appletalk: fix atalk_getname() leak

[linux-2.6/verdex.git] / drivers / video / s3c2410fb.c

/* linux/drivers/video/s3c2410fb.c
 *      Copyright (c) 2004,2005 Arnaud Patard
 *      Copyright (c) 2004-2008 Ben Dooks
 *
 * S3C2410 LCD Framebuffer Driver
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive for
 * more details.
 *
 * Driver based on skeletonfb.c, sa1100fb.c and others.
*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>

#include <asm/io.h>
#include <asm/div64.h>

#include <asm/mach/map.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
#include <mach/fb.h>

#ifdef CONFIG_PM
#include <linux/pm.h>
#endif

#include "s3c2410fb.h"

/* Debugging stuff */
#ifdef CONFIG_FB_S3C2410_DEBUG
static int debug        = 1;
#else
static int debug        = 0;
#endif

#define dprintk(msg...) if (debug) { printk(KERN_DEBUG "s3c2410fb: " msg); }

/* useful functions */

static int is_s3c2412(struct s3c2410fb_info *fbi)
{
        return (fbi->drv_type == DRV_S3C2412);
}

/* s3c2410fb_set_lcdaddr
 *
 * initialise lcd controller address pointers
 */
static void s3c2410fb_set_lcdaddr(struct fb_info *info)
{
        unsigned long saddr1, saddr2, saddr3;
        struct s3c2410fb_info *fbi = info->par;
        void __iomem *regs = fbi->io;

        saddr1  = info->fix.smem_start >> 1;
        saddr2  = info->fix.smem_start;
        saddr2 += info->fix.line_length * info->var.yres;
        saddr2 >>= 1;

        saddr3 = S3C2410_OFFSIZE(0) |
                 S3C2410_PAGEWIDTH((info->fix.line_length / 2) & 0x3ff);

        dprintk("LCDSADDR1 = 0x%08lx\n", saddr1);
        dprintk("LCDSADDR2 = 0x%08lx\n", saddr2);
        dprintk("LCDSADDR3 = 0x%08lx\n", saddr3);

        writel(saddr1, regs + S3C2410_LCDSADDR1);
        writel(saddr2, regs + S3C2410_LCDSADDR2);
        writel(saddr3, regs + S3C2410_LCDSADDR3);
}

/* s3c2410fb_calc_pixclk()
 *
 * calculate divisor for clk->pixclk
 */
static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
                                          unsigned long pixclk)
{
        unsigned long clk = fbi->clk_rate;
        unsigned long long div;

        /* pixclk is in picoseconds, our clock is in Hz
         *
         * Hz -> picoseconds is / 10^-12
         */

        div = (unsigned long long)clk * pixclk;
        div >>= 12;                     /* div / 2^12 */
        do_div(div, 625 * 625UL * 625); /* div / 5^12 */

        dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div);
        return div;
}

/*
 *      s3c2410fb_check_var():
 *      Get the video params out of 'var'. If a value doesn't fit, round it up,
 *      if it's too big, return -EINVAL.
 *
 */
static int s3c2410fb_check_var(struct fb_var_screeninfo *var,
                               struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;
        struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
        struct s3c2410fb_display *display = NULL;
        struct s3c2410fb_display *default_display = mach_info->displays +
                                                    mach_info->default_display;
        int type = default_display->type;
        unsigned i;

        dprintk("check_var(var=%p, info=%p)\n", var, info);

        /* validate x/y resolution */
        /* choose default mode if possible */
        if (var->yres == default_display->yres &&
            var->xres == default_display->xres &&
            var->bits_per_pixel == default_display->bpp)
                display = default_display;
        else
                for (i = 0; i < mach_info->num_displays; i++)
                        if (type == mach_info->displays[i].type &&
                            var->yres == mach_info->displays[i].yres &&
                            var->xres == mach_info->displays[i].xres &&
                            var->bits_per_pixel == mach_info->displays[i].bpp) {
                                display = mach_info->displays + i;
                                break;
                        }

        if (!display) {
                dprintk("wrong resolution or depth %dx%d at %d bpp\n",
                        var->xres, var->yres, var->bits_per_pixel);
                return -EINVAL;
        }

        /* it is always the size as the display */
        var->xres_virtual = display->xres;
        var->yres_virtual = display->yres;
        var->height = display->height;
        var->width = display->width;

