?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sfc: SFT9001: Fix condition for LNPGA power-off
[linux-2.6/verdex.git] / drivers / net / sfc / tenxpress.c
blob9ecb77da954527a9dff367f4aa0b4674e7f94d17
1 /****************************************************************************
2 * Driver for Solarflare Solarstorm network controllers and boards
3 * Copyright 2007-2008 Solarflare Communications Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published
7 * by the Free Software Foundation, incorporated herein by reference.
8 */
9
10 #include <linux/delay.h>
11 #include <linux/seq_file.h>
12 #include "efx.h"
13 #include "mdio_10g.h"
14 #include "falcon.h"
15 #include "phy.h"
16 #include "falcon_hwdefs.h"
17 #include "boards.h"
18 #include "workarounds.h"
19 #include "selftest.h"
20
21 /* We expect these MMDs to be in the package. SFT9001 also has a
22 * clause 22 extension MMD, but since it doesn't have all the generic
23 * MMD registers it is pointless to include it here.
24 */
25 #define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PMAPMD | \
26 MDIO_MMDREG_DEVS_PCS | \
27 MDIO_MMDREG_DEVS_PHYXS | \
28 MDIO_MMDREG_DEVS_AN)
29
30 #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \
31 (1 << LOOPBACK_PCS) | \
32 (1 << LOOPBACK_PMAPMD) | \
33 (1 << LOOPBACK_NETWORK))
34
35 #define SFT9001_LOOPBACKS ((1 << LOOPBACK_GPHY) | \
36 (1 << LOOPBACK_PHYXS) | \
37 (1 << LOOPBACK_PCS) | \
38 (1 << LOOPBACK_PMAPMD) | \
39 (1 << LOOPBACK_NETWORK))
40
41 /* We complain if we fail to see the link partner as 10G capable this many
42 * times in a row (must be > 1 as sampling the autoneg. registers is racy)
43 */
44 #define MAX_BAD_LP_TRIES (5)
45
46 /* LASI Control */
47 #define PMA_PMD_LASI_CTRL 36866
48 #define PMA_PMD_LASI_STATUS 36869
49 #define PMA_PMD_LS_ALARM_LBN 0
50 #define PMA_PMD_LS_ALARM_WIDTH 1
51 #define PMA_PMD_TX_ALARM_LBN 1
52 #define PMA_PMD_TX_ALARM_WIDTH 1
53 #define PMA_PMD_RX_ALARM_LBN 2
54 #define PMA_PMD_RX_ALARM_WIDTH 1
55 #define PMA_PMD_AN_ALARM_LBN 3
56 #define PMA_PMD_AN_ALARM_WIDTH 1
57
58 /* Extended control register */
59 #define PMA_PMD_XCONTROL_REG 49152
60 #define PMA_PMD_EXT_GMII_EN_LBN 1
61 #define PMA_PMD_EXT_GMII_EN_WIDTH 1
62 #define PMA_PMD_EXT_CLK_OUT_LBN 2
63 #define PMA_PMD_EXT_CLK_OUT_WIDTH 1
64 #define PMA_PMD_LNPGA_POWERDOWN_LBN 8 /* SFX7101 only */
65 #define PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
66 #define PMA_PMD_EXT_CLK312_LBN 8 /* SFT9001 only */
67 #define PMA_PMD_EXT_CLK312_WIDTH 1
68 #define PMA_PMD_EXT_LPOWER_LBN 12
69 #define PMA_PMD_EXT_LPOWER_WIDTH 1
70 #define PMA_PMD_EXT_SSR_LBN 15
71 #define PMA_PMD_EXT_SSR_WIDTH 1
72
73 /* extended status register */
74 #define PMA_PMD_XSTATUS_REG 49153
75 #define PMA_PMD_XSTAT_FLP_LBN (12)
76
77 /* LED control register */
78 #define PMA_PMD_LED_CTRL_REG 49159
79 #define PMA_PMA_LED_ACTIVITY_LBN (3)
80
81 /* LED function override register */
82 #define PMA_PMD_LED_OVERR_REG 49161
83 /* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
84 #define PMA_PMD_LED_LINK_LBN (0)
85 #define PMA_PMD_LED_SPEED_LBN (2)
86 #define PMA_PMD_LED_TX_LBN (4)
87 #define PMA_PMD_LED_RX_LBN (6)
88 /* Override settings */
89 #define PMA_PMD_LED_AUTO (0) /* H/W control */
90 #define PMA_PMD_LED_ON (1)
91 #define PMA_PMD_LED_OFF (2)
92 #define PMA_PMD_LED_FLASH (3)
93 #define PMA_PMD_LED_MASK 3
94 /* All LEDs under hardware control */
95 #define PMA_PMD_LED_FULL_AUTO (0)
96 /* Green and Amber under hardware control, Red off */
