x86, UV: Fix information in __uv_hub_info structure
[linux-2.6/verdex.git] / kernel / hrtimer.c
blob49da79ab8486df682bc7f252674b4a01b810c108
1 /*
2 * linux/kernel/hrtimer.c
4 * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
5 * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
6 * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
8 * High-resolution kernel timers
10 * In contrast to the low-resolution timeout API implemented in
11 * kernel/timer.c, hrtimers provide finer resolution and accuracy
12 * depending on system configuration and capabilities.
14 * These timers are currently used for:
15 * - itimers
16 * - POSIX timers
17 * - nanosleep
18 * - precise in-kernel timing
20 * Started by: Thomas Gleixner and Ingo Molnar
22 * Credits:
23 * based on kernel/timer.c
25 * Help, testing, suggestions, bugfixes, improvements were
26 * provided by:
28 * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
29 * et. al.
31 * For licencing details see kernel-base/COPYING
34 #include <linux/cpu.h>
35 #include <linux/module.h>
36 #include <linux/percpu.h>
37 #include <linux/hrtimer.h>
38 #include <linux/notifier.h>
39 #include <linux/syscalls.h>
40 #include <linux/kallsyms.h>
41 #include <linux/interrupt.h>
42 #include <linux/tick.h>
43 #include <linux/seq_file.h>
44 #include <linux/err.h>
45 #include <linux/debugobjects.h>
46 #include <linux/sched.h>
47 #include <linux/timer.h>
49 #include <asm/uaccess.h>
51 /**
52 * ktime_get - get the monotonic time in ktime_t format
54 * returns the time in ktime_t format
56 ktime_t ktime_get(void)
58 struct timespec now;
60 ktime_get_ts(&now);
62 return timespec_to_ktime(now);
64 EXPORT_SYMBOL_GPL(ktime_get);
66 /**
67 * ktime_get_real - get the real (wall-) time in ktime_t format
69 * returns the time in ktime_t format
71 ktime_t ktime_get_real(void)
73 struct timespec now;
75 getnstimeofday(&now);
77 return timespec_to_ktime(now);
80 EXPORT_SYMBOL_GPL(ktime_get_real);
83 * The timer bases:
85 * Note: If we want to add new timer bases, we have to skip the two
86 * clock ids captured by the cpu-timers. We do this by holding empty
87 * entries rather than doing math adjustment of the clock ids.
88 * This ensures that we capture erroneous accesses to these clock ids
89 * rather than moving them into the range of valid clock id's.
91 DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
94 .clock_base =
97 .index = CLOCK_REALTIME,
98 .get_time = &ktime_get_real,
99 .resolution = KTIME_LOW_RES,
102 .index = CLOCK_MONOTONIC,
103 .get_time = &ktime_get,
104 .resolution = KTIME_LOW_RES,
110 * ktime_get_ts - get the monotonic clock in timespec format
111 * @ts: pointer to timespec variable
113 * The function calculates the monotonic clock from the realtime
114 * clock and the wall_to_monotonic offset and stores the result
115 * in normalized timespec format in the variable pointed to by @ts.
117 void ktime_get_ts(struct timespec *ts)
119 struct timespec tomono;
120 unsigned long seq;
122 do {
123 seq = read_seqbegin(&xtime_lock);
124 getnstimeofday(ts);
125 tomono = wall_to_monotonic;
127 } while (read_seqretry(&xtime_lock, seq));
129 set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
130 ts->tv_nsec + tomono.tv_nsec);
132 EXPORT_SYMBOL_GPL(ktime_get_ts);
135 * Get the coarse grained time at the softirq based on xtime and
136 * wall_to_monotonic.
138 static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
140 ktime_t xtim, tomono;
141 struct timespec xts, tom;
142 unsigned long seq;
144 do {
145 seq = read_seqbegin(&xtime_lock);
146 xts = current_kernel_time();
147 tom = wall_to_monotonic;
148 } while (read_seqretry(&xtime_lock, seq));
150 xtim = timespec_to_ktime(xts);
151 tomono = timespec_to_ktime(tom);
152 base->clock_base[CLOCK_REALTIME].softirq_time = xtim;
153 base->clock_base[CLOCK_MONOTONIC].softirq_time =
154 ktime_add(xtim, tomono);
158 * Functions and macros which are different for UP/SMP systems are kept in a
159 * single place
161 #ifdef CONFIG_SMP
164 * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
165 * means that all timers which are tied to this base via timer->base are
166 * locked, and the base itself is locked too.
168 * So __run_timers/migrate_timers can safely modify all timers which could
169 * be found on the lists/queues.
171 * When the timer's base is locked, and the timer removed from list, it is
172 * possible to set timer->base = NULL and drop the lock: the timer remains
173 * locked.
175 static
176 struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
177 unsigned long *flags)
179 struct hrtimer_clock_base *base;
181 for (;;) {
182 base = timer->base;
183 if (likely(base != NULL)) {
184 spin_lock_irqsave(&base->cpu_base->lock, *flags);
185 if (likely(base == timer->base))
186 return base;
187 /* The timer has migrated to another CPU: */
188 spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
190 cpu_relax();
196 * Get the preferred target CPU for NOHZ
198 static int hrtimer_get_target(int this_cpu, int pinned)
200 #ifdef CONFIG_NO_HZ
201 if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
202 int preferred_cpu = get_nohz_load_balancer();
204 if (preferred_cpu >= 0)
205 return preferred_cpu;
207 #endif
208 return this_cpu;
212 * With HIGHRES=y we do not migrate the timer when it is expiring
213 * before the next event on the target cpu because we cannot reprogram
214 * the target cpu hardware and we would cause it to fire late.
216 * Called with cpu_base->lock of target cpu held.
218 static int
219 hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
221 #ifdef CONFIG_HIGH_RES_TIMERS
222 ktime_t expires;
224 if (!new_base->cpu_base->hres_active)
225 return 0;
227 expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
228 return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
229 #else
230 return 0;
231 #endif
235 * Switch the timer base to the current CPU when possible.
