, &new_line, size))
1586 return -EFAULT;
1587 return 0;
1589 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1591 if(!capable(CAP_NET_ADMIN))
1592 return -EPERM;
1593 if (copy_from_user(&new_line, line, size))
1594 return -EFAULT;
1596 switch (new_line.clock_type)
1598 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1599 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1600 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1601 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1602 case CLOCK_DEFAULT: flags = info->params.flags &
1603 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1604 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1605 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1606 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1607 default: return -EINVAL;
1610 if (new_line.loopback != 0 && new_line.loopback != 1)
1611 return -EINVAL;
1613 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1614 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1615 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1616 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1617 info->params.flags |= flags;
1619 info->params.loopback = new_line.loopback;
1621 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1622 info->params.clock_speed = new_line.clock_rate;
1623 else
1624 info->params.clock_speed = 0;
1626 /* if network interface up, reprogram hardware */
1627 if (info->netcount)
1628 program_hw(info);
1629 return 0;
1631 default:
1632 return hdlc_ioctl(dev, ifr, cmd);
1637 * called by network layer when transmit timeout is detected
1639 * dev pointer to network device structure
1641 static void hdlcdev_tx_timeout(struct net_device *dev)
1643 struct slgt_info *info = dev_to_port(dev);
1644 struct net_device_stats *stats = hdlc_stats(dev);
1645 unsigned long flags;
1647 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1649 stats->tx_errors++;
1650 stats->tx_aborted_errors++;
1652 spin_lock_irqsave(&info->lock,flags);
1653 tx_stop(info);
1654 spin_unlock_irqrestore(&info->lock,flags);
1656 netif_wake_queue(dev);
1660 * called by device driver when transmit completes
1661 * reenable network layer transmit if stopped
1663 * info pointer to device instance information
1665 static void hdlcdev_tx_done(struct slgt_info *info)
1667 if (netif_queue_stopped(info->netdev))
1668 netif_wake_queue(info->netdev);
1672 * called by device driver when frame received
1673 * pass frame to network layer
1675 * info pointer to device instance information
1676 * buf pointer to buffer contianing frame data
1677 * size count of data bytes in buf
1679 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1681 struct sk_buff *skb = dev_alloc_skb(size);
1682 struct net_device *dev = info->netdev;
1683 struct net_device_stats *stats = hdlc_stats(dev);
1685 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1687 if (skb == NULL) {
1688 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1689 stats->rx_dropped++;
1690 return;
1693 memcpy(skb_put(skb, size),buf,size);
1695 skb->protocol = hdlc_type_trans(skb, info->netdev);
1697 stats->rx_packets++;
1698 stats->rx_bytes += size;
1700 netif_rx(skb);
1702 info->netdev->last_rx = jiffies;
1706 * called by device driver when adding device instance
1707 * do generic HDLC initialization
1709 * info pointer to device instance information
1711 * returns 0 if success, otherwise error code
1713 static int hdlcdev_init(struct slgt_info *info)
1715 int rc;
1716 struct net_device *dev;
1717 hdlc_device *hdlc;
1719 /* allocate and initialize network and HDLC layer objects */
1721 if (!(dev = alloc_hdlcdev(info))) {
1722 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1723 return -ENOMEM;
1726 /* for network layer reporting purposes only */
1727 dev->mem_start = info->phys_reg_addr;
1728 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1729 dev->irq = info->irq_level;
1731 /* network layer callbacks and settings */
1732 dev->do_ioctl = hdlcdev_ioctl;
1733 dev->open = hdlcdev_open;
1734 dev->stop = hdlcdev_close;
1735 dev->tx_timeout = hdlcdev_tx_timeout;
1736 dev->watchdog_timeo = 10*HZ;
1737 dev->tx_queue_len = 50;
1739 /* generic HDLC layer callbacks and settings */
1740 hdlc = dev_to_hdlc(dev);
1741 hdlc->attach = hdlcdev_attach;
1742 hdlc->xmit = hdlcdev_xmit;
1744 /* register objects with HDLC layer */
1745 if ((rc = register_hdlc_device(dev))) {
1746 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1747 free_netdev(dev);
1748 return rc;
1751 info->netdev = dev;
1752 return 0;
1756 * called by device driver when removing device instance
1757 * do generic HDLC cleanup
1759 * info pointer to device instance information
1761 static void hdlcdev_exit(struct slgt_info *info)
1763 unregister_hdlc_device(info->netdev);
1764 free_netdev(info->netdev);
1765 info->netdev = NULL;
1768 #endif /* ifdef CONFIG_HDLC */
1771 * get async data from rx DMA buffers
1773 static void rx_async(struct slgt_info *info)
1775 struct tty_struct *tty = info->tty;
1776 struct mgsl_icount *icount = &info->icount;
1777 unsigned int start, end;
1778 unsigned char *p;
1779 unsigned char status;
1780 struct slgt_desc *bufs = info->rbufs;
1781 int i, count;
1782 int chars = 0;
1783 int stat;
1784 unsigned char ch;
1786 start = end = info->rbuf_current;
1788 while(desc_complete(bufs[end])) {
1789 count = desc_count(bufs[end]) - info->rbuf_index;
1790 p = bufs[end].buf + info->rbuf_index;
1792 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1793 DBGDATA(info, p, count, "rx");
1795 for(i=0 ; i < count; i+=2, p+=2) {
1796 ch = *p;
1797 icount->rx++;
1799 stat = 0;
1801 if ((status = *(p+1) & (BIT9 + BIT8))) {
1802 if (status & BIT9)
1803 icount->parity++;
1804 else if (status & BIT8)
1805 icount->frame++;
1806 /* discard char if tty control flags say so */
1807 if (status & info->ignore_status_mask)
1808 continue;
1809 if (status & BIT9)
1810 stat = TTY_PARITY;
1811 else if (status & BIT8)
1812 stat = TTY_FRAME;
1814 if (tty) {
1815 tty_insert_flip_char(tty, ch, stat);
1816 chars++;
1820 if (i < count) {
1821 /* receive buffer not completed */
1822 info->rbuf_index += i;
1823 info->rx_timer.expires = jiffies + 1;
1824 add_timer(&info->rx_timer);
1825 break;
1828 info->rbuf_index = 0;
1829 free_rbufs(info, end, end);
1831 if (++end == info->rbuf_count)
1832 end = 0;
1834 /* if entire list searched then no frame available */
1835 if (end == start)
1836 break;
1839 if (tty && chars)
1840 tty_flip_buffer_push(tty);
1844 * return next bottom half action to perform
1846 static int bh_action(struct slgt_info *info)
1848 unsigned long flags;
1849 int rc;
1851 spin_lock_irqsave(&info->lock,flags);
1853 if (info->pending_bh & BH_RECEIVE) {
1854 info->pending_bh &= ~BH_RECEIVE;
1855 rc = BH_RECEIVE;
1856 } else if (info->pending_bh & BH_TRANSMIT) {
1857 info->pending_bh &= ~BH_TRANSMIT;
1858 rc = BH_TRANSMIT;
1859 } else if (info->pending_bh & BH_STATUS) {
1860 info->pending_bh &= ~BH_STATUS;
1861 rc = BH_STATUS;
1862 } else {
1863 /* Mark BH routine as complete */
1864 info->bh_running = 0;
1865 info->bh_requested = 0;
1866 rc = 0;
1869 spin_unlock_irqrestore(&info->lock,flags);
1871 return rc;
1875 * perform bottom half processing
1877 static void bh_handler(void* context)
1879 struct slgt_info *info = context;
1880 int action;
1882 if (!info)
1883 return;
1884 info->bh_running = 1;
1886 while((action = bh_action(info))) {
1887 switch (action) {
1888 case BH_RECEIVE:
1889 DBGBH(("%s bh receive\n", info->device_name));
1890 switch(info->params.mode) {
1891 case MGSL_MODE_ASYNC:
1892 rx_async(info);
1893 break;
1894 case MGSL_MODE_HDLC:
1895 while(rx_get_frame(info));
1896 break;
1897 case MGSL_MODE_RAW:
1898 while(rx_get_buf(info));
1899 break;
1901 /* restart receiver if rx DMA buffers exhausted */
1902 if (info->rx_restart)
1903 rx_start(info);
1904 break;
1905 case BH_TRANSMIT:
1906 bh_transmit(info);
1907 break;
1908 case BH_STATUS:
1909 DBGBH(("%s bh status\n", info->device_name));
1910 info->ri_chkcount = 0;
1911 info->dsr_chkcount = 0;
1912 info->dcd_chkcount = 0;
1913 info->cts_chkcount = 0;
1914 break;
1915 default:
1916 DBGBH(("%s unknown action\n", info->device_name));
1917 break;
1920 DBGBH(("%s bh_handler exit\n", info->device_name));
1923 static void bh_transmit(struct slgt_info *info)
1925 struct tty_struct *tty = info->tty;
1927 DBGBH(("%s bh_transmit\n", info->device_name));
1928 if (tty) {
1929 tty_wakeup(tty);
1930 wake_up_interruptible(&tty->write_wait);
1934 static void dsr_change(struct slgt_info *info)
1936 get_signals(info);
1937 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
1938 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
1939 slgt_irq_off(info, IRQ_DSR);
1940 return;
1942 info->icount.dsr++;
1943 if (info->signals & SerialSignal_DSR)
1944 info->input_signal_events.dsr_up++;
1945 else
1946 info->input_signal_events.dsr_down++;
1947 wake_up_interruptible(&info->status_event_wait_q);
1948 wake_up_interruptible(&info->event_wait_q);
1949 info->pending_bh |= BH_STATUS;
1952 static void cts_change(struct slgt_info *info)
1954 get_signals(info);
1955 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
1956 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
1957 slgt_irq_off(info, IRQ_CTS);
1958 return;
1960 info->icount.cts++;
1961 if (info->signals & SerialSignal_CTS)
1962 info->input_signal_events.cts_up++;
1963 else
1964 info->input_signal_events.cts_down++;
1965 wake_up_interruptible(&info->status_event_wait_q);
1966 wake_up_interruptible(&info->event_wait_q);
1967 info->pending_bh |= BH_STATUS;
1969 if (info->flags & ASYNC_CTS_FLOW) {
1970 if (info->tty) {
1971 if (info->tty->hw_stopped) {
1972 if (info->signals & SerialSignal_CTS) {
1973 info->tty->hw_stopped = 0;
1974 info->pending_bh |= BH_TRANSMIT;
1975 return;
1977 } else {
1978 if (!(info->signals & SerialSignal_CTS))
1979 info->tty->hw_stopped = 1;
1985 static void dcd_change(struct slgt_info *info)
1987 get_signals(info);
1988 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
1989 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
1990 slgt_irq_off(info, IRQ_DCD);
1991 return;
1993 info->icount.dcd++;
1994 if (info->signals & SerialSignal_DCD) {
1995 info->input_signal_events.dcd_up++;
1996 } else {
1997 info->input_signal_events.dcd_down++;
1999 #ifdef CONFIG_HDLC
2000 if (info->netcount)
2001 hdlc_set_carrier(info->signals & SerialSignal_DCD, info->netdev);
2002 #endif
2003 wake_up_interruptible(&info->status_event_wait_q);
2004 wake_up_interruptible(&info->event_wait_q);
2005 info->pending_bh |= BH_STATUS;
2007 if (info->flags & ASYNC_CHECK_CD) {
2008 if (info->signals & SerialSignal_DCD)
2009 wake_up_interruptible(&info->open_wait);
2010 else {
2011 if (info->tty)
2012 tty_hangup(info->tty);
2017 static void ri_change(struct slgt_info *info)
2019 get_signals(info);