97 #define PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
98
99 #define PMA_PMD_SPEED_ENABLE_REG 49192
100 #define PMA_PMD_100TX_ADV_LBN 1
101 #define PMA_PMD_100TX_ADV_WIDTH 1
102 #define PMA_PMD_1000T_ADV_LBN 2
103 #define PMA_PMD_1000T_ADV_WIDTH 1
104 #define PMA_PMD_10000T_ADV_LBN 3
105 #define PMA_PMD_10000T_ADV_WIDTH 1
106 #define PMA_PMD_SPEED_LBN 4
107 #define PMA_PMD_SPEED_WIDTH 4
108
109 /* Cable diagnostics - SFT9001 only */
110 #define PMA_PMD_CDIAG_CTRL_REG 49213
111 #define CDIAG_CTRL_IMMED_LBN 15
112 #define CDIAG_CTRL_BRK_LINK_LBN 12
113 #define CDIAG_CTRL_IN_PROG_LBN 11
114 #define CDIAG_CTRL_LEN_UNIT_LBN 10
115 #define CDIAG_CTRL_LEN_METRES 1
116 #define PMA_PMD_CDIAG_RES_REG 49174
117 #define CDIAG_RES_A_LBN 12
118 #define CDIAG_RES_B_LBN 8
119 #define CDIAG_RES_C_LBN 4
120 #define CDIAG_RES_D_LBN 0
121 #define CDIAG_RES_WIDTH 4
122 #define CDIAG_RES_OPEN 2
123 #define CDIAG_RES_OK 1
124 #define CDIAG_RES_INVALID 0
125 /* Set of 4 registers for pairs A-D */
126 #define PMA_PMD_CDIAG_LEN_REG 49175
127
128 /* Serdes control registers - SFT9001 only */
129 #define PMA_PMD_CSERDES_CTRL_REG 64258
130 /* Set the 156.25 MHz output to 312.5 MHz to drive Falcon's XMAC */
131 #define PMA_PMD_CSERDES_DEFAULT 0x000f
132
133 /* Misc register defines - SFX7101 only */
134 #define PCS_CLOCK_CTRL_REG 55297
135 #define PLL312_RST_N_LBN 2
136
137 #define PCS_SOFT_RST2_REG 55302
138 #define SERDES_RST_N_LBN 13
139 #define XGXS_RST_N_LBN 12
140
141 #define PCS_TEST_SELECT_REG 55303 /* PRM 10.5.8 */
142 #define CLK312_EN_LBN 3
143
144 /* PHYXS registers */
145 #define PHYXS_XCONTROL_REG 49152
146 #define PHYXS_RESET_LBN 15
147 #define PHYXS_RESET_WIDTH 1
148
149 #define PHYXS_TEST1 (49162)
150 #define LOOPBACK_NEAR_LBN (8)
151 #define LOOPBACK_NEAR_WIDTH (1)
152
153 #define PCS_10GBASET_STAT1 32
154 #define PCS_10GBASET_BLKLK_LBN 0
155 #define PCS_10GBASET_BLKLK_WIDTH 1
156
157 /* Boot status register */
158 #define PCS_BOOT_STATUS_REG 53248
159 #define PCS_BOOT_FATAL_ERR_LBN (0)
160 #define PCS_BOOT_PROGRESS_LBN (1)
161 #define PCS_BOOT_PROGRESS_WIDTH (2)
162 #define PCS_BOOT_COMPLETE_LBN (3)
163
164 #define PCS_BOOT_MAX_DELAY (100)
165 #define PCS_BOOT_POLL_DELAY (10)
166
167 /* 100M/1G PHY registers */
168 #define GPHY_XCONTROL_REG 49152
169 #define GPHY_ISOLATE_LBN 10
170 #define GPHY_ISOLATE_WIDTH 1
171 #define GPHY_DUPLEX_LBN 8
172 #define GPHY_DUPLEX_WIDTH 1
173 #define GPHY_LOOPBACK_NEAR_LBN 14
174 #define GPHY_LOOPBACK_NEAR_WIDTH 1
175
176 #define C22EXT_STATUS_REG 49153
177 #define C22EXT_STATUS_LINK_LBN 2
178 #define C22EXT_STATUS_LINK_WIDTH 1
179
180 #define C22EXT_MSTSLV_REG 49162
181 #define C22EXT_MSTSLV_1000_HD_LBN 10
182 #define C22EXT_MSTSLV_1000_HD_WIDTH 1
183 #define C22EXT_MSTSLV_1000_FD_LBN 11
184 #define C22EXT_MSTSLV_1000_FD_WIDTH 1
185
186 /* Time to wait between powering down the LNPGA and turning off the power
187 * rails */
188 #define LNPGA_PDOWN_WAIT (HZ / 5)
189
190 static int crc_error_reset_threshold = 100;
191 module_param(crc_error_reset_threshold, int, 0644);
192 MODULE_PARM_DESC(crc_error_reset_threshold,
193 "Max number of CRC errors before XAUI reset");
194
195 struct tenxpress_phy_data {
196 enum efx_loopback_mode loopback_mode;
197 atomic_t bad_crc_count;
198 enum efx_phy_mode phy_mode;
199 int bad_lp_tries;
200 };
201
202 void tenxpress_crc_err(struct efx_nic *efx)
203 {
204 struct tenxpress_phy_data *phy_data = efx->phy_data;
205 if (phy_data != NULL)