237 static inline struct hrtimer_clock_base *
238 switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
239 int pinned)
241 struct hrtimer_clock_base *new_base;
242 struct hrtimer_cpu_base *new_cpu_base;
243 int this_cpu = smp_processor_id();
244 int cpu = hrtimer_get_target(this_cpu, pinned);
246 again:
247 new_cpu_base = &per_cpu(hrtimer_bases, cpu);
248 new_base = &new_cpu_base->clock_base[base->index];
250 if (base != new_base) {
252 * We are trying to move timer to new_base.
253 * However we can't change timer's base while it is running,
254 * so we keep it on the same CPU. No hassle vs. reprogramming
255 * the event source in the high resolution case. The softirq
256 * code will take care of this when the timer function has
257 * completed. There is no conflict as we hold the lock until
258 * the timer is enqueued.
260 if (unlikely(hrtimer_callback_running(timer)))
261 return base;
263 /* See the comment in lock_timer_base() */
264 timer->base = NULL;
265 spin_unlock(&base->cpu_base->lock);
266 spin_lock(&new_base->cpu_base->lock);
268 if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
269 cpu = this_cpu;
270 spin_unlock(&new_base->cpu_base->lock);
271 spin_lock(&base->cpu_base->lock);
272 timer->base = base;
273 goto again;
275 timer->base = new_base;
277 return new_base;
280 #else /* CONFIG_SMP */
282 static inline struct hrtimer_clock_base *
283 lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
285 struct hrtimer_clock_base *base = timer->base;
287 spin_lock_irqsave(&base->cpu_base->lock, *flags);
289 return base;
292 # define switch_hrtimer_base(t, b, p) (b)
294 #endif /* !CONFIG_SMP */
297 * Functions for the union type storage format of ktime_t which are
298 * too large for inlining:
300 #if BITS_PER_LONG < 64
301 # ifndef CONFIG_KTIME_SCALAR
303 * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
304 * @kt: addend
305 * @nsec: the scalar nsec value to add
307 * Returns the sum of kt and nsec in ktime_t format
309 ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
311 ktime_t tmp;
313 if (likely(nsec < NSEC_PER_SEC)) {
314 tmp.tv64 = nsec;
315 } else {
316 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
318 tmp = ktime_set((long)nsec, rem);
321 return ktime_add(kt, tmp);
324 EXPORT_SYMBOL_GPL(ktime_add_ns);
327 * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
328 * @kt: minuend
329 * @nsec: the scalar nsec value to subtract
331 * Returns the subtraction of @nsec from @kt in ktime_t format
333 ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec)
335 ktime_t tmp;
337 if (likely(nsec < NSEC_PER_SEC)) {
338 tmp.tv64 = nsec;
339 } else {
340 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
342 tmp = ktime_set((long)nsec, rem);
345 return ktime_sub(kt, tmp);
348 EXPORT_SYMBOL_GPL(ktime_sub_ns);
349 # endif /* !CONFIG_KTIME_SCALAR */
352 * Divide a ktime value by a nanosecond value
354 u64 ktime_divns(const ktime_t kt, s64 div)
356 u64 dclc;
357 int sft = 0;
359 dclc = ktime_to_ns(kt);
360 /* Make sure the divisor is less than 2^32: */
361 while (div >> 32) {
362 sft++;
363 div >>= 1;
365 dclc >>= sft;
366 do_div(dclc, (unsigned long) div);
368 return dclc;
370 #endif /* BITS_PER_LONG >= 64 */
373 * Add two ktime values and do a safety check for overflow:
375 ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs)
377 ktime_t res = ktime_add(lhs, rhs);
380 * We use KTIME_SEC_MAX here, the maximum timeout which we can
381 * return to user space in a timespec:
383 if (res.tv64 < 0 || res.tv64 < lhs.tv64 || res.tv64 < rhs.tv64)
384 res = ktime_set(KTIME_SEC_MAX, 0);
386 return res;
389 EXPORT_SYMBOL_GPL(ktime_add_safe);
391 #ifdef CONFIG_DEBUG_OBJECTS_TIMERS
393 static struct debug_obj_descr hrtimer_debug_descr;
396 * fixup_init is called when:
397 * - an active object is initialized
399 static int hrtimer_fixup_init(void *addr, enum debug_obj_state state)
401 struct hrtimer *timer = addr;
403 switch (state) {
404 case ODEBUG_STATE_ACTIVE:
405 hrtimer_cancel(timer);
406 debug_object_init(timer, &hrtimer_debug_descr);
407 return 1;
408 default:
409 return 0;
414 * fixup_activate is called when:
415 * - an active object is activated
416 * - an unknown object is activated (might be a statically initialized object)
418 static int hrtimer_fixup_activate(void *addr, enum debug_obj_state state)
420 switch (state) {
422 case ODEBUG_STATE_NOTAVAILABLE:
423 WARN_ON_ONCE(1);
424 return 0;
426 case ODEBUG_STATE_ACTIVE:
427 WARN_ON(1);
429 default:
430 return 0;
435 * fixup_free is called when:
436 * - an active object is freed
438 static int hrtimer_fixup_free(void *addr, enum debug_obj_state state)
440 struct hrtimer *timer = addr;
442 switch (state) {
443 case ODEBUG_STATE_ACTIVE:
444 hrtimer_cancel(timer);
445 debug_object_free(timer, &hrtimer_debug_descr);
446 return 1;
447 default:
448 return 0;
452 static struct debug_obj_descr hrtimer_debug_descr = {
453 .name = "hrtimer",
454 .fixup_init = hrtimer_fixup_init,
455 .fixup_activate = hrtimer_fixup_activate,
456 .fixup_free = hrtimer_fixup_free,
459 static inline void debug_hrtimer_init(struct hrtimer *timer)
461 debug_object_init(timer, &hrtimer_debug_descr);
464 static inline void debug_hrtimer_activate(struct hrtimer *timer)
466 debug_object_activate(timer, &hrtimer_debug_descr);
469 static inline void debug_hrtimer_deactivate(struct hrtimer *timer)
471 debug_object_deactivate(timer, &hrtimer_debug_descr);
474 static inline void debug_hrtimer_free(struct hrtimer *timer)
476 debug_object_free(timer, &hrtimer_debug_descr);
479 static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
480 enum hrtimer_mode mode);
482 void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id,
483 enum hrtimer_mode mode)
485 debug_object_init_on_stack(timer, &hrtimer_debug_descr);
486 __hrtimer_init(timer, clock_id, mode);
489 void destroy_hrtimer_on_stack(struct hrtimer *timer)
491 debug_object_free(timer, &hrtimer_debug_descr);
494 #else
495 static inline void debug_hrtimer_init(struct hrtimer *timer) { }
496 static inline void debug_hrtimer_activate(struct hrtimer *timer) { }
497 static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
498 #endif
500 /* High resolution timer related functions */
501 #ifdef CONFIG_HIGH_RES_TIMERS
504 * High resolution timer enabled ?