2020 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2021 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2022 slgt_irq_off(info, IRQ_RI);
2023 return;
2025 info->icount.dcd++;
2026 if (info->signals & SerialSignal_RI) {
2027 info->input_signal_events.ri_up++;
2028 } else {
2029 info->input_signal_events.ri_down++;
2031 wake_up_interruptible(&info->status_event_wait_q);
2032 wake_up_interruptible(&info->event_wait_q);
2033 info->pending_bh |= BH_STATUS;
2036 static void isr_serial(struct slgt_info *info)
2038 unsigned short status = rd_reg16(info, SSR);
2040 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2042 wr_reg16(info, SSR, status); /* clear pending */
2044 info->irq_occurred = 1;
2046 if (info->params.mode == MGSL_MODE_ASYNC) {
2047 if (status & IRQ_TXIDLE) {
2048 if (info->tx_count)
2049 isr_txeom(info, status);
2051 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2052 info->icount.brk++;
2053 /* process break detection if tty control allows */
2054 if (info->tty) {
2055 if (!(status & info->ignore_status_mask)) {
2056 if (info->read_status_mask & MASK_BREAK) {
2057 tty_insert_flip_char(info->tty, 0, TTY_BREAK);
2058 if (info->flags & ASYNC_SAK)
2059 do_SAK(info->tty);
2064 } else {
2065 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2066 isr_txeom(info, status);
2068 if (status & IRQ_RXIDLE) {
2069 if (status & RXIDLE)
2070 info->icount.rxidle++;
2071 else
2072 info->icount.exithunt++;
2073 wake_up_interruptible(&info->event_wait_q);
2076 if (status & IRQ_RXOVER)
2077 rx_start(info);
2080 if (status & IRQ_DSR)
2081 dsr_change(info);
2082 if (status & IRQ_CTS)
2083 cts_change(info);
2084 if (status & IRQ_DCD)
2085 dcd_change(info);
2086 if (status & IRQ_RI)
2087 ri_change(info);
2090 static void isr_rdma(struct slgt_info *info)
2092 unsigned int status = rd_reg32(info, RDCSR);
2094 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2096 /* RDCSR (rx DMA control/status)
2098 * 31..07 reserved
2099 * 06 save status byte to DMA buffer
2100 * 05 error
2101 * 04 eol (end of list)
2102 * 03 eob (end of buffer)
2103 * 02 IRQ enable
2104 * 01 reset
2105 * 00 enable
2107 wr_reg32(info, RDCSR, status); /* clear pending */
2109 if (status & (BIT5 + BIT4)) {
2110 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2111 info->rx_restart = 1;
2113 info->pending_bh |= BH_RECEIVE;
2116 static void isr_tdma(struct slgt_info *info)
2118 unsigned int status = rd_reg32(info, TDCSR);
2120 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2122 /* TDCSR (tx DMA control/status)
2124 * 31..06 reserved
2125 * 05 error
2126 * 04 eol (end of list)
2127 * 03 eob (end of buffer)
2128 * 02 IRQ enable
2129 * 01 reset
2130 * 00 enable
2132 wr_reg32(info, TDCSR, status); /* clear pending */
2134 if (status & (BIT5 + BIT4 + BIT3)) {
2135 // another transmit buffer has completed
2136 // run bottom half to get more send data from user
2137 info->pending_bh |= BH_TRANSMIT;
2141 static void isr_txeom(struct slgt_info *info, unsigned short status)
2143 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2145 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2146 tdma_reset(info);
2147 reset_tbufs(info);
2148 if (status & IRQ_TXUNDER) {
2149 unsigned short val = rd_reg16(info, TCR);
2150 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2151 wr_reg16(info, TCR, val); /* clear reset bit */
2154 if (info->tx_active) {
2155 if (info->params.mode != MGSL_MODE_ASYNC) {
2156 if (status & IRQ_TXUNDER)
2157 info->icount.txunder++;
2158 else if (status & IRQ_TXIDLE)
2159 info->icount.txok++;
2162 info->tx_active = 0;
2163 info->tx_count = 0;
2165 del_timer(&info->tx_timer);
2167 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2168 info->signals &= ~SerialSignal_RTS;
2169 info->drop_rts_on_tx_done = 0;
2170 set_signals(info);
2173 #ifdef CONFIG_HDLC
2174 if (info->netcount)
2175 hdlcdev_tx_done(info);
2176 else
2177 #endif
2179 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2180 tx_stop(info);
2181 return;
2183 info->pending_bh |= BH_TRANSMIT;
2188 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2190 struct cond_wait *w, *prev;
2192 /* wake processes waiting for specific transitions */
2193 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2194 if (w->data & changed) {
2195 w->data = state;
2196 wake_up_interruptible(&w->q);
2197 if (prev != NULL)
2198 prev->next = w->next;
2199 else
2200 info->gpio_wait_q = w->next;
2201 } else
2202 prev = w;
2206 /* interrupt service routine
2208 * irq interrupt number
2209 * dev_id device ID supplied during interrupt registration
2210 * regs interrupted processor context
2212 static irqreturn_t slgt_interrupt(int irq, void *dev_id, struct pt_regs * regs)
2214 struct slgt_info *info;
2215 unsigned int gsr;
2216 unsigned int i;
2218 DBGISR(("slgt_interrupt irq=%d entry\n", irq));
2220 info = dev_id;
2221 if (!info)
2222 return IRQ_NONE;
2224 spin_lock(&info->lock);
2226 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2227 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2228 info->irq_occurred = 1;
2229 for(i=0; i < info->port_count ; i++) {
2230 if (info->port_array[i] == NULL)
2231 continue;
2232 if (gsr & (BIT8 << i))
2233 isr_serial(info->port_array[i]);
2234 if (gsr & (BIT16 << (i*2)))
2235 isr_rdma(info->port_array[i]);
2236 if (gsr & (BIT17 << (i*2)))
2237 isr_tdma(info->port_array[i]);
2241 if (info->gpio_present) {
2242 unsigned int state;
2243 unsigned int changed;
2244 while ((changed = rd_reg32(info, IOSR)) != 0) {
2245 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2246 /* read latched state of GPIO signals */
2247 state = rd_reg32(info, IOVR);
2248 /* clear pending GPIO interrupt bits */
2249 wr_reg32(info, IOSR, changed);
2250 for (i=0 ; i < info->port_count ; i++) {
2251 if (info->port_array[i] != NULL)
2252 isr_gpio(info->port_array[i], changed, state);
2257 for(i=0; i < info->port_count ; i++) {
2258 struct slgt_info *port = info->port_array[i];
2260 if (port && (port->count || port->netcount) &&
2261 port->pending_bh && !port->bh_running &&
2262 !port->bh_requested) {
2263 DBGISR(("%s bh queued\n", port->device_name));
2264 schedule_work(&port->task);
2265 port->bh_requested = 1;
2269 spin_unlock(&info->lock);
2271 DBGISR(("slgt_interrupt irq=%d exit\n", irq));
2272 return IRQ_HANDLED;
2275 static int startup(struct slgt_info *info)
2277 DBGINFO(("%s startup\n", info->device_name));
2279 if (info->flags & ASYNC_INITIALIZED)
2280 return 0;
2282 if (!info->tx_buf) {
2283 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2284 if (!info->tx_buf) {
2285 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2286 return -ENOMEM;
2290 info->pending_bh = 0;
2292 memset(&info->icount, 0, sizeof(info->icount));
2294 /* program hardware for current parameters */
2295 change_params(info);
2297 if (info->tty)
2298 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2300 info->flags |= ASYNC_INITIALIZED;
2302 return 0;
2306 * called by close() and hangup() to shutdown hardware
2308 static void shutdown(struct slgt_info *info)
2310 unsigned long flags;
2312 if (!(info->flags & ASYNC_INITIALIZED))
2313 return;
2315 DBGINFO(("%s shutdown\n", info->device_name));
2317 /* clear status wait queue because status changes */
2318 /* can't happen after shutting down the hardware */
2319 wake_up_interruptible(&info->status_event_wait_q);
2320 wake_up_interruptible(&info->event_wait_q);
2322 del_timer_sync(&info->tx_timer);
2323 del_timer_sync(&info->rx_timer);
2325 kfree(info->tx_buf);
2326 info->tx_buf = NULL;
2328 spin_lock_irqsave(&info->lock,flags);
2330 tx_stop(info);
2331 rx_stop(info);
2333 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2335 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2336 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2337 set_signals(info);
2340 flush_cond_wait(&info->gpio_wait_q);
2342 spin_unlock_irqrestore(&info->lock,flags);
2344 if (info->tty)
2345 set_bit(TTY_IO_ERROR, &info->tty->flags);
2347 info->flags &= ~ASYNC_INITIALIZED;
2350 static void program_hw(struct slgt_info *info)
2352 unsigned long flags;
2354 spin_lock_irqsave(&info->lock,flags);
2356 rx_stop(info);
2357 tx_stop(info);
2359 if (info->params.mode == MGSL_MODE_HDLC ||
2360 info->params.mode == MGSL_MODE_RAW ||
2361 info->netcount)
2362 hdlc_mode(info);
2363 else
2364 async_mode(info);
2366 set_signals(info);
2368 info->dcd_chkcount = 0;
2369 info->cts_chkcount = 0;
2370 info->ri_chkcount = 0;
2371 info->dsr_chkcount = 0;
2373 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
2374 get_signals(info);
2376 if (info->netcount ||
2377 (info->tty && info->tty->termios->c_cflag & CREAD))
2378 rx_start(info);
2380 spin_unlock_irqrestore(&info->lock,flags);
2384 * reconfigure adapter based on new parameters
2386 static void change_params(struct slgt_info *info)
2388 unsigned cflag;
2389 int bits_per_char;
2391 if (!info->tty || !info->tty->termios)
2392 return;
2393 DBGINFO(("%s change_params\n", info->device_name));
2395 cflag = info->tty->termios->c_cflag;
2397 /* if B0 rate (hangup) specified then negate DTR and RTS */
2398 /* otherwise assert DTR and RTS */
2399 if (cflag & CBAUD)
2400 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2401 else
2402 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2404 /* byte size and parity */
2406 switch (cflag & CSIZE) {
2407 case CS5: info->params.data_bits = 5; break;
2408 case CS6: info->params.data_bits = 6; break;
2409 case CS7: info->params.data_bits = 7; break;
2410 case CS8: info->params.data_bits = 8; break;
2411 default: info->params.data_bits = 7; break;
2414 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2416 if (cflag & PARENB)
2417 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2418 else
2419 info->params.parity = ASYNC_PARITY_NONE;
2421 /* calculate number of jiffies to transmit a full
2422 * FIFO (32 bytes) at specified data rate
2424 bits_per_char = info->params.data_bits +
2425 info->params.stop_bits + 1;
2427 info->params.data_rate = tty_get_baud_rate(info->tty);
2429 if (info->params.data_rate) {
2430 info->timeout = (32*HZ*bits_per_char) /
2431 info->params.data_rate;
2433 info->timeout += HZ/50; /* Add .02 seconds of slop */
2435 if (cflag & CRTSCTS)
2436 info->flags |= ASYNC_CTS_FLOW;
2437 else
2438 info->flags &= ~ASYNC_CTS_FLOW;
2440 if (cflag & CLOCAL)
2441 info->flags &= ~ASYNC_CHECK_CD;
2442 else
2443 info->flags |= ASYNC_CHECK_CD;
2445 /* process tty input control flags */
2447 info->read_status_mask = IRQ_RXOVER;
2448 if (I_INPCK(info->tty))
2449 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2450 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2451 info->read_status_mask |= MASK_BREAK;
2452 if (I_IGNPAR(info->tty))
2453 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2454 if (I_IGNBRK(info->tty)) {
2455 info->ignore_status_mask |= MASK_BREAK;
2456 /* If ignoring parity and break indicators, ignore
2457 * overruns too. (For real raw support).