206 atomic_inc(&phy_data->bad_crc_count);
207 }
208
209 static ssize_t show_phy_short_reach(struct device *dev,
210 struct device_attribute *attr, char *buf)
211 {
212 struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
213 int reg;
214
215 reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
216 MDIO_PMAPMD_10GBT_TXPWR);
217 return sprintf(buf, "%d\n",
218 !!(reg & (1 << MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN)));
219 }
220
221 static ssize_t set_phy_short_reach(struct device *dev,
222 struct device_attribute *attr,
223 const char *buf, size_t count)
224 {
225 struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
226
227 rtnl_lock();
228 mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
229 MDIO_PMAPMD_10GBT_TXPWR,
230 MDIO_PMAPMD_10GBT_TXPWR_SHORT_LBN,
231 count != 0 && *buf != '0');
232 efx_reconfigure_port(efx);
233 rtnl_unlock();
234
235 return count;
236 }
237
238 static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach,
239 set_phy_short_reach);
240
241 /* Check that the C166 has booted successfully */
242 static int tenxpress_phy_check(struct efx_nic *efx)
243 {
244 int phy_id = efx->mii.phy_id;
245 int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
246 int boot_stat;
247
248 /* Wait for the boot to complete (or not) */
249 while (count) {
250 boot_stat = mdio_clause45_read(efx, phy_id,
251 MDIO_MMD_PCS,
252 PCS_BOOT_STATUS_REG);
253 if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
254 break;
255 count--;
256 udelay(PCS_BOOT_POLL_DELAY);
257 }
258
259 if (!count) {
260 EFX_ERR(efx, "%s: PHY boot timed out. Last status "
261 "%x\n", __func__,
262 (boot_stat >> PCS_BOOT_PROGRESS_LBN) &
263 ((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
264 return -ETIMEDOUT;
265 }
266
267 return 0;
268 }
269
270 static int tenxpress_init(struct efx_nic *efx)
271 {
272 int phy_id = efx->mii.phy_id;
273 int reg;
274 int rc;
275
276 if (efx->phy_type == PHY_TYPE_SFX7101) {
277 /* Enable 312.5 MHz clock */
278 mdio_clause45_write(efx, phy_id,
279 MDIO_MMD_PCS, PCS_TEST_SELECT_REG,
280 1 << CLK312_EN_LBN);
281 } else {
282 /* Enable 312.5 MHz clock and GMII */
283 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
284 PMA_PMD_XCONTROL_REG);
285 reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) |
286 (1 << PMA_PMD_EXT_CLK_OUT_LBN) |
287 (1 << PMA_PMD_EXT_CLK312_LBN));
288 mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
289 PMA_PMD_XCONTROL_REG, reg);
290 mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
291 GPHY_XCONTROL_REG, GPHY_ISOLATE_LBN,
292 false);
293 }
294
295 rc = tenxpress_phy_check(efx);
296 if (rc < 0)
297 return rc;
298
299 /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
300 if (efx->phy_type == PHY_TYPE_SFX7101) {
301 mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
302 PMA_PMD_LED_CTRL_REG,
303 PMA_PMA_LED_ACTIVITY_LBN,
304 true);
305 mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
306 PMA_PMD_LED_OVERR_REG, PMA_PMD_LED_DEFAULT);
307 }
308
309 return rc;
310 }
311
312 static int tenxpress_phy_init(struct efx_nic *efx)
313 {
314 struct tenxpress_phy_data *phy_data;
315 int rc = 0;
316
317 phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
318 if (!phy_data)
319 return -ENOMEM;
320 efx->phy_data = phy_data;
321 phy_data->phy_mode = efx->phy_mode;
322
323 if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
324 if (efx->phy_type == PHY_TYPE_SFT9001A) {
325 int reg;
326 reg = mdio_clause45_read(efx, efx->mii.phy_id,