506 static int hrtimer_hres_enabled __read_mostly = 1;
509 * Enable / Disable high resolution mode
511 static int __init setup_hrtimer_hres(char *str)
513 if (!strcmp(str, "off"))
514 hrtimer_hres_enabled = 0;
515 else if (!strcmp(str, "on"))
516 hrtimer_hres_enabled = 1;
517 else
518 return 0;
519 return 1;
522 __setup("highres=", setup_hrtimer_hres);
525 * hrtimer_high_res_enabled - query, if the highres mode is enabled
527 static inline int hrtimer_is_hres_enabled(void)
529 return hrtimer_hres_enabled;
533 * Is the high resolution mode active ?
535 static inline int hrtimer_hres_active(void)
537 return __get_cpu_var(hrtimer_bases).hres_active;
541 * Reprogram the event source with checking both queues for the
542 * next event
543 * Called with interrupts disabled and base->lock held
545 static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base)
547 int i;
548 struct hrtimer_clock_base *base = cpu_base->clock_base;
549 ktime_t expires;
551 cpu_base->expires_next.tv64 = KTIME_MAX;
553 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
554 struct hrtimer *timer;
556 if (!base->first)
557 continue;
558 timer = rb_entry(base->first, struct hrtimer, node);
559 expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
561 * clock_was_set() has changed base->offset so the
562 * result might be negative. Fix it up to prevent a
563 * false positive in clockevents_program_event()
565 if (expires.tv64 < 0)
566 expires.tv64 = 0;
567 if (expires.tv64 < cpu_base->expires_next.tv64)
568 cpu_base->expires_next = expires;
571 if (cpu_base->expires_next.tv64 != KTIME_MAX)
572 tick_program_event(cpu_base->expires_next, 1);
576 * Shared reprogramming for clock_realtime and clock_monotonic
578 * When a timer is enqueued and expires earlier than the already enqueued
579 * timers, we have to check, whether it expires earlier than the timer for
580 * which the clock event device was armed.
582 * Called with interrupts disabled and base->cpu_base.lock held
584 static int hrtimer_reprogram(struct hrtimer *timer,
585 struct hrtimer_clock_base *base)
587 ktime_t *expires_next = &__get_cpu_var(hrtimer_bases).expires_next;
588 ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
589 int res;
591 WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
594 * When the callback is running, we do not reprogram the clock event
595 * device. The timer callback is either running on a different CPU or
596 * the callback is executed in the hrtimer_interrupt context. The
597 * reprogramming is handled either by the softirq, which called the
598 * callback or at the end of the hrtimer_interrupt.
600 if (hrtimer_callback_running(timer))
601 return 0;
604 * CLOCK_REALTIME timer might be requested with an absolute
605 * expiry time which is less than base->offset. Nothing wrong
606 * about that, just avoid to call into the tick code, which
607 * has now objections against negative expiry values.
609 if (expires.tv64 < 0)
610 return -ETIME;
612 if (expires.tv64 >= expires_next->tv64)
613 return 0;
616 * Clockevents returns -ETIME, when the event was in the past.
618 res = tick_program_event(expires, 0);
619 if (!IS_ERR_VALUE(res))
620 *expires_next = expires;
621 return res;
626 * Retrigger next event is called after clock was set
628 * Called with interrupts disabled via on_each_cpu()
630 static void retrigger_next_event(void *arg)
632 struct hrtimer_cpu_base *base;
633 struct timespec realtime_offset;
634 unsigned long seq;
636 if (!hrtimer_hres_active())
637 return;
639 do {
640 seq = read_seqbegin(&xtime_lock);
641 set_normalized_timespec(&realtime_offset,
642 -wall_to_monotonic.tv_sec,
643 -wall_to_monotonic.tv_nsec);
644 } while (read_seqretry(&xtime_lock, seq));
646 base = &__get_cpu_var(hrtimer_bases);
648 /* Adjust CLOCK_REALTIME offset */
649 spin_lock(&base->lock);
650 base->clock_base[CLOCK_REALTIME].offset =
651 timespec_to_ktime(realtime_offset);
653 hrtimer_force_reprogram(base);
654 spin_unlock(&base->lock);
658 * Clock realtime was set
660 * Change the offset of the realtime clock vs. the monotonic
661 * clock.
663 * We might have to reprogram the high resolution timer interrupt. On
664 * SMP we call the architecture specific code to retrigger _all_ high
665 * resolution timer interrupts. On UP we just disable interrupts and
666 * call the high resolution interrupt code.
668 void clock_was_set(void)
670 /* Retrigger the CPU local events everywhere */
671 on_each_cpu(retrigger_next_event, NULL, 1);
675 * During resume we might have to reprogram the high resolution timer
676 * interrupt (on the local CPU):
678 void hres_timers_resume(void)
680 WARN_ONCE(!irqs_disabled(),
681 KERN_INFO "hres_timers_resume() called with IRQs enabled!");
683 retrigger_next_event(NULL);
687 * Initialize the high resolution related parts of cpu_base
689 static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
691 base->expires_next.tv64 = KTIME_MAX;
692 base->hres_active = 0;
696 * Initialize the high resolution related parts of a hrtimer
698 static inline void hrtimer_init_timer_hres(struct hrtimer *timer)
704 * When High resolution timers are active, try to reprogram. Note, that in case
705 * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
706 * check happens. The timer gets enqueued into the rbtree. The reprogramming
707 * and expiry check is done in the hrtimer_interrupt or in the softirq.