        /* copy lcd settings */
        var->pixclock = display->pixclock;
        var->left_margin = display->left_margin;
        var->right_margin = display->right_margin;
        var->upper_margin = display->upper_margin;
        var->lower_margin = display->lower_margin;
        var->vsync_len = display->vsync_len;
        var->hsync_len = display->hsync_len;

        fbi->regs.lcdcon5 = display->lcdcon5;
        /* set display type */
        fbi->regs.lcdcon1 = display->type;

        var->transp.offset = 0;
        var->transp.length = 0;
        /* set r/g/b positions */
        switch (var->bits_per_pixel) {
        case 1:
        case 2:
        case 4:
                var->red.offset = 0;
                var->red.length = var->bits_per_pixel;
                var->green      = var->red;
                var->blue       = var->red;
                break;
        case 8:
                if (display->type != S3C2410_LCDCON1_TFT) {
                        /* 8 bpp 332 */
                        var->red.length         = 3;
                        var->red.offset         = 5;
                        var->green.length       = 3;
                        var->green.offset       = 2;
                        var->blue.length        = 2;
                        var->blue.offset        = 0;
                } else {
                        var->red.offset         = 0;
                        var->red.length         = 8;
                        var->green              = var->red;
                        var->blue               = var->red;
                }
                break;
        case 12:
                /* 12 bpp 444 */
                var->red.length         = 4;
                var->red.offset         = 8;
                var->green.length       = 4;
                var->green.offset       = 4;
                var->blue.length        = 4;
                var->blue.offset        = 0;
                break;

        default:
        case 16:
                if (display->lcdcon5 & S3C2410_LCDCON5_FRM565) {
                        /* 16 bpp, 565 format */
                        var->red.offset         = 11;
                        var->green.offset       = 5;
                        var->blue.offset        = 0;
                        var->red.length         = 5;
                        var->green.length       = 6;
                        var->blue.length        = 5;
                } else {
                        /* 16 bpp, 5551 format */
                        var->red.offset         = 11;
                        var->green.offset       = 6;
                        var->blue.offset        = 1;
                        var->red.length         = 5;
                        var->green.length       = 5;
                        var->blue.length        = 5;
                }
                break;
        case 32:
                /* 24 bpp 888 and 8 dummy */
                var->red.length         = 8;
                var->red.offset         = 16;
                var->green.length       = 8;
                var->green.offset       = 8;
                var->blue.length        = 8;
                var->blue.offset        = 0;
                break;
        }
        return 0;
}

/* s3c2410fb_calculate_stn_lcd_regs
 *
 * calculate register values from var settings
 */
static void s3c2410fb_calculate_stn_lcd_regs(const struct fb_info *info,
                                             struct s3c2410fb_hw *regs)
{
        const struct s3c2410fb_info *fbi = info->par;
        const struct fb_var_screeninfo *var = &info->var;
        int type = regs->lcdcon1 & ~S3C2410_LCDCON1_TFT;
        int hs = var->xres >> 2;
        unsigned wdly = (var->left_margin >> 4) - 1;
        unsigned wlh = (var->hsync_len >> 4) - 1;

        if (type != S3C2410_LCDCON1_STN4)
                hs >>= 1;

        switch (var->bits_per_pixel) {
        case 1:
                regs->lcdcon1 |= S3C2410_LCDCON1_STN1BPP;
                break;
        case 2:
                regs->lcdcon1 |= S3C2410_LCDCON1_STN2GREY;
                break;
        case 4:
                regs->lcdcon1 |= S3C2410_LCDCON1_STN4GREY;
                break;
        case 8:
                regs->lcdcon1 |= S3C2410_LCDCON1_STN8BPP;
                hs *= 3;
                break;
        case 12:
                regs->lcdcon1 |= S3C2410_LCDCON1_STN12BPP;
                hs *= 3;
                break;

        default:
                /* invalid pixel depth */
                dev_err(fbi->dev, "invalid bpp %d\n",
                        var->bits_per_pixel);
        }
        /* update X/Y info */
        dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
                var->left_margin, var->right_margin, var->hsync_len);

        regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1);

        if (wdly > 3)
                wdly = 3;

        if (wlh > 3)
                wlh = 3;