327 MDIO_MMD_PMAPMD,
328 PMA_PMD_XCONTROL_REG);
329 reg |= (1 << PMA_PMD_EXT_SSR_LBN);
330 mdio_clause45_write(efx, efx->mii.phy_id,
331 MDIO_MMD_PMAPMD,
332 PMA_PMD_XCONTROL_REG, reg);
333 mdelay(200);
334 }
335
336 rc = mdio_clause45_wait_reset_mmds(efx,
337 TENXPRESS_REQUIRED_DEVS);
338 if (rc < 0)
339 goto fail;
340
341 rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
342 if (rc < 0)
343 goto fail;
344 }
345
346 rc = tenxpress_init(efx);
347 if (rc < 0)
348 goto fail;
349
350 if (efx->phy_type == PHY_TYPE_SFT9001B) {
351 rc = device_create_file(&efx->pci_dev->dev,
352 &dev_attr_phy_short_reach);
353 if (rc)
354 goto fail;
355 }
356
357 schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
358
359 /* Let XGXS and SerDes out of reset */
360 falcon_reset_xaui(efx);
361
362 return 0;
363
364 fail:
365 kfree(efx->phy_data);
366 efx->phy_data = NULL;
367 return rc;
368 }
369
370 /* Perform a "special software reset" on the PHY. The caller is
371 * responsible for saving and restoring the PHY hardware registers
372 * properly, and masking/unmasking LASI */
373 static int tenxpress_special_reset(struct efx_nic *efx)
374 {
375 int rc, reg;
376
377 /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
378 * a special software reset can glitch the XGMAC sufficiently for stats
379 * requests to fail. Since we don't often special_reset, just lock. */
380 spin_lock(&efx->stats_lock);
381
382 /* Initiate reset */
383 reg = mdio_clause45_read(efx, efx->mii.phy_id,
384 MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
385 reg |= (1 << PMA_PMD_EXT_SSR_LBN);
386 mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
387 PMA_PMD_XCONTROL_REG, reg);
388
389 mdelay(200);
390
391 /* Wait for the blocks to come out of reset */
392 rc = mdio_clause45_wait_reset_mmds(efx,
393 TENXPRESS_REQUIRED_DEVS);
394 if (rc < 0)
395 goto unlock;
396
397 /* Try and reconfigure the device */
398 rc = tenxpress_init(efx);
399 if (rc < 0)
400 goto unlock;
401
402 /* Wait for the XGXS state machine to churn */
403 mdelay(10);
404 unlock:
405 spin_unlock(&efx->stats_lock);
406 return rc;
407 }
408
409 static void sfx7101_check_bad_lp(struct efx_nic *efx, bool link_ok)
410 {
411 struct tenxpress_phy_data *pd = efx->phy_data;
412 int phy_id = efx->mii.phy_id;
413 bool bad_lp;
414 int reg;
415
416 if (link_ok) {
417 bad_lp = false;
418 } else {
419 /* Check that AN has started but not completed. */
420 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
421 MDIO_AN_STATUS);
422 if (!(reg & (1 << MDIO_AN_STATUS_LP_AN_CAP_LBN)))
423 return; /* LP status is unknown */
424 bad_lp = !(reg & (1 << MDIO_AN_STATUS_AN_DONE_LBN));
425 if (bad_lp)
426 pd->bad_lp_tries++;
427 }
428
429 /* Nothing to do if all is well and was previously so. */
430 if (!pd->bad_lp_tries)
431 return;
432
433 /* Use the RX (red) LED as an error indicator once we've seen AN
434 * failure several times in a row, and also log a message. */
435 if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
436 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
437 PMA_PMD_LED_OVERR_REG);
438 reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN);
439 if (!bad_lp) {
440 reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN;
441 } else {
442 reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN;
443 EFX_ERR(efx, "appears to be plugged into a port"
444 " that is not 10GBASE-T capable. The PHY"
445 " supports 10GBASE-T ONLY, so no link can"
446 " be established\n");
447 }