709 static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
710 struct hrtimer_clock_base *base,
711 int wakeup)
713 if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
714 if (wakeup) {
715 spin_unlock(&base->cpu_base->lock);
716 raise_softirq_irqoff(HRTIMER_SOFTIRQ);
717 spin_lock(&base->cpu_base->lock);
718 } else
719 __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
721 return 1;
724 return 0;
728 * Switch to high resolution mode
730 static int hrtimer_switch_to_hres(void)
732 int cpu = smp_processor_id();
733 struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
734 unsigned long flags;
736 if (base->hres_active)
737 return 1;
739 local_irq_save(flags);
741 if (tick_init_highres()) {
742 local_irq_restore(flags);
743 printk(KERN_WARNING "Could not switch to high resolution "
744 "mode on CPU %d\n", cpu);
745 return 0;
747 base->hres_active = 1;
748 base->clock_base[CLOCK_REALTIME].resolution = KTIME_HIGH_RES;
749 base->clock_base[CLOCK_MONOTONIC].resolution = KTIME_HIGH_RES;
751 tick_setup_sched_timer();
753 /* "Retrigger" the interrupt to get things going */
754 retrigger_next_event(NULL);
755 local_irq_restore(flags);
756 printk(KERN_DEBUG "Switched to high resolution mode on CPU %d\n",
757 smp_processor_id());
758 return 1;
761 #else
763 static inline int hrtimer_hres_active(void) { return 0; }
764 static inline int hrtimer_is_hres_enabled(void) { return 0; }
765 static inline int hrtimer_switch_to_hres(void) { return 0; }
766 static inline void hrtimer_force_reprogram(struct hrtimer_cpu_base *base) { }
767 static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
768 struct hrtimer_clock_base *base,
769 int wakeup)
771 return 0;
773 static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
774 static inline void hrtimer_init_timer_hres(struct hrtimer *timer) { }
776 #endif /* CONFIG_HIGH_RES_TIMERS */
778 #ifdef CONFIG_TIMER_STATS
779 void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer, void *addr)
781 if (timer->start_site)
782 return;
784 timer->start_site = addr;
785 memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
786 timer->start_pid = current->pid;
788 #endif
791 * Counterpart to lock_hrtimer_base above:
793 static inline
794 void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
796 spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
800 * hrtimer_forward - forward the timer expiry
801 * @timer: hrtimer to forward
802 * @now: forward past this time
803 * @interval: the interval to forward
805 * Forward the timer expiry so it will expire in the future.
806 * Returns the number of overruns.
808 u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
810 u64 orun = 1;
811 ktime_t delta;
813 delta = ktime_sub(now, hrtimer_get_expires(timer));
815 if (delta.tv64 < 0)
816 return 0;
818 if (interval.tv64 < timer->base->resolution.tv64)
819 interval.tv64 = timer->base->resolution.tv64;
821 if (unlikely(delta.tv64 >= interval.tv64)) {
822 s64 incr = ktime_to_ns(interval);
824 orun = ktime_divns(delta, incr);
825 hrtimer_add_expires_ns(timer, incr * orun);
826 if (hrtimer_get_expires_tv64(timer) > now.tv64)
827 return orun;
829 * This (and the ktime_add() below) is the
830 * correction for exact:
832 orun++;
834 hrtimer_add_expires(timer, interval);
836 return orun;
838 EXPORT_SYMBOL_GPL(hrtimer_forward);
841 * enqueue_hrtimer - internal function to (re)start a timer
843 * The timer is inserted in expiry order. Insertion into the
844 * red black tree is O(log(n)). Must hold the base lock.
846 * Returns 1 when the new timer is the leftmost timer in the tree.
848 static int enqueue_hrtimer(struct hrtimer *timer,
849 struct hrtimer_clock_base *base)
851 struct rb_node **link = &base->active.rb_node;
852 struct rb_node *parent = NULL;
853 struct hrtimer *entry;
854 int leftmost = 1;
856 debug_hrtimer_activate(timer);
859 * Find the right place in the rbtree:
861 while (*link) {
862 parent = *link;
863 entry = rb_entry(parent, struct hrtimer, node);
865 * We dont care about collisions. Nodes with
866 * the same expiry time stay together.
868 if (hrtimer_get_expires_tv64(timer) <
869 hrtimer_get_expires_tv64(entry)) {
870 link = &(*link)->rb_left;
871 } else {
872 link = &(*link)->rb_right;
873 leftmost = 0;
878 * Insert the timer to the rbtree and check whether it
879 * replaces the first pending timer
881 if (leftmost)
882 base->first = &timer->node;
884 rb_link_node(&timer->node, parent, link);
885 rb_insert_color(&timer->node, &base->active);
887 * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
888 * state of a possibly running callback.
890 timer->state |= HRTIMER_STATE_ENQUEUED;
892 return leftmost;
896 * __remove_hrtimer - internal function to remove a timer
898 * Caller must hold the base lock.
900 * High resolution timer mode reprograms the clock event device when the
901 * timer is the one which expires next. The caller can disable this by setting
902 * reprogram to zero. This is useful, when the context does a reprogramming
903 * anyway (e.g. timer interrupt)
905 static void __remove_hrtimer(struct hrtimer *timer,
906 struct hrtimer_clock_base *base,
907 unsigned long newstate, int reprogram)
909 if (timer->state & HRTIMER_STATE_ENQUEUED) {
911 * Remove the timer from the rbtree and replace the
912 * first entry pointer if necessary.
914 if (base->first == &timer->node) {
915 base->first = rb_next(&timer->node);
916 /* Reprogram the clock event device. if enabled */
917 if (reprogram && hrtimer_hres_active())
918 hrtimer_force_reprogram(base->cpu_base);
920 rb_erase(&timer->node, &base->active);
922 timer->state = newstate;
926 * remove hrtimer, called with base lock held
928 static inline int
929 remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
931 if (hrtimer_is_queued(timer)) {
932 int reprogram;
935 * Remove the timer and force reprogramming when high
936 * resolution mode is active and the timer is on the current
937 * CPU. If we remove a timer on another CPU, reprogramming is
938 * skipped. The interrupt event on this CPU is fired and
939 * reprogramming happens in the interrupt handler. This is a
940 * rare case and less expensive than a smp call.