2459 if (I_IGNPAR(info->tty))
2460 info->ignore_status_mask |= MASK_OVERRUN;
2463 program_hw(info);
2466 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2468 DBGINFO(("%s get_stats\n", info->device_name));
2469 if (!user_icount) {
2470 memset(&info->icount, 0, sizeof(info->icount));
2471 } else {
2472 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2473 return -EFAULT;
2475 return 0;
2478 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2480 DBGINFO(("%s get_params\n", info->device_name));
2481 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2482 return -EFAULT;
2483 return 0;
2486 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2488 unsigned long flags;
2489 MGSL_PARAMS tmp_params;
2491 DBGINFO(("%s set_params\n", info->device_name));
2492 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2493 return -EFAULT;
2495 spin_lock_irqsave(&info->lock, flags);
2496 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2497 spin_unlock_irqrestore(&info->lock, flags);
2499 change_params(info);
2501 return 0;
2504 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2506 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2507 if (put_user(info->idle_mode, idle_mode))
2508 return -EFAULT;
2509 return 0;
2512 static int set_txidle(struct slgt_info *info, int idle_mode)
2514 unsigned long flags;
2515 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2516 spin_lock_irqsave(&info->lock,flags);
2517 info->idle_mode = idle_mode;
2518 if (info->params.mode != MGSL_MODE_ASYNC)
2519 tx_set_idle(info);
2520 spin_unlock_irqrestore(&info->lock,flags);
2521 return 0;
2524 static int tx_enable(struct slgt_info *info, int enable)
2526 unsigned long flags;
2527 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2528 spin_lock_irqsave(&info->lock,flags);
2529 if (enable) {
2530 if (!info->tx_enabled)
2531 tx_start(info);
2532 } else {
2533 if (info->tx_enabled)
2534 tx_stop(info);
2536 spin_unlock_irqrestore(&info->lock,flags);
2537 return 0;
2541 * abort transmit HDLC frame
2543 static int tx_abort(struct slgt_info *info)
2545 unsigned long flags;
2546 DBGINFO(("%s tx_abort\n", info->device_name));
2547 spin_lock_irqsave(&info->lock,flags);
2548 tdma_reset(info);
2549 spin_unlock_irqrestore(&info->lock,flags);
2550 return 0;
2553 static int rx_enable(struct slgt_info *info, int enable)
2555 unsigned long flags;
2556 DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable));
2557 spin_lock_irqsave(&info->lock,flags);
2558 if (enable) {
2559 if (!info->rx_enabled)
2560 rx_start(info);
2561 } else {
2562 if (info->rx_enabled)
2563 rx_stop(info);
2565 spin_unlock_irqrestore(&info->lock,flags);
2566 return 0;
2570 * wait for specified event to occur
2572 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2574 unsigned long flags;
2575 int s;
2576 int rc=0;
2577 struct mgsl_icount cprev, cnow;
2578 int events;
2579 int mask;
2580 struct _input_signal_events oldsigs, newsigs;
2581 DECLARE_WAITQUEUE(wait, current);
2583 if (get_user(mask, mask_ptr))
2584 return -EFAULT;
2586 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2588 spin_lock_irqsave(&info->lock,flags);
2590 /* return immediately if state matches requested events */
2591 get_signals(info);
2592 s = info->signals;
2594 events = mask &
2595 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2596 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2597 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2598 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2599 if (events) {
2600 spin_unlock_irqrestore(&info->lock,flags);
2601 goto exit;
2604 /* save current irq counts */
2605 cprev = info->icount;
2606 oldsigs = info->input_signal_events;
2608 /* enable hunt and idle irqs if needed */
2609 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2610 unsigned short val = rd_reg16(info, SCR);
2611 if (!(val & IRQ_RXIDLE))
2612 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2615 set_current_state(TASK_INTERRUPTIBLE);
2616 add_wait_queue(&info->event_wait_q, &wait);
2618 spin_unlock_irqrestore(&info->lock,flags);
2620 for(;;) {
2621 schedule();
2622 if (signal_pending(current)) {
2623 rc = -ERESTARTSYS;
2624 break;
2627 /* get current irq counts */
2628 spin_lock_irqsave(&info->lock,flags);
2629 cnow = info->icount;
2630 newsigs = info->input_signal_events;
2631 set_current_state(TASK_INTERRUPTIBLE);
2632 spin_unlock_irqrestore(&info->lock,flags);
2634 /* if no change, wait aborted for some reason */
2635 if (newsigs.dsr_up == oldsigs.dsr_up &&
2636 newsigs.dsr_down == oldsigs.dsr_down &&
2637 newsigs.dcd_up == oldsigs.dcd_up &&
2638 newsigs.dcd_down == oldsigs.dcd_down &&
2639 newsigs.cts_up == oldsigs.cts_up &&
2640 newsigs.cts_down == oldsigs.cts_down &&
2641 newsigs.ri_up == oldsigs.ri_up &&
2642 newsigs.ri_down == oldsigs.ri_down &&
2643 cnow.exithunt == cprev.exithunt &&
2644 cnow.rxidle == cprev.rxidle) {
2645 rc = -EIO;
2646 break;
2649 events = mask &
2650 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2651 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2652 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2653 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2654 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2655 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2656 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2657 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2658 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2659 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2660 if (events)
2661 break;
2663 cprev = cnow;
2664 oldsigs = newsigs;
2667 remove_wait_queue(&info->event_wait_q, &wait);
2668 set_current_state(TASK_RUNNING);
2671 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2672 spin_lock_irqsave(&info->lock,flags);
2673 if (!waitqueue_active(&info->event_wait_q)) {
2674 /* disable enable exit hunt mode/idle rcvd IRQs */
2675 wr_reg16(info, SCR,
2676 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2678 spin_unlock_irqrestore(&info->lock,flags);
2680 exit:
2681 if (rc == 0)
2682 rc = put_user(events, mask_ptr);
2683 return rc;
2686 static int get_interface(struct slgt_info *info, int __user *if_mode)
2688 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2689 if (put_user(info->if_mode, if_mode))
2690 return -EFAULT;
2691 return 0;
2694 static int set_interface(struct slgt_info *info, int if_mode)
2696 unsigned long flags;
2697 unsigned short val;
2699 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2700 spin_lock_irqsave(&info->lock,flags);
2701 info->if_mode = if_mode;
2703 msc_set_vcr(info);
2705 /* TCR (tx control) 07 1=RTS driver control */
2706 val = rd_reg16(info, TCR);
2707 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2708 val |= BIT7;
2709 else
2710 val &= ~BIT7;
2711 wr_reg16(info, TCR, val);
2713 spin_unlock_irqrestore(&info->lock,flags);
2714 return 0;
2718 * set general purpose IO pin state and direction
2720 * user_gpio fields:
2721 * state each bit indicates a pin state
2722 * smask set bit indicates pin state to set
2723 * dir each bit indicates a pin direction (0=input, 1=output)
2724 * dmask set bit indicates pin direction to set
2726 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2728 unsigned long flags;
2729 struct gpio_desc gpio;
2730 __u32 data;
2732 if (!info->gpio_present)
2733 return -EINVAL;
2734 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2735 return -EFAULT;
2736 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2737 info->device_name, gpio.state, gpio.smask,
2738 gpio.dir, gpio.dmask));
2740 spin_lock_irqsave(&info->lock,flags);
2741 if (gpio.dmask) {
2742 data = rd_reg32(info, IODR);
2743 data |= gpio.dmask & gpio.dir;
2744 data &= ~(gpio.dmask & ~gpio.dir);
2745 wr_reg32(info, IODR, data);
2747 if (gpio.smask) {
2748 data = rd_reg32(info, IOVR);
2749 data |= gpio.smask & gpio.state;
2750 data &= ~(gpio.smask & ~gpio.state);
2751 wr_reg32(info, IOVR, data);
2753 spin_unlock_irqrestore(&info->lock,flags);
2755 return 0;
2759 * get general purpose IO pin state and direction
2761 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2763 struct gpio_desc gpio;
2764 if (!info->gpio_present)
2765 return -EINVAL;
2766 gpio.state = rd_reg32(info, IOVR);
2767 gpio.smask = 0xffffffff;
2768 gpio.dir = rd_reg32(info, IODR);
2769 gpio.dmask = 0xffffffff;
2770 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2771 return -EFAULT;
2772 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2773 info->device_name, gpio.state, gpio.dir));
2774 return 0;
2778 * conditional wait facility
2780 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2782 init_waitqueue_head(&w->q);
2783 init_waitqueue_entry(&w->wait, current);
2784 w->data = data;
2787 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2789 set_current_state(TASK_INTERRUPTIBLE);
2790 add_wait_queue(&w->q, &w->wait);
2791 w->next = *head;
2792 *head = w;
2795 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2797 struct cond_wait *w, *prev;
2798 remove_wait_queue(&cw->q, &cw->wait);
2799 set_current_state(TASK_RUNNING);
2800 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2801 if (w == cw) {
2802 if (prev != NULL)
2803 prev->next = w->next;
2804 else
2805 *head = w->next;
2806 break;
2811 static void flush_cond_wait(struct cond_wait **head)
2813 while (*head != NULL) {
2814 wake_up_interruptible(&(*head)->q);
2815 *head = (*head)->next;
2820 * wait for general purpose I/O pin(s) to enter specified state
2822 * user_gpio fields:
2823 * state - bit indicates target pin state
2824 * smask - set bit indicates watched pin
2826 * The wait ends when at least one watched pin enters the specified
2827 * state. When 0 (no error) is returned, user_gpio->state is set to the
2828 * state of all GPIO pins when the wait ends.