448 mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
449 PMA_PMD_LED_OVERR_REG, reg);
450 pd->bad_lp_tries = bad_lp;
451 }
452 }
453
454 static bool sfx7101_link_ok(struct efx_nic *efx)
455 {
456 return mdio_clause45_links_ok(efx,
457 MDIO_MMDREG_DEVS_PMAPMD |
458 MDIO_MMDREG_DEVS_PCS |
459 MDIO_MMDREG_DEVS_PHYXS);
460 }
461
462 static bool sft9001_link_ok(struct efx_nic *efx, struct ethtool_cmd *ecmd)
463 {
464 int phy_id = efx->mii.phy_id;
465 u32 reg;
466
467 if (efx_phy_mode_disabled(efx->phy_mode))
468 return false;
469 else if (efx->loopback_mode == LOOPBACK_GPHY)
470 return true;
471 else if (efx->loopback_mode)
472 return mdio_clause45_links_ok(efx,
473 MDIO_MMDREG_DEVS_PMAPMD |
474 MDIO_MMDREG_DEVS_PHYXS);
475
476 /* We must use the same definition of link state as LASI,
477 * otherwise we can miss a link state transition
478 */
479 if (ecmd->speed == 10000) {
480 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
481 PCS_10GBASET_STAT1);
482 return reg & (1 << PCS_10GBASET_BLKLK_LBN);
483 } else {
484 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
485 C22EXT_STATUS_REG);
486 return reg & (1 << C22EXT_STATUS_LINK_LBN);
487 }
488 }
489
490 static void tenxpress_ext_loopback(struct efx_nic *efx)
491 {
492 int phy_id = efx->mii.phy_id;
493
494 mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS,
495 PHYXS_TEST1, LOOPBACK_NEAR_LBN,
496 efx->loopback_mode == LOOPBACK_PHYXS);
497 if (efx->phy_type != PHY_TYPE_SFX7101)
498 mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
499 GPHY_XCONTROL_REG,
500 GPHY_LOOPBACK_NEAR_LBN,
501 efx->loopback_mode == LOOPBACK_GPHY);
502 }
503
504 static void tenxpress_low_power(struct efx_nic *efx)
505 {
506 int phy_id = efx->mii.phy_id;
507
508 if (efx->phy_type == PHY_TYPE_SFX7101)
509 mdio_clause45_set_mmds_lpower(
510 efx, !!(efx->phy_mode & PHY_MODE_LOW_POWER),
511 TENXPRESS_REQUIRED_DEVS);
512 else
513 mdio_clause45_set_flag(
514 efx, phy_id, MDIO_MMD_PMAPMD,
515 PMA_PMD_XCONTROL_REG, PMA_PMD_EXT_LPOWER_LBN,
516 !!(efx->phy_mode & PHY_MODE_LOW_POWER));
517 }
518
519 static void tenxpress_phy_reconfigure(struct efx_nic *efx)
520 {
521 struct tenxpress_phy_data *phy_data = efx->phy_data;
522 struct ethtool_cmd ecmd;
523 bool phy_mode_change, loop_reset, loop_toggle, loopback;
524
525 if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
526 phy_data->phy_mode = efx->phy_mode;
527 return;
528 }
529
530 tenxpress_low_power(efx);
531
532 phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
533 phy_data->phy_mode != PHY_MODE_NORMAL);
534 loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks;
535 loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks);
536 loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
537 LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
538
539 if (loop_reset || loop_toggle || loopback || phy_mode_change) {
540 int rc;
541
542 efx->phy_op->get_settings(efx, &ecmd);
543
544 if (loop_reset || phy_mode_change) {
545 tenxpress_special_reset(efx);
546
547 /* Reset XAUI if we were in 10G, and are staying
548 * in 10G. If we're moving into and out of 10G
549 * then xaui will be reset anyway */
550 if (EFX_IS10G(efx))
551 falcon_reset_xaui(efx);
552 }
553
554 if (efx->phy_type != PHY_TYPE_SFX7101) {
555 /* Only change autoneg once, on coming out or
556 * going into loopback */
557 if (loop_toggle)
558 ecmd.autoneg = !loopback;
559 if (loopback) {
560 ecmd.duplex = DUPLEX_FULL;
561 if (efx->loopback_mode == LOOPBACK_GPHY)