942 debug_hrtimer_deactivate(timer);
943 timer_stats_hrtimer_clear_start_info(timer);
944 reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
945 __remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE,
946 reprogram);
947 return 1;
949 return 0;
952 int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
953 unsigned long delta_ns, const enum hrtimer_mode mode,
954 int wakeup)
956 struct hrtimer_clock_base *base, *new_base;
957 unsigned long flags;
958 int ret, leftmost;
960 base = lock_hrtimer_base(timer, &flags);
962 /* Remove an active timer from the queue: */
963 ret = remove_hrtimer(timer, base);
965 /* Switch the timer base, if necessary: */
966 new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
968 if (mode & HRTIMER_MODE_REL) {
969 tim = ktime_add_safe(tim, new_base->get_time());
971 * CONFIG_TIME_LOW_RES is a temporary way for architectures
972 * to signal that they simply return xtime in
973 * do_gettimeoffset(). In this case we want to round up by
974 * resolution when starting a relative timer, to avoid short
975 * timeouts. This will go away with the GTOD framework.
977 #ifdef CONFIG_TIME_LOW_RES
978 tim = ktime_add_safe(tim, base->resolution);
979 #endif
982 hrtimer_set_expires_range_ns(timer, tim, delta_ns);
984 timer_stats_hrtimer_set_start_info(timer);
986 leftmost = enqueue_hrtimer(timer, new_base);
989 * Only allow reprogramming if the new base is on this CPU.
990 * (it might still be on another CPU if the timer was pending)
992 * XXX send_remote_softirq() ?
994 if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
995 hrtimer_enqueue_reprogram(timer, new_base, wakeup);
997 unlock_hrtimer_base(timer, &flags);
999 return ret;
1003 * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
1004 * @timer: the timer to be added
1005 * @tim: expiry time
1006 * @delta_ns: "slack" range for the timer
1007 * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
1009 * Returns:
1010 * 0 on success
1011 * 1 when the timer was active
1013 int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
1014 unsigned long delta_ns, const enum hrtimer_mode mode)
1016 return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1);
1018 EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
1021 * hrtimer_start - (re)start an hrtimer on the current CPU
1022 * @timer: the timer to be added
1023 * @tim: expiry time
1024 * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
1026 * Returns:
1027 * 0 on success
1028 * 1 when the timer was active
1031 hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
1033 return __hrtimer_start_range_ns(timer, tim, 0, mode, 1);
1035 EXPORT_SYMBOL_GPL(hrtimer_start);
1039 * hrtimer_try_to_cancel - try to deactivate a timer
1040 * @timer: hrtimer to stop
1042 * Returns:
1043 * 0 when the timer was not active
1044 * 1 when the timer was active
1045 * -1 when the timer is currently excuting the callback function and
1046 * cannot be stopped
1048 int hrtimer_try_to_cancel(struct hrtimer *timer)
1050 struct hrtimer_clock_base *base;
1051 unsigned long flags;
1052 int ret = -1;
1054 base = lock_hrtimer_base(timer, &flags);
1056 if (!hrtimer_callback_running(timer))
1057 ret = remove_hrtimer(timer, base);
1059 unlock_hrtimer_base(timer, &flags);
1061 return ret;
1064 EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
1067 * hrtimer_cancel - cancel a timer and wait for the handler to finish.
1068 * @timer: the timer to be cancelled
1070 * Returns:
1071 * 0 when the timer was not active
1072 * 1 when the timer was active
1074 int hrtimer_cancel(struct hrtimer *timer)
1076 for (;;) {
1077 int ret = hrtimer_try_to_cancel(timer);
1079 if (ret >= 0)
1080 return ret;
1081 cpu_relax();
1084 EXPORT_SYMBOL_GPL(hrtimer_cancel);
1087 * hrtimer_get_remaining - get remaining time for the timer
1088 * @timer: the timer to read
1090 ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
1092 struct hrtimer_clock_base *base;
1093 unsigned long flags;
1094 ktime_t rem;
1096 base = lock_hrtimer_base(timer, &flags);
1097 rem = hrtimer_expires_remaining(timer);
1098 unlock_hrtimer_base(timer, &flags);
1100 return rem;
1102 EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
1104 #ifdef CONFIG_NO_HZ
1106 * hrtimer_get_next_event - get the time until next expiry event
1108 * Returns the delta to the next expiry event or KTIME_MAX if no timer
1109 * is pending.
1111 ktime_t hrtimer_get_next_event(void)
1113 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1114 struct hrtimer_clock_base *base = cpu_base->clock_base;
1115 ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
1116 unsigned long flags;
1117 int i;
1119 spin_lock_irqsave(&cpu_base->lock, flags);
1121 if (!hrtimer_hres_active()) {
1122 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
1123 struct hrtimer *timer;
1125 if (!base->first)
1126 continue;
1128 timer = rb_entry(base->first, struct hrtimer, node);
1129 delta.tv64 = hrtimer_get_expires_tv64(timer);
1130 delta = ktime_sub(delta, base->get_time());
1131 if (delta.tv64 < mindelta.tv64)
1132 mindelta.tv64 = delta.tv64;
1136 spin_unlock_irqrestore(&cpu_base->lock, flags);
1138 if (mindelta.tv64 < 0)
1139 mindelta.tv64 = 0;
1140 return mindelta;
1142 #endif
1144 static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1145 enum hrtimer_mode mode)
1147 struct hrtimer_cpu_base *cpu_base;
1149 memset(timer, 0, sizeof(struct hrtimer));
1151 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1153 if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
1154 clock_id = CLOCK_MONOTONIC;
1156 timer->base = &cpu_base->clock_base[clock_id];
1157 INIT_LIST_HEAD(&timer->cb_entry);
1158 hrtimer_init_timer_hres(timer);
1160 #ifdef CONFIG_TIMER_STATS
1161 timer->start_site = NULL;
1162 timer->start_pid = -1;
1163 memset(timer->start_comm, 0, TASK_COMM_LEN);
1164 #endif
1168 * hrtimer_init - initialize a timer to the given clock
1169 * @timer: the timer to be initialized
1170 * @clock_id: the clock to be used
1171 * @mode: timer mode abs/rel
1173 void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1174 enum hrtimer_mode mode)
1176 debug_hrtimer_init(timer);
1177 __hrtimer_init(timer, clock_id, mode);
1179 EXPORT_SYMBOL_GPL(hrtimer_init);
1182 * hrtimer_get_res - get the timer resolution for a clock
1183 * @which_clock: which clock to query
1184 * @tp: pointer to timespec variable to store the resolution
1186 * Store the resolution of the clock selected by @which_clock in the
1187 * variable pointed to by @tp.
