drivers/ide/ns87415.c

   1 /*
   2  * Copyright (C) 1997-1998      Mark Lord <mlord@pobox.com>
   3  * Copyright (C) 1998           Eddie C. Dost <ecd@skynet.be>
   4  * Copyright (C) 1999-2000      Andre Hedrick <andre@linux-ide.org>
   5  * Copyright (C) 2004           Grant Grundler <grundler at parisc-linux.org>
   6  *
   7  * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
   8  */
   9
  10 #include <linux/module.h>
  11 #include <linux/types.h>
  12 #include <linux/kernel.h>
  13 #include <linux/interrupt.h>
  14 #include <linux/pci.h>
  15 #include <linux/delay.h>
  16 #include <linux/ide.h>
  17 #include <linux/init.h>
  18
  19 #include <asm/io.h>
  20
  21 #define DRV_NAME "ns87415"
  22
  23 #ifdef CONFIG_SUPERIO
  24 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
  25  * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
  26  * which use the integrated NS87514 cell for CD-ROM support.
  27  * i.e we have to support for CD-ROM installs.
  28  * See drivers/parisc/superio.c for more gory details.
  29  */
  30 #include <asm/superio.h>
  31
  32 #define SUPERIO_IDE_MAX_RETRIES 25
  33
  34 /* Because of a defect in Super I/O, all reads of the PCI DMA status
  35  * registers, IDE status register and the IDE select register need to be
  36  * retried
  37  */
  38 static u8 superio_ide_inb (unsigned long port)
  39 {
  40         u8 tmp;
  41         int retries = SUPERIO_IDE_MAX_RETRIES;
  42
  43         /* printk(" [ reading port 0x%x with retry ] ", port); */
  44
  45         do {
  46                 tmp = inb(port);
  47                 if (tmp == 0)
  48                         udelay(50);
  49         } while (tmp == 0 && retries-- > 0);
  50
  51         return tmp;
  52 }
  53
  54 static u8 superio_read_status(ide_hwif_t *hwif)
  55 {
  56         return superio_ide_inb(hwif->io_ports.status_addr);
  57 }
  58
  59 static u8 superio_dma_sff_read_status(ide_hwif_t *hwif)
  60 {
  61         return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
  62 }
  63
  64 static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
  65 {
  66         struct ide_io_ports *io_ports = &drive->hwif->io_ports;
  67         struct ide_taskfile *tf = &cmd->tf;
  68
  69         if (cmd->ftf_flags & IDE_FTFLAG_IN_DATA) {
  70                 u16 data = inw(io_ports->data_addr);
  71
  72                 tf->data = data & 0xff;
  73                 tf->hob_data = (data >> 8) & 0xff;
  74         }
  75
  76         /* be sure we're looking at the low order bits */
  77         outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
  78
  79         if (cmd->tf_flags & IDE_TFLAG_IN_FEATURE)
  80                 tf->feature = inb(io_ports->feature_addr);
  81         if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
  82                 tf->nsect  = inb(io_ports->nsect_addr);
  83         if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
  84                 tf->lbal   = inb(io_ports->lbal_addr);
  85         if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
  86                 tf->lbam   = inb(io_ports->lbam_addr);
  87         if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
  88                 tf->lbah   = inb(io_ports->lbah_addr);
  89         if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
  90                 tf->device = superio_ide_inb(io_ports->device_addr);
  91
  92         if (cmd->tf_flags & IDE_TFLAG_LBA48) {
  93                 outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
  94
  95                 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
  96                         tf->hob_feature = inb(io_ports->feature_addr);
  97                 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
  98                         tf->hob_nsect   = inb(io_ports->nsect_addr);
  99                 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
 100                         tf->hob_lbal    = inb(io_ports->lbal_addr);
 101                 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
 102                         tf->hob_lbam    = inb(io_ports->lbam_addr);
 103                 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
 104                         tf->hob_lbah    = inb(io_ports->lbah_addr);
 105         }
 106 }
 107
 108 static const struct ide_tp_ops superio_tp_ops = {
 109         .exec_command           = ide_exec_command,
 110         .read_status            = superio_read_status,
 111         .read_altstatus         = ide_read_altstatus,
 112
 113         .set_irq                = ide_set_irq,
 114
 115         .tf_load                = ide_tf_load,
 116         .tf_read                = superio_tf_read,
 117
 118         .input_data             = ide_input_data,
 119         .output_data            = ide_output_data,
 120 };
 121
 122 static void __devinit superio_init_iops(struct hwif_s *hwif)
 123 {
 124         struct pci_dev *pdev = to_pci_dev(hwif->dev);
 125         u32 dma_stat;
 126         u8 port = hwif->channel, tmp;
 127
 128         dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
 129
 130         /* Clear error/interrupt, enable dma */
 131         tmp = superio_ide_inb(dma_stat);
 132         outb(tmp | 0x66, dma_stat);
 133 }
 134 #else
 135 #define superio_dma_sff_read_status ide_dma_sff_read_status
 136 #endif
 137
 138 static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
 139
 140 /*
 141  * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
 142  * the IRQ associated with the port,
 143  * and selects either PIO or DMA handshaking for the next I/O operation.