2830 * Note: Each pin may be a dedicated input, dedicated output, or
2831 * configurable input/output. The number and configuration of pins
2832 * varies with the specific adapter model. Only input pins (dedicated
2833 * or configured) can be monitored with this function.
2835 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2837 unsigned long flags;
2838 int rc = 0;
2839 struct gpio_desc gpio;
2840 struct cond_wait wait;
2841 u32 state;
2843 if (!info->gpio_present)
2844 return -EINVAL;
2845 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2846 return -EFAULT;
2847 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2848 info->device_name, gpio.state, gpio.smask));
2849 /* ignore output pins identified by set IODR bit */
2850 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2851 return -EINVAL;
2852 init_cond_wait(&wait, gpio.smask);
2854 spin_lock_irqsave(&info->lock, flags);
2855 /* enable interrupts for watched pins */
2856 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2857 /* get current pin states */
2858 state = rd_reg32(info, IOVR);
2860 if (gpio.smask & ~(state ^ gpio.state)) {
2861 /* already in target state */
2862 gpio.state = state;
2863 } else {
2864 /* wait for target state */
2865 add_cond_wait(&info->gpio_wait_q, &wait);
2866 spin_unlock_irqrestore(&info->lock, flags);
2867 schedule();
2868 if (signal_pending(current))
2869 rc = -ERESTARTSYS;
2870 else
2871 gpio.state = wait.data;
2872 spin_lock_irqsave(&info->lock, flags);
2873 remove_cond_wait(&info->gpio_wait_q, &wait);
2876 /* disable all GPIO interrupts if no waiting processes */
2877 if (info->gpio_wait_q == NULL)
2878 wr_reg32(info, IOER, 0);
2879 spin_unlock_irqrestore(&info->lock,flags);
2881 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2882 rc = -EFAULT;
2883 return rc;
2886 static int modem_input_wait(struct slgt_info *info,int arg)
2888 unsigned long flags;
2889 int rc;
2890 struct mgsl_icount cprev, cnow;
2891 DECLARE_WAITQUEUE(wait, current);
2893 /* save current irq counts */
2894 spin_lock_irqsave(&info->lock,flags);
2895 cprev = info->icount;
2896 add_wait_queue(&info->status_event_wait_q, &wait);
2897 set_current_state(TASK_INTERRUPTIBLE);
2898 spin_unlock_irqrestore(&info->lock,flags);
2900 for(;;) {
2901 schedule();
2902 if (signal_pending(current)) {
2903 rc = -ERESTARTSYS;
2904 break;
2907 /* get new irq counts */
2908 spin_lock_irqsave(&info->lock,flags);
2909 cnow = info->icount;
2910 set_current_state(TASK_INTERRUPTIBLE);
2911 spin_unlock_irqrestore(&info->lock,flags);
2913 /* if no change, wait aborted for some reason */
2914 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2915 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2916 rc = -EIO;
2917 break;
2920 /* check for change in caller specified modem input */
2921 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2922 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2923 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2924 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2925 rc = 0;
2926 break;
2929 cprev = cnow;
2931 remove_wait_queue(&info->status_event_wait_q, &wait);
2932 set_current_state(TASK_RUNNING);
2933 return rc;
2937 * return state of serial control and status signals
2939 static int tiocmget(struct tty_struct *tty, struct file *file)
2941 struct slgt_info *info = tty->driver_data;
2942 unsigned int result;
2943 unsigned long flags;
2945 spin_lock_irqsave(&info->lock,flags);
2946 get_signals(info);
2947 spin_unlock_irqrestore(&info->lock,flags);
2949 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2950 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2951 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2952 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2953 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2954 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2956 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
2957 return result;
2961 * set modem control signals (DTR/RTS)
2963 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
2964 * TIOCMSET = set/clear signal values
2965 * value bit mask for command
2967 static int tiocmset(struct tty_struct *tty, struct file *file,
2968 unsigned int set, unsigned int clear)
2970 struct slgt_info *info = tty->driver_data;
2971 unsigned long flags;
2973 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
2975 if (set & TIOCM_RTS)
2976 info->signals |= SerialSignal_RTS;
2977 if (set & TIOCM_DTR)
2978 info->signals |= SerialSignal_DTR;
2979 if (clear & TIOCM_RTS)
2980 info->signals &= ~SerialSignal_RTS;
2981 if (clear & TIOCM_DTR)
2982 info->signals &= ~SerialSignal_DTR;
2984 spin_lock_irqsave(&info->lock,flags);
2985 set_signals(info);
2986 spin_unlock_irqrestore(&info->lock,flags);
2987 return 0;
2991 * block current process until the device is ready to open
2993 static int block_til_ready(struct tty_struct *tty, struct file *filp,
2994 struct slgt_info *info)
2996 DECLARE_WAITQUEUE(wait, current);
2997 int retval;
2998 int do_clocal = 0, extra_count = 0;
2999 unsigned long flags;
3001 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3003 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3004 /* nonblock mode is set or port is not enabled */
3005 info->flags |= ASYNC_NORMAL_ACTIVE;
3006 return 0;
3009 if (tty->termios->c_cflag & CLOCAL)
3010 do_clocal = 1;
3012 /* Wait for carrier detect and the line to become
3013 * free (i.e., not in use by the callout). While we are in
3014 * this loop, info->count is dropped by one, so that
3015 * close() knows when to free things. We restore it upon
3016 * exit, either normal or abnormal.
3019 retval = 0;
3020 add_wait_queue(&info->open_wait, &wait);
3022 spin_lock_irqsave(&info->lock, flags);
3023 if (!tty_hung_up_p(filp)) {
3024 extra_count = 1;
3025 info->count--;
3027 spin_unlock_irqrestore(&info->lock, flags);
3028 info->blocked_open++;
3030 while (1) {
3031 if ((tty->termios->c_cflag & CBAUD)) {
3032 spin_lock_irqsave(&info->lock,flags);
3033 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3034 set_signals(info);
3035 spin_unlock_irqrestore(&info->lock,flags);
3038 set_current_state(TASK_INTERRUPTIBLE);
3040 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3041 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3042 -EAGAIN : -ERESTARTSYS;
3043 break;
3046 spin_lock_irqsave(&info->lock,flags);
3047 get_signals(info);
3048 spin_unlock_irqrestore(&info->lock,flags);
3050 if (!(info->flags & ASYNC_CLOSING) &&
3051 (do_clocal || (info->signals & SerialSignal_DCD)) ) {
3052 break;
3055 if (signal_pending(current)) {
3056 retval = -ERESTARTSYS;
3057 break;
3060 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3061 schedule();
3064 set_current_state(TASK_RUNNING);
3065 remove_wait_queue(&info->open_wait, &wait);
3067 if (extra_count)
3068 info->count++;
3069 info->blocked_open--;
3071 if (!retval)
3072 info->flags |= ASYNC_NORMAL_ACTIVE;
3074 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3075 return retval;
3078 static int alloc_tmp_rbuf(struct slgt_info *info)
3080 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3081 if (info->tmp_rbuf == NULL)
3082 return -ENOMEM;
3083 return 0;
3086 static void free_tmp_rbuf(struct slgt_info *info)
3088 kfree(info->tmp_rbuf);
3089 info->tmp_rbuf = NULL;
3093 * allocate DMA descriptor lists.