        regs->lcdcon3 = S3C2410_LCDCON3_WDLY(wdly) |
                        S3C2410_LCDCON3_LINEBLANK(var->right_margin / 8) |
                        S3C2410_LCDCON3_HOZVAL(hs - 1);

        regs->lcdcon4 = S3C2410_LCDCON4_WLH(wlh);
}

/* s3c2410fb_calculate_tft_lcd_regs
 *
 * calculate register values from var settings
 */
static void s3c2410fb_calculate_tft_lcd_regs(const struct fb_info *info,
                                             struct s3c2410fb_hw *regs)
{
        const struct s3c2410fb_info *fbi = info->par;
        const struct fb_var_screeninfo *var = &info->var;

        switch (var->bits_per_pixel) {
        case 1:
                regs->lcdcon1 |= S3C2410_LCDCON1_TFT1BPP;
                break;
        case 2:
                regs->lcdcon1 |= S3C2410_LCDCON1_TFT2BPP;
                break;
        case 4:
                regs->lcdcon1 |= S3C2410_LCDCON1_TFT4BPP;
                break;
        case 8:
                regs->lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
                regs->lcdcon5 |= S3C2410_LCDCON5_BSWP |
                                 S3C2410_LCDCON5_FRM565;
                regs->lcdcon5 &= ~S3C2410_LCDCON5_HWSWP;
                break;
        case 16:
                regs->lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
                regs->lcdcon5 &= ~S3C2410_LCDCON5_BSWP;
                regs->lcdcon5 |= S3C2410_LCDCON5_HWSWP;
                break;
        case 32:
                regs->lcdcon1 |= S3C2410_LCDCON1_TFT24BPP;
                regs->lcdcon5 &= ~(S3C2410_LCDCON5_BSWP |
                                   S3C2410_LCDCON5_HWSWP |
                                   S3C2410_LCDCON5_BPP24BL);
                break;
        default:
                /* invalid pixel depth */
                dev_err(fbi->dev, "invalid bpp %d\n",
                        var->bits_per_pixel);
        }
        /* update X/Y info */
        dprintk("setting vert: up=%d, low=%d, sync=%d\n",
                var->upper_margin, var->lower_margin, var->vsync_len);

        dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
                var->left_margin, var->right_margin, var->hsync_len);

        regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1) |
                        S3C2410_LCDCON2_VBPD(var->upper_margin - 1) |
                        S3C2410_LCDCON2_VFPD(var->lower_margin - 1) |
                        S3C2410_LCDCON2_VSPW(var->vsync_len - 1);

        regs->lcdcon3 = S3C2410_LCDCON3_HBPD(var->right_margin - 1) |
                        S3C2410_LCDCON3_HFPD(var->left_margin - 1) |
                        S3C2410_LCDCON3_HOZVAL(var->xres - 1);

        regs->lcdcon4 = S3C2410_LCDCON4_HSPW(var->hsync_len - 1);
}

/* s3c2410fb_activate_var
 *
 * activate (set) the controller from the given framebuffer
 * information
 */
static void s3c2410fb_activate_var(struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;
        void __iomem *regs = fbi->io;
        int type = fbi->regs.lcdcon1 & S3C2410_LCDCON1_TFT;
        struct fb_var_screeninfo *var = &info->var;
        int clkdiv = s3c2410fb_calc_pixclk(fbi, var->pixclock) / 2;

        dprintk("%s: var->xres  = %d\n", __func__, var->xres);
        dprintk("%s: var->yres  = %d\n", __func__, var->yres);
        dprintk("%s: var->bpp   = %d\n", __func__, var->bits_per_pixel);

        if (type == S3C2410_LCDCON1_TFT) {
                s3c2410fb_calculate_tft_lcd_regs(info, &fbi->regs);
                --clkdiv;
                if (clkdiv < 0)
                        clkdiv = 0;
        } else {
                s3c2410fb_calculate_stn_lcd_regs(info, &fbi->regs);
                if (clkdiv < 2)
                        clkdiv = 2;
        }

        fbi->regs.lcdcon1 |=  S3C2410_LCDCON1_CLKVAL(clkdiv);