 144  */
 145 static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
 146 {
 147         ide_hwif_t *hwif = drive->hwif;
 148         struct pci_dev *dev = to_pci_dev(hwif->dev);
 149         unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
 150         unsigned long flags;
 151
 152         local_irq_save(flags);
 153         new = *old;
 154
 155         /* Adjust IRQ enable bit */
 156         bit = 1 << (8 + hwif->channel);
 157
 158         if (drive->dev_flags & IDE_DFLAG_PRESENT)
 159                 new &= ~bit;
 160         else
 161                 new |= bit;
 162
 163         /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
 164         bit   = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
 165         other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
 166         new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
 167
 168         if (new != *old) {
 169                 unsigned char stat;
 170
 171                 /*
 172                  * Don't change DMA engine settings while Write Buffers
 173                  * are busy.
 174                  */
 175                 (void) pci_read_config_byte(dev, 0x43, &stat);
 176                 while (stat & 0x03) {
 177                         udelay(1);
 178                         (void) pci_read_config_byte(dev, 0x43, &stat);
 179                 }
 180
 181                 *old = new;
 182                 (void) pci_write_config_dword(dev, 0x40, new);
 183
 184                 /*
 185                  * And let things settle...
 186                  */
 187                 udelay(10);
 188         }
 189
 190         local_irq_restore(flags);
 191 }
 192
 193 static void ns87415_selectproc (ide_drive_t *drive)
 194 {
 195         ns87415_prepare_drive(drive,
 196                               !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
 197 }
 198
 199 static int ns87415_dma_end(ide_drive_t *drive)
 200 {
 201         ide_hwif_t *hwif = drive->hwif;
 202         u8 dma_stat = 0, dma_cmd = 0;
 203
 204         drive->waiting_for_dma = 0;
 205         dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
 206         /* get DMA command mode */
 207         dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 208         /* stop DMA */
 209         outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
 210         /* from ERRATA: clear the INTR & ERROR bits */
 211         dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 212         outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
 213         /* and free any DMA resources */
 214         ide_destroy_dmatable(drive);
 215         /* verify good DMA status */
 216         return (dma_stat & 7) != 4;
 217 }
 218
 219 static int ns87415_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 220 {
 221         /* select DMA xfer */
 222         ns87415_prepare_drive(drive, 1);
 223         if (ide_dma_setup(drive, cmd) == 0)
 224                 return 0;
 225         /* DMA failed: select PIO xfer */
 226         ns87415_prepare_drive(drive, 0);
 227         return 1;
 228 }
 229
 230 static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
 231 {
 232         struct pci_dev *dev = to_pci_dev(hwif->dev);
 233         unsigned int ctrl, using_inta;
 234         u8 progif;
 235 #ifdef __sparc_v9__
 236         int timeout;
 237         u8 stat;
 238 #endif
 239
 240         /*
 241          * We cannot probe for IRQ: both ports share common IRQ on INTA.
 242          * Also, leave IRQ masked during drive probing, to prevent infinite
 243          * interrupts from a potentially floating INTA..
 244          *
 245          * IRQs get unmasked in selectproc when drive is first used.