3095 static int alloc_desc(struct slgt_info *info)
3097 unsigned int i;
3098 unsigned int pbufs;
3100 /* allocate memory to hold descriptor lists */
3101 info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3102 if (info->bufs == NULL)
3103 return -ENOMEM;
3105 memset(info->bufs, 0, DESC_LIST_SIZE);
3107 info->rbufs = (struct slgt_desc*)info->bufs;
3108 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3110 pbufs = (unsigned int)info->bufs_dma_addr;
3113 * Build circular lists of descriptors
3116 for (i=0; i < info->rbuf_count; i++) {
3117 /* physical address of this descriptor */
3118 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3120 /* physical address of next descriptor */
3121 if (i == info->rbuf_count - 1)
3122 info->rbufs[i].next = cpu_to_le32(pbufs);
3123 else
3124 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3125 set_desc_count(info->rbufs[i], DMABUFSIZE);
3128 for (i=0; i < info->tbuf_count; i++) {
3129 /* physical address of this descriptor */
3130 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3132 /* physical address of next descriptor */
3133 if (i == info->tbuf_count - 1)
3134 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3135 else
3136 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3139 return 0;
3142 static void free_desc(struct slgt_info *info)
3144 if (info->bufs != NULL) {
3145 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3146 info->bufs = NULL;
3147 info->rbufs = NULL;
3148 info->tbufs = NULL;
3152 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3154 int i;
3155 for (i=0; i < count; i++) {
3156 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3157 return -ENOMEM;
3158 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3160 return 0;
3163 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3165 int i;
3166 for (i=0; i < count; i++) {
3167 if (bufs[i].buf == NULL)
3168 continue;
3169 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3170 bufs[i].buf = NULL;
3174 static int alloc_dma_bufs(struct slgt_info *info)
3176 info->rbuf_count = 32;
3177 info->tbuf_count = 32;
3179 if (alloc_desc(info) < 0 ||
3180 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3181 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3182 alloc_tmp_rbuf(info) < 0) {
3183 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3184 return -ENOMEM;
3186 reset_rbufs(info);
3187 return 0;
3190 static void free_dma_bufs(struct slgt_info *info)
3192 if (info->bufs) {
3193 free_bufs(info, info->rbufs, info->rbuf_count);
3194 free_bufs(info, info->tbufs, info->tbuf_count);
3195 free_desc(info);
3197 free_tmp_rbuf(info);
3200 static int claim_resources(struct slgt_info *info)
3202 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3203 DBGERR(("%s reg addr conflict, addr=%08X\n",
3204 info->device_name, info->phys_reg_addr));
3205 info->init_error = DiagStatus_AddressConflict;
3206 goto errout;
3208 else
3209 info->reg_addr_requested = 1;
3211 info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE);
3212 if (!info->reg_addr) {
3213 DBGERR(("%s cant map device registers, addr=%08X\n",
3214 info->device_name, info->phys_reg_addr));
3215 info->init_error = DiagStatus_CantAssignPciResources;
3216 goto errout;
3218 return 0;
3220 errout:
3221 release_resources(info);
3222 return -ENODEV;
3225 static void release_resources(struct slgt_info *info)
3227 if (info->irq_requested) {
3228 free_irq(info->irq_level, info);
3229 info->irq_requested = 0;
3232 if (info->reg_addr_requested) {
3233 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3234 info->reg_addr_requested = 0;
3237 if (info->reg_addr) {
3238 iounmap(info->reg_addr);
3239 info->reg_addr = NULL;
3243 /* Add the specified device instance data structure to the
3244 * global linked list of devices and increment the device count.
3246 static void add_device(struct slgt_info *info)
3248 char *devstr;
3250 info->next_device = NULL;
3251 info->line = slgt_device_count;
3252 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3254 if (info->line < MAX_DEVICES) {
3255 if (maxframe[info->line])
3256 info->max_frame_size = maxframe[info->line];
3257 info->dosyncppp = dosyncppp[info->line];
3260 slgt_device_count++;
3262 if (!slgt_device_list)
3263 slgt_device_list = info;
3264 else {
3265 struct slgt_info *current_dev = slgt_device_list;
3266 while(current_dev->next_device)
3267 current_dev = current_dev->next_device;
3268 current_dev->next_device = info;
3271 if (info->max_frame_size < 4096)
3272 info->max_frame_size = 4096;
3273 else if (info->max_frame_size > 65535)
3274 info->max_frame_size = 65535;
3276 switch(info->pdev->device) {
3277 case SYNCLINK_GT_DEVICE_ID:
3278 devstr = "GT";
3279 break;
3280 case SYNCLINK_GT2_DEVICE_ID:
3281 devstr = "GT2";
3282 break;
3283 case SYNCLINK_GT4_DEVICE_ID:
3284 devstr = "GT4";
3285 break;
3286 case SYNCLINK_AC_DEVICE_ID:
3287 devstr = "AC";
3288 info->params.mode = MGSL_MODE_ASYNC;
3289 break;
3290 default:
3291 devstr = "(unknown model)";
3293 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3294 devstr, info->device_name, info->phys_reg_addr,
3295 info->irq_level, info->max_frame_size);
3297 #ifdef CONFIG_HDLC
3298 hdlcdev_init(info);
3299 #endif
3303 * allocate device instance structure, return NULL on failure
3305 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3307 struct slgt_info *info;
3309 info = kmalloc(sizeof(struct slgt_info), GFP_KERNEL);
3311 if (!info) {
3312 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3313 driver_name, adapter_num, port_num));
3314 } else {
3315 memset(info, 0, sizeof(struct slgt_info));
3316 info->magic = MGSL_MAGIC;
3317 INIT_WORK(&info->task, bh_handler, info);
3318 info->max_frame_size = 4096;
3319 info->raw_rx_size = DMABUFSIZE;
3320 info->close_delay = 5*HZ/10;
3321 info->closing_wait = 30*HZ;
3322 init_waitqueue_head(&info->open_wait);
3323 init_waitqueue_head(&info->close_wait);
3324 init_waitqueue_head(&info->status_event_wait_q);
3325 init_waitqueue_head(&info->event_wait_q);
3326 spin_lock_init(&info->netlock);
3327 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3328 info->idle_mode = HDLC_TXIDLE_FLAGS;
3329 info->adapter_num = adapter_num;
3330 info->port_num = port_num;
3332 init_timer(&info->tx_timer);
3333 info->tx_timer.data = (unsigned long)info;
3334 info->tx_timer.function = tx_timeout;
3336 init_timer(&info->rx_timer);
3337 info->rx_timer.data = (unsigned long)info;
3338 info->rx_timer.function = rx_timeout;
3340 /* Copy configuration info to device instance data */
3341 info->pdev = pdev;
3342 info->irq_level = pdev->irq;
3343 info->phys_reg_addr = pci_resource_start(pdev,0);
3345 info->bus_type = MGSL_BUS_TYPE_PCI;
3346 info->irq_flags = IRQF_SHARED;
3348 info->init_error = -1; /* assume error, set to 0 on successful init */
3351 return info;
3354 static void device_init(int adapter_num, struct pci_dev *pdev)
3356 struct slgt_info *port_array[SLGT_MAX_PORTS];
3357 int i;
3358 int port_count = 1;
3360 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3361 port_count = 2;
3362 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3363 port_count = 4;
3365 /* allocate device instances for all ports */
3366 for (i=0; i < port_count; ++i) {
3367 port_array[i] = alloc_dev(adapter_num, i, pdev);
3368 if (port_array[i] == NULL) {
3369 for (--i; i >= 0; --i)
3370 kfree(port_array[i]);
3371 return;
3375 /* give copy of port_array to all ports and add to device list */
3376 for (i=0; i < port_count; ++i) {
3377 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3378 add_device(port_array[i]);
3379 port_array[i]->port_count = port_count;
3380 spin_lock_init(&port_array[i]->lock);
3383 /* Allocate and claim adapter resources */
3384 if (!claim_resources(port_array[0])) {
3386 alloc_dma_bufs(port_array[0]);
3388 /* copy resource information from first port to others */
3389 for (i = 1; i < port_count; ++i) {
3390 port_array[i]->lock = port_array[0]->lock;
3391 port_array[i]->irq_level = port_array[0]->irq_level;
3392 port_array[i]->reg_addr = port_array[0]->reg_addr;
3393 alloc_dma_bufs(port_array[i]);
3396 if (request_irq(port_array[0]->irq_level,
3397 slgt_interrupt,
3398 port_array[0]->irq_flags,
3399 port_array[0]->device_name,
3400 port_array[0]) < 0) {
3401 DBGERR(("%s request_irq failed IRQ=%d\n",
3402 port_array[0]->device_name,
3403 port_array[0]->irq_level));
3404 } else {
3405 port_array[0]->irq_requested = 1;
3406 adapter_test(port_array[0]);
3407 for (i=1 ; i < port_count ; i++) {
3408 port_array[i]->init_error = port_array[0]->init_error;
3409 port_array[i]->gpio_present = port_array[0]->gpio_present;
3415 static int __devinit init_one(struct pci_dev *dev,
3416 const struct pci_device_id *ent)
3418 if (pci_enable_device(dev)) {
3419 printk("error enabling pci device %p\n", dev);
3420 return -EIO;
3422 pci_set_master(dev);
3423 device_init(slgt_device_count, dev);
3424 return 0;
3427 static void __devexit remove_one(struct pci_dev *dev)
3431 static struct tty_operations ops = {
3432 .open = open,
3433 .close = close,
3434 .write = write,
3435 .put_char = put_char,
3436 .flush_chars = flush_chars,
3437 .write_room = write_room,
3438 .chars_in_buffer = chars_in_buffer,
3439 .flush_buffer = flush_buffer,
3440 .ioctl = ioctl,
3441 .throttle = throttle,
3442 .unthrottle = unthrottle,
3443 .send_xchar = send_xchar,
3444 .break_ctl = set_break,
3445 .wait_until_sent = wait_until_sent,
3446 .read_proc = read_proc,
3447 .set_termios = set_termios,
3448 .stop = tx_hold,
3449 .start = tx_release,
3450 .hangup = hangup,
3451 .tiocmget = tiocmget,
3452 .tiocmset = tiocmset,
3455 static void slgt_cleanup(void)
3457 int rc;
3458 struct slgt_info *info;
3459 struct slgt_info *tmp;
3461 printk("unload %s %s\n", driver_name, driver_version);
3463 if (serial_driver) {
3464 if ((rc = tty_unregister_driver(serial_driver)))
3465 DBGERR(("tty_unregister_driver error=%d\n", rc));
3466 put_tty_driver(serial_driver);
3469 /* reset devices */
3470 info = slgt_device_list;
3471 while(info) {
3472 reset_port(info);
3473 info = info->next_device;
3476 /* release devices */
3477 info = slgt_device_list;
3478 while(info) {
3479 #ifdef CONFIG_HDLC
3480 hdlcdev_exit(info);
3481 #endif
3482 free_dma_bufs(info);
3483 free_tmp_rbuf(info);
3484 if (info->port_num == 0)
3485 release_resources(info);
3486 tmp = info;
3487 info = info->next_device;
3488 kfree(tmp);
3491 if (pci_registered)
3492 pci_unregister_driver(&pci_driver);
3496 * Driver initialization entry point.