562 ecmd.speed = SPEED_1000;
563 else
564 ecmd.speed = SPEED_10000;
565 }
566 }
567
568 rc = efx->phy_op->set_settings(efx, &ecmd);
569 WARN_ON(rc);
570 }
571
572 mdio_clause45_transmit_disable(efx);
573 mdio_clause45_phy_reconfigure(efx);
574 tenxpress_ext_loopback(efx);
575
576 phy_data->loopback_mode = efx->loopback_mode;
577 phy_data->phy_mode = efx->phy_mode;
578
579 if (efx->phy_type == PHY_TYPE_SFX7101) {
580 efx->link_speed = 10000;
581 efx->link_fd = true;
582 efx->link_up = sfx7101_link_ok(efx);
583 } else {
584 efx->phy_op->get_settings(efx, &ecmd);
585 efx->link_speed = ecmd.speed;
586 efx->link_fd = ecmd.duplex == DUPLEX_FULL;
587 efx->link_up = sft9001_link_ok(efx, &ecmd);
588 }
589 efx->link_fc = mdio_clause45_get_pause(efx);
590 }
591
592 /* Poll PHY for interrupt */
593 static void tenxpress_phy_poll(struct efx_nic *efx)
594 {
595 struct tenxpress_phy_data *phy_data = efx->phy_data;
596 bool change = false, link_ok;
597 unsigned link_fc;
598
599 if (efx->phy_type == PHY_TYPE_SFX7101) {
600 link_ok = sfx7101_link_ok(efx);
601 if (link_ok != efx->link_up) {
602 change = true;
603 } else {
604 link_fc = mdio_clause45_get_pause(efx);
605 if (link_fc != efx->link_fc)
606 change = true;
607 }
608 sfx7101_check_bad_lp(efx, link_ok);
609 } else if (efx->loopback_mode) {
610 bool link_ok = sft9001_link_ok(efx, NULL);
611 if (link_ok != efx->link_up)
612 change = true;
613 } else {
614 u32 status = mdio_clause45_read(efx, efx->mii.phy_id,
615 MDIO_MMD_PMAPMD,
616 PMA_PMD_LASI_STATUS);
617 if (status & (1 << PMA_PMD_LS_ALARM_LBN))
618 change = true;
619 }
620
621 if (change)
622 falcon_sim_phy_event(efx);
623
624 if (phy_data->phy_mode != PHY_MODE_NORMAL)
625 return;
626
627 if (EFX_WORKAROUND_10750(efx) &&
628 atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
629 EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
630 falcon_reset_xaui(efx);
631 atomic_set(&phy_data->bad_crc_count, 0);
632 }
633 }
634
635 static void tenxpress_phy_fini(struct efx_nic *efx)
636 {
637 int reg;
638
639 if (efx->phy_type == PHY_TYPE_SFT9001B)
640 device_remove_file(&efx->pci_dev->dev,
641 &dev_attr_phy_short_reach);
642
643 if (efx->phy_type == PHY_TYPE_SFX7101) {
644 /* Power down the LNPGA */
645 reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
646 mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
647 PMA_PMD_XCONTROL_REG, reg);
648
649 /* Waiting here ensures that the board fini, which can turn
650 * off the power to the PHY, won't get run until the LNPGA
651 * powerdown has been given long enough to complete. */
652 schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
653 }
654
655 kfree(efx->phy_data);
656 efx->phy_data = NULL;
657 }
658
659
660 /* Set the RX and TX LEDs and Link LED flashing. The other LEDs
661 * (which probably aren't wired anyway) are left in AUTO mode */
662 void tenxpress_phy_blink(struct efx_nic *efx, bool blink)
663 {
664 int reg;
665
666 if (blink)
667 reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) |
668 (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) |
669 (PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN);
670 else
671 reg = PMA_PMD_LED_DEFAULT;
672
673 mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
674 PMA_PMD_LED_OVERR_REG, reg);
675 }
676
677 static const char *const sfx7101_test_names[] = {
678 "bist"
679 };
680
681 static int
682 sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags)
683 {
684 int rc;
685
686 if (!(flags & ETH_TEST_FL_OFFLINE))