 246          */
 247         (void) pci_read_config_dword(dev, 0x40, &ctrl);
 248         (void) pci_read_config_byte(dev, 0x09, &progif);
 249         /* is irq in "native" mode? */
 250         using_inta = progif & (1 << (hwif->channel << 1));
 251         if (!using_inta)
 252                 using_inta = ctrl & (1 << (4 + hwif->channel));
 253         if (hwif->mate) {
 254                 hwif->select_data = hwif->mate->select_data;
 255         } else {
 256                 hwif->select_data = (unsigned long)
 257                                         &ns87415_control[ns87415_count++];
 258                 ctrl |= (1 << 8) | (1 << 9);    /* mask both IRQs */
 259                 if (using_inta)
 260                         ctrl &= ~(1 << 6);      /* unmask INTA */
 261                 *((unsigned int *)hwif->select_data) = ctrl;
 262                 (void) pci_write_config_dword(dev, 0x40, ctrl);
 263
 264                 /*
 265                  * Set prefetch size to 512 bytes for both ports,
 266                  * but don't turn on/off prefetching here.
 267                  */
 268                 pci_write_config_byte(dev, 0x55, 0xee);
 269
 270 #ifdef __sparc_v9__
 271                 /*
 272                  * XXX: Reset the device, if we don't it will not respond to
 273                  *      SELECT_DRIVE() properly during first ide_probe_port().
 274                  */
 275                 timeout = 10000;
 276                 outb(12, hwif->io_ports.ctl_addr);
 277                 udelay(10);
 278                 outb(8, hwif->io_ports.ctl_addr);
 279                 do {
 280                         udelay(50);
 281                         stat = hwif->tp_ops->read_status(hwif);
 282                         if (stat == 0xff)
 283                                 break;
 284                 } while ((stat & ATA_BUSY) && --timeout);
 285 #endif
 286         }
 287
 288         if (!using_inta)
 289                 hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
 290
 291         if (!hwif->dma_base)
 292                 return;
 293
 294         outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
 295 }
 296
 297 static const struct ide_port_ops ns87415_port_ops = {
 298         .selectproc             = ns87415_selectproc,
 299 };
 300
 301 static const struct ide_dma_ops ns87415_dma_ops = {
 302         .dma_host_set           = ide_dma_host_set,
 303         .dma_setup              = ns87415_dma_setup,
 304         .dma_start              = ide_dma_start,
 305         .dma_end                = ns87415_dma_end,
 306         .dma_test_irq           = ide_dma_test_irq,
 307         .dma_lost_irq           = ide_dma_lost_irq,
 308         .dma_timer_expiry       = ide_dma_sff_timer_expiry,
 309         .dma_sff_read_status    = superio_dma_sff_read_status,
 310 };
 311
 312 static const struct ide_port_info ns87415_chipset __devinitdata = {
 313         .name           = DRV_NAME,
 314         .init_hwif      = init_hwif_ns87415,
 315         .port_ops       = &ns87415_port_ops,
 316         .dma_ops        = &ns87415_dma_ops,
 317         .host_flags     = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 318                           IDE_HFLAG_NO_ATAPI_DMA,
 319 };
 320
 321 static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 322 {
 323         struct ide_port_info d = ns87415_chipset;
 324
 325 #ifdef CONFIG_SUPERIO
 326         if (PCI_SLOT(dev->devfn) == 0xE) {
 327                 /* Built-in - assume it's under superio. */
 328                 d.init_iops = superio_init_iops;
 329                 d.tp_ops = &superio_tp_ops;
 330         }
 331 #endif
 332         return ide_pci_init_one(dev, &d, NULL);
 333 }
 334
 335 static const struct pci_device_id ns87415_pci_tbl[] = {
 336         { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
 337         { 0, },
 338 };
 339 MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
 340
 341 static struct pci_driver ns87415_pci_driver = {
 342         .name           = "NS87415_IDE",
 343         .id_table       = ns87415_pci_tbl,
 344         .probe          = ns87415_init_one,
 345         .remove         = ide_pci_remove,
 346         .suspend        = ide_pci_suspend,
 347         .resume         = ide_pci_resume,
 348 };
 349
 350 static int __init ns87415_ide_init(void)
 351 {
 352         return ide_pci_register_driver(&ns87415_pci_driver);
 353 }
 354
 355 static void __exit ns87415_ide_exit(void)
 356 {
 357         pci_unregister_driver(&ns87415_pci_driver);
 358 }
 359
 360 module_init(ns87415_ide_init);
 361 module_exit(ns87415_ide_exit);
 362
 363 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
 364 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
 365 MODULE_LICENSE("GPL");