3498 static int __init slgt_init(void)
3500 int rc;
3502 printk("%s %s\n", driver_name, driver_version);
3504 slgt_device_count = 0;
3505 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3506 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3507 return rc;
3509 pci_registered = 1;
3511 if (!slgt_device_list) {
3512 printk("%s no devices found\n",driver_name);
3513 return -ENODEV;
3516 serial_driver = alloc_tty_driver(MAX_DEVICES);
3517 if (!serial_driver) {
3518 rc = -ENOMEM;
3519 goto error;
3522 /* Initialize the tty_driver structure */
3524 serial_driver->owner = THIS_MODULE;
3525 serial_driver->driver_name = tty_driver_name;
3526 serial_driver->name = tty_dev_prefix;
3527 serial_driver->major = ttymajor;
3528 serial_driver->minor_start = 64;
3529 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3530 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3531 serial_driver->init_termios = tty_std_termios;
3532 serial_driver->init_termios.c_cflag =
3533 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3534 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3535 tty_set_operations(serial_driver, &ops);
3536 if ((rc = tty_register_driver(serial_driver)) < 0) {
3537 DBGERR(("%s can't register serial driver\n", driver_name));
3538 put_tty_driver(serial_driver);
3539 serial_driver = NULL;
3540 goto error;
3543 printk("%s %s, tty major#%d\n",
3544 driver_name, driver_version,
3545 serial_driver->major);
3547 return 0;
3549 error:
3550 slgt_cleanup();
3551 return rc;
3554 static void __exit slgt_exit(void)
3556 slgt_cleanup();
3559 module_init(slgt_init);
3560 module_exit(slgt_exit);
3563 * register access routines
3566 #define CALC_REGADDR() \
3567 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3568 if (addr >= 0x80) \
3569 reg_addr += (info->port_num) * 32;
3571 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3573 CALC_REGADDR();
3574 return readb((void __iomem *)reg_addr);
3577 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3579 CALC_REGADDR();
3580 writeb(value, (void __iomem *)reg_addr);
3583 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3585 CALC_REGADDR();
3586 return readw((void __iomem *)reg_addr);
3589 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3591 CALC_REGADDR();
3592 writew(value, (void __iomem *)reg_addr);
3595 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3597 CALC_REGADDR();
3598 return readl((void __iomem *)reg_addr);
3601 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3603 CALC_REGADDR();
3604 writel(value, (void __iomem *)reg_addr);
3607 static void rdma_reset(struct slgt_info *info)
3609 unsigned int i;
3611 /* set reset bit */
3612 wr_reg32(info, RDCSR, BIT1);
3614 /* wait for enable bit cleared */
3615 for(i=0 ; i < 1000 ; i++)
3616 if (!(rd_reg32(info, RDCSR) & BIT0))
3617 break;
3620 static void tdma_reset(struct slgt_info *info)
3622 unsigned int i;
3624 /* set reset bit */
3625 wr_reg32(info, TDCSR, BIT1);
3627 /* wait for enable bit cleared */
3628 for(i=0 ; i < 1000 ; i++)
3629 if (!(rd_reg32(info, TDCSR) & BIT0))
3630 break;
3634 * enable internal loopback
3635 * TxCLK and RxCLK are generated from BRG
3636 * and TxD is looped back to RxD internally.
3638 static void enable_loopback(struct slgt_info *info)
3640 /* SCR (serial control) BIT2=looopback enable */
3641 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3643 if (info->params.mode != MGSL_MODE_ASYNC) {
3644 /* CCR (clock control)
3645 * 07..05 tx clock source (010 = BRG)
3646 * 04..02 rx clock source (010 = BRG)
3647 * 01 auxclk enable (0 = disable)
3648 * 00 BRG enable (1 = enable)
3650 * 0100 1001
3652 wr_reg8(info, CCR, 0x49);
3654 /* set speed if available, otherwise use default */
3655 if (info->params.clock_speed)
3656 set_rate(info, info->params.clock_speed);
3657 else
3658 set_rate(info, 3686400);
3663 * set baud rate generator to specified rate
3665 static void set_rate(struct slgt_info *info, u32 rate)
3667 unsigned int div;
3668 static unsigned int osc = 14745600;
3670 /* div = osc/rate - 1
3672 * Round div up if osc/rate is not integer to
3673 * force to next slowest rate.
3676 if (rate) {
3677 div = osc/rate;
3678 if (!(osc % rate) && div)
3679 div--;
3680 wr_reg16(info, BDR, (unsigned short)div);
3684 static void rx_stop(struct slgt_info *info)
3686 unsigned short val;
3688 /* disable and reset receiver */
3689 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3690 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3691 wr_reg16(info, RCR, val); /* clear reset bit */
3693 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3695 /* clear pending rx interrupts */
3696 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3698 rdma_reset(info);
3700 info->rx_enabled = 0;
3701 info->rx_restart = 0;
3704 static void rx_start(struct slgt_info *info)
3706 unsigned short val;
3708 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3710 /* clear pending rx overrun IRQ */
3711 wr_reg16(info, SSR, IRQ_RXOVER);
3713 /* reset and disable receiver */
3714 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3715 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3716 wr_reg16(info, RCR, val); /* clear reset bit */
3718 rdma_reset(info);
3719 reset_rbufs(info);
3721 /* set 1st descriptor address */
3722 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3724 if (info->params.mode != MGSL_MODE_ASYNC) {
3725 /* enable rx DMA and DMA interrupt */
3726 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3727 } else {
3728 /* enable saving of rx status, rx DMA and DMA interrupt */
3729 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3732 slgt_irq_on(info, IRQ_RXOVER);
3734 /* enable receiver */
3735 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3737 info->rx_restart = 0;
3738 info->rx_enabled = 1;
3741 static void tx_start(struct slgt_info *info)
3743 if (!info->tx_enabled) {
3744 wr_reg16(info, TCR,
3745 (unsigned short)(rd_reg16(info, TCR) | BIT1));
3746 info->tx_enabled = TRUE;
3749 if (info->tx_count) {
3750 info->drop_rts_on_tx_done = 0;
3752 if (info->params.mode != MGSL_MODE_ASYNC) {
3753 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3754 get_signals(info);
3755 if (!(info->signals & SerialSignal_RTS)) {
3756 info->signals |= SerialSignal_RTS;
3757 set_signals(info);
3758 info->drop_rts_on_tx_done = 1;
3762 slgt_irq_off(info, IRQ_TXDATA);
3763 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3764 /* clear tx idle and underrun status bits */
3765 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3767 if (!(rd_reg32(info, TDCSR) & BIT0)) {
3768 /* tx DMA stopped, restart tx DMA */
3769 tdma_reset(info);
3770 /* set 1st descriptor address */
3771 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3772 if (info->params.mode == MGSL_MODE_RAW)
3773 wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3774 else
3775 wr_reg32(info, TDCSR, BIT0); /* DMA enable */
3778 if (info->params.mode != MGSL_MODE_RAW) {
3779 info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
3780 add_timer(&info->tx_timer);
3782 } else {
3783 tdma_reset(info);
3784 /* set 1st descriptor address */
3785 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3787 slgt_irq_off(info, IRQ_TXDATA);
3788 slgt_irq_on(info, IRQ_TXIDLE);
3789 /* clear tx idle status bit */
3790 wr_reg16(info, SSR, IRQ_TXIDLE);
3792 /* enable tx DMA */
3793 wr_reg32(info, TDCSR, BIT0);
3796 info->tx_active = 1;
3800 static void tx_stop(struct slgt_info *info)
3802 unsigned short val;
3804 del_timer(&info->tx_timer);
3806 tdma_reset(info);
3808 /* reset and disable transmitter */
3809 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
3810 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3811 wr_reg16(info, TCR, val); /* clear reset */
3813 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3815 /* clear tx idle and underrun status bit */
3816 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3818 reset_tbufs(info);
3820 info->tx_enabled = 0;
3821 info->tx_active = 0;
3824 static void reset_port(struct slgt_info *info)
3826 if (!info->reg_addr)
3827 return;
3829 tx_stop(info);
3830 rx_stop(info);
3832 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3833 set_signals(info);
3835 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3838 static void reset_adapter(struct slgt_info *info)
3840 int i;
3841 for (i=0; i < info->port_count; ++i) {
3842 if (info->port_array[i])
3843 reset_port(info->port_array[i]);
3847 static void async_mode(struct slgt_info *info)
3849 unsigned short val;
3851 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3852 tx_stop(info);
3853 rx_stop(info);
3855 /* TCR (tx control)
3857 * 15..13 mode, 010=async
3858 * 12..10 encoding, 000=NRZ
3859 * 09 parity enable
3860 * 08 1=odd parity, 0=even parity
3861 * 07 1=RTS driver control
3862 * 06 1=break enable
3863 * 05..04 character length
3864 * 00=5 bits
3865 * 01=6 bits
3866 * 10=7 bits
3867 * 11=8 bits
3868 * 03 0=1 stop bit, 1=2 stop bits
3869 * 02 reset
3870 * 01 enable
3871 * 00 auto-CTS enable
3873 val = 0x4000;
3875 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
3876 val |= BIT7;
3878 if (info->params.parity != ASYNC_PARITY_NONE) {
3879 val |= BIT9;
3880 if (info->params.parity == ASYNC_PARITY_ODD)
3881 val |= BIT8;
3884 switch (info->params.data_bits)
3886 case 6: val |= BIT4; break;
3887 case 7: val |= BIT5; break;
3888 case 8: val |= BIT5 + BIT4; break;
3891 if (info->params.stop_bits != 1)
3892 val |= BIT3;
3894 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3895 val |= BIT0;
3897 wr_reg16(info, TCR, val);
3899 /* RCR (rx control)
3901 * 15..13 mode, 010=async
3902 * 12..10 encoding, 000=NRZ
3903 * 09 parity enable
3904 * 08 1=odd parity, 0=even parity
3905 * 07..06 reserved, must be 0
3906 * 05..04 character length
3907 * 00=5 bits
3908 * 01=6 bits
3909 * 10=7 bits
3910 * 11=8 bits
3911 * 03 reserved, must be zero
3912 * 02 reset
3913 * 01 enable
3914 * 00 auto-DCD enable
3916 val = 0x4000;
3918 if (info->params.parity != ASYNC_PARITY_NONE) {
3919 val |= BIT9;
3920 if (info->params.parity == ASYNC_PARITY_ODD)
3921 val |= BIT8;
3924 switch (info->params.data_bits)
3926 case 6: val |= BIT4; break;
3927 case 7: val |= BIT5; break;
3928 case 8: val |= BIT5 + BIT4; break;
3931 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3932 val |= BIT0;
3934 wr_reg16(info, RCR, val);
3936 /* CCR (clock control)