687 return 0;
688
689 /* BIST is automatically run after a special software reset */
690 rc = tenxpress_special_reset(efx);
691 results[0] = rc ? -1 : 1;
692 return rc;
693 }
694
695 static const char *const sft9001_test_names[] = {
696 "bist",
697 "cable.pairA.status",
698 "cable.pairB.status",
699 "cable.pairC.status",
700 "cable.pairD.status",
701 "cable.pairA.length",
702 "cable.pairB.length",
703 "cable.pairC.length",
704 "cable.pairD.length",
705 };
706
707 static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
708 {
709 struct ethtool_cmd ecmd;
710 int phy_id = efx->mii.phy_id;
711 int rc = 0, rc2, i, res_reg;
712
713 if (!(flags & ETH_TEST_FL_OFFLINE))
714 return 0;
715
716 efx->phy_op->get_settings(efx, &ecmd);
717
718 /* Initialise cable diagnostic results to unknown failure */
719 for (i = 1; i < 9; ++i)
720 results[i] = -1;
721
722 /* Run cable diagnostics; wait up to 5 seconds for them to complete.
723 * A cable fault is not a self-test failure, but a timeout is. */
724 mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
725 PMA_PMD_CDIAG_CTRL_REG,
726 (1 << CDIAG_CTRL_IMMED_LBN) |
727 (1 << CDIAG_CTRL_BRK_LINK_LBN) |
728 (CDIAG_CTRL_LEN_METRES << CDIAG_CTRL_LEN_UNIT_LBN));
729 i = 0;
730 while (mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
731 PMA_PMD_CDIAG_CTRL_REG) &
732 (1 << CDIAG_CTRL_IN_PROG_LBN)) {
733 if (++i == 50) {
734 rc = -ETIMEDOUT;
735 goto reset;
736 }
737 msleep(100);
738 }
739 res_reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
740 PMA_PMD_CDIAG_RES_REG);
741 for (i = 0; i < 4; i++) {
742 int pair_res =
743 (res_reg >> (CDIAG_RES_A_LBN - i * CDIAG_RES_WIDTH))
744 & ((1 << CDIAG_RES_WIDTH) - 1);
745 int len_reg = mdio_clause45_read(efx, efx->mii.phy_id,
746 MDIO_MMD_PMAPMD,
747 PMA_PMD_CDIAG_LEN_REG + i);
748 if (pair_res == CDIAG_RES_OK)
749 results[1 + i] = 1;
750 else if (pair_res == CDIAG_RES_INVALID)
751 results[1 + i] = -1;
752 else
753 results[1 + i] = -pair_res;
754 if (pair_res != CDIAG_RES_INVALID &&
755 pair_res != CDIAG_RES_OPEN &&
756 len_reg != 0xffff)
757 results[5 + i] = len_reg;
758 }
759
760 /* We must reset to exit cable diagnostic mode. The BIST will
761 * also run when we do this. */
762 reset:
763 rc2 = tenxpress_special_reset(efx);
764 results[0] = rc2 ? -1 : 1;
765 if (!rc)
766 rc = rc2;
767
768 rc2 = efx->phy_op->set_settings(efx, &ecmd);
769 if (!rc)
770 rc = rc2;
771
772 return rc;
773 }
774
775 static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
776 {
777 int phy = efx->mii.phy_id;
778 u32 lpa = 0;
779 int reg;
780
781 if (efx->phy_type != PHY_TYPE_SFX7101) {
782 reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
783 C22EXT_MSTSLV_REG);
784 if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
785 lpa |= ADVERTISED_1000baseT_Half;
786 if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
787 lpa |= ADVERTISED_1000baseT_Full;
788 }
789 reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
790 if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
791 lpa |= ADVERTISED_10000baseT_Full;
792 return lpa;
793 }
794
795 static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
796 {
797 mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
798 tenxpress_get_xnp_lpa(efx));
799 ecmd->supported |= SUPPORTED_10000baseT_Full;
800 ecmd->advertising |= ADVERTISED_10000baseT_Full;
801 }
802
803 static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
804 {
805 int phy_id = efx->mii.phy_id;
806 u32 xnp_adv = 0;
807 int reg;