1189 int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
1191 struct hrtimer_cpu_base *cpu_base;
1193 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1194 *tp = ktime_to_timespec(cpu_base->clock_base[which_clock].resolution);
1196 return 0;
1198 EXPORT_SYMBOL_GPL(hrtimer_get_res);
1200 static void __run_hrtimer(struct hrtimer *timer)
1202 struct hrtimer_clock_base *base = timer->base;
1203 struct hrtimer_cpu_base *cpu_base = base->cpu_base;
1204 enum hrtimer_restart (*fn)(struct hrtimer *);
1205 int restart;
1207 WARN_ON(!irqs_disabled());
1209 debug_hrtimer_deactivate(timer);
1210 __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0);
1211 timer_stats_account_hrtimer(timer);
1212 fn = timer->function;
1215 * Because we run timers from hardirq context, there is no chance
1216 * they get migrated to another cpu, therefore its safe to unlock
1217 * the timer base.
1219 spin_unlock(&cpu_base->lock);
1220 restart = fn(timer);
1221 spin_lock(&cpu_base->lock);
1224 * Note: We clear the CALLBACK bit after enqueue_hrtimer and
1225 * we do not reprogramm the event hardware. Happens either in
1226 * hrtimer_start_range_ns() or in hrtimer_interrupt()
1228 if (restart != HRTIMER_NORESTART) {
1229 BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
1230 enqueue_hrtimer(timer, base);
1232 timer->state &= ~HRTIMER_STATE_CALLBACK;
1235 #ifdef CONFIG_HIGH_RES_TIMERS
1237 static int force_clock_reprogram;
1240 * After 5 iteration's attempts, we consider that hrtimer_interrupt()
1241 * is hanging, which could happen with something that slows the interrupt
1242 * such as the tracing. Then we force the clock reprogramming for each future
1243 * hrtimer interrupts to avoid infinite loops and use the min_delta_ns
1244 * threshold that we will overwrite.
1245 * The next tick event will be scheduled to 3 times we currently spend on
1246 * hrtimer_interrupt(). This gives a good compromise, the cpus will spend
1247 * 1/4 of their time to process the hrtimer interrupts. This is enough to
1248 * let it running without serious starvation.
1251 static inline void
1252 hrtimer_interrupt_hanging(struct clock_event_device *dev,
1253 ktime_t try_time)
1255 force_clock_reprogram = 1;
1256 dev->min_delta_ns = (unsigned long)try_time.tv64 * 3;
1257 printk(KERN_WARNING "hrtimer: interrupt too slow, "
1258 "forcing clock min delta to %lu ns\n", dev->min_delta_ns);
1261 * High resolution timer interrupt
1262 * Called with interrupts disabled
1264 void hrtimer_interrupt(struct clock_event_device *dev)
1266 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1267 struct hrtimer_clock_base *base;
1268 ktime_t expires_next, now;
1269 int nr_retries = 0;
1270 int i;
1272 BUG_ON(!cpu_base->hres_active);
1273 cpu_base->nr_events++;
1274 dev->next_event.tv64 = KTIME_MAX;
1276 retry:
1277 /* 5 retries is enough to notice a hang */
1278 if (!(++nr_retries % 5))
1279 hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now));
1281 now = ktime_get();
1283 expires_next.tv64 = KTIME_MAX;
1285 spin_lock(&cpu_base->lock);
1287 * We set expires_next to KTIME_MAX here with cpu_base->lock
1288 * held to prevent that a timer is enqueued in our queue via
1289 * the migration code. This does not affect enqueueing of
1290 * timers which run their callback and need to be requeued on
1291 * this CPU.
1293 cpu_base->expires_next.tv64 = KTIME_MAX;
1295 base = cpu_base->clock_base;
1297 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1298 ktime_t basenow;
1299 struct rb_node *node;
1301 basenow = ktime_add(now, base->offset);
1303 while ((node = base->first)) {
1304 struct hrtimer *timer;
1306 timer = rb_entry(node, struct hrtimer, node);
1309 * The immediate goal for using the softexpires is
1310 * minimizing wakeups, not running timers at the
1311 * earliest interrupt after their soft expiration.
1312 * This allows us to avoid using a Priority Search
1313 * Tree, which can answer a stabbing querry for
1314 * overlapping intervals and instead use the simple
1315 * BST we already have.
1316 * We don't add extra wakeups by delaying timers that
1317 * are right-of a not yet expired timer, because that
1318 * timer will have to trigger a wakeup anyway.
1321 if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
1322 ktime_t expires;
1324 expires = ktime_sub(hrtimer_get_expires(timer),
1325 base->offset);
1326 if (expires.tv64 < expires_next.tv64)
1327 expires_next = expires;
1328 break;
1331 __run_hrtimer(timer);
1333 base++;
1337 * Store the new expiry value so the migration code can verify
1338 * against it.
1340 cpu_base->expires_next = expires_next;
1341 spin_unlock(&cpu_base->lock);
1343 /* Reprogramming necessary ? */
1344 if (expires_next.tv64 != KTIME_MAX) {
1345 if (tick_program_event(expires_next, force_clock_reprogram))
1346 goto retry;
1351 * local version of hrtimer_peek_ahead_timers() called with interrupts
1352 * disabled.
1354 static void __hrtimer_peek_ahead_timers(void)
1356 struct tick_device *td;
1358 if (!hrtimer_hres_active())
1359 return;
1361 td = &__get_cpu_var(tick_cpu_device);
1362 if (td && td->evtdev)
1363 hrtimer_interrupt(td->evtdev);
1367 * hrtimer_peek_ahead_timers -- run soft-expired timers now
1369 * hrtimer_peek_ahead_timers will peek at the timer queue of
1370 * the current cpu and check if there are any timers for which
1371 * the soft expires time has passed. If any such timers exist,
1372 * they are run immediately and then removed from the timer queue.