3938 * 07..05 011 = tx clock source is BRG/16
3939 * 04..02 010 = rx clock source is BRG
3940 * 01 0 = auxclk disabled
3941 * 00 1 = BRG enabled
3943 * 0110 1001
3945 wr_reg8(info, CCR, 0x69);
3947 msc_set_vcr(info);
3949 /* SCR (serial control)
3951 * 15 1=tx req on FIFO half empty
3952 * 14 1=rx req on FIFO half full
3953 * 13 tx data IRQ enable
3954 * 12 tx idle IRQ enable
3955 * 11 rx break on IRQ enable
3956 * 10 rx data IRQ enable
3957 * 09 rx break off IRQ enable
3958 * 08 overrun IRQ enable
3959 * 07 DSR IRQ enable
3960 * 06 CTS IRQ enable
3961 * 05 DCD IRQ enable
3962 * 04 RI IRQ enable
3963 * 03 reserved, must be zero
3964 * 02 1=txd->rxd internal loopback enable
3965 * 01 reserved, must be zero
3966 * 00 1=master IRQ enable
3968 val = BIT15 + BIT14 + BIT0;
3969 wr_reg16(info, SCR, val);
3971 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
3973 set_rate(info, info->params.data_rate * 16);
3975 if (info->params.loopback)
3976 enable_loopback(info);
3979 static void hdlc_mode(struct slgt_info *info)
3981 unsigned short val;
3983 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3984 tx_stop(info);
3985 rx_stop(info);
3987 /* TCR (tx control)
3989 * 15..13 mode, 000=HDLC 001=raw sync
3990 * 12..10 encoding
3991 * 09 CRC enable
3992 * 08 CRC32
3993 * 07 1=RTS driver control
3994 * 06 preamble enable
3995 * 05..04 preamble length
3996 * 03 share open/close flag
3997 * 02 reset
3998 * 01 enable
3999 * 00 auto-CTS enable
4001 val = 0;
4003 if (info->params.mode == MGSL_MODE_RAW)
4004 val |= BIT13;
4005 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4006 val |= BIT7;
4008 switch(info->params.encoding)
4010 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4011 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4012 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4013 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4014 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4015 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4016 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4019 switch (info->params.crc_type & HDLC_CRC_MASK)
4021 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4022 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4025 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4026 val |= BIT6;
4028 switch (info->params.preamble_length)
4030 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4031 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4032 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4035 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4036 val |= BIT0;
4038 wr_reg16(info, TCR, val);
4040 /* TPR (transmit preamble) */
4042 switch (info->params.preamble)
4044 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4045 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4046 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4047 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4048 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4049 default: val = 0x7e; break;
4051 wr_reg8(info, TPR, (unsigned char)val);
4053 /* RCR (rx control)
4055 * 15..13 mode, 000=HDLC 001=raw sync
4056 * 12..10 encoding
4057 * 09 CRC enable
4058 * 08 CRC32
4059 * 07..03 reserved, must be 0
4060 * 02 reset
4061 * 01 enable
4062 * 00 auto-DCD enable
4064 val = 0;
4066 if (info->params.mode == MGSL_MODE_RAW)
4067 val |= BIT13;
4069 switch(info->params.encoding)
4071 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4072 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4073 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4074 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4075 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4076 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4077 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4080 switch (info->params.crc_type & HDLC_CRC_MASK)
4082 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4083 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4086 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4087 val |= BIT0;
4089 wr_reg16(info, RCR, val);
4091 /* CCR (clock control)
4093 * 07..05 tx clock source
4094 * 04..02 rx clock source
4095 * 01 auxclk enable
4096 * 00 BRG enable
4098 val = 0;
4100 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4102 // when RxC source is DPLL, BRG generates 16X DPLL
4103 // reference clock, so take TxC from BRG/16 to get
4104 // transmit clock at actual data rate
4105 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4106 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4107 else
4108 val |= BIT6; /* 010, txclk = BRG */
4110 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4111 val |= BIT7; /* 100, txclk = DPLL Input */
4112 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4113 val |= BIT5; /* 001, txclk = RXC Input */
4115 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4116 val |= BIT3; /* 010, rxclk = BRG */
4117 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4118 val |= BIT4; /* 100, rxclk = DPLL */
4119 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4120 val |= BIT2; /* 001, rxclk = TXC Input */
4122 if (info->params.clock_speed)
4123 val |= BIT1 + BIT0;
4125 wr_reg8(info, CCR, (unsigned char)val);
4127 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4129 // program DPLL mode
4130 switch(info->params.encoding)
4132 case HDLC_ENCODING_BIPHASE_MARK:
4133 case HDLC_ENCODING_BIPHASE_SPACE:
4134 val = BIT7; break;
4135 case HDLC_ENCODING_BIPHASE_LEVEL:
4136 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4137 val = BIT7 + BIT6; break;
4138 default: val = BIT6; // NRZ encodings
4140 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4142 // DPLL requires a 16X reference clock from BRG
4143 set_rate(info, info->params.clock_speed * 16);
4145 else
4146 set_rate(info, info->params.clock_speed);
4148 tx_set_idle(info);
4150 msc_set_vcr(info);
4152 /* SCR (serial control)
4154 * 15 1=tx req on FIFO half empty
4155 * 14 1=rx req on FIFO half full
4156 * 13 tx data IRQ enable
4157 * 12 tx idle IRQ enable
4158 * 11 underrun IRQ enable
4159 * 10 rx data IRQ enable
4160 * 09 rx idle IRQ enable
4161 * 08 overrun IRQ enable
4162 * 07 DSR IRQ enable
4163 * 06 CTS IRQ enable
4164 * 05 DCD IRQ enable
4165 * 04 RI IRQ enable
4166 * 03 reserved, must be zero
4167 * 02 1=txd->rxd internal loopback enable
4168 * 01 reserved, must be zero
4169 * 00 1=master IRQ enable
4171 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4173 if (info->params.loopback)
4174 enable_loopback(info);
4178 * set transmit idle mode
4180 static void tx_set_idle(struct slgt_info *info)
4182 unsigned char val;
4183 unsigned short tcr;
4185 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4186 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4188 tcr = rd_reg16(info, TCR);
4189 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4190 /* disable preamble, set idle size to 16 bits */
4191 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4192 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4193 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4194 } else if (!(tcr & BIT6)) {
4195 /* preamble is disabled, set idle size to 8 bits */
4196 tcr &= ~(BIT5 + BIT4);
4198 wr_reg16(info, TCR, tcr);
4200 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4201 /* LSB of custom tx idle specified in tx idle register */
4202 val = (unsigned char)(info->idle_mode & 0xff);
4203 } else {
4204 /* standard 8 bit idle patterns */
4205 switch(info->idle_mode)
4207 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4208 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4209 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4210 case HDLC_TXIDLE_ZEROS:
4211 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4212 default: val = 0xff;
4216 wr_reg8(info, TIR, val);
4220 * get state of V24 status (input) signals
4222 static void get_signals(struct slgt_info *info)
4224 unsigned short status = rd_reg16(info, SSR);
4226 /* clear all serial signals except DTR and RTS */
4227 info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4229 if (status & BIT3)
4230 info->signals |= SerialSignal_DSR;
4231 if (status & BIT2)
4232 info->signals |= SerialSignal_CTS;
4233 if (status & BIT1)
4234 info->signals |= SerialSignal_DCD;
4235 if (status & BIT0)
4236 info->signals |= SerialSignal_RI;
4240 * set V.24 Control Register based on current configuration
4242 static void msc_set_vcr(struct slgt_info *info)
4244 unsigned char val = 0;
4246 /* VCR (V.24 control)
4248 * 07..04 serial IF select
4249 * 03 DTR
4250 * 02 RTS
4251 * 01 LL
4252 * 00 RL
4255 switch(info->if_mode & MGSL_INTERFACE_MASK)
4257 case MGSL_INTERFACE_RS232:
4258 val |= BIT5; /* 0010 */
4259 break;
4260 case MGSL_INTERFACE_V35:
4261 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4262 break;
4263 case MGSL_INTERFACE_RS422:
4264 val |= BIT6; /* 0100 */
4265 break;
4268 if (info->signals & SerialSignal_DTR)
4269 val |= BIT3;
4270 if (info->signals & SerialSignal_RTS)
4271 val |= BIT2;
4272 if (info->if_mode & MGSL_INTERFACE_LL)
4273 val |= BIT1;
4274 if (info->if_mode & MGSL_INTERFACE_RL)
4275 val |= BIT0;
4276 wr_reg8(info, VCR, val);
4280 * set state of V24 control (output) signals
4282 static void set_signals(struct slgt_info *info)
4284 unsigned char val = rd_reg8(info, VCR);
4285 if (info->signals & SerialSignal_DTR)
4286 val |= BIT3;
4287 else
4288 val &= ~BIT3;
4289 if (info->signals & SerialSignal_RTS)
4290 val |= BIT2;
4291 else
4292 val &= ~BIT2;
4293 wr_reg8(info, VCR, val);
4297 * free range of receive DMA buffers (i to last)
4299 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4301 int done = 0;
4303 while(!done) {
4304 /* reset current buffer for reuse */
4305 info->rbufs[i].status = 0;
4306 if (info->params.mode == MGSL_MODE_RAW)
4307 set_desc_count(info->rbufs[i], info->raw_rx_size);
4308 else
4309 set_desc_count(info->rbufs[i], DMABUFSIZE);
4311 if (i == last)
4312 done = 1;
4313 if (++i == info->rbuf_count)
4314 i = 0;
4316 info->rbuf_current = i;
4320 * mark all receive DMA buffers as free
4322 static void reset_rbufs(struct slgt_info *info)
4324 free_rbufs(info, 0, info->rbuf_count - 1);
4328 * pass receive HDLC frame to upper layer
4330 * return 1 if frame available, otherwise 0
4332 static int rx_get_frame(struct slgt_info *info)
4334 unsigned int start, end;
4335 unsigned short status;