        /* write new registers */

        dprintk("new register set:\n");
        dprintk("lcdcon[1] = 0x%08lx\n", fbi->regs.lcdcon1);
        dprintk("lcdcon[2] = 0x%08lx\n", fbi->regs.lcdcon2);
        dprintk("lcdcon[3] = 0x%08lx\n", fbi->regs.lcdcon3);
        dprintk("lcdcon[4] = 0x%08lx\n", fbi->regs.lcdcon4);
        dprintk("lcdcon[5] = 0x%08lx\n", fbi->regs.lcdcon5);

        writel(fbi->regs.lcdcon1 & ~S3C2410_LCDCON1_ENVID,
                regs + S3C2410_LCDCON1);
        writel(fbi->regs.lcdcon2, regs + S3C2410_LCDCON2);
        writel(fbi->regs.lcdcon3, regs + S3C2410_LCDCON3);
        writel(fbi->regs.lcdcon4, regs + S3C2410_LCDCON4);
        writel(fbi->regs.lcdcon5, regs + S3C2410_LCDCON5);

        /* set lcd address pointers */
        s3c2410fb_set_lcdaddr(info);

        fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID,
        writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
}

/*
 *      s3c2410fb_set_par - Alters the hardware state.
 *      @info: frame buffer structure that represents a single frame buffer
 *
 */
static int s3c2410fb_set_par(struct fb_info *info)
{
        struct fb_var_screeninfo *var = &info->var;

        switch (var->bits_per_pixel) {
        case 32:
        case 16:
        case 12:
                info->fix.visual = FB_VISUAL_TRUECOLOR;
                break;
        case 1:
                info->fix.visual = FB_VISUAL_MONO01;
                break;
        default:
                info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
                break;
        }

        info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;

        /* activate this new configuration */

        s3c2410fb_activate_var(info);
        return 0;
}

static void schedule_palette_update(struct s3c2410fb_info *fbi,
                                    unsigned int regno, unsigned int val)
{
        unsigned long flags;
        unsigned long irqen;
        void __iomem *irq_base = fbi->irq_base;

        local_irq_save(flags);

        fbi->palette_buffer[regno] = val;

        if (!fbi->palette_ready) {
                fbi->palette_ready = 1;

                /* enable IRQ */
                irqen = readl(irq_base + S3C24XX_LCDINTMSK);
                irqen &= ~S3C2410_LCDINT_FRSYNC;
                writel(irqen, irq_base + S3C24XX_LCDINTMSK);
        }

        local_irq_restore(flags);
}

/* from pxafb.c */
static inline unsigned int chan_to_field(unsigned int chan,
                                         struct fb_bitfield *bf)
{
        chan &= 0xffff;
        chan >>= 16 - bf->length;
        return chan << bf->offset;
}

static int s3c2410fb_setcolreg(unsigned regno,
                               unsigned red, unsigned green, unsigned blue,
                               unsigned transp, struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;
        void __iomem *regs = fbi->io;
        unsigned int val;

        /* dprintk("setcol: regno=%d, rgb=%d,%d,%d\n",
                   regno, red, green, blue); */

        switch (info->fix.visual) {
        case FB_VISUAL_TRUECOLOR:
                /* true-colour, use pseudo-palette */

                if (regno < 16) {
                        u32 *pal = info->pseudo_palette;

                        val  = chan_to_field(red,   &info->var.red);
                        val |= chan_to_field(green, &info->var.green);
                        val |= chan_to_field(blue,  &info->var.blue);

                        pal[regno] = val;
                }
                break;

        case FB_VISUAL_PSEUDOCOLOR:
                if (regno < 256) {
                        /* currently assume RGB 5-6-5 mode */

                        val  = (red   >>  0) & 0xf800;
                        val |= (green >>  5) & 0x07e0;
                        val |= (blue  >> 11) & 0x001f;

                        writel(val, regs + S3C2410_TFTPAL(regno));
                        schedule_palette_update(fbi, regno, val);
                }

                break;

        default:
                return 1;       /* unknown type */
        }

        return 0;
}

/* s3c2410fb_lcd_enable
 *
 * shutdown the lcd controller
 */
static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
{
        unsigned long flags;

        local_irq_save(flags);

        if (enable)
                fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
        else
                fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;

        writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);