808
809 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
810 PMA_PMD_SPEED_ENABLE_REG);
811 if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
812 xnp_adv |= ADVERTISED_100baseT_Full;
813 if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
814 xnp_adv |= ADVERTISED_1000baseT_Full;
815 if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
816 xnp_adv |= ADVERTISED_10000baseT_Full;
817
818 mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
819 tenxpress_get_xnp_lpa(efx));
820
821 ecmd->supported |= (SUPPORTED_100baseT_Half |
822 SUPPORTED_100baseT_Full |
823 SUPPORTED_1000baseT_Full);
824
825 /* Use the vendor defined C22ext register for duplex settings */
826 if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
827 reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
828 GPHY_XCONTROL_REG);
829 ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
830 DUPLEX_FULL : DUPLEX_HALF);
831 }
832 }
833
834 static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
835 {
836 int phy_id = efx->mii.phy_id;
837 int rc;
838
839 rc = mdio_clause45_set_settings(efx, ecmd);
840 if (rc)
841 return rc;
842
843 if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
844 mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
845 GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
846 ecmd->duplex == DUPLEX_FULL);
847
848 return rc;
849 }
850
851 static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
852 {
853 int phy = efx->mii.phy_id;
854 int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
855 PMA_PMD_SPEED_ENABLE_REG);
856 bool enabled;
857
858 reg &= ~((1 << 2) | (1 << 3));
859 if (EFX_WORKAROUND_13204(efx) &&
860 (advertising & ADVERTISED_100baseT_Full))
861 reg |= 1 << PMA_PMD_100TX_ADV_LBN;
862 if (advertising & ADVERTISED_1000baseT_Full)
863 reg |= 1 << PMA_PMD_1000T_ADV_LBN;
864 if (advertising & ADVERTISED_10000baseT_Full)
865 reg |= 1 << PMA_PMD_10000T_ADV_LBN;
866 mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
867 PMA_PMD_SPEED_ENABLE_REG, reg);
868
869 enabled = (advertising &
870 (ADVERTISED_1000baseT_Half |
871 ADVERTISED_1000baseT_Full |
872 ADVERTISED_10000baseT_Full));
873 if (EFX_WORKAROUND_13204(efx))
874 enabled |= (advertising & ADVERTISED_100baseT_Full);
875 return enabled;
876 }
877
878 struct efx_phy_operations falcon_sfx7101_phy_ops = {
879 .macs = EFX_XMAC,
880 .init = tenxpress_phy_init,
881 .reconfigure = tenxpress_phy_reconfigure,
882 .poll = tenxpress_phy_poll,
883 .fini = tenxpress_phy_fini,
884 .clear_interrupt = efx_port_dummy_op_void,
885 .get_settings = sfx7101_get_settings,
886 .set_settings = mdio_clause45_set_settings,
887 .num_tests = ARRAY_SIZE(sfx7101_test_names),
888 .test_names = sfx7101_test_names,
889 .run_tests = sfx7101_run_tests,
890 .mmds = TENXPRESS_REQUIRED_DEVS,
891 .loopbacks = SFX7101_LOOPBACKS,
892 };
893
894 struct efx_phy_operations falcon_sft9001_phy_ops = {
895 .macs = EFX_GMAC | EFX_XMAC,
896 .init = tenxpress_phy_init,
897 .reconfigure = tenxpress_phy_reconfigure,
898 .poll = tenxpress_phy_poll,
899 .fini = tenxpress_phy_fini,
900 .clear_interrupt = efx_port_dummy_op_void,
901 .get_settings = sft9001_get_settings,
902 .set_settings = sft9001_set_settings,
903 .set_xnp_advertise = sft9001_set_xnp_advertise,
904 .num_tests = ARRAY_SIZE(sft9001_test_names),
905 .test_names = sft9001_test_names,
906 .run_tests = sft9001_run_tests,
907 .mmds = TENXPRESS_REQUIRED_DEVS,
908 .loopbacks = SFT9001_LOOPBACKS,
909 };
Verdex Pro support