4336 unsigned int framesize = 0;
4337 int rc = 0;
4338 unsigned long flags;
4339 struct tty_struct *tty = info->tty;
4340 unsigned char addr_field = 0xff;
4341 unsigned int crc_size = 0;
4343 switch (info->params.crc_type & HDLC_CRC_MASK) {
4344 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4345 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4348 check_again:
4350 framesize = 0;
4351 addr_field = 0xff;
4352 start = end = info->rbuf_current;
4354 for (;;) {
4355 if (!desc_complete(info->rbufs[end]))
4356 goto cleanup;
4358 if (framesize == 0 && info->params.addr_filter != 0xff)
4359 addr_field = info->rbufs[end].buf[0];
4361 framesize += desc_count(info->rbufs[end]);
4363 if (desc_eof(info->rbufs[end]))
4364 break;
4366 if (++end == info->rbuf_count)
4367 end = 0;
4369 if (end == info->rbuf_current) {
4370 if (info->rx_enabled){
4371 spin_lock_irqsave(&info->lock,flags);
4372 rx_start(info);
4373 spin_unlock_irqrestore(&info->lock,flags);
4375 goto cleanup;
4379 /* status
4381 * 15 buffer complete
4382 * 14..06 reserved
4383 * 05..04 residue
4384 * 02 eof (end of frame)
4385 * 01 CRC error
4386 * 00 abort
4388 status = desc_status(info->rbufs[end]);
4390 /* ignore CRC bit if not using CRC (bit is undefined) */
4391 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4392 status &= ~BIT1;
4394 if (framesize == 0 ||
4395 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4396 free_rbufs(info, start, end);
4397 goto check_again;
4400 if (framesize < (2 + crc_size) || status & BIT0) {
4401 info->icount.rxshort++;
4402 framesize = 0;
4403 } else if (status & BIT1) {
4404 info->icount.rxcrc++;
4405 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4406 framesize = 0;
4409 #ifdef CONFIG_HDLC
4410 if (framesize == 0) {
4411 struct net_device_stats *stats = hdlc_stats(info->netdev);
4412 stats->rx_errors++;
4413 stats->rx_frame_errors++;
4415 #endif
4417 DBGBH(("%s rx frame status=%04X size=%d\n",
4418 info->device_name, status, framesize));
4419 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
4421 if (framesize) {
4422 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4423 framesize -= crc_size;
4424 crc_size = 0;
4427 if (framesize > info->max_frame_size + crc_size)
4428 info->icount.rxlong++;
4429 else {
4430 /* copy dma buffer(s) to contiguous temp buffer */
4431 int copy_count = framesize;
4432 int i = start;
4433 unsigned char *p = info->tmp_rbuf;
4434 info->tmp_rbuf_count = framesize;
4436 info->icount.rxok++;
4438 while(copy_count) {
4439 int partial_count = min(copy_count, DMABUFSIZE);
4440 memcpy(p, info->rbufs[i].buf, partial_count);
4441 p += partial_count;
4442 copy_count -= partial_count;
4443 if (++i == info->rbuf_count)
4444 i = 0;
4447 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4448 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4449 framesize++;
4452 #ifdef CONFIG_HDLC
4453 if (info->netcount)
4454 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4455 else
4456 #endif
4457 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4460 free_rbufs(info, start, end);
4461 rc = 1;
4463 cleanup:
4464 return rc;
4468 * pass receive buffer (RAW synchronous mode) to tty layer
4469 * return 1 if buffer available, otherwise 0
4471 static int rx_get_buf(struct slgt_info *info)
4473 unsigned int i = info->rbuf_current;
4475 if (!desc_complete(info->rbufs[i]))
4476 return 0;
4477 DBGDATA(info, info->rbufs[i].buf, desc_count(info->rbufs[i]), "rx");
4478 DBGINFO(("rx_get_buf size=%d\n", desc_count(info->rbufs[i])));
4479 ldisc_receive_buf(info->tty, info->rbufs[i].buf,
4480 info->flag_buf, desc_count(info->rbufs[i]));
4481 free_rbufs(info, i, i);
4482 return 1;
4485 static void reset_tbufs(struct slgt_info *info)
4487 unsigned int i;
4488 info->tbuf_current = 0;
4489 for (i=0 ; i < info->tbuf_count ; i++) {
4490 info->tbufs[i].status = 0;
4491 info->tbufs[i].count = 0;
4496 * return number of free transmit DMA buffers
4498 static unsigned int free_tbuf_count(struct slgt_info *info)
4500 unsigned int count = 0;
4501 unsigned int i = info->tbuf_current;
4505 if (desc_count(info->tbufs[i]))
4506 break; /* buffer in use */
4507 ++count;
4508 if (++i == info->tbuf_count)
4509 i=0;
4510 } while (i != info->tbuf_current);
4512 /* last buffer with zero count may be in use, assume it is */
4513 if (count)
4514 --count;
4516 return count;
4520 * load transmit DMA buffer(s) with data
4522 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4524 unsigned short count;
4525 unsigned int i;
4526 struct slgt_desc *d;
4528 if (size == 0)
4529 return;
4531 DBGDATA(info, buf, size, "tx");
4533 info->tbuf_start = i = info->tbuf_current;
4535 while (size) {
4536 d = &info->tbufs[i];
4537 if (++i == info->tbuf_count)
4538 i = 0;
4540 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4541 memcpy(d->buf, buf, count);
4543 size -= count;
4544 buf += count;
4546 if (!size && info->params.mode != MGSL_MODE_RAW)
4547 set_desc_eof(*d, 1); /* HDLC: set EOF of last desc */
4548 else
4549 set_desc_eof(*d, 0);
4551 set_desc_count(*d, count);
4554 info->tbuf_current = i;
4557 static int register_test(struct slgt_info *info)
4559 static unsigned short patterns[] =
4560 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4561 static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4562 unsigned int i;
4563 int rc = 0;
4565 for (i=0 ; i < count ; i++) {
4566 wr_reg16(info, TIR, patterns[i]);
4567 wr_reg16(info, BDR, patterns[(i+1)%count]);
4568 if ((rd_reg16(info, TIR) != patterns[i]) ||
4569 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4570 rc = -ENODEV;
4571 break;
4574 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4575 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4576 return rc;
4579 static int irq_test(struct slgt_info *info)
4581 unsigned long timeout;
4582 unsigned long flags;
4583 struct tty_struct *oldtty = info->tty;
4584 u32 speed = info->params.data_rate;
4586 info->params.data_rate = 921600;
4587 info->tty = NULL;
4589 spin_lock_irqsave(&info->lock, flags);
4590 async_mode(info);
4591 slgt_irq_on(info, IRQ_TXIDLE);
4593 /* enable transmitter */
4594 wr_reg16(info, TCR,
4595 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4597 /* write one byte and wait for tx idle */
4598 wr_reg16(info, TDR, 0);
4600 /* assume failure */
4601 info->init_error = DiagStatus_IrqFailure;
4602 info->irq_occurred = FALSE;
4604 spin_unlock_irqrestore(&info->lock, flags);
4606 timeout=100;
4607 while(timeout-- && !info->irq_occurred)
4608 msleep_interruptible(10);
4610 spin_lock_irqsave(&info->lock,flags);
4611 reset_port(info);
4612 spin_unlock_irqrestore(&info->lock,flags);
4614 info->params.data_rate = speed;
4615 info->tty = oldtty;
4617 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4618 return info->irq_occurred ? 0 : -ENODEV;
4621 static int loopback_test_rx(struct slgt_info *info)
4623 unsigned char *src, *dest;
4624 int count;
4626 if (desc_complete(info->rbufs[0])) {
4627 count = desc_count(info->rbufs[0]);
4628 src = info->rbufs[0].buf;
4629 dest = info->tmp_rbuf;
4631 for( ; count ; count-=2, src+=2) {
4632 /* src=data byte (src+1)=status byte */
4633 if (!(*(src+1) & (BIT9 + BIT8))) {
4634 *dest = *src;
4635 dest++;
4636 info->tmp_rbuf_count++;
4639 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4640 return 1;
4642 return 0;
4645 static int loopback_test(struct slgt_info *info)
4647 #define TESTFRAMESIZE 20
4649 unsigned long timeout;
4650 u16 count = TESTFRAMESIZE;
4651 unsigned char buf[TESTFRAMESIZE];
4652 int rc = -ENODEV;
4653 unsigned long flags;
4655 struct tty_struct *oldtty = info->tty;
4656 MGSL_PARAMS params;
4658 memcpy(&params, &info->params, sizeof(params));
4660 info->params.mode = MGSL_MODE_ASYNC;
4661 info->params.data_rate = 921600;
4662 info->params.loopback = 1;
4663 info->tty = NULL;
4665 /* build and send transmit frame */
4666 for (count = 0; count < TESTFRAMESIZE; ++count)
4667 buf[count] = (unsigned char)count;
4669 info->tmp_rbuf_count = 0;
4670 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4672 /* program hardware for HDLC and enabled receiver */
4673 spin_lock_irqsave(&info->lock,flags);
4674 async_mode(info);
4675 rx_start(info);
4676 info->tx_count = count;
4677 tx_load(info, buf, count);
4678 tx_start(info);
4679 spin_unlock_irqrestore(&info->lock, flags);
4681 /* wait for receive complete */
4682 for (timeout = 100; timeout; --timeout) {
4683 msleep_interruptible(10);
4684 if (loopback_test_rx(info)) {
4685 rc = 0;
4686 break;
4690 /* verify received frame length and contents */
4691 if (!rc && (info->tmp_rbuf_count != count ||
4692 memcmp(buf, info->tmp_rbuf, count))) {
4693 rc = -ENODEV;
4696 spin_lock_irqsave(&info->lock,flags);
4697 reset_adapter(info);
4698 spin_unlock_irqrestore(&info->lock,flags);
4700 memcpy(&info->params, &params, sizeof(info->params));
4701 info->tty = oldtty;
4703 info->init_error = rc ? DiagStatus_DmaFailure : 0;
4704 return rc;
4707 static int adapter_test(struct slgt_info *info)
4709 DBGINFO(("testing %s\n", info->device_name));
4710 if (register_test(info) < 0) {
4711 printk("register test failure %s addr=%08X\n",
4712 info->device_name, info->phys_reg_addr);
4713 } else if (irq_test(info) < 0) {
4714 printk("IRQ test failure %s IRQ=%d\n",
4715 info->device_name, info->irq_level);
4716 } else if (loopback_test(info) < 0) {
4717 printk("loopback test failure %s\n", info->device_name);
4719 return info->init_error;
4723 * transmit timeout handler
4725 static void tx_timeout(unsigned long context)
4727 struct slgt_info *info = (struct slgt_info*)context;
4728 unsigned long flags;
4730 DBGINFO(("%s tx_timeout\n", info->device_name));
4731 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4732 info->icount.txtimeout++;
4734 spin_lock_irqsave(&info->lock,flags);
4735 info->tx_active = 0;
4736 info->tx_count = 0;
4737 spin_unlock_irqrestore(&info->lock,flags);
4739 #ifdef CONFIG_HDLC
4740 if (info->netcount)
4741 hdlcdev_tx_done(info);
4742 else
4743 #endif
4744 bh_transmit(info);
4748 * receive buffer polling timer
4750 static void rx_timeout(unsigned long context)
4752 struct slgt_info *info = (struct slgt_info*)context;
4753 unsigned long flags;
4755 DBGINFO(("%s rx_timeout\n", info->device_name));
4756 spin_lock_irqsave(&info->lock, flags);
4757 info->pending_bh |= BH_RECEIVE;
4758 spin_unlock_irqrestore(&info->lock, flags);
4759 bh_handler(info);