        local_irq_restore(flags);
}


/*
 *      s3c2410fb_blank
 *      @blank_mode: the blank mode we want.
 *      @info: frame buffer structure that represents a single frame buffer
 *
 *      Blank the screen if blank_mode != 0, else unblank. Return 0 if
 *      blanking succeeded, != 0 if un-/blanking failed due to e.g. a
 *      video mode which doesn't support it. Implements VESA suspend
 *      and powerdown modes on hardware that supports disabling hsync/vsync:
 *
 *      Returns negative errno on error, or zero on success.
 *
 */
static int s3c2410fb_blank(int blank_mode, struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;
        void __iomem *tpal_reg = fbi->io;

        dprintk("blank(mode=%d, info=%p)\n", blank_mode, info);

        tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;

        if (blank_mode == FB_BLANK_POWERDOWN) {
                s3c2410fb_lcd_enable(fbi, 0);
        } else {
                s3c2410fb_lcd_enable(fbi, 1);
        }

        if (blank_mode == FB_BLANK_UNBLANK)
                writel(0x0, tpal_reg);
        else {
                dprintk("setting TPAL to output 0x000000\n");
                writel(S3C2410_TPAL_EN, tpal_reg);
        }

        return 0;
}

static int s3c2410fb_debug_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off");
}

static int s3c2410fb_debug_store(struct device *dev,
                                 struct device_attribute *attr,
                                 const char *buf, size_t len)
{
        if (len < 1)
                return -EINVAL;

        if (strnicmp(buf, "on", 2) == 0 ||
            strnicmp(buf, "1", 1) == 0) {
                debug = 1;
                printk(KERN_DEBUG "s3c2410fb: Debug On");
        } else if (strnicmp(buf, "off", 3) == 0 ||
                   strnicmp(buf, "0", 1) == 0) {
                debug = 0;
                printk(KERN_DEBUG "s3c2410fb: Debug Off");
        } else {
                return -EINVAL;
        }

        return len;
}

static DEVICE_ATTR(debug, 0666, s3c2410fb_debug_show, s3c2410fb_debug_store);

static struct fb_ops s3c2410fb_ops = {
        .owner          = THIS_MODULE,
        .fb_check_var   = s3c2410fb_check_var,
        .fb_set_par     = s3c2410fb_set_par,
        .fb_blank       = s3c2410fb_blank,
        .fb_setcolreg   = s3c2410fb_setcolreg,
        .fb_fillrect    = cfb_fillrect,
        .fb_copyarea    = cfb_copyarea,
        .fb_imageblit   = cfb_imageblit,
};

/*
 * s3c2410fb_map_video_memory():
 *      Allocates the DRAM memory for the frame buffer.  This buffer is
 *      remapped into a non-cached, non-buffered, memory region to
 *      allow palette and pixel writes to occur without flushing the
 *      cache.  Once this area is remapped, all virtual memory
 *      access to the video memory should occur at the new region.
 */
static int __init s3c2410fb_map_video_memory(struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;
        dma_addr_t map_dma;
        unsigned map_size = PAGE_ALIGN(info->fix.smem_len);

        dprintk("map_video_memory(fbi=%p) map_size %u\n", fbi, map_size);

        info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
                                                   &map_dma, GFP_KERNEL);

        if (info->screen_base) {
                /* prevent initial garbage on screen */
                dprintk("map_video_memory: clear %p:%08x\n",
                        info->screen_base, map_size);
                memset(info->screen_base, 0x00, map_size);

                info->fix.smem_start = map_dma;

                dprintk("map_video_memory: dma=%08lx cpu=%p size=%08x\n",
                        info->fix.smem_start, info->screen_base, map_size);
        }

        return info->screen_base ? 0 : -ENOMEM;
}

static inline void s3c2410fb_unmap_video_memory(struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;

        dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
                              info->screen_base, info->fix.smem_start);
}

static inline void modify_gpio(void __iomem *reg,
                               unsigned long set, unsigned long mask)
{
        unsigned long tmp;

        tmp = readl(reg) & ~mask;
        writel(tmp | set, reg);
}

/*
 * s3c2410fb_init_registers - Initialise all LCD-related registers
 */
static int s3c2410fb_init_registers(struct fb_info *info)
{
        struct s3c2410fb_info *fbi = info->par;
        struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
        unsigned long flags;
        void __iomem *regs = fbi->io;
        void __iomem *tpal;
        void __iomem *lpcsel;

        if (is_s3c2412(fbi)) {
                tpal = regs + S3C2412_TPAL;
                lpcsel = regs + S3C2412_TCONSEL;
        } else {
                tpal = regs + S3C2410_TPAL;
                lpcsel = regs + S3C2410_LPCSEL;
        }

