include/asm-mips/mach-cobalt/cobalt.h

   1 /*
   2  * Lowlevel hardware stuff for the MIPS based Cobalt microservers.
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file "COPYING" in the main directory of this archive
   6  * for more details.
   7  *
   8  * Copyright (C) 1997 Cobalt Microserver
   9  * Copyright (C) 1997, 2003 Ralf Baechle
  10  * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
  11  */
  12 #ifndef __ASM_COBALT_H
  13 #define __ASM_COBALT_H
  14
  15 /*
  16  * i8259 legacy interrupts used on Cobalt:
  17  *
  18  *     8  - RTC
  19  *     9  - PCI
  20  *    14  - IDE0
  21  *    15  - IDE1
  22  */
  23 #define COBALT_QUBE_SLOT_IRQ    9
  24
  25 /*
  26  * CPU IRQs  are 16 ... 23
  27  */
  28 #define COBALT_CPU_IRQ          16
  29
  30 #define COBALT_GALILEO_IRQ      (COBALT_CPU_IRQ + 2)
  31 #define COBALT_SCC_IRQ          (COBALT_CPU_IRQ + 3)    /* pre-production has 85C30 */
  32 #define COBALT_RAQ_SCSI_IRQ     (COBALT_CPU_IRQ + 3)
  33 #define COBALT_ETH0_IRQ         (COBALT_CPU_IRQ + 3)
  34 #define COBALT_QUBE1_ETH0_IRQ   (COBALT_CPU_IRQ + 4)
  35 #define COBALT_ETH1_IRQ         (COBALT_CPU_IRQ + 4)
  36 #define COBALT_SERIAL_IRQ       (COBALT_CPU_IRQ + 5)
  37 #define COBALT_SCSI_IRQ         (COBALT_CPU_IRQ + 5)
  38 #define COBALT_VIA_IRQ          (COBALT_CPU_IRQ + 6)    /* Chained to VIA ISA bridge */
  39
  40 /*
  41  * PCI configuration space manifest constants.  These are wired into
  42  * the board layout according to the PCI spec to enable the software
  43  * to probe the hardware configuration space in a well defined manner.
  44  *
  45  * The PCI_DEVSHFT() macro transforms these values into numbers
  46  * suitable for passing as the dev parameter to the various
  47  * pcibios_read/write_config routines.
  48  */
  49 #define COBALT_PCICONF_CPU      0x06
  50 #define COBALT_PCICONF_ETH0     0x07
  51 #define COBALT_PCICONF_RAQSCSI  0x08
  52 #define COBALT_PCICONF_VIA      0x09
  53 #define COBALT_PCICONF_PCISLOT  0x0A
  54 #define COBALT_PCICONF_ETH1     0x0C
  55
  56
  57 /*
  58  * The Cobalt board id information.  The boards have an ID number wired
  59  * into the VIA that is available in the high nibble of register 94.
  60  * This register is available in the VIA configuration space through the
  61  * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
  62  */
  63 #define VIA_COBALT_BRD_ID_REG  0x94
  64 #define VIA_COBALT_BRD_REG_to_ID(reg)  ((unsigned char) (reg) >> 4)
  65 #define COBALT_BRD_ID_QUBE1    0x3
  66 #define COBALT_BRD_ID_RAQ1     0x4
  67 #define COBALT_BRD_ID_QUBE2    0x5
  68 #define COBALT_BRD_ID_RAQ2     0x6
  69
  70 #define PCI_CFG_SET(devfn,where)                                        \
  71         GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) |          \
  72                 (PCI_FUNC (devfn) << 8) | (where)))
  73
  74 #define COBALT_LED_PORT         (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
  75 # define COBALT_LED_BAR_LEFT    (1 << 0)        /* Qube */
  76 # define COBALT_LED_BAR_RIGHT   (1 << 1)        /* Qube */
  77 # define COBALT_LED_WEB         (1 << 2)        /* RaQ */
  78 # define COBALT_LED_POWER_OFF   (1 << 3)        /* RaQ */
  79 # define COBALT_LED_RESET       0x0f
  80
  81 #define COBALT_KEY_PORT         ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
  82 # define COBALT_KEY_CLEAR       (1 << 1)
  83 # define COBALT_KEY_LEFT        (1 << 2)
  84 # define COBALT_KEY_UP          (1 << 3)
  85 # define COBALT_KEY_DOWN        (1 << 4)
  86 # define COBALT_KEY_RIGHT       (1 << 5)
  87 # define COBALT_KEY_ENTER       (1 << 6)
  88 # define COBALT_KEY_SELECT      (1 << 7)
  89 # define COBALT_KEY_MASK        0xfe
  90
  91 #define COBALT_UART             ((volatile unsigned char *) CKSEG1ADDR(0x1c800000))
  92
  93 #endif /* __ASM_COBALT_H */