1375 void hrtimer_peek_ahead_timers(void)
1377 unsigned long flags;
1379 local_irq_save(flags);
1380 __hrtimer_peek_ahead_timers();
1381 local_irq_restore(flags);
1384 static void run_hrtimer_softirq(struct softirq_action *h)
1386 hrtimer_peek_ahead_timers();
1389 #else /* CONFIG_HIGH_RES_TIMERS */
1391 static inline void __hrtimer_peek_ahead_timers(void) { }
1393 #endif /* !CONFIG_HIGH_RES_TIMERS */
1396 * Called from timer softirq every jiffy, expire hrtimers:
1398 * For HRT its the fall back code to run the softirq in the timer
1399 * softirq context in case the hrtimer initialization failed or has
1400 * not been done yet.
1402 void hrtimer_run_pending(void)
1404 if (hrtimer_hres_active())
1405 return;
1408 * This _is_ ugly: We have to check in the softirq context,
1409 * whether we can switch to highres and / or nohz mode. The
1410 * clocksource switch happens in the timer interrupt with
1411 * xtime_lock held. Notification from there only sets the
1412 * check bit in the tick_oneshot code, otherwise we might
1413 * deadlock vs. xtime_lock.
1415 if (tick_check_oneshot_change(!hrtimer_is_hres_enabled()))
1416 hrtimer_switch_to_hres();
1420 * Called from hardirq context every jiffy
1422 void hrtimer_run_queues(void)
1424 struct rb_node *node;
1425 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1426 struct hrtimer_clock_base *base;
1427 int index, gettime = 1;
1429 if (hrtimer_hres_active())
1430 return;
1432 for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
1433 base = &cpu_base->clock_base[index];
1435 if (!base->first)
1436 continue;
1438 if (gettime) {
1439 hrtimer_get_softirq_time(cpu_base);
1440 gettime = 0;
1443 spin_lock(&cpu_base->lock);
1445 while ((node = base->first)) {
1446 struct hrtimer *timer;
1448 timer = rb_entry(node, struct hrtimer, node);
1449 if (base->softirq_time.tv64 <=
1450 hrtimer_get_expires_tv64(timer))
1451 break;
1453 __run_hrtimer(timer);
1455 spin_unlock(&cpu_base->lock);
1460 * Sleep related functions:
1462 static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer)
1464 struct hrtimer_sleeper *t =
1465 container_of(timer, struct hrtimer_sleeper, timer);
1466 struct task_struct *task = t->task;
1468 t->task = NULL;
1469 if (task)
1470 wake_up_process(task);
1472 return HRTIMER_NORESTART;
1475 void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
1477 sl->timer.function = hrtimer_wakeup;
1478 sl->task = task;
1481 static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
1483 hrtimer_init_sleeper(t, current);
1485 do {
1486 set_current_state(TASK_INTERRUPTIBLE);
1487 hrtimer_start_expires(&t->timer, mode);
1488 if (!hrtimer_active(&t->timer))
1489 t->task = NULL;
1491 if (likely(t->task))
1492 schedule();
1494 hrtimer_cancel(&t->timer);
1495 mode = HRTIMER_MODE_ABS;
1497 } while (t->task && !signal_pending(current));
1499 __set_current_state(TASK_RUNNING);
1501 return t->task == NULL;
1504 static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp)
1506 struct timespec rmt;
1507 ktime_t rem;
1509 rem = hrtimer_expires_remaining(timer);
1510 if (rem.tv64 <= 0)
1511 return 0;
1512 rmt = ktime_to_timespec(rem);
1514 if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
1515 return -EFAULT;
1517 return 1;
1520 long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
1522 struct hrtimer_sleeper t;
1523 struct timespec __user *rmtp;
1524 int ret = 0;
1526 hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
1527 HRTIMER_MODE_ABS);
1528 hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
1530 if (do_nanosleep(&t, HRTIMER_MODE_ABS))
1531 goto out;
1533 rmtp = restart->nanosleep.rmtp;
1534 if (rmtp) {
1535 ret = update_rmtp(&t.timer, rmtp);
1536 if (ret <= 0)
1537 goto out;
1540 /* The other values in restart are already filled in */
1541 ret = -ERESTART_RESTARTBLOCK;
1542 out:
1543 destroy_hrtimer_on_stack(&t.timer);
1544 return ret;
1547 long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
1548 const enum hrtimer_mode mode, const clockid_t clockid)
1550 struct restart_block *restart;
1551 struct hrtimer_sleeper t;
1552 int ret = 0;
1553 unsigned long slack;
1555 slack = current->timer_slack_ns;
1556 if (rt_task(current))
1557 slack = 0;
1559 hrtimer_init_on_stack(&t.timer, clockid, mode);
1560 hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
1561 if (do_nanosleep(&t, mode))
1562 goto out;
1564 /* Absolute timers do not update the rmtp value and restart: */
1565 if (mode == HRTIMER_MODE_ABS) {
1566 ret = -ERESTARTNOHAND;
1567 goto out;
1570 if (rmtp) {
1571 ret = update_rmtp(&t.timer, rmtp);
1572 if (ret <= 0)
1573 goto out;
1576 restart = &current_thread_info()->restart_block;
1577 restart->fn = hrtimer_nanosleep_restart;
1578 restart->nanosleep.index = t.timer.base->index;
1579 restart->nanosleep.rmtp = rmtp;
1580 restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
1582 ret = -ERESTART_RESTARTBLOCK;
1583 out:
1584 destroy_hrtimer_on_stack(&t.timer);
1585 return ret;
1588 SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
1589 struct timespec __user *, rmtp)
1591 struct timespec tu;
1593 if (copy_from_user(&tu, rqtp, sizeof(tu)))
1594 return -EFAULT;
1596 if (!timespec_valid(&tu))
1597 return -EINVAL;
1599 return hrtimer_nanosleep(&tu, rmtp, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
1603 * Functions related to boot-time initialization:
1605 static void __cpuinit init_hrtimers_cpu(int cpu)
1607 struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
1608 int i;
1610 spin_lock_init(&cpu_base->lock);
1612 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
1613 cpu_base->clock_base[i].cpu_base = cpu_base;
1615 hrtimer_init_hres(cpu_base);
1618 #ifdef CONFIG_HOTPLUG_CPU
1620 static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
1621 struct hrtimer_clock_base *new_base)
1623 struct hrtimer *timer;
1624 struct rb_node *node;
1626 while ((node = rb_first(&old_base->active))) {
1627 timer = rb_entry(node, struct hrtimer, node);
1628 BUG_ON(hrtimer_callback_running(timer));
1629 debug_hrtimer_deactivate(timer);
1632 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
1633 * timer could be seen as !active and just vanish away
1634 * under us on another CPU
1636 __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
1637 timer->base = new_base;
1639 * Enqueue the timers on the new cpu. This does not
1640 * reprogram the event device in case the timer
1641 * expires before the earliest on this CPU, but we run
1642 * hrtimer_interrupt after we migrated everything to
1643 * sort out already expired timers and reprogram the
1644 * event device.