        /* Initialise LCD with values from haret */

        local_irq_save(flags);

        /* modify the gpio(s) with interrupts set (bjd) */

        modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
        modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
        modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
        modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);

        local_irq_restore(flags);

        dprintk("LPCSEL    = 0x%08lx\n", mach_info->lpcsel);
        writel(mach_info->lpcsel, lpcsel);

        dprintk("replacing TPAL %08x\n", readl(tpal));

        /* ensure temporary palette disabled */
        writel(0x00, tpal);

        return 0;
}

static void s3c2410fb_write_palette(struct s3c2410fb_info *fbi)
{
        unsigned int i;
        void __iomem *regs = fbi->io;

        fbi->palette_ready = 0;

        for (i = 0; i < 256; i++) {
                unsigned long ent = fbi->palette_buffer[i];
                if (ent == PALETTE_BUFF_CLEAR)
                        continue;

                writel(ent, regs + S3C2410_TFTPAL(i));

                /* it seems the only way to know exactly
                 * if the palette wrote ok, is to check
                 * to see if the value verifies ok
                 */

                if (readw(regs + S3C2410_TFTPAL(i)) == ent)
                        fbi->palette_buffer[i] = PALETTE_BUFF_CLEAR;
                else
                        fbi->palette_ready = 1;   /* retry */
        }
}

static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
{
        struct s3c2410fb_info *fbi = dev_id;
        void __iomem *irq_base = fbi->irq_base;
        unsigned long lcdirq = readl(irq_base + S3C24XX_LCDINTPND);

        if (lcdirq & S3C2410_LCDINT_FRSYNC) {
                if (fbi->palette_ready)
                        s3c2410fb_write_palette(fbi);

                writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDINTPND);
                writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDSRCPND);
        }

        return IRQ_HANDLED;
}

#ifdef CONFIG_CPU_FREQ

static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
                                        unsigned long val, void *data)
{
        struct cpufreq_freqs *freqs = data;
        struct s3c2410fb_info *info;
        struct fb_info *fbinfo;
        long delta_f;

        info = container_of(nb, struct s3c2410fb_info, freq_transition);
        fbinfo = platform_get_drvdata(to_platform_device(info->dev));

        /* work out change, <0 for speed-up */
        delta_f = info->clk_rate - clk_get_rate(info->clk);

        if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
            (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
                info->clk_rate = clk_get_rate(info->clk);
                s3c2410fb_activate_var(fbinfo);
        }

        return 0;
}

static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
{
        info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;

        return cpufreq_register_notifier(&info->freq_transition,
                                         CPUFREQ_TRANSITION_NOTIFIER);
}

static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
{
        cpufreq_unregister_notifier(&info->freq_transition,
                                    CPUFREQ_TRANSITION_NOTIFIER);
}

#else
static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
{
        return 0;
}

static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
{
}
#endif


static char driver_name[] = "s3c2410fb";

static int __init s3c24xxfb_probe(struct platform_device *pdev,
                                  enum s3c_drv_type drv_type)
{
        struct s3c2410fb_info *info;
        struct s3c2410fb_display *display;
        struct fb_info *fbinfo;
        struct s3c2410fb_mach_info *mach_info;
        struct resource *res;
        int ret;
        int irq;
        int i;
        int size;
        u32 lcdcon1;

        mach_info = pdev->dev.platform_data;
        if (mach_info == NULL) {
                dev_err(&pdev->dev,
                        "no platform data for lcd, cannot attach\n");
                return -EINVAL;
        }

        if (mach_info->default_display >= mach_info->num_displays) {
                dev_err(&pdev->dev, "default is %d but only %d displays\n",
                        mach_info->default_display, mach_info->num_displays);
                return -EINVAL;
        }

        display = mach_info->displays + mach_info->default_display;

        irq = platform_get_irq(pdev, 0);
        if (irq < 0) {
                dev_err(&pdev->dev, "no irq for device\n");
                return -ENOENT;
        }

        fbinfo = framebuffer_alloc(sizeof(struct s3c2410fb_info), &pdev->dev);
        if (!fbinfo)
                return -ENOMEM;

        platform_set_drvdata(pdev, fbinfo);