1646 enqueue_hrtimer(timer, new_base);
1648 /* Clear the migration state bit */
1649 timer->state &= ~HRTIMER_STATE_MIGRATE;
1653 static void migrate_hrtimers(int scpu)
1655 struct hrtimer_cpu_base *old_base, *new_base;
1656 int i;
1658 BUG_ON(cpu_online(scpu));
1659 tick_cancel_sched_timer(scpu);
1661 local_irq_disable();
1662 old_base = &per_cpu(hrtimer_bases, scpu);
1663 new_base = &__get_cpu_var(hrtimer_bases);
1665 * The caller is globally serialized and nobody else
1666 * takes two locks at once, deadlock is not possible.
1668 spin_lock(&new_base->lock);
1669 spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
1671 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1672 migrate_hrtimer_list(&old_base->clock_base[i],
1673 &new_base->clock_base[i]);
1676 spin_unlock(&old_base->lock);
1677 spin_unlock(&new_base->lock);
1679 /* Check, if we got expired work to do */
1680 __hrtimer_peek_ahead_timers();
1681 local_irq_enable();
1684 #endif /* CONFIG_HOTPLUG_CPU */
1686 static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self,
1687 unsigned long action, void *hcpu)
1689 int scpu = (long)hcpu;
1691 switch (action) {
1693 case CPU_UP_PREPARE:
1694 case CPU_UP_PREPARE_FROZEN:
1695 init_hrtimers_cpu(scpu);
1696 break;
1698 #ifdef CONFIG_HOTPLUG_CPU
1699 case CPU_DYING:
1700 case CPU_DYING_FROZEN:
1701 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
1702 break;
1703 case CPU_DEAD:
1704 case CPU_DEAD_FROZEN:
1706 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu);
1707 migrate_hrtimers(scpu);
1708 break;
1710 #endif
1712 default:
1713 break;
1716 return NOTIFY_OK;
1719 static struct notifier_block __cpuinitdata hrtimers_nb = {
1720 .notifier_call = hrtimer_cpu_notify,
1723 void __init hrtimers_init(void)
1725 hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
1726 (void *)(long)smp_processor_id());
1727 register_cpu_notifier(&hrtimers_nb);
1728 #ifdef CONFIG_HIGH_RES_TIMERS
1729 open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq);
1730 #endif
1734 * schedule_hrtimeout_range - sleep until timeout
1735 * @expires: timeout value (ktime_t)
1736 * @delta: slack in expires timeout (ktime_t)
1737 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1739 * Make the current task sleep until the given expiry time has
1740 * elapsed. The routine will return immediately unless
1741 * the current task state has been set (see set_current_state()).
1743 * The @delta argument gives the kernel the freedom to schedule the
1744 * actual wakeup to a time that is both power and performance friendly.
1745 * The kernel give the normal best effort behavior for "@expires+@delta",
1746 * but may decide to fire the timer earlier, but no earlier than @expires.
1748 * You can set the task state as follows -
1750 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1751 * pass before the routine returns.
1753 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1754 * delivered to the current task.
1756 * The current task state is guaranteed to be TASK_RUNNING when this
1757 * routine returns.
1759 * Returns 0 when the timer has expired otherwise -EINTR
1761 int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
1762 const enum hrtimer_mode mode)
1764 struct hrtimer_sleeper t;
1767 * Optimize when a zero timeout value is given. It does not
1768 * matter whether this is an absolute or a relative time.
1770 if (expires && !expires->tv64) {
1771 __set_current_state(TASK_RUNNING);
1772 return 0;
1776 * A NULL parameter means "inifinte"
1778 if (!expires) {
1779 schedule();
1780 __set_current_state(TASK_RUNNING);
1781 return -EINTR;
1784 hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode);
1785 hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
1787 hrtimer_init_sleeper(&t, current);
1789 hrtimer_start_expires(&t.timer, mode);
1790 if (!hrtimer_active(&t.timer))
1791 t.task = NULL;
1793 if (likely(t.task))
1794 schedule();
1796 hrtimer_cancel(&t.timer);
1797 destroy_hrtimer_on_stack(&t.timer);
1799 __set_current_state(TASK_RUNNING);
1801 return !t.task ? 0 : -EINTR;
1803 EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
1806 * schedule_hrtimeout - sleep until timeout
1807 * @expires: timeout value (ktime_t)
1808 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1810 * Make the current task sleep until the given expiry time has
1811 * elapsed. The routine will return immediately unless
1812 * the current task state has been set (see set_current_state()).
1814 * You can set the task state as follows -
1816 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1817 * pass before the routine returns.
1819 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1820 * delivered to the current task.
1822 * The current task state is guaranteed to be TASK_RUNNING when this
1823 * routine returns.
1825 * Returns 0 when the timer has expired otherwise -EINTR
1827 int __sched schedule_hrtimeout(ktime_t *expires,
1828 const enum hrtimer_mode mode)
1830 return schedule_hrtimeout_range(expires, 0, mode);
1832 EXPORT_SYMBOL_GPL(schedule_hrtimeout);