        info = fbinfo->par;
        info->dev = &pdev->dev;
        info->drv_type = drv_type;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (res == NULL) {
                dev_err(&pdev->dev, "failed to get memory registers\n");
                ret = -ENXIO;
                goto dealloc_fb;
        }

        size = (res->end - res->start) + 1;
        info->mem = request_mem_region(res->start, size, pdev->name);
        if (info->mem == NULL) {
                dev_err(&pdev->dev, "failed to get memory region\n");
                ret = -ENOENT;
                goto dealloc_fb;
        }

        info->io = ioremap(res->start, size);
        if (info->io == NULL) {
                dev_err(&pdev->dev, "ioremap() of registers failed\n");
                ret = -ENXIO;
                goto release_mem;
        }

        info->irq_base = info->io + ((drv_type == DRV_S3C2412) ? S3C2412_LCDINTBASE : S3C2410_LCDINTBASE);

        dprintk("devinit\n");

        strcpy(fbinfo->fix.id, driver_name);

        /* Stop the video */
        lcdcon1 = readl(info->io + S3C2410_LCDCON1);
        writel(lcdcon1 & ~S3C2410_LCDCON1_ENVID, info->io + S3C2410_LCDCON1);

        fbinfo->fix.type            = FB_TYPE_PACKED_PIXELS;
        fbinfo->fix.type_aux        = 0;
        fbinfo->fix.xpanstep        = 0;
        fbinfo->fix.ypanstep        = 0;
        fbinfo->fix.ywrapstep       = 0;
        fbinfo->fix.accel           = FB_ACCEL_NONE;

        fbinfo->var.nonstd          = 0;
        fbinfo->var.activate        = FB_ACTIVATE_NOW;
        fbinfo->var.accel_flags     = 0;
        fbinfo->var.vmode           = FB_VMODE_NONINTERLACED;

        fbinfo->fbops               = &s3c2410fb_ops;
        fbinfo->flags               = FBINFO_FLAG_DEFAULT;
        fbinfo->pseudo_palette      = &info->pseudo_pal;

        for (i = 0; i < 256; i++)
                info->palette_buffer[i] = PALETTE_BUFF_CLEAR;

        ret = request_irq(irq, s3c2410fb_irq, IRQF_DISABLED, pdev->name, info);
        if (ret) {
                dev_err(&pdev->dev, "cannot get irq %d - err %d\n", irq, ret);
                ret = -EBUSY;
                goto release_regs;
        }

        info->clk = clk_get(NULL, "lcd");
        if (!info->clk || IS_ERR(info->clk)) {
                printk(KERN_ERR "failed to get lcd clock source\n");
                ret = -ENOENT;
                goto release_irq;
        }

        clk_enable(info->clk);
        dprintk("got and enabled clock\n");

        msleep(1);

        info->clk_rate = clk_get_rate(info->clk);

        /* find maximum required memory size for display */
        for (i = 0; i < mach_info->num_displays; i++) {
                unsigned long smem_len = mach_info->displays[i].xres;

                smem_len *= mach_info->displays[i].yres;
                smem_len *= mach_info->displays[i].bpp;
                smem_len >>= 3;
                if (fbinfo->fix.smem_len < smem_len)
                        fbinfo->fix.smem_len = smem_len;
        }

        /* Initialize video memory */
        ret = s3c2410fb_map_video_memory(fbinfo);
        if (ret) {
                printk(KERN_ERR "Failed to allocate video RAM: %d\n", ret);
                ret = -ENOMEM;
                goto release_clock;
        }

        dprintk("got video memory\n");

        fbinfo->var.xres = display->xres;
        fbinfo->var.yres = display->yres;
        fbinfo->var.bits_per_pixel = display->bpp;

        s3c2410fb_init_registers(fbinfo);

        s3c2410fb_check_var(&fbinfo->var, fbinfo);

        ret = s3c2410fb_cpufreq_register(info);
        if (ret < 0) {
                dev_err(&pdev->dev, "Failed to register cpufreq\n");
                goto free_video_memory;
        }

        ret = register_framebuffer(fbinfo);
        if (ret < 0) {
                printk(KERN_ERR "Failed to register framebuffer device: %d\n",
                        ret);
                goto free_cpufreq;
        }

        /* create device files */
        ret = device_create_file(&pdev->dev, &dev_attr_debug);
        if (ret) {
                printk(KERN_ERR "failed to add debug attribute\n");
        }

        printk(KERN_INFO "fb%d: %s frame buffer device\n",
                fbinfo->node, fbinfo->fix.id);

        return 0;

 free_cpufreq:
        s3c2410fb_cpufreq_deregister(info);
free_video_memory:
        s3c2410fb_unmap_video_memory(fbinfo);
release_clock:
        clk_disable(info->clk);
        clk_put(info->clk);
release_irq:
        free_irq(irq, info);
release_regs:
        iounmap(info->io);
release_mem:
        release_resource(info->mem);
        kfree(info->mem);
dealloc_fb:
        platform_set_drvdata(pdev, NULL);
        framebuffer_release(fbinfo);
        return ret;
}

static int __init s3c2410fb_probe(struct platform_device *pdev)
{
        return s3c24xxfb_probe(pdev, DRV_S3C2410);
}

static int __init s3c2412fb_probe(struct platform_device *pdev)
{
        return s3c24xxfb_probe(pdev, DRV_S3C2412);
}


/*
 *  Cleanup
 */
static int s3c2410fb_remove(struct platform_device *pdev)
{
        struct fb_info *fbinfo = platform_get_drvdata(pdev);
        struct s3c2410fb_info *info = fbinfo->par;
        int irq;

        unregister_framebuffer(fbinfo);
        s3c2410fb_cpufreq_deregister(info);

        s3c2410fb_lcd_enable(info, 0);
        msleep(1);

        s3c2410fb_unmap_video_memory(fbinfo);

        if (info->clk) {
                clk_disable(info->clk);
                clk_put(info->clk);
                info->clk = NULL;
        }

        irq = platform_get_irq(pdev, 0);
        free_irq(irq, info);

        iounmap(info->io);

        release_resource(info->mem);
        kfree(info->mem);

        platform_set_drvdata(pdev, NULL);
        framebuffer_release(fbinfo);

        return 0;
}

#ifdef CONFIG_PM

/* suspend and resume support for the lcd controller */
static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state)
{
        struct fb_info     *fbinfo = platform_get_drvdata(dev);
        struct s3c2410fb_info *info = fbinfo->par;

        s3c2410fb_lcd_enable(info, 0);

        /* sleep before disabling the clock, we need to ensure
         * the LCD DMA engine is not going to get back on the bus
         * before the clock goes off again (bjd) */

        msleep(1);
        clk_disable(info->clk);

        return 0;
}

static int s3c2410fb_resume(struct platform_device *dev)
{
        struct fb_info     *fbinfo = platform_get_drvdata(dev);
        struct s3c2410fb_info *info = fbinfo->par;

        clk_enable(info->clk);
        msleep(1);

        s3c2410fb_init_registers(fbinfo);

        /* re-activate our display after resume */
        s3c2410fb_activate_var(fbinfo);
        s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);

        return 0;
}

#else
#define s3c2410fb_suspend NULL
#define s3c2410fb_resume  NULL
#endif

static struct platform_driver s3c2410fb_driver = {
        .probe          = s3c2410fb_probe,
        .remove         = s3c2410fb_remove,
        .suspend        = s3c2410fb_suspend,
        .resume         = s3c2410fb_resume,
        .driver         = {
                .name   = "s3c2410-lcd",
                .owner  = THIS_MODULE,
        },
};

static struct platform_driver s3c2412fb_driver = {
        .probe          = s3c2412fb_probe,
        .remove         = s3c2410fb_remove,
        .suspend        = s3c2410fb_suspend,
        .resume         = s3c2410fb_resume,
        .driver         = {
                .name   = "s3c2412-lcd",
                .owner  = THIS_MODULE,
        },
};

int __init s3c2410fb_init(void)
{
        int ret = platform_driver_register(&s3c2410fb_driver);

        if (ret == 0)
                ret = platform_driver_register(&s3c2412fb_driver);;

        return ret;
}

static void __exit s3c2410fb_cleanup(void)
{
        platform_driver_unregister(&s3c2410fb_driver);
        platform_driver_unregister(&s3c2412fb_driver);
}

module_init(s3c2410fb_init);
module_exit(s3c2410fb_cleanup);

MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "
              "Ben Dooks <ben-linux@fluff.org>");
MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c2410-lcd");
MODULE_ALIAS("platform:s3c2412-lcd");